NT90THLCEDC5VI中文资料
NTC-790 NTC-990 HSPA Cellular Routers Quick Start
NTC-790/NTC-990NTC-790 NTC-990HSPA Cellular RoutersQuick Start GuideThank you for choosing the NTC Series Router from NetComm. This guide will cover the NTC-790 and NTC-990 (collectively referred to in this document as the NTC series). This guide will provide a series of step by step instructions to ensure the configuration of your router goes as smooth as possible.Firstly please check off that you have received all the items in your package.AntennasFigure-1 overview of the NTC series router front panelService Type – Indicates the network you are onSerial portused for configuration alternative to the html page. Or serial based data transferRF Port for connection of antenna (SMA connection)• Black antenna for use on 850/900MHz networks•Gray antenna for use on 2100/1900Mhz networksFigure-2 overview of the NTC series router back panelStep One: Computer PreparationThe NTC Cellular is configured using a web browser, In order for your PC to be able to connect to the device configure your PC to obtain an IP address automatically from the NTC series device using DHCP.Windows XP users may use the following procedure.•Follow the path Start -> Control Panel -> Network Connections. Right click Local Area Connection and select Properties to open the configuration dialogue box of Local Area Connection as per Figure-3.Figure-3: Configuration Window of Local Area Connection• Find and click Internet Protocol (TCP/IP) from the protocol list box and then click the Properties button (as per Figure-2). The TCP/IP configuration window will pop up as per Figure-3.• Under General tab, select radio button Obtain an IP address automatically and Obtain DNS server address automatically (See Figure-4). Then press OK button to close TCP/IP configuration window.• Press the Close button to complete the computer preparation for NTCseries device.Figure-4: Configuration Window of TCP/IPStep Two: Inserting SIM cardInserting the SIM cardFirst make sure the SIM card in inserted correctly. You insert the SIM with gold side up and in the direction as shown below:Step Three: Physical Connection• Install the supplied antenna to the NTC Series Router. This needs to be screwed to the RF/AUX Antenna connector(s).• Connect the NTC Series Router to your apparatus with the supplied Ethernet Cable. One end of the cable is plugged in to the NTC Series Router’s Ethernet Port; the other end is plugged in to the network port of your Ethernet device.• Connect the input of Power Adapter to the mains and plug its output to the Power Jack of NTC Series Router. The Power LED on the panel should be illuminated.• Wait for a while until Service LED (SVC TYPE) and RSSI LED turn solid green indicating that the NTC Series Router has booted up successfully.To get connected to the NTC’s configuration pages, open a web browser to the NTC’s default IP address of 192.168.1.50On connection you will be asked to supply a User Name: admin and Password: password.If this is the first time you have used this SIM card chances are that the SIM will be locked if this is the case it will be indicated by the SIM Status showing ENTERPIN on the Status page(Figure-5) you will need to unlock it with a PIN number supplied with the SIM card by your chosen carrier. Figure-5: Status page showing ENTER PINIf the SIM Status is ENTER PIN then do the following:•Click on the Security Link tab on the left (Figure-6)Figure-6: Status page Security Link tab location• On security page enter PIN code and confirm the PIN code. Then hit Save (Figure-7).Figure-7: Security page PIN settings• Once the SIM has been unlocked you will see a pop up confirming this.• Now Click on the Status Button and the Status page should look as below with SIM Status OK (Figure-8).Figure-8: Status page for SIM Status OK.Step Five: Network Connection• Click on the Status button and the status page of NTC Series Router Setup will now be displayed as per Figure-9. The PPP status on the page should be DISABLED because your new device is not enabled (see the area pointed by the red arrow). Click the Data Connection item on the left panel of the screen to activate the Data Connection page:Figure-9: Status page for Data Connection down• Figure-10 shows the major area of the Data Connection page. In PPP Profile Connect field, the Auto Connect option is currently Disabled - to make the NTC Series Router operational you must enable it.• Select a profile number in the PPP User Configurable Profile Setting section and make sure that the APN field is set appropriately. If it is not set then key in the APN and hit the Modify Entry Button. The username and password is required if this is a VPN profile.• Select the preferred profile from the PPP User Configurable Profile Setting section and select its Item number in the dropdown list of Profile to connect to.• Finally, press the Save button and wait until DCD LED becomes solid amber indicating that connection to the network is successful. From now on, AutoConnect will keep Enabled status unless you come back to this page and disable it. Then click the radio button Enable to activate Auto Connect.Figure-10: Data Connection screen• To confirm the connection, press the Status button near the left top corner of the web page - you should see an updated Status page as per Figure-11.Please pay close attention to PPP field on the page (shown by the red arrow). PPP Status should be UP. PPP IP Address shows the current IP address that the network has allocated for the NTC Series Router device. Other information is also shown there;Figure-11: Status page for Data Connection upCongratulations - your new NTC Series Router is now ready to use! Enjoy your wireless web surf with this fantastic device.For more detailed information on The configuration and activation of other features of the NTC Series Router, please visit our website .au and download the document titled:NTC-790NCT-990CellularRouterUsersManualv1-55.pdfFor further assistance in trouble shooting please contact your accredited vender where the NTC Series Router was purchased from. NETCOMM LIMITED PO Box 1200, Lane Cove NSW 2066 AustraliaP: 02 9424 2070 F: 02 9424 2010E:*****************.au W: .auTrademarks and registered trademarks are the property of NetComm Limited or their respective owners.Specifications are subject to change without notice. Images shown may vary slightly from the actual product.。
调速器硬件手册
ETD 790直流调速器
页码：2 /86
ETD 790直流调速器 电流预测控制
6.4e 模拟输出 .............................................................................................................. 39 6.4f 422/485串行口....................................................................................................... 41 6.4g 直流测速电机反馈接线 ......................................................................................... 42 6.4h 用于指示输入和输出的LED指示器 ....................................................................... 43 6.5 RS 232、CAN总线、编码器1、编码器2的连接器....................................................
NT90THLCDAC12VCF0.9中文资料
FeaturesSmall size, light weight. Low coil power consumption, heavy contact load. Strong anti-shock and anti-vibration, high reliability, long life.Suitable for automobile, machine, electronic equipment, air conditioner and household appliance applications.PC board mounting and direct insert mounting available.Ordering InformationNT90T H L A S DC12V C B 0.91 2 3 4 5 6 7 8 91 Part number ：NT90T 、NT90T 22 Load ：H:30A ；N:40A3 High ：NIL: Standard ；L: Low profile type4 Contact arrangement ：A:1A ；B:1B ；C:1C5 Enclosure ：S: Sealed type ；D: Dust cover ； E: Covered ；O: Open type6 Coil rated Voltage(V)：AC:12,24,110,120,220DC:3,5,6,9,12,15,18,24,48,1107 Contact material ：C: Ag CdO ；S: Ag SnO 28 Resist heat class ：B:130℃ F:155℃9 Coil power consumption ：0.6:0.6W ；0.9:0.9W NIL:2VAContact DataContact Arrangement 1A SPSTBNO f 1B SPSTNC f 1C SPDT(B-M) Contact MaterialAg CdO Ag SnO 2 Ag SnO 2 In 2O 3Contact Rating (resistive)NO ：30A/240VAC,14VDC ；NC ：20A/240VAC ;30A/14VDC NO ：40A/250VAC,30VDC ；NC ：30A/250VAC,30VDC (0.9W)Motor load ：2HP 250VAC ；1.5HP 250V Lamp load ：TV-5Max. Switching Power1100W 7200VAMax. Switching Voltage110VDC 250VAC Max. Switching Current:40A Contact Resistance or Voltage drop አ30m Item 3.12 of IEC255-7Electrical 105Item 3.30 of IEC255-7Operation life Mechanical107Item 3.31 of IEC255-7Coil ParameterAC Coil ParameterRATED VOLTAGEVACDASH NUMBERSRATEDMaxCOIL RESISTANCE ±10%PICK UP VOLTAGE VAC(max)(75%of rated voltage)RELEASE VOLTAGE VAC(min)(30%of rated voltage)COIL POWEROperate Time ms Release Time ms012AC 1215.6279.0 3.6024AC 2431.212018.07.2110AC 110143236082.533.0120AC 120156304090.036.0220AC22028613490165.066.02VA __CAUTION : 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.2.Pickup and release voltage are for test purposes only and are not to be used as design criteria.元器件交易网003-9003 3.9。
徕卡TC905说明书
照准轴误差是视准轴与横轴不正交所产生的误差，其测定与改正过程与垂直度盘指标差 类似，这里不再赘述。
并非在每次测量前必须进行上述 2 项仪器误差的检验，定期作检验即可。 3.4 单位及角度参数
按住 键超过 2 秒进入配置菜单“CONFIG MENU”，选择“5.UNITS”并进入，界 面显示如下：
键
功能
选择功能及输入下一行
改变数据显示行
选择功能及输入上一行 改变数据显示行
光标左移 便于数字的输入与参数选择
光标右移 便于数字的输入与参数选择 用于更改选项 2.4 输入键（黄色） 键
数字与字符的输入键 …
小数点和字符
正负号转换
确认 中断激活功能 删除错误信息 退出
3、配置菜单
在开始测量之前，应通过“CONFIG MENU”对仪器进行配置，以便使仪器处于正确的 工作状态。
在每一行输入并确认，最后出现如下显示：
Yes：添加编码到原编码表中，no：返回输入模式，不记录。用
确认即可。 4.4.2 搜寻点号（FIND）
键更改选择。回车
该项功能搜寻并显示点的数据，按 “3.DATAMANAGER”，界面显示如下：
键 进 入 “ MENU ”， 选 择 并 进 入
选择并进入“2.FIND”，界面显示如下：
3.5.4 HzCOMP 设置 若设置 HzCOMP=ON，则能自动改正竖轴倾斜对水平方向观测值的影响。
3.5.5 HZcoll 设置 当 HZcoll=ON 时，各方向观测值能自动进行照准轴误差改正；反之，不进行改正。
3.5.6 AUToff 设置 当 AUToff=ON 时，在停止操作 10 分钟后自动关机。开机时 AUToff 自动激活为：“ON”。
三极管参数表
|常用三极管参数表下表是常用三极管的一些参数以及替换型号器件型号电压电流代换型号3DG9011 50V 2N4124 CS9011 JE9011 9011 50V LM9011 SS90119012 40V LM90129012(HH) 40V SS90129012LT1 40V A12983DG9013 40V CS9013 JE9013&9013 40V LM90139013(HH) 40V SS90139013LT1 40V C32653DG9014 50V CS9014 JE90149014 50V LM9014 SS90149014LT1 50V C16239015 50V LM9015 SS9015TEC9015 50V BC557 2N3906TEC9015A 50V BC557 2N3906TEC9015B 50V BC557 2N3906[TEC9015C 50V BC557 2N39063DG9016 30V JE90169016 30V SS9016TEC9016 40V BF240 BF254 BF5948050 40V SS80508050LT1 40V KA3265ED8050 50V BC337SDT85501 60V 10A 3DK104CSDT85502 80V 10A 3DK104CSDT85503 100V 10A 3DK104D~SDT85504 140V 10A 3DK104ESDT85505 170V 10A 3DK104FSDT85506 60V 10A 3DK104CSDT85507 80V 10A 3DK104CSDT85508 100V 10A 3DK104DSDT85509 140V 10A 3DK104EED8550 50V BC3378550 40V LM8550 SS85508550LT1 40V KA32652SA1015 50V BC177 BC204 BC212 BC213 BC251 BC257 BC307 BC512 BC557 CG1015 CG673 ￥2SC1815 60V BC174 BC182 BC184 BC190 BC384 BC414 BC546 DG458 DG18152SC1815L 60V BC550 2SC2240 2S26742SC2675 2SC33782SC1815LT1 60V 9014LT12SC945 60V BC107 BC171 BC174 BC182 BC183 BC190 BC207 BC237 BC382 BC546 BC547 BC582 DG945 2N2220 2N2221 2N2222 3DG120B 3DG4312 MMBT3904 40V BCW72 3DG120CMMBT3906 40V BCW70 3DG120CMMBT2222 未知BCX19 3DG120CMMBT2222A 75V 3DK10CMMBT5401 160V 3CA3FMMBTA92 300V 3CG180H'BC807 50V BC338 BC537 BC635 3DK14B BC807R 50V BCX17 BCX17R BCW68BCW68RBC807-W 50V BCX17 BCW68 2SB1219ABC817 50V BCX19 BCW65 BCX66BC817R 50V BCX19 BCX19R BCW65BCW65R BCX66 BCW66RBC817-W 50V BCX19 BCW65 BCW66 2SD1820 2SD1949BC846 80V BCV71 BCV72BC846R 80V BCV71 BCV71R BCV72 BCV72R BC846-W 80V BCV71 BCV72 BCV72RBC847 50V BCW71 BCW72 BCW81《BC847R 50V BCW71 BCW71R BCW72 BCW72R BCW81 BCW81RBC847-W 50V BCW71 BCW72 BCW812SC4101 2SC4102BC848 30V BCW31 BCW32 BCW33 BCW71 BCW72 BCW81BC848R 30V BCW31 BCW31R BCW32 BCW32R BCW33 BCW33R BCW71 BCW71R BCW72 BCW72R BCW81 BCW81RBC848-W 30V BCW31 BCW32 BCW33 BCW71 BCW72 BCW81 2SC4101 2SC4102 2SC4117BC856 50V BCW89BC856R 80V BCW89 BCW89RBC856-W 80V BCW89 2SA1507 2SA1527BC857 50V BCW69 BCW70 BCW89BC857R 50V BCW69 BCW69R BCW70 BCW70R BCW89 BCW89R（BC857-W 50V BCW69 BCW70 BCW892SA1507 2SA1527BC858 30V BCW29 BCW30 BCW69 BCW70 BCW89BC858R 30V BCW29 BCW29R BCW30 BCW30R BCW69 BCW69R BCW70 BCW70R BCW89 BCW89RBC858-W 30V BCW29 BCW30 BCW69 BCW70 BCW89 2SA1507 2SA15272SA733 60V BC177 BC204 BC212 BC213 BC251 BC257 BC307 BC513 BC557 3CG120C 3CG4312 MMUN2111 50V UN2111MUN2111 50V MMUN2111UN2111 50V FN1A4M DTA114EK RN24022SA1344MMUN2112 50V UN2112MUN2112 50V MMUN2112—UN2112 50V FN1F4M DTA124EK RN24032SA1342MMUN2113 50V UN2113MUN2113 50V MMUN2113UN2113 50V FN1L4M DTA144EK RN24042SA1341MMUN2211 50V UN2211MUN2211 50V MMUN2211UN2211 50V DTC114EK FA1A4M RN14022SC3398MMUN2212 50V UN2212MUN2212 50V MMUN2212UN2212 50V DTC124EK FA1F4M RN14032SC3396、MMUN2213 50V UN2213MUN2213 50V MMUN2213UN2213 50V DTC144EK FA1L4M RN14042SC33952SC3356 20V 2SC3513 2SC3606 2SC38292SC3838K 30V BF517 BF799 2SC3015 2SC3016彩显中易损大功率三极管主要参数表型号功率(W) 反压(V) 电流(A) 功能BU208A 50 1500 5 电源开关管BU508A 75 1500 8 电源开关管<BU2508AF 45 1500 8 行管* BU2508DF 125 1500 8 行管* BU2508D 125 1500 8 行管BU2520AF 45 1500 10 行管BU2520AX 45 1500 10 行管* BU2520DF 125 1500 10 行管BU2522AF 45 1500 10 行管* BU2522DF 80 1500 10 行管* BU2525DF 45 800 12 行管BUH515 60 1500 8 行管#BUH515D 60 1500 8 行管C1520 10 250 视放C1566 250 视放C1573 250 视放C1875 50 1500 电源开关管C3153 100 900 6 电源开关管C3026 50 1700 5 行管C3457 50 1100 3 电源开关管C3459 90 1100 电源开关管C3460 100 1100 6 电源开关管—C3461 140 1100 8 行管*C3683 50 1500 5 行管C3686 50 1400 8 行管C3687 150 1500 8 行管C3481 120 1500 5 电源开关管C3688 150 1500 10 行管*C3842 120 1500 6 行管*C3883 50 1500 5 行管C3885 50 1400 7 行管C3886 50 1400 8 行管\C3887 80 1400 7 行管C3888 80 1400 80 行管C3889 80 1400 80 行管*C3891 50 1400 6 行管*C3892 50 1400 7 行管*C3893 50 1400 8 行管C3895 60W 1400V 7A 行管C3896 70 1400 8 行管*C3897 180 1500 12 行管C3897 250 1500 25 行管—C3998 250 1500 25 行管*C4122 60 1500 6 行管*C4123 60 1500 7 行管*C4124 70 1500 8 行管*C4125 70 1500 10 行管C4237 150 800 10 行管*C4269 60 1500 7 行管*C4293 50 1500 5 行管*C4294 50 1500 6 行管*C4589 50 1500 10 行管$*C4742 50 1500 6 行管*C4744 50 1500 6 行管C4747 50 1500 10 行管*C4769 60 1500 7 行管C4770 60 1500 7 行管C5048 50 1500 12 行管C5088 45 1500 8 行管C5129 50 1500 6 行管C5144 200 1700 20 行管C5148 50 1500 8 行管%C5250 50 1500 8 行管C5297 60 1500 8 行管C5299 60 1400 8 行管C5339 50 1500 7 行管C5418 120 1500 6 行管*D1396 50 1500 2 行管*D1398 50 1500 5 行管D1402 120 1500 5 电源开关管D1403 120 1500 6 电源开关管*D1426 80 1500 行管%*D1427 80 1500 5 行管*D1428 80 1500 6 行管D1433 80 1500 7 行管D1434 80 1500 5 行管*D1455 50 1500 5 行管*D1554 40 1500 行管D1555 50 1500 5 电源开关管*D1878 60 1500 6 行管*D1879 60W 1500V 5A 行管*D1880 70 1500 8 行管…*D1881 70 1500 10 行管D1886 70 1500 8 行管D1887 70 1500 10 行管*D2125 50 1500 5 行管*D870 50 1500 5 行管功率Pcm/W 反压BVCBO 电流ICM/A（*带阻尼）进口与国产显示器常用三极管代换表型号可代用型号用途价格2SA562 CG673B、2SB689 预视放2SA670 2SA1069、2SB513 电源调整管…2SA673 2SA719、2SA697 帧激励2SA715 3CF3A、2SB529 场输出管2SA778A 3CG21C、CG75-1AB 开关电源误差放大2SA778AK C3CG21G、CG75-1A 开关电源误差放大2SA844D 3CG21C、CG75-1AB 视放2SA844E 3CG21G 视放2SA940 CD568B 场输出管2SA6395 2SA778、2SA858 行激励管2SB337 B337 电源调整管2SB407 3L780 电源调整管(2SB548 3CF3B、2SA794 场输出管2SB566AK CD77-1A、3CF5A 电源调整管2SB556K CD77-1A、3CF5B 电源调整2SB621 3CG23B、2SB1035 电源推动管2SC458 3DG4A、2SC664 行振荡2SC536 3DG4A、2SC2320 电源推动管2SC562 G6738、B689 预视放2SC633 3DG6B、2SC1684 行振荡管2SC634 3DG12B 行振荡管2SC643A D2027、2SD818 行输出管^2SC680A 3DD205B、2SC1025 场输出2SC681 3DD102B、2SC901 行输出2SC734 3DX200B、2SC2274 行振荡管2SC828 3DG56B、2SC3330 电源误差放大管2SC935 3DD102D、2SD320 电源调整管2SC8937 D2027、2SD818 行输出管2SC1034 2SD818、2SD299 行输出管2SC1162 FA433A、2SC2068 场输出枕形校正2SC1172 D2027、2SD820 行输出管2SC1209 3DG12A、2SD734 电源误差放大管#2SC1213 3DG130A、2SC2120 电源误差放大管2SC1213A 3DG12B、2SC1247A 电源误差放大2SC1214 3DA151A、2SC2002 枕形校正2SC1308 D209、2SD820 行输出管2SC1318 3DG12A、2SC2274 行激励管2SC1364 3DX2038、2SC2320 行激励管2SC1505 DA1722B、2SC1757 行视放2SC1507 DA1722B、2SC1756、2SC1757 行激励管2SC1364 3DX2038、C23020 行激励管2SC1520 DA1722B、2SC2068 预视放!2SC1566 3DA151D、2SC1514 视放2SC1573 3DA87C、2SC1762 视放2SC1672 3DD102B、2SC2433 电源调整管2SC1685 3DD180、2SC1570 脉冲开关2SC1819 3DA151D、2SC2425 视放2SC1890A 3DA878、2SC2363 视放2SC1905 3DA151D、2SD1163 视放2SC1942 D209、2SD1401 行输出管2SC2233 3DD12B、2SC2373 行输出2SD201 3DD102A、2SD125A 电源调整管。
启珑微电子产品手册说明书
产品手册PRODUCT MANUAL(北京︶有限公司并一直致力于为工业智能控制、医疗设备、轨道交通、智能交通以及智能家居等领域提供更优质的产品与服务。
公司具有深厚的文化底蕴，由多位有欧美留学、工作经历的归国人员创办，坚实的理论功底和丰富的芯片设计经验奠定了启珑微电子的高起点和高水准，并迅速成长为业内具有自主知识产权的中国IC设计品牌之一。
产品手册01序号产品型号封装形式产品概述兼容型号1CLM811HST-AXC TQFP-48SL811HST-AXC 2CLCP82C55AZ DIP-40CP82C55AZ 3CLIP82C55AZ DIP-40IP82C55AZ 4CLCS82C55AZ PLCC-44CS82C55AZ 5CLIS82C55AZ PLCC-44IS82C55AZ 6CLCQ82C55AZ MQFP-44CQ82C55AZ 7CLIQ82C55AZ MQFP-44IQ82C55AZ 8CLID82C55AZ DIP-40ID82C55A 9CLMD82C55A/B DIP-40MD82C55A/B 10CLMD82C55QA DIP-40MD82C55QA 11CLM65HVD230D SOIC-8SN65HVD230D 12CLM65HVD230QD SOIC-8SN65HVD230QD 13CLM65HVD231D SOIC-8SN65HVD231D 14CLM65HVD231QD SOIC-8SN65HVD231QD 15CLM65HVD232D SOIC-8SN65HVD232D 16CLM65HVD232QD SOIC-8SN65HVD232QD 17CLM65HVD233D SOIC-8具有待机模式和环回功能的 3.3V SN65HVD233D 18CLM65HVD233HD SOIC-8具有待机模式和环回功能的 3.3V SN65HVD233HD 19CLM65HVD233QDRQ1SOIC-8具有待机模式和环回功能的 3.3V SN65HVD233QDRQ120CLM65HVD233MDREP SOIC-8具有待机模式和环回功能的 3.3V SN65HVD233MDREP产品手册02序号产品型号封装形式产品概述兼容型号21CLM65HVD234D SOIC-8SN65HVD234D 22CLM65HVD234QDRQ1SOIC-8SN65HVD234QDRQ123CLM65HVD235D SOIC-8SN65HVD235D 24CLM65HVD235QDRQ1SOIC-8SN65HVD235QDRQ125CLM75176BPS SOIC-8SN75176BPSR 26CLM75176BDR SOIC-8SN75176BDR 27CLM75176ADR SOIC-8SN75176ADR 28CLM75176AP DIP-8SN75176AP 29CLM76176BP DIP-8SN75176BP 30CLM75179BPS SOIC-8SN75179BPS 31CLM75179BDR SOIC-8SN75179BDR 32CLM75179AP DIP-8SN75179AP 33CLM75179BP DIP-8SN75179BP 34CLM65HVD08D SOIC-8SN65HVD08D 35CLM65HVD08P DIP-8SN65HVD08P 36CLM65HVD75D SOIC-8具有IEC ESD保护功能和20Mbps的SN65HVD75D 37CLM65HVD75DGK VSSOIC-8具有IEC ESD保护功能和20Mbps的SN65HVD75DGK 38CLM65HVD75DRBT VDFN-8具有IEC ESD保护功能和20Mbps的SN65HVD75DRBT 39CLM3085CPA+DIP-8(10Mbps)、限摆率RS-485/MAX3085CPA+40CLM3085EPA+DIP-8(10Mbps)、限摆率RS-485/MAX3085EPA+产品手册03序号产品型号封装形式产品概述兼容型号41CLM3085EEPA DIP-8(10Mbps)、限摆率RS-485/MAX3085EEPA 42CLM3085CSA+T SOIC-8(10Mbps)、限摆率RS-485/MAX3085CSA+43CLM3085ECSA+T MSOIC-8(10Mbps)、限摆率RS-485/MAX3085ECSA+T 44CLM3085ESA+T SOIC-8(10Mbps)、限摆率RS-485/MAX3085ESA+45CLM3085EESA+T SOIC-8(10Mbps)、限摆率RS-485/MAX3085EESA+46CLM3088CSA+T SOIC-8MAX3088CSA+T 47CLM3088ECSA+T SOIC-8MAX3088ECSA+T 48CLM3088ESA+T SOIC-8MAX3088ESA+T 49CLM3088EESA+T SOIC-8MAX3088EESA+T 50CLM3088CPA+DIP-8MAX3088CPA+51CLM3088ECPA+DIP-8MAX3088ECPA+52CLM3088EPA+DIP-8MAX3088EPA+53CLM3088EEPA+DIP-8MAX3088EEPA+54CLM485CPA+DIP-8低功耗、限摆率、RS-485/RS-422MAX485CPA+55CLM485ECPA+DIP-8低功耗、限摆率、RS-485/RS-422MAX485ECPA+56CLM485EPA+DIP-8低功耗、限摆率、RS-485/RS-422MAX485EPA+57CLM485EEPA+DIP-8低功耗、限摆率、RS-485/RS-422MAX485EEPA+58CLM485CSA+SOIC-8低功耗、限摆率、RS-485/RS-422MAX485CSA+59CLM485ESA+SOIC-8低功耗、限摆率、RS-485/RS-422MAX485ESA+60CLM485EESA+SOIC-8低功耗、限摆率、RS-485/RS-422MAX485EESA+产品手册04序号产品型号封装形式产品概述兼容型号61CLM3490CSA+SOIC-8 3.3V供电、10Mbps、限摆率、真MAX3490CSA+62CLM3490ECSA+SOIC-8 3.3V供电、10Mbps、限摆率、真MAX3490ESA+63CLM3490ESA+SOIC-8 3.3V供电、10Mbps、限摆率、真MAX3490ESA+64CLM3490EESA+SOIC-8 3.3V供电、10Mbps、限摆率、真MAX3490EESA+65CLM3491CSD SOP-14 3.3V供电、10Mbps、限摆率、真MAX3491CSD+66CLM3491ECSD+SOP-14 3.3V供电、10Mbps、限摆率、真MAX3491ECSD+67CLM3491ESD+SOP-14 3.3V供电、10Mbps、限摆率、真MAX3491ESD+68CLM3491EESD+SOP-14 3.3V供电、10Mbps、限摆率、真MAX3491EESD+69CLM490CSA+SOIC-8低功耗、限摆率、RS-485/RS-422MAX490CSA+70CLM490ECSA+SOIC-8低功耗、限摆率、RS-485/RS-422MAX490ECSA+71CLM490ESA+SOIC-8低功耗、限摆率、RS-485/RS-422MAX490ESA+72CLM490EESA+SOIC-8低功耗、限摆率、RS-485/RS-422MAX490EESA+73CLM490CPA+DIP-8低功耗、限摆率、RS-485/RS-422MAX490CPA+74CLM490ECPA+DIP-8低功耗、限摆率、RS-485/RS-422MAX490ECPA+75CLM490EPA+DIP-8低功耗、限摆率、RS-485/RS-422MAX490EPA+76CLM490EEPA+DIP-8低功耗、限摆率、RS-485/RS-422MAX490EEPA+77CLM488CSA+SOIC-8低功耗、限摆率、RS-485/RS-422MAX488CSA+78CLM488ECSA+SOIC-8低功耗、限摆率、RS-485/RS-422MAX488ECSA+79CLM488ESA+SOIC-8低功耗、限摆率、RS-485/RS-422MAX488ESA+80CLM488EESA+SOIC-8低功耗、限摆率、RS-485/RS-422MAX488EESA+产品手册序号产品型号封装形式产品概述兼容型号81CLM488CPA+DIP-8MAX488CPA+82CLM488ECPA+DIP-8MAX488ECPA+83CLM488EPA+DIP-8MAX488EPA+84CLM488EEPA+DIP-8MAX488EEPA+85CLM232CSE SOIC-16MAX232CSE+T86CLM232ECSE SOIC-16MAX232ECSE+87CLM232ESE SOIC-16MAX232ESE+T88CLM232EESE SOIC-16MAX232EESE+T89CLM232CPE DIP-16MAX232CPE+90CLM232ECPE DIP-16MAX232ECPE+91CLM232EPE DIP-16MAX232EPE+92CLM232EEPE DIP-16MAX232EEPE+93CLM232CWE SOIC-16MAX232CWE+T94CLM232ECWE SOIC-16MAX232ECWE+T95CLM232EWE SOIC-16MAX232EWE+T96CLM232EEWE SOIC-16MAX232EEWE+T97CLM232ACWE SOIC-16MAX232ACWE+T98CLM232AEWE SOIC-16MAX232AEWE+99CLM3232CSE SOIC-16MAX3232CSE+T 100CLM3232ECSE SOIC-16MAX3232ECSE+T05产品手册06序号产品型号封装形式产品概述兼容型号101CLM3232ESE SOIC-16MAX3232ESE+T 102CLM3232EESE SOIC-16MAX3232EESE+T 103CLM1302S SOIC-8DS1302S+T&R 104CLM1302SN+SOIC-8DS1302SN+T&R 105CLM1302Z+T SOIC-8DS1302Z+T&R 106CLM1302ZN+SOIC-8DS1302ZN+T&R 107CLM1302+DIP-8DS1302+108CLM1302N+DIP-8DS1302N+109CLM307Z+SOIC-8DS1307Z+T&R 110CLM1307ZN+SOIC-8DS1307ZN+T&R 111CLM1307+DIP-8DS1307+112CLM1307N+DIP-8DS1307N+113CLM4717EUB+MSOP-10拟开关MAX4717EUB+114CLM231N/NOPB DIP-8LM231N/NOPB 115CLM231AN/NOPB DIP-8LM231AN/NOPB 116CLM331N/NOPB DIP-8LM331N/NOPB 117CLM331AN/NOPB DIP-8LM331AN/NOPB 118CLM298N Multiwatt-15L298N 119CLM298P POWERSO-20L298P 120CLM2543CDW SOIC-20TLC2543CDW产品手册07序号产品型号封装形式产品概述兼容型号121CLM2543IDW SOIC-20TLC2543IDW 122CLM2543CDB SSOP-20TLC2543CDB 123CLM2543IDB SSOP-20TLC2543IDB 124CLM2543CN DIP-20TLC2543CN 125CLM2543IN DIP-20TLC2543IN 126CLM1543CDW SOIC-20TLC1543CDW 127CLM1543IDW SOIC-20TLC1543IDW 128CLM1543CN DIP-20TLC1543CN 129CLM1543IN DIP-20TLC1543IN 130CLM5615CDGK VSSOIC-8趋稳时间为12.5us并具备上电复位功能的10位、单通道、低功耗DAC TLC5615CDGK 131CLM5615IDGK VSSOIC-8趋稳时间为12.5us并具备上电复位功能的10位、单通道、低功耗DAC TLC5615IGGK 132CLM5615CD SOIC-8趋稳时间为12.5us并具备上电复位功能的10位、单通道、低功耗DAC TLC5615CD 133CLM5615ID SOIC-8趋稳时间为12.5us并具备上电复位功能的10位、单通道、低功耗DAC TLC5615ID 134CLM5615CP DIP-8趋稳时间为12.5us并具备上电复位功能的10位、单通道、低功耗DAC TLC5615CP 135CLM5615IP DIP-8趋稳时间为12.5us并具备上电复位功能的10位、单通道、低功耗DAC TLC5615IP 136CLM3616-00SOP-14IW3616-00137CLM3616-01SOP-14IW3616-01138CLM3617-00SOP-14IW3617-00139CLM3617-01SOP-14IW3617-01140CLM3630-00SOP-14IW3630-00产品手册序号产品型号封装形式产品概述兼容型号141CLM1100-0001BGA-128ASIC从站控制ET1100-0001142CLM1100-0002BGA-128ASIC从站控制ET1100-0002143CLM1100-0003BGA-128ASIC从站控制ET1100-0003144CLM1200-0001QFN-48ASIC从站控制ET1200-0001145CLM1200-0002QFN-48ASIC从站控制ET1200-0002146CLM1200-0003QFN-48ASIC从站控制ET1200-0003147CLM8656ARZ SOIC-8AD8656ARZ148CLM8656ARMZ MSOIC-8AD8656ARMZ149CLM1040T/CM,118SOIC-8TJA1040T/CM,118 150CLM1042T/CM,118SOIC-8TJA1042T/CM,118 151CLM1050T/CM,118SOIC-8TJA1050T/CM,118 152CLM1051T/CM,118SOIC-8TJA1051T/CM,118 153CLM82C250T/YM SOIC-8PCA82C250T/YM 154CLM82C251T/YM SOIC-8PCA82C251T/YM 155CLMEE80C196KC20PLCC-68EE80C196KC20 156CLMEN80C196KC20PLCC-68EN80C196KC20 157CLMN80C196KC20PLCC-68N80C196KC20 158CLMTN80C196KC20PLCC-68TN80C196KC20 159CLMEE87C196KC20PLCC-68EE87C196KC20 160CLMEN87C196KC20PLCC-68EN87C196KC2008产品手册09序号产品型号封装形式产品概述兼容型号161CLMN87C196KC20PLCC-68N87C196KC20162CLMTN87C196KC20PLCC-68TN87C196KC20163CLM8051F020-GQ TQFP-100C8051F020-GQ 164CLM8051F021-GQ TQFP-64C8051F021-GQ 165CLM8051F330-GM VFQFN-20C8051F330-GM 166CLM8051F500-IQ TQFP-48C8051F500-IQ 167CLM8051F500-IM VFQFN-48C8051F500-IM 168CLM8051F502-IQ LQFP-32C8051F502-IQ 169CLM8051F502-IM QFN-32C8051F502-IM170CLM08D1500CIYB/NOPB HLQFP-128ADC08D1500CIYB/NOPB 171CLM083000CIYB/NOPB HLQFP-128ADCADC083000CIYB/NOPB 172CLM10AQ190AVTPY EBGA-38010位5GSPS ADC EV10AQ190AVTPY 173CLM9680BCPZ-1250LFCSP-64双通道14位1GSPS ADC AD9680BCPZ-1250174CLM9739BBCZ BGA-16014位、2.5 GSPS、RF数模AD9739BBCZ 175CLM9779ABSVZ TQFP-100双通道16位1GSPS DAC AD9779ABSVZ 176CLM12DS130AVZPY FPBGA-19612位3GSPS DAC EV12DS130AVZPY 177CLM12DS460AVZP FPBGA-19612位6.4GSPS DAC EV12DS460AVZP 178CLM9434BCPZ-370LFCSP-5612位370MSPS ADC AD9434BCPZ-370179CLM9434BCPZ-500LFCSP-5612位500MSPS ADC AD9434BCPZ-500180CLM4149IRGZTVQFN-4814位250MSPS ADCADS4149IRGZT产品手册10序号产品型号封装形式产品概述兼容型号181CLM9467BCPZ-200LFCSP-7216位200MSPS ADC AD9467BCPZ-200182CLM9467BCPZ-250LFCSP-7216位250MSPS ADC AD9467BCPZ-250183CLM9656BCPZ-125LFCSP-56四通道16位125MSPS ADC AD9656BCPZ-125184CLM9245BCPZ-40LFCSP-3214位40MSPS ADC AD9245BCPZ-40185CLM9245BCPZ-65LFCSP-3214位65MSPS ADC AD9245BCPZ-80186CLM9245BCPZ-80LFCSP-3214位80MSPS ADC AD9245BCPZ-80187CLM9783BCPZ LFCSP-72双通道16位500MSPS DAC AD9783BCPZ 188CLM7656BSTZ-REEL LQFP-64六通道16位250KSPS ADC AD7656BSTZ-REEL 189CLM7960BCPZLFCSP-3218位2MSPS ADC AD7960BCPZ190CLM128S102CIMTX/NOPB TSSOP-1612位1MSPS ADC ADC128S102CIMTX/NOPB 191CLM5638IDR SOIC-8DACTLV5638IDR 192CLM7606BSTZ LQFP-64AD7606BSTZ 193CLM9625BBPZ-2.5BGA-19612位2.6GSPS ADC AD9625BBPZ-2.5194CLM9164BBCZ BGA-16516位12GSPS DAC AD9164BBCZ 195CLM9154BCPZ LFCSP-88四通道16位2.4GSPS DAC AD9154BCPZ 196CLM2160IUK#PBF QFN-4816位25MSPS ADC LTC2160IUK#PBF 197CLM9652BBCZ-310BGA-144双通道16位310MSPS ADC AD9652BBCZ-310198CLM7779ACPZ-RL LFCSP-6424位16KSPS ADC AD7779ACPZ-RL 199CLM9208BBPZ-3000BGA-196双通道14位3GSPS ADCAD9208BBPZ-3000200CLM320VC33PGE120LQFP-144TMS320VC33PGE120产品手册序号产品型号封装形式产品概述兼容型号201CLM320VC33PGEA120LQFP-144TMS320VC33PGEA120 202CLM320VC33PGE150LQFP-144TMS320VC33PGE150203CLM320VC5402PGE100LQFP-144TMS320VC5402PGE100 204CLM320F28335PGFA LQFP-176TMS320F28335PGFA205CLM320LF2406APZA LQFP-100TMS320LF2406APZA206CLM320LF2406APZS LQFP-100TMS320LF2406APZS207CLM320LF2407APGES LQFP-144TMS320LF2407APGES208CLM320LF2407APGEA LQFP-144TMS320LF2407APGEA 209CLM320C6713BPYP200HLQFP-208TMS320C6713BPYP200 210CLM320C6713BZDP225BGA-272TMS320C6713BZDP225 211CLM320C6713BGDP225BGA-272TMS320C6713BGDP225 212CLM320C6713BZDP300BGA-272TMS320C6713BZDP300 213CLM320C6713BGDG300BGA-272TMS320C6713BGDP30011邮箱：*******************。
海信 LTDN65XT910UCHK 使用说明书
LTDN65XT910UCHK产品使用说明书请在使用本机之前，仔细阅读并保留备用海信香港网址 ｗｗｗ．ｈｉｓｅｎｓｅ．ｃｏｍ．ｈｋ 海信社区 ｗｗｗ．ｈｉｓｍａｒｔｔｖ．ｃｏｍ温馨提示 您好！在使用本产品前请您认真阅读产品使用说明书，并妥善保管。
因违反本手册中安全注意事项及使用说明事项而导致的事故，本公司不承担任何责任。
本产品内有高压，用户不得擅自打开机壳。
非维修人员，不得擅自修理和换件，以免发生触电和火灾事故。
请用干净、柔软的綿布对整机进行清洁维护，禁止反复用力擦拭。
禁止用硬物划刻、敲打、撞击或用各种研磨类物品摩擦显示屏。
本产品在安放、使用时应避免受到水滴、水溅。
遇到雷雨等不良天气，应迅速拔下电源插头及有线电视（或室外天线）插头，以免发生雷击损坏事故。
静止图像可能会导致电视屏幕永久性损坏。
１ 不要在液晶电视屏幕上显示静止图像超过２小时，因为这样会导致出现屏幕图像残影，为避免此问题请您在显示静止图像时降低屏幕的亮度和对比度。
２ 长时间观看４：３格式的节目时，在屏幕的左、右两侧和图像的边缘会留下不同的痕迹，所以请您不要长时间使用此模式。
３ 显示电子游戏和电脑静止图像的时间过长，可能会导致局部余像，出现因荧光屏灼伤而造成的屏幕图像残影，所以请您在使用时适当降低亮度和对比度。
上述原因导致的电视机屏幕出现图像残影、局部余像、痕迹问题，显示屏不在保修范围之内。
本机为I 类设备，应当连接到带保护接地连接的电网电源输出插座上。
更多产品功能介绍，您可以参见电视机内置特色应用指南。
节能提示：１ 在不观看电视节目时请选择交流关机（通过电视机电源开关关机），以减少能耗。
２ 在不影响观看质量的前提下，可降低显示屏的亮度以减少电视机在使用过程中的能耗。
使用本产品前请详细阅读下列事项：带闪电箭头的三角形图案为警告符号，提醒您注意产品内的电压有危险。
√表示正确的做法。
带惊叹号的三角形图案为警告符号，提醒您注意与产品有关的重要说明。
FAIRCHILD FQPF9N50CF 500V N-Channel MOSFET 说明书
现货库存、技术资料、百科信息、热点资讯，精彩尽在鼎好!FQPF9N50CF 500V N-Channel MOSFETNOTES:1. Repetitive Rating : Pulse width limited by maximum junction temperature2. L = 8mH, I AS = 9A, V DD = 50V, R G = 25 Ω, Starting T J = 25°C3. I SD ≤ 11A, di/dt ≤ 200A/µs, V DD ≤ BV DSS, Starting T J = 25°C4. Pulse Test : Pulse width ≤ 300µs, Duty cycle ≤ 2%5. Essentially independent of operating temperature * Current limited by maximum junction temperatureV GS(th)Gate Threshold VoltageV DS = V GS , I D = 250 µA 2.0-- 4.0V R DS(on)Static Drain-Source On-Resistance V GS = 10 V, I D = 4.5 A--0.700.85Ωg FS Forward Transconductance V DS = 40 V, I D = 4.5 A (Note 4)-- 6.5--S Dynamic CharacteristicsC iss Input Capacitance V DS = 25 V, V GS = 0 V, f = 1.0 MHz--7901030pF C oss Output Capacitance--130170pF C rss Reverse Transfer Capacitance --2430pF Switching Characteristicst d(on)Turn-On Delay Time V DD = 250 V, I D = 9A,R G = 25 Ω(Note 4, 5)--1845ns t r Turn-On Rise Time --65140ns t d(off)Turn-Off Delay Time --93195ns t f Turn-Off Fall Time --64125ns Q g Total Gate Charge V DS = 400 V, I D = 9A,V GS = 10 V(Note 4, 5)--2835nC Q gs Gate-Source Charge --4--nC Q gd Gate-Drain Charge--15--nC Drain-Source Diode Characteristics and Maximum RatingsI S Maximum Continuous Drain-Source Diode Forward Current ----9*A I SM Maximum Pulsed Drain-Source Diode Forward Current ----36*A V SD Drain-Source Diode Forward Voltage V GS = 0 V, I S = 9 A---- 1.4V t rr Reverse Recovery Time V GS = 0 V, I S = 9 A,dI F / dt = 100 A/µs (Note 4)--100--ns Q rrReverse Recovery Charge--0.3--µCResistive Switching Test Circuit & WaveformsUnclamped Inductive Switching Test Circuit & WaveformsDISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:1. Life support devices or systems are devices or systems which,(a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONSDefinition of TermsDatasheet Identification Product Status DefinitionAdvance Information Formative or InDesign This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.Preliminary First Production This datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to makechanges at any time without notice in order to improvedesign.No Identification Needed Full Production This datasheet contains final specifications. FairchildSemiconductor reserves the right to make changes atany time without notice in order to improve design.Obsolete Not In Production This datasheet contains specifications on a productthat has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.Rev. I17。
iC5变频器中文说明书
iC5变频器中文说明书重要说明感谢您选购LG变频调速器～操作防范(1) 维护与安装, 按照产品的重量处理。
, 堆放变频器包装箱数量不要超过规定数目。
, 按照本手册的指令规范安装。
, 交货期间不要打开外壳。
, 不要放置重物在变频器上。
, 检查变频器的装箱方向是否正确。
, 不要使变频器受到摔跌或挤压。
, 对于200V级变频器，使用3类接地方式(接地电阻<100Ω)。
, 检查或安装时，在触摸印刷电路板前注意保护措施(静电放电)。
, 在下列环境条件下使用变频器:环境温度 - 10 ~ 50 ? (无冰冻)湿度 90% RH 或更低 (无凝露)环境储存温度 - 20 ~ 65 ?安装场所无腐蚀性气体，可燃性气体，油雾或灰尘 2海拔, 振动最大海拔高度 1,000m 以下,最大 5.9m/sec (0.6G) 或更低i SV-iC5重要说明(2) 接线, 不要安装电力电容器，浪涌抑制器，或RFI滤波器在变频器的输出侧。
, 连接到电机的输出电缆(U， V， W) 的连接方式将会影响到电机的旋转方向。
, 不正确的端子接线可能引起设备的损坏。
, 端子的正负极接反可能会损坏变频器。
, 只有受过专业培训的人才可以对变频器进行接线和检查。
, 先安装变频器再进行接线，否则，你可能受到电击或人身伤害。
(3) 试运行, 在运行前检查所有参数，根据负载类型修改参数值。
, 始终在本说明书标定的电压范围内使用，否则，可能导致变频器损坏。
(4) 操作防范, 当选择自动重启动功能时，由于电机会在故障停止后突然再启动，所以应远离设备。
, 操作面板上的“STOP”键仅在相应功能设置已经被设定时才有效，特殊情况应准备紧急停止开关。
, 如果故障复位是使用外部端子进行设定，将会发生突然启动。
请预先检查外部端子信号是否处于关断位，否则可能发生意外事故。
, 不要修改或变动变频器内部任何东西。
, 变频器的电子热保护功能可能无法保护电机。
, 在变频器的输入侧不要使用电磁式交流接触器作为变频器频繁启停的开关。
HT90C技术参数表(TDS)
贮存条件 产品应该保存在一个凉爽干燥、温度为 8~25℃
的密闭塑料桶内。贮存温度最好是 8~15℃。为了防 止未使用产品被污染，规定不允许将任何东西倒回原 装塑料桶中。遇到特殊情况，请咨询技术中心。
HT-90C 是一种活性浸渗胶，在要求温度下可长 期存放，可通过控制温度延长贮存时间。不允许持续 暴露在紫外光下，要求通风。
产品技术数据表
HT90C Technical Data Sheet
产品介绍：
HT-90C 浸渗胶产品性能如下：
化学类型
甲基丙烯酸酯
固化方式
热固化
外观
琥珀色透明液体
组分
单组份黏度Fra bibliotek低黏度
HT-90C 是一种适用于浸渗多孔金属材料的水 洗性热固化密封胶。在 90℃条件下，它通过自由基 聚合固化形成坚韧的热固性胶体，对多孔金属材料起
HT90C TDS 文件 第1页共2页
声明 本文中的数据仅供参考，是可靠的。回天公司对
我们无法控制的方法得到的任何结果概不负责。用户 有责任确定本产品的适用性，并采取适当措施以防止 本产品在贮存和使用过程中可能发生的损失和人身 伤害。建议用户在使用本产品前进行试验，以验证是 否满足使用要求。
湖北回天胶业股份有限公司 电话：（86）710 3626888-8116 邮编：441003
地址：湖北襄樊市国家高新技术开发区航天路 7 号 传真：（86）710 3620881 网址：
HT90C TDS 文件 第2页共2页
1.03 12 ＞93 凝胶 10 6
固化性能 外观 密度 硬度(邵 A) 使用温度
耐介质性能
带或不带一些裂缝的透明塑料 1.2 g/ml 76
-55℃ to 150℃
Samsung 7.5 ft
DVG50A8800VSamsung 7.5 cu. ft. Smart Dial Gas Dryer with Super Speed Dry19 Preset Drying Cycles:Refresh, Wrinkle Away, Steam Sanitize, SuperSpeed, Eco Normal, Normal, Heavy Duty, Towels, Permanent Press, Activewear, Bedding, Delicates,Wool, Shirts, Denim, Time Dry, Air Fluff, Quick Dry,Rack Dry14 Options:Mixed Load Bell, Wrinkle Prevent, AntiStatic,My Cycle, Smart Control, Eco Dry, Drum Light, Child Lock, Alarm, AI Pattern, Wi-Fi, Language, Vent Blockage Test, Factory Reset5 Temperature Settings:High, Medium, Medium Low, Low, Extra Low5 Dry Levels:Very Dry, More Dry, Normal Dry, Less Dry, Damp Dry WarrantyOne (1) Year Parts and LaborProduct Dimensions & Weight (WxHxD) Dimensions: 27" x 383/4" x 315/16"Weight: 123 lbsShipping Dimensions & Weight (WxHxD) Dimensions: 293/8" x 429/16" x 3411/16"Weight: 130 lbs Gas Dryer Model # UPC Code Brushed Black DVG50A8800V887276521565 Electric DryerBrushed Black DVE50A8800V887276517735 Matching WasherBrushed Black WF50A8800AV887276519012 Optional AccessoriesPedestal WE402NV887276310145 Riser WE272NV887276197630 MultiControl™DV-MCK887276528953 Stacking Kit SKK-8K887276344034 Vent Kit DV-2A887276146416 Gas to PropaneConverter Kit LPKIT-4887276352787 Features• AI Powered Smart Dial• Super Speed Dry• Steam Sanitize+• CleanGuard™• Wi-Fi Connectivity1• MultiControl™• ENERGY STAR® Certified•S ensor Dry•V ent Sensor• L arge 7.5 cu. ft. Capacity• Interior Drum Light• Reversible Door• Lint Filter Indicator• ADA Compliant2• Stainless Steel Drum• 19 Preset Drying Cycles• 14 Options• 5 Temperature Settings• 9 Timed Dry Settings• 3-Way VentingConvenience• Child Lock• Filter Check IndicatorElectrical Requirements120 V / 60 Hz15 AmpsBrushed BlackAvailable Color1R equires wireless network, Samsung account and Samsung SmartThings App. The Samsung Smart Things App supports Android OS 4.0 (ICS) or later which is optimized for Samsung smartphones (Galaxy S and Galaxy Note series). This app also supports iOS 7 or later for iPhone models. Samsung SmartThings App available in App Store and Play Store.2ADA Compliant when using 27" wide riser. (Riser model codes: WE272NV, WE272NW, WE272NC)DVG50A8800VSamsung 7.5 cu. ft. Smart Dial Gas Dryer with Super Speed DryAlcove or closet installationMinimum clearance forcloset and alcove installations:Recessed AreaSide View Confined331/2"27"52"383/4"5413/16"Depth with door open 90°1"Depth including washer clearance1"1"515/16"1"331/2"1"Connection DimensionsBack and side view of dryerActual color may vary. Design, specifications,and color availability are subject to change without notice. Non-metric weights and measurements are approximate.©2021 Samsung Electronics America, Inc., 85 Challenger Road, Ridgefield Park, NJ 07660. Tel: 800-SAMSUNG. . Samsung is a registered trademark of Samsung Electronics Co., Ltd.LEGEND:• Cold Water Connection •Gas Connection17/8" 65/16" - Hot Water 101/4"- Cold Water 333/8" 147/8" 61/8" 411/2" 453/4" 42 5/8"Gas DryeronlyDepth including washer clearance1"515/16" 331/2" Closet or DoorArea:24 in.23"1"1"781/2" 529/16"Depth with door open 90°37/8" 17/8"213/16" 315/16" 7"147/8"61/8"17/8"65/16" - Hot Water 101/4"- Cold Water 333/8" 147/8" 61/8" 411/2" 453/4" 42 5/8"Gas Dryer onlyDepth including washer clearance 1" 515/16" 331/2" Closet or Door Area:24 in.23"11"1"781/2" 529/16" Depth with door open 90° 37/8" 213/16" 315/16" 7" 71/8"Installation Specifications – Side-by-Side or Stand-AloneIf the washer and dryer are installed together or the dryer alone, the closet front must have two unobstructed airopenings for a combined minimum total area of 72-inch 2. Your washer alone does not require a specific air opening.DimensionsRequired dimensions forinstallation with pedestal:27"315/16"52"383/4"529/16"Depth with door open 90°DVG50A8800V Samsung 7.5 cu. ft. Smart Dial Gas Dryer。
NT90RHBOAC12VCB0.6中文资料
FeaturesSmall size, light weight. Low coil power consumption, heavy contact load. Strong anti-shock and anti-vibration, high reliability, long life.Suitable for automobile, machine, electronic equipment, air conditioner and household appliance applications.PC board mounting.Ordering InformationNT90 R H A S DC12V C B 0.91 2 3 4 5 6 7 8 91 Part number ：NT90T 、NT90T 22 Terminal ： R: without Pin 6；NIL: With Pin 63 Load ：H:30A ；N:40A4 Contact arrangement ：1A:1A ；1B:1B ；1C:1C5 Enclosure ：S: Sealed type ；D: Dust cover ；E: Covered ；O: Open type6 Coil rated Voltage(V)：AC:12,24,110,120,220DC:3,5,6,9,12,15,18,24,48,1107 Contact material ：C: Ag CdO ；S: Ag SnO 28 Resist heat class ：B:130℃ F:155℃9 Coil power consumption ：0.6:0.6W ；0.9:0.9W NIL:2VA Contact DataContact Arrangement1A SPSTNO f 1B(SPSTNC)f 1C(SPDT(B-M))Contact MaterialAg CdO Ag SnO 2 Ag SnO 2 In 2O 3Contact Rating (resistive)NO : 30A/240VAC,14VDC; NC:20A/240VAC ;30A/14VDC NO ：40A/250VAC,30VDC; NC:30A/250VAC,30VDC (0.9W)Motor load ：2HP 250VAC ；1.5HP 250V Lamp load ：TV-5Max. Switching Power1100W 7200VA Max. Switching Voltage110VDC 250VAC Max. Switching Current:40A Contact Resistance or Voltage drop አ30m Item 3.12 of IEC255-7Electrical 105Item 3.30 of IEC255-7Operation life Mechanical107Item 3.31 of IEC255-7Coil ParameterAC Coil ParameterRATED VOLTAGEVACDASH NUMBERSRATEDMaxCOIL RESISTANCE ±10%PICK UP VOLTAGE VAC(max)(75%of rated voltage)RELEASE VOLTAGE VAC(min)(30%of rated voltage)COIL POWEROperate Time ms Release Time ms012AC 1215.6279.0 3.6024AC 2431.212018.07.2110AC 110143236082.533.0120AC 120156304090.036.0220AC22028613490165.066.02VA __CAUTION : 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.2.Pickup and release voltage are for test purposes only and are not to be used as design criteria.10330.5×24.2×17 32.5×27.6×20.5 99312549.2 01311661.4元器件交易网003-9003 3.9102.250.3005-9005 6.5283.750.5006-90067.8404.500.6009-900911.790 6.750.9012-9001215.61609.00 1.2015-9001519.525010.25 1.5018-9001823.436013.50 1.8024-9002431.264018.00 2.4048-9004862.4256036.00 4.8110-9001101431344582.5011.00.91510003-6003 3.915 2.250.3005-6005 6.542 3.750.5006-60067.860 4.500.6009-600911.7135 6.750.9012-6001215.62409.00 1.2015-6001519.537510.25 1.5018-6001823.454013.50 1.8024-6002431.296018.00 2.4048-6004862.4384036.00 4.8110-6001101432016782.5011.00.61510CAUTION : 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.2.Pickup and release voltage are for test purposes only and are not to be used as design criteria.Qualification inspection:Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24.Operation conditionInsulation Resistance 1000M min (at 500VDC)Item 7 of IEC255-5Dielectric Strength Between contactsBetween contact and coil 50Hz 1500V 50Hz 2500V 4000V without Pin 6 Item 6 of IEC255-5Item 6 of IEC255-5Shock resistance 200m/s 2 11msIEC68-2-27 Test Ea Vibration resistance 10~55Hz double amplitude 1.5mm IEC68-2-6 Test Fc Terminals strength 10NIEC68-2-21 Test Ua1Solderability235 x 2 3x 0.5s IEC68-2-20 Test Ta method 1Ambient Temperature -55~100 -55~125 Relative Humidity 85% (at 40 )IEC68-2-3 Test CaMass27g Open type 30g元器件交易网。
Quinte系列控制器商品说明书
MODELSQTC100QTC200QTC300KITAGAWA NC CONTROLLERQUINTE•ADVANCED INTEGRATED PROGRAMMING AND OPERATING SYSTEM (IPOS MODE)Direct control of Quinte seriescontrollers with host computers(CNC, NC, etc.) through RS-232CSerial Port.•M-SIGNAL MODE OPERATIONIndexing, Zero Return, etc. from the machine control with one M Signal interfaced.•POWERFUL DRIVING TORQUEA maintenance free AC Servo Motor with absolute encoder, provides powerful driving torque.•MEMORY CARD SLOTData (programs, parameters, etc.)input & output with memory Card.•PRECISE INDEXINGMinimum resolution of 0.0001˚•HIGH SPEED TABLE ROTATION High speed indexing with AC Servo Motor •FULL DIGITAL SERVO CONTROL Guarantees superb indexingaccuracy and stable performance.•DUST & WATER PROOF CONTROL BOX (IP53)•PLENTY OF PROGRAMMING SPACE Large programming capacity of max. 9,999 partitions / max. 2,000blocks per partitionITEMName of FunctionDescription of Function1Servo MotorsAC Servo Motor with Absolute Encoder2M - Signal Mode Operation Easy Interface with the Machine Control for M - SignalOperation with One M Code3Minimum Resolution 0.0001 Degrees4Max. Programmable Angle 9,999 Rotations + 360 Degree or ±359.9999 Degrees 5Number of Divisions 0 - 9,9996Program Capacity Max 9,999 Partitions / Max 2,000 Blocks per Partition 7Input Method MDI Keyboard 8Command Method Incremental (G91) / Absolute (G90)9Zero Return *Establishes both Machine and Work Origin 10Manual Feed Rapid, Fine and Step Feed 11Emergency Stop *Stops All Functions 12Feed Hold *Stops Table Rotation Temporarily 13Sub Program Command M98 / M9914Repeat Function Repeats between Programs specified 15Buffer Function Reads One Block Ahead and Operates Continuously 16G Function Dwell, Brake On/Off, etc. (G04 - G92)17Uni-directional Function Positioning from One Direction (CW or CCW) only 18Software Limit Function Setting Value of Software Limit from Machine Origin 19Stop Over-shooting Prevents Over-shooting from the Preset Position20MMC SlotData (Programs, Parameters, Etc.) Input & Output withMemory Card21Alarm No. Display Function Display Alarm Code No. & Description 22Self Diagnosis Function Displaying Current Condition of Controller 23Feed Override 1 - 200%24External Input Signal Start, Emergency Stop, Feed Hold, etc.25External Output Signal One Block Finish, Finish, Alarm Output, etc.26Display TFT Color LCD 480 x 272 Resolution27Power Input AC200-230V , 50/60HzSingle Phase or 3-Phase for Models QTC100 & QTC2003-Phase for Model QTC300KITAGAWA NC CONTROLLERQUINTEFUNCTIONS。
好盈电调中文使用说明书
感谢您购买本产品！无刷动力系统功率强大，错误的使用可能造成人身伤害和设备损坏。
为此，我们强烈建议您在使用设备前仔细阅读本说明书，并严格遵守规定的操作程序。
我们不承担因使用本产品而引起的任何责任，包括但不限于对附带损失或间接损失的赔偿责任；同时，我们不承担因擅自对产品进行修改所引起的任何责任。
我们有权在不经通知的情况下变更产品设计、外观、性能及使用要求。
产品特色：✓全球首创“锂电平衡放电保护”功能，实时监测每个锂电单体的放电情况，一旦单体达到保护电压阈值即采取相应保护措施，有效防止电池组损坏，降低玩家消费支出（备注：仅“守护神”系列无刷电调具有本功能）✓首创开机奏乐功能，炫出您的个性。
（选配编程设定卡后，您可以从15首乐曲中任选一首写入电子调速器，也可以关闭奏乐功能）✓采用超低阻抗PCB（印刷线路板），具有极强的耐电流能力。
✓电源输入端采用日本名牌超低阻抗大容量电容，大大提升电源稳定性，同时对电池具有保护作用。
✓具备电压保护/过热保护/油门信号丢失保护等多重保护功能，有效延长电调使用寿命。
✓具有普通启动/柔和启动/超柔和启动三种启动模式，适用于固定翼飞机及直升机。
✓可设定油门行程，兼容市面上所有遥控器。
具备平滑、细腻的调速手感，一流的调速线性。
✓微处理器采用独立的稳压IC 供电，而不是从BEC输出取电，具有更好的抗干扰能力，大大降低失控的可能性。
✓最高转速可以达到210000 RPM（2极马达）、70000 RPM（6极马达）、35000 RPM（12极马达）。
✓具备完整的自主知识产权，产品可持续升级更新，用户更可以享受原厂软件升级服务。
✓配合小巧易携带的编程设定卡（注：选配件），具有简单直观的界面，使您随时随地修改各项编程参数。
（详见设定卡说明书）模型飞机用无刷电机电子调速器产品规格：接线示意图：锂电平衡放电监测保护接头示意图：各个厂家推出的锂电池配备有不同的平衡充电接口，因此我们提供了两种平衡放电监测保护接头供用户选用： 平衡放电监测保护接头（类型一）： 平衡放电监测保护接头（类型二）：适用于台湾亚拓等品牌锂电池 适用于Ployquest 、E-tec 、Thunder Pwer 等品牌锂电池产品功能简要说明：1. 刹车设定：无刹车/有刹车，出厂默认值为无刹车。
Philips HR7955 01 电子炖锅操作指南说明书
Avance Collection900瓦7 档速度和暂动功能方便的 6 合 1 设置HR7955/01无与伦比的效果，贴心设计，便于使用蛋糕、面包、比萨饼、小甜饼、冰昔、汤等等呈现全新美食的飞利浦厨房料理机 - 无与伦比的性能和多功能性，贴心设计，便于使用！无可比拟的和面、搅拌、搅打效果强劲的 900 瓦马达带来始终如一、无可比拟的效果行星式搅拌动作，充分混合原料4 升金属碗，可揉制多达 1300 克面团7 档速度控制和暂动功能，操控自如金属和面钩、打蛋器和搅拌器具有卓越的性能贴心设计，便于使用易于清洁，弧边设计，覆盖铰接升降式和面棒，提供了完全的加工杯入口，便于使用可快速释放的吸脚，便于轻松提起和移动产品亮点强劲的 900瓦马达强劲的 900 瓦马达带来始终如一、无可比拟的效果。
行星式搅拌动作行星式搅拌动作允许和面、搅拌和搅打工具以特别的方式向后和向前运动，而不只是简单的打圈，因而可以触及加工杯的所有角落，制作出光滑、混合均匀的食品。
7档速度控制和暂动功能多档速度和暂动功能，可实现全面控制和制作丰富多样的食品。
带手柄的 4升金属碗坚实耐用的 4 升大金属碗可以舒适地揉制多达1300 克面团，让您可以一次制作多达 4 个 12 英寸的比萨饼或 2 条面包。
金属手柄便于携带和倾倒。
防溅保护盖可避免使用过程中发生飞溅。
结实耐用的金属碗用具金属和面钩、搅拌器和打蛋器只需旋紧即可锁定到位。
专门设计的和面钩可模仿用手和面，从而确保面团光滑、无结块。
更易清洁采用弧边和隐隙设计，清洁轻松便利。
另附可用洗碗机清洗的加工杯和配件。
开放式支臂，更易使用开放式支臂可向上摇摆至实际位置，让您可以轻松安装和拆卸加工杯工具。
单手一推即可关闭。
开放式支臂还为您提供完全的加工杯入口，检查均匀度或添加原料时这是一项非常实用的功能。
可快速释放的吸脚专门设计的可快速释放吸脚，便于轻松拉动和提起。
飞利浦绿色标志飞利浦绿色产品可以降低成本、节省能源和减少二氧化碳排放。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Dimensions
0.130 0.020 (0.146) 0.787max.
mm /inch
0.020
20max.
24.2max. 0.953max.
3.3 0.130
17max. 0.669max.
0.031 0.059 0.027 0.027 0.047 0.047
0.492
2.4 0.094 0.209
0.3 0.5 0.6 0.9 1.2 1.5 1.8 2.4 4.8 11.0
0.6
15
10
CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
12
Time(m s ec)
10 8 6 4
119
0.701
元器件交易网
NHG RELAYS
Coil Parameter
DC Coil Parameter Coil voltage V Rated 003-900 005-900 006-900 009-900 012-900 015-900 018-900 024-900 048-900 110-900 3 5 6 9 12 15 18 24 48 110 Max. 3.9 6.5 7.8 11.7 15.6 19.5 23.4 31.2 62.4 143 Pick up voltage VDC(max) (75% of rated voltage) 2.25 3.75 4.50 6.75 9.00 10.25 13.50 18.00 36.00 82.50 Release voltage VDC(min) (10% of rated voltage) 0.3 0.5 0.6 0.9 1.2 1.5 1.8 2.4 4.8 11.0
27.6max. 1.087max.
0.882
0.787
Open type
0.724 1.279max.
Dimensions
0.150 0.150 0.606 0.303 0.303 0.551 0.350 0.606 0.303 0.303
0.551
0.701
0.043
0.043
0.1
0.606
0.1
T V NO: 40A/240VAC 14VDC NC: 30A/240VAC 14VDC Insulation B-class F-class
CQC NO: 30A/240VAC NC: 20A/240VAC
Insulation
B-class F-class
Reference Data
3 5 6 9 12 15 18 24 48 110
3.9 6.5 7.8 11.7 15.6 19.5 23.4 31.2 62.4 143
15 42 60 135 240 375 540 960 3840 20167
2.25 3.75 4.50 6.75 9.00 10.25 13.50 18.00 36.00 82.50
Dash numbers
Coil resistance 10%
Coil power W
Operate Time ms
Release Time ms
10 28 40 90 160 250 360 640 2560 13445
0.9
15
10
003-600 005-600 006-600 009-600 012-600 015-600 018-600 024-600 048-600 110-600
Qualification inspection:
Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24.
元器件交易网
Coil Parameter
2.Pickup and release voltage are for test purposes only and are not to be used as design criteria.
Operation condition
Insulation Resistance Dielectric Strength Between contacts Between contact and coil Shock resistance Vibration resistance Terminals strength Solderability Ambient Temperature Relative Humidity Mass 1000M min (at 500VDC) Item 7 of IEC255-5 Item 6 of IEC255-5 Item 6 of IEC255-5 IEC68-2-27 T Ea est IEC68-2-6 Test Fc IEC68-2-21 Test Ua1&Ua2 IEC68-2-20 Test Ta method 1 IEC68-2-3 Test Ca 50Hz 1500V 50Hz 2500V 200m/s2 11ms 10~55Hz double amplitude 1.5mm 10N 235 2 3 0.5s -55~100 -55~125 85% (at 40 ) 31g Low profile type 35g
DC Coil Parameter Coil voltage V Rated 003-900 005-900 006-900 009-900 012-900 015-900 018-900 024-900 048-900 110-900 3 5 6 9 12 15 18 24 48 110 Max. 3.9 6.5 7.8 11.7 15.6 19.5 23.4 31.2 62.4 143 Pick up voltage VDC(max) (75% of rated voltage) 2.25 3.75 4.50 6.75 9.00 10.25 13.50 18.00 36.00 82.50 Release voltage VDC(min) (10% of rated voltage) 0.3 0.5 0.6 0.9 1.2 1.5 1.8 2.4 4.8 11.0
元器件交易网
Présente / PreseLAYS
Safety approvals
Safety approval Load UL&CUR NO:40A/240VAC 30A/277VAC NC:30A/240VAC 20A/277VAC 2 HP 250VAC TV-5 1 1 HP 250VAC 2 HP:A 1HP/16AFLA/120VAC 2HP/12AFLA/240VAC B 30LRA/10AFLA/120VAC 30LRA/10AFLA/240VAC Insulation B-class F-class T V NO:40A/240VAC 14VDC NC:30A/240VAC 14VDC Insulation B-class F-class CQC NO:30A/240VAC NC:20A/240VAC
Dash numbers
Coil resistance 10%
Coil power W
Operate Time ms
Release Time ms
10 28 40 90 160 250 360 640 2560 13445
0.9
15
10
003-600 005-600 006-600 009-600 012-600 015-600 018-600 024-600 048-600 110-600
Safety approvals
Safety approval Load UL&CUR NO:40A/240VAC 30A/277VAC NC: 30A/240VAC 20A/277VAC 2HP 250VAC 1 1 HP 250VAC TV-5 2
HP:A 1HP/16AFLA/120VAC 2HP/12AFLA/240VAC B 30LRA/10AFLA/120VAC 30LRA/10AFLA/240VAC
Qualification inspection:
Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24.
121
元器件交易网
NHG RELAYS
0.3 0.5 0.6 0.9 1.2 1.5 1.8 2.4 4.8 11.0
0.6
15
10
CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
Wiring diagram(Bottom view) NOTES 1).Dimensions are in millimeters. 2).Inch equivalents are given for general information only.
Mounting (Bottom view)
Reference Data
3 5 6 9 12 15 18 24 48 110
3.9 6.5 7.8 11.7 15.6 19.5 23.4 31.2 62.4 143
15 42 60 135 240 375 540 960 3840 20167
2.25 3.75 4.50 6.75 9.00 10.25 13.50 18.00 36.00 82.50