VQIR

Name Department Name Date. Code
Sample size
Inspector Revision Date
No.Sub-No.
Equipment
used Failure class Remark/Te
st plan No.
Check frequency
Inspection records OK/NG
1.1Visual 目视N/A 2% of total shipment no less than 5 units 1.2Visual 目视N/A 2% of total shipment no less than 4 units 1.3
Visual 目视N/A
2% of total shipment no less than 5 units 2.1Visual 目视N/A 2% of total shipment no less than 5 units 2.2Visual 目视N/A 2% of total shipment no less than 4 units 2.3
Visual 目视N/A
2% of total shipment no less than 5 units 3.1
Visual 目视
N/A
2% of total shipment no less than 5 units
3.4
Visual 目视
N/A
2% of total shipment no less than 5 units
3.5Visual
目视N/A 2% of total shipment no less than 5 units 3.6
Visual 目视N/A
2% of total shipment no less than 5 units 4
4.1Visual 目视N/A 2% of total shipment no less than 5 units 4.2Visual 目视N/A 2% of total shipment no less than 5 units 4.3Visual 目视N/A 2% of total shipment no less than 5 units 4.4Visual 目视N/A 2% of total shipment no less than 5 units 4.5Visual 目视N/A 2% of total shipment no less than 5 units 4.6
Visual 目视
N/A
2% of total shipment no less than 5 units
检查产品的外箱不能出现外箱破损，字迹模糊等不良检查整机中附件和配件的功能.Inspection date.
3打开机器， LED 灯工作正常。

检查不同的亮度。

通过USB 连接线检查打印机和电脑的连接，要有连接成功的标记显示在软件中。

检查电机，风扇和整机的震动噪音与工厂样机对应。

机器在纸箱中开关必须处于关闭的状态Package inspection Test to be performed 按照使用说明书检查包装。

所有的包装物料需要符合包装BOM 检查产品的外箱的标签，条码等内容准确，字迹清晰
2所有材料摆放须根据当前的材料清单和包装指导, 操作说明书必须清晰可读。

检查包装填充材料是否皮损和失效
电源线和插头必须没有损伤，相应版本使用正确的型号. 试用电源线，电源线两头的插拔都要顺畅，机械和电气连接都良好。

试用电源线和USB 线，线两头的插拔都要顺畅，机械和电气连接都良好。

检查固件版本，批准的最新版本号以邮件为准。

Function Inspection 打印平台在Z 方向移动要求顺滑，上下移动打印平台来检查喷头在X 和Y 方向必须移动顺滑，用手各个方向移动打印头来检查。

根据标准样品目视检查产品的外观：a.各部件配合好，无裂缝。

b.各部件无尖角、毛刺、飞边和划伤。

c.各部件颜色与纹理要统一。

d.各零件装配无松脱，无漏件。

e.外观干净，无油脂。

Appearance inspection 1
Accessories /literature inspection Product No.
VQ inspection instruction & Report
Originator
Product Name
Approval
Department
Sign of Supplier:
Date:。