工程造价管理控制论文英文翻译

合集下载

工程造价专业外文文献翻译(中英文对照

外文文献：Project Cost Control: The Way it WorksBy R. Max WidemanIn a recent consulting assignment we realized that there was some lack of understanding of the whole system of project cost control, how it is setup and applied. So we decided to write up a description of how it works. Project cost control is not that difficult to follow in theory.First you establish a set of reference baselines. Then, as work progresses, you monitor the work, analyze the findings, forecast the end results and compare those with the reference baselines. If the end results are not satisfactory then you make adjustments as necessary to the work in progress, and repeat the cycle at suitable intervals. If the end results get really out of line with the baseline plan, you may have to change the plan. More likely, there will be (or have been) scope changes that change the reference baselines which means that every time that happens you have to change the baseline plan anyway.But project cost control is a lot more difficult to do in practice, as is evidenced by the number of projects that fail to contain costs. It also involves a significant amount of work, as we shall see, and we might as well start at the beginning. So let us follow the thread of project cost control through the entire project life span.And, while we are at it, we will take the opportunity to point out the proper places for several significant documents. These include theBusiness Case, the Request for (a capital) Appropriation (for execution), Work Packages and the Work Breakdown Structure, the Project Charter (or Brief), the Project Budget or Cost Plan, Earned Value and the Cost Baseline. All of these contribute to the organization's ability to effectively control project costs.FootnoteI am indebted to my friend Quentin Fleming, the guru of Earned Value, for checking and correcting my work on this topic.The Business Case and Application for (execution) FundingIt is important to note that project cost control is most effective when the executive management responsible has a good understanding of how projects should unfold through the project life span. This means that they exercise their responsibilities at the key decision points between the major phases. They must also recognize the importance of project risk management for identifying and planning to head off at least the most obvious potential risk events.In the project's Concept Phase• EvEry projEct starts with somEonE idEntifying an opportunity or need. That is usually someone of importance or influence, if the project is to proceed, and that person often becomes the project's sponsor.• to dEtErminE thE suitability of thE potEntial projEct, most organizations call for the preparation of a "Business Case" and its"Order of Magnitude" cost to justify the value of the project so that it can be compared with all the other competing projects. This effort is conducted in the Concept Phase of the project and is done as a part of the organization's management of the entire project portfolio.• thE cost of thE work of preparing the Business Case is usually covered by corporate management overhead, but it may be carried forward as an accounting cost to the eventual project. No doubt because this will provide a tax benefit to the organization. The problem is, how do you then account for all the projects that are not so carried forward?• if thE businEss casE has sufficiEnt mErit, approval will bE givEn to proceed to a Development and Definition phase.In the project's Development or Definition Phase• thE objEctivE of t he Development Phase is to establish a good understanding of the work involved to produce the required product, estimate the cost and seek capital funding for the actual execution of the project.• in a formalizEd sEtting, EspEcially whErE big projEcts arE involved, this application for funding is often referred to as a Request for (a capital) Appropriation (RFA) or Capital Appropriation Request (CAR).• this rEquirEs thE collEction of morE dEtailEd rEquirEmEnts and data to establish what work needsto be done to produce the required product or "deliverable". From this information, a plan is prepared in sufficient detail to give adequate confidence in a dollar figure to be included in the request.• in a lEss formalizEd sEtting, EvEryonE just triEs to muddlE through.Work Packages and the WBSThe Project Management Plan, Project Brief or Project Charter• if thE dElivErablE consists of a numbEr of diffErEnt ElEmEnts, thEsE are identified and assembled into Work Packages (WPs) and presented in the form of a Work Breakdown Structure (WBS).• Each wp involvEs a sEt of activitiEs, thE "work" that is plannEd and scheduled as a part of the Project Management Plan. Note, however, that the planning will still be at a relatively high level,and more detailed planning will be necessary during execution if the project is given the go ahead.• this projEct managEmEnt plan, by thE way, should bEcomE thE "bible" for the execution phase of the project and is sometimes referred to as the "Project Brief" or the "Project Charter".• thE cost of doing thE various activitiEs is thEn EstimatEd and thEsE estimated costs are aggregated to determine the estimated cost of the WP. This approach is known as "detailed estimating" or "bottom up estimating". There are other approaches to estimating that we'll come to in a minute. Either way, the result is an estimated cost of the totalwork of the project.Note: that project risk management planning is an important part of this exercise. This should examine the project's assumptions and environmental conditions to identify any weaknesses in the plan thus far, and identify those potential risk events that warrant attention for mitigation. This might take the form of specific contingency planning, and/or the setting aside of prudent funding reserves.Request for capitalConverting the estimate• howEvEr, an EstimatE of thE work alonE is not sufficiEnt for a capital request. To arrive at a capital request some conversion is necessary, for example, by adding prudent allowances such as overheads, a contingency allowance to cover normal project risks and management reserves to cover unknowns and possible scope changes.• in addition, it may bE nEcEssary to convErt thE Estimating data into a financial accounting formatthat satisfies the corporate or sponsor's format for purposes of comparison with other projects and consequent funding approval.• in practicE all thE data for thE typE of "bottom up" approach just described may not be available.In this case alternative estimating approaches are adopted that provide various degrees of reliability in a "top down" fashion. Forexample:Order of Magnitude estimate – a "ball park" estimate, usually reserved for the concept phase onlyAnalogous estimate – an estimate based on previous similar projects Parametric estimate –an estimate based on statistical relationships in historical data• whichEvEr approach is adoptEd, hopEfully thE sum thus arrivEd at will be approved in full and proves to be satisfactory! This is the trigger to start the Execution Phase of the projectNote: Some managements will approve some lesser sum in the mistaken belief that this will help everyone to "sharpen their pencils" and "work smarter" for the benefit of the organization. This is a mistaken belief because management has failed to understand the nature of uncertainty and risk in project work. Consequently, the effect is more likely to result in "corner cutting" with an adverse effect on product quality, or reduced product scope or functionality. This often leads to a "game" in which estimates are inflated so that management can adjust them downwards. But to be fair, management is also well aware that if money is over allocated, it will get spent anyway. The smart thing for managements to do is to set aside contingent reserve funds, varying with the riskiness of the project, and keep that money under careful control.Ownership of approved capital• if sEnior managEmEnt approvEs thE rfa as prEsEntEd, thE sum in question becomes the responsibility of the designated project sponsor. However, if the approved capital request includes allowances such as a "Management Reserve", this may or may not be passed on to the project's sponsor, depending on the policies of the organization.• for thE approvEd rfa, thE projEct sponsor will, in turn, further delegate expenditure authority to the project's project manager and will likely not include any of the allowances. An exception might be the contingency allowances to cover the normal variations in work performance.• thE nEt sum thus arrivEd at constitutes the project manager's Approved Project Budget.Note: If management does not approve the RFA, you should not consider this a project failure. Either the goals, objectives, justification and planning need rethinking to increase the value of the project's deliverables, or senior management simply has higher priorities elsewhere for the available resources and funding.The Project's Execution PhaseThe project manager's Project Budget responsibility• oncE this approvEd projEct budgEt is rElEas ed to the project manager, a reverse process must take place to convert it into a working control document. That is, the money available must be divided amongstthe various WBS WPs that, by the way, have probably by now been upgraded! This results in a project execution Control Budget or Project Baseline Budget, or simply, the Project Budget. In some areas of project management application it is referred to as a Project Cost Plan.• on a largE projEct whErE diffErEnt corporatE production divisions are involved, there may be a further intermediate step of creating "Control Accounts" for the separate divisions, so that each division subdivides their allocated money into their own WBS WPs.• obsErvE that, sincE thE total projEct budgEt rEcEivEd formal approval from Executive Management, you, as project manager, must likewise seek and obtain from Executive Management, via the project's sponsor, formal approval for any changes to the total project budget. Often this is only justified and accepted on the basis of a requested Product Scope Change.• in such a casE thE projEct's sponsor will EithEr draw down on thE management reserve in his or her possession, or submit a supplementary RFA to upper management.• now that wE havE thE projEct budgEt monEy allocatEd to Work Packages we can further distribute it amongst the various activities of each WP so that we know how much money we have as a "Baseline" cost for each activity.• this providEs us with thE basE of rEfErEncE for thE cost controlfunction. Of course, depending on the circumstances the same thing may be done at the WP level but the ability to control is then at a higher and coarser level.Use of the Earned Value technique• if wE havE thE nEcEssary dEtails anothEr control tool that wE can adopt for monitoring ongoing work is the "Earned Value" (EV) technique. This is a considerable art and science that you must learn about from texts dedicated to the subject.• but EssEntially, you takE thE costs of thE schEdulE activitiEs and plot them as a cumulative total on the appropriate time base. Again you can do this at the activity level, WP level or the whole project level. The lower the level the more control information you have available but the more work you get involved in.The Cost Baseline• this plannEd reference S-curve is sometimes referred to as the "Cost Baseline", typically in EVparlance. That is, it is the "Budgeted Cost of Work Scheduled" (BCWS), or more simply the "Planned Value" (PV).• Observe that you need to modify this Cost Baseline every time there is an approved scope change that has cost and/or schedule implications and consequently changes the project's Approved Project Budget.• now, as thE work progrEssEs, you can plot thE "actual cost of workPerformed" (ACWP or simply "Actual Cost" - AC).• you can plot othEr things as wEll, sEE diagram rEfErrEd to abovE, and if you don't like what you see then you need to take "Corrective Action".CommentaryThis whole process is a cyclic, situational operation and is probably the source of the term "cycle" in the popularly misnamed "project life cycle".As an aside, the Earned Value pundits offer various other techniques within the EV process designed to aid in forecasting the final result, that is, the "Estimate At Completion" (EAC). EAC is what you should really be interested in because it is the only constant in a moving project. Therefore, these extended EV techniques must be considered in the same realm of accuracy as top-down estimating. They are useful, but only if you recognize the limitations and know what you are doing!But, as we said at the beginning, it is a lot more difficult to do in practice –and involves a significant amount of work. But, let's face it, that's what project managers are hired for, right?中文译文：项目成本控制：它的工作方式R.马克斯怀德曼我们在最近的咨询任务中意识到，对于整个项目成本控制体系是如何设置和应用的这个问题，我们仍有一些缺乏了解。

工程造价成本管理外文文献

Evaluation of the influence of the organizational environment on projectcost management based on the Grey Relational AnalysisZhi Dou,Wenjun YangCollege of Civil Engineering ，Chang'an University ，Xi'an 710061，ChinaKeywords ：the Organizational Environment, Engineering Project, Cost Management, ImpactEvaluation, Grey Relational AnalysisAbstract. From the organizational environment perspective, to explore the influence factors ofproject cost management, and to determine a evaluation system about the influence of theorganizational environment on project cost management. Using gray system theory to build a modelof the gray relational analysis between organizational environment and project cost management.The examples show that this method has a certain theoretical significance and practical value tosolve the project cost management.IntroductionAccompanied by the rapid development of China's construction industry and the further openingup of construction markets, the uncertainty of the external environment which constructionenterprises face increased, the underpricing bid between enterprises for contending projects, thedrastic fluctuation in raw material prices, the entering barriers are down while the exit cost are stillhigh, the ferocious entering momentum of foreign builders, these make China constructionenterprises stand in a competitive industry, and its profit margins are severely squeezed. The way toeffectively control the project cost has already become a focus of attention of constructionenterprises. Survey shows that the extensive management approach of China's constructionenterprises currently has not been fundamentally changed, the corporate structure, operationalprocesses and infrastructure management is weak, the level of project management is low, and theexisting project cost should be improved in aspects about management concepts, objectives, meansand so on [1].The effective implementation of advanced cost management methods must considerenterprises' particular organizational environment, Kaplan and Norton believes, the advanced costmanagement and evaluation methods break away from its corresponding organizationalenvironment, the possibility to success almost not exists [2].Therefore, the objective understandingof the organizational environment the construction enterprises face, and the comprehensive analysisabout the mechanism of the organizational environment to the project cost management for theconstruction cost management is essential.The determination of the affecting factor system of the project cost management byorganizational environmentOrganizational environment is a sum of forces and conditions which exist in the internal andexternal organization and affect the organizational performance. There are many environmentalfactors in internal and external organization, but not all of these factors constitute the organization'senvironment, the factors who has no impact on organizational performance do not belong to theenvironmental factors of organization, and elements of the organizational environment is often influx, the dynamics of environment perform clearly in a background of fierce competition both indomestic and foreign markets [3].According to the organization's controllable degree to its faced environment, the organizationalenvironment can be divided into two categories: the internal organizational environment and theexternal organizational environment. The external environment that construction enterprises face isthe sum of various factors which exist around the construction organization and affect the businessactivities and development of enterprises. The external environmental uncertainty of constructionInternational Conference on Education Technology, Management and Humanities Science (ETMHS 2015) © 2015. The authors - Published by Atlantis Press 985enterprises include the general environmental uncertainty and the task environmental uncertainty,the general environmental uncertainty include the uncertainties which brought for constructionenterprises from the political environment, economic environment, legal environment and technicalenvironment, and the task environmental uncertainty include the uncertainties which brought forconstruction enterprises from new entrants, owners, suppliers and existing competitors.Through the above analysis, the several affecting factors of the project cost management by theorganizational environment were researched; this paper considers the factors are: organizationstructure, control system and social relations. And the table 1, the affecting factor system of theproject cost management by organizational environment, is built by these factors.Tab.1. the Affecting Factor System of the Project Cost Management by Organizational EnvironmentFirst class index Second class indexThird class indexProject CostManagementA Organization Structure 1B Organization Framework 1C Internal Coordination 2C Internal Restriction 3CControl System 2B Budget Mechanism 4CAccounting Mechanism 5CMonitoring Mechanism 6C Analyzing Mechanism 7CChecking Mechanism 8CMaterial Cost Management 9CProject Manager Management 10CSocialRelations 3B Major Stakeholder 11C External Communication andCoordination 12CEvaluation of the influence of the organizational environment on project cost managementbased on the Grey Relational AnalysisTo determine the weighing values of all levelsBecause of the important degree of the influence of the above indexes on project cost are notidentical, it is required to determine the weights.We can choose to invited several experts whoadopted the ratio scale method to compare two factors, and to determine the ratio scale betweenvarious factors, as shown in table 2, then in turn collect the statistics of frequency mij of each indexratio scale Cj.()jij C i j m U U c n= （2.1） In the formula, mij is the number of times of Ui ∈ci; n is the number of experts to participate inthe evaluation; Uci(Ui) is the ratio scale of Ui belong to the cj, we can get the ratio scale()j n i C i j i R U U ==∑ （2.2）986Tab.2. The meaning of the scaledivision meaning1 Have the same importance3 The former is a bit more important than the latter5 The former is obviously more important than thelatter7 The former is particularly more important than thelatter9 The former is extremely more important than thelatter2,4,6,8 The median value of the above-mentioned adjacentvaluereciprocal The degree that the latter is more important than the formerCalculate the feature vector W of matrix H, inspect whether have stochastic consistencybetween matrix H and the feature vector W, and compute consistency index CI=(λmax-n)/(n-1),when CR=CI/RI<0.10, the consistency of judgment matrix is satisfied, or need to adjust thejudgment matrix. Among them, the elements Wi(i=1,2,...n) of W represents the lower the weight ofeach index relative to its upper part index.Quantitative treatment of indicatorsEvaluation index can be divided into two types: quantitative index and qualitative index.Qualitative indicators are unquantitative fuzzy evaluation index, thus the comprehensive fuzzyevaluation method of quantitative index can be used. By experts fuzzy scoring in the first place,reoccupy the average value to quantify according to the fuzzy membership degree just as is shownin table 3.Tab.3. The fuzzy membership listfuzzy language best bette r goo d general ly ba d wors e wor stmembership 0.8 0.7 0.6 0.5 0.40.3 0.2 To determine the reference data sequence and compared sequenceIn order to evaluate the eligible object data sequence, the first thing is to determine theevaluation reference data sequence, usually write to uik=(ui1,ui2,...uin),k=1,2,...s.A comparison with reference data sequence uik have n data index sequences, and each datasequence (scheme) have s factors (indicators), then these comparative data column can be written asU0=(u10,u20,...un0)T.To determine the reference sequence, according to the comparison reference sequence types ofindicators selected, index of different types, different values of the methods. Seen in the literatureindex types have six kinds, including efficiency, cost, fixed type, range, deviation and deviationinterval[4].Index correlation calculation of index layerIn order to ensure the quality of modeling and get the right system analysis, the data must becarried out on the original data standardization transformation and data processing, so that thedimension can be eliminated and the data can be comparable. in correlation analysis, the mostcommon methods were used in data transformation are initial value transformation method, themean transformation method, full transformation method, unitary transformation method, multiplechanges, poor maximum transformation method, standardized method and interval valuetransformation method[4-5]. In this paper, using the standardized method for data processing, namely:,1,2,,k k i i i u x k s u == （2.3） 987In the formula, 0 means the reference solution.Corresponds to a sequence of reference data, there are a number of comparative data sequence,the ith comparative data with reference data sequences in the first k corresponding indicators of relative difference is the correlation coefficient, can be expressed as()0000min min max max max max 1,2,;1,2,k k i i i i k i k i ki k k i i i i i k X X X X X X X X i n k s ηξη-+-=-+-== （2.4）Type: η is distinguish coefficient, 0<η<1, typically take η=0.5.The weighted average correlation coefficient under various factors11(1,2,;1,2,)n k k k i k n i n k s γωξ====∑ （2.5）Type: ωk is the weight, 0≤ωk≤1.According to the comparison and analysis of correlation, multi-level comprehensive evaluationof the construction project cost management is adopted. Generally speaking, the bigger thecorrelation of engineering project cost management level was, the engineering project costmanagement situation greater. In this way, we can made a more objective comprehensiveevaluation for the construction enterprise project cost management situation, and use this asreference data for the management of engineering project cost.ExampleNow with the influence of A, B, C three construction enterprise environment present situation onthe engineering project cost management as an example to illustrate the specific application ofevaluation model of gray association analysis.The index classification, the classification and the weight of each index of A, B, C threeconstruction enterprise organizational environment , are shown in table4 the comprehensiveevaluation of engineering project cost management.Tab.4. The project cost management comprehensive evaluationLevel indicator s The weigh t The second Level indicators The weig ht the index sequence of Project cost management evaluation A B C 0i uB 10.3 C 1 0.4 0.4 0.6 0.5 0.6C 2 0.3 0.5 0.7 0.6 0.7 C 3 0.3 0.6 0.7 0.5 0.7B 20.4 C 4 0.2 0.7 0.6 0.4 0.7C 5 0.15 0.7 0.6 0.5 0.7C 60.1 0.6 0.5 0.5 0.6 C 7 0.2 0.5 0.5 0.6 0.6 C 8 0.1 0.6 0.5 0.5 0.6C 9 0.12 0.6 0.6 0.7 0.7C 10 0.13 0.6 0.5 0.5 0.6B 3 0.3C 11 0.56 0.7 0.6 0.6 0.7 C 12 0.44 0.5 0.5 0.6 0.6Weight is index to describe the affection of properties and various indicators of project costmanagement evaluation , scored by the expert , calculated the weight according to the type 2.1, 2.2 ,through the consistency check, in view of the length, not do detailed calculation here.Determine the optimal index (reference sequence)According to the principle of determining the optimal index, we can determine the referencesequence 0(0.6,0.7,0.7,0.7,0.7,0.6,0.6,0.6,0.7,0.6,0.7,0.6)i u =988Data standardization processBy the evaluation index system of project cost management, the evaluation index points belongto three classes. Processed the index sequence standardized according to the type (2.3) , threeclassification subset sequence are obtained. Calculate the absolute difference between the evaluation and the reference sequences sequencematrix, the calculation results are as follows:1max 0.33B ∆=，1min 0B ∆=；2max 0.17B ∆=，2min 0B ∆=；3max 0.43B ∆=，3min 0B∆=. Evaluation of the primary engineering project cost managementTake the resolution 0.5η=, the correlation coefficient of each subset can be calculated accordingto the type (2.4) , and correlation coefficient matrix is established. The table 4 shows that for Ⅰindexes, the weights 12(0.4,0.3,0.3)B ω=. According to the type (2.5) , he correlation of this indicator canbe calculated. [][]11120.330.370.541110.40.30.30.4110.470.50.540.37T B B B γωξ⎡⎤⎢⎥=⋅=⋅=⎢⎥⎢⎥⎣⎦On the basis of above, the primary evaluation can be conducted. For the class index, the sort ofthree construction enterprise correlation is C > B > A, which the index of engineering project costmanagement of construction enterprises B is optimal, C construction enterprise take the second, Abusiness is the worst.Similarly for II indexes, []20.790.350.5B γ=, we can judge that the optimal is A enterprise and Benterprise is the worst. For III indexes, []30.810.580.58B γ=, we can judge the optimal is A enterprise, B and C enterprise is the same.According to the corresponding evaluation results, management of construction enterprise projectcost management is optimized.The secondary comprehensive evaluation of the gray correlation analysisFrom the primary evaluation,we can be see that in the category of different indicators of thesame construction enterprise, both the optimal and the worst index category of engineering projectcost management can be appeared. Obviously , it is difficult to reflect the overall condition of theengineering project cost management. Therefore, all categories should be considered to thesecondary comprehensive evaluation on engineering project cost management. Primary indexweights ω1=(0.3,0.4,0.3), according to the type (2.5) ,we can get comprehensive correlation degree [][]10.410.790.8110.350.580.30.40.30.680.610.520.470.500.58T A γωξ⎡⎤⎢⎥=⋅=⋅=⎢⎥⎢⎥⎣⎦ Order By the correlation size:A B C γγγ>>. As you can see, the construction enterprise project costmanagement situation of quality for A is the best, B enterprise second, C enterprise is the worst.ConclusionBased on actual engineering project cost management, this paper considers the organizationalenvironment factors and builds the organization environment factors to the engineering project costmanagement. With gray correlation analysis method to engineering project cost managementconducts a multi-level evaluation, obtains different levels of management evaluation results, theresult is consistent with the actual situation of construction enterprise.shows that this method hascertain theoretical significance and practical value. But in this study, the main factors affecting theproject cost management may have failed to be included in some factors, such as enterprise culture,national macro policy and other factors. In future study, we can further complete factors through thedesign organization environment impact on the engineering project cost of questionnaire.989References[1] XuTang.Based on the strategy of target cost management method in the application of international engineering contracting project .Chong qing.Southwestern university of finance and economics , 2003:6-7.[2] Kaplan,Norton.Strategic center type organization. Beijing:Ren min university of China publishing house,2001.[3] Yan Haifeng,Wang Ruixu.The modern organization theory and organizationinnovation.Beijing:People's posts and telecommunications publishing house,2003:61-81.[4] Wu Weidong , Jing Guoxun,Wei Jianping. Grey correlation analysis in six coal mine ventilation system scheme (recent) the application of the optimization . Journal of coal , 2001, 34(3): 290-293.[5] Xiao Xinping, Song Zhongmin,Li Feng.Gray technology base and application.Beijing: Science press.2005.990。

外文翻译-工程造价管理浅论(中英文对照)

the stage of the project cost managementAbstract：Project cost management is the basic contents to determine reasonable and effective control of the project cost. Described the current stage of the project cost management situation on the strengthening of the various stages of construction cost management of the importance of and raised a number of key initiatives.Keywords：project cost；the current stage of the project；project cost management；Even under the WTO and China's accession to the world community，China's construction industry how to effectively control construction cost of the construction and management of an important component part. However，the current budget for the construction projects - estimate，budget，Super budget accounts for the "super three" is still widespread and that eventually led to a serious loss of control of project investment. Project cost management is the basic contents to determine reasonable and effective control of the project cost.As the project cost to the project runs through the entire process，stage by stage can be divided into Investment Decision stage，the design and implementation phases. The so-called Project Cost effective control is the optimization of the construction plans and design programs on the basis of in the building process at all stages，use of certain methods and measures to reduce the cost of the projects have a reasonable control on the scope and cost of the approved limits.Engineering and cost management work of the current status of project cost management system was formed in the 1950s，1980s perfect together. Performance of the country and directly involved in the management of economic activities. Provisions in the design stage to different estimates or budget preparation as well as government; Nothing relevant departments to formulate a budget，content，methods and approval，the budget will provide the fixed cost of equipment and materials and fixed price of the budget preparation，approval，management authority，and so on.With the historical process，after recovery，reform and development，formed a relatively complete budget estimate of quota management system. However，as the socialist market economic development，the system's many problems have also exposed. Generally speaking，the budget estimate is based on direct participation in the management of national economic activity as a precondition. Enterprise is not the actual economic entities. Due to the characteristics of the planned economy，and，at the time under the conditions of productivity，will inevitably become a shortage in the economy.In severe shortage of commodities under the conditions，as long as a certain level of investment，will be certain outputs. In this environment，the project planning and technical argumentation there can be no economic analysis. State control of the project cost constitute key factors equipment and materials prices，wages and taxes of artificial distribution. In this relatively stable economic environment，the budget estimate for the system approved project cost，help the government to carry out investment plans to play a major role.As the socialist market economic system established，requires us to predict project investment and control. In recent years，international investment project developed to the requirements of prior pre-control and in the middle of control. China，the traditional practice in an objective light onthe cause decision-making，implementation heavy，light the economy and technology，First，the consequences of victimization，Due to the technical personnel of the project technical and economic concepts and a weak awareness of cost control，cost management makes the quality difficult to raise. Project Cost control is difficult to achieve long-term goals.Second，the various stages of the project management view of the above circumstances，My first academia in the 1980s made the whole process of cost management and control concept，building departments will study the feasibility of projects and the budgets and final accounts to two extended at the request of the corresponding regulations put our cost management concepts and methods referred to a new height.Our task now is to be modern and cost management in line with China's national conditions of the market economy system goal，learn from the advanced experience of the developed countries，and establish sound market economic laws of project cost management system，efforts to increase the project cost levels. An investment decision-making phase of the project cost management construction project investment decision-making stage is proposed project proposals; conduct a feasibility study to determine investment estimation and the final preparation of design task. At this stage，the project's technical and economic decision-making，of the construction project cost of the project after the completion of the economic benefits have a decisive influence，The construction cost is an important stage control.China's current stage of the project cost for the project management for the purpose of clearing price，and focusing only on the construction process of cost control，neglected before the start of the project investment decision-making stage of cost control. Investment decision-making phase of investment projects is estimated an important basis for decision-making. Ithas a direct impact on national economic and financial analysis of the results of the reliability and accuracy. Because of this phase is the preliminary work of projects，the information cannot be fully，comparable works more or less that information accumulated relatively small，estimated inadequate and unscientific. Makes project cost management and cost workers is difficult at this stage do something.The various stages of the project cost control in the decision-making phase project cost control. Right project planning phase of the cost，many owners have the wrong understanding that the lower the cost the better. Cost control is not a unilateral issue，and should be a number of factors，a combination of practical，comprehensive consideration. The construction project investment decision-making stage，the project's technical and economic decision-making，Cost of the project after the completion of the project and the economic benefits，with a decisive role in project cost control is an important stage，rationally define and control the direction of the project cost of accurate positioning and building Optimization guiding role.In the decision-making phase of the most important is to do a good job feasibility study，the work is done well，returns on investment and can form a good proportion. Otherwise，invest more，less effective，resulting in loss of control and waste of investment.At present，some of the projects planned the owners of departure from the subjective desires of a feasibility study on the lack of scientific proof. Feasibility Study untrue，false or engineering functions obtaining the approval of their superiors，actually put into the feasibility study will be awarded in the study for the project after the smooth functioning buried a lot of hidden problems，lead to insufficient follow-up funds for the project andhad to extend the time limit so that the project could not have planned the use of cost-effective，even become hopeless completion of the beard works.Therefore，in order to phase in the investment decision-making effectively control construction costs，we must do the following aspects: Implementationof the construction project and corporate accountability，Construction of the project from planning to implementation of the entire process and the use of the funds to repay responsibilities to the people. in addition to establishing a legal system and the project supervision matching mechanism by the departments in charge of the industry and supervision departments for setting up a monitoring group to oversee the use of funds.A realistic approach to market analysis，to avoid the blindness of the project decision-making，reduces and reduces investment risk. Fully consider building projects in the future market competitiveness，design task more scientific and reliability.Capital financing must have a formal commitment document，the parties must do investment funds in place，and funds must have documents to ensure that the project can be approved after the scheduled implementation. To the various loan conditions should be carefully analyzed to minimize the burden of interest and repayment pressure.To strengthen the engineering geology，hydrology，geology and land，water，electricity，transport，environmental projects such as external conditions for the work of depth to make the investment estimate there are sufficient grounds.Taking extensive investigation and research，comparison of similar projects，seriously functional analysis，multi-program comparison and choice. After full technical appraisal and economic evaluation，and the final technologically advanced，functional and reliable. Reasonable economic projects，thus calculate a more accurate and realistic estimation of theamount of investment，so that the project cost from the start positioning in a more reasonable level.The design phase of the project cost control for a long time，China's building control very effective，- investment projects is not uncommon，this will affect owners of investment returns，it adds to the owners and within budget，as well as difficulties in fund owners，the impact on the future management or the owners make payments in arrears，and so on. Hence，the control of the project cost is of great significance，however the project cost is the primary means of control design，Currently most of the property owners in the design stage seldom works on cost control，and they found that the cost of the design will not have a great impact，it is wrong，on the contrary，Design phase of the project cost control is the most important step. Because it determines engineering design，construction methods，materials and equipment types，models of the project cost is of critical significance，design optimization phase of the program or minor changes，project cost will have a significant impact，Design phase of the project cost control of the total project cost of 70%. Following is how to control the project from design to create the Law: As the owners must design，the design selected on the quality level is a direct impact on the quality of product design level，and the design quality products in the level of direct influence on the pricing of the works. Different design units on the same project design are different. the same item of different design institute works between certain aspects of the project cost on the existence of differences between，We assume that with a design from two different design institute to design，Construction plans after the completion of a requested advisory unit cost to do the budget，certainly different design institute the total cost of the project is absolutely not the same，and most of the difference between the two over 10% even more than30%，and not necessarily high cost than the design of low cost，and good design is often low cost，We all know that different people have different design styles and different levels，the design works naturally，therefore chosen to design units is the control on the first step. Through tender to select the design of the units is a good method，the tender documents to elaborate on this particular aspect of the requirements，cost control targets，and so on.Otherwise，in the subsequent design process design units will put an increase in the cost of the design requirements; through tendering the project design into the market，compared to select the best design units.Promoting the design bidding and design optimization campaign mode design units assessed by experts using scientific group France，in accordance with applicable，economic，aesthetic principles and advanced technology，reasonable structure to meet building energy efficiency and environmental requirements，comprehensive assessment of the merits of the program design，selection of the best determination of the successful program.Successful investment program estimated to be close to the general construction project scope of investment. This means two design contracts will help design the program of choice and competition to ensure that the selected design advanced technology，unique novelty，adaptability，as well as to control the cost of the project. Design units should strive to improve their quality of the project design clever idea，contemporary reducing the project cost on to rack their brains to improve design quality，strive to put the design phase of the project cost control approval of the investment ceiling.Strengthening the design stage of the design phase to strengthen supervision of the Commissioner to determine a reasonable design，maturetechnology，reduction in the construction phase major design changes and changes in the program，in the effective control of the project cost will play a role. 1 to the design of the project if the project supervision to get involved，excluding unfavorable factors may generally is excluded from the 80% errors. In the entire process of building cost control，construction began at best to save and invest 20%，the key lies in the construction phase of the identification and control costs. Supervision of the design phase include : Design Institute under the design drawings and notes help owners deal with different design options for the economy，capital expenditure to develop the preliminary estimates，to ensure that the investment can be most effectively utilized. With the owners of the Commissioner include:According to the Design Institute to provide design drawings and notes to help owners deal with different design options for the economy，capital expenditures to develop the preliminary plan to ensure that investment can be most effectively used; with the owners of different design options，the need to calculate their own materials and equipment to conduct a cost analysis and study，to the design staff costs，to assist them in the investment limit within limits designed to save and invest. To seek a one-time small investment and economic good design program made the most rational economic indicators.Design actively promote the so-called cap limit design，even with the approval of the design task and investment estimates，guarantee the functional requirements of the premise. The preliminary design and control budget，according to the preliminary approval of the total budget for the design and construction design control. Limits，and every one professional，each of whom have a design threshold of a target. In the design process，designers should progress to more programs，design optimization，ensuring that the design is technically advanced and reasonable，innovative，stylish，and do not break the limit investment objectives，thus eliminating theengineering design raise the factor of safety and design standards，or only consider the technical feasibility of the program，rather than economic rationality phenomenon，the project cost to ensure effective control.Also known as the value of value engineering analysis，is a modern scientific management technique，is a new techno-economic analysis，is the product of functional analysis to conserve resources and reduce the cost of the purpose of an effective method. It made up for the traditional cost management simply focus on cost reduction and quality management only emphasizes improving the quality deficiencies，construction is conducive to resolving the long-standing long period，a lot of wastage，poor quality，high-cost problems. Value Engineering laws generally divided into three steps: assessment of the design of object technology and economic Score; Calculation of the target group of technical and economic indicators; calculate the geometric design of the object，on average; From comparison choose the best design.Construction phase of the project implementation unit construction cost management to control the cost of the project is reasonable in the project to meet quality standards premise，in the investment decision-making stage，the design phase and construction phase of the project put the project approval occurred in the control limits，strive in various construction projects rational use of human，material and financial resources to achieve good investment returns and social benefits.The project cost control and management is a dynamic process. The dynamic market economy，to make the investment in the identification and control become more complex，this will require the construction units to the management of project cost to the project runs through the entire process，it is necessary to have a comprehensive focus. The implementation phase of the projects. The implementation phase of the project cost management is theimplementation of the entire process of project management. Project implementation phase of the project cost management can be divided into three parts: the tender management，construction management and settlement management.Bidding for the construction phase of the construction units Bidding system control engineering cost effective means，bid organization can improve the cost-effectiveness of construction projects and ensure the quality of construction projects，shortening the construction cycle return on the investment，construction units can take full advantage of bidding for the effective means of cost control.Construction No. 10 on the 7th ministerial decree issued a "contract with the Construction Contract Pricing Management." clearly pointed out in bidding for projects using inventories. This requires the building of units conducting the tender exercise，in the tender document to include not only the usual content，like tender notes before schedule，tender notes，the conditions of the contract，the contract terms of the agreement，contract format，technical specifications，drawings，tender documents and other reference format，it is also necessary to provide the engineering inventory，Bidding as a reference document of the important components.Construction units in the tender document for the project inventory，in accordance with state or local rules promulgated by the calculation that the reunification of the divided projects，unified measurement units and the reunification of the engineering calculation rules，according to design drawings to be calculated and statistical arranged，obtain the list. Quantities to be followed in the preparation of an objective，impartial，scientific，and rational principle. Compilers must have strong manly budget，and should have certain knowledge of the engineering design and construction experience，and the material and mechanical construction technology forcomprehensive scientific knowledge，in order to calculate the volume of the works without heavy missed. The basis of which must be in accordance with state regulations engineering calculation rules，and the sub-projects division engineering units，and in accordance with design drawings，design essential Love tender documentation requirements are calculated.Quantities of the project should have a testing general，the entries must be simple，while not appear Lousing wrong items Pricing should guarantee the correctness of the project. Should the requirements of the different grades separate engineering division，the situation was different; We may have different prices for the items separately. This requires the preparation of the list compilers，seriously study design drawings，Analysis of the tender documents include the elements of the work and the different technical requirements，all familiar with the process，and to the scene of serious investigation，is forecast to make possible the construction of the case，right will have an impact on the Price of projects to be broken down. In addition，because the project inventories to calculate the amount of the project is not complete engineering and consider the interests of the construction units，clearly paying the price for the same overall price，the quantity list by the number of actual construction is a practical terms.In the evaluation and review of the tender offer should do the units total individual Price quotations and the comprehensive assessment. Price does not meet the requirements of individual shows Price meets the requirements，and the lowest total Price could not explain the single lowest bidder. Bidders often know the total cost to maintain the same circumstances; the project is likely to change smaller projects to lower the price.Changes may be larger projects price increases to achieve the completion of clearing works will be added for the purpose. We would also do price and the corresponding quantity of comprehensive engineeringassessment of the large volume of projects to focus on the price analysis. Price will do with the contents of the work，construction program，a comprehensive technical evaluation process，thereby preferred choice of a construction unit. Construction of the construction phase of the contract cost control basis. Signed tight construction contract，while strengthening the construction contract management can guarantee that the contract price is reasonable，legitimacy and reduce the performance of the contract A，B in disputes and safeguard the interests of both the contract，effective control of the works investment costs.After the signing of the contract，to do the management contract documentation，contract and the supplementary contract agreement until the regular meeting site in minutes. Work contacts such as a single content of a contract extension and explained that the integrity must be preserved，in addition to establishing a technical files，Implementation of the contract for dynamic analysis，results of the analysis to take proactive measures.Construction phase in the construction phase construction plan is based on the budget or Ken works contract price of the target，Ken control the cost of the project. At this stage of conservation has room for a small，but the possibility of waste is great. Thereby to control the cost of the project to give sufficient attention.Construction program to strengthen the comparative technical and economic construction program is construction design of a re - to the contents of the work，a reasonable construction plan，shorten the construction period and ensure the quality of the project，improving economic efficiency，Construction of the program right from the technical and economic evaluation were compared，through qualitative and quantitative analysis，the quality，time，Cost three technical and economic indicators，be rational，and effective use of manpower，material and financial resources，achieve better economic efficiency，good construction management relations，a comprehensive cost management is an important way.Strictly related changes to the project budget control in the proposed budget. Construction of the changes caused by many reasons，including works poorly designed，so that the engineering contract with the drawings provided inconsistent; The current market supply of materials does not meet the standard specifications of the design requirements. These issues have to leave breadwinner project cost factors. Therefore，in the construction process，we must tighten customs change，through no design changes to expand the scale and improve the design standards; increase the construction and contents，the best implementation of the "grade control，visa quota" system. Right to change the design，particularly as it relates to the cost of the design changes must be approved by the design units，construction units scene representatives，supervision engineers common signature，and should be ahead of this type of change，reduce losses，because it has been completed or partially completed project will entail the demolition of the contents，it is bound to cause major changes to the loss. Therefore，the construction units should be assigned to the project cost management professionals Permanent construction site，to grasp at any time. Control project cost of the changes.Works on the scene visa formalities through strict control of the construction project supervision system，the establishment of specialized departments，Professional use of the professional management of projects and to avoid project management personnel just visas，not economic account of the phenomenon. Investment out of control caused serious consequences. To serious change visa procedures to be taken to the building，Supervisor，the construction site together representatives signed the way toensure that change，visa authenticity，legitimacy，economic and avoid fraud and the resulting phenomena arising from the dispute.In the course of construction，the construction units to enhance on-site construction management，supervision and construction side according to the drawings，and strictly control the change of the negotiations，materials substitution，the scene visas，and various additional extra budgetary labor costs for the necessary changes should be done first afterwards，after money，Change event on the timely change in the calculation of the workload and the cost of change occurred to grasp at any time cost of the project level，things to avoid a backlog of work that the true cost of the project.Construction unit representatives to the scene to supervise doing a good job record，particularly concealed records and visas，reduce clearing the passing phenomenon. Many works visa scene is not as serious，works to bring a very large settlement of the trouble，lead to considerable economic losses，the scene strict visa management of the construction phase of the project cost control key.Of project list rigorous review of the project on the review of inventories，Engineers’ monitor list of measures to control the project. BOQ to provide the list of measures is to complete construction projects，occurred in the pre-construction engineering and construction process technology，life and safety aspects of non-engineering projects entities. At this stage because many projects are in construction plans and the construction site of the imperfections on the tender wait until the construction tender of the project design and actual scene have better access. Management Engineer addresses the gathering first-hand information on the original，itemized checking identification，inconsistent make revisions.Control material consumption，rationally define material prices. Cost of the project control materials price control is the main，the cost of materials in engineering often holds substantial proportion，usually accounts for the estimated costs of 70%，representing the direct costs of 80%. It is necessary in the construction phase in strict accordance with the contract amount of material control; material set reasonable prices，so as to effectively control the cost of the project. Market economy material supply a variety of channels，variety and price range materials，construction unit budget management and field personnel should pay close attention to market rates，with the progress of the scene，the market，hand in the construction of the information and materials for the completion of the accounts provide a strong basis.Technology and economic integration，strengthening investment control. Effective control of the investment，from organizational，technical，economic，contracts，and other measures. Therefore，the construction units must strengthen management，engineering and technical personnel of the "economy" concept，the quality of education，Training pragmatic working style，the construction side to help improve construction design，reasonable security，financial，and material resources. Accelerate the pace of work to improve the quality of the projects. Construction should encounter problems in a timely manner with the designer linked to choose both economic and scientific potential solutions，overcome the waste caused by command，to give due attention to the importance of investment in conservation，is responsible for the engineering technician with the combination of economic officers from the tender，contract negotiations，costing the budget，signed paid to the progress of the completion of the accounts，a cost analysis，the whole process management and strictly control the cost of the project.。

工程管理专业外文文献翻译(中英文)【精选文档】

xxxxxx 大学本科毕业设计外文翻译Project Cost Control: the Way it Works项目成本控制：它的工作方式学院（系）: xxxxxxxxxxxx专业: xxxxxxxx学生姓名: xxxxx学号： xxxxxxxxxx指导教师： xxxxxx评阅教师：完成日期：xxxx大学项目成本控制：它的工作方式在最近的一次咨询任务中，我们意识到对于整个项目成本控制体系是如何设置和应用的,仍有一些缺乏理解。

所以我们决定描述它是如何工作的.理论上，项目成本控制不是很难跟随。

首先，建立一组参考基线。

然后，随着工作的深入，监控工作,分析研究结果,预测最终结果并比较参考基准。

如果最终的结果不令人满意，那么你要对正在进行的工作进行必要的调整，并在合适的时间间隔重复。

如果最终的结果确实不符合基线计划，你可能不得不改变计划.更有可能的是，会 (或已经) 有范围变更来改变参考基线，这意味着每次出现这种情况你必须改变基线计划。

但在实践中，项目成本控制要困难得多，通过项目数量无法控制成本也证明了这一点。

正如我们将看到的，它还需要大量的工作，我们不妨从一开始启用它。

所以，要跟随项目成本控制在整个项目的生命周期.同时，我们会利用这一机会来指出几个重要文件的适当的地方。

其中包括商业案例，请求（资本)拨款（执行），工作包和工作分解结构，项目章程（或摘要),项目预算或成本计划、挣值和成本基线。

所有这些有助于提高这个组织的有效地控制项目成本的能力。

业务用例和应用程序（执行）的资金重要的是要注意，当负责的管理者对于项目应如何通过项目生命周期展开有很好的理解时,项目成本控制才是最有效的。

这意味着他们在主要阶段的关键决策点之间行使职责。

他们还必须识别项目风险管理的重要性，至少可以确定并计划阻止最明显的潜在风险事件。

在项目的概念阶段•每个项目始于确定的机会或需要的人.通常是有着重要性和影响力的人,如果项目继续,这个人往往成为项目的赞助。

工程造价英语文献

工程造价英语文献以下是一篇关于工程造价的英文文献：Title: Construction Cost Estimation Techniques: A Review Abstract:Construction cost estimation is a crucial process in the construction industry, as accurate cost estimates are essential for project planning, budgeting, and decision-making. This paper provides a comprehensive review of various construction cost estimation techniques that are commonly used in practice. The review includes traditional methods, such as the unit cost method, the square foot method, and the assembly method, as well as modern methods, such as parametric cost estimation, expert judgement, and statistical analysis. The advantages and limitations of each technique are discussed, along with their applicability to different types of construction projects. The paper also highlights the importance of considering uncertainties and risks in cost estimation, and provides an overview of risk assessment techniques that can be used in conjunction with cost estimation models. The review concludes with recommendations for future research in the field of construction cost estimation.Keywords: construction cost estimation, techniques, traditional methods, modern methods, risk assessmentIntroduction:Construction cost estimation plays a critical role in the success of construction projects. Accurate cost estimates are essential for project planning, budgeting, and decision-making. However, costestimation is a challenging task due to the complexity and uncertainty inherent in construction projects. In recent years, there has been a growing interest in developing and implementing new cost estimation techniques to improve the accuracy and reliability of cost estimates. This paper aims to review the existing literature on construction cost estimation techniques and identify their advantages, limitations, and applicability in different contexts. Methods:A systematic literature review was conducted to identify relevant studies on construction cost estimation techniques. The search was performed using online databases and academic journals. The selected studies were then analyzed and categorized based on the type of construction cost estimation technique they described. Results:The review identified several traditional and modern cost estimation techniques that are commonly used in practice. Traditional methods, such as the unit cost method and the square foot method, are simple and easy to apply, but they may lack accuracy and flexibility. Modern methods, such as parametric cost estimation and expert judgement, take into account more variables and can provide more accurate cost estimates. However, they require more data and expertise. The review also highlighted the importance of considering uncertainties and risks in cost estimation, and described various risk assessment techniques that can be used in conjunction with cost estimation models.Discussion:The review revealed that there is no one-size-fits-all costestimation technique. The choice of technique depends on the characteristics of the construction project, the available data, and the expertise of the estimator. Moreover, there is a need for further research to develop more accurate and reliable cost estimation models, as well as to improve the integration of risk assessment techniques into cost estimation processes.Conclusion:Construction cost estimation is a complex and challenging task. This paper provides a comprehensive review of various cost estimation techniques used in practice and highlights their advantages, limitations, and applicability. The review also emphasizes the importance of considering uncertainties and risks in cost estimation, and suggests areas for future research. By improving the accuracy and reliability of cost estimates, construction professionals can make more informed decisions and ensure the success of construction projects.。

有关介绍工程造价的英语作文

有关介绍工程造价的英语作文Engineering cost refers to the total cost of a construction project, including materials, labor, equipment, and overhead. It is essential for project managers to accurately estimate and control engineering costs to ensure the project stays within budget and is completed on time.There are several key components of engineering cost, including direct costs such as materials and labor,indirect costs such as equipment and utilities, and general overhead costs such as project management and administration. It is important to carefully analyze and estimate each of these costs to develop an accurate budget for the project.One method for estimating engineering costs is to use historical data from similar projects to create a cost model. This can help project managers predict the costs of materials, labor, and other expenses based on the size and scope of the project. Additionally, project managers canuse software tools to create detailed cost estimates and track expenses throughout the project.Controlling engineering costs involves closelymonitoring expenses and making adjustments as needed tostay within budget. This may involve negotiating priceswith suppliers, finding more cost-effective materials or labor, or re-evaluating the project scope to reduce costs. Effective cost control requires regular communication and collaboration with all stakeholders involved in the project.In conclusion, engineering cost is a crucial aspect of construction projects that requires careful estimation, monitoring, and control. By accurately estimating costs, using historical data and cost models, and implementing effective cost control measures, project managers canensure that the project stays within budget and is completed successfully.工程造价是指建筑工程项目的总成本，包括材料、劳动力、设备和间接费用。

工程造价外国文献及译文

工程造价外国文献及译文以下为工程造价相关的外国文献及译文：1. "Engineering Cost Estimation and Control" by Philip E. Kesler and John M. Meredith。

《工程造价估算与控制》（Philip E. Kesler和John M. Meredith 著）。

2. "Cost Engineering for Construction Projects" by Ronald Klemencic。

《建筑工程造价工程》（Ronald Klemencic著）。

3. "Cost Estimating and Analysis for Engineering and Management" by Phillip F. Ostwald。

《工程和管理的成本估算和分析》（Phillip F. Ostwald著）。

4. "Construction Cost Engineering" by Stephen R. Devlen。

《建筑工程造价工程》（Stephen R. Devlen著）。

5. "Project Cost Control in Action" by Kim Heldman and William R. Duncan。

《项目成本控制实践》（Kim Heldman和William R. Duncan著）。

6. "Cost Estimating and Contract Pricing" by Michael D. Dell'Isola。

《成本估算和合同定价》（Michael D. Dell'Isola著）。

7. "Engineering Economics and Economic Design for Process Engineers" by Thane Brown。

Cost management in the engineering project management

工程项目管理中的造价管理Cost management in the engineering project management论文摘要：工程造价控制是工程建设管理工作的重要组成部分，如何合理确定和有效控制工程投资，是工程项目管理的一大难题。

本文系统地分析了工程项目整个过程的造价控制的主要影响因素，并提出了有效的、切实可行的造价管理措施。

Abstract : the project cost control is an important part of project construction management work, how to determine a reasonable and effective control of project investment, is a big problem in the project management. This paper systematically analyzes the main influence factors of cost control of the whole process of engineering project, and proposes effective, feasible cost management measures.论文关键词：工程；项目管理；造价管理Keywords: project; project management;engineering cost management;在工程项目建立和实施过程中，如何有效地利用投入建设工程的人力、物力、财力，以尽量少的劳动和物质消耗，取得较高的经济和社会效益，是工程项目管理中的一个十分重要的问题。

工程造价管理。

工程造价管理的目的不仅在于控制项目投资不超过批准的造价限额，更在于从项目的整体利益出发，合理地使用人力、物力、财力，以取得最大的投资效益。

工程造价专业毕业外文文献、中英对照

工程造价专业毕业外文文献、中英对照中文翻译：工程造价专业毕业外文文献工程造价专业是一种重要的工程技术专业，主要负责工程投资的评估、选择和控制工程项目成本，以及项目质量、进度和安全。

因此，工程造价专业需要具备丰富的知识和技能，包括工程建设、经济学、管理学、数学、统计学等方面。

为了提高工程造价专业学生的综合能力，学习外文文献是不可或缺的步骤。

本文将介绍几篇与工程造价专业相关的外文文献，并提供中英文对照。

1）《The Role of Quantity Surveyors in Sustainable Construction》该文研究了数量调查师在可持续建筑中的作用，并深入探讨了数量调查师在项目的可持续性评估、营建阶段和运营阶段的角色和责任。

该文指出，数量调查师可以通过成本控制、资源利用、和材料选择等方面促进可持续建筑的发展，为未来可持续发展提供支持。

中文翻译：数量调查师在可持续建筑中的作用2）《Cost engineering》该文研究了造价工程的理论和实践，并提供了一系列工具和方法用于项目成本的控制和评估。

该文还深入探讨了工程造价和项目管理之间的关系，并提供了一些实用的案例研究来说明造价工程的实际应用。

中文翻译：造价工程3）《Construction cost management: learning from case studies》该文通过案例分析的方式来探讨建筑项目成本管理的实践。

该文提供了多个案例研究，旨在向读者展示如何运用不同的方法来控制和评估项目成本，并阐述了思考成本问题时需要考虑的多个因素。

中文翻译：建筑项目成本管理：案例学习4）《Project Cost Estimation and Control: A Practical Guide to Construction Management》该书是一本实用指南，详细介绍了在工程起始阶段进行项目成本估算的方法和技巧，以及如何在项目执行阶段进行成本控制。

工程造价外文及翻译

.The Cost of Building Structure1. IntroductionThe art of architectural design was characterized as one of dealingcomprehensively with a complex set of physical and nonphysical designdeterminants. Structural considerations were cast as important physicaldeterminants that should be dealt with in a hierarchical fashion if theyare to have a significant impact on spatial organization and environmentalcontrol design thinking.The economical aspect of building represents a nonphysical structuralconsideration that, in final analysis, must also be considered important.Cost considerations are in certain ways a constraint to creative design.But this need not be so. If something is known of the relationship betweenstructural and constructive design options and their cost of implementation, it is reasonable to believe that creativity can beenhanced. This has been confirmed by the authors' observation that mostenhanced. This has been confirmed by the authors' observation that mostcreative design innovations succeed under competitive bidding and notbecause of unusual owner affluence as the few publicized cases ofextravagance might lead one to believe. One could even say that a designerwho is truly creative will produce architectural excellence within theconstraints of economy. Especially today, we find that there is a needto recognize that elegance and economy can become synonymous concepts.Therefore, in this chapter we will set forth a brief explanation ofthe parameters of cost analysis and the means by which designers mayevaluate the overall economic implications of their structural andarchitectural design thinking.The cost of structure alone can be measured relative to the total costof building construction. Or, since the total construction cost is buta part of a total project cost, one could include additional considerationfor land(10～20percent),finance and interest(100～200percent),taxesand maintenance costs (on the order of20 percent).But a discussion ofthese so-called architectural costs is beyond the scope of this book, andwe will focus on the cost of construction only.文档资料Word.On the average, purely structural costs account for about 25 percentof total construction costs, This is so because it has been traditionalto discriminate between purely structural and other so-called architectural costs of construction. Thus, in tradition we find thatarchitectural costs have been taken to be those that are not necessaryfor the structural strength and physical integrity of a building design.“Essential services” forms a third construction costcategory andrefers to the provision of mechanical and electrical equipment and otherservice systems. On the average, these service costs account for some 15to 30 percent of the total construction cost, depending on the type ofbuilding. Mechanical and electrical refers to the cost ofproviding forair-conditioning equipment and he means on air distribution as well asother services, such as plumbing, communications, and electrical lightand power.The salient point is that this breakdown of costs suggests that, upto now, an average of about 45 to 60 percent of the total cost ofconstructing a typical design solution could be considered asarchitectural. But this picture is rapidly changing. With high interestcosts and a scarcity of capital, client groups are demanding leanerdesigns. Therefore, one may conclude that there are two approaches thedesigner may take towards influencing the construction cost of building.The first approach to cost efficiency is to consider that whereverarchitectural and structural solutions can be achieved simultaneously,a potential for economy is evident. Since current trends indicate areluctance to allocate large portions of a construction budget to purelyarchitectural costs, this approach seems a logical necessity. But, evenwhere money is available, any use of structure to play a basic architectural role will allow the nonstructural budget to be applied tofulfill other architectural needs that might normally have to be appliedto fulfill other architectural needs that might normally have to be cutback. The second approach achieves economy through an integration ofservice and structural subsystems to round out one's effort to producea total architectural solution to a building design problem. The final pricing of a project by the constructor or contractor usually文档资料Word.takes a different form. The costs are broken down into (1) cost ofmaterials brought to the site, (2)cost of labor involved in every phaseof the construction process, (3)cost of equipment purchased or rented forthe project, (4)cost of management and overhead, and(5) profit. Thearchitect or engineer seldom follows such an accurate path but shouldperhaps keep in mind how the actual cost of a structure is finally pricedand made up.Thus, the percent averages stated above are obviously crude, but theycan suffice to introduce the nature of the cost picture. The followingsections will discuss the range of these averages and then proceed to adiscussion of square footage costs and volume-based estimates for use inrough approximation of the cost of building a structural system.2. Percentage EstimatesThe type of building project may indicate the range of percentages thatcan be allocated to structural and other costs. As might be expected,highly decorative or symbolic buildings would normally demand the lowestpercentage of structural costs as compared to total construction cost.In this case the structural costs might drop to 10～15percentof the totalbuilding cost because more money is allocated to the so-called architectural costs. Once again this implies that the symbolic componentsare conceived independent of basic structural requirements. However,where structure and symbolism are more-or-less synthesized, as with achurch or Cathedral, the structural system cost can be expected to besomewhat higher, say, 15and20 percent (or more).At the other end of the cost scale are the very simple and nonsymbolicindustrial buildings, such as warehouses and garages. In these cases, thenonstructural systems, such as interior partition walls and ceilings, aswill as mechanical systems, are normally minimal, as is decoration, andtherefore the structural costs can account for60 to 70 percent, even 80percent of the total cost of construction.Buildings such as medium-rise office and apartmentbuildings(5～10stories)occupy the median position on a cost scale at about 25 percentfor structure. Low and short-span buildings for commerce and housing, say,of three or four stories and with spans of some 20 or 30 ft and simple文档资料Word.erection requirements, will yield structural costs of 15～20 percent oftotal building cost.Special-performance buildings, such as laboratories and hospitals,represent another category. They can require long spans and a more thanaverage portion of the total costs will be allocated to services (i.e.,30～50 percent), with about 20 percent going for the purelystructuralcosts. Tall office building (15 stories or more) and/or long-spanbuildings (say, 50 to 60 ft) can require a higher percentage for structuralcosts (about 30to 35percent of the total construction costs),with about30 to 40 percent allocated to services.In my case, these percentages are typical and can be considered as ameasure of average efficiency in design of buildings. For example, if alow, short-span and nonmonumental building were to be bid at 30 percentfor the structure alone, one could assume that the structural design maybe comparatively uneconomical. On the other hand, the architect shouldbe aware of the confusing fact that economical bids depend on the practicalability of both the designer and the contractor to interpret the designand construction requirements so that a low bid will ensue. Progress instructural design is often limited more by the designer's or contractor'slack of experience, imagination, and absence of communication than bythe idea of the design. If a contractor is uncertain, he will add coststo hedge the risk he will be taking. It is for this reason that both thearchitect and the engineer should be well-versed in the area ofconstruction potentials if innovative designs ate to be competitively bid.At the least the architect must be capable of working closely withimaginative structural engineers, contractors and even fabricatorswherever possible even if the architecture is very ordinary. Efficiencyalways requires knowledge and above all imagination, and these areessential when designs are unfamiliar.The foregoing percentages can be helpful in approximating totalconstruction costs if the assumption is made that structural design isat least of average (of typical) efficiency. For example, if a total officebuilding construction cost budget is ﹩5,000,000,and 25percent is the“standard” to be used for structure, a projected structural system文档资料Word.should cost no more than ﹩1,250,000.If a very efficientdesign wererealized, say, at 80 percent of what would be given by the “average”efficient design estimate stated above the savings,(20 percent),wouldthen be﹩250,000 or 5 percent of total construction costs ﹩5,000,000.Ifthe ﹩5,000,000 figure is committed, then the savings of ﹩250,000 couldbe applied to expand the budget for “other” costs.All this suggests that creative integration of structural (and mechanical and electrical) design with the totalarchitectural designconcept can result in either a reduction in purely construction designconcept can result in either a reduction in purely construction costs ormore architecture for the same cost. Thus, the degree of success possibledepends on knowledge, cleverness, and insightful collaboration of thedesigners and contractors.The above discussion is only meant to give the reader an overall perspective on total construction costs. The following sections will nowfurnish the means for estimating the cost of structure alone. Twoalternative means will be provided for making an approximate structuralcost estimate: one on a square foot of building basis, andanother onvolumes of structural materials used. Such costs can then be used to geta rough idea of total cost by referring to the “standards”for efficientdesign given above. At best, this will be a crude measure, but it is hopedthat the reader will find that it makes him somewhat familiar with thetype of real economic problems that responsible designers must deal with.At the least, this capability will be useful in comparing alternativesystems for the purpose of determining their relative cost efficiency.3. Square-foot EstimatingAs before, it is possible to empirically determine a “standard”per-square-foot cost factor based on the average of costs for similarconstruction at a given place and time. more-or-less efficient designsare possible, depending on the ability of the designer and contractor touse materials and labor efficiently, and vary from the average.The range of square-foot costs for “normal” structural systems is﹩10 to ﹩16 psf. For example, typical office buildings averagebetween﹩12 and ﹩16 psf, and apartment-type structures range from ﹩10 to ﹩文档资料Word.14.In each case, the lower part of the range refers to short spans andlow buildings, whereas the upper portion refers to longer spans andmoderately tall buildings.Ordinary industrial structures are simple and normallyproducesquare-foot costs ranging from ﹩10 to ﹩14,as with the moretypicalapartment building. Although the spans for industrial structures aregenerally longer than those for apartment buildings, and the loads heavier,they commonly have fewer complexities as well as fewer interior walls,partitions, ceiling requirements, and they are not tall. In other words,simplicity of design and erection can offset the additional cost forlonger span lengths and heavier loads in industrial buildings. Of course there are exceptions to these averages. The limits ofvariation depend on a system's complexity, span length over “normal”and special loading or foundation conditions. For example, the CrownZellerbach high-rise bank and office building in San Francisco isan exception, since its structural costs were unusually high. However,in this case, the use of 60 ft steel spans and free-standing columns atthe bottom, which carry the considerable earthquake loading, as well asthe special foundation associated with the poor San Francisco soilconditions, contributed to the exceptionally high costs. The design wasalso unusual for its time and a decision had been made to allow higherthan normal costs for all aspects of the building to achieve open spacesand for both function and symbolic reasons. Hence the proportion ofstructural to total cost probably remained similar to ordinary buildings.The effect of spans longer than normal can be further illustrated. The“usual” floor span range is as follows: for apartmentbuildings,16 to25 ft; for office buildings,20 to 30 ft; for industrial buildings,25 to30 ft loaded heavily at 200 to 300 psf; and garage-type structures span,50to 60 ft, carrying relatively light(50～75 psf) loads(i.e.,similar tothose for apartment and office structures).where these spans are doubled,the structural costs can be expected to rise about 20 to 30 percent.To increased loading in the case of industrial buildings offers anotherinsight into the dependency of cost estimates on “usual”standards. Ifthe loading in an industrial building were to be increased to 500psf(i.e.,文档资料Word.two or three times), the additional structural cost would be on the orderof another 20 to 30 percent.The reference in the above cases is for floor systems. For roofs usingefficient orthotropic (flat) systems, contemporary limits for economicaldesign appear to be on the order of 150 ft, whether of steel or prestressedconcrete. Although space- frames are often used for steel orprestressed concrete. Although space-frames are often used for steelspans over 150 ft the fabrication costs begin to raise considerably.At any rate, it should be recognized that very long-span subsystems arespecial cases and can in themselves have a great or small effect on isadded, structural costs for special buildings can vary greatly from designto design. The more special the form, themore that design knowledge andcreativity, as well as construction skill, will determine the potentialfor achieving cost efficiency.4. Volume-Based EstimatesWhen more accuracy is desired, estimates of costs can be based on thevolume of materials used to do a job. At first glance it might seem thatthe architect would be ill equipped to estimate the volume of materialrequired in construction with any accuracy, and much less speed. But itis possible, with a moderate learning effort, to achieve some capabilityfor making such estimates.Volume-based estimates are given by assigning in-place value to thepounds or tons of steel, or the cubic yards of reinforced or prestressedconcrete required to build a structural system. For such a preliminaryestimate, one does not need to itemize detailed costs. For example,in-place concrete costs include the cost of forming, falsework,reinforcing steel, labor, and overhead. Steel includes fabrication anderection of components.Costs of structural steel as measured by weight range from ﹩0.50 to﹩0.70 per pound in place for building construction. Forlow-risebuildings, one can use stock wide-flange structural members that requireminimum fabrication, and the cost could be as bow as ﹩0.50per pound.More complicated systems requiring much cutting andwelding(such as acomplicated steel truss or space-frame design) can go to ﹩0.70 per pound文档资料Word.and beyond. For standard tall building designs (say, exceeding 20stories),there would typically be about 20 to 30 pounds of steel/psf,which one should wish not to exceed. A design calling for under 20 psfwould require a great deal of ingenuity and the careful integration ofstructural and architectural components and would be a real accomplishment.Concrete costs are volumetric and should range from anin-place lowof ﹩150 per cu yd for very simple reinforced concrete work to ﹩300 percu yd for expensive small quantity precast and prestressed work. Thislarge range is due to the fact that the contributing variables are morecomplicated, depending upon the shape of the precise components, theerection problems, and the total quantity produced.Form work is generally the controlling factor for anycast-in-placeconcrete work. Therefore, to achieve a cost of ﹩150 per cuyd, only thesimplest of systems can be used, such as flat slabs that require littlecutting and much reuse of forms. Where any beams are introduced thatrequire special forms and difficulty in placement of concrete and steelbars, the range begins at ﹩180 per cu yd and goes up to ﹩300.Since, ina developed country, high labor costs account for high forming costs, thisresults in pressure to use the simplest and most repetitive of systemsto keep costs down. It become rewarding to consider the possibility ofmass-produced precast and prestressed components, which may bring asaving in costs and\or construction completion time. The latter resultsin savings due to lower construction financing costs for the contractorplus quicker earnings for the owner.To summarize, the range of cost per cubic yard of standard types ofpoured-in-place concrete work will average from $150 to $250, the minimumbeing for simple reinforced work and the maximum for moderatelycomplicated post tensioned work. This range is large and any estimate thatignores the effect of variables above will be commensurately inaccurate.5.SummaryThe estimate and economical design of structure building are importantand essential work, which should be valued by all architects and engineersand others. Better you do it, more profit you will receive from it!文档资料Word.建筑结构的成本1.前言众所周知，建筑物的结构设计是一个相当复杂的过程，其中既包含处理很多物质因素，又考虑诸多非物质方面的因素。

工程造价管理中英文对照外文翻译文献

中英文对照外文翻译(文档含英文原文和中文翻译)The significance of control construction costs manages on entireprocessFirst, The necessary of control construction costs manages on entire process Talk about the management and the control on construction costs, that the field we are just accustomed to is thought of is a project advance in final account. Indeed , right away at present system and reality,what the job of that the management and the control on construction costs is advance in final account. Be that in advance, the people who work on final account according that already be ascertaied of the working drawing to calculate project amounts，apply a quota mechanically, the meter mechanically fetching cost, or designing that according to the drawing sheet and construction organization after construction is over as well as the scene construction visa takes notes weaves the final account being completed. This is necessary , useful no doubt. But we must see that when pre-final accounts personnel weave working drawing budget or the final account being completed, the construction plan and thedesign paper already determined. But construction being to take according to picture as principle, so then in advance, job done by final account personnel is only the change secretly scheming against cost produced by design alteration and prevents upvaluation from calculating boldly. But suppose the project is unreasonable on economy, there is a fault in decision-making; suppose designing a scheme feasible or be not optimum on the technology; the final account personnel can do nothing for sb then in advance. Job of final account personnel does accounts in advance only under just saying system currently in effect, after the event , can only reflect already complete project amounts inactively , can only reflect design and be under construction passively. This evidently is single-faceted , insufficient , we must carry out the entire proceeding supervisory control on the construction costs of building a project.Concrete conditions of union our country, cost of construction manages have problems as follows:1、Be not enough to take investment decision into the stage of construction costs seriously charge indeed.Investment decision is to produce the construction costs headstream, This one stage blow the expense at take up the total investment forehead about 0.5%～3%,but that can have an effect to raise the project benefit of investment. That the project carries out rational choice on construction is that resource carries out direct , the most important optimization deploy means on economy , project benefit of investment affects efficiency and beneficial result to entire national economy. The developed country charges attach importance to control on investment decision stage construction costs,and costs not stinting big capital of money making the studies on the stage of carrying out investment decision energetically, make relatively comparatively accurate construction costs , go along the controlFor a long time, there is the grave phenomenon investing in swelling in engineering construction of our country,bring the limit for a project feeling longer and longer, construction costs is higher and higher. The cause of that is short of the effective basis of the building of earlier stage ascertaining construction costs, only basis the already completed according to the expert , decision-makers draw lessons to estimate the project construction costs. Because a lot of factor effects, the“three surpass " phenomenon very common, there are main cause as follows:(1) personal factor brings about rough estimate lessening(2) equipment composes in reply material price's not working out according to market quotations.(3) construction units bring forward the too high for exceeding a design criterion 2、The design stage of construction costs is not under the control of strictThe design stage is the faucet in that project construction costs controls. After the investment decision is be made rationally , that is the process of plan the technology and organic together economly . Effective control the cost of construction requires strictly and all-round in the enginee designing . Engineering design of current our country also puts move bidding system , fair competition into practice , cost of construction looks on control engineering effective to design stage as one of thestandard choosing main part being hit by the bid unit , cost of construction carries out the administration controlling on the entire proceeding .Our country major part design that the unit carries out thorough analysis lack on construction project technology and economy , big multiple technologies make light of economy in design but at present , design that the personnel is responsible seemingly only to design project mass , are concerned with the construction costs height not very. Optimize a design plan to such an extent as having no way to pass, the first step designs , the rough estimate gets to the effect controlling general cost of construction's establishment. Mass and depth that engineering design pursues etc. is also insufficient , amounts project mistakes in amounts project detailed lists calculates , misses and not calculating, can't arouse increasing by estimating a project momentary, the mass making a tender work is difficult to ensure that , have no way to have an effect to control construction costs asa result also.3、Has not adopt the amounts project detailed list quoted price way being applied or used universally on the international all roundAdopt the amounts project detailed list quoted price way being put into use commonly on the international , is that our country construction costs system reforms and cause the inevitable trend reforming to bid system in invitation to bid tender.One of important act carrying out project public bidding system being to build socialist market economy and to perfect construction market operating mechanism in construction field. After the construction project tender is carried out all round in our country, the effect is obvious in the respect of shortening the mass building a time limit for a project , ensuring a project , reducing construction costs , boycotting an unhealthy tendency. Have ensured the invitation to bid people and bidder's lawful rights and interests also effectively. With the socialist market economy uninterrupted growth,the original tender stage puts the budget quota valuation pattern into practice already doing not adapting , adopt the amounts project detailed list quoted price way being put into use commonly on the international to carry out a tender is an inevitable trend. Ministry of Construction has issued amounts project detailed list valuation method , amounts project detailed list valuation has been in construction project tender job , person has provided project quantity from invitation to bid according to national unification project amounts calculation regulation , quoted price, and classics have judged the reason bidder autonomously trying the at a low price middle bid construction costs valuation pattern.That carrying out amounts project detailed list valuation method is one important measure of item of construction costs deepen the reform, is standard tender behavior effective measure. This method is beneficial to changing over taking that "amounts" ", "price" are "quota-consuming" as dominant static state managing a pattern , make project amounts in detailed list not enter competition, competition being confined to price only; Beneficial to rightness appraises enterprise strength; Project mass beneficial to ensuring that, reduces construction costs; May cut down the physical labour complicated and overloaded repeating the amounts calculating a project; Facilitate the tender quoted price job; Argue with the dispute back and forth in cutting down project settlement; Receive a track step by step with the convention "controllingamounts , guiding price , competing for a fee's on" the international, deepen the reformation that project valuation manages mainly according to the marketplace changes development, taking one's place on the international market for our country contracts business creates condition.4、The stage being under construction controls lack to construction costsWant to have strict control design alteration too in the stage being under construction. Guard the pass though that working drawing appears in joint trial or are able to have all sorts of problems, but call for to design a branch in the process of construction hard to avoid is strict out of the construction works complexity, the situation changing after avoiding doing first, is also that the weight avoiding break a rough estimate , effective control engineering of construction costs cost of construction plays with a link. At the same time, the sharpening contract manages , ensures equality and mutual benefit issuing contract of method and contracting method.5、The construction costs being completed settling a stage's controls a project inefficientlyThat the final account being completed is that entire construction costs is under the control of the most important one is encircled by construction works. How the final account being completed can reflect actual entire project cost of construction honestly , have also reflected the ability issuing contract of method and contracting method to construction costs administration , have finished handling a project in time the final account being completed must collect , arrange settling a data , pursuing , designing the certificate material changing notice , various warning including that the project is completed and so on being completed. These data collecting must pay attention to whose validity with obtaining evidence, specimen seal impression having designing personnel's signature and being related to if the design alteration advice note must be made known to lower levels by plain design organ. Scene inspection and control visa must label seal and the ratification going on a punitive expedition to such that designing a personnel etc. having construction site person in charge of first party. Great majority our country construction projects are completed in the project being under construction when the final account, during the period of the final account being completed contracting method , are are under construction contracting method calculating commonly much in the book being completed winding up an account , are issue contract of haggie just inexhaustible in devices and schemes , are dispute over trifles phenomenon is grave , project settlement drags repeatedly , some confirmation having drug once and , greatly, affecting engineering construction project sigmatism and building construction costs.A construction project includes the following procedure from brewing , planning , designing that to establishing completion and commissioning: Be that the project letter of advice stage , feasibility appraise the stage , design stage , the stage being under construction , acceptance check stage and the queen being completed estimate that.Correspondingly, the construction costs ascertaining that and the project construction phase job look at and appraise the stage adapting to , several being allotted in general for the following: The investment studying stage establishment inthe project letter of advice and feasibility is estimated, design stage establishment designs a rough estimate in the first step, budget designing that the stage weaves working drawing in working drawing, budget builds ampere of construction costs face to face with working drawing for basis tender project engineering contract, price is also that the form ascertains that with the business contract; Project amounts putting stage into practice being going to be completed according to contracting reality in project, takes contract price as basis , considers cost of construction rise aroused by inflation of prices at the same time , considers the project and cost being difficult to estimate that to designing middle but happening in putting stage reality into practice , the example is ascertained estimating price; All-in cost costing in the reality being completed checking and accepting a stage , assembling into engineering construction process middle all round, weaves the final account being completed , embodies the actual cost of construction that a construction project according to the facts."Four guess that two-valence "is interrelated , the former restricts the latter , the latter supplements the former.What is called, build the construction costs administration and control, it is the occurrence contracting the stage and construction in the investment decision stage , design stage , construction project putting stage into practice with construction construction costs to control within the cost of construction quota O. K. , correcting the deviation happening at any time, to ensure that the project manages the target realization , get fairly good benefit of investment and social benefits in an attempt being able to use manpower and material resources, financial resources rationally in building a project one by one.Second, the importance of the investment decision-making stage of project cost controlConstruction projects in the investment decision-making stage, the project of the techno-economic decision-making, as well as the cost of construction projects completed and put into production after the project cost-effective, have a decisive impact on the construction project cost control is an important stage. Project cost management as a decision-making stage in the feasibility study report shall be prepared, and economic evaluation of the proposed project, select the technically feasible and economically the construction of example programs and to optimize the construction program on the basis of the preparation of high-quality items investment is estimated that the project construction so that the real control of the project has played the role of total investment.The impact of the decision-making phase of the project cost are the main factors: a, the determine level of construction standards; b, the choice of built-up areas; c, building location (site) selection; d, project the economic scale; e, technology selection f, equipment selection .Such as the choice of built-up areas, there is a basic principle, that is close to raw materials, fuel and consumer principles. This project completed and put into production, you can avoid the raw materials, fuels, and finished the long-haul transport, reduce costs, lower costs; transportation distance may be shortened to reduce the flow of time, speed up cash flow and is conducive to business. If theproject's economic size, economies of scale, product standard is a reasonable means of production volume, a number of products under certain conditions, was "increasing returns" of economic phenomena, that is, with the expansion of production volume, unit cost reduction, revenue increase.Therefore, in order to phase in the investment decision-making control over project cost effective, we must do a good job in the following areas:(1) the implementation of construction project legal person responsibility system, the construction project from planning to implementation of the whole process of the use of funds and repayment responsibilities to people and projects at the same time establish a system of matching corporate oversight mechanisms, by the competent authorities and supervision of the industry sector establishment of a monitoring group to oversee the use of project funds.(2) to conduct market analysis and seeking truth from facts, to avoid the blindness of the project decision-making, reduce risk and lower investment, give full consideration to construction projects in the future competitiveness of the market so that more scientific book design and reliability(3) Capital financial capital must be committed to a formal document, investment funds must be put in place the parties, there must be a funding document to ensure that projects are implemented on schedule after approval. Conditions of the loans should be carefully analyzed and compared to minimize the interest burden and repayment pressure.(4) Strengthening of engineering geology, hydrogeology, as well as land, water, electricity, transport, environmental protection projects such as the work of the depth of the external conditions, so that there is sufficient basis to estimate the investment. At the same time, extensive research should be to compare similar projects, a serious functional analysis, comparison and choice of multi-program, a full-scale technical feasibility studies and economic evaluation, the finalization of technologically advanced, reliable, economical and rational project construction program in order to estimate more accurate and realistic estimate of the amount of investment in order to make the project cost from the start position in a more reasonable level.Third, the design phase of the importance of project cost controlMake investment decisions in the project, the project cost control is the key to the design. Design is in the technical and economic implementation of the proposed project to conduct a comprehensive arrangement, is also planning the construction process. Technologically advanced, economical and rational design can reduce the project construction period, savings investment, to improve efficiency. According to expert analysis, design fee generally equal to the construction of the project life-cycle cost of less than 1%, which costs less than 1% of project cost accounts for the impact of degrees above 75%. Because of the general construction projects, selection of materials and equipment accounted for more than 50% of the cost of the project, and in the design phase of architectural forms, structural type, the selection of equipment and materials have been identified in the construction of post-implementation phase, the impact of the project cost a small (10 % or less). This shows that the design quality is crucial to the entire projectThe same construction project, the same single unit of work can have different programs, which have different costs, it is therefore necessary to meet the function under the premise of doing a number of options, through technical comparison, economic analysis and efficiency evaluation, selection of technology selection into the application of economic and rational design, that is, the process of design optimization. Often used to optimize the design of the program, also known as the value of value engineering analysis, that is, as far as possible in meeting the functionality or improve the function of the premise, as far as possible to reduce costs.Occurred in the cost of all parts of the application of value engineering, construction investment will require a lot of people, financial, and material, and thus the value of engineering construction works great. For a rather mature and effective management methods, value engineering in a number of works have been widely used in construction.In the engineering design phase correctly handle the technical and economic relationship between the unity of opposites, we can control the key to investment, design and cost management must work closely with staff to make a lot of the technical and economic comparison, in the reduction and control of project efforts, engineering Cost management in the design process should be timely investment analysis on the comparison, the cost of information feedback and dynamic impact on the design, in order to ensure effective control over investment.At the design stage to project cost control should focus on the following aspects.(1) to promote the design and the design of the bidding campaign optimization design approachThe assessment team of experts using scientific methods, in accordance with applicable, economic, aesthetic principles, as well as technologically advanced, well-structured to meet the building energy saving and environmental requirements, a comprehensive assessment of the merits of design, selection of the best in determining the successful program. Estimates of selected investment program in general to be close to the scope of construction projects. The design of these two methods both contract design choice and competition, to ensure selection of the design of technologically advanced, innovative and unique, adaptable, and help control project cost. Design units should strive to improve their own quality, clever engineering design ideas, great care, in order to reduce the project cost more than their brains in order to improve design quality, and strive to put at the design stage in the approval of project cost control within the investment limits.(2) actively pursuing the design limitThe so-called cap design, is in accordance with the approved design of the book and investment is estimated that in the guarantee under the premise of the functional requirements. Preliminary design and budget control, in accordance with the approved budget for the preliminary design and total control of the construction design. Through the ceiling design, every professional, every designer has a target investment limit. During the design process, designers should be more into the program to compare and optimize the design, Not only to ensure that technically advanced and reasonable design, innovative aesthetics, but also the investment limit is not exceededthe target in order to put an end to the design of the project to raise the factor of safety and design standards, or only consider the feasibility of technical solutions, rather than the phenomenon of economic rationality to ensure effective cost control.(3) the implementation of the design of reward and punishment systemIn order to limit the design of the implementation into practice, the limit should be set up and sound system designed to reward and punishment. To limit the design is done well, cost savings and control of investment there is the effectiveness of the project legal person should be given appropriate incentives and design units. Design to limit the development of the internal design of assessment and incentive methods to limit attention to the design, made to save investment and effective cost control offices and the significant achievements of individuals, should be rewarding. Do not attach importance to limit the design, do not take measures to save the investment, resulting in more than a design limit investment offices and individuals should be given to economic penalties. Do reward and encourage designers to design deep potential economic importance to design the control of a reasonable project cost will be a major breakthrough.Fourth、the cost control of the implementation phase of construction project1, the bidding process stageThe implementation of construction project bidding is effective means of construction projects to control the implementation phase of the project cost. If we want To do a good job for bidding, the first we should make sure that qualification is clearance, and resolutely put an end to bribery, such as all the Phenomenon about destruction of all bidding discipline; Secondly, we should strengthen the bid management, to ensure the accuracy and confidentiality of bid preparation; Third, make sure the method of Evaluation and Calibration are Scientific .when select the successful projects as a standard we should concern about the reasonable, short period, reputable companies, construction considerations such as experience. when we evaluation, the first is technical standard assessment, the follow is business assessment,this can ensure open, fair and just.2, the construction phaseIn the construction phase construction ,the goles based on project budget or contract price of Civil works and installation works and project cost control of Civil works and installation works. At this stage the scope for savings has been small, but it is likely to lead to waste,this make us give them adequate attention for the control of project cost.(1) strengthen the technical and economic comparison of construction programConstruction is an important work of the design of constructing orgnization. Reasonable constructing program can shorten the period of constructing, ensure the quality of the project and enhance economic efficiency. Comparing and analysing the constructing program from technical and economic view and comparing the three techno-economic index of the quality, duration and cost through qualitative analysis and quantitative analysis can take good use of manpower, material and financial resources, achieving better economic benefits. Consequently, good construction management is an important way of all-round cost management.(2) a sound system design change Examination and approval systemIf design subject need to be change, we should take action as far as possible in advance, because the sooner the change, the smaller loss; Second, before each design ofchanges we must analysis the quality of project and cost, and this should receive the consent of the original design. If it breakthrough the total project cost estimates after the change, this must be approved by the review of the relevant departments, we should prevent these things happened such as increasing design elements ,improving the design standards, increasing the project cost.(3) check strictly with visa procedures of the project site we should Construct project management system , establish the specialized departments,and through the use of specialized management of professionals for the project, to avoid the phenomenon that project management staff just care visa only, take no concern about the economic accounts, resulting the serious consequences such as investment is out of control.For Seriously changes of visa procedures we should make the building side, supervision side, the construction site together representatives signed a manner to ensure that the authenticity of the visa, the rationality of the economy of changes and to avoid the disputes caused by the phenomenon of fraud.(4) do a good job in the completion of the audit settlement priceClearing refers to the completion of construction enterprises in accordance with the terms of the contract completed by the contractor within the engineering, land quality experience, and in accordance with the contract, the construction units to carry out the final project settlement price. Completion of the project audited settlement is approved in accordance with the construction of the project cost. Therefore, the completion of settlement of the audit is a very important work, should focus on the following:① check the accuracy of the project quantity.the check of project Quantity is the most important and most complicated, the most detailed work in process of the settle of completed project, this must be based on completion of the project plan, changed design and construction of the scene .it strictly in accordance with the provisions of the rules one by one in terms of project review to prevent the units of construction to increase the volume of inflated project cost in the settlement on completion of the project.② examine whether the additional apply is right . check the sub-projects listed in the price in line with the fixed unit price, check whether the name, specification, measurement units and the content consistent with the units of the valuation table; for the unit price of conversion, the first step is to check if the conversion price was fixed allowed, followed check if the conversion price is correct.③ check if the standards for the admission fee In line with the cost of the fixed and the cost of policies and regulations of the project during the construction.Fifth, the thinking and outlook of project cost management system From a long time, we generally ignore the the project cost control of preparatory work for the construction phase, and control projects often focus on the cost of the construction phase - the budget review working drawings and reasonable settlement。

浅谈专业工程造价与成本控制管理中英文翻译

浅谈专业工程造价与成本控制管理中英文翻译Introduction to professional engineering cost and cost control management in both Chinese and English translation摘要：市政工程建设与工业工程建设一样，按照国家主管部门的统一规定，将一项建设工程划分为建设项目、单项工程、单位工程、分部工程、分项工程五个等级。

控制与管理市政工程造价的成本关系着一个项目的收益其重要性不言而喻。

本文先谈谈造成市政工程造价成本控制困难的原因，接着提出一套解决性措施，希望能对同行有所启发。

Abstract: the municipal engineering construction and industrial construction projects, in accordance with the unity of the competent department of the state regulations to divide a construction project for the construction project, single items of projects, unit projects, divisions, subdivisional work five grades. Cost control and management of municipal construction cost of the relationship between its importance is self-evident. The profitability of a project This article talk about the causes of difficult control of municipal engineering cost, and then puts forward a set of measures to solve, hope to inspire peers.关键词：市政工程工程造价成本控制管理策略Keywords: municipal engineering cost control of construction cost management strategy一、引言One, the introduction市政工程建设与工业工程建设一样，按照国家主管部门的统一规定，将一项建设工程划分为建设项目、单项工程、单位工程、分部工程、分项工程五个等级。

(完整版)工程造价外文及翻译

The Cost of Building Structure1. IntroductionThe art of architectural design was characterized as one of dealing comprehensively with a complex set of physical and nonphysical design determinants。

Structural considerations were cast as important physical determinants that should be dealt with in a hierarchical fashion if they are to have a significant impact on spatial organization and environmental control design thinking.The economical aspect of building represents a nonphysical structural consideration that, in final analysis， must also be considered important。

Cost considerations are in certain ways a constraint to creative design。

But this need not be so。

If something is known of the relationship between structural and constructive design options and their cost of implementation, it is reasonable to believe that creativity can be enhanced. This has been confirmed by the authors’observation that most enhanced. This has been confirmed by the authors’ observation that most creative design innovations succeed under competitive bidding and not because of unusual owner affluence as the few publicized cases of extravagance might lead one to believe。

工程造价论文中英文资料对照外文翻译

工程造价论文中英文资料对照外文翻译Risk Analysis of the International Construction ProjectABSTRACTThis analysis used a case study methodology to analyse the issues surrounding the partial collapse of the roof of a building housing the headquarters of the Standards Association of Zimbabwe (SAZ). In particular, it examined the prior roles played by the team of construction professionals. The analysis revealed that the SAZ’s traditional construction project was generally characterized by high risk. There was a clear indication of the failure of a contractor and architects in preventing and/or mitigating potential construction problems as alleged by the plaintiff. It was reasonable to conclude that between them the defects should have been detected earlier and rectified in good time before the partial roof failure. It appeared justified for the plaintiff to have brought a negligence claim against both the contractor and the architects. The risk analysis facilitated, through its multi-dimensional approach to a critical examination of a construction problem, the identification of an effective risk management strategy for future construction projects. It further served to emphasize the point that clients are becoming more demanding, more discerning, and less willing to accept risk without recompense. Clients do not want surprise, and are more likely to engage in litigation when things go wrong.KEY WORDS:Arbitration, claims, construction, contracts, litigation, project and risk The structural design of the reinforced concrete elements was done by consulting engineers Knight Piesold (KP). Quantity surveying services were provided by Hawkins, Leshnick & Bath (HLB). The contract was awarded to Central African Building Corporation (CABCO) who was also responsible for the provision of a specialist roof structure using patented “gang nail” roof trusses. The building construction proceeded to completion and was handed over to the owners on Sept. 12, 1991. The SAZ took effective occupation of the headquarters building without a certificate of occupation. Also, the defects liability period was only three months .The roof structure was in place 10 years before partial failure in December 1999. The building insurance coverage did not cover enough, the City of Harare, a government municipality, issued the certificate of occupation 10 years after occupation, and after partial collapse of the roof .At first the SAZ decided to go to arbitration, but this failed to yield an immediate solution. The SAZ then decided to proceed to litigate in court and to bring a negligence claim against CABCO. The preparation for arbitration was reused for litigation. The SAZ’s quantified losses stood at approximately $ 6 million in Zimbabwe dollars (US $1.2m) .After all parties had examined the facts and evidence before them, it became clear that there was a great probability that the courts might rule that both the architects and the contractor were liable. It was at this stage that the defendants’ lawyers requested that the matter be settled out of court. The plaintiff agreed to this suggestion, with the terms of the settlement kept confidential .The aim of this critical analysis was to analyse the issues surrounding the partial collapse of the roof of the building housing the HQ of Standard Association of Zimbabwe. It examined the prior roles played by the project management function and construction professionals in preventing/mitigating potential construction problems. It further assessed the extent to which the employer/client and parties to a construction contract are able to recover damages under that contract. The main objective of this critical analysis was to identify an effective risk management strategy for future construction projects. The importance of this study is its multidimensional examination approach.Experience suggests that participants in a project are well able to identify risks based on their own experience. The adoption of a risk management approach, based solely in past experience and dependant on judgement, may work reasonably well in a stable low risk environment. It is unlikely to be effective where there is a change. This is because change requires the extrapolation of past experience, which could be misleading. All construction projects are prototypes to some extent and imply change. Change in the construction industry itself suggests that past experience is unlikely tobe sufficient on its own. A structured approach is required. Such a structure can not and must not replace the experience and expertise of the participant. Rather, it brings additional benefits that assist to clarify objectives, identify the nature of the uncertainties, introduces effective communication systems, improves decision-making, introduces effective risk control measures, protects the project objectives and provides knowledge of the risk history .Construction professionals need to know how to balance the contingencies of risk with their specific contractual, financial, operational and organizational requirements. Many construction professionals look at risks in dividually with a myopic lens and do not realize the potential impact that other associated risks may have on their business operations. Using a holistic risk management approach will enable a firm to identify all of the organization’s business risks. This wi ll increase the probability of risk mitigation, with the ultimate goal of total risk elimination .Recommended key construction and risk management strategies for future construction projects have been considered and their explanation follows. J.W. Hinchey stated that there is and can be no ‘best practice’ standard for risk allocation on a high-profile project or for that matter, any project. He said, instead, successful risk management is a mind-set and a process. According to Hinchey, the ideal mind-set is for the parties and their representatives to, first, be intentional about identifying project risks and then to proceed to develop a systematic and comprehensive process for avoiding, mitigating, managing and finally allocating, by contract, those risks in optimum ways for the particular project. This process is said to necessarily begin as a science and ends as an art .According to D. Atkinson, whether contractor, consultant or promoter, the right team needs to be assembled with the relevant multi-disciplinary experience of that particular type of project and its location. This is said to be necessary not only to allow alternative responses to be explored. But also to ensure that the right questions are asked and the major risks identified. Heads of sources of risk are said to be a convenient way of providing a structure for identifying risks to completion of a participant’s part of the project. Effective risk management is said to require amulti-disciplinary approach. Inevitably risk management requires examination of engineering, legal and insurance related solutions .It is stated that the use of analytical techniques based on a statistical approach could be of enormous use in decision making . Many of these techniques are said to be relevant to estimation of the consequences of risk events, and not how allocation of risk is to be achieved. In addition, at the present stage of the development of risk management, Atkinson states that it must be recognized that major decisions will be made that can not be based solely on mathematical analysis. The complexity of construction projects means that the project definition in terms of both physical form and organizational structure will be based on consideration of only a relatively small number of risks . This is said to then allow a general structured approach that can be applied to any construction project to increase the awareness of participants .The new, simplified Construction Design and Management Regulations (CDM Regulations) which came in to force in the UK in April 2007, revised and brought together the existing CDM 1994 and the Construction Health Safety and Welfare (CHSW) Regulations 1996, into a single regulatory package.The new CDM regulations offer an opportunity for a step change in health and safety performance and are used to reemphasize the health, safety and broader business benefits of a well-managed and co-ordinated approach to the management of health and safety in construction. I believe that the development of these skills is imperative to provide the client with the most effective services available, delivering the best value project possible.Construction Management at Risk (CM at Risk), similar to established private sector methods of construction contracting, is gaining popularity in the public sector. It is a process that allows a client to select a construction manager (CM) based on qualifications; make the CM a member of a collaborative project team; centralize responsibility for construction under a single contract; obtain a bonded guaranteed maximum price; produce a more manageable, predictable project; save time and money; and reduce risk for the client, the architect and the CM.CM at Risk, a more professional approach to construction, is taking its place along with design-build, bridging and the more traditional process of design-bid-build as an established method of project delivery.The AE can review the CM’s approach to the work, making helpful recommendations. The CM is allowed to take bids or proposals from subcontractors during completion of contract documents, prior to the guaranteed maximum price (GMP), which reduces the CM’s risk and provides useful input to design. The procedure is more methodical, manageable, predictable and less risky for all.The procurement of construction is also more business-like. Each trade contractor has a fair shot at being the low bidder without fear of bid shopping. Each must deliver the best to get the projec. Competition in the community is more equitable: all subcontractors have a fair shot at the work .A contingency within the GMP covers unexpected but justifiable costs, and a contingency above the GMP allows for client changes. As long as the subcontractors are within the GMP they are reimbursed to the CM, so the CM represents the client in negotiating inevitable changes with subcontractors.There can be similar problems where each party in a project is separately insured. For this reason a move towards project insurance is recommended. The traditional approach reinforces adversarial attitudes, and even provides incentives for people to overlook or conceal risks in an attempt to avoid or transfer responsibility.A contingency within the GMP covers unexpected but justifiable costs, and a contingency above the GMP allows for client changes. As long as the subcontractors are within the GMP they are reimbursed to the CM, so the CM represents the client in negotiating inevitable changes with subcontractors.There can be similar problems where each party in a project is separately insured. For this reason a move towards project insurance is recommended. The traditional approach reinforces adversarial attitudes, and even provides incentives for people to overlook or conceal risks in an attempt to avoid or transfer responsibility.It was reasonable to assume that between them the defects should have been detected earlier and rectified in good time before the partial roof failure. It did appearjustified for the plaintiff to have brought a negligence claim against both the contractor and the architects.In many projects clients do not understand the importance of their role in facilitating cooperation and coordination; the design is prepared without discussion between designers, manufacturers, suppliers and contractors. This means that the designer can not take advantage of suppliers’ or contractors’ knowledge of build ability or maintenance requirements and the impact these have on sustainability, the total cost of ownership or health and safety .This risk analysis was able to facilitate, through its multi-dimensional approach to a critical examination of a construction problem, the identification of an effective risk management strategy for future construction projects. This work also served to emphasize the point that clients are becoming more demanding, more discerning, and less willing to accept risk without recompense. They do not want surprises, and are more likely to engage in litigation when things go wrong.国际建设工程风险分析摘要此次分析用实例研究方法分析津巴布韦标准协会总部（SAZ）的屋顶部分坍塌的问题。

(完整)工程造价专业外文文献翻译(中英文对照

外文文献：Project Cost Control： The Way it WorksBy R. Max WidemanIn a recent consulting assignment we realized that there was some lack of understanding of the whole system of project cost control, how it is setup and applied. So we decided to write up a description of how it works。

Project cost control is not that difficult to follow in theory.First you establish a set of reference baselines. Then, as work progresses, you monitor the work， analyze the findings， forecast the end results and compare those with the reference baselines. If the end results are not satisfactory then you make adjustments as necessary to the work in progress, and repeat the cycle at suitable intervals。

If the end results get really out of line with the baseline plan, you may have to change the plan。

More likely， there will be （or have been） scope changes that change the reference baselines which means that every time that happens you have to change the baseline plan anyway。

工程造价工程变更毕业论文中英文资料外文翻译文献

工程变更中英文资料外文翻译文献Highway engineering change reasonanalysis and cost of the project of influenceAbstract: in the implementation stage because of highway engineering design factors, environmental factors, the influence of various engineering changes happened is more common, combining with engineering practice, this paper discusses the causes and engineering change of project cost.Keywords: engineering change, Reason, CostDue to the highway project period, long, long line, so broad in construction of various causes by the engineering change is inevitable. Engineering change could lead to increase of construction cost or time limit of the owner and the contractor, between the claim will claim and the cost of the project.Owner of change and the causes of the costAnd when the owner change engineering bidding of construction conditions of commitment. "SanTongYiPing" referred to in the preceding paragraph, the engineering tight finish, delay purpose will increase the contractor's settlement fee, but little impact on total cost, the owner or project quantity change projects. Increase the project content or quantity, will increase the cost, Project content or cancel or reduce the number will reduce cost, but may affect the use function of engineering, because the owner with agreements for the existence of incomplete, or in the contract when division, can increase content of missing the contract cost, and the owners' requirements, and shorten delivery of finished ahead of the original contract period, invest more in construction unitcost of manpower and material resources, to increase, and improve the design standard requirement owner, beautiful Angle from security requirements of engineering structure change type, elevation, baseline, location, size and strength, make cost increase, and the owner to change in the construction organization design has approved the construction plan, cost increase, and the owner of the contract with the owner of the materials or equipment supply for the category and quantity, cause cost increase or decrease, and the owner of the contract specifies unreasonable, can make the cost is increasedThe design of change and the causes of the costThe design adopts the new standard, new technology, new technology, to replace the original design of the project, and put to use more favorable for owner reduce project cost, the depth of the design documents, cannot satisfy the relevant provisions of the relevant design phase of engineering change and requirements, cost increase or decrease, and when designing units in the preliminary design to fully consider the network planning, and in local government and related departments (e.g., environmental protection, water conservancy, electricity, gas, communication, navigation, etc.) and the requirements of the project, the main structure change shape and size change etc, make the cost increase, and design personnel errors or omissions caused engineering change. Due to the "two SanShen school system to implement the change that cost is increased, Unit, uncoordinated cooperation between designers, or the highway facilities with the principal part of the project design, cause sync job change, make cost increase, and the design drawing not timely delivery time delay, provide, construction, make the cost compensation shutdown caused by increased.Tthe contractor to change and cause the influence. CostThe contractor is unable to perform the contract or can't completely, the contractor shall take remedial measures proposed change, this kind of change of engineering cost, can increase by contractor burden loss, the contractor has been approved changes when bidding of construction project, this kind of change of cost, but almost no effect for the contractor may save construction cost, and the contractor for construction is convenient, or to shorten the construction period, or to reduce the investment of construction, and puts forward such reasons, and more economical and reasonable, optimizing design scheme, this kind of change if owner recognized, can reduce the construction cost, also can reduce the cost of the owner and the contractor, mutually beneficial, According to the contract, the contractor couldn't finish, engineering construction contractextension, the owner may terminate the contract terms, according to the content of construction contract in whole or in part, by the contractor, this kind of other changes generally does not make owner cost increase, but will make the contractor under loss, due to the contractor technology or management of the error caused by engineering change, this kind of change to the contractor, the owner may claim generally do not increase the cost, stipulated in the contract, the contractor change by owner procurement materials, using other kinds of materials, and therefore model brand damage by contractor, unless the owner to approbate, generally do not add costthe supervisor of change and the causes of the costSupervision by the owner, commissioned by the cause of the change of the owner or expenses directly influence the cost. 1 and supervision engineer in order to coordinate the contractor's operation, or section of this project contractors to coordinate with relevant departments or units where the relations of production, easy cause engineering change caused by increased cost. the site supervision engineers in actual situation in the contract and the technical specification for the design, according to local modification and perfect or by design, this kind of change unit may cause increased cost. and supervision engineers work and coordination ability damage caused by lack of rework, engineering cost change work. and supervision engineer proposed optimization design or construction, the design optimization or contractor agree, can reduce engineering changes caused by the project cost.The environment factors and impact on the cost of changeEngineering geology unknown or insufficiency in design, engineering cost increased to. and highway engineering construction projects from the construction, project feasibility study, design and construction drawing design to construction, due to various reasons, the project in the declaration and approval process, some problems existing in the construction stage, these problems caused by exposure to change, and engineering cost increase. and national policies, laws and regulations and standard, the change of change, resulting in increased cost. Four, the local government of the people's production and life convenient scheme adopted by engineering change after that cost increase. whose house is caused by delay, the work of engineering change, could lead to increased cost.Highway engineering change of a variety of reasons, this means that the appraisal work for engineering changes are complex and difficult to decrease the cost, the change of the effects are also different. Through the analysis, is looking for engineering changes the various causes, andthrough the analysis of the cost control are not isolated, control cost, the key is to establish and perfect the scientific management system. Based on control cost, quality assurance and accelerate the progress, the principle of efficiency to determine the necessity and feasibility of engineering change. Only in this way can we truly achieve the effective control of the construction project cost and improve the economic benefit and social benefit.公路工程变更原因分析及其对工程造价的影响摘要：公路工程在实施阶段由于设计因素、环境因素等多方面的影响，发生工程变更是较常见的，文章结合工程实践，探讨工程变更的原因及其对工程造价的影响。

工程造价外文文献

毕业设计外文文献翻译院系：土木工程与建筑系年级专业：08级工程管理姓名：x学号：xOn the whole process of construction 附件：project cost control指导老师评语：指导教师签名：年月日On the whole process of construction project cost control 【Abstract】: This article mainly introduced the engineering project cost control throughout the whole process of project implementation, including project decision-making, project design, project bidding, project construction and completion of the settlement this five stages.【Keywords】: Project, the construction cost, engineering, project, construction, project costEngineering project cost control throughout the whole process of project implementation, including project decision-making, project design, project bidding, project construction and completion of the settlement this five stages. According to the statistics show that, in the project decision-making stage and design stage, and the influence of construction project cost is a 40% chance-75%; and in construction stage, influence the possibility of construction project cost is only 5%-25%.Obviously, control the cost of the key link is in the project implementation of decision-making and design stage before. And from a stage program speaking, construction management can play a decisive role. To control the engineering cost is in the design phase, project decision stage, stage of construction, project bidding, completed the stage of the settlement construction engineering cost incurred amount of control in the approval within the limit, and correct the deviation of at any time, ensure division breakdown their investment goal the realization, to get the best economic benefit and social benefit.1 whole process cost control each phase of the basic situationThe whole process of construction project cost control can be divided into the following basically five stages:1.1 construction project cost control decision-making stageP roject investment decision is choice and decided to invest action process, is aiming projecton the necessity and feasibility of technical and economic the authentication, correct decision-making is reasonable and the premise to control the engineering cost, including feasibility study, investment estimation, financial foundation estimates and evaluation data. Project investment decision stage cost control and management of the key is:1) Completes the project decision-making before preparation. Comprehensive collecting have material, including equipment operation, equipment technical parameters, the construction market dynamic and other related content of the original records and information. To do the scientific research work and then find out need emphasizes to solve the problems.2) to do a project proposal and feasibility studies reports. Must according to the market demand and development prospects, reasonably determine the scale of the project and construction standards. Two applications should be strong conviction and feasibility. In the fight for early project at the same time, should be completed as soon as possible of the feasibility study.3) science to develop the construction projects of benefit analysis of activities of investment estimate and work. The preparation of investment estimate to have the basis, to be as careful as possible and reasonable. From reality, full consideration to during the project that may arise during the process of all kinds of accidents and unfavorable factors, as well as their cost of the project may produce negative effects, want to consider the market situation and construction of the reserve price during the floating coefficient, like this can make the investment basically accord with the actual and leave room, make the investment estimate really play the role of control the total investment in the project.1.2 project cost control design stageThe government in accordance with the examination and approval according to regulation, design institute of professional elaborate design, the strict control of cost engineers, the engineering construction cost control design stage "trinity" optimal combination. The construction project design is by plans to reality decisive significance of the work phase,design work is one of the important principles to ensure that the design integrity, designed for this work include the design evaluation and comparison, the design scheme optimization design budgetary estimate, the compiling and examination, the list of quantities and control the compiling and price review.1) Reasonable function orientation and reliable design quality, meet the national standards, meet the project function requirement, this is the quality of the design of the four basic requirements. The function of the construction project positioning, first must do with national conditions, reflect the national strength. At the same time, the engineering design must meet the construction procedure in each stage of depth requirements, avoid and prevent "Sanchez" (budget exceeds the estimation, the budget exceeds the budget estimates, the settlement) takes place.2) Optimizing design scheme, effective control of the project cost. The design phase of the project cost control and management is not a simple design institute work content, the construction unit should also actively cooperate, have prior control and active management role. The construction unit in the review of the design unit design documents, first of all the attention to the optimization of design schemes of, should be based on all kinds of index and material to the total plane design, construction space and plane design for analysis. The two analysis of the cost of the project will not only, a major impact on construction and operation and the production, management have a great impact, but also for construction and operation of the production, management has significant correlation. In the choice of technology solutions, we should persist in China from the actual conditions of, in order to improve the benefit of investment for the premise, actively and steadily introducing advanced and reasonable technical scheme and mature new technology, new technology.3) Executes limitation for engineering design. To effectively control the construction cost, should be in the design process of the quota design way. The so-called quota design in accordance with approved reliability is in the study, investment estimation forehead design and construction design, and to guarantee the use function, under the premise of according tothe distribution of after thinning investment quota control, professional design, to try to stop not reasonable to change, in order to ensure that the total investment is not a breakthrough. Decomposition of total investment and project is a total of quota design and effective ways and main method, it is the design stage of the examination will be investment and decomposing the quantity of each professional, and then after thinning the decomposition to each unit engineering and the division of engineering, through the layers of decomposition to realize to the investment quota control and management, but also to achieve to design specifications, design standards, engineering quantity and project budget index, and other aspects of the management and control.Preliminary design must be in the feasibility study stage of investment estimate approval for the bottom line, and through the limitation of the way to control budget not more than the investment estimate, the focus is on the quantities and equipment, material control. So the amount of quota design and shall be in the feasibility study stage of design project examination and equipment, material standard as the basis for a feasibility study stage cannot be determined preliminarily concluded that for certain quantity. For the design, each professional design personnel should conscientiously strengthen project cost consciousness, and strictly according to the limit the decomposition of the design to control the project investment, to ensure that the design according to the limit in the decomposition of the investment to control the project, to secure the use function, under the premise of engineering cost and effort to control project in the limit of. To encourage and promote design personnel well design scheme selection, should introduce a competitive mechanism and implement bidding for the design, make the design units and design personnel increase market competition consciousness, try our best to make a design scheme more attain perfect.1.3 project tendering and bidding and sign a contract stageAnalysis of the specific conditions of the construction project, and according to the quantities bill valuation method, nine ministries to standard prepare the tender documents in the tender documents. Through the bid opening bid assessment, voted for a is able to satisfy the tenderdocuments, the provisions of the comprehensive evaluation standard, 2 it is able to meet the requirements of the tender documents and substantial after the appraisal bids the lowest price, but the bid price below the cost of except the winning bidder. The winning bidder is determined; the bid-winning notice issued in accordance with law, and in accordance with the tender documents and the bid documents of the winning bidder concludes a contract in writing.1) The tender documents to the list of quantities of programming. The list of quantities by the construction bidding, it is to point to by the bid invitation unit to provide a uniform bidding documents (including the quantities bill), bidding unit based on this, according to the tender documents to the list of quantities and the relevant requirements, the construction and the actual situation of the worked the construction organization design, according to the enterprise quota or refer to the competent administrative department of construction of the current consumption quota released and cost management agencies released to the market price of bid price quotation information, and the bid invitation unit selected according to the process of the winning bidder.2) to the list of quantities of law base price. The list of quantities of floor price under standard shall be in strict accordance with the "standard" to prepare to the list of quantities of engineering quantity are and comprehensive project content, according to the market price. Detailed list of engineering quantity of engineering quantity and wrote out the comprehensive project content may not be altered, fluctuation, must be kept and the bidding unit pricing the unity of the caliber. If the list of quantities and prepare the tender of base price is not same unit, should pay attention to release the list of quantities of the bidding documents and establishment of the strike to the list of quantities in the format and contents, description and so on various aspects keeps consistent, avoid from here and the result of failure or tender evaluation an injustice.3) The construction contract choice. The contract type selection should consider the factors include: the project scale and time limit for a project length, project competition, and projectsingle engineering projects are clear degree, the length of time, the project of the external environment factors. In the choice of the contract type, although the developer has the initiative, but the developer can't only consider their own interests, comprehensive consideration of the project shall be of various factors, consider the contractor bear ability, determined by the both parties of the contract type.1.4 project project construction cost controlBecause of project construction cycle is long, the economic relations and laws involving the complex relationship by natural conditions and objective, the great influence, lead to the actual situation of the project and project tendering and bidding situation will be compared has some changes. Therefore, often in engineering change and the contract price adjustment, the engineering claims this stage include the value of the project construction settlement and use fund plan and application.1) Try to control engineering change and the visa. In the project construction process, engineering change and the visa is inevitable, but will be powerful control. Due to the existence of loopholes for construction drawing and any defects and lead to change, except in the design drawings audit strictly when the party should be in the design, consultation, co-examination and technical consultation when carefully examine and check, in order to find the early to eliminate hidden dangers. Change hidden trouble found earlier, may cause loss of the small. So, should as far as possible to the design change control in the design stage initial, especially for those who can seriously affect engineering, more to want to use "down after the first, change" measures solved properly. Even in the construction process, also should strictly according to the visa procedures and provisions, such ability make project cost control effectively.2) Audit strictly engineering construction drawing budget. Supervisors should according to the progress of the construction drawing design plan and the construction of the actual schedule, timely construction drawing budget approved. Beyond the corresponding to budgetand construction drawing budget. Beyond the corresponding to the budget estimates construction drawing design part, will be detailed analysis, find out the cause, and promptly and project principal contact, depending on how to adjust or amend the truth agreed control goals. This is the cost of the project of dynamic control and management.3) into the scene, collect and master information related to the construction, do contract management work in project construction process, the personnel and cost control personnel related to often deeply the construction site, contrast carefully check construction drawings, and to project contract as the basis, the construction site to grasp the dynamic, assist owners to review and appraisal, because of the change of the design, the scene and visa and the additional costs is reasonable.1.5 The final accounts of the completed project phase and after completion engineering warrantyThe final accounts of the completed project is based on real number and currency index for the units of measure, which reflects the comprehensive completed projects start to project completion for all of the delivery of the construction cost, construction achievements and financial situation summary of the documents. Completed the final accounts by, completion financial final accounting statements, project completion figure, and project completion cost analysis of four parts. The quality repair warranty is a kind of after-sales service way, is the quality of contractor responsibility, among this warranty scope involves, period, economic responsibility and warranty costs and expenses processing.1) Audit completed projects compliance with the terms of these contract requirements content, whether acceptance, in the contract, the method of settlement, price basis, fees standard, advocate material price and discount and commitment to the facts are carried out.2) Audit component project and project unit price of fees whether the program specification,and presence of repetition and mistakes.3) Check take cover engineering acceptance record, see if any supervision engineer is signed, the completion of the project completion and whether chart are in agreement.4) Examine the change of the design in the original design of visa is a unit chief sign, whether the construction unit and supervision engineer is signed, the significant change of the design of the original design is the competent department for examination and approval. The above a not meeting the requirements, all can't calculate settlement range.5) Figure, according to the change of the design, completion visa checking the scene of engineering.6) Prepare tally with the actual situation of the completion settlement report, in the strict, reasonable, fairness, justice, and on the basis of the use situation of investment and project cost control management as the necessary analysis and summary.2 the current cost control management problems of researchAt present our country's basic construction system and process can ensure the engineering construction investment is effectively control and management, but in the practice process, there are still many problems to study it, as shown in the various stages of the disjointing of cost control, because of project decision-making and design, project bidding, project implementation and completion settlement auditing the four stages of the cost control and management of the construction units and are competent department, designing units, consulting unit lead implement, "railway, the police a tube, so it is difficult to set up the former control the latter, and the latter influence the former the effective management of the system.2.1 ignore investment stage and design phase of the cost controlAt present some design units in order to meet the time limit for construction unit, in order to drive plan and not enough jobs meticulous, led to construction drawing design depth is not enough, some of the projects (such as decoration parts) and even appeared practices and selection explanation not clear, design and the actual cost budget created serious deviation, budget documents are not complete, etc. Some design units do not follow the principle of value engineering, optimization design, but seek high security and design fees, even with the owner in collusion, cause low quoted price is high and settlement.2.2 The bidding phase don't respect the market rules, and blind low prices and wanton expand specified materials and equipmentMainly lies in:One is the provisions in some areas after the appraisal use only the minimum bid price method. When the bid assessment by the bidders from low to high price in the sort of bid documents detailed review, judge a qualified three bidders according to quote from low to high order from the candidate. Forced many construction enterprises to make "low price, high price list claim" strategy. Some even publicly threatened: "into do not come is your fierce, came in is my fierce", this is against the principle of good faith, cause the construction bidding process, tender offer for professionals often breaks the glasses. 2 it is part of the owner ignore the objective law of the construction market to expand the party a appoints supply materials and equipment, and the scope of the contract for narrow, increasing the owner and the construction units of conflict.2.3 construction stage design, blind change visa, result in a claim, cause cost increaseBelow the cost, in order to change the state of losses, a construction enterprise is often use time limit for stress condition, forcing the owner to accept its change design scheme, replacement of materials required refiners, even and owner hook connect, will see conditions and other projects QianZhengLiang increase several times, cause loss of state-owned assets; 2 it is construction unit and a few design units collude in collusion, in construction process manufacturing a lot of the change of the design, the construction unit of high prices claim for convenience.2.4 completed project cost audit settlement stage management confusionAccording to the relevant laws and regulations, engineering audit charge is according to the settlement and subtract the forehead charges, consulting unit to high fees, often WanHuaYang reduce quantity, and even apply mechanically norm, multiplied by less than 1 unit price coefficient. And the contractor on the buy off the cost intermediary organizations personnel, quantity and subtract the forehead of the false report.3 whole process cost control management advice3.1 design units should be held responsible for their own reasons of the value of the project providedIn view of the current social intermediary cost consultation institutions participated in the design stage cost control of the few features, set up bear related civil liability constraint mechanism, make design institute has a relatively independent responsibility restraint. Suchas design depth is not enough, the design drawing contradictory between different work, the conflicts between; The design of the function and will be setting is unreasonable, affecting the normal use, which caused economic losses, design units shall bear the corresponding civil liabilities.3.2 The bid assessment methods, and the bid evaluation committee and budget control price reviewThe government investment projects, the comprehensive assessment shall be allowed to bid evaluation method, and should also set the lower bid price quotations, a bidder below lowest limit of the offer, shall be null standard treatment. The price for budget control review to scientific and reasonable can't raise or floating, to control the price discount published, the competent construction administrative departments should give correct. At the same time for budget control in the price of illegal or irregular and infringe upon the lawful rights and interests of the parties bidding behavior to deal with according to law.According to the contract period, 3.3 contract signed contract amount is fixed costThe contract is throughout the entire cost control, the soul of the stand or fall of contract signing, directly influence subsequent cost control of performance, because both sides sign the is fixed unit price or a fixed unit price contract, recent construction engineering material market price volatility is frequent, make the developer and the contractor can predict market price risk, leading to the price of work valuation dispute increase, part of the project under construction is already seriously affected the construction progress and quality of the project. In order to safeguard the legitimate interests of the contracting parties, ensure the construction market stability and development, according to the national nine ministries and the standard construction bidding documents "(2007 edition) general provisions of contract provisions of international engineering construction bidding risk sharing practices, the proposal of theconstruction engineering construction of valuation price 0-5% risk sharing.3.4 construction stages invite professional construction cost consultation company site trackingIn order to strengthen the dynamic cost management, the employer may, the cost of hiring a professional consulting company, make full use of their familiar with the business, rich experience and understanding market and specialization and socialization and advantage, strict control engineering change, strengthen economic management visa.【Summary】：Above all, it is known that the investment control in the construction of the key is, three key points is feasibility research, design and contract, solve the problem that is the core of control and management. The engineering cost control and management is a dynamic process, in each project construction phase, may be because the market conditions change or other reasons, the engineering investment determination and the engineering cost control tends to be complicated, this needs will project cost management to meet both overall and selectively. To recognize cost and time limit, the quality of the dialectical relationship between, unity, in different stages of the project implementation, cost consultation with staff always to control the engineering cost economic consciousness, careful analysis and make full use of all kinds of information in the construction period, grasp the market pulse, become passive to active, and through the parties positive efforts to work, avoid or reduce the loss of the construction funds, maximize construction funds for the benefit of investment.【References】:[1] WeiRuiLi, WangXuePeng. Construction engineering project cost management discussion [J]. J wit, 2011, (19).[2] JiaoTianLei. Engineering project cost management in the whole process of managementand control [J]. Gansu and science and technology, 2009 (3).[3] ZhangHongBin. For enterprise engineering project cost management and control discussion [J]. Tianjin metallurgy, 2010, (4).[4] SuYong, GeWeiPing. Substation project cost management current situation analysis and countermeasures study [J]. Electric engineering in Anhui vocational technical college journal, 2006, (4).[5] LiuYingMin. Of engineering project cost management [J]. Shanxi building, 2007, (11).[6] MaiHui can. Shallow engineering project cost management and cost control [J]. Sichuan building materials, 2007, (2).[7] JiangJiXing. Strengthen cost management establish control consciousness [N]. China construction news, 2011-07-04 (008).翻译：浅谈工程建设项目的全过程造价控制【摘要】：本文主要介绍了工程建设项目的造价控制贯穿项目实施的全过程，包括项目决策、项目设计、项目招标投标、项目施工和竣工结算这五个阶段。

工程造价专业英语作文

工程造价专业英语作文Title: The Role of Cost Engineering in Construction Projects。

Cost engineering plays a pivotal role in the successful execution of construction projects, serving as a fundamental aspect of project management. This essay aims to delve into the significance of cost engineering in the construction industry, highlighting its key functions and challenges.First and foremost, cost engineering encompasses the process of estimating, budgeting, and controlling the costs associated with a construction project. It involves a comprehensive analysis of various factors, including labor, materials, equipment, overheads, and contingencies. By accurately estimating costs at the outset of a project, cost engineers provide stakeholders with valuable insights into the financial implications of the endeavor.Effective cost engineering facilitates the establishment of realistic budgets, which are essential for project planning and resource allocation. By identifying cost drivers and potential cost-saving measures, cost engineers enable project managers to make informed decisions that optimize resource utilization and mitigate financial risks. Moreover, continuous cost monitoring and control throughout the project lifecycle ensure that expenditures remain within the approved budgetary constraints.Another critical function of cost engineering is risk management. Construction projects are inherently complex and subject to various uncertainties, such as changes in market conditions, regulatory requirements, and unforeseen events. Cost engineers assess these risks and develop strategies to minimize their impact on project costs. This may involve the implementation of risk mitigation measures, such as contingency planning and contractual provisions, to safeguard against cost overruns and delays.Furthermore, cost engineering contributes to theoverall quality and efficiency of construction projects. By conducting value engineering analyses, cost engineers identify opportunities to optimize project performance while minimizing costs. This may involve the substitution of materials, redesigning of processes, or reevaluating project specifications to achieve the desired outcomes more cost-effectively. Additionally, cost engineers play a crucial role in ensuring compliance with relevant industry standards and regulations, thereby enhancing the safety and sustainability of construction projects.Despite its importance, cost engineering faces several challenges in practice. One such challenge is the dynamic nature of construction projects, which often involve evolving requirements and unexpected changes. Adapting to these changes while maintaining cost control requiresagility and proactive management strategies. Additionally, accurately forecasting costs in the face of marketvolatility and economic uncertainties poses a significant challenge for cost engineers.Moreover, the reliance on data-driven decision-makingunderscores the importance of robust cost estimation techniques and sophisticated analytical tools. Cost engineers must leverage advanced methodologies, such as parametric estimating, historical data analysis, and probabilistic modeling, to enhance the accuracy and reliability of cost projections. Furthermore, collaboration with other stakeholders, including architects, engineers, and contractors, is essential to ensure alignment and consensus on cost-related matters.In conclusion, cost engineering plays a vital role in the successful delivery of construction projects by providing comprehensive cost management services. From initial cost estimation to ongoing cost monitoring and control, cost engineers facilitate informed decision-making and mitigate financial risks. Despite facing various challenges, the adoption of advanced techniques and collaborative approaches enables cost engineers to optimize project outcomes and deliver value to stakeholders.。

工程管理专业施工项目的成本控制毕业论文外文文献翻译及原文

毕业设计（论文）外文文献翻译文献、资料中文题目：施工项目的成本控制文献、资料英文题目：The construction project cost control 文献、资料来源：文献、资料发表（出版）日期：院（部）：专业：工程管理班级：姓名：学号：指导教师：翻译日期： 2017.02.14学生毕业设计（论文）英文翻译The construction project cost control1 IntroductionProject is a corporate image window and effectiveness of the source. With increasingly fierce market competition, the quality of work and the construction of civilizations rising material prices fluctuations. uncertainties and other factors, make the project operational in a relatively tough environment. So the cost of control is through the building of the project since the bidding phase of acceptance until the completion of the entire process, It is a comprehensive enterprise cost management an important part, we must organize and control measures in height to the attention witha view to improving the economic efficiency of enterprises to achieve the purpose.2 Outlining the construction project cost controlThe cost of the project refers to the cost and process of formation occurred, on the production and operation of the amount of human resources, material resources and expenses, guidance, supervision, regulation and restrictions, in a timely manner to prevent, detect and correct errors in order to control costs in all project costs within the intended target. to guarantee the production and operation of enterprises benefits.3 The cost of the construction enterprise principles of construction enterprises controlThe cost of control is based on cost control of construction project for the center, Construction of the project cost control principle is the enterprise cost management infrastructure and the core, Construction Project Manager in the Ministry of Construction of the project cost control process, we must adhere to the following basic principles.1）Principles lowest cost. Construction of the project cost control, the basic purpose is to cost management through various means, promote construction projects continue to reduce costs, to achieve the lowest possible cost of the objective requirements. The implementation of the principle of minimum cost, attention should be given to the possibility of reducing costs and reasonable cost of the minimum. While various mining capacity to reduce costs so that possibility into reality; The other must proceed from actual conditions, enacted subjective efforts could achieve a reasonable level of the minimum cost.2）Overall cost control principles. Cost Management is a comprehensive enterprise-wide, and full management of the entire process, also known as the "three" of management. The full project cost control is a system of substantive content, including the departments, the responsibility for the network and team economic accounting, and so on, to prevent the cost control is everybody's responsibility, regardless of everyone. Project cost of the entire process control requirements to control its costs with the progress of construction projects in various stages of continuous, neither overlooked nor time when, should enable construction projects throughout costs under effective control.3）Dynamic Control principle. Construction of the project is a one-time, cost control should emphasize control of the project in the middle, that is, dynamic control. Construction preparation stage because the cost is under the control of construction design to determine the specific content of the cost, prepare cost plans, the development of a cost-control program for the future cost control ready. And thecompletion of phase cost control, as a result of cost financing has been basically a foregone conclusion, even if the deviation has been too late to rectify.4）Principle of management by objectives. Management objectives include : setting goals and decomposition, the goal of responsibility and implementation of the aims of the inspection results of the implementation, evaluation of the goals and objectives that form the management objectives of the planning, implementation, inspection, processing cycle, PDCA.5）Responsibility, authority, in light of the profit principle. Construction of the project, project manager of the department, the team shouldering the responsibility for cost control at the same time, enjoy the power of cost control, project manager for the department, Teams cost control in the performance of regular examination and appraisal of implementation of a crossword punishment. Only to do a good job duties, rights, and interests combining cost control, in order to achieve the desired results.4 The construction cost control measuresProject Manager of the project cost management responsibility for the first, comprehensive organization of the project cost management, timely understand and analyze profit and loss situation and take prompt and effective measures; engineering technology department should ensure the quality, Regular tasks to complete as much as possible under the premise adopt advanced technology in order to reduce costs; Ministry of Economic Affairs should strengthen budget management contract, the project to create the budget revenue; Finance Ministry in charge of the project's financial, Analysis of the project should keep the financial accounts of reasonable scheduling of funds.Develop advanced economies reasonable construction program, which can shorten the period, and improve quality, reduce costs purpose; paid attention to quality control to eliminate redone, shorten the acceptance and reduce expenses; control labor costs, material costs, Machinery and other indirect costs.5 Strengthen project cost control practical significance1）Strengthen project cost control railway construction enterprises out of their predicament, the need to increase revenue. At present, the railway construction enterprises just into the market, to participate in market competition, will face a tough test of the market. Now the construction market liberalization, implement bidding system, and the strike has very low weight, To create efficiency is the only way to strengthen internal management and improve their internal conditions, internal efficiency potentials. Therefore, the strengthening of project cost control is a very realistic way.2）Strengthening Project Cost control is adapt to the market competition, and strengthening internal management to the needs of their work. With the railway enterprise's rapid development, construction increasingly fierce market competition. For a period of time, the railway construction enterprises will face the increasingly fierce market challenges Construction of the business environment difficult to be improved. Efficiency increases, effective cost control and claims will be strengthened in the future management focus. This requires the railway construction enterprises should respect the unity of the work to reduce costs and enhance efficiency objectives.6 Currently construction enterprise project cost control analysis of the current project cost6.1 Problems and the causes of the current project implementationIn summary, the current project of cost management, accounting only after the accounting, rather than advance the prevention and control things. The reasons are : lack of cost awareness. simply that the cost of management is the financial sector or the superior leadership, have nothing to do with them. only focused on the "production tasks are completed" and "contracting profit and loss," the groups have a "negative effect." Therefore, project to mobilize the full participation of the Ministry of cost control, deepening of the project cost management imperative.6.2 Project Department analysis of the reasons for the losses as a project of building productsCommodities direct producers, both under the contract and construction drawings, self-regulating organizations of the construction authority, but also by contracting, design, Enterprises and other projects related to the construction of the units affected and constrained. In addition, geological and climate changes, Design changes, but on objective factors of the construction projects have a significant impact, and all of the above factors will affect the cost of project expenditures.6.2.1 Lost control of the cost of the so-called subjective reasons,Subjective reasons refer to the project, can not dispose of any external influence on the control of the costs, As mentioned above the project with the Ministry of Construction for the autonomy of the cost. mainly include the following aspects :1）No strict cost control of the overall goal or no cost control goals. Most of the loss items Department head, there is no cost control goals. Although some but not strictly enforced, thus the cost of the project is out of control.2）Materials, spare parts planning, procurement, inspection, custody, out of the reservoir, consumption of the system is not sound. the loss of the item, the purchase of materials and accessories unplanned phenomenon abound. procurement lies in the number of project managers even material, the result is bound to lead to a backlog of material, cost overruns.3）Serious quality problems. serious losses Project Department, almost all relatively serious quality problems, resulting in rework, repair, It seems a repetition of construction, increase the costs of construction. For example, in the bridge construction, there is the basis sank, Pier deflect such phenomena.4）Unreasonable arrangements. During the construction process, the project was not in a reasonable allocation of manpower, materials, equipment and other resources. lead to a waste of sabotage work; Construction of the manufacturing arrangements unreasonable to step in to complete the actual conduct of the second, three complete, the resulting redone, and so on.5）More accidents. the loss of the item, Most of the projects have occurred in the Department of varying degrees of security incidents and minor injuries affected employees work injuries have affected staff work, Also the cost of medical expenses, but can also enable the staff of physical and skills decline, reduced labor and labor efficiency; fatal accidents resulting in huge pension costs to be incurred, directly increasing costs, and may also affect sentiment reduce production efficiency.6）Contract management confusion. the loss of the item, Most of the projects the Ministry failed contract management awareness, knowledge of the contract, and have little do not understand the basic elements of the contract, contract management led to confusion, enterprises suffered huge economic losses.6.2.2 The influence of objective factors of the project is to increase the total cost of a connection so-called objective factorsProject Department is unable to control its own and must take place or because there are things or phenomena, such as contracting, design, enterprises in terms of the contract for the project outside the Ministry of Construction issued the directive, geological and climate changes, Design changes such. These factors for the emergence of the cost incurred, Project Department is not the objective to control costs. These factors are :1）Costs. Some enterprises in order to gain access to a particular market in the qualifications, thereby meeting the quality of construction projects built on the premise that right to take the tender bid price is lower than the cost of bidding strategy for the final bidding process, in the operating strategy is bound to happen, but projects are concerned, no matter what steps are taken it will be difficult to make these projects profitable.2）Geological and Climate changes. the geological conditions are inconsistent with the design, Projects will be forced to change the construction method, thus affecting the construction period, so that the total project costs. the same time will also cost breakdown of a larger change. Winter, Construction of the rainy season andthe number of days of sandstorms construction increase, the Ministry will allow the project to increase various fees.3）Design changes. various engineering design changes so that the project will cost changes affect the total project cost. For example, contracting unit to increase the number of extend or shorten the construction period. changes in construction plans and projects to improve the quality of grading, etc..4）Construction design less reasonable. As a construction site with the actual difference individual projects in construction design at the time of the existence of irrational phenomena, such as the personnel, materials, equipment arrangements and plans for the accuracy of individual projects or processes of the time, the lack of quality considerations. Projects can make the cost increase.5）Sabotage work of the project. As work on the link between tasks or for other reasons, Projects have some sabotage work, in this period sabotage work needed to meet various costs, such as wages or basic living expenses. fixed asset depreciation charges, indirect costs of the project. Projects6.3 Containment measures for the lossContainment measures for the loss of containment for a variety of reasons over the project losses, in accordance with the requirements of clear responsibilities, Projects should control the cost of the project is able to cost control measures were taken. for a project to control the cost of the project by the Ministry of control; and the project beyond the control of the costs or losses, by the enterprises should take measures to control it.6.3.1 Construction projects to the Ministry of the so-called cost control measures to the Ministry of Construction of the project.Construction projects to the Ministry of the so-called cost control measures to the Ministry of Construction of the project.refer to enterprises directly organized by the staff and farmers contract workers, temporary workers and the labor force composedof the internal construction team, mixed construction team and construction services sub-teams composed of Construction Projects.1）Determine the total project cost targets and the profit and loss targets. Every one of the successful projects, in a formal pre-construction, identify the project and sub-project for the dates, materials, equipment and identify the project and sub-project of the labor, materials, machinery and indirect costs. On this basis, The project will determine the profit or loss targets.2）Implemented material bidding procurement. Projects must thoroughly change the past, piecemeal purchase goods, the enterprises of all projects, including the main material to build on all the tender for the procurement, Obviously choice of material suppliers. Meanwhile, we should fully consider the time value of money. choose a suitable form of payment.3）Controllable according to the principle of cost control. The Ministry of Construction of the project team and staff, In accordance with the principle of cost control and distinguish the project department, the construction team and the staff of the costs of monovalent responsibility, including dates Price, Materials Unit, select the unit and units, or fixed rates. We must strictly enforce the internal inspection system for pricing, timely construction team and staff honored economic interests.4）Enhance safety, and quality management. Projects must establish security, Quality is the major benefits of efficiency. actively prevent and avoid possible security, quality accidents, for the accident-prone regions of constant surveillance. to strictly implement the responsibility for the accident the penalty system so that all staff clearly establish the safety, quality consciousness.5）Strengthen contract management. All of the projects, In particular, the main sub-projects of the need for a designated person responsible for contract management, In addition to the timely settlement or deal with the things, with the other units or individuals from the economic, technical, labor matters, must sign the formal contract, not with the verbal agreement. at the contract process, should act in strict accordance with the relevant provisions of the contract for disposal.6）Improve the management system, establish a cost-control mechanism. Projects must connect with reality, the development and control of the cost to draw up rules and regulations, such as material procurement, custody, inspection, warehousing, consumption system, the labor remuneration management systems, equipment management, financial management, accounting, security, quality management approach, the post-mortem valuation methods, and to establish the cost of the project department of internal control and supervision mechanisms.6.3.2 Construction of the sub-item of cost control measures in the so-called sub-Construction Projects1）Determined in accordance with the assembly The objectives of the sub-projects to determine the price.2）Allocated in strict accordance with the requirements of the project and the clearing. Projects must be in accordance with the provisions of the contract settlement price of the project, completion of the sub-units of qualified engineering post-mortem will be conducted on a monthly basis for the valuation and then clearing projects, sub-units will not be allowed to advance baiting, and for projects.3）Strictly prohibited construction of external units link . Projects must be in accordance with the requirements of enterprises, prohibit external units linked to various forms of external construction enterprises. Any item shall not allow the Ministry of External units to enterprises in the name of contractor carry out projects, the post-mortem pricing and settlement payments.7 On how to conduct effective cost control7.1 Segmentation project costOptimal allocation of project resources project allocation of resources is directly related to cost control methods and extent of For many of the ongoing state-controlled construction of large enterprises, Basically, the cost of the project is a subcontractor costs and cost of the construction team, and the enterprises is the main source of economic control subcontractor costs. Team Construction costs are often difficult tocreate cost-effective. both how the mix, the cost of the project into how, This enterprise is the key to cost control problems.7.2 The development of a cost planA cost of the complete dynamic control costs and responsibilities of sub-division and the initial cost of the two identified some of the costs, To work out the total cost of the scheme, the total cost of the scheme is in addition to covering the costs and responsibilities of sub-cost, should also consider funding the project site, the higher management fees, taxes and other factors. The total cost will be divided into two parts :1）Uncontrollable cost of the project : it refers to taxes, the higher management fees can not be subjective project management control;2）Controllable cost of the project : the total cost of the scheme, apart from the uncontrollable costs other than the full cost, such as subcontracting costs, responsibility for the cost, on-site expenses.Controllable costs are focused on cost control, controllable cost of the project is planned prior to the commencement of the construction time, construction, construction design based on. Along with the progress of works and that will happen if the construction program improvement works to change, to build factors such as rising price changes. So for the cost of plans to conduct timely adjustment, the cost of the scheme is to ensure that the guidance and control, in the adjustment should pay more attention to analysis of the different factors changes to the original cost of the scheme is the extent of the effect.7.4 Conduct a cost analysis, improve enterprise cost management level after the end of constructionAccording to the total cost of the scheme and controllable cost plan and the final actual cost comparison analysis, cost analysis charts available in various forms, such as comparative analysis not only to the total cost, but also to process cost analysis, but mainly to process analysis, process reached higher or lower cost reasons.1）First analyze the conditions for the construction, Construction programs, materials price changes caused by changes in the unit price for the process, collecting the introduction of new technology, new techniques, and new materials processes cost information;2）Followed by the subjective determination of the cost comparison part of the process the price analysis by the enactment of the unreasonable result of the high or low price processes, while accumulation of written information, for the future development of similar projects the cost of the scheme;3）Sub-units of information collection and evaluation of sub-contractors, prepared, "the roster of qualified sub-contractors" for future similar projects to choose subcontractors and sub-development costs;4）Summary subcontracting costs and responsibility cost data, after screening analysis for enterprise Bidding reference.8. Summary of the construction project cost controlSummary of the construction project cost control is a complicated systematic project. the application needed to be applied with flexibility the actual operation be adapted to local conditions, different sizes, different construction firms and different management systems have differences, But in any case are the construction of the production and operation of enterprises in the amount of human resources, material resources and expenses, guidance, supervision, regulation and restriction. Therefore, "increases production and economize, to increase revenues and reduce expenditures" is a common construction enterprises, This requires constant practice in the review and improve cost control, ways and means to ensure that the project cost goals.施工项目的成本控制1 引言项目是企业的形象窗口和效益源泉。

工程造价英语作文

工程造价英语作文The cost estimation for engineering projects can be quite challenging. It involves analyzing various factors such as materials, labor, equipment, and overhead costs. It requires attention to detail and a good understanding of the project scope.Sometimes unexpected expenses can arise during the construction phase, leading to cost overruns. It is important to have contingency plans in place to deal with such situations. Proper budgeting and monitoring of expenses are essential to ensure the project stays within budget.Cost control is crucial in managing engineering projects. This involves tracking expenses, comparing them to the budget, and making adjustments as needed. Effective cost control can help prevent financial losses and ensure the project is completed on time and within budget.In order to accurately estimate project costs, it is important to consider all potential expenses, including indirect costs such as permits, insurance, and legal fees. Failure to account for these costs can lead to budget overruns and delays in project completion.Regular communication with stakeholders is key to successful cost management. By keeping all parties informed of budget updates and any potential cost issues, project managers can work together to find solutions and keep the project on track financially.。