华为IAD 132E(T)升级方法

华为IAD 132E(T)升级方法
root
admin
en
conf te
先固定设备IP 地址
设置TFTP 服务文件目录。

将4个文件拷贝到服务目录下。

以下设备IP地址设置为192.168.1.93 服务器地址设置为：192.168.1.55为例
config te
ip add 192.168.1.93 255.255.255.0
load packet tftp 192.168.1.55 iad_packet
load packet tftp 192.168.1.55 TS3202.pts
load logic tftp 192.168.1.55 Iad_cpld
华为超级密码
hwamg
amg5000
restore default-config
以下升级步骤实际升级
High Precise CpuTickBase = 0x17d0608
PerformanceBase = 0xa5593
Initialize and check system config data... complete
Start Initialize SPI.
SPI module initialized OK.
**************************************************
-> Lanswitch self test OK.
-> Dsp self test OK.
-> ASID on slot 1 simple self test ok!
-> ASID on slot 2 simple self test ok!
-> No board on slot 3!
**************************************************
Wait agent ...
Begin Register to IADMS............................................
Register time out
Not upgrade file
Begin search system config data changed on initialize.
If we found system config data changed on initialize, we will write system initialize data automatically!
We found nothing changed
******************************************
* *
* IAD2000 Integrated Access Device *
* *
******************************************
Copyright(C) 2002-2004 by HUAWEI TECH CO., LTD
Host name:
Phone:
User name (<=15 chars):
User password (<=15 chars):
Incorrect User's Name or Password!
User name (<=15 chars):root
User password (<=15 chars):
IAD2000>enable
IAD2000#configure terminal
IAD2000(config)#ip address 192.168.1.93 255.255.255.0
{ <cr>|gateway-ip<I> }:
Command:
ip address 192.168.1.93 255.255.255.0
Changing net parameter may affect current service, continue?[Y|N]:y Command executing, please wait...
--------------------------------------------------
Device network configuration is:
IP address: 192.168.1.93
Subnet mask: 255.255.255.0
Default Gateway: 0.0.0.0
--------------------------------------------------
Begin Register to IADMS............................................ Register time out
IAD2000(config)#language
当前语言模式已切换
IAD2000(config)#load packet tftp 192.168.1.55 iad_packet
加载(备份)命令开始进行，请耐心等待并注意结果进度显示
加载(备份，复制)进行过程中，任何复位或倒换操作都会导致失败
并引发不可预知的严重后果.
请使用命令'show progress load'查询进度提示信息
IAD2000(config)#
IAD2000(config)#
操作类型: 加载
文件类型: 打包文件
操作阶段: 文件从外部传向板内
进度: 10%
操作类型: 加载
文件类型: 打包文件
操作阶段: 文件从外部传向板内
进度: 35%
操作类型: 加载
文件类型: 打包文件
操作阶段: 文件从外部传向板内
进度: 60%
操作类型: 加载
文件类型: 打包文件
操作阶段: 文件从外部传向板内
进度: 85%
操作类型: 加载
文件类型: 打包文件
操作阶段: 文件从外部传向板内
操作类型: 加载
文件类型: 打包文件
操作阶段: 文件从外部传向板内进度: 95%
操作类型: 加载
文件类型: 打包文件
操作阶段: 文件从外部传向板内进度: 95%
操作类型: 加载
文件类型: 打包文件
操作阶段: 文件从外部传向板内进度: 95%
操作类型: 加载
文件类型: 打包文件
操作阶段: 文件从外部传向板内进度: 95%
操作类型: 加载
文件类型: 打包文件
操作阶段: 文件从外部传向板内进度: 95%
操作类型: 加载
文件类型: 打包文件
操作阶段: 文件从外部传向板内进度: 95%
操作类型: 加载
文件类型: 打包文件
操作阶段: 保存文件
进度: 0%
操作类型: 加载
文件类型: 打包文件
操作阶段: 保存文件
进度: 6%
操作类型: 加载
文件类型: 打包文件
操作阶段: 保存文件
操作类型: 加载
文件类型: 打包文件操作阶段: 保存文件进度: 24%
操作类型: 加载
文件类型: 打包文件操作阶段: 保存文件进度: 32%
操作类型: 加载
文件类型: 打包文件操作阶段: 保存文件进度: 41%
操作类型: 加载
文件类型: 打包文件操作阶段: 保存文件进度: 50%
操作类型: 加载
文件类型: 打包文件操作阶段: 保存文件进度: 58%
操作类型: 加载
文件类型: 打包文件操作阶段: 保存文件进度: 67%
操作类型: 加载
文件类型: 打包文件操作阶段: 保存文件进度: 76%
操作类型: 加载
文件类型: 打包文件操作阶段: 保存文件进度: 84%
操作类型: 加载
文件类型: 打包文件操作阶段: 保存文件
操作类型: 加载
文件类型: 打包文件
操作阶段: 保存文件
进度: 99%
操作类型: 加载
文件类型: 打包文件
操作阶段: 保存文件
进度: 99%
操作类型: 加载
文件类型: 打包文件
操作阶段: 保存文件
进度: 99%
操作类型: 加载
文件类型: 打包文件
操作阶段: 保存文件
进度: 99%
操作类型: 加载
文件类型: 打包文件
操作阶段: 保存文件
进度: 99%
操作类型: 加载
文件类型: 打包文件
操作阶段: 保存文件
进度: 99%
操作类型: 加载
文件类型: 打包文件
操作结果: 操作成功
失败原因: 无
IAD2000#reboot
配置数据已修改，复位将导致配置数据丢失，是否继续? [Y|N]:y 确实要复位系统? [Y|N]:y
IAD2000#
Debug COM Initialed successfully.
Press 't' to Test SDRAM :
Test_startCSetup.
Begin to init bcm5325
Disable to auto-check link cable type.
Init BCM5325 OK.
*************************************************************************
HUAWEI IAD2000 System Boot
Copyright 1988-2002 Huawei Tech. Co., Ltd.
************************************************************************* CPU: HUAWEI AG11CVP
vxWorks Version: 5.4.2
Creation date: Mar 14 2005, 12:08:00
Board Type: Unknow board type 6
SDRAM Size: 32 M
Boot from: Basic bootrom
Logic1 check...................................success
Logic2 check...................................success
BIOS Version : 0219
LogicA Version : (EPLD) 5
LogicB Version : (EPLD) 1
PCB Version : <Unknow board type 6> REV 1
BSP version:........................0x..............1.2/dffdf83 (
Debug setRootTaskrial baudr): ate..............memPartFree.........: invalid block ....0x9600d7a938
Debug in partition netw0xork MAC address...b94ccc............... ......00 1e 10 19 e4 1b
Debug network IP address .......................192.168.1.93
boot device : fei
unit number : 0
processor number : 0
host name : host
file name : vxWorks
inet on ethernet (e) : 192.168.1.93
host inet (h) : 192.168.100.155
gateway inet (g) : 0.0.0.0
user (u) : cvp
ftp password (pw) : cvp
flags (f) : 0x0
target name (tn) : target
Attaching network interface lo0... done.
Attaching network interface fei0... done.
Hardware is being initialized now.....!
System now configuring tcp/ip stack,Please wait....
Tcp/ip setting,ip(192.168.1.93),subnetmask(255.255.255.0),default
gateway(0.0.0.0).
Hardware is testing now.....!
Hardware tested ok!
******************************************
* *
* *
* IAD2000 BOOTROM, Version 634 *
* *
******************************************
Copyright(C) 2002-2004 by HUAWEI TECH CO., LTD
Please press CTRL+B to enter bootmenu,other key to boot! remain 0s
Begin to check program area in flash...done.
Copy program from area(1) to ram, Please wait...
Expand file to ram...
............................................................................ .............................................................................. .............................................................................. .............................................................................. .............................................................................. .............................................................................. ..............................................................................
.............................................................................. .............................................................................. .............................................................................. .........Starting at 0x10000...
Attaching network interface fei0... done.
Attached TCP/IP interface to fei unit 0
Attaching network interface lo0... done.
NFS client support not included.
done.
Disable to auto-check link cable type.
Init BCM5325 OK.
+++++++++++++++++++++++++ Reset Information +++++++++++++++++++++++++
5b323030392d3038 2d30372030343a30 323a30305d757365 72207265626f6f74
0000000000000000 0000000000000000
[2009-08-07 04:02:00]user reboot
The PreTask is TICK , the next task is T07M
The Last Isr tick is 89664, switch tick is 89664
Sender 1 , Receiver 15, Tick 89664
Reserve error message:
File:(null) , Line: 367, Timestamp: 0 ticks, Count: 5, Parameters:0x7
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
High Precise CpuTickBase = 0x17ce9fe
PerformanceBase = 0x9cd31
Initialize and check system config data...
Table [44] Desc ucFieldNum 3, Init ucFieldNum 4
Upgrade DB ... complete
Start Initialize SPI.
SPI module initialized OK.
Generate local language for new application, please wait a plete!
Generate general language for new application, please wait a plete!
**************************************************
-> Lanswitch self test OK.
-> Dsp self test OK.
-> ASID on slot 1 simple self test ok!
-> ASID on slot 2 simple self test ok!
-> No board on slot 3!
**************************************************
Wait agent ...
Begin Register to IADMS............................................ Register time out
Not upgrade file
Now writing system initialize data to flash, please wait a moment...
1 block written
2 block written
3 block written
4 block written
Total data write complete
******************************************
* *
* IAD2000 Integrated Access Device *
* *
******************************************
Copyright(C) 2002-2004 by HUAWEI TECH CO., LTD
Host name:
Phone:
User name (<=15 chars):root
User password (<=15 chars):
IAD2000>enable
IAD2000#configure terminal
IAD2000(config)#load packet tftp 192.168.1.55 TS3202.pts
Load(backup) begins. This process will take several minutes. If it is
interrupted unproperly, it will fail. Please wait and check the result. Besides, you can use command 'show progress load' to display the progress information.
IAD2000(config)#
OPERATION TYPE: Load operation
FILE TYPE: Packet file
OPERATION STAGE: Loading file to the board
PROCESS: 10%
OPERATION TYPE: Load operation
FILE TYPE: Packet file
OPERATION STAGE: Loading file to the board
PROCESS: 35%
OPERATION TYPE: Load operation
FILE TYPE: Packet file
OPERATION STAGE: Loading file to the board
PROCESS: 60%
OPERATION TYPE: Load operation
FILE TYPE: Packet file
OPERATION STAGE: Loading file to the board
PROCESS: 85%
OPERATION TYPE: Load operation
FILE TYPE: Packet file
OPERATION STAGE: Loading file to the board
PROCESS: 95%
OPERATION TYPE: Load operation
FILE TYPE: Packet file
OPERATION STAGE: Loading file to the board
PROCESS: 95%
OPERATION TYPE: Load operation
FILE TYPE: Packet file
OPERATION STAGE: Loading file to the board
PROCESS: 95%
programVersion is IAD2000V300R001C07SPC700B011
file type begin len crc
-------------------------------------------
0 bios 5 (316) 4a48e 6a75 OK
1 program 0 (304586) 2203dd 031a OK
2 local_res
3 (2533799) 6d2f 98b7 OK
3 gen_res
4 (2561750) 6d2f 98b7 OK
4 voice 6 (2589701) 1c4e
5 5ee1 OK
5 dsp1 7 (2705642) d2 2ee5 OK
6 dsp2 8 (2705852) edf6 8eb4 OK
7 UNKNOWN e (2766770) 72042 313b OK
TOTAL 3157f4 417e OK
------------------V3 check right-------------------------
OPERATION TYPE: Load operation
FILE TYPE: Packet file
OPERATION STAGE: Saving file
PROCESS: 0%
done.
OPERATION TYPE: Load operation FILE TYPE: Packet file
OPERATION STAGE: Saving file
PROCESS: 0%
OPERATION TYPE: Load operation FILE TYPE: Packet file
OPERATION STAGE: Saving file
PROCESS: 0%
OPERATION TYPE: Load operation FILE TYPE: Packet file
OPERATION STAGE: Saving file
PROCESS: 0%
OPERATION TYPE: Load operation FILE TYPE: Packet file
OPERATION STAGE: Saving file
PROCESS: 0%
OPERATION TYPE: Load operation FILE TYPE: Packet file
OPERATION STAGE: Saving file
PROCESS: 0%
OPERATION TYPE: Load operation FILE TYPE: Packet file
OPERATION STAGE: Saving file
PROCESS: 0%
OPERATION TYPE: Load operation FILE TYPE: Packet file
OPERATION STAGE: Saving file
PROCESS: 0%
OPERATION TYPE: Load operation FILE TYPE: Packet file
OPERATION STAGE: Saving file
PROCESS: 0%
write the main config area...!
write the slave config area...!
OPERATION TYPE: Load operation
FILE TYPE: Packet file
OPERATION STAGE: Saving file
PROCESS: 0%
init config area success!
OPERATION TYPE: Load operation
FILE TYPE: Packet file
OPERATION STAGE: Saving file
PROCESS: 0%
OPERATION TYPE: Load operation
FILE TYPE: Packet file
OPERATION STAGE: Saving file
PROCESS: 0%
-----------------------------------------------------
NOTICE:Only reboot system,new program can take effect!
-----------------------------------------------------
OPERATION TYPE: Load operation
FILE TYPE: Packet file
OPERATION STAGE: Saving file
PROCESS: 99%
OPERATION TYPE: Load operation
FILE TYPE: Packet file
OPERATION RESULT: Operation completed.
FAILURE REASON: Vacancy
IAD2000(config)#reboot
Are you sure to reset system? [Y|N]:y
IAD2000(config)#
System serial port initialed successfully.
Press 't' to run SDRAM test:
Start to decode bootrom............................................... done
BIOS VERSION : 1036
CREATION DATE: May 30 2013, 23:24:34
Please press CTRL+B to enter bootmenu,other key to boot! remain 0s
Rebuild from the main config area!
write the main config area...!
write the slave config area...!
init config area success!
Check program file..................... done.
Expand program....................................................................... .............................................................................. .............................................................................. .............................................................................. .............................................................................. .............................................................................. ..................... done.
Expand local ml resource........ done.
Expand dsp loader... done.
Expand dsp firmware........... done.
Starting at 0x10000...
Attaching interface lo0... done
Attached IPv4 interface to fei unit 0
usrNetBootConfig: Failed addGateway
Rebuild from the main config area!
init config area success!Fail:../all/FlashApp.c,1191
Fail:../all/FlashApp.c,1217
main config area2 is bad!
format the config area2!
write the main config area...!
init config area2 success!
Root task begin...
VOS_OK!The real size of sysPhysMemMap is 14.
No Reboot info to Show!
No record found in the Exception region(Region id:11).
TermSoft_Config Initial succeed!
Press CTRL+R to restore vendor-config 0s done.
General Language has restored from flash.
Start Initialize SPI.
SPI module initialized OK.
Start load config................
EXEC File Restore Failure,Cmd = console 0.0.0.0 ................done
Huawei TERMINAL Multi-service Distribution Module.
Copyright(C) 1998-2011 by Huawei Technologies Co., Ltd.
User name:root
User password:
IAD2000>enable
IAD2000#con
! FAULT MAJOR 2005-01-01 00:00:35 ALARM NAME :MGCP user interface failed
PARAMETERS :Lost connection with MGC
IAD2000#co
! FAULT WARNING 2005-01-01 00:00:35 ALARM NAME :MGCP user fault in registration PARAMETERS :Unregistered to MGC: 10.26.102.13
IAD2000#cofigure terminal
IAD2000(config)#load logic tftp 192.168.1.55 Iad_cpld
IAD2000(config)#
! EVENT WARNING 2005-01-01 00:00:43 ALARM NAME :Online load start
PARAMETERS :Load content: logic
Download Stage: File transfer & Rate of process: 50%
Now upd
System serial port initialed successfully.
Press 't' to run SDRAM test:
Start to decode bootrom............................................... done
BIOS VERSION : 1036
CREATION DATE: May 30 2013, 23:24:34
Please press CTRL+B to enter bootmenu,other key to boot! remain 0s
Rebuild from the main config area!
write the main config area...!
write the slave config area...!
init config area success!
Check program file..................... done.
Expand program....................................................................... .............................................................................. .............................................................................. .............................................................................. .............................................................................. .............................................................................. ..................... done.
Expand local ml resource........ done.
Expand dsp loader... done.
Expand dsp firmware........... done.
Starting at 0x10000...
Attaching interface lo0... done
Attached IPv4 interface to fei unit 0
usrNetBootConfig: Failed addGateway
Rebuild from the main config area!
init config area success!
Rebuild from the main config area2!
init config area2 success!
Root task begin...
VOS_OK!The real size of sysPhysMemMap is 14.
No Reboot info to Show!
No record found in the Exception region(Region id:11).
TermSoft_Config Initial succeed!
Press CTRL+R to restore vendor-config 0s
General Language has restored from flash.
Start Initialize SPI.
SPI module initialized OK.
Start load config................
EXEC File Restore Failure,Cmd = console 0.0.0.0 ................done
Huawei TERMINAL Multi-service Distribution Module.
Copyright(C) 1998-2011 by Huawei Technologies Co., Ltd.
User name:。