VSICM51_M12_HostScalability
ic5141使用教程
图 1.17
编辑后 inv 的 symbol
保存并退出 symbol 的编辑界面， 同样退出原理图编辑器。 至此原理图的输入 完成。
5．创建仿真电路图
完成电路原理图的输入之后， 为了对设计进行仿真和性能分析， 需要建立一 个仿真平台，将电源、各种激励信号输入待测的电路 inv，然后采用仿真器进行 分析。 （1） 建立设计原理图： 在命令解释器窗口 CIW 中选菜单项 FileNewCellview , 出现“Create New File”对话框，如图 1.18 所示填写、选择相应的选项，点击 OK 按钮，进入原理图编辑器 virtuoso schematic editor 界面。 （同前述电路原理图 输入时的操作一样） 。
仍然是按照图 1.19 的内容填写表项，点击 Hide 按钮，在原理图编辑其中就 会出现编辑过的 inv 的 symbol， 直接摆放即可。 同样的操作添加 vdd 和 gnd 符号， 注意这里采用的是 analogLIb 库中的元件 （在测试电路图中除待测电路 dut 之外， 其余器件均来自 analogLib） 。添加电源和地选符号项选择列表如下图 1.20、1.21 所示。
图 1.14
inv 原理图
4．创建 symbol
完成原理图之后，为便于进行仿真，需要进行 symbol 的创建。 （1）生成符号图：在原理图编辑窗口，点击菜单项 DesignCreate Cellview From Cellview，出现 symbol 生成选项表（图 1.15 上部分） ，点击 OK 按钮出现 图 1.15 下部分。
ConnectCore Wi-MX51 支持有线和无线网络的高端核心模块 说明书
产品特点• 高端低功耗32位模块化系统解决方案• 集成10/100/(1000) Mbit 以太网• 获得认证的802.11a/b/g/n 无线以太网接口• 芯片内置硬件加密引擎• 功能强大的硬件加速高清多媒体功能• 工业级宽温 • 低电磁辐射设计，符合 FCC Class B• 可选ZigBee ,无线蜂窝和卫星连接• Windows Embedded CE 6.0 和 Linux 平台支持，支持有线和无线网络的高端核心模块设计服务技术支持软件平台支持ConnectCore ™ Wi-MX51PRELIMINARY高端Cortex-A8模块化系统解决方案，实现了业界领先的性能，低功耗，完整集成 802.11a/b/g/n 无线以太网和有线以太网。
支持网络功能的ConnectCore Wi-MX51是高集成度和符合未来发展趋势的模块化系统解决方案，基于最新的Freescalei.MX51 用处理器，采用高性能的ARM Cortex-A8 内核，集成功能强大的多媒体功能和一系列外设。
充分结合了快速集成、可靠性和设计灵活性于一个随时可用的模块化系统和完整的设备外软件开发平台，支持Microsoft Windows Embedded CE 6.0和 Digi Embedded Linux 。
具备业界领先的性能和诸如双显示接口与硬件加密引擎，它是多种目标市场和应用的理想选择，包括医疗、数字广告、安全控制、零售，工业/楼宇自动化、交通运输等。
完整和高性价比的Digi JumpStart 开发包使你可以立即进行专业的嵌入式产品开发，大幅度减少设计风险和产品上市时间。
®®®®®®产品简介开发包天 Visual Studio 2005和Windows Embedded CE 6.0 评测版Freescale i.MX51600/800 MHz •处理器型号主频模块特点•不是所有信号都同时可用，有些管脚是复用的。
VS41ICMrevA_M11_Scalability
Operations
Access Control Resource Monitoring Data Protection Scalability High Availability Patch Management Installing VMware ESX and ESXi
VMware vSphere 4.1: Install, Configure, Manage – Revision A
可扩展性
Module 11
© 2010 VMware Inc. All rights reserved
You Are Here
vSphere Environment
Introduction to VMware Virtualization VMware ESX and ESXi VMware vCenter Server Networking Storage Virtual Machines
VMware vSphere 4.1: Install, Configure, Manage – Revision A
Module 11-19
© 2010 VMware Inc. All rights reserved
Basic Workflow to Implement Host Profiles
Module 11-18
© 2010 VMware Inc. All rights reserved
主机配置文件
主机配置文件移除了主机个性化的 配置，保留了数据中心通用和标准 的配置。 优势: 简化ESX/ESXi 主机管理的配 置和修改设置工作 让发现违规配置 更加简单 自动纠正配置
观察依从性
VMware vSphere 4.1: Install, Configure, Manage – Revision A
Native Instruments MASCHINE MK3 用户手册说明书
The information in this document is subject to change without notice and does not represent a commitment on the part of Native Instruments GmbH. The software described by this docu-ment is subject to a License Agreement and may not be copied to other media. No part of this publication may be copied, reproduced or otherwise transmitted or recorded, for any purpose, without prior written permission by Native Instruments GmbH, hereinafter referred to as Native Instruments.“Native Instruments”, “NI” and associated logos are (registered) trademarks of Native Instru-ments GmbH.ASIO, VST, HALion and Cubase are registered trademarks of Steinberg Media Technologies GmbH.All other product and company names are trademarks™ or registered® trademarks of their re-spective holders. Use of them does not imply any affiliation with or endorsement by them.Document authored by: David Gover and Nico Sidi.Software version: 2.8 (02/2019)Hardware version: MASCHINE MK3Special thanks to the Beta Test Team, who were invaluable not just in tracking down bugs, but in making this a better product.NATIVE INSTRUMENTS GmbH Schlesische Str. 29-30D-10997 Berlin Germanywww.native-instruments.de NATIVE INSTRUMENTS North America, Inc. 6725 Sunset Boulevard5th FloorLos Angeles, CA 90028USANATIVE INSTRUMENTS K.K.YO Building 3FJingumae 6-7-15, Shibuya-ku, Tokyo 150-0001Japanwww.native-instruments.co.jp NATIVE INSTRUMENTS UK Limited 18 Phipp StreetLondon EC2A 4NUUKNATIVE INSTRUMENTS FRANCE SARL 113 Rue Saint-Maur75011 ParisFrance SHENZHEN NATIVE INSTRUMENTS COMPANY Limited 5F, Shenzhen Zimao Center111 Taizi Road, Nanshan District, Shenzhen, GuangdongChina© NATIVE INSTRUMENTS GmbH, 2019. All rights reserved.Table of Contents1Welcome to MASCHINE (25)1.1MASCHINE Documentation (26)1.2Document Conventions (27)1.3New Features in MASCHINE 2.8 (29)1.4New Features in MASCHINE 2.7.10 (31)1.5New Features in MASCHINE 2.7.8 (31)1.6New Features in MASCHINE 2.7.7 (32)1.7New Features in MASCHINE 2.7.4 (33)1.8New Features in MASCHINE 2.7.3 (36)2Quick Reference (38)2.1Using Your Controller (38)2.1.1Controller Modes and Mode Pinning (38)2.1.2Controlling the Software Views from Your Controller (40)2.2MASCHINE Project Overview (43)2.2.1Sound Content (44)2.2.2Arrangement (45)2.3MASCHINE Hardware Overview (48)2.3.1MASCHINE Hardware Overview (48)2.3.1.1Control Section (50)2.3.1.2Edit Section (53)2.3.1.3Performance Section (54)2.3.1.4Group Section (56)2.3.1.5Transport Section (56)2.3.1.6Pad Section (58)2.3.1.7Rear Panel (63)2.4MASCHINE Software Overview (65)2.4.1Header (66)2.4.2Browser (68)2.4.3Arranger (70)2.4.4Control Area (73)2.4.5Pattern Editor (74)3Basic Concepts (76)3.1Important Names and Concepts (76)3.2Adjusting the MASCHINE User Interface (79)3.2.1Adjusting the Size of the Interface (79)3.2.2Switching between Ideas View and Song View (80)3.2.3Showing/Hiding the Browser (81)3.2.4Showing/Hiding the Control Lane (81)3.3Common Operations (82)3.3.1Using the 4-Directional Push Encoder (82)3.3.2Pinning a Mode on the Controller (83)3.3.3Adjusting Volume, Swing, and Tempo (84)3.3.4Undo/Redo (87)3.3.5List Overlay for Selectors (89)3.3.6Zoom and Scroll Overlays (90)3.3.7Focusing on a Group or a Sound (91)3.3.8Switching Between the Master, Group, and Sound Level (96)3.3.9Navigating Channel Properties, Plug-ins, and Parameter Pages in the Control Area.973.3.9.1Extended Navigate Mode on Your Controller (102)3.3.10Navigating the Software Using the Controller (105)3.3.11Using Two or More Hardware Controllers (106)3.3.12Touch Auto-Write Option (108)3.4Native Kontrol Standard (110)3.5Stand-Alone and Plug-in Mode (111)3.5.1Differences between Stand-Alone and Plug-in Mode (112)3.5.2Switching Instances (113)3.5.3Controlling Various Instances with Different Controllers (114)3.6Host Integration (114)3.6.1Setting up Host Integration (115)3.6.1.1Setting up Ableton Live (macOS) (115)3.6.1.2Setting up Ableton Live (Windows) (116)3.6.1.3Setting up Apple Logic Pro X (116)3.6.2Integration with Ableton Live (117)3.6.3Integration with Apple Logic Pro X (119)3.7Preferences (120)3.7.1Preferences – General Page (121)3.7.2Preferences – Audio Page (126)3.7.3Preferences – MIDI Page (130)3.7.4Preferences – Default Page (133)3.7.5Preferences – Library Page (137)3.7.6Preferences – Plug-ins Page (145)3.7.7Preferences – Hardware Page (150)3.7.8Preferences – Colors Page (154)3.8Integrating MASCHINE into a MIDI Setup (156)3.8.1Connecting External MIDI Equipment (156)3.8.2Sync to External MIDI Clock (157)3.8.3Send MIDI Clock (158)3.9Syncing MASCHINE using Ableton Link (159)3.9.1Connecting to a Network (159)3.9.2Joining and Leaving a Link Session (159)3.10Using a Pedal with the MASCHINE Controller (160)3.11File Management on the MASCHINE Controller (161)4Browser (163)4.1Browser Basics (163)4.1.1The MASCHINE Library (163)4.1.2Browsing the Library vs. Browsing Your Hard Disks (164)4.2Searching and Loading Files from the Library (165)4.2.1Overview of the Library Pane (165)4.2.2Selecting or Loading a Product and Selecting a Bank from the Browser (170)4.2.2.1[MK3] Browsing by Product Category Using the Controller (174)4.2.2.2[MK3] Browsing by Product Vendor Using the Controller (174)4.2.3Selecting a Product Category, a Product, a Bank, and a Sub-Bank (175)4.2.3.1Selecting a Product Category, a Product, a Bank, and a Sub-Bank on theController (179)4.2.4Selecting a File Type (180)4.2.5Choosing Between Factory and User Content (181)4.2.6Selecting Type and Character Tags (182)4.2.7List and Tag Overlays in the Browser (186)4.2.8Performing a Text Search (188)4.2.9Loading a File from the Result List (188)4.3Additional Browsing Tools (193)4.3.1Loading the Selected Files Automatically (193)4.3.2Auditioning Instrument Presets (195)4.3.3Auditioning Samples (196)4.3.4Loading Groups with Patterns (197)4.3.5Loading Groups with Routing (198)4.3.6Displaying File Information (198)4.4Using Favorites in the Browser (199)4.5Editing the Files’ Tags and Properties (203)4.5.1Attribute Editor Basics (203)4.5.2The Bank Page (205)4.5.3The Types and Characters Pages (205)4.5.4The Properties Page (208)4.6Loading and Importing Files from Your File System (209)4.6.1Overview of the FILES Pane (209)4.6.2Using Favorites (211)4.6.3Using the Location Bar (212)4.6.4Navigating to Recent Locations (213)4.6.5Using the Result List (214)4.6.6Importing Files to the MASCHINE Library (217)4.7Locating Missing Samples (219)4.8Using Quick Browse (221)5Managing Sounds, Groups, and Your Project (225)5.1Overview of the Sounds, Groups, and Master (225)5.1.1The Sound, Group, and Master Channels (226)5.1.2Similarities and Differences in Handling Sounds and Groups (227)5.1.3Selecting Multiple Sounds or Groups (228)5.2Managing Sounds (233)5.2.1Loading Sounds (235)5.2.2Pre-listening to Sounds (236)5.2.3Renaming Sound Slots (237)5.2.4Changing the Sound’s Color (237)5.2.5Saving Sounds (239)5.2.6Copying and Pasting Sounds (241)5.2.7Moving Sounds (244)5.2.8Resetting Sound Slots (245)5.3Managing Groups (247)5.3.1Creating Groups (248)5.3.2Loading Groups (249)5.3.3Renaming Groups (251)5.3.4Changing the Group’s Color (251)5.3.5Saving Groups (253)5.3.6Copying and Pasting Groups (255)5.3.7Reordering Groups (258)5.3.8Deleting Groups (259)5.4Exporting MASCHINE Objects and Audio (260)5.4.1Saving a Group with its Samples (261)5.4.2Saving a Project with its Samples (262)5.4.3Exporting Audio (264)5.5Importing Third-Party File Formats (270)5.5.1Loading REX Files into Sound Slots (270)5.5.2Importing MPC Programs to Groups (271)6Playing on the Controller (275)6.1Adjusting the Pads (275)6.1.1The Pad View in the Software (275)6.1.2Choosing a Pad Input Mode (277)6.1.3Adjusting the Base Key (280)6.1.4Using Choke Groups (282)6.1.5Using Link Groups (284)6.2Adjusting the Key, Choke, and Link Parameters for Multiple Sounds (286)6.3Playing Tools (287)6.3.1Mute and Solo (288)6.3.2Choke All Notes (292)6.3.3Groove (293)6.3.4Level, Tempo, Tune, and Groove Shortcuts on Your Controller (295)6.3.5Tap Tempo (299)6.4Performance Features (300)6.4.1Overview of the Perform Features (300)6.4.2Selecting a Scale and Creating Chords (303)6.4.3Scale and Chord Parameters (303)6.4.4Creating Arpeggios and Repeated Notes (316)6.4.5Swing on Note Repeat / Arp Output (321)6.5Using Lock Snapshots (322)6.5.1Creating a Lock Snapshot (322)6.5.2Using Extended Lock (323)6.5.3Updating a Lock Snapshot (323)6.5.4Recalling a Lock Snapshot (324)6.5.5Morphing Between Lock Snapshots (324)6.5.6Deleting a Lock Snapshot (325)6.5.7Triggering Lock Snapshots via MIDI (326)6.6Using the Smart Strip (327)6.6.1Pitch Mode (328)6.6.2Modulation Mode (328)6.6.3Perform Mode (328)6.6.4Notes Mode (329)7Working with Plug-ins (330)7.1Plug-in Overview (330)7.1.1Plug-in Basics (330)7.1.2First Plug-in Slot of Sounds: Choosing the Sound’s Role (334)7.1.3Loading, Removing, and Replacing a Plug-in (335)7.1.3.1Browser Plug-in Slot Selection (341)7.1.4Adjusting the Plug-in Parameters (344)7.1.5Bypassing Plug-in Slots (344)7.1.6Using Side-Chain (346)7.1.7Moving Plug-ins (346)7.1.8Alternative: the Plug-in Strip (348)7.1.9Saving and Recalling Plug-in Presets (348)7.1.9.1Saving Plug-in Presets (349)7.1.9.2Recalling Plug-in Presets (350)7.1.9.3Removing a Default Plug-in Preset (351)7.2The Sampler Plug-in (352)7.2.1Page 1: Voice Settings / Engine (354)7.2.2Page 2: Pitch / Envelope (356)7.2.3Page 3: FX / Filter (359)7.2.4Page 4: Modulation (361)7.2.5Page 5: LFO (363)7.2.6Page 6: Velocity / Modwheel (365)7.3Using Native Instruments and External Plug-ins (367)7.3.1Opening/Closing Plug-in Windows (367)7.3.2Using the VST/AU Plug-in Parameters (370)7.3.3Setting Up Your Own Parameter Pages (371)7.3.4Using VST/AU Plug-in Presets (376)7.3.5Multiple-Output Plug-ins and Multitimbral Plug-ins (378)8Using the Audio Plug-in (380)8.1Loading a Loop into the Audio Plug-in (384)8.2Editing Audio in the Audio Plug-in (385)8.3Using Loop Mode (386)8.4Using Gate Mode (388)9Using the Drumsynths (390)9.1Drumsynths – General Handling (391)9.1.1Engines: Many Different Drums per Drumsynth (391)9.1.2Common Parameter Organization (391)9.1.3Shared Parameters (394)9.1.4Various Velocity Responses (394)9.1.5Pitch Range, Tuning, and MIDI Notes (394)9.2The Kicks (395)9.2.1Kick – Sub (397)9.2.2Kick – Tronic (399)9.2.3Kick – Dusty (402)9.2.4Kick – Grit (403)9.2.5Kick – Rasper (406)9.2.6Kick – Snappy (407)9.2.7Kick – Bold (409)9.2.8Kick – Maple (411)9.2.9Kick – Push (412)9.3The Snares (414)9.3.1Snare – Volt (416)9.3.2Snare – Bit (418)9.3.3Snare – Pow (420)9.3.4Snare – Sharp (421)9.3.5Snare – Airy (423)9.3.6Snare – Vintage (425)9.3.7Snare – Chrome (427)9.3.8Snare – Iron (429)9.3.9Snare – Clap (431)9.3.10Snare – Breaker (433)9.4The Hi-hats (435)9.4.1Hi-hat – Silver (436)9.4.2Hi-hat – Circuit (438)9.4.3Hi-hat – Memory (440)9.4.4Hi-hat – Hybrid (442)9.4.5Creating a Pattern with Closed and Open Hi-hats (444)9.5The Toms (445)9.5.1Tom – Tronic (447)9.5.2Tom – Fractal (449)9.5.3Tom – Floor (453)9.5.4Tom – High (455)9.6The Percussions (456)9.6.1Percussion – Fractal (458)9.6.2Percussion – Kettle (461)9.6.3Percussion – Shaker (463)9.7The Cymbals (467)9.7.1Cymbal – Crash (469)9.7.2Cymbal – Ride (471)10Using the Bass Synth (474)10.1Bass Synth – General Handling (475)10.1.1Parameter Organization (475)10.1.2Bass Synth Parameters (477)11Working with Patterns (479)11.1Pattern Basics (479)11.1.1Pattern Editor Overview (480)11.1.2Navigating the Event Area (486)11.1.3Following the Playback Position in the Pattern (488)11.1.4Jumping to Another Playback Position in the Pattern (489)11.1.5Group View and Keyboard View (491)11.1.6Adjusting the Arrange Grid and the Pattern Length (493)11.1.7Adjusting the Step Grid and the Nudge Grid (497)11.2Recording Patterns in Real Time (501)11.2.1Recording Your Patterns Live (501)11.2.2The Record Prepare Mode (504)11.2.3Using the Metronome (505)11.2.4Recording with Count-in (506)11.2.5Quantizing while Recording (508)11.3Recording Patterns with the Step Sequencer (508)11.3.1Step Mode Basics (508)11.3.2Editing Events in Step Mode (511)11.3.3Recording Modulation in Step Mode (513)11.4Editing Events (514)11.4.1Editing Events with the Mouse: an Overview (514)11.4.2Creating Events/Notes (517)11.4.3Selecting Events/Notes (518)11.4.4Editing Selected Events/Notes (526)11.4.5Deleting Events/Notes (532)11.4.6Cut, Copy, and Paste Events/Notes (535)11.4.7Quantizing Events/Notes (538)11.4.8Quantization While Playing (540)11.4.9Doubling a Pattern (541)11.4.10Adding Variation to Patterns (541)11.5Recording and Editing Modulation (546)11.5.1Which Parameters Are Modulatable? (547)11.5.2Recording Modulation (548)11.5.3Creating and Editing Modulation in the Control Lane (550)11.6Creating MIDI Tracks from Scratch in MASCHINE (555)11.7Managing Patterns (557)11.7.1The Pattern Manager and Pattern Mode (558)11.7.2Selecting Patterns and Pattern Banks (560)11.7.3Creating Patterns (563)11.7.4Deleting Patterns (565)11.7.5Creating and Deleting Pattern Banks (566)11.7.6Naming Patterns (568)11.7.7Changing the Pattern’s Color (570)11.7.8Duplicating, Copying, and Pasting Patterns (571)11.7.9Moving Patterns (574)11.7.10Adjusting Pattern Length in Fine Increments (575)11.8Importing/Exporting Audio and MIDI to/from Patterns (576)11.8.1Exporting Audio from Patterns (576)11.8.2Exporting MIDI from Patterns (577)11.8.3Importing MIDI to Patterns (580)12Audio Routing, Remote Control, and Macro Controls (589)12.1Audio Routing in MASCHINE (590)12.1.1Sending External Audio to Sounds (591)12.1.2Configuring the Main Output of Sounds and Groups (596)12.1.3Setting Up Auxiliary Outputs for Sounds and Groups (601)12.1.4Configuring the Master and Cue Outputs of MASCHINE (605)12.1.5Mono Audio Inputs (610)12.1.5.1Configuring External Inputs for Sounds in Mix View (611)12.2Using MIDI Control and Host Automation (614)12.2.1Triggering Sounds via MIDI Notes (615)12.2.2Triggering Scenes via MIDI (622)12.2.3Controlling Parameters via MIDI and Host Automation (623)12.2.4Selecting VST/AU Plug-in Presets via MIDI Program Change (631)12.2.5Sending MIDI from Sounds (632)12.3Creating Custom Sets of Parameters with the Macro Controls (636)12.3.1Macro Control Overview (637)12.3.2Assigning Macro Controls Using the Software (638)12.3.3Assigning Macro Controls Using the Controller (644)13Controlling Your Mix (646)13.1Mix View Basics (646)13.1.1Switching between Arrange View and Mix View (646)13.1.2Mix View Elements (647)13.2The Mixer (649)13.2.1Displaying Groups vs. Displaying Sounds (650)13.2.2Adjusting the Mixer Layout (652)13.2.3Selecting Channel Strips (653)13.2.4Managing Your Channels in the Mixer (654)13.2.5Adjusting Settings in the Channel Strips (656)13.2.6Using the Cue Bus (660)13.3The Plug-in Chain (662)13.4The Plug-in Strip (663)13.4.1The Plug-in Header (665)13.4.2Panels for Drumsynths and Internal Effects (667)13.4.3Panel for the Sampler (668)13.4.4Custom Panels for Native Instruments Plug-ins (671)13.4.5Undocking a Plug-in Panel (Native Instruments and External Plug-ins Only) (675)13.5Controlling Your Mix from the Controller (677)13.5.1Navigating Your Channels in Mix Mode (678)13.5.2Adjusting the Level and Pan in Mix Mode (679)13.5.3Mute and Solo in Mix Mode (680)13.5.4Plug-in Icons in Mix Mode (680)14Using Effects (681)14.1Applying Effects to a Sound, a Group or the Master (681)14.1.1Adding an Effect (681)14.1.2Other Operations on Effects (690)14.1.3Using the Side-Chain Input (692)14.2Applying Effects to External Audio (695)14.2.1Step 1: Configure MASCHINE Audio Inputs (695)14.2.2Step 2: Set up a Sound to Receive the External Input (698)14.2.3Step 3: Load an Effect to Process an Input (700)14.3Creating a Send Effect (701)14.3.1Step 1: Set Up a Sound or Group as Send Effect (702)14.3.2Step 2: Route Audio to the Send Effect (706)14.3.3 A Few Notes on Send Effects (708)14.4Creating Multi-Effects (709)15Effect Reference (712)15.1Dynamics (713)15.1.1Compressor (713)15.1.2Gate (717)15.1.3Transient Master (721)15.1.4Limiter (723)15.1.5Maximizer (727)15.2Filtering Effects (730)15.2.1EQ (730)15.2.2Filter (733)15.2.3Cabinet (737)15.3Modulation Effects (738)15.3.1Chorus (738)15.3.2Flanger (740)15.3.3FM (742)15.3.4Freq Shifter (743)15.3.5Phaser (745)15.4Spatial and Reverb Effects (747)15.4.1Ice (747)15.4.2Metaverb (749)15.4.3Reflex (750)15.4.4Reverb (Legacy) (752)15.4.5Reverb (754)15.4.5.1Reverb Room (754)15.4.5.2Reverb Hall (757)15.4.5.3Plate Reverb (760)15.5Delays (762)15.5.1Beat Delay (762)15.5.2Grain Delay (765)15.5.3Grain Stretch (767)15.5.4Resochord (769)15.6Distortion Effects (771)15.6.1Distortion (771)15.6.2Lofi (774)15.6.3Saturator (775)15.7Perform FX (779)15.7.1Filter (780)15.7.2Flanger (782)15.7.3Burst Echo (785)15.7.4Reso Echo (787)15.7.5Ring (790)15.7.6Stutter (792)15.7.7Tremolo (795)15.7.8Scratcher (798)16Working with the Arranger (801)16.1Arranger Basics (801)16.1.1Navigating Song View (804)16.1.2Following the Playback Position in Your Project (806)16.1.3Performing with Scenes and Sections using the Pads (807)16.2Using Ideas View (811)16.2.1Scene Overview (811)16.2.2Creating Scenes (813)16.2.3Assigning and Removing Patterns (813)16.2.4Selecting Scenes (817)16.2.5Deleting Scenes (818)16.2.6Creating and Deleting Scene Banks (820)16.2.7Clearing Scenes (820)16.2.8Duplicating Scenes (821)16.2.9Reordering Scenes (822)16.2.10Making Scenes Unique (824)16.2.11Appending Scenes to Arrangement (825)16.2.12Naming Scenes (826)16.2.13Changing the Color of a Scene (827)16.3Using Song View (828)16.3.1Section Management Overview (828)16.3.2Creating Sections (833)16.3.3Assigning a Scene to a Section (834)16.3.4Selecting Sections and Section Banks (835)16.3.5Reorganizing Sections (839)16.3.6Adjusting the Length of a Section (840)16.3.6.1Adjusting the Length of a Section Using the Software (841)16.3.6.2Adjusting the Length of a Section Using the Controller (843)16.3.7Clearing a Pattern in Song View (843)16.3.8Duplicating Sections (844)16.3.8.1Making Sections Unique (845)16.3.9Removing Sections (846)16.3.10Renaming Scenes (848)16.3.11Clearing Sections (849)16.3.12Creating and Deleting Section Banks (850)16.3.13Working with Patterns in Song view (850)16.3.13.1Creating a Pattern in Song View (850)16.3.13.2Selecting a Pattern in Song View (850)16.3.13.3Clearing a Pattern in Song View (851)16.3.13.4Renaming a Pattern in Song View (851)16.3.13.5Coloring a Pattern in Song View (851)16.3.13.6Removing a Pattern in Song View (852)16.3.13.7Duplicating a Pattern in Song View (852)16.3.14Enabling Auto Length (852)16.3.15Looping (853)16.3.15.1Setting the Loop Range in the Software (854)16.4Playing with Sections (855)16.4.1Jumping to another Playback Position in Your Project (855)16.5Triggering Sections or Scenes via MIDI (856)16.6The Arrange Grid (858)16.7Quick Grid (860)17Sampling and Sample Mapping (862)17.1Opening the Sample Editor (862)17.2Recording Audio (863)17.2.1Opening the Record Page (863)17.2.2Selecting the Source and the Recording Mode (865)17.2.3Arming, Starting, and Stopping the Recording (868)17.2.5Using the Footswitch for Recording Audio (871)17.2.6Checking Your Recordings (872)17.2.7Location and Name of Your Recorded Samples (876)17.3Editing a Sample (876)17.3.1Using the Edit Page (877)17.3.2Audio Editing Functions (882)17.4Slicing a Sample (890)17.4.1Opening the Slice Page (891)17.4.2Adjusting the Slicing Settings (893)17.4.3Live Slicing (898)17.4.3.1Live Slicing Using the Controller (898)17.4.3.2Delete All Slices (899)17.4.4Manually Adjusting Your Slices (899)17.4.5Applying the Slicing (906)17.5Mapping Samples to Zones (912)17.5.1Opening the Zone Page (912)17.5.2Zone Page Overview (913)17.5.3Selecting and Managing Zones in the Zone List (915)17.5.4Selecting and Editing Zones in the Map View (920)17.5.5Editing Zones in the Sample View (924)17.5.6Adjusting the Zone Settings (927)17.5.7Adding Samples to the Sample Map (934)18Appendix: Tips for Playing Live (937)18.1Preparations (937)18.1.1Focus on the Hardware (937)18.1.2Customize the Pads of the Hardware (937)18.1.3Check Your CPU Power Before Playing (937)18.1.4Name and Color Your Groups, Patterns, Sounds and Scenes (938)18.1.5Consider Using a Limiter on Your Master (938)18.1.6Hook Up Your Other Gear and Sync It with MIDI Clock (938)18.1.7Improvise (938)18.2Basic Techniques (938)18.2.1Use Mute and Solo (938)18.2.2Use Scene Mode and Tweak the Loop Range (939)18.2.3Create Variations of Your Drum Patterns in the Step Sequencer (939)18.2.4Use Note Repeat (939)18.2.5Set Up Your Own Multi-effect Groups and Automate Them (939)18.3Special Tricks (940)18.3.1Changing Pattern Length for Variation (940)18.3.2Using Loops to Cycle Through Samples (940)18.3.3Using Loops to Cycle Through Samples (940)18.3.4Load Long Audio Files and Play with the Start Point (940)19Troubleshooting (941)19.1Knowledge Base (941)19.2Technical Support (941)19.3Registration Support (942)19.4User Forum (942)20Glossary (943)Index (951)1Welcome to MASCHINEThank you for buying MASCHINE!MASCHINE is a groove production studio that implements the familiar working style of classi-cal groove boxes along with the advantages of a computer based system. MASCHINE is ideal for making music live, as well as in the studio. It’s the hands-on aspect of a dedicated instru-ment, the MASCHINE hardware controller, united with the advanced editing features of the MASCHINE software.Creating beats is often not very intuitive with a computer, but using the MASCHINE hardware controller to do it makes it easy and fun. You can tap in freely with the pads or use Note Re-peat to jam along. Alternatively, build your beats using the step sequencer just as in classic drum machines.Patterns can be intuitively combined and rearranged on the fly to form larger ideas. You can try out several different versions of a song without ever having to stop the music.Since you can integrate it into any sequencer that supports VST, AU, or AAX plug-ins, you can reap the benefits in almost any software setup, or use it as a stand-alone application. You can sample your own material, slice loops and rearrange them easily.However, MASCHINE is a lot more than an ordinary groovebox or sampler: it comes with an inspiring 7-gigabyte library, and a sophisticated, yet easy to use tag-based Browser to give you instant access to the sounds you are looking for.What’s more, MASCHINE provides lots of options for manipulating your sounds via internal ef-fects and other sound-shaping possibilities. You can also control external MIDI hardware and 3rd-party software with the MASCHINE hardware controller, while customizing the functions of the pads, knobs and buttons according to your needs utilizing the included Controller Editor application. We hope you enjoy this fantastic instrument as much as we do. Now let’s get go-ing!—The MASCHINE team at Native Instruments.MASCHINE Documentation1.1MASCHINE DocumentationNative Instruments provide many information sources regarding MASCHINE. The main docu-ments should be read in the following sequence:1.MASCHINE Getting Started: This document provides a practical approach to MASCHINE viaa set of tutorials covering easy and more advanced tasks in order to help you familiarizeyourself with MASCHINE.2.MASCHINE Manual (this document): The MASCHINE Manual provides you with a compre-hensive description of all MASCHINE software and hardware features.Additional documentation sources provide you with details on more specific topics:▪Controller Editor Manual: Besides using your MASCHINE hardware controller together withits dedicated MASCHINE software, you can also use it as a powerful and highly versatileMIDI controller to pilot any other MIDI-capable application or device. This is made possibleby the Controller Editor software, an application that allows you to precisely define all MIDIassignments for your MASCHINE controller. The Controller Editor was installed during theMASCHINE installation procedure. For more information on this, please refer to the Con-troller Editor Manual available as a PDF file via the Help menu of Controller Editor.▪Online Support Videos: You can find a number of support videos on The Official Native In-struments Support Channel under the following URL: https:///NIsupport-EN. We recommend that you follow along with these instructions while the respective ap-plication is running on your computer.Other Online Resources:If you are experiencing problems related to your Native Instruments product that the supplied documentation does not cover, there are several ways of getting help:▪Knowledge Base▪User Forum▪Technical Support▪Registration SupportYou will find more information on these subjects in the chapter Troubleshooting.1.2Document ConventionsThis section introduces you to the signage and text highlighting used in this manual. This man-ual uses particular formatting to point out special facts and to warn you of potential issues. The icons introducing these notes let you see what kind of information is to be expected:This document uses particular formatting to point out special facts and to warn you of poten-tial issues. The icons introducing the following notes let you see what kind of information can be expected:Furthermore, the following formatting is used:▪Text appearing in (drop-down) menus (such as Open…, Save as… etc.) in the software and paths to locations on your hard disk or other storage devices is printed in italics.▪Text appearing elsewhere (labels of buttons, controls, text next to checkboxes etc.) in the software is printed in blue. Whenever you see this formatting applied, you will find the same text appearing somewhere on the screen.▪Text appearing on the displays of the controller is printed in light grey. Whenever you see this formatting applied, you will find the same text on a controller display.▪Text appearing on labels of the hardware controller is printed in orange. Whenever you see this formatting applied, you will find the same text on the controller.▪Important names and concepts are printed in bold.▪References to keys on your computer’s keyboard you’ll find put in square brackets (e.g.,“Press [Shift] + [Enter]”).►Single instructions are introduced by this play button type arrow.→Results of actions are introduced by this smaller arrow.Naming ConventionThroughout the documentation we will refer to MASCHINE controller (or just controller) as the hardware controller and MASCHINE software as the software installed on your computer.The term “effect” will sometimes be abbreviated as “FX” when referring to elements in the MA-SCHINE software and hardware. These terms have the same meaning.Button Combinations and Shortcuts on Your ControllerMost instructions will use the “+” sign to indicate buttons (or buttons and pads) that must be pressed simultaneously, starting with the button indicated first. E.g., an instruction such as:“Press SHIFT + PLAY”means:1.Press and hold SHIFT.2.While holding SHIFT, press PLAY and release it.3.Release SHIFT.Unlabeled Buttons on the ControllerThe buttons and knobs above and below the displays on your MASCHINE controller do not have labels.。
关于51精确延时及keil仿真延时时间
关于51精确延时及keil仿真延时时间
有时候需要精确的延时，比如18B20 温度传感器对时序要求非常严格，必
须精确到微秒级别
一、用NOP 函数
在keil C51 中，直接调用库函数：
#include // 声明了void _nop_(void);
_nop_(); // 产生一条NOP 指令
作用：对于延时很短的，要求在us 级的，采用“_nop_”函数，这个函数相当
汇编NOP 指令，延时几微秒。
NOP 指令为单周期指令，可由晶振频率算出延
时时间，对于12M 晶振，延时1uS。
(若为11.0592MHz，延时为12*(1/11.0592) =1.085uS)。
对于延时比较长的，要求在大于10us，采用C51 中的循环语句来
实现。
二、用for 和while 实现
在选择C51 中循环语句时，要注意以下几个问题
第一、定义的C51 中循环变量，尽量采用无符号字符型变量。
第二、在FOR 循环语句中，尽量采用变量减减来做循环。
第三、在do…while，while 语句中，循环体内变量也采用减减方法。
这因为在C51 编译器中，对不同的循环方法，采用不同的指令来完成的。
下面举例说明：
unsigned char i;
for(i=0;iunsigned char i;
for(i=255;i>0;i--);
其中，第二个循环语句C51 编译后，就用DJNZ 指令来完成，相当于如下指。
【VMware VCP510 官方中文课件】-VSICM51_M07_VMManagement
7-21
© 2012-2013 VMware Inc. 保留所有权利
动态增加虚拟磁盘的大小
增加现有虚拟磁盘文件的 大小
动态增加虚拟磁盘的大小， 例如从 2 GB 增加到 20 GB。
VMware vSphere：安装、配置和管理 – 修订版 A
7-22
© 2012-2013 VMware Inc. 保留所有权利
7-7
© 2012-2013 VMware Inc. 保留所有权利
创建模板
将虚拟机克隆为模板。 虚拟机处于开启或关闭状态均可。 将虚拟机转换为模板。 虚拟机必须处于关闭状态。
克隆模板。 先在清单中选择模板。
VMware vSphere：安装、配置和管理 – 修订版 A
7-8
© 2012-2013 VMware Inc. 保留所有权利
7-16
© 2012-2013 VMware Inc. 保留所有权利
第 2 课： 修改虚拟机
VMware vSphere：安装、配置和管理 – 修订版 A
7-17
© 2012-2013 VMware Inc. 保留所有权利
学员的学习目标
学习完本课后，您应当能够： 介绍虚拟机的设置和选项。 添加可热插拔的设备。 动态增加虚拟磁盘的大小。 向虚拟机添加原始磁盘映射 (RDM)。
7-9
© 2012-2013 VMware Inc. 保留所有权利
使用模板部署虚拟机
要部署虚拟机，必须提供虚拟机名称、清单位置、主机、数据存储和客户 操作系统自定义数据等信息。
VMware vSphere：安装、配置和管理 – 修订版 A
7-10
© 2012-2013 VMware Inc. 保留所有权利
STM32固件库使用手册的中文翻译版
因为该固件库是通用的，并且包括了所有外设的功能，所以应用程序代码的大小和执行速度可能不是最优 的。对大多数应用程序来说，用户可以直接使用之，对于那些在代码大小和执行速度方面有严格要求的应 用程序，该固件库驱动程序可以作为如何设置外设的一份参考资料，根据实际需求对其进行调整。
1.3.1 变量 ................................................................................................................................................ 28 1.3.2 布尔型 ............................................................................................................................................ 28 1.3.3 标志位状态类型 ........................................................................................................................... 29 1.3.4 功能状态类型 .............................................................................................................
微芯片MPLAB Code Configurator的Turnkey Touch库说明书
Release Notes for MPLAB® Code Configurator’sTurnkey Touch Library v1.0.01 What is MPLAB® Code Configurator’s Turnkey Touch LibraryThe Turnkey Touch Library for Microchip’s MPLAB® X Code Configurator allows for quick and easy C code driver generation for Microchip’s capacitive touch turnkey devices. The library generates the I2C host driver code that controls the CAP1xxx devices and reads out touch information.2 System Recommendations•MPLAB® X IDE 5.20 or later•XC8 compiler 2.05 or later•MCC Version 3.85.2 or later•Foundation Services v0.2.00 or later•PIC10 / PIC12 / PIC16 / PIC18 MCUs v1.80.0 or later3 Documentation Support•Touch Touch Library for MPLAB® X Code Configurator User’s Guide:https:///touch:turnkey-touch-cap1xxx-guide•AN2034 – CAP1XXX Touch Key Controller Tuning Guide•mTouch® Design Center: /design-centers/touch-input-sensing/proximity-keys-and-sliders/getting-started4 Installing MPLAB® Code Configurator’s Turnkey Touch LibraryBasic steps for installing MPLAB® Code Configurator needs to be installed as below.To install the MPLAB® Code Configurator Plugin:1. In the MPLAB® X IDE, select Plugins from the Tools menu2. Select the Available Plugins tab3. Check the box for the MPLAB® Code Configurator v3, and click on InstallTo install the Turnkey Touch Library :4. Open the MPLAB Code Configurator page: https:///mcc5. Scroll to the bottom of the page and select the Current Downloads tabs6. Download the Turnkey Touch Library (TurnkeyTouch-1.0.0.jar)7. In the MPLAB® X IDE click on Tools → Options8. Click on Plugins tab9. Click on Install Library10. Browse to the location where you saved the TurnkeyTouch-1.0.0.jar, select and click Open5 What’s New•Initial release for the Turnkey Touch Library, supporting CAP1xxx devices through I2C interface.6 Known IssuesNo known issues.7 Frequently Asked QuestionsFor frequently asked questions, please refer to the FAQ post on the MCC Forum(/forums/f293.aspx)8 Supported FamiliesThe Turnkey Touch Library supports the device families with I2C hardware module, which aresupported by PIC10/12/16/18 Library or Foundation Service Library.9 Customer Support9.1 The Microchip Web SiteMicrochip provides online support via our web site at . This web site is used as a means to make files and information easily available to customers. Accessible by using your favorite Internet browser, the web site contains the following information:•Product Support – Data sheets and errata, application notes and sample programs, design resources, user’s guides and hardware support documents, latest software releases and archived software•General Technical Support – Frequently Asked Questions (FAQs), technical support requests, online discussion groups/forums (), Microchip consultant programmember listing•Business of Microchip – Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factoryrepresentatives9.2 Additional SupportUsers of Microchip products can receive assistance through several channels:•Distributor or Representative•Local Sales Office•Field Application Engineering (FAE)•Technical SupportCustomers should contact their distributor, representative or field application engineer (FAE) forsupport. Local sales offices are also available to help customers. A listing of sales offices andlocations is available on our web site.Technical support is available through the web site at: 。
VSICM51_M12_HostScalability(vmware vsphere5.1 VCP培训教材,英文,pdf)
Use for multi–virtual machine systems where performance benefits virtual machines communicating heavily with one another. Use for multi–virtual machine systems that load-balance or require high availability.
Data Protection Access and Authentication Control Resource Management and Monitoring High Availability and Fault Tolerance Host Scalability Patch Management Installing VMware vSphere Components
VMware vSphere: Install, Configure, Manage – Revision A
12-11
© 2012 VMware Inc. All rights reserved
DRS Cluster Settings: Affinity Rules for Virtual Machines
• •
Use Intel CPUs with Core 2 micro architecture and newer Use AMD first-generation Opteron CPUs and newer
Run ESXi 3.5 Update 2 or later Be connected to vCenter Server Be enabled for hardware virtualization (AMD-V or Intel VT) Be enabled for execution-disable technology (AMD No eXecute (NX) or Intel eXecute Disable (XD)) Be configured for vMotion migration
【VMware VCP510 官方中文课件】-VSICM51_M01_CourseIntro
网络
- 增强的分布式 交换机 - 网络 I/O 控制 - SR-IOV 支持
私有云资源池
公有云
VMware vSphere：安装、配置和管理 – 修订版 A
要了解与最高配置和安装要求有关的信息，请在本网站中查看当前的 vSphere 手册。
VMware vSphere：安装、配置和管理 – 修订版 A
1-9
© 2012-2013 VMware Inc. 保留所有权利
© 2012-2013 VMware Inc. 保留所有权利
vSphere 产品文档
要查看 vSphere 产品文档，请访问：/cn/support/
support-resources/pubs/vsphere-esxi-vcenter-server-pubs
VMware vSphere：安装、配置和管理 – 修订版 A 1-7
© 2012-2013 VMware Inc. 保留所有权利
VMware 联机资源
VMware 社区： 发起讨论，并访问社区和用户组。 VMware 支持：/cn/support/ 访问知识库、文档、技术白皮书和兼容性指南。
VMware vSphere：安装、配置和管理 – 修订版 A
1-3
© 2012-2013 VMware Inc. 保留所有权利
您的位置
课程介绍 虚拟化简介 创建虚拟机 VMware vCenter Server 配置和管理虚拟网络 配置和管理 vSphere 存储 虚拟机管理
Data Protection 访问和身份验证控制 资源管理和监视 High Availability 和 Fault Tolerance 主机可扩展性 补丁程序管理 安装 VMware vSphere 组件
HP ICM SIM5.2安装手册V1
HP Insight Control Management &SIM 5.2安装手册文档修改记录注意:请在文档修改后更新本文档的日期及版本号.目录1.Insight Control Management安装要求 (4)1.1.ICM安装硬件要求 (4)1.2.ICM安装软件要求 (4)2.ICM & SIM5.2的安装过程 (5)2.1.安装前准备 (5)2.2.安装过程 (6)1. Insight Control Management安装要求1.1. ICM安装硬件要求1.2. ICM安装软件要求2. ICM & SIM5.2的安装过程2.1. 安装前准备自动运行 Insight Control Management（ICM）DVD光盘，选择Install界面中的第一项“Run Insight Control Advisor”，运行安装环境的检测，查看安装ICM&SIM5.2所需的环境和组件是否准备妥当（注：其中的IIS和FTP service是安装Rapid Deployment Pack（RDP）所必需的，如果用户不打算安装RDP，则可以不需要这两个组件）。
过程如下：2.2. 安装过程ICM&SIM5.2有多种的安装方式供用户选择，用户通常可以选择只安装单个产品或组件（例如只安装SIM5.2），或选择安装整个ICM套装产品。
安装单个产品或组件可以在“Products”分页面中来选择，如下图：当然，用户也可以选择安装整个ICM套装产品，在“Install”页面中集中化进行安装。
下面就以安装ICM套装产品为例，来介绍ICM&SIM5.2的安装过程：1、在“Install”页面中，选择第三项“Run Integrated Installer”。
2、用户可以在接下来的安装页面中选择管理套件的典型安装或自定义安装，典型安装会自动将相应管理套件所包括的组件全部安装，并安装在默认的C盘中。
keil 生成的lib无声明函数
一、问题背景在使用Keil嵌入式开发环境时，我们常常会遇到Keil生成的库文件中包含了一些未声明的函数的情况。
这会导致在信息时出现"undefined reference"的错误，从而影响程序的正常运行。
这些未声明的函数往往是由于Keil库生成工具的一些问题所导致，需要我们在使用时进行额外的处理和修复。
二、问题分析Keil生成的库文件通常是供我们在开发嵌入式系统时使用的，它们包含了一些常用的函数和驱动程序，可以帮助我们快速地开发和部署程序。
然而，有时候我们会发现在使用这些库文件时，出现了一些未声明函数的问题。
这些未声明的函数往往是由于Keil生成工具的一些问题所导致的，可能是由于一些编译选项的设置不正确，或是由于库文件的版本不兼容等原因。
三、解决方法针对Keil生成的库文件中出现的未声明函数的问题，我们可以采取以下几种方法来解决：1. 检查编译选项我们需要仔细检查Keil工程的编译选项，确保编译选项中包含了库文件的路径，并且正确地信息了所需的库文件。
有时候，由于编译选项的设置不正确，导致了未声明函数的问题。
2. 更新库文件版本如果我们使用的是老版本的Keil库文件，可能会存在一些bug或者不兼容的问题。
我们可以尝试更新到最新版本的Keil库文件，看是否能够解决未声明函数的问题。
3. 手动声明函数如果以上两种方法都无法解决问题，那么我们可以考虑手动声明未声明的函数。
在我们的程序中，我们可以手动地添加对未声明函数的声明，从而避免信息时出现"undefined reference"的错误。
四、总结在使用Keil生成的库文件时，出现未声明函数的问题是比较常见的。
这些问题往往是由于编译选项设置不当或者库文件版本的不兼容所导致的。
针对这些问题，我们可以通过检查编译选项、更新库文件版本或者手动声明函数来解决。
希望以上方法能够帮助到大家解决在使用Keil库文件时遇到的未声明函数的问题。
【VMware VCP510 官方中文课件】-VSICM51_M03_VirtualMachines
通用 SCSI 设备（例如磁带库）： 可与附加的 SCSI 适配器相连
NVIDIA GPU (VMware® View™) 通过 View 使用硬件加速图形
VMware vSphere：安装、配置和管理 – 修订版 A
3-15
© 2012-2013 VMware Inc. 保留所有权利
虚拟机控制台
创建虚拟机
第 3 单元
© 2012-2013 VMware Inc. 保留所有权利
您的位置
课程介绍 虚拟化简介 创建虚拟机 VMware vCenter Server 配置和管理虚拟网络 配置和管理 vSphere 存储 虚拟机管理
Data Protection 访问和身份验证控制 资源管理和监视 High Availability 和 Fault Tolerance 主机可扩展性 补丁程序管理 安装 VMware vSphere 组件
尽可能选用 vmxnet3。
VMware vSphere：安装、配置和管理 – 修订版 A
3-14
© 2012-2013 VMware Inc. 保留所有权利
其他设备
CD/DVD 驱动器：
连接 CD-ROM、DVD 或 ISO 映像。
USB 3.0： 智能卡读卡器
软盘驱动器： 连接软盘或软盘映像。
虚拟机 文件夹
日志文件
模板文件 原始设备映射文件 磁盘描述符文件
(vmware.log)
（<虚拟机名称>.vmtx） （<虚拟机名称>-rdm.vmdk） （<虚拟机名称>.vmdk）
磁盘数据文件
挂起状态文件 快照数据文件 快照状态文件 快照磁盘文件
三模式探头系列P7500系列数据表P7516（含可选功能P75PDPM）特点与优势说明书
TriMode™Probe FamilyP7500SeriesDatasheetP7516with optional P75PDPMFeatures &Bene fitsTriMode™Probe –One Setup,Three Measurements without Adjusting Probe Tip Connections Differential Single EndedCommon Mode (Requires only one probe vs.conventional probing techniques)Signal Fidelity25GHz P7520A (with P75PST tip)20GHz P7520A 16GHz P751613GHz P7513A 8GHz P75086GHz P75064GHz P7504Versatile Connectivity –Solder Down,Handheld,Fixtured Variety of Solder-down Options TriMode™Solder TipsSmall Form Factor for High-density Probing Bandwidth Choices from 4to 25GHz1.5m Extension Cable for High-temperature Probing Quickly and Reliably Connect to Multiple Probe TipsPrecision Differential Probing Module –Optional Handheld and Fixtured ProbingSmall Precision Tapered Tips,an Articulated Joint for Compliance,and Variable Tip Spacing TekConnect ®Interface –TekConnect Scope/Probe Control and UsabilityDirect Control from Probe Compensation Box or from Scope Menu Automated Measurement Control through the TekConnect ®Interface to Connect to Tektronix Real-time OscilloscopesView TriMode/Attentuation Settings on Probe Compensation Box from Top or End PanelApplicationsExamples Include,but are Not Limited To:PCI Express 3.0,Serial ATA III,DDR2/3/4,QPI,XAUI1981DatasheetBefore TriMode:1Probe for Differential;2Probes for SE and Common Mode;or 1Probe Soldered and Resoldered 3times;2Probes for Common Mode.TriMode™Probing,Connectivity,and PerformanceTriMode™Probing ArchitectureOne-probe setup makes differential,single ended,and common mode measurements accurately and de finitively.Tektronix is a known leader when it comes to signal fidelity and signalacquisition.Building on our history of market-leading innovations inprobing,After TriMode (P75TLRST):1Probe for Differential,Single Ended,and Common Mode,with only 1setup required.we invented a revolutionary probing architecture called “TriMode™Probing”that de fines the next-generation industry benchmark for usability and signal fidelity.This architecture changes the rules of probing and allows you to work more effectively and ef ficiently.By enabling unique functionality,the P7500Series TriMode probes allow you to switch between differential,single ended,and common mode measurements without moving the probe from its connection points.Improved productivity is achieved by reducing setup time.One setup can be used to make the three different types of measurements all with the press of a button.The TriMode Probe architecture for the P7500Series probes continues the Tektronix tradition of high-bandwidth and low-DUT loading while providing improved connectivity and value.2TriMode™Probe Family —P7500SeriesConnectivity Plus –Solder Down –Handheld –FixturedThe P7500Series TriMode probe architecture offers various levels of connectivity and provides the highest probe fidelity available for real-time oscilloscopes.The multipoint connectivity solutions of the P7500Series include:TriMode Performance Solder Tip The highest-performance solder tip.Up to 25GHzbandwidth.TriMode Long-reach Solder Tip A high performance solder tip with a long reach and very small,low-pro file form factor.Up to 20GHzbandwidth.TriMode Resistor Solder Tip High-performance solder tip with easy-to-solder tip resistors.Up to 18GHzbandwidth.TriMode Extended-resistor Solder Tip Medium-performance solder tip with long easy-to-solder tip resistors.Up to 7GHzbandwidth.3DatasheetTriMode Micro-coax Tip Low-cost,quick-connect solder tips.Up to 4GHzbandwidth.TriMode High-temperature Tip When used with the 1.5m Socket Cable XL,this tip can be used in environments from –55°C to 150°C.Up to 10GHz bandwidth withDSP.Damped Wire Tip Low-cost solder tips ideal for high-density probing.Up to 8GHzbandwidth.Precision Differential Probing Module High-performance handheld probing module.Up to 18GHzbandwidth.Handheld and fixtured probing needs are met using the optional Precision Differential Probing Module (P75PDPM).Its small precision tapered tips,variable articulation of the probe tip,and quick-adjusting variable tip spacing provides the needed flexibility for adapting to vias and other test points of differing sizes from 30mils to 180mils.These precision connectivity tools enable you to access multiple signals on anything from convenient test pads to hard-to-reach,high-density circuitry.4TriMode™Probe Family —P7500SeriesSignal FidelityYou can be con fident in the signal fidelity of your measurements.The innovative new Tektronix differential architecture,coupled with the superior electrical performance of IBM SiGe Technology,provides the bandwidth and fidelity to meet the industry needs of today as well as tomorrow.The P7500Series Probe Architecture provides:Highest bandwidth available –25GHz Excellent step response Low-DUT loading High CMRRDifferential,single ended,or common mode measurements using one probePerformance You Can Count OnDepend on Tektronix to provide you with performance you can count on.In addition to industry-leading service and support,this product comes backed by a one-year warranty as standard.CharacteristicsP7500with P75PDPMTriMode Probe ArchitectureP7520AP7516P7513A P7508P7506P7504Bandwidth (Typical,Probe Only)>20GHz,A-B mode >18GHz,P75PDM,other modes >16GHz >13GHz >8GHz >6GHz >4GHz Rise Time (10-90%)(Typical,Probe Only)<27ps,A-B mode <29ps,other modes <32ps <40ps <55ps <75ps <105ps Rise Time (20-80%)(Typical,Probe Only)<18ps,A-B mode <20ps,other modes<24ps <28ps <35ps <50ps <70ps Attenuation(User Selectable)5X or 12.5X 5X or 12.5X 5X or 12.5X 5X or 12.5X 5X or 12.5X 5X or 12.5X Differential Input Range ±0.625V (5X)±1.6V (12.5X)±0.75V (5X)±1.75V (12.5X)±0.75V (5X)±1.75V (12.5X)±0.75V (5X)±1.75V (12.5X)±0.75V (5X)±1.75V (12.5X)±0.75V (5X)±1.75V (12.5X)Operating Voltage Window+3.7to –2.0V +4.0to –2.0V +4.0to –2.0V +4.0to –2.0V +4.0to –2.0V +4.0to –2.0V Offset Voltage Range+2.5to –1.5V,A-B mode +3.4to –1.8V,other modes +2.5to –1.5V,A-B mode +3.4to –1.8V,other modes +2.5to –1.5V,A-B mode +3.4to –1.8V,other modes +2.5to –1.5V,A-B mode +3.4to –1.8V,other modes +2.5to –1.5V,A-B mode +3.4to –1.8V,other modes +2.5to –1.5V,A-B mode +3.4to –1.8V,other modes DC Input Resistance (Differential)100k ohms 100k ohms 100k ohms 100k ohms 100k ohms 100k ohms Noise<33nV /√Hz (5X)<48nV /√Hz (12.5X)<33nV /√Hz (5X)<48nV /√Hz (12.5X)<33nV /√Hz (5X)<48nV /√Hz (12.5X)<33nV /√Hz (5X)<48nV /√Hz (12.5X)<33nV /√Hz (5X)<48nV /√Hz (12.5X)<33nV /√Hz (5X)<48nV /√Hz (12.5X)CMRR(Differential Mode)>60dB at DC >40dB at 50MHz >30dB at 1GHz >20dB at 10GHz >12dB at 20GHz>60dB at DC >40dB at 50MHz >30dB to 1GHz >20dB to 8GHz >15dB to 16GHz>60dB at DC >40dB at 50MHz >30dB to 1GHz >20dB to 7GHz >15dB to 13GHz>60dB at DC >40dB at 50MHz >30dB at 1GHz >25dB at 4GHz >20dB at 8GHz>60dB at DC >40dB at 50MHz >30dB at 1GHz >25dB at 3GHz >20dB at 6GHz>60dB at DC >40dB at 50MHz >30dB at 1GHz >28dB at 2GHz >25dB at 4GHzNondestructive Input Range ±15V ±15V ±15V ±15V ±15V ±15V Interface TekConnect™TekConnect™TekConnect™TekConnect™TekConnect™TekConnect™Cable Length1meter1meter1.3meters1.3meters1.3meters1.3metersFor additional characteristics,refer to the individual probe Technical Reference Manuals.5DatasheetTypical System Speci ficationsThe typical system speci fications in the table below are achieved using a P7520A probe with a DPO/DSA72504D or DPO/DSA73304D Oscilloscope and a P75PST solder tip.CharacteristicA-B ModeAll Other ModesSystem Bandwidth25GHz >18GHz System Rise Time (10%–90%)<20ps <29ps System Rise Time (20%–80%)<14ps<20psMinimum System Requirements /Instrument CompatibilityP7500Series TriMode Differential Probes are compatible with the DPO/DSA/MSO70000and TDS6000B/C Series TekConnect Oscilloscopes.The chart below shows recommended probe/oscilloscope model combinations.InstrumentBW (Scope)FW VersionRecommended ProbeDPO/DSA73304D 33GHz V6.4.1or higher P7520A DPO/DSA72504D 25GHz V6.4.1or higher P7520A DPO/DSA7200420GHz V3.0or higher P7520A DPO/DSA7160416GHz V3.0or higher P7516DPO/DSA7125412.5GHz V3.0or higher P7513A DPO/DSA708048GHz V3.0or higher P7508DPO/DSA706046GHz V3.0or higher P7506DPO/DSA704044GHzV3.0or higher P7504TDS6000C 12.5GHz,15GHz V5.1.7P7516,P7513A TDS6000B8GHz,6GHzV5.1.3P7508,P750680A03TekConnect Probe Interface V2.3All P7500Series probes RTPA2A TekConnect Probe InterfaceV2.3All P7500Series probesOrdering InformationP7520A TriMode™Differential Probe,20GHz,for TekConnect Interface Oscilloscopes.P7516TriMode™Differential Probe,16GHz,for TekConnect Interface Oscilloscopes.P7513A TriMode™Differential Probe,13GHz,for TekConnect Interface Oscilloscopes.P7508TriMode™Differential Probe,8GHz,for TekConnect Interface Oscilloscopes.P7506TriMode™Differential Probe,6GHz,for TekConnect Interface Oscilloscopes.P7504TriMode™Differential Probe,4GHz,for TekConnect Interface Oscilloscopes.All Include :One-year warranty,plus see Standard Accessories table.Service OptionsOptionDescriptonCA1Single Calibration or Functional Veri fication C3Calibration Service 3Years C5Calibration Service 5YearsD3Calibration Data Report 3Years (with Option C3)D5Calibration Data Report 5Years (with Option C5)G3Complete Care 3Years (includes loaner,scheduled calibration and more)G5Complete Care 5Years (includes loaner,scheduled calibration and more)R3Repair Service 3Years R5Repair Service 5YearsAdditional Service Products Available During Warranty (DW)R3PDW Repair service coverage 3years (includes product warranty period).3-year period starts at time of customer instrument purchaseR5PDWRepair service coverage 5years (includes product warranty period).5-year period starts at time of customer instrument purchase6TriMode™Probe Family —P7500SeriesStandard AccessoriesDescriptionP7520A/P7516P7513A/P7508P7506/P7504Reorder Part Number020-2790-xx(P7516/P7513A/P7508)020-2977-xx (P7506/P7504)The documentation kit contains:Printed Quick Start User Manuals,CD-ROM contains PDFs of basic probe and measurement literature,and the probe manuals (Quick Start User Manual and Technical Reference Manual)1each *11each 1each071-3048-xx (P7520A)Antistatic Wrist Strap1each 006-3415-xx Certi ficate of Traceable Calibration1each 1each 1each Standard with probe Data Calibration Report:Lists themanufacturing test results of your probe at the time of shipment and is included with every probe1each 1each 1eachStandard with probeDC Probe Calibration Fixture1each 067-1821-xx DC Probe Calibration Fixture1each 1each 067-1967-xx 50ΩCoax Cable –Male BNC to Male BNC1each 1each 1each 012-0208-xx 50ΩCoax Cable –Male SMA to Male SMA1each 1each 1each174-1120-xx Solder Tip Ramps (25each)1each (P7520A only)020-3118-xx P7520A/P7516/P7513A/P7508Accessory Box (See contents listing below 1through 7)1)TriMode Long-reach Solder Tip2each 2eachP75TLRST 2)G3PO Bullet Kit (includes 4bullets)1each 013-0359-xx 3)G3PO Bullet Removal Tool1each 003-1896-xx 4)Solder Kit:Solder Spool,Wire Spool1each 1each 020-2754-xx 5)Tape,Adhesive (Strip,10each)1each 1each 006-8237-xx 6)Marker Band Set (2each of 5colors)1each 1each 016-0633-xx 7)Socket Cable1each020-2954-xxP7506/P7504Accessory Box (See contents listing below 1through 6)1)Socket Cable1each 020-2954-xx 2)TriMode Micro-coax Tip4each 020-2955-xx 3)TriMode High-temperature Tip2each 020-2958-xx 4)Solder Kit:Solder Spool,Wire Spool 1each 020-2754-xx 5)Tape,Adhesive (Strip,10each)1each 006-8237-xx 6)Marker Band Set (2each of 5colors)1each016-0633-xx*1P7520A documentation is a printed instruction manual.7DatasheetContact Tektronix:ASEAN /Australasia (65)63563900Austria 0080022554835*Balkans,Israel,South Africa and other ISE Countries +41526753777Belgium 0080022554835*Brazil +55(11)37597627Canada 180********Central East Europe and the Baltics +41526753777Central Europe &Greece +41526753777Denmark +4580881401Finland +41526753777France 0080022554835*Germany 0080022554835*Hong Kong 4008205835India 0008006501835Italy 0080022554835*Japan 81(3)67143010Luxembourg +41526753777Mexico,Central/South America &Caribbean 52(55)56045090Middle East,Asia,and North Africa +41526753777The Netherlands 0080022554835*Norway 80016098People’s Republic of China 4008205835Poland +41526753777Portugal 800812370Republic of Korea 00180082552835Russia &CIS +7(495)7484900South Africa +41526753777Spain 0080022554835*Sweden 0080022554835*Switzerland 0080022554835*Taiwan 886(2)27229622United Kingdom &Ireland 0080022554835*USA 180*********European toll-free number.If not accessible,call:+41526753777Updated 10February 2011For Further Information.Tektronix maintains a comprehensive,constantly expanding collection of application notes,technical briefs and other resources to help engineers working on the cutting edge of technology.Please visit Copyright ©Tektronix,Inc.All rights reserved.Tektronix products are covered by U.S.and foreign patents,issued and rmation in this publication supersedes that in all previously published material.Speci fication and price change privileges reserved.TEKTRONIX and TEK are registered trademarks of Tektronix,Inc.All other trade names referenced are the service marks,trademarks,or registered trademarks of their respective companies.17Aug 201251W-20271-13Optional Tip AccessoriesDescriptionPart NumberTriMode Performance Solder TipP75PST P7500Series Precision Differential Probing ModuleP7500Precision Differential Probing Module Accessory Kit (See 1through 7below)P75PDPM 1)Tip Cable (1ps matched pair,1each)P75TC 2)Probing Module TipProbe Tips Replacement Kit 1Each (Right and left side)P75PMT 3)Accessory Kit;Ground Spring,Large 4Each 016-1998-xx 4)Accessory Kit;Ground Spring,Small 4Each 016-1999-xx 5)Handle,Adapter (Probing Module)367-0545-xx 6)G3PO Separator Tool 003-1897-xx 7)Ground Spring Tool 003-1900-xx TriMode Resistor Solder Tip020-2936-xx TriMode Extended-resistor Solder Tip 020-2944-xx Resistor Replacement Kit 020-2937-xx Solder Tip Ramps,25Each 020-3118-xx Socket Cable 020-2954-xx Socket Cable,XL020-2960-xx TriMode High-temperature Tip 020-2958-xx TriMode Micro-coax Tip 020-2955-xx Damped Wire Tip020-2959-xx Nexus Interposer DDR Solder Tip 020-3022-xx Deskew Fixture 067-1586-xx Probe PositionerPPM100Precision,3Position,Probe Positioner PPM203B 8200Series TekConnect ®Probe Interface 80A03(FW Version ≥2.3)RTSA Series TekConnect ®Probe InterfaceRTPA2A(FW Version ≥2.3)Tektronix is registered to ISO 9001and ISO 14001by SRI Quality SystemRegistrar.Product(s)complies with IEEE Standard 488.1-1987,RS-232-C,and with Tektronix Standard Codes and Formats.。
vs2021 打开emwin pc仿真出错
vs2021 打开emwin pc仿真出错vs2021打开emwinpc仿真出错vs2021打开emwinpc仿真出错问题：errorlnk2001:无法解析的外部符号_memset1>gui.lib(guidev_usagebm.obj):errorlnk2001:无法解析的外部符号_memset1>gui.lib(listview_getitemtext.obj):errorlnk2001:无法解析的外部符号_memset1>guidemo_colorbar.obj:errorlnk2001:无法解析的外部符号_memset1>guidemo_speed.obj:errorlnk2001:无法解析的外部符号_memset1>libcmt.lib(utility_desktop.obj):errorlnk2001:无法解析的外部符号_memset1>gui.lib(guidrv_win32.obj):errorlnk2001:无法解析的外部符号_memset1>guidemo_intro.obj:errorlnk2021:无法解析的外部符号_strcat，该符号在函数_guidemo_intro中被引用1>guidemo_skinning.obj:errorlnk2001:无法解析的外部符号_strcat1>guidemo_listview.obj:errorlnk2021:无法解析的外部符号_rand，该符号在函数__addrow中被引用1>guidemo_speed.obj:errorlnk2001:无法解析的外部符号_rand1>gui.lib(listbox.obj):errorlnk2001:无法解析的外部符号_strcpy1>gui.lib(listbox_addstringh.obj):errorlnk2001:无法解析的外部符号_strcpy1>gui.lib(treeview.obj):errorlnk2001:无法解析的外部符号_strcpy1>gui.lib(gui__settext.obj):errorlnk2001:无法解析的外部符号_strcpy1>gui.lib(header.obj):errorlnk2001:无法解析的外部符号_strcpy1>gui.lib(dropdown.obj):errorlnk2001:无法解析的外部符号_strcpy1>gui.lib(listview.obj):errorlnk2001:无法解析的外部符号_strcpy1>gui.lib(listview_insertrow.obj):errorlnk2001:无法解析的外部符号_strcp解决方案：5.30版本就是由于emwin的编程条件就是vs2021条件下的平台工具集，在vs2021版本下平台工具集不相匹配，所以1.在属性中挑选设置，2.在平台工具集中选择visualstudio2021(v120)特别注意无法挑选visualstudio2021(v140),，如果挑选不好用，编程不通过。
MON51仿真软件在MSC121X单片机上的应用
产品与应用年第5期MON51仿真软件在MSC121X 单片机上的应用武晓磊1王峰2韩伟1（1.中北大学信息与通信工程学院，太原030051；2.昆山市鹿通路桥工程有限公司，江苏苏州215300）摘要给出了使用Keil Monitor-51仿真软件，在MSC1210/11EVM （评估板）上，进行MSC121X 系列单片机开发、调试、仿真的方法。
关键词：MON51；MSC1210；数据采集；仿真软件Using Keil MON51Simulation Software for Debugging the MSC121X FamilyWu Xiaolei 1Wang feng 2Han W ei 1（1.School of Information and Comunication Engineering,North University of China,Taiyuan 030051；2.Kunshan Lutong Road and Bridge Engineering Co.,Ltd,Suzhou,Jiangsu 215300）Abstr act This paper presented a simulating solution which is using a kind of simulation software –Keil Monitor-51and MSC1210/11EVM (Evaluation Board)，for developing ，debugging and simulating the MSC121X Family.Key words ：MON51；MSC1210；data acquisition ；simulating software1引言针对MSC121X 系列芯片，德国Keil 软件公司提供两种调试工具，MON51和ISD51。
ISD51可以在所有MSC121X 芯片上使用。
corosync+pacemaker安装配置实验全文
可编辑修改精选全文完整版
Corosync安装测试
一、实验要求
1、corosync + pacemaker集群安装测试
二、架构拓扑
网络要求：所有服务器位于同一VLan机器无特殊要求。
三、系统环境
1、操作系统：CentOS 6.6
2、相关软件：corosync、pacemaker、pcs
3、网络要求：/etc/hosts文件添加双方主机名列表。
四、地址规划
五、安装软件
1、安装支持软件
2.1、创建所需的用户和组
2.2、编译安装corosync、pacemaker、pcs软件，使用默认路径安装。
# 推荐使用yum安装corosync + pacemaker
2.3、拷贝配置文件、启动脚本
2.4启动软件
六、软件配置
1、主配置文件（/etc/corosync/corosync.conf）：
2、配置群集主机间SSH信任连接
3、配置群集Configure Corosync
4、因没有 Fencing设备，禁用STONITH 组件功能
5、二个节点时，禁用quorum策略功能
6、pcsd 相关配置（/usr/lib/pcsd/）
七、测试
1、可以使用命令查看日志文件：
2、可以使用corosync-cfgtool命令查看群集：
3、可以使用pacemakerd -F命令查看安装组件：
附：错误处理
A、软件编译时错误解决办法：
2、软件运行时错误处理。
RTOS-CMX Technical Information ClaraDebug中文版说明书
R TO S -C M XT e c h n i c a l I n f o r m a t i o n13.03.19RTOS-CMXRTOS Debugger for CMX■Improved support for the CMX debugger CMXBug■Real time, non-intrusive display of CMX system resources■CMX specific display of analyzer listing■Statistic evaluation and graphic display of task run times■Task related evaluation of function run times ■Statistic evaluation and graphic display of task states■Task stack coverage■PRACTICE functions for OS data ■CMX related pull-down menuThe TRACE32 System includes a configurable multitask debugger to provide symbolic debugging in real time oper-ating systems. Our software package contains a ready-to-run configuration for the CMX Real Time Kernel from CMX Company.In close cooperation with CMX Company we built a spe-cial multitask support for CMX on Infineon C166/167 con-trollers, 8051 Derivates, Renesas controllers and Z80based microcontrollers. This leaflet will guide you through the additional implemented features in TRACE32, to do an effective debugging on CMX systems.H8SMultitask Debugging on TRACE32 with CMX-TINY+Real time, non-intrusive display of CMX-TINY+ system resourcesThe TRACE32 multitask debugger for CMX-TINY+ provides display functions for all CMX-TINY+ resources. The sys-tem resources tasks, cyclic timers, resources and mailboxes can be dis-played. In addition, by using the emula-tors dual-port memory, the display of all these regions can be viewed non-intru-sively in real time. The tables are updated permanently (“On The Fly”),without affecting the application at all.Task list window, cyclic timers and a detailed mailbox windowCMX-TINY+ specific display of analyzer listingThe data recorded in the analyzer can be displayed and interpreted specific to the operating system.The task switches can be displayed symbolically.Statistic evaluation and graphic display of task run timesThe analyzer can calculate statistic tables of task run times and task switches. A graphical diagram showswhich task was active at a specific time, giving a clear view of the behav-iour of the system.Task related evaluation of function run timesThe statistic and graphic evaluation of function calls and function run timescan be done dependant to the actualAnalyzer listing, display of task switches and source linesStatistics and flow of tasksrunning task. This is necessary, if dif-ferent tasks call one single function at the same time, or if a task switch occurs in between the function.Statistic evaluation and graphic display of task statesThese tabular and graphical analyses of the status of tasks show the various states (i.e. running, ready, waiting, sus-pended and undefined) and times eachtask spent in each state. A graphical view of the data can help to highlight prioritisation problems, critical pathsetc.Statistics and flow of task dependent funtion run timesStatistics and flow of task statesTask Stack CoverageIn real time systems it is quite impor-tant to know, how much stack space each task consumes. For this purposea special window shows the current and the maximum usage of each seperate task.PRACTICE functions for OS data.The support includes extended PRAC-TICE functions for CMX-TINY+ specific data. E.g. the function “TASK.CONFIG(magic)” returns the address of the so called magic value, which corresponds to the id of the current executed task.CMX-TINY+ related pull-down menuBecause the menu bar of theTRACE32 user interface can be fully customized, you can create a new pull down menu, including operating sys-tem specific commands. We deliverCMX-TINY+ support with an example for such specific menues, which pro-vides fast access to the CMX-TINY+features.Task stack coverage windowTRACE32 with CMX-TINY menuContactInternational RepresentativeArgentinaAnacom Eletronica Ltda.Mr. Rafael SoriceRua Nazareth, 807, BarcelonaBR-09551-200 São Caetano do Sul, SP Phone: +55 11 3422 4200FAX: +55 11 3422 4242EMAIL:******************.br AustraliaEmbedded Logic Solutions P/LMr. Ramzi KattanSuite 2, Level 3144 Marsden StreetParramatta NSW 2150Phone: +61 2 9687 1880FAX: +61 2 9687 1881EMAIL:*****************.au AustriaLauterbach GmbHAltlaufstr. 40D-85635 Höhenkirchen-Siegertsbrunn Phone: +49 8102 9876 190FAX: +49 8102 9876 187EMAIL:******************** BelgiumTritec Benelux B.V.Mr. Robbert de VoogtStationspark 550NL-3364 DA SliedrechtPhone: +31 184 41 41 31FAX: +31 184 42 36 11EMAIL:******************BrazilAnacom Eletronica Ltda.Mr. Rafael SoriceRua Nazareth, 807, BarcelonaBR-09551-200 São Caetano do Sul, SP Phone: +55 11 3422 4200FAX: +55 11 3422 4242EMAIL:******************.br CanadaLauterbach Inc.Mr. Udo Zoettler4 Mount Royal Ave.USA-Marlborough, MA 01752 Phone: +1 508 303 6812FAX: +1 508 303 6813EMAIL:********************** China BeijingLauterbach Technologies Co., LtdMr. Linglin HeBeijing OfficeA3,South Lishi Road, XiCheng District Beijing 100037, P.R. ChinaPhone: +86 10 68023502FAX: +86 10 68023523EMAIL:************************* China ShenzhenLauterbach Technologies Co., Ltd1406/E Xihaimingzhu BuildingNo.1 Taoyuan Road, Nanshan District Shenzhen 518052, P.R. China Phone: +86 755 8621 0671FAX: +86 755 8621 0675EMAIL:**************************China SuzhouLauterbach Technologies Co., Ltd Mr. Linglin HeHengyu Square, Rm 709No. 188, Xing Hai StreetSuzhou, 215021 P.R. of China Phone: +86 512 6265 8030FAX: +86 512 6265 8032EMAIL:********************** Czech. RepublicLauterbach GmbHAltlaufstr. 40D-85635 Höhenkirchen-Siegertsbrunn Phone: +49 8102 9876 130FAX: +49 8102 9876 187EMAIL:******************** DenmarkNohau Danmark A/SMr. Flemming JensenHørkær 26, Plan 4DK-2730 HerlevPhone: +45 44 52 16 50FAX: +45 44 52 26 55EMAIL:*************EgyptLauterbach GmbHAltlaufstr. 40D-85635 Höhenkirchen-Siegertsbrunn Phone: +49 8102 9876 130FAX: +49 8102 9876 187EMAIL:******************** FinlandNohau Solutions FinlandMr. Martti ViljainenTekniikantie 14FI-02150 EspooPhone: +358 40 546 0142FAX: +358 9 2517 8101EMAIL:**************FranceLauterbach S.A.R.L.Mr. Jean-Pierre ParadisoEuroparc - Le Hameau B135 Chemin Des BassinsF-94035 Créteil CedexPhone: +33 1 49 56 20 30FAX: +33 1 49 56 20 39EMAIL:********************** GermanyLauterbach GmbHSales Team GermanyAltlaufstr. 40D-85635 Höhenkirchen-Siegertsbrunn Phone: +49 8102 9876 190FAX: +49 8102 9876 187EMAIL:******************** GreeceLauterbach GmbHAltlaufstr. 40D-85635 Höhenkirchen-Siegertsbrunn Phone: +49 8102 9876 190FAX: +49 8102 9876 187EMAIL:******************** HungaryLauterbach GmbHAltlaufstr. 40D-85635 Höhenkirchen-Siegertsbrunn Phone: +49 8102 9876 190FAX: +49 8102 9876 187EMAIL:********************India-BangaloreElectro Systems Associates Pvt. Ltd. Mr. G. V. GurunathamS-606, World Trade CenterMalleswaram West, No.26/1, Dr. Rajkumar RoadIndia - Bangalore 560055Phone: +91 80 67648888FAX: +91 80 23475615EMAIL:************************* India-ChennaiElectro Systems Associates Pvt. Ltd. Mr. D. KannanNo.109 /59A , Ground FloorIV Avenue, Ashok NagarIndia - Chennai - 600 083 Tamilnadu Phone: +91 044-24715750FAX: ++91 44 24715750EMAIL:********************India-DelhiElectro Systems Associates Pvt. Ltd. Mr. R.K. BhandariNo. 705, 7th Floor, Laxmi Deep ShivajinagarIndia - Delhi - 110 092Phone: +91 11-22549351FAX:EMAIL:******************India-HyderabadElectro Systems Associates Pvt. Ltd. Mr. C.V.M. Sri Ram MurthyShop No. 14, "Global Enclave" Bhagyanagar Colony, Kukat pallyIndia - Hyderabad 500 072Phone: +91 40-23063346FAX: +91 40-23063346EMAIL:**********************India-KolkataElectro Systems Associates Pvt. Ltd. Mr. Arun RoyIndia - KolkataPhone: +91 98305 78843FAX:EMAIL:********************India-PuneElectro Systems Associates Pvt. Ltd. Mr. R K BhandariShriram Complex,1126/1, Model Colony ShivajinagarIndia - Pune - 411 016Phone: +91 20 - 30462035 / 25663FAX: +91 20-25677202EMAIL:*****************IrelandLauterbach Ltd.Mr. Richard Copeman11 Basepoint Enterprise Centre Stroudley RoadBasingstoke, Hants RG24 8UPPhone: 0044-118 328 3334FAX:EMAIL:**********************IsraelItec Ltd.Mr. Mauri GottliebP.O.Box 10002IL-Tel Aviv 61100Phone: +972 3 6491202FAX: +972 3 6497661EMAIL:***************.ilItalyLauterbach SrlMr. Maurizio MenegottoVia Enzo Ferrieri 12I-20153 MilanoPhone: +39 02 45490282FAX: +39 02 45490428EMAIL:**********************JapanLauterbach Japan, Ltd.Mr. Kenji Furukawa3-8-8 ShinyokohamaKouhoku-ku, Nisso 16th BuildingY okohama-shi, Japan 222-0033 Phone: +81 45 477 4511FAX: +81 45 477 4519EMAIL:******************.jp LuxembourgTritec Benelux B.V.Mr. Robbert de VoogtStationspark 550NL-3364 DA SliedrechtPhone: +31 184 41 41 31FAX: +31 184 42 36 11EMAIL:****************** MalaysiaFlash TechnologyMr. Teo Kian HockNo 61, # 04-15 Kaki Bukit Av 1Shun Li Industrial ParkSGP-Singapore 417943Phone: +65 6749 6168FAX: +65 6749 6138EMAIL:*******************.sg MexicoLauterbach Inc.Mr. Udo Zoettler4 Mount Royal Ave.USA-Marlborough, MA 01752 Phone: +1 508 303 6812FAX: +1 508 303 6813EMAIL:********************** NetherlandsTritec Benelux B.V.Mr. Robbert de VoogtStationspark 550NL-3364 DA SliedrechtPhone: +31 184 41 41 31FAX: +31 184 42 36 11EMAIL:******************New ZealandEmbedded Logic Solutions P/LMr. Ramzi KattanSuite 2, Level 3144 Marsden StreetParramatta NSW 2150Phone: +61 2 9687 1880FAX: +61 2 9687 1881EMAIL:*****************.au NorwayNohau Solutions ABMr. Jörgen NilssonDerbyvägen 6DSE-21235 MalmoePhone: +46 40 592 206FAX: +46-40 592 229EMAIL:*********************** PolandQUANTUM Sp. z o.o.Mr. Aleksander Bilul. Jeleniogorska 654-056 WroclawPhone: +48 71 362 6356FAX: +48 71 362 6357EMAIL:****************.pl PortugalCaptura Electronica,SCCLMr. Juan Martinezc/Duero, 40E-08031 BarcelonaPhone: +34 93 429 5730FAX: +34 93 407 0778EMAIL:******************* RomaniaLauterbach GmbHAltlaufstr. 40D-85635 Höhenkirchen-Siegertsbrunn Phone: +49 8102 9876 130FAX: +49 8102 9876 187EMAIL:********************RussiaRTSoftMr. Alexey IsaevNikitinskaya 3RUS-105037 MoscowPhone: +7 495 742 6828FAX: +7 495 742 6829EMAIL:****************.ruSingaporeFlash TechnologyMr. Teo Kian HockNo 61, # 04-15 Kaki Bukit Av 1Shun Li Industrial ParkSGP-Singapore 417943Phone: +65 6749 6168FAX: +65 6749 6138EMAIL:*******************.sgSouth Korea, PangyoHancom MDS Inc.Mr. Dongwook Jun3FL. Hancom Tower49, Daewangpangyo-ro 644, Bundang-gu Seongnam-si, Gyeonggi-do, 463-400, ROK Phone: +82-31-627-3000FAX: +82-31-627-3100EMAIL:*********************SpainCaptura Electronica,SCCLMr. Juan Martinezc/Duero, 40E-08031 BarcelonaPhone: +34 93 429 5730FAX: +34 93 407 0778EMAIL:*******************SwedenNohau Solutions ABMr. Jörgen NilssonDerbyvägen 6DSE-21235 MalmoePhone: +46 40 592 206FAX: +46 40 592 229EMAIL:*********************** SwitzerlandJDT Jberg DatenTechnikMr. Andreas JbergZimmereistrasse 2CH-5734 Reinach AGPhone: +41 62 7710 886FAX:EMAIL:********************TaiwanSuperlink Technology Corp.Mr. Sulin Huang3F-8,No.77,Sec.1,Xintaiwu Rd.,Xizhi District, New Taipei City 22101, Taiwan, R.O.C. Phone: +886 2 26983456FAX: +886 2 26983535EMAIL:**********************.tw TunisiaLauterbach Consulting S.A.R.L.Mr. Khaled JmalRoute El Ain Km 3.5TN-3062 SfaxPhone: +216-31361061FAX: +216-74611723EMAIL:********************** Turkey-1Tektronik Muh. ve Tic. A.S.Mr. Hakan Y avuzCyberPlaza B-Blok, 702BBilkent06800 AnkaraPhone: +90 312 437 3000FAX: +90 312 437 1616EMAIL:******************.tr Turkey-2G3TEK Embedded Technologies Ltd. Mr. Celal AygunIlkyerlesim Mah. 445.Sok. No: 4806370 Batikent/AnkaraPhone: +90 312 3324769FAX: +90 312 3324769EMAIL:**************UKLauterbach GmbHMr. Richard CopemanAltlaufstr. 40D-85635 Höhenkirchen-Siegertsbrunn Phone: +49 8102 9876 190FAX: +49 8102 9876 187EMAIL:******************** USA EastLauterbach Inc.Mr. Udo Zoettler4 Mount Royal Ave.USA-Marlborough, MA 01752 Phone: +1 508 303 6812FAX: +1 508 303 6813EMAIL:********************** USA WestLauterbach Inc.Mr. Bob Kupyn1111 Main Street, Suite 620USA-Vancouver, WA. 98660 Phone: +1 503 524 2222FAX: +1 503 524 2223EMAIL:************************Additional InformationLauterbach GmbHAltlaufstr. 40D-85635 Höhenkirchen-SiegertsbrunnTel. ++49 8102 9876-0 FAX -999*******************uterbach.deLauterbach Inc.4 Mount Royal Ave.Marlboro MA 01752Phone (508) 303 6812 FAX (508) 303 6813 ********************** Lauterbach Ltd.11 Basepoint Enterprise Ctre Stroudley Road Basingstoke, Hants RG24 8UPPhone ++44-1256-333-690 FAX -661**********************http:/Lauterbach S.A.R.L.135 Chemin Des BassinsF-94035 Créteil CedexPhone ++33-149-562-030FAX ++33-149-562-039**********************http:/uterbach.fr Lauterbach Japan, Ltd.3-9-5 Shinyokohama Kouhoku-kuY okohama-shi Japan 222-0033Phone ++81-45-477-4511 FAX -4519*********************uterbach.co.jp Lauterbach s.r.l.Lauterbach s.r.l.Via Enzo Ferrieri 12I-20153 MilanoPhone ++39 02 45490282FAX ++39 02 45490428*********************uterbach.itSuzhou Lauterbach Consulting Co.,Ltd.Room 1605, Xing Hai International Square No.200, Xing Hai StreetSuzhou, 215021 PR of ChinaPhone: 0086-512 6265 8030FAX: 0086-512 6265 8032*********************DisclaimerThe information presented is intended to give overview information only.Changes and technical enhancements or modifications can be made with-out notice.。
superindicatorlibray源码编译
superindicatorlibray源码编译superindicatorlibrary是一个强大且易于使用的指示器库，可以用于在Android应用程序中添加各种指示器。
如果您想使用此库，您需要在Android Studio中编译它。
以下是编译superindicatorlibrary源代码的步骤：1. 打开Android Studio并创建一个新的空白项目。
2. 从GitHub上下载superindicatorlibrary的源代码。
3. 将下载的源代码解压缩到您的Android Studio项目的根目录中。
4. 在Android Studio中打开您的项目的build.gradle文件，并将以下内容添加到dependencies块中：implementation project(':library')5. 在Android Studio中打开superindicatorlibrary的build.gradle文件，并确保以下内容包含在其中：android {compileSdkVersion 28buildToolsVersion '28.0.3'defaultConfig {minSdkVersion 14targetSdkVersion 28versionCode 1versionName '1.0'}}dependencies {implementation'com.android.support:appcompat-v7:28.0.0'implementation 'com.android.support:support-v4:28.0.0' }6. 在Android Studio的菜单中选择Build -> Make Project。
7. 如果没有错误，您现在已经成功编译了superindicatorlibrary的源代码。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
A baseline is a set of CPU features supported by every host in the cluster.
CPU baseline feature set
CPUID
CPUID
CPUID
CPUID
X…
X…
X…
K…
cluster enabled for EVC
DRS Cluster Settings: Swap File Location
Store the virtual machine’s swap file with the virtual machine or in a specified datastore.
VMware® recommends that you store the swap file in the same directory as the virtual machine.
Host Scalability
Module 12
© 2012 VMware Inc. All rights reserved
You Are Here
Course Introduction Introduction to Virtualization Creating Virtual Machines VMware vCenter Server Configuring and Managing Virtual Networks Configuring and Managing vSphere Storage
Automation level Manual Partially automated Fully automated
Initial VM placement Manual Automatic Automatic
Dynamic balancing Manual Manual Automatic
Migration threshold determines how frequently virtual machines are migrated.
VMware vSphere: Install, Configure, Manage – Revision A
12-9
© 2012 VMware Inc. All rights reserved
EVC Cluster Requirements
All hosts in the cluster must meet the following requirements: Use CPUs from a single vendor (either Intel or AMD)
Virtual Machine Management
VMware vSphere: Install, Configure, Manage – Revision A
12-2
© 2012 VMware Inc. All rights reserved
Importance
As you scale your VMware vSphere® environment, you must be aware of the vSphere features and functions that will help you manage the hosts in your environment.
A DRS cluster is managed by VMware® vCenter Server™ and has these resource management capabilities: Initial placement Load balancing Power management
Data Protection
Access and Authentication Control
Resource Management and Monitoring High Availability and Fault Tolerance Host Scalability Patch Management Installing VMware vSphere Components
VMware vSphere: Install, Configure, Manage – Revision A
12ห้องสมุดไป่ตู้4
© 2012 VMware Inc. All rights reserved
What Is a Cluster?
A cluster is a collection of VMware vSphere® ESXi hosts and associated virtual machines with VMware vSphere® High Availability and DRS enabled.
VMware vSphere: Install, Configure, Manage – Revision A 12-7
© 2012 VMware Inc. All rights reserved
DRS Cluster Settings: EVC
EVC is a cluster feature that prevents vMotion migrations from failing because of incompatible CPUs.
VMware vSphere: Install, Configure, Manage – Revision A
12-11
© 2012 VMware Inc. All rights reserved
DRS Cluster Settings: Affinity Rules for Virtual Machines
Affinity rules for virtual machines specify that either selected virtual machines be placed on the same host (affinity) or on different hosts (anti-affinity). Affinity rules:
Applications in virtual machines must be well-behaved.
VMware vSphere: Install, Configure, Manage – Revision A
12-10
© 2012 VMware Inc. All rights reserved
VMware vSphere: Install, Configure, Manage – Revision A
12-6
© 2012 VMware Inc. All rights reserved
DRS Cluster Settings: Automation Level
Configure automation level for initial placement of virtual machines and dynamic balancing while virtual machines are running.
VMware vSphere: Install, Configure, Manage – Revision A
12-3
© 2012 VMware Inc. All rights reserved
Learner Objectives
After this lesson, you should be able to do the following: Describe the functions of a VMware vSphere® Distributed Resource Scheduler™ (DRS) cluster. Explain the benefits of Enhanced vMotion Compatibility (EVC). Create a DRS cluster. View information about a DRS cluster. Remove a host from a DRS cluster.
• •
Use Intel CPUs with Core 2 micro architecture and newer Use AMD first-generation Opteron CPUs and newer
Run ESXi 3.5 Update 2 or later Be connected to vCenter Server Be enabled for hardware virtualization (AMD-V or Intel VT) Be enabled for execution-disable technology (AMD No eXecute (NX) or Intel eXecute Disable (XD)) Be configured for vMotion migration
VMware vSphere: Install, Configure, Manage – Revision A
12-8
© 2012 VMware Inc. All rights reserved
CPU Baselines for an EVC Cluster
EVC works at the cluster level, using CPU baselines to configure all processors included in the cluster enabled for EVC.
To use shared storage, configure all hosts in the cluster. Volumes must be accessible by all hosts. Volumes must be large enough to store all virtual disks for your virtual machine.