RP05-243.3SAW中文资料
PQ05RD21中文资料
PQ05RD21 series Low Power-Loss Voltage Regulator
2.0A Output Type, High Cost Performance Low Power-Loss Voltage Regulator
General Description Sharp's PQ05RD21 series is 2.0A output type low power-loss voltage regulator(TO-220). It contributes to energy and space saving of various electronic equipment such as AV, OA equipment.
1
Input
Specific IC 3 GND
2
Output
4 ON/OFF control terminal
Model Line-up 2.0A output
3.3V output 5.0V output 9.0V output 12.0V output
PQ3RD23 PQ05RD21 PQ09RD21 PQ12RD21
*6 Input voltage shall be the value when output voltage is 95% in comparison with the initial value. PQ3RD23:Vin=3.7V *7 In case of opening control teminal 4 , output voltage turns on.
(Internet)
• Data for Sharp's optoelectronic/power devices is provided for internet. ( Address http://www.sharp.co.jp/ecg/)
RP60-243.3SG中文资料
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at info@recom-development.at
January-2007 1
元器件交易网
POWERLINE
DC/DC-Converter
Derating Graph (Ambient Temperature)
RP60-SG Series
RP60-4805SG
125 100 75 Output Power (%) 50 25
Specifications, cont. (typical at nominal input and 25°C unless otherwise noted)
Without Heat-Sink With Heat-Sink
January-2007
元器件交易网
Features
Regulated Converters
● ● ● ● ● ● ● ●
60 Watts Regulated Output Power 2:1 Wide Input Voltage Range 1.6kVDC Isolation (Basic Insulation) Overload and Over Temperature Protection Six-Sided Shield No Derating to 40°C Standard 2” x2” Package and Pinning Efficiency to 90%
瑞典模具钢
X13T6W(236)电渣重溶模具材料详细介绍：X13T6W(236H)电渣重溶模具钢材详细介绍：MEK4/DIN1.8523高耐磨塑胶模具钢详细介绍：高温热作模具用合金BC-3详细介绍：高温热作模具用合金BC-3材料介绍热挤压材料BC-3是一种新型特种合金材料，适应于800℃以上应用的热加工领域。
具有良好的稳定性和耐磨性及红硬性，同时具有优良的抗急冷急热和抗高温氧化性能，在温度650℃时具有良好的综合性能，是一种理想的热挤压材料。
现用于制作有色金属铜及铜金合金的挤压。
其使用寿命比一般热作模具钢可提高五到十倍，并且挤制的产品表面质量好，尺寸精确度高，而且使用寿命长，应用到铜加工行业已有多年的历史。
一、新型特种钢BC-3热挤压材料的主要性能1、机械性能2、持久性能3、蠕变和疲劳性能4抗氧化数据5、长期时效性能热挤压模具是有色金属挤压生产中使用的关键工具，热挤压模具的使用寿命和质量，极大影响着挤压制品的质量、挤压制品表面质量不好，尺寸精度差，因而需要频繁更换模具，生产效率太低，产品成品率低，磨具消耗量大。
我们开发研制的BC-3合金材料已经解决了铜及压的多种难题。
几年来，已经在全国铜挤压领域肿，去得了显著的经济效益和社会效益并充分显示了这种新型材料的显著优越性。
1、提高生产效率BC-3材料使用寿命长。
使用寿命是H13钢的5-10倍，可以为企业减少大量热停修模的时间。
2、提高产品质量BC-3的红硬性高，耐磨性好。
使用中不变形，不氧化，表面光滑不沾铜。
所挤制的产品表面质量好，尺寸精确度高，为拉伸工序和定尺控制提供了良好条件。
消除了使用热作钢模具时的粘铜、划伤等现象。
3、提高产品成品率使用BC-3材料挤压出的铜材表面光洁，成品率高。
4、减低模具费用热挤压生产中，挤压模消耗量大，占生产的比重也高，使用BC-3材料是热作钢模具使用寿命的5-10倍，并且减少大量的模具机加工费用。
其经济效益和社会效益显著。
为实现热挤压产品高产、优质、低耗提供了保证，为有色金属加工业的可持续发展创造了良好的条件。
RP40-FR系列宽输入范围DC DC转换器商品说明书
RP40-11012DFR/P RP40-11024DFR/N-HC RP40-2405SFR/P RP40-2412SFR/N-HCRP40-4805SFR/P-HCFeaturesRegulated Converters• Wide 4:1 Input Voltage Range• 1.6kVDC Isolation for 24Vin and 48Vin, 3kVDC Isolation for 110Vin • Efficiency up to 92%• Six-Sided Continuous Shield• UL60950-1 AM2 Certified, EN50155 CertifiedPD-1REV.: 0/2016DC/DC Converter3 YE A Rw ar r a n t y3DescriptionThe RP40-FR series wide range input DC/DC converters have been especially designed for railway applications and are EN50155 certified. They are also pending to UL60950-1 and cUL 60950-1, this makes them ideal for all high input voltage telecom and industrial applications where approved safety standards are required.40 Watt2“ x 1“Single & Dual OutputRP40-FR Selection GuidePart Number Input Output Output Input (1) Efficiency (1)Max. Capacitive Voltage Range Voltage Current Current typ. Load (2) [VDC] [VDC] [mA] [mA] [%] [µF]RP40-243.3SFR (3,4)9-36 3.3 10000 1528 90 26600RP40-2405SFR (3,4) 9-36 5 8000 1832 91 20000RP40-2412SFR (3,4)9-36 12 3333 1811 92 3900RP40-2415SFR (3,4) 9-36 15 2666 1811 92 2600RP40-2424SFR (3,4)9-36 24 1666 1831 91 1300RP40-483.3SFR (3,4) 18-75 3.3 10000 764 90 26600RP40-4805SFR (3,4)18-75 5 8000 916 91 20000RP40-4812SFR (3,4) 18-75 12 3333 906 92 3900RP40-4815SFR (3,4)18-75 15 2666 906 92 2600RP40-4824SFR (3,4) 18-75 24 1666 915 91 1300 RP40-1103.3SFR (3,4) 43-160 3.3 10000 341 88 26600RP40-11005SFR (3,4) 43-160 5 8000 409 89 20000RP40-11012SFR (3,4)43-160 12 3333 402 90.5 3900RP40-11015SFR (3,4) 43-160 15 2666 400 91 2600RP40-11024SFR (3,4)43-160 24 1666 404 90 1300RP40-2412DFR (3,4) 9-36 ±12 ±1666 926 90 ±2600RP40-2415DFR (3,4)9-36 ±15 ±1333 926 90 ±1600RP40-2424DFR (3,4) 9-36 ±24 ±833 915 91 ±650RP40-4812DFR (3,4) 18-75 ±12 ±1666 463 90 ±2600RP40-4815DFR (3,4) 18-75 ±15 ±1333 370 90 ±1600RP40-4824DFR (3,4)18-75 ±24 ±833 286 91 ±650RP40-11012DFR (3,4) 43-160 ±12 ±1666 204 89 ±2600RP40-11015DFR (3,4) 43-160 ±15 ±1333 204 89 ±1600RP40-11024DFR (3,4)43-160 ±24 ±833 200 91 ±650Model NumberingOrdering ExamplesRP40-2405SFR/P = 24V Input, 5V Output, Positive Logic CTRL pin and Trim pin fitted RP40-2415SFR/N = 24V Input, 15V Output, Negative Logic CTRL pin and Trim pin fitted Input Voltage Output Voltage S ingle or D ualRP40-__ __ _FR/_ _Notes:Note1: Values at nominal input voltage and full load Note2: Test by minimum Vin and constant resistor load.EN50155 Certified UL60950-1 AM2 CertifiedE196683Notes:Note3: standard part is with suffix “P” for positive logic (1=ON, 0=OFF) and trim pin or add suffix “N” instead for negative logic (0=ON, 1=OFF) and trim pin Note4: add suffix “-HC” for premounted Heat-sink with clampsPackage (4)CTRL Logic (3)PD-2REV.: 0/2016DC/DC Conver terRP40-FRSeriesSpecifications (measured @ ta = 25°C, nominal input voltage, full load otherwise noted)DC/DC Conver terSpecifications (measured @ ta = 25°C, nominal input voltage, full load otherwise noted)REGULATIONSParameterConditionValueOutput Voltage Accuracy full load and nominal Vin±1%Voltage Adjustability Single3.3Vout, 5 Vout, 12Vout 15Vout, 24Vout ±10%-10% to +20%Line Voltage Regulation low line to high line at full load ±0.2%Load Voltage Regulation 0% to 100% loadSingle Dual±0.5%±1.0%Cross Regulationasymmetrical 25%<>100% load±5%Transient Response recovery time25% load step change 250µs typ.continued on next pageRP40-FRSeriesPD-3REV.: 0/PD-4REV.: 0/2016DC/DC Conver terSpecifications (measured @ ta = 25°C, nominal input voltage, full load otherwise noted)RP40-FRSeriesDC/DC Conver terSpecifications (measured @ ta = 25°C, nominal input voltage, full load otherwise noted)RP40-FRSeriesPD-5REV.: 0/ Trim up 12345678910%Vout =15.1515.315.4515.6015.7515.9016.0516.2016.3516.50Volts R U = 419.81199.91126.6089.9567.9653.3042.8334.9828.8723.98KOhms Trim up 11121314151617181920%Vout = 16.65016.80016.95017.10017.25017.40017.55017.70017.85018.000Volts R U = 19.9816.6513.8311.429.327.49 5.87 4.43 3.15 1.99KOhms Trim down 12345678910%Vout = 14.85014.70014.55014.40014.25014.00013.75013.50013.25013.000Volts R D =284.89128.6876.6150.5834.9624.5517.1111.537.193.72KOhmsTrim up 12345678910%Vout =24.24024.48024.72024.96025.20025.44025.68025.92026.16026.400Volts R U = 1275.2606.60383.73272.30205.44160.87129.03105.1586.5871.72KOhms Trim up 11121314151617181920%Vout = 26.64026.88027.12027.36027.60027.84028.08028.32028.56028.800Volts R U = 59.5649.4340.8633.5127.1521.5716.6612.298.38 4.86KOhms Trim down 12345678910%Vout = 23.76023.52023.28023.04022.80022.56022.32022.08021.84021.600Volts R D =838.15376.78222.98146.0999.9569.1947.2230.7417.937.68KOhmsRP40-xx15SFRRP40-xx24SFRPROTECTIONSParameterCondition ValueShort Circuit Protection (SCP)continuous, automatic recoveryOver Voltage Protection (OVP)Zener Diode Clamp 3.3Vout 5Vout12Vout15Vout 24Vout3.9VDC 6.2VDC 15VDC 20VDC 30VDCOver Load Protection (OLP)% Iout rated150% typ., Hiccup ModeOver Temperature Protection (OTP)115°C Isolation Voltage24Vin, 48VinI/P to O/PI/P to O/P to Case 1.6kVDC 1.6kVDC 110VinI/P to O/PI/P to O/P to Case3kVDC 1.6kVDC Isolation Resistance 500VDC1G Ω min.Isolation Capacitance1500pF max.Notes:Note6: This power module is not internally fused. An input line fuse must always be used.SAFETY AND CERTIFICATIONSCertificate Type (Safety)Report / File NumberStandard Information Technology Equipment, General Requirements for Safety E196683UL60950-1, 2nd Edition AM:2, 2014CSA C22.2 No. 60950-1-07Railway Applications - Electrical Equipment used on rolling stock15A100702E-CEN50155, 2007EMI ComplianceConditionStandard / CriterionIndustrial, scientific and medical equipment - Radio frequency disturbance characteristics - Limits and methods of measurement (8)with external filter EN50121-3-2, Class A EN55011, Class A or B ESD Electrostatic discharge immunity testRadiated, radio-frequency, electromagnetic field immunity test Fast Transient and Burst Immunity (9)Surge Immunity (9)Immunity to conducted disturbances, induced by radio-frequency fields Power Magnetic Field ImmunityAir ±8kV and Contact ±6kV20 V/m ±2kV ±2kV 10 Vr.m.s100A/m continuous; 1000A/m 1sEN61000-4-2, Criteria A EN61000-4-3, Criteria A EN61000-4-4, Criteria A EN61000-4-5, Criteria A EN61000-4-6, Criteria A EN61000-4-8, Criteria Acontinued on next pagePD-6REV.: 0/2016DC/DC Conver terSpecifications (measured @ ta = 25°C, nominal input voltage, full load otherwise noted)RP40-FRSeriesDC/DC Conver terSpecifications (measured @ ta = 25°C, nominal input voltage, full load otherwise noted)RP40-FRSeriesPD-7REV.: 0/2016PD-8REV.: 0/2016DC/DC Conver terSpecifications (measured @ ta = 25°C, nominal input voltage, full load otherwise noted)RP40-FRSeriesDC/DC Conver terSpecifications (measured @ ta = 25°C, nominal input voltage, full load otherwise noted)RP40-FR SeriesPD-9REV.: 0/2016 Specifications (measured @ ta = 25°C, nominal input voltage, full load otherwise noted)DIMENSIONS and PHYSICAL CHARACTERISTICSParameter Type ValueMaterialCaseBasePottingCopper Alloy CuZn33FR4 PCBSilicone (UL94V-0)Packaging Dimension (LxWxH)without Heat-sinkwith Heat-sink50.8 x 25.4 x 10.2mm56.8 x 25.4 x 16.8mmPackaging Weightwithout Heat-sinkwith Heat-sink32g43g continued on next pagePD-10REV.: 0/PACKAGING INFORMATIONParameterTypeValuePackaging Quantity without Heat-sink with Heat-sink Tube Tray9pcs 20pcsStorage Temperature Range -55°C to +125°C Storage Humidity5% - 95% RHThe product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.25.4Specifications (measured @ ta = 25°C, nominal input voltage, full load otherwise noted)PD-11REV.: 0/RP40-4815SFR/N RP40-4815SFR/N-RP40-483.3SFR/NHCRP40-11012DFR/P RP40-11024DFR/N-HC RP40-2405SFR/P RP40-2412SFR/N-HCRP40-4805SFR/P-HC。
RPI-243;中文规格书,Datasheet资料
Electrical and optical characteristics (T a =25°C )Electrical and optical characteristics curvesExternal dimensions (Unit : mm)Fig.1 Relative output current vs.distance ( )Fig.4 Relative output current vs.distance ( )R E L A T I V E C O L L E C T O R C U R R E N T : I c (%)DISTANCE : d (mm)R E L A T I V E C O L L E C T O R C U R R E N T : I c (%)DISTANCE : d (mm)Fig.2 Forward current falloffF O R W A R D C U R R E N T : I F (m A )AMBIENT TEMPERATURE : Ta (°C)10504030200Fig.10 Output characteristics C O L L E C T O R C U R R E N T : I c (m A )COLLECTOR TO EMITTER VOLTAGE : V CE (V)Fig.11 Response time measurement circuitt d : t r : t f : Delay timeRise time (time for output current to risefrom 10% to 90% of peak current)Fall time (time for output current to fallfrom 90% to 10% of peak current)Fig.8 Response time vs.collector currentR E S P O N S E T I M E : t (µs )COLLECTOR CURRENT : Ic (mA)Fig.9 Dark current vs.ambient temperatureD A R K C U R RE N T : I D (n A )AMBIENT TEMPERATURE : Ta (°C)Fig.6 Relative output vs. ambienttemperatureR E L A T I V E C O L L E C T O R C U R R E N T : I c (%)AMBIENT TEMPERATURE : Ta (°C)Fig.7 Collector current vs.forward currentC O L L E C T O R C U R R E N T : I c (m A )FORWARD CURRENT : I F (mA )FORWARD VOLTAGE : V F (V ) F O R W A R D C U R R E N T : I F (m A )Fig.3 Forward current vs. forwardvoltageP O W E R D I S S I P A T I O N / C O L L E C T O R P O W E R D I S S I P A T I O N : P D / P c (m W )AMBIENT TEMPERATURE : Ta (°C)Fig.5 Power dissipation / collector powerdissipation vs. ambient temperature −200204060801002080P D P C10012060400AppendixAbout Export Control Order in JapanProducts described herein are the objects of controlled goods in Annex 1 (Item 16) of Export T rade ControlOrder in Japan.In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.Appendix1-Rev1.1 /分销商库存信息: ROHMRPI-243。
派克液压中文样本
液压注意 – 用户方责任 错误或不当地选择或使用本样本或有关资料阐述的产品，可能会导致人生伤亡及财产损失！ 本样本以及其它由派克汉尼汾公司及其子公司、销售公司与授权分销商所提供的资料，仅供用户专业技术人员在对产品和系统的选型进行深入调查考证时参考。
用户应全面分析自身设备的运行工况、适用的工业标准，并仔细查阅现行的样本，以详细地了解产品及系统的相关信息，通过自己的分析和试验，对产品及系统的独立的最终选择负责，确保能满足自身设备的所有性能、耐用性、维修型、安全性以及预警功能等要求。
对于派克或其子公司或授权分销商而言，应负责按用户提供的技术资料和规范，选择和提供适当的元件或系统，而用户则应负责确定这些技术资料和规范对其设备的所有运行工况和能合理预见的使用工况是否充分和准确。
目录目录页次概述 1 订货代号 2 技术参数 4 变量控制器 5 控制选项 “C”, 压力限定(恒压)变量控制器 5 控制选项 “L”, 负载传感及压力限定变量控制器 6 控制选项 “AM”, 带遥控口的标准型先导式压力限定变量控制器 7 控制选项 “AN”, 带ISO 4401 NG06先导阀安装界面的先导式压力限定变量控制器 8 控制选项 “AE”及“AF”, 带电磁比例调节的先导式压力限定变量控制器 9 控制选项 “AMT”, “ALT”及“LOT”, 带最高压力限定的扭矩限定(恒功率)变量控制器 10 P1性能特性 11典型流量特性 11 典型总效率特性 13 典型轴输入功率特性 15 典型噪声特性 18 典型轴承寿命 20 PD性能特性 22典型流量特性 22 典型总效率特性 24 典型轴输入功率特性 26 典型噪声特性 29 典型轴承寿命 31 安装尺寸 33 P1/PD 018 33 P1/PD 028 36 P1/PD 045 40 P1/PD 060 44 P1/PD 075 49 P1/PD 100 54 P1/PD 140 59 变量控制器安装尺寸 65 可提供的扩展的液压产品 75派克汉尼汾备记派克汉尼汾概述简介, 优点派克汉尼汾简介 • 开式回路用轴向柱塞式变量液压泵 • 中压，连续工作压力280 bar • 高驱动转速型，适用于行走机械； 低噪声型，适用于工业应用 • 静音及高效的控制效能 优点 • 总结构尺寸紧凑 • 低噪声• 流量脉动小，进一步降低噪声• 采用弹性密封，不使用密封垫，从而避免外泄漏的产生• 总效率高，功耗小，减小发热• 采用带无泄漏调节装的简单变量控制器 • 符合SAE 及ISO 标准的安装法兰及油口 • 采用圆锥滚柱轴承，使用寿命长 • 全功率后驱动能力• 后部或侧面油口配置可选• 泄油口的配置对水平安装及驱动轴向上垂直安装均适用• 带有最大及最小排量调节选项 • 具有壳体至吸口单向阀选项，可延长轴封寿命 • 使用、维修方便 脉动容腔技术下列图表所示为侧向油口配置P1/PD 18, 28及45泵采用 “脉动容腔” 技术的效果，脉动容腔可降低泵出口处的压力脉动幅值40-60%，这样，无需增加成本来加装噪声缓冲元件，便可大大降低液压系统的整体噪声，P1系列 PD 系列出口压力p / bar平均压力脉动 / b a rP1 045出口压力脉动2600 rpm 无脉动容腔2600 rpm 带脉动容腔订货代号18 ml, 28 ml, 45ml派克汉尼汾P 类型 01 驱动轴 转向R 5密封材料E 油口配置0 壳体-吸口 单向阀 0 排量调节 018 排量 S 安装法兰 及油口 S 轴封 M 应用范围A 设计系列0 通轴驱动选项 C0控制选项0附加控制选项 00油漆 00修改代号系列 P D * 仅适用于045排量, “S”型安装法兰及油口00 标准型, 无修改M2 按要求修改 代号修改代号 * 适用于028及045排量 ** 仅适用于045排量 代号设计系列 A 现行设计系列5 氟碳橡胶 (FPM) 代号密封材料 A 82-2 SAE A M33x2 M27x2 BSPP 1/4”, 3/8” 101-2 SAE B M42x2 M27x2 BSPP 1/4”, 1/2” 101-2SAE B M48x2M33x2Ø38/25DN51/25BSPP 1/4”, 1/2”B ISO M33x2 M27x2 BSPP 1/4”,3/8”ISO M42x2 M27x2 BSPP 1/4”, 1/2” ISO M48x2M33x2Ø38/25DN51/25BSPP 1/4”, 1/2”代号 018排量 028排量 045排量 安装法兰及油口 安装 法兰 螺纹 油口 辅助 油口 安装 法兰 螺纹 油口 辅助 油口 安装法兰螺纹油口法兰 油口辅助 油口 S 82-2 SAE A SAE 16/12 SAE 4/6 101-2 SAE B SAE 20/12 SAE 4/8 101-2SAE B SAE 24/16Ø38/2561系列SAE 4/10M ISO M33x2 M27x2 M12x1.5 M16x1.5 ISO M42x2 M27x2 M12x1.5 M22x1.5 ISO M48x2M33x2Ø38/25DN51/25M12x1.5M22x1.5代号 018驱动轴 028驱动轴 045驱动轴 01 SAE A 11T 花键SAE B-B 15T 花键 SAE B-B 15T 花键02 SAE 19-1平键Ø0.75” SAE B-B 平键Ø1” SAE B-B 平键Ø1” 08— SAE B 13T 花键 SAE B 13T 花键 04 ISO/DIN 平键, Ø20ISO/DIN 平键, Ø25ISO/DIN 平键, Ø25 06 SAE A 9T 花键— — PD 工业液压用 代号 系列P1 行走机械用 代号 排量 018 18 ml/rev (1.10 in 3/rev) 028 28 ml/rev (1.71 in 3/rev) 045 45 ml/rev (2.75 in 3/rev) 代号 类型 P 开式回路用变量柱塞泵 U*通用 代号应用范围 S 工业液压 (PD) M 行走机械 (P1) R 顺时针 (右转)L 逆时针 (左转)代号 转向 代号 轴封 S 单唇轴封 * 并不具有控制功能，仅在运输时予以防护，详情见第7页的控制说明。
345 电能质量钳表 用户手册 (简体中文)说明书
®345Power Quality Clamp Meter用户手册(Simplified Chinese)October 2006© 2006 Fluke Corporation. All rights reserved.Product names are trademarks of their respective companies.有限担保和有限责任Fluke担保在正常使用和保养的情况下，其产品没有材料和工艺上的缺陷。
担保期为从购买产之日起的一年内。
部件、产品修理和服务的担保期限为90天。
本担保仅限于Fluke授权零商的原购买人或最终用户，并且不适用于一次性电池、电缆接头、电缆绝缘接头或Fluke认为于误用、改装、疏忽、污染及意外或异常操作或处理引起的任何产品损坏。
Fluke担保软件依照功能规格正常运行90天，并且软件是记录在无缺陷的媒介上。
Fluke并不担保软件无错或在运行中不会中断。
Fluke授权的零售商应仅对最终用户就新的和未使用的产品提供本担保，但无权代表Fluke公司提供额外或不同的担保。
只有通过Fluke 授权的销售店购买的产品或买方已经按适的国际格付款才能享受Fluke的担保支持。
在一国购买的产品需在他国修理时，Fluke有权向买方求负担重大修理/零件更换费用。
Fluke的担保为有限责任，由Fluke决定是否退还购买金额、免费修理或更换在担保期间退还Fluke授权服务中心的故障产品。
如需要保修服务，请与您就近的Fluke授权服务中心联系，获得退还授权信息；然后将产品寄至务中心并附上产品问题描述，同时预付运费和保险费（目的地离岸价格）。
Fluke不承担运途中发生的损坏。
在保修之后，产品将被寄回给买方并提前支付运输费（目的地交货）。
如果Fluke认定产品故障是由于疏忽、误用、污染、修改、意外或不当操作或处理状况而产生包括未在产品规定的额定值下使用引起的过压故障；或是由于机件日常使用损耗，则Fluke会估算修理费用，在获得买方同意后再进行修理。
RP-0524S;RP-0505S;RP-1212S;RP-1215S;RP-0512D;中文规格书,Datasheet资料
Refer to Application NotesECONOLINEDC/DC-Converterwith 3 year WarrantyEN-60950-1 Certified UL-60950-1 Certified*EN-60601-1 Certified* +15/-9V pendingSelection GuidePart Input Output Output Efficiency Max Number Voltage Voltage Current Capacitive SIP 7(VDC)(VDC)(mA)(%)Load (1)RP-xx3.3S 5, 9, 12, 15, 24 3.3303702200µF RP-xx05S 5, 9, 12, 15, 24520070-721000µF RP-xx09S 5, 9, 12, 15, 249111751000µF RP-xx12S 5, 9, 12, 15, 24128475-78470µF RP-xx15S 5, 9, 12, 15, 24156680470µF RP-xx24S 5, 9, 12, 15, 24244280220µF RP-xx3.3D 5, 9, 12, 15, 24±3.3±15270±1000µF RP-xx05D 5, 9, 12, 15, 24±5±10074-76±470µF RP-xx09D 5, 9, 12, 15, 24±9±5675±470µF RP-xx12D 5, 9, 12, 15, 24±12±4279-82±220µF RP-xx15D 5, 9, 12, 15, 24±15±3380-82±220µF RP-xx24D5, 9, 12, 15, 24±24±2180±100µFxx = Input Voltage. Other input and output voltage combinations available on request * add Suffix “P” for Continuous Short Circuit Protection, e.g. RP-0505S/P , RP-0505D/P* add Suffix “/X2” for single output with alternative pinning e.g. RP-0505S/X2, RP-0505S/P/X2O u t p u t P o w e r (%)100602040Operating Temperature °C80Specifications (measured at T A = 25°C, nominal input voltage, full load and after warm-up)Input Voltage Range±10%Output Voltage Accuracy ±5%Line Voltage Regulation 1.2%/1% of Vin typ.Load Voltage Regulation 3.3V output types 20% max.(10% to 100% full load)5V output type 15% max.9V, 12V, 15V, 24V output types 10% max.Output Ripple and Noise (20MHz limited)100mVp-p max.Operating Frequency 50kHz min. / 100kHz typ. / 120kHz max.Efficiency at Full Load 70% min. / 80% typ.Minimum Load = 0%Specifications valid for 10% minimum load only.Isolation Voltage (tested for 1 second)5200VDC(rated for 1 minute)2600VAC / 60HzIsolation Capacitance 4pF min. / 10pF max.Isolation Resistance 20 G Ωmin.Short Circuit Protection 1 Second P-Suffix Continuous Operating Temperature Range (free air convection)-40°C to +85°C (see Graph)Storage Temperature Range -55°C to +125°C Relative Humidity 95% RH Package Weight 2.4g Packing Quantity 25 pcs per Tube MTBF (+25°C)using MIL-HDBK 217F 928 x 103 hours (+85°C)using MIL-HDBK 217F 150 x 103 hours1 WattSIP 7 Single &Dual OutputDerating-Graph(Ambient T emperature)●Pot-Core Transformer - separated windings ●High 5.2kVDC Isolation in compact size●Optional Continuous Short Circuit Protected ●Pin Compatible with RH and RK Series ●Approved for Medical and Lab Applications ●UL and EN Certified●Efficiency to 82%FeaturesUnregulated Converters}Detailed Information seeApplication Notes chapter "MTBF"DescriptionThe RP series has very high isolation of 5.2 kVDC in a compact size. The converters are EN-60601-1 certified, making them suitable for medical as well as IGBT driver applications.The /X2 version has rearraged pins to permit an input(output seperation of more than 9mm.RPR PREV: 1/20121RoHS2002/95/EC6/6E-224736/Typical CharacteristicsE f f i c i e n c y %100040%0%100%40Efficiency / Load 60%80%20%206080Total Output current (%)E f f i c i e n c y %100040%0%100%40Efficiency / Load60%80%20%206080Total Output current (%)Deviation / Load-10.00040%0%100%D e v i a t i o n f r o m N o m i n a l (%)60%80%20%-5.000Total Output current (%)0.0005.00010.00015.00020.00025.000Deviation / Load-10.00040%0%100%D e v i a t i o n f r o m N o m i n a l (%)60%80%20%-5.000Total Output current (%)0.0005.00010.00015.00020.00025.000E f f i c i e n c y %100040%0%100%40Efficiency / Load 60%80%20%206080Total Output current (%)E f f i c i e n c y %100040%0%100%40Efficiency / Load 60%80%20%206080Total Output current (%)Deviation / Load-10.00040%0%100%D e v i a t i o n f r o m N o m i n a l (%)60%80%20%-5.000Total Output current (%)0.0005.00010.00015.00020.00025.000Deviation / Load-10.00040%0%100%D e v i a t i o n f r o m N o m i n a l (%)60%80%20%-5.000Total Output current (%)0.0005.00010.00015.00020.00025.000RP-xx05SRP-xx12SRP-xx05DRP-xx12DREV:1/20122 RP/Single Output Dual OutputSingle Output/X13REV: 1/2012R PPackage Style and Pinning (mm)3rd angle projection7 PIN SIP PackageXX.X ± 0.5 mm XX.XX ± 0.25 mmE f f i c i e n c y %100040%0%100%40Efficiency / Load60%80%20%206080Total Output current (%)Deviation / Load-10.00040%0%100%D e v i a t i o n f r o m N o m i n a l (%)60%80%20%-5.000Total Output current (%)0.0005.00010.00015.00020.00025.000E f f i c i e n c y %100040%0%100%40Efficiency / Load60%80%20%206080Total Output current (%)Deviation / Load-10.00040%0%100%D e v i a t i o n f r o m N o m i n a l (%)60%80%20%-5.000Total Output current (%)0.0005.00010.00015.00020.00025.000RP-xx15SRP-xx15DTypical CharacteristicsNotes Note 1Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter.CertificationsCSA General Safety Report: E248550CSA C22.2 No. 60950-1-03UL General Safety Report: E248550UL 60950-1 1st Ed.EN General Safety Report: PS-R7219C1EN60950-1:2001 + A11:2004EN Medical safety Report: 1007090EN 60601-1:1990 + A13:1996ESDReport: 70124402-ESIEC 61000-4-2Pin ConnectionsPin #Single Dual /X21+Vin +Vin +Vin 2–Vin –Vin -Vin 5–Vout –Vout No Pin 6No Pin Com -Vout 7+Vout+Vout+VoutRecommended Footprint Details/分销商库存信息:RECOM-POWERRP-0524S RP-0505S RP-1212S RP-1215S RP-0512D RP-0505D RP-0515D RP-0515S RP-0509S RP-0512S RP-1205S RP-2405S RP-1212D RP-1515S RP-0505S/P RP-053.3S RP-0905S RP-0909S RP-0912S RP-0915S RP-0924S RP-093.3S RP-1209S RP-1224S RP-123.3S RP-0509D RP-0524D RP-053.3D RP-0905D RP-0909D RP-0912D RP-0915D RP-0924D RP-093.3D RP-1209D RP-1215D RP-1224D RP-123.3D RP-1509S RP-1512S RP-1524S RP-153.3S RP-2409S RP-2412S RP-2415S RP-243.3S RP-0505S/X2RP-0509S/X2 RP-0512S/X2RP-0515S/X2RP-0524S/X2 RP-053.3S/X2RP-0905S/X2RP-0909S/X2 RP-0912S/X2RP-0915S/X2RP-0924S/X2 RP-093.3S/X2RP-1205S/X2RP-1209S/X2 RP-1212S/X2RP-1215S/X2RP-1224S/X2 RP-123.3S/X2RP-0509S/P RP-0512S/P RP-0524S/P RP-053.3S/P RP-0905S/P RP-0909S/P RP-0912S/P RP-0915S/P RP-0924S/P RP-093.3S/P RP-1205S/P RP-1209S/P RP-1212S/P RP-1215S/P RP-1224S/P RP-123.3S/P RP-1505D RP-1509D RP-1512D RP-1524D RP-153.3D RP-2405D RP-2409D RP-2412D RP-2415D RP-2424D RP-243.3D RP-0505D/X2RP-0509D/X2 RP-0512D/X2RP-0515D/X2RP-0524D/X2 RP-053.3D/X2RP-0905D/X2RP-0909D/X2 RP-0912D/X2RP-0915D/X2RP-0924D/X2 RP-093.3D/X2RP-1205D/X2RP-1209D/X2 RP-1212D/X2RP-1215D/X2RP-1224D/X2 RP-123.3D/X2RP-1505S/X2RP-1509S/X2 RP-1512S/X2RP-1515S/X2RP-1524S/X2 RP-153.3S/X2RP-2405S/X2RP-2409S/X2 RP-2412S/X2RP-2415S/X2RP-2424S/X2 RP-243.3S/X2RP-1205D RP-1505S RP-2424S RP-0505D/P RP-0509D/P RP-0512D/P RP-0515D/P RP-0524D/P RP-053.3D/P RP-0905D/P RP-0909D/P。
PT二次压降测试仪说明书
PT二次压降测试仪说明书由于输入输出端子、测试柱等均有可能带电压，在插拔测试线、电源插座时，会产生电火花，小心电击，避免触电危险，注意人身安全！安全要求请阅读下列安全注意事项，以免人身伤害，为了避免可能发生的危险，只可在规定的范围内使用。
只有合格的技术人员才可执行维修。
—防止火灾或人身伤害使用适当的电源线。
只可使用专用并且符合规格的电源线。
正确地连接和断开。
当测试导线与带电端子连接时，请勿随意连接或断开测试导线。
注意所有终端的额定值。
为了防止火灾或电击危险，请注意所有额定值和标记。
在进行连接之前，请阅读使用说明书，以便进一步了解有关额定值的信息。
使用适当的保险丝。
只可使用符合规定类型和额定值的保险丝。
避免接触裸露电路和带电金属。
有电时，请勿触摸裸露的接点和部位。
请勿在潮湿环境下操作。
请勿在易爆环境中操作。
－安全术语警告：警告字句指出可能造成人身伤亡的状况或做法。
目录一概述 (5)二主要特点 (5)三主要技术指标 (6)四工作原理 (7)五软件主要功能介绍 (7)六使用方法及注意事项 (10)七附一：检定方法 (21)一．概述电能计量综合误差过大是电能计量中普遍存在的一个关键问题，电能计量综合误差是由电压互感器的合成误差、电流互感器的合成误差、电度表的误差、电压互感器二次导线压降所引起的计量误差所组成。
在这四项误差中，电压互感器二次导线压降引起的计量误差往往是最大的。
电能计量装置检定规程《SD109－83》和有关技术法规，对电压互感器二次回路压降引起的误差均有规定，必须准确、快速、方便、可靠地测量出来。
电压互感器二次回路压降包括电缆、端子接触电阻、熔线、中间继电器接点、空气小开关等电压降之总和。
所谓电压互感器二次电压降引起的误差，就是指电压互感器二次端子和负载端子之间电压的幅值差相对于二次实际电压的百分数，以及两个电压之间的相位差的总称。
电压互感器二次回路压降测量方法通常有间接测量法和直接测量法两种（无线测量属于间接测量法），由于间接测量法准确度不太高，不能满足测量要求，一般不采用此种方法，而直接测量法（校验仪测量法）采用测差原理，准确度高，测量可靠，因此在实际测量中大量采用。
RP08-AW系列宽范围输入DC DC转换器说明书
DescriptionThe RP08-AW series wide range input DC/DC converters are certified to UL60950-1 and cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The 24V and 110VDC input versions have been especially designed for railway applications. The DIP24 package is available in both pinned and SMD case styles and meets military standards for thermal shock and vibration tolerance.RP08-AW DC/DC ConverterE196683UL60950-1 certifiedEN50155 certified8 WattDIP24/SMDSingle and Dual OutputFeaturesRegulated Converter• 4:1 Wide input voltage range • 1.6kVDC isolation• UL60950-1, EN50155 certified • Efficiency up to 88%• Protected outputs• High input voltage range (110VDC)Selection GuidePart Number Input Output Output Input (1) Efficiency (1) Max. Capacitive Voltage Range Voltage Current Current typ. Load (2) [VDC] [VDC] [mA] [mA] [%] [µF]RP08-243.3SAW (3)9-36 3.3 2400 388 85 1330RP08-2405SAW (3) 9-36 5 1600 383 87 1330RP08-2412SAW (3)9-36 12 666 387 86 288RP08-2415SAW (3) 9-36 15 533 387 86 200RP08-483.3SAW (3)18-75 3.3 2400 194 85 1330RP08-4805SAW (3) 18-75 5 1600 192 87 1330RP08-4812SAW (3)18-75 12 666 191 87 288RP08-4815SAW (3) 18-75 15 533 189 88 200RP08-1103.3SAW (3)43-160 3.3 2400 86 84 1330RP08-11005SAW (3) 43-160 5 1600 86 85 1330RP08-11012SAW (3)43-160 12 666 84 86 288RP08-11015SAW (3) 43-160 15 533 85 86 200RP08-2405DAW (3)9-36 ±5 ±800 397 84 ±900RP08-2412DAW (3) 9-36 ±12 ±333 387 86 ±133RP08-2415DAW (3)9-36 ±15 ±267 388 86 ±90RP08-4805DAW (3) 18-75 ±5 ±800 198 84 ±900RP08-4812DAW (3)18-75 ±12 ±333 191 87 ±133RP08-4815DAW (3) 18-75 ±15 ±267 192 87 ±90RP08-11005DAW (3)43-160 ±5 ±800 89 82 ±900RP08-11012DAW (3) 43-160 ±12 ±333 85 85 ±133RP08-11015DAW (3)43-160 ±15 ±267 86 85 ±90Input Voltage Output Voltage S ingle or D ualPackage (3)RP08-__ __ _AW/_Model NumberingOrdering ExamplesRP08-4805AW/SMD = 48V Input, 5V Output, SMD Package RP08-2405AW = 24V Input, 5V Output, DIP24 PackageNotes:Note3: No suffix for standard package (DIP24), add suffix “SMD” for SMD packageNotes:Note1: Maximum value at nominal input voltage and full loadNote2: Max Cap Load is tested at minimum Vin and constant resistive loadhttps:///pdf/Powerline_DC-DC/RSPxxx-168.pdfSpecifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)REGULATIONSParameter Condition Value Output Voltage Accuracy±1.0% Line Voltage Regulation low line to high line, full load±0.2%Load Voltage Regulationno load to full loadDIP24SingleDual±0.5%±1.0%SMD Single, Dual±1.0% 10% load to 90% loadDIP24SingleDual±0.3%±0.8%SMD Single, Dual±0.8%Cross Regulation asymmetrical 25%<>100% load±5.0% Transient Response recovery time25% load step change250μs typ.Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)PROTECTIONSParameterConditionValueShort Circuit Protection (SCP)continuous, automatic recoveryOver Voltage Protection (OVP)Single Output3.3Vout5Vout12Vout 15Vout3.9VDC typ.6.2VDC typ.15VDC typ.18VDC typ.Over Load Protection (OLP)% of Iout rated150% typ.Isolation Voltage DIP24I/P to O/P , I/P (O/P) to case 1.6kVDC/1 minute SMDI/P to O/PI/P (O/P) to case 1.6kVDC/1 minute 1.0kVDC/1 minuteIsolation Resistance 500VDC1G Ω min.Isolation Capacitance 1500pF max.Insulation GradefunctionalNotes:Note5: This power module is not internally fused. An input line fuse must always be used Recom suggests: 24Vin=T2A; 48Vin=T1A; 110Vin=T0.5A slow blowSpecifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)SAFETY AND CERTIFICATIONSCertificate Type (Safety)Report / File Number StandardInformation Technology Equipment, General Requirements for Safety E196683UL60950-1, 2nd Edition, 2014 C22.2 No. 60950-1-07, 2nd Edition, 2014Information Technology Equipment, General Requirements for Safety (LVD)TW1708010-001IEC60950-1:2005, 2nd Edition +A2:2013EN60950-1:2006 + A2:2013RoHS2+RoHS-2011/65/EU + AM-2015/863Railways Condition Standard / Criterion Railway Applications - Electrical Equipment used on rolling stock15A100701E-C EN50155:2007 Environmental testing Part 2-1: Tests – Test A: Cold temperature: -25°C, Dwell Time: 2 hours EN60068-2-1:2007 Environmental testing Part 2-2: Tests – Test B: Dry heat temperature: +70°C, Dwell Time: 6 hours EN60068-2-2:2007Environmental testing Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)temperature: +25 to +55°Chumidity: 90% to 100%RHtest Duration: 24 hours/cycle, 2 cyclesEN60068-2-30:2005Railway applications - Fire protection on railway vehicles Part2:Requirements for fire behaviour of materials and componentsEN45545-2:2013 Fire hazard testing Part 2-11: Glowing/hot-wire based testmethods –Glow-wire flammability test method for end-productsglow-wire test EN60695-2-11 Fire hazard testing Part 11-10: Test flames – 50 W horizontal andvertical flame test methodsvertical flame test EN60695-11-10 EMC Compliance Railway Condition Standard / Criterion Railway applications - Electromagnetic compatibility EN50121-3-2:2006 Industrial, scientific and medical equipment – Radio frequencydisturbance characteristics – Limits and methods of measurementEN55011 ESD Electrostatic discharge immunity test Air ±2, 4,8kV, Contact ±2, 4, 6kV EN61000-4-2, Criteria ARadiated, radio-frequency, electromagnetic field immunity test20V/m (80-1000MHz)10V/m (1400-2100MHz)5V/m (2100-2500MHz)EN61000-4-3, Criteria AFast Transient and Burst Immunity DC Power Port: ±2kV EN61000-4-4, Criteria ASurge ImmunityDC Power Port: Line-Line ±0.5, 1kVDC Power Port: Line-Earth ±0.5, 1.2kVEN61000-4-5, Criteria AImmunity to conducted disturbances, induced by radio-frequency fields DC Power Port 10V EN61000-4-6, Criteria AEMC Compliance Multimedia and IT Condition Standard / Criterion Electromagnetic compatibility of multimedia equipment –EmissionRequirementsEN55032:2015+AC:2016-07, Class B Information technology equipment - Immunity characteristics - Limitsand methods of measurementEN55024:2010 + A1:2015 ESD Electrostatic discharge immunity test Air ±2, 4, 8kV, Contact ±2, 4, 6kV IEC61000-4-2:2008, Criteria ARadiated, radio-frequency, electromagnetic field immunity test20V/m (80-1000MHz)IEC61000-4-3:2006+A1:2007 + A2:2010,Criteria AFast Transient and Burst Immunity DC Power Port: ±2kV IEC61000-4-4:2012, Criteria A Surge Immunity DC Power Port: ±2kV IEC61000-4-5:2014, Criteria A Immunity to conducted disturbances, induced by radio-frequency fields DC Power Port 10V IEC61000-4-6:2013, Criteria APower Magnetic Field Immunity50Hz 100A 1 minute50Hz 1000A 1 secondIEC61000-4-8:2009, Criteria ANotes:Note9: The standard modules meet EMI Class A or Class B with external components, see filter suggestions below on next page Note10: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5 Recom suggests Nippon chemi-con KY series 24Vin, 48Vin=220μF/100V or 110Vin=150μF/200VDIMENSIONS and PHYSICAL CHARACTERISTICSParameter Type ValueMaterialcasebasepottingnickel coated coppernon-conductive black plastic (UL94-V2)epoxy (UL94-V0)Package Dimensions (LxWxH)DIPSMD31.8 x 20.3 x 10.2mm32.0 x 20.3 x 11.2mmPackage WeightDIPSMD18g20g continued on next pageSpecifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorizeduse of RECOM products in such safety-critical applications.PACKAGING INFORMATIONParameterTypeValuePackaging Dimension (LxWxH)TubeDIP24SMD255.0 x 23.0 x 19.0mm 255.0 x 32.0 x 16.0mmPackaging Quantity DIP24, SMD7pcsStorage Temperature Range -55°C to +125°C Storage Humidity5% - 95% RH。
PT2432 PT2432A 3 相无传感器无刷直流马达驱动器说明书
PT2432/PT2432A 3相无传感器无刷直流马达驱动器说明PT2432是一个集成的12V（PT2432A：24V）3相无传感器无刷直流马达驱动器，并具有先进的保护功能。
其中包括软启动电路，过热保护，堵转保护和限电流保护。
PT2432是非常适合无传感器马达应用，对于要求高效率风扇马达控制也非常理想。
速度控制接口(VSP)可支持PWM和DC命令，允许从平稳低速到高速马达控制。
PT2432仅需要很少的外围器件，可实现紧凑的PCB布局。
PT2432采用了全新的BCD工艺，只需要单一电源，而电压范围从6 V至 15V（PT2432A：从20V 至28V），采用HTSSOP16和QFN48封装，实现了优异的功率效率，使其成为集中、低成本、无传感器无刷直流马达系统完美解决方案。
产品特色∙多电源BCD技术∙三相无传感器控制∙软启动控制功能∙软切换功能可静音运行∙堵转保护功能∙具有30o C迟滞窗口的过热保护功能∙支持PWM或DC马达速度控制命令∙可由一个外部精密电阻设置过电流限值∙FG输出功能，提供了类似于霍尔传感器的脉冲信号应用∙三相无传感器无刷直流马达驱动器∙CPU，GPU，或服务器之风扇∙水泵∙小型电机功能方块图HTSSOP16应用电路应用电路组件值表Notes : 1. C2和C3是取决于马达类型.2. R1是取决于马达的应用.QFN48应用线路应用电路组件值表Notes : 1. C3和C4是取决于马达类型.2. R1和R2是取决于马达的应用.HTSSOP16引脚配置引脚说明QFN48引脚配置引脚说明功能說明电源PT2432提供一种内建电压稳压器，除了输出驱动级外，供电给模拟与数字电路区块。
驱动级的负载是马达线圈，呈现电感特性，当马达开始转动，会引导出大电流和尖峰电压。
需要一个合适的旁路电容，并尽可能的放置接近VDD引脚来减少这些尖峰。
此外，加入一个15V（PT2432A：28V）齐纳二极管将帮助抵御从马达反电动势（BEMF）电压。
FEATURES 电源说明书
Multiple Output Linear
D.C. Power Supply
Stock No. :
1225035 1225036 1225037 1225038
Model :
RPE-4323 RPE-3323 RPE-2323 RPE-1326
ENGLISH
FEATURES
1/2/3/4 Independent Isolated Output 4.3 Inch LCD Display Setting & Read Back Resolution 100mV/10mA (*1) Output On/off Analog Control (Remote I/O) For Output ON/OFF Set View Function For Checking an Original V/I Setting During Output On Key Lock Function Tracking Series And Parallel Operation Smart Cooling Fan Achieving Low Noise Optional European Jack Type Terminal
B. CONVENIENT FUNCTION
C. REMOTE I/O FOR OUTPUT ON/OFF FUNCTION
The key lock function prevent DUTs from unnecessary damages caused by mis-operation.
The RPE-X323 series has a built-in set view and key lock so as to expedite the operation process. The key lock function protects DUTs by preventing others from changing Voltage/Current parameters.
非晶切割砂轮片的性能要求
非晶切割砂轮片的性能要求非晶合金由于具有磁性、高的电阻率、硬度过高且及其脆等特点，所以给加工和切割工艺带来不少困难。
奥拓夫AUTOFOR超薄树脂切割砂轮片，源自德国进口制造设备和生产工艺，生产出的切割砂轮片切割效果已超欧美日品牌。
非晶合金应用最广泛的领域是变压器，由于它的特殊产品性能，这就决定了非晶合金在切割时必须做到无毛边、无烧伤、切割端口平整等。
奥拓夫AUTOFOR已成为非晶、纳米晶、硅钢、矽钢、合金铁芯等专用切割砂轮片最大制造企业，生产的砂轮切割片确保耐用、锋利、端口平整、无烧伤，配在奥拓夫AUTOFOR品牌切割设备上甚至可以达到端口镜面效果，无须二次打磨，极大节省人力成本。
非晶合金铁芯、矽钢铁芯、铍膜磁芯切割片规格(尺寸：mm)型号外径厚度内径FX150 150 0.3/0.4/0.5/0.6/0.7/0.8/0.9/1.0/1.2/1.5/1.8/2.0/2.2/2.5/2.8/3.0/---25.4 30 31.75 4032 50FX180 180 0.4/0.5/0.6/0.7/0.8/0.9/1.0/1.2/1.5/1.8/2.0/2.2/2.5/2.8/3.0---25.4 30 31.75 4032 50FX205 205 0.4/0.5/0.6/0.7/0.8/0.9/1.0/1.2/1.5/1.8/2.0/2.2/2.5/2.8/3.0---25.4 30 31.75 4032 50FX230 230 0.5/0.6/0.7/0.8/0.9/1.0/1.2/1.5/1.8/2.0/2.2/2.5/2.8/3.0---25.4 30 31.75 4032 50FX255 255 0.8/0.9/1.0/1.2/1.5/1.8/2.0/ 2.2/2.5/2.8/3.0---25.4 30 31.75 4032 50FX305 305 1.0/1.2/1.5/1.8/2.0/2.2/2.5/2.8/3.0---25.4 30 31.75 4032 50FX355 355 1.2/1.5/1.8/2.0/2.2/2.5/2.8/3.0---25.4 30 31.75 4032 50FX405 405 1.5/1.8/2.0/2.2/2.5/2.8/3.0---25.4 30 31.75 4032 50FX455 455 1.2/1.5/1.8/2.0/2.2/2.5/2.8/3.0---25.4 30 31.75 4032 50FX510 510 1.5/1.8/2.0/2.2/2.5/2.8/3.0---25.4 30 31.75 4032 50奥拓夫AUTOFOR世界“超薄切割技术”的继承者、发扬着、领航者！奥拓夫AUTOFOR已成为“超薄切割”生产工艺的标杆企业。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
125 100 75 Output Power (%) 50 25 0 -40 -25 -10 0 50 60 70 80 90 100 77 Ambient Temperature Range (°C)
Natural Convection
50 25
Natu. The RP05 AW series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40 °C (Ground fixed and controlled environment). 3. M2 version is more efficient, therefore, it can be operated in a more extensive temperature range than the standard version. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. Simulated source impedance of 12uH. 12uH inductor on series with +Vin. 8. See application notes for EMI-filtering.
元器件交易网
Features
Regulated Converters
● ● ● ● ● ● ● ● ●
4:1 Wide Input Voltage Range 5 Watts Regulated Output Power 1.6kVDC Isolation Fixed Operating Frequency International Safety Standard Approvals Five-Sided Shield Standard DIP24 and SMD-Pinning UL 1950 Component Recognized High Efficiency to 82%
Derating-Graph (Ambient Temperature)
RP05-2415DAW
125 100 75 Output Power (%) 50 25 0 -25 -10 0 50 60 70 80 90 100
Natural Convection
Ambient Temperature Range (°C)
POWERLINE
DC/DC-Converter
RP05S_DAW Series
5 Watt DIP24 & SMD, Single & Dual Output
Selection Guide 12V, 24V and 48V Input Types
Part Number DIP24 (SMD) RP05-243.3SAW** RP05-2405SAW** RP05-2412SAW** RP05-2415SAW** RP05-483.3SAW** RP05-4805SAW** RP05-4812SAW** RP05-4815SAW** RP05-2405DAW** RP05-2412DAW** RP05-2415DAW** RP05-4805DAW** RP05-4812DAW** RP05-4815DAW** Input Range VDC 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 9-36 9-36 9-36 18-75 18-75 18-75 Output Voltage VDC 3.3 5 12 15 3.3 5 12 15 ±5 ±12 ±15 ±5 ±12 ±15 Output Current mA 1000 1000 470 400 1000 1000 470 400 ±500 ±230 ±190 ±500 ±230 ±190 Input (4) Current mA 191 285 309 329 100 145 155 167 282 295 313 145 151 159 Efficiency(5) % 76 77 80 80 73 76 80 79 78 82 80 76 80 79 Capacitive(6) Load max. µF 2200 1000 220 150 2200 1000 220 150 ±680 ±100 ±68 ±680 ±100 ±68
Isolation Voltage In to out I/O to case I/O to case
RP05-S_DAW Series
1.600VDC min. DIP type 1.600VDC min. SMD type 1.000VDC min. 109 Ω min. 300pF max. 300kHz typ. UL 1950, EN60950 Standard M2 (see note 3) -25°C to +85°C (with derating) -40°C to +85°C (with derating) +100°C -55°C to +105°C Natural convection 20°C/Watt MIL-STD-810D 10-55Hz, 2G, 30 Min. along X, Y and Z 5% to 95% RH Nickel-Coated copper Non-conductive black plastic Epoxy (UL94-V0) EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 DIP SMD DIP SMD Level A Level A Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 16g 18g 31.8 x 20.3 x 10.2mm 32.0 x 20.3 x 10.9mm 3.165 x 106 Hours
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range Input Filter Input Surge Voltage (100 ms max.) 12V Input 24V Input 48V Input 24V nominal input 48V nominal input 9-36VDC 18-75VDC Pi Type 36VDC 50VDC 100VDC 20mAp-p 600ms typ. 5W max. ±2% 10% of FL ±0.2% Single Dual ±0.2% ±1% ±5% 50mVp-p ±0.02%/°C, max. 200µS 170% typ Continuous, automatic recovery see „Selection Guide“ table continued on next page
0 -40 -25 -10 0
50 60 70 80 90 100
Ambient Temperature Range (°C)
Derating graphes are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at info@recom-development.at
Input Reflected Ripple (nominal Vin and full load) Start Up Time (nominal Vin and constant resistor load) Output Power Output Voltage Accuracy (full Load and nominal Vin) Minimum Load (see Note 1) Line Regulation (LL-HL at full load) Load Regulation (25% to 100% FL) Cross Regulation (asymmetrical load 25%/100% FL) Ripple and Noise (20MHz bandwith) Temperature Coefficient Transient Response (25% load step change) Over Load Protection (% of full load at nominal Vin) Short Circuit Protection Efficiency
April-2005
195
元器件交易网
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)