英文版工程招标说明书
国际工程招标说明书范本(英文版)

____________ , __________,__________. Tendering
is open to all tenderness from eligible source
countries as defined under the “Guidelines for
procurement” of the World Bank.
of ________________ Project. It is intended that
part of the proceeds of this loan and credit will be
applied to eligible payment under various contracts for
路漫漫其悠远
Instructions to Tenderers
General 1. Description of Works (sketch)
All tenderers shall have equal access for supply of domestic labour and material.
form Joint venture with a domestic contractor, such
a request will be considered if received within ______
days before the closing date for submission of tenders.
–
5. All tenders must be accompanied by a
Tender Security in an acceptable form and must
国际工程招标说明书格式—中英文

国际工程招标说明书格式——中英文一、中华人民共和国从世界银行申请获得贷款,用于支付_____项目的费用。
<}100{>1. The People's Republic of China has-applied fora loan and credit from the World Bank towards the cost of________________ Project.部分贷款将用于支付工程建筑、____等各种合同。
<}100{>It is intended that part of the proceeds of this loan and credit will be applied to eligible payment under various contracts for ____________ , __________, __________. 所有依世界银行指导原则具有资格的国家,都可参加招标。
<}100{>Tendering is open to all tenderers from eligible source countries as defined under the "Guidelines for procurement" of the World Bank.二、中国__公司(以下简称A公司)邀请具有资格的投标者提供密封的标书,提供完成合同工程所需的劳力、材料、设备和服务。
<}100{>2. ___________ Company now invites sealed tenders from pre-qualified tenderers for provision of the necessary labour, materials, equipment and services for the construction and completion of the project.三、具有资格的投标者可从以下地址获得更多的信息,或参看招标文件:<}100{>3. Pre-qualified tenderers may obtain further information from, and inspect the tender documents at the office of: ________.四、每一位具有资格的投标者在交纳_____美元(或人民币),并提交书面申请后,均可从上述地址获得招标文件。
工程招标文件范本英文

1. IntroductionThis document is issued by [Company Name] (hereinafter referred to as "Buyer") to invite bids from eligible contractors for the construction of [Project Name] (hereinafter referred to as "Project"). The Project is located at [Project Address] and is scheduled to commence on [Commencement Date] and be completed by [Completion Date]. The Buyer reserves the right to accept or reject any or all bids submitted.2. Scope of WorkThe scope of work for the Project includes, but is not limited to, the following:- Construction of new buildings or facilities- Renovation of existing buildings or facilities- Infrastructure development, including roads, utilities, and drainage systems- Installation of mechanical, electrical, and plumbing (MEP) systems- Landscape design and implementation- Environmental compliance and safety measures3. Tender DocumentsThe tender documents consist of the following:- Tender invitation letter- Technical specifications- General conditions of contract- Special conditions of contract- Drawings and plans- Bill of quantities- Form of tender- Instructions to biddersAll tender documents are subject to amendment or withdrawal by the Buyer at any time before the closing date of the tender.4. Bidders EligibilityTo be eligible to submit a bid, bidders must meet the following criteria:- Be a legal entity registered and operating in accordance with the laws of the country where the Project is located- Have a minimum of [number] years of experience in the construction industry- Possess the necessary qualifications, licenses, and insurance required for the execution of the Project- Have a good financial standing, as evidenced by audited financial statements for the last three years- Have no unresolved legal disputes or claims against the bidder5. Tender SubmissionBids must be submitted in a sealed envelope marked "Tender for [Project Name]" to the address specified in the instructions to bidders. Bids must be received by the Buyer no later than [Closing Date and Time]. Late bids will not be considered.6. Evaluation CriteriaThe evaluation of bids will be based on the following criteria:- Compliance with technical specifications- Price competitiveness- Experience and track record of the bidder- Financial strength and stability of the bidder- Compliance with legal and regulatory requirements7. Contract AwardThe Buyer reserves the right to award the contract to the bidder whose bid is deemed to be the most advantageous to the Buyer, taking into account the evaluation criteria set forth in the tender documents.8. Contract ConditionsThe contract between the Buyer and the successful bidder will be governed by the following conditions:- General conditions of contract- Special conditions of contract- Technical specifications- Drawings and plans- Bill of quantitiesThe successful bidder will be required to enter into a formal contract with the Buyer within [number] days of the contract award notification.9. Tender SecurityAll bidders are required to submit a tender security of [amount] as a guarantee of their bid. The tender security will be returned to the bidder upon acceptance of the bid or, if the bid is rejected, within [number] days of the closing date of the tender.10. Instructions to Bidders- All bids must be submitted in the form provided in the tender documents.- Bidders must ensure that all information provided in the bid is accurate and complete.- Bidders must provide evidence of their compliance with the eligibility criteria.- Bidders must adhere to the tender submission deadlines and procedures.- Bidders must not discuss their bids with other bidders or with any unauthorized person.11. ConfidentialityThe Buyer reserves the right to treat all information submitted by bidders as confidential and will not disclose such information to any third party without the prior written consent of the bidder.12. Contact InformationFor any queries or clarifications regarding the tender, please contact:[Contact Name][Company Name][Contact Address][Contact Phone Number][Contact Email Address]13. ConclusionThe Buyer invites all interested and eligible contractors to submittheir bids for the construction of [Project Name]. The Buyer looks forward to receiving competitive and compliant bids and aims to select the most suitable bidder to successfully execute the Project.[Company Name][Date]---Note: This is a simplified template for an engineering project tender document. Depending on the complexity of the project and the legal requirements of the jurisdiction, additional clauses, conditions, and requirements may be necessary. It is advisable to consult with legal and technical experts when preparing tender documents.。
国际工程招标说明书格式中英对照完整版

国际工程招标说明书格式中英对照HUA system office room 【HUA16H-TTMS2A-HUAS8Q8-HUAH1688】国际工程招标说明书格式(中英对照)日期:合同招标一、____(招标单位)从____银行申请获得贷款,用于支付_____项目的费用。
部分贷款将用于支付工程建筑、____等各种合同。
所有具有资格的企业,都可参加投标。
二、____公司(以下简称A公司)邀请具有资格的投标者提供密封的标书,提供完成合同工程所需的劳力、材料、设备和服务。
三、具有资格的投标者可从以下地址获得更多的信息,或参看招标文件:A公司:(地址):四、每一位具有资格的投标者在交纳_____美元(或人民币),并提交书面申请后,均可从上述地址获得招标文件。
五、每一份标书都要附一份投标保证书,且应不迟于_____(时间)提交给A公司。
六、所有标书将在___(时间)当着投标者代表的面开标。
七、如果具有资格的国外投标者希望与一位中国国内的承包人组建合资公司,需在投标截止日期前30天提出要求。
业主有权决定是否同意选定的国内承包人。
八、标前会议将在___(时间)___(地址)召开。
投标者须知一、工程概述(根据具体情况写):二、资金来源:(一)A公司向___银行申请一笔贷款,用以支付_____工程。
其中部分贷款将用于支付此合同工程。
只有应______的要求,根据贷款协议的条件,才会同意付款。
除外,任何组织不能从贷款协议中获得权利或取得贷款。
(二)______银行贷款只用于支付与______有商贸关系的成员生产的产品和提供的服务。
(三)______银行贷款不足的部分将由业主用______提供的资金支付。
三、资格要求(一)所有根据 ______银行的"采购指导原则"具有资格的成员均可投标。
(二)本合同项下的一切货物、服务均应来自上述具有资格的成员。
本合同项下的一切开支仅限于支付这样的货物和服务。
(三)货物、服务来源地与投标者国籍含义不同。
英文招标书完整版范文模板

英文招标书完整版范文模板Date: [Insert Date][Insert Name and Address of the Company Inviting Bids]Attention: [Insert Name and Designation of the Concerned Person]Subject: [Insert Project/Contract Name or Reference Number]Dear [Recipient's Name],We, [Your Company Name], hereby submit our bid for [Insert Project/Contract Name]. We have thoroughly reviewed the tender documents and are pleased to provide you with our comprehensive bid proposal. Our bid comprises the following sections:1. Executive Summary:In this section, we will provide a concise overview of our company, including our experience, expertise, and key capabilities relevant to the project.2. Technical Proposal:This section will outline our approach and methodology for the project. We will explain our understanding of the project requirements, proposed solutions, and any innovative ideas or technologies that set us apart from other bidders.3. Project Schedule:Here, we will present a detailed timeline for the project, including key milestones, deliverables, and the estimated duration for each phase. Our project schedule demonstrates our commitment to completing the project within the specified timeframe.4. Team and Organization:This section will introduce our project team members, highlighting their qualifications, relevant experience, and their roles within the project. We will also provide an overview of our organization's structure and resources, ensuring that we have the capacity to successfully execute the project.5. Financial Proposal:In this section, we will present our pricing structure, including a breakdown of costs for labor, materials, equipment, and any other relevant expenses. Our financial proposal will be transparent and competitive, reflecting the value for money that we offer.6. Qualifications and Past Performance:Here, we will provide details of our company's qualifications, certifications, and relevant licenses. Additionally, we will showcase our past projects that are similar in nature to the present contract, highlighting our successful track record and client satisfaction.7. Contract Terms and Conditions:This section will outline the proposed terms and conditions of the contract, including payment terms, warranties, dispute resolutionmechanisms, and any specific requirements from your end. We are willing to negotiate and align the contract terms to ensure mutual benefit.8. Appendices:Appendices will include any necessary supporting documents such as company brochures, case studies, references, financial statements, and legal certifications.In conclusion, our bid for the [Insert Project/Contract Name] incorporates our technical expertise, competitive pricing, and commitment to delivering outstanding results. We are confident that our proposal meets and exceeds the requirements outlined in the tender documents.We appreciate the opportunity to participate in this tender process and remain at your disposal for any further information or clarification needed. We look forward to the possibility of working with you and contributing to the successful completion of this project.Thank you for considering our bid.Yours sincerely,[Your Name][Your Designation][Your Company Name][Contact Information]。
国际工程招标说明手册格式(中英对照)

国际工程招标说明书格式(中英对照)日期:合同招标一、____(招标单位)从____银行申请获得贷款,用于支付_____项目的费用。
所有具有资格的企业,都可参加投标。
A公司:,并提交七、如果具有资格的国外投标者希望与一位中国国内的承包人组建合资公司,需在投标截止日期前30天提出要求。
业主有权决定是否同意选定的国内承包人。
八、标前会议将在___(时间)___(地址)召开。
投标者须知一、工程概述(根据具体情况写):二、资金来源:(一)A公司向___银行申请一笔贷款,用以支付_____工程。
其中部分贷款将用于支付此合同工程。
只有应______的要求,根据贷款协议的条件,才会同意付款。
除外,任何组织不能从贷款协议中获得权利或取得贷款。
(二)______银行贷款只用于支付与______和提供的服务。
(三)______银行贷款不足的部分将由业主用三、资格要求(一)所有根据______银行的"______规定的证明,应提供合资者的材料。
(2)提供主要合同执行人的资格、经历证明材料。
(3)填写执行合同计划所需设备。
(4)填写可能的分包人。
(5)目前进行中涉及投标者的诉讼的情况。
(6)建设构想细节。
(五)投标者可更新资格证明申请,在投标日亲手交出。
(六)由两家或两家以上公司组成的合资企业应满足以下条件:(1)标书和投标成功后的协议书对所有合资人都有法律约束力。
(2)由所有合资人的授权签字人签署并提交一份委托书,提名合资人中的一个为主办人。
(3)7.5%的优惠时,应(一)建议投标者去工程现场参观,以便获得足够的信息准备标书,撰写合同。
现场参观费用由投标者自己承担。
(二)业主或其代理人A公司将准备一份现场参观交通、食宿安排协议,在标前会议上向投标者宣布。
详细情况见十六条款的规定。
(三)业主或其代理人A公司将为投标者提供通行证,允许其到工程现场作安排。
如果业主或其代理人因发放这样的通行证,造成投标者或其代理人、人员遭受人身侵害(致命或非致命)伤害,财产遗失或其他损害、开支时,业主或代理人不负责。
英文版招标文件

Title: Construction of a New Administrative BuildingIssue Date: [Insert Date]Closing Date: [Insert Date]Bid Opening Date and Time: [Insert Date and Time]Bid Opening Location: [Insert Location]Introduction:This tender is issued by [Insert Company Name] (hereinafter referred to as "the Employer") for the construction of a new administrative building. The Employer invites eligible contractors to submit bids for this project. This document outlines the project details, bid submission requirements, evaluation criteria, and contract terms.1. Project Overview:1.1 Project Name:New Administrative Building1.2 Project Location:[Insert Address, City, State, Zip Code]1.3 Project Scope:The project includes the construction of a new administrative building with a total floor area of approximately [Insert Total Floor Area in Square Feet/Meters]. The building will consist of [Insert Number] floors, including ground floor, basement, and roof, with the followingfacilities:- Reception area- Conference rooms- Office spaces- Staff lounges- Restrooms- Kitchenette- Parking facility- Security systems- Fire alarm systems1.4 Project Duration:The project is expected to be completed within [Insert Duration in Months] months from the date of the contract signing.2. Bid Submission Requirements:2.1 Eligibility:All bidders must be registered and in good standing with the relevant government authorities and must have a valid license to engage in construction activities.2.2 Qualifications:Bidders must have at least [Insert Number] years of experience in similar construction projects and must provide evidence of their qualifications, including a list of completed projects, references, and a detailed resume of key personnel involved in the project.2.3 Financial Stability:Bidders must demonstrate their financial stability by providing audited financial statements for the last [Insert Number] years.2.4 Bid Security:A bid security of [Insert Amount] shall be submitted with each bid. The bid security shall be in the form of a bank guarantee or a cashier's check made payable to [Insert Company Name].2.5 Bid Documents:All bids must be submitted in accordance with the bid forms provided in this tender document. Bidders must provide detailed information regarding their proposed construction methods, schedules, and cost estimates.2.6 Submission Deadline:Bids must be submitted to [Insert Address, City, State, Zip Code] on or before [Insert Closing Date] at [Insert Closing Time]. Late bids will not be considered.3. Evaluation Criteria:3.1 Technical Proposal:The technical proposal will be evaluated based on the following criteria:- Compliance with the project requirements- Construction methodology and schedule- Quality of materials and workmanship- Safety and environmental considerations- Innovation and efficiency3.2 Financial Proposal:The financial proposal will be evaluated based on the following criteria:- Total cost of the project- Cost-effectiveness- Proposed payment schedule3.3 Experience and Qualifications:The bidder's experience, qualifications, and financial stability will be taken into consideration during the evaluation process.4. Contract Terms:4.1 Contract Duration:The contract will be for a period of [Insert Duration in Months] months from the date of contract signing.4.2 Payment Terms:Payment will be made in accordance with the agreed-upon schedule and based on the completion of specific milestones.4.3 Performance Bond:A performance bond of [Insert Amount] will be required upon the signing of the contract.4.4 Insurance Requirements:The contractor must provide proof of adequate insurance coverage, including general liability, workers' compensation, and property insurance.4.5 Compliance with Laws and Regulations:The contractor must comply with all applicable laws, regulations, and codes during the construction process.5. Instructions for Bidders:5.1 Tender Documents:The complete set of tender documents can be obtained from [InsertContact Name], [Insert Contact Position], [Insert Company Name], [Insert Address, City, State, Zip Code], by [Insert Date]. A non-refundable fee of [Insert Amount] shall be paid for the tender documents.5.2 Clarifications:Any clarifications or questions regarding the tender documents should be submitted in writing to [Insert Contact Name], [Insert Contact Position], [Insert Company Name], [Insert Address, City, State, Zip Code], by [Insert Date].5.3 Non-Discrimination:The Employer reserves the right to reject any bid that does not comply with the tender requirements or is submitted by an ineligible bidder.6. Conclusion:The Employer looks forward to receiving competitive bids from eligible contractors for the construction of the new administrative building. Bidders are encouraged to carefully review the tender documents and submit their bids in accordance with the instructions provided.Contact Information:[Insert Company Name][Insert Address, City, State, Zip Code][Insert Contact Name][Insert Contact Position][Insert Contact Email][Insert Contact Phone Number]---Note: This is a sample tender document and should be customized to fit the specific requirements of the project and the Employer. It is recommended to consult with legal and construction professionals when preparing a tender document.。
招投标合同国际工程招标说明书英文

Invitation to Tender and Contract forInternational Engineering Projects IntroductionThis document serves as an invitation to tender for international engineering projects and outlines the requirements for bidders to submit competitive proposals. The project is seeking a contractor to complete the engineering work in accordance with the technical specifications and requirements outlined in this document.Project DescriptionThe project is an international engineering initiative that will consist of the following:•Engineering design and planning•Procurement of materials and equipment•Construction of the project site•Installation and commissioning of the facilities•Testing and project commissioningScope of WorkThe successful contractor will be responsible for the following:1.Conducting a thorough review of the technical requirements and specifications provided in this document before submitting a proposal2.Providing a comprehensive proposal that outlines the proposed approach to the project, including project timeline, budget, and responsible parties3.Submitting detailed engineering designs and plans for review and approval4.Procuring all necessary materials and equipment for the project5.Conducting construction works on the site for the duration of the project6.Training the client’s designated personnel to operate and maintain the project’s facilities after installation and commissioningRequirements1.Bidders must be legally registered and authorized to conduct business in the country in which the project is located.2.Bidders must provide evidence of relevant experience in international engineering projects, including similar projects completed in the past.3.Bidders must provide evidence of financial capability to undertake the project, including bank statements and/or letters of credit.4.Bidders must provide detailed technical proposals, including project timelines, budgets, and personnel arrangements.Selection CriteriaThe contractor for this project will be selected according to the following criteria:1.Technical proposal quality and suitability for the project2.Bidders’ experience with similar projects3.Bidders’ financial capability4.Price competitivenessSubmission GuidelinesAll proposals must be submitted by [date and time] and delivered to the following address:[Address and contact information for proposal delivery]Proposals must include the following:1.Technical proposal according to the guidelines included in this document2.Financial proposal outlining the total proposed budget for the project3.Any other relevant documents, such as company registration and experience certificatesContract and TermsThe contract for the project will be based on the following terms:1.Contract term: [Number of months/years for the duration of the project]2.Payment terms: [Payment schedule and method]3.Contract termination: [Conditions and procedures for contract termination]4.Intellectual property: The contractor retains ownership of any intellectual property generated during the project.5.Confidentiality: Both parties agree to handle all information related to the project with confidentiality.ConclusionThank you for your interest in this international engineering project. We encourage all bidders to submit a proposal that is in line with the outlined requirements and guidelines in this document. For any further inquiries, please contact [Contact information]. We look forward to reviewing your proposal.。
英文版国外招标说明,DOC文件格式。

1.1 PREAMBLE1.2 UNITS OF MEASUREMENTS1.3 BILL OF QUANTITIESSERIES 1000 GeneralSERIES 2000 DrainageSERIES 3000 Earthworks and Pavement Layers of Gravel or Crushed Stone SERIES 4000 Bituminous Layers and Seals and Concrete Paving SurfaceSERIES 5000 Ancillary RoadworksSERIES 6000 StructuresSERIES 8000 DayworksSERIES 9000 Street LightingA. Preamble1. The Bill of Quantities shall be read in conjunction with the Instructions to Bidders, General and Special Conditions of Contract, Technical Specifications, and Drawings. The item number and Specification number refer to the relevant sections of the Standard and/or Special Specifications2. The quantities given in the Bill of Quantities are estimated and provisional, and are given to provide a common basis for bidding. The basis of payment will be the actual quantities of work ordered and carried out, as measured by the Contractor and verified by the Engineer and valued at the rates and prices bid in the priced Bill of Quantities, where applicable, and otherwise at such rates and prices as the Engineer may fix within the terms of the Contract.3. The rates and prices bid in the priced Bill of Quantities shall, except insofar as it is otherwise provided under the Contract, include all Constructional Plant, labour, supervision, materials, erection, maintenance, insurance, profit, taxes, and duties, together with all general risks, liabilities, and obligations set out or implied in the Contract.4. A rate or price shall be entered against each item in the priced Bill of Quantities, whether quantities are stated or not. The cost of Items against which the Contractor has failed to enter a rate or price shall be deemed to be covered by other rates and prices entered in the Bill of Quantities.5. The whole cost of complying with the provisions of the Contract shall be included in the Items provided in the priced Bill of Quantities, and where no Items are provided, the cost shall be deemed to be distributed among the rates and prices entered for the related Items of Work.6. Without affecting the generality of the foregoing provisions, the rates and prices entered by the Contractor in the Bill of Quantities shall include the cost and expense of the following: -i.The provision, storage, transport, use and maintenance of all materials, equipment,machinery and tools.ii.The provision, maintenance and welfare of all staff and labour and their accommodation, transport etc, and the supply of all immigration permits and otherrequirements.iii.Setting out, measuring, inspection, supervision and any topographical survey and drawing necessary for the execution or measurement of the work.iv.The provision, transport, use and maintenance of all consumable stores, fuel, water, drainage, electricity and telephones.v.Sampling, testing and trials, including checking information given by the Engineer.vi.Injury caused to the works under construction, equipment, materials and consumable stores by weather conditions.vii.The provision, erection and removal of al l Contractors’ Offices, equipment yard, stores and temporary works, including fencing and all site restrictions.viii.Restoration of services disrupted during implementation of the works.ix.Repairs to the Works during the Defects Liability Period.7. General directions and descriptions of work and materials are not necessarily repeated nor summarized in the Bill of Quantities. References to the relevant sections of the Contractdocumentation shall be made before entering prices against each item in the priced Bill of Quantities.8. Provisional Sums included and so designated in the Bill of Quantities shall be expended in whole or in part at the direction and discretion of the Engineer in accordance with Sub-Clause 13.5 and Clause 13.6 of the General Conditions.9. The method of measurement of completed work for payment shall be as specified in relevant sections of Part 2 – Works Requirements (Specifications) of the Bid document and in accordance with the following:9.1All work completed under the contract will be measured by the Engineer, using theInternational System of Units.9.2The method of measurement and computations to be used in the determination ofquantities of material furnished and work performed under the contract will be those methods generally recognized as conforming to good engineering practice. The quantities will be computed net with no allowance for bulking, shrinkage or waste.9.3Unless otherwise specified, longitudinal measurements for area computations will be madehorizontally, and no deductions will be made for individual fixtures (or leave–outs) having an area of one square metre or less. Unless otherwise specified, transverse measurements for area computations will be the net dimensions shown on the drawings or ordered in writing by the Engineer.9.4Unless otherwise specified, all contract items which are measured by the linear metre suchas pipe culverts, under drains and similar items shall be measured parallel to the base or foundation upon which such items are placed.9.5In computing volumes of excavation the average end area method or other acceptablemethods will be used.9.6Rental of equipment will be measured by time in hours of actual working time andnecessary traveling time of the equipment within the limits of the work.9.7When standard manufactured items are specified such as fence, wire, plates, rolledshapes, pipe etc, and these items are identified by gauge, unit weight, section dimensions, etc, such identification will be considered to be nominal weights or dimensions. Unless more stringently controlled by tolerances in cited specifications, manufacturing tolerances established by the industries involved will be accepted.9.8When the estimated quantities for a specific portion of the work are designated as the payquantities in the contract, they shall be the final quantities for which payment for such specific portion of the work will be made, unless the dimensions of said portions of the work shown on the plans are revised by the Engineer. If revised dimensions result in an increase or decrease in the quantities of such work, the final quantities for payment will be revised in the amount by the authorized changes in the dimensions.10. Any arithmetic errors in computation or summation will be corrected by the Employer as follows:(a) where there is a discrepancy between amounts in figures and in words, the amountin words will govern; and(b) where there is a discrepancy between the unit rate and the total amount derivedfrom the multiplication of the unit price and the quantity, the unit rate as quoted willgovern, unless in the opinion of the Employer, there is an obviously grossmisplacement of the decimal point in the unit price, in which event the total amountas quoted will govern and the unit rate will be corrected.11. Rock is defined as all materials that, in the opinion of the Engineer, require blasting, orthe use of metal wedges and sledgehammers, or the use of compressed air drilling for their removal, and that cannot be extracted by ripping with a tractor of at least 150 brake hp with a single, rear-mounted, heavy-duty ripper.12.Dayworks Schedules12.1GeneralReference should be made to Sub-Clause 13.6 of the General Conditions. Work shall not be executed on a Dayworks basis except by written order of the Engineer. Bidders shall enter basic rates for Dayworks items in the Schedules, which rates shall apply to any quantity of Dayworks ordered by the Engineer. Nominal quantities have been indicated against each item of Dayworks, and the extended total for Dayworks shall be carried forward as a Provisional Sum to the Summary Total Bid Amount. Unless otherwise adjusted, payments for Dayworks shall be subject to price adjustment in accordance with the provisions in the Conditions of Contract.12.2Dayworks – LabourIn calculating payments due to the Contractor for the execution of Dayworks, the hours for labour will be reckoned from the time of arrival of the labour at the job site to execute the particular item of Dayworks to the time of return to the original place of departure, but excluding meal breaks and rest periods. Only the time of classes of labour directly doing work ordered by the Engineer and for which they are competent to perform will be measured. The time of gangers (charge hands) actually doing work with the gangs will also be measured but not the time of foremen or other supervisory personnelThe Contractor shall be entitled to payment in respect of the total time that labour is employed on Dayworks, calculated at the rates entered by him in SERIES 8000, section 8100, DAYWORKS: LABOUR.The said rates shall be deemed to include due and complete allowance for wages and allowances paid to such labour, transportation time, overtime, subsistence allowance, sums paid to or on behalf of such labour for social benefits in accordance with the Tanzania Law; Contractor’s profits, overheads, superintendence, liabilities and insurances, timekeeping, clerical and office work, the use of consumable stores, water, lighting and power; use and repair of staging, scaffolding, workshops and stores, portable power tools, manual plant and tools; supervision by the Contractor’s staff, foreman and other supervisory personnel; and all charges incidentals to the foregoing.Payment will be in local and foreign currencies as applicable.12.3Dayworks MaterialsThe Contractor shall be entitled to payment in respect of materials used for Dayworks, at the basic rates entered by him in SERIES 8000, section 8200 DAYWORKS: MATERIALS, together with an additional percentage payment on the basic rates to cover overhead charges and profits, as follows:(a)The basic rates for materials shall be calculated on the basis of the invoiced price,freight, insurance, handling expenses, damage, losses, etc, and shall provide fordelivery to store or stockpiling at the Site. The basic rates shall be stated in localcurrency but payment will be made in the currency or currencies expended uponpresentation of supporting documentation.(b)The additional percentage payment to be quoted by the Bidder and applied to theequivalent local currency payments made under (a) above shall be deemed to coverthe Contractor’s profit, overhead, superintendence, liabilities and insurances andcharges incidental to the foregoing. Payment under this item will be in local andforeign currencies as applicable.(c)Unless specifically scheduled the cost of hauling materials for use on work ordered tobe carried out as Dayworks from the store or stockpile on the Site to the placewhere it is to be used will be paid in accordance with the terms of labour andEquipment in this Bill.12.4Dayworks – EquipmentThe Contractor shall be entitled to payments in respect of Contractor’s Equipment already at Site and employed on Dayworks at the basic rental rates entered by him SERIES 8000, section 8300 DAYWORKS: EQUIPMENT.The said rates shall be deemed to include, due and complete allowance for depreciation, interest, indemnity and insurance, drivers, operators and assistants, repairs, maintenance supplies, fuel, lubricants, and other consumables and all overheads, profits, supervision and administration costs related to use of such equipment.In calculating the payment due to the Contractor for Equipment employed on Dayworks, only the actual number of working hours as determined by the Engineer will be eligible for payment, except that where applicable and agreed with the Engineer, the traveling time from the part of the Site where the Equipment was located when ordered by the Engineer to be employed on Dayworks and the time for return journey shall be included for payment.Payment for this item will be in local and foreign currencies as applicable.B. Work Items1. The Bill of Quantities usually contains the following part Bills, which have been grouped according to the nature or timing of the work:SERIES 1000: General Items;SERIES 2000: Drainage;SERIES 3000: Earthworks and Pavement Layers of Gravel or Crushed RockSERIES 4000: Bituminous Layers and Seals;SERIES 5000: Ancillary Roadworks;SERIES 6000: Structures;SERIES 8000: DayworksSERIES 9000 Street Lighting2. Bidders shall price the Bill of Quantities in local currency only and shall indicate in the Appendix to Bid the percentage expected for payment in foreign currency or currenciesThe tables in BOQ must be prepared in accordance with the currency alternative retained in BDS – ITB 15.1.6 1.2 UNITS OF MEASUREMENTThe units of measurement used herein and their abbreviations are as follows:UNIT ABBREVIATIONMillimetre mmMetre mKilometre kmSquare Millimetre Sq.mm ormm2Square Metre sq.m or m2Hectare haCubic Meter cu.m or m3 Gramme gKilogramme kgTonne (1000 Kg) tonneLitres litre or lNumber No. or nrHour hrVehicle Month veh.month Percentage %Provisional Sum PSLump Sum LS。
招标文件英文模板

[Company Name][Company Address][City, State, Zip Code][Country][Phone Number][Email Address][Website]Date: [Insert Date]TO:[Potential Bidders’ Name][Company Name][Company Address][City, State, Zip Code][Country]SUBJECT: Invitation to Bid for [Project/Service Name]1. Introduction[Company Name] hereby invites sealed bids from qualified contractors/ vendors for the supply and installation of [specify the goods/services required] as per the specifications and terms and conditions set forth in this bid document. The project is located at [Project Location] andis scheduled to commence on [Start Date] and be completed by [Completion Date].2. Scope of WorkThe scope of work includes but is not limited to the following:- Detailed description of the project, including the nature of the goods/services required.- List of specific tasks or deliverables to be performed.- Any special requirements or considerations to be taken into account.3. Bidders EligibilityTo be eligible to submit a bid, the bidder must:- Be a legally registered and operating business entity.- Have a minimum of [number] years of experience in the relevant field.- Possess the necessary licenses, permits, and insurance to perform the work.- Provide a current certificate of good standing from the appropriate licensing authority.- Demonstrate financial stability and capability to undertake the project.4. Bid Submission RequirementsAll bids must be submitted in a sealed envelope marked with thefollowing information:- Bidder’s Name and Contact Information- Project/Service Name- Date of Submission- The bid must be submitted to [Address for Submission] by [Closing Date and Time].5. Bid FormatThe bid should be prepared in the following format:- Cover Page: Provide the bidder’s name, contact information, and a clear statement of the bid amount.- Technical Proposal: Detail the methodology, approach, and resourcesthat will be used to complete the project.- Financial Proposal: Include a detailed breakdown of the costs,including labor, materials, equipment, and any other expenses.- References: Provide a list of at least [number] references fromprevious similar projects.- Insurance Certificates: Attach copies of current liability and workers’ compensation insurance certificates.- Warranty Information: Outline the warranty period and terms for the goods/services provided.6. Evaluation CriteriaBids will be evaluated based on the following criteria:- Compliance with the bid document requirements.- Technical expertise and proposed methodology.- Financial proposal and cost-effectiveness.- Past performance and references.- Ability to meet the project schedule and deadlines.7. Bid Opening and AwardBids will be opened at [Time and Date of Bid Opening] in the presence of bidders or their authorized representatives. The award will be made tothe bidder whose bid is determined to be the most advantageous to [Company Name], considering the evaluation criteria.8. Contract Terms and ConditionsThe successful bidder will be required to enter into a contract with [Company Name] that includes the following terms and conditions:- Detailed project scope and specifications.- Payment terms and schedule.- Delivery or performance schedule.- Quality assurance and control measures.- Liability and indemnification provisions.- Termination clause.9. Contact InformationFor any questions or clarifications regarding this bid document, please contact:[Name][Title][Company Name][Phone Number][Email Address]10. Submission of BidsBids must be submitted in a sealed envelope and marked as follows:FOR: [Project/Service Name] Bid SubmissionFROM: [Bidder’s Name][Date of Submission][Closing Date and Time]11. Disposal of BidsAll bids received will be publicly opened and read aloud at the specified bid opening time and date. Unsuccessful bids will be disposed of in accordance with applicable laws and regulations.12. Instructions to Bidders- Bidders are responsible for reading and understanding all terms and conditions contained in this bid document.- Bidders are required to provide all necessary information as requested in the bid document.- Bidders must ensure that their bid is received by the closing date and time.- Bidders are responsible for any costs associated with the preparation and submission of their bid.13. Final Notes[Company Name] reserves the right to reject any or all bids, to cancel the bid process, or to negotiate with bidders if deemed necessary in the best interest of the project.[Company Name][Signature of Authorized Representative][Title of Authorized Representative][Date]---Please note that this is a template and should be customized to fit the specific requirements of the project or service being bid. It is also important to consult with legal counsel to ensure that all documents comply with local laws and regulations.。
国际工程招标说明书格式附英文

国际工程招标说明书格式(附英文)日期:【XX】合同招标一、中华人民共和国从世界银行申请获得贷款,用于支付___________ 项目的费用。
部分贷款将用于支付工程建筑、_________ 等各种合同。
所有依世界银行指导原则具有资格的国家,都可参加招标。
二、中国____ 公司(以下简称A公司)邀请具有资格的投标者提供密封的标书,提供完成合同工程所需的劳力、材料、设备和服务。
三、具有资格的投标者可从以下地址获得更多的信息,或参看招标文件:xx A公司(地址)四、每一位具有资格的投标者在交纳_________ 美元(或人民币),并提交书面申请后,均可从上述地址获得招标文件。
五、每一份标书都要附一份投标保证书,且应不迟于___________ (时间)提交给A公司。
六、所有标书将在__________ (时间)当着投标者代表的面开标。
七、如果具有资格的国外投标者希望与一位中国国内的承包人组建合资公司,需在投标截止日期前3 0天提出要求。
业主有权决定是否同意选定的国内承包人。
八、标前会议将在__________ (时间)__________ (地址)召开。
【XX】投标者XX一、工程概述(根据具体情况写)二、资金来源(一)中华人民共和国向世界银行(以下简称IFI)申请一笔贷款,用以支付 _________ 工程。
其中部分贷款将用于支付此合同工程。
只有应中国政府的要求,根据贷款协议的条件,IFI才会同意付款。
除中国外,任何组织不能从贷款协议中获得权利或取得贷款。
(二)世行贷款只用于支付瑞士和与中国有商贸关系世行成员国生产的产品和提供的服务。
(三)世行贷款不足的部分将由业主用中国政府提供的资金支付。
三、资格要求(一)所有根据世行的“采购指导原则”具有资格的国家均可投标。
(二)本合同项下的一切货物、服务均应来自上述具有资格的国家。
本合同项下的一切开支仅限于支付这样的货物和服务。
(三)货物、服务来源地与投标者国籍含义不同。
国际工程招标说明书格式(中英文)

国际工程招标说明书格式(附英文)日期:合同招标一、中华人民共和国从世界银行申请获得贷款,用于支付_____项目的费用。
部分贷款将用于支付工程建筑、____等各种合同。
所有依世界银行指导原则具有资格的国家,都可参加招标。
二、中国__公司(以下简称A公司)邀请具有资格的投标者提供密封的标书,提供完成合同工程所需的劳力、材料、设备和服务。
三、具有资格的投标者可从以下地址获得更多的信息,或参看招标文件:中国A公司(地址)四、每一位具有资格的投标者在交纳_____美元(或人民币),并提交书面申请后,均可从上述地址获得招标文件。
五、每一份标书都要附一份投标保证书,且应不迟于_____(时间)提交给A公司。
六、所有标书将在_____(时间)当着投标者代表的面开标。
七、如果具有资格的国外投标者希望与一位中国国内的承包人组建合资公司,需在投标截止日期前30天提出要求。
业主有权决定是否同意选定的国内承包人。
八、标前会议将在_____(时间)_____(地址)召开。
投标者须知一、工程概述(根据具体情况写)二、资金来源(一)中华人民共和国向世界银行(以下简称IFI)申请一笔贷款,用以支付_____工程。
其中部分贷款将用于支付此合同工程。
只有应中国政府的要求,根据贷款协议的条件,IFI才会同意付款。
除中国外,任何组织不能从贷款协议中获得权利或取得贷款。
(二)世行贷款只用于支付瑞士和与中国有商贸关系世行成员国生产的产品和提供的服务。
(三)世行贷款不足的部分将由业主用中国政府提供的资金支付。
三、资格要求(一)所有根据世行的“采购指导原则”具有资格的国家均可投标。
(二)本合同项下的一切货物、服务均应来自上述具有资格的国家。
本合同项下的一切开支仅限于支付这样的货物和服务。
(三)货物、服务来源地与投标者国籍含义不同。
(四)为说明自己有资格中标,投标者应向业主提供(一)所规定的证明,保证有效地执行合同。
为此,业主和中国A公司在公布中标者前,可要求投标者更新其先前提供的资格证明材料。
国际工程招标说明书格式English

国际工程招标说明书格式English————————————————————————————————作者:————————————————————————————————日期:211. INVITATION TO TENDERWhole Doc.Date:Tender No.1. The People's Republic of China has-applied for a loan and creditfrom the World Bank towards the cost of ________________ Project. It is intended that part of the proceeds of this loan and credit will be appliedto eligible payment under various contracts for ____________ , __________, __________. Tendering is open to all tenderers from eligible source countries as defined under the "Guidelines for procurement" of the World Bank.2. ___________ Company now invites sealed tenders from pre-qualified tenderers for provision of the necessary labour, materials, equipment and services for the construction and completion of the project.3. Pre-qualified tenderers may obtain further information from, andinspect the tender documents at the office of: ________.4. A complete set of tender documents may be obtained by anypre-qualified tenderer for the cost of RMB _________ or US $ ___________ on the submission of a written application to the above.5. All tenders must be accompanied by a Tender Security in anacceptable form and must be delivered to ________ Company at theabove-mentioned address (refer to Item 3) on or before ___________.6. Tenders will be opened in the presence of those tenderers' representatives who choose to attend at ____________ (time).7. If a prequalified foreign tenderer wishes to form Joint venturewith a domestic contractor, such a request will be considered if received within ______ days before the closing date for submission of tenders. The selected local contractor shall be subject to approval by the Employer.8. The Pre-Tender Meeting will be held on __________ at the following address: _________.Instructions to TenderersGeneral1. Description of Works (sketch)All tenderers shall have equal access for supply of domestic labourand material.The Contractor shall make his own arrangements for the procurement of local labour, materials, transportation and other services.The Employer will assist Contractor in locating potential number of suppliers for local labour, materials. The Employer will also assist thecontractor in making his own arrangement for supply of fuel and explosives.2. Source of Funds2.1 The People's Republic of China has applied for a loan and creditfrom the World Bank (hereinafter referred to as the IFI) towards the costof ____________ Project, and intends to apply a portion of the proceeds of the loan and credit to eligible payments under the Contract for whichthese documents are issued. Payment by the IFI will be made only at the request of the Chinese Government and upon approval by the IFI and will be subject in all respects to the terms and conditions of the Loan Agreement. No party other than the People's Republic of China shall derive any rights from the Loan Agreement or have any claim to the loan proceeds.2.2 Payment from the proceeds of the World Bank Loan will be limitedto goods produced in, and services supplied from, Switzerland and the member countries of the World Bank which have commercial relations with China.2.3 All costs not met by the IFI Loan will be paid by the Employerfrom funds allocated by the Government of China.3. Eligibility and Qualification Requirements3.1 This tender is open to all pre-qualified tenderers from eligiblesource countries as defined under the "Guidelines for Procurement" of the world Bank.3.2 All goods and services to be supplied under this Contract shallhave their origin in eligible source countries, and all expenditures made under the Contract will be limited to such goods and services.3.3 The origin of goods and services is distinct from the nationalityof the tenderer.3.4 To be eligible for award of contract, tenderers shall haveprovided evidence satisfactory to the Employer of their eligibility under clause 3.1 above, and of their capability and adequacy of resources to effectively carry out the Contract. To this end, the Employer and____________ company may, at any time prior to award of contract, request tenderers to amplify or update previously submitted prequalification data. All Tenders submitted shall include the following information:(a) copies of original documents defining the constitution or legalstatus, place of registration and principal place of business of the company, firm or partnership or, if a joint venture, of each party thereto constituting the tenderer;(b) the qualifications and experience of key personnel proposed for administration and execution of the Contract, both on and off site, in the format prescribed in Schedule V;(c) major items of constructional plant and equipment proposed for usein carrying out the Contract in the format prescribed in Schedule IV; (d) a list of proposed sub-contractors in the format prescribed in Schedule VI;(e) information regarding any current litigation in which the tendereris involved;(f) the details of the construction methods proposed.3.5 For the purposes of sub-clause 3.4, tenderers who have beenpre-qualified may update and augment the information supplied with their application for pre-qualification, and, in particular, shall give particulars of work in hand at the date of tendering.3.6 Tenders submitted by a joint venture of two or more firms as partners shall comply with the following requirements:(a) the tender, and in case of a successful tender the Form of Agreement, shall be signed so as to be legally binding on all partners; (b) one of the Joint Venture members shall be nominated as sponsor;and this authorisation shall be evidenced by submitting a power of attorney signed by legally authorised signatories of all the members of the joint venture;(c) the joint venture sponsor shall be authorised to incur liabilitiesand receive instructions for and on behalf of any and all members of the joint venture and the entire execution of the Contract including payment shall be done exclusively with the joint venture sponsor;(d) all members of the joint venture shall be liable jointly andseverally for the execution of the Contract in accordance with the Contract terms, and a relevant statement to this effect shall be includedin the authorisation mentioned under (b) above as well as in the Form of Tender and the Form of Agreement (in case of a successful tender); and (e) a copy of the agreement entered into by the joint venture partners shall be submitted with the tender.3.7 Domestic tenderers or combinations or joint ventures of domestic and foreign tenderers applying for eligibility for the application of a_____% margin of preference in the comparison of their tender with other tenders shall supply all information required to satisfy the criteria for eligibility as described in Clause 29 of these Instructions.4. Cost of TenderingThe tenderer shall bear all costs associated with the preparation and submission of his tender and neither the Employer nor his agent___________ Company will in any way be responsible or liable for those costs, regardless of the outcome of the tendering process.5. Site Visit5.1 The tenderer is advised to visit and examine the Site of the Worksand the surroundings and to obtain for himself on his own responsibility,all information that may be necessary for preparing the tender andentering into a contract. The costs of visiting the site shall be at thetenderer's own expense.5.2 Arrangements for a visit to site, including transportation and accommodation. will be made by the Employer or his agent _________ Company and will be advised to tenderers at the pre- tender meeting, details ofwhich are given in Clause 16 of these Instructions to Tenderers.,5.3 The tenderer and any of his representatives will be grantedpermission by the Employer or his agent ___________ company to enter uponits premises and lands for the purpose of such inspection by prior arrangement, but only upon the express condition that the tenderer and his representatives, will release and indemnify the Employer or his agent___________ Company and its personnel from and against all liability in respect thereof and will be responsible for personal injury (whether fatalor otherwise), loss of or damage to property and any other loss, damage,costs and expenses however caused, which, but for the exercise of such permission, would not have arisen.Tender documents6. Content of Tender documents6.1 The set of documents issued to pre-qualified tenderers for thepurpose of tendering will cost RMB_______ or US $ ______ and will include the stated number of copies of the following:Number of copies Description1 V olume 1 Instructions to TenderersConditions of Contract:Part I--GeneralPart II--Conditions of ParticularApplication1 V olume2 Specification(incl. list of Drawings)3 V olume 3 Form of Tender and Appendix theretoForm of Tender SecurityBill of QuantitiesSchedules of Supplementary Information1 V olume 4 Drawings6.2 Tender documents shall include any addenda issued prior to theclosing date of tenders in accordance with Clause 8 and any minutes ofpre-tender meetings issued in accordance with Clause 16 of theseInstructions to Tenderers.6.3 Further copies of the documents may be purchased by pre-qualified tenderers for a non-refundable fee as follows: (sketch)6.4 Sub-contractors, manufacturers, suppliers and others who require copies of the documents shall not request them directly from _____________ but shall obtain them only from pre-qualified tenderers.6.5 On return of the documents in an undamaged and useable condition, either as part of a tender or otherwise, within the specified time limits,the tenderer's pre-qualification fee will be refunded, as follows:(a) Tender submitted: _________________% refund of fee(b) Tender not submitted but ________________% refund of fee documents returned prior to closing date of tender6.6 The tenderer is expected to examine carefully all instructions, conditions, forms, terms, specifications and drawings in the tender documents. Failure to comply with the requirements of the Instructions to Tenderers will be at the tenderer's own risk. Tenders which are not substantially responsive to the requirements of the tender documents maybe rejected.6.7 The four volumes of the tender documents have been collated and bound by mechanical means and tenderers should check to ensure that they contain all pages (which are numbered consecutively) and that all supplements referred to are also included.7. Clarification of Tender documents7.1 A Prospective tenderer requiring any clarification of the tender documents may notify ___________ in writing or by telex at the following address: __________.The Employer or his agent _____________ will respond in writing to any request for clarification which is received more than _____ days prior tothe deadline for submission of tenders. Written copies of the response (including an explanation of the query, but without identifying the sourceof the inquiry) will be sent to all prequalified tenderers who have been issued with tender documents.8. Amendment of Tender documents8.1 Prior to the deadline for submission of tenders, the Employer may,for any reason, whether at its own initiative or in response to a clarification requested by a prospective tenderer, modify the tender documents by the issue of an Addendum.8.2 The Addendum will be sent in writing or by telex or telegram toall pre-qualified tenderers who have picked up the tender documents andwill be binding upon them. Prospective tenderers shall promptly acknowledge receipt thereof by telex or telegram to ____________.8.3 In order to afford prospective tenderers reasonable time in whichto take an Addendum into account in preparing their tenders, the Employer or his agent _________ may, at their discretion, extend the deadline forthe submission of tenders in accordance with Clause 19 hereof.Preparation of Tenders9. Language of Tender9.1 The tender and all correspondence relating to the tender exchangedby the tenderer and the Employer or his agent __________ shall be in English. Supporting documents and printed literature furnished by the tenderer with the tender may be in another language provided they are accompanied by an appropriate English translation of pertinent passages. For the purpose of interpretation of the tender, the English version shall prevail.10. documents Comprising the Tender10.1 The tender to be Prepared by the tenderer shall contain the following:the Form of Tender and Appendix thereto;the Tender Security;the priced Bill of Quantities;the Schedules of Supplementary Information;the information on eligibility and qualifications;alternative offers, if any; andany other information required to be submitted in accordance withthese Instructions.The Forms, Bill of Quantities and Schedules provided in V olume 3 of these documents shall be used without exception (subject to extensions of the Schedules in the same format, and to the provisions of Clause 14.2 hereof regarding the alternative forms of tender security).10.2 All documents issued for the purpose of tendering as described in Clause 6.1 and addenda issued in accordance with Clause 8 shall be deemed incorporated in the tender. Tender documents not required to be signed and submitted in accordance with Clauses 17 and 18 shall be returned to the office of issue before the expiry of the tender validity period, but mustnot be enclosed with the Tender.10.3 Tenderers shall submit with their tender a preliminary Programmein the format required by Clause 14 of the Conditions of Contract.10.4 The successful tenderer will be required to revise or augment his Programme as set out in the Contract.11. Tender Prices11.1 Unless explicitly stated otherwise in the tender documents, the Contract shall be for the whole of the Works ______ as described in Clause 1 hereof, based on the schedules of unit rates and amounts submitted by the tenderer.11.2 The tenderer shall fill in rates and amounts for all items ofwork described in the Bill of Quantities, whether quantities are stated ornot. Items against which no rate or amount is entered by the tenderer will not be paid for by the Employer when executed and shall be deemed covered by the other rates and amounts entered in the Bill of Quantities.11.3 All duties, taxes and other levies payable by the Contractorunder the Contract, or for any other cause, as at the date ________ days prior to the date for submission of tenders shall be included in the ratesand amounts and total tender sum submitted by the tenderer, and the evaluation and comparison of tenders by the Employer shall be made accordingly.11.4 The rates and amounts entered by the tenderer shall be subject to adjustment during the performance of the Contract in accordance with the provisions of the Conditions of Contract. The tenderer shall complete Schedule III-Price Adjustment Provisions and shall submit with his tender such other supporting information as is required under Clause 70 of the Conditions of Contract.12. Currencies of Tender and Payment12.1 The unit rates and prices shall be quoted by the tender entirelyin RMB. A tenderer expecting to incur expenditures in other currencies for inputs to the Works supplied from outside China (referred to as "the foreign currency requirements") shall indicate in Schedule I of "Foreign Currency Requirements" the percentage of the Tender Price (excluding Provisional Sums) needed by him for the payment of such foreign currency requirements either (i) entirely in the currency of the tenderer's home country or, at the tenderer's option, (ii) entirely in US dollars, always provided that a tenderer expecting to incur expenditures in a currency or currencies other than those stated in (i) and (ii) above for a portion ofthe foreign currency requirements, and wishing to be paid accordingly, shall so indicate the percentage portion in his tender. The percentage portion indicated shall remain fixed for the duration of the Contract. The amounts in various currencies calculated on the basis of the percentages indicated in the Tender and by use of the exchange rates indicated in subclause 12.2 hereinafter, shall be used for the purpose of conversionand comparison of tenders pursuant to Clause 70.12.2 The rates of exchange to be used by the tenderer for currency conversion shall be the governing selling rates published by the Bank of China on the date ______ day prior to the latest date for the submissionof tenders. If exchange rages are not so published for certain currencies,the tenderer shall state the rates used and the source. For the purpose of payments, the exchange rates used in tender preparation shall apply forthe duration of the Contract.12.3 The total amount of foreign and local currencies expected to be required by tenderers shall be substantiated in Schedules I and I(A)-Foreign Currency and Local Currency Requirements, and the annexthereto, Tenderers shall describe the manner in which such foreign and local currencies are expected to be used, relating specifically, but not limited to:Foreign Currency(a) Expatriate staff directly employed on the Works:(b) social charges, insurance premiums and medical care related tosuch staff, and travel expenses between China and the country of origin; (c) a list of the imported materials, both temporary and permanent, required for the Works;(d) depreciation and usage of plant and equipment, including spareparts, required for the Works;(e) insurance and freight charges for imported materials, plant and equipment, including spare parts; and(f) overhead expenses, fees and financial charges incurred outsideChina.Local Currency(g) local labour;(h) local materials;(i) other services, and;(j) overhead expenses, fees and financial charges within China.12.4 Tenderers may be required by the Employer to clarify theirforeign currency requirements, and to provide satisfactory proof that the amounts included in the unit rates and in Schedule I are reasonable and responsive to sub-clause 12.1 hereof.12.5 The tender shall complete Schedule II - Estimated Contract Payments and shall substantiate the tabulation of this Schedule by attaching a table indicating anticipated major quantities of work performed over the duration of the Works.13. Tender Validity13.1 The tender shall remain valid and open for acceptance for aperiod of six calendar months from the specified date of tender closing. 13.2 In exceptional circumstances, prior to expiry of the originaltender validity period, the Employer or his agent ____________ may request the tenderers for a specified extension to the period of validity. The request and the responses thereto shall be made in writing or by telex or telegram. A tenderer may refuse the request without forfeiting his tender security. A tenderer agreeing to the extension will not be required nor permitted to alter his tender, but will be required to extend the validityof his tender security correspondingly. The provisions of Clause 14 hereof regarding discharge and forfeiture of tender security shall continue toapply during the extended period.14. Tender Security14.1 The tenderer shall furnish, as part of his tender, a tendersecurity in RMB Yuan in an amount of not less than _____ % of the Tender Sum.14.2 The tender security shall, at the tenderer's option, be in theform of a certified cheque, a bank draft, an irrevocable letter of creditor a guarantee from either:(a) Bank of China;(b) any of its correspondent bank abroad through Bank of China;(c) any other Chinese or foreign bank operating in China;(d) any other foreign bank determined by the Tenderer in advance of submission of bids to be acceptable to ___________.or a bond issued by an insurance company or bonding company likewise located. The format of the bank guarantee or bond shall be in accordance with one of the sample forms included in these documents; other formats may be permitted subject to the prior approval of the Employer or his agent __________. Letters of credit, bank guarantees and tender bonds shall be valid for one calendar month beyond the validity of the tender. 14.3 In the event of a Tenderer agreeing to a specified extension of tender validity in accordance with Clause 13 of the Instructions to Tenderers, the Tenderer shall Provide an extension in the validity of the tender security of one calendar month beyond the validity of the extended tender.14.4 Any tender not accompanied by an acceptable tender security willbe rejected by _________ as non-responsive.14.5 The tender securities of unsuccessful tenderers will bedischarged or returned as promptly as possible, but not later than ______ days after the expiration of the period of tender validity prescribed.14.6 The tender security of the successful tenderer will be dischargedor returned upon the tenderer executing the Contract and furnishing the required performance security.14.7 The tender security may be forfeited:(a) if a tenderer withdraws his tender during the period of tender validity; or(b) in the case of the successful tenderer, if he fails to:(i) sign the Agreement; or(ii) furnish the necessary performance security.15. Alternative Offers15.1 The tenderer shall submit a basic tender which complies fullywith the requirements of the tender documents. The tenderer may, at his option, and in addition to the basic tender, offer tenders incorporating alternatives to any of the following items now specified:(a) Advance Loan for MobilisationAn interest free advance loan will be made available to assist theContractor before commencing construction of the Works. Offers may be made for such a loan of up to ________% of the Tender Sum. Evaluation will be made of the associated costs or savings accruing to the Employer in accordance with Clause 28.(b) (written as specific conditions).15.2 Alternatives may be submitted in addition to basic tender. Inorder for alternatives to be considered in the process of tenderevaluation, each alternative shall be accompanied by a detailed price breakdown indicating the tenderer's estimate of the additional or reducedcost in present value to the Employer (refer to subclause 28.3 hereof) compared to the basic Tender Sum. Comparison and evaluation will be donefor the basic offer and alternatives of the lowest evaluated tenderer willbe given due consideration. If the alternative offers were to be acceptedby the Employer, these will be incorporated into the Contract. Alternative offers which are not priced, or which are not substantiated in sufficient detail, will be rejected.15.3 Offers of technical alternatives shall be accompanied by allinformation necessary for a complete evaluation, including design calculations, drawings, method statements and specifications for materialsand workmanship where the alternative is not covered by the Specification, together with a breakdown of the alternative prices and the TotalAlternative Contract Sum.15.4 Only those alternative offers which appear to provide additional financial, economic or technical benefits over the basic offer will be considered by the Employer in tender evaluation (refer to Clause 28).16. Pre-Tender Meeting16.1 The tenderer or his official representative is advised to attenda pre-tender meeting which will convene on ______________at ___________ at the ___________.16.2 The purpose of the meeting will be to clarify issues and toanswer questions on any matter that may be raised at that stage and toallow tenderers to inspect the Site and to examine conditions.16.3 Tenderers are requested to submit any questions in writing or bytelex or telegram, to reach__________ not later than one week before the meeting.16.4 Minutes of the meeting, including copies of the questions raisedand responses given, will be furnished expeditiously to all thoseattending the meeting, and subsequently to all pre-qualified tenderers who have picked up the tender documents. Any modification of the tender documents listed in sub-clause 6.1 which may become necessary as a resultof the pre-tender meeting shall be made by the Employer or his agent___________ exclusively through the issue of an Addendum pursuant to Clause 8, and not through the minutes of the pre-tender meeting.17. Format and Signing of Tenders17.1 The tenderer shall prepare one original and two duplicate copiesof the documents comprising the tender as described in Clause 10.1 hereof, bound within the V olume 3, and clearly marked "Original Tender" and "Duplicate Tender" as appropriate. In the event of any discrepancy between them, the original shall prevail.17.2 The original and two duplicate copies of the tender shall betyped or written in indelible ink and shall be signed by a person or persons duly authorised to bind the tenderer to the Contract. Proof of authorisation shall be furnished in the form of a written Power of Attorney which shall accompany the tender. All pages of the tender where entries or amendments have been made shall be initialled by the person or persons signing the tender.17.3 The complete tender shall be without alterations, interlineationsor erasures, except those to accord with the instructions of any Agenda issued, or as necessary to correct errors made by the tenderer, in which case such corrections shall be initialled by the person or persons signing the tender.17.4 Only one tender may be submitted by each tenderer, not including alternative offers submitted pursuant to Clause 15 hereof. No tenderer may participate in the tender of another for the same contract in any relation whatsoever.18. Sealing and Marking of Tenders18.1 The tenderer shall seal the original and two duplicate tenderseach in an inner and an outer envelope, duly marking the envelopes as "Original" and "Duplicate".18.2 The inner and outer envelopes shall:(a) be addressed to _________. (address of employer's agent)(b) bear the following details:(i) Tender for Construction of Contract _________;(ii) _________ Project;(iii) "Do not open before __________."18.3 The inner envelopes shall bear the name and address of thetenderer to enable the tender to be returned unopened in case it is declared late. The outer envelope shall not bear any identification of the tenderer.18.4 If the outer envelope is not marked as instructed above,_________ Company will assume no responsibility for the misplacement or premature opening of the tender. A tender opened prematurely for this cause will be rejected by the Employer or his agent ___________ and returned to the tenderer.19. Deadline for Submission of Tenders19.1 Tenders must be received by ______________ at the address specified above no later than _________.19.2 The Employer or his agent __________ Company may, at their discretion, on giving not less than ________ calendar days notice by telexor telegram to all pre-qualified tenderers who have picked up the tender documents, extend the deadline for the submission of tenders by issuing an Addendum in accordance with Clause 8, in which case all rights and obligations of the Employer and the tenderers previously subject to the deadline shall thereafter be subject to the new deadline as extended.20. Late TendersAny tender received by ___________ Company after the prescribed deadline for submission of tenders will be returned unopened.21. Modification and Withdrawal of Tenders21.1 The tenderer may modify or withdraw his tender after submission, provided that the modification or notice of withdrawal is received in writing by __________ Company prior to the prescribed deadline for submission of tenders.21.2 The tenderer's modification or notice of withdrawal shall be prepared, sealed, marked and despatched in accordance with the provisions for the submission of tenders. A notice of withdrawal may also be sent by telex or telegram, but shall be followed by a signed confirmation copy, postmarked not later than the deadline for submission of tenders.21.3 Subject to Clause 24 hereof, no tender may be modified subsequentto the deadline for submission of tenders.21.4 Withdrawal of a tender during the interval between the deadlinefor submission of tenders and the expiration of the period of tendervalidity may result in the forfeiture of tender security pursuant toClause 14.Tender Opening and Evaluation22. Tender Opening22.1 The Employer or his agent __________ will open the tenders, inthe presence of tenderers' representatives who choose to attend, at___________ on _______________ at the offices of __________. Tenderers' representatives who are present shall sign a register evidencing their attendance.22.2 Tenders for which an acceptable notice of withdrawal has been submitted pursuant to Clause 21 hereof shall not be opened. The Employer or his agent ___________ will examine the tenders to determine whether they are complete, whether the requisite tender securities have been。
中英文对照:国际工程招标说明书

中英文对照:国际工程招标说明书International Engineering Tender Document一、准备阶段:Preparation Stage1.1 项目背景:Project Background本项目旨在招标承包国际工程项目,为方便国外企业参与竞标,特制定该说明书。
This project ms to tender for international engineering projects. In order to facilitate the participation of foreign companies in bidding, this document has been prepared.1.2 招标范围:Scope of Tender本次招标范围涵盖工程设计、设备采购、施工监理等一系列工程活动。
The scope of this tender includes a series of engineering activities such as engineering design, equipment procurement, and construction supervision.1.3 报名资格:Qualifications for Registration参与本次招标的企业需要具备相关工程承包资质,并符合招标文件中规定的报名条件。
Companies participating in this tender need to have relevant engineering contracting qualifications and meet the registration requirements specified in the tender documents.二、招标阶段:Tender Stage2.1 发布公告:Publication of Announcement在合适的媒体上发布招标公告,宣布招标活动的开始,并提供有关文件的获取方式。
国际工程招标说明书

温馨提示:本资料适用于约定双方经过谈判,协商而共同承认,共同遵守的责任与义务,仅供参考!^_&本WORD文档可修改,不需要的部分直接删除,使用时请详细阅读内容!国际工程招标说明书4. A complete set of tender documents may be obtained by anypre-qualified tenderer for the cost of RMB _________ or US $ ___________on the submission of a written application to the above.5. All tenders must be accompanied by a Tender Security in an acceptable form and must be delivered to ________ Company at the above-mentioned address (refer to Item 3) on or before ___________.6. Tenders will be opened in the presence of those tenderers' representatives who choose to attend at ____________ (time).7. If a prequalified foreign tenderer wishes to form Joint venturewith a domestic contractor, such a request will be considered if received within ______ days before the closing date for submission of tenders. Theselected local contractor shall be subject to approval by the Employer. 8. The Pre-Tender Meeting will be held on __________ at the following address: _________.Instructions to Tenderers签订地点:__________________________________证明人:_________第1页共1页。
国际工程招标说明书中英对照

国际工程招标说明书日期:合同招标一、中华人民共和国从世界银行申请获得贷款,用于支付_____项目的费用。
部分贷款将用于支付工程建筑、____等各种合同。
所有依世界银行指导原则具有资格的国家,都可参加招标。
二、中国__公司(以下简称A公司)邀请具有资格的投标者提供密封的标书,提供完成合同工程所需的劳力、材料、设备和服务。
三、具有资格的投标者可从以下地址获得更多的信息,或参看招标文件:中国A公司(地址)四、每一位具有资格的投标者在交纳_____美元(或人民币),并提交书面申请后,均可从上述地址获得招标文件。
五、每一份标书都要附一份投标保证书,且应不迟于_____(时间)提交给A公司。
六、所有标书将在_____(时间)当着投标者代表的面开标。
七、如果具有资格的国外投标者希望与一位中国国内的承包人组建合资公司,需在投标截止日期前30天提出要求。
业主有权决定是否同意选定的国内承包人。
八、标前会议将在_____(时间)_____(地址)召开。
投标者须知一、工程概述(根据具体情况写)二、资金来源(一)中华人民共和国向世界银行(以下简称IFI)申请一笔贷款,用以支付_____工程。
其中部分贷款将用于支付此合同工程。
只有应中国政府的要求,根据贷款协议的条件,IFI才会同意付款。
除中国外,任何组织不能从贷款协议中获得权利或取得贷款。
(二)世行贷款只用于支付瑞士和与中国有商贸关系世行成员国生产的产品和提供的服务。
(三)世行贷款不足的部分将由业主用中国政府提供的资金支付。
三、资格要求(一)所有根据世行的“采购指导原则”具有资格的国家均可投标。
(二)本合同项下的一切货物、服务均应来自上述具有资格的国家。
本合同项下的一切开支仅限于支付这样的货物和服务。
(三)货物、服务来源地与投标者国籍含义不同。
(四)为说明自己有资格中标,投标者应向业主提供(一)所规定的证明,保证有效地执行合同。
为此,业主和中国A公司在公布中标者前,可要求投标者更新其先前提供的资格证明材料。
国际工程招标说明书-INVITATION-TO-TENDER

国际工程招标说明书国际工程招标说明书合同招标一、中华人民共和国从世界银行申请获得贷款,用于支付_____项目的费用。
部分贷款将用于支付工程建筑、____等各种合同。
所有依世界银行指导原则具有资格的国家,都可参加招标。
二、中国__公司(以下简称A公司)邀请具有资格的投标者提供密封的标书,提供完成合同工程所需的劳力、材料、设备和服务。
三、具有资格的投标者可从以下地址获得更多的信息,或参看招标文件:中国A公司(地址)四、每一位具有资格的投标者在交纳_____美元(或人民币),并提交书面申请后,均可从上述地址获得招标文件。
五、每一份标书都要附一份投标保证书,且应不迟于_____(时间)提交给A公司。
六、所有标书将在_____(时间)当着投标者代表的面开标。
七、如果具有资格的国外投标者希望与一位中国国内的承包人组建合资公司,需在投标截止日期前30天提出要求。
业主有权决定是否同意选定的国内承包人。
八、标前会议将在_____(时间)_____(地址)召开。
【章名】投标者须知一、工程概述(根据具体情况写)二、资金来源(一)中华人民共和国向世界银行(以下简称IFI)申请一笔贷款,用以支付_____工程。
其中部分贷款将用于支付此合同工程。
只有应中国政府的要求,根据贷款协议的条件,IFI才会同意付款。
除中国外,任何组织不能从贷款协议中获得权利或取得贷款。
(二)世行贷款只用于支付瑞士和与中国有商贸关系世行成员国生产的产品和提供的服务。
(三)世行贷款不足的部分将由业主用中国政府提供的资金支付。
三、资格要求(一)所有根据世行的摬晒褐傅荚驍具有资格的国家均可投标。
(二)本合同项下的一切货物、服务均应来自上述具有资格的国家。
本合同项下的一切开支仅限于支付这样的货物和服务。
(三)货物、服务来源地与投标者国籍含义不同。
(四)为说明自己有资格中标,投标者应向业主提供(一)所规定的证明,保证有效地执行合同。
为此,业主和中国A公司在公布中标者前,可要求投标者更新其先前提供的资格证明材料。
中英版水利工程招标书

一、项目概况项目名称:XX地区水利工程项目项目地点:XX省XX市XX县项目规模:本项目总投资约为XX亿元人民币,主要建设内容包括:1. 新建水库1座,总库容XX万立方米。
2. 改扩建中型河道XX公里,新增防洪面积XX平方公里。
3. 建设提水泵站XX座,设计流量XX立方米/秒。
4. 建设灌溉渠道XX公里,新增灌溉面积XX平方公里。
5. 配套建设供水、排水、电力、通讯等附属设施。
项目业主:XX地区水利局招标范围:本项目包括工程设计、施工、设备采购、安装调试及售后服务等全部工作。
招标方式:公开招标招标时间:自招标公告发布之日起至投标截止日止。
投标截止时间:XX年XX月XX日投标地点:XX地区水利局招标办公室二、投标人资格要求1. 具有独立法人资格,注册资金不低于人民币XX万元。
2. 具有水利工程施工总承包壹级及以上资质。
3. 具有良好的财务状况和履约信誉,无不良记录。
4. 具有类似工程业绩,近五年内完成过类似规模的水利工程至少1项。
5. 具有完善的质量管理体系和安全生产管理制度。
三、投标文件要求1. 投标人须按照招标文件要求编制投标文件,包括但不限于以下内容:- 投标函- 法人代表授权委托书- 企业资质证书副本- 资质证书副本- 财务报表- 业绩证明文件- 人员配备情况- 施工组织设计- 质量保证措施- 安全生产措施- 评标办法及报价说明2. 投标文件必须密封,并在封口处加盖投标人公章。
四、评标办法1. 评标委员会根据招标文件要求,对投标文件进行评审,包括技术评审和商务评审。
2. 技术评审主要考察投标人的技术实力、施工组织设计、质量保证措施、安全生产措施等。
3. 商务评审主要考察投标报价、工期、售后服务等。
五、合同签订1. 评标结束后,招标人将向中标人发出中标通知书。
2. 中标人应在接到中标通知书后XX日内与招标人签订合同。
六、其他1. 本招标文件未尽事宜,按国家有关法律法规执行。
2. 投标人应严格按照招标文件要求进行投标,否则将承担相应的法律责任。
国际工程招标说明书格式中英对照

国际工程招标说明书格式(中英对照)日期:合同招标一、____(招标单位)从____银行申请获得贷款,用于支付_____项目的费用。
部分贷款将用于支付工程建筑、____等各种合同。
所有具有资格的企业,都可参加投标。
二、____公司(以下简称A公司)邀请具有资格的投标者提供密封的标书,提供完成合同工程所需的劳力、材料、设备和服务。
三、具有资格的投标者可从以下地址获得更多的信息,或参看招标文件:A公司:(地址):四、每一位具有资格的投标者在交纳_____美元(或人民币),并提交书面申请后,均可从上述地址获得招标文件。
五、每一份标书都要附一份投标保证书,且应不迟于_____(时间)提交给A公司。
六、所有标书将在___(时间)当着投标者代表的面开标。
七、如果具有资格的国外投标者希望与一位中国国内的承包人组建合资公司,需在投标截止日期前30天提出要求。
业主有权决定是否同意选定的国内承包人。
八、标前会议将在___(时间)___(地址)召开。
投标者须知一、工程概述(根据具体情况写):二、资金来源:(一)A公司向___银行申请一笔贷款,用以支付_____工程。
其中部分贷款将用于支付此合同工程。
只有应______的要求,根据贷款协议的条件,才会同意付款。
除外,任何组织不能从贷款协议中获得权利或取得贷款。
(二)______银行贷款只用于支付与______有商贸关系的成员生产的产品和提供的服务。
(三)______银行贷款不足的部分将由业主用______提供的资金支付。
三、资格要求(一)所有根据 ______银行的"采购指导原则"具有资格的成员均可投标。
(二)本合同项下的一切货物、服务均应来自上述具有资格的成员。
本合同项下的一切开支仅限于支付这样的货物和服务。
(三)货物、服务来源地与投标者国籍含义不同。
(四)为说明自己的中标资格,投标者应向业主提供______规定的证明,保证有效地执行合同。
为此,业主和A公司在公布中标者前,可要求投标者更新其先前提供的资格证明材料。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
INVITA TION TO TENDERDate:Tender No.1. The People's Republic of China has-applied for a loan and creditfrom the World Bank towards the cost of ________________Project.It isintended that part of the proceeds of this loan and credit will be appliedto eligiblepayment under various contracts for ____________ ,__________,__________. Tendering is open to all tenderers from eligible sourcecountries as definedunder the “Guidelines for procurement” of the WorldBank.2. ___________ Company now invites sealed tenders from pre-qualifiedtenderers for provision of the necessary labour,materials,equipment andservices for the construction and completion of the project.3. Pre-qualified tenderers may obtain further information from,andinspect the tender documents at the office of:________.4. A complete set of tender documents may be obtained by anypre-qualified tenderer for the cost of RMB _________ or US$___________on the submission of a written application to the above.5. All tenders must be accompanied by a T ender Security in anacceptable form and must be delivered to________Company at theabove-mentioned address on or before ___________.6. Tenders will be opened in the presence of those tenderers'representatives who choose to attend at ____________ 。
7. If a prequalified foreign tenderer wishes to form Joint venturewith a domestic contractor,such a request will be considered if receivedwithin ______ days before the closing date for submission of tenders.Theselected local contractor shall be subject to approval by the Employer.8. The Pre-Tender Meeting will be held on __________ at the followingaddress:_________.Instructions to TenderersGeneral1. Description of WorksAll tenderers shall have equal access for supply of domestic labourandmaterial.The Contractor shall make his own arrangements for the procurement oflocal labour,materials,transportation and other services.The Employer will assist Contractor in locating potential number ofsuppliers for local labour,materials. The Employer will also assist thecontractor in making his own arrangement for supply of fuel andexplosives.2. Source of Funds2.1 The People's Republic of China has applied for a loan and creditfrom the World Bank towards the costof ____________ Project,and intends to apply a portion of the proceeds ofthe loan and credit to eligible payments under the Contract for whichthese documentsare issued. Payment by the IFI will be made only at therequest of the Chinese Government and upon approval by the IFI and will besubject in all respectsto the terms and conditions of the Loan Agreement.No party other than the People's Republic of China shall derive any rightsfrom the Loan Agreement or haveany claim to the loan proceeds.2.2 Payment from the proceeds of the World Bank Loan will be limitedto goods produced in,and services supplied from,Switzerland and themember countries of the World Bank which havecommercial relations withChina.2.3 All costs not met by the IFI Loan will be paid by the Employerfrom funds allocated by the Government of China.3. Eligibility and Qualification Requirements3.1 This tender is open to all pre-qualified tenderers from eligiblesource countries as defined under the “Guidelines for Procurement” of theworld Bank.3.2 All goods and services to be supplied under this Contract shallhave their origin in eligible source countries,and all expenditures madeunder the Contract will be limited to such goods and services.3.3 The origin of goods and services is distinct from the nationalityof the tenderer.3.4 To be eligible for award of contract,tenderers shall haveprovided evidence satisfactory to the Employer of their eligibility underclause 3.1 above,and of their capability and adequacy of resources toeffectivelycarry out the Contract.To this end,the Employer and____________ company may,at any time prior to award of contract,requesttenderers to amplifyor update previously submitted prequalification data.All Tenders submitted sha 「正文」include the following information:copies of original documents defining the constitution or legalstatus,place of registration and principal place of business of thecompany,firm or partnership or,if a joint venture,of each party theretoconstituting the tenderer;the qualifications and experience of key personnel proposed foradministration and execution of the Contract,both on and off site,in theformat prescribed in Schedule V;major items of constructional plant and equipment proposed for usein carrying out the Contract in the format prescribed in Schedule IV;a list of proposed sub-contractors in the format prescribed inSchedule VI;information regarding any current litigation in which the tendereris involved;the details of the construction methods proposed.3.5 For the purposes of sub-clause 3.4,tenderers who have beenpre-qualified may update and augment the information supplied with theirapplication for pre-qualification,and,in particular,shall giveparticularsof work in hand at the date of tendering.3.6 Tenders submitted by a joint venture of two or more firms aspartners shall comply with the following requirements:the tender,and in case of a successful tender the Form ofAgreement,shall be signed so as to be legally binding on all partners;one of the Joint V enture members shall be nominated as sponsor;andthis authorisation shall be evidenced by submitting a power ofattorneysigned by legally authorised signatories of all the members ofthe joint venture;the joint venture sponsor shall be authorised to incur liabilitiesandreceive instructions for and on behalf of any and all members of thejoint venture and the entire execution of the Contract including paymentshall be done exclusively with the joint venture sponsor;all members of the joint venture shall be liable jointly andseverally for the execution of the Contract in accordance with theContract terms,and a relevant statement to this effect shall be includedin the authorisation mentioned under above as well as in the Form ofTender and the Form of Agreement ;anda copy of the agreement entered into by the joint venture partnersshall be submitted with the tender.3.7 Domestic tenderers or combinations or joint ventures of domesticandforeign tenderersapplying for eligibility for the application of a_____% margin of preference in the comparison of their tender with othertenders shall supply all information required to satisfy the criteria foreligibility as described in Clause 29 of these Instructions.4. Cost of TenderingThe tenderer shall bear all costs associated with the preparation andsubmission of his tender and neither the Employer nor his agent___________ Company will in any way be responsible or liable for thosecosts,regardless of the outcome of the tendering process.5. Site Visit5.1 The tenderer is advised to visit and examine the Site of the Worksandthe surroundings and to obtain for himself on his own responsibility,all information that may be necessary for preparing the tender andentering into a contract. The cos ts of visiting the site shall be at thetenderer's own expense.5.2 Arrangements for a visit to site,including transportation andaccommodation. will be made by the Employer or his agent _________ Companyand will be advised to tenderers at the pre- tender meeting,details ofwhich are given in Clause 16 of these Instructions to Tenderers.,5.3 The tenderer and any of his representatives will be grantedpermission by the Employer or his agent ___________ company to enter uponits premises and lands for the purpose of such inspection by priorarrangement,but only upon the express condition that the tenderer and hisrepresentatives,will release and indemnify the Employer or his agent___________ Companyand its personnel from and against all liability inrespect thereof and willbe responsible for personal injury ,loss of or damage to property and any other loss,damage,costs and expenses however caused,which,but for the exercise of suchpermission,would not have arisen.Tender Documents6. Content of Tender Documents6.1 The set of documents issued to pre-qualified tenderers for thepurpose of tendering will cost RMB_______ or US $ ______ and will includethe stated number of copies of the following:Number of copies Description1V olume 1Instructions to Tenderers Conditions of Contract:Part I——GeneralPart II——Conditions of ParticularApplication1V olume 2Specification3V olume 3Form of Tender andAppendix theretoForm of Tender SecurityBill of QuantitiesSchedules of Supplementary Information1V olume 4Drawings6.2 Tender documents shall include any addenda issued prior to theclosing date of tenders in accordance with Clause 8and any minutes ofpre-tender meetings issued in accordance with Clause 16of theseInstructions to Tenderers.6.3 Further copies of the documents may be purchased by pre-qualifiedtenderers for a non-refundable fee as follows:6.4 Sub-contractors,manufacturers,suppliers and others who requirecopies of the documents shall not request them directly from _____________but shall obtain them only from pre-qualified tenderers.6.5 On return of the documents in an undamaged and useable condition,either as part of a tender or otherwise,within the specified time limits,the tenderer's pre-qualification fee will be refunded,asfollows:Tender submitted:_________________% refund of feeTender not submitted but ________________% refund of feedocuments returned prior to closing date of tender6.6 The tenderer is expected to examine carefully all instructions,conditions,forms,terms,specifications and drawings in the tenderdocuments. Failure to comply with the requirements of the Instructions toTenderers wi「正文」be at the tenderer's own risk.Tenders which are notsubstantially responsive to the requirements of the tender documents maybe rejected.6.7 The four volumes of the tender documents have been collated andbound by mechanical means and tenderers should check to ensure that theycontaina「正文」pages and that allsupplementsreferred to are also included.7. Clarification of Tender Documents7.1 A Prospective tenderer requiring any clarification of the tenderdocuments may notify ___________ in writing or by telex at the followingaddress:__________.The Employer or his agent _____________ will respond in writing to anyrequest for clarification which is received more than _____ days prior tothe deadline for submission of tenders. Written copies of the response will be sent to all prequalified tenderers who have beenissued with tender documents.8. Amendment of Tender Documents8.1 Prior to the deadline for submission of tenders,the Employer may,forany reason,whether at its own initiative or in response to aclarification requested by a prospective tenderer,modify the tenderdocuments bythe issue of an Addendum.8.2 The Addendum will be sent in writing or by telex or telegram toallpre-qualified tenderers who have picked up the tender documents andwill bebinding upon them.Prospective tenderers shall promptlyacknowledgereceipt thereof by telex or telegram to ____________.8.3 In order to afford prospective tenderers reasonable time in whichto take an Addendum into account in preparing their tenders,the Employeror his agent _________ may,at their discretion,extend the deadline forthe submission of tenders in accordance with Clause 19 hereof.Preparation of Tenders9. Language of Tender9.1 The tender and all correspondence relating to the tender exchangedby the tenderer and the Employer or his agent__________shall be inEnglish. Supporting documents and printed literature furnished by thetenderer with the tender may be in another language provided they areaccompanied by an appropriate English translation of pertinent passages.For the purpose of interpretation of the tender,the English version shallprevail.10. Documents Comprising the Tender10.1 The tender to be Prepared by the tenderer shall contain thefollowing:the Form of Tender and Appendix thereto;the Tender Security;the priced Bill of Quantities;the Schedules of Supplementary Information;the information on eligibility and qualifications;alternative offers,if any;andany other information required to be submitted in accordance withthese Instructions.The Forms,Bill of Quantities and Schedules provided in V olume3ofthese documents shall be used without exception 。