Ansys常用命令-单元坐标系结果坐标系
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
1.4单元坐标系
1.4.1ESYS，KCN
Sets the element coordinate system attribute pointer.
KCN：Coordinate system number：
Command Default：Use element coordinate system orientation as defined (either by default or by KEYOPT setting) for the element (default).
Notes：Identifies an element coordinate system to be assigned to subsequently defined elements. Used only with area and volume elements. This number refers to the coordinate system reference number (KCN) defined using the LOCAL (or similar) command. Element coordinate system numbers may be displayed [/PNUM].
1.5结果坐标系
1.5.1RSYS，KCN
Activates a coordinate system for printout or display of element and nodal results.
KCN：The coordinate system to use for results output：
Command Default：Activate global Cartesian (KCN = 0) coordinate system.。