drw0001
MM5ZxxxST1G Serie Zener Voltage Regulators 500 mW
MM5ZxxxST1G Series, SZMM5ZxxxST1G Series Zener Voltage Regulators 500 mW SOD−523 Surface MountThis series of Zener diodes is packaged in a SOD−523 surface mount package. They are designed to provide voltage regulation protection and are especially attractive in situations where space is at a premium. They are well suited for applications such as cellular phones, hand held portables, and high density PC boards. Specification Features•Standard Zener Breakdown V oltage Range −2.4 V to 18 V •Steady State Power Rating of 500 mW•Small Body Outline Dimensions:0.047″ x 0.032″ (1.20 mm x 0.80 mm)•Low Body Height: 0.028″ (0.7 mm)•ESD Rating of Class 3 (> 16 kV) per Human Body Model •Tight Tolerance V Z•SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable•These Devices are Pb−Free and are RoHS Compliant*Mechanical CharacteristicsCASE:V oid-free, transfer-molded, thermosetting plasticEpoxy Meets UL 94, V−0LEAD FINISH: 100% Matte Sn (Tin)MOUNTING POSITION:AnyQUALIFIED MAX REFLOW TEMPERATURE: 260°CDevice Meets MSL 1 RequirementsMAXIMUM RATINGSRating Symbol Max UnitTotal Device Dissipation FR−4 Board, (Note 1) @ T A = 25°CDerate above 25°C P D5004.0mWmW/°CThermal Resistance from Junction−to−Ambient (Note 1)R q JA250°C/WJunction and Storage Temperature Range T J, T stg−65 to+150°CStresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.1.FR−4 printed circuit board, single−sided copper, mounting pad 1 cm2.*For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.Device Package Shipping†ORDERING INFORMATIONCathode AnodeSee specific marking information in the device marking column of the Electrical Characteristics table on page 2 of this data sheet.DEVICE MARKING INFORMATIONSOD−523CASE 502STYLE 1MARKING DIAGRAMXX= Specific Device CodeM Date Code*G= Pb−Free Package(Note: Microdot may be in either location)*Date Code orientation may vary dependingupon manufacturing location.MM5ZxxxST1G SOD−523(Pb−Free)3,000 /Tape & Reel†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our T ape and Reel Packaging Specifications Brochure, BRD8011/D.SOD−523(Pb−Free)SZMM5ZxxxST1G3,000 /Tape & ReelSOD−523(Pb−Free)SZMM5ZxxxST5G8,000 /Tape & ReelELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted,V F = 0.9 V Max. @ I F = 10 mA for all types) Symbol Parameter V Z Reverse Zener Voltage @ I ZTI ZT Reverse CurrentZZT Maximum Zener Impedance @ I ZTI ZK Reverse CurrentZ ZK Maximum Zener Impedance @ I ZKI R Reverse Leakage Current @ V RV R Reverse VoltageI F Forward CurrentV F Forward Voltage @ I FQ V Z Maximum Temperature Coefficient of V Z C Max. Capacitance @V R = 0 and f = 1 MHzV Figure 1. Zener Voltage RegulatorELECTRICAL CHARACTERISTICS (V F = 0.9 Max @ I F = 10 mA for all types)Device*DeviceMarkingTestCurrentIzt mAZener VoltageVZZ ZK I Z= 1.0mA WMaxZ ZTI Z = IZT@ 10%Mod WMaxMaxIR @ VRd VZ/dt (mV/k)@ I ZT1 = 5 mA C pF Max @V R = 0f = 1 MHzMin Max m A V Min MaxMM5Z2V4ST1G T2 5.0 2.43 2.631000100120 1.0−3.50450MM5Z2V7ST1G T3 5.0 2.67 2.911000100100 1.0−3.50450MM5Z3V3ST1G T5 5.0 3.32 3.53100095 5.0 1.0−3.50450MM5Z3V6ST1G T6 5.0 3.60 3.85100090 5.0 1.0−3.50450MM5Z3V9ST1G T7 5.0 3.89 4.16100090 3.0 1.0−3.5−2.5450MM5Z4V3ST1G T8 5.0 4.17 4.43100090 3.0 1.0−3.50450MM5Z4V7ST1G/T5G T9 5.0 4.55 4.7580080 3.0 2.0−3.50.2260MM5Z5V1ST1G TA 5.0 4.98 5.250060 2.0 2.0−2.7 1.2225MM5Z5V6ST1G TC 5.0 5.49 5.7320040 1.0 2.0−2.0 2.5200MM5Z6V2ST1G TE 5.0 6.06 6.3310010 3.0 4.00.4 3.7185MM5Z6V8ST1G TF 5.0 6.65 6.9316015 2.0 4.0 1.2 4.5155MM5Z7V5ST1G TG 5.07.287.616015 1.0 5.0 2.5 5.3140MM5Z8V2ST1G TH 5.08.028.36160150.7 5.0 3.2 6.2135MM5Z9V1ST1G TK 5.08.859.23160150.5 6.0 3.87.0130MM5Z12VST1G TN 5.011.7412.2480250.18.0 6.010130MM5Z16VST1G TU 5.015.8516.5180400.0511.210.414105MM5Z18VST1G TW 5.017.5618.3580450.0512.612.416100 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.*Include SZ-prefix devices where applicable.TYPICAL CHARACTERISTICSTEMPERATURE (°C)25010040200P O W E R D I S S I P A T I O N (%)50751001251508060Figure 2. Steady State Power DeratingPACKAGE DIMENSIONSSOD −523CASE 502ISSUE ENOTES:1.DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.2.CONTROLLING DIMENSION: MILLIMETERS.3.MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH.MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL.4.DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PRO-TRUSIONS, OR GATE BURRS.DIM MIN NOM MAX MILLIMETERS D 1.10 1.20 1.30E 0.700.800.90A 0.500.600.70b 0.250.300.35c 0.070.140.20L 0.30 REF H 1.50 1.60 1.70*For additional information on our Pb −Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT*E RECOMMENDEDSIDE VIEW2XBOTTOM VIEWL2L2X2XL20.150.200.25STYLE 1:PIN 1.CATHODE (POLARITY BAND)2.ANODEON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.PUBLICATION ORDERING INFORMATION。
DVD刻录盘环码(MID)识别
16X
UME01
UmeDisc(香港)
8X
UTJG01001
Unitec Japan
1X
UTJR001001
Unitec Japan
?X
VANGUARD
精鋒
4X
VANGUARD01
精鋒
8X
VDSPMSAB 01
Interaxia AG(瑞士)
4X
VIVASTAR
VIVASTAR
錸德
2X
RITEKW04
錸德
4X
RITEKW06
錸德
6X
SONY000000U9
SONY
1X
TDK401saku=3
TDK
1X
TDK501saku]3
TDK
1X
TDK502sakuM3
TDK
2X
TDK601saku
TDK
4X
DVD+R
AML 001
UmeDisc(香港)
4X
AML 002
UmeDisc(香港)
16X
CMC MAG.E01
中環
8X
CMC MAG.F01
中環
4X
CMC MAG.M01
中環
16X
CMC MAG.R01
中環
2.4X
DATATRAK001
Euro Digital Disc Manufacturing GmbH
2.4X
DT-D02 02
Euro Digital Disc Manufacturing GmbH
訊碟
4X
INFODISC R20
訊碟
?X
SFU安装
Unix和Windows共存的异构环境下互访的又一方便方法在现今的企业环境中，既存在广泛在办公环境中使用的Windows系列，还存在工业环境中广泛使用的Hp-ux,SCO,Solaries,AIX等,还有数不清的Linux分发版，在这样一个复杂的异构环境中实现无缝的互连互访，肯定伤透不少人的脑筋，Windows用户通过网络邻居实现互访是很简单的事，但在不同的操作平台实现互访却不太容易，当然不是没有办法，Samba就是一款优秀的提供Unix与Windows之间互连互通的工具，但用户需要许多Unix系统下的系统管理经验，所以今天的主角却不是它。
我的工作环境面对的困境：不同的产品生产线中有不同类型的Unix，运行着不同的测试程序，测试日志要提交给数据服务器，而数据服务器却是Windows系统(2000/2003)，最初Unix上装有Samba，每次服务器上的程序通过Samba访问Unix上的文件时，总是有找不到路径的错误，映射成本地盘或者UNC路径也好，都有同样的问题. 也许是对方的系统管理人员的配置的问题吧，但我们无法改变对方，所以求人不如求已，了解到几乎所有类Unix平台都有NFS(Network file system),这是一个Unix共享网络文件和程序的方法，所以能有一个在Windows提供一个NFS服务器的东东多好，这里就介绍一款跨平台通讯的工具集SFU.SFU，全称是Services For Unix，是M$是一个挖Unix墙角的工具，有需要的可以从M$的官方网站下载到，也可从文章最后的连接快速导航到下载地址，不过，要成功下载，必需要有一个微软的Passport认证，如果你有MSN或者Hot m ail那是再好不过的事了，要不你不得不注册一个。
下面先来了解下SFU是什么东东(官方文摘--Start--)Microsoft® Windows® Services for UNIX (SFU) 3.5允许Windows和UNIX的计算机之间共享数据、安全信任。
第2章 Proe操作基础
2.2.4 保存和备份
1.
保存文件
两种方式： （1）以当前名称、路径保存
单击【文件】→【保存】或用鼠标左键单击上工具箱中的 注意：Pro/E在保存文件时不同于其他一般的软件，系统每执行一次 按钮，即可保存图形文件。 存储操作并不是简单地用新文件覆盖原来的旧文件，而是在保留文 （2）以其他的名称、路径保存 件前期版本的基础上新增一个版本文件。在同一设计过程中多次存 Pro/E系统不允许设计者在执行文件存储时改变目录位置和文件 储的文件将在文件名的后缀（扩展名）添加序号以示区别，序号数 名称，如果确实要改变文件的存储位置和文件名称，那么就需要使 字越大，文件版本越新。 用【保存副本】功能。 例如，一个文件在设计过程中进行了3次保存，那么文件分别为 用于保存当前活动对象的副本，名称（即“新建名称”）不能与 prt0001.prt.1、prt0001.prt.2和prt0001.prt.3。 已保存的文件名称相同。保存的目录没有限制，可以为当前目录， 也可以是其他目录。
操控板
状态栏
新建或打开一个零件模型文件，将显示零件 模式的工作界面 。
4
在导航区显 示了零件的 特征模型树
单击此处并左右 拖动可调整导航 区与工作区大小
工作区中 显示零件 模型
特征操控面板 单击此处可扩大工 作区，隐藏导航区 在操控板中 显示的消息 “草绘”过滤器
2.1.1 菜单栏
文件：该菜单提供了一组文件操作命令，如新建、打开、保存、删除
2.2.5 拭除和删除
2. 删除文件：将文件从磁盘上彻底删除
【文件】→【删除】：两个选项
【旧版本】：系统将保留该软件的最新版本，删除 其他旧版本；
【所有版本】：，系统将彻底删除该软件的所有版
派克液压密封件说明书
派克汉尼汾公司版权所有未经许可不能摘录，翻印。
保留修改权利2021年6月警告销售条件本样本中产品和/或系统或相关产品出现故障，选型不当或使用不当，均可能导致人身伤亡和财产损失。
本文档以及由派克·汉尼汾公司及其子公司和授权经销商提供的其他资料，为具有技术知识的用户提供进一步研究所需的产品和/或系统选项。
重要的是，用户必须对您的应用进行全面的分析，并对当前产品样本中与产品或系统相关的资料进行评估。
由于工作条件以及产品或系统的多样性，用户必须自行分析和测试，并独自承担一切后果，包括:产品和系统的最终选型以及确保满足应用的所有性能、安全和警告等方面的要求。
派克·汉尼汾及其子公司可能会随时对本样本中的产品，包括但不限于:产品的特性、产品的规格、产品的结构、产品的有效性以及产品的价格作出变更而不另行通知.本样本中的所有产品均由派克·汉尼汾公司及其子公司和援权经销商销售。
与派克签订的任何销售合同均按照派克标准条件和销售条件中规定的条款执行(提供复印件备索)。
本公司的密封件，只能在本公司的文件资料述及的应用参数范围与接触介质、压力、温度和存放时间相一致的情况下才能使用。
在规定的应用参数范围外使用以及错误选用不同的材料都可能导致密封件寿命的缩短以及设备的损坏，甚至更严重的后果(如生命安全，环境污染等)。
样本中所列出的工作压力、温度范围、运动速度是极限值，它们之间相互关联、相互影响；在极端的工况下，建议不要同时把各个参数都同时用到极限值。
对于特殊的要求（压力、温度、速度、介质等），请联系派克汉尼汾公司以咨询合适的密封结构、材料、配置、安装建议等。
由于诸多工作参数会影响到流体传动系统及密封元件，这些设备的制造商必须在实际工作条件下测试、验证并批准密封系统的功能与可靠性。
此外，对于不断出现的新的介质（液压油、润滑脂、清洗剂等)，用户特别注意它们与目前所用的密封件弹性体材料的兼容性。
我们建议用户在大批量应用之前，在厂内或现场先做密封材料的兼容性能测试，作为密封产品与系统供应商，我们建议用户遵循我们的这些建议。
ProE教程-最新
录
Pro/E 实 训 教 材
目
录
Pro/E 实 训 教 材
第三章 曲面特征的建立 实例一 盖板 实例二 勺子 实例三 鼠标上盖 习 题 第四章 零件设计修改 实例一 修改零件的尺寸或草图 实例二 修改零件特征 实例三 添加零件特征 实例四 调整零件特征顺序 第五章 装配体的建立 实例一 建立阀体的装配图 实例二 建立阀体装配体的分解状态图 第六章 零件工程图建立 实例一 创建工程图格式 实例二 建立支架零件工程图 实例二 建立轴零件的工程图 实例三 建立阀体零件的工程图 习题 第七章 型腔模模型零件的设计 实例一 设计手机上盖的模具模型零件 实例二 设计手柄零件的模具模型零件 实例三 设计咖啡杯模具模型零件 习 题 第八章 数控加工基础 实例一 手机模型零件的数控加工 8.1 数控接口
内容简介
Pro/E软件以其智能化的建模方式，使您在产品开发、产品设计中得心 应手。它实用性强、比较容易掌握，是目前国内外最流行的3D工程设计软 件之一。 Pro/E 软件主要包括以下功能：生成零件3D图，再由零件3D图 生成3D装配图、2D工程图、3D模具图及其数控加工程序。Pro/E 软件所 具有的参数化设计功能，极其方便产品设计及图纸的修改，当我们对其中 一张图纸进行修改后，与此相关的其它图纸及参数也随之发生相应变化。 Pro/E 野火版软件造型方法简单、灵活，并能与Solidworks、UG、 MasterCAM 及AutoCAD等软件接口。 本实训教材共分为九内容： 1 应用基础 应用基础：介绍Pro/E 软件的发展、 Pro/E 野火版软件的基本操作， 草图的绘制技巧。让学生了解和掌握Pro/E野火版软件的草图绘制技巧和方 法。 3 实体特征的建立 实体特征的建立：在Pro/E 野火版软件中以图形范例的方式，逐步引 导学 生熟悉并掌握各种零件实体特征的建立方法。 4 曲面特征的建立 曲面特征的建立：在Pro/E 野火版软件中以图形范例的方式，逐步引 导学 生熟悉并掌握初级零件曲面特征的建立方法。
ProE Wildfire5.0导出AutoCAD 1比1工程图
Pro/ENGINEER Wildfire5.0导出AutoCAD 1比1工程图Pro/E Wildfire5.0导出AutoCAD 1比1工程图（.dwg或.dwf）需先配置以下三个关键参数：（1） 模型属性单位选择mmns;文件‐‐>属性‐‐>模型属性‐‐>单位（毫米牛顿秒mmns）（2）配置模板文件○1工具‐‐>选项‐‐>config选项‐‐>dxf_out_drawing_scale‐‐>yes○2工具‐‐>选项‐‐>config选项‐‐>dxf_out_scale_views‐‐>yes下面截图对以上三关键参数详细操作进行说明：1)模型属性单位选择2)配置模板文件2.1模板文件如未配置以下红框的两个参数，按左下角橙色“查看”按钮进行添加。
2.2在“查找选项”里的“输入关键字”输入dxf_out_drawing_scale并在“设置值”项选yes,最后确认“添加/更改”按钮。
添加dxf_out_scale_views重复上述操作。
至此ProE Wildfire5.0导出AutoCAD 1比1工程图的三个关键参数项配置完毕。
3)以下操作是示范例程Setp1: 文件‐‐>新建‐‐>选择“绘图”项，其他保持默认，（“名称”里的“drw0001”可按需要改名，也可保持默认）如下图所示，点击“确定”。
Setp2:如无特别需求，此步骤选项也可全部默认，不用更改，点击“确定”。
Setp3:完成以上两步确定后，进入绘图界面，如下图所示进入绘图界面后，工程图可能是1：1，也可能是其他的比例（如上图所示就不是1：1的），若是其他比例就需双击左下角的比例然后在弹出的对话框“输入比例的值”，然后按青色的“对号”确认，就得到1：1的图纸了。
调整为1：1后的图纸如下图所示（PS：调整为1：1后，三视图的三部分的图有可能会重合，这时需要对任一视图右击[保持2秒]然后然后将“锁定视图移动”前面的勾去掉，之后就可自由调整三视图为你满意的相对位置了）Step4:双击任意一视图出现如下对话框，按需求设置各项参数。
DVDR碟片制造商判别码
RITEKG01 莱德 1X
RITEKG02 莱德 2X
RITEKG03 莱德 1X
RITEKG04 莱德 4X
RITEKG05 莱德 8X
RITEKM02 莱德 4X
FORNEX4X002 宏碟 4X
FUJIFILM02 Fuji Film 4X
FUJIFILM03 Fuji Film 8X
GSC001 国硕 4X
GSC002 国硕 4X
GSC003 国硕 8X
INFOSMART01 Info Smart Technology(香港) 4X
IS-F ? 4X
LD 利碟 1X
LD01 利碟 1X
Lead Data 利碟 1X
LEADDATA01 利碟 4X
LGE LG Electronics 1X
MXL RG01 Hitachi Maxell, LTD 2X
MXL RG02 Hitachi Maxell, LTD 4X
MXL RG03 Hitachi Maxell, LTD 8X
NANYA P1861 南亞 1X
NANYA-JC001 南亞 4X
BeAll G40001 Samsung??? 4X
CMC00RG200 中环 1X
CMC00RG300 中环 1X
CMC MAG 中环 2X
CMC MAG. AE1 中环 8X
CMC MAG. AF1 中环 4X
CMC MAG. CO. 中环 1X
VANGUARD 精鋒 4X
VANGUARD01 精鋒 8X
VDSPMSAB 01 華麗金 4X
Dxdesigner&PADS9.5使用笔记
第1章 使用笔记1.1 同步为了同步dxdesigner 与pads 之间的信息，比如在dx 中更改了symbol 的pkg_type ，要同步到pads 上，开始的时候无法同步。
后来，为每个symbol 添加device 属性，并使device 属性和pkg_type 、part_type 都保持一致，这样就可以很方便地同步更改了。
1.2 选择使用scomp 可以方便地选择同类型的元件，比如同页内电阻全选：1.3 Device 冲突今天在添加了MMBD4148CC ，一个SOT23封装的2 IN 1二极管，之后原理图分配位号时，报冲突了。
原因是MMBD4148CC 的DEVICE 属性设置为SOT23了，然后之前BC857也是SOT23封装，我将它的DEVICE 属性也设置为SOT23了。
所以报冲突了，就是不同symbol 不能使用相同的DEVICE 属性。
后来，将BC857的DEVICE 改为BC857，把MMBD4148CC 的DEVICE 改为MMBD4148CC ，就好了。
结论：因此，同一symbol 要设置不同封装，可以将DEVICE 设置为不同，然后这个DEVICE 会对应到PADS LAYOUT 中的PART TYPE ，然后不同的PART TYPE 就可以任意的指定相同、或不相同的DECAL （封装）。
1.4 最小显示线宽使用R 命令加最小显示线宽值a) 命令R0.3 b) 命令R01.5功能●添加走线：F3●放置过孔：shift+左击●停止走线：ctrl+L+左击1.6封装向导在decal edit模式下，点如图按键1.7关于封装0201电阻：0201电容：与0201电阻共用封装号0201 _CAP_MK2.2uf电容最小只有0402封装：使用0402_CAP_MK_S10uf电容最小只有0402封装：使用0402_CAP_MK_L BLM15HG102SN1D使用与2.2uf电容共用封装号0402_CAP_S1.8飞线显示设置其中connection设为黑色，则不显示飞线；设为灰色，则打开显示。
中级认证试题
Pro/ENGINEER 软件技能认证试题(中级中级))D 卷注意事项1．请考生在试卷的标封处填写您的身份证号和姓名2．上机做题前须先在本机的硬盘D 上以试卷编号为名建立自己文件夹并注意随时保存文件3．竞赛结束前须在指定地址备份所有上机结果4．考试时间为210分钟一．填空题（本题满分5分）1.“拉伸”选项-创建-创建曲面。
-相对于草绘平面相反方向。
用于创建切口的选项-使用拉伸体积块创建。
-创建切口时改变。
2.草绘平面符合什么要求：________，与参照平面的关系：_______。
拉伸实体截面符合什么要求：_______，混合实体时截面之间__________。
3.控制区操控板的控制区包含下列元素：的意义是，的意义是，的意义是。
4．设置工作目录的作用能____能更好的管理文件___，特征目录树的作用___能时时观察创建的特征________。
二.根据给出的立体图，利用Pro/E 软件进行造型，得到三维模型。
（本题满分25分）要求：（1）合理安排造型顺序,做到尺寸准确，外形圆滑；（2）根据生成的三维模型，再生成二维工程图（第一视角，不标注尺寸）题号一二三四五总分审核人分数得分评分人得分评分人软件版本号Pro/ENGINGEERWIDEFIRE2.0M110三．按照下列提示，进行游戏手饼的开发。
（本题满分35分）要求：（1）外形要求：简洁耐用，美观大方。
（2）结构：方向，开关，暂停按键各一个，六个功能键。
（3）拆装方便，结构合理。
（4）根据使用的实际需要，能够实现大批量生产。
（5）在开发过程中应采用装配功能，下图为外形简图，严禁雷同。
（6）保存所有的三维模型和渲染图片。
四．根据提供的Pro/E 原文件进行装配，（本题满分25分）源文件：（D:\认证文件\中级认证—学生—06_01_12_02\装配）装配图五根据下列提供的源文件，进行模具行腔的分型（本题满分10分）源文件：（D:\认证文件\中级认证—学生—06_01_12_02\模具分型）参考1参考2参考3一1，Pro/ENGINEER 软件技能认证试题(中级中级))C 卷软件版本号Pro/ENGINGEERWIDEFIRE2.0M11得分评分人软件版本号Pro/ENGINGEER WIDEFIRE2.0M110得分评分人软件版本号Pro/ENGINGEER WIDEFIRE2.0M110注意事项2．请考生在试卷的标封处填写您的身份证号和姓名2．上机做题前须先在本机的硬盘D 上把试卷编号改为自己姓名，并注意保存文件3．竞赛结束前须在指定地址备份所有上机结果4．考试时间为210分钟一．填空题（本题满分5分）4.“拉伸”选项创建、创建、创建、定义高度到。
基士得耶故障代码
E01 蜡版切纸部分故障驱动部分故障，无电源E02 送纸台驱动故障送纸驱动故障，无电源E03 存储器程序故障记忆板控制印刷电路板E04 热敏头或电源组件热敏头损坏、热敏电阻、电源E05 图象位移部分故障编码连接器，编码器E06 机器闭锁时钟脉冲发生器，主电机E07 编程出现故障〈ROM〉只读存储器〈ROM〉板E08 热敏头脉冲信号不正常图象处理电路板，电源板进入维修模式再打开电源同时按下印刷、停止、清零键和废版检测开关，按记忆键选择输入/输出模式1=输入 0=输出，用数字键输入代码，按印刷键开始检测输出检测0001 接通滚筒 10转/分 0002 接通滚筒30转/分0003 接通滚筒 75转/分 0004 接通纸台上升0005 接通纸台下降 0006 抽真空马达0007 卸蜡纸离合器 0008 卸蜡纸夹持器离合器0009 版纸进给夹持器离合器 0010 反向辊离合器0011 进纸及压力辊离合器 0012 油墨供给离合器0013 原稿传送马达 0014 蜡纸传送马达0015 荧光灯管 0016 制版纸程序指令照片，模式指示灯亮0017蜡版卸出马达反转带动排除辊上/下0018 蜡版卸出马达压力板0019 切纸马达从左到右 0020 切纸马达从右到左0021 成像马达+方向 0022 成像马达-方向0023 印刷计数器 0024 制版计数器0025 滚筒反转继电器 0026 放大率100%发光二极管0027 放大率93%发光二极管 0028 放大率82%发光二极管0029 放大率71%发光二极管 0030 滚筒10转/分0032 ADF驱动马达 0033 原稿压力线圈0034 滚筒琐扣线圈 0035 输出热敏回答人的补充 ??2009-09-30 12:29基士得耶5200复合机维修代码进入输入/输出检查方式1进入SP方式2用数字键输入130《输入检查方式》，131《输出检查方式》3按下输入键《#》4输入所需数字《见输入输出检查方式表》按选择尺寸和方向键，数值可以增减5按下输入键《#》在输入检查方式中，当一只正在测试的传感器或开关被驱动时，全部的印刷速度灯点亮，同时听到蜂鸣声6在输出检查方式中按下启动键，使电器部件接通7按下输入《#》键。
海参低聚肽粉
Q/DRW 大连润伟海参研发科技有限公司企业标准0001S－2020201515Q/DRW0001S－海参低聚肽粉2015-11-08发布2015-12-08实施大连润伟海参研发科技有限公司发布Q/DRW0001S-2015前言本标准根据GB/T1.1-2009给出的规则起草。
本标准食品安全指标依据GB2762-2012《食品安全国家标准食品中污染物限量》确定，微生物指标依据GB10144-2005《动物性水产干制品卫生标准》、GB29921-2013《食品安全国家标准食品中致病菌限量》确定。
本标准由大连润伟海参研发科技有限公司提出并起草。
本标准主要起草人：包卫洋黄祥贤王祖哲侯英雪马普。
本标准属首次发布。
Q/DRW0001S-2015海参低聚肽粉1范围本标准规定了海参低聚肽粉的定义、分类、要求、试验方法、检验规则、标志、标签、包装、运输、贮存。
本标准适用于以刺参体壁、刺参肠及刺参煮液为原料，经复合蛋白酶酶解、小分子量肽的分离、精制、灭菌、干燥、包装等工艺加工制成的海参低聚肽粉。
2规范性引用文件下列文件对于本文件的应用是必不可少的。
凡是注日期的引用文件，仅所注日期的版本适用于本文件。
凡是不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。
GB/T191包装储运图示标志GB2733鲜、冻动物性水产品卫生标准GB2760食品安全国家标准食品添加剂使用标准GB2762食品安全国家标准食品中污染物限量GB4789.2食品安全国家标准食品微生物学检验菌落总数测定GB/T4789.3-2003食品卫生微生物学检验大肠菌群测定GB4789.4食品安全国家标准食品微生物学检验沙门氏菌检验GB4789.5食品安全国家标准食品微生物学检验志贺氏菌检验GB4789.10食品安全国家标准食品微生物学检验金黄色葡萄球菌检验GB4789.15食品安全国家标准食品微生物学检验霉菌和酵母计数GB5009.3食品安全国家标准食品中水分的测定GB5009.4食品安全国家标准食品中灰分的测定GB5009.5食品安全国家标准食品中蛋白质的测定GB/T5009.11食品中总砷及无机砷的测定GB5009.12食品安全国家标准食品中铅的测定GB5009.15食品安全国家标准食品中镉的测定GB/T5009.17食品中总汞及有机汞的测定GB/T5009.26食品中N-亚硝胺类的测定GB5009.123食品安全国家标准食品中铬的测定GB5009.190食品安全国家标准食品中指示性多氯联苯含量的测定GB5749生活饮用水卫生标准GB7718食品安全国家标准预包装食品标签通则GB/T9695.23肉与肉制品羟脯氨酸含量测定GB/T10004包装用塑料复合膜、袋干法复合、挤出复合Q/DRW0001S-2015GB14881食品安全国家标准食品生产通用卫生规范GB/T20881低聚异麦芽糖GB/T22492大豆肽粉GB/T22729海洋鱼低聚肽粉GB/T23527蛋白酶制剂GB28050食品安全国家标准预包装食品营养标签通则JJF1070定量包装商品净含量计算检验规则国家质量监督检验检疫总局令第75号（2005）《定量包装商品计量监督管理办法》国家质量监督检验检疫总局令（2009）第123号《食品标识管理规定》3定义海参低聚肽oligopetides of sea cucumber以海参及副产物海参肠、海参煮液为原料，经复合蛋白酶酶解、小分子肽的分离、干燥、灭菌等工艺加工成的相对分子质量低于1000道尔顿的低聚肽为主要成分的产品，其中95%以上的分子量小于1000道尔顿，长度在十几个纳米，也称为海参纳米肽。
机械产品图号编码设计方法与原则
在左数第1-8位为添加合同号的位置； 第9-13位为添加项目编号的位置； 在第14-22位为添加具体图号的位置，其中14位为专业类别，15位为产品类别，第16-18位为产品系列号，第19-22为顺序编码。在图纸编号中使用阿拉伯数字和英文字母共同编写。在此字段中企业内部所有图纸全部遵循这一原则。同样在图纸编号时采用无隶属关系的编码原则。在此编码原则中按图纸编号存放图纸档案，具体设计时合同号和项目号可后添加，并且在CAD设计中，图纸中的合同号和项目号框内的号码可以在设计较规范时设计一种程序在短时间内进行大量图纸修改，使之适用于该合同该项目使用。 合同号和项目号可以允许极少的重码，但图号不允许有重码存在。
方案六：在前述几种方案中图纸编号字段内增加一项用于描述图纸幅面特征和一项描述某个产品图纸总顺序号的字段 例如：A ----- A0号图纸 B ----- A1号图纸 C ----- A2号图纸 D ----- A3号图纸 E ----- A4号图纸 增加一项用于描述图纸幅面特征的代码的目的是便于管理不同幅面图纸。 增加描述某个产品图纸总顺序号的字段方式如下：
5、 兼顾已有代码的格式便于考虑管理与习惯；
6、 可延续性和拓展性，为下一级信息管理创造条件；
7、用两张以上数量图纸描述同一零件或部件时采用同一图号；
8、图号编制的具体位数与企业产品的构成、产品种类数量、企业的发展等因素有关。一般来讲在满足在较长时间内不改变编码原则为前提，应当可延续30-50年，在此条件下尽可能地减少总位数。
3、大分类号，按照某种功能或类型属性划分（可编入零件或部件的某一属性或特征）；
4、小分类号，按照某种功能或类型属性划分（可编入零件或部件的某一属性或特征）；
Delta HMC系列HMI产品说明书
5012618102-H8022012-11-19HMC08 High Color Wide Screen‧‧User-Friendly HMI ProductsInstrunction Sheet(1)PrefaceThank you for purchasing DELTA’s HMC series. This instruction sheet will be helpful in the installation, wiring and inspection of Delta HMI. Before using the product, please read this instruction sheet to ensure correct use. You should thoroughly understand all safety precautions before proceeding with the installation, wiring and operation. Place this instruction sheet in a safe location for future reference. Please observe the following precautions:⏹Install the product in a clean and dry location free from corrosive and inflammable gases or liquids.⏹Ensure that all wiring instructions and recommendations are followed.⏹Ensure that HMI is correctly connected to a ground. The grounding method must comply with the electricalstandard of the country (Please refer to NFPA 70: National Electrical Code, 2005 Ed.).⏹Do not disassemble HMI, modify or remove wiring when power is applied to HMI.⏹Do not touch the power supply during operation. Otherwise, it may cause electric shock.If you have any questions during operation, please contact our local distributors or Delta sales representatives.The content of this instruction sheet may be revised without prior notice. Please consult our distributors or download the most updated version at /ia.(2)Safety PrecautionsCarefully note and observe the following safety precautions when receiving, inspecting, installing, operating, maintaining and troubleshooting. The following words, DANGER, WARNING and STOP are used to mark safety precautions when(3)Model ExplanationHMC 08 - N 5 00 S 5 2(1) (2) (3)(4)(5) (6)(7)(8)(1) Product Name HMC: HMI with Controller(2) LCM Size 08: 8 inch TFT LCD(3) Type of Industries N: General Purpose(4) Display specification 5: SVGA(5) Version(6) Type of Model S: Standard ( built-in)(7) External Control Interface (Bus) 5: DMCNET(8) Controller Remote Unit interface 2: Specialized High-speed RS-422(4)Parts NamesHMC08-N500S52（Front View）A Power LED Indicator（）Lights in green when HMI works normally.BOperation LED Indicator（）／Alarm LED Indicator（）Lights in blue: the communication is carried out /the data isaccessing. (Please refer to the “Note” below for explanation).Lights in red: one of the alarms is on.C Touch Screen / DisplayNote: The definition of the operation LED indicator (Blue) can be determined by the users freely.HMC08-N500S52（Rear View）A Power Input Terminal G USB HostBCOM3 (It is provided with two LEDindicators to indicate that HMI is inRead or Write status during thecommunication process.)H Audio Output InterfaceCCOM2 (It is provided with two LEDindicators to indicate that HMI is inRead or Write status during thecommunication process.)IMemory Card Slot / BatteryCoverD COM1 J DMCNETE USB Slave K Remote Module InterfaceF Ethernet Interface（LAN）(5)Installation and Storage ConditionsThe product should be kept in the shipping carton before installation. In order to retain the warranty coverage, the HMIshould be stored properly when it is not to be used for an extended period of time. Some storage suggestions are:⏹Store in a clean and dry location free from direct sunlight.⏹Store within an ambient temperature range of -20°C to +60°C (-4°F to 140°F).⏹Store within a relative humidity range of 10% to 90% and non-condensing.⏹Do not store the HMI in a place subjected to corrosive gases and liquids.⏹Correctly packaged and placed on a solid and durable surface.⏹Do not mount the HMI adjacent to heat-radiating elements or in direct sunlight.⏹Do not mount the HMI in a location subjected to corrosive gases, liquids, or airborne dust or metallic particles.⏹Do not mount the HMI in a location where temperatures and humidity will exceed specification.⏹Do not mount the HMI in a location where vibration and shock will exceed specification.⏹Do not mount the HMI in a location where it will be subjected to high levels of electromagnetic radiation.(6)Installation and WiringInstallation Notes:⏹Improper installation will result in malfunction and greatly reduce the life of the HMI. Be sure to follow theguidelines in this quick start when installing the HMI.⏹In order to ensure the HMI being well ventilated, make sure that the ventilation holes are not obstructed andmust provide sufficient free space around HMI.⏹To ensure the panel is well protected, be sure to install a waterproof gasket into HMI.⏹For use on a flat surface of a Type 4X "Indoor Use Only" enclosure or equivalent.⏹The allowable thickness of the panel for mounting should be less than 5 mm.Installation Method:Step 1:Ensure to put waterproof gasket into HMI and theninsert the HMI into the panel cutout.Step 2:Ensure to insert fasteners into the HMI’sinsertion slots and turn the screw till screwstouch panel cutout.Step 3:Turn the screw with less than torque 0.7N.M toavoid damage to plastic box.Torque: 6.17lb-inch (0.7N-M)Step 4:Keep at least 60mm distance from rear of HMIproduct to the wall, installation surface or theother controllers for heat dissipation.Recommended wiring is in the table below:Type Wire Gauge (AWG) Stripped length TorqueSolid 28 ~ 12 7 ~ 8 mm 5 kg-cm（4.3 lb-in）Stranded 30 ~ 12 7 ~ 8 mm 5 kg-cm（4.3 lb-in）Be sure to perform wiring by referring to the following figure (power supply connector).BA ECALL NOW 800-985-6929/Email:***********************Email:***********************(7)Basic InspectionGeneral Inspection ●Periodically inspect the screws of the connection between the HMI and device.Tighten screws as necessary as they may loosen due to vibration and varying temperatures.●Ensure that oil, water, metallic particles or any foreign objects do not fall insidethe HMI, control panel or ventilation slots and holes. As these will cause damage.●Ensure the correct installation and the control panel. It should be free fromairborne dust, harmful gases or liquids.Inspection before operation (power is notapplied) ●Ensure that all wiring terminals are correctly insulated.●Ensure that all wiring is correct or damage and or malfunction may result.●Visually check to ensure that there are not any unused screws, metal strips, anyconductive or inflammable materials inside HMI.●Ensure to lower electromagnetic interference when devices are influenced by it.●Ensure that the external applied voltage to HMI is correct and matched to thecontroller.Inspection before operation (power isapplied) ●Check if power LED lights.●Check if the communication among devices is normal.●Please contact our local distributors or Delta sales representative if there are anyabnormal conditions.(8)Pin Definition of Serial Communication COM1 Port（Supports Flow Control）COM Port PIN Contact RS-23212 RXD3 TXD45 GND67 RTS8 CTS9 Note: Blank = No Connection.COM2 Port（Supports Flow Control）COM Port PIN MODE1 MODE2 MODE3 RS-232 RS-422 RS-4851 TXD+ D+2 RXD3 TXD4 RXD+5 GND GND GND6 TXD- D-7 RTS8 CTS9 RXD- Note1: Blank = No Connection.Note2: When COM2 port is used for RS-232 flow control, i.e. RTS and CTS signals are used for flow control, COM3 port will become incapable of being used.Note3: When COM2 port is used for RS-422 flow control, please refer to the following COM3 Port signals table for pin assignments. The signals, RTS+, CTS+, RTS- and CTS- shown in brackets are the signals used for flow control.COM3 PortCOM Port PIN MODE1 MODE2 MODE3 RS-232 RS-422 RS-4851TXD+(RTS+)D+2 RXD3 TXD4 RXD+(CTS+)5 GND GND GND6 TXD-(RTS-) D-789 RXD-(CTS-)Note1: Blank = No Connection.Note2: When COM2 port is used for RS-422 flow control, please refer to the COM3 Port signals table above for pin assignments. The signals, RTS+, CTS+, RTS- and CTS- shown in brackets are the signals used for flow control.Ethernet Interface (LAN)Ethernet Interface (LAN) PIN Contact Ethernet1 TX+2 TX-3 RX+456 RX-78Note: Blank = No Connection. DMCNETEthernet Interface(LAN) PIN MODE1 D1+2 D1-3 D2+456 D2-78Note: Blank = No Connection.Remote ModuleEthernet Interface (LAN) PIN Contact1234 TX+5 TX-67 RX+8 RX-Note: Blank = No Connection.(9) DimensionsHMC08-N500S52(10) SpecificationsMODEL HMC08-N500S52LCD MODULE Display Type 8” TFT LCD (65536 colors)Resolution 800 x 600 pixelsBacklight LED Back Light(less than 20,000 hours half-life at 25o C) (Note 1)Display Size 162 x 121.5mmOperation System Delta Real Time OSMCUHMI 32-bit RISC Micro-controllerController 32-bit DSPNOR Flash ROMFlash ROM 128 MB(OS System: 30MB / Backup: 16MB / User Application:82MB)SDRAM 64MbytesBackup Memory(Bytes)16MbytesSoundEffectOutputBuzzer Multi-Tone Frequency (2K ~ 4K Hz) ／85dBAUX Stereo outputEthernet InterfaceIEEE 802.3, IEEE 802.3u10/100 Mbps auto-sensing（(has built-in isolated power circuit (Note 3)）Memory Card SD Card (supports SDHC)USB 1 USB Host (Note 2) Ver 1.1 / 1 USB Slave Ver 2.0SerialCOMPortCOM1 RS-232（supports hardware flow control）COM2RS-232／RS-422／RS-485（has built-in isolated power circuit (Note 3)）COM3RS-232／RS-422／RS-485（has built-in isolated power circuit (Note 3)）Remote I/O Specialized 10M bps RS-422Motion Control Bus DMCNETFunction Key N/APerpetual Calendar Built-inCooling Method Natural air circulationSafety Approval CE／UL (Note 4)／KCC (Note 4)Waterproof Degree IP65／NEMA4Operation Voltage(Note5)DC +24V（-10% ~ +15%）（has built-in isolated power circuit (Note 3)）Voltage EnduranceAC500V for 1 minute (between charging (DC24V terminal)and FG terminals)Power Consumption(Note 5)11 WBackup Battery 3V lithium battery CR2032 x 1Backup Battery LifeIt depends on the temperature used and the conditions of usage,about 3 years or more at 25o C.OperationTemperature 0oC ~ 50o CStorage Temperature -20o C ~ +60o CAmbient Humidity 10% ~ 90% RH【0 ~ 40o C】，10% ~ 55% RH【41 ~ 50o C】，Pollution Degree 2Vibration IEC 61131-2 compliant 5Hz≦f＜8.3Hz = Continuous: 3.5mm, 8.3Hz≦f≦150Hz =Continuous: 1.0gShockIEC 60068-2-27 compliant 15g peak for 11 ms duration, X, Y, Z directions for 6timesDimensions(W) x (H) x (D) mm227.1 x 174.1 x 61Panel Cutout(W) x (H) mm219.4 X 166.5Weight Approx.1314 gis supplied to HMI. The life of LED backlight shown here is an estimated value under 25o C normal temperature andhumidity conditions.2) USB Host port can provide up to 5V/ 500mA of power.3) The withstand voltage of the isolated power circuit is 1500V peak for 1 minute.4) Some models are in the process of application to UL and KCC certification. For more information, please consultour distributors.5) The value of the power consumption indicates the electrical power consumed by HMI only without connecting toany peripheral devices. In order to ensure the normal operation, it is recommended to use a power supply whichthe capacity is 1.5 ~2 times the value of the power consumption.6) Users can download the Screen Editor V2.00, the program editor of Delta HMI product and the user manual via thefollowing link: /ia.7) The content of this quick start may be revised without prior notice. Please consult our distributors or download themost updated version at /ia.PIN1PIN1PIN1CALL NOW 800-985-6929/Email:***********************5012618102-H8022012-11-19HMC08 Yüksek Renk ‧Geniş Ekran‧Kullanımı Kolay HMI ÜrünleriBilgi Dokümanı(1) ÖnsözDELTA’nın HMC serisi operatör panellerini seçtiğiniz için teşekkürler. Bu bilgi dokümanı Delta HMI kurulum, bağlantı, bakım ve kontrolünde kullanıcıya yardımcı olacaktır. Doğru kullanım için ürünü kullanmadan önce bu dokümanı mutlaka okuyunuz. Kurulum, bağlantı ve çalışma yapmadan önce güvenlik uyarılarını tamamen anladığınızdan emin olunuz. Bu dokümanı daha sonra da kullanmak için iyi muhafaza ediniz. Lütfen aşağıdaki güvenlik uyarılarına dikkat ediniz:⏹ Ürününkurulumunuyanıcı gaz ve sıvılardan uzak kuru ve temiz ortamlara yapınız.⏹ Bağlantıları yaparken tüm bağlantı kurallarının sağlandığından emin olunuz.⏹ HMI’nın toprak bağlantısının doğru yapıldığından emin olunuz. Topraklama metodunun ürünün kurulduğu ülkestandartlarına uygun olduğuna emin olunuz (NFPA 70: National Electrical Code, 2005 Ed.).⏹HMI enerjili iken kablo bağlantısı yapmayınız ya da sökmeyiniz.⏹ Çalışma sırasında enerji besleme terminallerine dokunmayınız. Aksi halde elektrik şoku olabilir.Ürünün kullanımı ile ilgili sorularınız için, lütfen teknik servisimizle bağlantıya geçiniz. Herhangi bir ihbara gerek kalmaksızın bu bilgi dokümanının içeriği değiştirilebilir. Güncellenmiş versiyonu elde etmek için teknik servise danışabilir veya internet adresinden indirebilirsiniz. /ia(2) Güvenlik UyarılarıÜrünü alırken, kontrol ederken, kurulumunu yaparken, çalıştırırken, bakım ve arıza teşhisi yaparken aşağıdaki güvenlik uyarılarına dikkat ediniz. DANGER, WARNING, ve STOP başlıkları DELTA HMI ürününü kullanırken yapılması(3) Model AçıklamasıHMC 08 - N 5 00 S 5 2(1) (2) (3)(4)(5) (6)(7)(8)(1) ÜrünAdıHMC: Dahili Kontrolörlü HMI(2) LCM boyutu 08: 8-inch TFT LCD(3) Endüstri Tipi N: Genel Amaçlı(4) Display özellikleri 5: SVGA(5) Versiyon(6) Model Tipi S: Standart (dahili)(7) Harici Kontrol Arabirimi (Bus) 5: DMCNET(8) Uzak Birim Kontrolör Arabirimi 2: Özelleştirilmiş Yüksek-hızlı RS-422(4) Parça AdlarıHMC08-N500S52（Ön Görünüm）A Power LED Göstergesi（）HMI normal olarak çalışıyorken ışık Yeşil yanar.BÇalışma LED Göstergesi（）／Alarm LED Göstergesi（）Haberleşme gerçekleştiriliyor/Verilere erişiliyor iken Maviyanar. (Açıklama için “Not” bölümüne bakınız).Alarmlardan herhangi biri ON iken Kırmızı yanar.C Dokunmatik Ekran / DisplayNot:Çalışma LED göstergesi (mavi) tanımlaması serbest olarak kullanıcı tarafından tespit edilebilir.HMC08-N500S52（Arka Görünüm）A Power Giriş Terminali G USB HostBCOM3 (HMI’nın haberleşme sırasındaokuma ve yazma durumunu gösterir ikiadet LED gösterge vardır.)H Audio Çıkış ArabirimiCCOM2 (HMI’nın haberleşme sırasındaokuma ve yazma durumunu gösterir ikiadet LED gösterge vardır.)IHafıza kartı slotu / PilkapağıD COM1 J DMCNETE USB Slave K Uzak Modül ArabirimiF Ethernet Arabirimi（LAN）(5) Kurulum ve Saklama KoşullarıKurulum yapılana kadar ürün orjinal kutusu içinde muhafaza edilmelidir. Ürünün garanti kapsamının devamı için, ürünbelli bir süre kullanılmayacaksa, HMI uygun bir şekilde saklanmalıdır. Bazı saklama önerileri:⏹ Doğrudan güneşışığının temas etmediği kuru ve temiz ortamda saklanmalıdır.⏹-20°C - +60°C (-4°F - 140°F) sıcaklık aralığında saklanmalıdır.⏹10% - 90% rutubet aralığında ve yoğuşmasız ortamda saklanmalıdır.⏹ HMIaşındırıcı sıvı ve gaz bulunan ortamlarda saklanmamalıdır.⏹Ürün uygun paketlenmeli, sert ve düz bir yüzeyde saklanmalıdır.⏹ HMIdoğrudan güneşışığının temas ettiği yerlere ya da ısı yayan nesnelerin yakınına montajı yapılmamalıdır.⏹ HMIaşındırıcı gaz ve sıvının olduğu toz veya metal parçacıkların bulunduğu yerlere montajı yapılmamalıdır.⏹HMI dokümanda belirtilen sıcaklık ve rutubet oranları dışında ortamlara montajı yapılmamalıdır.⏹HMI dokümanda belirtilen titreşim ve şok oranlarının üzerindeki ortamlara montajı yapılmamalıdır.⏹HMI yüksek seviyede elektromanyetik radyasyonun bulunduğu ortamlara montajı yapılmamalıdır.(6) Kurulum ve BağlantıKurulum Notları:⏹ Yanlış kurulum yapılması ürünün zarar görmesini veya çalışma ömrünün kısalmasına sebep olur. HMIkurulumunun doküman da belirtildiği gibi yapılması gerekir⏹ HMI’nın havalandırmasının doğru olduğuna emin olmak için, havalandırma deliklerinin tıkalı olmadığına ve HMIetrafında gerekli boşluğun bırakıldığına emin olunuz⏹Panelin iyi korunduğuna emin olmak için, HMI içine su geçirmez conta koyduğunuza emin olunuz.⏹Düz yüzey, Tip 4X “Sadece kapalı alanda kullanım” ve eşdeğer ortamlarda kurulum yapılmalıdır.⏹Montaj için kullanılan panelin kalınlığı 5 mm’den az olmalıdır.Kurulum Metodu:Adım 1:HMI içine su geçirmez contanın takıldığına eminolunuz ve sonra pano boşluğuna yerleştiriniz.Adım 2:Montaj aparatlarını HMI’nın yuvalarınayerleştiriniz ve sonra panoya değene kadarvidaları sıkınız.Adım 3:Plastik kasaya zarar vermemek için vidayı0.7N.M’den az bir tork ile sıkınız.Tork: 6.17lb-inch(0.7N-M)Adım 4:Isı dağılımı sağlanabilmesi için HMI arka paneli ileduvar, kurulum yüzeyi veya başka kontrol cihazıarasında en az 60 mm boşluk bırakınız.Bağlantı özelliklerini aşağıdaki tabloda görebilirsiniz:Tip Kablo Ölçüsü (AWG) Soyma Uzunluğu TorkTek Damarlı28 ~ 12 7 ~ 8 mm 5 kg-cm（4.3 lb-in）Çok Damarlı30 ~ 12 7 ~ 8 mm 5 kg-cm（4.3 lb-in）Bağlantının aşağıdaki şekilde gösterildiği gibi yapıldığına emin olunuz. (Besleme konnektörü).BA ECALL NOW 800-985-6929/Email:***********************(7)Temel DenetimlerGenel Denetimler ●HMI ve donanım arasındaki bağlantı vidalarını periyodik olarak kontrol ediniz.Titreşim ve sıcaklık değişiminden dolayı gevşeyen vidaları sık ınız.●HMI içine, kontrol paneline veya havalandırma slot ve deliklerine yağ, su, metalparçalar veya yabancı nesnelerin düşmediğine emin olunuz. Bu durum ürüne zarar verir.● Kurulumu doğru yaptığınıza emin olunuz. Ortamda toz, zararlı gaz ve sıvılarolmamalıdır.Çalışma öncesi denetimler(enerji uygulanmadan önce) ● Tüm bağlantı terminallerinin doğru izole olduğundan emin olunuz.●Zarar ve hasar meydana gelmemesi için tüm bağlantıların doğru yapıldığına eminolunuz.●HMI içinde kullanılmayan vidaların, metal parçaların, iletken veya yanıcımaddelerin olmadığını gözle kontrol ediniz.●Ürünü etkileyebilecek elektromanyetik gürültünün düşük olduğuna emin olunuz.●HMI ünitesine uygulanan harici voltajın doğru ve ürüne uygun olduğunu kontrolediniz.Çalışma öncesi denetimler(enerji uygulandıktan sonra) ● Power LED ışığının yandığını kontrol ediniz.● Cihazlar arasında haberleşmenin normal olduğunu kontrol ediniz.●Anormal bir durum ile karşılaştığınızda teknik servisimizle bağlantıya geçiniz.(8)Seri Haberleşme Pin AçıklamasıCOM1 Port（Akış denetimi Destekler）COM Port PINKontakRS-23212 RXD3 TXD45 GND67 RTS8 CTS9Not: Boş = Bağlantı yapılmaz.COM2 Port（Akış denetimi Destekler）COM Port PINMODE1 MODE2 MODE3RS-232 RS-422 RS-4851 TXD+ D+2 RXD3 TXD4 RXD+5 GND GND GND6 TXD- D-7 RTS8 CTS9 RXD-Not1: Boş = Bağlantı yapılmaz.Not2: COM2 port RS-232 akış denetimi için kullanıldığında, RTS ve CTS sinyalleri akış denetimi için kullanılır ve COM3portu bu fonksiyonu gerçekleştiremeyecektir.Not3: COM2 port RS-422 akış denetimi için kullanıldığında lütfen pin atamaları için COM3 port sinyal tablosunabakınız. Akış denetimi için kullanılan RTS+, CTS+, RTS- ve CTS- sinyalleri parantez içerisindegösterilmiştir.COM3 PortCOM Port PINMODE1 MODE2 MODE3RS-232 RS-422 RS-4851TXD+(RTS+)D+2 RXD3 TXD4 RXD+(CTS+)5 GND GND GND6 TXD-(RTS-) D-789 RXD-(CTS-)Not1: Boş = Bağlantı yapılmaz.Not2: COM2 port RS-422 akış denetimi için kullanıldığında lütfen pin atamaları için COM3 port sinyal tablosuna bakınız.Akış denetimi için kullanılan RTS+, CTS+, RTS- ve CTS- sinyalleri parantez içerisinde gösterilmiştir.Ethernet Arabirimi (LAN)Ethernet Interface (LAN) PINKontakEthernet1 TX+2 TX-3 RX+456 RX-78Not: Boş = Bağlantı yapılmaz.DMCNETEthernet Arabirimi(LAN) PIN MOD1 D1+2 D1-3 D2+456 D2-78Not: Boş = Bağlantı yapılmaz.Uzak ModülEthernet Arabirimi (LAN) PIN Kontak1234 TX+5 TX-67 RX+8 RX-Not: Boş = Bağlantı yapılmaz.(9) ÖlçülerHMC08-N500S52(10) ÖzelliklerMODEL HMC08-N500S52LCD MODÜL Display Tipi 8”TFT LCD（65536 renk）Çözünürlük 800 x 600 pixelAydınlatma LED Aydınlatma(25o C yarım ömürde 20,000 saatten az) (Not 1)Display Ölçüsü 162 x 121.5mmİşletim Sistemi Delta Real Time OSMCUHMI 32-bit RISC Micro-controllerKontrolör 32-bit DSPNOR Flash ROMFlash ROM 128 MB(OS Sistem: 30MB / Backup: 16MB / Kullanıcı Uygulama:82MB)SDRAM 64MbyteBackup Memory(Byte)16MbyteSesEfektÇıkışıBuzzer Multi-Tone Frekans（2K ~ 4K Hz）／85dBAUX Stereo çıkışEthernet ArabirimiIEEE 802.3, IEEE 802.3u10/100 Mbps auto-sensing（(dahili izole edilmiş güç devresi mevcut (Not 3)）Memory Card SD Kard (SDHC destekler)USB 1 USB Host (Not2)Ver 1.1 / 1 USB Slave Ver 2.0SeriCOMPortCOM1 RS-232（donanım akış denetimi destekler）COM2RS-232／RS-422／RS-485（dahili izole edilmiş güç devresi mevcut (Not 3)）COM3RS-232／RS-422／RS-485（dahili izole edilmiş güç devresi mevcut (Not 3)）Uzak I/O Özel 10Mbps RS-422Motion Control Bus DMCNETFonksiyon Tuşu N/AGerçek Zaman Saati DahiliSoğutma Metodu Doğal hava sirkülasyonuGüvenlik OnayıCE／UL (Not 4)／KCC (Not 4)Su GeçirmezlikDerecesi IP65／NEMA4Çalışma Voltajı (Not 5)DC +24V（-10% ~ +15%）（dahili izole edilmiş güç devresi mevcut (Not 3)）Voltaj Dayanımı1 dakika için AC500V (besleme (DC24V terminal)ve FG terminalleri arasında)Güç Tüketimi (Not 5)11 WBackup Pili 3V lityum pil CR2032 x 1Backup Pil ÖmrüKullanım koşulları ve ortam sıcaklığına bağlıolarak 25o C’de yaklaşık 3 yıl veya üzeri.Çalışma Sıcaklığı0o C ~ 50o CSaklama Sıcaklığı-20o C ~ +60o CRutubet Oranı10% ~ 90% RH [0 ~ 40oC], 10% ~ 55% RH [41 ~ 50o C]Kirlenme Derecesi 2TitreşimIEC 61131-2 uyumlu 5Hz≦f＜8.3Hz = Sürekli: 3.5mm,8.3Hz≦f≦150Hz = Sürekli: 1.0gŞokIEC 60068-2-27 uyumlu 11ms süresince 15g pik,X, Y, Z yönünde 6 defaÖlçüler(W) x (H) x (D) mm227.1 x 174.1 x 61Panel Kesim Ölçüsü(W) x (H) mm219.4 X 166.5Ağırlık Yaklaşık.1314gYukarıda gösterilen arka ışık LED aydınlatma ömrü 25o C ‘de derecede normal sıcaklık ve rutubet ortamında tahminedilen değerlerdir.2) USB Host port 5V/ 500mA ‘e kadar güç sağlar.3) İzole güç devresinin dayanma gerilimi 1 dakika için 1500V pik değerindedir.4) Bazı modeller UL ve KCC sertifika başvuru süreci içindedirler. Daha fazla bilgi için firmamızla temasa geçiniz.5) Güç tüketimi HMI ünitesinin hiç bir cihaza bağlı olmadan boş olarak tükettiği gücü gösterir. Normal çalışmadaHMI’nın boş iken tükettiği gücün 1.5 veya 2 katı güç verebilen besleme kaynağı kullanılması tavsiye edilir.6) Aşağıdaki linkten Delta HMI ürünleri için kullanım klavuzu ve Screen Editor programını indirebilirsiniz:/ia.7) Herhangi bir ihbar olmadan bu dokümanın içeriği değiştirilebilir. En son güncellenmiş halini firmamızdan talepedebilir yada aşağıdaki link adresinden indirebilirsiniz /ia.TÜRKİYEİTHALATÇI FİRMA:F.A.S.T. Fabrika Aygıtları Sistem Teknolojisi Ltd.Şti.Fast Plaza Atilla İlhan Cad No:5334750 Ataşehir/İSTANBULT: +90 216 574 9434 F: +90 216 574 1660E: ***************** W: PIN1PIN1PIN1CALL NOW 800-985-6929/Email:***********************5012618102-H8022012-11-19HMC08高彩‧可控制‧友善人機介面安裝說明(1) 一般注意事項感謝您使用本產品，本人機介面安裝說明書提供HMC系列人機介面的相關資訊。
proe基本操作命令
工字模（I-type），都含有凸出的工字板和底板，且导柱被工字板所盖；直身模（H-type），无工字板，底板不凸出，和模座齐平；直身模加面板（T-type），也有工字板，但和模座齐平。
模具刚SKD11,通用的高耐磨性冷作模具钢，具有良好的淬透性。
化学成分：C,Si,Mn,P,S,Ni,Cr,W,Mo,V,Co……AI-2023-A40-B30-C70【窗口】Pro/E提供的10种类型的功能模块：a.草绘：建立2D草绘文件，扩展名为.secb.零件：建立3D零件模型文件，扩展名为.prt.xc.组件：建立3D模型安装文件，扩展名为.asm.xd.制造：NC加工程序制作，模具设计，扩展名为.mfg.xe.绘图：建立2D工程图，扩展名为.drwf.格式：建立2D工程图的图纸格式，扩展名为.frmg.报表：建立模型报表，扩展名为.reph.图表：建立电路，管路流程图，扩展名为.dgmi.布局：建立产品组装布局，扩展名.layj.标记：注解，扩展名为.mrk。
pro/e中还提供保存文件的副本，相当于输出文件，因此在pro/e 中经常用保存副本把文件导出成其他软件的文件格式，如meu,jpg 等。
Delete(所画中心线和指定的参照也可以被删除，而软件界面所给工具不可以)插入→共享数据→自文件（dxf），形成输入特征标识Pro/E基本建模及曲面编辑命令：1）【拉伸】一个平面上的二维截面沿其垂直方向拉伸生成的图形称为拉伸特征。
插入→拉伸→放置→定义草绘。
种类分为拉伸为实体、曲面两种。
拉伸深度可以定义数字，也可拉伸到选定的点、曲线、平面或曲面，又可对称拉伸。
去除材料。
加厚草绘。
属性：拉伸_x（自动生成的名字，可以自定义）。
2）【旋转】一个平面上的截面绕一个轴旋转生成的图形称为旋转特征。
插入→旋转→位置→定义草绘。
在草绘环境中绘制一条中心线（内部CL）和一个截面。
注意：旋转轴与截面图形应处在同一平面内；旋转特征的草绘图应位于旋转轴单侧，且不能自相交。
MG 3电路图
左后ABS传感器 (T152)
右后ABS传感器 (T151)
C0503-1 C0503-2
右前ABS传感器 (T149)
A NK, 4.0D C0506-18 C0506-5 C0506-4 B NK, 4.0D C0506-17 C0506-7 C0506-6 Y, MDE Y, MDE R, MDB R, MDB C0517-1 C0517-2 C0516-1 C0516-2
后尾门开关 (S181)
C0221-1 C1681-1 B, 1.5D A9 B, 2.5D C1919 C1918-1
车身控制单元(BCU) (D162)
C0661-10 PR, 0.5D A664 PR, 1.0D B664 PR, 1.0D
PR, 1.0D
C1914 C1915-8
PR, 1.0D
C0607 C0494-5
发动机舱保险丝盒 (P108)
C0632-1 易熔丝 1 150.0 A 保险丝 5 25.0 A 易熔丝 3 40.0 A B, 3.0D C0563-1 C0571-3 NP, 4.0D C0495 C0608-1 B, 2.5D A2 B, 2.5D C0576-6 P, 2.0D A43 P, 2.0D C0663-1
12.0 V
UP, 4.0D A B C
发动机舱保险丝盒 (P108)
C0632-1
BS, 4.0D C0574-1 NK, 0.5D PS, 4.0D
易熔丝 8 20.0 A 易熔丝 11 40.0 A
主继电器 (R100)
C0573-1
发动机控制模块(ECM) (D131)
C0574-3 C0570-4 C0913-60 UY, 0.5D D
精准王系列中文诊断卡错误代码含义表
精准王系列中文诊断卡错误代码含义表BIOS 代码Phoenix/Tan Award AMIdy3000同FF（见第同FF（见第00 同 FF（见第页）页）页）01 02处理器测试 1，处处理器寄存器CPU 寄存器理器状态核实，如的测试即将开测试正在进行果测试失败，循环始，非屏蔽中断或者失灵。
建是无限的。
试换即将停用。
建议议排除方法同CPU，查 CPU跳线排除方法同左左或 CPU设置错否？确定诊断的类型(正常或者制造 )。
使用非屏蔽中CMOS 写入 /如果键盘缓冲器断；通过延迟开读出正在进行含有数据就会失或者失灵。
试始。
查计算机主效。
试查计算机主查计算机主板板和 CPU。
板中与键盘相关电池等。
电路及键盘本身。
ROM BIOS 清除 8042 键盘控检查部件正在制器，发出通电延迟已完进行或失灵。
03 TEST-KBRD 命令查计算机主板成BIOS 芯片是(AAH) 。
查键盘内否已插好或周部电路及软件。
边电路发霉。
使 8042 键盘控制可编程间隔定键盘控制器较时器的测试正器重定，核实复位／通电测在进行或失04TESTKBRD 。
查计试。
查计算机主灵。
查计算机算机主板中键盘板中的键盘控主板中与制部分的电路。
定时器相关的接口电路。
电路。
已确定软复位DMA 初始页如果不断重复制面寄存器读／／通电；即将启造测试 1 至 5，可写测试正在进动 ROM. 。
查计05获得 8042 控制状行或失灵。
查算机主板 ROM 计算机主板中态。
查计算机主板芯片及其支持与 DMA有关的中键盘控制电路。
电路。
芯片及其外围电路。
使电路片作初始准备，停用视频、奇偶性、 DMA电路片，以及清除DMA电路片，所06有页面寄存器和CMOS寄存器的工作。
查计算机主板中与 DMA相关的电路。
处理器测试 2，核ROM BIOS 检查总和正常， 键盘缓冲器已清实 CPU 寄存器的除，向键盘发出7工作。
查 CPU 是否BAT( 基 本 保 证插好，或 CPU 坏，测试 )命令。