150D685X0006A2中文资料
爱达顿199162商品说明书
Eaton 199162Eaton Moeller® series PKZM0 Motor-protective circuit-breaker, 15kW, 25 - 32 A, Push in terminalsGeneral specificationsEaton Moeller® series PKZM0 Motor-protective circuit-breaker199162401508197246375 mm109 mm45 mm0.341 kgIEC/EN 60947VDE 0660ULCSAIEC/EN 60947-4-1UL 60947-4-1CSA-C22.2 No. 60947-4-1-14 CEUL File No.: E36332UL Category Control No.: NLRV CSA File No.: 165628CSA Class No.: 3211-05ULCSA PKZM0-32-PIProduct Name Catalog NumberEANProduct Length/Depth Product Height Product Width Product Weight Certifications Model CodeTurn buttonPhase-failure sensitivity (according to IEC/EN 60947-4-1, VDE 0660 Part 102)Motor protectionPhase failure sensitiveThree-pole 100,000 operations100,000 OperationsDIN rail (top hat rail) mounting optionalCan be snapped on to IEC/EN 60715 top-hat rail with 7.5 or15 mm height.40 Operations/hIII3Motor protective circuit breakerFinger and back-of-hand proof, Protection against direct contact when actuated from front (EN 50274)6000 V AC25 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 msAlso motors with efficiency class IE3Branch circuit: Suitable for group installations, (UL/CSA)-5 - 40 °C to IEC/EN 60947, VDE 0660≤ 0.25 %/K, residual error for T > 40°-25 - 55 °C, Operating rangeMotor starter combinations type MSC...Actuator type Features Functions Number of poles Lifespan, electricalLifespan, mechanicalMounting MethodMounting positionOperating frequencyOvervoltage categoryPollution degreeProduct categoryProtectionRated impulse withstand voltage (Uimp) Shock resistanceSuitable forTemperature compensationUsed withMax. 2000 m-25 °C55 °C25 °C40 °C40 °C80 °CDamp heat, cyclic, to IEC 60068-2-30 Damp heat, constant, to IEC 60068-2-781 x (1 - 6) mm²18 - 812 mm50 Hz60 Hz32 A7.5 kW15 kW690 V690 V32 A496 A, Irm, Setting range max. ± 20% tolerance, Trip blocksBasic device fixed 15.5 x Iu, Trip Blocks7.5 HP5 HP10 HP20 HP25 HPAltitude Ambient operating temperature - min Ambient operating temperature - max Ambient operating temperature (enclosed) - min Ambient operating temperature (enclosed) - max Ambient storage temperature - min Ambient storage temperature - max Climatic proofingTerminal capacity (flexible)Terminal capacity (solid/stranded AWG)Stripping length (main cable)Rated frequency - min Rated frequency - max Rated operational current (Ie)Rated operational power at AC-3, 220/230 V, 50 Hz Rated operational power at AC-3, 380/400 V, 50 Hz Rated operational voltage (Ue) - min Rated operational voltage (Ue) - max Rated uninterrupted current (Iu)Short-circuit releaseAssigned motor power at 200/208 V, 60 Hz, 3-phase Assigned motor power at 230/240 V, 60 Hz, 1-phase Assigned motor power at 230/240 V, 60 Hz, 3-phase Assigned motor power at 460/480 V, 60 Hz, 3-phase Assigned motor power at 575/600 V, 60 Hz, 3-phasePush in terminals032 A32 AOverload trigger: tripping class 10 A 9.56 W0 W0 W0 WMeets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Connection Number of auxiliary contacts (change-over contacts)Number of auxiliary contacts (normally closed contacts)Number of auxiliary contacts (normally open contacts)Overload release current setting - min Overload release current setting - max Tripping characteristic Equipment heat dissipation, current-dependent PvidHeat dissipation capacity PdissHeat dissipation per pole, current-dependent PvidStatic heat dissipation, non-current-dependent Pvs10.2.2 Corrosion resistance10.2.3.1 Verification of thermal stability of enclosures10.2.3.2 Verification of resistance of insulating materials to normal heat10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects10.2.4 Resistance to ultra-violet (UV) radiation10.2.5 Lifting10.2.6 Mechanical impact10.2.7 InscriptionsDoes not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Is the panel builder's responsibility. The specifications for the switchgear must be observed.The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.Motor Starters in System xStart - brochureSave time and space thanks to the new link module PKZM0-XDM32MEProduct Range Catalog Switching and protecting motorsSwitching and protecting motors - catalogDA-DC-00004889.pdfDA-DC-00004919.pdf121X042121X002eaton-manual-motor-starters-pkz-dimensions.epseaton-manual-motor-starters-pkz-dimensions-002.epseaton-manual-motor-starters-pkzm-pkzm0-dimensions.epsETN.PKZM0-32-PI.edzIL122024ZUWIN-WIN with push-in technologymotorschutzschalter_bis_32a_pi.dwgpkzm0_pi.stp10.3 Degree of protection of assemblies10.4 Clearances and creepage distances10.5 Protection against electric shock10.6 Incorporation of switching devices and components 10.7 Internal electrical circuits and connections10.8 Connections for external conductors10.9.2 Power-frequency electric strength10.9.3 Impulse withstand voltage10.9.4 Testing of enclosures made of insulating material 10.10 Temperature rise10.11 Short-circuit rating10.12 Electromagnetic compatibility10.13 Mechanical function BrochuresCatalogues Declarations of conformity DrawingseCAD modelInstallation instructions Installation videosmCAD modelEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All rights reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia。
LC1F150产品数据手册说明书
LC1F150i s c l a ime r : T h i s d o c u m e n t a t i o n i s n o t i n t e n d e d a s a s u b s t i t u t ef o r a n d i s n o t t o b e u s e d f o r d e t e r m i n i ng s u i t a b i l i t y o r r e l i a b i l i t y o f th e s e p r o d u c t s f o r s p e ci f i c u s e r a p p l i c a t i o n sProduct data sheetCharacteristicsLC1F150TeSys F contactor - 3P(3 NO) - AC-3 - <= 440 V 150 A - without coilMainRange TeSys Product nameTeSys F Product or component type Contactor Device short name LC1F Contactor application Motor control Resistive load Utilisation categoryAC-4AC-1AC-3Poles description 3P Pole contact composition 3 NO[Ue] rated operational voltage <= 1000 V AC 50/60 Hz <= 460 V DC[Ie] rated operational current 250 A (<= 40 °C) at <= 440 V AC AC-1150 A (<= 55 °C) at <= 440 V AC AC-3Motor power kW65 kW at 1000 V AC 50/60 Hz AC-375 kW at 380...400 V AC 50/60 Hz AC-390 kW at 500 V AC 50/60 Hz AC-3100 kW at 660...690 V AC 50/60 Hz AC-322 kW at 400 V AC 50/60 Hz AC-480 kW at 415 V AC 50/60 Hz AC-380 kW at 440 V AC 50/60 Hz AC-340 kW at 220...240 V AC 50/60 Hz AC-3Complementary[Uimp] rated impulse withstand voltage 8 kV Overvoltage categoryIII[Ith] conventional free air thermal current250 A at <= 40 °CIrms rated making capacity 1500 A AC conforming to IEC 60947-4-1Rated breaking capacity1200 A conforming to IEC 60947-4-1[Icw] rated short-time withstand current1200 A <= 40 °C 10 s700 A <= 40 °C 30 s600 A <= 40 °C 1 min450 A <= 40 °C 3 min350 A <= 40 °C 10 minAssociated fuse rating160 A aM at <= 440 V250 A gG at <= 440 VAverage impedance0.35 mOhm at 50 Hz - Ith 250 A[Ui] rated insulation voltage1000 V conforming to IEC 60947-4-11500 V conforming to VDE 0110 group CPower dissipation per pole22 W AC-18 W AC-3Mounting support PlateStandards JIS C8201-4-1IEC 60947-4-1EN 60947-4-1EN 60947-1IEC 60947-1Product certifications LROS (Lloyds register of shipping)CSAULDNVABSBVRMRoSRINACBConnections - terminals Power circuit : connector 1 cable(s) 120 mm²Power circuit : lugs-ring terminals 1 cable(s) 120 mm²Power circuit : bolted connectionPower circuit : bar 2 x (25 x 3 mm)Tightening torque Power circuit : 18 N.mEnvironmentIP degree of protection IP2x front face with shrouds (ordered separately) conforming to IEC 60529IP2x front face with shrouds (ordered separately) conforming to VDE 0106 Protective treatment THAmbient air temperature for operation-5...55 °CAmbient air temperature for storage-60...80 °C-40...70 °CPermissible ambient air temperaturearound the deviceOperating altitude3000 m without derating in temperatureMechanical robustness Vibrations contactor closed 6 Gn, 5...300 HzShocks contactor open 9 Gn for 11 msVibrations contactor open 2 Gn, 5...300 HzShocks contactor closed 15 Gn for 11 msHeight170 mmWidth163.5 mmDepth171 mmProduct weight 3.83 kgOffer SustainabilitySustainable offer status Green Premium productRoHS (date code: YYWW)Compliant - since 0843 - Schneider Electric declaration of conformitySchneider Electric declaration of conformityREACh Reference not containing SVHC above the thresholdReference not containing SVHC above the thresholdProduct environmental profile AvailableProduct environmentalProduct end of life instructions AvailableEnd of life manual Contractual warrantyWarranty period18 monthsLC1F150。
电主轴手册 Z45-D160.02 S5A2说明书
手册Z45-D160.02 S5A2高频主轴气动直接换刀电主轴的标记系列号额定转速因为本公司的电主轴始终保持最新技术研发水平，所以我们保留更改和与本说明书中的实施方案相比的技术改进和不同内容。
本手册文字说明经过极为认真地编写。
但是错误和疏漏在所难免，对于因此而引起的后果，Alfred Jäger GmbH概不承担法律责任及任何其它责任。
未经 Alfred Jäger GmbH 明确的书面同意，不得翻译和复制（即使是节选）。
目录:原厂手册的翻译文本1初步信息 5 1.1手册用途 (5)1.2符号说明 (5)2运输和包装 6 2.1电主轴的供货范围 (6)2.1.1维修工具 (6)2.1.2可选配件 (6)2.1.3随产品附带的技术资料 (7)2.2电主轴的包装 (7)3按规程使用 8 3.1允许的加工类型 (8)3.2允许材料 (8)4安全注意事项 9 4.1工作要具备安全意识 (10)4.2电主轴的停止运转 (11)4.3安装维修 (11)4.4改装维修 (11)4.5不正确的操作方法 (11)5技术说明 12 5.1电主轴的接口 (12)5.2电气连接 (12)5.3冷却 (13)5.3.1通过电主轴托架冷却 (13)5.4密封空气 (13)5.5气动刀具更换 (13)6技术参数 14 6.1尺寸 (15)6.2技术数据页 (KL2006 , 交流电机) (16)6.2.1功率图 (17)6.3电路图 (18)6.4电机保护 PTC 100° C (19)6.5转速传感器（数字磁敏电阻） (20)6.6ESD 保护 (20)6.7空气传播听觉范围内的声音 (21)7操作地点 228安装 23 8.1安装电主轴 (23)8.2介质引线直径 (23)8.3压缩空气 (24)8.3.1气体纯度等级 (ISO 8573-1) (24)8.3.2调节密封空气 (24)8.3.3调节值 (25)9调试 26 9.1进料示意图 (26)9.2每天启动 (27)9.3停止信息 (27)9.4存放之后启动 (27)10刀具更换 28 10.1顺时针旋转 (28)10.2气动直接换刀 (28)10.2.1更换夹头 (29)10.3刀具更换站（可选附件） (30)10.3.1气动直接换刀 (30)10.3.2安装更换站 (30)10.3.3维修 (30)11高速加工刀具 31 11.1折断的刀具 (31)12维修 32 12.1球轴承 (32)12.2每日清洁 (32)12.2.1开始工作前 (32)12.2.2每次刀具更换时 (32)12.2.3每次更换夹具时 (32)12.3存放时 (33)12.4月维修 (33)12.5在长期存放条件下 (33)12.6最长存放期限 (33)13拆除 34 13.1废物处理及环境保护 (34)14服务和维修 35 14.1特约维修站 (35)14.2工作故障 (36)15安装声明 39目录:初步信息1初步信息高速电主轴（电主轴）是适用于高速加工的高质量精密刀具。
SDX15D4;SDX15A2;SDX01G2;SDX100G2;SDX01D4;中文规格书,Datasheet资料
SDX SeriesPlastic Silicon Pressure SensorsLow Cost, TemperatureCompensated, DIP, 0 psi to 1 psi, 0 psi to 100 psiDESCRIPTIONThe SDX Series sensors provide a very cost-effective solution for pressure applications that require small size plusperformance. These calibrated and temperature-compensated sensors give an accurate and stable output over a 0 °C to 50 °C [32 °F to 122 °F] temperature range. This series is intended for use with non-corrosive, non-ionic working fluids such as air and dry gases.Devices are available to measure absolute and gage pressures from 1 psi (SDX01) up to 100 psi (SDX100). The absolute devices have an internal vacuum reference and an output voltage proportional to absolute pressure. The SDX devices are available in standard commercial and prime grades(SDCXXXXX -A ) to allow optimization of accuracy and cost in any given application.The SDX devices feature an integrated circuit (IC) sensor element and laser trimmed thick film ceramic housed in acompact solvent resistant case. The package is a double-wide, dual-inline package (DIP). This is the same familiar package used by IC manufacturers except it is only 11,94 mm [0.470 in] long and has a pressure port(s). The PC board area used by each DIP is approximately 0.26 in 2. This extremely small size enables the use of multiple sensors in limited available space. The DIP provides excellent corrosion resistance and isolation to external package stress.The DIP mounts on a PC board like a standard IC withthrough-hole pins. The pins anchor the pressure sensor to the PC board and provide a more secure and stable unit than other types of packages.The output of the bridge is ratiometric to the supply voltage and operation from any dc supply voltage up to 20 Vdc is acceptable.FEATURES • Low cost DIP• Precision temperature compensation • Calibrated zero and span • Small size • Low noise• High impedance for low power applications POTENTIAL APPLICATIONS • Medical equipment • Computer peripherals • Pneumatic controls • HVAC • Prime grade available (SDXxxxyy-A)SDX Series2 /sensingTable 1. Pressure Range Specifications and Ordering InformationCatalog Listing, Pressure Connection,Pressure TypeFull-Scale Span (1) Gage Differential/Gage AbsoluteOperating PressureProof Pressure (2) Min. Typ. Max. SDX01G2 SDX01D4 - 17.37 mV 18.00 mV 18.18 mVSDX01G2-A SDX01D4-A - 0 psid to 1 psid 20 psid17.82 mV 18.00 mV 18.80 mV SDX05G2 SDX05D4 - 57.90 mV 60.00 mV 62.10 mVSDX05G2-A SDX05D4-A - 0 psid to 5 psid 20 psid59.40 mV 60.00 mV 60.60 mV SDX15G2 SDX15D4 - 86.85 mV 90.00 mV 93.15 mVSDX15G2-A SDX15D4-A - 0 psid to 15 psid 30 psid89.10 mV 90.00 mV 90.90 mV- - SDX15A2 86.85 mV 90.00 mV 93.15 mV - - SDX15A4 86.85 mV 90.00 mV 93.15 mV- - SDX15A2-A 89.10 mV 90.00 mV 90.90 mV - - SDX15A4-A 0 psia to 15 psia 30 psia89.10 mV 90.00 mV 90.90 mVSDX30G2 SDX30D4 - 86.85 mV 90.00 mV 93.15 mVSDX30G2-A SDX30D4-A - 0 psid to 30 psid 60 psid89.10 mV 90.00 mV 90.90 mV- - SDX30A2 86.85 mV 90.00 mV 93.15 mV - - SDX30A4 86.85 mV 90.00 mV 93.15 mV- - SDX30A2-A 89.10 mV 90.00 mV 90.90 mV - - SDX30A4-A 0 psia to 30 psia 60 psia89.10 mV 90.00 mV 90.90 mVSDX100G2 SDX100D4 - 96.50 mV 100.00 mV 103.5 mVSDX100G2-A SDX100D4-A- 0 psid to 100 psid 150 psid99.00 mV 100.00 mV 101.0 mV - - SDX100A2 96.50 mV 100.00 mV 103.5 mV - - SDX100A4 96.50 mV 100.00 mV 103.5 mV - - SDX100A2-A 99.00 mV 100.00 mV 101.0 mV- - SDX100A4-A0 psia to 100psia 150 psia99.00 mV 100.00 mV 101.0 mV Nomenclature Pressure Connection (See Fig. 2)Pressure Type GradeG2 A2/G2 gage standard commercial G2-A A2/G2 gage prime D4 OK differential standard commercial D4-A OK differential prime A2 A2/G2 absolute standard commercial A2-A A2/G2 absolute prime A4 A4 absolute standard commercial A4-A A4 absolute primeTable 2. General Specifications (Maximum)Characteristic ParameterSupply voltage (V S) 20 Vdc Common mode pressure 150 psig Lead soldering temperature (2 s to 4 s) 250 °C [482 °F]Table 3. Environmental Specifications (Maximum)Characteristic Parameter Compensated operating temperature 0 °C to 50 °C [32 °F to 122 °F] Operating temperature -40 °C to 85 °C [-40 °F to 185 °F] Storage temperature -55 °C to 125 °C [-67 °F to 257 °F] Humidity limits 0% RH to 100% RHPlastic Silicon Pressure Sensors, Low Cost, TemperatureCompensated, DIP, 0 psi to 1 psi, 0 psi to 100 psiHoneywell Sensing and Control 3Table 4. Performance Characteristics (3)Characteristic Min. Typ. Max. Unit Zero pressure offset Zero pressure offset (prime grade) (4)-1.0 -0.3 0.0 0.0 +1.0 0.3 mVmV Combined linearity and hysteresis (5) Combined linearity and hysteresis (prime grade)(5) (13)– – ±0.2 ±0.1 ±1.0 ±0.25 % FSO% FSO Temperature effect on span, 0 °C to 50 °C [32 °F to 122 °F] (6)Temperature effect on span, 0 °C to 50 °C [32 °F to 122 °F] (6)(prime grade) – – ±0.4 ±0.4 ±2.0 ±1.0 % FSO% FSOTemperature effect on offset 0, °C to 50 °C [32 °F to 122 °F] (6)Temperature effect on offset 0, °C to 50 °C [32 °F to 122 °F] (6) (prime grade)– – ±0.2 ±0.2 ±1.0 ±0.5 mVmV Repeatability (7)– ±0.2 ±0.5 % FSOInput resistance (8)– 4.0 – kOhmOutput resistance (9)– 4.0 – kOhmCommon mode voltage (10)1.5 3.0 5.0 VdcResponse time (11)– 100 – µsLong term stability of offset and span (12)– ±0.1 – mV Notes:1. Full-Scale Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure.Full-Scale Span is ratiometric to the supply voltage.2. Maximum pressure above which causes permanent sensor failure.3. Reference conditions:• T A = 25 °C (unless otherwise noted).• Supply V S = 12 Vdc, Common Mode Line pressure = 0 psig.• Pressure applied toPort B. For absolute devices only, pressure is applied to Port A and the output polarity is reversed. 4. Maximum zero pressure offset for absolute devices is ±500 mV.5. Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasingpressure.6. Maximum error band of the offset voltage and the error band of the span, relative to the 25 °C [77 °F] reading.7. Maximum difference in output at any pressure within the operating pressure range and the temperature within 0 °C to 50 °C[32 °F to 122 °F] after:• 100 temperature cycles, 0 °C to 50 °C [32 °F to 122 °F]. • 1.0 million pressure cycles, 0 psi to full-scale span.8. Input resistance is the resistance between V S and ground.9. Output resistance is the resistance between the + and - outputs. 10. Common Mode voltage of the output arms for V S =12 Vdc.11. Response time for a 0 psi to Full-Scale Span pressure step change, 10% to 90% rise time. 12. Long term stability over a one-year period.13. Maximum combined linearity and hysteresis for the SDX05 prime grade is ±0.5%.Figure 1. Electrical ConnectionsFigure 2. Mounting Dimensions (For Reference Only. mm/[in])A2/G2 PackageA4 PackageD4 PackageWARNING PERSONAL INJURYDO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury.Failure to comply with these instructions could result in death or serious injury.WARNINGMISUSE OF DOCUMENTATION• The information presented in this product sheet is forreference only. Do not use this document as a product installation guide.• Complete installation, operation, and maintenanceinformation is provided in the instructions supplied with each product.Failure to comply with these instructions could result in death or serious injury.WARRANTY/REMEDYHoneywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’sstandard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your orderacknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those ofmerchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.SALES AND SERVICEHoneywell serves its customers through a worldwide network of sales offices, representatives and distributors. Forapplication assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or:E-mail: info.sc@Internet: /sensingPhone and Fax:While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Asia Pacific +65 6355-2828; +65 6445-3033 Fax Europe +44 (0) 1698 481481; +44 (0) 1698 481676 Fax Latin America +1-305-805-8188; +1-305-883-8257 Fax USA/Canada +1-800-537-6945; +1-815-235-6847+1-815-235-6545 FaxSpecifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.Sensing and Control Honeywell1985 Douglas Drive North Golden Valley, Minnesota 55422 /sensing 008103-3-EN IL50 GLO Printed in USA November 2008Copyright © 2008 Honeywell International Inc. All rights reserved.分销商库存信息:HONEYWELLSDX15D4SDX15A2SDX01G2 SDX100G2SDX01D4SDX05D4 SDX100A4SDX30D4SDX100D4 SDX30G2SDX15A4-A SDX15D4-A SDX15G2SDX30A2SDX15A4 SDX05G2SDX100A2SDX30A4 SDX15G2-A SDX15A2-A SDX100G2-A SDX01G2-A SDX05G2-A SDX05D4-A。
9070T150D1产品数据表说明书
9070T150D1Industrial Control TransformersProduct Description PRODUCT DESCRIPTIONControl power transformers from Schneider Electric set the industry standard for design innovation and performance. They are designed with low impedance windings for excellent voltage regulation, and can accomodate the high inrush current associated with contactors, starters, solenoids, and relays.A variety of designs are available to meet the diverse needs of panel builders and machinery OEMs. The versatility of our control transformer line offers unparalleled options for design engineers. We also have one of the most extensive offering of custom products with no minimum order requirements.We have a national network of distributors to ensure prompt delivery, including industry leading delivery on custom products. In most cases, we can design, manufacture, and ship a custom unit in two weeks or less.The Global Product Offering—Type TType T is our most popular and complete line of control transformers. It comes with unmatched design innovations for top performance and is manufactured using the most advanced insulating materials. The Type T control transformer is the best choice if size and cost are of concern.The Exceptional Regulation Offering —Type EOConstructed with traditional materials and manufacturing processes, Type EO transformers are UL and CSA Component Recognized. Units are designed for 55°C rise. All units are 60HZ rated, withde-rated VA levels for 50HZ.Transformers with Fuse Block Protection—Types TF and EOFWe offer both product lines with factory installed overcurrent protection fuse blocks.Type TF and EOF transformers consist of two primary fuse blocks and one secondary fuse block, a configuration that meets the majority of overcurrent needs by panel builders and machinery OEMs. Since the fuse blocks are pre-wired and mounted on top of the transformer, the Type TF and EOF transformers have the same footprint as the Type T and Type EO units, respectively. This design frees up space normally used for separate fuse blocksWe also have an extensive fuse block offering for custom applications. See the overcurrent section of this catalog for full details.Leaded Control Transformer LineSchneider Electric offers transformers with internally pre-wired 24-inch primary and secondary leads, instead of terminal boards, to make installation easier and faster for many applications. These are only available for single voltage primary and single voltage secondary applications.MultiTapSchneider Electric offers Type T and Type EO transformers in the MultiTap version. The MultiTap control transformer was designed to respond to the increased need for voltage and stock flexibility. It combines multiple primary voltages with one or more secondary voltages, all in a single transfomer. The most flexible MultiTap voltage is the Universal, available on the Type T product line only. It allows for standard primary voltages of 208 to 600V and 110, 115, or 120V secondary voltages.Industrial Control TransformersType T TransformersTYPE T TRANSFORMERSThe Type T units are designed for the global market and are the best choice when size and cost are of concern. This is our most popular and complete offering of industrial control transformers. The following features are included:•50/60 Hz rated•Customer installed accessories (Finger-Safe covers, fuse blocks, fuse clips)•Type T transformers are designed with various temperature classes:—25–150 VA with a 55° C temperature rise, 105° C insulation —200–350 VA with a 80° C temperature rise, 130° C insulation —500–5000 VA with a 115° C temperature rise, 180° C insulationSchneider Electric manufactures a wide variety of voltage combinations for control transformers. The voltage combinations are expressed as “Voltage Codes”, and are embedded within the catalog number of the transformer. Standard codes are listed. If the voltage combination you need is not listed, please call your Schneider Electric distributor for assistance.CE MarkingIndustrial control transformers (ICTs) entering the European Union (EU) after January 1, 1997 are required by EU standards to have CE marking or Declaration of Conformity to CE. EU documentation requires compliance with specification EN 61 558 of the Low Voltage Directive. Type T ICTs from Schneider Electric comply with this specification and are third party tested to T ÜV standards, which adhere to, and are accepted by, EU standards. A Declaration of Conformity for all Type T units is available upon request.Because of different overload criteria in the CE specification,Schneider Elecric dual rates these transformers for UL VA, cUL VA, CSA VA, NOM VA and CE VA ratings (see “Type T VA Ratings” table). Because they are widely used with control circuit panels, ICTs are also required to comply with EN 60 204 and EN 61 558 in these applications. The Type T transformer line complies with EN 60 204 when Fingersafe ® covers are installed.For more information regarding CE marking, please contact your local Schneider Electric field sales office.Type T VA RatingsUL, cUL, CSA and NOM VA RatingCEVA Rating252550507575100100150150200200250160300200350250500300750500100063015001000200015003000200050003000Type T ListingsListingFileVA RangeUL E61239, Guide XPTQ225–5000cUL E612391500–5000CSALR37055, Guide 184-N-9025–1000EN947923, EN 61 558/01.89 (TUV ref: 00941-RAG/sg E9371495E01)25–2009579078, EN 61 558/01.89 (TUV ref: 00941-RAG/sg E9471921E01)250–10009579078, EN 61 558/01.89 (TUV ref: 00941-RAG/sg E9471921.02E01)1500–3000Industrial Control TransformersType T Transformers120 Volt Control SecondaryVoltage and Connection OptionsVoltage CodeVoltagesConnectionsPrimary SecondaryPrimarySecondaryD1220 x 440230 x 460240 x 480110115120220/230/240 V:Connect to H1 and H4Jumper H1 with H3Jumper H2 with H4440/460/480 V:Connect to H1 and H4Jumper H2 with H3Connect to X1 and X2DimensionsVA CatalogNumberFigureAcc. KeyA BCEFSlotsULCEINmmINmmINmmINmmINmmINmm25259070T25D11I 3.0979 3.0076 2.5866 2.0051 2.50640.20 x 0.38 5 x 1050509070T50D11I 3.0979 3.0076 2.5866 2.0051 2.50640.20 x 0.38 5 x 1075759070T75D11I 3.3485 3.3886 2.8973 2.3861 2.81710.20 x 0.48 5 x 121001009070T100D11I 3.3485 3.3886 2.8973 2.3861 2.81710.20 x 0.48 5 x 121501509070T150D11I 3.5991 3.7595 3.2081 2.8873 3.13800.20 x 0.38 5 x 102002009070T200D11I 3.5991 3.7595 3.2081 2.8873 3.13800.20 x 0.38 5 x 102501609070T250D12I 5.30135 3.7595 3.2182 2.8873 3.13800.20 x 0.38 5 x 103002009070T300D12I 4.74120 4.50114 3.8498 2.5665 3.75950.20 x 0.38 5 x 103502509070T350D12I 5.11130 4.50114 3.8498 3.0076 3.75950.20 x 0.38 5 x 105003009070T500D12I 5.49139 4.50114 3.8498 3.5690 3.75950.20 x 0.38 5 x 107505009070T750D12I 5.61143 5.25133 4.51115 3.4387 4.381110.28 x 0.567 x 1410006309070T1000D12I 6.30160 5.25133 4.51115 4.31109 4.381110.28 x 0.567 x 14150010009070T1500D12I 5.921507.06179 6.17157 4.13105 5.811480.28 x 0.567 x 14200015009070T2000D12I 7.171827.06179 6.17157 4.56116 5.811480.28 x 0.567 x 14300020009070T3000D13I 7.241849.002298.75222 4.631187.631940.44 x 1.1311 x 29500030009070T5000D13I9.152329.002298.752226.561677.631940.44 x 1.1311 x 2914T R A N S F O R M E R SIndustrial ControlClass 9070 / Refer to Catalogs 9070CT9901, 7400CT9601Square D ® Type T and MultiTap™ TransformersType T transformers are designed with low impedance windings forexcellent voltage regulation and can accommodate the high inrush current associated with contactors, starters, solenoids, and relays. As the most popular and complete line of control transformers with unmatched design innovations for top performance, Type Ts are manufactured using the most advanced insulating materials and are the best choice if size and cost are of concern. It is available in the MultiTap version, designed to respond to the increased need for voltage and stock flexibility. It combines multiple primary voltages with one or more secondary voltages, all in a single transformer.VAVA Catalog No.$ PriceH W D W e i g h t (l b s )U L /C S A /N O MCEin (mm)in (mm)in (mm)Primary 240 x 480 Secondary 120; Primary 230 x 460 Secondary 115; or Primary 220 x 440Secondary 11025259070T25D174.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.550509070T50D177.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.575759070T75D192.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D1103.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D1110.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D1136.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D1159.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D1176.00 3.80 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D1187.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D1233.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D1322.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D1390.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D1558.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D1678.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D1941.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D11582.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0Primary 208 Secondary 12050509070T50D390.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.575759070T75D3108.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D3121.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D3153.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D3195.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D3242.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D3248.00 3.80 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D3288.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D3314.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D3443.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D3558.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D3780.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D3905.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D31276.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D32010.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0Primary 600 Secondary 120; Primary 575 Secondary 115; or Primary 550 Secondary 11050509070T50D590.00 2.58 (65.5) 3 (76.2) 3.09 (78.5) 2.575759070T75D5108.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D5121.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D5153.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D5195.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D5242.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D5248.00 3.80 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D5288.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D5314.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D5443.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D5558.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D5780.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D5905.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D51276.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D52010.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0Primary 120 Secondary 120; Primary 115 Secondary 115; or Primary 110 Secondary 11050509070T50D24312.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.575759070T75D24324.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D24326.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D24348.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D24475.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D24477.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D24481.00 3.8 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D24483.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D24498.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D24560.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D24594.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D24717.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D24929.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D241463.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D242010.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0Primary 277 Secondary 120Primary 277 Secondary 120 (continued)2002009070T200D4195.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D4242.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D4248.00 3.80 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D4288.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D4314.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D4443.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D4558.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D4780.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D4905.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D41276.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D42010.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0VA VA Catalog No.$ PriceHW D W e i g h t (l b s )U L /C S A /N O MCEin (mm)in (mmin (mm)Primary 240 x 480 Secondary 120/240; Primary 230 x 460 Secondary 115/230; orPrimary 220 x 440 Secondary 110/22050509070T50D31125.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.575759070T75D31131.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D31138.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D31182.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D31235.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D31248.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D31290.00 3.80 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D31303.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D31339.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D31473.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D31558.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D31816.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D31905.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D311486.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D312010.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0Primary 120 x240 Secondary 120/240; Primary 115 x 230 Secondary 115/230; orPrimary 110 x 2200 Secondary 110/22050509070T50D55312.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.575759070T75D55324.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D55326.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D55348.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D55475.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D55477.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D55481.00 3.80 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D55483.00 3.80 (96.5) 4.50(114.3) 5.09 (129.3)10.55003009070T500D55498.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D55560.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D55594.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D55856.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D55929.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D551588.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D552010.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0Primary 240 X 480 Secondary 24/120 (24 V limited to 20% Capacity)50509070T50D1590.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.575759070T75D15108.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D15138.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D15153.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D15195.00 3.2 0(81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D15248.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D15290.00 3.80 (96.5) 4.50 9114.3) 4.70 (119.4)8.53502509070T350D15303.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D15339.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D15473.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D15558.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D15816.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D15905.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D151486.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D152010.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0Primary 480 Secondary 24050509070T50D1290.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.575759070T75D12324.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D12121.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D12153.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D12195.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.20) 5.52501609070T250D12242.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D12248.00 3.80 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D12288.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D12314.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D12443.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D12558.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D12780.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D12905.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0VA VA Catalog No.$ PriceH W DW e i g h t (l b s )U L /C S A /N O MCEin (mm)in (mm)in (mm)9070T150D1。
TCL150DA2-W中文资料
ACCESSORIESLMSHELF = Mounting Shelf 300-450W MXSHELF = Mounting Shelf 72-200WOrdering InformationSERIES DC WATTAGE HEADS HEADS OPTIONS 1CCL = 6 Volt 6 Volt6 Volt3 = Three A = Ammeter 2TCL = 12 Volt75 = 75 Watts DY = 8 Watt, Tungsten 2 = Two ACF1 = 120 VAC Fuse 100 = 100 Watts DA = 18 Watt, Tungsten 1 = OneACF2 = 277 VAC Fuse 150 = 150 Watts DL = 25 Watt, Tungsten ACP1 = 120 VAC Power Switch 225 = 225 WattsDC = 30 Watt, Tungsten ACP2 = 277 VAC Power Switch AD = ACCU-TEST Self-Diagnostics 12 Volt (Includes standard voltmeter)12 VoltADAL = ACCU-TEST with Alarm150 = 150 Watt DNY = 12 Watt, Tungsten ADTD = ACCU-TEST with Time Delay 3200 = 200 Watt DE = 28 Watt, Tungsten DCP = DC Power Switch300 = 300 Watt DK = 25 Watt, Tungsten EX = Special Input Transformer (Specify voltage and frequency)450 = 450 WattDG = 30 Watt, TungstenTD1 = 120 VAC Time Delay 3TTD2 = 277 VAC Time Delay 3(Suggested lamp heads listedV = Voltmeter 2above. Refer to the Accessories Section for W = White Housingadditional lamp head choices.)CCL15016.0”(40.6 cm)TCL300, TCL4506.0”(15.2 cm)7.6”(19.3 cm)12.0”(30.5 cm)27.0”(12.7 cm)6.0”(15.2 cm)7.6”(19.3 cm)12.0”(30.5 cm)Notes:1) Some option combinations may impact UL list-ing. consult factory for specifics.2) Not available witj AD, ADAL, or ADTD options.3) 15 minute delay.元器件交易网Housing18 gauge steel housing with a tan epoxy powder coat finish.Knockouts provided for mounting up to three lamp heads.The suggested lamp head is the “D” Series round sealed beam Par 36 tungsten. To order lamp heads other than the suggested “D” head, refer to Chloride Accessories Section..Suggested SpecificationFurnish and install Chloride Systems emergency lighting unit model ________. The unit shall be constructed to meet Underwriter’s Laboratories, Inc. Standard #924and the National Electrical Code (NEC).INSTALLATION AND OPERATION -Unit shall be easily field connected to a 120 or 277 VAC, 60 hertz, unswitched power source. Installation must comply with the NEC as well as other applicable codes. Upon utility power failure or brownout, the unit shall automatically transfer to battery power and maintain the required illumina-tion level for a minimum period of 90 minutes. Upon restoration of utility power, the charger shall restore the battery to full charge within UL 924 requirements follow-ing a rated discharge of not more than 90 minutes.CHARGER -Product shall utilize a fully automatic, voltage regulated, two-rate current limited solid-state charger. The charging system shall maintain the battery at full capacity without the need for periodic exercising or equalization. The following features shall be standard: Low voltage disconnect (LVD), brownout protection and AC lockout.BATTERY -The battery shall be a low maintenance, free electrolyte, wet cell, lead calcium battery. The lead calcium battery shall provide trouble-free operation in temperatures up to 85°F (30°C).HOUSING -The unit housing shall be constructed of 18 gauge steel with a tan epoxy powder coat finish.Chloride SystemsISO8C1063R49/02 IH272 West Stag Park Service Road •Burgaw NC 28425Telephone: (910) 259 1000 •Facsimile: (800) 258 Lamp Head Photometrics(For DL, suggested head for CCL)(For DK, suggested head for TCL)Vertical203050100Up 2010feet 010Down 20.2.1406070.31.5Horizontal203050100Left 2010feet 010Right 20.2.1406070.31.5203050100Up 2010feet 010Down 20Photometric No. 3406070801.3.2.1.5Horizontal203050100Left 3010feet 01020Right 301.3.2.120.540607080。
735D157X06R3A2中文资料
APPLICATIONS
• Designed specifically for the severe operating environment of aerospace applications, this capacitor was developed under partial sponsorship of the Marshall Space Flight Center, National Aeronautics and Space Administration. To meet aerospace requirements, the capacitors have a high resistance to damage from shock and vibration.
A CASE CODE See Table of Dimensions.
2 STYLE NUMBER 0 = Bare case. 2 = Outer plastic film insulation. 6 = High temperature film insulation (above + 125°C).
46
For technical questions, contact eurowettant@
Document Number: 40053 Revision 17-Oct-03
元器件交易网
Hale Waihona Puke 735D, 735DE, CT79 (CECC 30202)
• For - 55°C to + 200°C operation • All tantalum case • Glass to tantalum hermetic seal • Low ESR • High CV per unit volume • Extremely low leakage current • High permissible ripple current • 3 volts reverse voltage capability
台科技 SMD Power Inductor TMPA1265SP-Series(N)-D 说明书
ECN HISTORY LISTREV DATE DESCRIPTION APPROVED CHECKED DRAWN 1.018/06/20新發行羅宜春梁周虎許靜備注B:Dimension BxC.C:Type Standard.D:Inductance R10=0.1uh，1R0=1.0uh，100=10uh，101=100uh，102=1000uh. E:Inductance Tolerance K=±10%，L=±15%，M=±20%，N=±25%，Y=±30%F:Code Marking:Black.100and1536(15YY,36WW,follow production date).5.Specification1.Test frequency:Ls:100KHz/1.0V.2.All test data referenced to25℃ambient.3.Testing Instrument(or equ):L:HP4284A,CH11025,CH3302,CH1320,CH1320S LCR METER/Rdc:CH16502,Agilent33420A MICRO OHMMETER.4.Heat Rated Current(Irms)will cause the coil temperature rise approximatelyΔT of40℃5.Saturation Current(Isat)will cause L0to drop approximately30%.6.The part temperature(ambient+temp rise)should not exceed125℃under worst case operating conditions.Circuit design,component,PCB trace size andthickness,airflow and other cooling provisions all affect the part temperature.Part temperature should be verified in the end application.7.Special inquiries besides the above common used types can be met on your requirement.6.Material List7.Reliability and Test ConditionItemPerformanceTest ConditionOperating temperature-40~+125℃(Including self-temperature rise)Storage temperature1.-10~+40℃,50~60%RH (Product with taping )2.-40~+125℃(on board)Electrical Performance TestInductanceRefer to standard electrical characteristics list.HP4284A,CH11025,CH3302,CH1320,CH1320S LCR Meter.DCRCH16502,Agilent33420A Micro-Ohm Meter.Saturation Current (Isat)Approximately △L30%.Saturation DC Current (Isat)will cause L0to drop △L(%)Heat Rated Current (Irms)Approximately △T40℃Heat Rated Current (Irms)will cause the coil temperature rise △T(℃).1.Applied the allowed DC current2.Temperature measured by digital surface thermometerReliability TestLife TestAppearance ：No damage.Impedance ：within ±15%of initial value Inductance ：within ±10%of initial valueQ ：Shall not exceed the specification value.RDC ：within ±15%of initial value and shall not exceed the specification valuePreconditioning:Run through IR reflow for 2times.(IPC/JEDECJ-STD-020DClassification Reflow Profiles)Temperature ：125±2℃(Inductor)Applied current ：rated current Duration ：1000±12hrsMeasured at room temperature after placing for 24±2hrs.Load HumidityPreconditioning:Run through IR reflow for 2times.(IPC/JEDECJ-STD-020DClassification Reflow Profiles)Humidity ：85±2﹪R.H,Temperature ：85℃±2℃Duration ：1000hrs Min.with 100%rated currentMeasured at room temperature after placing for 24±2hrs.Moisture ResistancePreconditioning:Run through IR reflow for 2times.(IPC/JEDECJ-STD-020DClassification Reflow Profiles)1.Baked at50℃for 25hrs,measured at room temperature after placing for 4hrs.2.Raise temperature to 65±2℃90-100%RH in 2.5hrs,and keep 3hours,cool down to 25℃in 2.5hrs.3.Raise temperature to 65±2℃90-100%RH in 2.5hrs,and keep 3hours,cool down to 25℃in2.5hrs,keep at 25℃for 2hrs then keep at -10℃for 3hrs4.Keep at 25℃80-100%RH for 15min and vibrate at the frequency of 10to 55Hz to 10Hz,measure at room temperature after placing for 1~2hrs.Thermal shockPreconditioning:Run through IR reflow for 2times.(IPC/JEDECJ-STD-020DClassification Reflow Profiles)Condition for 1cycleStep1：-40±2℃30±5min Step2：25±2℃≦0.5minStep3：125±2℃30±5minNumber of cycles ：500Measured at room fempraturc after placing for 24±2hrs.VibrationPreconditioning:Run through IR reflow for 2times.(IPC/JEDECJ-STD-020DClassification Reflow Profiles)Oscillation Frequency:10～2K ～10Hz for 20minutes Equipment ：Vibration checker Total Amplitude:1.52mm±10%Testing Time :12hours(20minutes,12cycles each of 3orientations)。
SD6855 6 LED驱动原边控制开关电源说明书
杭州士兰微电子股份有限公司
Http: //
版本号：0.2 2010.11.01 共7页 第7页
IPK ；
ISP 为次级线圈的峰值电流，IPK 为原级线圈的峰值电流，n 为原次级线圈的匝比。 因此，在峰值电流恒定的条件下，只需要保持 TOFF1＝TOFF2＋TON 即可实现输出的恒流。
杭州士兰微电子股份有限公司
Http: //
版本号：0.2 2010.11Fra bibliotek01 共7页 第4页
版本号：0.2 2010.11.01 共7页 第2页
SD6855/6 说明书
极限参数（除非特殊说明， Tamb=25°C）
参
数
供电电压
内部电源电压
FB输入电压
其他输入电压
输入电流
工作结温
工作温度
贮存温度
ESD（人体模式）
符号 VCC VREF5V VFB VIN
IIN TJ Tamb TSTG ESD
关断阈值电压
内部供电电源
反馈部分
使能开启电压
过压保护电压
环路开路保护电压
动态特性部分
前沿消隐时间
过压保护恢复时间
限流部分
峰值电流检测阈值
过温保护部分
过热检测
过热迟滞
符号
测试条件
IST IOP VST VSP VREF5V
VCC =14V
VEN VOVP VBLANK
TLEB TOVP
VPK
Tsd Tsdhys
Http: //
版本号：0.2 2010.11.01 共7页 第3页
SD6855/6 说明书
功能描述
SD6855/6是离线式高端开关电源控制器。通过检测变压器原级线圈的导通时间TON、副边线圈放电的时 间TOFF1和衰减振荡的时间TOFF2，来实现输出恒流。
东方机电设备D-系列产品说明书
IntroductionEZSAccessories InstallationEZC EZHC EZHP Accessories Installation DRL Accessories Installation DG Accessories InstallationMotorized Linear SlidesMotorized CylindersCompact Linear Actuators Hollow Rotary ActuatorsConnection and Operation■Names and Functions of Driver Parts●Power Input ConnectorMotorConnector□2□4□5□1□3Tables of each product settings Page ➜ D-154●With the high-resolution motor, the resolution is one-half the values specified below.●With the high-resolution motor, the resolution is one-half the values specified below.Notes:The resolutions are theoretical values.●The resolution is calculated by dividing the base resolution by the number of microstep.●The numbers of microsteps that can be specified by the●"Resolution Select" signal are limited to those selected in resolution 1 or resolution 2. Do not change the●"Resolution Select" signal input or resolution select switch while the actuator is operating. It may cause malfunction.IntroductionEZSAccessories Installation EZC EZHC EZHP Accessories Installation DRL Accessories Installation DG Accessories InstallationMotorized Linear SlidesMotorized Cylinders Compact Linear Actuators Hollow Rotary ActuatorsPower Supply◇Use a power supply that can supply sufficient input current.When power supply capacity is insufficient, a decrease in actuator output can cause the following malfunctions:Actuator does not move properly at high-speed (insufficient thrust). ●Slow actuator startup and stopping●C onnecting the Electromagnetic Brake to ◇Power SupplyConnect the red/white lead from the actuator to the ●+24 VDC terminal on the DC power supply and the black/white lead to the GND terminal. (The electromagnetic brake leads have polarity. The electromagnetic brake will not operate if the leads are connected in reverse polarity.)For the electromagnetic brake, use a power supply of 24 VDC ●±5%, 0.1 A or more for DRL42, or 24 VDC ±5%, 0.3 A or more for DRL60.To connect the electromagnetic brake to the DC power supply, use a ●shielded cable of AWG24 or thicker and keep the wiring distance to a minimum. Be sure to use the supplied surge suppressor to protect switch contact and suppress noise.Notes on Wiring◇Use twisted-pair wires of AWG24 to 22 and 2 m (6.6 ft.) ● or less in length for the signal lines.Note that as the length of the pulse signal line increases, the maximum ●transmission frequency decreases. Technical reference ➜ F-67Use wires of AWG22 for the power supply lines.●When assembling the connector, use the hand-operated crimp tool or the crimped driver lead wire set (sold separately). The crimp tool is not provided with the package. It must be purchased separately.Signal lines should be kept at least 2 cm (0.79 in.) away from power lines ●(power supply lines and motor lines). Do not wire the signal lines with the power lines in the same duct or bundle them together.Extension of the motor leads should be within 10 m (32.8 ft.).●If noise generated by the wiring and layout of motor cables and/or power ●cables causes a problem, try shielding the cables or insert ferrite cores.Incorrect connection of DC power input will lead to driver damage. Make ●sure that the polarity is correct before turning the power on.Connection Diagram●DriverController Input/Output Signal Connection◇Keep the input signal V ●0 between 5 VDC and 24 VDC.When V 0 is equal to 5 VDC, the external resistor R 1 is not necessary. When V 0 is above 5 VDC, connect R 1 to keep the current between 10 mA and 20 mA.Example: When V 0 is 24 VDC R 1: 1.5 to 2.2 k Ω, 0.5 W or moreKeep the output signal voltage V ●0 between 5 VDC and 24 VDC, current 10 mA or less. When V 0 is above 10 mA, connect R 2 to keep the current 10 mA or less.Description of Input/Output Signals●Pulse (CW) and Rotation Direction (CCW) Input SignalInput Circuit and Sample Connection◇Notes:Keep the input signal voltage V ●0 between 5 VDC and 24 VDC.When V ●0 is equal to 5 VDC, the external resistor R 1 is not necessary. When V 0 is above 5 VDC, connect R 1 to keep the current between 10 mA and 20 mA.Pulse Waveform Characteristics◇ON ON Pulse Input SignalRotation Direction Input Signal 2Pulse Duty: 50% and belowThe shaded area indicates when the photocoupler diode is ON. The actuator moves when the ✽photocoupler state changes from ON to OFF.The minimum interval time when changing rotation direction 10 ●μs is shown as a responsetime of circuit. This value varies greatly depending on the actuator type and load inertia.Pulse Input Mode ◇1-Pulse Input Mode●The 1-pulse input mode uses "Pulse" and "Rotation Direction" signals. When the "Pulse" input is switched from ON to OFF while the "Rotation Direction" input is ON, the screw shaft moves one step forward. When the "Pulse" input is switched from ON to OFF while the "Rotation Direction" input is OFF , the screw shaft moves onestep backward.ON OFFON OFFMovement of the Screw Shaft Pulse InputRotation Direction Backward DirectionForward Direction 2-Pulse Input Mode●The 2-pulse input mode uses "CW" and "CCW" pulse signals.When the "CW" input is switched from ON to OFF , the screw shaft moves one step forward. When the "CCW" input is switched from ON to OFF , the screw shaft moves one step backward.CW Input CCW InputScrew ShaftON ON All Windings Off (A.W.OFF)/Resolution Select (C/S)/Automatic Current Cutback Release (C.D.INH) Input SignalInput Circuit and Sample Connection◇Note:Keep the input signal voltage V ●0 between 5 VDC and 24 VDC. When V 0 is equal to 5 VDC, the external resistor R 1 is not necessary. When V 0 is above 5 VDC, connect R 1 to keep the current between 10 mA and 20 mA.All Windings Off (A.W.OFF) Input Signal ◇Pin No.⑤, ⑥This signal is used when moving the screw shaft for manual ●positioning.When the "All Windings Off" input is turned "ON," the motor ●current turns off and the actuator loses its holding torque.When the "All Windings Off" input is turned "OFF ," the motor ●current turns on and the actuator regains its holding torque.ON OFFAll Windings Off SignalMotor Current Motor Holding TorqueNote:When operating the actuator, this switch must be "OFF."●R esolution Select (C/S) Input Signal ◇Pin No.⑦,⑧This signal is used to switch between two resolutions set by ●resolution setting switch (DATA1, DATA2). When the "Resolution Select" input is in the "photocoupler OFF" state, the resolution set by resolution setting switch DATA1 is selected. When the "Resolution Select" input is in the "photocoupler ON" state, the resolution set by resolution setting switch DATA2 is selected.Example: C hanging the resolution from 0.0004 mm (0.000016 in.)(10 microsteps/step) to 0.004 mm (0.00016 in.) (1 microsteps/step) (DRL42P )CW PulseActuatorResolution Select Signal (DATA1)(DATA2)10 Pulses1 PulseON OFFA utomatic Current Cutback Release (C.D.INH) Input Signal ◇Pin No.⑨, ⑩Turning the "Automatic Current Cutback Release" input "ON" will ●disable the automatic current cutback function when the actuator is at standstill. Turning the "Automatic Current Cutback Release" input "OFF" will enable the automatic current cutback function. When the automatic current cutback function is enabled, the output current to the motor will be automatically reduced within approximately 0.1 second after the pulse input is stopped, thus suppressing heat generation from the motor and driver.IntroductionEZSAccessories Installation EZC EZHC EZHP Accessories Installation DRL Accessories Installation DG Accessories InstallationMotorized Linear SlidesMotorized Cylinders Compact Linear Actuators Hollow Rotary ActuatorsExcitation Timing (TIM.) Output SignalOutput Circuit and Sample Connection◇Note:Keep the output signal voltage V ●0 between 5 VDC and 24 VDC, current 10 mA or less.When V 0 is above 10 mA, connect the external resistor R 2 as shown in the figure to keep the current 10 mA or less.This signal is used for precise home detection, etc.●The "Excitation Timing" output comes on every particular amount Excitation Timing OutputON OFFMovement of the Screw Shaft Timing Chart●The shaded section indicates that the photocoupler is on.ActuatorDriver Power Input 2-Pulse Input Mode 1-Pulse Input ModeRotation Direction Input SignalPulse Input Signal CW Pulse Input SignalCCW Pulse Input SignalAll Windings Off Input Signal Resolution Select Input SignalON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFFElectromagnetic Brake Power InputONOFF ✽51 ✽ The minimum switching time to change rotation direction (1-pulse input mode), and switching time to change CW, CCW pulse (2-pulse input mode) 10 μs is shown as a response time of circuit.The actuator may need more time.2 ✽ Depends on load inertia, load torque and starting frequency.3 ✽ Never input a pulse signal immediately after switching the "All Windings Off" signal to the "photocoupler OFF" state. The actuator may not start.4 ✽ Wait at least five seconds before turning on the power again.5 ✽ Only for electromagnetic brake type。
达塔数据盘型PS6600WC商品说明书
Structure
IP66F, IP67F, UL 50/50E,Type 1, Type 4X (indoor use only),Type 12,Type 13 NOTE:On the front panel when properly installed in an enclosure.
Weight
Voltage Drop
5 ms or less
20 ms or less
5 ms or less
20 ms or less
Power Consumption*4
Panel Unit Only: 73 W When power is not supplied to external devices (Max 138 W) Box Unit Only: 56 W When power is not supplied to external devices (Max 121 W)
Projected capacitive (multi-touch)
261.12 x 163.2 mm (10.28 x 6.43 in)
White LED (not user replaceable. Please contact customer support.)
50,000 hours or more (continuous operation at 25 °C [77 °F] before backlight brightness decreases to 25%)
260-pin SODIMM socket x 2, DDR4-2133 (Up to 16 GB/socket, up to 32 GB for 2 sockets)
Intel® UHD Graphics 620 (built in CPU)
6850 系列控制器用户手册说明书
前言重要信息 (5)仪器概述 (5)控制器元件 (6)屏幕 (6)键盘 (7)状态屏幕 (8)浏览屏幕 (9)例：配置色谱柱 (9)配置仪器 (13)查看当前配置 (14)调整显示对比度 (14)配置显示器和键盘 (14)设定时间和日期 (17)配置 RS-232 端口 (17)IP 地址设定 (18)控制模式 (18)绘制信号图 (21)绘制多重信号 (24)方法设计方法 (27)将激活方法另存为被命名的方法 (28)将激活方法另存为SERVICE方法 ..30重新存储缺省方法 (30)使用 PC卡 (30)从GC把一个方法拷贝到PC卡上 31从PC卡把一个方法拷贝到GC (31)从PC卡删除方法 (32)存储方法到PC卡的列表中 (32)在GC存储器中存取方法 (33)流量和压力控制氢气关闭 (35)柱关闭 (35)电子气路控制 (36)气体流量开和关 (36)解释流量和压力显示 (36)配置色谱柱 (37)柱模式 (39)柱模式对进样口模式 (39)初始柱流量或压力 (41)程序控制流量或压力 (42)辅助通道 (43)配置热辅助类型 (44)配置气路 (44)设定辅助温度和压力 (45)设定辅助温度梯度 (46)解决流量和压力故障 (47)自动化进样器控制 (50)设置进样器参数 (50)清洗参数 (51)针头深度 (51)停留时间 (52)溶剂参数 (52)序列参数 (54)输入阀参数值 (55)非序列操作 (55)控制序列 (55)启动序列 (55)暂停序列 (56)恢复一个被暂停的序列 (56)取消被暂停的序列分析 (56)停止序列 (56)运行表 (56)存储信号值(Store Signal Value)和信号归零值( Signal zero - value)事件 (59)时钟表 (60)分流/不分流进样口使用氢气 (62)选项 (62)进样口模式 (62)进样口和色谱柱 (63)进样口设定 (64)预运行 (65)设定进样口模式 (66)分流/不分流的术语 (66)压力脉冲模式 (67)设定一个压力脉冲 (68)分流模式 (69)使用配置柱的分流模式 (70)使用未配置柱分流模式 (70)不分流模式 (71)气路 (71)不分流模式进样 (72)配置柱用于不分流模式 (73)未配置柱用于不分流模式 (74)载气节省 (74)吹扫填充进样口使用氢气 (76)进样口和色谱柱控制 (76)进样口设定 (77)使用吹扫填充进样口 (78)填充柱和未配置毛细管柱 (79)配置了的毛细管柱 (79)程序升温汽化进样口使用氢气 (80)进样口模式 (80)进样口和色谱柱 (81)进样口设定 (81)停止行为 (83)设定进样口模式 (84)加热进样口 (84)PTV 的术语 (86)脉冲模式 (87)设定压力脉冲 (88)已经配置色谱柱时使用脉冲不分流模式 (89)在色谱柱没有配置时使用脉冲无分流模式 (90)已经配置色谱柱时使用脉冲分流模式 (92)在色谱柱没有配置时使用脉冲分流模式 (93)分流模式 (94)对温度要考虑的事项 (95)已配置了色谱柱使用分流模式 (95)在没有配置色谱柱时使用分流模式 97不分流模式 (98)流路图 (98)对温度要考虑的事项 (100)启动值 (101)已经配置色谱柱时使用不分流模式 (102)在没有配置色谱柱时使用无分流模式 (103)溶剂放空模式 (104)流动形式 (104)对温度、压力和流速要考虑的事项 (106)操作次序 (108)时间排列 (109)什么是开始运行? (110)已经配置色谱柱时使用溶剂放空模式 (110)未配置色谱柱使用溶剂放空模式 ..111大体积进样 (112)冷柱头进样口进样口温度 (120)冷气流（选项） (120)跟踪柱温箱模式 (121)温度程序模式 (121)设定值的范围 (121)操作冷柱头进样口 (122)热导检测器使用氢气 (124)操作条件 (124)TCD 参数 (124)尾吹气 (127)极性 (128)信号选择 (129)模拟输出 (131)使用TCD (132)火焰离子化检测器使用氢气 (134)检测器操作注意事项 (134)喷嘴 (135)电位计 (135)尾吹气 (136)尾吹气模式 (136)信号选择 (137)模拟输出 (139)自动再点火－点火补偿 (139)FID 参数 (140)使用 FID (142)微池电子捕获检测器线性 (144)检测器气体 (145)温度 (145)电位计 (145)模拟输出 (145)操作检测器 (146)柱箱柱箱性能 (148)柱箱安全措施 (148)柱箱设定 (149)建立恒温运行 (150)程序升温 (151)柱补偿 (154)建立柱补偿图 (155)应用柱补偿谱图 (156)火焰光度检测器(FPD)使用氢气 (158)概述 (158)线性 (159)使用点火补偿 (159)点燃火焰 (160)使用电位计 (161)信号选择 (162)数据速率 (163)使用快速出峰 (163)选择尾吹气模式 (164)加热器配置 (165)FPD 参数 (165)使用FPD (166)阀阀类型 (168)配置阀 (169)进样阀 (169)带进样阀的多通阀 (171)手动控制阀 (172)手动转动一个阀 (172)设定阀箱温度 (173)设置阀箱温度 (173)维修方法维修屏幕 (174)运行记录本 (174)故障诊断 (175)查看诊断状态 (175)泄漏检测（所有的进样口） (175)分流出口检测（仅用于分流/不分流进样口和PTV进样口） (178)喷嘴检测 (180)键盘检测 (182)校正 (182)维修 (186)使用早期维修反馈 (187)重新设定维修期限 (188)决定维修期限 (189)升级功能 (190)GC升级 (190)进样器固件升级 (191)控制器固件升级 (192)前言重要信息©安捷伦科技公司 1998, 1999, 2000, 2002, 2004版权所有，未经书面许可不得擅自复制、引用或翻译，符合版权法者例外。
SINAMICS G150 样本(中文)
C lo s e d -Io o p -c o n tr o l
D ia g n o s is
H e lp
ESC
OK
首先，选择所使用的电机类型 （技术数据符合标准 IEC 或 NEMA）。
Select Motortype ( IEC/ NEMA)
1 2 3
4
5
操作面板 1 通电指示灯 （绿色） 2 报警指示灯 （黄色） 3 故障指示灯 （红色） 4 数字键盘 5 键盘锁 6 显示 7 功能键 F1 - F5 8 本地 / 远程优先级的选择 9 驱动控制小键盘
1
变频调速柜
SINAMICS G150
■ 特性 （续）
• 结构紧凑，模块化设计，极易维护 • 无故障设计 • 易于连接，装配简单 • 调试快速，菜单提示，无需复杂参数化 • 舒适型图形化操作面板，操作简便，一目了然，测量值以纯
文本或准模拟条形图显示
质量
SINAMICS G150 变频调速柜是按最高质量标准和要求监造。 产品具有最大的可靠性、可用性和功能性。
A&D Mall 网址： /automation/mall
DA 12 DA 21.1 DA 22 DA 63 DA 65.10 M 11 SD 01 CA 01
SINAMICS G150 变频调速柜 订货样本 D 11
2004 年 6 月
本样本所及产品和系统 均为最高质量监造，获得 德国 DQS 认证，符合标 准 DIN EN ISO 9001。 DQS 认证为所有 EQ Net 获得国际认可。
110 kW - 560 kW (~800kW)
SINAMICS G150 变频调速柜，结构紧凑，模块化设计，维修 方便。
丰富的电气和机械选件，可使驱动系统优化用于各种应用。
至las Copco QAS 150 JD iT4 多功能液氯冷式六筒柴油发电机说明书
XAS185 KD T4F – Product Reference Standard Scope of Suppl yQAS 150 JD iT4Mobile GeneratorThe Atlas Copco QAS 150 JD iT4 generators are prime power, multi-voltage, sound attenuated, mobile generators. They are powered by a John Deere iT4 liquid-cooled, six cylinder diesel engine.The units consist of an alternator, diesel engine, cooling system, electrical distribution and control systems - all enclosed within asound attenuated enclosure fabricated from powder coated galvanealed steel.A broad range of undercarriage formats and options are available.Special attention has been given to the overall product quality, user friendliness, ease of serviceability, and economical operation to ensure best in class total cost of ownership.Available ModelsQAS 150 JD Multiple voltage – 150kVA prime power – John Deere engi ne Standard Features B enefits•Compact, sound attenuated, corrosion resistant,with single point lifting and 110% fluid containment•Extremely durable and environmentally sensitive,designed to be used for everything from the oilpatch to special event power•Available as a skid mounted unit with forklift pockets, or on adual axle trailer•Versatility, giving you the flexibility to match your machine tothe correct application•Heavy Duty alternator with AREP excitation and marine gradeprotection•Start-up power for the most demanding sites with 300% overload starting capabilities•Single side service with long run filters and 500 hour serviceintervals•Heavy duty oil, air and fuel filters extend the maintenanceinterval to 500 hours for reduced total cost of ownership•Reduces maintenance costs with long intervals easy access formechanics•Extremely reliable and durable John Deere 6068 •Proven engine platform with high reliability•Emergency Stop •External, recessed emergency stop for increased safety•Remote Start / Stop •Allows connection as a critical back-up unit via a 2 wire drycontact connection in the distribution panelTechnical Data 11 All ratings are at a reference condition of 0’ altitude and 20°C (72°F)2 Please see receptacle voltage configuration in Power Distribution section on page #53 Engine oil to meet CJ-4 (low ash oil)4 Please see “Derate Table” for altitude and temperature calculations on page #45 Cold start option comes with 120V block heater and 0W40 synthetic engine oil6 Measured in accordance with ISO 2151 under free field conditions @ 7m distance7 Engine and emissions require the use of Ultra Low Sulfur Diesel in accordance to ASTM-D975 Grade No.1-D S15 & No.2-D S15 8 Based on 90% volume of fuel tank GeneratorUnitsQAS 150 JDRated Prime Power 3Ø kW / kVA 120/150 Rated Standby Power 3Ø kW / kVA132/165 3Ø Power Factor0.8 3Ø Voltage In 480V Switch Position (Series Star w/ Neutral) V 480Y/277 Amp Capacity @ 480VA180 3Ø Voltage In 240-208V Switch Position (Parallel Star w/ Neutral)V 240Y/139 – 208Y/120 Amp Capacity @ 240V A 361 Amp Capacity @ 208V A 400 Rated Prime Power 1Ø kW / kVA83/83 1Ø Power Factor1.0 1Ø Voltage In 120-240V Switch Position (Zig-Zag) V 240/120 Amp Capacity @ 240V A 400 Amp Capacity @ 120V A400 x 2 Alternator (4 Pole, 12 Wire) Leroy SomerLSA 44.2 S7 ExcitationAREP Automatic Voltage Regulator (+/- 0.5%) Leroy SomerR438 Insulation Class H FrequencyHz 60 Main Breaker - Shunt TripA 400Power Distribution – Terminal Board 5 Wire (L1, L2, L3, N, Ground)Terminal Board Connections Bare Wire TerminalsMaximum Terminal Cable Size350MCMConvenience Receptacles 2 2 x NEMA 5-20R & 2 x 125/250V50A CS6364EngineUnitsQAS 150 JDModelJohn Deere6068HFG94 US EPA Family DJDXL06.8204 US EPA Tier Tier 4 InterimDisplacement L 6.8 Cylinders# 6Continuous Engine Power Output HP (kW) 183 (136.5) Gross Engine Power Output HP (kW) 201 (150) Rated Speed RPM 1800 Engine Control ECUAspirationTurbocharged Engine oil capacity 3 US Gal (L) 7.1 (27) Engine coolant capacityUS Gal (L) 8.7 (33) Maximum Ambient Temperature (@ Sea Level)4°F (°C) 122 (50)Minimum Starting T emperature (Without cold weather options)°F (°C) 14 (-10) Minimum Starting T emperature (With cold weather kit)5 °F (°C) -13 (-25) Electrical System (Negative Ground) V 12 Engine Alternator OutputA 90 Battery Capacity (Cold Cranking Amps)A 1100 Sound Pressure Level @ 23’(7 m) @ 75% Load 6 dB(A)72Fuel SystemUnitsQAS 150 JDFuel Consumption @ 25% load US Gal/hr (L/hr) 3.0 (11.2) Fuel Consumption @ 50% load US Gal/hr (L/hr) 4.7 (17.8) Fuel Consumption @ 75% load US Gal/hr (L/hr) 6.5 (24.6) Fuel Consumption @ 100% load US Gal/hr (L/hr)8.6 (32.6)Fuel TypeUltra Low Sulfur Diesel ONLY 7Fuel Tank CapacityUS Gal (L)219 (829) Fuel Autonomy @ 75% load Hr 30.3Dime nsi on sTrailer MountedSkid MountedWeight - Wet (ready to operate)UnitsQAS 150 JDTrailer Mounted lbs (Kg) 8541 (3874) Skid Mounted lbs (Kg)7484 (3395)DimensionsTrailer Mounted (L x W x H) Inches 191 x 94 x 92 Skid Mounted (L x W x H)Inches133 x 47 x 78Principle DataAlternatorThe Leroy Somer LSA alternators are designed for heavy duty continuous applications, with marine winding protection and Leroy Somer’s AREP excitation system.• AREP Excitation for superior motor starting capabilities • Marine grade (relative humidity >95%) protection • External multi-voltage selector switch (3 – position)• 4 pole brushless design with single bearing, Class H insulation and IP23 rating • Voltage regulation +/- 0.5%• Full Load acceptance of prime power ratingThe AREP system uses 2 independent auxiliary windings located in the main stator to send supply voltage to the AVR:• The voltage delivered by the first auxiliary winding H1 is proportional to the alternator output voltage (shunt characteristic).• The voltage delivered by the second auxiliary winding H3 is proportional to the current drawn by the alternator and is a function ofthe applied load (compound characteristic – booster effect).• The resulting phase-to-phase voltage supplies power to the AVR.This power supply to the AVR power circuit is independent of the voltage sensing measured on the alternator output terminals. Therefore, the excitation current delivered by the AVR to the alternator exciter is independent of any voltage distortions (harmonics) due to the load. The AREP system gives the alternator a high overload capacity (load impact or starting electric motors) and a short-circuit capability (300% - 10 s) in order to provide discriminating protection: the alternator with AREP excitation is shorter than the one with PMG excitation. It is particularly suitable for demanding applications.Performance @ Altitude and High Ambient ConditionsWhen using at altitude and high ambient conditions the engine and alternator will de-rate as per chart below.Temperature °C (°F)H eight m (Feet) 0 (32) 5 (41) 10 (50) 15 (59) 20 (68) 25 (77) 30 (86) 35 (95) 40 (104) 45 (113) 50 (122)0 100% 100% 100% 100% 100%100% 100% 100% 100% 95% 99% 500 (1640) 100% 100% 100% 100% 100% 100% 100% 100% 100% 95% 90% 1000 (3280) 100% 100% 100% 100% 100% 100% 100% 100% 100% 95% 90% 1500 (4921) 100% 100% 100% 100% 100% 100% 100% 100% 95% 95% 85% 2000 (6561) 95% 95% 95% 95% 95% 95% 95% 95% 95% 90% 85% 2500 (8202) 90% 90% 90% 90% 90% 90% 90% 90% 90% 85% 80% 3000 (9842) 90% 90% 90% 90% 90% 90% 90% 90% 90% 85% 80% 3500 (11,482) 85% 85% 85% 85% 85% 85% 85% 85% 85% 75% 75%4000 (13,123)85%85%85%85%85%85%85%85%85%75%75%Power DistributionThe main power is connected from the alternator through a 3 position voltage selector switch to the main power cubicle. The cubicle incorporates all power distribution, controls, sensing and protection devises.✓ 3 position Voltage Selector Switch (VSS)✓Current transformer x 3 (1 each leg)✓Single main breaker w/shunt trip✓Individual breakers for each receptacle✓Convenience receptacles located on outside of unit for easy access✓Terminal board for hard wiring✓Cam-Lock external quick connect (available as option)✓External emergency stop switch (recessed)✓Neutral bonded to Ground with a removable bonding link accessible in the control cubiclePlease refer to the chart below for power distribution and voltages. NOTE: All voltages below are subject to change, depending on set point of “Fine Voltage Adjustment” potentiometer and Voltage Selector Switch.•All voltages are adjustable with the “Fine Voltage Adjustment” potentiometer located on the control panel. Therefore voltage may be different then what is shown in the above table. All voltages should be verified before connection to the unit.ControllerThe QAS 150 comes equipped with an Atlas Copco Qc1002 control module. This is a fully diagnostic ECU controller with large 3” display, that is intuitive and easy to operate with all functions conveniently at your fingertips. The controller also manages the engine ECU operating system, and a number of safety warnings and shut downs on various parameters (listed below).The controller is powered by a main On/Off switch located next to unit.Atlas Copco Qc1002 Controller Functionality:•Home Pages✓Shows one line voltage and frequency of generator✓Shows fuel level✓Shows oil pressure✓Shows coolant temperature✓Shows battery voltage✓Shows service timer✓Shows RPM✓Shows DPF Level •Log List✓Event memory of last 20 alerts•Alarm ListGives view of active alarms •Parameters✓Enables connection to service port on engine✓Unit Type configuration✓Service timer reset (2 service timers)✓Unit of measure✓Language✓Stationary Regeneration (DPF)✓Over and under frequency alarm✓Over and under voltage alarm•Remote Start/Stop✓Automatic start stop via 2 wire dry contactconnection •Engine DM1 Page✓This page contains any active Diagnostic TroubleCodes that the engine ECU is currently generating.These alarms are conditions detected by theengine ECU and displayed on the DSE controller.EngineJohn DeereJohn Deere Interim Tier 4 Final, turbo charged, six-cylinder, liquid-cooled diesel engine provides ample power to operate thegenerator continuously at full-load.Meets all US EPA, CARB and Environment Canada exhaust legislations with Interim Tier 4 compliance. The engine utilizes a Diesel Oxidation Catalyst (DOC) to meet Interim Tier 4 emissions. All functionality of the engine is controlled automatically on the Atlas Copco Qc1002 controller.The engine has the capability to start the generator at 14°F (-10°C) with standard glow-plug aid. Cold start options are available for machine starting for down to -13°F (-25°C).The 219 Gal (829L) fuel tank is sufficiently sized to operate the unit at full-load cond itio n for long run times (see chart on page 2 forspecifications).The engine operates on a 12V negative ground electrical system with a 90A charging alternator.The cooling system is suitably designed for continuous operation in ambient conditions up to 122°F (50°C), with canopy door closed.Fuel SystemA large 219 US Gal (829L) steel fuel tank provides safe diesel storage while eliminating tank corrosion contaminants frombeing introduced to your fuel system. With integrated fuel water separator and filter, the system is designed to helpmaintain clean and trouble free diesel supply to the engine for reliable trouble free operation.✓Lockable diesel fill cap✓Fuel / Water separator✓Inline priming pump (w/ filter)✓Fuel pre-filter✓Fuel supply pump (w/ strainer)✓Fuel level sensor✓Low fuel shut down feature (programmable level)Scheduled maintenanceStandard equipped with filters sized and designed to allow 500 hour service intervals under normal operating conditions.Extended time between services reduces down time and total cost of ownership of the unit over its lifetime.•500 Hour Service Interval:✓Air filter✓Oil filter✓Fuel filter✓Fuel / water separatorNOTE: Site specific operating conditions such as; poor fuel quality and low load profile may require more frequent service intervals.Enclosure & FrameThe generator enclosure is designed for extreme applications to provide superior performance and reliability.The enclosure is fabricated from galvaneal coated steel which is powder coated for corrosion resistance. The enclosure and frame are fully sealed from the radiator to the back of the unit, providing a true 110% containment of all fluids.✓Galvanealed, powder coated enclosure✓Heavy duty base frame✓110% fluid containment✓Larger 219 gallon, steel fuel tank✓Superior level of rain ingress protection and design features✓Pad-lockable doors and fuel cap✓Engine fluid plumbed to exterior of frame for ease of service✓Central lifting point✓Sound dampening material and design to allow quiet operation at 71 dB(A)UndercarriageThe QAS 150 is available with two undercarriage alternatives, providing utmost flexibility in installation, site handling or towing. Both the skid frame and the trailer mount the same way and can be interchanged for versatility.•Trailer mounted:✓Dual axle trailer✓Available with hydraulic or electric brakes✓DOT/Federal MVSS 49CFR571 approved light package✓Adjustable height pintle hitch (3” lunette)✓15” Rims w/ ST225/75R15D Tires for trailer use✓Heavy Duty torsion axle✓Safety chains✓Screw jack leveling, with pad foot, 3,000 lbs static capacity✓Single point lifting structure✓D-Ring Tie down points x4•Skid mounted:✓Sub-frame skid with integrated forklift pockets✓Heavy duty design for use in extreme conditions✓Frame is ¼” wider then machine to reduce damage from forklifts✓Built-in locations for straps or chains to secure the unit for transport✓Single point lifting structureFactory Options Available•Dual axle trailer with hydraulic or electric brake package•Heavy duty skid with forklift pockets•Trailer stabilizer jacks•Trailer mounted tool box•Trailer spare tire•Battery charger (12V)•Battery isolation switch (lockable)•Cam-Lok quick connections (5 x 400A)•External fuel quick connects (3 way valve, located inside of enclosure for spill containment and protection)•CSA approval•MVT (Multi-Voltage Technology) 600V optionManufacturing & Environmental Standard sThe QAS 150 JD iT4 is manufactured following stringent ISO 9001 regulations, and by a fullyimplemented Environmental Management System fulfilling ISO 14001 require m ents.Attention has been given to ensure minimum negative impact to the environ ment.The QAS 150 JD iT4 meets all current US EPA, CARB and Environment Canada exhaust and noise emissiondirectives.Supplied Docu men t ationThe unit is delivered with documentation regarding:•Hard copies of the Atlas Copco Operators Safety and Instruction Manual, Atlas Copco Parts Book, John Deere Engine Manual and Parts book, in English as well as electronic copies available on request.•Warranty Registration card for engine and Atlas Copco Generators (Units must be registered upon receipt).Warranty Co verag eAtlas Copco Generator: Warrantied to be free from defects with regard to material and workmanship for the period of eighteen (18) months from date of shipment from the factory, or twelve (12) months from date of initial startup, whichever occurs first, without limitation of running hours.John Deere Engine: Warranty from John Deere. Unit must be registered directly with John Deere upon receipt to be eligible forwarranty. Failure to register warranty upon initial startup may cause warranty claim delays or rejection of claim by John Deere.John Deere Diesel Engines are warranted to be free from defects with regard to materials and workmanship for the period of twelve (12) months from the date of initial startup, without limitation in running hours, or the period of the twenty-four (24) months from the date of initial startup, prior to the accumulation of 2,000 running hours. Emission control components are warranted for 5 years or 3,000 hours.Leroy Somer Alternator: Warrantied to be free from defects with regard to material and workmanship for the period of twenty seven (27) months from date of shipment from the factory, or twenty four (24) months from date of initial startup or 10,000 hours, whichever occurs first.Extended Warranty Programs: Programs are available; please contact your local sales representative for more info.。
亚特顿115909Moeller系列MSC-D DOL电机启动器商品说明说明书
Eaton 115909Eaton Moeller® series MSC-D DOL starter, 380 V 400 V 415 V: 0.75 kW, Ir= 1.6 - 2.5 A, 230 V 50Hz/60Hz, ACGeneral specificationsEaton Moeller® series MSC-D DOL starter115909MSC-D-2,5-M7(230V50/60HZ)401508115649895 mm 180 mm 45 mm 0.584 kgCSA Class No.: 3211-24 CSA-C22.2 No. 14-10 ULUL File No.: E123500 VDE 0660CSA File No.: 012528UL Category Control No.: NKJH CSAUL60947-4-1A CEIEC/EN 60947-4-1Product NameCatalog Number Model CodeEANProduct Length/Depth Product Height Product Width Product Weight Certifications2.5 AIs the panel builder's responsibility. The specifications for the switchgear must be observed.0.75 kW230 - 415 V AC0 A230 VMeets the product standard's requirements.Is the panel builder's responsibility. The specifications for the switchgear must be observed.DIN railDoes not apply, since the entire switchgear needs to be evaluated.0 kW0 kWMeets the product standard's requirements.0 VShort-circuit release0Simple, flexible and safe! Distribution system for motor-starter combinationsSave time and space thanks to the new link module PKZM0-XDM32ME Motor Starters in System xStart - brochureProduct Range Catalog Switching and protecting motorsDA-DC-00004878.pdfDA-DC-00004910.pdfeaton-manual-motor-starters-motorstarter-msc-d-dol-starter-dimensions.epseaton-manual-motor-starters-mounting-msc-d-dol-starter-3d-drawing.eps eaton-general-ie-ready-dilm-contactor-standards.epsDA-CE-ETN.MSC-D-2,5-M7(230V50_60HZ)IL034038ZUIL034014ZUWIN-WIN with push-in technologyDA-CD-msc_d_bg1DA-CS-msc_d_bg1eaton-manual-motor-starters-device-msc-d-dol-starter-wiring-diagram.epsRated operational current for specified heat dissipation (In) 10.11 Short-circuit ratingRated operational power at AC-3, 380/400 V, 50 Hz Rated operational voltageRated conditional short-circuit current, type 1, 480 Y/277 V Rated control supply voltage (Us) at AC, 50 Hz - min10.4 Clearances and creepage distances10.12 Electromagnetic compatibilityMounting method10.2.5 LiftingRated power at 575 V, 60 Hz, 3-phaseRated power at 460 V, 60 Hz, 3-phase10.2.3.1 Verification of thermal stability of enclosures Rated control supply voltage (Us) at DC - minFitted with:Number of pilot lightsRated control supply voltage (Us) at AC, 50 Hz - max BrochuresCatalogsDeclarations of conformity DrawingseCAD modelInstallation instructions Installation videosmCAD modelWiring diagrams230 VCoordination type210.8 Connections for external conductorsIs the panel builder's responsibility.Coordination class (IEC 60947-4-3)Class 2Rated conditional short-circuit current, type 1, 600 Y/347 V0 APower consumption, sealing, 50 Hz1.4 CO, Coil in a cold state and 1.0 x UsAmbient operating temperature - max55 °CRated operational power at AC-3, 220/230 V, 50 Hz0.37 kWConnection to SmartWire-DTNoNumber of command positionsStatic heat dissipation, non-current-dependent Pvs1.4 WElectrical connection type of main circuitScrew connectionElectrical connection type for auxiliary- and control-current circuit Screw connectionRated control supply voltage (Us) at DC - max0 V10.9.3 Impulse withstand voltageIs the panel builder's responsibility.Ambient operating temperature - min-25 °C10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.ClassCLASS 10 A10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.10.9.4 Testing of enclosures made of insulating materialIs the panel builder's responsibility.10.3 Degree of protection of assembliesDoes not apply, since the entire switchgear needs to be evaluated.Heat dissipation per pole, current-dependent Pvid1.9 WActuating voltage230 V 50Hz/60HzVoltage typeACSwitching capacity (auxiliary contacts, general use)15 A, 600 V AC, (UL/CSA)1 A, 250 V DC, (UL/CSA)Overload release current setting - min1.6 AEquipment heat dissipation, current-dependent Pvid5.7 WHeat dissipation capacity Pdiss0 WRated operational current (Ie)1.9 ASuitable forAlso motors with efficiency class IE3Number of auxiliary contacts (normally closed contacts)Rated conditional short-circuit current (Iq), type 2, 380 V, 400 V, 415 V50000 APower consumption1.4 W10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effectsMeets the product standard's requirements.Overload release current setting - max2.5 A10.9.2 Power-frequency electric strengthIs the panel builder's responsibility.Overvoltage categoryIIIDegree of protectionIP20NEMA OtherPollution degree3Rated control supply voltage (Us) at AC, 60 Hz - min230 V10.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.Rated impulse withstand voltage (Uimp)6000 V ACConnectionScrew terminals10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.FunctionsTemperature compensated overload protectionRated conditional short-circuit current (Iq), type 2, 230 V 50000 ATypeStarter with Bi-Metal release10.2.2 Corrosion resistanceMeets the product standard's requirements.Eaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaMeets the product standard's requirements.Meets the product standard's requirements.38.8 A230 V2.5 A Direct starter1Max. 2000 mA600, AC operated (UL/CSA) P300, DC operated (UL/CSA)10.2.4 Resistance to ultra-violet (UV) radiation 10.2.7 InscriptionsShort-circuit release (Irm) - max Rated control supply voltage (Us) at AC, 60 Hz - max Rated operational current (Ie) at AC-3, 380 V, 400 V, 415 V Model Number of auxiliary contacts (normally open contacts)Altitude Switching capacity (auxiliary contacts, pilot duty)。
摩耶V2416A系列无风扇、振动保护计算机产品介绍说明书
V2416A SeriesCompact,fanless,vibration-proof computers for rolling stock applicationsFeatures and Benefits•Intel Celeron/Core i7processor•Two hot-swappable2.5-inch HDD or SSD storage expansion trays•Dual independent DVI-I displays•2Gigabit Ethernet ports with M12X-coded connectors•2CFast sockets for OS backup•M12A-coded power connector•Compliant with EN50121-4•Complies with all EN50155mandatory test items1•IEC61373certified for shock and vibration resistance•Ready-to-run Debian7,Windows Embedded Standard7,and Windows10Embedded IoT Enterprise2016LTSB platforms•-40to70°C wide-temperature models available•Supports SNMP-based system configuration,control,and monitoring(Windows only)CertificationsIntroductionThe V2416A Series embedded computers are based on the Intel3rd Gen processor and feature4RS-232/422/485serial ports,dual LAN ports,and 3USB2.0hosts.In addition,the V2416A computers provide dual DVI-I outputs and comply with the mandatory test items of the EN50155 standard,making them suitable for a variety of industrial applications.The CFast socket,SATA connectors,and USB sockets provide the V2416A computers with the reliability needed for industrial applications that require data buffering and storage expansion.Most importantly,the V2416A computers come with2hot-swappable storage trays for inserting additional storage media,such as hard disk or solid-state drives,and support hot swapping for convenient,fast,and easy storage replacement. Each storage tray has its own LED to indicate whether or not a storage module is plugged in.The V2416A Series computers come preinstalled with a choice of Linux Debian7or Windows Embedded Standard7to provide programmers with a familiar environment in which to develop sophisticated,bug-free application software at a low cost.1.This product is suitable for rolling stock railway applications,as defined by the EN50155standard.For a more detailed statement,click here:/doc/specs/EN_50155_Compliance.pdfAppearanceFront View Rear ViewSpecificationsComputerCPU V2416A-C2Series:Intel®Celeron®Processor1047UE(2M cache,1.40GHz)V2416A-C7Series:Intel®Core™i7-3517UE Processor(4M cache,up to2.80GHz) System Chipset Mobile Intel®HM65Express ChipsetGraphics Controller Intel®HD Graphics4000(integrated)System Memory Pre-installed4GB DDR3System Memory Slot SODIMM DDR3/DDR3L slot x1Supported OS Linux Debian7Windows Embedded Standard7(WS7E)32-bitWindows Embedded Standard7(WS7E)64-bitStorage Slot CFast slot x2Computer InterfaceEthernet Ports Auto-sensing10/100/1000Mbps ports(M12X-coded)x2Serial Ports RS-232/422/485ports x4,software selectable(DB9male)USB2.0USB2.0hosts x1,M12D-coded connectorUSB2.0hosts x2,type-A connectorsAudio Input/Output Line in x1,Line out x1,M12D-codedDigital Input DIs x6Digital Output DOs x2Video Input DVI-I x2,29-pin DVI-D connectors(female)Digital InputsIsolation3k VDCConnector Screw-fastened Euroblock terminalDry Contact On:short to GNDOff:openI/O Mode DISensor Type Dry contactWet Contact(NPN or PNP)Wet Contact(DI to COM)On:10to30VDCOff:0to3VDCDigital OutputsConnector Screw-fastened Euroblock terminalCurrent Rating200mA per channelI/O Type SinkVoltage24to40VDCLED IndicatorsSystem Power x1Storage x1Hot-swappable2LAN2per port(10/100/1000Mbps)Serial2per port(Tx,Rx)Serial InterfaceBaudrate50bps to921.6kbpsFlow Control RTS/CTS,XON/XOFF,ADDC®(automatic data direction control)for RS-485,RTSToggle(RS-232only)Isolation N/AParity None,Even,Odd,Space,MarkData Bits5,6,7,8Stop Bits1,1.5,2Serial SignalsRS-232TxD,RxD,RTS,CTS,DTR,DSR,DCD,GNDRS-422Tx+,Tx-,Rx+,Rx-,GNDRS-485-2w Data+,Data-,GNDRS-485-4w Tx+,Tx-,Rx+,Rx-,GNDPower ParametersInput Voltage12to48VDCPower Connector M12A-coded male connectorPower Consumption(Max.) 3.3A@12VDC0.82A@48VDCPower Consumption40W(max.)Physical CharacteristicsHousing AluminumIP Rating IP30Dimensions(with ears)250x86x154mm(9.84x3.38x6.06in)Dimensions(without ears)275x92x154mm(10.83x3.62x6.06in)Weight4,000g(8.98lb)Installation DIN-rail mounting(optional),Wall mounting(standard) Protection-CT models:PCB conformal coating Environmental LimitsOperating Temperature Standard Models:-25to55°C(-13to131°F)Wide Temp.Models:-40to70°C(-40to158°F) Storage Temperature(package included)-40to85°C(-40to185°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsEMC EN55032/24EMI CISPR32,FCC Part15B Class AEMS IEC61000-4-2ESD:Contact:6kV;Air:8kVIEC61000-4-3RS:80MHz to1GHz:20V/mIEC61000-4-4EFT:Power:2kV;Signal:2kVIEC61000-4-5Surge:Power:2kVIEC61000-4-6CS:10VIEC61000-4-8PFMFRailway EN50121-4,IEC60571Railway Fire Protection EN45545-2Safety EN60950-1,IEC60950-1Shock IEC60068-2-27,IEC61373,EN50155Vibration IEC60068-2-64,IEC61373,EN50155DeclarationGreen Product RoHS,CRoHS,WEEEMTBFTime332,173hrsStandards Telcordia(Bellcore),GBWarrantyWarranty Period3yearsDetails See /warrantyPackage ContentsDevice1x V2416A Series computerInstallation Kit8x screw,for storage installation2x storage key1x wall-mounting kit8x washer,for HDD/SSDDocumentation1x document and software CD1x quick installation guide1x warranty cardDimensionsOrdering InformationModel Name CPU Memory(Default)OS CFast(CTO)Backup CFast(CTO)Hot-SwappableSSD/HDD Tray(CTO)Operating Temp.ConformalCoatingV2416A-C2Celeron1047UE4GB or optional1(Optional)1(Optional)2(Optional)-25to55°C–V2416A-C2-T Celeron1047UE4GB or optional1(Optional)1(Optional)2(Optional)-40to70°C–V2416A-C2-CT-T Celeron1047UE4GB or optional1(Optional)1(Optional)2(Optional)-40to70°C✓V2416A-C7i7-3517UE4GB or optional1(Optional)1(Optional)2(Optional)-25to55°C–V2416A-C7-T i7-3517UE4GB or optional1(Optional)1(Optional)2(Optional)-40to70°C–V2416A-C7-CT-T i7-3517UE4GB or optional1(Optional)1(Optional)2(Optional)-40to70°C✓V2416A-C2-W7E Celeron1047UE4GB8GB1(Optional)2(Optional)-25to55°C–V2416A-C2-T-W7E Celeron1047UE4GB8GB1(Optional)2(Optional)-40to70°C–V2416A-C7-T-W7E Core i7-3517UE4GB8GB1(Optional)2(Optional)-40to70°C–Accessories(sold separately)AntennasANT-WDB-ANF-0407 2.4/5GHz,omni-directional antenna,4/7dBi,N-type(male)Battery KitsRTC Battery Kit Lithium battery with built-in connectorConnectorsM12A-5PMM-IP685-pin male circular threaded D-coded M12USB connector,IP68M12X-8PMM-IP678-pin male X-coded circular threaded gigabit Ethernet connector,IP67Power AdaptersPWR-24270-DT-S1Power adapter,input voltage90to264VAC,output voltage24V with2.5A DC loadPower CordsPWC-C7AU-2B-183Power cord with Australian(AU)plug,2.5A/250V,1.83mPWC-C7CN-2B-183Power cord with two-prong China(CN)plug,1.83mPWC-C7EU-2B-183Power cord with Continental Europe(EU)plug,2.5A/250V,1.83mPWC-C7UK-2B-183Power cord with United Kingdom(UK)plug,2.5A/250V,1.83mPWC-C7US-2B-183Power cord with United States(US)plug,10A/125V,1.83mDIN-Rail Mounting KitsDK-DC50131-01DIN-rail mounting kit,6screwsWall-Mounting KitsV2400Isolated Wall Mount Kit Wall-mounting kit with isolation protection,2wall-mounting brackets,4screws©Moxa Inc.All rights reserved.Updated Nov12,2018.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。
Belimo F6150HD 6英寸（150毫米）铬锂铸铁纵向扭矩阀（槽型）技术数据表说明书
F6150HDButterfly Valve with Lug types• Disc 304 stainless steel • Bubble tight shut-off • Resilient seat• Valve face-to-face dimensions comply with API 609 & MSS-SP-67• Completely assembled and tested, ready for installationType overviewType DN F6150HD150Technical dataFunctional dataValve size [mm]6" [150]Fluidchilled or hot water, up to 60% glycol Fluid Temp Range (water)-22...250°F [-30...120°C]Body Pressure Rating ANSI Class Consistent with 125, 232 psi CWP Close-off pressure ∆ps 200 psiFlow characteristic modified equal percentage Leakage rate 0% leakage, leakage rate A Servicing maintenance-free Flow Pattern2-way Controllable flow range 90° rotation Cv1579 Maximum Velocity 12 FPS Lug threads3/4-10 UNCMaterialsValve body Ductile cast iron ASTM A536Body finish epoxy powder coating (blue RAL 5002)Stem 416 stainless steel Stem seal EPDM (lubricated)SeatEPDMPipe connection for use with ANSI class 125/150 flanges Bearing RPTFEDisc304 stainless steel Gear operator materialsGears - hardened steel Suitable actuatorsNon-Spring PRB(X)Electrical fail-safePKRB(X)F6150HD Product featuresFlow/Mounting detailsDimensionsType DN WeightF6150HD15019 lb [8.6 kg]Valve with PRB(X) ActuatorA B C D E F Number of Bolt Holes12.0" [304] 2.3" [58]21.0" [533]16.0" [406] 5.4" [137] 5.4" [137]8F6150HDValve with PKR ActuatorA B C D E F Number of Bolt Holes12.0" [304] 2.2" [56]23.3" [591]18.3" [464] 5.4" [137] 5.4" [137]8PKRXUP-MFT-TModulating, Electrical Fail-Safe, 24...240 V,NEMA 4X with BACnetTechnical dataElectrical dataNominal voltageAC 24...240 V / DC 24...125 V Nominal voltage frequency 50/60 HzNominal voltage rangeAC 19.2...264 V / DC 19.2...137.5 V Power consumption in operation 52 W Power consumption in rest position 9 WTransformer sizing with 24 V 54 VA / with 240 V 68 VAAuxiliary switch2 x SPDT, 1 mA...3 A (0.5 A inductive), DC 5 V...AC 250 V (II, reinforced insulation), 1 x 10° / 1 x 0...90° (default setting 85°)Switching capacity auxiliary switch 1 mA...3 A (0.5 A inductive), DC 5 V...AC 250 V (II, reinforced insulation)Electrical Connection Terminal blocks, (PE) Ground-Screw Overload Protectionelectronic thoughout 0...90° rotation Data bus communicationCommunicative controlBACnet MS/TP Modbus RTU MP-Bus Functional data Operating range Y 2...10 V Operating range Y note 4...20 mAInput Impedance100 kΩ for 2...10 V (0.1 mA), 500 Ω for 4...20 mA, 1500 Ω for On/Off Operating range Y variable Start point 0.5...30 V End point 2.5...32 VOperating modes optional variable (VDC, on/off, floating point)Position feedback U 2...10 V Position feedback U note Max. 0.5 mA Position feedback U variable VDC variableSetting Fail-Safe Position 0...100%, adjustable with Belimo Assistant App (default setting 0%)Bridging time (PF)2 s Bridging time (PF) variable 0...10 s Pre-charging time 5...20 sDirection of motion motor reversible with app Direction of motion fail-safe reversible with app Manual override 7 mm hex crank, supplied Angle of rotation 90°Running Time (Motor)35 s / 90°Running time motor variable 30...120 s Running time fail-safe <30 s Noise level, motor 68 dB(A)Noise level, fail-safe62 dB(A)PKRXUP-MFT-TDefault/ConfigurationApplicationOperationBridging timeFactory settingsFunctional dataPosition indication top mounted domed indicator Safety dataPower source ULClass 2 Supply Degree of protection IEC/EN IP66/67Degree of protection NEMA/UL NEMA 4XEnclosure UL Enclosure Type 4XAgency ListingcULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2014/30/EU and 2014/35/EU Quality Standard ISO 9001Ambient humidity Max. 100% RH Ambient temperature -22...122°F [-30...50°C]Servicingmaintenance-free Weight Weight14.0 lb [6.4 kg]MaterialsHousing material Die cast aluminium and plastic casingProduct featuresDefault parameters for DC 2...10 V applications of the PKR..-MFT actuator are assigned during manufacturing. If required, different parameters of the actuator can be ordered. Theseparameters are variable and can be modified by factory pre-set, the handheld ZTH US or using the Belimo App on a smart phone with Near Field Communications (NFC) programming.PR Series valve actuators are designed with an integrated linkage and visual position indicators. For outdoor applications, the installed valve must be mounted with the actuator at or above horizontal. For indoor applications the actuator can be in any location including directly under the valve.The PR series actuator provides 90° of rotation and a visual indicator shows the position of the valve. The PR Series actuator uses a low power consumption brushless DC motor and is electronically protected against overload. A universal power supply is furnished to connect supply voltage in the range of AC 24...240 V and DC 24...125 V. Included is a smart heater with thermostat to eliminate condensation. Two auxiliary switches are provided; one set at 10° open and the other is field adjustable. Running time is field adjustable from 30...120 seconds by using the Near Field Communication (NFC) app and a smart phone.†Use 60°C/75°C copper wire size range 12...28 AWG, stranded or solid. Use flexible metal conduit. Push the listed conduit fitting device over the actuator’s cable to butt against the enclosure. Screw in conduit connector. Jacket the actuators input wiring with listed flexible conduit. Properly terminate the conduit in a suitable junction box. Rated impulse Voltage 4000 V. Type of action 1. Control pollution degree 3.Electrical interruptions can be bridged up to a maximum of 10 s.In the event of a power failure, the actuator will remain stationary in accordance with the set bridging time. If the power failure is greater than the set bridging time, then the actuator will move into the selected fail-safe position.The bridging time set ex-works is 2 s. This can be modified on site in operation with the use of the Belimo service tool MFT-P.Settings: The rotary knob must not be set to the "PROG FAIL-SAFE" position!For retroactive adjustments of the bridging time with the Belimo service tool MFT-P or with the ZTH EU adjustment and diagnostic device only the values need to be entered.Default parameters for DC 2...10 V applications of the PKR..-MFT actuator are assigned during manufacturing. If required, different parameters of the actuator can be ordered. Theseparameters are variable and can be modified by factory pre-set, the handheld ZTH US or using the Belimo App on a smart phone with Near Field Communications (NFC) programming.PKRXUP-MFT-TAccessoriesGatewaysDescriptionType Gateway MP to BACnet MS/TP UK24BAC Gateway MP to Modbus RTU UK24MOD Gateway MP to LonWorksUK24LON Electrical accessoriesDescriptionType Service Tool, with ZIP-USB function, for programmable andcommunicative Belimo actuators, VAV controller and HVAC performance devicesZTH USMechanical accessoriesDescriptionType Hand crank for PR, PKR, PM ZG-HND PR ToolsDescriptionTypeConnection cable 10 ft [3 m], A: RJ11 6/4 ZTH EU, B: 3-pin Weidmüller and supply connectionZK4-GEN Service Tool, with ZIP-USB function, for programmable and communicative Belimo actuators, VAV controller and HVAC performance devicesZTH USElectrical installationMeets cULus requirements without the need of an electrical ground connection.Universal Power Supply (UP) models can be supplied with 24 V up to 240 V.Disconnect power.Provide overload protection and disconnect as required.Two built-in auxiliary switches (2x SPDT), for end position indication, interlock control, fanstartup, etc.Only connect common to negative (-) leg of control circuits.Actuators may be controlled in parallel. Current draw and input impedance must be observed.Warning! Live electrical components!During installation, testing, servicing and troubleshooting of this product, it may be necessary to work with live electrical components. Have a qualified licensed electrician or other individual who has been properly trained in handling live electrical components perform these tasks. Failure to follow all electrical safety precautions when exposed to live electrical components could result in death or serious injury.Wiring diagrams On/OffPKRXUP-MFT-T Floating PointModulatingBACnetOn/Off Auxiliary SwitchesPKRXUP-MFT-T Temperature Sensors。
6802轴承尺寸参数规格
6802轴承尺寸参数规格
FAG 61802轴承
FAG 61802是单列深沟球轴承，开式设计，主要尺寸规格：15mm*24mm*5mm，产地德国；61802轴承参数：动载荷：2200N，静载荷：1260N，极限转速：45000 1/min。
深沟球轴承 61802, 根据 DIN 625-1 标准的主要尺寸，其特点：径向载荷,单向轴向载荷,双向轴向载荷,无密封,脂润滑,油润滑,欢迎咨询航五瑞。
6802轴承尺寸参数规格 1
图纸：
轴承型号61802
品牌FAG轴承
类型开式设计，单列，深沟球轴承
d15 mm
D24 mm
B 5 mm
D121.1 mm
D a max22 mm
d118 mm
d a min17 mm
r a max0.3 mm
r min0.3 mm
重量0.0080 kg
基本额定动载荷2200 N （径向）
基本额定静载荷1260 N （径向）
极限速度45000 1/min
参考转速19200 1/min
疲劳极限载荷53 N （径向）
61802轴承应用范围
打磨机倒角机电动喷枪电动工具镶嵌
机压型机复合式破碎机塑料破碎机排沙潜水泵无油压缩机分级机
与61802轴承相关产品
类似产品：FAG 61818-2Z-Y轴承FAG 61805-2Z轴
承FAG 61810-2Z-Y轴承FAG 61809-2Z-Y轴承FAG 61822-2Z-Y轴承FAG 61801-2Z轴承等属同类产品。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
PART NUMBER CAP. TOL. ±10%
6 WVDC @ + 85°C, SURGE = 8 V . . . 4 WVDC @ + 125°C, SURGE = 5 V 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 270.0 330.0 A A A A A A A A A A A A A A A A A A A B B B B B B B B B B B R R R R R R S S S 150D224X0006A2 _ 150D334X0006A2 _ 150D474X0006A2 _ 150D684X0006A2 _ 150D105X0006A2 _ 150D155X0006A2 _ 150D225X0006A2 _ 150D335X0006A2 _ 150D475X0006A2 _ 150D685X0006A2 _ 150D106X0006B2 _ 150D156X0006B2 _ 150D226X0006B2 _ 150D336X0006B2 _ 150D476X0006B2 _ 150D686X0006R2 _ 150D107X0006R2 150D127X0006R2 150D157X0006R2 150D187X0006R2 150D227X0006S2 150D277X0006S2 150D337X0006S2 150D224X9006A2 150D274X9006A2 150D334X9006A2 150D394X9006A2 150D474X9006A2 150D564X9006A2 150D684X9006A2 150D824X9006A2 150D105X9006A2 150D125X9006A2 150D155X9006A2 150D185X9006A2 150D225X9006A2 150D275X9006A2 150D335X9006A2 150D395X9006A2 150D475X9006A2 150D565X9006A2 150D685X9006A2 150D825X9006B2 150D106X9006B2 150D126X9006B2 150D156X9006B2 150D186X9006B2 150D226X9006B2 150D276X9006B2 150D336X9006B2 150D396X9006B2 150D476X9006B2 150D566X9006B2 150D686X9006R2 150D826X9006R2 150D107X9006R2 150D127X9006R2 150D157X9006R2 150D187X9006R2 150D227X9006S2 150D277X9006S2 150D337X9006S2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 3.0 3.0 3.0 3.0 6.0 6.0 6.0 6.0 10.0 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8
DIMENSIONS in inches [millimeters]
1.500 ± 0.250 [38.10 ± 6.35] 1.500 ± 0.250 D DIA.
L
[38.10 ± 6.35]
SOLID TINNED NICKEL LEADS J MAX.
0.047 [1.19] MAX. 0.125 [3.18] MAX.
PERFORMANCE CHARAБайду номын сангаасTERISTICS
Operating Temperature: - 55°C to + 85°C. (To + 125°C with voltage derating.) Capacitance Tolerance: At 120 Hz, + 25°C. ± 10% standard. ± 5% available as special. ± 20%, At + 85°C: Leakage current shall not exceed 10 times the values listed in the Standard Ratings Tables. At +125°C: Leakage shall not exceed 15 times the values listed in the Standard Ratings Tables. Life Test: Capacitors shall withstand rated DC voltage applied at + 85°C for 2000 hours or derated DC voltage applied at + 125°C for 1000 hours. Following the life test: 1. DCL shall not exceed 125% of the initial requirement. 2. Dissipation Factor shall meet the initial requirement. 3. Change in capacitance shall not exceed ± 5%.
WITH INSULATING SLEEVE* CASE CODE A B R S D 0.135 ± 0.016 [3.43 ± 0.41] 0.185 ± 0.016 [4.70 ± 0.41] 0.289 ± 0.016 [7.34 ± 0.41] 0.351 ± 0.016 [8.92 ± 0.41] L 0.286 ± 0.031 [7.26 ± 0.79] 0.474 ± 0.031 [12.04 ± 0.79] 0.686 ± 0.031 [17.42 ± 0.79] 0.786 ± 0.031 [19.96 ± 0.79] J (MAXIMUM) 0.422 [10.720] 0.610 [15.490] 0.822 [20.880] 0.922 [23.420] AWG NO. 24 24 22 22
元器件交易网
150D
Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed, Axial-Lead
ORDERING INFORMATION
150D MODEL 224 CAPACITANCE This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 CAPACITANCE TOLERANCE X0 = ± 20% X9 = ± 10% *X5 = ± 5% *Special order 006 DC VOLTAGE RATING AT + 85°C This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A CASE CODE See Ratings and Case Codes Table. 2 STYLE NUMBER 2 =Insulated sleeve. T PACKAGING
Dissipation Factor: At 120 Hz, + 25°C. Dissipation factor, as determined from the expression 2πfRC, shall not exceed the values listed in the Standard Ratings Tables. DC Leakage Current (DCL Max.): At + 25°C: Leakage current shall not exceed the values listed in he Standard Ratings Tables.
MAX. DCL @ + 25°C (µF) MAX. DF @ + 25°C 120 Hz (%)
®
Vishay Sprague
T = Tape and Reel
STANDARD RATINGS
MAX. DCL @ + 25˚C (µA) MAX. DF @ + 25˚C 120 HZ (%)
CAPACITANCE (µF)
CASE CODE
PART NUMBER CAP. TOL. ± 20%
LEAD SIZE NOMINAL DIAMETER 0.020 [0.51] 0.020 [0.51] 0.025 [0.64] 0.025 [0.64]
*When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body. 10 For technical questions, contact tantalum@ Document Number: 40015 Revision 11-Jun-03
Document Number: 40015 Revision 11-Jun-03
For technical questions, contact tantalum@