卓同HDBaseT传输器

合集下载

HDbaseT技术解析

了更多特性的优势，未来是否能替代ＨＤＭＩ？呢
“ 目前并不是想替代ＨＤＭＩ而是将ＨＤｂｓＴ，ａｅ作为ＨＤＭＩ一个有益的补充，” Ｍａｖｎ示，的ｒｉ表 “ 多ＨＤＭＩ不到的地方都可以由ＨＤｂｓＴ许做ａｅ
口有许多优势，新的１４本还加上了以太网、．版３Ｄ等特性支持，但使用ＨＤＭＩ也有许多不方时便的地方，比！ＨＤＭＩ须使用专用、昂贵的线￣Ｉ］必如表１示：所由表１以看出，ＨＤｂｓＴ比ＨＤＭＩ供可ａｅ￣提
替代，基于ＨＤａｅ的Ｍｅｉｕ方案，直接输ｂｓＴｄａＨｂ
入ＨＤＩ号，既可转换为ＨＤｂｓＴ出，从而Ｍ信ａｅ输
实现很长的传输距离。 ” 在年初的ＣＥＳ上，展
ｌｎ展０Ｔ来的３Ｄ和２ ×４ＫＫ视频格式，传输采用普通的Ｖａｅｓ示了收款发送芯片ＶＳｌ０Ｘ和接收芯１ＯＸ，而ＨＤｂｓＴ术也得到多家消费ａｅ技ＣＴｅ６络线缆，连接器也采用普通的Ｒ பைடு நூலகம் 接片ＶＳＯＲＡ５／网Ｊ５
Ｃ硎
Ｉ技术前沿ＩｒｎｉｒｅｈｏｏｙｏｔｃｎｌｇＦｅＴ
ＨｂｓＴ术解析Ｄａｅ技
－电子元件技术网ｌ一丁ｌ马
Ｂ、ＯＷＰＣ在如今的ＬＶ、高清ＳＣＤＴＴＢ、蓝光ＤＶＤＵＳ太网功能、１Ｏ的供电能力（ｏ）和其中，ＨＤＭＩ经成为 “ 实性 ” 的高清视频传输他控制信号通道。ＭａｖｎＨｂｓＴ已事ｒｉ把Ｄａｅ与ＨＤＩ．Ｍ４１ｉＡ做了一番比较，接口标准。尽管ＨＤＭＩ比以前的模拟或数字接和中国最新高清接口标准ＤｉＶ相

HDbaseT技术解析

HDbaseT技术解析在如今的LCD TV、高清STB、蓝光DVD中，HDMI已经成为“事实性”的高清视频传输接口标准。

尽管HDMI相比以前的模拟或数字接口有许多优势，新的1.4版本还加上了以太网、3D等特性支持，但使用HDMI时也有许多不方便的地方，比如HDMI必须使用专用、昂贵的线缆，此外HDMI的传输距离很短，多个设备的布线也成问题。

以色列初创无晶圆半导体厂商Valens开发的HDbaseT技术将解决HDMI面临的这些困难。

据Valens亚洲区销售总监Marvin介绍，HDbaseT支持最高20Gbps的传输速率，能更好的支持未来的3D和2K×4K视频格式，传输采用普通的CAT5e/6网络线缆，连接器也采用普通的RJ45接头，而传输距离达到了100米，此外，还提供以USB、太网功能、100W的供电能力（PoC）和其他控制信号通道。

Marvin把HDbaseT与HDMI 1.4和中国最新高清接口标准DiiVA做了一番比较，如表1所示：表1 HDbaseT、HDMI 1.4和DiiVA比较由表1可以看出，HDbaseT相比HDMI提供了更多特性的优势，未来是否能替代HDMI呢？“目前并不是想替代HDMI，而是将HDbaseT作为HDMI的一个有益的补充，”Marvin 表示，“许多HDMI做不到的地方都可以由HDbaseT替代，基于HDbaseT的Media Hub 方案，直接输入HDMI信号，既可转换为HDbaseT输出，从而实现很长的传输距离。

”在年初的CES展上，Valens展示了收款发送芯片VS100TX和接收芯片VS100RX，而HDbaseT技术也得到多家消费电子大厂的支持。

LG电子在CES上展示了基于HDbaseT 技术的媒体中心（Media Hub），船井（Funai）展示了基于HDbaseT的LCD TV，Gefen 发布了一款用于延长HDMI接口传输距离的转接盒解决方案，采用的正是Valens的HDbaseT技术。

HDBaseT延长器HB-30的使用说明

HDBaseT传输器HB-30使用说明V1.1目录一、产品说明 (2)1.1、产品概述 (2)1.2、接口介绍 (2)1.3、解析度与传输距离 (3)1.4、以太网信号 (3)1.5、串口信号 (3)1.6、双向红外信号 (3)二、使用说明 (5)2.1、连线示意图 (5)2.2、上电 (4)三、注意事项 (6)四、常见问题及其解答 (6)一、产品说明1.1、产品概述HDBaseT传输器HB-30是一款集成HDBaseT技术的传输器，其发送端和接收端配套使用。

它采用普通CAT.5e/CAT.6网线作为传输线缆，提高HDMI信号传输距离和图像质量，传输距离最远可达100米，在满足所有未压缩1080p传输的同时，也支持4K×2K超高清信号的传输。

HE-10通过一根线缆不仅可以传输HDMI 信号，还能同步传输100M以太网、RS232和双向IR信号,因此广泛于指挥中心、多媒体教学等领域。

如下图1所示：图1 应用示意图1.2、接口介绍HB-30发送端正视及背视图如下图2所示。

图2 发送端正视及背视图HB-30接收端正视及背视图如下图3所示。

图3 接收端正视及背视图1.3、解析度与传输距离HB-30不受信号设备、显示设备、以及CAT5e/6网线质量的影响，最远传输距离可达100米，最高传输速率为10.2Gbps。

支持解析度最高可达3840×2160@30Hz。

1.4、以太网信号HB-30支持100M以太网信号传输，最远传输距离可达100米。

1.5、串口信号HB-30支持RS232或RS485串口信号传输，最远传输距离可达100米，1.6、双向红外信号HB-30支持双向IR传输，其发送端和接收端均可接收红外信号，也均可输出红外信号到设备。

HB-30红外接收头和红外接收接口均可作为红外接收口，在红外接收接口接入红外接收器后其功能等效于红外接收头。

在红外发送接口接入红外发送器，在红外接收口给出红外信号，红外发送器即可将红外信号发送给设备。

PureLink PT-HDBT-702-RX HDBaseT接收器说明书

User ManualHDBaseT Receiver 4K (60Hz 4:2:0) with IR and RS232Model PT-HDBT-702-RXDesigned in Germany© 2017 PureLink GmbH All rights reserved.VersionV1.0PrefaceRead this user manual carefully before using this product. Pictures shown in this manual are for reference only. Different model layouts and specifications are subject to the physical product.This manual is for operation instructions only, not for any maintenance usage.In the constant effort to improve our product, we reserve the right to make changes in functions or parameters without prior notice or obligation. TrademarksProduct model and logo are trademarks. Any other trademarks mentioned in this manual are acknowledged as the properties of the trademark owner. No part of this publication may be copied or reproduced without the prior written consent. FCC StatementThis equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.Operation of this equipment in a residential area is likely to cause interference, in which case the user at their own expense will be required to take whatever measures may be necessary to correct the interference.Any changes or modifications not expressly approved by the manufacture would void the user’s authority to operate the equipment.REACH | 1907/2006/EUROHS | 2011/65/EUPureLink hereby declares that this product PureTools PT-HDBT-702-RX complies with Directives 1907/2006/EU und 2011/65/EU.EMC / LVD (Electro Magnetic Compatibility / Low Voltage Directive)PureLink GmbH hereby declares that this product PureTools PT-HDBT-702-RX complies with Directives 2014/30/EU and 2014/35/EU. The full text of the EU Declaration of Conformity is available at the following Internet address:http://www.purelink.de/ce/4251364706770_CE.pdfSAFETY PRECAUTIONSTo insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.●Unpack the equipment carefully and save the original box and packing materialfor possible future shipment●Follow basic safety precautions to reduce the risk of fire, electrical shock andinjury to persons.●Do not dismantle the housing or modify the module. It may result in electricalshock or burn.●Using supplies or parts not meeting the products’ specifications may causedamage, deterioration or malfunction.●Refer all servicing to qualified service personnel.●To prevent fire or shock hazard, do not expose the unit to rain, moisture or installthis product near water.●Do not put any heavy items on the extension cable in case of extrusion.●Do not remove the housing of the device as opening or removing housing mayexpose you to dangerous voltage or other hazards.●Install the device in a place with fine ventilation to avoid damage caused byoverheat.●Keep the module away from liquids.●Spillage into the housing may result in fire, electrical shock, or equipment damage.If an object or liquid falls or spills on to the housing, unplug the moduleimmediately.●Do not twist or pull by force ends of the optical cable. It can cause malfunction.●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the powerto the device before cleaning.●Unplug the power cord when left unused for a long period of time.●Information on disposal for scrapped devices: do not burn or mix with generalhousehold waste, please treat them as normal electrical wastes.Introduction to PT-HDBT-702-RXThe PT-HDBT-702-RX is a mini-size HDBaseT Receiver to receive HDMI signal from HDBaseT Transmitter or Matrix Switcher via CAT5e/CAT6a cable. HDBaseT technology is used to transmit high-resolution 1080p/ 4k signal from transmitter to thePT-HDBT-702-RX via a CAT5e/CAT6a cable at a distance of up to 70/40m. Moreover, it support CEC, bi-directional RS232&IR control, and bi-directional PoH function. Feature●Support Full HD: Delivers high resolution image (1080p@60Hz@48b/pixels/3D/4Kx2K).●Maximum transmission distance is 70m for 1080p and 40m for 4Kx2K oversingle CAT5e/CAT6a cable●High Bandwidth: 10.2Gps.●HDTV Compatible, use HDMI 1.4 and HDCP2.2 compliant.●Support CEC/IR/RS232 passthrough.●Support bi-directional PoH function.●Bi-directional RS232/IR control.●Use HDBaseT technology.●LED indicators show work status.Package Content● 1 x PT-HDBT-702-RX ● 4 x Plastic Cushions ● 1 x User Manual ● 2 x Mounting Ears with 4 Screws ● 1 x IR ReceiverPanel Description No. Name Description①LINK HDBT Link status indicator:▪OFF: No Link▪GREEN:Link Successful▪Blinking GREEN: Link abnormal②HDCP HDCP compliant indicator▪OFF: No HDMI traffic (no picture)▪GREEN: Traffic with HDCP.▪Blinking GREEN: Traffic without HDCP③Power OFF: No power; RED: DC power present.④RS232 RS232 connector.⑤IR IN Connect with 5V IR receiver (with carrier) to collect infrared signal, work with far-end IR OUT port⑥IR OUT Connect with 5V IR emitter to send infrared signal, work with far-end IR IN port⑦HDMI OUT Connect with HDMI display⑧HDBT IN Connect to the HDBT OUT socket on the transmitter via CAT5e/ CAT6a cable.⑨DC 24V Connect with power supply (Not necessary if transmitter connects with power adaptor).Note: Pictures shown in this manual are only for reference.123456789SpecificationInput & OutputInput IR, HDBT& RS232Input Connector 3.5mm mini jack, RJ-45, 3p captive screw connector Output HDMI, IR, RS232Output Connector HDMI female, 3.5mm mini jack, 3p captive screw connectorGeneralResolution Range 640x480@60Hz~4K×2K@30Hz Transmission Mode HDBaseTTransmission Distance 1080p ≤ 70m; 4Kx2K ≤ 40m Bandwidth 10.2GbpsHDMI Standard Support HDMI1.4 and HDCP2.2 Temperature 0~ 50℃Humidity 10% ~ 90%Power Supply Input: 100VAC~240VAC, 50/60Hz; Output: DC 24V, 1.25APower Consumption 14WDimension (W*H*D) 115mmx16.2mm x109mm Net Weight 196gSystem DiagramRXTX RX TX PT-HDBT-702-TX PT-HDBT-702-RX4K 40m 1080P 70mLaptop IR ReceiverProjector RemoteProjectorIR EmitterHDMI:RS232:IR:HDBaseT:After-Sales ServiceIf there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.1)Product Limited Warranty: This product will be free from defects in materials andworkmanship for two years (The purchase invoice shall prevail).Proof of purchase in the form of a bill of sale or receipted invoice which isevidence that the unit is within the Warranty period must be presented to obtain warranty service.2)What the warranty does not cover (servicing available for a fee):●Warranty expiration.●Factory applied serial number has been altered or removed from the product.●Damage, deterioration or malfunction caused by:●Normal wear and tear.●Use of supplies or parts not meeting our specifications.●No certificate or invoice as the proof of warranty.●The product model showed on the warranty card does not match with themodel of the product for repairing or had been altered.●Damage caused by force majeure.●Servicing not authorized by distributor.●Any other causes which does not relate to a product defect.●Delivery, installation or labor charges for installation or setup of the product.3)Technical Support: For any questions or problems, contact your distributor orreseller and tell them the respective product name and version, the detailedfailure situation as well as the formation of the cases.Asking for AssistanceTechnical Support:Phone: +49 5971 800299 - 0Fax: +49 5971 800299 – 99Technical Support Hours:8:30 AM to 5:00 PM Monday thru Thursday 8:30 AM to 4:00 PM FridayWrite to:PureLink GmbHVon-Liebig-Straße 10D - 48432 Rheinewww.purelink.de****************。

HDBaseT 70米传输器

产品图片：
（Tx）
பைடு நூலகம்
支持20-60kHz宽频红外遥控器，支持双向红外传输支持串口 RS-232 双向传输 DC12V/3A <8W 101(L)×79.5（W）×26（H）mm 金属 TX:250g RX:250g 钛晶灰邓小姐（壹捌零贰伍捌伍六零贰叁） *2pcs *1pcs
（Rx）
系统拓扑图：
HDBaseT 70 米传输器
产品功能应用： KS-HD70 是一款高性能的 HDBaseT 传输器，其主要功能是通过一条网线将 HDMI 数字信号转换成 HDBaseT 数字信号，无压缩、无延时的传输 70 米的距离，最高可以支持 4k*2k 的超高分辨率传输，同时支持 IR 红外遥控信号回传和 RS-232 串口信号的双向传输。KS-HD70 广泛应用于工程、商场、家庭影院等。技术参数：
项目 HDMI信号传输协议支持分辨率音频网线参数说明 HDMI1.4、兼容HDCP2.2、支持CEC、24位色深、4K×2K HDBaseT 480i/480P/576i/576P/720P/1080i/1080P/3D/4K×2K LPCM,DTS-HD,Dolby True HD CAT5E、CAT6、CAT6A、CAT7 60m CAT5e/CAT6 传输距离 70m CAT6a/CAT7 红外回传 RS-232 传输电源产品功耗产品尺寸机身材质净重颜色联系方式 40m 35m Up to 1080P60Hz 36bpp 1080p@60Hz 48bpp,1080p60Hz 3D, 4K×2K 30Hz Up to 1080P60Hz 36bpp 1080p@60Hz48bpp,1080p@60Hz3D, 4K×2K 30Hz

HDBaseT网线传输器HB-20的使用说明

说明：1.HDBaseT 传输器HB-20是一款集成HDBaseT 技术的传输器，发送端和接收端配套使用。

2.采用普通CAT.5e/ 6网线作为传输线缆，提高HDMI 信号传输距离和图像质量，传输距离最远可达100米，3.在满足所有未压缩1080p 及内嵌音频信号传输的同时，支持4K*2K 超高清信号的传输。

4.通过单根线缆不仅可传输HDMI 信号，还可同步传输RS232或RS485信号。

规格参数：注：1）确保网线接线顺序为B 类,即“橙白，橙，绿白，蓝，蓝白，绿，棕白，棕”；2）请在确认好设备正常连接无误后再启动信号源设备（如PC 电脑或融合器）；3）当传输距离较远时请注意确保接口处的接触良好。

传输距离：1.使用CAT.5e/ 6网线控制信号传输距离。

2.使用CAT.5e/ 6网线视频信号传输距离。

接线方法：使用时，通过CAT5e/6网线连接发送端HDBTX 口与接收端HDBRX 口，发送端各信号输入口分别接入所需的相应信号源，接收端各信号输出口分别接上所需的相应输出设备，如下图：HB-20发送端连线方法HB-20接收端连线方法网口指示灯状态：注意事项：1.本产品支持HDCP ；2.发送端、接收端不可混用，需按规则连接，否则会导致信号；3.各接口应使用相应的接口线连接；4.本产品支持热插拔，但为避免电器损坏，不建议经常性热插拔常见问题解答：Q ：输出物图像无声音。

A ：1. 检查网线是否为CAT5E/CAT6类网线； 2.检查水晶头是否做好； 3.检查HDMI 线是否接触良好； 4.检查信号源是否有正确输出； 5.更换信号源； 6.更换HDMI 传输线；7.检查整个连接系统是否都正常通电运行。

HDBaset传输器HB-10

HDBaset传输器HB-10
在多媒体应用系统中，使用普通的HDMI电缆传输，信号质量只能保持5米以内，进行长距离传输时经常会出现图像无法显示的情况。

然而，展览、娱乐、公共场合等区域的高清设备显示往往有很长的距离，普通的HDMI电缆传输难担此任；除了布线距离，电缆本身价格昂贵和难以现场连接也是问题。

所以集成商必须在工程安装开始前就准确测量好电缆长度，否则一个小错误就可能耽误大量时间。

HDBaseT传输器HB-10采用普通CAT5e/6网线作为传输线缆，集成商可在布线后进行现场连接，传输距离最远可达100米。

HB-10在满足所有未压缩1080p传输的同时，也支持4K×2K 超高清信号的传输。

除了具有高清信号长距传输的优势外，HB-10通过一根线缆可同时传输HDMI信号、100M以太网、RS232和双向IR信号，将传输和接口真正统一于一体。

HDBaseT传输器HB-10具备以下特征：
1.集成 HDBsaseT技术，兼容HDCP
2.最高传输速率10.2Gbps
3.支持HDMI、100M以太网、RS232和双向IR信号同时传输
4.支持HDMI 1.4a 4K×2K超高清分辨率
5.最远传输距离可达100米
6.使用常规CAT5e/6传输线材，RJ45接口。

HDBaseT高清信号延长技术及应用简介

HDBaseT高清信号延长技术及应用简介（北京科思图科技有限公司技术支持部）1．HDBaseT技术背景商用设备市场的连接标准与消费级家用设备市场的连接标准并不相同。

直到现在，商用设备安装仍然在使用那些传统以家庭为核心的技术和线缆，因为符合音频/视频(A/V)连接特性的线缆标准只有那么几个。

但是，这些为消费类电子(CE)市场特别定制的标准，却在线缆传输距离、特色功能、安装性和整体灵活性方面，给商用安装集成商带来了诸多限制。

无论是在机场安装视频墙、在教室安装投影机、还是在商场安装数字标牌，线缆长度仍然是集成商面临的最大A/V挑战。

一种被称之为HDBaseT的连接新技术开始成为设备安装方的首选，因为它能解决上述主要，乃至更多难题。

由来自日韩的家电大厂LG、Samsung、Sony等公司，以及以色列的半导体公司Valens Semiconductor，组成了HDBaseT 联盟，2009年通过Intel的HDCP认证，在2010年6月底，确定了HDBaseT 1.0的正式规范；在2013年底，确定了HDBaseT 2.0的正式规范。

最新的HDBaseT 2.0标准不仅能够实现视频信号传输，还加入了对5.1声道的支持，几乎可兼容所有视频和音频信号源。

同时，具备USB 2.0的功能并将支持移动存储设备。

因而，影音设备制造厂商可以去除多标准接口的设计，从而降低产品成本。

HDBaseT2.0实现了HDBaseT从专业影音向消费电子的推移，帮助建立多媒体互联家庭解决方案，能够通过一根长达百米的单芯局域网线（Cat5e或Cat6e，即通常所说的五类线、六类线）汇集非压缩高清视频（包括4K）、音频、电源、以太网、控制信号以及最高100W的功率，能够同时为多个显示屏提供5Play功能集，支持HDMI2.0。

HDBaseT并没有像HDMI跟Display Port一样重新设计一个新接口，而是采用大众都不陌生的8P8C(RJ45)接头，俗称水晶头或以太网接头，传输介质采用了人们非常易得和常见的网线。

GTB-UHD-HBT HDBaseT扩展器说明书

60Hz, 4:2:0HDBaseT Extender1.Read these instructions.2.Keep these instructions.3.Heed all warnings.4.Follow all instructions.5.Do not use this product near water.6.Clean only with a dry cloth.7.Do not block any ventilation openings. Install in accordance with the manufacturer’sinstructions.8.Do not install or place this product near any heat sources such as radiators, heatregisters, stoves, or other apparatus (including amplifiers) that produce heat.9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarizedplug has two blades with one wider than the other. A grounding type plug has twoblades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10.Protect the power cord from being walked on or pinched particularly at plugs,convenience receptacles, and the point where they exit from the apparatus.11.Only use attachments/accessories specified by the manufacturer.12.To reduce the risk of electric shock and/or damage to this product, never handle ortouch this unit or power cord if your hands are wet or damp. Do not expose thisproduct to rain or moisture.13.Unplug this apparatus during lightning storms or when unused for long periods of time.14.Refer all servicing to qualified service personnel. Servicing is required when theapparatus has been damaged in any way, such as power-supply cord or plug isdamaged, liquid has been spilled or objects have fallen into the apparatus,the apparatus has been exposed to rain or moisture, does not operate normally,or has been dropped.15.Batteries that may be included with this product and/or accessories should never beexposed to open flame or excessive heat. Always dispose of used batteriesaccording to the instructions.Gefen/Core Brands, LLC warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen LLC is notified within the specified warranty period* from the documented** date of purchase, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. This warranty is in lieu of all other warranties expressed or implied, including without limitation, any implied warranty or merchantability or fitness for any particular purpose, all of which are expressly disclaimed. Warranty period begins on the date of purchase by the original end-purchaser, as indicated on the proof of purchase document**. This Limited Warranty extends to the original end-user purchaser of the product, and is not transferrable to any subsequent purchaser(s) or owner(s). Customers outside the continental United States of America are responsible for shipping charges to and from Gefen.*Warranty period:Passive Copper Cables without any electronic circuitry: 30 days. Cables must be in their original condition.Electronics:• 2 years unless specified otherwise.• 3 years if specifically noted as such on Gefen web-page of a product.Documented** purchases made on or after March 29, 2017 only.** Proof of purchase must be a written document, as deemed acceptable by Gefen/Core Brands, LLC.Technical Support(707) 283-5900 (800) 472-55558:00 AM to 5:00 PM Monday - Friday, Pacific TimeEmail*****************WebMailing AddressGefenCore Brands, LLCc/o Customer Service1800 S McDowell BlvdPetaluma, CA 94954 USAProduct RegistrationRegister your product here: /kvm/Registry/Registration.jsp•Gefen recommends using CAT-5e (or better) cables.•Resolution will affect extension distance. 1080p Full HD can be extended up to 495 feet (150 meters) and is limited to 8-bit color depth. 4K resolutions can be extended up to 330 feet (100 meters). See HDBT (HDBaseT™) Mode (page 17) for details.•Power Over Line (POL) is a Gefen proprietary technology that provides power over a single CAT-5e (or better) cable. A power supply (1 pc included) can be connected to either the Sender or Receiver unit.•This product passes through the display’s EDID to the source. If the display is capable of accepting Deep Color, the source must be manually configured to output 8-bit color.This is only applicable when using 4K x 2K resolutions and “long-run” modes.See HDBT (HDBaseT™) Mode (page 17) for more information.•This product supports sources up to 4K 300 MHz (60 Hz 4:2:0 or 30 Hz 4:4:4). It is not compatible with sources that are capable of HDR or 4K 600 MHz (60 Hz 4:4:4).•For Standard Range operation for up to 100m/330ft maximum distance, please make sure that the DIP Switch # 3 on the bottom of the Sender unit is in “OFF” position.To enable the Extended Range (up to 150m/495ft) mode, flip the DIP switch to “ON”.Please see DIP Switch Configuration (page 14) for information on all DIP switches.•The information in this manual has been carefully checked and is believed to be accurate. However, Gefen assumes no responsibility for any inaccuracies that may be contained in this manual. In no event will Gefen be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect or omission in thismanual, even if advised of the possibility of such damages.•The technical information contained herein regarding the features and specifications is subject to change without notice.•For the latest warranty coverage information, refer to the Warranty and Return Policy under the Support section of the Gefen Web site at .© 2017 Gefen, LLC. All Rights Reserved. All trademarks are the property of their respective owners.Gefen, LLC reserves the right to make changes in the hardware, packaging, and any accompanying documentationwithout prior written notice.This product uses UL-Listed power suppliesFeatures•Extends 4K Ultra HD (3840 x 2160 @ 60Hz, 4:2:0 or @ 30Hz, 4:4:4), R S-232, and Bi-Directional R over a single CAT-5e cable up to 330 feet/100 meters (8-bit color)•Extends 4K Cinema (DCI) (4096 x 2160 @ 24 or 30Hz 4:4:4), RS-232, and Bi-Directional IR over a single CAT-5e cable up to 330 feet/100 meters (8-bit color)•Extends HDMI at 1080p Full HD, RS-232, and Bi-Directional IR over a single CAT-5e cable up to 330 feet/100 meters (up to 12-bit Deep Color)•Extends HDMI at 1080p Full HD, RS-232, and Bi-Directional IR over a single CAT-5e cable up to 495 feet/150 meters (8-bit color)•HDMI Features Supported: ►HDMI 2.0 ►HDCP 2.2 and 1.4 ►12-bit Deep Color ►LPCM 7.1 audio, Dolby® TrueHD, and DTS-HD Master Audio™ pass-through ►3DTV pass-through ►CEC pass-through ►Lip Sync pass-through •RS-232 Extension •IR extension from Sender to Receiver and from Receiver to Sender •Gefen Bi-Directional POL feature provides power to the Sender or the Receiver unit over the link cable - only one side needs external power •Uses Gefen’s implementation of HDBaseT™ technology •Advanced EDID Management •Firmware upgradable via RS-232•Locking power connector •Surface mountable1080P 60Hz, 4:2:0HDCP 2.2HDCP 2.2DCI, 4096 x 2160, 30HzFeatures and Packing List Packing ListThe following items are shipped with the 4K Ultra HD HDBaseT Extender w/ RS-232,2-way IR and POL. If any of these items are not present in the box when you first open it, immediately contact your dealer or Gefen.• 1 x 4K Ultra HD HDBaseT™ Extender w/ RS-232, 2-way IR and POL - Sender unit (GTB-UHD-HBT-S)• 1 x 4K Ultra HD HDBaseT™ Extender w/ RS-232, 2-way IR and POL - Receiver unit (GTB-UHD-HBT-R)• 1 x 6 ft. locking HDMI cable, M-M (CAB-HD-LCK-06MM)• 1 x IR extender (EXT-RMT-EXTIRN)• 1 x IR emitter (EXT-IREMIT)• 1 x Adapter: 3-pin Phoenix-to-DB-9, M-F (ADA-PH-2-DB9-MF-AA or DA-PH-2-DB9-MF-AB)• 1 x Adapter: 3-pin Phoenix-to-DB-9, M-M (ADA-PH-2-DB9-MM-AA or ADA-PH-2-DB9-MM-AB)• 1 x 24V DC locking power supply (EXT-PS24U1AIP-6)• 1 x Quick-Start Guide (QSG-GTB-UHD-HBT)1 Getting StartedIntroduction (2)Sender Unit (2)Receiver Unit (4)Installation (6)Connection Instructions (6)Sample Wiring Diagram (7)2 Basic OperationLED Status (10)Bidirectional IR Control (11)Controlling the Source from the Viewing Location (11)Controlling the Display from the Source Location (12)Controlling the Source / Display from Different Locations (13)DIP Switch Configuration (14)EDID Management (15)HPD Mode (16)HDBT (HDBaseT™) Mode (17)RS-232 Mode (17)3 Advanced OperationRS-232 Setup (20)Connecting RS-232 Devices (20)Commands (21)4 AppendixUpdating the Firmware (28)Single Update Procedure (28)Individual Update Procedure (30)Surface Mounting Instructions (32)Network Cable Diagram (33)Specifications (34)Index (35)This page left intentionally blank.This page left intentionally blank.60Hz, 4:2:0 HDBaseT Extender1 Getting Started4.Refer to Bidirectional IR Control (page 11) for details on connecting IR devices.►RS-2325.Connect the included 3-pin Phoenix-to-DB-9 (female) cable between the RS-232controller and the Sender unit.6.Connect the included 3-pin Phoenix-to-DB-9 (male) cable between the RS-232 deviceand the Receiver unit.►Power7.Connect the included 24V DC power supply (1 pc included) to the powerreceptacle on either the Sender or Receiver unit.8.Connect the opposite end of the power supply to an available electrical outlet.AutomationAutomation Control DeviceThis page left intentionally blank.60Hz, 4:2:0 HDBaseT Extender2 Basic OperationUltra HD displayHDBaseT Extender S w/ RS-232, 2-way IR and POLON RSN1 2 3 4ON1 2RS-232RS-232 ModeToggles between RS-232 pass-through mode and service mode.This page left intentionally blank.60Hz, 4:2:0 HDBaseT Extender3Advanced OperationExampleSee Updating the Firmware (page 28) for information on using this command.Example#hdcp 0Disable HDCPstop HDCP/EDID detect#helpThe #help command displays the list of available RS-232 commands. Help on a specific command can be displayed when using param1.Syntax#help param1Parametersparam1 Command name (optional)Example#helpAvailable cmds:#help#fw_upgrade#hdcp#power_always#help #hdcpCmd #hdcp: Change HDCP modeSyntax: #hdcp param1Param1 = 0(disable hdcp)/1(enable hdcp)Set Power always modeTo change power mode, Please reboot the unitThis page left intentionally blank.This page left intentionally blank.60Hz, 4:2:0 HDBaseT Extender4 AppendixThere are two methods for updating the 4K Ultra HD HDBaseT Extender w/ RS-232,2-way IR and POL. The recommended method is to update both units at the same time by leaving the Sender and Receiver unit connected. Updating the Sender unit will update the Receiver unit (or vice versa). The second method is to update the Sender and Receiver unit separately.Single Update ProcedureThis method is recommended and can be used in situations where disconnecting the system is impractical or difficult. The power supply must be connected to either the Sender or Receiver unit. The update procedure can take place at the Sender or Receiver location.1.Download the latest firmware here: /support/download.jsp2.Extract the contents of the .zip file to the desktop on your computer.3.Disconnect the power supply from the Sender (or Receiver) unit.4.Set the following DIP switches on the Sender and Receiver units:►Sender unitSet DIP switch 4, on the bottom of the Sender unit, to the ON position:►Receiver unitSet DIP switch 1, on the bottom of the Receiver unit, to the ON position:5.Connect the included RS-232 cable between the Sender (or Receiver) unit and thecomputer.unch a terminal emulation program. In this example, we will be using Windows®Hyperterminal.13.Select the firmware file: ELR_BIDIR_[version].bin.14.Select the YModem protocol and click the Send button.15.After the upgrade process is complete, the unit will automatically reboot.16.Both the Sender and Receiver units are now updated.►Receiver unitSet DIP switch 1, on the bottom of the Receiver unit, to the ON position:5. Connect the included RS-232 cable between the unit and the computer.6. Launch a terminal emulation program. In this example, we will be using Windows®Hyperterminal.(continued on next page)13.Select the firmware file: ELR_BIDIR_[version].bin.14.Select the YModem protocol and click the Send button.15.After the upgrade process is complete, the unit will automatically reboot.16.Connect the RS-232 cable to the other unit and repeat steps 8 - 15.12345678Gefen recommends the TIA/EIA-568-B wiring option. Use the following table when terminating cables in the field.Color DescriptionOrange / White TD+ (Transmit Data, positive differential signal)Orange TD- (Transmit Data, negative differential signal)Green / White RD+ (Receive Data, positive differential signal)Blue UnusedBlue / White UnusedGreen RD- (Receive Data, negative differential signal)Brown / White UnusedBrown / White UnusedShielded (STP) CAT-5 or CAT-6 is recommended. However, unshielded (UTP)CAT-5 or CAT-6 is acceptable. CAT-5, CAT-5e, and CAT-6 cabling comes in stranded and solid core types. Gefen recommends using solid core cabling. CAT-6 cable is also recommended.It is recommended to use one continuous run from one end to the other. Patch cable is not recommended.BBidirectional IR Control 11CCommands 21#fw_upgrade 21#hdcp 22#help 23#power_always 24Connection Instructions 6DDIP Switch Configuration 14 EEDID Management 15FFeatures viHHDBT (HDBaseT™) Mode 17HPD Mode 16IInstallation 6LLED Status 10Long-reach mode 17MMounting Instructions 32NNetwork Cable Diagram 33 OOperating Notes vPPacking List vii RReceiver Unit 4RS-232commands 21mode 17RS-232 Setup 20SSafety Instructions iiSender Unit 2Specifications 34TTable of Contents viiiTechnical Support ivUUpdating the Firmwareindividual update procedure 30single update procedure 28 WWarranty Information iiiWiring Diagram 7*Preferred Stretch it. Switch it. Split it. Gefen’s got it. ®。

全能接口HDBaseT接口到底是什么？HDBaseT接口的作用与应用,详细了解一下

全能接口HDBaseT接口到底是什么？HDBaseT接口的作用与应用，详细了解一下HDBaseT接口是什么？他有什么用途？说起HDBaseT接口，它的功能真的很强大，本期我们来详细了解HDBaseT接口的作用与应用。

一、什么是HDBaseTHDBaseT是高清数字显示接口，即通过一根100米/328英尺的CAT5e/6电缆，实现高清视频源和远程显示器之间的一体化连接，提供未压缩的高清4k 视频、音频、以太网、控制信号以及最高100瓦特的功率。

它是由来自日韩的家电大厂索尼、LG、Samsung以及以色列的半导体公司联盟开发的一项数据传输技术，2009年通过Intel的HDCP认证，在2010年6 月底，确定了HDBaseT L0的正式规范。

HDBaseT并没有像HDMI跟Display Port 一样重新设计一个新接口，而是采用大众都不陌生的8P8c(RJ45)接口，俗称水晶头或以太网接口，传输介质采用了我们非常易得和熟悉的网线。

HDBaseT标准除了提供视频信号传输功能外，还具有网络连接以及以太网供电(POE)功能。

因此，HDBaseT技术是一种只需要一根线便可以完成多项功能的传输技术。

二、HDBaseT接口的作用？与HDMI的区别通常要做视频传输，我们要弄各种视频信号、USB信号，hdmi线、电源线等，是一件让人头疼的事情，走线越来越复杂！怎样让一条线传输所有的这些信号呢？HDBaseT技术用一条网线解决了这个问题。

HDMI只传送音视频信号，距离也有长度限制，好的牌子HDMI信号质量只能保持30米左右，并且线材价格对于大多数使用者来说也偏高了。

虽然也有一些其它的无线技术来作为HDMI的备选方案.但是它们的最大问题是无电源传送信道、传输速率难有突破。

另外HDMI联盟加入需要费用，使用该协议也要授权费用，于是由索尼、三星、LG和瓦伦斯半导体组成的HDBaseT联盟开发了HDBaseT方案，很好地解决了上述问题。

Atlona AT-OME-ST31A 3×1 切换器和 HDBaseT 发送器产品说明书

IntroductionApplications•Complete system integrationThe OME-ST31A and a compatible HDBaseT receiver provide a compact, yet comprehensive and cost-effective integration solution.•Larger system applicationsThe OME-ST31A is ideal for extending AV connectivity from a lectern or a conference table to a remote display, where presenters can easily access the system.•Auditoriums and lecture hallsThis switcher can be used for presenting 4K video content through the projector, while also optimizing for a 1080p confidence monitor.The Atlona AT-OME-ST31A is a 3×1 switcher and HDBaseT transmitter, with HDMI and USB-C inputs. Part of the Omega™ Series of integration products for modern AV communications and collaboration, the OME-ST31A features mirrored HDMI and HDBaseT outputs and is HDCP 2.2 compliant. The USB-C input is ideal for AV interfacing with newer Mac®, Chromebook™, and Windows® PCs, as well as smartphones and tablets. Video signals up to 4K/60 4:2:0, plus embedded audio, control, and Ethernet can be transmitted over HDBaseT up to 330 feet (100 meters). All inputs and the local HDMI output support 4K HDR and 4K/60 4:4:4 at HDMI data rates up to 18 Gbps.Additionally, 4K downscaling to 1080 @ 60, 30, or 24 Hz is available for the HDMI output when connected to an HD sink. Audio de-embedding to a balanced analog audio output enables local sound reinforcement applications.The OME-ST31A is designed for remote PoE powering, and is compatible with Omega series receivers andswitchers, select HDVS series receivers such as the AT-HDVS-SC-RX scaler, the AT-UHD-EX-100CE-RX receiver, and other Atlona switchers with HDBaseT inputs.Key Features3×1 HDBaseT switcher with HDMI and USB-C inputs • USB-C and two HDMI inputs.• Immediate compatibility with laptops and tablets with USB-C ports supporting AV.(1)• No need to provide USB-C to HDMI adapters.Mirrored HDBaseT and HDMI outputs• Local and long-distance video outputs provide flexible options for AV system designs andapplications.Video, audio, power, and data over category cable utilizing HDBaseT technology• Transmits up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable.(2)• Supports 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling.4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling on local ports (HDMI and USB-C), plus support for HDR formats• Local HDMI and USB-C ports are compatible with 4K HDR10 @ 60 Hz and Dolby Vision™ @ 60 Hz,as well as HLG (Hybrid Log-Gamma) for 60p HDRbroadcast services.Mirrored HDMI output with integrated 4K to 1080p downscaling• Integrated video processing available on the HDMI output for automatic 4K/UHD @ 60 Hz to 1080(based on connected display EDID).• Ideal for applications with a mix of 1080p and UHD sink devices, and when a 1080p confidence monitor is used in conjunction with 4K/UHD presentations.Remote PoE (Power over Ethernet) or local powering • Industry standard IEEE 802.3af PoE is supplied by Atlona receiver or switcher over HDBaseT.• Allows convenient switcher installation at a table or other remote location, without the need for local AC power.• Also can be locally powered by the optional AT-PS-245-D4 power supply – to supply PoE to a receiver and charge a USB-C mobile device.Automatic display control• Automatically changes display power state based on active or standby mode of the switcher. Controlsignals to display are transmitted via IP, RS-232, orCEC.• Enables display and volume control. CEC enables control of consumer displays (as supported by thedisplay manufacturer).• Also can be configured to power off display after a period of inactivity.• Eliminates the need for a complex AV control system.Automatic input selection using hot plug detect and video detection technology• Selects active input when sources are connected or if there is a change in source power status.• Enables simplified, automatic system operation without user intervention.Audio de-embedding• De-embeds two-channel PCM audio from any video source to a balanced, analog output.Multi-channel audio compliant• Passes through multi-channel audio formats from the HDMI or USB-C inputs.• Supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS® DigitalSurround™, DTS-HD Master Audio™, and DTS:X®. EDID management• Manages EDID communications with the source through a display’s EDID or internally stored EDID.• Ensures desired audio formats and video resolutions are provided to the AV system.HDCP 2.2 management• Automatically reports HDCP compliance status to the source based on the sink device.• Allows non-protected material from PCs to pass to non-compliant displays, streaming devices, andteleconference systems; protected content is nottransmitted.• Displays a green splash screen as visualconfirmation that protected content is being blocked from transmission to a non-compliant display.Integrated HDBaseT link testing and status monitoring• Local and long-distance video outputs provide flexible options for AV system designs andapplications.• Quick, easy verification or troubleshooting of RJ-45 termination or twisted pair cable quality.Easy, GUI-based configuration using integrated web server• Offers menu-based configuration of device settings including network access, input switching, displaycontrol, HDCP and EDID management, and more.• Allows fast configuration of internal product settings and troubleshooting from a mobile device or PC inthe field.TCP/IP and RS-232 control• Flexible control options for compatibility with Atlona Velocity™ and third-party control systems.• Reduces integration time and costs.Easy to configure and manage with AMS (Atlona Management System)• Centralized, network-based configuration and management of Atlona IP-controllable products and systems.• Manage configuration and firmware updates for AV devices spanning a facility, building, enterprise, orresidence.• Available as a cost-effective server appliance, or a free software download.Field-updatable firmware• Device can be updated in the field via AMS or the web GUI.• USB port also available for firmware updates.Front panel power and signal status LED indicators • LED indicators provide power, HDBaseT link, and input selection status information.• Provides local, convenient setup and troubleshooting when network access is not available.Low-profile, 1.02 inch (26 mm) high enclosure• Easy installation into confined spaces below tables and in furniture.Included accessories• Installation guide, surface mounting hardware, and 2 meter (6.5 foot) USB-C male-to-male cable (USB 3.1 Gen 1).Award-winning 10 year limited product warranty• Ensures long-term product reliability andperformance in commercial and residential systems.• Specify, purchase, and install with confidence.SpecificationsAccessoriesDrawingsREARTOPFRONTFootnotes(1) USB-C port supports AV and device charging (with optional AT-PS-245-D4 power supply), but not USB host data.(2) To achieve optimal HDBaseT performance, CAT6a or CAT7 shielded twisted pair cable is highly recommended.(3) HDBaseT receiver or switcher must also be HDCP 2.2 compliant.(4) 4K/UHD p60 4:4:4 supported on input/output HDMI and USB-C input ports, 4K/UHD p60 4:2:0 is supported on HDBaseT output.(5) Scaler does not support frame rate conversion.Copyright, T rademark, and Registration© 2021 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here.Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation.The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI licensing Administrator, Inc.For DTS patents, see . Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, and Digital Surround are registered trademarks and/or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.All other trademark(s), copyright(s), and registered technologies mentioned in this document are the properties of their respective owner(s).20123-R2。

HBT-11 HDBaseT 影音接收器操作指南说明书

HDBaseT 影音接收器HBT-11操作指南目錄FCC 聲明 (4)安裝注意事項 (4)產品保固 (6)產品保固準則 (6)三年產品保固 (7)廢品處理 (7)1. 產品介紹 (8)產品特色 (8)2. 系統圖 (9)3. 外部連接 (10)背板 (10)前板 (11)4. RS-422接腳定義 (14)5. 產品尺寸 (15)6. 產品規格 (16)傳輸線選擇 (17)全球服務與支援 (20)產品和服務免責聲明本使用說明書中提供的資訊僅作為指南。

一直以來，Datavideo努力提供正確、完整和適當的資訊。

但Datavideo無法排除本手冊中的一些資訊可能不正確或不完整，本手冊可能包含打字錯誤、資訊遺漏或不正確資訊。

Datavideo建議您重複確認此文件資訊的準確性。

Datavideo不負任何遺漏或錯誤的責任，或任何之後本手冊內所提供資訊造成的損失或損害。

本手冊內容或產品相關更進一步的資訊可聯絡您當地的Datavideo辦公室或經銷商取得。

FCC 聲明這個設備遵照FCC規則第15節，操作程序受限於以下二個條件：(1)這個設備不能導致有害的干擾。

(2)這個設備必須可接受任一種干擾，包括可能導致非預期操作的干擾。

安裝注意事項1.使用前，請先仔細閱讀本說明書，並請妥善保存本說明書。

2.請確實遵守產品上所標示的警告標誌及說明指示。

3.清潔本機器前，請先拔掉電源插頭。

勿用液態或腐蝕性清潔劑，使用一般濕布清潔擦拭即可。

4.請勿在靠近水的地方使用本產品。

5.請勿將產品置放在不平穩的地方，像是手推車、立架等，以免掉落造成產品嚴重損害。

6.本產品外殼、背部及底部的開孔是為了散熱用的，請勿覆蓋或塞住這些開孔，以免造成機器過熱。

避免將本產品置放在床、沙發、毯子…等表面類似的物品上，才不會塞住開孔。

請勿將本產品置放在靠近火源、暖氣爐或熱氣口的地方。

除非確定有適當的通風口，否則請勿將本產品置放在一個密閉式的空間裏。

7.本產品所使用之電源，請依照電源轉換器上的標示。

HDBaseT传输器HB-10的使用说明

说明：1.HDBaseT 传输器HB-10是一款集成HDBaseT 技术的传输器，发送端和接收端配套使用。

2.采用普通CAT.5e/ 6网线作为传输线缆，提高HDMI 信号传输距离和图像质量，传输距离最远可达70米，3.在满足所有未压缩1080p 及内嵌音频信号传输的同时，支持4K*2K 超高清信号的传输。

4.通过单根线缆不仅可传输HDMI 信号，还可同步传输RS232或RS485信号。

传输距离：1.使用CAT.5e/ 6网线控制信号传输距离。

2.使用CAT.5e/ 6网线视频信号传输距离。

接线方法：使用时，通过CAT5e/6网线连接发送端HDBTX 口与接收端HDBRX 口，发送端各信号输入口分别接入所需的相应信号源，接收端各信号输出口分别接上所需的相应输出设备，如下图：HB-10发送端连线方法HB-10接收端连线方法网口指示灯状态：注意事项：1.本产品支持HDCP ；2.发送端、接收端不可混用，需按规则连接，否则会导致信号；3.各接口应使用相应的接口线连接；4.本产品支持热插拔，但为避免电器损坏，不建议经常性热插拔常见问题解答：Q ：输出物图像无声音。

HDbaseT高清传输更简单

HDbaseT高清传输更简单HDbaeT支持最高20Gbp的传输速率，能更好的支持未来的3D和2K某4K视频格式，传输采用普通的CAT5e/6网络线缆，连接器也采用普通的RJ45接头，而传输距离达到了100米，除了提供视频信号传输功能外，还具有网络连接以及以太网供电(POE)功能。

HDBaeT，由来自日韩的家电大厂LG、Samung、Sony等公司，以及以色列的半导体公司ValenSemiconductor，组成了HDBaeT联盟，2022年通过Intel的HDCP认证，在2022年6月底，确定了HDBaeT1.0的正式规范。

HDBaeT并没有像HDMI跟DiplayPort一样重新设计一个新接口，而是采用大众都不陌生的8P8C(RJ45)接头，俗称水晶头或以太网接头，传输介质采用了人们非常易得和常见的网线。

HDbaeT支持最高20Gbp的传输速率，能更好的支持未来的3D和2K某4K视频格式，传输采用普通的CAT5e/6网络线缆，连接器也采用普通的RJ45接头，而传输距离达到了100米，除了提供视频信号传输功能外，还具有网络连接以及以太网供电(POE)功能。

产生因素HDMl缺点成就HDBaeT在如今的LCDTV、高清STB、蓝光DVD中，HDMI已经成为“事实性”的高清视频传输接口标准.但是它也有先天的不足。

比如切换延时长.在观看高清电影或者电视时.切换至HDMI后.用户需要等待较长的时间。

HDMI只能传送非压缩的音视频信号，并且传输距离限制在5米以下，线材价格偏高。

虽然目前也推出了诸如WiGig、wHDI和WireleHD等无线技术来作为HDMI的备选方案.但是它们在无电源传送信道、传输速率等方面难有突破。

此外.HDMI阵营内部也存在不少问题。

首先就是各主要成员各自为战.并没有真正统一HDMI应用规范。

比如HDMI规范中本有一项装置串连的规范.使用HDMI线串接的装置可以通过一个遥控器同时控制相关功能.例如连接音响与电视.当用电视遥控器按下音量.则会连同音响的音量一起调整。

HDBaseT 扩展器安装指南说明书

To reduce the risk of fire or electric shock, read and follow all instructions and warnings in this manual. Keep this manual for future reference.1. Do not expose this apparatus to rain or moisture. Do not expose this equipment to drippingor splashing, and ensure that no objects filled with liquids, such as vases, are placed on the equipment. Do not use this apparatus near water.2. Do not remove cover. No user serviceable parts inside.3. Clean only with a dry cloth.4. Do not block any ventilation openings. Install according to manufacturer’s instructions.5. Do not install near any heat sources such as radiators, heat registers, stoves or otherapparatus (including amplifiers) that produce heat.6. Do not override the safety purpose of the polarized or grounding plug. A polarized plug hastwo blades, one of which is wider than the other. A grounding plug has two matching blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.7. Protect the power cord from being walked on or pinched, particularly at the plug end andwhere the power cord is attached to the apparatus.8. Only use attachments and accessories specified by the manufacturer.9. Refer all servicing to qualified service personnel. Servicing is required when the apparatushas been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled on or objects have fallen into the apparatus, the apparatus hasbeen exposed to rain or moisture, the apparatus does not operate normally, or it has been dropped.10. To completely disconnect this equipment from power, disconnect the power supply cordfrom the power outlet.The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of suninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.21. Product Overview (4)2. Features (4)3. Package Contents (4)4. Device Layout (5)4.1. B-520-EXT-230-RS-W Transmitter (5)4.2. B-520-EXT-230-RS-W Receiver (6)5. Installation (7)5.1. B-520-EXT-230-RS-W Transmitter Installation (7)5.2. B-520-EXT-230-RS-W Receiver Installation (7)6. Applications (8)6.1. HDBaseT Link (RJ45) Connection (8)6.2. IR Control Connections (9)6.2.1. Point-to-Point IR Control — Stereo (3.5mm) IR Receiver (10)6.2.2. Control System - Mono (3.5mm) IR Receiver (10)6.2.3. IR Flasher Out — Mono (3.5mm) (11)6.3. RS-232 Control Connections (11)6.3.1. RS-232 Control (DB-9) Connection (12)6.3.2. RS-232 Operation Mode / Firmware Update Operation (12)6.4. HDMI Out (Transmitter) (13)6.5. EDID Configuration (13)6.5.1. Auto EDID (13)6.5.2. HDBT EDID (13)6.6. Thread-Locking Power Connector (14)6.7 Optional Remote Power (Receiver Only) (14)7. Specifications (15)8. Support (16)9. Warranty (16)3Welcome to Binary. This product is engineered to provide years of exceptional reliability. We appreciate your business, and we stand committed to providing our customers with the highest degree of quality and service in the industry.This device extends HDMI over a single category cable using HDBaseT technology allowing video and audio transmission to remote displays. In addition, the device is equipped with bidirectional IR and RS-232 over the same category cable.Since many installations are behind flat screen TVs, the B-520-EXT-230-RS-W receiver is made to mount in a double gang box. This receiver is PoC capable and can be optionally powered at the receiver via the front thread-locking power connector or the optional rear remote power connection.This unit supports all HDMI defined audio and video formats, including 4K2K@30 Hz. Additionally, the design has been improved to solve the clock-stretching issue that can arise with cable boxes when used with HDBaseT extenders.• Improved design to support clock-stretching issue• In wall receiver (double gang box) design for easy installationExtends all HDMI formats up to:•• Bidirectional IR and RS-232• PoC capable - can be powered from either the transmitter or receiver• Remote power option• 1x B-520-EXT-230-RS-W Transmitter• 1x B-520-EXT-230-RS-W Receiver• 1x 12V DC, 2A Power Supply• 1x Dual Gang Face Plate• 2x Screws• 1x Installation Manual• 1x Power Supply Label• 2x HDBaseT Labels44.1. B-520-EXT-230-RS-W TransmitterFIGURE 1: Transmitter LayoutA. Thread-locking Power ConnectorConnect to the included 12V DC, 2A power supplyB. Power LEDLights up blue when the unit has powerC. HDMI INHDMI Input to connect to the HDMI output of a sourceD. HDMI OutHDMI Output to connect to the HDMI input of a sink(display)E. IR FlasherIR output to connect to IR FlasherF. IR ReceiverIR input to connect to IR Receiver or to output of a control systemG. IR Flasher levelAdjusts the intensity of the IR Flasher outputH. DIP SwitchesIR RCVR PWR OFF/ONOFF to connect to control system | ON to connect to IR ReceiverDCE/DTETo select if serial (RS232) communication via DB-9 is in DTE or DCE modeSERVICE /LINK (RS-232)SERVICE for firmware operation | LINK for passthrough (normal) operationHDBT EDID/AUTO EDIDHDBT to set EDID to resolution of sink at the HDBaseT Receiver end | AUTO to set EDID to lowest common resolutionI. RS-232To communicate RS-232 command with the receiver when connected to a control system J. HDBaseT (RJ45 )To connect to the HDBaseT RJ45 port on receiverK. Link LEDLights up green when synced with receiverL. Update (mini USB port)To connect mini USB cable when updating firmware54.2. B-520-EXT-230-RS-W ReceiverFIGURE 2: Receiver LayoutA. HDMI OutHDMI Output to connect to the HDMI input of a sink(display)B. IR ReceiverIR input to connect to IR Receiver or to output of a control systemC. IR FlasherIR output to connect to IR FlasherD. IR Flasher levelAdjusts the intensity of the IR Flasher outputE. HDBT Link LEDLights up green when synced with receiverF. HDCP LEDLights up green when HDCP link has been established; Blinks when content does not require HDCP; Off when no HDMI signal is recognizedG. HDBT HPD LEDLights up green when Hot Plug event is DetectedH. Power LEDLights up blue when the unit has powerI. Thread-locking Power ConnectorConnect to the included 12V DC, 2A power supplyJ. RS-232To communicate RS-232 command with the transmitter when connected to a control systemK. DIP SwitchesIR RCVR PWR OFF/ONOFF to connect to control system | ON to connect to IR ReceiverDCE/DTETo select if serial (RS232) communication via DB-9 is in DTE or DCE mode67SERVICE /LINK (RS-232)SERVICE for firmware operation | LINK for passthrough (normal) operationL. Optional Remote Power (2 Conductor Removable)Optional connection for power from a remote power source; 2/18 wire requiredNote: Use only when the Latch-Locking Power Jack is not being used. Do not connect both power sources.M. HDBaseT (RJ45 )To connect to the HDBaseT RJ45 port on transmitter5.1. B-520-EXT-230-RS-W Transmitter InstallationDo not connect power to the device until all other connections are made and the unit is installed.1. Run category cable from the location of the transmitter to the remote location of the receiver.2. Mount the device transmitter in the desired location.3. Connect the category cable to the device transmitter.4. Connect the HDMI Out of a source component to the HDMI In of the transmitter using an HDMI cable.5. Connect the RS-232 DB-9 from a control system if being used.6. Connect an IR control system to the IR receiver and/or IR flasher if being used. Refer to Section 6.2.7. Connect the 12V DC, 2A power supply to the thread-locking power connector unless PoC is being used to send power from the receiver. DO NOT plug the power supply into an AC outlet until Receiver Installation is completed.5.2. B-520-EXT-230-RS-W Receiver Installation1. Run category cable from the location of the transmitter to the remote location of the receiver.2. Mount the device receiver in the desired location.3. Connect the category cable to the device receiver.4. Connect an IR flasher and/or IR receiver if being used. Refer to Section 6.2.5. Connect an HDMI cable from the HDMI Out of device receiver to the display.6. Connect the RS-232 DB9 to an RS-232 controllable source if being used.7. Connect the 12V DC, 2A power supply to either the thread-locking power connector, or the optional remote power connector, unless PoC is being used to send power from the transmitter.8. Connect the power supply to the AC outlet.FIGURE 3 : Application DiagramNote: When a power supply is connected to either the transmitter or receiver, the HDBaseT link sends power to the other unit. Only one unit requires a power supply to be connected.6.1. HDBaseT Link (RJ45) ConnectionThis device is specified to operate with category cables for communication between the transmitter and receiver. The transmission path may include a maximum of two keystones and two patch cables, as long as the total length does not exceed 200' for Cat 5e/6 and 230' for Cat 6a/7.TIA/EIA Standard 568-B (Gold Pins Facing Up)Pin 1White/Orange Pin 5White/BluePin 2Orange Pin 6GreenPin 3White/Green Pin 7White/BrownPin 4Blue Pin 8BrownFIGURE 4: RJ45 ConnectionsNote: The HDBaseT Link RJ45 connection includes a 12V signal. Do not connect anything to this port other than an HDBaseT transmitter or receiver.896.2. IR Control ConnectionsBidirectional IR signals can be transmitted between transmitter and receiver through category cable. The IR signal can be generated either from a powered receiver or from a control system.The following section describes these two use cases.Pinout configurations for IR receivers and control systems vary. Beforeconnecting to this input, review this section carefully in order to match the pinouts for the device.FIGURE 5: IR ConnectionsNote: Arrow direction indicates signal flow.IR Receiver In-3.5 mm Mono—See Section 6.2.2IR Receiver In-3.5 mm Stereo—See Section 6.2.1IR Flasher Out-3.5 mm Mono—See Section 6.2.3D HDBaseT Link category cable (RJ45)—See Section 6.1106.2.1. Point-to-Point IR Control — Stereo (3.5mm) IR ReceiverWhen using a powered IR receiver, the DIP switch for IR RCVR PWR should be set to ON. In this case a 3.5mm (1/8") stereo jack has to be used to send 9V DC power to the receiver. connect a mono cable to this connection as damage may occur.FIGURE 6: Point-to-Point IR settings6.2.2. Control System - Mono (3.5mm) IR ReceiverWhen using a control system which generates the signal through a mono jack, the IR RCVRPWR switch should be in the OFF position.FIGURE 7 : Control System IR settingsReceiverPinout ConfigurationTransmitter ReceiverPinout Configuration6.2.3. IR Flasher Out — Mono (3.5mm)The IR Flasher level adjusts the intensity of the IR Flasher outputFIGURE 8: IR Flasher Out6.3. RS-232 Control ConnectionsBidirectional RS-232 signals are transmitted between the device transmitter and receiver overthe category cable. The transmitter may be connected to a control system, and the receivermay be connected to an RS-232 controllable device.RS-232 Control (DB-9)- See Section 6.3.1HDBaseT Link category - See Section 6.1FIGURE 9: RS-232 Connections11126.3.1. RS-232 Control (DB-9) ConnectionTo eliminate the need to make crossover or null modem cables, the RS-232 pinouts can be configured for DCE or DTE. Set switch 2 to DCE if the connected device is DCE, and to DTE if the connected device is DTE.Typically the control system will be DTE and the controlled device will be DCE, however, devices may vary. Refer to the manual for the connected devices for proper pinout configuration.FIGURE 10: RS-232 Modes and Connections6.3.2. RS-232 Operation Mode / Firmware Update OperationThe RS-232 connection can also be used for firmware updates in addition to sending RS-232signals. The DTE/DCE switch is used to set the RS-232 Mode.Note: The SERVICE/LINK switch must set to LINK during normal RS-232 passthrough operation.To perform firmware updates, the DIP switches must be set to DTE and SERVICE. Detailed instructions and updated firmware will be posted to as they are released. Note: The DIP switch should be set to LINK during normal operation.FIGURE 11: Firmware Update settingsReceiverDTE Mode RS-232 DB-9 PinoutsDCE ModeTransmitterReceiver6.4. HDMI Out (Transmitter)We recommend using an HDMI cable that is 1 meter or less to ensure the highest signal quality.This HDMI Out is used to connect to local TV/displays.6.5. EDID ConfigurationThere are two EDID operating modes available for HDMI loopout. The EDID settingdetermines if the source connected to the HDMI input chooses the EDID from the displayconnected to the HDMI out on the transmitter and/or the display connected to the HDMI out on the receiver6.5.1. Auto EDIDWhen the EDID DIP switch is set to AUTO, the lowest common EDID setting between thedisplay connected to the transmitter and the display connected to the receiver will be applied to both displays.TransmitterFIGURE 12: Auto EDID Mode6.5.2. HDBT EDIDWhen the EDID DIP switch is set to HDBT, the EDID from the display connected to theHDBaseT receiver will be applied to both displays.FIGURE 13: HDBT EDID Mode13146.6. Thread-Locking Power ConnectorThis extender pair is Power over Cable capable and therefore can be powered from either the transmitter or receiver. When a power supply is connected to either the transmitter orreceiver, the HDBaseT link sends power to the other end.connect the power supply to the device until it is completely 6.7 Optional Remote Power (Receiver Only)Power for the B-520-EXT-230-RS-W receiver can be supplied via a remote power source when use of the Latch-Locking Power Jack is not desired. The connection is a 2 conductor removable plug located on the rear of the B-520-EXT-230-RS-W receiver. The recommended cabling is one 18 gauge per leg or two 22/ 24 gauge per leg.Observe the connections polarity markings. Reversing the polarity may cause damage to the product.FIGURE 14: Remote Power Pin OutThe included WPS-ACC-PWR-DC Power Plug can be used to convert the single plug of a power supply to 2 wires. This eliminates the need to cut the wires on the end of a power supply.FIGURE 15: Power Plug+ (POS)- (GND)15Need Help? Contact Tech Support!If you need further clarification, please call tech support at 866.838.5052, or email support@ . For other information, instructional videos, support documentation, or ideas, visit our website and view your item’s product page at .2-Year Limited WarrantyThis Binary product has a 2-Year limited warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).Rev: 151228-1000© 2015 Binary。

至龙HDBaseT-Lite传输器用户手册说明书

User ManualAtlona HDBaseT-Lite Transmitterover Single CAT5e/6/7AT-HDTX1. Introduction (3)2. Package Contents (3)3. Features (3)4. Specifications (3)5. Panel Descriptionsa. Front Panel (4)b. Rear Panel (4)6. Captive Screw Connection (5)7. Connection and Installation (6)8. Safety Information (7)9. Warranty (8)10. Atlona Product Registration (9)Table of ContentsBandwidth frequency 10.2GbpsInput Ports 1 x HDMI (female)1 x Mini USB1 x Captive Screw (Power)Output Ports 1 x RJ45Resolution outputs Video: up to 4Kx2KVesa: up to 1920x1200Distance 230ft @ 1080p over CAT6a/7197ft @ 1080p over CAT5e/6130ft @ 4Kx2K over CAT cableDimensions (HxWxD) 0.95 x 2.87 x 2.72 (inch) or 2.4 x 7.3 x 6.9 (mm)Weight 0.187lbs or 0.085kgTemperature Operating: 32°F to 104°F or 0°C to 40°CStorage: -4°F to 140°F or -20°C to 60°CPower consumption 9.1WIntroductionTransmit up to 230ft (70m) of uninterrupted 1080p signal with the Atlona HDBaseT-Litetransmitter. With pass through support of 4Kx2K, 1920x1200, as well as Lossy & Lossless audio signals over a single CAT cable, the HDTX provides an affordable, high quality, solution for your audio/video needs.Package ContentsFeatures• 1 x AT-HDTX• 1 x 24V/1.25A DC Power Supply• 1 x Female Captive Screw Connector• 1 x Pair of wall/rack mount ears• 1 x User Manual• Extends audio and visual content up to 230ft* @ 1080p over a single CAT cable• Supports 4Kx2K pass through• Provides PoE (Power over Ethernet) to compatible receivers• Lossy, and lossless multi-channel audio formats pass through (including Dolby TrueHD and DTS-HD Master Audio)• Full 3D pass through• HDCP compliantSpecificationsPanel DescriptionFront Panel1. Firmware Update Port: Use Mini USB to USB cable to connect to a Windows computer to update.2. HDMI IN Port: Connect HDMI or DVI (with adapter) source here.3. Yellow Link LED: Signal Indicator for the CAT5e/6/7 OUT port. LED will remain solid, unless there is an issue with the cable or signal, then it will blink.4. Green Power LED: Power indicator. If plugged in light will remain solid. If LED starts blinking power is intermittent or there is a problem with the cable. If LED is off, no power is passing to the receiver (check your outlet or the power cable).1342Back Panel1. Power Port: Connect included captive screw connector and power adapter here.2. CAT5e/6/7 OUT Port: Connect CAT5e/6/7 cable from here to a compatible receiver.Ex. AT-HDRX (recommended)12Captive ScrewConnectingCaptive screw connectors are an added feature on the HD Extenders. The Captive screw connectors allow you to cut cables down to a suitable length, reducing cable clutter, and provides a more reliable connection.The captive screw connectors have a contact bar that is moved to compress the wire to the top contact plate. Use the screws at the top of the connector to compress the wire against the contact plate.When connecting the cables to the female captive screw connector it is important that the wires beterminated correctly. The female captive screw connector (see picture A) has a contact plate at the top and must have the wires touching it for signal to pass. When wired correctly (see picture B) the signal will pass, incorrectly (see picture C) no signal will pass.Clockwise CounterClockwiseTurn the screws clockwise toraise the contact bar to the upper contact plate and hold the wiresin place.Turn the screws counter clockwise to lower the contact bar to release the wires.A B C To ensure the power cable isn’t too long, a captive screw connector has been included. The pin out (see picture 3) and the wire configuration (see picture 4 and 5) are shown below.Black : - White : +4- +35For your convenience the cables do not come pre-terminated. The power cable (picture 1), will have wires exposed. Each wire is encased in a different colored cover. A female captive screw connector for power is included (see picture 2).21PowerConnection and InstallationSafety InformationSafeguardsPrecautionsFCC regulations state that any unauthorized changes or modifications to this equipment, notexpressly approved by the manufacturer, could void the user’s authority to operate this equipment.Operate this product using only the included external power supply. Use of other power supplies could impair performance, damage the product, or cause fires.In the event of an electrostatic discharge this device may automatically turn off. If this occurs, unplug the device and plug it back in.Protect and route power cords so they will not be stepped on or pinched by anything placed on or against them. Be especially careful of plug-ins or cord exit points from this product.Avoid excessive humidity, sudden temperature changes or temperature extremes.Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements, fish tanks, and swimming pools.Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or aerosols. Such products could enter the unit and cause damage, fire, or electric shock. Some substances may also mar the finish of the product.Never open, remove unit panels, or make any adjustments not described in this manual. Attempting to do so could expose you to dangerous electrical shock or other hazards. It may also cause damage to your AT-HDTX. Opening the product will void the warranty.Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona reseller or contact Atlona directly.To reduce the risk of electric shock, do notexpose this product to rain or moistureIf the wall plug does not fit into your localpower socket, hire an electrician to replaceyour obsolete socket.Do not modify the wall plug. Doing so will void the warranty and safety features.This equipment should be installed near the socket outlet and the device should be easily accessible in the case it requiresdisconnection.WarrantyLimited WarrantyAtlona Technologies warrants that (a) its products (AT-HDTX) will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt. Some jurisdictions do not allow such limitations on duration of an implied warranty, so the above limitation may not apply to customers that fall within those areas.Atlona Technologies’ and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Technologies’ decision, either return of the price paid for the product, repair, or replacement of the product that does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of the Customer’s receipt. This Limited Warranty is void if failure of the product has resulted from accident, abuse, misapplication, or natural occurrence. In example but not limited to: power surges (electrical storms, local power outage), dropping the product (or items on the product), contact with fluids, and physical misconduct (i.e. kicking or punching). Any replacement product will be warranted for the remainder of the original warranty period.To the maximum extent permitted by applicable law, Atlona Technologies and its suppliers disclaim all other warranties, either expressed or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, with regard to the product and any related written materials. This Limited Warranty gives customer specific legal rights. Customers may have other rights depending on the jurisdiction.To the maximum extent permitted by applicable law, in no event shall Atlona Technologies or its suppliers be liable for any damages arising out of the use of or inability to use this product, even if Atlona Technologies has been advised of the possibility of such damages. Such damages include but are not limited to: special, incidental, consequential, or indirect damages for personal injury, loss of business profits, business interruption, loss of business information, or any other pecuniary loss. Atlona Technologies’ and its suppliers’ entire liability under any provision of this agreement shall be limited to the amount actually paid by you for the product. Some Jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damage. The above limitations may not apply to you in such jurisdictional cases.Customer Remedies No other warrantiesNo liability for damagesThank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase.Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates.At Atlona we respect and protect your privacy, assuring you that your registration information is completely secure. Atlona product registration is completely voluntary and failure to register will not diminish your limited warranty rights.To register go to: /registration。

HDBASET等HDMI单网线传输器

UH-1BTXHDMI双绞线传输器HDBaseT技术，支持4k,传输距离：100米；可切换长距离模式传输1080P：150米（包含一个发送器及一个接收器）技术参数●视频标准:DVI(单链路）和HDMI（支持HDMI1.4，支持3D和4K)；●信号类型：TMDS；●连接器:带锁扣的HDMI；●视频分辨率：DVI信号：VGA（640*480)至WUXGA（1920*1200）；● HDTV信号：480i至1080P；●数字信号：4K（4096*2160）●音频支持格式：所有HDMI嵌入音频；●其他信号：DDC：通过DDC远程连接LCD和HDCP手持直接读取EDID；● CEC：通过DDC控制兼容的家用电子设备；常规：●电源供应：100VAC至240VAC ,50-60HZ，外部；5VDC，2.6A，额定●额定功率：发送端：最大2.25瓦●接收端：最大4.25瓦●温度/湿度：存储：（-40℃至+70℃）/10%至90% 不凝结●操作：（-40℃至+70℃）/10%至90% 不凝结●安装：有孔L支架便于终端安装●外壳标准：金属（钢和铝压制）●尺寸：（高30mm*宽70mm*长98mm)深度不包含连接器●产品重量：产品（0.35kg)●运送（0.7kg)●平均故障间隔时间：90000小时型号UH-1BT HDBaseT技术，支持4k,传输距离：70米，包含一个发送器及一个接收器UH-1BTX HDBaseT技术，支持4k,传输距离：100米（长距离模式：150m)，包含一个发送器及一个接收器UH-1DHDMI双绞线传输器单网线传输器，传输距离：1080P-45米，1080i-55米；支持3D；发射端带环出；红外双向传输；接收端音频解嵌；包含一个发送器及一个接收器技术参数●视频标准:DVI(单链路）和HDMI（支持HDMI1.4，支持3D）；●信号类型：TMDS；●连接器:带锁扣的HDMI；●视频分辨率：DVI信号：VGA（640*480)至WUXGA（1920*1200）；● HDTV信号：480i至1080P；●音频支持格式：所有HDMI™嵌入式音频通过HDMI™输出和数字音频输出：●模拟音频输出只支持2通道未压缩的音频；常规：●电源供应：100VAC至240VAC ,50-60HZ，外部；5VDC，2.6A，额定●额定功率：发送端：最大2.25瓦●接收端：最大4.25瓦●温度/湿度：存储：（0℃至+40℃）/10%至90% 不凝结●操作：（-40℃至+70℃）/10%至90% 不凝结●安装：有孔L支架便于终端安装●外壳标准：金属（钢和铝压制）●尺寸：（高30mm*宽70mm*长98mm)深度不包含连接器●产品重量：产品（0.35kg)●运送（0.7kg)●平均故障间隔时间：90000小时型号UH-2D双网线传输器，传输距离，1080P-45米，1080I-55米；单端供电；支持3D；包含一个发送器和一个接收器支持分辨率:PC：VGA至WUXGA,HDTV：480i至1080p最远电缆长度:Cat6:1080p(40米),1080i及以下（52米）输入功率:5v DC at 2A max.。

hdbaset原理

hdbaset原理HDBaseT原理及其应用引言HDBaseT（High Definition Baseband Transmission）是一种高清视频、音频、以太网、电源和控制信号通过一条普通的Cat5e/6/7网线进行传输的技术。

它是由HDBaseT Alliance联盟推出的一种开放标准，旨在解决多媒体传输中的复杂性和限制性问题。

本文将介绍HDBaseT技术的原理以及在各个领域的应用。

一、HDBaseT技术原理HDBaseT技术的核心原理是通过将视频、音频、以太网、电源和控制信号转换为数字信号，然后使用5Play功能将这些信号通过一根普通的Cat5e/6/7网线进行传输。

具体来说，HDBaseT技术包括以下几个方面的内容：1.1 5Play功能HDBaseT技术的5Play功能，即支持高清视频传输、音频传输、以太网传输、电源传输和控制信号传输。

通过将不同的信号转换为数字信号并进行压缩和编码，可以使这些信号在一根网线上同时传输，从而实现了多媒体传输的一体化。

1.2 压缩和编码为了在有限的带宽下实现高质量的多媒体传输，HDBaseT技术使用了高效的压缩和编码算法。

这些算法可以将视频、音频等信号进行压缩，并将其转换为数字信号，从而减小传输的数据量，提高传输效率。

1.3 8P8C连接器HDBaseT技术使用了8P8C连接器，也就是我们常见的RJ45接口。

通过这种标准化的接口，HDBaseT可以与现有的网络设备兼容，提高了可扩展性和灵活性。

二、HDBaseT技术的应用领域HDBaseT技术的应用非常广泛，下面将介绍一些主要的应用领域。

2.1 家庭影音系统在家庭影音系统中，HDBaseT技术可以将高清视频、音频和控制信号通过一根网线传输到不同的设备，如电视、音响、投影仪等。

这样一来，用户就可以在不同的房间中享受高质量的影音体验，而无需为每个设备单独布线。

2.2 会议室和教育场所在会议室和教育场所中，HDBaseT技术可以将视频、音频和控制信号传输到显示器、音响和投影仪等设备，实现高清视频会议和教学。

hdbaset标准

hdbaset标准HDBaseT是一种高清视频、音频、数据和电源传输的连接技术，能够通过一根网络电缆将多种信号传输到远距离的设备之间。

它是一种用于家庭娱乐系统、会议室、医疗设备和自动化控制系统等领域的标准连接接口。

本文将介绍HDBaseT标准的相关内容。

首先，HDBaseT标准是由HDBaseT Alliance制定和推广的，用于统一高清视频、音频、数据和电源传输的标准。

该联盟是一个由各大电子产品和技术公司组成的国际组织，致力于推动HDBaseT技术的发展和应用。

HDBaseT标准于2010年发布，并经过多年的发展和完善，已成为行业内的主流连接技术之一。

HDBaseT标准的主要特点是通过一根普通的Cat5e/6/7网络电缆传输多种信号。

与传统的HDMI、VGA等连接方式相比，HDBaseT能够实现更远的传输距离，最高可达100米。

同时，HDBaseT还支持高清视频的无损传输，能够达到4K分辨率和60Hz刷新率。

此外，HDBaseT还能够传输音频、以太网、USB和控制信号，为用户提供更加便捷和灵活的接口。

在实际应用中，HDBaseT标准被广泛应用于各种场景。

在家庭娱乐系统中，HDBaseT可以将高清视频和音频信号从媒体中心传输到电视机、投影仪等设备，使用户能够在不同的房间里享受高品质的影音效果。

在会议室和教育领域，HDBaseT可以将演示文档、视频会议和网络数据等内容传输到显示屏、投影仪和互联网设备上，实现无线接入和远程控制。

此外，HDBaseT还在医疗设备、自动化控制系统和智能家居等领域得到广泛应用，为各种设备之间的连接提供了便利。

除了传输距离和传输内容的多样性，HDBaseT标准还具备其他一些值得注意的特点。

首先，HDBaseT是一种开放标准，可以与其他标准和接口兼容。

其次，HDBaseT的安装和使用非常简单，用户只需一根网络电缆即可完成传输。

第三，HDBaseT支持POH（Power over HDBaseT）功能，可以通过网络电缆为目标设备提供电源，减少了电源线的使用，提高了设备的灵活性。

卓同HDBaseT传输器

HDbaseT技术解析

HDbaseT技术解析

HDBaseT延长器HB-30的使用说明

PureLink PT-HDBT-702-RX HDBaseT接收器说明书

HDBaseT 70米传输器

HDBaseT网线传输器HB-20的使用说明

HDBaset传输器HB-10

HDBaseT高清信号延长技术及应用简介

GTB-UHD-HBT HDBaseT扩展器说明书

全能接口HDBaseT接口到底是什么？HDBaseT接口的作用与应用,详细了解一下

Atlona AT-OME-ST31A 3×1 切换器和 HDBaseT 发送器 产品说明书

HBT-11 HDBaseT 影音接收器 操作指南说明书

HDBaseT传输器HB-10的使用说明

HDbaseT高清传输更简单

HDBaseT 扩展器安装指南说明书

至龙HDBaseT-Lite传输器用户手册说明书

HDBASET等HDMI单网线传输器

hdbaset原理

hdbaset标准

Atlona AT-OME-ST31A 3×1 切换器和 HDBaseT 发送器产品说明书

HBT-11 HDBaseT 影音接收器操作指南说明书