I-PEX 20347系列EDP连接器规格书
I-PEX 20454-330T极细同轴线I连接器【产品 找→苏州汇成元】
50
50
30
40
40
40
40
40
20
30
40
50
PLUG PULL BAR
பைடு நூலகம்
20
20
30
30
40
40
50
50
20
30
40
50
30
40
50
RECEPTACLE
20
20
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
40
40
40
2574-150 2574-1502 2657-130 2657-140 2699-040 2699-040L 2699-140 2699-140L 3241-120 3241-130 3241-140 3241-150 2576-020 2576-020-00 2576-030 2576-030-00 2576-040 2576-040-00 2576-050 2576-050-00 2576-120 2576-130 2576-140 2576-150 3274-0301 3274-0401 3274-0501 20455-020E-02 20455-020E-12 20455-030E-02 20455-030E-02-S 20455-030E-12 20455-030E-12-S 20455-030E-12W 20455-030E-14 20455-030E-66 20455-030E-66-S 20455-030E-68 20455-030E-76 20455-030E-76-S 20455-030E-78 20455-030E-89 20455-030E-89-S 20455-030E-99-S 20455-040E-02 20455-040E-02-S 20455-040E-12
I-PEX 20320-050T TO I-PEX 20454-040T LCD线检验规格
NB TEST Micro coaxial CABLE
(笔记本电脑测试线)
简介 Introduction 此款MCC屏线使用I-PEX 20454 20320系列连接器,由于此2款连接器信号传输非常稳定,应用面非常广泛,线束 采用40#同轴线,产品广泛用于NB TV 工控显示产品等.
-40℃ to 85℃
3.75Gbps~20Gbps
-20℃ to 210℃ 0.75Gbps~5Gbps 3.75Gbps(MAX)
导通阻抗:5Ω, DC:200V/20MΩ,AC:100V/0.5MA,瞬间断短路:3sec
NB, IPAD, Note PC,Flat panel Display 36AWG 40AWG
I-PEX 20454-040T I-PEX 20320-050T UL1354 40AWG OD:0.35MM 7/0.03(50欧姆) I-PEX 20455-040E 20323-050E 0.01*0.6MM(H*W) OD:0.5MM Sn99Ag0.3Cu0.7
黑色醋酸布 黄色KAPTON
主要材料说明 Main Material Description
连接器型号(1) CN1 Conn Plug P/N 连接器型号(2) CN2 Conn Plug P/N 线束规格 Cable Spec 连接器母坐型号 Receptacle Conn P/N 接地片规格 G/B Spec 锡丝规格 Tin Wire Spec 辅材 Auxiliary 其它材料 Other Materials
Production Line Profile
生产车间 Producing DepartMain Production Equipment
I-PEX 20347板端母座,EDP驱屏线,20346线端连接器常用液晶面板型号清单
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
13.3 13.3 13.3 13.3 13.3 8.9 8.9 8.9 13.3 8.9 8.9 12.1 11 10.1 8.9 8.9 8.9 10.2 13.3 13.3 13.3 8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.9 15.4 15.4 14.1 14.1 13.3 13.3 13.3 13.3 13.3 12.1 12.1 8.9 8.9 8.9 8.9 8.9
I-PEX 20347板端型号清单---通禾精密
面板型号 / 详细参数尺寸 LTD104EDZS 10.4 LP121WX4-TLA2 12.1 LTN141AT06-G01 14.1 LTN141AT06-003 14.1 LTN141BT08-003 14.1 N133I6-P0A 13.3 N133I6-L03 13.3 N089L6-L07 8.9 N089L6-L06 8.9 N089L6-L05 8.9 N070Y1-L0A 7 A089SW01 V1 8.9 LMS700JF04-0 7 LTD089EXYM 8.9 LT121DEVKP00 12.1 LT121DEE2P00 12.1 B121EW13 V1 12.1 B121EW13 V0 12.1 N154I6-L05 15.4 LP121WX4-TLA1 12.1 N133I6-P01 13.3 B121EW09 V6 12.1 LP133WX2-TLG6 13.3 LTD133EWDA 13.3 LTD121EXSS 12.1 LTD121EWRF 12.1 LTD111EXCA 11.1 LTD089EXWS 8.9 LTN141AT06-001 14.1 LTN133AT15-G01 13.3 LTN133AT11-G01 13.3 LTN089NT01 8.9 LP171WU4-TLA4 17.1 LP171WU4-TLA3 17.1 LP171WU4-TLA2 17.1 LP171WU4-TLA1 17.1 LP141WX5-TLB1 14.1 LP141WX5-TLA1 14.1 LP133WX2-TLE1 13.3 LP133WX2-TLD1 13.3 LP133WX2-TLCA 13.3 LP133WX2-TLC6 13.3 信号接口型号 20347-025E-02 20347-030E-02 20347-340E-12 20347-340E-12 20347-340E-12 20347-140E-02 20347-330E-12 20347-340E-12 20347-340E-12 20347-340E-12 20347-330E-12 20347-340E-12 20347-140E-12 20347-030E-02 20347-030E-02 20347-030E-02 20347-030E-02 20347-040E-02 20347-340E-12 20347-030E-02 20347-330E-12 20347-340E-12 20347-330E-12 20347-040E-02 20347-030E-02 20347-030E-02 20347-030E-02 20347-030E-02 20347-340E-12 20347-340E-## 20347-330E-12 20347-340E-12 20347-040E-01 20347-040E-01 20347-040E-01 20347-040E-01 20347-340E-12 20347-340E-12 20347-340E-12 20347-140E-12 20347-330E-12 20347-330E-12 接口脚数 25 pins 30 pins 40 pins 40 pins 40 pins 40 pins 30 pins 40 pins 40 pins 40 pins 30 pins 40 pins 40 pins 30 pins 30 pins 30 pins 30 pins 40 pins 40 pins 30 pins 30 pins 40 pins 30 pins 40 pins 30 pins 30 pins 30 pins 30 pins 40 pins 40 pins 30 pins 40 pins 40 pins 40 pins 40 pins 40 pins 40 pins 40 pins 40 pins 40 pins 30 pins 30 pins 接口脚距 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm 0.4 mm
连接器产品规格书
4.1.2
绝缘电阻
Insulation Resistance
适合嵌合状态；相邻端子间或端子与地面间加DC 500V下测定。
Mate applicable and apply 500V DC between adjacent terminal or ground.
≥1000MΩMIN
产品名称Product Name
产品型号Part Number
排針
2.54PH 3X3P系列
【3】定格RATINGS
项目Item
规格Requirement
最大容许电压
Rated Voltage(MAX)
[AC(有效值rms)/DC]
最大容许电流
Rated Current(MAX)
2.0A
使用温度范围
适合嵌合状态；35±2℃、5±1%的盐水喷雾48小时；试验后常温水洗；再室温干燥。
48±4 hours exposure to a salt spray from the 5±1% solution at 35±2℃.
外观
Appearance
无损坏、腐蚀
No Damage
接触抵抗
Contact Resistance
Soldering Time：2±0.5 sec.
Soldering Temperature：235±5℃
0.2 mmfrom terminal tip
沾敷性
Solder Wetting
沾敷面积95%以上
4.3.13
耐焊接热
Resistance to
Soldering heat
端子前端浸入260±5℃的锡槽中；历时5±0.5 sec。
EDP Micro coaxial CABLE (EDP高清极细同轴线屏线)
连接器耐温与传输速率 Conn Temperature &Transmission Speed 线束耐温与传输速率 Cable Temperature &Transmission Speed 产品传输速率 Product Transmission Speed 产品测试要求 Product Test Requirement 产品用途 Product Use 连接器适用线规 Applicable Cable Size 其它特性 Other Performance
-40℃ to 85℃
3.75Gbps~20Gbps
-20℃ to 210℃ 0.75Gbps~5Gbps 3.75Gbps(MAX)
导通阻抗:5Ω, DC:200V/20MΩ,AC:100V/0.5MA,瞬间断短路:3sec
NB Note PC,Flat panel Display 40AWG 42AWG
EDP Micro coaxial CABLE
(EDP高清屏线)
简介 Introduction 此款MCC屏线使用I-PEX 20524系列连接器,由于此款连接器屏蔽效果非常好,信号传输非常稳定,线束采用40# 双绞同轴线,产品广泛用于NB料说明 Main Material Description
I-PEX 20523-030T I-PEX 20523-030T UL1354 42AWG 40AWG 双绞线 OD:0.35MM 7/0.03(50欧姆) 20525-030E 0.01*0.6MM(H*W) OD:0.5MM Sn99Ag0.3Cu0.7
专业I-PEX4微型射频同轴连接器
①
TOOL
② Packing
0 1 R
for Hand Tool ( with Notch ) for Semi-Auto ( without Notch ) Reel 1reel : 2,000pcs
【Applicable Cable Size】
Part No. (Au) Part No. (Ag)
◆All Center contact are Gold Plated I-PEX Co.,Ltd.
1
Easy and Speedy Cable Connection of Center Conductor ( i-Fit ) and Outer Conductor at Only one operation by our special assembling tool
Dielectric Core
(7/0.05) φ0.15
(φ0.85)
(φ0.65)
Nominal
Nominal
Nominal
Nominal
Braided Shield of Outer Conductor
Nominal
Single Braided Shield
Single Braided Shield
2.1
Housing
Sect.A-A
Contact
【Material and Finish】
Parts
HOUSING CONTACT GROUND CONTACT
Material
LCP UL94V-0 COPPER ALLOY COPPER ALLOY
Plating / Color (3pads)
NATURAL Au Au or Ag
XARP-04V-E连接器规格书
H J S THeader for 2.5mm (.098") pitch XAconnector for use specifically with resin coated ("potted") PC boardsFeatures ––––––––––––––––––––––––• Header for 2.5mm (.098") pitch XA connector for use specifically with resin coated ("potted") PC boardsThis header is tall and fully shrouded so as to prevent the resin used to coat the PC board from coming into contact with the mating pins.• InterchangeabilityDesigned to accept XA mating receptacles.Specifications –––––––––––––––––––• Current rating:3A AC, DC (AWG#22)• Voltage rating:250V AC, DC• Temperature range:-25˚C to +85˚C(including temperature rise in applying electrical current)• Contact resistance:Initial value/10m Ωmax.After environmental testing/20m Ωmax.• Insulation resistance:1,000M Ωmin.• Withstanding voltage:1,000V AC/minute • Applicable wire:AWG #28 to #22• Applicable PC board thickness: 1.6mm (.063")* Contact JST for details.Standards ––––––––––––––––––––––0Recognized E603891Certified LR208122R9851220Disconnectable Crimp style connectorsXA CONNECTORHigh box typeRadial TapeContact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––XA CONNECTORHigh box typeRetainer –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––<For reference>As the color identification,the following alphabet shall be put in the underlined part.For availability, delivery and minimum order quantity, contact JST.ex.XAP-02V-1-oo -(blank)…natural (white)K…black R…red E…blue M…green Y…yellowShrouded header –––––––––––––––––––––––––––––––––––––––––––––––––––––––––XA CONNECTORHigh box typeShrouded header on radial-tape –––––––––––––––––––––––––––––––––––––––––––––<For reference>As the color identification,the following alphabet shall be put in the underlined part.For availability, delivery and minimum order quantity, contact JST.ex.BH02B-XASK-BN -S…natural (ivory)K…black R…red M…green Y…yellowPackaging specifications –––––––––––––––––––––––––––––––––––––––––––––––––––Products of different packaging specifications sre also available.Contact JST for details.XA CONNECTORHigh box typePC board layout(viewed from component side)and Assembly layout ––––––––––––––––––Note:1. Tolerances are non-Cumulative: ±0.05mm( ±.002") for all centers.2. Hole dimensions differ according to the kind of PC board and piercing method.The dimensions above should serve as a guide line. Contact JST for details.Taping specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––Applicator for the semi-automatic press AP-K2N–––––––––––––––––––––––––––––––。
PXI系列板卡选型文件
1.1PXI5374 (5)1.1.1PXI5374-R (5)1.2PXI5477 (6)1.2.1PXI5477-R10 (7)1.3PXI5487 (8)1.3.1PXI5487-R (9)1.4PXI5488 (9)1.4.1PXI5488-R (10)1.4.2PXI5488-R01 (10)1.4.3PXI5488-R02 (11)1.5PXI5871 (11)1.5.1PXI5871-R (13)1.5.2PXI5871-R10-RS422 (13)1.6PXI5872 (15)1.6.1PXI5872-R (16)1.7PXI5659A (16)1.7.1PXI5659-R10 (17)1.8PXI5260 (17)1.8.1PXI5260-R01 (19)1.9PXI5610 (20)1.10PXI5090 (20)1.11PXI5678 (21)1.12CPCI6965 (22)2C1调理系列 (22)2.1C1-TL1 (23)2.2C1-TL2 (25)2.3C1-TL3 (26)2.4C1-TL4 (27)2.6C1-TL7 (29)2.7C1-TL8 (30)2.8C1-TL10 (31)2.9C1-TL11 (32)2.10C1-TL12 (32)2.11C1-TL13 (33)2.12C1-TLDY (35)2.13C1-TLMB N (35)3PCI系列 (36)3.1PCI5313 (36)3.2GX6873 (37)4通用转接盒系列 (38)4.1J36A系列通用转接盒KT-ZKH-0904 (38)4.1.1技术指标 (39)4.2J36A系列通用转接盒KT-ZKH-0905 (40)4.2.1技术指标 (40)4.3J14A系列通用转接盒C1-ZKH-J14A-KJ (41)4.3.1技术指标 (42)4.4J14A系列通用转接盒ZKH-J14A-JJ (43)4.4.1技术指标 (44)4.5J14A系列通用转接盒ZKH-J14A-KK (44)4.5.1技术指标 (45)4.6SCSI、FCI96芯通用转接盒ZKH-SCSI-KJ (46)4.6.1技术指标 (47)4.7DB系列通用转接盒C1-ZKH-DB-KJ (47)4.7.1技术指标 (48)4.8J7系列通用转接盒ZKH-J7-KJ (49)4.8.1技术指标 (49)5定制转接盒系列 (50)5.1定制J7接插件转接盒C1-ZKH-J7-JJ (50)5.1.1技术指标 (51)5.2定制SCSI、CD1接插件转接盒KT-ZKH-0901 (52)5.2.1技术指标 (52)5.3定制SCSI-68接插件转接盒KT-ZKH-0902 (53)5.3.1技术指标 (54)5.4定制SCSI、DB接插件转接盒KT-ZKH-0903 (55)5.4.1技术指标 (55)5.5定制SCSI、FCI96芯接插件转接盒DCY-006 (56)5.5.1技术指标 (57)5.6定制AIRBORN接插件转接盒ZKH-AIRBORN1 (58)5.6.1技术指标 (58)5.7定制J14A、J36A、AIRBORN接插件转接盒ZKH-AIRBORN2 (59)5.7.1技术指标 (60)5.8定制DB接插件转接盒F172-ZKH-DB (61)5.8.1技术指标 (61)16UPXI系列1.1PXI5374PXI5374是基于PXI总线隔离型的64路OC方式的开关量输出板，可外接不同电源（+5V、+12V、+24V），具有多种操作模式。
产品规格书 1.0 连接器规格书说明书
制 订Edit审 核Check批 准ApprovalPage 1 of 7NO.: PS0020顾客产品名称型号Client Product Name: 产品名称型号Product Name: 1.0连接器 产品编码Part Number: 规格书版本号Version Number: 0产品规格书PRODUCT SPECIFICATION编号Serial numberPS0020 版本号Version Number产品名称Product Name 1.0连接器产品规格书Product Specification产品编码Part Number1 适用范围Scope本产品规格书适用于乐清市杰渝电子有限公司生产的1.0电子连接器。
This product specification covers the requirements for. 1.0 connector, which is designed and manufactured by YUEQING JIEYU ELECTRONICS Co.,LTD.2 相关标准Related Standards以下参考文件是本规格书的一个组成部份。
若本规格书中的要求与产品图纸发生冲突，则产品图中的要求为优先；若本规格书中的要求与参考文件中的要求冲突，则本规格书为优先。
The following documents form a part of this specification. In the event of conflict between the requirements of this specification and the product drawing, the product drawing shall take precedence. In the event of conflict between the requirements of this specification and the referenced documents, this specification shall take precedence.GB/T 2421 电工电子产品环境试验T esting method for Environmental of Electrical ConnectorsGB/T 2423 电工电子产品环境试验T esting method for Environmental of Electrical ConnectorsGB 2424电工电子产品基本环境试验规程T esting method for Environmental of Electrical ConnectorsGB/T 5095电子设备用机电元件基本试验规程及测量方法T esting procedure/method for components of electric equipment3 产品简图&PCB布线图Product Drawing & PCB Lay out19.0 20.35 18.0 19.35 17.0 18.35 16.0 17.35 15.0 16.35磷铜镀锡Tin/platedQuantity材料Material备注Remark编号Serial numberPS0020 版本号Version Number产品名称Product Name 1.0连接器产品规格书Product Specification产品编码Part Number5 产品性能Performance5.1机械性能Mechanical序号No.项目Item 测试条件Test Condition 规格Requirement5.1.1外观Appearance目测Checking by eye视力：1.0以上Eyesight: > 1.0照明：（200～300）lxLamp: （200～300）lx目测距离：（0.3～0.5）mSpace: （0.3～0.5）m1塑料件表面应无明显疤痕、凹陷、开裂及影响使用的变形。
EDPA-420微机型线路备自投装置用户手册V1.00_u
EDPA-420微机型线路备自投装置用户手册珠海市恒瑞电力科技有限公司2010年12月目录第一章简介 (2)1.1 应用范围 (2)1.2 主要特点 (2)第二章主要功能 (3)2.1保护功能 (3)2.2 测量功能 (3)2.3 监视功能 (3)2.4 控制功能 (3)2.5 事件记录 (3)2.6 人机接口 (3)2.7 通信功能 (4)第三章结构及安装 (4)3.1 装置结构 (4)3.2 机械安装 (4)3.3 电气接线注意事项 (5)3.4 通信连接 (5)第四章使用说明 (6)4.1 面板布置 (6)4.2 装置操作说明 (6)第五章保护原理 (10)5.1 保护功能说明............................................................................................... 错误！未定义书签。
第六章定值参数表 . (10)6.1 定值整定表 (11)6.2 参数整定表 (11)6.3 开入量表 (13)6.4 开出传动表 (13)第七章用户安装调试说明 (14)第八章技术参数 (15)第九章附录 (17)9.1 外部端子图 (17)9.2 外部接线示意图 (18)9.3 保护功能校验............................................................................................... 错误！未定义书签。
第一章简介1.1 应用范围EDPx-400系列微机型保护装置主要面向380V~10kV等级的发电厂厂用电系统、环网及开闭所、电力系统及工矿企业用户终端变等电力设备的用户。
EDPA-420微机型线路备自投装置适用于380V～10kV电压等级的各种变电站的进线备自投方式,可自动识别系统运行方式，自动实现备用电源的自投，便于实现无人值班。
FPGA可编程逻辑器件芯片EP4CE40F23I7中文规格书
Chapter 6:I/O Features in Arria II DevicesI/O Standards Support Arria II Device Handbook Volume 1: Device Interfaces and IntegrationI/O Standards SupportTable 6–1 lists the supported I/O standards for Arria II GX devices and the typicalvalues for input and output V CCIO , V CCPD , V REF , and board V TT .Table 6–1.I/O Standards and Voltage Levels for Arria II GX Devices I/O Standard StandardSupportV CCIO (V) V CCPD (V) V REF (V) V TT (V) Input Operation Output Operation 3.3-V LVTTL/3.3-V LVCMOS JESD8-B3.3/3.0/2.5 3.3 3.3——3.0-V LVTTL/3.0-V LVCMOS JESD8-B3.3/3.0/2.5 3.0 3.0——2.5-V LVTTL/LVCMOS JESD8-53.3/3.0/2.5 2.5 2.5——1.8-V LVTTL/LVCMOS JESD8-71.8/1.5 1.82.5——1.5-V LVCMOS JESD8-111.8/1.5 1.52.5——1.2-V LVCMOS JESD8-121.2 1.22.5——3.0-V PCI PCI Rev 2.23.0 3.0 3.0——3.0-V PCI-X (1)PCI-X Rev 1.03.0 3.0 3.0——SSTL-2 Class I, II JESD8-9B(2) 2.5 2.5 1.25 1.25SSTL-18 Class I, II JESD8-15(2) 1.8 2.50.90 0.90SSTL-15 Class I —(2) 1.5 2.50.750.75HSTL-18 Class I, II JESD8-6(2) 1.8 2.50.900.90HSTL-15 Class I, II JESD8-6(2) 1.5 2.50.750.75HSTL-12 Class I, II JESD8-16A(2) 1.2 2.50.60.6Differential SSTL-2JESD8-9B(2), (3) 2.5 2.5— 1.25Differential SSTL-18JESD8-15(2), (3) 1.8 2.5—0.90Differential SSTL-15 —(2), (3) 1.5 2.5—0.75Differential HSTL-18JESD8-6(2), (3) 1.8 2.5—0.90Differential HSTL-15JESD8-6(2), (3) 1.5 2.5—0.75Differential HSTL-12JESD8-16A(2), (3) 1.2 2.5—0.60LVDS ANSI/TIA/EIA-644(2) 2.5 2.5——RSDS and mini-LVDS —— 2.5 2.5——LVPECL —(2)— 2.5——BLVDS—(2) 2.5 2.5——Notes to Table 6–1:(1)PCI-X does not meet the PCI-X I-V curve requirement at the linear region.(2)Single-ended SSTL/HSTL, differential SSTL/HSTL, LVDS, LVPECL, and BLVDS input buffers are powered by V CCPD .(3)Differential SSTL/HSTL inputs use LVDS differential input buffers without R D OCT support.Chapter 6:I/O Features in Arria II DevicesI/O Structure Arria II Device Handbook Volume 1: Device Interfaces and IntegrationI/O StructureThe I/O element (IOE) in the Arria II devices contains a bidirectional I/O buffer andI/O registers to support a completely embedded bidirectional single data rate (SDR)or double data rate (DDR) transfer. The IOEs are located in I/O blocks around theperiphery of the Arria II device. There are up to four IOEs per row I/O block and fourIOEs per column I/O block. The row IOEs drive row, column, or direct linkinterconnects. The column IOEs drive column interconnects.The Arria II bidirectional IOE supports the following features:■Programmable input delay ■Programmable output-current strength ■Programmable slew rate ■Programmable bus-hold ■Programmable pull-up resistor ■Programmable output delay ■Open-drain output ■R S OCT ■R D OCT ■R T OCT for Arria II GZ devices ■Dynamic OCT for Arria II GZ devices ■PCI clamping diode 1517-pinFlip Chip FBGAI/O726726726Clock 888XVCR channel242424Note to Table 6–6:(1)Each transceiver channel consists of two Tx pins, two Rx pins and a transceiver clock pin.Table 6–6.Pin Migration Across Densities in Arria II GZ Devices (Note 1)(Part 2 of 2)PackagePin Type DeviceEP2AGZ225EP2AGZ300EP2AGZ350Chapter 6:I/O Features in Arria II DevicesI/O Structure Arria II Device Handbook Volume 1: Device Interfaces and Integration MultiVolt I/O InterfaceArria II architecture supports the MultiVolt I/O interface feature that allows Arria IIdevices in all packages to interface with systems of different supply voltages.You can connect the VCCIO pins to a power supply voltage level listed in Table 6–10,depending on the output requirements. The output levels are compatible withsystems of the same voltage as the power supply. (For example, when VCCIO pins areconnected to a 1.5-V power supply, the output levels are compatible with 1.5-Vsystems).You must connect the Arria II GX VCCPD power pins to a 2.5-, 3.0-, or 3.3-V powersupply and the Arria II GZ VCCPD power pins to a 2.5- or 3.0-V power supply. Usingthese power pins to supply the pre-driver power to the output buffers increases theperformance of the output pins. Table 6–10 lists the Arria II MultiVolt I/O support.Table 6–10.MultiVolt I/O Support for Arria II Devices (Note 1)VCCIO (V)(2)Input Signal (V)Output Signal (V)1.2 1.5 1.8 2.5 3.0 3.3 1.2 1.5 1.8 2.5 3.0 3.31.2v —————v —————1.5—v v ————v ————1.8—v v —————v ———2.5———v v (3)(4)v (3)(4)———v ——3.0———v v (4)v (4)————v —3.3 (5)———v v (4)v (4)—————v Notes to Table 6–10:(1)The pin current may be slightly higher than the default value. You must verify that the driving device’s V OL maximum and V OH minimum voltagesdo not violate the applicable Arria II V IL maximum and V IH minimum voltage specifications.(2)Each I/O bank of an Arria II device has its own VCCIO pins and supports only one V CCIO , either 1.2, 1.5, 1.8, 2.5, 3.0, or 3.3V. The LVDS I/O standardis not supported when V CCIO is 3.0 or 3.3V. The LVDS input operations are supported when V CCIO is 1.2, 1.5, 1.8, or 2.5V. The LVDS output operations are only supported when V CCIO is 2.5V.(3)Altera recommends using an external clamp diode when V CCIO is 2.5 V and the input signal is 3.0 or 3.3 V.(4)Altera recommends using an external clamp diode on the row I/O pins when the input signal is 3.0 or 3.3V for Arria II GZ devices.(5)Not applicable for Arria II GZ devices.。
XG4平板电缆连接器商品说明书
30Flat Cable Connector XG4The mainstream of circuit boardconnectors, meeting MIL standards with improved design.•With our new production system, we have improved the reliability and decreased the cost.•Space-saving box-type plug (XG4C) available.•The (XG4C) can be locked using the lock lever.•Conforms to MIL standards (MIL-C-83503)•UL standard component (file no. E103202)Ordering InformationSee ordering tables on the following pages.■Recommended WiresIDC1.27 mm (0.050 in.) pitch flat cable AWG28 (strand wire).Specifications■Materials/Finish*For standard 1.15µm gold plating.XG4AXG4C AppearanceMIL-type plugBox-type PlugRated current 1 A (at 20°C)Rated voltage 250 VACContact resistance 20 m Ω max. (at 20 mV , 100 mA max.)Insulation resistance 1,000 M Ω min. (at 500 VDC)Withstand voltage 500 VAC for 1 min. (leakage current 1 mA max.)Connector insertion 200 gf (0.44 lb.f) max. per terminalContact removal 40 gf (0.088 lb.f) min. (test gauge with 0.64-mm (0.025-in.)Usage durability 50 times min.Operating temperature-55°C to 105°CItem Mil-type plug XG4A. Box-type plug XG4C Housing PBT resin with glass (UL94V-0)/black ContactMoving end Brass/nickel base, 0.15 µm gold plated*TerminalBrass/nickel base, 0.2 µm tin platedMIL Type Plug with Long Lock – XG4A■DimensionsXG4A-@@31/@@71 (Straight dip terminals)XG4A-@@34/@@74 (Right-angle dip terminals)Flat Cable Connector XG431MIL Type Plug with Long Lock – XG4A■Ordering InformationUse in combination with strain-relief sockets.No. of contactsDimensions [mm (in.)]PolarityguidesModelStrain relief(with lock)A B C D E Set*Socket**(with open-end cover)1032.0 (1.26)17.5 (0.69)10.16 (0.4)21.8 (0.86)27.9 (1.1)38.8 (1.53)0XG4A-1071XG4A-10741XG4A-1031XG4A-1034 1437.1 (1.46)22.6 (0.89)15.24 (0.6)26.9 (1.06)33.0 (1.3)43.9 (1.73)1XG4A-1431XG4A-1434 1639.6 (1.56)25.2 (0.99)17.78 (0.7)29.5 (1.16)35.6 (1.4)46.5 (1.83)1XG4A-1631XG4A-1634 2044.7 (1.76)30.2 (1.19)22.86 (0.9)34.5 (1.36)40.6 (1.6)51.5 (2.03)1XG4A-2031XG4A-2034 26 52.3 (2.06)37.9 (1.49)30.48 (1.2)42.2 (1.66)48.3 (1.9)59.2 (2.33)1XG4A-2631 XG4A-2634 3057.4 (2.26)42.9 (1.69)35.56 (1.4)47.2 (1.86)53.3 (2.1)64.2 (2.53)1XG4A-3031XG4A-3034 3462.5 (2.46)48.0 (1.89)40.64 (1.6)52.3 (2.06)58.4 (2.3)69.3 (2.73)1XG4A-3431XG4A-3434 4070.1 (2.76)55.6 (2.19)48.26 (1.9)59.9 (2.36)66.0 (2.6)76.9 (3.03)1XG4A-4031XG4A-4034 5082.8 (3.26)68.3 (2.69)60.96 (2.4)72.6 (2.86)78.7 (3.1)89.6 (3.53)1XG4A-5031XG4A-50342XG4A-5071XG4A-5074 6095.5 (3.76)81.0 (3.19)73.66 (2.9)85.3 (3.36)91.4 (3.6)102.3 (4.03)1XG4A-6031XG4A-60342XG4A-6071XG4A-6074 64100.6 (3.96)86.1 (3.39)78.74 (3.1)90.4 (3.56)96.5 (3.8)107.4 (4.23)1XG4A-6431XG4A-64342XG4A-6471XG4A-647432Flat Cable Connector XG4MIL Type Plug with Short Lock – XG4A■DimensionsXG4A-@@32/@@72 (Straight dip terminals)XG4A-@@35/@@75 (Right-angle dip terminals)Flat Cable Connector XG433MIL Type Plug with Short Lock – XG4A ■Ordering InformationUse in combination with strict non-strain-relief socketsNo. of contacts Dimensions (mm [in.])PolarityslotsModelA B C D E F Straight dipterminalsRight-angledipterminals1032.0 (1.26)17.5 (0.69)10.16 (0.4)21.8 (0.86)27.9 (1.1)35.8 (1.41)0XG4A-1072XG4A-10751XG4A-1032XG4A-1035 1437.1 (1.46)22.6 (0.89)15.24 (0.6)26.9 (1.06)33.0 (1.3)40.9 (1.61)1XG4A-1432XG4A-1435 1639.6 (1.56)25.2 (0.99)17.78 (0.7)29.5 (1.16)35.6 (1.4)43.5 (1.71)1XG4A-1632XG4A-1635 2044.7 (1.76)30.2 (1.19)22.86 (0.9)34.5 (1.36)40.6 (1.6)48.5 (1.91)1XG4A-2032XG4A-2035 2652.3 (2.06)37.9 (1.49)30.48 (1.2)42.2 (1.66)48.3 (1.9)56.2 (2.21)1XG4A-2632XG4A-2635 3057.4 (2.26)42.9 (1.69)35.56 (1.4)47.2 (1.86)53.3 (2.1)61.2 (2.41)1XG4A-3032XG4A-3035 3462.5 (2.46)48.0 (1.89)40.64 (1.6)52.3 (2.06)58.4 (2.3)66.3 (2.61)1XG4A-3432XG4A-3435 4070.1 (2.76)55.6 (2.19)48.26 (1.9)59.9 (2.36)66.0 (2.6)73.9 (2.91)1XG4A-4032XG4A-4035 5082.8 (3.26)68.3 (2.69)60.96 (2.4)72.6 (2.86)78.7 (3.1)86.6 (3.41)1XG4A-5032XG4A-50352XG4A-5072XG4A-5075 6095.5 (3.76)81.0 (3.19)73.66 (2.9)85.3 (3.36)91.4 (3.6)99.3 (3.91)1XG4A-6032XG4A-60352XG4A-6072XG4A-6075 64100.6 (3.96)86.1 (3.39)78.74 (3.1)90.4 (3.56)96.5 (3.8)104.4 (4.11)1XG4A-6432XG4A-64352XG4A-6472XG4A-6475Type ModelLong lock XG4Z-0010Short lock XG4Z-001134Flat Cable Connector XG4Box-type – XG4C■DimensionsBox typeXG4C-@@31/@@1071(Straight dip terminals)XG4C-@@31/@@1074(Right-angle dip terminals)Flat Cable Connector XG43536Flat Cable Connector XG4Box-type – XG4C■Ordering InformationNote: The box-type plug can be locked using lock lever XG4Z-0011 (sold separately).No. of contactsPolarity storeDimensions [mm (in.)]ModelABCStraight dipterminalsRight-angle dip terminals 10020.0 (0.79)17.5 (0.69)10.16 (0.4)XG4C-1071XG4C-10741XG4C-1031XG4C-103414125.1 (0.99)22.6 (0.89)15.24 (0.6)XG4C-1431XG4C-143416127.6 (1.09)25.2 (0.99)17.78 (0.7)XG4C-1631XG4C-163420132.7 (1.29)30.2 (1.19)22.86 (0.9)XG4C-2031XG4C-203426140.3 (1.59)37.9 (1.49)30.48 (1.2)XG4C-2631XG4C-263430145.4 (1.79)42.9 (1.69)35.56 (1.4)XG4C-3031XG4C-303434150.5 (1.99)48.0 (1.89)40.64 (1.6)XG4C-3431XG4C-343440 1 58.1 (2.29)55.6 (2.19)48.26 (1.9)XG4C-4031XG4C-403450170.8 (2.79)68.3 (2.69)60.96 (2.4)XG4C-5031XG4C-50342XG4C-5071XG4C-507460183.5 (3.29)81.0 (3.19)73.66 (2.9)XG4C-6031XG4C-60342XG4C-6071XG4C-607464188.6 (3.49)86.1 (3.39)78.74 (3.1)XG4C-6431XG4C-64342XG4C-6471XG4C-6474Flat Cable Connector XG437■Cable Number and Contact PositionCable and corresponding contact no.The contact numbers are not printed on the connector. Use the trian-gular mark as a guide when wiring and designing circuit boards. For the cable number, count starting from the cable mark side as shown below.■Mated DimensionsPrecautionsManufacturing tools, polarity slots, and polarizing keys are available depending on model. Please contact Omron for more information.Conditions for automatic soldering (jet type)Soldering temperature:250°C ± 5°CContinuous soldering period: 5 seconds or lessHandling of XG4UDo not use or store XG4U’s in an environment condensed with mag-netic particles.XG4A2-level type right-angle terminal plug (terminal side)XG4MSocket (mating side)XG4ARight-angle terminal plug (terminal side)XG4AStraight terminal plug (terminal side)XG4U and XG4M and XG4C (Straight terminal)XG4U and XG4M and XG4C(Right-angle terminal)Terms and Conditions of Sale1.Offer; Acceptance. These terms and conditions (these "T erms") are deemedpart of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronic Components LLC ("Seller"). Seller hereby objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these T erms.2. Prices; Payment. All prices stated are current, subject to change withoutnotice by Seller. Buyer agrees to pay the price in effect at time of shipment.Payments for Products received are due net 30 days unless otherwise stated in the invoice.3. Discounts. Cash discounts, if any, will apply only on the net amount ofinvoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Seller's payment terms and (ii) Buyer has no past due amounts owing to Seller.4. Currencies. If the prices quoted herein are in a currency other than U.S. dol-lars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller and which is available on the due date; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dol-lars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 5. Governmental Approvals. Buyer shall be responsible for, and shall bear allcosts involved in, obtaining any government approvals required for the impor-tation or sale of the Products.6. Taxes. All taxes, duties and other governmental charges (other than generalreal property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller.7. Financial. If the financial position of Buyer at any time becomes unsatisfactoryto Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these T erms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts.8. Cancellation; Etc. Orders are not subject to rescheduling or cancellationunless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith.9. Force Majeure. Seller shall not be liable for any delay or failure in deliveryresulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority.10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:1. Shipments shall be by a carrier selected by Seller;2. Such carrier shall act as the agent of Buyer and delivery to such carriershall constitute delivery to Buyer;3.All sales and shipments of Products shall be FOB shipping point (unlessotherwise stated in writing by Seller), at which point title to and all risk ofloss of the Products shall pass from Seller to Buyer, provided that Sellershall retain a security interest in the Products until the full purchase price is paid by Buyer;4. Delivery and shipping dates are estimates only.5.Seller will package Products as it deems proper for protection againstnormal handling and extra charges apply to special conditions.11.Claims. Any claim by Buyer against Seller for shortage or damage to theProducts occurring before delivery to the carrier must be presented in writing to Seller within 30 days of receipt of shipment and include the original trans-portation bill signed by the carrier noting that the carrier received the Products from Seller in the condition claimed. 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that theProducts will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). Seller disclaims all other warranties, express or implied.(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENT ATION,EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANT ABIL-ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUIT ABL Y MEET THE REQUIREMENTS OF THEIR INTENDED USE. Seller further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or oth-erwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obli-gation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that in no event shall Seller be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Seller's analysis confirms that the Products were properly handled, stored, installed and maintained and not sub-ject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment.Seller shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies, or any other materials or substances or environ-ments. Any advice, recommendations or information given orally or in writing are not to be construed as an amendment or addition to the above warranty.13.Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL,INDIRECT, INCIDENT AL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON-NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Seller exceed the individual price of the Product on which liability is asserted.14.Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates andits employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, inves-tigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these T erms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party.15.Property; Confidentiality. The intellectual property embodied in the Products isthe exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Notwithstand-ing any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials sup-plied by Seller to Buyer relating to the Products are confidential and propri-etary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party.16.Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any rightand no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder without Seller's written consent. (c) Law. These T erms are governed by Illi-nois law (without regard to conflict of law principles). Federal and state courts in Illinois shall have exclusive jurisdiction for any dispute hereunder.(d)Amendment. These T erms constitute the entire agreement between Buyerand Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice.. (g) Definitions. As used herein, "including" means "including without limitation".Certain Precautions on Specifications and Use1.Suitability for Use. Seller shall not be responsible for conformity with any stan-dards, codes or regulations which apply to the combination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will pro-vide applicable third party certification documents identifying ratings and limita-tions of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combi-nation with the end product, machine, system, or other application or use.Buyer shall be solely responsible for determining appropriateness of the partic-ular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i)Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.(ii)Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject toseparate industry or government regulations.(iii)Use in consumer products or any use in significant quantities.(iv)Systems, machines and equipment that could present a risk to life orproperty. Please know and observe all prohibitions of use applicable to this product.NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERL Y RATED AND INST ALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.2.Programmable Products. Seller shall not be responsible for the user'sprogramming of a programmable product, or any consequence thereof.3.Performance Data. Performance data given in this publication is provided as aguide for the user in determining suitability and does not constitute a warranty.It may represent the result of Seller's test conditions, and the users must corre-late it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability.4.Change in Specifications. Product specifications and accessories may bechanged at any time based on improvements and other reasons. It is our prac-tice to change part numbers when published ratings or features are changed,or when significant construction changes are made. However, some specifica-tions of the Product may be changed without any notice. When in doubt, spe-cial part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller representative at any time to con-firm actual specifications of purchased Product.5.Errors and Omissions. The information in this publication has been carefullychecked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions.6.RoHS Compliance. Where indicated, our products currently comply, to the bestof our knowledge as of the date of this publication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Sub-stances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information.OMRON ON-LINEGlobal - USA - Canada - http://www.omron.caCat. No. JB301-E3-01Printed in USAOMRON CANADA, INC.885 Milner AvenueT oronto, Ontario M1B 5V8416-286-6465OMRON ELECTRONIC COMPONENTS LLC55 E. Commerce Drive, Suite B Schaumburg, IL 60173847-882-22883/05 Specifications subject to change without noticeComplete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website at – under the “About Us” tab, in the Legal Matters section.ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.T o convert millimeters into inches, multiply by 0.03937. T o convert grams into ounces, multiply by 0.03527.。
4寸IPS屏Raspberry Pi适配器说明书
4inch HDMI LCD (H)User Manual OVERVIEWThis is 4inch resistive touch screen with 800x480 resolution, IPS screen, HDMI interface, designed for Raspberry PiFEATURES⚫4inch IPS screen, 480x800 hardware resolution⚫Resistive touch control⚫Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)⚫Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie)⚫Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required⚫HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)⚫ 3.5mm audio jack, supports HDMI audio output⚫Backlight can be turned off to lower power consumptionOverview (1)Features (1)How to use (3)Hardware connection (3)Method 1, Install driver (3)Method 2 Using ready-to-use image (4)Setting orientation (4)Calibration (5)Interface (6)The touch of the LCD can be driven in two ways: Method 1: Install driver manually; Method 2: Using ready-to-use ImageHARDWARE CONNECTION⚫Insert LCD directly to 40PIN header of Raspberry Pi.⚫Using the HDMI adapter or HDMI cable to connect HDMI interface of LCD to Raspberry Pi’s⚫Turn on the backlight by press the backlight button. (If you once turned it off)METHOD 1, INSTALL DRIVER1.Download lasted OS1image from Raspberry Pi website.2.Extract image from ZIP archive and write it to SD card3.After writing, modify the config.txt file which is located at root directory (BOOT) ofSD card. Append these statements to the end of config.txt file1This instruction is based on Raspbian OS4.Insert SD card to Raspberry Pi and power it on.5.Connect to network，open terminal to download and install driver.6.Waiting for rebootingMETHOD 2 USING READY-TO-USE IMAGE1.Download image we provided on wiki- Raspbian for 4inch HDMI LCD22.Extract the image file and write to SD card3.Insert the SD card to Raspberry Pi and power on.SETTING ORIENTATIONAfter installing driver, you can set the orientation as below【Note】X can be 0, 90, 180 or 2702It use the same driver and same image as 4inch HDMI LCDCALIBRATIONIf the touch of RPi LCD is not calibrated, you can calibrate the touch screen.1.Copy and install calibrator tool2.Install X service3.Running calibrator and finish calibration4.Saving the calibration data to 99-clibration.conf fileThe calibration data looks like；。
ICP DAS PISO PEX -730 Series 产品说明书
f oShipping PackageThe package includes the following items: ❶ PISO/PEX-730 Series Card x1 ❷ Quick Start (This Document) x1 ❸ Software CD x1❹ CA-4002 D-Sub Connectorx11PISO-730U PISO-730U-5VPEX-730I n s t a l l i n g w i n d o w s D r i v e rSetup the Windows driver, which can be obtained from either the companion CD-ROM or the ICP DAS web site:☑The UniDAQ driver supports 32-/64-bit Windows XP/2003/7/8/10; it is recommended to install this driver for new user.CD: \NAPDOS\PCI\UniDAQ\DLL\Driver/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/☐The PISO-DIO series classic driver supports Windows 98/NT/2K and 32-bit XP/ 2003/7/8/10. Recommended to install this driver for have been used PISO-730 series boards of regular user, please refer to :/pub/cd/iocard/pci/napdos/pci/piso-dio/manual/quickstart/classi c/❷Click the “Next>” button to start the installation.❸Check your I/O Card is or not on supported list, then click the “Next>” button.❹Select the installed folder, the default path is C:\ICPDAS\UniDAQ , confirm and click the “Next>”button.❺Check your I/O Card on list, then click the “Next>” button.❻ Click the “Next>” button on the Select Additional Tasks window.❼ Click the “Next>” button on the Download Information window.❽ Select “No, I will restart my computer later” and then click the “Finish” button.For more detailed information about how to install the UniDAQ driver, refer to “Section 2.2 Install UniDAQ Driver DLL” of the UniDAQ Software Manual, which can be found in the\NAPDOS\PCI\UniDAQ\Manual\folder on the companion CD, or can be downloaded from: /pub/cd/iocard/pci/napdos/pci/unidaq/manual/3Installation successful5P i n A s s i g n m e n t s+24V GNDGND CON1CON3ExternalCA-2002DN-37 I/O Wiring+24V GNDGND CON1CON3ExternalCA-2002 CA-3710DN-37 I/O Wiring❶❸❷and the black light means high status (Logic 1).❹❺❻PASS。