中景园电子1.3OLED显示屏_数据手册
合集下载
相关主题
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
"A" 0.23 0.21
P0.23x64-0.02=14.7 0.23 0.21
Segment 129
( Column 1 )
Common 1
( Row 63 )
Common 63
( Row 1 )
Segment 2
( Column 128 )
Common 0
( Row 64 )
Common 62
31.42± 0.2 (V/A)
29.42± 0.2 (A/A)
10
5
1.4± 0.1
Item
Date
A
20130605
Remark Original Drawing
P0.23x128-0.02=29.42 "A"
(2.1) (1.1) 0.5± 0.5
0.21 0.23 P0.23x64-0.02=14.7
P This is a ground pin. It acts as a reference for the logic pins. It must be
connected to external ground.
Power Supply for OEL Panel
P
This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It
must be connected to external source when the converter is not used.
-
Driver 26
IREF
27
VCOMH
DC/DC Converter
6
VBAT
4/5 2/3
Interface
C1P / C1N C2P / C2N
11
BS1
12
6
2-R0.4± 0.05
14.7± 0.2 (A/A) 16.7± 0.2 (V/A) 18.2± 0.2 (Polarizer) 19.2± 0.2 (Cap Size)
23± 0.2 (Panel Size) (35)
4 4.75 6.887 11 12± 0.3
Active Area 1.3" 128 x 64 Pixels
Contact Side
Contact Side
0.23 0.21
0.1± 0.03
Detail "A" Scale (10:1)
Customer Approval Signature
Unless Otherwise Specified
Unit
mm
General Roughness
Tolerance
( Row 2 )
Detail "A" Scale (10:1)
1
Remove Tape t=0.15mm Max
1.4 Mechanical Drawing
0.5± 0.5 (1.54) (2.54)
34.5± 0.2 (Panel Size)
34.5± 0.2 (Cap Size)
33.5± 0.2 (Polarizer)
Product Specification
Part Name:
OEL Display Module
Customer Part ID:
Customer:
Approved by
Approved by
Revised History
Part Number Revision
QG-2864KLBLG03
A New
Polarizer t=0.2mm
Segment 129
( Column 1 )
Common 1
( Row 63 )
Common 63
( Row 1 )
Segment 2
( Column 128 )
Common 0
( Row 64 )
Common 62
( Row 2 )
Glue
Protective Tape 15x8x0.05mm
Power Supply for DC/DC Converter Circuit
P This is the power supply pin for the internal buffer of the DC/DC voltage converter.
This pin should be disconnected when VPP is supplied externally
Revision Content
Revised on 20130605
i
Contents
Revision History Contents 1. Basic Specifications
1.1 Display Specifications 1.2 Mechanical Specifications 1.3 Active Area / Memory Mapping & Pixel Construction 1.4 Mechanical Drawing 1.5 Pin Definition 2. Absolute Maximum Ratings 3. Optics & Electrical Characteristics 3.1 Optics Characteristics 3.2 DC Characteristics 3.3 AC Characteristics
0.85± 0.1 22± 0.2
1. Color: Blue 2. Driver IC: SSD1106G 3. FPC Number: QT1106P04 4. Interface:
8-bit 68XX/80XX Parallel, 4-wire SPI, I2 C 5. General Tolerance: ± 0.30
12± 0.2
1
30
D4 D5
D6 D7
IREF V COMH
V CC NC
N.C . (GND)
D1 D2
R /W#
C S# R ES#
NC B S1
C 2P C 1P V BAT V SS
E /RD#
C 2N C 1N V SS
2± 0.3
Notes:
(6.25)
16± 0.1 (Alignment Mark) P0.70x(30-1)=20.3 ± 0.05(W0.40± 0.03)
ii
1. Basic Specifications
1.1 Display Specifications 1) Display Mode: 2) Display Color: 3) Drive Duty:
Passive Matrix Monochrome (White) 1/64 Duty
1.2 Mechanical Specifications
3.3.1 68XX-Series MPU Parallel Interface Characteristics 3.3.2 80XX-Series MPU Parallel Interface Characteristics 3.3.3 Serial Interface Characteristics (4-wire SPI) 3.3.4 I2C Interface Characteristics 4. Functional Specification 4.1 Commands 4.2 Power down and Power up Sequence 4.2.1 Power up Sequence 4.2.2 Power down Sequence 4.3 Reset Circuit 4.4 Actual Application Example 4.4.1 VCC Supplied Externally 4.4.2 VCC Generated by Internal DC/DC Circuit 5. Reliability 5.1 Contents of Reliability Tests 5.2 Failure Check Standard 6. Outgoing Quality Control Specifications 6.1 Environment Required 6.2 Sampling Plan 6.3 Criteria & Acceptable Quality Level 6.3.1 Cosmetic Check (Display Off) in Non-Active Area 6.3.2 Cosmetic Check (Display Off) in Active Area 6.3.3 Pattern Check (Display On) in Active Area 7. Package Specifications 8. Precautions When Using These OEL Display Modules 8.1 Handling Precautions 8.2 Storage Precautions 8.3 Designing Precautions 8.4 Precautions when disposing of the OEL display modules 8.5 Other Precautions Warranty Notice
1) Outline Drawing: 2) Number of Pixels:
3) Panel Size: 4) Active Area: 5) Pixel Pitch: 6) Pixel Size: 7) Weight:
According to the annexed outline drawing 128 64
Function
Power Supply
9
VDD
7、8
VSS
28
VCC
1、10、29、30 NC
P
Power Supply for Logic This is a voltage supply pin. It must be connected to external source.
Ground of Logic Circuit
28
VCC
29
NC
30
N.C. (GND)
Drawing Number QG-2864KLBLG03
Material
Rev. A
Soda Lime / Polyimide
Scale Sheet Size 1:1 1 of 1 A3
2
1.5 Pin Definition
Pin Number Symbol I/O
HONG
20130605
Pin
Symbol
1
N.C. (GND)
2
C2P
3
C2N
4
C1P
5
C1N
6
VBAT
7
VSS
8
VSS
9
VDD
10
NC
11
BS1
12
BS2
13
CS#
14
RES#
15
D/C#
16
R/W#
17
E/RD#
18
D0
19
D1
20
D2
21
D3
22
D4
23
D5
24
D6
25
D7
26
IREF
27
VCOMH
Dimension ± 0.3
Angle
±1
Title
By Date
QG-2864KLBLG03 Folding Type OEL Display Module Pixel Number: 128 x 64, Monochrome, COG Package
Drawn
E.E.
Panel / E.
P.M.
34.5 23.0 1.4 (mm) 29.42 14.7 (mm) 0.23 0.23(mm) 0.21 0.21(mm) 2.18 (g)
1.3 Active Area / Memory Mapping & Pixel Construction
P0.23x128-0.02=29.42
BS2
14
RES#
13
CS#
15
D/C#
17
E/RD#
Current Reference for Brightness Adjustment
I
This pin is segment current reference pin. A resistor should be connected
between this pin and VSS. Set the current at 12.5A maximum.
Voltage Output High Level for COM Signal
O This pin is the input pin for the voltage output high level for COM signals. A
capacitor should be connected between this pin and VSS.
P0.23x64-0.02=14.7 0.23 0.21
Segment 129
( Column 1 )
Common 1
( Row 63 )
Common 63
( Row 1 )
Segment 2
( Column 128 )
Common 0
( Row 64 )
Common 62
31.42± 0.2 (V/A)
29.42± 0.2 (A/A)
10
5
1.4± 0.1
Item
Date
A
20130605
Remark Original Drawing
P0.23x128-0.02=29.42 "A"
(2.1) (1.1) 0.5± 0.5
0.21 0.23 P0.23x64-0.02=14.7
P This is a ground pin. It acts as a reference for the logic pins. It must be
connected to external ground.
Power Supply for OEL Panel
P
This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It
must be connected to external source when the converter is not used.
-
Driver 26
IREF
27
VCOMH
DC/DC Converter
6
VBAT
4/5 2/3
Interface
C1P / C1N C2P / C2N
11
BS1
12
6
2-R0.4± 0.05
14.7± 0.2 (A/A) 16.7± 0.2 (V/A) 18.2± 0.2 (Polarizer) 19.2± 0.2 (Cap Size)
23± 0.2 (Panel Size) (35)
4 4.75 6.887 11 12± 0.3
Active Area 1.3" 128 x 64 Pixels
Contact Side
Contact Side
0.23 0.21
0.1± 0.03
Detail "A" Scale (10:1)
Customer Approval Signature
Unless Otherwise Specified
Unit
mm
General Roughness
Tolerance
( Row 2 )
Detail "A" Scale (10:1)
1
Remove Tape t=0.15mm Max
1.4 Mechanical Drawing
0.5± 0.5 (1.54) (2.54)
34.5± 0.2 (Panel Size)
34.5± 0.2 (Cap Size)
33.5± 0.2 (Polarizer)
Product Specification
Part Name:
OEL Display Module
Customer Part ID:
Customer:
Approved by
Approved by
Revised History
Part Number Revision
QG-2864KLBLG03
A New
Polarizer t=0.2mm
Segment 129
( Column 1 )
Common 1
( Row 63 )
Common 63
( Row 1 )
Segment 2
( Column 128 )
Common 0
( Row 64 )
Common 62
( Row 2 )
Glue
Protective Tape 15x8x0.05mm
Power Supply for DC/DC Converter Circuit
P This is the power supply pin for the internal buffer of the DC/DC voltage converter.
This pin should be disconnected when VPP is supplied externally
Revision Content
Revised on 20130605
i
Contents
Revision History Contents 1. Basic Specifications
1.1 Display Specifications 1.2 Mechanical Specifications 1.3 Active Area / Memory Mapping & Pixel Construction 1.4 Mechanical Drawing 1.5 Pin Definition 2. Absolute Maximum Ratings 3. Optics & Electrical Characteristics 3.1 Optics Characteristics 3.2 DC Characteristics 3.3 AC Characteristics
0.85± 0.1 22± 0.2
1. Color: Blue 2. Driver IC: SSD1106G 3. FPC Number: QT1106P04 4. Interface:
8-bit 68XX/80XX Parallel, 4-wire SPI, I2 C 5. General Tolerance: ± 0.30
12± 0.2
1
30
D4 D5
D6 D7
IREF V COMH
V CC NC
N.C . (GND)
D1 D2
R /W#
C S# R ES#
NC B S1
C 2P C 1P V BAT V SS
E /RD#
C 2N C 1N V SS
2± 0.3
Notes:
(6.25)
16± 0.1 (Alignment Mark) P0.70x(30-1)=20.3 ± 0.05(W0.40± 0.03)
ii
1. Basic Specifications
1.1 Display Specifications 1) Display Mode: 2) Display Color: 3) Drive Duty:
Passive Matrix Monochrome (White) 1/64 Duty
1.2 Mechanical Specifications
3.3.1 68XX-Series MPU Parallel Interface Characteristics 3.3.2 80XX-Series MPU Parallel Interface Characteristics 3.3.3 Serial Interface Characteristics (4-wire SPI) 3.3.4 I2C Interface Characteristics 4. Functional Specification 4.1 Commands 4.2 Power down and Power up Sequence 4.2.1 Power up Sequence 4.2.2 Power down Sequence 4.3 Reset Circuit 4.4 Actual Application Example 4.4.1 VCC Supplied Externally 4.4.2 VCC Generated by Internal DC/DC Circuit 5. Reliability 5.1 Contents of Reliability Tests 5.2 Failure Check Standard 6. Outgoing Quality Control Specifications 6.1 Environment Required 6.2 Sampling Plan 6.3 Criteria & Acceptable Quality Level 6.3.1 Cosmetic Check (Display Off) in Non-Active Area 6.3.2 Cosmetic Check (Display Off) in Active Area 6.3.3 Pattern Check (Display On) in Active Area 7. Package Specifications 8. Precautions When Using These OEL Display Modules 8.1 Handling Precautions 8.2 Storage Precautions 8.3 Designing Precautions 8.4 Precautions when disposing of the OEL display modules 8.5 Other Precautions Warranty Notice
1) Outline Drawing: 2) Number of Pixels:
3) Panel Size: 4) Active Area: 5) Pixel Pitch: 6) Pixel Size: 7) Weight:
According to the annexed outline drawing 128 64
Function
Power Supply
9
VDD
7、8
VSS
28
VCC
1、10、29、30 NC
P
Power Supply for Logic This is a voltage supply pin. It must be connected to external source.
Ground of Logic Circuit
28
VCC
29
NC
30
N.C. (GND)
Drawing Number QG-2864KLBLG03
Material
Rev. A
Soda Lime / Polyimide
Scale Sheet Size 1:1 1 of 1 A3
2
1.5 Pin Definition
Pin Number Symbol I/O
HONG
20130605
Pin
Symbol
1
N.C. (GND)
2
C2P
3
C2N
4
C1P
5
C1N
6
VBAT
7
VSS
8
VSS
9
VDD
10
NC
11
BS1
12
BS2
13
CS#
14
RES#
15
D/C#
16
R/W#
17
E/RD#
18
D0
19
D1
20
D2
21
D3
22
D4
23
D5
24
D6
25
D7
26
IREF
27
VCOMH
Dimension ± 0.3
Angle
±1
Title
By Date
QG-2864KLBLG03 Folding Type OEL Display Module Pixel Number: 128 x 64, Monochrome, COG Package
Drawn
E.E.
Panel / E.
P.M.
34.5 23.0 1.4 (mm) 29.42 14.7 (mm) 0.23 0.23(mm) 0.21 0.21(mm) 2.18 (g)
1.3 Active Area / Memory Mapping & Pixel Construction
P0.23x128-0.02=29.42
BS2
14
RES#
13
CS#
15
D/C#
17
E/RD#
Current Reference for Brightness Adjustment
I
This pin is segment current reference pin. A resistor should be connected
between this pin and VSS. Set the current at 12.5A maximum.
Voltage Output High Level for COM Signal
O This pin is the input pin for the voltage output high level for COM signals. A
capacitor should be connected between this pin and VSS.