(完整版)进口合同.docx

WOODCHIP SUPPLY AGREEMENT Contract No :

合同号

Date :

日期 :

Buyer :

买方：

Address :

地址：

Tel 电话 :

Fax 传真 :

E-mail :

Seller :

卖方

Address :

地址：

Tel 电话 :

Fax 传真 :

E-mail :

By this agreement the Seller agrees to sell and deliver to the Buyer, and the

Buyer agrees to buy and take delivery of woodchip, subject to and on the following terms

and conditions:

按照合同规定，卖方同意卖给买方，买方同意购买卖方此合同中捕述的木片，具体

条款如下：

1.DEFINITIONS（定义）

Unless the context otherwise requires, the following terms shall have the meanings

respectively assigned to them:

除非本合同中另有要求，否则下利术语分别定义如下：

“ Arrived means” having set anchor in the custom or designated waiting area at

the loading point.

“抵达” 指在装货港的海关或指定的区域拋锚。

“ BDMT” means bone dry metric tonne of 1,000 kilograms of wood.

“ BDMT”指 1000 千克绝干吨木材。

“ Dollars ” and “ cents ” means respectively dollars and cents in the lawful currency of the United States of America.

“美元”和“美分”分别指美国法定贷币的美元和美分。

“ FOBST指”卖方负担理舱和平舱的费用。

“ Force majeure ” means any of the acts or events described in Clause 10.

“不可抗力“找第10 条款所述的情况或出现的时件。

“ GMT” means green metrictonne of 1,000 kilograms weight of green or undried chips.

“ GMT”指 1000 千克鲜木片的重量。

“ Hardwood chip ” means chip prepared by the Seller at its mill for the production of pulp and paper.

“硬木片”指卖方生产的用于制浆造纸的木片。

“ LAYCAN” meansthe time period during which the vessel carrying the cargo under

this agreement is nominated to arrive at the loading port.

“ LAYCAN指”船制装载本合同中确定的货物指定到达装船港的时间。

“ Loading port ” means Seller ’ s woodchip loading wharf at Goksichang Port.

“装船港”指卖方在泰国郭诗仓港口。

2.QUANTITIES AND PERIOD数(量和期限 )

2.1 Quality and Quantity （质量和数量）

Supply 20,000 BDMT+/-5% of Eucalyptus wood chip. (5 Percent tolerance is allowed) 供应数量为，+/-5的桉木木片（充许 5%的港短装）。

2.2. (Latest date of shipment) 最晚装运日期：

Within 45 days after the Seller receive L/C issued by the Buyer.

卖方收到由买方开出的信用证后 45 日内装运。

3．SPECCIFICATIONS规格( )

3.1 Chips will consist of wood from Thailand Eucalyptus woodchip.

木片品种为泰国桉木木片。

3.1.1 Size（尺寸）

-A maximum of 5% of chips shall be in excess of 28.6 mm in length.

-A minimum of 90% of chips shall be between 4.8 mm and 28.6 mm.

-A maximum of 4% of chips shall be less than 4.8 mm in length.

-Chips will contain maximum 1.0% bark and rot and nil charcoal.

长度大于 28.6 毫米的木片不超过5%

长度 4.8 毫米 - 28.6 毫米不小于 90%

长度小于 4.8 毫米的木片不超过3%

木片中树皮和磨朽含量不超过 1.0%，且不含有木灰。

3.1.2 Contamination（杂质）