WCDMA频段和信道号

5.1.1.1、FDD reference test frequencies for Operating Band I(1920 – 1980 /2110 – 2170 MHz)
5.1.1.2、FDD reference test frequencies for Operating Band II(1850 –1910 /1930 – 1990 MHz )
5.1.1.3、FDD reference test frequencies for Operating Band III(1710 -1785 /1805 - 1880 MHz)
5.1.1.4、FDD reference test frequencies for Operating Band IV(1710 -1755/2110 - 2155MHz)
5.1.1.5、FDD reference test frequencies for Operating Band V(824 - 849/869 - 894MHz)
5.1.1.6、FDD reference test frequencies for Operating Band VI(830 - 840/875 - 885 MHz)
NOTE: For Band VI testing, the Mobile Country Code shall be set to (MCC = '442/443').
1
5.1.1.7、FDD reference test frequencies for Operating Band VII(2500 - 2570/2620 - 2690 MHz)
960MHz)
5.1.1.8、FDD reference test frequencies for Operating Band VIII(880 – 915/925 –
5.1.1.10、FDD reference test frequencies for Operating Band X(1710–1770/2110
–2170MHz)
(1427.9-1452.9/1475.9-1500.9MHz)
2
4.2 Frequency bands
a) UTRA/FDD is designed to operate in either of the following paired bands:
Note: See TS25.307 [26] for Band IV, V,VI, VII, VIII and IX.
b) Deployment in other frequency bands is not precluded.
4.3 TX–RX frequency separation
a) UTRA/FDD is designed to operate with the following TX-RX frequency separation.
b) UTRA/FDD can support both fixed and variable transmit to receive frequency separation.
c) The use of other transmit to receive frequency separations in existing or other frequency bands shall not be precluded.
3
Channel number
The carrier frequency is designated by the UTRA Absolute Radio Frequency Channel Number (UARFCN). For each operating Band, the values of the UARFCN are defined as follows.
Uplink: N U =5 * (F UL– F UL_Offset), for the carrier frequency range F UL_low ≤ F UL ≤ F UL_high
Downlink: N D =5 * (F DL– F DL_Offset), for the carrier frequency range F DL_low ≤ F DL ≤ F DL_high
For each operating Band, F UL_Offset, F UL_low, F UL_high, F DL_Offset,, F DL_low and F DL_high are defined in Table 4.1 for the general UARFCN. For the additional UARFCN, F UL_Offset, F DL_Offset and the specific F UL and F DL are defined in Table 4.1A.
Table 4.1: UARFCN definition (general)
4
Table 4.1a: UARFCN definition (additional channels)
5
4.4.4 UARFCN
The following UARFCN range shall be be supported for each paired band.
Table 4.2: UTRA Absolute Radio Frequency Channel Number
NOTE: If the UE is on a network with Mobile Country Code set to Japan then it may assume that any DL UARFCN sent by the network from the overlapping region of Band V and Band VI is from Band VI. If the UE is on a network
with a Mobile Country Code other than Japan then it may assume that any DL UARFCN sent by the network
from the overlapping region of Band V and Band VI is from Band V.
6
5.1.1.1、FDD reference test frequencies for Operating Band I(1920 – 1980 /2110 – 2170 MHz)
1990 MHz )
5.1.1.2、FDD reference test frequencies for Operating Band II(1850 –1910 /1930 –
5.1.1.8、FDD reference test frequencies for Operating Band VIII(880 – 915/925 –
960MHz)
7。