设备操作指导卡中英文对照
西门子专业词汇中英文对照表
西门子专业词汇中英文对照表西门子专业词汇中英文对照表英文词汇中文翻译10-bit character frame 10位字符帧20 mA interface 20 mA接口3964? driver 3964?驱动程序4-wire transducer 4线制传感器absolute address 绝对地址absolute addressing 绝对寻址absolute coding 绝对编码absolute encoder adjustment 绝对编码器调整absolute incremental mode 绝对增量模式absolute value sensor 绝对编码器absolute zero shift 绝对零漂移Accept button “接受”按钮access protection 存取保护accumulator 累加器accumulator instruction 累加器指令acknowledged 已确认acknowledgement 确认acknowledgement area of a dialog box 对话框确认区acknowledgement group 确认组acknowledgement key 确认键acknowledgement tag 确认变量acknowledgement theory 确认理论acknowledgement time 确认时间ackowledgement bit 确认位acquisition cycle 采集周期action block 动作块action monitoring 动作监视action time 动作时间activate 激活activate machine data 激活机器数据activate time-of-day interrupt 激活时钟中断active ... 活动...active receiver 主动接收器active redundancy 活动冗余active star coupler 活动星型耦合器actual parameter 实际参数actual position 实际位置actual value 实际值actual value display 实际值显示actual value monitoring 实际值监视actuating signal 起动信号actuator sensor interface AS接口acyclic 非循环adapter cable 适配器电缆adapter card 适配卡additional document 其它文档add-on terminal 附加端子address assignment list 地址分配列表address ID 地址IDaddress identifier 地址标识符address monitoring 地址监视address type 地址类型addressing 寻址addressing error 寻址错误Advanced Manufacturing Research 高级制造研究Advanced Planning & Scheduling 高级计划与排程Advisory Research Group 顾问研究集团AGAG connection AGAG连接aggregate current 总电流agile manufacturing 灵活制造alarm 报警alarm event 报警事件Alarm groups editor 报警组编辑器Alarm Logs editor 报警日志编辑器alarm view 报警视图alarm window 报警窗口allocation 分配alternating current 交流alternative branch 替代分支alternative path 备择路径Analog alarms editor 模拟量报警编辑器analog input module 模拟量输入模块analog output module 模拟量输出模块analog signal 模拟量信号AND operation AND操作AND truth table AND真值表angular circular connector 有角圆形连接器angular power connector housing 角形电源接头外壳ANY pointer ANY指针Any transition 任意跳转API function API函数application 应用application memory 应用程序存储器application module 应用模块Apply button “应用”按钮approach velocity 逼近速度archiving 归档area 区域area-crossing indirect addressing 跨区域间接寻址area-crossing register-indirect addressing 跨区域寄存器间接寻址array element 数组元素ASCII driver ASCII驱动程序ASCII text file ASCII文本文件AS-i bus AS-i总线AS-i module AS接口模件AS-i system AS-i系统Asian characters 亚洲语言字符assign parameters 分配参数assignment list 分配列表asymmetrical signal 非对称信号AT bus AT总线attribute 属性authorization 授权authorization level 授权级别automatic single block 自动单独块automatic speed control 转速控制automation system 自动化系统autorepeat 自动重复AUX bus 辅助总线auxiliary networks 辅助网络available capability 可用能力available UDP connection 可用的UDP连接axis label 轴标签B stack B栈background color 背景色background task 后台任务backplane bus 背板总线backspace key Backspace键back-up battery 备用电池backwards 向后base connector 底座连接器basic cabinet 基础机柜basic chart 基本计划basic control 基本控制basic module 基础模块basic operation 基本操作basic project 基本项目basic version 基本版本batch 批次batch control 批控制batch data 批数据batch data management 批数据管理Batch data processing 批数据处理batch management 批管理batch overview 批总览batch planning list 批计划列表batch process 批处理batch status list 批状态列表battery low 电池电量不足battery module 电池模块battery power supply 电池电源baud 波特BERO signal BERO信号BFOC connector BFOC连接器bill of lading 提货单bill of material 物料单bill of resources 资源清单binary code 二进制代码binary coded decimal 二进制编码的十进制binary form 二进制形式binary result 二进制结果binary result bit 二进制结果位binary-coded decimal 二进制编码的十进制bit accumulator 位累加器bit address 位地址bit combination 位组合bit instruction 位指令bit memory 位存储器bit memory address area 位存储器地址区bit message procedure 位消息程序bit pattern 位模式bit time unit 位时间单位bit/s 位/秒bit-by-bit 逐位bit-coded command 位编码命令bit-coded setting 位编码设置block architecture 块结构block call command 块调用命令block catalog 块目录block check 块检查block comment 块注释block diagram 方框图block header 块标题Block icon 块图标block input 块输入block interface 块接口block name 块名称block number 块编号block output 块输出block protection 块保护block type 块类型block type import 块类型导入block variable 块变量block-oriented execution model 面向块的执行模型blue screen 蓝屏board driver 板驱动程序board retainer 电路板护圈Boolean logic 布尔逻辑boot diskette 启动盘boot loader 引导装载程序Boot Sequence 引导顺序booting 引导border 边框border width 边框宽度box ID 接线盒IDbranch 分支branch&merge 分支和合并breakpoint 断点bridge 桥接broadcast 广播brochure 手册broken cable 断路电缆Browse 浏览buffer 缓冲区buffer overflow 缓冲区溢出built-in pointer 内置指针bus connection 总线连接bus connector 总线接头bus link 总线连接bus node 总线节点bus parameters 总线参数bus protocol 总线协议bus system 总线系统business model 业务模型business objects 业务对象button in the toolbar 工具栏中的按钮byte address 字节地址C7 program C7程序cable grip 电缆夹cable guide 电缆导管call statement 调用语句cam controller 凸轮控制器Cancel button “取消”按钮cancel Time-of-Day interrupt 取消时钟中断cascading menu 层叠式菜单catalog window 目录窗口cause of the problem 问题原因CBA CBA (基于组件的自动化)CCD camera CCD相机central controller 中央控制器certificate of analysis 检验报告change log 更改日志change of operating mode 操作模式变化changeover difference 切换差程channel DLL 通道DLLcharacter frame 位字符帧character string 字符串characteristic 特性chart 图表chart element 图表元素chart folder 图表文件夹chart overview 图表总览chart properties 图表属性chatter monitoring 抖动监视check box 复选框check mark 复选标记chronological reporting 按时间顺序报告circular connector 圆形连接器clearance 空隙click 单击climatic environmental conditions 环境气候条件clipboard 剪贴板clock 时钟Clock Generator 时钟生成器clock memory 时钟存储器clock prompt 时钟提示clock pulse 时钟脉冲clock pulse generator function 时钟脉冲生成器功能clock synchronized 时钟同步clock timing 时钟定时clock-pulse rate 时钟脉冲速率Close button “关闭”按钮closed-loop controller 闭环控制器code generation 代码生成coding key 编码键coding plug 编码插头coil inrush 线圈涌入cold restart 冷启动color display 彩色显示color-coding 颜色编码combo box 组合框command boundary 命令约束command button 命令按钮command macro 命令宏command output disable 命令输出禁用command set 命令集comment 注释comment block 注释块commissioning 开机调试committed capability 承诺能力common data management 公用数据管理common mode error 共模错误common mode interference 共模干扰common mode voltage 共模电压common resource 公用资源communication driver 通讯驱动程序communication error 通讯错误communication function 通讯功能communication function block 通讯功能块communication job 通讯作业communication peer 通讯对等方communication procedures 通信程序communication service 通讯服务communications 通讯compact information 压缩信息comparator 比较器comparison error 比较错误comparison operation 比较操作compile 编译compiler 编译器complex data type 复杂数据类型component project 组件项目component view 组件视图compress 压缩condition code bit 条件代码位conditional call 条件调用conducted 传导configuration 组态configuration data 组态数据configuration error 组态错误configuration parameter 组态参数configuration table 组态表configured connection 已组态的连接configuring PC 组态PCconnecting cable 连接电缆connecting two programming devices 连接两台编程设备connection box 接线盒connection resource 连接资源connection table 连接表Connections editor 连接编辑器consistency check 一致性检查consumables 消耗品context menu 右键快捷菜单context-sensitive information 上下文相关的信息Continue button “继续”按钮continuous counting 无限计数continuous process 连续过程continuous turning 连续转动contrast control 对比度控制control block 控制块control cabinet 开关柜control command 控制命令control element 控制元素control libraries 控制库control loop 控制环control module 控制模块control operation 控制操作control program 控制程序control recipe 控制配方control recipe phase 控制配方阶段control signal 控制信号control system 控制系统controlled positioning 受控定位controller output 控制器输出control-menu box 控制菜单框convention 约定conversion operation 转换操作Converter manual 转换器手册cooling 冷却coordination control 协调控制copy cursor 复制光标count mode 计数模式count up 向上计数count value 计数值counter 计数器counter and comparison instruction 计数器和比较指令counter function 计数器功能counter input 计数器输入counter instruction 计数器指令counter library 计数器库counter module 计数器模块counter number 计数器号counter number error 计数器编号错误counter output 计数器输出counter up 向上计数counter word 计数器字counting range 计数范围counts 计数coupler 耦合器cover foil 覆盖箔CPU operating system CPU操作系统creep speed 慢速creepages and clearances 爬电距离及电气间隙criteria analysis 标准分析crosshair cursor 十字准线光标cross-reference list 交叉索引列表current consumption 电流消耗Current Good Manufacturing Practices 现行良好制造规范current path 电流路径cursor 光标cursor control 光标控制custom installation 自定义安装customized 自定义cycle 循环cycle control point 循环控制点cycle duration 循环持续时间cycle time 循环时间Cycles editor 循环编辑器cyclic program processing 循环程序处理dash 划线data backup 数据备份data block 数据块data block area 数据块区data block element 数据块元素data block instruction 数据块指令data block length 数据块长度data block register 数据块寄存器data byte DBB 数据字节DBBdata channel 数据通道data collection/ccquisition 数据收集/采集data communication equipment 数据通讯设备data cycle 数据循环data cycle time 数据循环时间data double word DBD 数据双字DBDdata exchange 数据交换data exchange broadcast 数据交换广播data integrity 数据完整性Data Log editor 数据记录编辑器data manager 数据管理器data model 数据模型data record 数据记录data record name 数据记录名data record number 数据记录号data retention 数据保持data storage area 数据存储区data structure 数据结构data terminal equipment 数据终端设备data transfer 数据传输data type 数据类型data type declaration 数据类型声明data word 数据字database 数据库DB access with one statement 用一条语句进行的DB访问DB access with two statements 用两条语句进行的DB 访问DB editor DB编辑器DC power supply 直流电源DDE server DDE服务器deactivate 取消激活debug 调试deceleration time 减速时间decimal places 小数位数decompilation 反编译default addressing 缺省寻址default data 缺省数据Default data button “缺省数据”按钮default setting 出厂设置default settings 缺省设置deflagration 爆燃delay element 延迟元素derating 降低额定值deselect 取消选择destination 目标destination area 目标区destination parameter 目标参数destination run-up 目标接近detail display 详细信息显示detailed window 详细信息窗口deterministic behavior 确定性特性device 设备device manager 设备管理器device name 设备名称device number 设备编号diagnostic buffer 诊断缓冲区diagnostic entry 诊断条目diagnostic ID 诊断IDdiagnostic interface 诊断界面diagnostic interrupt 诊断中断diagnostic message 诊断消息diagnostics 诊断diagnostics address 诊断地址diagnostics function 诊断功能dialog box 对话框differential input 差分输入differential voltage 差分电压digital display 数字显示digital input module 数字量输入模块digital input/output module 数字量输入/输出模块digitaloutput module 数字量输出模块DIN rail DIN导轨DIP switch DIP开关direct addressing 直接寻址direct current 直流direct data exchange 直接数据交换direct help cursor 直接帮助光标direct I/O access 直接I/O访问direct keys 直接键directory icon 目录图标discontinued 停止Discrete alarms editor 离散量报警编辑器dispatching production 调度生产display 显示display axis 显示轴display block 显示块display class 显示等级display element 显示元素display mode 显示模式display type 显示类型distributed I/O device 分布式I/O 设备distributed I/Os 分布式I/Odisturbance variable 干扰变量dock 停放dot 点double evaluation 双重判断Double Integer 双精度整数double-click 双击down-counter 向下计数DP delay time DP延迟时间DP identifier DP标识符DP master system DP主站系统DP slave interface DP从站接口DP standard slave DP标准从站DP(DRIVE) DP(驱动器)DP/AS-Interface link DP/AS接口连接drag-and-drop 拖放driver generator 驱动程序生成器drop-down menu 下拉式菜单dummy module 占位模块dummy symbols 伪符号duplex core 双工线芯duration of message 消息持续时间dwell time 停留时间dynamic connection 动态连接dynamic parameter 动态参数dynamization 动态化earth 接地edge detection 沿检测edge formation 沿形成editing window 编辑窗口editor 编辑器EEPROM submodule EEPROM子模块electrical data 电气数据electrical link module 电气连接模块electromagnetic interference field 电磁干扰场electronic catalog 电子目录electronic current limitation 电流限制electronic module 电子模块element 元素elementary data type 基本数据类型ellipse 椭圆EM 3xx EM 3xxE-Mail 电子邮件e-mail address 电子邮件地址e-mail connection 电子邮件连接emergency stop button 紧急停止按钮emergency stop circuit 紧急停止电路emergency stop push button 急停按钮enable input 使能输入enable input evaluation 启用输入判断enable out 使能输出encoder revolution 编码器旋转encoder with asymmetrical output signals 具有非对称输出信号的编码器encoder with symmetrical output signals 具有对称输出信号的编码器encryption 加密end of segment 区段终点endstop 固定挡块engineering station 工程站engineering toolset 工程工具集enter key Enter键Enterprise Production Systems 企业生产系统entry address 条目地址entry field 输入域entry ID 条目IDequidistant mode 等距离equipment class 设备分类equipment control 设备控制equipment manual 机器手册equipment module 设备模块equipment operation 设备操作equipment phase 设备阶段equipotential bonding 等电位连接equipotential bonding strip 等电位铅条error analysis 错误诊断error detection 错误检测error diagnostics 错误诊断error event 错误事件error filter 错误过滤器error information 错误信息error log 错误日志error organization block 错误组织块error register 错误寄存器ERROR-SEARCH mode ERROR-SEARCH模式ES 工程系统event synchronous 同步事件event triggered 事件触发event-driven 事件驱动event-driven program processing 事件驱动的程序处理Ex analog input 防爆保护模拟量输入Ex analog output 防爆保护模拟量输出Ex digital input 防爆保护数字量输入Ex digital output 防爆保护数字量输出Ex partition 防爆保护分区exception handling 例外处理exclusion addresses 排除地址executability 可执行性execution load 执行负载execution monitor 执行监视execution status 执行状态execution time 执行时间execution time limit 执行时间限制expand docked window 展开停放窗口expansion 扩展expansion bus 扩展总线expansion dialog box 扩展对话框export file 导出文件expression 表达式extended temperature range 扩展的温度范围extender 扩展器extension module 扩展模块external fault 外部故障external input 外部输入external view 外部视图extraction tool 插拔件工具faceplate 面板fan subassembly 风扇部件fan-out connector 接线端块fan-out unit 扇出单元fault 故障fault current 故障电流fault message 故障信息fault-tolerant system 容错系统FBD editor CSF编辑器FC 功能fetch principle 获取原理FIBER OPTIC CABLE 光缆field 现场field bus isolating transformer 现场总线隔离变压器field device 现场设备field element 现场元件fieldbus 现场总线filler element 填充元素filter criteria 过滤条件finished good waivers 成品弃权声明书finished goods 成品first input bit scan 第一个输入位扫描fixed functionality 修复的功能fixed setpoint control 固定设定值控制fixed-point number 定点数flag 标志flash 闪烁flash card 闪存卡flash DIMM modules 闪存DIMM模块flash EPROM 闪存EPROMflash memory 闪存flexible connection 软连接floating-point format 浮点格式FMS client FMS客户机FMS connection FMS连接FMS server FMS服务器focus 聚焦folder 文件夹following block 后续块following error limit 跟踪误差限制follow-up mode 跟进模式font scheme 字体方案for data 用于数据FOR statement FOR语句force value 强制值forced execution sleep time 强制执行休眠时间forcing 强制formal operand 形式操作数formatting 格式化formula 公式forwards 向前four-fold evaluation 四重判断free cycle 空闲周期free edit mode 自由编辑模式free port 空闲端口frequency meter 频率计front connector module 前连接器模块full-duplex mode 全双工模式full-stroke keyboard 全程键盘function block 功能块function block library 功能块库function designation 功能名称function diagram 工作原理图function grounding 功能接地function key 功能键function module 功能模块function value 函数值functional unit 功能单元fuse blown 保险丝熔断fusible link 熔线fuzzy control 模糊控制gain 增益gate stop function 门停止功能gateway 网关GD circle GD电路GD element GD元素GD package GD包geared synchronous motion 齿轮同步运动general monitoring 常规监视generate 生成generator 生成器generic block 通用块generic properties 通用属性generic station description GSD文件generic term 专业术语global communication 全局通讯global data identifier 全局数据标识符global data table 全局数据表GOTO statement GOTO语句graph group 图形组graphic 图形graphic display 图形显示graphic editor 图形编辑器graphic language 图形语言Graphic List editor 图形列表编辑器graphic object 图形对象graphic plotter 绘图仪graphics device 图形设备Graphics editor 图形编辑器graphics list 图形列表grid 网格ground fault detector 接地故障检测器grounding wrist strap 接地腕带group acknowledgement 组确认Groups editor 组编辑器guide line 准则H station H站half-duplex mode 半双工模式half-tone color 半色调颜色handwheel 手轮hard disk 硬盘hard disk access 硬盘访问hard disk drive 硬盘驱动器hard disk memory 硬盘存储器hardware catalog 硬件目录hardware configuration 硬件组态hardware fault 硬件故障hardware gate 硬件门hardware information 硬件信息header 标题header area 标题区header-end 标题结尾Help button “帮助”按钮hierarchy branch 体系分支hierarchy folder 体系文件夹hierarchy level 体系层级high-availability 高可用性higher level designation of item 条目的更高层名称higher order 更高顺序higher priority 更高优先级highest station address 最高站地址HiGraph HiGraphHold button “保持”按钮HOLD mode HOLD模式hot swapping 热交换hub 集线器hue 色调I/O area I/O区I/O bus I/O总线I/O: external input I/O：外部输入I/O: external output I/O：外部输出IBM character set IBM字符集identification 标识identification data 标识数据identifier 符号，名称identifier-related diagnostic data 标识符相关诊断数据IF Slot IF插槽illuminated pushbutton 发光按钮开关image evaluation system 图像评估系统image processing 图像处理image processing system 图像处理系统immediate addressing 立即寻址import file 导入文件import/export wizard 导入/导出向导in/out parameter 输入/输出参数inching mode 微动模式incoming event 进入事件incremental edit mode 增量编辑模式incremental position encoder 增量编码器incremental text selection 增量文本选择increments/revolution 增量/转indent 缩进indirect addressing 间接寻址inductive load 电感负载Industrial Ethernet 工业以太网inert 惰性infobox 信息框information function 信息功能infotext 信息文本initial diagnostic address 初始诊断地址initial message 初始消息initial start 初始启动initialization phase 初始化阶段initialize 初始化initiate 启动in-process waiver requests 进行中弃权请求input 输入input bit 输入位input byte 输入字节input delay 输入延迟input double word 输入双字input filter 输入过滤器input module 模拟的输入input parameter 输入参数input point 输入点input word 输入字input/output 输入/输出input/output module 输入/输出模块inrush current 突入电流insert mode 插入模式insert point 插入点installation frame 安装框架installation instructions 安装说明installation work 安装工作instance 实例instance data 背景数据instance data block 背景数据块instance name 实例名称instruction 指令instruction sequence 指令顺序Instructions for system upgrade 系统升级说明instrumentation and control 仪器和控制integer 整数integrated user memory 集成用户存储器integration 集成intelligent DP slave 智能DP从站intelligent I/O module 智能I/O模块interactive step 交互式步骤interface 接口Interface DB 接口DBinterface for memory submodules 存储器子模块接口interface module 接通interference frequency suppression 干扰频率抑制interference immunity 抗干扰interference voltage 干扰电压interlock 互锁interlock time 互锁时间internal error 内部错误internally current limited 内部电流限制interprocessor communication flag 处理器间通讯标志interrupt 报警interrupt organization block 中断组织块interrupt stack 中断堆栈invitation to tender 招标ISA module ISA模块ISA slot ISA插槽isochronous mode 同步模式isolation transformer 隔离变送器IT system IT系统jitter 抖动job number 作业号jump 跳转jump destination 跳转目标kernel 内核key business drivers 关键业务驱动因素Key Performance Indicator 关键性能指示器keyboard controller 键盘控制器keyboard driver 键盘驱动程序key-operated switch 钥匙键控开关keyword 关键字L terminal L端子label as address 标签作为地址labeling strip 标签条Ladder Diagram 梯形图Ladder Editor 梯形图编辑器language element 语言元素language subset 语言子集leakage current 漏电流learnability 可学习性length measurement 长度测量length of the network 网络长度level 层，平面level 1 functions 1级功能level 2 functions 2级功能level 3 functions 3级功能level 4 functions 4级功能level monitoring 电平调整level-controlled 电平控制library number 库号limit switch 限制开关line comment 行注释line style 线型line width 线宽linear addressing 线性寻址linear axis 线性轴linear scale 线性转换link cursor 链接光标link device 连接设备LINK-UP mode LINK-UP模式link-up system mode 连接系统模式liquid crystal 液晶list view 列表视图literal 文字的load circuit 负载电路load command 装载命令load current supply 负载电流源load instruction 装载指令load memory 装载存储器load monitor 监视器load object 装载对象load timer in binary format 装入二进制格式的定时器load user program 装载用户程序load wiring 负载接线local area network 局域网local bus 局部总线local data 局部数据local data bit 局部数据位local data byte 局部数据字节local data double word 局部数据双字local data stack 局部数据堆栈local PROFIBUS address 本地PROFIBUS地址local to block symbols 本地块符号local variable 局部变量location cursor 位置光标location designation 位置指定location-independent 位置独立locked 已锁定log on 登录logarithmic scale 对数刻度logic block 逻辑块logic operation 逻辑操作logical communication link 逻辑通讯连接login 登录long-term archive 长期归档loop 环路Loop control 循环控制loop display 循环显示loop-in-alarm 报警循环lot 批M7 DDE server M7 DDE服务器main chart 主图表main memory 主存储器main SETUP menu 主“设置”菜单Maintenance Station 维护站major tick marks 主核对符号malfunction 故障manufacturing automation protocol 制造自动化协议manufacturing cell 制造单元Manufacturing Execution Systems 制造执行系统Manufacturing Operations and Control domain 制造运营与控制领域marking 标记master 主站master computer 主计算机Master Control Relay 主控继电器master controller 主控制器master data 主数据master interface module 主站接口模块master project 主项目master recipe phase 主配方阶段material class 材料分类material definition 材料定义material lot 材料批号material model 材料模型Material Requirements Planning 物料需求计划material sublot 材料子批mathematical functions 数学函数maximize 最大化maximum execution load 最大执行负载MCR area MCR区MCR stack MCR堆栈MCR stack pointer MCR堆栈指针measured value resolution 测量值精度measurement type 测量类型measuring point 测量点measuring system 测量系统Media Access Control 媒体访问控制membrane keyboard 覆膜键盘memory area 存储区memory bit 存储器位memory byte 存储器字节Memory Cache 存储器缓存memory card 存储卡Memory card port 存储卡端口memory double word 存储器双字memory expansion 存储器扩展memory location 存储位置memory module 存储器模块memory reset 存储器复位menu 菜单menu assisted 辅助菜单menu bar 菜单栏menu entry 菜单条目menu item 菜单项menu title 菜单标题message 显示信息message acknowledgement 消息确认message bit procedure 消息位程序message buffer 消息缓冲区message burst 消息脉冲串message class 消息类别message format 消息格式message frame 消息帧message indicator 消息指示灯message line 消息行message number 消息号message number procedure 消息号程序message output 消息输出message procedure 消息程序message sequence report 消息顺序报告message status 消息状态message tag 消息变量message text 消息文本message-type block 消息类型块metal guide 金属导轨micro memory card 微型存储卡migration 移植mimic 模拟minimize 最小化minimum cycle time 最小循环时间minimum ignition energy 最小点火能量minimum sleep time 最小休眠时间minor tick marks 次核对符号missing encoder supply 缺少编码器电源missing load voltage L+ 缺少负载电压L+mode 运行方式mode of operation 操作模式mode selector 模式选择器model 模型models for Manufacturing Execution Systems 制造执行系统模型modem 调制解调器modifying times 修改时间modular closed-loop control 模块化闭环控制modular PID control 模块化PID控制modulator quiet time 调整器静态时间module 模块module backplane 模块背板module cl 模块种类module identifier 模块标识符module number 模块编号module parameters 模块参数module position 模块位置module status 模块状态monitor 监视器monitor interval 监控间隔monitor variables 监控变量monitoring logic 监视逻辑monitoring point 监视点monitoring time 监视时间monitoring type 监视类型monoflop 单稳态触发器motherboard 主板motion monitoring 运动监视motor block 电机块mouse 鼠标mouse driver 鼠标驱动程序MPI card MPI卡multicomputing 多值计算multicomputing interrupt 多值计算中断multidimensional field 多维域multi-instance 多实例multiple document interface 多文档界面multiple option 多选项multiple option list 多选项列表multiplexing 多路复用multi-point interface 多点接口multiproject 多项目multitasking 多任务处理multiturn encoder 多匝编码器multi-user system 多用户系统multi-vendor 多家厂商naming convention 命名约定NCM NCMnegative edge transition 负跳沿跳转nesting depth 嵌套深度NETPRO NETPROnetwork 网络network component 网络组件network configuration 网络组态network connection 网络连接network drive 网络驱动器network station 网络站network view 网络视图node 节点node address 节点地址node initialization 节点初始化noise 噪音no-load voltage 空载电压non-condensing 非结露non-configured connection 非组态的连接non-deterministic behavior 非确定性特性non-hazardous area 非危险区non-isolated 非隔离non-modal dialog box 非模态对话框NOP step NOP步骤NOP transition NOP跳转normally closed contact 常闭触点null instruction 空指令NW 电网或电源系统OB number OB编号OB priority OB优先级object linking and embedding 对象链接和嵌套object properties 对象属性object view 对象窗口OFF delay OFF延迟offline 离线offline mode 离线模式oil immersion 'o' 油浸'o'OK button “确定”按钮old value 旧值onboard I/O 板载I/Oon-delay timer 接通延迟定时器one's complement 一的补码online 在线online mode 在线模式on-the-fly control 实时测量OPC server OPC服务器Open button “打开”按钮open picture 打开图片open-loop control 开环控制Open-Loop Positioning 开环定位operating data 操作数据operating information range 操作信息范围Operating Instructions 操作指令operating resource 操作资源operating system 操作系统operating system run time 操作系统运行时间operating text 操作文本operation 操作operation in segmented rack 以分段机架运行operation message 操作消息operational limit 操作限制operational message 运作消息operations and detailed scheduling 实施和详细排程operator action 操作员动作operator authorization 操作员授权operator control and monitoring 操作员控制和监视operator control and monitoring system 操作员控制和监视系统operator control enable 操作员控制启用operator input 操作员输入operator mode 操作员模式operator protection 操作员保护operator unit 操作单元optical link module 光连接模块optical link plug 光连接插头optically isolated 光隔离optional software 可选软件order number 订货号organization block 组织块organizational chart 组织图organizational function chart 组织功能图outline view 大纲视图output 输出output bit 输出位output byte 输出字节output circuit 输出电路output coil 绕组，线圈output double word 输出双字output organizer 输出管理器output parameter 输出参数output range 输出范围output signal 输出信号Output Window 输出窗口output word 输出字overcurrent protection 过流保护overflow 溢出overflow page 溢出页override 倍率page footer 页脚pane 窗格panel 面板parallel branch 并联支路parallel connection 并联parameter assignment 参数分配parameter connection point 参数连接点parameter control 参数控制parameter description 参数描述parameter field 参数域parameter settings 参数设置parameter type 参数类型parameterization 参数化parity 奇偶校验partial process image 部分过程映像participant 参与者partition 分区PC adapter PC适配器PC carrier board PC载板PC DDE server PC DDE服务器PC slave board PC从板PC/PPI cable PC/PPI电缆peer 对等方peripheral 外设peripheral input byte 外设输入字节peripheral input double word 外设输入双字peripheral input word 外设输入字peripheral output byte 外设输出字节peripheral output double word 外设输出双字peripheral output word 外设输出字permanent instruction 永久指令permanent window 永久窗口Personal Computer 个人计算机personnel class 人员分类PG/OP communication PG/OP通讯phased-out product 逐渐停产的产品physical address 物理地址。
7600机器操作菜单-中英文对照
head alignment 头对准paper thkns 纸thknsprinter setup 打印机装备platen gap 压盘缝隙page line 页线interface 接口code page 密码页paper margin 纸边缘ppr size chk ppr 按规定尺寸制作 chk ppr align chk ppr 排列 chktimeout 暂时休息no margin adj 没有边缘 adjrefresn mrgninit settings init 设定test print 测试版nozzle check 喷嘴检查status check 状态检查job info 工作信息printer status打印机状态version 版本printable pg 可印刷的 pg ink left 墨水左边maint tank maint 箱usage count 用法计数use count clr 使用计数 clr job history 工作历史job hstry clr 工作 hstry clr total prints 总数版service life 服务生活paper config 纸 config paper number 纸数字thickess pat thickess 轻拍cut pressure 削减压力cut method 削减方法ppr feed adj ppr 喂 adj drying time 弄干时间suction 吸print adj 版 adjhead alignmet头 alignmet paper thkns 纸 thknsmaintenance 维护pwr cleaning pwr 清洁bk ink change bk 墨水变化cutter repl 裁剪者 repl。
轧机操作面板英汉对应
8
preparation reel
开卷器
bottom roll os jog
下辊操作侧
mandrel expand
涨开
top roll ds jog
上辊工作侧
mandrel collapse
缩上
bottom roll ds jog
下辊工作侧
mandrel position start
卷轴定位开始
检辊
24
pay off reel
开卷器
57
back up roll coupling
支撑辊连轴节
mandrel expand
涨开
coupling hook coupled
连接指示
mandrel collapse
缩上
58
back-up roll keeper plate
支撑辊保持缸
outboar bear closed
抬起
anti-clock joging
逆时针转动
lower
落下
14
pendulum shear drive on-off
摆动剪驱动开关
hold down roll spray on/off
压下辊喷油开/关
on-off
开/关
49
flatness roll roller brushes
板型辊刷辊
15
pendulum shear single cut
上辊降下
center
对中
bottom bur push
下辊顶起
blow-off on/off
吹扫开/关
bottom bur retract
操作手册参考资料-中英文
操作手册参考资料一、安全规范一般的安全规则1. 认识你的机器为了你的个人安全, 仔细阅读本手册。
熟知机器的应用与限制，以及与机器相关的潜在性危险。
2．保持工作区域干净.杂乱的区域以及工作台会引起意外。
3．勿在危险的环境使用勿在潮湿或下雨的地点使用，或将其暴露在雨中。
保持工作区域良好的照明。
4．非专业人员勿靠近所有参观者在工作区域内必须保持安全的距离。
5．勿强行操作机器让机器以其设计之速度下安全的执行工作。
6．使用正确的工具勿强行使机器或附加装置执行工作7．穿著适当的衣服避免佩带可能被移动部分卷入的宽松衣物、手套、项链、手镯或首饰。
建议穿著防滑鞋。
戴上包住长头发之发帽。
8．勿在工作状态保养机器机器应进行适当之保养，如润滑、调整10．维修、更换配件之前，或是组装和重新组装马达时，必须从电源处切断机器的电源.11．使用建议之配件，查阅手册上建议之配件。
12．不要让机器在无人看管下运转。
本机器自身安全规则（此项由贵厂根据自己机器特点编写）（英文版）1.1 SAFETY RULES1.1.1.GENERAL SAFETY RULESthoroughly and understand completely all instructions,rules, etc. contained in this manual. Failure to complycan result in accidents involving fire, electric shock, or serious personal injury. Keep owners manual and review frequently for continuous safe operation.1.KNOW YOUR MACHINE.For your own safety, read the owner’s manual carefully. Learn its application and limitations as well as specific potential hazards pertinent to this machine.2.KEEP WORK AREA CLEAN.Disorder area and working table will cause accident.3.DO NOT USE IN DANGEROUS ENVIRONMENTS.Do not use power tools in damp or wet locations, or expose them to rain. Keeps work area well illuminated.4.KEEP NON-PROFESSIONAL PEOPLE A WAY.All visitors should be kept at a safe distance from work area.5.DO NOT FORCE THE MACHINE.It will do the job better and be safer at the rate for which it was designed.E THE RIGHT TOOLS.Do not force the machine or attachments to do a job for which they were not designed.7.WEAR PROPER APPAREL.A void loose clothing, gloves ,neckties, rings, bracelets, or jewelry, which could be caught inmoving parts. Non-slip footwear is recommended. Wear protective hair covering to contain long hair.8.DON’T MAINTENANCE THE MACHINE IN RUNNING STA TESThe machine should be maintained such as lubrication, proper adjustment.9. BEFORE MAINTENANCE, ACCESSORY CHANGING OR ASSEMBLING AND REASSEMBLE MOTOR, BE SURE TO CUT OFF THE POWER FROM THE POWER RESOURCE.E RECOMMENDED ACCESSORIES.Consult the o wner’s manual for recommended accessories.11.NEVER LEA VE MACHINE RUNNING UNA TTACHED.1.1.2 ADDITIONAL SAFETY RULES FOR COLD FORMING MACHINE搬运与安装（使用环境可根据自己需要修改）注意英文版Transports and the installmentWarning电源检查在连接电源线之前，必须先确定机器与工厂的电源供应的电压是否相同.将电源线连接至 L1, L2, L3 和 PE。
HP5000操作面板菜单中英文对照表
HP5000操作面板菜单中英文对照表菜单一级菜单二级菜单或参数选项三级菜单或参数选项参数选项设 Device Setup TUR Installed NO，YES置设备设置是否使用收纸器否，是菜 Cutter ON，OFF单裁纸器打开，关闭Lang HP-GL/2语言 HP-GL/2PostScript@,AutomaicPostScript@,自动Drying Time Automatic,None干燥时间自动，无Manuel 255..2，1Min手动设定 255..2，1分I/O Setup NO I/O Card foundI/O 设置未找到I/O网卡Card ID网卡IDCard ID网卡IDCard Setup Configration网卡设置配置Advanced Reset Card高级设定重设网卡I/O timeout 0.5min…30minI/O超时设定 0.5分…30分Utilities Track Media Length Yes,No实用程序追踪介质长度是，否Usage Print usage,View usage使用情况打印，查看使用情况Menu Mode Short,Full菜单模式部分，完整Calibrations Printhead alignment校准打印头修正Color Calibrations颜色校准Accuracy Restorefactory精确校准恢复为出厂值Recalibration Create Pattern重新校准创建模板Measure Pattern测量模板设 Utilities Reset Web Svr Passwd置实用程序复位网络服务器密码菜 Test Prints HP-GL/2 Config单测试打印 HP-GL/2配置Service config服务器配置Usage Report使用情况报告Print Quality打印质量Statistics Ram Present,Service ID,Hard Disk,CodeRev状态内存提示，服务器ID，硬盘，修正代码Default Menu默认菜单Display Contrast Up,Down显示对比度调上，调下Clean Platen Auto,Manual清洁面板自动，手动Internal RIP Setting Start Printing Optimized,Immediately 内置RIP设置开始打印优化，直接After processing处理后Ink Emulation@ RGB@ Native sRGB墨水仿真@ Apple RGB@Adobe RGBColor Match RGBCMYK@ Native,Euro ScaleSWOP,TOYO@Color Calibration Off,On@颜色校准关闭，打开Black Replace.,黑色替换.,Enhanced增强PS Scale@ 100%..419%Fit to pagePS比例@ 100%..419%适合页面设 Nesting Queue mgmt #… 99,….1,0置拼图队列管理 Width,Longth菜宽度，长度单 Queue mgmt队列管理Nest OFF拼图关闭In Order 99…2，1min按顺序 99…2，1分HP GL/2Setting Paletts Software,Factory,PalettsA,PalettsBHP GL/2设定模板软件，制造厂，模板A，模板B Define Palette PalettsA,PalettsB Pen No.0 (15)定义模板模板A，模板B 笔编号0 (15)Width宽度 0.13..12mmHighth高度 255..1,0mmFactory Pen No.0 (15)出厂值笔编号0 (15)Merge ON/OFF合并开/关Page Format Size Ink Area,software页面格式尺寸着墨区，软件Extra Wide 1.0 X 1.4m扩展宽度 42in X 59in 44 X 62in1.2 X 1.7m 52 X 73m54 X 76 60 X 100inOversize OverA2,OverA1大尺寸页面Arch Best Arch,ArchA…E1JIS Best JISB,JISB4…B1ANSI Best ANSI,ANSIA…E设 Page Format ISO Best ISOA,ISOA4..A0置页面格式 Rotate 0 (270)菜旋转单 Margins Normal,Extended页边距正常，超出Nest Spacing Automatic拼图间距自动Manual 30……5,0mm手动设置Mirroring ON,OFF镜像打开，关闭Demo Palette演示模板Menu菜单Samples范例耗 Roll/Sheet Info Vendor Name材卷筒纸/单张纸制造商名称菜 Type of Media单介质类型Width宽度Printable可打印Profile Revision概貌文件修正Media Selection HW Coated(Econ)介质选择 HW CoatedCoated PaperAnd more其它……Delete Media *HW Coated(Econ)删除介质 *HW Coated*Coated Paper耗 Delete Media And more材删除介质其它……菜 Move Media单移动介质TUR Loaded= Yes,No装载收纸器= 是，否Form Feed & Cut Yes,No换页及裁切是，否墨 Light Cyan Cart Info HPNO.81 Ink Cartridge 盒浅青色墨盒信息 HPNO.81墨仓菜 Ink Level单剩余墨量Capacity墨盒原容量Part Number再订购产品号Manufactrue Date墨盒生产日期Light Magenta Cart Info …………..浅品色墨盒信息Yellow Cart Info ……………黄色墨盒信息墨 Magenta Cart Info ……………盒品色墨盒信息菜 Cyan Cart Info ……………单青色墨盒信息Black Cart Info ……………黑色墨盒信息Replace Ink Cartridge Yes,No替换墨盒是，否打 Printhead Info Light Cyan Info印墨头信息浅青色墨头信息头 Light Magenta Info菜浅品色墨盒信息单 Yellow Info黄色墨盒信息Magenta Info品色墨盒信息Cyan Info青色墨盒信息Black Info黑色墨头信息打 Recover Printhead All Printheads印恢复墨头全部墨头头 Cyan菜青色单 Magenta品色Yellow黄色Black黑色Light C浅青色Light M浅品色Replace PrintHeads Yes,No替换墨头是，否备注：仅在Utilities>Menu Mode(实用程序>菜单模式)设置为Full(完整)时，灰色部分的项目才显示在前面板上，默认设置为Full(完整)；标有@的项目需要PostScript驱动程序。
兄弟DCP-7055一体机操作面板中英文对照
A5 L
B5B6
16K(195×270mm)
16K(184×260mm)
16K(197×273mm)
设定纸盒中的纸张尺寸
2.环保Ecology
1.省墨功能
Toner Save
开On
关*Off
增加墨粉盒的可打印页数
2.休眠时间Sleep Time
3分钟*
用户可自行调整
节电
3.液晶屏对比度
LCD Contrast
3.用户User settings
4.硒鼓寿命Drum life
可用于检查硒鼓的剩余可用寿命比例
－□□□□■+
－□□□■□+
－□□■□□+*
－□■□□□+
－■□□□□+
调节液晶显示屏的对比度
4.更换墨粉盒
Replace Toner
继续Continue
停止*stop
设备将停止打印，
直到您更换墨粉盒
5.重置Reset
1.所有设置
All Settings
▲重置Reset
▼退出Exit
将设备设置恢复为出厂默认设置
0.语言Local language
选择所需语言
可用于更改液晶显示屏的语言
2.复印
Copy
1.质量Quality
自动*Auto
文体Text
照片Photo
票据Graph
选择符合原稿类型的复印分辨率
2.亮度Brightness
－□□□□■+
－□□□■□+
－□□■□□+*
－□■□□□+
－■□□□□+
调整复印件的亮度
HP M1005 MFP一体机操作面板中英文对照菜单
HP M1005 MFP一体机操作面板中英文对照菜单LaserJet M1005(CB376A)中英文设置LaserJet M1005(CB376A)Main menu( 主菜单)Copy setup( 复印设置)Default Quality( 默认质量)Text( 文本)Draft( 草稿)Mixed( 混合)Film photo( 胶片)Picture( 图片)Def. light/dark ( 默认调淡/ 加深设置)这个一般用最左边第二个档就可以，省粉。
Def. # of/copies ( 默认份数)Def. Reduce/Enlrg ( 默认缩小/ 放大比率)Original( 原件=100%)A4 > Ltr=94% Ltr > A4=97% Full pages=91% ( 全页=91%)2 pages/sheet (2 页/ 张)Portrait ( 纵向)Landscape ( 横向)4 pages/sheet (4 页/ 张)Portrait ( 纵向)Landscape ( 横向)Custom: 25-400% ( 自定义：25-400%)Reports( 报告) Demo page( 演示页)Menu structure( 菜单图)Config report( 配置页)System setup( 系统设置)Language( 语言)Pager setup( 纸张设置)Def. paper size ( 默认纸张尺寸)Letter 纸A4 纸Legal 纸Def. paper type( 默认纸张类型) Plain ( 普通纸)Preprinted( 预打印纸)Letterhead( 信头纸)Transparency( 投影胶片)Prepunched( 预先打孔纸)Labels( 标签)Bond( 证券纸)Recycled( 再生纸)Color( 彩纸)Light( 轻磅纸)Heavy( 重磅纸)Cardstock( 卡片纸)Envelope( 信封)Rough( 粗糙纸)Print Density( 打印浓度)Service( 服务)Restore defaults( 恢复默认值)Cleaning Mode( 清洁模式)Less paper curl( 较少纸张卷曲)Archive print( 存档打印)Main menu( 主菜单)Copy setup( 复印设置)HP M1005 机器常见问题及问题维修排除方法HP 1005MFP一体机恢复出厂设置进行清零操作：操作步骤：1 在打印机就绪的状态下（液晶屏幕显示Ready ）按下“菜单/ 进入”键；2 找到“ Main menu Service ” 按下“菜单/ 进入”键；3 找到“ Service Restore Default ” 按下“菜单/ 进入”键两次然后开始恢复出厂设置；4 等到一体机恢复到就绪状态（液晶屏幕显示Ready ）则恢复完成。
Trumpf吊塔使用手册中英文对照版
Ceiling-mounted pendantsTRUMPF吊塔使用手册User Manual目录目录1 概述 (1)1.1正确使用仪器设备..........................1-22 吊塔的使用 (3)2.1试运转 (3)2.2水平移动 (3)2.2.1 正确的操作指导...........................4-6 2.3气动刹车. (7)2.4 垂直移动.................................8-10Important Information 概述概述正确使用仪器设备TRUMPF KREUZER 医疗系统产品按DIN ISO 9001标准进行开发、设计、推广.保证了产品具有以下特点：- 品质高标准，经久耐用.- 操作简便.- 功能化设计.- 最优化配置.产品符合MPG 要求，取得CE 认证.使用产品时，请认真阅读使用手册.TRUMPF KREUZER 吊塔可以承载医疗设备.其中已配置有电源和医用气体.吊塔可停放在其活动范围内的任何位置，以达到最广泛的使用.吊塔的负载设计有一定的承载能力.超过设计限度则会引起轴承及吊塔的损坏.甚至影响到使用者的人身安全.1Important Information Products of the TRUMPF KREUZER Medizin Systeme GmbH + Co. KG are manufactured to give a long and trouble-free service life. Development, design and production by TRUMPF KREUZER Medizin Systeme GmbH + Co. KG have been certified in accordance with DIN ISO 9001 and EN 46001.This guarantees:•highest quality and a long service life,•easy operation,•functional design and •optimisation for the intended purpose.The products fulfil the requirements of the Medizinproduktegesetz MPG (Law on Medical Products) and bears the CE sign.Please read this user manual carefully from the beginning, in order to familiarise yourself step-by-step with the many and variedfunctions.The ceiling-mounted pendants can be used safely!Reference is made to any residual dangers at the appropriate points in the manual. Please observe the following instructions!1.1Proper use of the equipment TRUMPF KREUZER-ceiling-mounted support-systems are used to hold medical equipment.Electric cables and hoses for medical gases are installed in the ceiling-mounted support-systems as far as a plug connection on the support-system head to supply this equipment. The equipment can then be plugged in using a short lead. This largely rules out the risk of cables trailing down.Instruments and accessories can be placed on or secured to surfaces provided for this purpose.The support-system head can be positioned anywhere in the room within the movement range to allow the user to work under ergonomic conditions.The ceiling-mounted support-system is designed to accommodate a certain load. If this load is exceeded, the support-system, and particularly the bearings, may be damaged and also adopt a skew position. However, there is no risk of fracture.In the case of manually height-adjustable ceiling-mountedsupport-systems with balancing system, the ability to operate these deteriorates if the agreed set load is exceeded or not met and may be dangerous both for the user and the equipment.Important Information 概述1.2Explanation of symbols 标识说明危险！注意！小心！提示！有严重的危及生命和损坏仪器的风险.有伤害人体和损坏器械的危险.有损坏器械的风险.信息提示.Risk of serious injuries and damage to property.ATTENTION!Risk of damage to property.Useful additional information and tips.Using the ceiling-mounted support-system吊塔的使用吊塔的使用任何时候移动吊塔，都要确保人员的安全.不允许发生未刹车而引起的碰撞事件.这些操作指导和使用TRUMPF KREUZER 公司吊塔相关.要使用吊塔上的设备，需遵循制造商的指导和规范.吊塔方可使用！移除危险标记！使用前，需做好一切准备.提示！注意！2Using the ceiling-mounted support-system 2.1Commissioning 试运转Before commissioning, the …preparations for commissioning“ described must have been carried out completely.Other regulations relating to health and safety, accidentprevention, hygiene, etc. and also relevant medical and workplaceinstructions must also be followed.damaged!Do not allow unbraked collisions with internalstops to occur!KREUZER ceiling/wall-mountedsupport-systems. To use the equipment on thesupport-system, follow the specific instructions of themanufacturer!危险！be commissioned!Only then may warning notices and signs beremoved!注意！support-system either directly or indirectly mustbe trained!Using the ceiling-mounted support-system 吊塔的使用2.2Horizontal movements 水平移动2.2.1Ergonomically correct operation 正确的操作指导•Hold the equipment rail with both hands. 双手抓住平台的边轨.•Using the thumb to operate any brake button to release thebrakes. 用拇指来操作刹车系统•The support-system head must always be moved in thefollowing directions:吊塔移动必须符合以下情况:- 远离身体，用手臂推动.(A1方向) - 用手臂拉向身体方向.(A2方向) - 侧向转动.(B方向)距离太大时，可向前或向后移动.- away from the body by pushing with the arms (direction A1) - towards the body by pulling with the arms (direction A2)- sideways (direction B) by turning.- 不要推吊塔的箱体边侧！- 注意合理用力，以防肌肉拉伤！With bigger distances, it may be necessary to move forwards and backwards.Wrong! 不当的操作！Do not push the support-system head sideways!More effort is needed and you may pull a muscle!Correct! 正确的操作！Turn the support-system head.旋转吊塔箱体.Using the ceiling-mounted support-system吊塔的使用单臂吊塔吊塔箱体移动范围为一个圆形区域吊塔从位置a 移动到位置 b.仪器平台与臂之间正好有一个合适的角度.旋转手臂到准确的位置，仍保持90°位置.(位置[b ])- 如果距离小，只需推或拉 (位置[c ])- 如果距离大，只需向前或向后轻微的移动手臂.运动范围-图1运动范围-图21 arm support-system Support-system head moves in a circular plane Movement stage 1:Turn support-system head from position [a] to position [b] so that the support-system head is more or less at right-angles to the arm.Movement stage 2:Swivel the arm to the right position, maintaining the 90° position(position [b])•for smaller distances, by pushing or pulling (position [c])•for bigger distances, by moving forwards or backwards with thearms slightly bent (position [d])Using the ceiling-mounted support-system 吊塔的使用2 arm support-systems双臂吊塔Support-system head moves in a circular plane 吊塔箱体的移动范围是Movement stage 1:运动进程 1:旋转至 90°的位置-如下图所示.Bring support-system head to 90° position, as described under "1arm support-systems".Movement stage 2:运动进程 2:围绕中心旋转下臂，直到两臂间大于90°，就可实现完美180°旋转从[e]-[f].Swivel the lower arm around the centre joint until the angle between the lower and upper arm is greater than 90°, ideally 180° ([e]->[f]) to achieve the biggest possible lever arm.Movement stage 3: 运动进程 3:运动进程 3:向前向后旋转上面的臂，以达到所要求合适的位置[g],可直接旋转吊塔箱体以达到所需的位置[hSwivel the upper arm by walking backwards or forwards. After reaching the required position [g], turn the support-system head to the required position [h].Using the ceiling-mounted support-system吊塔的使用气动刹车可使吊塔移动操作变得简便.服务部门可以根据顾客的要求，更换各种型号的气动刹车.气动刹车可帮助避免吊塔箱体发生不受控的活动，可以使它的到指定的位置.在运动的过程中,不能使用刹车.而在释放刹车前不能强行搬动吊塔,否则会导致刹车磨损甚至损坏.释放刹车是通过按压控制面板上相应的按钮.按往下的按钮直至运动终止.以下的标识分别为哪个按钮控制哪个刹车.如果刹车操作失败(听不见气声)，请检查压缩空气装置.当你释放气动刹车时，你会听到气声.这个声音表示气动刹车已释放.顶部刹车:中部刹车:底部刹车:提示！2.3Pneumatic brakes 气动刹车Pneumatic brakes make it easier to move the support-system head.The service department can retrofit ceiling-mounted support-systems with pneumatic brakes if required.Pneumatic brakes help to prevent accidental movements of thesupport-system head and hold the head in the required position.Operation: 操作方法The brake is released by pressing the corresponding button on the control panel. The button must be held down until the end of the movement. The symbols indicate which button operates which brake.Upper joint:Intermediate joint:Lower joint:You will automatically hear the air when you release the brake.This noise signals the release of the brake.注意！releasing the brake, as the brake may wear or even become defective!Using the ceiling-mounted support-system 吊塔的使用2.4Vertical movements 垂直移动Working or parking position. 工作或停止位内操作.把吊塔置于最高位置，使吊塔的箱体不低于2000mm.这样可保证不会碰到头及受伤.绝不能挂在箱体上.比如，拽拉吊塔至工作位置.防撞边角可防止头部被撞破.支持3种垂直模式：- 负载/重量- 垂直移动- 带平衡系统，不带垂直移动刹车. ->无按钮.在上下移动吊塔箱体时，有一些轻微的阻力是正常现象。
英语版仪器操作手册常用的单词
1.contents1.目录，内容，要点2.目次3.内涵2.introduction英音：[,intrə'dʌkʃən]美音：[,ɪntrə'dʌkʃən]。
名词n.1.介绍;正式引见[U][C][P1]He was shaking her hand before I could finish the introduction.未等我介绍完,他就在握她的手了。
2.引进,传入[U][(+of/to/into)]The government saw the introduction of new technology as vital.政府认为引进新技术至关重要。
3.采用;被采用的东西;引种[U][C]Television is a later introduction than radio.电视的使用迟于无线电。
4.引言,序言;序论[C][(+to)]5.入门(书)[C][(+to)]an Introduction to Biochemistry《生物化学入门》6.序曲[C]3.safety measure安全措施safety measures安全措施4.description英音：[di'skripʃən]美音：[dɪ'skrɪpʃən]名词n.1.描写;叙述;形容[U][C]He gave a description of what he had seen.他对看到的情况作了描述。
2.(物品)说明书[C]3.种类;性质[C]In the zoo there are animals of every description.那个动物园里有各种各样的动物。
4.(图形的)描绘[C]5.installation英音：[,instə'leiʃən]美音：[,ɪnstə'leʃən]名词n.1.就任,就职;就职典礼[U][C]the installation of a new mayor新市长的就职2.安装,设置[U]The installation of the shower only took a few minutes.安装淋浴器只花了几分钟时间。
英格索兰面板操作中英文对照
英格索兰面板操作中英文对照更多精彩内容点击此处：/主菜单MAIN MENUOperator SetpointS (操作置点)Options (选项)Sensor Calibration (传感器校正)Alarm History (报警记录)Clock Functions (时钟功能)OPERATOR SETPOINTS (用户设定置点)Lead / Lag (超前/滞后)设定机器先行或滞后运行Offline Pressure (起跳压力)75~额定压力+3 psig在加载/卸载运行模式中的卸载压力Online Pressure (回跳压力)65~offline-10 psig加载压力Lag Offset (滞后补偿值)0 ~ 45 psig先行/滞后运行模式设置滞后补偿值Mode Of Operation (运行模式)?选择压缩机运行模式（三种可选）Max Modulation (最大调节)online+10~offline+7 psig Stop Delay (停机延迟)10 - 30 secStar Delta Time (星三角切换时间) 5 - 20 secMax Modulation (最大调节)online+10~offline+7 psig在调节中的卸载压力Stop Delay (停机延迟) 10 - 30 sec空压机自然停机前卸载运行的最小时间量Star Delta Time (星三角切换时间) 5 - 20 sec起动到星-三角切换时间Display Contrast(对比度) 0 - 10改善Intellisys控制器显示效果OPTIONS (选项)Auto Restart (自动再起动)On/Off 接通或断开自动再起动选项Auto Restart Time (自动再起动时间) 2 - 60 mins 在此模式里停机前卸载运行时间Auto Restart Delay Time (自动再起动延时时间）0-60SEC 在此模式中再次起动前延时时间Sequence (顺序起动) On/Off 用于接通或断开次序控制器Remote Start Stop (遥控起动/停机) On/Off 用于接通或断开遥控起动/停机选项Power Out Restart (断电自动起动功能) On/Off (Key req) 如装有此选项块，接通或断开选项Power Out Restart Time (断电自动起动时间) 10 - 600 sec恢复电源到再起动时间Low Ambient (低环境温度）ON/OFF接通或断开低环境温度选项（必需安装3CTT）Min. Cooler Out Temp (冷却器出口最低温度）30-150 F 当装有此选项，加载前冷却油必需升到的温度Separtator Delta-P Solenoid (分离器压差电磁阀）ON/OFF接通或断开选项。
设备模型 一些命令的中英文对照
一．File1.File 文件1）File Design 保存设计文件2）Ref. Model用于参考模型的操作3）Project Files用于浏览当前项目参考的数据库文件4）UndoMark撤消至标记点5）Mark 设置标记点6）Undo All 撤消所有步骤2.Generate Envelope File 生成封包文件，主要用于碰撞检查press Design 压缩文件4.Return to Piping返回管道模型5.Exit退出二．Element 元素1.Analyze 查看元素在MS中的属性三．Settings1.Set form View 设置格式视图2.Set Refresh Views 设置更新视图3.Set Active Point 在视图中激活Tee4.Active Category 激活种类1）Active Dumb Category2）Active Semi-Intelligent Category3）Active Primitive Category 激活初始设置的类别，在相应的类别中绘图，类似于CAD中的层操作。
5.Active Coordinate System 激活坐标系6.Color 颜色7.Fonts 字体8.Rendering 渲染四．Equipment 设备1.Equipment Manipulation设备操作1）Start创建设备模型2）Copy复制设备3）Move移动设备4）Delete删除设备5）Rotate旋转设备6）Mirror and Copy镜像复制设备7）Mirror镜像设备8）Accept确认/接受ponent Manipulation 设备部件操作1）Add向设备上添加部件2）Modify修改设备部件属性3）Modify and Copy修改并复制设备部件4）Copy复制设备部件5）Move移动设备部件6）Delete删除设备部件7）Rotate旋转设备部件8）Mirror and Copy镜像复制设备部件9）Mirror镜像设备部件10）Nozzle Manip参数化管嘴操作11）Datum Point Manip设备数据点操作12）Accept确认/接受3.Precision Point 精确定位点1）Abs PDS XYZ绝对坐标值2）Delta PDS XYZ相对坐标值3）Construct Point 构造点4）Move Along Prim沿主轴移动5）Move Along Secod沿次轴移动6）Mid-Point 取中点7）Dist and Direct 距离和方向8）Restore Last 恢复到前一次的操作9）PP snap lock PP点捕捉锁定4.Refresh Manipulation方向标操作1）N,S,E,W,U,D设置轴往各个方向2）Swap交换主次轴3）Change Axis激活主次轴4）Invert 使轴朝相反方向5）Deflect 以一定角度偏转轴6）Restore Last 恢复到前一次的状态7）Orient Primary By 2 Points 通过两点定义主轴方向5.Revise Attribute修改设备属性6.Check Dimensions尺寸检查7.Approve/Unapprove 修改设备批准状态8.Attach Graphics 将MS中的图形附于某个设备9.Integrated Commands 综合命令1）Review Attributes 查看属性2）Clash Review 查看碰撞3）Window to Named Item在视图中显示某个名称的元素4）Area V olume Graphics 区域空间图形10.D isplay Errors 显示错误信息五．View 视图1.View 视图操作1）Window V olume 定义显示的视图空间大小2）Window Center 定义视图中心3）Window Area显示框选的视图范围4）Window Origin 定义视图原点5）Zoom In放大6）Zoom Out缩小7）Fit使元素充满整个视图8）Review Catagories 设置视图中的显示种类9）View Equipment显示某个设备10）Saved Model View 保存视图11）View Previous 显示前一次的视图12）View Next 显示后一次的视图2.View More3.View Direction 视图方向4.View Depth视图深度5.Open/Close 打开/关闭视图视图6.Bottom to Top最内层视图置于最外层7.Cascade 视图层叠8.Tile 视图并排9.Swap 交换10.U pdate 更新视图11.C opy 复制视图12.C amera 照相机13.R ender 渲染14.L evels 层15.R otation 旋转16.M ogle六．User 用户er Preferences 用户自定义七．Cmds1.Remove Patettes 清除命令面板2.Help 帮助八．Application 用于绘图环境的切换1.Equipment Modeling2.Microstation设备建模中两个比较重要的属性表：1．设备属性表1）equip_no设备位号2）equip_descr_1设备描述13）equip_descr_2设备描述24）tutorial_no索引号5）equip_class设备类别6）dry_weight设备净重，单位：吨7）oper_weight_1操作重量1，单位：吨8）oper_weight_2操作重量2，单位：吨9）insulation_thk保温/保冷厚度，单位：mm 10）construction_stat设备施工状态11）equipment_division设备分组12）approval_status设备批准状态2．管口属性表1） A管口长度，单位：mm 2）Tag管口位号3）Rating管口压力等级，单位：psi 4）End Prep管口连接形式5）Service管口作用6）Pipe Mat Class管道材料等级7）Table Suffix8）Schedule/Thick。
中英文对照的装载仪操作手册
"博大5" 装载仪操作手册"BODA5"USER M ENU上海亮格船舶工程技术有限公司SHANGHAI LIANGGE SHIPS E NGINE E RING TE CHNIQUE CO.,LTD.2012/11/18目录1I n t r odu ct ion(简介) (4)2Test Con dit ion(测试工况说明) (4)3I n st allat ion(安装) (5)4St ar t in g Pr ogr am(启动) (6)5F ile(文件) (9)5.1N ew(新建工况) (9)5.2Sa ve(保存工况) (9)5.3Sa ve a s(工况另存为) (10)5.4Open(打开工况) (10)5.5Open St a n da r d(打开标准工况) (11)5.6Pr in t(打印) (11)5.7Pr in t pr eview(打印预览) (11)5.8Pr in t set(打印设置) (11)5.9Pa sswor d(密码) (11)5.10C h a n ge pa sswor d(密码更改) (12)5.11Exit(退出) (12)6Ar r an gemen t(分类) (12)6.1Voya ge in for ma t ion(航次信息) (12)6.2C on st a n t(船员和常数) (13)6.3C a r goes loa d(货舱货) (13)6.4Ta n k s loa d(压载水等液舱) (14)6.5B a les(大件货) (15)7Con t ain er(集装箱) (16)7.1B a yPla n (16)7.2C u r r en t ba y(当前B a y) (20)7.3All ba y(所有B a y) (21)7.4Set t in g Loa din g Por t(设置挂港代码) (21)7.5Set defa u lt box(设置默认箱) (22)7.6Empt y box weigh t(空箱设置) (22)7.7Rea d ED I file(读Edi文件) (22)8E valu at ion(计算) (25)8.1Su mma r y(总表) (25)8.2St a bilit y(稳性计算) (25)8.3St r en gt h(强度计算) (26)8.4D r a ft Su r vey(六面水尺测量) (27)8.5H ydr o da t a(静水力数据) (28)9Repor t(报告) (28)9.1Repor t(报告) (28)9.2B a yPla n(B a ypla n总图） (29)9.3B a yPla n of a ba y(B a ypla n单图) (30)9.4B a y list(按B a y重量列表) (30)10Opt ion s(选项) (31)10.1Ala r m(声响报警) (31)10.2Specific Gr a vit y(比重设置) (31)10.3Fr om AP(距艉) (31)11H elp(帮助) (31)11.1H elp(帮助) (31)11.2Abou t(关于) (32)11.3Regist er(注册) (32)12E xample(例子) (32)12.1N ew(新建) (32)12.2Voya ge in for ma t ion( 航次信息) (34)12.3C r ew & C on st a n t(船员和常数) (35)12.4C a r goes H old(货舱装载) (35)12.5Ta n k s Loa din g(液舱装载) (35)12.6C on t a in er(集装箱装载) (36)12.7C h eck Resu lt(检查结果) (39)13Appen dix(附录) (41)13.1St owa ge fa ct or(积载因数换算表) (41)13.2con figu r a t ion(配置) (41)13.3Soft wa r e mist a k e(错误应对) (41)13.4Wa r n in g(警告) (42)13.5OPERATION AL RESTRIC TED D ATA(操作限制资料) (42)1Introduction(简介)1．About software(软件概况)FUHAI Loading Program is a software system for ship loading calculation on-board in real time. It has friendly user interface. Using this system, user can load container quickly or input tanks data easily. The stability can be calculated and the distribution of shear force and bending moment of the ship under the loading condition can be obtained.福海船舶装载仪是一个船舶运行的装载计算软件，具有友好的操作界面，能快捷地输入集装箱数据和液舱重量数据，并能迅速地计算出船舶浮态和稳性，以及船舶的剪力弯矩分布状况。
数控机床设备资料中英文对照
数控机床设备资料中英文对照一：说明书名词解释：[机]润滑孔 ; [机]滑油孔 ; 加油孔 ; [机]注润滑油孔[机]压力润滑 ; 强制润滑 ; [机]加压润滑润滑装置 ; 润滑油 ; 润滑装配AUTO LUBE 自动润滑Spindle motor 主轴马达Hydraulic pump motor 油压马达Auto Cross feed motor 前后马达刀具高压冷却系统一次流过冷却系统油水分离机sp. through coolant主轴通过冷却液through coolant通过冷却剂冷却剂喷嘴flood coolant motor洪水冷却电机base coolant/gun motor基地冷却剂/枪电动机mist collect motor雾收集电动机Coolant motor (for tools/chips) 切削水马达Chip conveyor motor 铁屑输送机马达ATC motor 储刀仓马达fan cooler风扇冷却器冷风机fan cooler(for amp):风扇冷却器（对放大器（amplifier））安全壳风机冷却器风扇冷却器fan unit 风扇设备风扇单元风扇装置panel cooling 嵌入式降温panel door 镶板门panel heating 板壁供热tool counter工具柜台MAGAZINE CW 刀库正转MAGAZINE CCW 刀库反转 ...COUNTER （计数器）TOTAL COUNTER（总计数器）Mate：配对物（伴侣）Rotation：旋转回转Caution：谨慎radiator brake：散热器制动吹尘器喷枪喷气管Air Blow：鼓风Overload：超载防止过载，超载防护信息过载；信息超载；信息超负荷过载容量超负荷运行，超载运行热继电器；热过载继电器[电]过载电流 ; 过载电流过负荷电流dis connect jumper pin in case of using sub op存保计划连接跳线针如果使用子运算（in case of using如果使用；usb op 子运算）disconnect jumper pin断开连接跳线针beta-i servo ：β-i 伺服spindle amplifer:主轴放大器manual feed delay：手动进给延迟rigid tapping ontime：刚性攻丝准时z-axis cancel：z轴取消现行刀具号恢复当前工具预设servo amp module伺服放大器模块optical fiber cable：光缆、光纤光缆板键头型图要点键盘纸 ; 转印盘纸i series servo motor：i系列伺服电动机call light：警示灯lub. motor on :润滑泵接通（lubricant润滑剂马达接通信号ATC forward：ATC 向前ATC reverse ：ATC反向Ball screw: 滚珠丝杠Binary code :二进制DETACH:分离，脱开Follow-up ：位置跟踪Black format：程序段格式Tool post interference check：刀架碰撞检查Abnormal load detection：异常负载检测Manual handle interruption:手轮中断Ladder diagram:梯形图（阶梯，关系图）Tool counter：工具柜台Magazine：刀库Brake module：制动模块Machine side：机侧Twist pair：双绞线Main power source：主电源Wiring diagram：接线图Current：现时状态、现行状态Dual table ：双工作台Spare：备用件、预置Aux：辅助Brake on：制动器Mist ：雾状、雾Coolant tank capacity：冷却泵油箱容量Enclosure：外壳、套、附件Overload：过载Flag：标志Condition：条件Machine ready delay：机床准备延迟Encoder：编码器Etherent：以太网口Orientation：主轴定向Spindle positioning：主轴定位Fault：故障Motion：运转Dwell：停歇，保压Feed rate：进给率Interlock/start-lock:互锁/启动-锁Spindle speed arrival check：主轴速度到达检测concent for maintenance答应为维护AC reactor:交流电抗器APC：绝对位置编码器反馈?(Absolute position encoder feedback) arm in position z-axis interlock:手臂位置Z轴互锁Pressure：压力，压强，是……压迫[机]压力阀 ; [机]压力值 ; 止回阀 ; [机]回压阀气压 ; 空气压力 ; [建]工作气压 ; [物]气源压力consuming volume耗用量Oil：油Oller：n. 轮胎式压路机Capacity: n. 能力；容量；资格，地位；生产力[力]承载能力 ; [力]承载力 ; [力]承重能力 ; 支持力oil type 油的类型pumping n. [机] 抽吸；脉动；抽气效应v. 抽水（pump的ing形式）抽空 ; 扬水 ; 排出 ; 泵出[电子]泵频 ; 抽运频率 ; 泵送频率interval：间隔间距[统计]组距 ; 组区间 ; 级距 ; 标度分组间隔[天]时间间隔 ; [天]时间区间 ; 时距 ; [天]时段[统计]区间尺度 ; 等距量表 ; [计]等距尺度 ; 等距量尺capacity：容量consuming：adj. 消费的；强烈的v. 消耗（consume的ing形式分配器metering n. 计量，[测] 测量；测光模式v. 以计量器计量（meter的ing形式[机]计量阀 ; 限流阀 ; [机]限量阀 ; [机]配量阀量孔 ; [油气]测油孔 ; 计量喷流OPTION：选择（选择功能块）ARM:机械手ARM home position：机械手原点位置soft key cable：软键电缆PUNCH PANEL:开孔面板MOTHER BOARD:母版Name：名称Description：描述Connector：连接器Clamp：夹紧Unclamp：松开Lamp：灯noise filter：噪声滤波器二、操作面板中英文对照：ABS和REL——在法那克系统中，按这两个键分别来切换当前机床的相对坐标和绝对坐标ALL——全选，程序编辑时用PRGRM——程序（program）的缩写，用于查看程序NEXT——查看程序和查看参数时，下一页OPRT——在法那克系统中，选择编辑程序时，也就是按下PRGRM后，再按这个键，才能输入程序号HOST，CONECT——这两个是在系统与外界通信时用的，我没试过，不知道什么作用HELP——查看帮助信息SHIFT——换档键，有些键有两个字符，按下这个键，用来输入顶部那个字符ALTER——程序修改键，编辑程序时用INSERT——程序插入键，编辑程序时用EOB——程序结束符，在编辑程序时，没段程序结束时，要加这个符号CAN——取消键，用来取消输入INPUT——输入键，用来输入程序或参数POS——按此键显示当前机床位置画面PROS——按此键显示当前程序画面OFFSET——按此键显示刀具偏置画面SETTING——按此键显示刀具偏置设定画面SYSTEM——按此键显示系统信息及系统状态画面GRAPH——按此键显示加工时刀具轨迹的图形画面CUSTOM——按此键显示用户宏程序画面手动数据输入 (MDI)直接数字控制方法 (DNC)控制器单元或机控制器单元（MCU）法拉克：ALTER 修改程序及代码INSRT 插入程序DELET 删除程序EOB 完成一句 (END OF BLOCK)CAN 取消(EDIT 或 MDI MODE 情况下使用) INPUT 输入程序及代码OUTPUT START 输出程序及指令OFFSET 储存刀具长度、半径补当值AUX GRAPH 显示图形PRGRM 显示程序内容ALARM 显示发生警报内容或代码POS 显示坐标DGONS PARAM 显示自我诊断及参数功能RESET 返回停止CURSOR 光标上下移动PAGE 上下翻页三、机床报警信息中英文对照：T WORD ERROR （T 码错误）LOW OIL LEVEL （油位低）SPINPLE FAULT （主轴故障）SPINDLE ALARM （主轴报警）EXTERNAL EMG STOP （急停按钮被按下）AC NOT READY （交流盘未准备好）SPINPLE LUBE FAULT （主轴润滑故障）T CODE ERROR （T代码出错，非法T代码）M CODE ERROR （M代码出错，非法M代码）SERVO NOT READY （伺服未准备好）NC NOT READY（NC没准备好）TURRET FAULT （转塔故障）TURRET LIMIT （转塔限位）DC 24V OPEN （直流24断开）+24V NOT READY（+24V没准备好）GRAR DRIFT （档位漂移）PLEASE AXIS RETURN HOME（轴未回零）PLEASE DRUM RETURN HOME（刀库未回零）AIRPRESSFAILURE（气压故障）UNCL TOOL FALL（松刀失败）AIR PRESSURE DROP （压缩空气压力过低）CLAMP TOOL FALL（夹刀失败）DRUM NOT PARKED（刀库未在原值）X ZERO POINT NOT REACHED （X 轴未回零）Y ZERO POINT NOT REACHED （Y 轴未回零）Z ZERO POINT NOT REACHED （Z 轴未回零）4TH ZERO POINT NOT REACHED （第4轴未回零）X AXIS OVERTRAVL（X轴超限）Y AXIS OVERTRAVL （Y轴超限）Z AXIS OVERTRAVL （Z轴超限）COUNTER SWITCH REEOR （计数开关故障）MASTERT RANSFER OVER TEMP （主变压器过热）Z AXIS NOT AT FIRST REF POSITION （Z轴未在第一参考点）SPINDLE ORIENTATION FALLURE （主轴定向失败）TOOL DESENT OR TOOL DATA REEOR （刀具数据错误）PLEASE UNLOAD THE TOOL ON SPRINELK （请卸下主轴上的刀）PLEASE LOAD TOOL ON APINDLE （请装上主轴上的刀）A AXIS UNCLAMP FAIL （A 轴松开失败）A AXIS CLAMP FAIL （A 轴夹紧失败）DRUM OUT TO APRONDLEIS FALL （刀库摆向换刀位失败）MG SWING OVERLOAD（刀库摆动过载）DRUM BACK PARK IS FALL （刀库摆回原始位失败）TURRENT MOTOR1 OVERLOAD （刀库移动电机过载）COOLANT MOTOR OVERLOAD （冷却泵过载）DRUM ATC FAULT （自动换刀失败）TOOLS UNLOCKED （刀具未锁紧）BATTERY ALARM （电池报警）DRUM POSITION SWITCH ERROR （刀库位置检测开关故障）DRUM NOW NOT AT PARK （刀库未在原始位置）IT DANGOU TO MOVE DRUM （刀库禁动）POT UO FAILOR POT NOT AT UP POSITION （刀套未在水平位）POT DOWN FAIL （刀套翻下动作失败）IT IS DANGOUR TO MOVE ARM （机械手禁动）THE SPINDLE STATU IS ERROR （主轴状态错误）ARM MOTOR OR ARM SWITCH FALL （机械手或机械手开关故障）CENTRE LUBRICATION FALL （中心润滑故障）THE WORK NOT CLAMPED （工件未夹紧）AUTO TOOL CHANGE FAULT （自动换刀失败）TOOL DATA OUT OF RANGE （指令刀具号超出范围）THE ORDER TOOL NOW IN SPINDLE （目标刀具在主轴上）THE THREE SPINDLE SWITCH FAULT （主轴上的接近开关）THE CENTRE COOLANT IS LOWER （刀具内冷泵液位过低）DRUM RETURN 1# POSITION FAULT （刀库自动回零失败）SPINDLE OVERLOAD （主轴过载）TURRENT MOTOR OVERLOAD （刀盘转动电机过载）CHIP CONVEYER OVERLOAD （拉屑器过载）HARD LIMIT OR SERVO ALARM （硬限位或伺服报警）NO LUB OIL （无润滑油）INDEX HEAD UNLOCKED （分度头未锁紧）MT NOT READY（机床没准备好）MG OVERLOAD （刀库过载）LUB EMPTY（润滑无油）AIR PRESSURE（气压不足）COOLANT NOT READY（冷却没准备好）LUBE EMPTY（油雾油位低，润滑油位低）LUB PRESSURE LOW（润滑压力低）CONVEY VERLOAD（排屑过载）LUB OVERLOAD（润滑过载）LUBE PRESSURE LOW（油雾压力低）SERIAL SPINDLE ALARM (串行主轴报警)NC BATTERY LOW ALARM(NC电池低报警)MAGAZINE MOVE LIMIT SWITCH ERRORSPINDLE TOOL UNLAMP POSITION LIMIT SWITCH ERROR MAGAZINE NOT IN POSITION OR SENSOR ERRORAIR PRESSURE LOW ALARM(气压低报警)MOTOR OVERLOAD(电机过载)T CODE > MAGAZINE TOOLST CODE < 1 ERROR5TH AXIS HARDWARE OVERTRAVER LIMIT ERRORDOOR IS OPENED(开门)LUB PRESSURE SWITCH ERROR(油压开关错误) SPINDLE OIL COOLANT UNIT ERRORSPINDLE LOAD ABNORMAL（主轴负荷异常）TRANSDUCER ALARM（传感器报警）BED-HEAD LUBRICATE OFF（床头润滑关闭）EMG OFFHYDRAULIC CHUCK PRESS LOW（液压夹头压力低）HYDRAULIC TAIL PRESS LOW（液压尾座压力低）LUB 0IL LOW（油压低）TURRET CODE ERROR（转塔码错误）TURRET RUN OVERTIME（转塔运行超时）MANUAL HANDLE INTERRUPTTRY TO RUN SPINDLE WHILE CHUCK NOT LOCKTRY TO RUN SPINDLE WHILE TAIL NOT LOCK SPINDLE NEUTRAL GEARMAGAZINE ADJUSTHYDRAULIC NOT RUNSAFETY DOOR BE OPENEDSAFETY DOOR NOT CLOSENOT ALL AXIS HAVE GONE BACK REFIN ADJUST,IGNORE GOING BACK REFAFTER EXCHANGE TOOL,CYCLE STARTATC MOTOR QF16 OFFX AXIS IS LOCKED（X 轴被锁定）Y AXIS IS LOCKED（Y 轴被锁定）Z AXIS IS LOCKED（Z 轴被锁定）A AXIS IS LOCKED（A 轴被锁定）SPINDLE MOTOR FAN QF26 OFF(主轴电机风扇QF26关闭) SPINDLE ORIENTATION INCOMPLETE（主轴定位不完全）M FUNCTION NOT COMPLETE（M 功能无法完成）SPINDLE NOT IN GEAR POSITION（齿轮不在主轴位置）SPINDLE NOT CHANGED TO LOW GEAR（主轴没有变为低档）SPINDLE NOT CHANGED TO HIGH GRAR（主轴没有变为高档）MAG NOT BACKWARDSPINDLE TOOL NOT CLAMPSPINDLE TOOL NOT UNCLAMPMAG NOT IN POSITIONMAG DOES NOT ROTATEMAG DOES NOT STOP RUNNINGA AXIS HAVE NOT CLAMPEDA AXIS HAVE NOT UNCLAMPEDSET D499=1,"" SWITCH ONHYDRAULIC MOTOR QF7 OFF（液压马达QF7关闭）HYDRAULIC TEMPRETURE HIGH（液压使用温度高）HYDRAULIC FILTER BLOCKED（液压过滤器阻止）HYDRAULIC OIL LEVEL LOW（液压油位低）HYDRAULIC FAN QF8 OFF（液压风扇QF8关闭）HELIX CONYER QF9 OR QF10 OFFCHAIN CONYER QF11 OFFCOOLANT MOTOR QF12 OFF（冷却液电机QF12关闭）COOLNT LEVEL LOW,CYCLE STOP AFTER 20 MINUTESINNER COOLANT BLOCK（内冷却堵塞）SPINDLE COOLANT MOTOR QF14 OFF（主轴冷却液电机QF14关闭）INNER COOLANT QF13 OFF（内冷却液QF13关闭）MAG MOTOR QF15 OFFCABINET COOLANT EQUIP QF20 OFFOIL GATHER QF24 OFFAIR PRESSURE LOW（低气压）SPINDLE COOLANT MOTOR FAULT（主轴冷却液电机故障）IS LOW（润滑油低）DOOR OPEN（门打开）FRONT DOOR(R) OPEN（前门打开）LEFT DOOR OPEN（左门打开）LUBRICATION OIL QF23 OFF（润滑油QF23关闭）LUBRICATION PRESS LOW（润滑油位低）IN ADJUST,MAG CAN'T EXCHANGE T（在调整，刀库不能交换T）NOT ALL DOOR CLOSED（门没有全部关闭）IN M06,MAG NOT READY（在M06，刀库未准备好）MAGAZINE NOT READY（刀库未准备好）POCKET NOT HORIZANTALIN M06,Z NOT BACK TO 2ND REFIN M06,Z AXIS NOT IN PSW1ATC NOT IN ZERO POSITIONSPINDLE ORIENTATION UNCOMPLETEPOCKET NOT HOR./MAG NOT BCKWRDPOCKET NOT VER./MAG NOT FORWRDUNCLAMP TOOL HAS NOT COMPLETEDCLAMP TOOL HAS NOT COMPLETEDAIM TOOL NO. IS WRONGMAG NOT BACKWARDAFTER RETRACT,SET OFFZ NOT IN PSW2,FORBID ATC RUNNINGD499 EQUAL 1SOFT SWITCH IS ONZ NOT IN PSW2,FORBID MAG FORWARDCHEKE SPINDLE MODULE ALARMOIL WATER SEPARATOR QF24 OFFSET THE SOFT SWITCH OFFSET D499 TO 0 设定D499为0K PARAM ABOUT MAG SET IS WRONG 关于MAG的K参数设定错误MECHANICAL BRAKE NOT RELEASED机床抱闸没有松开MECHANICAL BRAKE IS WRONG 机床抱闸错误PLEASE ADD 请加润滑油PROBE BATTERY VOLTAGE IS LOW 探头电池电压低PROBE IS ERR 探头错误PARAMETER WRITE ENABLE（参数写使能）PMC EDIT ENABLE（PMC编辑使能）CHECK LUB ROUTINSPINDLE GEAR SIGNAL MISS 主轴档位信号消失T_CLAMPED_SIGNAL MISS T夹紧信号消失SP OVERRIDE SWITCH DISCONNECTION 主轴倍率开关断路FEED OVERRIDE SWITCH DISCONNECTION 进给倍率开关断路THE TOTAL NUMBER OF POCKETS SET ERRCHANGE T STOPED BECAUSE NO AIR 因为缺少压空交换停止THE COOLANT WATER TOO LOW,ADD COOLANT WATER AT ONCE 冷却水少立即加水COOLANT LEVEL LOW,ADD COOLANT WATER 冷却水液位低PLEASE REPLACE CNC BATTERY QUICKLY 请立即更换CNC电池四、SIEMENS常用缩略语：SIEMENS常用缩略语A Output 输出ASCII American Standard Code for Information Interchange 美国信息交换标准代码AV Preparation for work 运行准备BA Operating mode 运行方式BAG Operating mode groups 运行方式组BB Ready for operation 准备好运行BCD Binary Coded Decimals 二-十进制BHG Hand-held terminal 手提终端BOF User interface 用户接口CNC Computerized Numerical Control 计算机化数字控制CP Communication Processor 通迅处理器CPU Central Processing Unit 计算机中央处理装置CR Carriage Return 托架折回CSB Central Service Board(PLC module) 中央维护板，PLC 模块CTS Clear To Send 发送使能DAU Digital-Analog Converter 数模转换器DB Data Block 数据块DIN German Industrial Standards 德国工业标准DIO Data Input/Output 数据输入/输出DRF Differential Resolver Function 差分功能DRY Dry Run 空运行DSB Decoding Single Block 译码单段DSR Data Send Ready 备用输入DW Data Word 数据字E Input 输入EIA-Code Special tape code,number of holes per characters always odd 特殊纸带码，每个字符的孔数为奇数EPROM Programm memory with fixed program 有固定程序的程序存储器E/R Controlled Supply and Energy Recovery Module 可控电源和能量恢复模块ETC ETC key:Extension of the softkey bar in the same menuETC 键：同级菜单扩展键FDB Product designation database 产品指定数据库FIFO First in First Out 先进先出FRA Frame module 帧频模块FRAME Coordinate conversion with the components zerooffset，rotation，scaling，mirror-imaging 坐标换算，具有零点偏置，坐标旋转，标度功能和镜向功能FRK Cutter radius compensation 铣刀半径补偿FST Feed Stop 停止进给GUD Global User Data 全体用户数据HMS High-Resolution Measuring System 高分辨率测量系统HSA Main Spindle Drive 主轴驱动HW Hardware 硬件IM Interface Module 接口模块IM-S/R Interface Module(S=send/R=receive) 接口模块，S=发送/R=接收INC Increment 步进增量ISO-Code Special tape code,number of holes per character always even特殊纸带码，每个字符的孔数为偶数K1...k4 Channel 1 to Channel 4 通道1 到通道4KOP Ladder Diagram 梯形图KV Loop-Gain Factor 增益系数KUE Transformation Ratio 传动比LCD Liquid Crystal Display 液晶显示LED Light Emitting Diode 发光二极管显示LUD Local User Data 局部用户数据MB Megabyte 兆字节MD Machine Data 机床数据MK Measuring Circuit 测量回路MDA Manual Data Automatic 手动输入，自动执行MLFB Machine-readable product designation 机器可识别的产品代号MMC Man Machine Communication:User interface of the numerical control system for operation,programming and simulation 人机通讯：系统操作界面，用操作，编程和模拟MPF Main Program File：NC part program(main program)NC 零件程序，主程序MPI Multi Point Interface 多点通讯接口MSTT Machine control panel 机床控制面板NC Numerical Control 数字控制NCK Numerical Control Kernel(numerical krnel with block preparation, traversing range etc.) 数字控制核心：具有程序段预处理,运行范围等等NCU Numerical Control Unit 数控单元NURBS Non Uniform Rational B Spline 非均值有理B样条NV Zero Offset 零点偏置OEM Original Equipment Manufacturer 原设备制造商OP Operator Panel 操作面板OPI Operator Panel Interface 操作面板接口PC Personal Comprter 个人计算机PCMCIA Personal Computer Menory Card International Association 接口协议PG Programming Device 编程器PLC Programmable Logic Control 可编程逻辑控制器PRT Program Test 程序测试RAM Random Access Memory 随机存取存储器RISC Reduced Instruction Set Computer 处理器，具有指令组小、通过能力强ROV Rapid Override 快速修调RPA R Parameters Active(NCK memoty area for R parameter numbers)R 参数有效，NCK 中用于R 参数号的存储器区RTS Request To Send(control signal from serial data interfaces)发送请求：来自串行接口的控制信号SBL Single Block 单段SBL2 Single Block Decoding 译码单段SEA Setting Data Active(memory area for setting data in NCK)设定数据有效：用于NCK 中设定数据的存储区SD Setting Data 设定数据SKP Skip Block 程序段跳跃SM Signal Module 信号模块SPF Sub Program File 子程序文件SPS Programmable Logic Controller 可编程逻辑控制器SRK Cutter Radius Compensation 刀尖半径补偿SSFK Leadscrew Error Compensation 丝杠螺距误差补偿SSI Serial Synchronous Interface 串行同步接口SW Software 软件TEA Testing Data Active(with reference to the machine data) 测试数据有效：与机床数据有关TO Tool Offset 刀具补偿TOA Tool Offset Active(memory area for tool offset) 刀具补偿有效，用于刀补的存储区TRANSMIT Transform Milling into Turning(coordinate conversion onturning machines for milling)铣床转换为车床：车床坐标换算用于铣削加工VSA Feed drive(spindle) 主轴进给驱动V Bit type PLC variable PLC变量类型：位VB Byte type PLC variablePLC变量类型：字节WKZ Tool 刀具WZ Tool 刀具WZK Tool offset 刀具补偿ZOA Zero Offset Active(memory area for zero offsets)零点偏置有效：零点偏置存储区五、常用缩写：启动 start STRT停止 stop ST运行 run正转 forward FWD反转 reverse REV加速 accelerate减速 reduce RED低速 low L中速 medium M高速 high H主轴方向 spindle direction 向前 forward FWD向后 backward向左 left L向右 right R诊断：DGNOS信息：MSG操作员：OPER参数：PARAM目录：DIR取代：ALTER公共地线，公共线：COM六、知识补充：金属切削 metal cutting机床 machine tool金属工艺学 technology of metals 刀具 cutter摩擦 friction联结 link传动 drive/transmission轴 shaft弹性 elasticity频率特性 frequency characteristic 误差 error响应 response定位 allocation机床夹具 jig动力学 dynamic运动学 kinematic静力学 static分析力学 analyse mechanics拉伸 pulling压缩 hitting剪切 shear扭转 twist弯曲应力 bending stress强度 intensity三相交流电 three-phase AC磁路 magnetic circles变压器 transformer异步电动机 asynchronous motor几何形状 geometrical精度 precision正弦形的 sinusoid交流电路 AC circuit机械加工余量 machining allowance 变形力 deforming force变形 deformation应力 stress硬度 rigidity热处理 heat treatment退火 anneal正火 normalizing脱碳 decarburization渗碳 carburization电路 circuit半导体元件 semiconductor element 反馈 feedback发生器 generator直流电源 DC electrical source门电路 gate circuit逻辑代数 logic algebra外圆磨削 external grinding内圆磨削 internal grinding平面磨削 plane grinding变速箱 gearbox离合器 clutch绞孔 fraising绞刀 reamer螺纹加工 thread processing螺钉 screw铣削 mill铣刀 milling cutter功率 power工件 workpiece齿轮加工 gear mechininggear主运动 main movement主运动方向 direction of main movement进给方向 direction of feed进给运动 feed movement合成进给运动 resultant movement of feed合成切削运动 resultant movement of cutting合成切削运动方向 direction of resultant movement of cutting切削深度 cutting depth前刀面 rake face刀尖 nose of tool前角 rake angle后角 clearance angle龙门刨削 planing主轴 spindle主轴箱 headstock卡盘 chuck加工中心 machining center 车刀 lathe tool车床 lathe钻削镗削 bore车削 turning磨床 grinder基准 benchmark钳工 locksmith锻 forge压模 stamping焊 weld拉床 broaching machine拉孔 broaching装配 assemblingfound流体动力学 fluid dynamics流体力学 fluid mechanics加工 machining液压 hydraulic pressure切线 tangent机电一体化 mechanotronics mechanical-electrical integration 气压 air pressure pneumatic pressure稳定性 stability介质 medium液压驱动泵 fluid clutch液压泵 hydraulic pump阀门 valve失效 invalidation强度 intensity载荷 load应力 stress安全系数 safty factor可靠性 reliability螺纹 thread螺旋 helix键 spline销 pin滚动 rolling bearing滑动轴承 sliding bearing弹簧 spring制动器 arrester brake十字结联轴节 crosshead联轴器 coupling链 chain皮带 strap精加工 finish machining粗加工 rough machining变速箱体 gearbox casing腐蚀 rust氧化 oxidation磨损 wear耐用度 durability随机信号 random signal离散信号 discrete signal超声传感器 ultrasonic sensor 集成电路 integrate circuit 挡板 orifice plate残余应力 residual stress套筒 sleeve扭力 torsion冷加工 cold machining电动机 electromotor汽缸 cylinder过盈配合 interference fit热加工 hotwork摄像头 CCD camera倒角 rounding chamfer优化设计 optimal design工业造型设计 industrial moulding design有限元 finite element滚齿 hobbing插齿 gear shaping伺服电机 actuating motor铣床 milling machine钻床 drill machine镗床 boring machine步进电机 stepper motor丝杠 screw rod导轨 lead rail组件 subassembly可编程序逻辑控制器 Programmable Logic Controller PLC 电火花加工 electric spark machining电火花线切割加工 electrical discharge wire - cutting 相图 phase diagram热处理 heat treatment固态相变 solid state phase changes有色金属 nonferrous metal陶瓷 ceramics合成纤维 synthetic fibre电化学腐蚀 electrochemical corrosion 车架 automotive chassis悬架 suspension转向器 redirector变速器 speed changer板料冲压 sheet metal parts孔加工 spot facing machining车间 workshop工程技术人员 engineer气动夹紧 pneuma lock数学模型 mathematical model画法几何 descriptive geometry机械制图 Mechanical drawing投影 projection视图 view剖视图 profile chart标准件 standard component零件图 part drawing装配图 assembly drawing尺寸标注 size marking技术要求 technical requirements刚度 rigidity内力 internal force位移 displacement截面 section疲劳极限 fatigue limit断裂 fracture塑性变形 plastic distortion脆性材料 brittleness material刚度准则 rigidity criterion垫圈 washer垫片 spacer直齿圆柱齿轮 straight toothed spur gear 斜齿圆柱齿轮 helical-spur gear直齿锥齿轮 straight bevel gear运动简图 kinematic sketch齿轮齿条 pinion and rack蜗杆蜗轮 worm and worm gear虚约束 passive constraint曲柄 crank摇杆 racker凸轮 cams共轭曲线 conjugate curve范成法 generation method定义域 definitional domain值域 range导数\\微分 differential coefficient求导 derivation定积分 definite integral不定积分 indefinite integral曲率 curvature偏微分 partial differential毛坯 rough游标卡尺 slide caliper千分尺 micrometer calipers攻丝 tap二阶行列式 second order determinant逆矩阵 inverse matrix线性方程组 linear equations概率 probability随机变量 random variable排列组合 permutation and combination气体状态方程 equation of state of gas动能 kinetic energy势能 potential energy机械能守恒 conservation of mechanical energy 动量 momentum桁架 truss轴线 axes余子式 cofactor逻辑电路 logic circuit触发器 flip-flop脉冲波形 pulse shape数模 digital analogy液压传动机构 fluid drive mechanism 机械零件 mechanical parts淬火冷却 quench淬火 hardening回火 tempering调质 hardening and tempering磨粒 abrasive grain结合剂 bonding agent砂轮 grinding wheel。
设备操作指导卡中英文对照
2、工件变形
Roll up round workpiece to warp
设备三辊间隙、平行度调整不当
Equipment roller gap and parallelism adjustment unsuitable
通过机体上的标尺尺寸，调整机体上部的四个调整螺丝，使两边的尺寸一致。
Through the 4 adjustment screws of the adjustment organism top and size of staff gauge on organism, make the size of both sides consistent.
操作步骤
Operate step
1、合上总电源开关；拔出急停按钮，打开钥匙开关，启动液压站电机。
Join total mains switch; Pull out emergency stop button , open key switch , start hydraulic station generator.
设备操作流程英语
设备操作流程英语Device Operation ProcessWhen operating a device, it is important to follow a specific set of steps to ensure safety and efficiency. Below is the process for operating a typical device.Step 1: Read the Instruction ManualBefore using the device, it is crucial to read the instruction manual thoroughly. This will provide important information on how to operate the device safely and effectively.第一步：阅读说明书在使用设备之前，非常重要的是要仔细阅读说明书。
这将提供有关如何安全有效地操作设备的重要信息。
Step 2: Prepare the DeviceEnsure that the device is in good working condition and properly set up for operation. This may include checking for any visible damage, ensuring that all parts are in place, and connecting the device to a power source if necessary.第二步：准备设备确保设备处于良好的工作状态，并且已经妥善设置好以进行操作。
这可能包括检查是否有任何可见的损坏，确保所有部件都就位，并在必要时将设备连接到电源。
Step 3: Power On the DeviceIf the device requires power, turn it on using the designated power button or switch. Wait for the device to complete its startup process before proceeding to the next step.第三步：打开设备的电源如果设备需要电源，使用指定的电源按钮或开关将其打开。
机械操作指南翻译词汇
active plate活动板administration/general affairs dept总务部air-cushion eject-rod气垫顶杆alkalidipping脱脂alkaline etch龄咬annealing退火Anodize阳性处理approved by / checked by / prepared by核准/审核/承办approved by核准Assembly line 组装线assembly组装assistant manager助理augular offset角度偏差automatic screwdriver电动启子auxiliary fuction辅助功能available material良品可使用Bbaffle plate挡块barcode scanner 条码扫描器barcode 条码barcode条码be put in storage入库beacon警示灯bezel panel 面板bezel斜视规blanking穿落模blinster气泡blush 导色bolt螺栓boring镗bracket小磁导bushing block衬套buzzle蜂鸣器Ccam block滑块cam driver铡楔capability能力carbonization碳化carton 纸箱cause analysis原因分析cause description原因说明chassis 基座checked by初审Chromate铬酸处理cleaning cloth抹布club car高尔夫球车coil stock卷料cold slug冷块common equipment常用设备compound die合模concave凸conclusion结论convex凹Conveyer 流水线物料板coolant冷却液coordinate座标cosmetic inspect 外观检查cover plate盖板crank shaft曲柄轴crusher破碎机cushion缓冲DD.I. rinse纯水次decision items决议事项defective product label不良标签defective product/non-good parts不良品defective products不良品defective to staking铆合不良defective upsiding down抽芽不良deficient manufacturing procedure制程不良deficient purchase来料不良degate打浇口degrease脱脂dejecting顶固模delamination起鳞demagnetization去磁;消磁dents压痕department director部长department部门deputy manager | =vice manager副理deputy section supervisor =vice section superisor副课长derusting machine除锈机desmut剥黑膜die locker锁模器difference quantity差异量dismantle the die折模disposed goods处理品disposed products处理品drag form压锻差drill铝dryer烘干机Eedge finder巡边器EDM放电机education and training教育与训练electrical sparkle电火花embedded lump镶块EMI gasket 导电条expansion dwg展开图Ffactory director厂长factor系数fasten 锁紧(螺丝)feature die公母模feeding is not in place送料不到位female die母模fillet镶;嵌边final inspection终检finished products成品finished product成品fit together 组装在一起fixture 夹具(治具)flow chart流程表单forklift叉车form block折刀front plate 前板fuse machine热熔机fuse together 熔合Ggas mark焦痕gauge(or jig)治具general manager总经理good product/accepted goods/ accepted parts/good parts良品good products良品gouge沟槽;凿槽granule=peuet=grain细粒grinder磨床grind磨grit maker抽粒机grit 砂砾grit沙砾groove punch压线冲子group leader/supervisor组长。
设备标牌中英文对照
设备标牌中英文对照一、前言设备标牌是工业生产中常见的一种标识方式，通过标牌可以清晰地了解设备的基本信息和操作规程。
在国际化的今天，越来越多的企业希望将设备标牌同时标注中英文，以便吸引更多的国际客户或便于外籍员工使用设备。
本文将介绍一些常见的设备标牌中英文对照，方便读者参考和使用。
二、设备名称中文英文设备名称Equipment Name机床Machine Tool液压机Hydraulic Press起重机Crane电焊机Welding Machine搅拌机Mixer压力机Press注塑机Injection Molding Machine磨床Grinder车床Lathe三、设备参数中文英文设备参数Equipment Parameters长度Length宽度Width高度Height重量Weight电压Voltage电流Current功率Power频率Frequency温度Temperature湿度Humidity四、安全警示语中文英文安全警示语Safety Warning Message高压危险High Voltage Danger警告Warning停止Stop危险区域Danger Zone非作业人员禁止入内No Entry for Unauthorized Personnel 注意触电风险Beware of Electric Shock使用前请阅读说明书Read Instruction Manual before Use五、操作指南中文英文操作指南Operation Guide启动Start停止Stop调整Adjust清理Clean维修Repair更换零件Replace Parts保养Maintenance检修Overhaul紧固螺丝Tighten Screws注油Oil Injection六、注意事项中文英文注意事项Precautions请戴安全帽Wear Safety Helmet禁止吸烟No Smoking禁止接打电话No Phone穿戴防护服Wear Protective Clothing注意摔落物Beware of Falling Objects禁止拆卸No Disassembly禁止闲人停留No Loitering警示标志Warning Sign紧急停车Emergency Stop请勿触摸Do Not Touch七、总结设备标牌中英文对照在工业生产中具有重要的作用，它能够帮助用户更好地理解和使用设备，并提供必要的安全保障。
设备操作指南英文缩写
设备操作指南英文缩写When it comes to operating devices, it is essential to be familiar with the device's operation guide. In English, the operation guide is commonly referred to as the user manual or user guide. 运行设备时，熟悉设备的操作指南是至关重要的。
在英语中，操作指南通常被称为用户手册或用户指南。
These guides provide step-by-step instructions on how to use the device, including safety precautions, troubleshooting tips, and maintenance procedures. 用户指南提供了关于如何使用设备的逐步说明，包括安全注意事项、故障排除提示和维护程序。
For some people, reading an operation guide in English may pose a challenge if English is not their first language. 对于一些人来说，如果英语不是他们的母语，阅读操作指南可能是一个挑战。
However, there are ways to overcome this challenge. One option isto look for a translated version of the operation guide in one's native language. 然而，有办法可以克服这一挑战。
一种选择是寻找用户指南的本地语言翻译版本。
If a translated version is not available, using online translation toolsor seeking assistance from someone who is proficient in both English and one's native language can be helpful. 如果没有翻译版本，使用在线翻译工具或寻求擅长英语和母语的人的帮助可以有所帮助。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
4、设备运行时，工作人员严禁离开工作岗位，卷圆行程内严禁其他人员进入。
4、将条形板料水平放在送料道轨上，用手轻送至传动辊之间，设备自动将料卷入并完成一个完整的动作。
Put shape board material level in send material road rail on, use hand is material light send between transmission roller, equipment is drawn into voluntarily and is completed into a complete movement.
操作步骤
Operate step
1、合上总电控柜内的电源总开关。
Join the battery main switch in total electronic-controlled cupboard.
2、将转换开关打到手动位置，拔出急停按钮，打transfer switch to get move location, pull out emergency stop button , open key switch , operate air by hand to support reciprocating sport twice.
2、设备及设备的气撑必须自动复位后，才能继续下一个循环动作。
The air of equipment and equipment support must automatic reset after, then can continue next circulating movement.
3、设备在进行工作时，严禁任何人员检修、调整、紧固模具及其它松动部位。
When equipment runs , staff strictlies forbid to leave working post, roll is round to strictly forbid other people in route to enter.
5、检查上道工序送来的轮辋料尺寸：检查轮辋料的平行度是否≤0.5mm。
On inspection say process the rim material size that sent: Inspect the parallelism of rim material whether≤0.5 mm.
Shape board material processing becomes the course of circular state. Pawn shape board material from send material orbit send fashionable, board material is being curved and deformed under the role of 3 rollers , forms round, and from cylinder promote scraping wings will circular workpiece put to the market. This equipment offers round workpiece for rear road process.
设备操作指导卡
设备名称
Equipment name
轮辋卷圆机
Rim roll round machine
性能、用途及简单过程
Performance, use and simple course
条形板料加工成圆形状态的过程。当条形板料由送料轨道送入时，板料在三辊的作用下弯曲变形，形成圆形，并由气缸推动推料板将圆形工件推出。该设备为后道工序提供圆形工件。
注意事项
Notice item
1、开机前，清除送料道轨上的其它杂物，检查推料气撑的气压达到要求（≥6Kg/cm2），设备润滑油油量达到油标的2/3处。
Before start, clear away to send the other miscellaneous thing on material road rail, inspect to push the material angry atmospheric pressure that supported reach requirement (≥6 Kg/cm2 ), the equipment oil of lubricating oil quantity reach oil mark 2/3place.
3、开启电机，将转换开关转为自动位置，用手感应一下送料道轨上的感应开关，让设备自动完成一个完整的动作。
Open generator, it is automatic location to turn transfer switch , should send the induction on material road rail switch with feel , let equipment complete a complete movement voluntarily.
结构及部件
Structure and parts
总电控柜、控制操作柜、电机、变速箱、气缸、送料轨道、万向节、润滑系统、感应开关、机体等。
Always electronic-controlled cupboard, control operating cupboard, generator, gearbox and cylinder , send material orbit, universal joint, lubrication system, induction switch and organism etc..