常见的arcgis安装错误1904的解决方法

[经验共享] 常见的arcgis 安装错误的解决方法【转载】 [复制链接]

前一阵子帮一同事安装ArcGIS License时，老是提示如下描述信息：
错误描述信息:
The server (lmgrd) has not been started yet, or
the wrong port@host or license file is being used, or the
port or hostname in the license file has been changed.
Feature: ARC/INFO
Server Name: server1
License Path @server1
FLEXlm Error: -15, 10. System Error: 10061"WinSock: Connection refused."
感觉甚是奇怪。奇怪的理由主要有两点：1、安装过程中并未报错。2、license文件正确无误， 在其它机器上破解后都能使用。到网上搜索一下相关资料，没有找到相关解决方法。查找License安装的相关帮助文档，找到下面的相应对策，发现还是不能解决问题。后来也就不了了之。
· Check the status of your hardware key.
· Perform a server status check to see if your License Manager is running.
· If necessary, reboot your computer to restart the License Manager.
· Verify the contents of your license file.
可是有一天，自己也碰到了这个问题，搞了半天还是没结果，真是郁闷！不过后来问题总算是解决了，现将解决步骤贴出来，以供大家参考：
1、 点击”开始”—>”运行”，输入”cmd”，在弹出的Dos界面中输入Ipconfig/all，如下图，找到网卡的虚拟地址。
2、 右键单击“我的电脑”，选择“属性”，在弹出的属性页面框中选择“硬件”项，点击“设备管理器”。
3、 在弹出的“设备管理器”窗体中，选择“网络适配器”—>网卡。
4、 右键点击相应的网卡，选择“属性”，在弹出的页面中选择“高级”—>“Network Address”，填入相应的值，如“00F0F4E41793”，如下图：
5、重装ArcGIS License，破解！OK
=======================================================
Provide your license server administrator with the following informatior
The desired vendor daemon is down
1] Check the Imgrd log file, or 2] Try Imreread
Vendor:Host: ARCGIS : localhost
License path: @localhost
FLEHIm error: -97,380. System Error: 10061 ""
=======================================================
怎么回事
？
Arcgis 9.1安装及完美破解

Step 1: Mount the ESRI ArcGIS Desktop v9.1 image or run the setup from your burned copy now, and install as normal.
第一步：*.BIN *.CUE为虚拟镜像文件，请安装Alcohol 120%等虚拟光驱工具载入它们，打开，安装软件！
Step 2: Run the supplied LMSetup.exe from the CRACK dir on the CD, which installs the ESRI license server in ...\Program Files...\ESRI\License\arcgis9x
Choose our supplied license.lic when the setup prompts for it, and DO NOT REBOOT when asked.
第二步：安装/Crack中的LMSetup.exe，在安装过程提示需要licens

e.lic，指向Crack中的icense.lic.安装完先不要重启。
Step 3: Copy the supplied license.lic, and ARCGIS.EXE file from the CRACK dir to the path where the License manager was
installed (mentioned in Step 1), and choose YES when prompted to overwrite any files (and ignore all the .lic files that reside in the dir!)
NOW REBOOT!
第三步：将/Crack目录中的license.lic, 和ARCGIS.EXE文件复制到你安装License manager的那个目录（你第二步安装的目录）覆盖，默认路径：C:\Program Files\ESRI\License\arcgis9x
然后重启系统。
Step 4: Install the supplied registry file ESRIFloat.reg, by doubleclicking it, and choosing YES when prompted if it should be installed in registry.
第四步：双击ESRIFloat.reg将注册加入注册表
Step 5: Launch StartMenu -> ArcGIS -> License Manager 9x -> Run License Manager Tools
第五步：打开 开始-> ArcGIS -> License Manager 9x ->运行License Manager Tools
Step 6: Choose tab Service/License File, and check "Configuration using Services", and choose the ArcGIS License Manager.
第六步：打开后，点到Service/License File项，选 "Configuration using Services"这个类型，并选择ArcGIS License Manager.
Step 7: Switch to tab Configure Services, make sure ArcGIS License Manager is in the Service Name listbox.
第七步：然后再点到：Configure Services项，确保Service name处为ArcGIS License Manager
Step 8: Browse to the correct License file path where you copied the license.lic file (propably the dir mention in step 1), and choose it as license.
第八步：将“Path to the license File”这个路径指向第三步你覆盖后的license.lic路径(默认路径：C:\Program Files\ESRI\License\arcgis9x\license.lic)。
Step 9: Check Start Server at Power up.
第九步：还是在第八步的那个界面上，选中“Check Start Server at Power up”。
Step 10: Click Save Service to save the settings.
第十步：还是在第八步的那个界面上，完成后点“Save Service”
Step 11: Test the server by choosing the Start/Stop/ReRead tab, Click Stop server, then ReRead license file, then Start Server.
After that move to the tab Server Diagnostics and press the Perform Diagnostics button. If everything is done right, it should list all ok features.
第十一步：现在选到“Start/Stop/ReRead tab”标签，先Stop server, 然后 ReRead license file，最后Start Server，如果提示：server start successful.则说明加载成功！！
Step 12: Have a cup of coffee and enjoy ESRI ArcGIS Desktop v9.1... =)
第十二步：搞定。
好东西，一般人我不告诉他
把license卸了再装，记得把注册表也清理一下
noexecute=optin 改为noexecute=alwaysoff 我的电脑右键属性,高级,启动故障恢复,设置,编辑!file:///C:/DOCUME~1/ADMINI~1/LOCALS~1/Temp/ksohtml/wps_clip_image-13653.png