BIOSTAR映泰简介

合集下载

映泰A8800G+主板英文说明书

A880G+/A785G3+ Setup ManualFCC Information and CopyrightThis equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing.The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies.Table of ContentsChapter 1: Introduction (1)1.1Before You Start (1)1.2Package Checklist (1)1.3Motherboard Features (2)1.4Rear Panel Connectors (3)1.5Motherboard Layout (4)Chapter 2: Hardware Installation (5)2.1Installing Central Processing Unit (CPU) (5)2.2FAN Headers (7)2.3Installing System Memory (8)2.4Connectors and Slots (10)Chapter 3:Headers & Jumpers Setup (13)3.1How to Setup Jumpers (13)3.2Detail Settings (13)Chapter 4: RAID Functions (18)4.1Operating System (18)4.2Raid Arrays (18)4.3How RAID Works (18)Chapter 5: Useful Help (21)5.1Driver Installation Note (21)5.2Software (22)5.3Extra Information (26)5.4AMI BIOS Beep Code (28)5.5Troubleshooting (29)Appendix: SPEC In Other Languages (30)German (30)French (32)Italian (34)Spanish (36)Portuguese (38)Polish (40)Russian (42)Arabic (44)Japanese (46)A880G+/A785G3+1CHAPTER 1: INTRODUCTION 1.1B EFORE Y OU S TARTThank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below:Prepare a dry and stable working environment withsufficient lighting.Always disconnect the computer from power outletbefore operation.Before you take the motherboard out from anti-staticbag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.Avoid touching the components on motherboard or therear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board. Do not leave any unfastened small parts inside thecase after installation. Loose parts will cause short circuits which may damage the equipment.Keep the computer from dangerous area, such as heatsource, humid air and water . The operating temperatures of the computer should be0 to 45 degrees Celsius.1.2P ACKAGE C HECKLISTHDD Cable X 1 (optional) Serial ATA Cable X 2Rear I/O Panel for ATX Case X 1 Installation Guide X 1Fully Setup Driver CD X 1 (full version manual files inside)FDD Cable X 1 (optional)USB 2.0 Cable X1 (optional)Serial ATA Power Cable X 1 (optional)Note: The package contents may be different due to area or your motherboard version.Motherboard Manual2 1.3M OTHERBOARD F EATURESA880G+ A785G3+CPU Socket AM3AM D Phenom II/ Athl on II processorsAM D 64 Archi tecture enables 32 and 64 bi tcomputi ngSupports Hyper Transport 3.0 and Cool=n=Quiet(M aximum Watt: 125W)Socket AM3AM D Phenom II/ Athl on II processorsAM D 64 Archi tecture enables 32 and 64 bi tcomputi ngSupports Hyper Transport 3.0 and Cool=n=Quiet(M aximum Watt: 125W)FSB Support HyperTransport 3.0Supports up to 5.2 GT/s Bandwi dthSupport HyperTransport 3.0Supports up to 5.2 GT/s Bandwi dthChi pset AMD 880GAMD SB710AMD 785GAMD SB710Super I/O I TE 8721Provi des the most commonly used legacy SuperI/O functi onali tyLow Pi n Count I nterfaceEnvi ronment Control i ni tiativesH/W M oni torI TE's "Smart Guardian" functi onI TE 8721Provi des the most commonl y used legacy SuperI/O functi onali tyLow Pi n Count I nterfaceEnvi ronment Control i ni tiativesH/W M oni torI TE's "Smart Guardian" functi onMai n Memory DDR3 DIMM Sl ots x 2Max Memory Capaci ty 8GBEach DIMM supports 512M B/1GB/2GB/4GBDDR3Dual Channel M ode DDR3 memory modul eSupports DDR3 800 / 1066 / 1333Regi stered DIMM and ECC DIMM i s notsupportedDDR3 DIMM Sl ots x 2Max Memory Capaci ty 8GBEach DIMM supports 512M B/1GB/2GB/4GBDDR3Dual Channel M ode DDR3 memory modul eSupports DDR3 800 / 1066 / 1333Regi stered DIMM and ECC DIMM i s notsupportedGraphi cs I ntegrated i n AM D 880G Chi psetMax Shared Vi deo M emory i s 512M BDVI/HDMI/HDCP/UVD2 supportI ntegrated i n AM D 785G Chi psetMax Shared Vi deo M emory i s 512M BDVI/HDMI/HDCP/UVD2 supportI DE I ntegrated I DE Controll erUl tra DM A 33 / 66 / 100 / 133 Bus M aster M odesupports PIO M ode 0~4,I ntegrated I DE Controll erUl tra DM A 33 / 66 / 100 / 133 Bus M aster M odesupports PIO M ode 0~4,SATA II I ntegrated Seri al ATA Controll erData transfer rates up to 3 Gb/sSATA Versi on 2.0 speci fi cati on compli antI ntegrated Seri al ATA Controll erData transfer rates up to 3 Gb/sSATA Versi on 2.0 speci fi cati on compli antLAN Real tek RTL 8111DL10 / 100 / 1000 M b/s auto negotiati onHal f / Full dupl ex capabili tyReal tek RTL 8111DL10 / 100 / 1000 M b/s auto negotiati onHal f / Full dupl ex capabili tySound ALC6625.1 channel s audi o outHi gh Defi ni ti on Audi oALC6625.1 channel s audi o outHi gh Defi ni ti on Audi oPCI Express Gen2 x16 sl ot x1 PCI Express Gen2 x16 sl ot x1Sl otsPCI sl ot x2 PCI sl ot x2A880G+/A785G3+3A880G+A785G3+Fl oppy Connector x1 Fl oppy Connector x1 I DE Connector x1 I DE Connector x1 SATA Connector x4 SATA Connector x4 Front Panel Connector x1 Front PanelConnector x1 Front Audi o Connector x1 Front Audi o Connector x1 S/PDI F Out Connectorx1 S/PDI F Out Connector x1 CPU F an Header x1 CPU F an Header x1 System Fan Header x1 System Fan Header x1 CM OS cl ear Header x1 CM OS cl ear Header x1 USB Connectorx2 USB Connectorx2 Power Connector (24pi n) x1 Power Connector (24pi n) x1 Power Connector (4pi n) x1 Power Connector (4pi n) x1 Consumer I R Connector x1 Consumer I R Connector x1 Pri nter Port Connector x1 Pri nter Port Connector x1 On Board ConnectorSeri al port Connector x1 Seri al port Connector x1 Back Panel I/OPS/2 Keyboard / M ouse x1 HDMI Portx1 VGA Port x1 DVI -D Port x1 LAN Port x1 USB Port x4 Audi o Jackx3PS/2 Keyboard / M ouse x1 HDMI Port x1 VGA Port x1 DVI -D Port x1 LAN Port x1 USB Port x4 Audi o Jackx3Board Si ze 200 mm(W) x 244 mm(L) 200 mm(W) x 244 mm(L) Speci al FeaturesRAI D 0 / 1 / 1+0 support RAI D 0 / 1 / 1+0 support OS Support Wi ndows XP / Vi sta / 7Bi ostar reserves the ri ght to add or removesupport for any OS Wi th or wi thout notice.Wi ndows XP / Vi sta / 7Bi ostar reserves the ri ght to add or remove support for any OS Wi th or wi thout notice.NOTE: The HDMI and DVI-D ports both can provide digital video signals out-put function, butthese two interfaces cannot work at the same time. The chipset uses the same channel to control HDMI and DVI-D, so these ports cannot transmit video signal to different display panels simultaneously .Motherboard Manual4 1.5M OTHERBOARD L AYOUTA880G+/A785G3+5CHAPTER 2: HARDWARE INSTALLATION 2.1 I NSTALLING C ENTRAL P ROCESSING U NIT (CPU)Step 1: Pull the lever toward direction A from the socket and then raise thelever up to a 90-degree angle.Step 2: Look for the white triangle on socket, and the gold triangle onCPU should point towards this white triangle. The CPU will fit onlyin the correct orientation.Motherboard Manual6 Step 3:Hold the CPU down firmly, and then close the lever toward directB to complete the installation.Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the CPU_FAN1. This completes theinstallation.A880G+/A785G3+72.2 FAN H EADERSThese fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.CPU_FAN1: CPU Fan HeaderPin Assignment 1 Ground 2 +12V 3 FAN RPM ratesense4 Smart FanControl (By Fan)SYS_FAN1: System Fan HeaderPin Assignment 1 Ground2 +12V3 FAN RPM ratesenseCPU_FAN1 supports 4-pin head connector. SYS_FAN1 supports 3-pin head connector. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND.Motherboard Manual8 2.3 I NSTALLING S YSTEM M EMORYA. Memory Modules1. Unlock a DIMM slot by pressing the retaining clips outward. Align aDIMM on the slot such that the notch on the DIMM matches thebreak on the Slot.2. Insert the DIMM vertically and firmly into the slot until the retainingchip snap back in place and the DIMM is properly seated.A880G+/A785G3+9B. Memory CapacityDIMM Socket LocationDDR3 ModuleTotal MemorySizeDDR3_A1 512MB/1GB/2GB/4GBDDR3_B1 512MB/1GB/2GB/4GBMax is 8GB.C. Dual Channel Memory installationPlease refer to the following requirements to activate Dual Channel function:Install memory module of the same density in pairs, shown in the table Dual Channel Status DDR3_A1 DDR3_B1Disabled X O Disabled O X Enabled O O(O means memory installed, X means memory not installed.)The DRAM bus width of the memory module must be the same (x8 or x16)Motherboard Manual2.4 C ONNECTORS AND S LOTSFDD1: Floppy Disk ConnectorThe motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.133IDE1: Hard Disk ConnectorThe motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.The motherboard has a PCI to SATA Controller with 4 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.A880G+/A785G3+11ATXPWR1: ATX Power Source ConnectorThis connector allows user to connect 24-pin power connector on the ATX power supply.132413 +3.3V 1 +3.3V 14 -12V 2 +3.3V 15 Ground 3 Ground 16 PS_ON 4 +5V 17 Ground 5 Ground 18 Ground 6 +5V 19 Ground 7 Ground 20 NC 8 PW_OK 21 +5V 9 Standby Voltage+5V 22 +5V 10 +12V 23 +5V 11 +12V 24 Ground12 +3.3VATXPWR2: ATX Power Source ConnectorConnecting this connector will provide +12V to CPU power circuit.PinAssignment 1 +12V 2 +12V 3 Ground4 GroundBefore you power on the system, please make sure that both ATXPWR1 and ATXPWR2 connectors have been plugged-in.Motherboard Manual12 PEX16_1: PCI-Express Gen2 x16 Slot-PCI-Express 2.0 compliant.-Maximum theoretical realized bandwidth of 8GB/s simultaneously per direction, for an aggregate of 16GB/s totally.PCI1~PCI2: Peripheral Component Interconnect Slots This motherboard is equipped with 2 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits.A880G+/A785G3+13CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 H OW TO S ETUP J UMPERSThe illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is“open”.Pin opened Pin closed Pin1-2 closed3.2 D ETAIL S ETTINGSPANEL1: Front Panel HeaderThis 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.8Pin Assignment Function Pin Assignment Function 1 +5V 9 N/A2 N/A 10 N/A N/A3 N/A 11 N/A N/A4 Speaker SpeakerConnector 12 Power LED (+)5 HDD LED (+) 13 Power LED (+)6 HDD LED (-) Hard driveLED 14 Power LED (-)Power LED 7 Ground 15 Power button8 Reset control Reset button 16 GroundPower-on buttonMotherboard Manual14 F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel This header allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader.Pin Assignment1 +5V(fused)2 +5V(fused)3 USB-4 USB-5 USB+6 USB+7 Ground8 Ground9 NCF_US B2F US B_110 KeyJUSBV1/JUSBV2: Power Source Headers for USB PortsPin 1-2 Close:JUSBV1: +5V for USB ports at USBKB1/RJ45USB1.JUSBV2: +5V for USB ports at F_USB1/F_USB2.Pin 2-3 Close:JUSBV1: +5V STB for USB ports at USBKB1/RJ45USB1.JUSBV2: +5V STB for USB ports at F_USB1/F_USB2.Pin 1-2 closeJUSBV2JUSBV1Pin 2-3 closeA880G+/A785G3+15JSPDIFOUT1: Digital Audio-out ConnectorThis connector allows user to connect the PCI bracket SPDIF output header.Pin Assignment 1 +5V2 SPDIF_OUT 133 GroundF_AUDIO1: Front Panel Audio HeaderThis header allows user to connect the front audio output cable with the PC front panel. This header allows only HD audio front panel connector; AC’97 connector is not acceptable.Pin Assignment 1 Mic Left in 2 Ground 3 Mic Right in 4 GPIO 5 Right line in 6 Jack Sense 7 Front Sense 8 Key 9Left line in10 Jack SenseMotherboard Manual16 JCMOS1: Clear CMOS HeaderPlacing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard.Pin 1-2 Close:Normal Operation(default).Pin 2-3 Close:Clear CMOS data.1. Remove AC power line.2. Set the jumper to “Pin 2-3 close”.3. Wait for five seconds.4. Set the jumper to “Pin 1-2 close”.5. Power on the AC.6. Reset your desired password or clear the CMOS data.J_COM1: Serial Port ConnectorThe motherboard has a Serial Port Connector for connecting RS-232 Port.Pin Assignment1 Carrierdetect2 Receiveddata3 Transmitteddata4 Data terminal ready5 Signalground6 Datasetready7 Request to send8 Clear to send9 Ringindicator10 NCA880G+/A785G3+17J_PRINT1: Printer Port ConnectorThis header allows you to connector printer on the PC.CIR1: Consumer IR ConnectorThis header is for infrared remote control and communication.Pin Assignment 1 IrDA serial input 2 Ground 3 Ground 4 Key 5 IrDA serial output 6 IRPowerMotherboard Manual18CHAPTER 4: RAID FUNCTIONS 4.1 O PERATING S YSTEMSupports Windows XP, Windows Vista, and Windows 7.4.2 R AID A RRAYSRAID supports the following types of RAID arrays:RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times formany applications.RAID 1: RAID 1 defines techniques for mirroring data.RAID 1+0: RAID 1+0 combines the techniques used in RAID 0 and RAID 1.4.3 H OW RAID W ORKSRAID 0:The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access time and offers high bandwidth.Features and Benefits- Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the platform.- Uses: Intended for non-critical data requiring high data throughput, or any environment that does not require fault tolerance.- Benefits: provides increased data throughput, especially for large files. No capacity loss penalty for parity.- Drawbacks: Does not deliver any fault tolerance. If any drive in the array fails, all data is lost. -Fault Tolerance: No.Block 1Block 3Block 5Block 2Block 4Block 6A880G+/A785G3+19RAID 1:Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.RAID techniques can be applied for high-availability solutions, or as a form ofautomatic backup that eliminates tedious manual backups to more expensive and less reliable media.Features and Benefits- Drives: Minimum 2, and maximum is 2.- Uses: RAID 1 is ideal for small databases or any other application that requires fault tolerance and minimal capacity.- Benefits: Provides 100% data redundancy. Should one drive fail, the controller switches to the other drive.- Drawbacks: Requires 2 drives for the storage space of one drive. Performance is impaired during drive rebuilds. -Fault Tolerance: Yes.Block 1Block 2Block 3Block 1Block 2Block 3Motherboard Manual20 RAID 1+0:RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 1+0 solution for improved resiliency, performance and rebuild performance.Features and Benefits-Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.-Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAIDlevels in an array, and allows for spare disks.-Drawbacks: Requires twice the available disk space for data redundancy, the same as RAID level 1.-Fault Tolerance: Yes.A880G+/A785G3+21CHAPTER 5: USEFUL HELP 5.1 D RIVER I NSTALLATION N OTEAfter you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance.You will see the following window after you insert the CDThe setup guide will auto detect your motherboard and operating system. Note:If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.EXE under your optical drive.A. Driver InstallationTo install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program.B. Software InstallationTo install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program.C. ManualAside from the paperback manual, we also provide manual in the Driver CD. Click on the Manual icon to browse for available manual. Note:Y ou will need Acrobat Reader to open the manual file. Please download the latest version of Acrobat Reader software from/products/acrobat/readstep2.htmlMotherboard Manual225.2 S OFTWAREInstalling Software1. Insert the Setup CD to the optical drive. The drivers installation programwould appear if the Autorun function has been enabled. 2. Select Software Installation , and then click on the respective softwaretitle. 3. Follow the on-screen instructions to complete the installation.Launching SoftwareAfter the installation process, you will see the software icon “eHOT Line” / “BIOS Update” appears on the desktop. Double-click the icon to launch the utility.eHot-Line (Optional)eHot-Line is a convenient utility that helps you to contact with ourTech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem.Before y ou use this utility , please set Outlook Ex press as y our default e-mail client application program.This block will show the information which would be collected in the mail.Provide the e-mailaddress that you would like to send the copy to.Provide the name of the power supply manufacturer and the model no.Send the mail out.Save these information to a .txt fileExit this dialog.Select your area or the area close to you.*Provide the name ofthe memory module manufacturer. *Describe condition of your system.** represents important information that you must provide. Without this information, you may not be able to send out the mail.A880G+/A785G3+23After filling up this information, click “Send ” to send the mail out. A warning dialog would appear asking for your confirmation; click“Send ” to confirm or “Do Not Send ” to cancel.If you want to save this information to a .txt file, click “Save As…” and then you will see a saving dialog appears asking you to enter file name.Enter the file name and then click “Save ”. Your system information will be saved to a .txt file.Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. Thisinformation is also concluded in the sent mail.We will not share customer’s data with any other third parties , so please feel free to provide your system information while using eHot-Line service. If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application. Go to the following web/app/en-us/about/contact.php for gettingour contact information.Motherboard Manual24BIOS UpdateBIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system.Update BIOS with a BIOS fileClear CMOS function(Only for AWARD BIOS)Show current BIOS informationSave current BIOSto a .bin fileAWARD BIOSAMI BIOS<Backup BIOS>Once click on this button, the saving dialog will show. Choose the position to save file and enter file name. (We recommend that the file name should be English/number and no longer than 7 characters.)Then click Save .A880G+/A785G3+25<Update BIOS>Before doing this, please download the proper BIOS file from the website.For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, soplease check on Clear CMOS first.Then click Update BIOS button, adialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.After the BIOS Backup procedure, the open dialog will show for requesting the BIOS file which is going to be updated. Please choose the proper BIOS file for updating, then click on Open.The utility will update BIOS with the proper BIOS file, and this process may take minutes. Please do not open any other applications during this process.After the BIOS Update process, click on OKto restart the system.While the system boots up and the full screen logo shows, press <Delete>key to enter BIOS setup.In the BIOS setup, use the Load Optimized Defaults function and then Save and Exit Setup to exit BIOS setup. BIOS Update is completed.All the information and content above about the software are subject to be changed without notice. For better performance, the software is being continuously updated. The information and pictures described above are for your reference only . The actualinformation and settings on board may be slightly different from this manual.Motherboard Manual26 5.3 E XTRA I NFORMATIONCPU OverheatedIf the system shutdown automatically after power on system forseconds, that means the CPU protection function has been activated.When the CPU is over heated, the motherboard will shutdownautomatically to avoid a damage of the CPU, and the system may not power on again.In this case, please double check:1. The CPU cooler surface is placed evenly with the CPU surface.2. CPU fan is rotated normally.3. CPU fan speed is fulfilling with the CPU speed.After confirmed, please follow steps below to relief the CPU protection function.1. Remove the power cord from power supply for seconds.2. Wait for seconds.3. Plug in the power cord and boot up the system.Or you can:1. Clear the CMOS data.(See “Close CMOS Header: JCMOS1” section)2. Wait for seconds.3. Power on the system again.A880G+/A785G3+27BIO-FlasherBIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk.The BIO-Flasher is built in the BIOS chip. To enter the utility, press <F12> during the Power-On Self Tests (POST) procedure while booting up. Updating BIOS with BIO-Flasher1. Go to the website to download the latest BIOS file for the motherboard.2. Then, save the BIOS file into a USB pen drive or a floppy disk.3. Insert the USB pen drive or the floppy disk that contains the BIOS file to theUSB port or the floppy disk drive. 4. Power on or reset the computer and thenpress <F12> during the POST process. A select dialog as the picture on the right appears.Select the device contains the BIOS file and press <Enter> to enter the utility.5. The utility will show the BIOS files and their respective information. Select the proper BIOS file and press <Enter> then <Y> to perform the BIOS update process.6. After the update process, the utility will ask you to reboot the system.Press <Y> to proceed. BIOS update completes.z This utility only allows storage device with FAT32/16 format and single partition.zShutting down or resetting the system while updating the BIOS will lead tosystem boot failure.Motherboard Manual28 5.4 AMI BIOS B EEP C ODEBoot Block Beep CodesNumber of Beeps Description1 No media present. (Insert diskette in floppy drive A:)2“AMIBOOT.ROM” file not found in root directory of diskette inA:3 Insert next diskette if multiple diskettes are used for recovery4 Flash Programming successful5 File read error7 No Flash EPROM detected10 Flash Erase error11 Flash Program error12 “AMIBOOT.ROM” file size error13BIOS ROM image mismatch (file layout does not matchimage present in flash device)POST BIOS Beep CodesNumber of Beeps Description1 Memory refresh timer error3 Base memory read/write test error6 Keyboard controller BAT command failed7 General exception error (processor exception interrupt error)8 Display memory error (system video adapter) Troubleshooting POST BIOS Beep CodesNumber of Beeps Troubleshooting Action1, 3 Reseat the memory, or replace with known good modules.6, 7Fatal error indicating a serious problem with the system.Consult your system manufacturer. Before declaring themotherboard beyond all hope, eliminate the possibility ofinterference by a malfunctioning add-in card. Remove allexpansion cards except the video adapter.z If beep codes are generated when all other expansioncards are absent, consult your system manufacturer’stechnical support.z If beep codes are not generated when all other expansioncards are absent, one of the add-in cards is causing themalfunction. Insert the cards back into the system one at atime until the problem happens again. This will reveal themalfunctioning card.8If the system video adapter is an add-in card, replace orreseat thevideo adapter. If the video adapter is an integrated part of thesystem board, the board may be faulty.。

映泰(BIOSTAR)A880GU3 主板 (AMD 880G Socket AM3)bios设置中文说明书

A880GU3/A880GB BIOS Manual设置BIOS Setup (1)1 Main Menu (3)2 Advanced Menu (6)3 PCIPnP Menu (17)4 Boot Menu (21)5 Chips et Men u (24)6 Performance Menu (30)7 Exit Menu (38)iA880GU3/A880GB BIOS ManualBIOS Setup简介此手册介绍如何使用主板ＡＭＩ　ＢＩＯＳ　中各项设置程序。

此设置程序允许用户修改基本系统设置。

设置信息被存储至由电池供电的　ＲＡＭ（随机存取存储器）中。

这样，断电后设置仍可被保存。

无需磁盘导入程序，ＢＩＯＳ　仍可使电脑正常运行。

此系统控制许多输入和输出装置，比如：键盘，鼠标，串行接口和磁盘驱动器。

ＢＩＯＳ　将在第一时间导入程序，装载和执行操作系统。

另外，ＢＩＯＳ　也增加许多功能，如防病毒与密码保护及提供给控制整个系统的芯片组的详尽功能的特殊支持。

这部手册的余下部分将在您设定使用系统时对您提供帮助。

即插即用支持此ＡＭＩ　ＢＩＯＳ　支持即插即用１．０Ａ　版本规格。

支持ＥＰＡ绿色环保支持ＥＰＡ　绿色环保计算机的１．０３　版本。

ＡＰＭ　支持支持高级计算机电源管理（ＡＰＭ）功能的１．１＆１．２　版本。

电源管理功能由系统管理中断（ＳＭＩ）执行操作，也支持休眠和挂机电源管理模式。

同时也管理硬盘驱动器与影象监测器。

ＡＣＰＩ　支持此ＡＭＩ　ＡＣＰＩ　ＢＩＯＳ　支持高级配置和电源管理（ＡＣＰＩ）功能的１．０／２．０　版本，并为在ＡＣＰＩ　中定义的电源管理和装置配置提供ＡＳＬ　语言，ＡＣＰＩ　是由Ｍｉｃｒｏｓｏｆｔ、Ｉｎｔｅｌ和Ｔｏｓｈｉｂａ　发展定义的新一代电源，组态控制接口标准。

ＰＣＩ　总线支持支持Ｉｎｔｅｌ　ＰＣＩ　局域总线２．３　版。

1A880GU3/A880GB BIOS Manual2DRA M SupportSupported CPUsUsing Setupzz z Navigation Keys为保证主板性能最佳，大部分情形下都可运用默认ＢＩＯＳ设置。

电脑主板和显卡生产厂商简介

电脑主板和显卡生产厂商简介主板，又称母板，是决定一台电脑主机功能强弱，性能优劣的重要配件；显卡（这里指独立显卡），掌管图形处理，不占总线速度，不占用CPU，不占用内存。

安装独立显卡，能直接提升电脑的整体性能。

主板和显卡如此重要，但您又了解多少呢？下面就是各主板及显卡生产厂商的简单介绍，希望对Diyer们有所帮助。

主板的品牌有很多，一线的有华硕（ASUS）、微星（MSI）和技嘉（GIGABYTE），它们研发能力强，推出新品速度快，产品线齐全，高端产品非常过硬，不过中低端明显缩水，尤其是华硕，八百元以下的主板基本可以不用考虑。

三大厂商有一个通病，就是把主要精力放在Intel方面，对于销量相对较少的AMD平台有些漫不经心。

还有一些准一线、二线还有曾经是二线的品牌，如升技（ABIT）、精英（ECS）、映泰（BIOSTAR）、梅捷（SOYO）、富士康（FOXCONN）、英特尔（INTEL）、青云（ALBATRON）、磐正超磐手（SUPOX）等，它们某些方面略逊于一线品牌，但都具备相当的实力，也有各自的特色。

升技（ABIT）：二线厂中的龙头老大，性能强悍，超频强劲，做工用料方面丝毫不逊色于一线品牌，受到诸多DIYER的青睐。

精英（ECS）：一向只走低价路线，主板做工用料平庸，超频能力几乎等于零，附件也都是最基本的。

不过近两年精英也力图改变，推出了高端的黑炫龙系列主板，口碑不错。

映泰（BIOSTAR）：老牌的台系主板厂商，虽然先前名气不大，不过近来接连发力，其Tforce系列的超频主板得到许多DIY用户的承认，特色也比较鲜明，既有面向普通用户的实惠型的产品，也有面向DIY用户的超频产品，产品线较丰富，产品质量非常不错，价格属于中档水平。

梅捷（SOYO）：2000年以前的产品经做工精良，用料考究而著称，受到不少DIY用户的追捧，口碑很好，不过现在梅捷已经被收购，不再生产主板，现在市场上使用梅捷这个品牌的其实是大陆的商科集团，用由冠盟和DFI代工生产的主板，贴上了梅捷的牌子出售，价格一般，但口碑大不如前。

映泰主板TA75MH2_A55MH2

AMD A75 FCH 6个SATA 6Gb/s 接口支持RAID 0,1,10和AHCI
AMD A55 FCH 6个SATA 3Gb/s 接口支持RAID 0,1,10和........................................................... 1
1.1
前言 .....................................................................................................1
第五章: RAID功能......................................................... 20
5.1
操作系统 ...........................................................................................20
1.2 附件
Serial ATA 数据线 X 2 ATX 机箱后置 I/O 面板 X 1 用户手册 X 1 驱动光盘 X 1
注意: 此附件内容可能因区域或主板版本而异。
1
主板手册
1.3 主板特性
CPU 芯片组内存
存储器网络音效
USB
SPEC
Socket FM2 AMD A系列/ E2系列处理器 CPU TPD（散热设计功耗）最大值：100瓦请访问获取CPU的支持列表。
第四章: AMD双显卡技术 .............................................. 18
4.1
AMD双显卡技术介绍.......................................................................18

映泰TH55B HD官方手册

TH55B HD设置手册FCC条款依照FCC条款第15部分的规定，本装置已经通过测试并且符合Class B级数字装置的限制。

此条款限制了在安装过程中可能造成的有害射频干扰并提供了合理的防范措施。

本装置在使用时会产生无线射频辐射，如果没有依照本手册的指示安装和使用，可能会与无线通讯装置产生干扰。

然而，并不保证在特定的安装下不会发生任何干扰。

如果关闭和重新开启本设备后，仍确定本装置造成接收广播或电视的干扰，用户可以使用以下列表中的一种或多种方法来减少干扰：●重新安装或调整接收天线。

●增加本设备与接收设备之间的距离。

●连接设备连接到不同的插座以便于两个设备使用不同的回路。

●咨询经销商或富有经验的无线电工程师，以获得更多资讯。

本用户手册内容的变更，恕不另行通知，制造商没有解释的义务。

本用户手册的所有内容若有任何错误，制造商没有义务为其承担任何责任。

所有商标和产品名称均有其各自所有权。

未经过书面许可，不得以任何形式（部分或全部）复制此手册信息。

免责说明本手册内容系BIOSTAR ®知识产权，版权归BIOSTAR®所有。

我们本着对用户负责的态度，精心地编写该手册，但不保证本手册的内容完全准确无误。

BIOSTAR®有权在不知会用户的前提下对产品不断地进行改良、升级及对手册内容进行修正，实际状况请以产品实物为准。

本手册为纯技术文档，无任何暗示及影射第三方之内容，且不承担排版错误导致的用户理解歧义。

本手册中所涉及的第三方注册商标所有权归其制造商或品牌所有人。

TH55B HD设置手册防静电操作规则静电可能严重损坏您的设备，在处理主板以及其它的系统设备的时候要特别注意，避免和主板上的系统组件的不必要接触，保证在抗静电的环境下工作，避免静电放电可能对主板造成损坏，当在您的机箱中插入或者移除设备时，请保证电源处于断开状态，厂商对于不遵照本操作规则或者不遵守安全规范而对主板造成的损坏不负责。

目录第一章: 主板介绍 (1)1.1前言 (1)1.2附件 (1)1.3主板特性 (2)1.4后置面板接口 (3)1.5主板布局图 (4)第二章:硬件安装 (5)2.1中央处理器(CPU) (5)2.2风扇接头 (7)2.3系统内存 (8)2.4接口和插槽 (10)第三章：接头和跳线安装 (13)3.1跳线安装 (13)3.2安装细节 (13)第四章: T系列BIOS和软件 (18)4.1T系列BIOS (19)4.2T系列软件 (27)第五章:帮助信息 (35)5.1驱动程序安装注意事项 (36)5.2附加信息 (37)5.3 AMI BIOS铃声代码 (38)5.4问题解答 (39)目录BIOS设置 (40)1主菜单 (42)2高级菜单 (47)3 PCI PNP菜单 (59)4系统引导菜单 (61)5芯片组菜单 (63)6 O.N.E菜单 (66)7退出菜单 (75)附：产品中有毒有害物质或元素的名称及含量 (78)TH55B HD 第一章: 主板介绍1.1 前言感谢您选购我们的产品，在开始安装主板前，请仔细阅读以下安全指导说明：⏹请选择清洁稳定的工作环境。

映泰AMI BIOS Update指导说明

4 映泰AMI BIOS Update指导说明DOS下共有二种Update BIOS的方法：注意：AMD主板更新BIOS前，如有开核或超频，请先导入CMOS出厂默认值后在进行更新BIOS 动作，否则可能刷新后不开机！1. F12 主板自带更新方式(推荐使用）2. AFUDOS (DOS下更新刷BIOS)分别说明如下:1. Press F12 for BIOS POST Flash1-1. 开机时可按F12进入BIOS POST Flash1-2. Select drive,依配备选择U pdate BIOS装置来源,例如：USB ZIP或Floppy..等1-3. 选择要update 的BIOS,并注意M odel Name及Chipset是否正确1-4. 询问是否确定要U pdate : Are you sure to flash BIOS (Y/N)? Y (按Y)1-5. 询问是否清除D MI资料：Erase DMI Date (Y/N) ? Y (按Y)1-6. 开始Update BIOS1-7. Update BIOS完成,询问是否要重开机：BIOS Flash done,Reset system (Y/N)? Y(按Y)若Update过程中无当机、重开机后无错误讯息或无不正常开机现象,即完成Update BIOS2. AFUDOS (AMI Firmware Update Utility)2-1. 执行afudos来update bios, 输入afudos 空一格+ BIOS完整檔名,按Enter 后执行2-2. Erasing flash2-3. Writing flash2-4. Verifying flash2-5. Program ended normally完成Update BIOS,并顺利开到A:\>下,Update过程中无当机或错误讯息,即完成Update BIOS注意！以上方法只用于AMI BIOS系列主板5 AMI BIOS刷新失败后的自救方法部份客户在刷新BIOS失败无法正常开机的情况，以往只能通过返修的方式去解决。

映泰主板H77MU3中文说明书

第二章: 硬件安装 ........................................................... 6
2.1
中央处理器(CPU) ..............................................................................6
2.4
接口和插槽 .......................................................................................11
第三章: 接头和跳线安装............................................... 14
如果关闭和重新开启本设备后，仍确定本装置造成接收广播或电视的干扰，用户可以使用以下列表中的一种或多种方法来减少干扰：
重新安装或调整接收天线。增加本设备与接收设备之间的距离。连接设备连接到不同的插座以便于两个设备使用不同的回路。咨询经销商或富有经验的无线电工程师，以获得更多资讯。
2.2
风扇接头 .............................................................................................8
2.3
系统内存 .............................................................................................9
x2
支持 PCI-E Gen2 x1扩展卡
板载接口
SATA3接口
x2
每个接口支持1个SATA3设备

biostar映泰简介

八月，映泰TA870U3+率先在速龙II X4 640T上成功开启六核，引发新一轮开核热潮！
APU时代：3D过万，155外频辉煌
2011年7月，映泰在全新AMD APU FM1平台继续T系列超频的辉煌，TA75M+超频突破 155外频，超频幅度到达55%，U载集显性能到达3D06 1万多分，3D Vantage 8700多分，超频下的映泰TA75集显平台，完全到达中等独显性能
T系列
T系列玩家主板
定位：超频玩家、游戏玩家、高清玩家、网吧用户特性：超频、游戏、节能、超值产品：ATX/MATX标准尺寸，黑色PCB，全固态电容，热管/增强散热、完整硬件规格，丰富接口和软件应用、超频，遥控，快充应用。
稳定系列
映泰主板，稳定之选
定位：入门用户，网吧用户特性：稳定、超值产品：ATX/MATX精简尺寸，黑色PCB ，供电固态, 电容、普通散热、标准硬件规格，实用接口,局部拥有遥控，快充应用
Intel优秀合作伙伴奖牌
AMD最正确配合厂商奖牌
nVIDIA最正确合作伙伴奖牌
权威的产品硬件认证和软件认证
INTEL官方网站有关映泰认证
AMD官方网站有关映泰认证
微软官方网站有关映泰认证
国际、国内映泰产品奖项
映泰品牌行销于全球市场，获得世界各国权威媒体的好评，包括美国、英国、德国、日本、俄罗斯等几十个国家和地区的荣誉奖项。
映泰简介
2011年10月
映泰大事记
1986年映泰公司成立 1999年映泰股票在台湾上市 2001年以自有品牌进入中国市场 2002年主板出货量位于全球主板五强之列 2005年推出T系列玩家超频主板 2006年映泰取得中国网吧市场主板占有率第一名

映泰TA880G HD说明书

感谢您选购我们的产品，在开始安装主板前，请仔细阅读以下安全指导说明：
1.2

附件
IDE 数据线 X 1 (可选) Serial ATA 数据线 X 3 Serial ATA 电源线 X 1 ATX 机箱后置 I/O 面板 X 1 用户手册 X 1 驱动光盘 X 1 FDD 数据线 X 1 (可选) USB 2.0 数据线 X1 (可选) S/PDIF 输出数据线 X 1 (可选)
® ® ®
TA880G HD 设置手册防静电操作规则
静电可能严重损坏您的设备，在处理主板以及其它的系统设备的时候要特别注意，避免和主板上的系统组件的不必要接触，保证在抗静电的环境下工作，避免静电放电可能对主板造成损坏，当在您的机箱中插入或者移除设备时，请保证电源处于断开状态，厂商对于不遵照本操作规则或者不遵守安全规范而对主板造成的损坏不负责。
AMD 880G
芯片组
AMD SB850
环境控制 ITE 8721 H/W 监控高级I/O控制器提供最基本的 I/O功能风扇速度控制器低脚位接口 ITE's "智能保护" 功能 DDR3 DIMM 插槽 x 4 主内存最大内存容量为16GB 每个DIMM支持512MB/1GB/2GB/4GB DDR3 双通道模式DDR3内存模块支持DDR3 800 / 1066 / 1333 支持DDR3 1600 (OC) 最大共享显存为512 MB 显卡 AMD 880G (Radeon HD4250) 板载side port 128MB DDR3 支持DVI/HDMI/UVD/HDCP 数据传输率为6 Gb/s SATA III 集成串行ATA控制器符合SATA 3.0 规范支持RAID 0,1,5,10 10 / 100 Mb/s / 1Gb/s自适应传输模式网络 Realtek RTL8111E 半双工/全双工工作模式 8声道音频输出音效 ALC892 支持高清音频 PCI 插槽插槽 PCI Express Gen2 x1 插槽 PCI Express Gen2 x16 插槽 x2 x1 x1 支持 PCI 扩展卡支持 PCI-E Gen2 x1 扩展卡支持 PCI-E Gen2 x16 扩展卡

映泰TA870使用手册

第二章: 硬件安装 ........................................................... 5
2.1
中央处理器(CPU) ..............................................................................5
2.2
风扇接头 .............................................................................................6
2.3
系统内存 .............................................................................................7
如果关闭和重新开启本设备后，仍确定本装置造成接收广播或电视的干扰，用户可以使用以下列表中的一种或多种方法来减少干扰：
重新安装或调整接收天线。
增加本设备与接收设备之间的距离。
连接设备连接到不同的插座以便于两个设备使用不同的回路。
咨询经销商或富有经验的无线电工程师，以获得更多资讯。
本用户手册内容的变更，恕不另行通知，制造商没有解释的义务。
6.1
驱动程序安装注意事项 ...................................................................40
6.2
附加信息 ...........................................................................................41

映泰主板设置手册B75MU3B

2.4
接口和插槽 .......................................................................................10
第三章: 接头和跳线安装............................................... 13
（取决于CPU）插槽
PCI 插槽
支持 PCI-E Gen3 x16扩展卡 x1
x1
支持 PCI扩展卡
PCI -E Gen2 x 1 插槽
x1
支持 PCI-E Gen2 x1扩展卡
板载接口
SATA3接口
x1
每个接口支持1个SATA3设备
SATA2接口
x3
每个接口支持1个SATA2设备
前置面板接口
x1
CE 符合性简短声明我们声明此产品符合现行标准，并满足 2004/108/CE， 2006/95/CE 和 1999/05/CE 指令规定的所有基本要求。
B75MU3B 设置手册
防静电操作规则
静电可能严重损坏您的设备，在处理主板以及其它的系统设备的时候要特别注意，避免和主板上的系统组件的不必要接触，保证在抗静电的环境下工作，避免静电放电可能对主板造成损坏，当在您的机箱中插入或者移除设备时，请保证电源处于断开状态，厂商对于不遵照本操作规则或者不遵守安全规范而对主板造成的损坏不负责。
3.1
跳线安装 ...........................................................................................13
3.2
安装细节 ...........................................................................................13

映泰科技主板说明书

manual
ASRock DuraCap (2.5 x longer life time), 100% Japan made high quality conductive polymer capacitors Digi Power, Supports AM3+ Processor, 8-Core CPU Supports Dual Channel DDR3 2100(OC) Supports AMD Quad CrossFireX™, 3-Way CrossFireX™ and CrossFireX™ Supports NVIDIA® SLI™ 4 x USB 3.1 Gen1, 5 x SATA3, 2 x IEEE 1394, Dr. Debug, Power/Reset/Clear CMOS Switch with LED 7.1 CH HD Audio with Content Protection (Realtek ALC892 Audio Codec) Supports ASRock XFast RAM, XFast LAN, XFast USB Technologies Supports Graphical UEFI, On/Off Play, Instant Boot, Instant Flash, APP Charger, Turbo UCC, APP Shop Free Bundle : CyberLink MediaEspresso 6.5 Trial This model may not be sold worldwide. Please contact your local dealer for the availability of this model in your region. - Support for Socket AM3+ p

映泰890GXE主板中文说明

TA890GXE/TA880GXE设置手册FCC条款依照FCC条款第15部分的规定，本装置已经通过测试并且符合Class B级数字装置的限制。

此条款限制了在安装过程中可能造成的有害射频干扰并提供了合理的防范措施。

本装置在使用时会产生无线射频辐射，如果没有依照本手册的指示安装和使用，可能会与无线通讯装置产生干扰。

然而，并不保证在特定的安装下不会发生任何干扰。

●增加本设备与接收设备之间的距离。

●连接设备连接到不同的插座以便于两个设备使用不同的回路。

●咨询经销商或富有经验的无线电工程师，以获得更多资讯。

本用户手册内容的变更，恕不另行通知，制造商没有解释的义务。

本用户手册的所有内容若有任何错误，制造商没有义务为其承担任何责任。

所有商标和产品名称均有其各自所有权。

未经过书面许可，不得以任何形式（部分或全部）复制此手册信息。

免责说明本手册内容系BIOSTAR ®知识产权，版权归BIOSTAR®所有。

我们本着对用户负责的态度，精心地编写该手册，但不保证本手册的内容完全准确无误。

BIOSTAR®有权在不知会用户的前提下对产品不断地进行改良、升级及对手册内容进行修正，实际状况请以产品实物为准。

本手册为纯技术文档，无任何暗示及影射第三方之内容，且不承担排版错误导致的用户理解歧义。

本手册中所涉及的第三方注册商标所有权归其制造商或品牌所有人。

TA890GXE/TA880GXE设置手册防静电操作规则静电可能严重损坏您的设备，在处理主板以及其它的系统设备的时候要特别注意，避免和主板上的系统组件的不必要接触，保证在抗静电的环境下工作，避免静电放电可能对主板造成损坏，当在您的机箱中插入或者移除设备时，请保证电源处于断开状态，厂商对于不遵照本操作规则或者不遵守安全规范而对主板造成的损坏不负责。

映泰主板怎么样

映泰主板怎么样介绍映泰（ASRock）是一家致力于电子产品研发和制造的公司，主要生产主板、工作站、服务器以及相关的配件。

其中，映泰主板被广大用户所认可和使用。

在市面上选择主板时，很多用户会关注映泰主板的性能、性价比以及可靠性。

本文将从这些方面入手，介绍映泰主板的特点和优势。

1. 性能映泰主板在性能方面表现出色。

它采用独特的技术和设计，能够支持高速的数据传输和处理能力。

不论是日常办公还是进行复杂的游戏和多媒体处理，映泰主板都能保证稳定的性能。

2. 性价比映泰主板的性价比非常高。

相对于一些知名品牌主板，映泰主板具有更具竞争力的价格。

尽管价格较低，但它仍然能提供出色的性能和稳定性。

3. 可靠性映泰主板以其稳定性而著名。

它经过严格的品质控制和测试，能够在长时间使用中保持出色的稳定性。

此外，映泰的售后服务也非常优秀，用户在使用过程中遇到问题可以得到及时的支持和解决。

4. 可升级性映泰主板具备很好的可升级性。

用户可以根据自己的需求，随时升级主板上的各项硬件和组件。

这使得用户在不更换主板的情况下，能够持续提升设备的性能。

5. 多样的选择映泰主板提供了多样的选择，以满足不同用户的需求。

无论你是普通用户、游戏玩家还是专业设计师，都能够找到适合自己需求的映泰主板。

从入门级到高端级别，映泰主板的产品线非常完善。

6. 兼容性映泰主板具备很好的兼容性，支持多种操作系统和设备。

这使得用户可以轻松地安装和使用不同的硬件和软件，确保设备的正常运行。

7. 反馈和评价根据用户的反馈和评价，映泰主板受到了普遍的认可和好评。

用户们称赞它的性能和稳定性，并对映泰的售后服务给予了高度评价。

用户对映泰主板的好评是映泰不断努力和改进的最好证明。

总的来说，映泰主板以其出色的性能、良好的稳定性和合理的价格，成为众多用户的首选。

无论在日常使用还是专业领域，映泰主板都能满足用户的需求。

如果你正在寻找一块性价比高且可靠稳定的主板，映泰主板是一个很好的选择。

看编号识主板-映泰篇

映泰的主板产品在名气上虽没有华硕、微星等一线厂商那么响亮，但在超频用户中有着不错的口碑。

虽然受定位和成本影响，其主板在做工及用料上没有一线厂商那么吸引眼球，不过简易而实用的超频设计赢得了不少消费者的喜爱，树立了映泰“准一线”厂商的地位。

比起一线厂商，映泰的主板数量不是很多，相对的型号也就没那么复杂。

总体看映泰将旗下产品分为三大系列：定位高端超频的T-POWER系列、定位中端主流的T系列以及入门级超值系列。

不过其在命名上也不是很规范化，部分编号也有多个意思，给消费者在辨识和购买上带来一定麻烦。

超值系列由于定位较低，编号上比较简单，这里我们重点对TPOWER 和T系列进行解析。

T-POWER系列规则T-POWER作为映泰的顶级系列，基本上以Intel主板为主，板型上为大尺寸A TX，采用黑色PCB全固态电容的设计，整体规格较高，散热和超频功能也很强。

虽然在整体做工和用料上不及一线品牌的豪华主板，但较高的性价比对于追求实用超频的玩家也是不错的选择。

除了我们熟知的T-POWER I45，还有X58和P55两个芯片组的产品。

由于数量不多，型号也不复杂，命名上也是简单的三段式。

系列号-芯片组厂商芯片组版本号TPOWER-45ITPOWER-I55TPOWER-X58TPOWER-X58A编号“I”表示Intel，而“45”和“55”就是我们熟知的P45和P55主板，其中X58主板有两款，版本号为“A”的部分规格有所精简，去掉了热管散热的设计。

T系列规则映泰真正的主力产品还是T系列，覆盖了主流芯片组，型号众多。

T系列主要定位于主流性价比市场，总体相对TPOWER有不少精简，特别是在散热和供电用料方面。

其中带有“XE”后缀的采用了全固态电容，而普通的T系列产品只在CPU供电部分保留了全固态设计，购买时要区分清楚。

总的来说T系列虽然在用料方面中规中矩，但在超频方面表现还是比较突出的，不失为实惠的选择。

T系列的命名以“ABC-D”或“ABC D”的形式表示，有时C、D编号也会省略。

映泰TZ77XE4主板说明书

2.2
风扇接头 ..........ቤተ መጻሕፍቲ ባይዱ..................................................................................8
2.3
系统内存 .............................................................................................9
第六章: 帮助信息 ......................................................... 43
6.1
驱动程序安装注意事项 ...................................................................43
5.1
T系列UEFI BIOS .............................................................................27
5.2
T系列软件 ......................................................................................... 30
SATA 2 & 3 集成串行ATA控制器
网络
Realtek RTL 8111E
音效
ALC898
环境控制 H/W 监控风扇速度控制器 ITE's "智能保护" 功能双通道模式 DDR3内存模组支持DDR3 1066 / 1333 / 1600 支持DDR3 1866(OC) / 2133(OC) / 2400(OC) 不支持Registered DIMM和ECC DIMM 数据传输率为3.0 Gb/s / 6.0 Gb/s 符合SATA 2.0 / 3.0 规范支持RAID 0,1,5,10, SRT 10 / 100 Mb/s / 1Gb/s自适应传输模式半双工/全双工工作模式 8声道音频输出支持高清音频

映泰H61主板简单介绍

映泰H61主板简单介绍作者：H61主板来源：/映泰H61主板采用黑色PCB小板设计，采用英特尔最新H61芯片组，支持最新的Socket1155接口处理器，供电部分，映泰H61MLC采用5相供电设计，全固态100%X.D.C 固态电容。

内存方面，映泰H61MLC主板提供2条DIMM插槽，支持双通道DDR3-1333/1066MHz，最大支持16GB。

磁盘方面，映泰H61MLC提供了4个SATA2磁盘接口，可以满足用户的基本应用了。

扩展插槽方面，映泰H61MLC主板提供了1条PCI-E x16 2.0显卡插槽，另外还有2条PCI-E插槽。

输出方面，映泰H61MLC主板拥有丰富的I/O接口，2个USB2.0+PS/2，VGA、RJ45千兆网卡+音频接口。

主板芯片集成芯片声卡/网卡芯片厂商Intel主芯片组Intel H61芯片组描述采用Intel H61芯片组显示芯片CPU内置显示芯片(需要CPU支持音频芯片集成VIA VT1708B6声道音效芯片网卡芯片板载Realtek RTL8105E百兆网卡处理器规格CPU平台IntelCPU类型Core i7/Core i5/Core i3CPU插槽LGA1155CPU描述CPU TDP(Thermal Design Power)最大支持95瓦特支持CPU数量1颗内存规格内存类型DDR3内存插槽2×DDR3DIMM最大内存容量16GB内存描述支持双通道DDR3 1333/1066MHz内存扩展插槽显卡插槽PCI-E2.0标准PCI-E插槽1×PCI-E X16显卡插槽1×PCI-E X1插槽SATA接口4×SATA II接口I/O接口USB接口8×USB2.0接口外接端口1×VGA接口PS/2接口PS/2鼠标，PS/2键盘接口并口串口1个串口其它接口1×RJ45网络接口音频接口板型主板板型Micro ATX板型外形尺寸22.6×17.5cm其它参数电源插口一个4针，一个24针电源接口供电模式四相其他特点支持Windows XP/Vista/7操作系统主板附件包装清单映泰主板x1SATA数据线x2机箱I/O面板x1驱动光盘x1快速指南x1编辑点评：映泰H61MLC采用了全固态用料设计，Micro ATX板型设计可以用较小的机箱来安装此款主板，可以节省空间，这款产品目前仅仅报价529元，超值非凡，搭配G620等入门级SNB处理器绝对是性价比之选.。

E5系超频教程之映泰(Biostar)TP43D2-A7设置

下面全部过程均以清空BIOS后的默认状态为准，在此基础上对其进行更改设定，请注意。

除超频选项页面附单独说明外，其他页面改变选项均以红框标注。

这次超频的主角--映泰TP43D2-A7，U是E5200～适用于映泰P43系列的还有E5系我搭的超频平台，CPU散热器使用的是TUNIQ TOWER 120，由于北桥是完全被动散热的铝质散热片，为获得较好的超频结果，我放了个12公分的风扇上去。

温度在超频中一定要特别注意，能够加强散热千万别懒。

由于主板已经附带了EZTOUCH的按键，超频过程非常简单。

通过跳线CLR CMOS开机，此时按DEL键已经无效，请看屏幕最下方的提示，按F1进入BIOS。

设定正常后，可通过按下DEL进入BIOS。

BIOS主页面。

软驱设定默认为ENABLED，设定为DISABLED关闭软驱。

第二个页面，ADVANCED，这里的选项很多，包括了CPU功能等众多内容，我只提供发生变更设定的图片，若未有说明，则表示按原默认设置即可。

CPU功能设定，除了CORE MULTI-PROCESSING设定ENABLED不变外，其他全部设定为DISABLED。

SUPER IO CHIPSET设定选项中关闭软驱控制器，第一个ONBOARD FLOPPY CONTROLLER设定为DISABLED。

USB 2。

0的设定，由于存在HISPEED与FULLSPEED之分，建议设定为HISPEED。

高级选项中最后一个子选项板载PCI/PCI-E设备的配置，全部设定为DISABLED，目的为关闭板载PATA控制器与PCI-E网卡控制器。

在CHIPSET选项中可以看到，仍按南北桥分成了两大块，一个一个去看一下。

北桥设定选项中内存重映射（MEMORY REMAPPING FEATURE）如你的内存容量为2GB设定为DISABLED，如果大于3GB则设定为ENABLED。

南桥设定中，HDA CONTROLLER设为DISABLED，关闭音频控制芯片。

映泰H61MLC2参数

映泰H61MLC2参数规格查看：更多信息或更多图片主板芯片集成芯片声卡/网卡芯片厂商Intel主芯片组Intel H61芯片组描述采用Intel H61芯片组显示芯片CPU内置显示芯片(需要CPU支持)音频芯片集成6声道音效芯片网卡芯片板载百兆网卡处理器规格CPU平台IntelCPU类型Core i7/Core i5/Core i3/Pentium/CeleronCPU插槽LGA 1155CPU描述支持Intel 22/32nm处理器支持CPU数量1颗内存规格内存类型DDR3内存插槽2×DDR3 DIMM最大内存容量16GB内存描述支持双通道DDR3 1600MHz内存扩展插槽显卡插槽PCI-E 3.0标准PCI-E插槽1×PCI-E X16显卡插槽1×PCI-E X1插槽SATA接口4×SATA II接口I/O接口USB接口8×USB2.0接口（4内置+4背板）外接端口1×VGA接口PS/2接口PS/2鼠标，PS/2键盘接口其它接口1×RJ45网络接口音频接口板型soyoi主板板型Micro ATX板型外形尺寸22.6×17.0cm其它参数音频特效不支持HIFI电源插口一个4针，一个24针电源接口其它特点支持Windows XP/Vista/7操作系统主板附件包装清单映泰主板 x1 SATA数据线 x2 机箱I/O面板 x1 驱动光盘 x1快速指南 x1保修信息保修政策享受三包服务质保时间3年质保备注3月包换，3年免费保修客服电话9510-5530详细内容在正常使用情况下，映泰对所售出的产品实行三包服务。

包退：从产品购买之日起7天内，如果产品出现性能故障，可到原购买地退换；包换：从购买之日起至3个月以内，映泰公司保换同级堪用良品；包修：从购买之日起3个月后至第1年以内，用户享有对该产品的全年免费保修，并实行3年内有偿包修，后两年内有偿包修。

映泰主板bios设置图解教程

映泰主板bios设置图解教程
映泰主板bios设置映泰主板怎么样重启电脑，按DEL进⼊Award Bion 4.51PG界⾯，⽤功能键区⽅向键选第⼆⾏“BIOS FEATURES SETUP”(BIOS功能设定)，回车进⼊BIOS FEATURES SETUP界⾯，映泰主板bios设置找到第七⾏“BOOT SEQUENCE”，⽤pgup或pgdn把它右边显⽰的A，C，换成CDROM，C，A，按ESC，按F10，按Y，保存退出。

这样就完成bios启动优先项了。

映泰主板bios设置映泰主板怎么样如下图
映泰主板bios设置(图)映泰主板怎么样
映泰主板怎么样开机时直接进⼊BIOS的主要原因是BIOS的设置出现了问题。

有些电脑的主板在设置的时候为了能够更加⼈性化所以加⼊了许多其他的功能。

当BIOS的设置不正确时重启电脑就会⾃动进⼊BIOS。

解决映泰主板bios设置⽅案：
既然是BIOS的设置引起的，那么只需要在BIOS⾥⾯设置好就可以解决问题了。

当电脑开机进⼊BIOS后，选择Load Fail-safe Defaults、Load Optmized Defaults、Restore Defaults等类似字样的选项,选择完毕后按下“F10”保存并退出即可映泰主板bios 设置。

总结
以上所述是⼩编给⼤家介绍的映泰主板bios设置图解教程，希望对⼤家有所帮助，如果⼤家有任何疑问请给我留⾔，⼩编会及时回复⼤家的。

在此也⾮常感谢⼤家对⽹站的⽀持！。