Ny219862xrejqDIwMTXE6rXay8TG2qOpLbL6xre6z7jx0MXPo
Autodesk Simulation CFD应用在商场火灾安全策略设计中的工程方法说明书
BLD 122076Engineered Approach to Life Safety in a Shopping Mall using Autodesk CFDDr. Munirajulu. MChief Engineering Manager, HVAC-CFD, Engineering Design & Research Center (EDRC), Commercial Buildings & Airports, L&T Construction, Larsen & Toubro LimitedDescriptionThis class covers the use of Autodesk Simulation CFD as a design analysis tool to provide an effective, engineered smoke control strategy for a shopping mall of large and complex geometry. We will examine how fire dynamics was modeled and how important aspects such as smoke propagation and temperature distribution were investigated. The participants will learn about smoke movements in far greater detail than that was possible through traditional design tools. We will demonstrate how the smoke exhaust systems can be designed to maintain a prescribed smoke layer height, tenable temperature and smoke visibility and how the volume of smoke to be exhausted can be optimized to meet life safety goals. Based on the CFD results, we will show how important conclusions can be drawn and valuable recommendations can be introduced to minimize smoke hazards.SpeakerDr. M. Munirajulu, B.Tech and Ph.D. from IIT, Kharagpur, India, has a total of 25 years of experience in R&D and Engineering Services. He has more than 21 years of direct and indirect involvement with CFD technology as a design analysis tool in areas such as HVAC, Automotive, Fluid Handling Equipment, Steam turbines and boilers. He has been with Larsen & Toubro Limited since 2005 and prior to this, he has worked with ABB Limited and Alstom Projects India Limited for about 9 years. He is a member of ISHRAE and professional interests include state of the art CAE technologies (CAD, CFD and FEA). Currently he is working as Chief Engineering Manager, responsible for CFD analysis in the design of safe buildings in L&T Construction, Larsen & Toubro Limited, Chennai. He has been using Autodesk CFD Simulation software for HVAC applications in areas such as thermal comfort, Data Center cooling, basement car park ventilation, DG room ventilation effectiveness, Smoke simulation in buildings in design stage as well as for trouble shooting. He has published 4 nos. of technical papers in international journals of repute and has been a speaker at technical conferences.******************* Learning Objectives• Learn how fire dynamics can be modeled and analyzed • Highlight key results from CFD for life safety assessment • Draw important conclusions and valuable recommendations•Look for potential insight to optimize smoke exhaust system design and layout by analyzing different fire scenariosKey word for our class is – Safety.We are going to look at what would ensure safety of people in a Retail shopping mall building based on CFD analysis to understand smoke and temperature development in the event of fire.OK, How would we do this?Before we jump into the fire modeling using CFD, let us look at some basics What is fire?Fire triangle/ tetrahedronStages of fireWhat is fire dynamics? How does fire spread?How do we quantify fire?Classifying fireFireNFPA 921:“A rapid oxidation process, which is a chemical reaction resulting in the evolution of light and heat in varying intensities.”Webster's Dictionary:“A fire is an exothermic chemical reaction that emits heat and light”Fire Triangle/ TetrahedronThe fire triangle identifiesthe three neededcomponents of fire:fuel (something that willburn)heat (enough to make thefuel burn)and air (oxygen)a fourth component – theuninhibited chain reaction/news-and-research/news-and-media/press-room/reporters-guide-to-fire-and-nfpa/all-about-fireFire Triangle/ Tetrahedronhttps:///wiki/Fire_triangle Stages of fireIgnition: Fuel, oxygen andheat join together in asustained chemical reaction.Growth: With the initial flameas a heat source, additionalfuel ignites. The size of the fireincreases and the plumereaches the ceiling.Fully developed: Fire hasspread over much of fuel;temperatures reach their peak Decay (burnout): The fireconsumes available fuel,temperatures decrease, firegets less intense.Fire developmentFire development is a function of many factors including:Fuel propertiesFuel quantityVentilation (natural or mechanical)Compartment geometry (volume and ceiling height)Location of fireAmbient conditions (temperature, wind, etc.).How fire spreadsFire spreads by transferring the heat energy from the flames in three different ways: -Conduction: The passage of heat energy through or within a material because of direct contact, such as a burning wastebasket heating a nearby couch, which ignites and heats the drapes hanging behind, until they too burst into flames.Convection: The flow of fluid or gas from hot areas to cooler areas.Radiation: Heat traveling via electromagnetic waves, without objects or gases carrying it along. Radiated heat goes out in all directions, unnoticed until it strikes an object. ConductionConvectionhttps:///%3Cfront%3E/fire-dynamicsRadiationHow do we quantify fire?Heat Release Rate (HRR) is the rate at which fire releases energy - this is also known as power. Depending on the size of the fire, HRR is measured in W, kW or MW Heat Flux is the rate of heat energy transferred per surface unit area - kW/m2.Implications of fire powerWhat does heat flux do?What does temperature do?https:///%3Cfront%3E/fire-dynamicsImplications of smoke from fire/news-and-research/news-and-media/press-room/reporters-guide-to-fire-and-nfpa/consequences-of-fire#fumesClassifying fireClass A: Ordinary combustible materials, such as wood, cloth, paper, rubber and many plastics. They burn with an ember and leave an ash. Water and other extinguishingagents are effective.Class B: Flammable liquids (burn at room temperature) and combustible liquids (require heat to ignite). Petroleum greases, tars, oils, oil-based paints, solvents, lacquers,alcohols, and flammable gases. High fire hazard; water may not extinguish. Extinguish by creating a barrier between the fuel and the oxygen, such as layer of foam.Class C: Fuels that would be A or B except that they involve energized electrical equipment. Special techniques and agents required to extinguish, most commonlycarbon dioxide or dry chemical agents.Class D: Combustible metals, such as magnesium, titanium, zirconium, sodium, lithium and potassium. Most cars contain numerous such metals. Extinguish with specialpowders based on sodium chloride or other salts; also clean dry sand.Class K: Fires in cooking appliances that involve combustible cooking media (vegetable or animal oils and fats)./news-and-research/news-and-media/press-room/reporters-guide-to-fire-and-nfpa/all-about-fireTotal cost of fire in the USIn 2011 the total cost of fire is estimated at $329 billion, or roughly 2.1% of U.S. gross domestic product. The components are: -Fire Loss in the USFire loss- statisticsHaving gone through certain relevant information about fire and facts about consequences of fire in terms of personal and economic loss, we will now get into details about how Autodesk CFD simulation can be useful in evaluating smoke spread and temperature distribution in a Retail mall building with a view to validate smoke exhaust system design for life safety.Objective 1: Fire modeling using Autodesk CFDKiosk fire on Pearl Street, Boulder, US/ci_19242213Fire source represented as fire part in CFDFlow only enters andleaves through thebottom and top surfaces.The main flow directionshould be to the vertical.Gap underneath the firefor cool air to be drawn inRetail mallFresh air entrySectional details of the Retail mallFire PartUse free area ratio=0.85 andconductivity of 200W/m-K to spreadthe heat within theflameFire modelled as a short cylinder and assigned as resistance material.Steel ring around the fire part (~1/2 flame height) and suppressed fromthe meshFast t- squared fire growth up to 2500 kW and steady state thereafter is considered, Fire diameter = 3.35 m (NFPA 92B, A.5.2.1, based on HRRPUA 568 kW/m 2 and fire size of 5 MW). Variation of fire size with respect to time. Fire size reaches 1.75 MW (convective portion of 2.5 MW) at 210 seconds. Convective portion is taken as 70% of the total fire HRR.Mesh detailsThe fire and the air above and below - good uniform mesh- to capture the flow accurately by CFDFire sourceSolid ring suppressed from the mesh and ensures that flow only enters and leaves through the bottom and top surfacesMaterial propertiesAir : Variable quantity, to account for density variation with temperature and buoyancy Boundary Conditions- air domain inletBoundary conditions- outletSolution parametersSolver settingsInitial conditionsAir domain set at initial conditions as scalar=0, temperature =35.20 CObjective 2: Key ResultsMost important key results:Smoke free space and tenable smoke temperatureSmoke tenability limit considered as 10m visibility based on BS PD 7974-6:2004, Annex G, Table G.1 for large enclosures and travel distances.Tenability limit for temperature is 1150C for up to five minutes exposure to convected heat and 680C for up to 30 minutes (water content of atmosphere less than 10% H2O by mass). For atmosphere saturated with water vapor (such as in sprinklered fires), atenability limit temperature of 600C is recommended for any exposure period up to 30 minutes as per BS PD 7974-6:2004, Table G.3Toxicity is deemed acceptable if visibility >10mKey result 1:Smoke visibility-10m (smoke free space)Most of walking corridor space is smoke free (smoke free clear height of 1.8m above the corridor floor)Key result 2:Tenable smoke temperatureIn G+2 floor below 1.8m FFL, smoke temperature is below 600C and hence tenability limits for smoke temperature is not breached up to 20 minutes from start of fireKey result 3:Air flow field•Fresh air velocity contacting smoke plume has not exceeded 1.02 m/s. Hence smoke plume does not get dispersed and rises as plume above required smoke free clear height.•Replacement air velocity at entrance to the shopping mall does not exceed 1.6 m/s and hence does not hinder people escape through the entranceAverage velocity is1.4 m/sAverage velocityis 1.6 m/sObjective 3: Conclusions and RecommendationsWhat is important from CFD analysis?For designers and regulators, information about the following is important Smoke movementTemperature distributionAirflow fieldSmoke transport is tracked w.r.t rise of smoke in atrium, along corridors and interconnected spacesSmoke developmentSmoke visibility (Smoke free space) – X PlaneSmoke developmentSmoke visibility (Smoke free space) – Y planeSmoke developmentSmokevisibility(Smokefreespace)****************+2floor(Z-plane)Temperature development X PlaneTemperature development Y PlaneFresh air flow movementZ Plane (at UG level above fire location)Air speed developmentY PlaneWhat do the results indicate?CFD analysis of smoke movement indicate well defined plume development and smoke rising towards smoke exhaust fansFresh air drawn due to the smoke exhaust fans do not disturb the smoke plume and hence does not cause smoke dispersion and visibility problems in the occupied spaces in UG, G+1 and G+2 floorsHot smoke rises towards atrium ceiling and its temperature is within acceptable limits for human safety.Smoke exhaust fan capacity and layout is adequate to provide smoke free space for about 20 minutesWhat do we conclude and recommend?Based on a given smoke exhaust fan layout and fire zoning logic, CFD analysis using Autodesk CFD can accurately predict smoke development, smoke movement, visibility levels and temperature distribution. Hence this approach can be used to validateventilation design for anticipated fire scenarios.Recommended to carry out fire zoning first and then the same can be optimized through CFD analysis.Objective 4:Insights from CFD analysis to optimize smoke exhaust system design and layout Optimize smoke exhaust system design...Smoke ventilation is created by large fans placed at the podium level of the roof and fresh air (replacement air) supply from the shopping mall entry at the upper ground level Since a prior distribution of smoke/air velocities is not known at the podium level, a number of scenarios for ventilation fan layout and capacities were simulated.Comparison of Smoke exhaust fan layout and fan capacitiesOptimize smoke exhaust system design... Helpful toolBased on1. fire size2. outdoor ambient temperature3. distance from base of fire to smoke layer interfaceestimate total volumetric flow of smoke exhaust (m3/s)From the above, estimate minimum edge-to-edge separation and maximum number of fans (maximum flow through each fan) for each atrium and fire zoning logic to avoid plug holing and hence proper exhaust of smoke instead of being blocked by fresh air drawn by the fans.Comparison of Smoke development w.r.t time during fire eventComparison of airflow fileld and temperature development w.r.t time during fire eventOptimize smoke exhaust system design... summaryParameter Design 1Design 2Smoke movement/ SmokeNot good/ Not acceptable Good/ Acceptable visibilitySmoke temperature Risky Acceptable Air flow field Not acceptable AcceptableSmoke exhaust systemNot suitable Adequate design and layoutThank you for listening…. I hope you enjoyed the class and have met the objectives of the AU class and now will be able to:Understand how fire dynamics was modeled and analyzedHighlight key results from CFD for life safety assessmentDraw important conclusions and offer valuable recommendationsOptimize smoke exhaust system design and layout by analyzing different fire scenariosMy Contact details are given below:*******************Twitter: @m_munirajuluLinkedIn: https: ///in/ dr-munirajulu-m-3901a219For info on who we are and what we do…。
Mercon ULV自动变速箱油产品说明说明书
SAFETY DATA SHEET1. IdentificationMERCON ULV AUTOMATIC TRANSMISSION FLUIDProduct identifierOther means of identification196825FIR No.Automatic Transmission FluidRecommended useNone known.Recommended restrictionsManufacturer/Importer/Supplier/Distributor informationFord Motor CompanyCompany NameAttention: SDS Information, P.O. Box 1899AddressDearborn, Michigan 48121USA1-800-392-3673Telephone1-800-448-2063 (USA and Canada)SDS InformationEmergency telephonenumbersPoison Control Center: USA and Canada: 1-800-959-3673INFOTRAC (Transportation): USA and Canada 1-800-535-50532. Hazard(s) identificationNot classified.Physical hazardsAspiration hazardCategory 1Health hazardsNot classified.Environmental hazardsNot classified.OSHA defined hazardsLabel elementsSignal word DangerHazard statement May be fatal if swallowed and enters airways.Precautionary statementPrevention Observe good industrial hygiene practices.Response If swallowed: Immediately call a poison center/doctor. Do NOT induce vomiting. Take offcontaminated clothing and wash it before reuse.Storage Store locked up.Disposal Dispose of contents/container in accordance with local/regional/national/international regulations. Hazard(s) not otherwiseNone known.classified (HNOC)Supplemental information None.3. Composition/information on ingredientsMixturesCAS number% Chemical name Common name and synonyms89 - 90Distillates (petroleum), hydrotreated64742-55-8light paraffinicSpecific chemical identity and/or exact percentage (concentration) of composition has been withheld as a trade secret.4. First-aid measuresMove to fresh air. Call a physician if symptoms develop or persist.Inhalation Wash off with soap and water. Get medical attention if irritation develops and persists.Skin contact Rinse with water. Get medical attention if irritation develops and persists.Eye contact Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs.IngestionAspiration may cause pulmonary edema and pneumonitis.Most importantsymptoms/effects, acute and delayedProvide general supportive measures and treat symptomatically. Keep victim under observation.Symptoms may be delayed.Indication of immediatemedical attention and special treatment needed Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves.General information5. Fire-fighting measuresWater fog. Foam. Dry chemical powder. Carbon dioxide (CO2).Suitable extinguishing media Do not use water jet as an extinguisher, as this will spread the fire.Unsuitable extinguishing mediaDuring fire, gases hazardous to health may be formed. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.Specific hazards arising from the chemicalSelf-contained breathing apparatus and full protective clothing must be worn in case of fire.Special protective equipment and precautions for firefighters Move containers from fire area if you can do so without risk.Fire fightingequipment/instructions Use standard firefighting procedures and consider the hazards of other involved materials.Specific methods No unusual fire or explosion hazards noted.General fire hazards6. Accidental release measuresAvoid contact with eyes, skin, and clothing. Avoid inhalation of vapors and spray mists. Ensure adequate ventilation. Keep people away from and upwind of spill/leak. Keep unnecessarypersonnel away. Local authorities should be advised if significant spillages cannot be contained.Wear appropriate protective equipment and clothing during clean-up. For personal protection, see section 8 of the SDS.Personal precautions,protective equipment and emergency proceduresThe product is immiscible with water and will spread on the water surface.Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water.Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.Methods and materials for containment and cleaning upAvoid discharge into drains, water courses or onto the ground.Environmental precautions7. Handling and storageAvoid contact with eyes, skin, and clothing. Avoid breathing mist or vapor. Avoid prolongedexposure. Provide adequate ventilation. Observe good industrial hygiene practices. Wash hands thoroughly after handling. Wear appropriate personal protective equipment. For personal protection, see Section 8 of the SDS.Precautions for safe handlingStore locked up. Store in tightly closed container. Store away from incompatible materials (see Section 10 of the SDS).Conditions for safe storage,including any incompatibilities8. Exposure controls/personal protectionOccupational exposure limitsThe following constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure limit.At this time, the other constituents have no known exposure limits.US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)Form Value Components Type PEL5 mg/m3Mist.Distillates (petroleum),hydrotreated light paraffinic (CAS 64742-55-8)US. ACGIH Threshold Limit Values FormValue ComponentsType TWA5 mg/m3Inhalable fraction.Distillates (petroleum),hydrotreated light paraffinic (CAS 64742-55-8)US. NIOSH: Pocket Guide to Chemical Hazards Form Value Components Type STEL10 mg/m3Mist.Distillates (petroleum),hydrotreated light paraffinic (CAS 64742-55-8)TWA 5 mg/m3Mist.No biological exposure limits noted for the ingredient(s).Biological limit values Use adequate ventilation to control airborne concentrations below the exposure limits/guidelines. If user operations generate a vapor, dust and/or mist, use process enclosure, appropriate local exhaust ventilation, or other engineering controls to control airborne levels below the recommended exposure limits/guidelines.Appropriate engineering controlsIndividual protection measures, such as personal protective equipmentWear safety glasses with side shields (or goggles).Eye/face protectionSkin protectionSuitable chemical protective gloves should be worn when the potential exists for skin exposure.The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other. Nitrile gloves are recommended.Hand protectionWear appropriate chemical resistant clothing if applicable.OtherIf engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker health, an approved respirator must be worn. Respirator selection, use and maintenance should be in accordance with the requirements of OSHA Respiratory Protection Standard 29 CFR 1910.134 and/or Canadian Standard CSA Z94.4.Respiratory protectionWear appropriate thermal protective clothing, when necessary.Thermal hazards Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants.General hygiene considerations9. Physical and chemical propertiesAppearanceLiquid.Physical state Liquid.Form Red.Color PETROLEUM OdorOdor threshold Not available.pHNot available.Melting point/freezing point Not available.Initial boiling point and boiling range Not available.Flash point > 314.6 °F (> 157.0 °C) Pensky-Martens Closed Cup Evaporation rate Not available.Not applicable.Flammability (solid, gas)Upper/lower flammability or explosive limits Explosive limit - lower (%)Not available.Explosive limit - upper (%)Not available.Vapor pressure< 1 mm HgVapor density > 1 (Air=1)Relative density0.83 - 0.85 (Water=1)Relative density temperature 60.08 °F (15.6 °C)Solubility(ies)Solubility (water)Negligible Partition coefficient (n-octanol/water)Not available.Auto-ignition temperature Not available.Decomposition temperature Not available.Viscosity19 - 20 cSt Viscosity temperature104 °F (40 °C)10. Stability and reactivityThe product is stable and non-reactive under normal conditions of use, storage and transport.Reactivity Material is stable under normal conditions.Chemical stability No dangerous reaction known under conditions of normal use.Possibility of hazardous reactionsContact with incompatible materials.Conditions to avoid Strong oxidizing agents.Incompatible materials Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.Hazardous decomposition products11. Toxicological informationInformation on likely routes of exposureInhalationBased on available data, the classification criteria are not met. Prolonged inhalation may be harmful.Skin contact Based on available data, the classification criteria are not met.Eye contact Based on available data, the classification criteria are not met.IngestionDroplets of the product aspirated into the lungs through ingestion or vomiting may cause a serious chemical pneumonia.Symptoms related to the physical, chemical andtoxicological characteristics Aspiration may cause pulmonary edema and pneumonitis.Information on toxicological effectsAcute toxicityMay be fatal if swallowed and enters airways.Prolonged skin contact may cause temporary irritation.Skin corrosion/irritation Direct contact with eyes may cause temporary irritation.Serious eye damage/eye irritationRespiratory or skin sensitizationRespiratory sensitizationNot a respiratory sensitizer.This product is not expected to cause skin sensitization.Skin sensitization No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic.Germ cell mutagenicity CarcinogenicityNot classifiable as to carcinogenicity to humans.IARC Monographs. Overall Evaluation of CarcinogenicityNot listed.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)Not listed.This product is not expected to cause reproductive or developmental effects.Reproductive toxicitySpecific target organ toxicity -single exposureNot classified.Specific target organ toxicity -repeated exposureNot classified.Aspiration hazard May be fatal if swallowed and enters airways.Chronic effectsProlonged inhalation may be harmful.12. Ecological informationThe product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment.EcotoxicityNo data is available on the degradability of any ingredients in the mixture. Persistence and degradabilityBioaccumulative potential No data available.Mobility in soil Other adverse effectsNo other adverse environmental effects (e.g. ozone depletion, photochemical ozone creationpotential, endocrine disruption, global warming potential) are expected from this component.13. Disposal considerationsCollect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose of contents/container in accordance with local/regional/national/international regulations. Don't pollute. Conserve resources. Return used oil to collection centers.Disposal instructionsDispose in accordance with all applicable regulations.Local disposal regulations The waste code should be assigned in discussion between the user, the producer and the waste disposal company.Hazardous waste code Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see:Disposal instructions).Waste from residues / unused productsSince emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal.Contaminated packaging14. Transport informationDOTNot regulated as dangerous goods.IATANot regulated as dangerous goods.IMDGNot regulated as dangerous goods.Not established.Transport in bulk according toAnnex II of MARPOL 73/78 and the IBC Code15. Regulatory informationThis product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.US federal regulationsToxic Substances Control Act (TSCA)TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)Not regulated.CERCLA Hazardous Substance List (40 CFR 302.4)Not listed.SARA 304 Emergency release notificationNot regulated.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)Not listed.SARA 302 Extremely hazardous substanceSuperfund Amendments and Reauthorization Act of 1986 (SARA)Not listed.YesSARA 311/312 Hazardous chemicalAspiration hazardClassified hazard categoriesSARA 313 (TRI reporting)Not regulated.Other federal regulationsClean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) ListNot regulated.Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)Not regulated.Not regulated.Safe Drinking Water Act(SDWA)International InventoriesAll components are listed or are exempt from listing on the Toxic Substances Control Act Inventory.16. Other information, including date of preparation or last revision08-20-2021Issue date Version 01Health: 0Flammability: 1Physical hazard: 0HMIS® ratingsHealth: 0Flammability: 1Instability: 0NFPA ratingsThis document was prepared by FCSD-Toxicology, Ford Motor Company, Diagnostic Service Center II, 1800 Fairlane Drive, Allen Park, MI 48101, USA, based in part on information provided by the manufacturer. The information on this data sheet represents our current data and is accurate to the best of our knowledge as to the proper handling of this product under normal conditions and in accordance with the application specified on the packaging and/or technical guidance literature. Any other use of the product which involves using the product in combination with any other product or any other process is the responsibility of the user. To the extent that there are any differences between this product’s Safety Data Sheet (SDS) and the consumer packaged product labels, the SDS should be followed.Preparation Information and DisclaimerXT-12-QULV, XT-12-QULV1Part number(s)。
Intensifier T Series HD-TVI 1080p 2MP 传统摄像头说明书
DIMENSIONSFEATURESHTINTT5T – Grey housingSPECIFICATIONSImage Sensor.................. 1/3” Progressive Scan CMOS, 2MP Minimum Illumination....... 0.001 lux (Sens-up X32) Effective Pixels................ 1984 (H) x 1105 (V) Total Pixels...................... 2000 (H) x 1121 (V) Scanning System............ Progressive S/N Ratio......................... More than 50dB Output Resolution............ 1920x1080 @ 30fps Video Output.................... 1.0Vp-p / 75 OhmsElectronic Shutter............ Auto / Manual (1/30 – 1/30,000 sec.) Day / Night....................... Auto / Color / BW / External Communication............... UTC (up the coax) Power............................. 12VDC / 24VACPower Consumption........ 150mA (DC), 2W (AC) Operating Temperature....14° F – 122° FUnit Dimensions.............. 2.5”(W) x 2.2”(H) x 4”(L) Unit Weight...................... 1.5Ibs.Certifications.................... FCC, RoHS Signal Distance............... Up to 1600 feet(depending on coax quality)*• Full HD resolution over coax (HD-TVI) • Supports up to Full HD 1080p @ 30fps • True WDR operation• Superior low-light performance• Amplify existing light with no distance limitation• PRESET (Indoor/Outdoor/Lowlight/Hallway/Lobby/Elevator) • Full OSD operation thru on-board control and UTC (up the coax) • Additional 960H analog output • Signal distance up to 1600 feet* • 12VDC/24VAC dual voltage operation • 5 year warrantyOSD M ENU T REEEXPOSURE• B /W• E XTERN• L OW• M IDDLE• H IGH• S HARPNESS • G AMMA • M IRROR • F LIPDAY / N IGHTWHITE B AL.SPECO D NRIMAGEEXIT• B RIGHTNESS• S HUTTERBACKLIGHT• H LC• B LC• W DR• A UTO• A WB• C OLOR G AIN• A CE• D EFOGSYSTEM• C OM.• I MAGE R ANGE • C OLOR S PACE• F RAME R ATE• I NTENSIFY• A GC• C OLOR• P RIVACYLENS MOTION • O UTPUT • L ANGUAGE• C OLOR B AR• R ESET• C AMERA T ITLE• F REQLENS : S elect t he l ens t ype (ALC/ELC)EXPOSURE : A djusts e xposure s eEngs.B RIGHTNESS : A djusts i mage b rightness. (0~ 20) S HUTTER : A uto / M anual S huTer c an b e s electable -‐ A UTO : S huTer c an b e s electable a utomaVcally.-‐ F LICKER(Flicker L ess) : S elects t his w hen p icture flickering.-‐ M anual : C ontrols t he s huTer s peed m anually f rom 1/30 ~1/30000 I NTENSIFY : S ets t he d esired m ulVple o f t he d igital e xposure l ength. (OFF/x2 ~ x 32)A GC(Auto G ain C ontrol): A djusts t he A GC l evel. (0~10)OSD M ENU D etailsPRESET MODE• INDOOR • OUTDOOR • LOW LIGHT • LOBBY • HALLWAY • ELEVATORMAIN SETUP Side ViewFront ViewBack panel ConfigurationUnit : inchTVI OutCVBS Out (Analogue)Power In (12VDC/24VAC)OSD joystick4” L2.5” W2.2” HSpeco T echnologies i s c onstantly d eveloping p roduct i mprovements. We r eserve t he r ight t o m odify p roduct d esign a nd s pecificaRons w ithout noRce a nd w ithout i ncurring a ny o bligaRon. R ev. 160809OSD M ENU D etailsDAY / N IGHT : A djust D ay / N ight o pRons . C OLOR : A lways C olor m ode. B /W : A lways B /W m ode.-‐ A NTI-‐SAT. : A djusts t he A nV S aturaVon l evel (0~20) E XT : p lease d o n ot u se t his m ode f or t his i temA UTO : D ay / N ight i s s witching a utomaVcally b y A GC l evel. -‐ A NTI-‐SAT. : A djusts t he A nV S aturaVon l evel (0~20) -‐ A GC T HRES : A djusts A GC T HRES (0~20) -‐ A GC M ARGIN : A djusts A GC m argin (0~20)-‐ D ELAY : A djusts t he c hanging d elay V me (LOW/MIDDLE/HIGH)WHITE B AL. : A djusts w hite b alancing o pRons.A WB : i t g oes t o o pVmized c olor l evel a utomaVcally.C OLOR G AIN : S ets t he d esired C olor G ain v alue (0~20)S PECO D NR : U ses t o r educe t he b ackground n oise i n a l ow l uminance e nvironment w ith 2D + 3D filtering s ystem.BACKLIGHT : A djusts b acklight o pRons.W DR : W DR i lluminates d arker a reas o f a n i mage w hile r etaining t hes ame l ight l evel f or b righter a reas t o e ven o ut t he o verall b rightness o f i mages w ith h igh c ontrast b etween b right a nd d ark a rea -‐ A djusts t he W DR W eight (LOW/MIDDLE/HIGH) * C VBS o ut c annot a djust t his f uncVon.B LC : P roduces a c learer i mage o f a n o bject d arkened b y s trong b acklighVng. -‐ H -‐POS : A djusts t he h orizontal p osiVon(0~20) -‐ V -‐POS : A djusts t he V erVcal p osiVon(0~20) -‐ H -‐SIZE : A djusts t he h orizontal b lock s ize (0~20) -‐ V -‐SIZE : A djusts t he v erVcal b lock s ize (0~20)H LC : U ses t o c ontain e xtremely b right a reas s uch a s f rom c ar h eadlight, t he l ight c an b e m asked o ut m uch o f t he o n-‐screen d etails. IMAGE : A djusts v arious i mage o pRons.S HARPNESS: A djusts s harpness l evel. I ncreasing t his v alue, t he p icture o utline b ecomes s tronger a nd c lear. (0~10) G AMMA : S ets t he d esired G amma v alue. (0.45 ~ 0.75) M IRROR : C hange t he v ideo d irecVon h orizontally. F LIP: C hange t he v ideo d irecVon p erpendicularly.A CE (D-‐WDR) : U ses a d igital w ide d ynamic r ange t o b alance d ark a nd o ver s aturated a reas w ithin t he i mage.D EFOG : A cVvated t his m ode w hen t he v ideo o r t he w eather i s f oggy. P RIVACY : U sed t o h ide r egions o f t he i mage. -‐ Z ONE N UM : S elects t he z one n umber u p 15. -‐ Z ONE D ISP : S elects d esired z one w ith O N o r O FF -‐ H -‐POS : A djusts t he h orizontal p osiVon(0~60) -‐ V -‐POS : A djusts t he v erVcal p osiVon(0~40) -‐ H -‐SIZE : A djusts t he h orizontal s ize(0~40) -‐ V -‐SIZE : A djusts t he v erVcal s ize(0~40)-‐ Y -‐LEVEL : A djusts t he y ellow c olor l evel (0~20) -‐ C B L EVEL : A djusts t he b lue c olor l evel (0~20) -‐ C R L EVEL : A djusts t he r ed c olor l evel (0~20)SYSTEM : A djusts v arious c amera s ystem o pRons. O UTPUTF RAME R ATE: S elect t he f rame r ate 30fps/60fps a ccording t o t he v ideooutput m ode. F REQ C OM.-‐ C AM I D : S ets t he c amera I D f or t he R S-‐485 (0~255)-‐ B AUD R ATE : S ets t he b aud r ate f or t he R S-‐485 (2400~115200). I MAGE R ANGE C OLOR S PACEC OLOR B AR : M anufacturer’s o pVonL ANGUAGE : S ets t he d esired O SD l anguage C AMERA T ITLER ESET: P ress w ith l ong t o r eset a ll s elngs t o f actory d efaults.MOTION : A djust m oRon d etecRon s eEngs.-‐ S ENSITIVITY : S ets t he d esired o f “MoVon” (0~20)-‐ W INDOW T ONE : A djusts t he w indow t one v alue (0~60) -‐ W INDOW U SE : A djusts t he w indow s elng s ize (0~3) -‐ W INDOW Z ONE : a cVvate o r d eacVvate m oVon w indow -‐ D ET H -‐POS :Adjusts t he h orizontal p osiVon(0~60) -‐ D ET V -‐POS : A djusts t he v erVcal p osiVon(0~40) -‐ D ET H -‐SIZE : A djusts t he h orizontal s ize(0~60) -‐ D ET V -‐SIZE : A djusts t he v erVcal s ize(0~40) -‐ A LARM : S elect A larm b etween O N o f O FFHTINTT5T – Grey housing。
06D PTC混合电机保护系统说明书
INSTRUCTIONSPage 1 of 16Replacement Components Division 6/0599TA516180A.docxcarlyleinstr.dot*99TA516180A* Instruction Sheet Number: 99TA516180A*99TA516180A* (for RCD use only)Description: 06D PTC Hybrid Motor Protection SystemAuthor: Steve Von BorstelDate: May 19, 2016Part Number: 06DA6606DBN*****WARNINGHAZARDS: ELECTRIC SHOCK / PRESSURE / EXPLOSIONREFRIGERANT AND OIL UNDER PRESSURE∙ Bodily injury may result from explosion and/or fire if power is supplied to compressor with terminal box cover removed or unsecured. Terminal pins may blow-out causing injuries, death or fire.∙ Do not touch terminals, or wiring at terminals, or remove terminal cover or any part of compressor until power is disconnected and pressure is relieved. See safety instructions A through E below.ELECTRIC SHOCK∙ Bodily injury or death may result from electrocution if terminal cover is removed while power is supplied to compressor. ∙ Do not supply power to compressor unless terminal cover is secured in place and all service valves are open.Safety Instructions:Service or maintenance must be performed only by trained certified technicians and according to service instructions.A. Follow recognized safety practices and wear protective goggles.B. Disconnect and lockout all electrical power. Electrical measurements during operation must be taken outside of the compressorterminal box.C. Do not disassemble bolts, plugs, fittings, etc. unless all pressure has been relieved from the compressor.D. These modules ARE NOT considered to be user accessible. The Extra-Low Voltage (ELV) circuits of these devices, inconnection with motor-winding-PTCs, ARE NOT Safety Extra Low Voltage (SELV) circuits. Proper measures against electric shock MUST BE provided in the end use application. The correct Carlyle Terminal box for the compressor application does provide this protection.E. The 24VDC module, part number 06DAND0000, DOES NOT have galvanic isolation between the ELV circuit and theconnection for the module’s power supply. For this reason, proper measures against electric shock MUST ALSO BEPROVIDED for the module’s power supply and all other components, which are electrically (directly or indirectly), connected to the device’s power supply, if they will be considered user accessible. The 115/240 VAC and 24 VAC modules, part numbers 06DANB0000 and 06DANC0000 respectively, DO HAVE galvanic isolation between the ELV circuit and the connection for the module’s power supply.Caution: Before starting this service, read through the followings items to ensure you have the correct service kit for your application. In many situations, wiring of this module will be different from the existing motor protection it is replacing.1) This kit is intended to service compressors which use the Kirwan Hybrid Motor Protection system that uses internal PositiveTemperature Coefficient Thermistors (PTCs) embedded in the compressor motor.a) These compressors can be identified by a number (“0”, “1”, “2” or “3”) in the 10th digit of the Carlyle Model No. b) These compressors are equipped with the 6-pin terminal plate.2) This kit can be used to add the Hybrid motor protection to Carlyle compressors w/PTCs which did not originally come with theKriwan module. However, additional components, like a new terminal box and labels, may be required.3) For compressors and/or systems which do not have internal PTCs and use the internal thermostats, refer to Service InstructionSheet No. 99TA516184. These would be Carlyle compressors with “A”, “C” or “G” in the 10th digit of the Carlyle Model No. 4) Part Winding Start compressors with a “B” or “D” in the 10th digit of the model No. cannot use a hybrid motor protection system.!5)Single Phase compressors refer to instructions 99TA516185.6)There are three different control voltages that are available for these protection modules. The control voltage is coded into the KitNo. and the Module No.Control Voltage 10th Digit Comp’r Model No. Kit No. (12th digit) Module No. (6th digit)110 -220 VAC 06DF3132A13650 06DA6606DBN B****06DBN B****24 VAC 06DF3132A2365006DA6606DBN C****06DBN C****24 VDC 06DF3132A3365006DA6606DBN D****06DBN D****7)Each kit has been preprogrammed to trip at the required Maximum Continuous Current (MCC) value. The MCC value is codedinto the last 4 digits of the service kit number and the part number of the module. The number shown in the last four digits represents the MCC value in tenths of an Amp:Example: Required MCC Kit No. (13th – 16th digit) Module No. (7th – 10th digit)13.5 Amps 06DA6606DBNB013506DBNB013544.0 Amps 06DA6606DBNC044006DBNC044020.9 Amps 06DA6606DBNC020906DBNC0209Appendix II is a list of the Carlyle Compressor Models that are supported by these kits. Verify that the MCC of the module corresponds to the compressor being serviced. If any of this information is not correct for the unit being serviced, do not use this kit. Contact RC or Carlyle Compressor for assistance.1 This kitcontains:No. QTY. Part No. Kit No. Description1 1 06DA509598 ALL BRACKET2 106DANB0000 06DA6606DBNB**** 110-120 VAC MODULE06DANC0000 06DA6606DBNC**** 24 VAC MODULE06DAND0000 06DA6606DBND**** 24 VDC MODULE3 1 06DA509599 ALL CURRENTTRANSFORMER4 2 AL56JA126 ALL #6 SCREW FOR CT (NOT SHOWN)5 2 AK87JY078 ALL #6 SCREW FOR MODULE (NOT SHOWN)6 2 99WZ0830QA201214 ALL WIREASSY7 1 06DA509601 ALL MCC PROGRAMMING LABEL8 1 06DA409610 ALL HARDWARE KIT (NOT SHOWN)9 1 06DA509602 ALL WIRING LABEL (NOT SHOWN)123672Verify that kit received is suitable for the compressor and system being serviced. First, make sure the module is intended for Carlyle 06D compressor which is fitted with internal PTCs.3Verify required control voltage of the module is correct for the system/unit supply. If thecompressor was originally shipped with the hybrid motor protection arrangement, it will be reflected in the 10th digit of the Carlyle Model No. with a “1”, “2” or “3”. If the 10th digitcontains a “0” (zero), the compressor was originally shipped without a motor protectionsystem or may have been a service compressor.Control Voltage 10th Digit Comp’r Model No. Kit No. (12th digit) Module No. (6th digit)110 -220 VAC 06DF3132A13650 06DA6606DBS B****06DBN B****24 VAC 06DF3132A2365006DA6606DBS C****06DBN C****24 VDC 06DF3132A3365006DA6606DBS D****06DBN D****TBD 06DF3132A03650∙Verify that the system being service is intended touse the hybrid motor protection system.∙Verify control voltage requirements of the kit matchsystem being serviced or retrofitted.∙Review Steps 14-17 for additional considerations Module – Front Label6 Pin Terminal Plate 06D Comp’rs 10th Digit Contains “0”, “1”, “2” or “3”06C Comp’rs 5th Digit Contains a LetterModule – Back Label4Verify that the MCC value of the new kit and module matches the required value shown in Appendix I and the label on the module being replaced.5Make sure the system and compressor has been properly locked-out and tagged (LOTO) before proceeding with any work.6Remove the terminal box cover. If the compressor was originally fitted with hybrid motor protection system, the terminal box and wiring should resemble the Figure below:MODULECTCOMPRESSOR TERMINAL PLATE7 There are four sets of electrical connections that must be removed and then reconnected on the new module.A)Control Power to the module (Terminals “L” & “N” on the module)B)Module connections for the control circuit (Terminal “11” & “14” on the module)C)Power Lead that is monitored by the CT (Current Transformer) @ the terminal plateD)PTC connections @ the terminal plate (Terminals “7” & “9” on the compressor)8 Disconnect these connections at the locations shown above. If required, mark the wires for the module power and the control circuit connections so they are not mixed or switched during assembly.ABCDPOWER LEADTHROUGH CT9 Remove the screws which hold the entire control module assembly to the terminal box. Two on the side and one inside the box.10 Double check that the labels on the control module being replaced and the new control module are the same.11 Re-install the new module assembly and affix to the terminal box. The screws on the side of the terminal box (#10-16 Thread Forming) are torque to 12-24 in-lbs and the screw in the bottom (#10-32 UNC) is torque to 36-60 in-lbs.12Re-connect the electrical connections removed in Step 8.Below are the associated torque limits with thoseconnections. Refer to the picture in Step 7. Make surethe power connection to the compressor goes throughthe CT and that the components for the compressorterminal pin connection are arranged correctly as shown.The Dished Retainer must be oriented so it extendsthrough the Phase Barrier and the terminal sits on top.CONNECTION TORQUEIN-LBS A) CONTROL POWER TO MODULE9-11 IN-LBSB) CONTROL CIRCUIT TO MODULEC) POWER CONNECTION TO TERMINAL PIN18-30 IN-LBSD) PTC WIRES FROM MODULE TO TERMINAL PINS13 Make sure correct label(s) are installed on the terminal box cover. The labels should be the same as the ones shipped with the kit. If not, install the new labels on the terminal box cover. Torque the terminal box cover screws to 12-24 in-lbs.Retrofitting the PTC Hybrid Motor Protection System to a Carlyle PTC compressor thatcurrently does not use the system.14 If this hybrid motor protection is beingretrofitted to a 6-pin Carlyle compressorwith PTC for the first time, make sure thecompressor has a “Large Folded” terminalbox (06DA407764 for gray)Note:The large folded box required to fit thismotor protection system is not rated foroutdoor use.DISHED RETAINERUP15 Two and four cylinder compressors will require a spacer (06DA509606) under the terminal box to accommodate the large folded box. This spacer is included in the service kit parts bag sent out with each service module. Note: The longer #10-32 screws (1/2” lg) must be used when the spacer is used under the terminal box. 3/8” long screws are used w/o the spacer.SPACER16 Ensure one of the power leads is long enough to be routed through the CT. For this module, it does not matter which power lead goes through the CT. The power lead for either #1, #2 or #3 can be used. Note: only one lead should go through the CT and only once as shown.17 Control voltage will have to be supplied in accordance with the module selected. Power consumption is 3 VA.End.POWER LEADTHROUGH CTAPPENDIX I: TOOLS FOR 06D HYBRID MOTOR PROTECTION SERVICEREVISION RECORDDATEREV.DESCRIPTIONCARLYLE REF. FILE NAME11/10/15 --- INITIAL RELEASE99TA516180_PTC_Hybrid_Mtr_Protech.docx 5/19/16 AADDED 24 VDC MODELS & ASSOCIATED WARNINGS99TA516180A_PTC_Hybrid_Mtr_Protech.docxTOOLTOOL NUMBER SUPPLIER OPERATION S T E P (s)NOTES5/16” NUT DRIVER00941972000P CRAFTSMAN REMOVING & INSTALLING: ∙ TERMINAL BOX COVER ∙ MTR PROTECTION ASSY 6 9 1113#2 PHILLIPS OR FLAT BLADE SCREW DRIVERAWP2X125 FACOM REMOVING/INSTALLING WIRE CONNECTIONS ON MODULE 8 12FLAT BLADE SCREW DRIVER AW10X200 FACOM REMOVING/INSTALLING TERMINAL BARREL NUTS8 12TO FIT .064/.075”SLOTAppendix II – Compressor Model Cross Reference to Module Kit No.Appendix II – Compressor Model Cross Reference to Module Kit No. Cont.Appendix II – Compressor Model Cross Reference to Module Kit No. Cont.Appendix II – Compressor Model Cross Reference to Module Kit No. Cont.Appendix II – Compressor Model Cross Reference to Module Kit No. Cont.。
绿色食品标准体系表
绿色食品标准体系表序号标准名称标准编号序号标准名称标准编号1 NY/T268-1995绿色食品苹果26 NY/T 428-1995绿色食品葡萄2 NY/T270-1995绿色食品番茄27 NY/T 429-1995绿色食品黑打瓜籽3 NY/T273-2002绿色食品啤酒28 NY/T 430-2000绿色食品食用红花籽油4 NY/T274-1995绿色食品干白葡萄酒29 NY/T 431-2000绿色食品番茄酱5 NY/T275-1995绿色食品半干葡萄酒30 NY/T 432-2000绿色食品白酒6 NY/T276-1995绿色食品干红葡萄酒31 NY/T 433-2000绿色食品植物蛋白饮料7 NY/T277-1995绿色食品半干红葡萄酒32 NY/T 434-2000绿色食品果汁饮料8 NY/T278-1995绿色食品干桃红葡萄酒33 NY/T 435-2000绿色食品水果蔬菜脆片9 NY/T285-2003绿色食品豆类34 NY/T 436-2000绿色食品国脯10 NY/T287-1995绿色食品高级大豆烹调油35 NY/T 437-2000绿色食品酱腌菜11 NY/T288-2002绿色食品茶叶36 NY/T 654-2002绿色食品白菜类蔬菜12 NY/T289-1995绿色食品咖啡粉37 NY/T 655-2002绿色食品茄果类蔬菜13 NY/T290-1995绿色食品橙汁和浓缩橙汁38 NY/T 657-2002绿色食品乳制品14 NY/T291-1995绿色食品番石榴果汁饮料39 NY/T 743-2003绿色食品绿叶类蔬菜15 NY/T292-1995绿色食品西番莲果汁饮料40 NY/T 744-2003绿色食品葱蒜类蔬菜16 NY/T418-2000绿色食品玉米41 NY/T 745-2003绿色食品根菜类蔬菜17 NY/T419-2000绿色食品大米42 NY/T 746-2003绿色食品甘蓝类蔬菜18 NY/T420-2000绿色食品花生43 NY/T 747-2003绿色食品瓜类蔬菜19 NY/T 绿色食品小麦44 NY/T 748-2003绿色食品豆类蔬菜421-2000粉20 NY/T422-2000绿色食品白砂糖45 NY/T 749-2003绿色食品食用菌21 NY/T423-2000绿色食品鲜梨46 NY/T 750-2003绿色食品热带亚热带水果22 NY/T424-2000绿色食品鲜桃47 NY/T 751-2003绿色食品食用植物油23 NY/T425-2000绿色食品猕猴桃48 NY/T 752-2003绿色食品蜂产品24 NY/T426-2000绿色食品柑桔49 NY/T 753-2003绿色食品禽肉25 NY/T427-2000绿色食品哈密瓜50 NY/T 754-2003绿色食品蛋与蛋制品。
Neil Pryde Sails Mainsail Lazy Bag MLB Installatio
I N T E R N A T I O N A L D E S I G N A N D T E C H N I C A L O F F I C E Lazy Bag Installation Guide© Neil Pryde Sails International1681 Barnum AvenueStratford, CONN. 06614Phone: 203-375-2626 • Fax: 203-376-2627Email: ************************Web: All material hereinCopyright 2006-2007 Neil Pryde Sails InternationalAll Rights ReservedOVERVIEWThe Neil Pryde Sails Mainsail Lazy Bag (MLB) is designed to be easily used and modular in design. It can conveniently be fitted and removed independently of the sail.•The MLB includes a zippered flap at the front of Array the bag that wraps around the mast to theopposite side of the bag and zippers closed. Thisis designed to reduce U.V. damage and keepbirds from nesting inside the mainsail!•The front flap can be left in place while sailing,or folded back inside the bag and secured with ahook & loop strip.•The top zipper is also provided with a flap tohelp decrease water ingress.•The MLB is attached to the boom usingslug/slides. The bag is NOT sewn between eachslide so that rain water AND reefing lines can beled from the sail through the bag to the boomattachment points.•Two adjustable webbing straps provide Fore/afttension; one strap is passed through the clew ringof the mainsail and the forward strap goesaround the mast (and inside the halyards). Thestraps are inside the bag to reduce U.V. exposure and allow the bag to be pulled aft over the sail, covering itcompletely. A third strap at the front/top can be used to tighten up the forward girth of the bag.•The battens are inserted from the forward end of the bag. The design is such, that the battens themselves become the attachment point for the lazy jacks. This reduces point loading and makes the bag smooth and taunt. Thebattens are locked in place with the internal Velcro closure system. (Identical to the mainsail batten pocketsystem)The following pictorial guide will outline the basic steps to installation.Installation ProcedureGetting Started:Assuming the sail is already in place, pull the entire sail to one side of the boom. This allows you to access the boom slot opening at the front of the boom, just behind the gooseneck.Starting with aft most end (short end) insert the furthest aft slug into the boom at the forward end of the boom just aft ofthe gooseneck and slide it aft. Add each succeeding slug until the cover is pulled aft completely. Both halves of the bag will be on the same side at this time. (Starboard in the photo)Pull one half of the bag underneath the sail and to theopposite side.The aft webbing strap is led through the clew ring of the sail and back into the buckle. The webbing should be pulled tight enough so that the bag covers the aft end of the sail. In the photo at right you can see the sail clew slug is pull out to the black band on the boom. The bag itself extends aft, past theblack band.With this preliminary adjustment made now insert each batten into the pocket. The ‘butterfly’ fitting is designed to seat with the webbing retainer. This means the unfinished batten end is inserted first. Make sure it is completely seated at the very aft end of the bag. At each opening along the sock mark the batten and remove the batten. We suggest that you make a 2” / 50mm wrap of white riggers tape at theselocations…as it will provide good friction and holding power for the lazy jack lines.Re-insert the battens. Pulling the bag tight and with a fair amount of tension on the battens, the battens should be just inside of the pocket fronts. If this is not the case, they are easily trimmed with a hacksaw.Now insert the webbing/Velcro strap folding the webbing over the butterfly end. This will lock the battens in place. This is the very same system as used on the mainsail battens and will require the ‘pusher stick’ that came with your mainsail for this operation.The jacklines are composed of three parts; the upper line that connects to the mast, the aft line that runs from the aft most connection point on the bag, to the upper ring and the forward line.Take your aft line and tie it around the rigging tape on the batten at the last most connection point on the bag. A double or triple clove hitch or fisherman’s bend are both very good knots that will resist slipping and be quite permanent.Tie the forward line in a similar fashion to the mid-attachment point on the bag.Take one turn on the forward line around the batten and pull the entire jackline system tight. The bag side should be pulled up smoothly and tightly.Later should you want, you can tie a overhand ‘shortening loop’ above the bag on the forward line and turn the rope end around the batten and back up to the loop, making a purchase system that can be secured with a couple of overhands.Do the opposite side in the same fashion.With both sides of the bag now pulled up and tight you need to check the fore/aft location of the bag. Do this by bringing the forward flap around the mast (inside the halyards) and zip it closed. If you cannot zip it or if it zips and is quite loose, the bag needs to be adjusted fore or aft depending on location.You will need to slide each slide backward or forward in small increments until the overall position is correct.Once achieved, readjust the webbing and the aft end and at the forward end take the lower strap around the mast (inside the halyards) and make it fast to the other side.The bag should be taut and smooth along the bottom as in photo at right.Both sets of reef lines can now be led down the inside of the bag and out the bottom and tied securely at the reef eye location.The forward upper webbing strap can now be fitted and is normally adjusted to be snug when the front flap is zipped closed. You can tighten it more to squeeze together the girth of the bag if you choose. This strap provides support should you choose to sail with the front flap tucked inside the bag.The aft eyelets can optionally be used to tidy up the trailingedge of the cover should you choose. Some like to tie a small line from the upper eyelets around the topping lift and back for an upward pull. In this photo we have utilized the eyelet on the rear of the boom to secure the lower eyelets. NOTE: In this picture you can clearly see that we havestretched the bag aft over the sail (which actually stops at the black band).Last Look:These final photographs illustrate the bag from a few vantage points.Forward starboard viewWith forward flap folded back inside and secured to the hookand loop strip.Forward line with shortening loop and hitch.Clove hitch at battenPortside view with front flap closed and zipped.Close up view looking aft.Top view looking forward。
hand mixer(打蛋机外国采购商)
序号会员ID公司名称联系人联系电话网址邮件地址国家省份1dz105791025plumbing ha Mr. ihaddad213-021 81 http://www.contactihad Algeria Algeria2handicrafts STOESSEL MI Mr. FERNAND54-2293-437http://www.无收获ArgentinaBuenos Aire 3rigo1707MILITAIRE N Mr. Paul Ri61-8-944613http://www.warrantyqld AustraliaWest Austra 4au103579288IDM INSTRUM Ms. Julia L61-3-910868http://www.无收获AustraliaVictoria5petnav SS IMPORTER Mr. PETER S86-0731-889http://www.无收获Australia-6au108216974DRAGON HINZ Mr. Alex JO61-04-13182-edwardc520@AustraliaN. S. W7au103938992Handy Impor Mr. yousif 61-02-9756 http://www.无收获AustraliaNew South W 8au105680240Daanish Int Mr. Danish 61-421-455 -sales@danis Australia-9trailerbzTrailers Co Ms. Michel 61-42223339-sales@kingt AustraliaVictoria10au110689447Colli Timbe Mr. Peter R61-08-92492-collimund@c AustraliaWestern AusMr. gerd m.43-5523-627-info@ernst-Austria Vorarlberg 11jaegergmbh j aeger gmbh12bd100799993Industrial Mr. Touhidu880-02-0171-无收获Bangladesh D haka13unicombelgi UNICOM Mobi Mr. Ercan A32-2-425491http://www.sales@unico Belgium-14be108167639LPG Technie Mr. Ives Va32-9-378 68http://www.vanmeenen@v Belgium Ghent15ganying Ganying Sol Mr. Alan As32-2-707865-bjsmartkey@Belgium-16monfortsaMonfort SA M r. Edgard 32-475-9005-cassaz@omed Belgium Namur17saharatecno SAHARA TECH Mr. Valdir 55-11-21711http://www.valdir@saha Brazil Sao Paulo 18br107739833sunny comer Mr. Darren 55-27 -8115-panthers.ho Brazil vitoria19bg110581977Interservic Mr. Stanisl00359-52-55http://www.office@isu.Bulgaria Varna20chinapac China-pac I Mr. Jim Xu1-604-28857-无收获Canada BC21maxill MAXILL INC.Mr. John Sh1-519-631-7@maxill Canada Ontario22cl100953593Mosaico S.A Mr. Alvaro 56-2-731760http://www.psmagazine@Chile Metropolita 23hr100342035LIMEX d.o.o Mr. Liberto385-31-6341-cakovec@lim Croatia (lo Croatia24cy104836082ACHILLEAS F Ms. andri z357-22-3223@achill Cyprus Nicosia25elhamdy Elhamdy Com Mr. Mohamed20-2-241484@elhamd Egypt-26eg117271278overseas Ms. Nesma Y20-010-1200-无收获Egypt cairo27eg109105513Bridges To Mr. Ussama 20-2-275423http://brid info@bridge Egypt-28sphinxintSphinx Int.Mr. Adel Na20-2-610167-lvming@gmai Egypt-29ee100534283FEIZERTON O Mr. Juri Le372-45-3140@profik Estonia Harju30fr109423443Avamo Mr. Nicolas33-6-294916http://www.无收获France-31fr117094159ORLY ELECTR Mr. Horst K33-1-497587http://orly feedback@pe France-32fr102548176PRESTO Mr. OLIVIER33-1-461234http://www.无收获France hauts de se 33de107190383Efteem Elec Mr. Michael49-36741-70-无收获Germany-34de100358180CARODE Mr. Tarik G49-40-32595@carode Germany-35de118208453KAWE Techno Mr. Jorg Dr0049-6058-4http://www.j.drescher@Germany NRW36de100978325IBG FOOD MA Mr. Daniel 49-030-7017@ibgfoo Germany-37de1093925244-Acoustic M r. Detlef 49-02382-70@x-m-e.Germany North-Rhine 38de901404786Ban Mai Ms. Ban Mai49-01522-72http://www.banmaivn@ho Germany Niedersachs 39ifn2004ifn Vertrie Mr. Frank N49-2644-808-ipg@ifn-gro Germany-40greekmax Aristarchus Mr. Stavros0030-6932-8@arista Greece Attiki41gr100875945UNI AKIL GR Mr. george 30-21044102-无收获Greece Athens42apanagiotop AFOI ANAST.Mr. Andreas30-210-5753@micron Greece-43hk110808679LENSEN GROU Ms. ECHO ZH852-*******-无收获Hong Kong-44hk107341579shiv Market Mr. SINGH .852-*******@bandlc Hong Kong-45lehenghk Le Heng Int Ms. Ellen W852-852-267http://www.无收获Hong Kong-46hkfreshsour FRESH SOURC Mr. G. Chow852-2116-83http://www.无收获Hong Kong-47monarchintl Monarch Int Mr. Anand N852---23684http://www.francis@sta Hong Kong-48shingshunSHING SHUN Ms. PAMELA 852---25557http://www.marketing@s Hong Kong-49bandlcorpB&L CORPORA Mr. Jacky M00-852-2721@bandlc Hong Kong-Ms. Emily T852-2503-16http://www.palace@pala Hong Kong-50altradasia A LTRAD ASIA51rainbow3288CENTURY STA Ms. Noretta852-*******-frankfan@la Hong Kong-52amrex AMREX ELECT Mr. Sow-kee00-852-2314http://www.service@fir Hong Kong-53hopingelect Hoping Elec Mr. David L852-*******-无收获Hong Kong-54hk900601515Sunflower L Ms. Bernie 852-2-54449@swisse Hong Kong-55hk105187503Windex Inte Mr. Kate Lu852-28-6108-service@fir Hong Kong-56hk104689883Wonboat Ind Ms. Rebecca852-*******-无收获Hong Kong-57kitchenaven Force Manne Mr. Tommy H852-*******-sales@airmo Hong Kong-58hannssam Hanns Manuf Mr. Sam Lau852-*******http://www.sam@hanns.c Hong Kong-59printqualit Nppc Group Mr. Andy Ye852-0-31147http://www.无收获Hong Kong-60xanz2001Giles Enter Mr. Blaine 852-6017-36-service@fir Hong Kong-61ipowertdcI-power Hea Mr. Morris 852-*******-无收获Hong Kong-62hk100673188Hitstuffs L Mr. James C852-*******-无收获Hong Kong-63hk100980985S M I Co Lt Ms. Ida Li852-0-54964http://chin stc@super.n Hong Kong-Ms. Eileen 852-*******http://www.pv@linuo.co Hong Kong-64pioneertdc I power Grou65hk101203056Giles Enter Ms. Chloe C852-852-255-gilesgroup@Hong Kong-Ms. Chris Y852-*******http://kiny iris@kinyat Hong Kong-66newway1234N EWWAY ELEC67hk108766833Stone Sanit Mr. Stone t852-*******-yhdstone@yh Hong Kong-68hk100504373Hanns Manuf Mr. Sam Lau852-852-921http://www.sam@hanns.c Hong Kong-Mr. Frank L852-2539 58-info@hyatt-Hong Kong-69radicallab F ree-radica70hk107779606Mega World Mr. Chan Wa852-*******-mega1@mptma Hong Kong-71dhun L&C Housewa Ms. May Uba0086-10-650http://www.无收获China (Main Beijing 72onyxequipA C Trade L Mr. Robert +852-8121 0@ccherb Hong Kong-73hk100438545Elegant San Ms. sophy l852-*******-无收获Hong Kong-74hk102063332Gainful (HK Ms. Katheri852-0-39459-sales@hkwsi Hong Kong-75cynosure Cynosure Sa Ms. Sweety 86-768-6878http://www.howard@cyno China (Main Guangdong 76clindustria CL INDUSTRI Ms. Cherry 00-852-2670@clprod Hong Kong-77creativecon CREATIVE CO Ms. Shazia 852-2-77364-cihk89@yaho Hong Kong-Mr. Jackie 852-852-215http://www.enquiry@dgt Hong Kong-78oleviashow D RAGON GOLD79kajecochina KAJECO (CHI Mr. Suren C00-852-2522http://www.无收获Hong Kong-80rkinthk R. K. INTER Mr. Ramani 852---23655@phulha Hong Kong-81ywdns DNS TRADE C Mr. Garry D86-579-8517http://www.无收获China (Main Zhejiang 82euroeast EURO-EAST E Mr. Raj Bho852---23692http://www.sales@euroe Hong Kong-83profitcharm PROFIT CHAR Mr. Joe Min852-2753 62@dragon Hong Kong-84hkdowellltd DOWELL SCIE Mr. Xuedong852-00-3078-无收获Hong Kong-85electroplus Synix HK Lt Mr. Jacky C852-*******http://www.jacky@synix Hong Kong-86hk100356229OASIS SOURC Mr. Eyvind 852-*******http://www.ps@oasis-so Hong Kong-87hk102256752Mega World Mr. Isaac C852-852-270-info@megawo Hong Kong-88hk111939124EPRO ELECTR Mr. William852-*******http://www.eproexport@Hong Kong-89hk109990891Fl-Pk Mr. Jonson 852-*******-john.chan@a Hong Kong-90hk100896280Asiatech Ho Mr. Barry W852-*******-ahlhkltd@ne Hong Kong-91hk103729915KONSTAR IND Mr. KONSTAR852-0-27988http://www.marketing@k Hong Kong-92ranaechanGiles Enter Ms. Pinky A852-*******-jess_hui@sa Hong Kong-93hk116725549Choi Fung M Mr. Peter W852-*******@choifu Hong Kong-Mr. Louis c852-*******-bruce@bgspo Hong Kong-94bamboochar G oten Bambo95hondarayaHondaraya E Mr. Alvin L852-*******@hondar Hong Kong-Ms. Andy Wa852-3077-99-无收获Hong Kong-96weiyaowang T winsea Int97hk114124265Multi Prosp Mr. Sham St852-*******-mdept@mpphk Hong Kong-98alankan Set Win Gro Mr. Alan Ka852-*******@setwin Hong Kong-99hk106626136C-Tech Mr. DJ Zhan852-*******-wangksh@gma Hong Kong-100hk118179730Flying Worl Ms. Mannie 852-*******@flying Hong Kong-101hannsmfg Hanns Manuf Mr. Sam Lau852-921-668-kamto@catil Hong Kong-102maggiefr FILL RICH T Ms. Lau Mag852-852-233-hf@foodhf.c Hong Kong-103hk117321882ausewell el Ms. auswell852-*******-sales@aimin Hong Kong-104hk110957873Round Squar Mr. Andy La852-*******@Hong Kong-105ronaldyimPoking Indu Mr. Ronald 852-2326 01-无收获Hong Kong-Ms. Angel X86-755-8394http://www.sunraise@vi China (Main Guangdong 106szsunraise S UNRAISE CO107b-c B&C BUSSAN Ms. Polly C86-769-8786http://www.chunkuen@ch Hong Kong-Ms. susan s0086-593-29http://www.无收获China (Main Fujian108combogroup F LOPOWER IN109abound ABOUND INDU Mr. Hung Sz852-2614-19-cf@chapfung Hong Kong-110forun FORUN INTER Mr. Daniel 86-020-2899-toocle@nets China (Main Guangdong 111nayab NAYAB MANUF Mr. Naseer 85-2-364986http://www.无收获China (Main Guangdong 112miraclegrou MIRACLE GRO Ms. Cindy M00-852-3119-cindy@mirac Hong Kong-113sagarightSAGARIGHT L Ms. Elsa Fu852-2411-06http://saga sagaltd@net Hong Kong-114supremefact SUPREME FAC Mr. Chi Chu00-852-3105http://www.supreme@sdc Hong Kong-115fumgm PRO-ADV. CO Mr. Peter C852-852-254http://www.sales@adv-f Hong Kong-116hk100583393Junguo Inte Ms. Mannie 852-*******@flying Hong Kong-117hk107905405YPT Interna Mr. Jacky S852-*******http://www.ypt@techwin Hong Kong-118hk101750694Euro Suisse Ms. Tammy W00-852-2905http://www.service@fir Hong Kong-119yikico Yiki Compan Mr. Patrick852-*******-info@yiki.c Hong Kong-120hk100802553Chakwal Aut Mr. Sunny K852-0-92331-无收获Hong Kong-121hk100801256Meet Applia Mr. Prashan852-*******-support@ame Hong Kong-122hk109401505EBM Industr Mr. Johson 852-*******-kkhuang2002Hong Kong-123hk105424994Eastern Pla Mr. Ken Lee852-2872 14-无收获Hong Kong-124hk104541392Keentoop In Mr. Serein 852-2-14280http://www.cihk89@yaho Hong Kong-125orbitronics Orbitronics Mr. Dinesh 852-*******http://orbi purchase@or Hong Kong-126hkdoll Royalex Int Ms. AMY -852-*******-royalex@roy Hong Kong-127hk118722596Multiconcep Ms. Cathy W852-*******-annwong@mga Hong Kong-128joviechanOn Lap Home Ms. Jovie C852-2489 88-admin@auslo Hong Kong-129jicon JICON INDUS Mr. Chetan 91-22-28510http://www.无收获India Maharashtra 130oswalapplia OSWAL INDUS Mr. Vinod J91-11-27454@oswala India Delhi131in109092378SWASTIK APP Mr. Mitin J91-022-2579-无收获India Maharashtra 132in104487280BUVICO SPRA Mr. Vidhyak91-044-2382http://www.buvico@yaho India Tamil Nadu 133in113120396PRAYAG POLY Mr. Nitin A91-11-23583http://www.无收获India Delhi134in100976171TAPASYA ENG Mr. Sunil N91-22-25801http://www.sales@tapas India Maharashtra 135britsoap BRIT SOAP M Ms. Radhick91-022-6510http://www.britsoap@gm India Maharashtra 136gamzen GAMZEN PLAS Mr. Ashraf 91-22-23724http://www.abbas@gamze India Maharashtra 137premindcorp PREM INDUST Mr. Amrik S0091-183-50http://www.sales@premi India Punjab138priyaintern PRIYA INTER Mr. Babu La91-141-2331-at_jpr@yaho India Rajasthan 139kamalimpexi KAMAL IMPOR Mr. Raj Var91-253-2375http://www.sales@lotus India Maharashtra 140in107088373COSMOS CONS Mr. Mehul J91-020-2612http://www.无收获India Maharashtra141in104848650PM INDUSTRI Mr. Pravin 91-020-2769-无收获India Maharashtra 142in102575501MODERN ENGI Mr. Nayeem 91-022-2920@materi India Maharashtra 143in104939295KLEENAIR SY Ms. Neena P91-020-2544http://www.sales@kleen India Maharashtra 144in109799055ACCURATE SC Mr. Arvind 91-250-6452@asilab India Maharashtra 145in108757073Safari Cons Ms. Shama B91-2642-245http://safa contactus@s India Gujarat146in103582207FOUNDMATIC Mr. Jeganna91-44-24961http://www.foundmatic@India Tamil Nadu 147in100270376Priya Enter Mr. Amber B91-591-2435-yyounes@mhg India Uttar Prade 148in102050458REVA ENGINE Mr. B.K. Ch91-11-93118http://www.revaenginee India Delhi149aimtee AIMTEE MACH Mr. Mahesh 91-250-6452http://www.无收获India Maharashtra 150in100415051Cavier Bath Mr. Manoj J91-99789-62@cavier India Gujarat151in100057138Universal C Mr. saurabh91-20-24266http://ucmw usa@ucmworl India Maharashtra 152in105948258NAMDHARI EN Mr. Sir or 91-91 11 28-info@gnengi India New Delhi 153in100332909Wadhel Inte Mr. Raj Wad91-022-1234-kaushikvakh India Maharashtra 154in100396197Riddhi Phar Mr. HITEN S91-22-28321http://www.hitenkshah@India Maharashtra 155prismpharma PRISM PHARM Mr. Dilip P91-79-29095@prismp India Gujarat156visitglobal GLOBAL IMPE Mr. Dennis 0091-422-43http://www.mecdennis@g India Tamil Nadu 157startracelt STAR TRACE Mr. Maheswa91-44-26418http://www.sales@start India Tamil Nadu 158rhishikesh2RHISHIKESH Mr. Rahul C91-253-6600http://www.feedback@co India Maharashtra 159krishexport KRISH EXPOR Mr. Nikesh 91-22-22003http://www.sales@krish India Maharashtra 160ozonegenera FARADAY INS Mr. Vivek K91-422-4319http://www.sales@farad India Tamil Nadu 161in102268971ESTEEM INDU Mr. Mahendr91-1795-271http://este info@esteem India Himachal Pr 162alifoven A. R. ENTER Mr. Rizwan 91-22-25007http://www.amratvel@vs India Maharashtra 163shreejiindi SHREEJI INT Mr. Brij Ma91-22-28181@shreej India MaharashtraMr. VIJAY D91-145-2642http://kgne kgn_in_expo India Rajasthan 164kgnexports K GN EXPORTS165fourbrother FOUR BROTHE Mr. Amirtha91-44-42163http://www.fourbrother India Tamil Nadu 166in104731874PROPACK TEC Mr. Chintan91-22-25002@propac India Maharashtra 167in105038015LIDER SANIT Ms. Madhu P91-172-5053http://www.corporate@l India Chandigarh 168in102979647ATR ACOUSTI Mr. Ravi Si91-011-2739http://www.camusaquari India Delhi169mustafa84MACOMA HARD Mr. Mustafa91-22-29672http://www.macoma@vsnl India Maharashtra 170in100976452TRACK MANUF Mr. Pradeep91-11-23070http://www.fieo@nda.vs India Delhi171in105431385KDR INDUSTR Mr. Ram Bih91-22-25964http://www.kdrindustri India Maharashtra 172in101331958SHIVA KITCH Mr. Ashok S91-33-22319@shivaa India West Bengal 173in104540152ASSOCIATED Mr. Jatin A91-11-23521http://www.asew@bol.ne India Delhi174squarepharm SQUARE PHAR Mr. Chandra91-22-2847 http://www.sales@squar India Maharashtra 175in101460109S.S. PHARMA Mr. m.s.raj91-22-28783-ss_pharma@i India Maharashtra 176in104531931TECHNO INST Mr. Amritpa91-097-1761-无收获India Delhi177in105258241SIM SIM TRA Ms. Palak S91-22-40589http://www.sales@remil India Maharashtra 178sharadenter SHARAD ENTE Mr. Sharad 91-291-2785http://www.devkripa@si India Rajasthan 179is110016513PRECIKOT PH Mr. Pranav 91-250-6459http://www.sales@preci India Maharashtra 180in100241776SHREE ENGIN Mr. Vinod K91-422-2669http://www.bipin.naik6India Tamil Nadu 181dheeraje H.L. SCIENT Mr. YOGESH 91-171-2643-dheerajhl@g India Haryana182amaind Industrial Mr. Iqbal H91-712-2768http://www.amagroup_ng India Maharashtra 183in105334725Agrawal Int Mr. jagmoha91-2717-241http://agra info@manish India Gujarat184in117246866Aryaman Int Mr. YAGNESH91-261-2233@aryama India Gujarat185in109407252British Eng Mr. Harpree91-172-4614http://www.corporate@l India Chandigarh 186monitaindco Monita Indu Mr. Chandru91-022-2411http://www.sales@monit India Maharashtra 187in100861805Pan Fuel Te Mr. jeetu p91-0891-325http://www.irwantheman India Andhra Prad188in104147278Bright Ente Mr. ujjwal 91-22-29672http://www.macoma@vsnl India Maharashtra 189in118669121J F Industr Mr. Jude Ar91-22-25231http://www.abdul_rafee India Maharashtra 190in118220824rico home a Mr. rakesh 91-22-24102http://www.sales@rico.India Maharashtra 191in100812864Global Impe Mr. A. Den91-422-4372-blockmachin India Tamil Nadu 192in105040747KUMAR EQUIP Mr. Rajesh 91-11-25334http://www.service@kum India Delhi193in102732102E M G Indus Mr. Mohana 91-0422-262http://www.sales@e-m-i India Tamil Nadu 194hganda AGP GAS CON Mr. harshva91-11-41486@agp.co India Delhi195aravindarao Kamaljeeth Mr. Dr. Ara91-824-2217http://www.kamaljeeth@India Karnataka 196in100531372SURYODAY EN Mr. panchal91-079-2562http://www.grievances@India Gujarat197alkainterna Alka Intern Mr. Ratan K91-542-2588-hagency@gma India Uttar Prade 198jfbangalore J. F. Indus Mr. J.F.IND91-0-994570http://www.无收获India Maharashtra 199in901553502Lokpal Indu Mr. Navneet91-120-3065-info@lokpal India Uttar Prade 200hydrill2006HYDRILL EQU Mr. KANDASA91-422-2573http://hydr hydrill@air India Tamil Nadu 201in104276412JVP Equipme Mr. Jagades91-422-2331http://jvpe无收获India Tamil Nadu 202in100264969Chamunda Ph Mr. Eng.Bha91-79-25842@chamun India Gujarat203in102014947ESSGEE Expo Mr. Ganga S91-22-25901http://www.sales@sgexp India Maharashtra 204technova1Technova Th Mr. Devang 091-2528-22-devang_drd@India Maharashtra 205in103578232ELECTROMAX Mr. Robin G91-171-2540@electr India Haryana206in104519501Access Indi Mr. Access 91-171-4009-rajeev_laul India Haryana207in103234263Softel Mach Mr. Sameer 91-2836-329http://www.softel@wiln India Gujarat208in107740637Connect App Mr. VAIBHAV91-22-65211@connec India Maharashtra 209in109432700Leema Indus Mr. sunny g0091-0171-2@lumixi India Haryana210shykusum Shyam Kusum Mr. Shyam S91-512-2581-plastindia@India Uttar Prade 211sundeeptann Dhyani Engi Mr. sundeep91-022-2778-ksint@citec India Maharashtra 212in100282759Rhishikesh Mr. Travis 91-253-2383http://cons feedback@co India Maharashtra 213in101681737Daybreak Te Mr. Uday Sa91-22-28241@daybre India Maharashtra 214in107764467Accurate En Mr. Sir or 91-91-2362-http://www.industriali India-215in107206029Vijay Surgi Mr. Vijay P91-79-22200-vsew2002@gm India GujaratMr. Mahesh 91-281-6592http://www.无收获India Gujarat216bmdexports B md Exports217in100348482KERRON phar Mr. ankit b91-02355-68-zs@jiefu.co India Maharashtra 218in100280414Atom Machin Mr. Bhavik 91-278-2439-atom.servic India Gujarat219in100281885Analytic In Mr. Vikas J91-989-6044http://www.analyticins India Haryana220in100266162Amrit Elect Mr. Kamalde91-92105212-you@yahoo.c India Delhi221in100978243VANDANA HOM Mr. Mukesh 91-98100198-services@pc India Delhi222in101618147bhavana tra Mr. dharmis91-022-2501http://www.dharmishmeh India Maharashtra 223in112987912Bajaj Appli Mr. Balaji 91-44-26746-gladinterna India Tamil Nadu 224in107765719Swati Appli Mr. Sir or 91-171-2654http://www.purnima_ent India Haryana225in100739485Aston Marke Mr. Mayur P91-972-5009-s.j.bonnaud India Gujarat226in101195704RV ENTERPRI Mr. Abhinav91-92516141-abhi.chhapa India Rajasthan 227in101002045Atico House Mr. Kunal C91-903-4949-info@aticol India Haryana228in105924097Ambica Sale Mr. Sir or 91-91 22 28@ambica India-229clalapplian c lal assoc Mr. Rakesh 91-11-32101-swastik2@et India Haryana230in105318524MAYFAIR INT Mr. Girish 91-22-23521http://www.marvel@marv India MaharashtraMr. Rajesh 91-2822-240@romili India Gujarat231romilimpex R OMIL IMPEX232in102925451BHALARIA ME Mr. Vijay B91-022-2819http://www.exports@bha India Maharashtra 233mayurexport MAYUR EXPOR Mr. Namit B91-291-2742http://www.admin@mayur India Rajasthan 234protonengin PROTON ENGI Mr. Hiren P91-79-29292@proton India GujaratMr. Chaitan91-171-6535http://www.maximus@nsi India Haryana235racexports R A C EXPOR236jansonsandc JANSONS & C Mr. Adnan T91-591-2490http://www.jansons@san India Uttar Prade 237kamaal786KAMAAL SOUV Mr. Mustuja91-591-2493-himadri1@vs India Uttar Prade 238psaw84POPULAR SCI Mr. S.P. Ve91-171-2600http://www.psawindia@s India Haryana239psdaima P.S. DAIMA Mr. Sushil 91-11-25254http://www.sushil.daim India Delhi240hennamanufa S M HEENA I Mr. Ompraka91-2960-223http://www.smhenna2004India Rajasthan 241in103536253SWAGATH URE Mr. Sudhans91-40-27123@swagat India Andhra Prad 242in108005241DIVYANSH ED Mr. A Kumar91-171-3245http://www.aruman786@y India Haryana243pavanmg UMA PLASTOW Mr. Pavan M91-20-27454http://www.pmg@umaplas India Maharashtra 244in101315973G.M. CREATI Mr. Rajeev 91-562-4001http://marb info@marble India Uttar Prade 245in104528396GUJARAT FAB Mr. Vinod K91-079-2583@netser India Gujarat246in103582555LAXMI EN-FA Mr. Suresh 91-79-25890xmienfab@India Gujarat247shardakanti SHARDA CORP Mr. Kantila91-22-22425http://www.khm@sharda.India Maharashtra 248in110629456STAR TRACE Mr. Maheswa91-44-26418http://star无收获India Tamil Nadu 249lovsonindus LOVSON INDU Mr. Keyur N91-22-22065http://www.lovson@bom5India Maharashtra 250in100698763DIVINE INTE Mr. Nitin B91-11-23519http://www.webnetintl@India Delhi251roslanemedi ROSLANE MED Mr. Jeetend91-171-2698http://www.roslanemedi India Haryana252jaicomet ACE PROCESS Mr. Vipul J91-22-40214http://www.aceeqpt@yah India Maharashtra 253sukhsa SUKHSA EXPO Mr. Radhey 91-141-2352@sukhsa India Rajasthan 254in105623749ZYMO COSMET Mr. Tarak P91-2764-268@zymo.i India Gujarat255in102855707SHIVA PRODU Mr. Vijay D91-22-28763http://www.contact@shi India Maharashtra 256in102502157FANS BRO ER Mr. Vidyadh91-022-2845http://www.response@fa India Maharashtra 257in102378260KOOJAN HYDR Mr. Rama Ra91-40-23091http://www.koojanhydra India Andhra Prad 258balajiwetgr Sri Balaji Mr. RAMESH 91-40-27543http://www.rameshr1974India Andhra Prad 259in110285353MAG Househo Mr. Anubha 91-11-41579-swastik2@et India Delhi260in104284327Essgee Expo Mr. Ganga S91-22-25901http://www.sales@sgexp India MaharashtraMr. Alkesh 91-281-2223-janakflora@India Gujarat261sunnymixer v enus home262apexhomeapp Apex Home A Ms. Kinjal 91-22-25774http://www.ric1@vsnl.n India Maharashtra 263plumberindi AQUA PLUMBI Mr. Devendr91-565-2530-plumberindi India Uttar Prade 264in118294074Ducon Proje Mr. Rohit G91-22-21730@duconp India Maharashtra 265in105025709Switech Ind Mr. Rajinde91-11-47063@switec India Delhi266in104889941Inalsa Mr. Khushee91-120-4016http://www.ial@inalsa.India Uttar Prade 267rajesh21Span Mark-n Mr. Rajesh 91-22-26853http://www.maggiindia@India Maharashtra 268shumseximShums Exim M r. shabbir91-79-30613-shabbirshum India Gujarat269dennexports Denn Export Mr. vinod a91-11-23221@dennex India Delhi270stanleyexpo Stanley San Mr. Rajan M91-94170-04-无收获India Punjab271hovertexpor Hovert Expo Mr. Patel B91-79-28543-hipltd@ad1.India Gujarat272in105934231HANS RAJ MA Mr. Amit Ma91-91 181 2-无收获India-273in101170915Kitten Ente Mr. Madhav 91-22-27649@kitten India Maharashtra 274in100485033Chhaya Ente Mr. Nitin P91-022-2847@chhaya India Maharashtra 275sumitsethia elin electr Mr. sumit s91-832-2783-elintdm@ndf India Goa276in107271276Saranag Soa Mr. Dr.B.A.91-474-9847-无收获India Kerala277in100918982bhagyashree Mr. lokesh 91-022-2566-bhagyashree India Maharashtra 278in100444255CLARION HOM Mr. ashwani00-91-98101-etacom@iam.India Delhi279in105929021Finebearing Mr. Sir or 91-91 422 2-finebearing India Tamil Nadu 280in100352812Commander W Mr. Ajeet 91-022-2847http://www.mumbai@comm India-281allianceimp Alliance Im Mr. Rizwan 91-22-23414-autoallianc India Maharashtra282in117600102MECH TECH M Mr. rakesh 91-265-3934-jitendransh India Gujarat283in102681590INDUSTRIAL Mr. Rajput 91-079-2563-无收获India Gujarat284glassagenci Glass Agenc Mr. Anil Ch91-171-2633http://www.glass@sanch India Haryana285in100392499Globe Hydra Mr. Manoj P91-120-2606http://glob globe_hydra India Uttar Prade 286in117554984Rising Impe Mr. Taher K91-98203617-info@rising India Maharashtra 287in101138978Beauty Tric Ms. Rahamat91-0251-230-无收获India Maharashtra 288in108518514Venkateswar Mr. Muthiah91-044-2620http://www.online@cons India Tamil Nadu 289ravishjeeSita Group Mr. R KUMAR91-562-4003http://www.ceo@leonard India Uttar Prade 290atul1963M/S. Jalar Mr. ATUL SH91-44-26422-domains@ind India Tamil NaduMr. RAJESH 91-22-26853-rajesh21@vs India Maharashtra 291maggiindia S WARAJ INDU292jayesh75Satyam Elec Mr. Gaurang91-2822-231-md@aalulu.c India GujaratMr. Vishal 91-8738-236-520315@gmai India Andhra Prad 293sirsilkltd A apeeshipbr294in104573212Glad Intern Mr. Rajagop91-044-9094-无收获India Tamil Nadu 295in100681615a3g technol Mr. Arun ku91-120-4117-oulindz@gma India Delhi296in115961471Surendera A Mr. surende91-011-2352-camusaquari India Delhi297in108869037Razzaq A.Me Mr. Razzaq 91-278-2521-beamamb@gma India Gujarat298in107454011Shree Hydra Mr. Pradeep91-422-2403-hari.eng07@India Tamil Nadu 299in104804506ABSHA MACHI Mr. Shareef91-44-22382http://www.shareef@abs India Tamil Nadu 300in108166802Boss Electr Mr. jitendr91-022-2872http://www.sales@bossp India Maharashtra 301in100801103SOUTHERN IN Mr. shivana91-988-6176-无收获India Karnataka 302in102901159Sanghvi Met Mr. Gunvant044-2536986-sanghvimeta India Tamil Nadu 303in102963753MARVEL HOME Mr. NILESH 91-281-2228HTTP://WWW.rachealhart India Gujarat304in103872401vijay ranin Mr. vijay r91-281-2452-无收获India Gujarat305sajidsaifi0ASIAN MOULD Mr. sajid s91-0171-254http://www.无收获India Haryana306in103817686NAVIE TEKNO Mr. Nataraj91-422-2241-navietek@na India Tamil Nadu 307binitmishra Mishra Trad Mr. Binit M91-11-26521-everpower@s India Delhi308in100164196OM INTERNAT Mr. MADHAVA91-0-938281-surat@omint India Tamil Nadu 309in100626892prabha trad Mr. venkate91-98412800-sales@spotb India Tamil Nadu 310maildeepakg Allied Synd Mr. Deepak 91-080-4153-allylive@al India Karnataka 311in105704661Maharaja Wh Mr. Sunil B91-011-9868http://maha contact@mah India Delhi312id115994774chic decor Mr. Semar W62-21-30143-无收获Indonesia-313id107554394Harapan Tek Mr. Harapan62-021-6905-无收获IndonesiaJakarta Ray 314monwilm PT. Passima Ms. Monawil62-81-70708-dedicahyadi IndonesiaJakarta Ray 315id100701352MAJU SELARA Mr. SULAIMA62-21-98849http://www.flower@gyrm IndonesiaBanten316id901844702Clean n Hea Mr. Mikael 62-22-61356-无收获IndonesiaPropinsi Ja 317id111004610PT. Daya En Mr. supiyan62-061-8361-dis@diswebp IndonesiaPropinsi Su 318id110096940CV. Mesin A Mr. Johanne62-251-7543http://www.karyamitrau IndonesiaPropinsi Ja 319ir107654368karasanatMr. alireza98-21-88843@karasa Iran (Islam Iran320mehrzadeghb Segal Azar M r. Mehrzad98-411-5537http://sega info@segala Iran (Islam-321pc19Parsazma Mr. Usef Ja98-021-8740http://www.a@,Iran (Islam Tehran322ir101040040Lider-Hydra Mr. PASHA H98-919-1623-aytekinevci Iran (Islam Asia323ie102013643Letterkenny Mr. Martin 353-86-8200http://www.service@fir Ireland Donegal324il106204329SILMET Ms. Ronit T972-3-53314@silmet Israel Israel325dario4UNITEX SRL M s. Mary Yr39-0434-718http://www.mail.unitex Italy Pordenone ( 326it101179677L.MAGISTRO Mr. Gianfra39-015-5133-g.chinellat Italy Novara327carlandrea2Uniteco S.r Mr. carlo l39-011-7710http://www.sales@uniro Italy Italy328it100334168ONDA DESIGN Mr. Stefano39-030-8726-info@bm-ber Italy BS329davide16Snaxpand Mr. Davide 39-444-2394-info@maks-a Italy veneto330carlobot BELLAITALIA Mr. Carlo B39-438-2500@bella-Italy TV331it105735669MA-FRA S.P.Ms. Sabrina39-02-35699@mafra.Italy Milan332it118727839Savioli Lel Ms. Brunell0039-0541-6http://bone无收获Italy Rimini333ceruttigiov cerutti gio Mr. Salvato39-0322-836-info@frison Italy ItalyMs. DANIELA39-0362-239-sasoap@saso Italy Italy334sasmariani S AS MARIANI335colomboandr AC Soap Mac Mr. Andrea 39-338-5263@acsoap Italy Italy336it104981965SIAN GESTMs. ANNA PA39-333-8755http://www.无收获Italy Italy337mfsnc MF SNC Mr. gabriel39-0445-560-jeremy@jere Italy Vicenza, It 338jp100262900Tomosada Ke Mr. Norihik81-66784-65http://www.无收获Japan Osaka339excavatorM'S CO.Mr. Hiromit81-52-77861@ms-ken Japan Aichi340jp118248212NIKKO SEIKI Mr. daisuke81-748-3775http://www.无收获Japan Shiga341kanazawayok KANAZAWA YO Mr. Tomo Ur81-76-23945http://www.无收获Japan Ishikawa 342jp901277791SUZUKA ENGI Mr. Tatsuo 81-59-34647@suzuka Japan Mie343sshjapan S.S.H. JAPA Mr. Sajeev 81-3-5491-0http://www.无收获Japan Tokyo344wadakenzoDATACORP IN Mr. Kenzo W81-6-639973-datacorp@ju Japan Osaka345jp107492193NISSAN DIES Mr. H. OKAZ81-3-668487http://www.无收获Japan Tokyo346jp106794048G-TRADING C Mr. Tadashi81-3-686062http://www.marvinglove Japan Tokyo347jp117178567Kinki Truck Ms. Yumi Na81-78-30476http://www.global@kink Japan Hyogo348jp105977535OSAKA CHEMI Mr. Sir or 81-81 6 631-service@shy Japan-349yasukichija YASUKICHI C Mr. Takuya 81-584-7192http://www.yasukichi@y Japan Gifu350jp101988238GLOBAL STAR Mr. Dushant81-3-6868-3http://www.sales@gs-li Japan2-11-2 Taka 351dretec DRETEC CO.,Mr. Norihit81-48-96155http://www.无收获Japan Saitama352jp112680517SUEMATSU BR Mr. Kyoji S81-6-630328http://www.suematsu1@g Japan Osaka353jp101348089GLOBAL ACQU Mr. Ranil L0081-4-4567http://www.无收获Japan Kanagawa 354jp109605753TK-TRADING M r. Miho Ka81-42-73562-sales@tktra Japan Tokyo355mehervanset IMPERIAL TR Mr. Bhugwan81-078-3278http://www.无收获Japan-356jp108267306USHIKU SANK Ms. Sakiko 81-29-87205http://www.无收获Japan Ibaraki357jp116015389OMAR TRADIN Ms. Tamami 81-480-2937http://www.无收获Japan SaitamaMr. mukai m81-0729-655http://www.无收获Japan Osaka358mukaitrade M ukai Tradi359jp100005601DAICHI CO.,Mr. Koichi 81-45-62809http://daic info@daichi Japan Kanagawa 360jo104151628FUTURE BEAC Mr. DAWUD A962-6-53498http://www.dawud@futur Jordan Amman361jo100868869MH Group Mr. Mutaz A962-6-53315http://www.mhgroup@cyb Jordan Amman362lv100203307CitaKo Mr. Igor Fr371-6-71677@citako Latvia Latvia363alfaprim BAUMAR Mr. Elmars 371-6-73702http://www.office@baum Latvia Riga364lb100476593OFFICE INVE Mr. ALI DIK961-70- 604-tours@conco Lebanon Beirut365lb117598569BIMATIC - A Mr. Khaled 961-1-65577http://www.emalkoun62@Lebanon-366lb100097423Nour Compan Mr. Hassan 961-3-20135-info@nourel Lebanon Beirut367lt104520408BT group Mr. BT grou370-650-775-kibnmflor@j LithuaniaLithuaniaMr. Eddy Fo60-03-32411http://www.enquiry@khi Malaysia Selangor 368lathasocka K hind Mistr369my105899774EIK SENG MA Mr. Chris O60-04-33263http://www.vinson_ooi@Malaysia Penang370my900613354name; weifa Mr. micky m60-102-9149-无收获Malaysia Block D 4 B 371my109186147Ample Asia Mr. Ample A60-4-507872-sales@ent.c Malaysia Penang372my106205076BESTONE ELE Mr. Sir or 60-603-8943http://www.无收获Malaysia-373awteh DYKAS INDUS Ms. Aiwee T60-3-312264http://www.enquiry@dki Malaysia Selangor 374nlscientifi NL SCIENTIF Mr. Chua BP60-3-329011http://WWW.sales@nl-te Malaysia Selangor 375mariusk LINK INTERN Mr. Ross Ma603-77-2769http://www.betty@linki Malaysia-。
Customers I find
1117-a apacible st.,paco,m anila miketejum al2001@y MICHAEL TEJUMAL
(63)2 4007707/9 16497254 8 (63)2 5214586 IRSIndustrie Riunite Spalmati
Afri
ca
buye
r
MES
纺织、皮革
、羽绒 11
OKOAWO 00234 1
2668907/2 mactonys
@yahoo.co ART
2 LEATHER
12
abobaker artleather
@arabia.c Tel:(20)2
3656993 Art
3 Leather,
12 MAEVX.IACLAONPAEZ MTAETLE:O5S2709 4a7v8.uEn-iver
13 sidad
col.romer o DE TERREROS, COYOACAN, MEXICO ,C.P.0435 0,
011-506-2243208
多米尼加共和国
墨西哥 退回
退回
TEL/FAX:5 6585427,E MAIL:osan toyo@todi 装 饰品
comercial @eximpoin .br Marco de Paula
Brazil 退回
http://e ximpoint .com.br/ site/ind ex.php SHL COMERCIA 17 L LTDA rua herval 497 ap.103b,belem cep:0306 2000,sao paulo SI LI SI contato@ deltabc. com.br / rvjorge@ rvjorge. com (55)11 33263070 ： (55)11 33133477 D.F.S. GIFTS VANCOUVE 18 R INC. pacific centre, k#2, 700 west georgia st., vancouve r, b.c. rezagola bi@hotma RAZEE GOLABI OSKUEI
NYT2137-2012(食用)农产品市场信息分类编码(前三级)
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
品种名称 分类级别 一级编码 二级编码 三级编码 四级编码 五级编码 六级编码 粮食 1 01 00 00 00 00 000 谷物 2 01 01 00 00 00 000 水稻 3 01 01 01 00 00 000 小麦 3 01 01 02 00 00 000 玉米 3 01 01 03 00 00 000 大麦 3 01 01 04 00 00 000 燕麦 3 01 01 05 00 00 000 荞麦 3 01 01 06 00 00 000 栗 3 01 01 07 00 00 000 高粱 3 01 01 08 00 00 000 其他谷物 3 01 01 99 00 00 000 豆类 2 01 02 00 00 00 000 大豆 3 01 02 01 00 00 000 绿豆 3 01 02 02 00 00 000 赤豆 3 01 02 03 00 00 000 蚕豆 3 01 02 04 00 00 000 其他豆类 3 01 02 99 00 00 000 薯类 2 01 03 00 00 00 000 马铃薯 3 01 03 01 00 00 000 甘薯 3 01 03 02 00 00 000 木薯 3 01 03 03 00 00 000 其他薯类 3 01 03 99 00 00 000 油料 1 02 00 00 00 00 000 油菜 2 02 01 00 00 00 000 油菜子 3 02 01 01 00 00 000 油菜子毛油 3 02 01 02 00 00 000 油菜子色拉油 3 02 01 03 00 00 000 油菜子调和油 3 02 01 04 00 00 000 花生 2 02 02 00 00 00 000 带壳花生（干） 3 02 02 01 00 00 000 带壳花生（鲜） 3 02 02 02 00 00 000 花生仁 3 02 02 03 00 00 000 花生毛油 3 02 02 04 00 00 000 花生色拉油 3 02 02 05 00 00 000 花生调和油 3 02 02 06 00 00 000 芝麻 2 02 03 00 00 00 000 芝麻子 3 02 03 01 00 00 000 小磨香油 3 02 03 02 00 00 000 机制香油 3 02 03 03 00 00 000 大豆 2 02 04 00 00 00 000 大豆子粒 3 02 04 01 00 00 000 大豆毛油 3 02 04 02 00 00 000 大豆色拉油 3 02 04 03 00 00 000 大豆调和油 3 02 04 04 00 00 000 其他油料 2 02 99 00 00 00 000 向日葵 3 02 99 01 00 00 000 胡麻 3 02 99 02 00 00 000 棉子 3 02 99 03 00 00 000 棕榈 3 02 99 04 00 00 000 油橄榄 3 02 99 05 00 00 000
万能查询(想查什么都可以,太强大了).
身份证号码查询 /idcard.aspxIP地址查询手机所在地查询/火星文在线转换，繁体/简体字转换http://www.h /EMS全球快递邮件号查询/search.asp?id=6084中国高等教育学历网上证书查询/xlcx/中国黄历查询，就是查每日吉凶.tw/万年历查询（包括纪念日，节假日查询）/calendar /全国邮政业务资费（去邮局别让人蒙了啊）/folder9/fo lder95/全国主要城市地图查询/map/全国列车时刻查询/trai n/世界主要城市同步时间查询/worldclock/各国货币汇率换算/curr ency-converter/免费在线翻译（支持30种语言）/ss/fy.htm国内邮政编码、长途电话区号查询http://w /postal/在线免费度衡量换算转换器/unit-converter/[url=/chinese-converter/][/url]搜索引擎收录情况、网站反向链接在线查询/search_engine/人体生物钟周期在线查询/search/zhouqi.htm人体疾病查询及医院药品大夫查询，这个有趣啊/medisearch.html手机型号，价格产地查询/phone/API函数在线查询大全/pc/program/ap iquery.htm全球当日股票行情查询/cgi-bin/stock/ quote/lookup.cgi全球黄页在线查询http://www.bridge69.co m/365/sw/yellow.htm商务查寻类[酒店预定]/chinese/hotel.htm[中国专利检索]http:/ //365/sw/1-2china-zhuanli.htm[国际专利检索]http:/ //365/sw/1-3guoji-zhuanli.htm[外汇牌价]http://202.102.239.182/hl/llhlcx.asp[邮编电话区号]http:/ //yzbm/index.asp?sm=%D5%E3%BD%AD[法律法规查询]http://202.99.23.199/home/begin.cbs[股票行情查询]/gtja/quotation/stock.jsp[国内著名网站][数码相机报价]/365/sw/2-1shuma.htm[农产品价格查询]/365/sw/2-2nongchanpin.htm [火车时刻查询]/365/sw/2-3train.htm[中关村在线价格查询]/365/sw/2-4zhongguancun.htm [药品价格查询]/365/sw/2-5yaoping.htm[国内航班查询]/365/sw/2-6plane.htm[汽车报价查询]/365/sw/2-7car.htm[建材价格查询]/365/sw/3-1jiancai.htm手机真假验正/365/sw/3-2mobphone.htm [关税查询]/365/sw/3-3guanshui.htm [WTO信息查询]/365/sw/3-4wto.htm[法律查询][国际区号查询]/365/sw/3-6guoji.htm 实时航班动态/365/sw/3-7shishi.htm [展会查询]/365/sw/3-8zhanhui.htm。
FM Approvals LLC. Certificate of Conformity for 91
To verify the availability of the Approved product, please refer to THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGEHAZARDOUS (CLASSIFIED) LOCATION ELECTRICAL EQUIPMENT PER US REQUIREMENTS 2. Certificate No:FM16US0465X3. Equipment:(Type Reference and Name)9106B Hart transparent repeaters and 9107B Hart transparent drivers 4. Name of Listing Company:PR electronics A/S5.Address of Listing Company:Lerbakken 10 Roende DK-8410 Denmark6.The examination and test results are recorded in confidential report number:3044327 dated 13th December 20117.FM Approvals LLC, certifies that the equipment described has been found to comply with the following Approval standards and other documents:FM Class 3600:2011, FM Class 3610:2010, FM Class 3611:2004, FM Class 3810:2005,ANSI/ISA 60079-0:2009, ANSI/ISA 60079-11:2009, ANSI/ISA 60079-15:2009, ANSI/ISA 61010-1:20048. If the sign ‘X’ is placed after the certificate number, it indicates that the equipment is subject to specific conditionsof use specified in the schedule to this certificate.9. This certificate relates to the design, examination and testing of the products specified herein. The FM Approvalssurveillance audit program has further determined that the manufacturing processes and quality control procedures in place are satisfactory to manufacture the product as examined, tested and Approved.10. Equipment Ratings:Nonincendive for use in Class I, Division 2, Groups A, B, C, D with intrinsically safe connections to Classes I, II, III, Division 1, Groups A, B, C, D, E, F, G Hazardous (Classified) Locations.Nonsparking for use in Class I, Zone 2, Group IIC with intrinsically safe connections to Class I, Zone 0, Groups IIC/IIB/IIA Hazardous (Classified) Locations..Certificate issued by:20 December 2016J. E. MarquedantManager, Electrical SystemsDate11. The marking of the equipment shall include:9106Bab HART Transparent RepeaterClass I Division 2, Groups A, B, C, D; T4,Provides IS outputs to Class I, II, III, Division 1/2, Groups A, B, C, D, E, F, GClass I, Zone 2, AEx nA nC [ia] IIC T4Ta = -20°C to +60°CInstallation Drawing: 9106QF019107Ba HART Transparent DriverClass I Division 2, Groups A, B, C, D; T4,Provides IS outputs to Class I, II, III, Division 1/2, Groups A, B, C, D, E, F, GClass I, Zone 2, AEx nA nC [ia] IIC T4Ta = -20°C to +60°CInstallation Drawing: 9107QF0112. Description of Equipment:General - The 9106B Repeaters and 9107B Drivers are new modules for the 9000 series and are available in one channel or two channel versions. They are rail mounted 24 V powered isolating barriers that serve as a repeater and isolator respectively for 4...20 mA signals with HART communication. Both the 9106B and 9107B provide potential free contacts for status indication. The modules are supplied via terminals at the top of the module or via Power Rail Type 9400. The removable display module 4501 can be used for programming the repeater and the driver. The manufacturer’s specified ambient temperature range is -20 °C to +60 °C.Ratings - The 9106B Hart transparent repeaters and 9107B Hart transparent drivers are rated for use in a process temperature range of -20°C to +60°C.9106Bab. HART Transparent Repeatera: Barrier (1 = 27.5V barrier; 2 = 25.3V barrier)b: Channels (A = Single; B = Double)AIS/I, II, III/1/ABCDEFG – 9106QF01; EntityNI/I/2/ABCD/T4; -20°C ≤ Ta ≤ 60°CI/2/AEx nA nC [ia] IIC T4; -20°C ≤ Ta ≤ 60°C - 9106QF01Entity Parameters:Loop Current Source: Channel 1 (Terminals 43, 44), Channel 2 (Terminals 53, 54)Loop Current Source 1 to 2: Channel 1 (Terminal 44), Channel 2 (Terminal 52)9106B1b: Uo (Voc) = 27.5V, Io (Isc) = 92.6mA, Po = 0.64WA, B or IIC C, E, F or IIB D, G or IIACo 0.084µF 0.670µF 2.24µFLo 4.14mH 16.58mH 33.17mH9106B2b: Uo (Voc) = 25.3V, Io (Isc) = 96mA, Po = 0.61WA, B or IIC C, E, F or IIB D, G or IIACo 0.104µF 0.818µF 2.85µFLo 3.85mH 15.43mH 30.86mHLo/Ro - 234µH/Ω468µH/ΩExternal Current Source: Channel 1 (Terminals 41, 42), Channel 2 (Terminals 51, 52)Ui (Vmax) = 30V, Ii (Imax) = 120mA, Pi = 0.85W, Ci = 2nF, Li = 0External Current Source: Channel 1 (Terminal 42), Channel 2 (Terminal 51)Ui (Vmax) = 30V, Ii (Imax) = 120mA, Pi = 0.85W, Ci = 4nF, Li = 09107Ba. HART Transparent Drivera: Channels (A = Single; B = Double)AIS/I, II, III/1/ABCDEFG – 9107QF01; EntityNI/I/2/ABCD/T4; -20°C ≤ Ta ≤ 60°CI/2/AEx nA nC [ia] IIC T4; -20°C ≤ Ta ≤ 60°C - 9107QF01Entity Parameters:Loop Current Source: Channel 1 (Terminals 41, 42), Channel 2 (Terminals 51, 52)Uo (Voc) = 28V, Io (Isc) = 93mA, Po = 0.65WA, B or IIC C, E, F or IIB D, G or IIACo 0.08µF 0.650µF 2.15µFLo 4mH 16mH 32mH13. Specific Conditions of Use:9106Bab HART Transparent Repeater1. In Class I, Division 2 installations, the subject equipment shall be mounted within a tool-secured enclosurewhich is capable of accepting one or more of the Class I, Division 2 wiring methods specified in the National Electrical Code (ANSI/NFPA 70).2. In Class I, Zone 2 installations, the subject equipment shall be mounted within a tool-secured enclosure whichis capable of accepting one or more of the Class I, Zone 2 wiring methods specified in the National Electrical Code (ANSI/NFPA 70). The equipment shall be installed in an enclosure with a minimum ingress protection of IP54 unless the apparatus is intended to be afforded an equivalent degree of protection by location.3. Install in environments rated Pollution Degree 2 or better; overvoltage category I or II.4. Removable Display Module 4501, when connected, may not be damaged and shall be free of dust andmoisture.9107Ba HART Transparent Driver1. In Class I, Division 2 installations, the subject equipment shall be mounted within a tool-secured enclosure2. In Class I, Zone 2 installations, the subject equipment shall be mounted within a tool-secured enclosure whichis capable of accepting one or more of the Class I, Zone 2 wiring methods specified in the National Electrical Code (ANSI/NFPA 70). The equipment shall be installed in an enclosure with a minimum ingress protection of IP54 unless the apparatus is intended to be afforded an equivalent degree of protection by location.3. Install in environments rated Pollution Degree 2 or better; overvoltage category I or II.4. Removable Display Module 4501, when connected, may not be damaged and shall be free of dust andmoisture.14. Test and Assessment Procedure and Conditions:This Certificate has been issued in accordance with FM Approvals US Certification Requirements.15. Schedule DrawingsA copy of the technical documentation has been kept by FM Approvals.16. Certificate HistoryDetails of the supplements to this certificate are described below:Date Description13th December 2011 Original Issue.20th December 2016 Supplement 1:Report Reference: – RR207607 dated 20th December 2016Description of the Change: Update to Installation Drawing for increased Lo values. Updated Certificate to Latest format.To verify the availability of the Approved product, please refer to THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGEHAZARDOUS LOCATION ELECTRICAL EQUIPMENT PER CANADIAN REQUIREMENTS 2. Certificate No:FM16CA0213X3. Equipment:(Type Reference and Name)9106B Hart transparent repeaters and 9107B Hart transparent drivers 4. Name of Listing Company:PR electronics A/S5.Address of Listing Company:Lerbakken 10 Roende DK-8410 Denmark6.The examination and test results are recorded in confidential report number:3044327 dated 13th December 20117.FM Approvals LLC, certifies that the equipment described has been found to comply with the following Approval standards and other documents:CSA-C22.2 No. 157-92:2006, CSA-C22.2 No. 213-M1987:2008, CSA-C22.2 No. E60079-0:2007, CSA-C22.2 No. E60079-11:2002, CSA-C22.2 No. E60079-15: 2002, CAN/CSA-C22.2 No. 61010-1:20048. If the sign ‘X’ is placed after the certificate number, it indicates that the equipment is subject to specific conditions of use specified in the schedule to this certificate.9.This certificate relates to the design, examination and testing of the products specified herein. The FM Approvals surveillance audit program has further determined that the manufacturing processes and quality control procedures in place are satisfactory to manufacture the product as examined, tested and Approved.10. Equipment Ratings:Nonincendive for use in Class I, Division 2, Groups A - D with intrinsically safe connections to Classes I, II, III, Division 1, Groups A - G Hazardous Locations; Nonsparking for use in Class I, Zone 2, Group IIC with intrinsically safe connections to Class I, Zone 0, Groups IIC/IIB/IIA Hazardous Locations.Certificate issued by:20 December 2016J. E. MarquedantManager, Electrical SystemsDate11. The marking of the equipment shall include:9106Bab HART Transparent RepeaterClass I Division 2, Groups A, B, C, D; T4,Provides IS outputs to Class I, II, III, Division 1/2, Groups A, B, C, D, E, F, GClass I, Zone 2, Ex nA nC [ia] IIC T4Ta = -20°C to +60°CInstallation Drawing: 9106QF019107Ba HART Transparent DriverClass I Division 2, Groups A, B, C, D; T4,Provides IS outputs to Class I, II, III, Division 1/2, Groups A, B, C, D, E, F, GClass I, Zone 2, Ex nA nC [ia] IIC T4Ta = -20°C to +60°CInstallation Drawing: 9107QF0112. Description of Equipment:General - The 9106B Repeaters and 9107B Drivers are new modules for the 9000 series and are available in one channel or two channel versions. They are rail mounted 24 V powered isolating barriers that serve as a repeater and isolator respectively for 4...20 mA signals with HART communication. Both the 9106B and 9107B provide potential free contacts for status indication. The modules are supplied via terminals at the top of the module or via Power Rail Type 9400. The removable display module 4501 can be used for programming the repeater and the driver. The manufacturer’s specified ambient temperature range is -20 °C to +60 °C.Ratings - The 9106B Hart transparent repeaters and 9107B Hart transparent drivers are rated for use in a process temperature range of -20°C to +60°C.9106Bab. HART Transparent Repeatera: Barrier (1 = 27.5V barrier; 2 = 25.3V barrier)b: Channels (A = Single; B = Double)AIS/I, II, III/1/ABCDEFG – 9106QF01; EntityNI/I/2/ABCD/T4; -20°C ≤ Ta ≤ 60°CI/2/Ex nA nC [ia] IIC T4; -20°C ≤ Ta ≤ 60°C - 9106QF01Entity Parameters:Loop Current Source: Channel 1 (Terminals 43, 44), Channel 2 (Terminals 53, 54)Loop Current Source 1 to 2: Channel 1 (Terminal 44), Channel 2 (Terminal 52)9106B1b: Uo (Voc) = 27.5V, Io (Isc) = 92.6mA, Po = 0.64WA, B or IIC C, E, F or IIB D, G or IIACo 0.084µF 0.670µF 2.24µFLo 4.14mH 16.58mH 33.17mHLo/Ro - 223µH/Ω447µH/Ω9106B2b: Uo (Voc) = 25.3V, Io (Isc) = 96mA, Po = 0.61WA, B or IIC C, E, F or IIB D, G or IIACo 0.104µF 0.818µF 2.85µFLo 3.85mH 15.43mH 30.86mHLo/Ro - 234µH/Ω468µH/ΩExternal Current Source: Channel 1 (Terminals 41, 42), Channel 2 (Terminals 51, 52)Ui (Vmax) = 30V, Ii (Imax) = 120mA, Pi = 0.85W, Ci = 2nF, Li = 0External Current Source: Channel 1 (Terminal 42), Channel 2 (Terminal 51)Ui (Vmax) = 30V, Ii (Imax) = 120mA, Pi = 0.85W, Ci = 4nF, Li = 09107Ba. HART Transparent Drivera: Channels (A = Single; B = Double)AIS/I, II, III/1/ABCDEFG – 9107QF01; EntityNI/I/2/ABCD/T4; -20°C ≤ Ta ≤ 60°CI/2/Ex nA nC [ia] IIC T4; -20°C ≤ Ta ≤ 60°C - 9107QF01Entity Parameters:Loop Current Source: Channel 1 (Terminals 41, 42), Channel 2 (Terminals 51, 52)Uo (Voc) = 28V, Io (Isc) = 93mA, Po = 0.65WA, B or IIC C, E, F or IIB D, G or IIACo 0.08µF 0.650µF 2.15µFLo 4mH 16mH 32mH13. Specific Conditions of Use:9106Bab. HART Transparent Repeater1. In Class I, Division 2 installations, the subject equipment shall be mounted within a tool-secured enclosurewhich is capable of accepting one or more of the Class I, Division 2 wiring methods specified in the Canadian Electrical Code (C22.1).2. In Class I, Zone 2 installations, the subject equipment shall be mounted within a tool-secured enclosure whichis capable of accepting one or more of the Class I, Zone 2 wiring methods specified in the Canadian Electrical Code (C22.1). The equipment shall be installed in an enclosure with a minimum ingress protection rating of IP54 unless the apparatus is intended to be afforded an equivalent degree of protection by location.3. Install in environments rated Pollution Degree 2 or better; overvoltage category I or II.4. Removable Display Module 4501, when connected, may not be damaged and shall be free of dust andmoisture.5. It is the responsibility of the manufacturer to provide warning markings in French where required by localjurisdictions.9107Ba HART Transparent Driver2. In Class I, Zone 2 installations, the subject equipment shall be mounted within a tool-secured enclosure whichis capable of accepting one or more of the Class I, Zone 2 wiring methods specified in the Canadian Electrical Code (C22.1). The equipment shall be installed in an enclosure with a minimum ingress protection rating of IP54 unless the apparatus is intended to be afforded an equivalent degree of protection by location.3. Install in environments rated Pollution Degree 2 or better; overvoltage category I or II.4. Removable Display Module 4501, when connected, may not be damaged and shall be free of dust andmoisture.5. It is the responsibility of the manufacturer to provide warning markings in French where required by localjurisdictions.14. Test and Assessment Procedure and Conditions:This Certificate has been issued in accordance with FM Approvals Canadian Certification Scheme.15. Schedule DrawingsA copy of the technical documentation has been kept by FM Approvals.16. Certificate HistoryDetails of the supplements to this certificate are described below:Date Description13th December 2011 Original Issue.20th December 2016 Supplement 1:Report Reference: – RR207607 dated 20th December 2016Description of the Change: Update to Installation Drawing for increased Lo values. Updated Certificate to Latest format.。
霍夫曼电气Eaton Moeller PKZM0电动机保护放电器说明书
Eaton 046989Eaton Moeller® series PKZM0 Motor-protective circuit-breaker,12.5 kW, 20 - 25 A, Screw terminalsGeneral specificationsEaton Moeller® series PKZM0 Motor-protective circuit-breaker046989401508046989676 mm93 mm45 mm0.294 kgCSA Class No.: 3211-05CSA-C22.2 No. 60947-4-1-14 UL File No.: E36332VDE 0660CECSAIEC/EN 60947IEC/EN 60947-4-1UL 60947-4-1ULUL Category Control No.: NLRV CSA File No.: 165628CSAUL PKZM0-25Product Name Catalog NumberEANProduct Length/Depth Product Height Product Width Product Weight Certifications Model CodeTurn buttonPhase-failure sensitivity (according to IEC/EN 60947-4-1, VDE 0660 Part 102)Motor protectionPhase failure sensitiveThree-pole ATEX dust-ex-protection, PTB 10, ATEX 3013, Ex II(2) GD100,000 operations100,000 OperationsCan be snapped on to IEC/EN 60715 top-hat rail with 7.5 or15 mm height.40 Operations/hIII3Motor protective circuit breakerFinger and back-of-hand proof, Protection against direct contact when actuated from front (EN 50274)6000 V AC25 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 msBranch circuit: Manual type E if used with terminal, or suitable for group installations, (UL/CSA)Also motors with efficiency class IE3-25 - 55 °C, Operating range≤ 0.25 %/K, residual error for T > 40°-5 - 40 °C to IEC/EN 60947, VDE 0660Actuator type Features Functions Number of poles Explosion safety category for dust Lifespan, electricalLifespan, mechanicalMounting positionOperating frequencyOvervoltage categoryPollution degreeProduct categoryProtectionRated impulse withstand voltage (Uimp) Shock resistanceSuitable forTemperature compensationAltitude Terminal capacity (flexible with ferrule)Max. 2000 m-25 °C55 °C25 °C40 °C40 °C80 °CDamp heat, cyclic, to IEC 60068-2-30 Damp heat, constant, to IEC 60068-2-781 x (1 - 6) mm², ferrule to DIN 462282 x (1 - 6) mm², ferrule to DIN 462281 x (1 - 6) mm²2 x (1 - 6) mm²18 - 1010 mm1.7 Nm, Screw terminals, Main cable1 Nm, Screw terminals, Control circuit cables50 Hz60 Hz5.5 kW12.5 kW690 V690 V25 A40 kA DC, up to 250 V DC, Main conducting paths18 kA, 240 V, SCCR (UL/CSA) with contactor DILM2518 kA, 480 Y/277 V, SCCR (UL/CSA) with contactor DILM25 388 A, Irm, Setting range max. 2 HP 7.5 HP 15 HPAmbient operating temperature - minAmbient operating temperature - maxAmbient operating temperature (enclosed) - min Ambient operating temperature (enclosed) - max Ambient storage temperature - minAmbient storage temperature - maxClimatic proofing Terminal capacity (solid)Terminal capacity (solid/stranded AWG)Stripping length (main cable)Tightening torqueRated frequency - minRated frequency - maxRated operational power at AC-3, 220/230 V, 50 Hz Rated operational power at AC-3, 380/400 V, 50 Hz Rated operational voltage (Ue) - minRated operational voltage (Ue) - maxRated uninterrupted current (Iu)Short-circuit currentShort-circuit current rating (type E) Short-circuit release Assigned motor power at 115/120 V, 60 Hz, 1-phase Assigned motor power at 230/240 V, 60 Hz, 3-phase Assigned motor power at 460/480 V, 60 Hz, 3-phaseBasic device fixed 15.5 x Iu, Trip Blocks± 20% tolerance, Trip blocks20 HPScrew terminals20 A25 AOverload trigger: tripping class 10 A7.04 W0 W2.35 W25 A0 WMeets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Save time and space thanks to the new link module PKZM0-XDM32ME Motor Starters in System xStart - brochureSwitching and protecting motors - catalogProduct Range Catalog Switching and protecting motorseaton-manual-motor-starters-characteristic-characteristic-curve-008.eps eaton-manual-motor-starters-pkz-characteristic-curve.epseaton-manual-motor-starters-characteristic-characteristic-curve-009.epsDA-DC-00004921.pdfDA-DC-00004892.pdfeaton-manual-motor-starters-pkz-dimensions-002.epseaton-manual-motor-starters-pkz-dimensions.epseaton-manual-motor-starters-pkzm0-dimensions-003.epseaton-manual-motor-starters-pkzm0-3d-drawing-008.epseaton-manual-motor-starters-mounting-3d-drawing-002.epseaton-general-ie-ready-dilm-contactor-standards.epseaton-manual-motor-starters-pkzm0-3d-drawing-004.epsDA-CE-ETN.PKZM0-25Assigned motor power at 575/600 V, 60 Hz, 3-phaseConnection Overload release current setting - minOverload release current setting - maxTripping characteristicEquipment heat dissipation, current-dependent PvidHeat dissipation capacity PdissHeat dissipation per pole, current-dependent PvidRated operational current for specified heat dissipation (In) Static heat dissipation, non-current-dependent Pvs10.2.2 Corrosion resistance10.2.3.1 Verification of thermal stability of enclosures10.2.3.2 Verification of resistance of insulating materials to normal heat10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects10.2.4 Resistance to ultra-violet (UV) radiation10.2.5 Lifting BrochuresCatalogues Characteristic curve Declarations of conformity DrawingseCAD modelInstallation instructionsDoes not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Is the panel builder's responsibility. The specifications for the switchgear must be observed.The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.IL03407011ZIL03402034ZWIN-WIN with push-in technologyeaton-motor-protective-circuit-breaker-pkzm0-overload-monitoring-exe-manual-mn03402003z-de-de-en-us.pdfIL122023ZUDA-CS-pkzm0DA-CD-pkzm0eaton-manual-motor-starters-transformer-pkzm0-wiring-diagram.eps eaton-manual-motor-starters-starter-nzm-mccb-wiring-diagram.eps10.2.6 Mechanical impact10.2.7 Inscriptions10.3 Degree of protection of assemblies10.4 Clearances and creepage distances10.5 Protection against electric shock10.6 Incorporation of switching devices and components 10.7 Internal electrical circuits and connections10.8 Connections for external conductors10.9.2 Power-frequency electric strength10.9.3 Impulse withstand voltage10.9.4 Testing of enclosures made of insulating material 10.10 Temperature rise10.11 Short-circuit rating10.12 Electromagnetic compatibility10.13 Mechanical function Installation videos Manuals and user guidesmCAD modelWiring diagramsEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All rights reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia。
阿尔法电线（Alpha Wire）ECOWIRE TM 20 AWG E163869-DB RU A
Customer Specification PART NO. 6714ConstructionApplicable Specifications Environmental Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: Diameters (In)1) Component 1 1 X 1 HOOKUPa) Conductor 20 (10/30) AWG TC 0.036b) Insulation 0.0095" Wall, Nom. ModifiedPolyphenylene Ether0.055+/- 0.002(1) Print ALPHA WIRE ECOWIRE TM 20 AWG E163869-DB RU AWM 11028 105C 600V VW-1 --- CRU AWM I A/B 105C 600V FT1 CE ROHS(2) Color(s) WHITE, BLACK, RED, GREEN, YELLOW, BLUE, BROWN ORANGE, SLATE, VIOLET, GREEN/YELLOW, DARK BLUE1) UL AWM/STYLE 11028 105°C / 600 V RMSVW-12) CSA International C(RU) AWM I A/B FT1 105°C / 600 V RMS3) Other Halogen-FreeIEC 60332-2 Flame Behavior4) CE:EU Low Voltage Directive 2006/95/EC1) EU Directive 2011/65/EU(RoHS2):All materials used in the manufacture of this part are in compliance withEuropean Directive 2011/65/EU regarding the restriction of use of certainhazardous substances in electrical and electronic equipment. Consult AlphaWire's web site for RoHS C of C.PropertiesOther2) REACH Regulation (EC 1907/2006):This product does not contain Substances of Very High Concern (SVHC)listed on the European Union's REACH candidate list in excess of 0.1%mass of the item. For up-to-date information, please see Alpha's REACH SVHC Declaration.Physical & Mechanical Properties 1) Temperature Range -40 to 105°C 2) Bend Radius 10X Cable Diameter 3) Pull Tension 7.9 Lbs, MaximumElectrical Properties (For Engineering purposes only) 1) Voltage Rating 600 V RMS 2) Inductance 0.04 µH/ft, Nominal3) Conductor DCR 10.6 Ω/1000ft @20°C, NominalPackaging Flange x Traverse x Barrel (inches)a) 25000 DR 23 x 20 x 0 Max. 2 separate pieces; Min length/piece 5000 FT.b) 5000 FT 12 x 4.5 x 3.5 Continuous length c) 1000 FT 9 x 4.5 x 3.5 Continuous length d) 100 FT3.75 x 2 x 1.75 Continuous length[Spool dimensions may vary slightly]Notes:a) Certain colors and put-up combinations may only be available by special order, minimums may apply.Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207Tel: 1-800-52 ALPHA (25742)Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure there accuracy at the time of publication,information and specifications described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not ensure product availability.Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever, even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.ALPHA WIRE - CONFIDENTIAL AND PROPRIETARYNotice to persons receiving this document and/or technical information. This document is confidential and is the exclusive property of ALPHA WIRE, and is merely on loan and subject to recall by ALPHA WIRE at any time. By taking possession of this document, the recipient acknowledges and agrees that this document cannot be used in any manner adverse to the interests of ALPHA WIRE, and that no portion of this document may be copied or otherwise reproduced without the prior written consent of ALPHA WIRE. In the case of conflicting contractual provisions, this notice shall govern the status of this document. <br /><br />©2019 ALPHA WIRE - all rights reserved.EU/China ROHS CERTIFICATE OF COMPLIANCETo Whom It May Concern:Alpha Wire Part Number: 67146714, RoHS-Compliant Commencing With 7/1/2009 ProductionNote: all colors and put-upsThis document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the European Parliament, better known as the RoHS Directive (commonly known as RoHS 2), with regards to restrictions of the use of certain hazardous substances used in the manufacture of electrical and electronic equipment. This certification extends to amending Directive 2015/863/EU which expanded the list of restricted substances to 10 items (commonly known as RoHS 3) The reader is referred to these Directives for the specific definitions and extents of the Directives. No Exemptions are required for RoHS Compliance on this item. Additionally, Alpha certifies that the listed part number is in compliance with China RoHS “Marking for Control of Pollution by Electronic Information Products” standard SJ/T 11364-2014.Substance Maximum Control ValueLead0.1% by weight (1000 ppm)Mercury0.1% by weight (1000 ppm)Cadmium0.01% by weight (100 ppm)Hexavalent Chromium0.1% by weight (1000 ppm )Polybrominated Biphenyls (PBB)0.1% by weight (1000 ppm)Polybrominated Diphenyl Ethers (PBDE) ,Including Deca-BDE0.1% by weight (1000 ppm)Bis(2-ethylhexyl) phthalate (DEHP)0.1% by weight (1000 ppm)Butyl benzyl phthalate (BBP)0.1% by weight (1000 ppm)Dibutyl phthalate (DBP) 0.1% by weight (1000 ppm)Diisobutyl phthalate (DIBP)0.1% by weight (1000 ppm)The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief at the date of its release. The information provided is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it will become part of. The intent of this document is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.Authorized Signatory for the Alpha Wire:Dave Watson, Director of Engineering & QA4/11/2022Alpha Wire711 Lidgerwood Ave.Elizabeth, NJ 07207Tel: 1-908-925-8000。
艾顿摩尔系列PKZM0电缆接线模块说明书
Eaton 112119Eaton Moeller® series PKZM0 Wiring module, for DILM7-M15General specificationsEaton Moeller® series PKZM0 Accessory Wiring module1121194015081116799PKZM0-XM12DE 67 mm 54 mm 45 mm 0.032 kgCSA ULUL Category Control No.: NLRV CSA-C22.2 No. 14 CSA Class No.: 3211-05 CSA File No.: 165628 CEIEC/EN 60947-4-1 UL 508UL File No.: E36332Product NameCatalog Number EANModel Code Product Length/Depth Product Height Product Width Product Weight CertificationsDirect circuit Accessories-25 °C55 °C415 VAC1.5 W0 W0.5 W15.5 A0 WMeets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Model Product category Ambient operating temperature - min Ambient operating temperature - max Rated operational voltage (Ue) - max Equipment heat dissipation, current-dependent Pvid Heat dissipation capacity Pdiss Heat dissipation per pole, current-dependent Pvid Rated operational current for specified heat dissipation (In)Static heat dissipation, non-current-dependent Pvs 10.2.2 Corrosion resistance10.2.3.1 Verification of thermal stability of enclosures 10.2.3.2 Verification of resistance of insulating materials to normal heat10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects10.2.4 Resistance to ultra-violet (UV) radiation 10.2.5 Lifting10.2.6 Mechanical impact10.2.7 InscriptionsDoes not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Is the panel builder's responsibility. The specifications for the switchgear must be observed.The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.Motor Starters in System xStart - brochureSave time and space thanks to the new link module PKZM0-XDM32MESwitching and protecting motors - catalogProduct Range Catalog Switching and protecting motorsDA-DC-00004892.pdfDA-DC-00004921.pdfDA-DC-00004890.pdfDA-DC-00004886.pdfDA-DC-00004915.pdfeaton-manual-motor-starters-module-pkzm0-wiring-module-3d-drawing.epsDA-CE-ETN.PKZM0-XM12DEWIN-WIN with push-in technologyeaton-cadenas-path-01-geo-0_xm12de.3dbDA-CD-0_xm12deDA-CS-0_xm12de10.3 Degree of protection of assemblies10.4 Clearances and creepage distances10.5 Protection against electric shock10.6 Incorporation of switching devices and components 10.7 Internal electrical circuits and connections10.8 Connections for external conductors10.9.2 Power-frequency electric strength10.9.3 Impulse withstand voltage10.9.4 Testing of enclosures made of insulating material 10.10 Temperature rise10.11 Short-circuit rating10.12 Electromagnetic compatibility10.13 Mechanical function BrochuresCatalogsDeclarations of conformityDrawingseCAD modelInstallation videosmCAD modelEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia。
Genaxy GenTip 试剂盒说明书
CAT#category DESCRIPTION QTY/PK GEN-UT-10-C Genaxy GenTip 10µl Natural for P2/P101000 tips1000 tips GEN-UT-10XL-C Genaxy GenTip Extra long clear tips for Eppendorfresearch/reference, BulkGEN-UT-200-C Genaxy GenTip 200µl Bevelled Natural1000 tips GEN-UT-200-Y Genaxy GenTip 200µl Bevelled Yellow1000 tips GEN-UT-200-C-NB Genaxy GenTip 200µl Non-Bevelled Natural1000 tips GEN-UT-200-Y-NB Genaxy GenTip 200µl Non-Bevelled1000 tips GEN-UTG-200-Y Genaxy GenTip 200µl Yellow, Graduated1000 tips GEN-UTG-200-C Genaxy GenTip 200µl Clear, Graduated1000 tips GEN-TE-200-Y Genaxy GenTip 200µl Eppendorf Style Tips, Yellow10X1000 tips GEN-UT-300-C Genaxy GenTip 300µl Natural1000 tips GEN-UT-1000-C Genaxy GenTip 1000µl Natural500 tipsGEN-UT-1000-B Genaxy GenTip 1000µl Blue500 tipsGEN-UTG-1000-C Genaxy GenTip 1000µl Clear, Graduated500 tipsGEN-TE-1000-B Genaxy GenTip 1000µl Eppendorf Style Tips, Blue10 x 500 tips GEN-UT-1200-C Genaxy GenTip 1200µl Clear, Graduated1000 tips GEN-UT-1200XL-C Genaxy GenTip 1200µl Clear, Extra-Long Graduated1000 tips GEN-UT-5000-C Genaxy GenTip 5000µl Clear250 tipsGEN-UT-10ML-C Genaxy GenTip 10000µl Clear200 tipsGEN-Y-200-IW Genaxy200µl, Yellow, Individual Peal Off, Plastic Wrap500 tipsGEN-C-200-IW Genaxy200µl, Clear, Individual Peal Off, Plastic Wrap500 tipsGEN-C-200-IW-PP Genaxy200µl, Clear, Individual Peal Off, Paper Plastic Wrap400 x 5 tips GEN-C-300-IW Genaxy10µl, Clear, Individual Peal Off, Plastic Wrap500 tipsGEN-B-1000-IW Genaxy1000µl, Blue, Individual Peal Off, Plastic Wrap500 tipsGEN-C-1000-IW Genaxy1000µl, Clear, Individual Peal Off, Plastic Wrap500 tips200 x 5 tips GEN-C-1000-IW-PP Genaxy1000µl, Clear, Individual Peal Off, Paper PlasticWrapGEN-UT-10-ER Genaxy Empty Racks for GenTip 10ul10GEN-UT-200-ER Genaxy Empty Racks for GenTip 200ul10GEN-UT-1000-ER Genaxy Empty Racks for GenTip 1000ul10GEN-UT-0510-ER Genaxy Empty Racks for 5ml & 10ml Tips EachGEN-UT-10-C-R Genaxy GenTip 10µl Natural MiniRacks of 960/pk10 RacksGEN-UT-10XL-C-R Genaxy GenTip 10µl Extended Natural MiniRacks of 960/pk10 RacksGEN-UT-200-Y-R Genaxy GenTip 200µl Yellow MiniRacks of 960/pk10 RacksGEN-UT-200-C-R Genaxy GenTip 200µl Natural MiniRacks of 960/pk10 RacksGEN-UT-300-C-R Genaxy GenTip 300µl Natural MiniRacks of 960/pk10 RacksGEN-UT-1000-B-R Genaxy GenTip 1000µl Blue MiniRacks of 1000/pk10 RacksGEN-UT-1000-C-R Genaxy GenTip 1000µl Natural MiniRacks of 1000/pk10 RacksGEN-UT-10-C-R-S Genaxy GenTip 10µl STERILE Natural MiniRacks of 960/pk10 Racks10 RacksGEN-UT-10XL-C-R-S Genaxy GenTip 10µl Extended STERILE Natural MiniRacks of960/pkGEN-UT-200-Y-R-S Genaxy GenTip 200µl STRL Ye MiniRacks of 960/pk10 RacksGEN-UT-200-C-R-S Genaxy GenTip 200µl STRL Natural MiniRacks of 960/pk10 RacksGEN-UT-300-C-R-S Genaxy GenTip 300µl STRL Natural MiniRacks of 960/pk10 RacksGEN-UT-1000-B-R-S Genaxy GenTip 1000µl STERILE Blue MiniRacks of 1000/pk10 RacksGEN-UT-1000-C-R-S Genaxy GenTip 1000µl STERILE Natural MiniRacks of10 Racks1000/pkGEN-UT-1200-C-R Genaxy GenTip 1200µl Natural MiniRacks50 Racks GEN-UT-1200XL-C-R Genaxy GenTip 1200µl Extra-Long, Natural MiniRacks50 Racks GEN-UT-10-C-STK Genaxy GenTip 10µl Natural MiniStacks of 960/pk Each GEN-UT-200-C-STK Genaxy GenTip 200µl Natural MiniStacks of 960/pk Each GEN-UT-200-Y-STK Genaxy GenTip 200µl Yellow MiniStacks of 960/pk Each GEN-UT-1000-C-STK Genaxy GenTip 1000µl Natural MiniStacks of 600/pk Each GEN-UT-1000-B-STK Genaxy GenTip 1000µl Blue MiniStacks of 600/pk EachEach GEN-UT-10-LC-STKS Genaxy GenTip 10µl Natural Low retention MiniStacks of960/pk SterileEach GEN-UT-200-LC-STKS Genaxy GenTip 200µl Natural Low retention MiniStacks of960/pk SterileGEN-UT-1000-LC-STKS Genaxy GenTip 1000µl Natural Low retention MiniStacks ofEach600/pk SterileGEN-UT-10-L-C Genaxy GenTip 10µl Natural Low Retention1000 tips1000 tips GEN-UT-10XL-L-C Genaxy GenTip Extra long clear tips for P2/P10 forEppendorf research/reference Low RetentionGEN-UT-200-L-C Genaxy GenTip 200µl Bevelled Natural Low Retention1000 tips GEN-UT-300-L-C Genaxy GenTip 300µl Natural Low Retention1000 tips GEN-UT-1000-L-C Genaxy GenTip 1000µl Natural Low Retention500 tips GEN-UT-10-C-L-R Genaxy GenTip 10µl Natural MiniRacks of 960/pk10 Racks GEN-UT-10XL-C-L-R Genaxy GenTip 10µl Extended Natural MiniRacks of 960/pk10 RacksGEN-UT-200-C-L-R Genaxy GenTip 200µl Natural MiniRacks of 960/pk10 Racks GEN-UT-1000-C-L-R Genaxy GenTip 1000µl Natural MiniRacks of 1000/pk10 Racks GEN-UT-10-C-L-R-S Genaxy GenTip 10µl STERILE Natural MiniRacks of 960/pk10 Racks10 Racks GEN-UT-10XL-C-L-R-S Genaxy GenTip 10µl Extended STERILE Natural MiniRacks of960/pkGEN-UT-200-C-L-R-S Genaxy GenTip 200µl STRL Natural MiniRacks of 960/pk10 Racks10 Racks GEN-UT-1000-C-L-R-S Genaxy GenTip 1000µl STERILE Natural MiniRacks of1000/pkGEN-FB-10Genaxy10µl Universal Graduation Filter Tip1000 tips GEN-FB-10XL Genaxy10µl Extended Universal Graduation Filter Tip1000 tips GEN-FB-20Genaxy20µl Universal Graduation Filter Tip1000 tips GEN-FB-50Genaxy50µl Universal Graduation Filter Tip1000 tips GEN-FB-100Genaxy100µl Universal Graduation Filter Tip1000 tips GEN-FB-200Genaxy200µl Universal Graduation Filter Tip1000 tips GEN-FB-1000Genaxy1000µl Universal Filter Tip500x2 tips GEN-FB-10-S Genaxy10µl Universal Graduation Filter Tip, Sterile1000 tips GEN-FB-10XL-S Genaxy10µl Extended Universal Graduation Filter Tip,1000 tipsSterileGEN-FB-20-S Genaxy20µl Universal Graduation Filter Tip, Sterile1000 tips GEN-FB-50-S Genaxy50µl Universal Graduation Filter Tip, Sterile1000 tips GEN-FB-100-S Genaxy100µl Universal Graduation Filter Tip, Sterile1000 tips GEN-FB-200-S Genaxy200µl Universal Graduation Filter Tip, Sterile1000 tips GEN-FB-1000-S Genaxy1000µl Universal Filter Tip, Sterile500x2 tips GEN-FB-10-R-S Genaxy10µl Universal Graduation Racked Filter Tip, Sterile10 Racks10 Racks GEN-FB-10XL-R-S Genaxy10µl Exteded Universal Graduation Racked FilterTip, SterileGEN-FB-20-R-S Genaxy20µl Universal Graduation Racked Filter Tip, Sterile10 RacksGEN-FB-100-R-S Genaxy100µl Universal Graduation Racked Filter Tip,10 RacksSterile10 Racks GEN-FB-200-R-S Genaxy200µl Universal Graduation Racked Filter Tip,SterileGEN-FB-1000-R-S Genaxy1000µl Universal Racked Filter Tip, Sterile 6 Racks GEN-FB-10-L Genaxy10µl Universal Graduation Low-Retention Filter Tip1000 tips GEN-FB-10XL-L Genaxy10µl Extended Universal Graduation Low-Retention1000 tipsFilter TipGEN-FB-20-L Genaxy20µl Universal Graduation Low-Retention Filter Tip1000 tips GEN-FB-50-L Genaxy50µl Universal Graduation Low-Retention Filter Tip1000 tips1000 tips GEN-FB-100-L Genaxy100µl Universal Graduation Low-Retention FilterTip1000 tips GEN-FB-200-L Genaxy200µl Universal Graduation Low-Retention FilterTipGEN-FB-1000-L Genaxy1000µl Universal Tip, Low-Retention, Filter Tip500x2 tips1000 tips GEN-FB-10-L-S Genaxy10µl Universal Graduation Low-Retention Filter Tip,Sterile1000 tips GEN-FB-10XL-L-S Genaxy10µl Extended Universal Graduation Low-RetentionFilter Tip, Sterile1000 tips GEN-FB-20-L-S Genaxy20µl Universal Graduation Low-Retention Filter Tip,Sterile1000 tips GEN-FB-50-L-S Genaxy50µl Universal Graduation Low-Retention Filter Tip,Sterile1000 tips GEN-FB-100-L-S Genaxy100µl Universal Graduation Low-Retention FilterTip, Sterile1000 tips GEN-FB-200-L-S Genaxy200µl Universal Graduation Low-Retention FilterTip, Sterile500x2 tips GEN-FB-1000-L-S Genaxy1000µl Universal Tip, Low-Retention, Filter Tip,Sterile10 Racks GEN-FB-10-L-R-S Genaxy10µl Universal Graduation Low-Retention RackedFilter Tip, Sterile10 Racks GEN-FB-10XL-L-R-S Genaxy10µl Extended Universal Graduation Low-RetentionRacked Filter Tip, Sterile10 Racks GEN-FB-20-L-R-S Genaxy20µl Universal Graduation Low-Retention RackedFilter Tip, Sterile10 Racks GEN-FB-50-L-R-S Genaxy50µl Universal Graduation Low-Retention RackedFilter Tip, SterileGEN-FB-100-L-R-S Genaxy100µl Universal Graduation Low-Retention Racked10 RacksFilter Tip, Sterile10 Racks GEN-FB-200-L-R-S Genaxy200µl Universal Graduation Low-Retention RackedFilter Tip, Sterile6 Racks GEN-FB-1000-L-R-S Genaxy1000µl Universal Low-Retention Racked Filter Tip,SterileGEN-FB-10-STK-S Genaxy10µl Universal Graduation, Filter Tip, Sterile960 tips GEN-FB-200-STK-S Genaxy200µl Universal Graduation, Filter Tip, Sterile960 tips GEN-FB-1000-STK-S Genaxy1000µl Universal Graduation, Filter Tip, Sterile500 tips GEN-DFB-10Genaxy10µl Universal Graduated Dual Filter Tip1000 tips GEN-DFB-10XL Genaxy10µl Extended Graduated Dual Filter Tip1000 tips GEN-DFB-200Genaxy200µl Universal Graduated Dual Filter Tip1000 tips GEN-DFB-1000Genaxy 1 OOOµl Universal Graduated Dual Filter Tip500x2 tipsGEN-DFB-10XL-S Genaxy10µl Extended Graduated Dual Filter Tip, Sterile1000 tips GEN-DFB-200-S Genaxy200µl Universal Graduated Dual Filter Tip, Sterile1000 tips500x2 tips GEN-DFB-1000-S Genaxy 1 OOOµl Universal Graduated Dual Filter Tip,Sterile10GEN-DFB-10-R-S Genaxy10µl Universal Graduated Racked Dual Filter Tip,Sterile10GEN-DFB-10XL-R-S Genaxy10µl Extended Graduated Racked Dual Filter Tip,Sterile10GEN-DFB-200-R-S Genaxy200µl Universal Graduated Racked Dual Filter Tip,Sterile6GEN-DFB-1000-R-S Genaxy 1 OOOµl Universal Graduated Racked Dual FilterTip, Sterile200 x 4 GEN-TGL-520R Genaxy MicroFlex Tip 0.57mm Rnd Natural for 0.75, 1.0 &1.5mm PAGE gelsGEN-TGL-520RS Genaxy MicroFlex Tip 0.57mm Rnd STRL Natural for 0.75,200 x 41.0 & 1.5mm PAGE gels200 x 4 GEN-TGL-320R Genaxy MicroFlex Tip 0.37mm Flat Natural for loading0.4mm sequencing gels200 x 4 GEN-TGL-320RS Genaxy MicroFlex Tip 0.37mm Flat STRL Natural for loading0.4mm sequencing gelsGEN-TGL-120R Genaxy MicroFlex Tip 0.17mm Flat Natural for loading200 x 40.2mm wedge-spacer gels200 x 4 GEN-TGL-120-RS Genaxy MicroFlex Tip 0.17mm Flat STRL Natural for loading0.2mm wedge-spacer gels4800 GEN-MT-65-C Genaxy MicroTube PP 0.65ml Single Tubes Natural, in BulkPackGEN-MT-6508-C Genaxy MicroTube PP 0.65ml 8-Strip Tubes, in Bulk Pack600 Strips4800 GEN-MT-01-C Genaxy MicroTube PP 1.1ml Single Tubes Natural, in BulkPackGEN-MT-0108-C Genaxy MicroTube PP 1.1ml 8-Strip Tubes, in Bulk Pack600 Strips GEN-MT-0112-C Genaxy MicroTube PP 1.1ml 12-Strip Tubes, in Bulk Pack400 Strips GEN-MT-25-C Genaxy MicroTube PP 2.5ml Single Tubes, in Bulk Pack48004800 GEN-MT-65-C-R Genaxy MicroTube PP 0.65ml Single Tubes Natural, in 96tube-slot Racks4800 GEN-MT-65-C-R-S Genaxy MicroTube PP 0.65ml Single Tubes Natural, in 96tube-slot Racks, Sterile4800 GEN-MT-01-C-R Genaxy MicroTube PP 1.1ml Single Tubes Natural, in 96tube-slot Racks4800 GEN-MT-01-C-R-S Genaxy MicroTube PP 1.1ml Single Tubes Natural, in 96tube-slot Racks, SterileGEN-MT-0108-C-R Genaxy MicroTube PP 1.1ml 8-Strip Tubes, in 96 tube-slot600 StripsRacks600 Strips GEN-MT-0108-C-R-S Genaxy MicroTube PP 1.1ml 8-Strip Tubes, in 96 tube-slotRacks, SterileGEN-MT-0112-C-R Genaxy MicroTube PP 1.1ml 12-Strip Tubes, in 96 tube-slot400 StripsRacks400 Strips GEN-MT-0112-C-R-S Genaxy MicroTube PP 1.1ml 12-Strip Tubes, in 96 tube-slotRacks, SterileGEN-MTC-8-VC Genaxy MicroTube Cap PE 8-Strips VENTED Natural600 Strips GEN-MTC-8-VC-S Genaxy MicroTube Cap PE 8-Strips VENTED, Sterile600 StripsGEN-MTC-8-NVC Genaxy MicroTube Cap PE 8-Strips NO VENTS Natural600 StripsGEN-MTC-8-NVC-S Genaxy MicroTube Cap PE 8-Strips NO VENTS, Sterile600 StripsGEN-MTC-12-VC Genaxy MicroTube Cap PE 12-Strips VENTED Natural400 StripsGEN-MTC-12-VC-S Genaxy MicroTube Cap PE 12-Strips VENTED, Sterile400 StripsGEN-MTM-96-C Genaxy MicroTube Mat PE 96-Plug Mats Natural 96-50PlugMats50GEN-MTM-96-C-S Genaxy MicroTube Mat PE 96-Plug Mats STERILE Natural 96-PlugMatsGEN-MTP-96F-S Genaxy Microtitration Plates, Flat Bottom, Sterile100 PlatesGEN-MTP-96U-S Genaxy Microtitration Plates, Round Bottom, Sterile100 PlatesGEN-MTP-L-S Genaxy Lids for Microtiter Plates, Sterile100 PlatesGEN-MTP-96F-L-S Genaxy Microtitration Plates with Lids, Flat Bottom, Sterile250 Plates250 PlatesGEN-MTP-96U-L-S Genaxy Microtitration Plates with Lids, Round Bottom,SterileGEN-MTP-HB-96F Genaxy96 Wells Undetachable Elisa Plate, High Binding100 Plates100 PlatesGEN-MTPS-HB-96F Genaxy96 Wells 8x12 Strips Detachable Elisa Plate, HighBindingGEN-0241Genaxy Vision Plate™ 24 well, black, sterile, TC treated24 plates with lids GEN-0243Genaxy Vision Plate™ 24 well, black, sterile30 platesGEN-0244Genaxy Vision Plate™ 24 well, black, non-sterile, untreated30 plates24 plates with lids GEN-0245Genaxy Vision Plate™ 24 well, black, sterile, Collagen 1treatedGEN-0246Genaxy Vision Plate™ 24 well, black, sterile, Poly D-Lysin24 plates with lidstreated80 lidsGEN-0284Genaxy24 Well Microplate Lid, with condensation rings,non-sterileGEN-0286Genaxy24 Well Microplate Lid, with condensation rings,80 lidssterileGEN-0221Genaxy Vision Plate™ 96 well, black, sterile, TC treated24 plates with lids GEN-0223Genaxy Vision Plate™ 96 well, black, sterile30 platesGEN-0224Genaxy Vision Plate™ 96 well, black, non-sterile, untreated30 plates24 plates with lids GEN-0225Genaxy Vision Plate™ 96 well, black, sterile, Collagen 1treatedGEN-0226Genaxy Vision Plate™ 96 well, black, sterile, Poly D-Lysin24 plates with lidstreated80 lidsGEN-0282Genaxy96 Well Microplate Lid, low profile, withcondensation rings, non-sterile80 lidsGEN-0283Genaxy96 Well Microplate Lid, low profile, withcondensation rings, sterileGEN-0201Genaxy Vision Plate™ 384 well, black, sterile, TC treated24 plates with lidsGEN-0203Genaxy Vision Plate™ 384 well, black, sterile30 plates30 platesGEN-0204Genaxy Vision Plate™ 384 well, black, non-sterile,untreated24 plates with lids GEN-0205Genaxy Vision Plate™ 384 well, black, sterile, Collagen 1treatedGEN-0206Genaxy Vision Plate™ 384 well, black, sterile, Poly D-Lysin24 plates with lidstreatedGEN-0280Genaxy384 Well Microplate Lid, low profile, withoutcondensation rings, non-sterile 100 lidsGEN-0281Genaxy384 Well Microplate Lid, low profile, without100 lidscondensation rings, sterileGEN-0262Genaxy24 Well Assay Plate, solid bottom, black100 plates GEN-0284Genaxy24 Well Microplate Lid, with condensation rings,80 lidsnon-sterile80 lidsGEN-0286Genaxy24 Well Microplate Lid, with condensation rings,sterileGEN-0263Genaxy96 Well Assay Plate, solid bottom, black100 plates80 lidsGEN-0282Genaxy96 Well Microplate Lid, low profile, withcondensation rings, non-sterile80 lidsGEN-0283Genaxy96 Well Microplate Lid, low profile, withcondensation rings, sterileGEN-0264Genaxy384 Well Assay Plate, solid bottom, black100 plates100 lids GEN-0280Genaxy384 Well Microplate Lid, low profile, withoutcondensation rings, non-sterile100 lids GEN-0281Genaxy384 Well Microplate Lid, low profile, withoutcondensation rings, sterileGEN-0273Genaxy96 Well Assay Plate, solid bottom, white100 plates GEN-0282Genaxy96 Well Microplate Lid, low profile, with80 lidscondensation rings, non-sterile80 lidsGEN-0283Genaxy96 Well Microplate Lid, low profile, withcondensation rings, sterileGEN-0274Genaxy384 Well Assay Plate, solid bottom, white100 plates100 lids GEN-0280Genaxy384 Well Microplate Lid, low profile, withoutcondensation rings, non-sterile100 lids GEN-0281Genaxy384 Well Microplate Lid, low profile, withoutcondensation rings, sterileGEN-0254Genaxy384 Well Assay Plate, solid bottom, clear100 plates100 lids GEN-0280Genaxy384 Well Microplate Lid, low profile, withoutcondensation rings, non-sterile100 lids GEN-0281Genaxy384 Well Microplate Lid, low profile, withoutcondensation rings, sterile5 x 5 plates GEN-0131Genaxy12 Channel Reservoir Plate, 21 ml channels,pyramid bases, clear polypropylene5 x 5 plates GEN-0133Genaxy290 ml Reservoir Plate, open format, 12 channelpyramid base, clear polypropylene100 plates GEN-0147Genaxy384 Well Deep Well Storage Microplate, 190 µlsquare wells, V shaped bases, clear polypropyleneGEN-0139Genaxy Silicone Sealing Cap Mat, clear, with 384 square50 matscaps10 x 10 plates GEN-0126Genaxy96 Deep Well Storage Microplate, 1.2 ml squarewells, U shaped bases, clear polypropylene10 x 5 plates GEN-0132Genaxy96 Deep Well Storage Microplate, 2.2 ml squarewells, V shaped bases, clear polypropyleneGEN-0136Genaxy96 Deep Well Storage Microplate, 2.2 ml square5 x 10 plateswells, U shaped bases, clear polypropyleneGEN-0137Genaxy Silicone Sealing Cap Mat, clear, with 96 square caps50 mats GEN-LB0109Genaxy96 Well Storage Microplate, 200 µl round wells, V50 platesshaped bases, clear polypropylene, Low BindingGEN-0110Genaxy96 Well Storage Microplate, 300 µl round wells, U100 platesshaped bases, clear polypropylene10 x 10 plates GEN-0116Genaxy96 Well Storage Microplate, 350 µl round wells, Ushaped bases, clear polypropylene10 x 10 plates GEN-0117Genaxy96 Well Storage Microplate, 350 µl round wells, Vshaped bases, clear polypropylene50 mats GEN-0138Genaxy Silicone Sealing Cap Mat, clear, with 96 round caps(not for use with GEN-0110)GEN-0120Genaxy96 Deep Well Storage Microplate, 1.2 ml round50 plateswells, U shaped bases, clear polypropylene50 plates GEN-0130Genaxy96 Deep Well Storage Microplate, 2.0 ml roundwells, U shaped bases, clear polypropyleneGEN-0135Genaxy Silicone Sealing Cap Mat, white, with 96 round caps100 mats(for GEN-0120 only)50 mats GEN-0138Genaxy Silicone Sealing Cap Mat, clear, with 96 round caps(not for GEN-0120 and GEN-0110)GEN-0500Genaxy Sheets (135 mm x 80 mm)100GEN-0560Genaxy Sheets (140 mm x 77 mm)100GEN-0550Genaxy Sheets (130 mm x 80 mm)100GEN-0500FL Genaxy Sheets (137 mm x 80 mm)100GEN-0512Genaxy Sheets (122 mm x 80 mm)100GEN-0566Genaxy Sheets (135 mm x 77 mm)100GEN-0566/384Genaxy Sheets (117 mm x 80 mm)100GEN-0517Genaxy Sheets (135 mm x 80 mm)100GEN-0517/ST Genaxy Sheets (135 mm x 80 mm) Sterile10 x 10 GEN-0510Genaxy Sheets (130 mm x 80 mm)100GEN-02-C-PCR Genaxy PCR Tubes, Flat Cap non frosted, Clear 0.2 ml1000GEN-02-C-PCR-G Genaxy PCR Tubes, Flat Cap frosted, Clear 0.2 ml1000GEN-02-DC-PCR Genaxy PCR Tubes, Domed Cap, Clear 0.2 ml1000GEN-05-C-PCR Genaxy PCR Tubes, Flat Cap, Clear 0.5 ml1000GEN-PT1-1000Genaxy0.1ml 4-Tube & 4-Cap Strips, Roto-Gene®250 StripsCompatible120 Strips GEN-0108-T-PCR Genaxy8-Strip PCR Tubes w/o cap 0.1 ml, Low Profile,CLEAR120 Strips GEN-0108-WT-PCR Genaxy8-Strip PCR Tubes w/o cap 0.1 ml, Low Profile,WHITEGEN-0108-C-PCR Genaxy8-Strip PCR Cap for 0.1 ml Low Profile Tubes, CLEAR120 Strips120 Strips GEN-0108-WC-PCR Genaxy8-Strip PCR Cap for 0.1 ml Low Profile Tubes,WHITEGEN-0208-DCC-PCR Genaxy8-Strip PCR Tubes w/caps; Clear 0.2 ml125 Strips GEN-0208-FCC-PCR Genaxy8-Strip PCR Tubes and Flat Caps 0.2 ml125 Strips GEN-0208-T-PCR Genaxy8-Strip PCR Tubes w/o cap 0.2 ml125 Strips GEN-0208-CPC-PCR Genaxy8-Strip 0.2ml Domed PCR Caps125 Strips GEN-0208-FCP-PCR Genaxy8-Strip 0.2ml Flat PCR Caps125 Strips GEN-0208-RT-PCR Genaxy8-Stnp 0.2ml Optically Clear Flat Caps for -—y125 Strips GEN-0208-FCCA-PCR Genaxy0.2ml 8-Strip PCR Tubes w/attached Flat caps240 Strips GEN-96-010-PCR-NS-C Genaxy0.1ml Clear, 96 Well PCR Plate, No Skirt, LOW25PROFILE25GEN-96-020-PCR-NS-C Genaxy0.2ml Clear, 96 Well PCR Plate, No Skirt, HIGHPROFILE25GEN-96-010-PCR-NS-W Genaxy0.1ml White, 96 Well PCR Plate, No Skirt, LOWPROFILE25GEN-96-020-PCR-NS-W Genaxy0.2ml White, 96 Well PCR Plate, No Skirt, HIGHPROFILEGEN-96-010-PCR-FS-C Genaxy0.1ml Clear, 96 Well PCR Plate, FULL Skirt2550GEN-96-020-PCR-NSE-C Genaxy0.2ml Clear, 96 Well PCR Plate, No Skirt, elevatedwells10GEN-96-020-PCR-SS-C Genaxy0.2ml Clear, 96 Well PCR Plate, Semi Skirt, highprofileGEN-96-020-PCR-SS-B Genaxy0.2ml Black, 96 Well PCR Plate, Semi Skirt50GEN-96-020-PCR-SS-W Genaxy0.2ml White, 96 Well PCR Plate, Semi Skirt50GEN-96-020-NSE-ABC Genaxy0.2ml Clear, 96 Well PCR Plate, Elevated Skirt1050GEN-96-010-NSE-ABC Genaxy0.1ml 96-well PCR Plate, fit ABI, Low Profile,Natural50 plates GEN-96-010-HS-W-RC Genaxy0.1ml 96-well PCR Plate P P, Half Skirt, Fit RocheLight Cycler, White, No Sealing Film50 plates GEN-96-010-HS-W-SEAL-RC Genaxy0.1ml 96-well PCR Plate P P, Half Skirt, Fit RocheLight Cycler, White, With Sealing Film50 plates GEN-384-004-PCR-FS-C-RC Genaxy40µl 384-well PCR Plate P P, Full Skirt, Fit RocheLight Cycler, Natural50 plates GEN-384-004-PCR-FS-B-RC Genaxy40µl 384-well PCR Plate P P, Full Skirt, Fit RocheLight Cycler, BlackGEN-384-004-PCR-FS-B Genaxy40µl 384-well PCR Plate PP Full Skirt, Black50 plates GEN-384-004-PCR-FS-W Genaxy40µl 384-well PCR Plate PP Full Skirt, White50 plates GEN-MT-060-C Genaxy ClickSeal MCTube 0.65ml, Natural1000 Tubes GEN-MT-060-A Genaxy0.65ml Graduated MCT, Rainbow1000 Tubes1000 Tubes GEN-MT-060-Color*Genaxy0.65ml Graduated MCT, Red, Yellow, Green, Blue,VoiletGEN-MT-060-X Genaxy0.65ml Graduated MCT, Amber1000 Tubes GEN-MT-150-C Genaxy ClickSeal MCTube 1.5ml, Natural500 Tubes GEN-MT-150-A Genaxy 1.5ml Graduated MCT, Rainbow1000 Tubes GEN-MT-150-X Genaxy 1.5ml Graduated MCT, Amber1000 Tubes GEN-MT-175-C Genaxy ClickSeal MCTube 1.7ml, Natural500 Tubes GEN-MT-175-A Genaxy 1.7ml Graduated MCT, Rainbow1000 Tubes GEN-MT-175-Color Genaxy 1.7ml Graduated MCT, Red, Yellow, Green, Blue,1000 TubesVoiletGEN-MT-175-X Genaxy 1.7ml Graduated MCT, Amber1000 Tubes GEN-MT-200-C Genaxy ClickSeal MCTube 2.0ml, Natural500 Tubes GEN-MT-200-A Genaxy 2.0ml Graduated MCT, Rainbow1000 Tubes1000 Tubes GEN-MT-200-Color Genaxy 2.0ml Graduated MCT, Red, Yellow, Green, Blue,VoiletGEN-MT-200-X Genaxy 2.0ml Graduated MCT, Amber1000 Tubes GEN-MT-5ml-C Genaxy 5.0ml Graduated MCT, Clear1000 Tubes GEN-MT-060-C-S Genaxy ClickSeal MCTube 0.65ml, Natural, Sterile5000 Tubes GEN-MT-175-C-S Genaxy ClickSeal MCTube 1.7ml, Natural, Sterile5000 Tubes GEN-MT-200-C-S Genaxy ClickSeal MCTube 2.0ml, Natural, Sterile5000 Tubes GEN-MT-060-L-C Genaxy ClickSeal MCTube 0.65ml, Natural Low Retention1000 TubesGEN-MT-175-L-C Genaxy ClickSeal MCTube 1.7ml, Natural Low Retention500 Tubes GEN-MT-200-L-C Genaxy ClickSeal MCTube 2.0ml, Natural Low Retention500 Tubes GEN-SCV-05-SS Genaxy0.5ml, Screwcap tube, Self-standing Bottom, tube &1000cap, Natural1000 GEN-SCV-15-SS Genaxy 1.5ml, Screwcap tube, Self-standing Bottom, tube &cap, Natural1000 GEN-SCV-15-C Genaxy 1.5ml, Screwcap tube, Conical Bottom, tube & cap,Natural1000 GEN-SCV-20-SS Genaxy 2.0ml, Screwcap tube, Self-standing Bottom, tube &cap, NaturalGEN-SCV-20-C Genaxy 2.0ml, Screwcap tube, Conical Bottom, tube & cap,1000Natural5000 GEN-SCV-05-LP-SS Genaxy0.5ml, Screwcap tube attached Loop cap, Self-standing Bottom, Natural5000 GEN-SCV-15-LP-C Genaxy 1.5ml, Screwcap tube attached Loop cap, ConicalBottom, NaturalGEN-SCV-15-LP-SS Genaxy 1.5ml, Screwcap tube attached Loop cap, Self-5000standing Bottom, Natural5000 GEN-SCV-20-LP-C Genaxy 2.0ml, Screwcap tube attached Loop cap, ConicalBottom, Natural5000 GEN-SCV-20-LP-SS Genaxy 2.0ml, Screwcap tube attached Loop cap, Self-standing Bottom, NaturalGEN-ST-050-C Genaxy0.5ml Conical Screw Cap Tube & Caps with O-Ring500x2500x2 GEN-ST-050-CS Genaxy0.5ml Conical Screw Cap Tube & Caps with O-Ring,Sterile500x2 GEN-ST-050-SS-C Genaxy0.5ml Self-Standing Screw Cap Tube & Caps with 0-Ring500x2 GEN-ST-050-SS-CS Genaxy0.5ml Self-Standing Screw Cap Tube & Caps with 0-Ring, SterileGEN-ST-150-C Genaxy 1.5ml Conical Screw Cap Tube & Caps with O-Ring500x2GEN-ST-150-CS Genaxy 1.5ml Conical Screw Cap Tube & Caps with O-Ring,500x2Sterile500x2 GEN-ST-150-SS-C Genaxy 1.5ml Self-Standing Screw Cap Tube & Caps with 0-Ring500x2 GEN-ST-150-SS-CS Genaxy 1.5ml Self-Standing Screw Cap Tube & Caps with O-Ring, SterileGEN-ST-200-C Genaxy 2.0ml Conical Screw Cap Tube & Caps with O-Ring500x2500x2 GEN-ST-200-CS Genaxy 2.0ml Conical Screw Cap Tube & Caps with O-Ring,Sterile500x2 GEN-ST-200-SS-C Genaxy 2.0ml Self-Standing Screw Cap Tube & Caps with O-RingGEN-ST-200-SS-CS Genaxy 2.0ml Self-Standing Screw Cap Tube & Caps with O-500x2Ring, SterileGEN-ST-5ml Genaxy5ml Storage Tube200 GEN-ST-10ml Genaxy12ml Storage Tube250 GEN-1275-PS Genaxy Ria Tube, 12 X 75mm, Polystyrene500 GEN-1275-PP Genaxy Ria Tube, 12 X 75mm, Polypropylene500 GEN-1275-PP-X Genaxy Ria Tube, 12 X 75mm, Polypropylene, Amber Color500GEN-12-CAP Genaxy Ria Tube Cap, 12mm500 GEN-12-CAP-X Genaxy Ria Tube Cap, 12mm , Amber Color500 GEN-WG30Genaxy13 X 75mm PP Test Tube w/Screw Cap4000 GEN-CT-15ML Genaxy15ml, Conical Bottomed Tube with Cap500500 GEN-CT-15ML-S Genaxy15ml, Conical Bottomed Tube with Cap Pre-sterilizedGEN-CT-15ML-R Genaxy15ml, Conical Bottomed Tube with Cap, Racked500500 GEN-CT-15ML-R-S Genaxy15ml, Conical Bottomed Tube with Cap, Racked, Pre-sterilizedGEN-CT-50ML Genaxy50ml, Conical Bottomed Tube with Cap500500 GEN-CT-50ML-S Genaxy50ml, Conical Bottomed Tube with Cap Pre-sterilizedGEN-CT-50ML-R Genaxy50ml, Conical Bottomed Tube with Cap, Racked300GEN-CT-50ML-R-S Genaxy50ml, Conical Bottomed Tube with Cap, Racked, Pre-300sterilizedGEN-CT-50ML-SS-S Genaxy50ml, Self Standing Tube with Cap, Sterile500GEN-CT-30ML-SS-S Genaxy30ml, Self Standing Tube with Cap, Sterile500GEN-CT-50ML-U Genaxy50ml, Round Bottom Centrifuge Tube500GEN-CT-10ML-U Genaxy10ml, Round Bottom Centrifuge Tube2000GEN-CT-7ML-U Genaxy7ml, Round Bottom Centrifuge Tube2000500GEN-SER-1ML-S Genaxy 1 ml pipette individually wrapped, paper/plasticpeel-packGEN-SER-2ML-S Genaxy 2 ml pipette individually wrapped, paper/plastic500peel-pack250GEN-SER-5ML-S Genaxy 5 ml pipette individually wrapped, paper/plasticpeel-pack200GEN-SER-10ML-S Genaxy10 ml pipette individually wrapped, paper/plasticpeel-packGEN-SER-25ML-S Genaxy25 ml pipette individually wrapped, paper/plastic200peel-packGEN-SER-50ML-S Genaxy50 ml pipette individually wrapped, paper/plastic100peel-packGEN-CV-1.8ml-E Genaxy Cryogenic Vial, 1.8ml, Sterilized, Graduated50X1050X10GEN-CV-1.8ml-EX Genaxy Cryogenic Vial, 1.8ml, Sterilized, Graduated, AmberColorGEN-CB-81W Genaxy Cardboard Cryogenic Vial Boxes for121.5/2.0ml L x W x H: (13.3 x 13.3 x 5 cm) White50 X 10 Tubes GEN-CVE-1.2ml Genaxy Cryogenic Vial, 1.2ml, Sterilized, Graduated1.2ml50 X 10 Tubes GEN-CVE-2.0ml Genaxy Cryogenic Vial, 2.0ml, Sterilized, Graduated2.0mlGEN-CVE-5.0ml Genaxy Cryogenic Vial, 5.0ml, Sterilized, Graduated25 X 10 Tubes5.0ml50 X 10 Tubes GEN-CVE-1.2ml-X Genaxy Cryogenic Vial, 1.2ml, Sterilized, Graduated, AmberColor 1.2ml50 X 10 Tubes GEN-CVE-2.0ml-X Genaxy Cryogenic Vial, 2.0ml, Sterilized, Graduated, AmberColor 2.0mlGEN-CVE-5.0ml-X Genaxy Cryogenic Vial, 5.0ml, Sterilized, Graduated, Amber25 X 10 TubesColor 5.0ml50 X 10 Tubes GEN-CVI-1.2m Genaxy Cryogenic Vial, 1.2ml, Sterilized, Graduated1.2ml50 X 10 Tubes GEN-CVI-2.0ml Genaxy Cryogenic Vial, 2.0ml, Sterilized, Graduated2.0ml25 X 10 Tubes GEN-CVI-5.0ml Genaxy Cryogenic Vial, 5.0ml, Sterilized, Graduated5.0mlGEN-CVI-1.2ml-X Genaxy Cryogenic Vial, 1.2ml, Sterilized, Graduated, Amber50 X 10 TubesColor 1.2ml50 X 10 Tubes GEN-CVI-2.0ml-X Genaxy Cryogenic Vial, 2.0ml, Sterilized, Graduated, AmberColor 2.0mlGEN-CVI-5.0ml-X Genaxy Cryogenic Vial, 5.0ml, Sterilized, Graduated, Amber25 X 10 TubesColor 5.0mlGEN-PD-IN Genaxy Pickup Device for Internal Thread Cryo Vials10/PkGEN-PD-EX Genaxy Pickup Device for External Thread Cryo Vials10/PkGEN-BC-CI-Y Genaxy Cap Inserts for Internal Thread Vials, Yellow50/PkGEN-BC-CI-L Genaxy Cap Inserts for Internal Thread Vials, Lime Green50/PkGEN-BC-CI-P Genaxy Cap Inserts for Internal Thread Vials, Pink50/PkGEN-BC-CI-PU Genaxy Cap Inserts for Internal Thread Vials, Purple50/Pk。
IMEX FUTURA S.A.C紫色玉米常规说明书
5 large lemons juiced
1 1/2 cups brown sugar
15oz 干紫色玉米 3 根肉桂棒 1 汤匙整瓣 5 大柠檬榨汁 1 1 / 2 杯红糖 半杯新鲜菠萝碎 半个苹果碎 6 升水
Facility certifications 设备认证
2 year
Daniel Saint-Pere Caprile 20´ FCL with 22 MT – Eur / 20´ FCL with South America 10 pallets 21.5MT– Au/ 40´ FCL with Canada 19.9 20 pallets
Art.:
Name:
PURPLE CORN CONVENTIONAL
Labelling 标签
Product name, ingredients, allergen information, net weight, EAN-code, nutrition facts, shelf life, address, storing conditions, trazability information lot, manufacturing date, product use. 产品名称、成分、过敏原信息、净重、条形码、营养事实、保质期、地
PURITY CHARACTERISTICS 纯度特性 Purity (%)纯度
Foreign seeds(%)外来种子 Moisture (%)水分
99.95% 0.05% max. 13.0% max.
IMEX FUTURA S.A.C|C/Tulipanes 147 of 304, Centro Emp. Blu Building Urb. Polo Hunt. Surco- Lima,Perú.T 51(1)7193969
60份福建地方龙眼资源果实性状鉴定评
Southeast Horticulture东南园艺2022，10（5）：321-327 60份福建地方龙眼资源果实性状鉴定评价陈秀萍，许奇志，蒋际谋，胡文舜（福建省农业科学院果树研究所/福建省龙眼枇杷育种工程技术研究中心，福建 福州 350013）摘要：以2015-2021年调查收集的60份福建地方龙眼资源为试材，对原产地的果实性状进行鉴定。
结果表明，60份福建地方龙眼资源果实性状多样性丰富，果形、果肉质地、流汁程度、离核难易、风味等5个描述性状共有19种类型；11个数量性状的变异系数8.09%~32.97%，单果重、果实纵径、横径、侧径、果肉厚度、种子重、种子占比、果皮重、果皮占比、可食率等10个性状呈偏小分布，可溶性固形物含量呈偏大分布。
单果重、果实纵径、横径、侧径、果皮重、种子重间极显著正相关；可食率与单果重、果实纵径、横径、侧径、果肉厚度间极显著正相关，与种子占比、果皮占比呈极显著负相关；可溶性固形物含量与种子占比极显著正相关。
评价筛选出综合性状优良的种质2份、大果种质1份、高糖种质4份。
本研究为福建地方龙眼资源的保护与利用提供了科学依据。
关键词：龙眼；地方资源；果实性状；鉴定评价；福建中图分类号：S667.2 文献标识码：A 文章编号：2095-5774（2022）05-0321-07DOI ：10.20023/ki.2095-5774.2022.05.001Identification and Evaluation of Fruit Traits of 60 Longan Landracesin Fujian Province of ChinaCHEN Xiu-ping， XU Qi-zhi，JIANG Ji-mou，HU Wen-shun（Fruit Research Institute ，Fujian Academy of Agricultural Sciences/Fujian Breeding Engineering Technology ResearchCenter for Longan & Loquat ，Fuzhou ，Fujian 350013，China ）Abstract：Sixty longan landraces investigated and collected in Fujian Province from 2015 to 2021 were used as materials to indentify fruit traits of these landraces. The results showed that the diversity of 60 longan resources in Fujian province was rich. There were 19 types in five description characters including shape of fruit， texture of陈秀萍，许奇志，蒋际谋，胡文舜.60份福建地方龙眼资源果实性状鉴定评价［J］.东南园艺，2022，10（5）：321-327.CHEN Xiu-ping， XU Qi-zhi，JIANG Ji-mou，HU Wen-shun. Identification and Evaluation of Fruit Traits of 60 Longan Landraces in Fujian Province of China［J］. Southeast Horticulture，2022，10（5）：321-327.收稿日期：2022-07-11基金项目：福建省农业种质资源创新专项（ZZZYCXZX202207）；国家现代农业产业技术体系专项资金项目（CARS-32-06）；国家科技部、财政部国家科技资源共享服务平台项目（NHGRC2022-NH18-1）；福建省农业科学院科技创新团队（CXTD2021004-1）；国家科技计划项目（2021L3022） ；农业农村部热带作物种质资源保护项目（18220025）作者简介：322第10卷东南园艺flesh， watery degree of flesh surface， adherence of seed to flesh， flavor of flesh. The coefficient of variation of11 quantitative traits of fruit ranged from 8.09% to 32.97%. Ten traits， including single fruit weight， longitudinaldiameter of fruit， transverse diameter of fruit， lateral diameter of fruit， thickness of flesh， seed weight， ratio of seed to fruit weight， pericarp weight， ratio of pericarp to fruit weight， and edible ratio showed small trend while soluble solids content showed large trend.. The fruit weight， longitudinal diameter of fruit， transverse diameter of fruit， lateral diameter of fruit， pericarp weight and seed weight had significantly positive correlation among each other and the edible ratio had significantly positive correlation with fruit weight， longitudinal diameter of fruit， transverse diameter of fruit， lateral diameter of fruit and thickness of flesh while the edible ratio had significantly negative correlation with the ratio of pericarp to fruit weight and the ratio of seed to fruit weight， the soluble solids content was positively correlated with the ratio of seed to fruit weight. Two accessions with excellent comprehensive characters， one accessions with big fruit and four accessions with high sugar content were selected.This study provides a scientific basis for the protection and utilization of longan landraces in Fujian province.Key words：Longan；Landraces；Fruit Traits；Identification and Evaluation；Fujian龙眼（Dimocarpus longan Lour.）是原产我国南方的亚热带特色果树［1］，其果实性状如单果重、种子重、果皮重、果肉厚度、可溶性固形物含量、可食率等，是衡量果实食用品质和商品性的主要评价指标［2］，也是育种家和生产者关注的核心性状［3，4］。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
格信息
被抽样单位 所在省份 四川 四川 四川 四川 四川 四川 四川 四川 四川 四川 四川 四川 食品名称 陈醋（酿造食醋） 一级酱油（酿造酱 油） 口蘑酱油（酿造酱 油） 陈醋（酿造食醋） 纯味精 规格型号 380ml/袋 （固态发 酵） 400ml/袋 （高盐稀态 佐餐和烹 380ml/袋 （高盐稀态 佐餐和烹 400ml/袋 （固态发 酵） 400g/袋 （谷氨酸钠 ≥99%） 200g/袋 生产日期/批 号 2015-3-18 2015-4-2 2015-3-13 2015-3-26 2015-1-15 2015-1-20 2014-10-23 2015-3-5 2015-1-14 2015-3-13 2015-4-1 2015-3-27 备注
产品合格信息
序号 1 2 3 4 5 6 7 8 9 10 11 12 标称生产企业名称 成都国酿食品股份有限公 司 成都国酿食品股份有限公 司 成都国酿食品股份有限公 司 成都国酿食品股份有限公 司 标称生产企业地址 被抽样单位名称
（声明：以下信息仅指本次抽检标称的生产企业相关产品的生产日期
成都市新都区新繁镇新繁大道 成都国酿食品股份有限公司 8号 成都市新都区新繁镇新繁大道 成都国酿食品股份有限公司 8号 成都市新都区新繁镇新繁大道 成都国酿食品股份有限公司 8号 成都市新都区新繁镇新繁大道 成都国酿食品股份有限公司 8号 成都市新都区新繁镇泡菜（食 成都市金友邦食品厂 成都市金友邦食品厂 品）产业园 成都市锦江区三圣乡驸马村一 北京华联综合超市股份有限公 成都全味轩味业有限公司 组 司攀枝花分公司 北京华联综合超市股份有限公 成都丰味居食品有限公司 成都市郫县郫筒镇工业园区 司攀枝花分公司 四川豪吉食品有限公司 四川省凉山州普格县新建北街 北京华联综合超市股份有限公 （代码P） 329号 司攀枝花分公司 四川西府食品有限责任公 四川省雅安市名山区新店镇长 四川西府食品有限责任公司 司 春村一组 成都丰味居食品有限公司 成都丰味居食品有限公司 成都丰味居食品有限公司 成都市郫县郫筒镇工业园区 成都市郫县郫筒镇工业园区 成都市郫县郫筒镇工业园区 成都丰味居食品有限公司 成都丰味居食品有限公司 成都丰味居食品有限公司
成都丰味居食品有限公司 成都美尚美食品有限公司 成都美尚美食品有限公司 成都美尚美食品有限公司 成都美尚美食品有限公司 成都美尚美食品有限公司 四川省满江红食品科技有限公 司 四川省满江红食品科技有限公 司 四川省满江红食品科技有限公 司 四川省满江红食品科技有限公 司 四川省丹丹调味品有限公司 四川金点食品有限公司 四川金点食品有限公司 四川金点食品有限公司 四川省满江红食品科技有限公 司 四川省丹丹调味品有限公司 四川 高福记食品有限公司 四川金点食品有限公司 四川省丹丹调味品有限公司
成都市郫县郫筒镇工业园区 四川省成都市郫县安德镇中国 川菜产业化功能区永和路 四川省成都市郫县安德镇中国 川菜产业化功能区永和路 四川省成都市郫县安德镇中国 川菜产业化功能区永和路 四川省成都市郫县安德镇中国 川菜产业化功能区永和路 四川省成都市郫县安德镇中国 川菜产业化功能区永和路 成都市郫县安德镇中国川菜产 业化园区蜀风路 成都市郫县安德镇中国川菜产 业化园区蜀风路 成都市郫县安德镇中国川菜产 业化园区蜀风路 成都市郫县安德镇中国川菜产 业化园区蜀风路 成都市郫县中国川菜产业化园 区永安路38号 成都市郫县成都现代工业港安 德川菜产业化园区蜀风路228 号 成都市郫县成都现代工业港安 德川菜产业化园区蜀风路228 号 成都市郫县成都现代工业港安 德川菜产业化园区蜀风路228 号 成都市郫县安德镇中国川菜产 业化园区蜀风路 成都市郫县中国川菜产业化园 区永安路38号 成都市郫县新民工业区
13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
成都丰味居食品有限公司 成都美尚美食品有限公司 成都美尚美食品有限公司 成都美尚美食品有限公司 成都美尚美食品有限公司 成都美尚美食品有限公司 四川省满江红食品科技有 限公司 四川省满江红食品科技有 限公司 四川省满江红食品科技有 限公司 四川省满江红食品科技有 限公司 四川省丹丹调味品有限公 司 四川金点食品有限公司 四川金点食品有限公司 四川金点食品有限公司 四川省满江红食品科技有 限公司 四川省丹丹调味品有限公 司 四川高福记食品有限公司 四川金点食品有限公司
调味品监督抽检合格信息
本次抽检的调味品主要包括食醋（酿造食醋、配制食醋）、酱油（酿造 料（半固态复合调味料、固体复合调味料）、味精、香辛料类（香辛料调味 抽检依据是《食品安全国家标准 食品添加剂使用标准》（GB 2760-2011 食品中真菌毒素限量》（GB 2761-2011）、《食品安全国家标准 食品中污染 2012）、《食醋卫生标准》（GB 2719-2003）、《酿造酱油》（GB 18186-20 （GB 2717-2003）、《关于印发〈食品中可能违法添加的非食用物质和易滥 （第一批）〉的通知》(食品整治办〔2008〕3号)等标准、法规及产品明示标 抽检项目包括重金属、品质指标、生物毒素、食品添加剂、微生物指标 标。产品合格31批次。 抽检产品合格信息见附表。 附表：产品合格信息
175g/袋 280g/瓶 150g/袋 150g/袋 220g/袋 240g/袋 150g/袋 168g/袋 150g/袋 150g/袋 150g/袋 252ML/瓶 380ML/瓶 130ML/瓶 220g/袋 300g/袋 210ML/瓶 308ML/瓶 400g/袋
2015-2-10 2015-3-12 2015-3-28 2015-4-1 2015-3-28 2015-3-20 2015-3-25 2015-3-26 2015-3-18 2015-3-21 2015-3-30 2015-3-27 2015-4-1 2015-4-1 2015-3-17 2015-3-26 2015-3-11 2015-4-3 2015-3-30
成都市郫县成都现代工业港安 德川菜产业化园区蜀风路228 号 四川省丹丹调味品有限公 成都市郫县中国川菜产业化园 司 区永安路38号
抽检合格信息
配制食醋）、酱油（酿造酱油、配制酱油）、调味 、香辛料类（香辛料调味油）等。 用标准》（GB 2760-2011）、《食品安全国家标准 安全国家标准 食品中污染物限量》（GB 2762酿造酱油》（GB 18186-2000）、《酱油卫生标准》 添加的非食用物质和易滥用的食品添加剂品种名单 标准、法规及产品明示标准和质量的要求。 食品添加剂、微生物指标和非食用物质等共41个指
企业相关产品的生产日期/批号和所检项目）
香水鱼调料（半固 态复合调味料） 香水鱼调料（半固 210g/袋 态复合调味料） （主料包 豪吉鸡精（鸡精调 185g 香辣 454g/袋 味料） 西府火锅底料（半 150g/袋 固态调味料） 火锅底料【无牛油 165g/袋 】 精品香水鱼调料 烧鸡公四川 四川 四川 四川 四川 四川 四川 四川 四川 四川 四川 四川 四川 四川 四川 四川 四川 四川
香辣鱼调料 香辣味夹馍酱 火锅底料 清油火锅底料 水煮鱼调料 青花椒麻辣鱼调料 香辣龙虾调料 烧鸡公调料 麻辣烫底料 火锅底料 菜油火锅底料 鲜藤椒油 鲜花椒油 鲜花椒油 水煮鱼调料 浓缩火锅底料 花椒油 花椒油 浓缩火锅底料