NOV顶驱05 TDS-8SA Drawing
维萨拉工业测量产品手册说明书
维萨拉工业测量产品手册湿度 | 温度 | 露点 | 二氧化碳 | 沼气 | 油中水分 | 连续监测系统 |溶解气体分析系统 | 过氧化氢 | 压力 | 气象 | 服务支持观测让世界更美好维萨拉的工业测量业务领域产品能够帮助客户了解工艺过程。
我们的产品为客户提供准确可靠的测量数据，帮助客户做出优化工业过程的决策，从而提高过程效率、产品质量、生产力和产量，同时减少能源消耗、浪费和排放。
我们的监测系统还能帮助客户在受监管的环境中运营，以履行监管合规性。
维萨拉工业测量服务于多种类型的运营环境，从半导体工厂和高层建筑，到发电厂和生命科学实验室，对环境条件的可靠监测是实现成功运营的先决条件。
维萨拉的测量产品和系统广泛应用于监测温度、湿度、露点、气压、二氧化碳、汽化过氧化氢、甲烷、油中水、变压器油中溶解气体和液体浓度等参数。
我们的生命周期服务可在测量仪表的整个使用寿命内提供维护。
作为值得信赖的合作伙伴，我们通过在产品和系统生命周期中保证准确的测量数据来支持客户做出可持续的决策。
本产品目录对我们的产品进行整体的介绍，以帮助您选择适合您需求的产品。
如需更多信息，请通过以下方式联系我们：销售热线：400 810 0126电子邮箱：**********************公司网址：扫描二维码，关注维萨拉企业微信3目 录Indigo系列变送器Indigo200系列数据处理单元 (7)Indigo300数据处理单元 (9)Indigo510数据处理单元 (12)Indigo520数据处理单元 (15)用于抽检和校准的手持设备Indigo80手持式显示表头 (18)HMP80系列手持式湿度和温度探头 (21)DMP80系列手持式露点和温度探头 (23)HM70手持式湿度和温度仪 (26)HUMICAP® 手持式湿度温度仪表HM40系列 (29)DM70手持式露点仪 (33)MM70适用于现场检测的手持式油中微量水分和温度测试仪 (36)湿度和温度用于测量相对湿度的维萨拉HUMICAP® 传感器 (38)如何为高湿度应用选择合适的湿度仪表 (40)Insight PC机软件 (44)HMP1墙面式温湿度探头 (46)HMP3一般用途湿度和温度探头 (48)HMP4相对湿度和温度探头 (51)HMP5相对湿度和温度探头 (54)HMP7相对湿度和温度探头 (57)HMP8相对湿度和温度探头 (60)HMP9紧凑型湿度和温度探头 (63)TMP1温度探头 (66)适用于苛刻环境中湿度测量的HMT330系列温湿度变送器 (68)HMT370EX系列本安型温湿度变送器 (78)HMT310温湿度变送器 (84)HUMICAP® 温湿度变送器HMT120和HMT130 (87)适用于高性能暖通空调应用的HMW90系列湿度与温度变送器 (90)HMD60系列湿度和温度变送器 (92)HMD110/112和HMW110/112湿度和温度变送器 (96)适用于楼宇自动化高精度室外测量的HMS110系列温湿度变送器 (99)HMDW80系列温湿度变送器 (101)适用于楼宇自动化应用室外测量的HMS80系列温湿度变送器 (105)HMM100湿度模块 (107)适用于OEM应用的HMM105数字湿度模块 (109)HMM170温湿度模块 (111)INTERCAP® 温湿度探头HMP60 (113)4INTERCAP® 温湿度探头HMP63 (115)HUMICAP® 温湿度探头HMP110 (117)HUMICAP® 温湿度探头HMP113 (120)SHM40结构湿度测量套件 (122)HMK15湿度校准仪 (125)DTR500太阳辐射和雨水防护罩 (127)HMT330MIK气象安装套件 (129)适用于动力汽轮机进气测量的HMT300TMK汽轮机安装组件 (131)露点Vaisala DRYCAP® 传感器用于测量干燥过程中的湿度 (133)DMP5露点和温度探头 (135)DMP6露点探头 (138)DMP7露点和温度探头 (140)DMP8露点和温度探头 (142)DMT340系列露点和温度变送器 (145)适用于高温应用的DMT345和DMT346露点变送器 (151)DMT152露点变送器 (155)DMT143露点变送器 (157)DMT143L露点变送器 (160)用于冷冻干燥机的DMT132露点变送器 (162)DM70用DSS70A便携式采样系统和采样室 (164)DPT146露点和气压变送器 (166)DPT145多参数变送器 (168)二氧化碳适用于苛刻环境的维萨拉CARBOCAP® 测量传感器 (171)GMP343二氧化碳探头 (173)适用于CO2恒温箱的GMP231二氧化碳探头 (176)GMP251二氧化碳探头 (178)GMP252二氧化碳探头 (181)GM70手持式二氧化碳测试仪 (184)适用于苛刻通风要求应用的GMW90系列二氧化碳及温湿度变送器 (187)适用于智能控制通风系统 (DCV) 的GMW80系列二氧化碳、湿度和温度一体变送器 (190)按需控制通风系统中的GMD20系列二氧化碳变送器 (193)GMD110管道安装式二氧化碳变送器 (195)沼气MGP261多气体探头 (197)MGP262多气体探头 (199)油中水用于测量油中微水的维萨拉HUMICAP® 传感器 (201)MMP8油中水分探头 (203)MMT330系列油中微量水分与温度变送器 (205)5MMT310系列油中微量水分与温度变送器 (209)MMT162油中微量水分和温度变送器 (211)连续监测系统维萨拉viewLinc企业版服务器版本5.1 (213)AP10 VaiNet无线接入点 (215)用于连续监测系统的RFL100无线数据记录仪 (218)HMP115温湿度探头 (223)TMP115宽范围温度探头 (225)维萨拉温度与相对湿度数据记录仪系列DL2000 (227)维萨拉通用输入数据记录仪系列DL4000 (229)维萨拉多应用温度数据记录仪DL1016/1416 (231)维萨拉热电偶数据记录仪系列DL1700 (233)维萨拉中端温度、湿度及触点通道数据记录仪 (235)维萨拉vNet以太网供电数据记录仪接口 (238)溶解气体分析OPT100 Optimus™ 溶解气体分析(DGA)监测系统 (240)MHT410变压器油中微量水分、氢气和温度分析仪 (244)过氧化氢用于测量汽化过氧化氢、相对饱和度和相对湿度的维萨拉PEROXCAP® 传感器 (246)用于过氧化氢、湿度和温度测量的HPP270系列探头 (249)压力用于测量压力的维萨拉BAROCAP® 传感器 (253)PTU300气压、湿度和温度一体变送器 (255)适用于专业气象、航空与工业用户的PTB330数字式气压计 (260)气压传递标准PTB330TS (262)PTB210数字气压计 (265)PTB110气压计 (267)将风引起误差降低的SPH10/20静压头 (269)气象Vaisala用于工业应用测量的风和气象传感器技术 (271)风测量装置WA15 (273)WINDCAP® 超声波风传感器WMT700系列 (276)气象变送器WXT530系列 (278)服务支持面向仪表全生命周期服务 (280)67功能•数据处理单元 USB-C 端口支持使用通用 USB 电缆连接到维萨拉Insight PC 软件•数字和图形彩色显示屏（针对模拟型号提供可选的不带显示屏的款式）•IP65 外壳•24 V AC/DC 电源输入•Indigo201：3 个模拟输出（mA 或 V）•Indigo202：RS-485，带有Modbus ® RTU•2 个可配置的继电器维萨拉 Indigo200 系列数据处理单元是一种主机设备，它显示来自维萨拉 Indigo 兼容探头的测量值，同时也可通过模拟信号、Modbus RTU 通信或继电器将这些测量值传输到自动化系统。
Mitsubishi Electric 工业机器人 MELFA RV-8CRL 产品介绍说明书
FACTORY AUTOMATIONMITSUBISHI ELECTRICINDUSTRIAL ROBOTMELFA RV-8CRLAllied Automation 800-214-0322Pursuing practical performanceUses an HK motor, the latest servomotor from Mitsubishi Electric. This allows improved torque characteristics, accuracy, and responsiveness while substantially reducing the size and weight. This adds up to much better robot performance and greater compactness.Continuous operation performanceLighter weight and improved heat release translate to improved continuous operation performance.Beltless coaxial drive mechanismA coaxial drive mechanism without belts is used for transmission to each axis (excluding the J4 and J5 axes).Simplification of the structure has improved transmission efficiency and reliability while also improving the ease of maintenance.No backup batteryThe use of the new HK motor eliminates the need for a battery to back up the robot’s internal encoder.This eliminates the cost and effort of regularreplacement as well as the risk of losing origin coordinates due to battery failure.A signal wire and air piping that can be used for gripper control, etc., are built in from the base to the forearm. Both ends of the signal wire haveuniversal D-sub connectors for use in various applications.Highest-in-class load capacityFeaturing a highest-in-class maximum load capacity of 8 kg, these robots boast a lighter-weight structure and reduced unit weight thanks to their simplified drive system and optimized arm structure, resulting in enhanced load capacity.Largest-in-class effective working areaOffers highest-in-class maximum reach radius of 931 mm. The use of a no-offset lower arm structure eliminating the J2-axis joint offset minimizes the interference region in the minimum turning radius and provides the largest-in-class effective working area.Standard IP65 supportComes standard with environmental resistance features allowing installation in plants and equipment where dust or oil mist is present.Can be used in oil mist environmentsJ6-axis motorJ3-axismotor J2-axismotorJ1-axismotor Slim & Compact Robot Offering a High Level of Utility and DesignSlim & compactA smooth, curved design complements the slim arm and compact joints. The external design is marked by minimalist, functional design.*Installation pitch:□160 mm (same as RV-4FR and 20% less than RV-7FR)Protrusionless structureIn addition to a slim, compact exterior and small robot base, its structure features minimal protrusions to the front, back, and sides, resulting in reduced interference with surroundings when the robot operates. This makes it suited to integration with automation cells and manufacturing equipment.1High-performance Controller Makes MELFA More IntelligentSafety monitoring functionWe will prepare a safety function compliant with international standards that simplifies risk assessments.Safety I/OExtends redundant safety I/O to 8 inputs and 4 outputs. Enablesdevelopment of various safety systems.Safety logic editingSimplifies development and operation of safety systems with safety logic editing.●Program editing and debugging ●Simulation function ●3D viewer●Monitoring function●Melfa RXM.ocx communication middlewareTrackingRobot tracks workpiece on conveyor, allowing transfer, alignment, and assembly without stopping conveyor.Additional axis controlBuild user mechanism controlling additional axes simultaneously with robot such as robot drive axis or turntable or separate from robot such as loader or positioning device. Control up to 8 axes. Our MELSERVO (MR-J4-B)servomotor can be used with additional axes.Robot mechanism thermal compensation functionMeasures the temperature of the robot arm and automatically corrects errors arising from thermal expansion of the arm.Callibration assistance functionAutomated calibration translates to simplification of installation of two-dimensional vision sensor and improvement of operational accuracy.Coordinated control of additional axesLinks robot and travel base for high-accuracy processing and assembly at specific speed.Also supports optional MELFA SmartPlusfunctional enhancement *1Comes standard with tracking and additional axis control PC software supporting everything from robot system designto installation, debugging, operation, and maintenance●Vision sensor configuration tool allows easy calibration of robot and camera ●Easy connection of robot and camera via Ethernet ●Easy control via robot program vision control commandSimultaneous controlmechanismsMechanism 1Mechanism 2Mechanism 3Up to 3Additional axesVision sensorSupports multiple conveyors simultaneously (up to 8)*1: Coming soonRobot controllerRobotLaser scannerTeaching boxRT ToolBox3Emergency stopArea sensorLamp2SpecificationsMechanical interfaceInternal wiring/pipingWiring/pipingInstallation dimensionsExternal dimensions/operating rangeMain Specifications15-pin D-sub AWG#24 (0.2mm ) ×15φ6 air joint (2)φ6 hose (2)Black Green Red Brown Yellow OrangeBlue Purple Gray Pink Light blue (Black)/Yellow (Black)/White (Black)/Blue 123456789101112131415123456789101112131415①②Baseφ6 air joint ①Tool wiring connector (15-pin D-sub)Tool wiring connector (15-pin D-sub)φ6 air joint ②Air pipe (2)φ6 air joint ①BaseUpper armForearmView A15-pin D-subForearmφ6 air joint ②Tool wiring (15)Tool wiring connectorRz25R z 25(Installation reference plane)(I n s t a l l a t i o n r e f e r e n c e p l a n e )1908080(160)978080(160)9797φ40h 8φ20H 7D6P .C.D .φ31.545°4-M5 thread depth 8φ5H7D84-φ9 installation hole*1: The wall mounting specifications are special specifications that restrict the operating range of the J1 axis.*2: “Maximum load capacity” is the maximum weight that can be loaded under the limitation of a mechanical interface having a downward attitude (within ±10° of the vertical position).View BP point operating areaP pointR 930.5-170°+170°R 219.315071R 150930.5930.51320.5244.4634.4930.585470390450100R 930.5+110°-110°Control point (R point)P point operating areaP point Downward limit of wristR 219.3102028020A71BWrist's downward singularity boundarySpace for the cable connectionMinimum: 310250256White 3External dimensions*2: Power supply voltage variability is within 10%.*3: Power capacity is recommended value.Note that power capacity does not include making current when turning on. Power capacity is an estimate.*4: Grounding work is to be performed by the customer.*5: Recommended USB cable (USB Type A, USB Mini-B Type): MR-J3USBCBL3M (Mitsubishi Electric), GT09-C30USB-5P (Mitsubishi Electric System & Service)*6: Mode select switch is to be provided by the customer.Controller specificationsStand-alone robot controllerRobot controller can be used for centralized control.430(30)30(3.5)37099.59642534045(40)(45)CR800-D4System configurationParallelinput-output interfaceinput-output unitExternal input-output cableCC-Link <Standard devices>GOT Pulse encoderServo Network R56TBR32TBsupport(SmartPlus)Machine cableController protection box<Functional options>Force sensor set MELFA-3D Vision⑨⑥RT ToolBox3 mini RT ToolBox3RT ToolBox3 Pro⑭②Encoder interfaceRobotRobot controller*1: Coming soon5OptionsController optionsFunctional optionsExpanded software functions*1: Coming soon6L (NA )09102ENG-BAll trademarks acknowledged.Printed December 2019HEAD OFFICE: TOKYO BLDG., 2-7-3 MARUNOUCHI,CHIYODA-KU, TOKYO 100-8310, JAPANMitsubishi Electric Corporation Nagoya Works is a factory certified for ISO 14001 (standards for environmental management systems) and ISO 9001(standards forquality assurance management systems)Global Partner. Local Friend.Allied Automation 800-214-0322。
华为FusionSolar产品说明书
Battery Module (Energy Optimizer Included）
LUNA2000-5/10/15-S0
2.5
5
10
String Battery Solution
Power (kw)
DC Arc Fault Has Been Found the Major Cause of Fire in PV System
130GW+
Huawei inverters deployed worldwide
85% 100% 100% 100%
Higher Self-consumption
with Smart String ESS
Flexible
5kWh per pack scalable for flexible investment
Excellent product quality with extendable warranty to protect your investment
Standard 10 Years Warranty Extendable to Max. 20 Years
Available Now
FusionSolar Smart PV Management System
（Three Phase） SUN2000-3/4/5/6/8/10KTL-M1
Smart Energy Controller
Convert solar energy into electricity to power your house
Get FusionSolar with peace in mind
170+
Countries & regions with Huawei products and services
潍坊海瑞斯NOVTDS11SA顶驱天意顶驱北石景宏顶驱配件
斯石油坊海瑞斯石油设备有瑞斯石油设备有限公油设备有限公司备有限公司目录 /CONTENTS关于我们About Us产品和服务Products & Services展望未来Look Ahead市场分析Market Analysis瑞斯石油设潍坊海石油坊海瑞斯瑞斯石油石油设备有备有限公限公司One关于我们企业概况 潍坊海瑞斯石油装备有限公司，简称“海瑞斯”（英文名称：Weifang Heris Petroleum Equipment CO., Ltd）。
公司成立于2010年，公司主要从事顶驱配件销售及技术服务，其中有varco TDS -7S型，TDS-8SA型、TDS-9SA型、TDS-10SA型和TDS-11SA型顶驱，以及国内天意TPEC，北石BMP，景宏JH等品牌顶驱的配给及技术服务，是一家以石油设备进出口及国内销售为主体，石油钻井后勤保障、技术服务为载体，并能满足国内外石油设备应急物资需求急剧增长的需要，是我国石油设备物资领域里的一家发展迅速、极具潜力的新兴专业型公司。
公司本着“开拓创新、精益求精”的企业精神，以严谨的工作姿态和完善的工作体制、从合同执行过程中的精细化管理到产品出入库的严格监控，再到至善至美的售后服务，每一环节都严格认真的履行ISO:9001-2008质量管理体系的要求，公司所有出厂的系列产品都能满足API的国际标准，从而荣获中国互联网中心颁发的“中国信用企业认证体系示范单位”和阿里巴巴“诚信供应商”等荣誉称号；同时也是中国石油集团公司、中国石化集团公司和中化集团公司的合格供应商，是长期合作的诚信伙伴。
油设备备有限公司合作伙伴潍坊海瑞斯石油装备有限公司一直是中海油合格供应商，并具有长期维修和配件供应协议，同时也是为中国石油集团公司、中国石化集团公司和中化集团公司等公司的提供顶驱维修和配件供应，也是其长期合作的诚信伙伴。
稳健发展期高速发展期战略转型期摸索前进期发展历程2010-20122013-20142015-20162017--潍坊海瑞斯潍坊海瑞斯石油设潍坊海瑞斯石油设备有海瑞斯石油设备有限公司斯石油设备有限公司设备有限公有1423企业文化提供最优质的产品，做最诚信的服务。
VARCO TDS-11SA 109523
VARCO TDS-11SA 109523范工V ARCO 189—598---18—758VARCOTDS-8SA型顶驱配件TDS-9SA型顶驱配件TDS-10SA型顶驱配件TDS-11SA型顶驱配件IDS-4A型顶驱配件TDS-4S型顶驱配件TDS-4H型顶驱配件TDS-1000顶驱配件VARCO 30158011 114375-1VARCO顶驱配件988981 belts Model DG-10 Brandt （A Varco company）除气器配件2P2 fiberglass leaf Model DG-10 Brandt （A Varco company）除气器配件泥浆伞43I3 degasser float assembly Model DG-10 Brandt （A Varco company）除气器配件浮子及传动5754 VACUUM PLUMBING Model DG-10 Brandt （A Varco company）除气器配件真空管道577VARCO 30175017-86-4-3-BVARCOGOOSENECK (MUD S-PIPE) 5K PSI FOR TOP DRIVE, MODEL: VARCO TDS-11SA 109523ItemNO. Description Qty. P/NP/F”NATIONAL”TRIPLEX SLUSH PUMPP/F”NATIONAL”TRIPLEX SLUSH PUMP,TYPE 12-P-160 SIZE 7×12 IN.,SER.NO.353.355REF.NATIONAL OILWELL CO.NDC-008DISCHARGE CONNECTOR1 SPACER STUDDED DISCHARGE 6 12922622 MODULE STUDDED SUCTION 6 1292243 华高VarcoVARCO传动器组件125594液力箱配件F-1600 高压安全阀总成泥浆泵安全阀RESET RELIEF VALVE TYPE "C"型，调压范围1500-5000psi 法兰连接NARIONAL OIL VARCO冲管总成号:SW-703429-G1U盘根:SW-70-106-24冲管:SW-75-106-24华高VarcoVARCO上防喷器110103-500钻机顶驱装置配件VARCO 11SA 销钉56405-20-C TDS-11SA顶驱用安全销VARCO56405-20-CVarcoP.N/114859P.N/99498-2Varco 16401-2 PYRAMID,TONG,DIE(TYPE"C"ROTARY-TONG) Varco冲管123289Varco冲管盘根123292Varco旋塞维修包99498-2Varco顶驱液压下旋塞总成110103-502Varco顶驱液压上旋塞总成114706-502equivalent to NOVWashpipe Assembly3" Bore / 7500 PSIVarco P/N 91249Varco P/N 30123290equivalent to NOVPacking Kit for 3”- 7500 PSI WashpipeVARCOGOOSENECK (MUD S-PIPE) 5K PSI FOR TOP DRIVE, MODEL: VARCO TDS-11SA 109523TDS-11SA 弯头81153 Qty: 1 pcs VARCO TDS-11SA VARCO修理包114859VARCONUT\50508-C\30125052 50508-CRETAINER BOLT\VARCO 12211-2VARCO熔断器122627-54熔断器122627-55CASING ELEVATOR SPIDERS50364Y 250 TON ELEV/SPIDER33492Y 350 TON ELEV/SPIDER13800Y 500 TON ELEV/SPIDERWE ALSO HAVE MOST SIZES OF SLIPS, GUIDES, ETC IN STOCKCASING TONGS116825-007 WEATHERFORD 24-50 CASING TONG 116613-001 24" ROTARY ASSY. FOR 24-50 TONG 116514-001 24" JAW SET109612-001 20" JAW SET101769-001 18-5/8" JAW SET109606-001 16" JAW SET104817-001 13-3/8" JAW SET104805-001 10-3/4" JAW SET101753-001 9-5/8" JAW SET101758-001 7" JAW SET113986-015 WEATHERFORD 16-25 CASING TONG 100088-001 4" JAW SET100089-001 4-1/2" JAW SET100090-001 5" JAW SET100091-001 5-1/2" JAW SET103757-002 6-5/8" JAW SET103758-002 7" JAW SET109598-002 7-5/8" JAW SET109599-002 8-5/8" JAW SET103762-002 9-5/8" JAW SET109587-002 10-3/4" JAW SET109588-002 11-3/4" JAW SET109592-002 13-3/8" JAW SET109596-002 16" JAW SETTUBING TONGS45000-100 WEATHERFORD OIL COUNTRY 45000 WITH MANUAL BACKUP57853-150-50 WEATHERFORD OIL COUNTRY 57802 WITH HYD BACKUPDRILL PIPE SPINNERS/KELLY SPINNERS73109 SSW-40 SPINNING WRENCH19000-6 SSW-30 SPINNING WRENCHPOWER SLIPS18172-55-50 PS-15 POWER SLIP FOR 5" DPMASTER BUSHINGS6600-1 VARCO MPCH MASTER BUSHING FOR 37-1/2" NATIONAL TABLE1804-5 VARCO MSPC MASTER BUSHING FOR 27-1/2" NATIONAL TABLEMASTER BUSHING INSERT BOWLS1810 #3 INSERT BOWL FOR 27-1/2 MSPC6608 #3 INSERT BOWL FOR MPCH MASTER BUSHING 6609 INSERT BOWL #2 10-3/4"X9-5/8" FOR MPCH 6610 INSERT BOWL #1 13-3/8"X11-3/4" FOR MPCHDRILL PIPE ELEVATORS200680Y116 2-3/8" 150 TON RGG CL DP ELEV. 200680Y118 2-7/8" 150 TON RGG CL DP ELEV. 200680Y120 3-1/2" 150 TON RGG CL DP ELEV. 35005Y120 3-1/2" 250 TON MGG CL ELEV.35005Y121 4" 250 TON MGG CL ELEV.35005Y122 4-1/2" 250 TON MGG CL ELEV.35005Y123 5" 250 TON MGG CL ELEV.31068Y121 4" 350 TON GG CL ELEV.31068Y122 4-1/2" 350 TON GG CL ELEV.31068Y123 5" 350 TON GG CL ELEV.31068Y124 5-1/2" 350 TON GG CL ELEV.200056Y123 5" 350 TON GG CL ELEV. WITH WEAR BUSHING70013Y123 5" 500 TON HGG CL ELEV.70013Y124 5-1/2" 500 TON HGG CL ELEV.70013Y789 5-7/8" 500 TON HGG CL ELEV.70013Y740 6-5/8" 500 TON HGG CL ELEV.TUBING ELEVATORS50006310Y158 2-3/8" 100 TON TMA CL PLAIN TUBING ELEV.50006310Y159 2-3/8" 100 TON TMA CL UPSET TUBING ELEV.50006310Y160 2-7/8" 100 TON TMA CL PLAIN TUBING ELEV.50006310Y161 2-7/8" 100 TON TMA CL UPSET TUBING ELEV.50006310Y162 3-1/2" 100 TON TMA CL PLAIN TUBING ELEV.50006310Y163 3-1/2" 100 TON TMA CL TUBING ELEV. 50006310Y167 4-1/2" 100 TON TMA CL UPSET TUBING ELEV.50006310Y129 4-1/2" 100 TON TMA CL PLAIN TUBING ELEV.201360Y167 4-1/2" 200 TON RGA CL TUBING ELEV.SIDE DOOR CASING ELEVATORS33734Y159 2-3/8" UPSET TUBING 65 TON SLX SIDE DOOR ELEV.31239Y136 7" 150 TON SLX SIDE DOOR ELEV.33950Y141 9-5/8" 150 TON SLX SIDE DOOR ELEV. 33950Y142 10-3/4" 150 TON SLX SIDE DOOR ELEV. 33982Y144 13-3/8" 150 TON SLX SIDE DOOR ELEV. 33632Y146 18-5/8" 150 TON SLX SIDE DOOR ELEV. 33632Y147 20" 150 TON SLX SIDE DOOR ELEV.52755Y644 30" 150 TON SLX DD SIDE DOOR ELEV.E33632-146 18-5/8" 150 TON SLX SIDE DOORELEV.(ACCESS)E33632-147 20" 150 TON SLX SIDE DOOR ELEV.(ACCESS) 50006430Y129 4-1/2" 150 TON SMX SIDE DOOR ELEV. 50006430Y131 5" 150 TON SMX SIDE DOOR ELEV. 50006430Y132 5-1/2" 150 TON SMX SIDE DOOR ELEV. 50006455Y142 10-3/4" 150 TON SMX SIDE DOOR ELEV. 50006455Y144 13-3/8" 150 TON SMX SIDE DOOR ELEV. 50006426Y136 7" 250 TON SMX SIDE DOOR ELEV. 50006740Y141 9-5/8" 250 TON SMX SIDE DOOR ELEV. 50006740Y144 13-3/8" 250 TON SMX SIDE DOOR ELEV. 50006450Y145 16" 250 TON SMX SIDE DOOR ELEV. 50006460Y146 18-5/8" 250 TON SMX SIDE DOOR ELEV.50006460Y147 20" 250 TON SMX SIDE DOOR ELEV. 50006460Y630 24" 250 TON SMX SIDE DOOR ELEV. 50006440Y141 9-5/8" 350 TON SMX SIDE DOOR ELEV. 50006440Y144 13-3/8" 350 TON SMX SIDE DOOR ELEV.DRILL COLLAR ELEVATORS32754Y435 4-3/4" 150 TON TA ELEV. FOR ZIP LIFT DRILL COLLAR32754Y135 6-1/2" 150 TON TA ELEV. FOR PLAIN DRILL COLLAR32754Y387 6-3/4" 150 TON TA ELEV. FOR ZIP LIFT DRILL COLLAR32754Y336 8" 150 TON TA ELEV. FOR ZIP LIFT DRILL COLLAR5 TON SINGLE JOINT PICK-UP ELEVATORS70499Y158 2-3/8" SJL SINGLE JOINT ELEV. PLAIN TBG 70499Y159 2-3/8" SJL SINGLE JOINT ELEV. UPSET TUBING 70499Y160 2-7/8" SJL SINGLE JOINT ELEV. PLAIN TBG. 70499Y161 2-7/8" SJL SINGLE JOINT ELEV.70499Y162 2-7/8" SJL SINGLE JOINT ELEV. PLAIN TBG. 70499Y163 3-1/2" SJL SINGLE JOINT ELEV. UPSET TUBING70500Y129 4-1/2" SJL SINGLE JOINT ELEV.70500Y167 4-1/2" SJL SINGLE JOINT ELEV. FOR UPSET TUBING70500Y131 5" SJL SINGLE JOINT ELEV.70500Y132 5-1/2" SJL SINGLE JOINT ELEV.70501Y136 7" SJL SINGLE JOINT ELEV.70501Y137 7-5/8" SJL SINGLE JOINT ELEV.70502Y141 9-5/8" SJL SINGLE JOINT ELEV.70502Y142 10-3/4" SJL SINGE JOINT ELEV.70503Y144 13-3/8" SJL SINGLE JOINT ELEV.70504Y145 16" SJL SINGLE JOINT ELEV.70504Y146 18-5/8" SJL SINGLE JOINT ELEV.70504Y147 20" SJL SINGLE JOINT ELEV.70505Y630 24" SJL SINGLE JOINT ELEV.200009Y412 4-1/2" SPL SJ ELEV. FOR 18DEG. D.P. 200009Y500 5" SPL SJ ELEV. FOR 18DEG D.P.E20030-123 5" 7.5 TON BOTTLENECK 18DEG. DP SINGLE JOINT ELEV.E39043-146 18-5/8" SINGLE JOINT ELEV(ACCESS)E39043-147 20" SINGLE JOINT ELEV(ACCESS) SLIP TYPE TUBING AND CASING ELEVATORS29328Y MYT 40 TON SLIP TYPE ELEVATOR 50006582Y 75 TON YT SLIP TYPE ELEV. 23108Y6 2-3/8" YT SLIP ASSY.23108Y4 2-7/8" YT SLIP ASSY.23108Y3 3-1/2"X2-7/8" YT SLIP ASSY. 23108Y5 3-1/2" YT SLIP ASSY.24140Y 75 TON YC SLIP TYPE ELEV. 34931Y 4-1/2"X3-1/2" YC SLIP ASSY. 24072Y5 4-1/2" YC SLIP ASSY.24072Y2 5-1/2" YC SLIP ASSY.24077Y7 6-5/8" YC SLIP ASSY.24077Y1 7" YC SLIP ASSY.200360Y MYC 125 TON SLIP TYPE ELEV. BJ55310Y HYC 200 TON SLIP TYPE ELEV. 55511Y 4-1/2" HYC SLIP ASSY.55512Y 5" HYC SLIP ASSY.55513Y 5-1/2" HYC SLIP ASSY.55515Y 7" HYC SLIP ASSY.70009Y 7-5/8" HYC SLIP ASSY.39284Y 150 TON HYT SLIP TYPE ELEV. 39258Y2 3-1/2" HYT SLIP ASSY.39259Y2 2-7/8" HYT SLIP ASSY.39259Y4 2-3/8" HYT SLIP ASSY.WELDLESS AND TOOLPUSHER LINKS/BAILS16363Y1108 2-1/4"X108" 250 TON LINKS26940Y1108 2-3/4"X108" 350 TON LINKS26940Y1120 2-3/4"X 120" 350 TON LINKS26940Y1132 2-3/4"X132" 350 TON LINKS26940Y1144 2-3/4"X144" 350 TON LINKS26940Y1180 2-3/4"X180" 350 TON LINKS26940Y1192 2-3/4"X192" 350 TON LINKS26940Y1216 2-3/4"X216" 350 TON LINKS25469Y1144 3-1/2"X144" 500 TON LINKS25469Y1180 3-1/2"X180" 500 TON LINKS25469Y1192 3-1/2"X192" 500 TON LINKS25469Y1216 3-1/2"X216" 500 TON LINKS25469Y1264 3-1/2"X264" 500 TON LINKS20036 2"X 36" 100 TON PERFECTION LINKS (BVM)20042 2"X 40" 100 TON PERFECTION LINKS (BVM)20048 2"X 48" 100 TON PERFEFTION LINKS (BVM)20060 2"X 60" 100 TON PERFECTION LINKS (BVM)37355-1060 1-3/4"X60" 150 TON TOOLPUSHER LINKS(WFT. OIL COUNTRY)37355-1072 1-3/4"X72" 150 TON TOOLPUSHER LINKS(WFT. OIL COUNTRY)37355-1084 1-3/4"X84" 150 TON TOOLPUSHERLINKS(WEATHERFORD)37355-1096 1-3/4"X96" 150 TON TOOLPUSHERLINKS(WEATHERFORD)CAVINS TUBING/CASING SPIDERSTC100-S-HD MDL C-HD AIR OP SPIDER(1.315-5-1/2")TC600-FCR-2 2-3/8"-3-1/2" TYPE FCR SLIP LESS INSERTS TC600-FCR-3 3-1/2"-4-1/2" TYPE FCR SLIPS LESS INSERTS TC651-3.500X2.375 FCI INSERTS FOR 2-3/8" TBG(4/SET) TC651-3.500X2.875 FCI INSERTS FOR 2-7/8" TBG(4/SET) TC650-3.500 FCI INSERTS FOR 3-1/2" TBG(4/SET)TC651-4.500X4.000 FCI INSERTS FOR 4" TBG(4/SET)TC650-4.500 FCI INSERTS FOR 4-1/2" TBG(4/SET)TF100-S MDL F AIR OP SPIDER(2-3/8"-8-5/8")TF600-FCR-3.500 2-3/8"-3-1/2" TYPE FCR SLIP LESS INSERTSTF600-FCR-5.500 4"-5-1/2" TYPE FCR SLIPS LESS INSERTS TF600-FCR-7.625 6-5/8"-7-5/8" TYPE FCR SLIPS LESS INSERTSTF650-7.625 7-5/8" FCI INSERTS FOR F SPIDER(4/SET) TF651-7.625X7.00 7" FCI INSERTS FOR F SPIDER(4/SET) TF650-5.500 5-1/2" FCI INSERTS FOR F SPIDER(4/SET) TF651-5.500X4.500 4-1/2" FCI INSERTS FOR FSPIDER(4/SET)TF650-3.500 3-1/2" FCI INSERT FOR F SPIDER(4/SET)TF651-3.500X2.875 2-7/8" FCI INSERTS FOR FSPIDER(4/SET)TG650-13.375 13-3/8" FCI INSERT FOR G SPIDER(4/SET) TG650-9.625 9-5/8" FCI INSERT FOR G SPIDER(4/SET) TG651-7.625-7.000 7" FCI INSERTS FOR G SPIDER(4/SET) TG651-5.500X5.00 5" FCI INSERTS FOR G SPIDER(4/SET) TG651-5.500X4.00 4" FCI INSERTS FOR G SPIDER(4/SET) TG650-3.500 3-1/2" FCI INSERTS FOR G SPIDER(4/SET) TG651-3.500X2.875 2-7/8" FCI INSERTS FOR G SPIDER(4/SET)MANUAL TONGS200071(12 ON ORDER) HT-100 TONG200540+50(14 ON ORDER) HT- 65 TONG200560 HT-55 TONG200560-1 HT-55 TONG W/ SHORT LEVER200620-2(27 ON ORDER) HT-35 TONG200620-3 HT-35 TONG W/ SHORT LEVERFULL RANGE OF LUG JAWS FOR ALL TONGS IN STOCKCASING SLIPS套管卡瓦5301 7" CMS-XL5303 7-5/8" CMS-XL5305 8-5/8" CMS-XL5307 9-5/8" CMS-XL CASING SLIPV5309 10-3/4" CMS-XL CASING SLIP5313 13-3/8" CMS-XL CASING SLIP5325 16" CMS-XL CASING SLIP5333 18-5/8" CMS-XL CASING SLIP5329 20" CMS-XL CASING SLIP5331 24" CMS-XL CASING SLIP5342 30" CMS-XL CASING SLIPDRILL COLLAR SLIPS2572 3"-4" DCS-S DC SLIP2573 4"-4-7/8" DCS-S DC SLIP2552 4-1/2"-6" DCS-R DC SLIP2550 5-1/2"-7" DCS-R DC SLIP2501 5-1/2"-7" DCS-L DC SLIP2503 6-3/4"-8-1/4" DCS-L DC SLIP2507 8"-9-1/2" DCS-L DC SLIP2530 8-1/2"-10" DCS-L DC SLIPWTM-709-300-0100 WOOLEY 3"-4-1/4" TYPE A DC SLIP WTM-709-660-0100 WOOLEY 6-3/4"-8-1/4" TYPE A DC SLIPROTARY DRILL PIPE SLIPS15524+50 3-1/2"X2-3/8" SDML ROTARY SLIP15523 3-1/2"X2-7/8" SDML ROTARY SLIP15522 3-1/2"X3-1/2" SDML ROTARY SLIP15565 4-1/2"X4-1/2" SDML ROTARY SLIP15569+50 5"X5" SDML ROTARY SLIPV15515 4-1/2"X3-1/2" SDXL ROTARY SLIPV15513 4-1/2"X4-1/2" SDXL ROTARY SLIP15518 5"X4" SDXL ROTARY SLIPV15516 5"X5" SDXL ROTARY SLIP15521 5-1/2"X4-1/2" SDXL ROTARY SLIP15520 5-1/2"X5" SDXL ROTARY SLIPV15519 5-1/2"X5-1/2" SDXL ROTARY SLIP86722-1 7"X5-7/8" SDXL ROTARY SLIP86720 7"X6-5/8" SDXL ROTARY SLIP86719 7" SDXL ROTARY SLIP50006021-500 5-1/2"X5" SDHL ROTARY SLIP 50006021-550 5-1/2" SDHL ROTARY SLIP50006040-588 6-7/8"X5-7/8" SDHL ROTARY SLIP 50006040-663 6-7/8"X6-5/8" SDHL ROTARY SLIPSAFETY FLEX HANDLESAES-0811 WPSI SAFETY FLEX HANDLE SD TYPEAES-0812 WPSI SAFETY FLEX HANDLE TYPE A SLIP AES-0813 WPSI SAFETY FLEX HANDLE DU FRONT HANDLE(2PER SLIP)AES-0814 WPSI SAFETY FLEX HANDLE DU REAR HANDLE AES-0815 WPSI SAFETY FLEX HANDLE TYPE WOOLEY B AES-0816 WPSI SAFETY FLEX HANDLE TYPE WOOLEY XLMULTIPURPOSE SAFETY CLAMPS33030+50 2-7/8"-4-1/2" MP-S SAFETY CLAMP33031 4"-5" MP-S SAFETY CLAMP33011+50 4-1/2-5-5/8" MP-R SAFETY CLAMP33012 5-1/2"-7" MP-R SAFETY CLAMPV33013 6-3/4"-8-1/4" MP-R SAFETY CLAMPV33014 8"-9-1/4" MP-R SAFETY CLAMP33015+50 9-1/4"-10-1/2" MP-R SAFETY CLAMP33016 10-1/2"-11-1/2" MP-M SAFETY CLAMP33018+50 12-1/2"-13-5/8" MP-M SAFETY CLAMP33019 13-5/8"-14-3/4" MP-M SAFETY CLAMP33021 15-7/8"-17" MP-L SAFETY CLAMP33023 18-1/8"-19-3/8" MP-L SAFETY CLAMPTYPE C SAFETY CLAMPCDI-3302 4-1/2"-5-5/8" TYPE C SAFETY CLAMPCDI-3303 5-1/2"-6-5/8" TYPE C SAFETY CLAMPCDI-3304 6-1/2"-7-5/8" TYPE C SAFETY CLAMPCDI-3305 7-1/2"-8-5/8" TYPE C SAFETY CLAMPCDI-3306 8-1/2"-9-5/8" TYPE C SAFETY CLAMPCDI-3307 9-1/2"-10-5/8" TYPE C SAFETY CLAMPPACKING ELEMENTS AND RAMS FOR BOP150799+20 20"-3 AND 21"2 PACKING ELEMENT(SHAFFER) 152693+20 13-10M NITRILE PACKING ELEMENT(SHAFFER) 150576+20 13-5/8" 5M NITRILE PACKINGELEMENT(SHAFFER)155070+20 13-5M SPARE PARTS KIT FOR SBOP(SHAFFER)150810+20 11"5M NITRILE PACKING ELEMENT(SHAFFER) 150847+20 7" 3/5M NITRILE PACKING ELEMENT(SHAFFER)WELL SERVICE ROD HOOKS, ELEVATORS & TONGS 27725 CAVINS/BJ 5/8-3/4 NO KINK ROD ELEVATOR 27726 CAVINS/BJ 3/4-7/8 NO KINK ROD ELEVATOR 27727 CAVINS/BJ 1" NO KINK ROD ELEVATOR27727-1 CAVINS/BJ 1-1/8" NO KINK ROD ELEVATOR 31982 CAVINS/BJ R-35 TON ROD HOOK32040 CAVINS/BJ R-20 ROD HOOK27841-5 CAVINS/BJ MARK V ROD TONG, HYD OPMCL500-1-7/16 CAVINS "CL" DEPTHOMETER F/7/16"-5/8" OD LINEST-80 SPARES AND WEARABLES30160614 ST-80 KNURLED ROLLERS30160614-AM ST-80 KNURLED ROLLERS(AFTERMARKET) 30174222 ST-80 UPPER DIE SETWP30174222 WP ST-80 UPPER DIE SET(AFTERMARKET) 30172029 ST-80 LOWER DIE SETWP30172029 WP ST-80 LOWER DIE SET(AFTERMARKET)MISC30111013-KIT KIT, FILTER, GEAR OIL(FILTER AND O-RING) 30123289 WASHPIPE, 3" BORE, 7500PSI30123290-PK SEAL KIT, WASHPIPE PACKING, 7500 PSI 5771 WPSI 8" STABILIZER BUSHING(BOWL SAVER)WP1021 WPSI MSPC LIFTING SLING(2 LEG)WP6699 WPSI MPCH LIFTING SLING(4 LEG)WP34568-5 WPSI SWIVEL SUSPENSION F/SINGLE JOINT ELEV. W/LOAD TESTWPSTG0658-4.5IF WPSI STABBING GUIDE, COMPLETE6-5/8 TJ 5" PIPE 4.5 IF CONNWP250369-KIT-AM WPSI HT TONG SAFETY CAP KITWP20000-SH-2 WPSI HOCKEY PUCK STYLE TONG SAFETY HANDLEWP618-101-0829 WPSI DUMBELL STYLE TONG SAFETY HANDLEWE ALSO HAVE ALL INSERTS, TONG DIESCIRCULAR BUTTONS, ST-80 SPARES AND TOP DRIVE SPARES。
毛斯产品说明书：EDS-205A 208A系列5 8端口工业级以太网交换机
The EDS-205A/208A series are 5 and 8-port industrial Ethernetswitches that support IEEE 802.3 and IEEE 802.3u/x with 10/100M full/half-duplex, MDI/MDI-X auto-sensing. The EDS-205A/208A switchesprovide 12/24/48 VDC (9.6 to 60 VDC), 18 to 30 VAC redundant powerinputs that can be connected simultaneously to live AC/DC powersources. These switches have been designed for harsh industrialenvironments, such as in maritime (DNV/GL/LR/ABS/NK), rail wayside,highway, or mobile applications(EN 50121-4/NEMA TS2/e-Mark), orhazardous locations (Class I Div. 2, ATEX Zone 2) that comply withIntroductionEDS-205A/208A SeriesSpecificationsFCC, UL, and CE standards.The EDS-205A/208A switches are available with a standard operatingtemperature range from -10 to 60°C, or with a wide operatingtemperature range from -40 to 75°C. All models are subjected toa 100% burn-in test to ensure that they fulfill the special needs ofindustrial automation control applications. In addition, theEDS-205A/208A switches have DIP switches for enabling or disablingbroadcast storm protection, providing another level of flexibility forindustrial applications.TechnologyStandards:IEEE 802.3 for 10BaseTIEEE 802.3u for 100BaseT(X) and 100BaseFXIEEE 802.3x for Flow ControlProcessing Type: Store and ForwardFlow Control: IEEE 802.3x flow control, back pressure flow controlSwitch PropertiesMAC Table Size: 1 KPacket Buffer Size: 512 KbitInterfaceFiber Ports: 100BaseFX ports (SC/ST connector, multi-mode,single-mode)RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplexmode, and auto MDI/MDI-X connectionDIP Switches: Enable/Disable broadcast storm protectionLED Indicators: Power, 10/100M (TP port), 100M (fiber port)Power RequirementsInput Voltage: 12/24/48 VDC (9.6 to 60 VDC), 18 to 30 VAC (47 to 63Hz), redundant dual inputsInput Current:EDS-205A: 0.1 A @ 24 VEDS-205A-M/S: 0.11 A @ 24 VEDS-208A: 0.13 A @ 24 VEDS-208A-M: 0.17 A @ 24 VEDS-208A-MM/SS: 0.22 A @ 24 VOverload Current Protection: 1.1 AConnection: 1 removable 4-contact terminal blockReverse Polarity Protection: PresentPhysical CharacteristicsHousing: Aluminum, IP30 protectionDimensions:EDS-205A: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in)EDS-208A: 50 x 115 x 70 mm (1.96 x 4.52 x 2.76 in)Weight:O rdering InformationOptional Accessories (can be purchased separately)DR-4524/75-24/120-24: 45/75/120 W DIN-Rail 24 VDC power suppliesMDR-40-24/60-24: 40/60 W DIN-Rail 24 VDC power supplies, -20 to 70°C operating temperatureWK-30: Wall mounting kit (EDS-205A series only)WK-46: Wall mounting kit (EDS-208A series only)RK-4U: 4U-high 19” rack mounting kitEMS:EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3,EN 61000-4-6 (CS) Level 3, EN 61000-4-8, EN 61000-4-11Marine: DNV, GL, LR, ABS, NKWheeled Vehicles: e-Mark (E1) (EDS-208A only)Traffic Control: NEMA TS2Rail Traffic: EN 50121-4Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6Note: Please check Moxa’s website for the most up-to-date certification status.MTBF (mean time between failures)Time:EDS-205A series: 3,040,784 hrsEDS-208A series: 2,428,212 hrsDatabase: Telcordia (Bellcore), GBWarrantyWarranty Period: 5 yearsDetails: See /warranty。
VARCO顶驱配件
油田方面：大庆、胜利、青海、新疆、辽河、长庆、吉林、塔里木、及吐哈等国内各大油田，同时还不断在各油田增设分公司或客户服务办事处。
我们的优势：“双环”（TWIN DISC）拥有多家世界著名设备品牌的代理经销权，诸如:卡特彼勒、底特律、沃尔沃、肯沃斯、万国、奔驰、艾里逊、德科瑞美、派克汉尼、力士乐、威格士等，可为用户提供更具有价格优势的纯正产品。
“双环”（TWIN DISC）拥有一支务实，积极，开拓，敬业，团结的年轻化、知识化的专业销售及技术工程师，配以信息化管理系统，为您提供更高效、专业的服务。
美国国民油井华高】16401-2华高顶驱配件NOV顶驱N.O.V华高VARCO 顶驱配件顶部驱动钻井装置有以下主要部件和附件构成：l.水龙头-钻井马达总成（关键部件之一）；2.马达支架/导向滑车总成（关键部件之一）；3.钻杆上卸扣装置总成（关键部件之一，它是体现顶部驱动钻井装置最大优点的设备）；4.平衡系统；5.冷却系统；6.顶部驱动钻井装置控制系统；7.可选用的附属设备。
其中水龙头-钻井马达总成包括下述主要部件：1.钻井马达和制动器（气刹车）2.齿轮箱（变速箱）；3.整体水龙头；4.平衡器陆上钻井作业需要不断提高效率，为适应这一需要，自1997年以来，Varco钻井系统公司根据最新驱动技术开发了创新的TDS-11SA顶部驱动钻井系统。
Varco公司利用交流变频技术的最新成就设计出了这种配备两台（350马力或400马力，取决于不同的需要）交流钻井电机的TDS-11SA顶部驱动钻井系统。
这种700马力或800马力的顶部驱动钻井系统可分别产生32500英尺?磅的钻井扭矩以及47000英尺?磅和56000英尺?磅的上扣/卸扣扭矩。
TDS-11SA结构紧凑，可以在标准的142英尺井架内安全运行，而且可产生高达500吨的提升力。
TDS-11SA采取便捷式设计，其安装和拆卸工作只需几小时。
它很容易安装在现有的钻机上，安装费用低，只需对井架作极少量的改动。
OMEGA Seamaster 三手表产品说明书
An OMEGA Te c h n o l o g i e s Co m p a n y DP18 SeriesModel DP18-DV2 / -DV3 / -DV4 / -DV5DC VoltmetersCCD1294APC5BFRONT VIEWFIG. 1FIG. 3SPECIFICATIONSDC INSTRUMENT, 3 DIGITS, WITH FOUR RANGES SELECTABLE ON THE SIGNAL CONDITIONER BY PLUG-IN JUMPERS. THE READING CAN NOT BE MODIFIED, THEREFORE THE DISPLAY WILL SHOW EXACTLY THE VALUE PRESENT AT THE INPUT SIGNAL.½SELECT THE DESIRED RANGE , CLOSING THE APPROPRIATE JUMPER (SELECTOR S1) ON THE SIGNAL CONDITIONER.CLOSE THE APPROPRIATE DECIMAL POINT JUMPER (FIG.5), CORRESPONDING TO THE RANGE SELECTED.OPTIONS AND POWER SUPPLIES AVAILABLE FOR DP18 SeriesCONTROL O UTPUT/COMMUNICATIONS O PTIONS Select a maximum of one option from each columnPOWER SUPPLY OPTIONSServicing USA and Canada: Call OMEGA Toll FreeUSA CanadaOne Omega Drive, Box 4047976 BergarStamford, CT 06907-0047Laval (Quebec) H7L 5A1Telephone: (203) 359-1660Telephone: (514) 856-6928FAX: (203) 359-7700FAX: (514) 856-6886Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA SM Customer Service: 1-800-622-2378 / 1-800-622-BEST SM Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN SMTELEX: 996404 EASYLINK: 62968934 CABLE: OMEGAServicing Europe: One OMEGA Drive, River BendThecnology CentreNorthbank, Irlam, ManchesterM44 5EX , EnglandTelephone: 44 (161) 777-6611 FAX: 44 (161) 777-6622RETURN REQUESTS / INQUIRIESDirect all warranty and repair requests/inquiries to the OMEGA ENGINEERING Customer Service Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA'S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return package and on any correspondence.OMEGA's policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and engineering.OMEGA is a registered trademark of OMEGA ENGINEERING, INC.© Copyright 1998 OMEGA ENGINEERING, INC. All rights reserved. This documentation may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without prior written consent of OMEGA ENGINEERING, INC.FOR WARRANTY RETURNS, please have the following information available BEFORE contacting OMEGA:1.P.O. number under which the product was PURCHASED.2.Model and serial number of the product under warranty, and3.Repair instructions and/or specific prob-lems relative to the product.WARRANTY/DISCLAIMEROMEGA warrants this unit to be free of defects in materials and workmanship and to give satisfactory service for a period of 13 months from date of purchase.OMEGA Warranty adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA's customers receive maximum coverage on each product. If the unit should malfunction, it must be returned to the factory for evaluation.OMEGA's Customer Service Department will issue an Authorized Return (AR) number imme-diately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective it will be repaired or replaced at no charge. However, this WARRANTY is VOID if the unit shows evidence of having been tampered with or shows evidence of being damaged as a result of excessive corrosion; or current; heat; moisture or vibration; improper specification;misapplication; misuse or other operating conditions outside of OMEGA's control. Components which wear or which are damaged by misuse are not warranted. These include contact points,fuses and triacs..OMEGA is pleased to offer suggestions on the use of its various products.However OMEGA neither assumes responsability for any omissions or errors nor assumes liability for any damages that result from the use of its products in accordance with information provided by OMEGA, either verbal or written.OMEGA only warrants that the parts manufactured by it will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTA-TIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive and the total liability of OMEGA with respect to this order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon which liability is based. In no even shall OMEGA be liable for consequential, incidental or special damages.CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a "Basic Component" under 10 CFR 21 (NRC), used in or with any nuclear installation or activity;or (2) in medical applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity, medical application, used in humans, or misused in any way.OMEGA assumes no responsibility as set forth in our basic WARRANTY/DISCLAIMER lan-guage, and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmlees from any liability or damage whatsoever arising out of the use of the Product(s) in such a manner.FOR NON-WARRANTY REPAIRS, consult OMEGA for current repair charges. Have the following information available BEFORE contacting OMEGA:1.P.O. number to cover the COST of therepair,2.Model and serial number of product, and3.Repair instructions and/or specificproblems relative to the product.。
铁钻工 VARCO TDS-11SA
铁钻工V ARCO TDS-11SA 资料：范工189 **** **** 知识q：149 4510 698TDS-8SA型顶驱配件TDS-9SA型顶驱配件TDS-10SA型顶驱配件TDS-11SA型顶驱配件IDS-4A型顶驱配件TDS-4S型顶驱配件TDS-4H型顶驱配件TDS-1000顶驱配件大钳牙板 VARCO 16402-6 VARCO 110022-1BVARCO 114869-SL-BLK VARCO 110022-1RVARCO 119561-SLVARCO 119561-PFVARCO 119561-PLVARCO 110022-1WVARCO 114869-PL-WHTVARCO 114869-PL-REDVARCO 114729-SL-676-18VARCO 114869-PL-BLKVARCO 114869-SL-WHTVARCO 114729-SL-676-20钻机顶驱装置配件 TDS-11SA 接头 56529-10-8-S钻机顶驱装置配件 TDS-11SA 接头体 940315-20钻机顶驱装置配件 TDS-11SA 三通 56706-12-S钻机顶驱装置配件 TDS-11SA O型密封圈 56530-12-12S钻机顶驱装置配件 VARCO TDS-11SA T型接头 56162-4-4-S 钻机顶驱装置配件 TDS-11SA O型密封圈 56555-4-4-S钻机顶驱装置配件 VARCO 11SA 三通 56706-8-S 美国NOV公司钻机顶驱装置配件 TDS-11SA O型密封圈 56555-6-6-S钻机顶驱装置配件 TDS-11SA 三通 56161-12-S钻机顶驱装置配件 TDS-11SA 弯头 56524-4-4-S钻机顶驱装置配件 VARCO 11SA 弯头 55506-8-6-S钻机顶驱装置配件 VARCO 11SA 弯头 55506-12-12S钻机顶驱装置配件 VARCO 11SA 弯头 55506-12-12S钻机顶驱装置配件 TDS-11SA 弯头 56506-16-16S钻机顶驱装置配件 TDS-11SA O型密封圈 56519-12-12S钻机顶驱装置配件 TDS-11SA 弯头 56519-4-6-S钻机顶驱装置配件 TDS-11SA 弯头 56519-4-6-S钻机顶驱装置配件 TDS-11SA 弯头 56519-6-4-S钻机顶驱装置配件 TDS-11SA O型密封圈 56519-4-4-S钻机顶驱装置配件 TDS-11SA 弯头 56519-12-12-S钻机顶驱装置配件 TDS-11SA 弯头 56519-10-8-S钻机顶驱装置配件 TDS-11SA 弯头 56519-10-12-S钻机顶驱装置配件 TDS-11SA 按钮 30087708-02常见的华高型号：30182002-50030182002-50130182002-503 30111013-KIT 30111013-4 30176000-3 30175768-1 30173887-500 91138 110853 91786-604 91786-605 59024P170028 59024P170026 59046P23E054 59024P230022 59044P170068 59044P170062 59044P230020 59044P170020 59044P170019 59044P170025 59045P230042 59024P370121 19377-8 59044P080056 59044P290122 59026P23A062 59026P23A072 59026P230060 59044P08G019 59024P360023 59024P230036 59144P290069 20007726 20007725+20 1700001 1700002 20035367+20 20039454+20 20039455+20 1112941 1505006 7817170M291296026 M2912960257806002 30160214-1 30154120 3018212171613-1 30151206 30151204-1 30153304 30180819 30160574-1 980547161398005-13 109858-1EN 92537-E-216 94817-4AN 30184446-C3E 16401-6130358-RV1 94537-230N 30181781-3EN 30154047-A4N 94521-PMN 94522-1SN 94537-130NP854000031-19XN 112802-10 94537-130N 93548-1S30NP854000031-19XN 53201+5053202780513798400 30176284 121685-M20M20 30183573-004-C 30183573-005-C 30183573-006-C 30183573-006-SP 30183573-008-C 30183573-009-C 30183573-010-C 30183573-012-C30183573-M04-C 30183573-M05-C 30183573-M06-C 30183573-M10-C 30183573-M10-SP 30183573-M12-C 30183573-M18-C 30183573-M20-C 30183573-M24-C 30183573-M35-C 53008-04-04-S 53008-04-06-C 53008-06-08-S 782848806 56519-10-12S 56519-12-12S 56519-12-16S 56519-12-6-S 56519-12-8-S 56519-16-12S 56519-20-20S 56519-4-6-S 56519-6-6-S 56519-6-8-S 56519-8-6-S 56519-8-8-S 56521-8-6-S 56522-12-12S 56522-6-6-S 56524-2-4-S 56525-12-12S 56525-6-6-S 56525-8-8-S 56529-10-6-S 56529-10-8-S 56529-12-12S 56529-12-6-S 56529-16-16S 56529-4-4-S 56529-4-6-S 56529-6-4-S 56529-6-6-S 56529-8-4-S 56529-8-6-S56529-8-8-S 56530-6-6-S 56535-61-08 56535-61-16 56535-61-20 56541-1656541-2056541-3256541-4056541-856546-12-12S 56546-20-20S 56546-6-6-S 56546-8-8-S 56549-4-4-S 56552-4-S56555-6-S56556-8-6-S 56557-12-12S 56557-6-6-S 56561-6-6-S 56571-4-12 87196-10-S 87196-12-S 87196-16-S 87196-24-S 87196-2-S87196-4-S87196-5-S87196-6-S87196-8-S93019-1393667-M11M364000617P364000009-06-06 P364000009-08-08 P364000009-12-12 P364000031-06-06 P764000008-06-06 P764000010-06-06 P764000010-16-16 M854000300M854000300-001 M854000300-003112802-10109858-4AN109858-1BNM854000306-20-20 M854000306-16-16 M854000306-10-08 P854000108-06M08 56522-8-8-SM364000484 30176410-2YNP854000031-13PNP854000067-1AN3000 94536-130N110844-3894042-15P364000009-12-12 P854000074-12-12 94537-230N81788+30 30154047-F4N010P854000074-16-16 P854000074-08-08-S 30184105-3ENP854000097-3DNP854000084-3FN 94538-PXNO-5 94522-1DN93548-2S30N93547-3B30N 59000319-2A806 30154047-F4N010 94521-1BN 30176410-3YN 56530-12-8-S 56546-12-12S 56546-4-4-S97631-1EN93018-12131733-2N98006-22N131733-E294521-1BN56529-10-6-SM854000305-06F08M854000305-06M08 M854000305-08F08 M854000306-08-08 M854000306-10-08 93548-2S30N 117851-1KHN94521-PNN94041-10P854000070-105P854000067-1AN1000 30184401-P4NM854000305-04M06 M854000306-06-06 3018325451300-210-B51300-214-B53201+5056530-6-6-S56556-8-6-S56557-4-4-S56557-6-4-S56557-8-8-S87196-2-S87196-4-S87196-6-S87196-8-S87196-10-S87196-12-S87196-16-S87196-20-S87196-24-S93024-4SAE93024-6SAE263353250-253500-1187566394518-19JN97072-4119002-03119002-04119002-04-OH 119002-06-OH 131733-2N。
Varco TDS—11SA顶驱使用操作规程-新
Varco TDS-11SA顶驱使用操作规程一、安装（一）准备工作1、通常应原60ft长的水龙带变为75ft，并延长立管高度到70ft。
2、虽然有多种方案的钻台平面设计，但应将扭矩平衡梁装在靠近绞车的井架面上，或在V型大门的反向。
3、安装前，须确认：井架已竖好，游车已安装在转盘的中心上方。
井架修改工作已完成扭矩平衡梁及其支架已安装好并符合VARCO FIP00003的要求。
电路支架已安装在井架上。
已安装控制板和变频装置。
检查大钳管线等有无可能缠绕在TDS-11SA上。
大钩或适配器环索是否已安装，大钩应当朝向绞车方向打开。
（二）安装导轨和顶驱。
1、将连接环安装到天车上。
2、将第一节导轨吊上钻台，将导轨架与第一节导轨连接，钢绳挂在大钩侧面吊耳上。
3、上提游车用导轨架提起第一节导轨。
4、将第二节导轨吊至钻台面，对正第一节导轨的下接头和第二节导轨的上接头，连接钩板与固定销并吊起，提升至两节导轨均位于竖直位置，缓慢下放游车，使上下接头组件的销孔自动对正，将导轨销插入销孔固定两节导轨，然后插入锁销固定导轨销。
5、按上面步骤依次将第三、四、五、六节导轨安装好。
6、上提游车，至第一节导轨和调节板相接，按照井架高度确定导轨挂在调节板哪个孔上。
装上螺栓、螺母和别针。
7、拆掉导轨安装架，下放游车至钻台面，将导轨安装架吊离钻台。
8、吊装顶驱至钻台面方案一：（1）将钢绳挂于运移架两侧的吊装管上。
（2）用40吨吊车直接将顶驱本体提至钻台面。
方案二：（1）将顶驱置于井架大门的滑道上，方向朝向井口。
（2）下放游车，将钢绳挂于运移架上部的吊装位置。
（3）将钢绳固定在提环大钩销或是两侧耳上，用吊车吊住运移架下部起辅助作用。
（4）将运移架沿滑道送至钻台面并立起托架，对正游车下方。
9、将大钩挂在顶驱本体的提环上。
10、拆掉运移架上对顶驱的支撑。
11、去掉顶驱导轨与运移架的连接销，将本体从运移架中吊起，与运移架分离。
12、将运移架移下钻台。
VARCO TDS-11SA顶驱培训
• ② 背钳总成 • 悬挂在旋转吊环配接器上的扭矩作用架支撑着扭 矩背钳。它在保护短节的下轴节的底部，由一对 钻杆引鞋和夹紧液缸组成，在钻柱与保护短节连 接时用于夹紧钻柱接头。背钳本体安装在扭矩作 用架上，在钻杆上卸扣时可以上下移动并平衡上 卸扣时产生的扭矩。
• ③ 双向吊环倾斜装置 • 双向吊环倾斜装置由通过销子连接与旋转吊环配 接器上的液缸活塞杆和通过一套耳板用销子连接 的液缸缸体组成。操作司钻台上的开关给液缸加 压，伸长活塞杆使吊卡到鼠洞和放下位置。浮动 使吊卡回到井口中心位置。液缸装置上的锁销限 制吊卡移动到井架工位置，拖动拦绳松开门锁吊 卡可以移动到鼠洞位置。 • 止动动装置限制了吊卡只能移动到井架工的位置， 而此位置是可调节的。操纵止动装置可以将吊卡 移动到小鼠洞的位置。司钻控制台上有一个3挡 开关操纵吊环倾斜装置。通过两个液缸的换向， 吊卡可以朝相反的方向充分延伸，这样就具有钻 进到钻台面的能力。
• ② 控制房 • 在TDS-11SA控制房中包括TDS-11SA控制系统（简写VCP）和 变频器（VFI）两部分，控制房内的基本操作步骤： • 1）进入变频房后，先打开空调，温度调节在华氏55~60度之间。 • 2）先按VCP右下角的整个控制柜的电源开关，然后依次按下 VCP中部靠左手边的主PLC和伺服PLC以及电瓶等的电源开关。 • 3）合上主变频器（VFI）的空气开关。 • 4）把主变频器（VFI）的编码器的参数设定好后，按编码控制面 板上的开始按钮，主变频器（VFI）开始工作。 • 5）设定好辅助变频器的参数后，按编码控制面板上的开始按钮， 辅助变频器开始工作。 • 6）其关闭过程与开启过程正好相反 • 注意：当编码器中的各种参数设定好后，请不要随意调整，如果 出现故障，请把编码器的控制开关打到“BY PASS”位置
机械师题库(初级)
机械师题库（初级）单项选择题1. 离心泵一般不宜采用关小吸入阀开度来进行工况调节的主要原因是（）。
（）[单选题] *A.引起振动B.引起排量降低C.产生汽蚀现象(正确答案)D.增加电机的负荷2. 会引起离心泵电机过载的最常见原因是（）。
（） [单选题] *A.排出阀未开B.吸入阀未开C.轴承松动(正确答案)D.所需流量过大3. 在日常管理工作中，为防止离心泵汽蚀现象的发生，主要采取的措施是（）。
（） [单选题] *A.合理确定泵的吸入高度B.清洗滤器，减小吸入管中的阻力(正确答案)C.采用旁通法调节泵的排量，减少压差D.采用封闭启动4. 离心泵停泵的合理步骤是（）。
（） [单选题] *A.停止原动机→关闭排出阀→关闭吸入阀B.关闭吸入阀→停止原动机→关闭排出阀C.关闭排出阀→停止原动机→关闭吸入阀(正确答案)D.停止原动机→关闭吸入阀→关闭排出阀5. 泵的定义是（）。
（） [单选题] *A.原动机与液体之间进行能量交换的机械B.用来输送水的机械C.将液体从低处送往高处的机械D.向液体传递机械能的机械(正确答案)6. 为了减少汽蚀现象，应提高往复泵的（）。
（） [单选题] *A.泵内真空度B.排出压力C.吸入压力(正确答案)D.转速7. 齿轮泵起动后不能排油或流量不足，属于不能建立足够低的吸入压力的原因是：（）。
（） [单选题] *A.吸入管漏气(正确答案)B.吸入管路堵塞C.油温太低D.吸入阀未开8. 14-P-220曲轴箱润滑方式为：（）。
（） [单选题] *A.飞溅润滑B.强制润滑(正确答案)C.油浴润滑9. 在很长的管中流动的液体，其压力值是（）。
（A）A.前大后小 [单选题] *B.各处相等(正确答案)C.前小后大D.不能确定10. 14-P-220曲轴箱润滑油压力通常为：（）。
（） [单选题] *A.10-15psiB. 10-50psiC. 15-50psi(正确答案)D.15-75psi11. 平台高压泥浆管管汇上使用的阀门一般是：（）。
NOV华高VARCO顶驱TDS-11SA配件(原装)
小郑：手-机 152-608-22-709；电-话05-95-28 76-7892; Q 238-327-4228.NOV Varco华高顶驱产品配件 TDS-11SA 世界顶级品牌厂家直接供货NOV Varco华高 TDS-11SA顶驱专业进口品质保证泉州双环机械设备贸易有限公司专业从事油田设备，港口设备，工矿设备等机械及配件的进口.美国NOV国民油井旗下的Varco顶驱设备及配件,以及各类型全系列专用配件也是我司的主营系列产品,常年为石油、石化、钻探勘查、等各大企业提供原装纯正的进口配件.National Oilwell Varco (NOV, 中文译名：国民油井华高) 一贯致力于保证顾客得到最高质量的油田产品与服务。
凭借超过 700 个遍布全球的制造、销售及服务中心，National Oilwell Varco 以顾客为重点，提供能满足能源工业界对质量、产能和环境要求的最佳解决方案。
National Oilwell Varco 是世界上最大的钻井设备制造商，产品包括陆地和海上钻机的大型机械部件、成套陆地钻机和修井机、管材检测和管内涂层、钻柱设备、多种起升设备以及各种井下马达、钻头和工具。
National Oilwell Varco 还通过设在世界各主要油气产地的分销服务中心网络，提供供应链服务。
NOV 提供全套的修井及完井服务设备，包括车载修井机、连续油管设备、液氮设备、固井设备、压裂设备和电缆设备以及井下工具和井口压力控制设备。
此外，NOV 提供全系列技术先进的仪表和控制装置，大幅提高了作业安全性，并为用户带来了巨大经济效益。
NOV 产品包括以下品牌：Rolligon、Texas Oil Tools、HydraRig、CTES、Fidmash和Elmar，提供各种品牌装置设备，这些专业设备可以满足从海上平台到沙漠及极地作业的要求.华高VARCO顶驱配件顶部驱动钻井装置有以下主要部件和附件构成：l.水龙头-钻井马达总成（关键部件之一）；2.马达支架/导向滑车总成（关键部件之一）；3.钻杆上卸扣装置总成（关键部件之一，它是体现顶部驱动钻井装置最大优点的设备）；4.平衡系统；5.冷却系统；6.顶部驱动钻井装置控制系统；7.可选用的附属设备。
NOV STAR
• Disposal or Injection Tubing• Production Tubing - ESP, Gas Lift or Rod PumpApplications• Casing Liners• Chemical Waste Disposal • Geothermal• Slotted Production Liners and Prepacked Screens• Observation Well CasingProduct Description• Pressure - Up to 4000 psi (27,6 MPa)• Resin System - Aliphatic Amine Cured Epoxy • Reinforcement - Premium Fiberglass • Joining Systems - API 5B 8rd, Threaded and Coupled or Integral Joint• Joint Length - 30 Feet (9,1 mts) Nominal 28 to 32 feet (8,5 to 9,8 meters)• Temperature - Up to 200° F (93.3° C) Maximum • Sizes - 1.9 through 9 5/8 inches• Fittings - A variety of filament wound API 5B threaded Nipples and CouplingsBenefits• Corrosion Control • Improved Flow Efficiency • Easily Drilled Up• Excellent Logging CharacteristicsPhysical Properties• Density = 122 lbs/cu ft (1.96 kgs/lt)• Specific Gravity = 1.96Thermal Properties• Coefficient of Thermal Conductivity 0.23 BTU/(ft•hr•ºF) (0.4 W/(m•°C))• Coefficient of Thermal Expansion 8.7 x 10-6 in/in/°F (15,7 x 10-6 mm/mm/°C)API 5B THREADS (EUE 10rd, EUE 8rd, OD 8rd)• Advanced Composite Thread• Precision molded with Epoxy, Graphite and Ceramic • Tighter tolerances than steel • Improved make and break proper ties• Minimizes thread and wrench damage • Chemically resistant threads • Compatible with steel API 5B ThreadsTubing Design• Non API Design• Design Temperature - 200° F (93.3° C)• Design - Based on the Proportional Elastic Limit in both the Hoop and Axial direction • 100% Factory Hydrotest - All sizes to 1.25 x Pressure Rating• Tensile Test - The hydrotest is across the joint and unrestrained; therefore, tensile loads of a proportional amount are generated.Flow Factors• Hazen-Williams C=150• Absolute Roughness = 0.00021 in. (0.00533 mm)Nominal Moduli• Modulus of Elasticity Hoop - 5.0 x 106 psi (34.5 GPa)Axial - 3.0 x 106 psi (20.7 GPa)Joining SystemThreaded and Coupled (T&C)Integral Joint (IJ)SizeNominal Pipe DimensionsIJ (2)T&C (2)TensileCollapseInside DiameterDrift DiameterOutside DiameterTubing Weight (1)Connection DiameterConnection DiameterRating (3)Rating (3)Threadin(mm)in(mm)in(mm)Lbs/ft(kg/m)in(mm)in(mm)LlbskgsPSIMPaSeries 1000 (6,9 MPa) - ACTSeries 2000 (13,8 MPa) - ACTSeries 1750 (12,1 MPa) - ACTSeries 1500 (10,3 MPa) - ACTSizeNominal Pipe DimensionsIJ (2)T&C (2)TensileCollapseInside DiameterDrift DiameterOutside DiameterTubing Weight (1)Connection DiameterConnection DiameterRating (3)Rating (3)Threadin(mm)in(mm)in(mm)Lbs/ft(kg/m)in(mm)in(mm)Llbs(kgs)PSI(MPa)Series 2500 (17,2 MPa) - ACTSeries 3000 (20,7 MPa) - ACTSeries 3500 (24,1 MPa) - ACTPipe CapacitySizeInside DiameterCapacityThread in (mm)Bbls/1,000 ft.(m3/km)95/87.74(196,6)58.10(30,3)Joining System Information* 41/2” thread (3” pipe), 3500 psi, the stretch factor is 0.85; 41/2” thread (31/2” pipe), 3500 psi, the stretch factor is 0.70. ** 65/8” thread (5.50 ID), 1000 psi, the stretch factor is .085; 65/8” thread (5.93 ID) 1000 psi, the stretch factor is 0.64.Packer Selection(More information listed in “Downhole Tubing and Casing Installation and Application Practices” Manual)• STAR tubing is designed to be set in tension (see stretch chart).• Double Grip Packers are preferred with an on/off tool seal assembly, ¼ turn release.• Direct Tension Set Packers should be avoided due to the movement of fiberglass.• Direct Set Packers are set <3500 feet deep (1,067 m).• When packer setting is >3500 feet (1,067 m) deep, use steel work string to set packer.• Hydraulic Set Packers are not recommended due to uncontrollable forces.• Polished Bore Receptacles are set with proper precautions to avoid compression. A complete STAR Well Evaluation must be performed to determine the proper set-ups.Perforation• Use a Jet Perforating Gun. Shoot a maximum of two shots at a time at 0° Phase or 180° Phase.• Thread lock all steel to FRP connections.• When installing mixed strings, have one joint of FRP casing supplied without a coupling (pin x pin) for cross-overs.Cementing• Cementing in two stages may help avoid exceeding collapse rating.• Keep differential below external and internal ratings at all times.• Care must be given to avoid shock collapse pressure when setting cement plug.• Fiberglass centralizers are available, metal centralizers must be qualified to fit to FRP.• Cement residue can be cleaned up with proper care using a rock bit.• Landing joints are available, but must be sized for the well-head selected.• Drilling-Up fiberglass tubing or casing is easy with a rock bit (not a mill).Rod Pump Wells• It is preferred that the tubing be anchored.• Rod Guides must be used.Electric Submersible Pumps• Care must be given to direction and amount of start-up torque.Fishing• Normal Procedures, Spear or Overshot.Cutting• Mechanical Jet Cutter.Corresponding Numbered Notes:1. Tubing Weight is based on Threaded and Coupled (T&C) Joining System.2. Threads - All 11/2” EUE 10rd and 23/8”- 41/2” EUE 8rd API threads conform to API 5B Table 14, 14th Edition (L4 is minimum) and all 51/2”- 95/8” O.D. 8rd casing threads conform to API 5B, Table 7, 14th Edition (L4 is minimum).3. Ratings - All ratings are maximum operating limits. Exceeding these limits will void the warranty on all NOV Fiber Glass Systems pipe.4. Tensile Ultimates - The typical mode of failure for pressure is weep and for tensile it is an across the joint pipe body shear.5. Elevators T&C - The 1000 & 1500 psi products have smaller OD’s which may work with the same size elevators as the thread size.6. Elevators IJ - The setting plate must be removed so that the slips will properly set on the fiberglass pipe. Sizing slip type elevators requires use of the tubing O.D. instead of the upset O.D. on the male end. Rubber setting plates are available to minimize marking and to improve the fit. Shorter bolts are required to hold in place.7. Floor Slips - When running lighter weight (1000-1500 psi) products, it is good practice to replace the slip dies to make sure they will latch on the pipe body.。
ICP DAS ZT-2005-C8用户手册说明书
ZT-2005-C8User Manual WarrantyAll products manufactured by ICP DAS are under warranty regardingdefective materials for a period of one year, beginning from the date ofdelivery to the original purchaser.WarningICP DAS assumes no liability for any damage resulting from the use of thisproduct. ICP DAS reserves the right to change this manual at any timewithout notice. The information furnished by ICP DAS is believed to beaccurate and reliable. However, no responsibility is assumed by ICP DASfor its use, nor for any infringements of patents or other rights of thirdparties resulting from its use.CopyrightCopyright © 2013 by ICP DAS. All rights are reserved. TrademarksNames are used for identification purposes only and may be registeredtrademarks of their respective companies.Technical SupportTable of Contents1Inftroduction (5)1.1Introduction to ZigBee (5)1.2Introduction to the ZT-2005-C8 (6)2Hardware Information (7)2.1Specifications (7)Specifcaions of ZigBee (7)Specifcaions of ZT-2005-C8 module (7)2.2Pin assignments (9)ZT-2005-C8 (9)3Setting up the ZT-2005-C8 (10)3.1Introction to the Configuration Parameters (10)3.2Introduction to the Rotary and DIP Switches (11)3.3Starting the ZT-2005-C8 (13)3.4Examples (14)3.5Communications Testing (15)4 Format, Type and Calibration (16)4.1Over/Under Range Readings (16)4.2Configuration Tables (16)4.3Type code and Data Format Table (17)4.4Calibration (17)5 The DCON/Modbus RTU Command Sets (18)5.1Communication with the ZT-2005-C8 module (18)5.2The DCON Protocol Command Set (18)5.2.1Checksum (19)5.2.2Overview of the DCON Command Set (20)5.2.3%AANNTTCCFF (21)5.2.4#AA (22)5.2.5#AAN (23)5.2.6$AA0Ci (24)5.2.7$AA1Ci (25)5.2.8$AA0 (26)5.2.9$AA1 (27)5.2.10$AA2 (28)5.2.11$AA5VV (29)5.2.12$AA6 (30)5.2.13$AAF (31)5.2.14$AAM (32)5.2.15$AAP (33)5.2.16$AAS1 (34)5.2.17~AAD (35)5.2.18~AADT (36)5.2.19~AAEV (37)5.2.20~AARE (38)5.2.21@AAA2CiToo (39)5.2.22@AAA3Ci (40)5.3Modbus RTU Protocol (41)5.3.1Modbus Address Mapping (42)5.3.2Function 01(0x01)-Read Coils (43)5.3.3Function 02(0x02)-Read Discrete Inputs (44)5.3.4Function 03(0x03)–Read Multiple Registers (45)5.3.5Function 04(0x04)–Read Multiple Input Registers (46)5.3.6Fuction 05(0x05)–Write Single Coil (47)5.3.7Function 06(0x06)–Write Single Register (48)5.3.8Function 15(0x0F)–Write Multiple Coils (49)5.3.9Function 16(0x10)–Write Multiple Registers (50)5.3.10Function 70(0x46)–Read/Write Module Setting (51)5.3.10.1Sub-function 00(0x00)-Read Module Name (52)5.3.10.2Sub-function 04(0x04)-Write Module Address (53)5.3.10.3Sub-function 05(0x05)-Read the communication setting (54)5.3.10.4Sub-function 32(0x20)-Read Module Firmware Version (55)5.3.10.5Sub-function 37(0x25)-Read The Enabled/Disable status of Channels (56)5.3.10.6Sub-function 38(0x26)-Write The Enabled/Disable status of Channels (57)6Troubleshooting (58)7 Appendix (59)7.1LED Display Status (59)7.2The Extension to the Software Address (59)What ’s in the Shipping Package? The shipping package contains the following items:More Information⏹ Documentation ：CD: \Napdos\ZigBee\ZT_Series\Document /pub/cd/usbcd/napdos/zigbee/zt_series/document ⏹ Software ：CD: \Napdos\ZigBee\ZT_Series\Utility /pub/cd/usbcd/napdos/zigbee/zt_series/utilityAntenna (ANT-124-05) Quick StartZT-2005-C8module Thermistor (CA-021) CD1Inftroduction1.1Introduction to ZigBeeZigBee is a specification for a suite of high-level communication protocols using small, low-power digital radios based on the IEEE 802.15.4 standard for personal area networks. ZigBee devices are often used in mesh network form to transmit data over longer distances, passing data through intermediate devices to reach more distant ones. This allows ZigBee networks to be formed ad-hoc, with no centralized control or high-power transmitter/receiver able to reach all of the devices. Any ZigBee device can be tasked with running the network.ZigBee is targeted at applications that require a low data rate, long battery life, and secure networking. ZigBee has a defined rate of 250 kbit/s, best suited for periodic or intermittent data or a single signal transmission from a sensor or input device. Applications include wireless light switches, electrical meters within-home-displays, traffic management systems, and other consumer and industrial equipment that requires short-range wireless transfer of data at relatively low rates. The technology defined by the ZigBee specification is intended to be simpler and less expensive than other WPANs.1.2Introduction to the ZT-2005-C8The ZT-2005-C8 is an 8 channel thermistor input module, it can monitor the resistance change of thermistor to get temperatue.The ZT-2005-C8 is a wireless ZigBee module, it need to communicate with ZigBee coordinator. The information of ZigBee coordinator can refer ZT-2550 or ZT-2570. Otherwise, users can use rotary switch and DIP switch to set address (or ZigBee Node ID, NID) of module, protocol, DCON checksum, ZigBee RF Power, ZigBee Pan ID (PID), and ZigBee channel.2Hardware Information 2.1Specifications2.2Pin assignments ZT-2005-C83Setting up the ZT-2005-C83.1 Introction to the Configuration Parameters1. Pan ID ：“Pan ID” parameter is the group identity for a ZigBee network, and mustthe same for all devices in the same ZigBee network. (The range are 0 to 1, 0x0000~0x0001)2. Address/Node ID ：“Address /Node ID” parameter is the individed identity of aspecific the ZigBee module, and must be unique for each device connected the same ZigBee network. (The range are 1 to 247，0x0001~0x00F7)3. RF Channel ： “RF Channel” parameter indicates the radio frequency channel,RF channels 0x04, 0x09, 0x0E or 0x0F are recommended because they do not overlap with the Wi-Fi frequency band.4. Protocol/Application Mode ：When implementing custom programs based on3.2Introduction to the Rotary and DIP SwitchesThe configuration of the ZT-2005-C8 can be adjusted using a combination of the external rotary switch and the DIP switches. The ZT-2005-C8 device should only be rebooted once the configuration is complete.DIP and rotary switch of ZT-2005-C8Address LSB(Node ID) (Node ID)Rotary SwitchAddress SW※Once the address of hardware switch is set to 0x00, it mens the address is usingsoftware configurations. Refer Sec. 7.2 for more detailed information.3.3Starting the ZT-2005-C8As the ZigBee network is controlled by the ZigBee Coordinator, theZT-2550/ZT-2570 (ZigBee Coordinator) must be configured first. Refer to the documents section below for full details of how to configure these devices.Once configuration of the ZigBee Coordinator has been completed, set the “ZB PID” and “ZB Channel” values for the ZT-2000 I/O device to the same values as the network, and then reboot the device. The module will automatically start to function on the ZigBee network using the default protocol.※ Documents：/pub/cd/usbcd/napdos/zigbee/zt_series/document/zt-255x/ /pub/cd/usbcd/napdos/zigbee/zt_series/document/zt-257x/※ Configuration Utility (Used to configure ZigBee Coordinator)：/pub/cd/usbcd/napdos/zigbee/zt_series/utility/3.4 ExamplesConfigurations of ZT-2550/ZT-2570Configuration of ZT-2005-C8DIP SwitchTransparent mode3.5Communications TestingOnce the ZT-2005-C8 module has joined the ZigBee network, the signal quality can be comfirmed by monitoring the status of the ZigBee Net LED indicators. If the LED indicator shows a steady light, communication with the ZT-2005-C8 module has been successfully established for data acquisition and control.ICP DAS also provides the “DCON Utility”, which can be used to simulate DCON/Modbus communication. This software can also be used to verify the device settings and ZT-2005-C8 functions.The DCON Utility Pro can be download from:/pub/cd/8000cd/napdos/driver/dcon_utility/Simulating I/O channel via the DCON Utility Prounch the DCON Utility and select the appropriate COM Port settings to connectto the ZigBee Coordinator (ZT-2550/ZT-2570).2.Click the “Search” button to start searching for ZT-2005-C8 modules connectedto the same ZigBee network.3.If any ZT-2005-C8 modules are found, they will be displayed in the device listwindow. Double-click the list of the module name to start the platform to operate the I/O channels.4Format, Type and Calibration 4.14.2Configuration Tables4.4CalibrationWarning: Performing calibration is not recommended until the process is fully understood.The calibration proceduce is as follows:1.Warm up the module for at last 30 minutes.2.Enable calibration. (Refer to Section 5.2.22.)3.Connect the zero calibration resistor.4.Send the zero calibration command. (Refer to Section5.2.6)5.Connect the span calibration resistor.6.Send the span calibration command. (Refer to Section 5.2.7)7.Repeat steps 2 to 6 three times.5 The DCON/Modbus RTU Command Sets 5.1Communication with the ZT-2005-C8 moduleZT-2005-C8 module can be operated using either the DCON or the Modbus RTU protocol, which can be selected by adjusting the position of DIP Switch 2 to OFF (DCON) or ON (Modbus RTU) and then rebooting the ZT-2005-C8 to use the new protocol.5.2The DCON Protocol Command SetThe ZT-2005-C8 are controlled via wireless broadcast commands, so each device must have a unique address (or Node ID) that is saved in the EEPROM of the device.Consequently, all command and response formats contain the address of the destination module. When an I/O device receives a command, it will determine whether or not to respond based on the address contained in the command.※Note: ‘CR’ (0x0D) is the end of command (carriage return) character used to end a frame, and all characters should be expressed in capital letters.5.2.1ChecksumCalculation the Checksum:Sum the ASCII codes of all the characters contained in the command in addition to the ‘CR’ terminator. The Checksum is the sum value expressed inHexadecimal format.Example: Command ”$012(CR)”Sum = ‘$’ + ‘0’ + ‘1’ + ‘2’ = 24h + 30h + 31h + 32h = B7hChecksum = “B7”DCON Command with Checksum =“$012B7(CR)”Example: Response ”!01200600(CR)”Sum = ‘!’ + ‘0’ + ‘1’ + ‘2’ + ‘0’ + ‘0’ + ‘6’ + ‘0’ + ‘0’= 21h+30h+31h+32h+30h+30h+36h+30h+30h= 1AAhChecksum = “AA”DCON Response with Checksum = “!01200600AA(CR)”※Note: The Checksum is the sum value expressed in capital letters.5.2.2Overview of the DCON Command SetGeneral Command SetCommand Response Description Section %AANNTTCCFF !AA Sets the Configuration of the Module 5.2.35.2.4 #AA >(Data) Reads the Analog Input Data from allChannels5.2.5 #AAN >(Data) Reads the Analog Input Data from aSpecific Channel5.2.6 $AA0Ci !AA Performs an Analog Input Zero Calibrationof a Specific Channel on the Module5.2.7 $AA1Ci !AA Performs an Analog Input Span Calibrationof a Specific Channel on the Module5.2.8 $AA0 !AA Performs an Analog Input Span Calibrationon the Module5.2.9 $AA1 !AA Performs an Analog Input Zero Calibrationon the Module$AA2 !AATTCCFF Reads the Configuration of the Module 5.2.105.2.11 $AA5VV !AA Enables or Disables Specific Analog InputChannels5.2.12 $AA6 !AAVV Reads whether each Analog Input Channelis Enabled or Disabled$AAF !AA(Data) Reads the Firmware Version of the Module 5.2.13 $AAM !AA(Data) Reads the Name of the Module 5.2.14 $AAP !AASC Reads the communication protocol 5.2.15 $AAS1 !AA Reloads the Default Calibration Parameters 5.2.16 ~AAD !AAT Reads the temperature scaling 5.2.175.2.18 ~AADT !AA Sets the temperature scaling to either °Cor °F~AAEV !AA Enables/Disables calibration 5.2.19 ~AARE !AAsc Read RF Encryption Setting 5.2.205.2.21 @AAA2CiToo !AA Sets the temperature offset of achannel5.2.22 @AAA3Ci !AA Reads the temperature offset ofa channel※Effect after reboot, and Related Commands: $AA2※Related Commands: $AA1Ci、~AAEV※Related Commands: $AA0Ci、~AAEV※Related Commands: $AA1、~AAEV※Related Commands: $AA0、~AAEV※Related Commands: %AANNTTCCFF※Related Commands: $AA6※Related Commands: $AA5VVenable or disable encryption AES 128 encryption automatically, so users don’t need to set again.※Related Commands:@AAA3Ci5.3Modbus RTU ProtocolThe Modbus protocol was originally developed for Modicon controllers by Modicon Inc. Detailed information related to the Modbus RTU protocol can be found at for more valuable information.The Modbus RTU functions of ZT-2005-C8 module are supported as bellow.If the function specified in the message is not supported, then the module responds as below. Note that the address mapping for the Modbus protocol isBase 0.5.3.1Modbus Address Mapping5.3.5Function 04(0x04)–Read Multiple Input。