海明斯德谦产品说明
海明斯德谦化学助剂
海明斯德谦化学助剂
（实用版）
目录
1.海明斯德谦化学助剂简介
2.海明斯德谦化学助剂的产品种类
3.海明斯德谦化学助剂的应用领域
4.海明斯德谦化学助剂的优势
5.海明斯德谦化学助剂的未来发展
正文
海明斯德谦化学助剂是一种在工业生产中广泛应用的化学物质，具有重要的作用。
本文将从以下几个方面详细介绍海明斯德谦化学助剂：产品种类、应用领域、优势以及未来发展。
首先，海明斯德谦化学助剂的产品种类繁多，涵盖了多个领域。
其中包括涂料助剂、塑料助剂、橡胶助剂、油墨助剂等。
这些助剂在各自的领域中发挥着关键作用，为工业生产提供了有力支持。
其次，海明斯德谦化学助剂的应用领域广泛。
在涂料、塑料、橡胶、油墨等行业中，都可以看到海明斯德谦化学助剂的身影。
这些助剂能够提高产品质量、改善生产工艺，为企业带来显著的经济效益。
再者，海明斯德谦化学助剂具有许多优势。
例如，它们具有优良的性能稳定性，能够在各种严苛的生产条件下保持稳定性能；同时，这些助剂还具有高效的功能性，能够有效改善生产过程中的各种问题；此外，海明斯德谦化学助剂还具有环保性，使用这些助剂可以降低生产过程中对环境的影响。
最后，面对未来，海明斯德谦化学助剂将继续保持创新，研发出更多具有高性能、环保特性的助剂产品，以满足社会发展的需求。
在未来的发
展中，海明斯德谦化学助剂将继续为工业生产提供有力支持，推动我国工业发展水平的不断提高。
总之，海明斯德谦化学助剂以其优良的性能、广泛的应用领域和环保特性，在工业生产中发挥着重要作用。
Endress+Hauser Levelflex FMP54 FMP57产品说明说明书
Products Solutions ServicesSpecial documentation Levelflex FMP54/FMP57Guided wave radarRod extension / Centering HMP40SD01002F/00/EN/13.1571283493Usage Levelflex FMP54/FMP572Endress+Hauser1 UsageWhen the Levelflex is installed in nozzles DN40-250 (1-1/2" - 10") with a nozzle height > 150mm/6", there is the risk of the probe touching the bottom edge of the nozzle due to material movement in the container and this can result in malfunctioning. For this reason it is necessary to use an extension rod with or without a centering disk to avoid the contact.This accessory consists of the extension rod (2) corresponding to the nozzle height (1), on which a centering disk (3) is also mounted if the nozzles are narrow orwhen working in bulk solids.A0013597When ordering Levelflex please note that the probe length minus the length of theextension rod is ordered as otherwise the rope would have to be shortened.Only use centering diks withs small diameters (DN40/DN50) if there is no significant build-up in the nozzle above the disk. The nozzle must not become clogged.2 Technical data Admissible temperature range (without center washer)no restrictionsAdmissible temperature range (with center washer)–40 to 150 °C (–40 to 302 °F) at the lower edge of the nozzle. 1)Material of extension rod 1.4404 (316L)Material of centering diskPPS GF401)There may be further restrictions depending on the process seal of the Levelflex. Please refer to the corresponding Technical Information: TI01001F (FMP54), TI01004F (FMP57).Levelflex FMP54/FMP57Ordering information Endress+Hauser 33Ordering information 3.1 Scope of delivery•1 extension rod with 2 internal threads M10x1 (with or without center disk, depending on the order)•1 setwcrew M10x1•2 sets of Nord-Lock washers •Mounting instructions (this document)Mounting Levelflex FMP54/FMP574Endress+Hauser4 MountingAWithout rod extension/centering HMP40BWith rod extension/centering HMP401Counter nut 2Rope connection 3Nord-Lock washers (two sets containing two washers each)4Extension rod (with or without center disk, depending on the order)5Setscrew M10x14.1 Required tools•1 open-end wrench SW14 (14 AF)•1 torque wrench SW14 (14 AF)Levelflex FMP54/FMP57MountingEndress+Hauser 54.2 Unmounting the rope probe 1.Open the setscrew connection between the counter nut (1) and the rope connection (2)using two wrenches (AF14).2.Unscrew the probe with the rope connection (2) from the setscrew of the device.4.3 Mounting the extension rod 1.Carefully tighten the counter nut (1) until the stop at the setscrew of the device.2.Screw the extension rod (4) with a set of Nord-Lock washers (3) into the setscrew of the device and tighten firmly using an open-end wrench and a torque wrench. The maximum torque of 15 Nm must be observed!3.Screw the setscrew (5) into the extension rod (4) until the stop.4.Use the second set of Nord-Lock washers (3) to screw down the rope connection (2) at the setscrew (5) of the extension rod and tighten the screw connection with the aid of an open-end wrench AF14 and a torque wrench. The maximuim torque of 15 Nm must be observed!4.4 If required: Shorten the rope probeInstructions for shortening the rope probe can be found in the Levelflex Operating Instructions:•FMP54: BA01001F (HART); BA01006F (PROFIBUS PA); BA01052F (FOUNDATION Fieldbus)•FMP57: BA01004F (HART); BA01009F (PROFIBUS PA); BA01055F (FOUNDATION Fieldbus)Commissioning of the Levelflex Levelflex FMP54/FMP576Endress+Hauser5Commissioning of the Levelflex 5.1 Probe length correctionAfter mounting the extension rod, an automatic or manual probe length correction must be performed. This is done with the aid of the following submenu in the operating menu of the Levelflex.Setup → Advanced setup → Probe length correctionFor details refer to the Levelflex Operating Instructions:•FMP54: BA01001F (HART); BA01006F (PROFIBUS PA); BA01052F (FOUNDATION Fieldbus)•FMP57: BA01004F (HART); BA01009F (PROFIBUS PA); BA01055F (FOUNDATION Fieldbus)5.2 SetupAfter mounting the extension rod, a new calibration of the measuring point is required in any case. This is performed by means of the Setup submenu.When doing so, it is especially important that the full distance F (Parameter Full calibration )does not range into the nozzle.For details refer to the Levelflex Operating Instructions:•FMP54: BA01001F (HART); BA01006F (PROFIBUS PA); BA01052F (FOUNDATION Fieldbus)•FMP57: BA01004F (HART); BA01009F (PROFIBUS PA); BA01055F (FOUNDATION Fieldbus)5.3 Interference echo suppression (mapping)After mounting the extension rod, a mapping curve must also be recoreded again. This is performed by the Setup → Mapping submenu. The mapping distance (Parameter Mapping end point ) must at least be the nozzle height plus 20 cm (8").5.4 Setting the upper blocking distanceThe upper blocking distance must be equal to or longer than the nozzle height. It is defined in the follwing parameter:•For level measurements:Setup → Advanced setup → Level → Blocking distance •Bei Trennschichtmessungen:Setup → Advanced setup → Interface → Blocking distance*71283493*71283493。
德谦海明斯羟基丙烯酸树脂说明书
Hypomer FS-2050 羥基丙烯酸樹脂與不黃變 的異氰酸酯（HDI）固化劑搭配﹐可製成施工性能 好﹑鋁粉排列佳﹑配套性能優異的丙烯酸聚氨酯鋁 粉漆。
參考配方
組份 A
重量%
Hypomer FS-2050 羥基丙烯酸樹脂
50.0
非浮型鋁漿
6.0
Levaslip 432 流平劑
0.3
DeuRheo 201P 流變助劑
將以上配方中樹脂、CAB 溶液、流平劑、流 變助劑、溶劑先用快速攪拌分散均勻，最後加入分 散過濾好的鋁粉，用低速攪拌使之均勻即可包裝。
Hypomer FS-2061 鋁粉漆性能（乾燥條件：80℃
烘烤 30 分鐘）
幹性100 μm 溼膜
附著力﹐級 (ISO2409) 鉛筆硬度* (無痕標準） 相容性* 耐水性(40℃，10
稀釋劑：二甲苯／醋酸丁酯／醋酸乙酯／PMAc＝ 50／28／7／15
注 ：不同的施工工藝對塗膜的乾燥會有不同的要求，同 時氣候的變化也會影響到漆膜的乾燥性能，客戶可 根據需求對稀釋劑加以調整。
Hypomer FS-2060A 各色漆對各類金屬的附著力 性能
附著力，級(80℃ 烘烤 1 小時後，靜置 3 天測性
參考配方
組份A
重量%
Hypomer FS-2060B 羥基丙烯酸樹脂 40.0
Ti-Pure R902 鈦白粉
20.0
超細滑石粉（1250 目）
9.0
輕質碳酸鈣
11.0
Disponer 9250 潤濕分散劑
1.0
Levelol 835 流平劑
0.5
DeuRheo 202P 流變助劑
1.0
稀釋劑
17.5
能) (ISO2409)
海斯特FORTENSH6.0FT产品说明书
TECHNICAL GUIDEH6.0-8.0FT SERIES2DIMENSIONS h 1sßαh 4h 3h 6m 1h 10yxlc l 1Q1l 5m 2h 7l 2b 2b 1b 11eb 10b 13Wab 5a/2Asta/2H6.0-7.0FTCENTRE OF GRAVITY3h 6h 10h 7y xll 1l 2l 5m 2m 1h 1c Q1sßαh 4h 3b 1b 2b 10b 5eb 13b 11Waa/2Asta/2CENTRE OF GRAVITYH7.0-8.0FTSH6.0FT SPECIFICATIONS 1-11-2H7.0FTS SPECIFICATIONS 1-11-2H8.0FTS SPECIFICATIONS 1-11-27-1Engine manufacturer / modelKUBOTA V3600 62.3KWKUBOTA V3800 81.5KW10-1Operating pressure for attachments bar 155155Parking brakeR A T E D L O A D (k g )STANDARD HOOK TYPE CARRIAGELOAD CENTRE (mm)Load centre - distance from front of forks to centre of gravity of load.Rated load - based on vertical mast.2500350045005500650075008500050010001500H7.0FTH6.0FTH8.0FTSH7.0FTSH7.0FTS9MAST AND CAPACITY INFORMATIONNOTES:Specifications are affected by the condition of the vehicle and how it is equipped, as well as the nature and condition of the operating area. Inform your dealer of the nature and condition of the intended operating area when purchasing your Hyster ® truck.(1) Bottom of forks.(2) W/o load backrest.(3) h 6 subject to +/- 5 mm tolerance. 2549mm for Cab option.(4) Full suspension seat in depressed position. (5) Add 32mm with load backrest.(6) Variable.(7) Measured according to the test cycles and based on the weighting valuescontained in EN12053.All capacities are according to EN1551.MAST TABLES:(1) Deduct 224 with load backrest (2) Add 224 without load backrest (3) Deduct 125 without load backrest (4)Add 125 without load backrestSafety: This truck conforms to the current EU and ANSI requirements.NOTICE:Care must be exercised when handling elevated loads. Operators must be trained and must read, understand and follow the instructions contained in the Operating Manual.All values are nominal values and they are subject to tolerances. For further information, please contact the manufacturer.Hyster products are subject to change without notice.Lift trucks illustrated may feature optional equipment. Values may vary with alternative configurations.Specification data is based on VDI 2198.CERTIFICATION: Hyster lift trucks meet the design and construction requirements of B56.1-1969, per OSHA Section 1910.178(a)(2), and also comply with the B56.1 revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck. Performance specifications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operating area, proper service and maintenance of the vehicle. If these specifications are critical, the proposed application should be discussed with your dealer.NOTE: Specifications, unless otherwise listed, are for a standard truck without optional equipment.H6.0FT / H7.0FT / H7.0FTS RATED CAPACITY KG@ 600 MM LOAD CENTREMaximum fork height h 3 + s (mm)Back tilt (°)Lowered height h 1 (mm)Extended height h 4 (mm) (3)Free lift height h 2 + s (m)8.25 x 15-14 Dual pneumatic drive tyresCarriage without sideshift (kg)Carriage with integral sideshift (kg)H8.0FTS H8.0FTS 2-S T A G E L I M I T E D F R E E L I F T 30659°2712435008000796035659°2962485008000795045659°3462585008000793055659°3962685008000790060659°421273500792078103-S T A G E F U L L F R E E L I F T46156°270260771565 (4)8000741055156°300269771865 (4)8000739059656°315274272015 (4)79707360H7.0FTS9 / H8.0FTS RATED CAPACITY KG@ 900 MM LOAD CENTREMaximum fork height h 3 + s (mm)Back tilt (°)Lowered height h 1 (mm)Extended height h 4 (mm) (3)Free lift height h 2 + s (m)8.25 x 15-14 Dual pneumatic drive tyresCarriage without sideshift (kg)Carriage with integral sideshift (kg)H7.0FTS9H8.0FTS H7.0FTS H8.0FTS 2-S T A G E L I M I T E D F R E E L I F T 30659°271243500739067706900632035659°296248500738067606890631045659°346258500736067406880629055659°396268500734067306860628060659°42127350072606650678062003-S T A G E F U L L F R E E L I F T46156°270260771565 (4)688063406430592055156°300269771865 (4)686063206410590059656°315274272015 (4)6840630063905880ERGONOMICS (continued)STD OPT Standard seat belt XHI VIS red seat beltX HI VIS red seat belt with interlock X Air conditioningX Rear drive handle with horn button X Dash mounted 12V auxiliary power outlet XManual lever hydraulic controlsXTouchPoint TMmini lever hydraulic controlsX Joystick X Directional leverXIntegrated directional switch X MonotrolTMX Load weight display XVISIBILITYSTDOPT Dual mirrors side viewX Rear mounted color camera with LCD displayX 2 front and 1 rear LED work lights with stop, tail, indicator & reverse lights X 2 front and 1 rear halogen work lights with stop, tail, indicator & reverse lightsXLED work light protection X Mast mounted LED lights X Hazard warning lights XOPERATIONSTD OPTTurn assist system - H7.0FTS / H7.0FTS9 / H8.0FTS XAudible reverse alarm X Amber strobe lightX Pedestrian awareness light (P .A.L.)X Front pedestrian awareness light (P .A.L.)X Keyswitch start XOperator password startX Push button start with operator password X Push button park brake X Battery disconnect switch X System monitoring package XPremium monitoring packageX Seat switch activated engine, lights and display shutdown system X Signal activated engine shutdown system X Impact monitor with 30s shutdown X Impact monitor with immediate shutdown X Full underbody mesh belly pan X Greasing system for base truck X Optical fuel level sensor X Pressure fuel level sensor X 2 front / 1 rear lifting eyes X Aftermarket-ready telemetry kit X Wireless access card reader X Wireless monitoring - cell XWireless monitoring - wifi X Wireless verification XPACKAGESSTDOPT Cool Truck package which includes belly pan including brake line protection, exhaust wrap, fans in hood key activated and rubber front axle guard XAPPEARANCESTD OPT Hyster yellow paint base truck XSpecial paint colour XSUPPLEMENTAL STDOPT Literature pack X CE certificationX 12 Months / 2,000 Hours manufacturers warranty X36 Months / 6,000 Hours extended warrantyX FEATURES AND OPTIONSSpecial Products Engineering Department (SPED). Contact Hyster for details.www.hyster.eu *********************/HysterEurope @HysterEurope/HysterEuropeSTRONG PARTNERS. TOUGH TRUCKS.TMFOR DEMANDING OPERATIONS, EVERYWHERE.Hyster supplies a complete range of warehouse equipment, IC and electric counterbalanced trucks, container handlers and reach stackers. Hyster is committed to being much more than a lift truck supplier.Our aim is to offer a complete partnership capable ofresponding to the full spectrum of material handling issues: Whether you need professional consultancy on your fleet management, fully qualified service support, or reliable parts supply, you can depend on Hyster.Our network of highly trained dealers provides expert,responsive local support. They can offer cost-effective finance packages and introduce effectively managed maintenance programmes to ensure that you get the best possible value. Our business is dealing with your material handling needs so you can focus on the success of your business today and in the future.HYSTER-YALE UK LIMITED trading as Hyster Europe. Registered Address: Centennial House, Building 4.5, Frimley Business Park, Frimley, Surrey GU16 7SG, United Kingdom.Registered in England and Wales. Company Registration Number: 02636775. ©2020 HYSTER-YALE UK LIMITED, all rights reserved. HYSTER,, STRONG PARTNERS. TOUGH TRUCKS., MONOTROL andare trademarks of HYSTER-YALE Group, Inc.Kubota is a trademark of Kubota Corporation. Grammer is a trademark of Grammer Seating Systems Ltd. Hyster products are subject to change without notice. Forklift trucks illustrated may feature optional equipment.Printed in EU. Part number: 3990331 Rev. 03-01/20HYSTER EUROPECentennial House, Frimley Business Park, Frimley, Surrey, GU16 7SG, England.Tel: +44 (0) 1276 538500。
上海裕竹实业有限公司简介
上海裕竹实业有限公司简介上海裕竹实业有限公司是一家由从事多年涂料化工行业的专业技术人员出资组建，集原材料产品研发、生产、应用、销售为一体的综合性实业公司。
公司致力于成为在化工行业持续发展的综合性产品供应商，以专业、及时、全面的服务为理念，急客户之所急，为客户提供准确、稳定的产品和完善的技术服务支持，协助客户解决生产、应用过程中的实际问题，与客户建立互惠共赢的长期合作关系。
上海裕竹实业有限公司主要业务范围涉及水性胶粘剂、水性上光油、水性油墨、内外墙乳胶漆、皮革涂层、其它水性体系等化工产品体系，经营范围涵盖：一、水包水多彩原材料：多彩保护胶、多彩稳定剂、多彩纤维素、多彩造粒乳液、多彩包裹乳液、多彩交联剂，多彩凝胶剂，提供成熟生产配方和上门协助生产；二、水性涂料体系全套助剂产品：润湿分散剂、丙烯酸碱溶胀增稠剂、聚氨酯流变改性剂、消泡剂、防腐防霉剂、多功能及特种助剂；三、溶剂型分散剂、流平剂、消泡剂、附着力促进剂及其他助剂；四、粉料类：消光粉、绢云母、高岭土、滑石、硫酸钡、碳酸钙；五、代理品牌：陶氏、巴斯夫、科莱恩、诺普科、海明斯德谦、毕克BYK助剂系列；滁州格锐湿法绢云母粉、复合钛白粉；上海裕竹实业有限公司追求稳定的产品、全面的服务，以提供客户最放心的产品和最需要的服务为宗旨，诚挚希望与您携手共赢！更多资料下载请登录：水性多彩漆保护胶体RT-1本产品为活化改性的白色流动粉末，对人体无害，无刺激性气味。
不溶于水，但是浸水会水合膨胀。
在低粘度下为无色透明液体，在8%溶度及以上时，可以在短时间能保持流动，如需一定时间存放，需要添加一定量的焦磷酸钠以确保保持流动性。
产品主要应用于水性多彩涂料，制得的多彩粒子定型性好，圆润饱满富有弹性，长时间储存不溶胀不渗色。
化学性能参数SiO2 51.6%、MgO 22.8%、Li2O 1.2%、Na2O 2.5%、高分子化合物8%典型物理性质→ 外观：白色自由流动性粉末→ 化学成分：阴离子→ PH值：8.5-10→ 溶剂：水→ 比重 1.8-2.3/cm3→密度 1200g/ cm3用途保护胶主要应用水包水涂料、厚浆涂料，化妆品、牙膏、清洁剂、油田等产品特性RT-1在水中形成卡片宫结构RT-1能使体系屈服值、触变性和施工性得到极大的提高，防止沉降和流挂RT-1可以直接加入使用，也可先制成10%浓度的预凝胶，建议在高剪切力作用下分散20-30分钟推荐用量和使用方法→ RT-1对涂料总量添加2~3%（成品形式），具体用量应以实验为准；RT-1可直接添加，建议先用水做成10%或5%溶液再添加。
能 高性能 高性能 高性能UV塑胶漆用功能性树脂及助剂-海名斯.德谦
高性能UV塑胶漆用功能性树脂及助剂Lily Yang杨丽君技术中心内容低收缩UV树脂Hypomer UA-M6PC 底材用UV树脂Hypomer UR-802特殊底材用附着力促进剂Adherant APX 氟改性丙烯酸酯流平剂levelol839有机硅改性流平剂levaslip8629最新IMR技术用UV树脂、助剂影响涂膜附着力的主要因素底材的特性涂膜对底材的润湿性硬化过程中是否有内应力的形成涂膜与底材的交互作用…提高漆膜对底材附着力的方法 改善底材的润湿情況表面清洁表面处理…..提高涂膜与底材的交互作用打磨（机械力）﹑烘烤（扩散作用） 涂料配方选择适当的树脂降低涂膜固化过程中内应力的差异附着力促进剂紫外光紫外光涂涂膜固化紫外光固化低收缩紫外光涂膜紫外光固化Hypomer UA-M6紫外光固化低聚物组成：丙烯酸丙烯酸酯齐聚物 不挥发份：65～68% 粘度：1200－2200cps溶剂：醋酸丁酯特性：较低的收缩性收缩性 优异的耐黄变性兼具硬度和柔韧性应用：塑料涂料 PVC 木地板 纸张油墨紫外光紫外光涂涂膜固化UA-M6 固化涂膜传统UV 树脂固化涂膜Hypomer UR-802紫外光固化低聚物组成：脂肪族聚氨酯丙烯酸酯齐聚物不挥发份：76～81%溶剂：醋酸丁酯外观：澄清至混浊粘稠液体特性：较低的收缩性提供PC底材密著 高反应速率耐热及耐水性佳建议：底漆树脂，尤其针对PC 底材的密着提供耐耐热、耐高耐高温温高湿后的密著Adherant APX 附着力促进剂主要特性增进UV 涂料对铝铝、铁等金属底材的密着 增进UV 涂料对电镀底材的密着对漆膜的光泽、耐化学品性能等无影响产品特征组成: 改性丙烯酸酯齐聚物 不挥发份≥94%酸价: 15~25 mg KOH/g应用UV 固化涂料添加量对树脂添加1~5%Adherant APX 附着力促进剂需直接进行UV 涂装的、难附着的铝板对真空蒸镀层亦具有较佳的附着力2K PUUV coating UV coating+ APX可直接涂装Adherant APW附着力促进剂产品特征组成: 酸性高分子化合物外观: 微黄澄清液体不挥发份: 58 -62%主要特性增进金属颜料在涂料中的粘结性，使铝粉不易脱落。
Endress+Hauser Oxymax COS61D 产品说明说明书
Products Solutions Services Brief Operating Instructions Oxymax COS61DOptical sensor for measuring dissolved oxygenWith Memosens protocolThese Instructions are Brief Operating Instructions; they arenot a substitute for the Operating Instructions pertaining tothe device.Detailed information on the device can be found in theOperating Instructions and in the other documentationavailable at:•/device-viewer•Smart phone/tablet: Endress+Hauser Operations AppKA01133C/07/EN/02.1671341288Oxymax COS61DEndress+Hauser Operations App 2Endress+HauserOxymax COS61D Table of contentsEndress+Hauser 3Table of contents1Document information (4)1.1Warnings ............................................................................41.2Symbols (4)2Basic safety instructions (5)2.1Requirements for the personnel ............................................................52.2Designated use ........................................................................52.3Occupational safety .....................................................................52.4Operational safety ......................................................................62.5Product safety .........................................................................63Installation (7)3.1Installation conditions ...................................................................73.2Mounting the sensor ....................................................................83.3Installation examples ..................................................................103.4Post-installation check (15)4Electrical connection (16)4.1Connecting the sensor ..................................................................164.2Ensuring the degree of protection .........................................................164.3Post-connection check (16)5Commissioning (18)5.1Function check .......................................................................185.2Sensor calibration .....................................................................185.3Cleaning the sensor automatically (18)Document information Oxymax COS61D 1 Document information1.1 Warnings1.2 Symbols4Endress+HauserOxymax COS61D Basic safety instructionsEndress+Hauser 52Basic safety instructions2.1Requirements for the personnel•Installation, commissioning, operation and maintenance of the measuring system may be carried out only by specially trained technical personnel.•The technical personnel must be authorized by the plant operator to carry out the specified activities.•The electrical connection may be performed only by an electrical technician.•The technical personnel must have read and understood these Operating Instructions and must follow the instructions contained therein.•Measuring point faults may be repaired only by authorized and specially trained personnel.Repairs not described in the Operating Instructions provided may only be carried out directly by the manufacturer or by the service organization.2.2 Designated useThe oxygen sensor is suitable for continuous measurement of dissolved oxygen in water.The main areas of application are:•Wastewater treatment plants–Oxygen measurement and regulation in the activated sludge basin for a highly efficient biological cleaning process–Monitoring the oxygen content in the wastewater treatment plant outlet •Water monitoringOxygen measurement in rivers, lakes or seas as an indicator of the water quality •Water treatmentOxygen measurement for status monitoring, e.g. of drinking water (oxygen enrichment,corrosion protection etc.)•Fish farmingOxygen measurement and regulation for optimum living and growth conditions Use of the device for any purpose other than that described, poses a threat to the safety of people and of the entire measuring system and is therefore not permitted.The manufacturer is not liable for damage caused by improper or non-designated use.2.3 Occupational safetyAs the user, you are responsible for complying with the following safety conditions:•Installation guidelines•Local standards and regulationsElectromagnetic compatibility•The product has been tested for electromagnetic compatibility in accordance with the applicable European standards for industrial applications.•The electromagnetic compatibility indicated applies only to a product that has been connected in accordance with these Operating Instructions.Basic safety instructions Oxymax COS61D6Endress+Hauser2.4Operational safety1.Before commissioning the entire measuring point, verify that all connections are correct. Ensure that electrical cables and hose connections are undamaged.2.Do not operate damaged products, and safeguard them to ensure that they are not operated inadvertently. Label the damaged product as defective.3.If faults cannot be rectified:Take the products out of operation and safeguard them to ensure that they are not operated inadvertently.Non-designated useIncorrect measurements, malfunctions and even measuring point failure could result ‣Only use the product in accordance with the product specifications.‣Pay particular attention to the technical data on the nameplate.2.5 Product safetyThe product is designed to meet state-of-the-art safety requirements, has been tested, and left the factory in a condition in which it is safe to operate. The relevant regulations and European standards have been observed.Oxymax COS61D InstallationEndress+Hauser 73Installation3.1Installation conditions3.1.1Orientation1Angle of installationRecommended angle of inclinationThe sensor must be installed at an angle of inclination in an assembly, bracket or appropriate process connection. Recommended angle: 45°, to prevent the formation of air bubbles. At angles of inclination of 45 to 135°, air bubbles at the oxygen-sensitive membrane may increase the measured value.The sensor can be installed up to the horizontal in an assembly, support or suitable process connection. The optimum installation angle is 45°.Other angles and upside-down installation are not recommended. Reason: Possible sediment formation and resulting falsification of measured value.Observe the instructions for installing sensors in the Operating Instructions for the assembly used.3.1.2Mounting location•Choose a mounting location that can be easily accessed at a later stage.•Ensure that upright posts and fittings are fully secured and vibration-free.•Select an installation location which produces a typical oxygen concentration for the individual application.Installation Oxymax COS61D8Endress+Hauser3.2Mounting the sensor3.2.1 Mounting the cleaning unitIf the cleaning unit is not supplied in a preassembled state:1.Unscrew the protection guard.Retain the protection guard for possible reuse at a later stage without the cleaningunit.2.Carefully screw on the shaft sleeve as far as it will go.The cleaning nozzle should now be level with the spot.1Cleaning nozzle 2SpotOxymax COS61D InstallationEndress+Hauser93.Connect the hose for the compressed air supply (to be provided onsite) or compressor to the hose connection of the cleaning unit.3.2.2Installing a measuring pointInstallation in suitable assembly is required (depending on the application)L WARNINGElectrical voltageIn the event of a fault, non-grounded metallic assemblies may be under voltage and then are not touchable.‣When using metallic assemblies and installation equipment, observe the nationalgrounding provisions.For immersion operation, install the individual modules away from the basin on a solid base. Only carry out the final installation at the intended installation location. Select an installation location that is easy to access.For a complete installation of a measuring point, proceed as follows:1.Install a retractable or a flow assembly (if used) into the process.2.Connect the water supply to the rinse connections (if you use an assembly with cleaning function).3.Install and connect the oxygen sensor.Installation errorCable open circuit, loss of sensor due to cable separation, unscrewing of fluorescence cap ‣Do not install the sensor suspended from the cable.‣Screw the sensor into the assembly so that the cable is not twisted.‣When installing or uninstalling the sensor body, hold it tightly. Turn using only the hexagonal nut on the armored coupling. Otherwise you might unscrew the fluorescence cap. This will then remain in the assembly or process.‣Avoid exerting excessive tensile force on the cable (e.g. from jerky pulling).‣Select an installation location that is easy to access for later calibrations.‣Observe the instructions for installing sensors in the Operating Instructions for the assembly used.Installation Oxymax COS61D10Endress+Hauser3.3Installation examples3.3.1Immersion operationUniversal holder and chain assembly2Chain holder on railing1Chain2Holder Flexdip CYH1123Rail4Sensor Oxymax5Wastewater assembly Flexdip CYA1123Chain holder on upright post 1Weather protection cover CYY1012Controller / transmitter 3Chain4Wastewater assembly Flexdip CYA1125Sensor Oxymax6Holder Flexdip CYH112Oxymax COS61D Installation Universal holder and fixed immersion tube4Assembly holder with immersion tube1Protective cover2Controller / transmitter3Flexdip CYA112 immersion assembly4Sensor Oxymax5Assembly holder Flexdip CYH112Endress+Hauser11Installation Oxymax COS61D Basin rim mounting with immersion tube5Basin rim mounting1Pendulum holder CYH1122Assembly Flexdip CYA1123Assembly float4Sensor Oxymax12Endress+HauserOxymax COS61D Installation Endress+Hauser 13FloatThe CYA112 float is for use in the case of large fluctuations in water level, for example in rivers or lakes.6Dimensions in mm (inch)1Cable run with strain relief and rain shield 2Fixing ring for rope and chains with terminal screw3Eyelets Ø15, 3 x 120 ° for anchoring 4Plastic float, resistant to salt water 5Pipe 40 x 1, stainless steel 1.45716Bumper and ballast 7Oxygen sensorInstallation Oxymax COS61D14Endress+Hauser3.3.2Flow assembly COA2507COA250 8Bypass installation with manually actuated valves or solenoid valves 1Main pipe 2Medium return 3Oxygen sensor 4, 7Manually actuated or solenoid valves 5Flow assembly COA250-A 690 ° pipe elbow 8Medium removalOxymax COS61D InstallationEndress+Hauser 153.3.3 Retractable assembly COA4519Permissible and impermissible sensor installation positions with retractable assembly COA4511Ascending pipe, best position 2Horizontal pipe, sensor top down, impermissible due to air cushion or foam bubble forming 3Horizontal pipe, lateral installation with permissible installation angle (acc. to sensor version)4Down pipe, impermissibleNOTICESensor not fully immersed in the medium, deposit on sensor membrane or sensor optics,sensor installed upside down Incorrect measurements are possible and these may affect the measuring point.‣Do not install the assembly at points where air pockets or bubbles form or where suspended particles may build up at the sensor membrane or sensor optics (item 2).3.4Post-installation check •Are the sensor and cable undamaged?•Is the orientation correct?•Is the sensor installed in an assembly and is not suspended from the cable?•Avoid the penetration of moisture by fitting the protective cap to the immersion assembly.Electrical connection Oxymax COS61D 16Endress+Hauser4 Electrical connectionL WARNINGDevice is live Incorrect connection may result in injury or death ‣The electrical connection may be performed only by an electrical technician.‣The electrical technician must have read and understood these Operating Instructions and must follow the instructions contained therein.‣Prior to commencing connection work, ensure that no voltage is present on any cable.4.1 Connecting the sensorConnection data •Sensor cable connected directly to the terminal connector of the basic module •Optional: Sensor cable plug connected to the M12 sensor socket on the underside of the transmitter With this type of connection, the transmitter is already wired at the factory.10Sensor fixed cable with terminated cable cores4.2 Ensuring the degree of protectionOnly the mechanical and electrical connections which are described in these instructions and which are necessary for the required, designated use, may be carried out on the device delivered.‣Exercise care when carrying out the work.Otherwise, the individual types of protection (Ingress Protection (IP), electrical safety, EMC interference immunity) agreed for this product can no longer be guaranteed due, for example,to covers being left off or cable (ends) which are loose or insufficiently secured.4.3 Post-connection checkOxymax COS61D Electrical connectionEndress+Hauser17Commissioning Oxymax COS61D 18Endress+Hauser5Commissioning 5.1 Function checkBefore first commissioning, check if:•the sensor is correctly installed •the electrical connection is correct.If using an assembly with automatic cleaning, check that the cleaning medium (e.g. water or air) is connected correctly.L WARNINGEscaping process medium Risk of injury from high pressure, high temperatures or chemical hazards ‣Before applying compressed air to an assembly with cleaning facility, make sure the connections are correctly fitted.‣Do not install the assembly in the process if you cannot make the correct connection reliably.5.2Sensor calibration The sensor is calibrated at the factory. A new calibration is only needed in special situations.5.3 Cleaning the sensor automatically Compressed air is most suitable for cyclic cleaning. The cleaning unit is either provided or can be retrofitted, and is attached to the sensor head. It operates at a capacity of 20-60 l/min.Optimum results are achieved at 2 bar (29 psi) and 60 l/min.The following settings are recommended for the cleaning unit:*71341288*71341288。
海明斯德谦产品说明
助剥型、防粘剂产品名称特性LA-211 通用型助剥剂，对离型纸剥离效果极佳，并能改善流平、防粘性LA-213 镜面用助剥剂，不影响镜面革光泽与鲜艳性LA-221 流平、平滑、底材润湿LA-222 耐高温，强效助剥剂，适用于半 PU 和 PVC 革中，且适用于揉纹革中LA-224 特殊离型纸润湿、流平剂，消除针孔、缩孔问题LA-229 干、湿两用，强效防粘助剥剂，具有湿蜡手感及消泡，流平效果LA-230 特殊防粘流平剂，适合干法面层及表处理加工LA-231 特用助剥剂、适用于美国深沟纸LA-236 特用助剥剂，适用衣用革，提供干爽手感，并可对珠光颜料定位排列LA-245 可再涂，防粘助剥剂，提供柔细触感LA-266 干、湿法两用，强效防粘助剥剂，适用于低膜量树脂LA-539 可改善干法 PU 树脂流平、防粘性，赋予油滑触感LA-568 改善涂膜流平性与粘着性LA-587 PU 树脂反应型流平剂，赋予平滑与耐磨性，并可改善 PU 树脂透气、透湿及防水性LA-619 干、湿法两用，流平，防粘助剥剂紫外光固化树脂产品名称特性用途Hypomer UA-M6 铝粉底漆附着性佳、兼具硬度与柔韧性铝粉漆罩光清漆、塑料涂料Hypomer UR-21 脂肪族氨酯丙烯酸低聚物，兼具硬度与柔韧性，抗黄变紫外光固化涂料及油墨、软质PVC上光、PVC地板、木器涂料Hypomer UR-22 脂肪族氨酯丙烯酸低聚物，低粘度，延展性佳，可作为韧性改性树脂紫外光固化涂料及油墨、PVC地板、木器涂料Hypomer UR-33 固化速度快紫外光固化涂料、铝粉漆罩光Hypomer UR-61 高硬化速度、硬度与耐磨性佳塑料涂料热塑性丙烯酸产品名称特性用途Hypomer AC-7416 铝鳞片排列性佳、塑料附着性佳、与醋丁纤维素及硝基漆相容性佳塑料涂料、铝粉漆Hypomer AC-7435 铝鳞片排列性佳，快干，与醋丁纤维素、硝基漆相容性佳，耐高温、高湿耐手汗性能佳塑料涂料、铝粉漆、木器涂料Hypomer AC-7450 干燥速度快，塑料附着性佳，耐醇性佳塑料涂料、铝粉漆、罩光面漆羟基丙烯酸树脂产品名称特性用途Hypomer FS-1560 快干，塑料附着性优塑料漆，铝粉漆Hypomer FS-1660 低粘度，丰满度佳，耐候性佳，塑料附着性佳汽车修补漆、塑料漆、大中巴底色漆Hypomer FS-2050 快干，塑料及金属附着性佳铝粉漆Hypomer FS-2060A 快干，塑料及非铁金属附着性佳塑料漆、金属涂料Hypomer FS-2060B 快干，塑料附着性佳，颜料润湿性佳汽机车、塑料漆、底色漆及中涂Hypomer FS-2460A 耐黄变，耐候性佳，塑料附着性佳室外用途、塑料漆、摩托车漆、工程机械涂料Hypomer FS-2820 耐黄变，耐候性佳耐黄变，耐候性佳Hypomer FS-2860A 快干，高光泽，高鲜映性，耐汽油性佳汽车金属元件涂装、汽车修补漆及塑料涂料罩光Hypomer FS-2970A 高光泽，高鲜映性，流平性佳，涂膜丰满度佳汽车修补漆、运输工具、工业涂料及塑料涂料罩光Hypomer FS-2970B 高光泽，高鲜映性，流平性佳，涂膜丰满度佳汽车修补漆、运输工具、工业涂料Hypomer FS-3060 高光泽，高鲜映性，流平性佳、固化速度快汽机车面漆、工业涂料、汽车修补漆、工程机械涂料Hypomer FS-3070 涂膜丰满度佳，耐冲击性佳，流平性佳金属涂装、摩托车漆Hypomer FS-3270 高丰满度、高硬度，耐溶剂性佳汽车修补漆、运输工具、工业涂料、摩托车漆Hypomer FS-4365A 高丰满度，高硬度，耐冲击性优异，高交联密度汽车修补漆、运输工具、工业涂料Hypomer FS-4660 高交联密度，高光泽，流平性佳汽车修补漆、工业涂料Hypomer FS-4660P 高光泽、高鲜映性、流平性佳、耐溶剂性佳汽车修补、工业涂料Hypomer FX-2061 铝粉排列性佳、CAB相容性佳、优异耐醇与耐磨耗性塑料涂料、铝浆漆Hypomer FX-4470 高固体分、低粘度，高光泽、高丰满度，流平性佳汽车修补漆、运输工具、摩托车漆与工业涂料羟基聚酯树脂产品名称特性用途Hypomer PE-8043 涂膜柔软性佳，耐冲击性佳，塑料附着佳汽机车塑料漆、丙烯酸树脂改性、弹性涂料Hypomer PE-9624 涂膜柔软性佳，耐冲击性佳，塑料附性佳汽机车塑料漆、丙烯酸树脂改性、弹性涂料消泡剂产品名称特性用途Defom 2700 脱泡，抑泡，相容性紫外光固化、不饱和聚酯、环氧树脂体系Defom 3100 脱泡，抑泡紫外光固化、不饱和聚酯、环氧树脂体系Defom 3150 脱泡，抑泡，相容性不饱和聚酯体系Defom 3200 脱泡，抑泡封闭底漆、硝基漆、烘漆Defom 3500 抑制或消除木器底漆因制造过程或内含填充料所导致的气泡溶剂型木器底漆及手刷漆Defom 5300 消泡，抑泡，相容性、改善流动性溶剂型涂料体系Defom 5400 消泡，抑泡，相容性溶剂型涂料体系Defom 5500 消泡，抑泡，对于聚氨酯反应生成的气泡，脱泡效果特别显著溶剂型涂料体系Defom 5600 消泡，抑泡，相容性溶剂型涂料体系Defom 5700 消泡，抑泡溶剂型涂料体系、无溶剂环氧体系Defom 5800F 消泡，抑泡，相容性，不含芳香族溶剂溶剂型涂料体系、玩具漆 Defom 6500 消泡，抑泡、脱泡溶剂型涂料体系、无溶剂环氧体系Defom VP-6510 消泡，抑泡、脱泡，相容性溶剂型涂料体系、无溶剂环氧体系 Defom 6600 脱泡，抑泡，对于聚氨酯反应生成的气泡，脱泡效果特别显著着溶剂型涂料体系Defom 6800 高粘度、无溶剂体系的脱泡，抑泡地坪涂料、环氧体系、不饱和聚酯体系Defom 8700 脱泡，抑泡，流平硝基漆、封闭底漆、酸固化涂料、烘漆、不饱和聚酯体系、紫外光固化体系手感剂产品名称特性LA-302 特殊可注塑型油皮手感剂，具有油滑感LA-306 特殊球革手感剂，增强拨水性LA-310 油滑手感，改善皮革粘连性及剥离性LA-323 磨面皮表处理剂，柔软干爽手感，具有防污、防水及增艳LA-327 特殊手感剂，赋予皮革干爽滑感LA-338 干爽厚实蜡感，水油通用，改善耐磨性，适用于沙发革等LA-351 油滑厚实手感，水油通用，增进平滑性、耐磨性、防粘着性等LA-364 绵感手感剂，赋于皮膜柔软触感及泼水性，适用于表面处理剂配方LA-374 强效滑爽，增进涂膜抗刮损性LA-376 具有平滑拨水性及防污等性LA-380 高抗刮性，耐磨性，具有蜡感，适用于鞋革等日本东洋化成PP 附着增进剂品名特性与用途组成OPP膜专用13-LP OPP膜，油墨，增进OPP膜与纸张或其他材质的粘合性氯化PP树脂15-LP OPP膜，油墨，增进OPP膜与纸张或其他材质的粘合性氯化PP树脂16-LP OPP膜，油墨，增进OPP膜与纸张或其他材质的粘合性氯化PP树脂底漆14-LLB 增进PP底材与罩光漆的附着性，PP塑料底色漆氯化PP树脂14-LW-P PP塑料底漆氯化PP树脂14-WL-P PP塑料底色漆氯化PP树脂CY-9122P PP塑料底色漆特殊酸改性低分子量氯化聚烯烃CY-9124P PP塑料底色漆特殊酸改性低分子量氯化聚烯烃CY-9124 PP塑料底色漆CY-9124P的甲苯溶液一次涂装底色漆1487-JR 一次涂装PP塑料底色漆丙烯酸改性氯化聚烯烃163-LR 可直接做成一次涂装底色漆氯化PP改性丙烯酸树脂B-13 PP塑料底漆或接着剂丙烯酸改性氯化聚烯烃B-13MLJ 可直接做成一次涂装底色漆丙烯酸改性氯化聚烯烃F-2 分子量高，柔韧性佳，低温稳定性佳，可做为PP塑料底色漆或低温烘烤底漆改性氯化聚烯烃F-6 与F-2同，低温稳定性更优于F-2 改性氯化聚烯烃HM-21P 一次涂装PP塑料底色漆特殊酸改性氯化聚烯烃M-28P 与极性树脂相容性佳，可直接做成一次涂装底色漆特殊酸改性氯化聚烯烃P-5551 相容性佳，可直接做成底色漆，一次涂装PP塑料漆特殊酸与丙烯酸酯改性氯化聚烯烃P-5528 相容性佳，可直接做成底色漆，一次涂装PP塑料漆特殊酸与丙烯酸酯改性氯化聚烯烃P-5528H 不含三苯溶剂，一次涂装PP塑料漆特殊酸与丙烯酸酯改性氯化聚烯烃DX-526P 低温稳定性佳，可用非苯溶剂溶解，作为添加剂，直接添加于各种树脂体系氯化共聚烯烃水性EH-801 PP塑料底漆改性氯化聚烯烃的水性乳液EW-5303 PP塑料底漆，汽车内装PP塑料底漆改性氯化聚烯烃的水性乳液硅酮改性聚酯树脂产品名称特性用途Hypomer SPE-112 硅酮改性聚酯树脂耐热涂料、不沾锅、烹饪器具Hypomer SPE-115 硅酮改性聚酯树脂耐热涂料、不沾锅、烹饪器具。
海斯特柴达菲尔产品技术指南说明书
R30XM3 SERIESPRODUCT BROCHURE2*Turning radius is the same with or without guide rollers† Rated load figures are based on 3000 lb (1361 kg) load and a 24” load center.NOTE: Performance specifications are for truck with standard equipment. Performance specifications are affected by the condition of the vehicle and how it is equipped as well as the nature and condition of the operating area. If these specifications are critical, the proposed application should be discussed with your dealer.Lift heights over 360” (9144 mm) maximum fork height may require reduced capacity depending upon OEC dimensions.3Right angle stack and equal intersecting aisle dimensions provided with a 40” wide x 48” long pallet load, allowing zero clearance.1Speeds are the same in either direction, with or without rated load. Steer angle <10 degrees.2Optional with Hyster Power Cellect ™CERTIFICATION: These Hyster ® lift trucks meet the design and construction requirements of B56.1-1969, per OSHA Section 1910.178(a)(2), and also comply with the B56.1 revision in effect at time of manufacture. Performance specifications are for a truck equipped as described under standard equipment on this technical guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operating area, proper service and maintenance of the vehicle. If these specifications are critical, the proposedapplication should be discussed with your dealer.Battery compartment length is measured from front to rear. Battery compartment width is measured across truck. SB350 Amp “red” connector, cable position B, cable length 16” (405mm). Maximum cable gauge 1/0 AWG. Battery with lid will NOT fit in battery compartment. Battery weight range 1600 - 1900 lb.Amp hour capacity min/max - 24 volt truck 960/1240. 36 volt truck 600/775.Note: Speed limits are for trucks at operating temperature with fully charged battery. Speeds are the same in either direction, with or without rated load.For lift heights between 24.0” (610 mm) and 212.0” (5385 mm), traction speed is reduced when steering angle exceeds 10°.* T ravel above 212.0” (5385 mm) fork height requires a high level traction option. Capacity reduction required.Contact your local dealer for additional information.。
Endress+Hauser FieldCare和DeviceCare入门指南说明书
U盘 => <= =>
有互联网连接的计算机 在 Endress+Hauser 软件门户网站 1. 激活申请 执行：从 U 盘上传许可证申请文件 (*.EHR)。 2. 许可证激活/更新 执行：在 U 盘上存储许可证更新文件 (*.EHU)。
3. 许可证激活的确认 执行：从 U 盘上传许可证确认文件 (*.EHC)。
版本 2.15.xx 支持的安装和更新场景：
安装的操作 系统
安装的 SQL Server
Windows 10 否
FieldCare 数据库 1) 否
Windows 10 SQL Server 否 2014 或 SQL Server 2016
Windows 8.1 • 否
否
- 10
• SQL
Server
FieldCare 是有时间限制的免费试用版。许可协议（EULA）可有效使用。如果是 永久使用 FieldCare，需要购买 FieldCare 并利用提供的软件 ID 激活许可证。
FieldCare 许可模式包含一个称为“工厂资产管理”(PAM) 的基本模块和一个称为 “状态监测”的扩展模块。许可证中包括 PAM 模块和进一步扩展的组合。
2. 点击按钮 Renew License。 显示 Access Software Portal 窗口。
Endress+Hauser
13
3. 输入您的电子邮件地址和密码，然后点击 Renew License。 如果已成功激活，出现以下窗口：
4. 如果您还没有 Endress+Hauser 软件门户网站的用户账户，返回步骤 2 并 点击 Create Account。
4.1 系统要求
海哥尔德电子产品简介说明书
APRIL 2013Quick-Refere nce GuideLAPTOP, DESKTO P AND VIDEO STORAGE DRIVESSeagate Partner Program MembersVisit the Sales Tools section to access the latestproduct roadmap, end-of-life schedule and product information. DistributorsEMEA SPP Support00-800-6890-8282US Sales Support1-800-SEAGATE or 1-405-324-4700Visit for more information or call 1-800-SEAGATE (1-800-732-4283) © 2013 Seagate Technology LLC. All rights reserved. Printed in USA. Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Barracuda, G-Force Protection, Momentus, Pipeline HD, SmartAlign and SV35 Series are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments. All other trademarks or registered trademarks are the property of their respective owners. When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual data rates may vary depending on operating environment and other factors. The export or re-export of hardware or software containing encryption may be regulated by the US Department of Commerce, Bureau of Industry and Security (for more information go to ). Seagate reserves the right to change, without notice, product offerings or specifications. QR502.15-1304GB, April 2013APRIL 2013Quick-Reference GuideLAPTOP, DESKTOP AND VIDEO STORAGE DRIVESNew Seagate Model Number KeyDesktop, laptop and video storageST 500 DX 001BRANdCAPACiTySegMeNTATTRiBuTeS2 letters ST= Seagate MX= Maxtor2 to 4 digits 80 = 80GB 500 = 500GB 1500 = 1,500GB Capacities>9,999GB: 10 = 10TB 15 = 15TB2 lettersDX = Desktop Premium DM = Mainstream DL = Entry LevelLX = Laptop Premium LM = Laptop Mainstream LT = Laptop Thin VX = Surveillance VM = DVR VT = DVR Thin3 digits, non-intelligent Varies for:Z-height Form Factor RPM Cache Interface SED, FIPS Drop Sensor Interface SpeedView a brief training presentation on how our model numbering format has changed at /seagate/ModelNumber 1 One gigabyte, or GB, equals one billion bytes; and one terabyte, or TB, equals one trillion bytes when referring to drive capacity.2See FIPS 140-2 Level 2 Certificate at /groups/STM/cmvp/documents/140-1/1401vend.htm.37mm z-height expanded to 9.5mm enables compatibility with standard laptop chassis.4Advanced Format 4K sector drive with SmartAlign ™ technology resolves misalignment conditions.5Seagate makes this drive in both 4K and 512-byte sectors. SmartAlign technology is included on 4K sector drives. Both drives are functionally and physically equivalent.6Formerly Barracuda ®drive。
低VOC双组分环氧底漆的研制
低VOC双组分环氧底漆的研制王庆军【摘要】阐述了低VOC双组分环氧底漆的基本配方及其制备工艺,并列举了所得底漆性能指标的测试结果,符合HG/T 4566—2013标准要求,讨论了环氧树脂、固化剂、环氧活性稀释剂、颜填料、防沉剂和分散剂的选用.【期刊名称】《上海涂料》【年(卷),期】2017(055)001【总页数】4页(P22-25)【关键词】低VOC双组分环氧底漆;环氧防腐漆;环境友好型涂料【作者】王庆军【作者单位】山东齐鲁漆业有限公司,山东聊城 252000【正文语种】中文【中图分类】TQ630.7环氧防腐漆在防腐漆中占据重要角色，其中环氧底漆在钢结构防腐蚀应用中又以其优异的耐水性、耐盐水性、附着力和防锈性能，而广泛用于港口、码头、重型机械、矿山机械、电力机械、化工设备、水利工程等钢构件，用作防锈底漆。
2015年1月26日，国家财政部和税务总局联合发布《关于对电池涂料征收消费税的通知》。
自2015年2月1日起，开始对涂料征收消费税，适用税率为4%，对施工状态下VOC（挥发性有机化合物）含量＜420 g/L的涂料免征消费税。
可见发展环境友好型低VOC涂料已成为涂料行业的发展趋势。
1.1 主要原材料YPE-011环氧树脂，上海元邦化工制造有限公司；WSR 6101环氧树脂，南通星辰合成材料有限公司；BYK-163分散剂，毕克公司；S130氧化铁红，上海一品颜料有限公司；磷酸锌、三聚磷酸铝，广西三晶科技有限公司；沉淀硫酸钡，山西南风集团；958有机膨润土，海明斯德谦公司；NX-2041腰果油改性胺固化剂、NC-513活性稀释剂，卡德莱化工公司；650聚酰胺固化剂，国产；混合溶剂［m （二甲苯）∶m（丁醇）=7∶3］，工业品。
1.2 低VOC双组分环氧底漆的制备1.2.1 基本配方低VOC双组分环氧底漆的基本配方见表1。
1.2.2 制备工艺先在反应器中加入配方量的混合溶剂和YPE-011环氧树脂搅拌溶解，待溶解完毕后，加入WSR6101环氧树脂、NC-513活性稀释剂、BYK-163分散剂、S130氧化铁红、磷酸锌、三聚磷酸铝和沉淀硫酸钡进行高速分散，再加入958有机膨润土高速分散，然后砂磨至细度≤40 μm，搅拌均匀后，过滤，制得甲组分。
海明斯德谦化学
海明斯德谦化学
海明斯德谦化学，又称为HMDB，是一款免费的、可搜索的生物医学数据库，包含了数千种不同的小分子化合物及其生物学活性信息。
HMDB的信息覆盖范围非常广泛，包括代谢物、药物及其代谢物、环境
污染物等。
该数据库除了提供基本的化学结构信息和物理化学性质外，还提供了丰富的生物学活性数据，如生理功能、代谢通路、生物转化等，能够帮助生物医学研究人员深入了解小分子化合物在生物体内的
作用机理，为疾病诊断、预防和治疗提供有力的支持。
基于自增稠型羟基丙烯酸乳液的水性珠光涂料的制备
基于自增稠型羟基丙烯酸乳液的水性珠光涂料的制备胡中;许飞;庄振宇;张汉青;朱柯;祝宝英;刘汉功;刘明;王艳艳【摘要】在水性珠光涂料中,通常需要加入增稠剂来达到珠光颜料定向的效果,但增稠剂的使用会影响涂膜的耐水性.为了解决这一问题,本研究采用一种具有自增稠效果的核壳型羟基丙烯酸乳液作为成膜树脂,配合水性羟基丙烯酸分散体和水性聚氨酯分散体,制备得到一种自增稠型水性珠光涂料.分别对珠光涂料中3种功能成膜树脂的选择、增稠剂以及珠光颜料中所使用的分散介质的选择和用量进行了讨论.最后对所制备珠光涂料的涂层各项性能进行了测试.结果表明:选用自制的自增稠型羟基丙烯酸乳液作为主体成膜树脂,并以水性羟基丙烯酸分散体和水性聚氨酯分散体作为辅助成膜树脂,可制备综合性能优异的水性珠光涂料.相较于常规的水性珠光涂料,本研究制备的涂料光泽更高,耐水性更优.%In order to solve the problem of poor water resistance of aqueous pearlescent coatings caused by introduction of waterborne thickener in pearlescent composition,a novel self-thickening pearlescent paint was prepared by using a novel core/shell polyacrylic emulsion with self-thickening function,waterborne hydroxyl-functional polyacrylate dispersion and a waterborne polyurethane dispersion as film-forming resin.The effect of type of film-forming resin,thickening agent and peadescent pigment dispersion medium on the properties of the coatings were discussed.The results showed that the novel aqueous pearlescent coatings prepared by using self-thickening hydroxyl-functional acrylic emulsion as main resin and polyacrylic and polyurethane dispersion as auxiliary film-forming resin exhibited excellentcomprehensive properties,especially higher gloss and better water resistance as compared with the conventional aqueous pearlescent paint.【期刊名称】《涂料工业》【年(卷),期】2017(047)005【总页数】6页(P11-16)【关键词】珠光颜料;自增稠;羟基丙烯酸乳液;水性聚氨酯;耐水性;光泽【作者】胡中;许飞;庄振宇;张汉青;朱柯;祝宝英;刘汉功;刘明;王艳艳【作者单位】中海油常州涂料化工研究院有限公司,国家涂料工程技术研究中心,江苏常州213016;中海油常州涂料化工研究院有限公司,国家涂料工程技术研究中心,江苏常州213016;中海油常州环保涂料有限公司,江苏常州213014;中海油常州涂料化工研究院有限公司,国家涂料工程技术研究中心,江苏常州213016;中海油常州环保涂料有限公司,江苏常州213014;中海油常州涂料化工研究院有限公司,国家涂料工程技术研究中心,江苏常州213016;中海油常州涂料化工研究院有限公司,国家涂料工程技术研究中心,江苏常州213016;中海油常州涂料化工研究院有限公司,国家涂料工程技术研究中心,江苏常州213016;中海油常州涂料化工研究院有限公司,国家涂料工程技术研究中心,江苏常州213016;中海油常州涂料化工研究院有限公司,国家涂料工程技术研究中心,江苏常州213016;中海油常州涂料化工研究院有限公司,国家涂料工程技术研究中心,江苏常州213016【正文语种】中文【中图分类】TQ630.4由于流行时尚、汽车及其他消费市场的需求推动，能产生特殊效应的颜料(如随角异色效应或装饰性花纹效应)具有较高的经济价值，并且能在各种工业产品及终端用户中得到推广，具有珠光效果的功能涂料具有广泛的应用前景。
Agfa Super Solinette 产品说明书
DasAgfaSolinarl :3,5/50 ist ein fehlerfreizeichnender, farbkorrigierter Vierlinser, der neueste konstru ktive Erkenntn isse berücksichtigt und jeden Wunsch hinsichtlichZeichnung und Brillanz erfüllt.
e die Bedienung wesentlich. Die Filmmerkscheibe im Rückspulknopf zeigt an, mit welcher Filmsorte die Camera geladen ist.
• Die Sperr-Vorrichtungen
verhindern Doppel- und Leerbelichtungen . Besonderer Sperrknopf für die Rückspulung.
und schon sind die Konturen zur Deckung gebracht und die bestmögliche Bildschärfe ist gesichert!
Die Scharfeinstellung ist durch den gekuppelten Entfernungs-Messer der Agfa Super Solinette tatsächlich kein Problem mehr Man photographiert völlig unbeschwert und kann seine ganze Aufmerksamkeit uneingeschränkt dem Motiv zuwenden!
Endress+Hauser Memosens Wave CAS80E 全光谱传感器操作手册说明书
Products Solutions Services操作手册Memosens Wave CAS80E 全光谱传感器数字式全光谱水质分析传感器BA02005C/28/ZH/05.22-00715972932022-04-25Memosens Wave CAS80E 全光谱传感器目录Endress+Hauser 3目录1文档信息 (4)1.1安全图标 (4)1.2信息图标 (4)2基本安全指南 (5)2.1人员要求 (5)2.2指定用途 (5)2.3工作场所安全 (5)2.4操作安全 (5)2.5产品安全 (6)3产品描述 (7)3.1产品设计 (7)4到货验收和产品标识 (9)4.1到货验收 (9)4.2产品标识 (9)4.3供货清单 (10)5安装 (11)5.1安装要求 (11)5.2安装设备 (13)5.3安装后检查 (19)6电气连接 (20)6.1连接设备 (20)6.2确保防护等级 (21)6.3连接后检查 (21)7调试 (23)7.1功能检查 (23)8操作 (24)8.1基于过程条件调节测量设备 (24)8.2循环清洗 (27)9诊断和故障排除 (28)9.1常见故障排除 (28)10维护 (29)10.1维护计划 (29)10.2维护任务 (29)11维修 (31)11.1概述 (31)11.2备件 (31)11.3返厂 (31)11.4处置 (31)12附件..............................3212.1设备专用附件........................3213技术参数..........................3413.1输入...............................3413.2电源...............................3513.3性能参数............................3513.4环境条件............................3913.5过程条件............................3913.6机械结构............................39索引.. (41)文档信息Memosens Wave CAS80E 全光谱传感器4Endress+Hauser1 文档信息1.1 安全图标1.2 信息图标附加信息，提示允许或推荐的操作禁止或不推荐的操作参见设备文档参考页面参考图 操作结果1.2.1 设备上的图标参见设备文档资料此类产品不可作为未分类城市垃圾废弃处置。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
助剥型、防粘剂
产品名称特性
LA-211 通用型助剥剂，对离型纸剥离效果极佳，并能改善流平、防粘性
LA-213 镜面用助剥剂，不影响镜面革光泽与鲜艳性
LA-221 流平、平滑、底材润湿
LA-222 耐高温，强效助剥剂，适用于半 PU 和 PVC 革中，且适用于揉纹革中
LA-224 特殊离型纸润湿、流平剂，消除针孔、缩孔问题
LA-229 干、湿两用，强效防粘助剥剂，具有湿蜡手感及消泡，流平效果
LA-230 特殊防粘流平剂，适合干法面层及表处理加工
LA-231 特用助剥剂、适用于美国深沟纸
LA-236 特用助剥剂，适用衣用革，提供干爽手感，并可对珠光颜料定位排列
LA-245 可再涂，防粘助剥剂，提供柔细触感
LA-266 干、湿法两用，强效防粘助剥剂，适用于低膜量树脂
LA-539 可改善干法 PU 树脂流平、防粘性，赋予油滑触感
LA-568 改善涂膜流平性与粘着性
LA-587 PU 树脂反应型流平剂，赋予平滑与耐磨性，并可改善 PU 树脂透气、透湿及防水性
LA-619 干、湿法两用，流平，防粘助剥剂
紫外光固化树脂
产品名称特性用途
Hypomer UA-M6 铝粉底漆附着性佳、兼具硬度与柔韧性铝粉漆罩光清漆、塑料涂料
Hypomer UR-21 脂肪族氨酯丙烯酸低聚物，兼具硬度与柔韧性，抗黄变紫外光固化涂料及油墨、软质PVC上光、PVC地板、木器涂料
Hypomer UR-22 脂肪族氨酯丙烯酸低聚物，低粘度，延展性佳，可作为韧性改性树脂紫外光固化涂料及油墨、PVC地板、木器涂料
Hypomer UR-33 固化速度快紫外光固化涂料、铝粉漆罩光
Hypomer UR-61 高硬化速度、硬度与耐磨性佳塑料涂料
热塑性丙烯酸
产品名称特性用途
Hypomer AC-7416 铝鳞片排列性佳、塑料附着性佳、与醋丁纤维素及硝基漆相容性佳塑料涂料、铝粉漆
Hypomer AC-7435 铝鳞片排列性佳，快干，与醋丁纤维素、硝基漆相容性佳，耐高温、高湿耐手汗性能佳塑料涂料、铝粉漆、木器涂料
Hypomer AC-7450 干燥速度快，塑料附着性佳，耐醇性佳塑料涂料、铝粉漆、罩光面漆
羟基丙烯酸树脂
产品名称特性用途
Hypomer FS-1560 快干，塑料附着性优塑料漆，铝粉漆
Hypomer FS-1660 低粘度，丰满度佳，耐候性佳，塑料附着性佳汽车修补漆、塑料漆、大中巴底色漆
Hypomer FS-2050 快干，塑料及金属附着性佳铝粉漆
Hypomer FS-2060A 快干，塑料及非铁金属附着性佳塑料漆、金属涂料
Hypomer FS-2060B 快干，塑料附着性佳，颜料润湿性佳汽机车、塑料漆、底色漆及中涂
Hypomer FS-2460A 耐黄变，耐候性佳，塑料附着性佳室外用途、塑料漆、摩托车漆、工程机械涂料
Hypomer FS-2820 耐黄变，耐候性佳耐黄变，耐候性佳
Hypomer FS-2860A 快干，高光泽，高鲜映性，耐汽油性佳汽车金属元件涂装、汽车修补漆及塑料涂料罩光
Hypomer FS-2970A 高光泽，高鲜映性，流平性佳，涂膜丰满度佳汽车修补漆、运输工具、工业涂料及塑料涂料罩光
Hypomer FS-2970B 高光泽，高鲜映性，流平性佳，涂膜丰满度佳汽车修补漆、运输工具、工业涂料
Hypomer FS-3060 高光泽，高鲜映性，流平性佳、固化速度快汽机车面漆、工业涂料、汽车修补漆、工程机械涂料
Hypomer FS-3070 涂膜丰满度佳，耐冲击性佳，流平性佳金属涂装、摩托车漆
Hypomer FS-3270 高丰满度、高硬度，耐溶剂性佳汽车修补漆、运输工具、工业涂料、摩托车漆
Hypomer FS-4365A 高丰满度，高硬度，耐冲击性优异，高交联密度汽车修补漆、运输工具、工业涂料
Hypomer FS-4660 高交联密度，高光泽，流平性佳汽车修补漆、工业涂料
Hypomer FS-4660P 高光泽、高鲜映性、流平性佳、耐溶剂性佳汽车修补、工业涂料
Hypomer FX-2061 铝粉排列性佳、CAB相容性佳、优异耐醇与耐磨耗性塑料涂料、铝浆漆
Hypomer FX-4470 高固体分、低粘度，高光泽、高丰满度，流平性佳汽车修补漆、运输工具、摩托车漆与工业涂料
羟基聚酯树脂
产品名称特性用途
Hypomer PE-8043 涂膜柔软性佳，耐冲击性佳，塑料附着佳汽机车塑料漆、丙烯酸树脂改性、弹性涂料
Hypomer PE-9624 涂膜柔软性佳，耐冲击性佳，塑料附性佳汽机车塑料漆、丙烯酸树脂改性、弹性涂料
消泡剂
产品名称特性用途
Defom 2700 脱泡，抑泡，相容性紫外光固化、不饱和聚酯、环氧树脂体系
Defom 3100 脱泡，抑泡紫外光固化、不饱和聚酯、环氧树脂体系
Defom 3150 脱泡，抑泡，相容性不饱和聚酯体系
Defom 3200 脱泡，抑泡封闭底漆、硝基漆、烘漆
Defom 3500 抑制或消除木器底漆因制造过程或内含填充料所导致的气泡溶剂型木器底漆及手刷漆
Defom 5300 消泡，抑泡，相容性、改善流动性溶剂型涂料体系
Defom 5400 消泡，抑泡，相容性溶剂型涂料体系
Defom 5500 消泡，抑泡，对于聚氨酯反应生成的气泡，脱泡效果特别显著溶剂型涂料体系
Defom 5600 消泡，抑泡，相容性溶剂型涂料体系
Defom 5700 消泡，抑泡溶剂型涂料体系、无溶剂环氧体系
Defom 5800F 消泡，抑泡，相容性，不含芳香族溶剂溶剂型涂料体系、玩具漆 Defom 6500 消泡，抑泡、脱泡溶剂型涂料体系、无溶剂环氧体系
Defom VP-6510 消泡，抑泡、脱泡，相容性溶剂型涂料体系、无溶剂环氧体系 Defom 6600 脱泡，抑泡，对于聚氨酯反应生成的气泡，脱泡效果特别显著着溶剂型涂料体系
Defom 6800 高粘度、无溶剂体系的脱泡，抑泡地坪涂料、环氧体系、不饱和聚酯体系
Defom 8700 脱泡，抑泡，流平硝基漆、封闭底漆、酸固化涂料、烘漆、不饱和聚酯体系、紫外光固化体系
手感剂
产品名称特性
LA-302 特殊可注塑型油皮手感剂，具有油滑感
LA-306 特殊球革手感剂，增强拨水性
LA-310 油滑手感，改善皮革粘连性及剥离性
LA-323 磨面皮表处理剂，柔软干爽手感，具有防污、防水及增艳
LA-327 特殊手感剂，赋予皮革干爽滑感
LA-338 干爽厚实蜡感，水油通用，改善耐磨性，适用于沙发革等
LA-351 油滑厚实手感，水油通用，增进平滑性、耐磨性、防粘着性等
LA-364 绵感手感剂，赋于皮膜柔软触感及泼水性，适用于表面处理剂配方
LA-374 强效滑爽，增进涂膜抗刮损性
LA-376 具有平滑拨水性及防污等性
LA-380 高抗刮性，耐磨性，具有蜡感，适用于鞋革等
日本东洋化成PP 附着增进剂
品名特性与用途组成
OPP膜专用
13-LP OPP膜，油墨，增进OPP膜与纸张或其他材质的粘合性氯化PP树脂15-LP OPP膜，油墨，增进OPP膜与纸张或其他材质的粘合性氯化PP树脂16-LP OPP膜，油墨，增进OPP膜与纸张或其他材质的粘合性氯化PP树脂底漆
14-LLB 增进PP底材与罩光漆的附着性，PP塑料底色漆氯化PP树脂
14-LW-P PP塑料底漆氯化PP树脂
14-WL-P PP塑料底色漆氯化PP树脂
CY-9122P PP塑料底色漆特殊酸改性低分子量氯化聚烯烃
CY-9124P PP塑料底色漆特殊酸改性低分子量氯化聚烯烃
CY-9124 PP塑料底色漆CY-9124P的甲苯溶液
一次涂装底色漆
1487-JR 一次涂装PP塑料底色漆丙烯酸改性氯化聚烯烃
163-LR 可直接做成一次涂装底色漆氯化PP改性丙烯酸树脂
B-13 PP塑料底漆或接着剂丙烯酸改性氯化聚烯烃
B-13MLJ 可直接做成一次涂装底色漆丙烯酸改性氯化聚烯烃
F-2 分子量高，柔韧性佳，低温稳定性佳，可做为PP塑料底色漆或低温烘烤底漆改性氯化聚烯烃
F-6 与F-2同，低温稳定性更优于F-2 改性氯化聚烯烃
HM-21P 一次涂装PP塑料底色漆特殊酸改性氯化聚烯烃
M-28P 与极性树脂相容性佳，可直接做成一次涂装底色漆特殊酸改性氯化聚烯烃
P-5551 相容性佳，可直接做成底色漆，一次涂装PP塑料漆特殊酸与丙烯酸酯改性氯化聚烯烃
P-5528 相容性佳，可直接做成底色漆，一次涂装PP塑料漆特殊酸与丙烯酸酯改性氯化聚烯烃
P-5528H 不含三苯溶剂，一次涂装PP塑料漆特殊酸与丙烯酸酯改性氯化聚烯烃
DX-526P 低温稳定性佳，可用非苯溶剂溶解，作为添加剂，直接添加于各种树脂体系氯化共聚烯烃
水性
EH-801 PP塑料底漆改性氯化聚烯烃的水性乳液
EW-5303 PP塑料底漆，汽车内装PP塑料底漆改性氯化聚烯烃的水性乳液
硅酮改性聚酯树脂
产品名称特性用途
Hypomer SPE-112 硅酮改性聚酯树脂耐热涂料、不沾锅、烹饪器具
Hypomer SPE-115 硅酮改性聚酯树脂耐热涂料、不沾锅、烹饪器具。