日本VESSEL威威工具库存
威威VESSEL风批和电批头都有哪些型号
威威VESSEL风批和电批头都有哪些型号威威VESSEL风批GT-S6.5D威威VESSEL风批GT-P8D威威VESSEL风批GT-P10SII威威VESSEL风批GT-P6T威威VESSEL风批GT-P8T威威VESSEL风批GT-S4TFG威威VESSEL风批GT-S4TFS威威VESSEL 风批GT-S4TFR威威VESSEL风批GT-S4TG威威VESSEL风批GT-S4TS威威VESSEL风批GT-S4TR威威VESSEL风批GT-S5TFG威威VESSEL风批GT-S5TFB威威VESSEL风批GT-S5TFR威威VESSEL风批GT-S5TG威威VESSEL风批GT-S5TB威威VESSEL风批GT-S5TR威威VESSEL风批GT-S5TS威威VESSEL电批头B35威威VESSEL电批头D76威威VESSEL电批头D73威威VESSEL电批头EPH206 威威VESSEL电批头EPH204 威威VESSEL电批头EPH205 威威VESSEL电批头EPH207威威VESSEL电批头EPH-208 威威VESSEL电批头EPH209威威VESSEL电批头EPH210威威VESSEL电批头EPH211威威VESSEL电批头EPH212威威VESSEL电批头EPH213威威VESSEL电批头EPL223威威VESSEL电批头EPL224威威VESSEL电批头EPL225威威VESSEL电批头EHW231威威VESSEL电批头EHW232威威VESSEL电批头EHW233威威VESSEL电批头EHW234威威VESSEL电批头EBX242威威VESSEL电批头EBX243威威VESSEL电批头EBX244威威VESSEL电批头EBX246威威VESSEL电批头ETX250威威VESSEL电批头ETX251威威VESSEL电批头ETX252威威VESSEL电批头ETX253威威VESSEL电批头ETX254威威VESSEL电批头ETX258威威VESSEL电批头ETX259威威VESSEL电批头EBX245威威VESSEL电批头EBX247威威VESSEL电批头ETX255威威VESSEL电批头ETX256威威VESSEL电批头ETX257。
唯特利（Victaulic）W07型AGS
如需产品安装、维护或支持信息，请参考本文档末的信息。
1.0 产品描述供货尺寸：• 1 – 12"/DN25 – DN300• 14 – 24"/DN350 – DN600 的尺寸，请参考 20.02 号技术文件: Victaulic （唯特利）W07 型 AGS ™ 刚性卡箍 最大工作压力：• 支持的压力额定值从真空（29.9 in Hg/760 mm Hg ）到750 psi/5171 kPa/52 Bar • 工作压力视管道材料、壁厚和尺寸而定应用：• 连接 Victaulic （唯特利）原始沟槽系统(OGS)辊槽管和切槽管、阀门、管件及配件• 提供刚性管道连接，可限制轴向或角向移动。
如需抗扭强度的相关信息，请与 Victaulic （唯特利）联系。
管道材料：• 碳钢• 关于不锈钢管的用途，请参考17.09 号技术文件：用于不锈钢管道的 Victaulic （唯特利）沟槽卡箍性能数据。
• 有关例外情况，请参阅第 6.0 节“通知”管道制备• 切槽或辊槽，依照25.01号技术文件：Victaulic （唯特利）标准沟槽规格规范要求：• 支撑和悬挂要求符合 ASME B31.1 电力管道规范和 ASME B31.9 建筑服务管道规范和 NFPA 13 喷淋系统要求2.0 认证/列名EN 10311CPR (EU)No. 305/2011BS EN 10311CPR (UK)2019 No. 465注• 如需消防认证/列名参考指南，请下载10.01号技术文件。
•有关适用的饮用水认证，请参见02.06号技术文件：Victaulic （唯特利）饮用水认证 ANSI/NSF 。
Victaulic ®（唯特利™）Zero-Flex ™刚性卡箍07 型06.02-CHI3.0 规格 – 材料壳体：符合 ASTM 之 65-45-12 等级要求的球墨铸铁。
根据特殊要求，可提供符合 ASTM A395 之 65-45-15 等级要求的球墨铸铁。
维吉尔（Victorinox）到 handling swiss knife说明书
Remote Site Upload/Download
The MS-5024UD may be downloaded or uploaded, without affecting the system fire protection.
Download system programming. Upload key system information:
3 Current system status, history and walk test files. 3 Zone, AC line, NAC 1 and NAC 2, Resettable Power
Single-person walk test. Fire drill function. Zone disable capability (software). 32-Event history buffer with time and date stamp. Accurate real-time clock/calendar. Extensive built-in transient protection. Electronics and operational controls fully enclosed in a
Specifications
Single PC board design using Surface Mount Technology (SMT).
Two modular telephone jacks for connection to RJ31X/ Modules.
AC Power
120 VAC, 50/60 Hz, 2.3 amps. 230 VAC, 50 Hz, 1.2 amps ("E" suffix). Wire size: minimum 14 AWG with 600-volt insulation. Built-in brownout circuitry. Built-in voltmeter.
维尔夫手动闸阀长久储存说明说明书
Engineered Valves1110 Bankhead AvenueAmory, MS 38821Tel: (662) 256-7185Fax: (662) 256-7932 Recommended Long Term Storage Procedure for Fabri-Valve® ProductsI. Handwheel, Lever, or manual gear operated gate valve.A. ObjectiveThe following are Fabri-Valve's recommendations for storage procedures to retain maximum product integrity during long-term storage of 1 to 5 years.B. Location1. The preferred storage location is a clean, dry, protected warehouse.2. If valves are to be stored outside, precautions should be taken to keep valves clean and dry.C. Equipment OrientationValves may be stored in the vertical or horizontal position.D. Storage Preparation1. Valves may be stored as shipped, provided the above storage location and equipment orientationinstructions are followed2. If valve shipping condition must be altered for receiving inspection reattach flange covers andrepackage valve.3.Then follow the above Instructions for location and equipment orientation.NOTE: O-ring valves should be stored with the gate slightly open (Gate off of seating wedges)E. Storage Inspection1. Visual inspection shall be performed on a semi-annual basis and results recorded.2. Visual inspection as a minimum shall include checking the following: Packaging, Covers,Dryness, and Cleanliness.F. MaintenanceMaintenance shall consist of correcting deficiencies noted during inspection. All maintenanceactivity shall be recorded.II. Cylinder Operated Gate ValveA. ObjectiveThe following are Fabri-Valve's recommendations for storage procedures to retain maximum product integrity during long-term storage of 1 to 5 years.B. Location1. The preferred location is a clean, dry protected warehouse.2. If valves are to be stored outside, precautions should be taken to keep valves clean and dry.C. Equipment Orientation1. The preferred orientation for optimum protection of cylinder is with the valve fully opened andwith the cylinder in the vertical position.2. An acceptable alternate for valves with cylinder diameters 6" or less is with the cylinder in thehorizontal position.3. If valves with cylinders larger than 6" in diameter must be stored with the cylinder in thehorizontal position then the cylinder must be operated 6-12 times every 3-4 months.NOTE: O-ring valves should be stored with the gate slightly open (Gate off of seating wedges)D. Storage Preparation1a. For storage of up to 3 years - Squirt a good grade of hydraulic oil into cylinder ports and operate cylinder 6-12 times on a yearly basis1b. For storage of 3-5 years - Squirt a good grade of hydraulic oil into cylinder ports and operate cylinder 6-12 times. Extend cylinder rod, until valve is fully closed. Then coat cylinder gland and rod with heavy grease. Retract cylinder rod until valve is fully open, drawing good grade of hydraulic oil into rod end of cylinder.2. Securely plug cylinder ports with pipe plugs, if cylinder is not piped.3. Cover flange faces with flange covers. Plywood flange covers installed at factory are acceptable.4. Then follow the above instructions on location and equipment orientation.NOTE: O-ring valves should be stored with the gate slightly open. (Gate off of seating wedges)E. Storage Inspection1. Visual inspection shall be performed on a semi-annual basis and results recorded.2. Visual inspection as a minimum, shall include checking the following: Packaging, Covers,Dryness and Cleanliness.F. MaintenanceMaintenance shall consist of correcting deficiencies noted during inspection. All maintenanceactivity shall be recorded.III. Electric Motor Operated Gate Valve - Normal StorageA. ObjectiveThe following are Fabri-Valves recommendations for storage procedures to retain maximum product integrity during long-term storage of 1 to 5 years.B. LocationValves to be stored in a clean, dry protected warehouse, free from excessive vibration and rapidtemperature changes.NOTE: The maximum source of equipment deterioration anticipated during long-term storage is from possible condensation within the actuator enclosure that may be produced by rapid temperature changes. The user should consider the addition of heat sources in the electrical enclosures during storage.C. Equipment Orientation1. The preferred storage position is with the valve stem and motor shaft in the horizontal positionand the actuator limit switch compartment cover vertically up.2. An acceptable alternate position is with the valve stem vertical, the motor shaft horizontal and thelimit switch compartment cover either facing to the side or vertically up.3. The assembly shall be stored off the floor on suitable skids and shall be covered with an unsealeddust cover with the bottom open and air holes in the side.NOTE: O-ring valves should be stored with the gate slightly open (Gate off of seating wedges)D. Storage Preparation, Inspection and Maintenance1. For storage situations of 1 to 2 years maximum, spray electric contacts with CRC #2-26. (Thispreservative does not have to be removed prior to usage of the actuator.)2. For storage situations between 2 and 5 years, spray electric contacts with CRC Lectra Shieldspray coating. (This coating must be removed with a suitable cleaner, such as any standard petroleum solvent, prior to making electrical connections.)3. Cover flange faces with flange covers. Plywood flange covers installed at factory are acceptable.E. Storage InspectionI. Visual inspection shall be performed on a semi-annual basis and results recorded.2. Visual inspection as a minimum, shall include checking the following: Packaging, Plugs, Covers,Dryness, Cleanliness, and Function of heat sources (when used).F. MaintenanceMaintenance shall consist of correcting deficiencies noted during inspection. All maintenanceactivity shall be recorded.IV. Storage of Rubber ProductsWhile the various rubbers possess differing degrees of resistance to the deteriorating influences which may be present during storage, the same general recommendations apply to all. Vulcanized rubber products should be stored in a cool, dry, dark place away from steam pipes, sunlight, etc. The Pro duct should be supported so that no portion of it is under undue stress from loading or bending. For example, replacement seals should not be hung over a hook or allowed to kink, but should be stored in a flat position. Seals in assembled valves and actuators should be positioned to minimizecompression on the seals. For example valves stored in vertical position with the gate or disc open will minimize the chance for compression on the seals.。
EW-29电动踏车说明书
EW-29 Owner’s ManualTable of ContentsPage 2 - Feature GuidePage 3 - Product SpecificationsPage 4 - Operation of ScooterPage 6 - Charging and Battery Maintenance Page 7 - Ramps and CurbsPage 7 - GeneralPage 8 - Use While Under InfluencePage 8 - Safety RequirementsPage 10 - WarrantyFolding Seat Lock HeadlightRear Basket Throttle Front BasketChain Tensioner Chain Guard Front Wheel MotorTechnical SpecificationsOperation of Scooter:1.Turning on the powerInsert key into ignition underneath the seatand turn clockwise to turn the scooter on. Thebattery indicator will display the currentcharge level when on. Turn the key counter-clockwise to power off when stopped.2.Speed ControlThe black twist grip throttle controls acceleration. Twisting the throttle grip towards you will increase the speed. Releasing the throttle grip will reduce the speed gradually while on a level surface.3.Battery PowerThe current charge and speed will be displayedwhen the scooter is on. The screens display will notdisplay when the scooter power is off. The tripindicator will automatically reset when the scooteris turned off.4.HornThere is a yellow horn button on the left side ofthe handlebars. Press button to sound the horn.5.Headlight SwitchThe headlight is controlled with switch on theheadset.-The “I” Symbol is on-The “O” Symbol is off6.Seat Folding and Stabilizing BoltThe seat is locked in place to avoid removal ofthe battery without keys. The stabilizing boltkeeps the seat stable. Remove the stabilizingbolt, and turn the key left to release the seatlock. This step must be completed before thebattery can be removed.Key Lock -Stabilizing Bolt -7.Battery Pack Power Cable and Charger PortTo access the battery pack, insert thesecondary key into the side of the left-handtrunk latch release lock cylinder. The batterycan be charger separate from the scooterusing the provided smart charger.Charger Port /Scooter Power CableBeing Pointed toCharging Instructions:The smart charger included with your scooter will shut off when the scooter is fully charged. When the light on the charger is red, the scooter is still charging. When the light turns green, this means the scooter is fully charged. Once fully charged, unplug within two hours to avoid overcharging.The charging time varies depending on how charged the batteries are. If almost empty, the charge time may take up to 8 hours. If the red lights stays on for more than 8 hours, unplug the charger.Batteries and Battery Maintenance:Only use lithium ion batteries that are and maintenance free for your scooter. Lithium ion batteries are specifically designed to decrease weight and size.Battery Type: (4) 12 volt, 12 AH Maintenance Free, Deep Cycle, Sealed Lead Acid.Note:-Do not use lithium ion batteries. They are not designed to be in this scooter.-The useful life of a battery is quite often a reflection of the care it receives.-Always charge the batteries in a well-ventilated area.-The charger is intended for indoor use only.-Replace all battery cells at the same time if weak.-If the scooter will not be used for an extended period, arrange to have the batteries recharged at least once every month to avoid deterioration of the batteries.Ramps and Curbs:1.Check that the ramp surface is roughened to prevent slipping. Never drive across a slope or turnsharply on a slope.2.When driving up curbs, always check the height of the curb to ensure that it does not exceed 4”height.3.Always go forward up ramps and curbs.4.Avoid stopping completely when going over small objects or obstructions.General:1.Always keep your feet on the scooter.2.Do not exceed the weight capacity of 400lbs.3.Do not attempt to lift or move the scooter by any of its removable parts. Personal injury anddamage to the scooter may result.4.Never try to use your scooter beyond its limitations as described in the manual.5.Do not operate your scooter if it is not functioning properly.6.Do not connect any electrical or mechanical device to the scooter. Failure to obey this instructionmay result in injury and will void the warranty.7.Always comply with local laws and regulations.8.It is very important that power plug is inserted and plugged firmly into battery for electrical poweroperation.9.Always inspect the scooters mechanical components and tires prior to operation.10.Know and practice the rules of safe and responsible riding.Use While Under the Influence of Medication or Alcohol:1.Check with you physician if you are taking any medication that may affect your ability to operateyour scooter safely.2.Do not operate your scooter while you are under the influence of alcohol as this may impair yourability to operate your scooter in a safe manner.Safety Requirements:Driving SurfaceThe EW-29 has the best stability and performs the best under the normal driving conditions (dry, level ground with concrete or asphalt). Extra care must be taken when riding on other surfaces (grass, gravel, etc.).DO NOT exceed the specified climbing angle. Do not operate the scooter before you have fully read and understood the manual.∙Always turn the scooter off and set the rear kickstand before getting on or off the scooter.∙Avoid driving in loose gravel, covered soil, and sandstone.∙Do not drive the scooter in unknown road conditions.∙The scooter can ride over small obstacles within a certain height, but you must minimize the speed and slowly drive over the obstacle.∙Do not operate the scooter under the influence of drugs or alcohol.∙Do not park on steep slopes.∙Changing the initial setting of refitting your scooter is forbidden.∙Use caution when operating near busy streets, markets, or shopping centers. Do not operate in unsafe areas.∙Consult local authorities about the traffic rules for scooters in your city.∙Hold the handlebar with both hands and put both feet on the floorboard always while operating the scooter.∙Never sit on the scooter in a moving vehicle.∙Do not operate on uneven slopes or uneven ground; be careful when passing over slopes.∙Never take the scooter on an escalator.∙Do not operate on frozen, slippery, or salty roads.∙Never let the batteries freeze; do not charge when frozen.∙Make sure the batteries are fully charged before operating.∙Do not let the batteries every go completely dead. When low, do not let sit for an extended period or damage may occur.∙Always use required safety equipment while operating.∙Do not modify or change the electrical system and frame. Doing so will void the warranty.Warranty:For valid warranty claims E-Wheels will, at their discretion, replace/repair/refund items mutually agreed to be defective.E-Wheels warranty as following:1.Electronic components: (1) year limited warranty.2.Controllers: (1) year limited warranty.3.Batteries: Not warranted4.Consumables: Not warranted (Tires, tubes, seat cushions, etc)5.Warranty does NOT cover labor costs.Any damaged or defect of any nature occurring from the misuse of the product is not to be covered. The warranty is to start from the date of arrival of our product.10。
Leviton Daylight Harvesting与Scene Control解决方案说明书
Simple, Integrated Daylightingand Scene ControlEasy solutions for energy savingsand occupant comfortLeviton Switching Photocell and Dimensions® D4000A COMPLETE, SIMPLIFIED SOLUTION FOR DA YLIGHT HARVESTINGCreate a simple daylighting system using a Dimensions® D4000 lighting controller and a switching photocell. Combining a switching photocell with a new or existing D4000 system is a cost-effective solution with minimal installation requirements.PROBLEMCommercial facility with Dimensions D4000 system requires a simplified switching lighting control solution with zone and scene control benefits.• Solution must provide switching of lighting loads when ambient daylight is present in the space for energy savings• Solution must meet ASHRAE Standard 90.1 2016 requirements for daylight harvesting• Existing facility already contains a Dimensions system for architectural lighting control• Facility contains LED or other lighting loads SOLUTIONCombine switching photocells with a Dimensions D4000 lighting controller for a quick, effective daylight harvesting solution.• Switching photocell communicates with the D4000 controller to trigger a daylighting scene when enough ambient light is present in the space, and a normal scene when light falls below the set point• Solution meets ASHRAE 90.1 Sections 9.4.1.4 and 9.4.1.5 for Automatic Daylighting Control• Switching photocell works with new or existing D4000 controllers• Switching photocell provides a low-cost solution with significantly less installation requirements than more complicated centralized or distributed lighting control systems• Switching photocell and D4000 are LED ready for 0-10V LED or other lighting loadsLeviton Manufacturing Co., Inc. Energy Management, Controls and Automation 20497 SW Teton Avenue, Tualatin, OR 97062 tech line 800-959-6004 fax 503-404-5594© 2017 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.G-9451A/D17-aa REV APR 2017Switching Photocell and D4000 Lighting Controller Daylighting SolutionConfiguration and Programming Notes:• Connect the switching photocell to the AUX input of the D4000• Connect the lighting loads and/or power extenders to the D4000• Set the switching threshold at the photocell• Program scenes including “daylighting” and “normal” at the D4000 controller• Configure scheduler, load types and other standard configuration options at the D4000 controller• Configure the D4000 AUX/Occ Input for the active state to trigger the “daylighting” scene • Configure the D4000 AUX/Occ Input for inactive state to trigger the “normal” sceneDisclaimer: This document is for informational purposes only. Each project will have its own specific requirements for satisfying ASHRAE 90.1 and Title 24 code compliance based on a variety of factors. Other exceptions or details may apply. Review the code for specific requirements and/or consult with a professional advisor. Leviton Mfg. Co., Inc. is not responsible for any loss resulting from the use of any information found in this document.Solutions are subject to change without notice. For additional assistance, contact your local Leviton representative.2-Wire ControlledLED Load 0-10V ControlledLED LoadLighting ControllerSwitching PhotocellD4000 Controller:• Recommend the D4104, D4106, D4206 or D4200 controller depending on desired configuration and load control type. Refer to data sheet for additional informationConstant PowerConstant PowerLeviton Manufacturing Co., Inc. Global Headquarters201 North Service Road, Melville, NY 11747-3138 tel 800-323-8920 fax 800-832-9538tech line (8:30AM-7:00PM ET Monday-Friday) 800-824-3005Leviton Manufacturing Co., Inc. Energy Management, Controls and Automation20497 SW Teton Avenue, Tualatin, OR 97062 tel 800-736-6682 fax 503-404-5594tech line (6:00AM-4:00PM PT Monday-Friday) 800-954-6004Visit our website at: /sensors©2017 Leviton Manufacturing Co. Inc. All rights reserved. Subject to change without notice.。
库存详单
1 1
DDJNL3225P 15 RF123E15-2525B 头刀片刀杆 山特两毫米双
1 1
二手 八成新
LF123G20-3225B
全新原装山 1
山特单头四 山特单头四毫 山特单头三 1 2 2 1 0 5 1 XXXXXXXXXX XXXXX XXXXXXXXXXXX 原装全新 九成新一只 原装全新
480P
N151.2-3004-30-5T 1125 N151.2-300-30-5P R151.2-300 05-5F 1125 1125
三毫米切断刀 圆头的
N151.2-300-30-4P 235 N151.2-4008-40-5T 1125 N151.2-4004-40-5T 1125 N151.2-5004-50-5T 1125 N151.2-500-5E 1125 N151.2-500-40-5P 1125 890 000211L20625-1 1015 341.G.600-247 S512 5322 266-02 TMTL-TLF-453650 4125 VBMT 16 04 08-KF3005 VBMT 16 04 04-KF3005 VBGT 160408-UM S05F VNMG 160408-SF S05F DNMG 150608-SF S05F DNMG 150408-SF S05F DNMG 150404-SF S05F DNGP 150604 S05F DNMX 150612-WM 4215 DNMG150612-RM 4225 CNMG 120408-SF S05F
410P 79P 9P 20P 30P 21P 160P 8P 20P 100P 14P
.1
杰威尔工业 MightyMite 4-杠膝部设备说明书
MIGHTYMITE 4-BAR KNEEINSTRUCTION SHEETNote : Assembly shown above is part number FC100510, which includes the MightyMite Knee (FC100500) and the Pyramid Attachment (FC100501).ItemDescriptionPart No. 1 MightyMite 4-Bar KneeFC100500 2 30mm Bolt for Pyramid Attachment61621 3 20mm Bolt for Slide Attachment 61629 4 20mm Bolt for 4-Hole Attachment 61629 5 20mm Bolt for Threaded Attachment 61629 6 Extension Spring Housing 61611 7 Extension Stop Spring, .210” long 61696 8 Extension Stop Spring, .220” long 61697 9 Spring Guide 61612Extension Assist Spring Color Resistance PartNo. Orange Less61643 Yellow 61644Green61645 Pyramid AttachmentFC1005014-Hole AttachmentFC100503Threaded Attachment FC100504 Slide Attachment FC100502 Extension Assist Spring 61643 through 61646 Locking Bar61635 1 O F 42710 Amnicola Highway Chattanooga, TN 37406 423.624.0946 Fax 423.629.79361) Sagittal Alignment:a) Preflex interface 5 degrees more than measured hip flexion contracture (if any). b) Place ¼” airspace under heel of shoe.c) Find Medial Bisection of interface and use plumb line to project distally. d) Zero pyramid adjustments at ankle.e) Medial Bisection Plumb Line should bisect ankle attachment.f) Centerline of knee attachment should be 20mm anterior of Medial Bisection Plumb Line. 2) Coronal Alignment:a) Project plumb line from socket bisection distally.b) Bi-section of ankle should be placed to desired amount of outset. c) Outset changes with limb length 0-65mm from Ischium.3) Height Adjustment:a) Upper link approximates Knee Center for height measurement.b)Anatomic Knee Center is found halfway between Adductor Tubercle and MTP.1/4" AirspaceUnder Shoe1/4" Airspace Under ShoeBisect Heel2 O F 44) Adjust Initial Flexion Stability:a) Observe patient in parallel bars and flex knee.b) If more stability is needed, first plantarflex foot slightly.c) If still more stability is required, shift interface anterior. 5) Extension/Flexion Friction Adjustment:a) Set Extension/Flexion Friction Adjustment to limit heel rise and terminal impact. b) Selection of extension assist spring will also affect swing rate. 6) Rotation Adjustments:a) 360 degree adjustment is available with proximal attachment bolt.b) Loosen proximal attachment both with 6mm allen wrench, adjust and retighten.c) Proximal attachment works with interference taper which must be cleaned prior to assembly tofunction properly.d) Torque the bolt to 190in-lb (21.5N-m) using a torque wrench.e) Loctite Thread Locker 242 should be applied to the 8mm attachment bolt and on all smallscrews. Do not apply Loctite to the taper. 7) Remove or Install Extension Assist Spring:a) Turning counter-clockwise, remove the Extension Assist Spring Housing, which is threaded intothe distal 22mm Tube Clamp Adaptor.b) Four spring rates are provided, progressing from orange with the least compression resistance, toyellow, then green and finally blue which has the greatest compression resistance.c) Install desired spring with the spring guide in contact with the anterior link and turn housingclockwise until seated. Hand tighten only. Use the hole through the bottom of the spring housing only for removal. Overtightening the spring housing may damage the threads.Installing the spring is easiest when the posterior proximal axle has been removed as described in section 9.d) Caution! If the spring guide is not installed the spring will damage the knee and void thewarranty.e) The Locking Bar replaces the Extension spring to lock the knee at full extension for fitting,training and evaluation. 8) Distal Connection:a) Caution! Do not use spacers or shims if pylon tube is too short, replace with correct lengthpylon tube.b) Loctite Thread Locker 242 should be applied to the 5mm Pinch Bolt and torqued to 7ft-lb/10N-musing a torque wrench.3 O F 4Extension/Flexion Friction AdjustmentProximal Attachment22mm Tube Clamp Adaptor Extension Assist Spring Housing Proximal Attachment Bolt/ Rotation Adjustment9) Replace/Exchange Urethane Bumper a) Remove the Proximal Adaptor.b) Remove Posterior Link set screw using a 3/32” wrench.c) Hyperflex knee as shown below and push out posterior proximal axle. d) Rotate knee top forward as shown to the right. e) Pry out plunger carefully.f) Remove the urethane spring and slide in the new one. Urethanesprings are supplied in two lengths. The longer spring (61697) may be required for high activity levels or where stiffer extension springs are fitted.g) Replace the plunger and rotate the knee top back into hyperflexedpositionh) Line up the shaft holes and slide washers back into place. Reinsert shaft. i) Return knee to extended position. Apply Loctite 242 to the set screw andtighten it back into place.4 O F 4。
日本三丰MITUTOYO卡尺的使用方法.doc
新杉本贸易教您使用日本三丰游标卡尺的方法：游标卡尺是工业上常用的测量长度的仪器，它由尺身及能在尺身上滑动的游标组成，如图2．3－1所示。
若从背面看，游标是一个整体。
游标与尺身之间有一弹簧片（图中未能画出），利用弹簧片的弹力使游标与尺身靠紧。
游标上部有一紧固螺钉，可将游标固定在尺身上的任意位置。
尺身和游标都有量爪，利用内测量爪可以测量槽的宽度和管的内径，利用外测量爪可以测量零件的厚度和管的外径。
深度尺与游标尺连在一起，可以测槽和筒的深度。
尺身和游标尺上面都有刻度。
以准确到0．1毫米的游标卡尺为例，尺身上的最小分度是1毫米，游标尺上有10个小的等分刻度，总长9毫米，每一分度为0．9毫米，比主尺上的最小分度相差0．1毫米。
量爪并拢时尺身和游标的零刻度线对齐，它们的第一条刻度线相差0．1毫米，第二条刻度线相差0．2毫米，……，第10条刻度线相差1毫米，即游标的第10条刻度线恰好与主尺的9毫米刻度线对齐，如图2．3－2。
当量爪间所量物体的线度为0．1毫米时，游标尺向右应移动0．1毫米。
这时它的第一条刻度线恰好与尺身的1毫米刻度线对齐。
同样当游标的第五条刻度线跟尺身的5毫米刻度线对齐时，说明两量爪之间有0．5毫米的宽度，……，依此类推。
在测量大于1毫米的长度时，整的毫米数要从游标“0”线与尺身相对的刻度线读出。
游标卡尺的使用用软布将量爪擦干净，使其并拢，查看游标和主尺身的零刻度线是否对齐。
如果对齐就可以进行测量：如没有对齐则要记取零误差：游标的零刻度线在尺身零刻度线右侧的叫正零误差，在尺身零刻度线左侧的叫负零误差（这件规定方法与数轴的规定一致，原点以右为正，原点以左为负）。
测量时，右手拿住尺身，大拇指移动游标，左手拿待测外径（或内径）的物体，使待测物位于外测量爪之间，当与量爪紧紧相贴时，即可读数，如图2．3－3所示。
游标卡尺的读数读数时首先以游标零刻度线为准在尺身上读取毫米整数，即以毫米为单位的整数部分。
然后看游标上第几条刻度线与尺身的刻度线对齐，如第6条刻度线与尺身刻度线对齐，则小数部分即为0．6毫米（若没有正好对齐的线，则取最接近对齐的线进行读数）。
VESSEL威威No.700螺丝刀和No.730的区别
1. No.980 系列冲击式螺丝刀☆产品说明：①手柄内部采用独特的贯通回旋设计，敲击螺丝刀底部，前端瞬间反向回旋12 °，尤其适用于生锈，破损螺丝的拆卸②手柄采用三面细纹防滑设计，并有效防止油渍附着附带视频介绍，请详细参考③前端强力磁性加工④螺丝刀身采用混合钒元素的超硬钢材，避免螺丝刀头打滑，崩裂 ⑤全身硬化加工，通过 ECO, RoHS 环保认证2. No. 700 （不可敲击）No.730 系列弹性手柄贯通可敲击螺刀☆产品说明：①柄部配有GEL 弹性软垫，使用时GEL 软垫会随伴握转方向同时移动，明显降低手的劳累感，手感极佳。
②螺丝刀身采用混合钒元素的超硬钢材，避免螺丝刀头打滑，崩裂③全身硬化加工，通过ECO, RoHS 环保认证④前端强力磁性加工⑤螺丝刀刀身采用黑铬元素镀膜，防止生锈⑥尺寸齐全，适用于各种工序。
十字系列采用红色，一字系列采用紫色搭配螺丝刀手柄，视觉感分明，容易区分。
使用实例照片注明 No.730 贯通可敲击螺丝刀握柄后部配有银色五角星No.700 螺丝刀握柄后部没有配有银色五角星避免螺丝刀头打滑，崩裂，全身硬化加工，通过 ECO, RoHS 环 保认证，螺丝刀刀身采用黑铬元素镀膜，防止生锈。
最适合狭窄空 间使用附带视频介绍，请详细参考深圳市 杉本 贸易有限公司 联系人：张 生 手 机： 13 430480777 QQ ： 285 0148 5994. No. 内六角扳手 8806BP （6 组套）, 8809BP （9 组套） ☆3. No. 720 系列弹性手柄圆球型螺丝刀产品说明：柄部配有 GEL 弹性软垫，螺丝刀身采用混合钒元素的超硬钢材，产品说明：①全身硬化处理，采用国际色标，现场使用时可通过颜色快速区分前端尺寸，采用开合式套装设计，便于使用和保存。
②ball 端采用特殊削切加工，最大可倾斜35 °③内六角端短轴设计，非常适用于狭小空间的使用④实际使用实例工，增加与螺丝的摩擦，降低螺丝前端自身磨损。
Caviwave 超声洗涤仪说明书
CAVIWAVE ULTRASONIC CLEANING SYSTEMSONIC CONSOLE WASHER/DRYERItem ________________________Location(s)_______________________________________________(Typical only - some details may vary.)The Selections Checked Below Apply To This Equipment208 V, 60 Hz, 3ph (Standard)208 V, 60 Hz, 1ph240 V, 60 Hz, 1ph 11-gal (42 L) Tank15-gal (57 L) Tank20-gal (76 L) TankLeft-to-RightRight-to-Left11-gal (42 L) Tray 15-gal (57 L) Tray 20-gal (76 L) TraySeismic DesignAdditional Port Flushing KitAPPLICATIONThe Caviwave Sonic Console Washer/Dryer is designed to thoroughly wash (remove tissue, blood and other contaminants), rinse and dry instruments prior to final disinfection andsterilization as required. The Caviwave Ultrasonic Cleaning System’s compact design makes it suitable for use in the Operating Room, Central Supply or other high volume area to process pre-cleaned instruments.DESCRIPTIONThe Caviwave Ultrasonic Console Washer/Dryer is a freestanding instrument washer, rinser and dryer supplied in a compact stainless-steel cabinet. The Sonic Console Washer/Dryer contains all needed components to effectively clean (utilizing ultrasonic cavitation passing through a detergent-balanced wash solution), thoroughly rinse and adequately dry surgical instruments prior to disinfection and sterilization.The console washer/dryer is equipped withautomatic opening lids and load elevators for easy and safe instrument loading.Cleaning and rinsing/drying chambers are positioned for either left-to-right or right-to-left workflow.STANDARDSThe Caviwave Ultrasonic Cleaning System meets the applicable requirements of the following standards:•EMC Directive 89/336/EEC, 92/31/EEC, 93/68/EEC.•Low Voltage Directive 73/23/EEC, 93/68/EE .•ETL Listed .•Underwriters Laboratories (UL) Standard 61010-1. •Underwriters Laboratories (UL) Standard 61010A-2-010.•Canadian Standards Association (CSA)Standard C22.2 No. 61010-1.• Canadian Standards Association (CSA) Standard C22.2 No. 61010-2-010.FEATURESThe Caviwave Ultrasonic Console is wired for operation on either 208 V (60 Hz, three phase or single phase), or 240 V, 60 Hz, single phase voltage. Unit can be configured for single phase. STERIS supplies all components necessary to obtain a complete working unit ready for (but not including) installation and connection to facility service lines. The Sonic Console Washer/Dryer includes the following features:Optimum Ultrasonic Cleaning Power is ensured by constant power output generators operating at 132 kHz and complemented with complex resonance frequencies to ensure lock-box cleaning efficiency. The generators are mounted with individual slide out modules for ease of service. Also, patented ceramically-enhanced transducer modules are bonded to the wash tank providing maximum energy transmission for instrument cleaning.Automatic Lid and E-Z Load Tray Elevator improve safety and increase instrument loading ease. E-Z Load Tray Elevator ispositioned at a convenient working height and is oriented laterally for ease of loading heavy instrument trays.Port Flushing System processes up to six rigid lumened surgical devices with both ultrasonic energy and internal flushing.Instrument Lubrication Cycles help to keep instruments functioning properly and promote efficiency in the surgical suite. Instrument lubrication can be injected into the rinse phase.Illuminated Main Controls include power ON/OFF, automatic fill, drain alert with cycle counter, adjustable wash cycle timer, drain actuator and lid actuator.Locking Caster Wheels are supplied for ease of Caviwave Ultrasonic Cleaning System Sonic Console Washer/Dryer movement. The four caster wheels add 2" (51 mm) to total Sonic Console height.Large Capacity Process Tanks (wash and rinse/dry) accept a large variety of instrument trays. One instrument tray is included with each unit. Tank weight capacity is as follows:•11-gal (42 L) tank holds 22 lb (10 kg) of instruments.•15-gal (57 L) tank holds 22 lb (10 kg) of instruments.•20-gal (76 L) tank holds 35 lb (16 kg) of instruments.Weight Capacity: 11- and 15-gallon holds 22 lb (10 kg) of instruments; 20-gallon holds 35 lb (15.9 kg) of instruments.Automatic Pushbutton Ultrasonic Drain with drain indicator light and built-in counter to provide wash cycle number tracking, alerts operator when ultrasonic tank needs drained. Adjustable cycle drain count preprogrammed to 12 cycles.Toe Touch Control lowers the instruments into the cleaning solution and starts the processing cycle. When cycle is complete, the lid automatically opens and instrument tray is raised to unload position.Two Chemical Probes are provided for one gallon containers of detergent and/or lubricant.Safety Interlocks and Controls are provided to ensure complete operator safety.Front and Side Service Access Doors are supplied on the unit for ease of any maintenance procedures. Access doors are scratch and dent resistant and sound dampened. Front doors have automatic power cut-off feature to protect components when doors open.Distilled Water and Instrument Lubricating Spray provides proper instrument lubrication extending instrument life.The Rinse Chamber provides the following:•External water spray•Internal flushing•Pure water rinse* and lubrication•Filtered compressed air through lumen devices.•Heated circulate air through tank chamber.*If pure water is not available, facility tap water is used.The base language of this document is ENGLISH. Any translations must be made from the base language document.PREVENTIVE MAINTENANCECustomers are encouraged to contact STERIS concerning our annual maintenance programs. Under the terms of these programs, preventive maintenance, adjustments and replacement of worn parts are provided on a scheduled basis to help ensure optimal equipment performance and help minimize untimely or costly schedule interruptions. STERIS maintains a worldwide staff of well-equipped, factory-trained technicians to provide these services, as well as on-site installation, training and expert repair services. Contact STERIS for details.NOTES1.Pipe sizes shown indicate terminal outlets only. Buildingservice lines (not provided by STERIS) must supply the specified pressures and flow rates.2.STERIS recommends that a dedicated, grounded electricalcircuit be provided for each unit. Extension cord and plug use is not recommended.3.Approximate net weight:»Model CR2-01/02: 825 lb (374 kg).»Model CR2-15: 900 lb (408 kg).»Model CR2-20: 950 lb (430 kg).4.Sonic Console Washer must be mounted on a hard, levelsurface.5.Caviwave Sonic Console Washer/Dryer is manufactured forSTERIS by Crest Ultrasonics.UTILITY REQUIREMENTSElectrical208 or 240 V, 60 Hz, 1-Phase (4 Wire) or 3-Phase (5 Wires including Neutral and Ground).Drain1-1/4" NPT CPVC Male Slip (trap and waste lines are not provided by STERIS).Distilled (Purified) Water (Optional)1/2" NPT CPVC Male Slip (15-50 psi); 100-120°F (38-49°C). Hot Water1/2" NPT CPVC Male Slip (15-50 psi); 100-120°F (38-49°C). Cold Water1/2" NPT CPVC Male Slip (15-50 psi); 40-60°F (4-16°C).Air1/2" NPT Brass (25-30 psi) (5-7 cfm)CUSTOMER IS RESPONSIBLE FOR COMPLIANCE WITH APPLICABLE LOCAL AND NATIONAL CODES AND REGULATIONS.*Add 2 (51) If Casters Are InstalledSide ViewRear ViewR E A R W A L L31 (787)33 (838)†35 (889)‡56 (1422)*58 (1473)‡† = 15 gal ‡ = 20 gal60 (1524)70 (1778)‡Dimensions are typical –drawing is not to scale.Request Equipment Drawings for Installation DetailsDimensions are inches (mm)For Further Information, contact:STERIS Corporation 5960 Heisley RoadMentor, OH 44060-1834 • USA 440-354-2600 • This document is intended for the exclusive use of STERIS Customers, including architects or designers. Reproduction in whole or in part by any party other than *Maximum tray size†Amp value is actual current drain. Disconnect should be at least 25% more. See Technical Data .TECHNICAL DATAMODELPOWER REQUIREMENTS(Amps)†SONIC POWER (Watts)SHIP WEIGHT FLUID CAPACITYHEAT LOSS (BTU)TRAY SIZE L x W x D*208 V 240 V 1 PH3 PH 1 PH CR2-01 LR 35.530.734.87501019 lb (462 kg)11 gal (42 L)160020 x 10-1/2 x 3-1/2"(508 x 267 x 89 mm)CR2-02 RL 35.530.734.87501019 lb (462 kg)11 gal (42 L)160020 x 10-1/2 x 3-1/2"(508 x 267 x 89 mm)CR2-15 LR 35.530.734.810001210 lb (549 kg)15 gal (57 L)172520 x 13-1/2 x 3-1/2"(508 x 343 x 89 mm)CR2-15 RL 35.530.734.810001210 lb (549 kg)15 gal (57 L)172520 x 13-1/2 x 3-1/2"(508 x 343 x 89 mm)CR2-20 LR 41.937.141.715001379 lb (626 kg)20 gal (76 L)210024 x 13-1/2 x 3-1/2"(610 x 343 x 89 mm)CR2-20 RL41.937.141.715001379 lb (626 kg)20 gal (76 L)210024 x 13-1/2 x 3-1/2"(610 x 343 x 89 mm)。
Vestil Manufacturing Co. PAL 系列货物拉杆说明书
PAL SPAL-12PAL-21PAL-LP PAL-16After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging and maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it sustained damage during transport. If damage is discovered during the inspection, immediately record a complete description of the damage on the bill of lading. If the product is undamaged, discard the packaging.Product specificationsThe standard GR-series system is NOT designed for installation on public streets or highways. [Guard rail systems that comply with Department of Transportation requirements are available as special orders.] Rail-mounting hardware is included with each post. Concrete anchor kits are sold separately.Dimensions and other product specifications appear in the following table:Model Description Pulling capacity Jaw heightJawopeningNet weight PAL-12 Single scissor 5,0002¾in. (~7cm) 7in.(~17.8cm) 14lb.(6.4kg) PAL-16 Single Scissor (heavy duty) 6,0002in. (~5cm) 5in.(~12.7cm) 16lb. (7.3kg) PAL-21 Double scissor 5,0002¾in. (~7cm) 3in.(~7.5cm) 25lb. (11.4kg) PAL-LP Double Scissor (low profile) 5,0002in. (~5cm) 3¼in.(~8.3cm)24lb. (10.9cm)Safety PrinciplesThis manual will acquaint persons authorized to install and/or maintain this guard rail with proper installation andmaintenance procedures. Therefore, each person involved in installing or maintaining the guard rail system should read andunderstand every instruction BEFOREHAND. Users should have access to the manual at all times and should routinely review the directions.This manual uses SIGNAL WORDS to classify personal injury risks and situations that might lead to property damage, as well as to draw attention to safety message(s). The reader must understand that each signal word indicates the seriousness of the identified hazard.Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS INJURY. Use of this signal word is limited to the most extreme situations.Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS INJURY.Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE injury.Identifies practices likely to result in product/property damage, such as assembly, installation, etc. that might unnecessarily damage the guard rail.Employers are responsible for training employees to use the product properly. If you do not understand an instruction, ask your supervisor or employer for assistance, because failure to follow the directions in this manual might result in serious personal injury or even death. Vestil is not liable for any injury or property damage that occurs as a consequence of failing to apply either: 1) the instructions in this manual; or 2) the information provided on labels affixed to the product (if applicable).Safety ConsiderationsMaterial handling is inherently dangerous. Improper use might result in death or serious personalinjury.∙ ONLY use to PULL pallets. DO NOT use as a below-the-hook lifting device. ∙ DO NOT exceed maximum rated load.∙ DO NOT use to pull top-heavy or unstable loads. ∙ DO NOT use to pull broken or damaged pallets. ∙ Pull ONLY 1 pallet at a time.Use Instructions:The operating instructions in this manual supplement the operation rules applied at your workplace. Safe use of this device is the operator’s responsibility.1. Engage the stringer (not the deck boards) of a pallet or skid with the jaws of the puller.2. Attach the chain or shackle to a fork truck and slowly drive the truck in reverse. As force is applied, the jawstightly grip the stringer.3. When the pallet is in position to be directly engaged by the forks of your lift truck, reverse directionmomentarily; then uncouple the puller from the fork truck. Open the jaws of the puller to release the pallet.Diagram of Components:The diagram below pairs names with parts. However, models PAL-12, PAL-21, and PAL-LP have a chain in place of the shackle. Model PAL-12 does not have link arms.Inspections and Maintenance:Regular inspections and maintenance are necessary to keep the puller in satisfactory operating condition.Inspections:DO NOT use the puller if it fails any part of the inspection described below.Inspect the puller before it is used for the first time. Thereafter, inspect the unit regularly, i.e. at least once per week. Inspect the following:1. Jaw arms and link arms: examine the arms for twisting, bending and warping regions. Pay particular attention to pivot points.2. Pins: check all pivot pins and the shackle pins for straightness. Each pin should be able to rotate freely.3. Shackle or chain: inspect for cracks, elongations and deformations.4. Grippers: confirm soundness of welds to the jaw arms.5. All components: check for excessive wear.Maintenance:1. Clean the puller periodically to preserve the paint.2. Lubricate all of the pivot points.Link armGripperJaw armShacklePivot pinShackle pinLabel placement diagramsPAL-12PAL-16PAL-21PAL-LPAAA BLabel A: Label B:LIMITED WARRANTYVestil Manufacturing Corporation (“Vestil”) warrants this product to be free of defects in material and workmanship during the warranty period. Our warranty obligation is to provide a replacement for a defective original part if the part is covered by the warranty, after we receive a proper request from the warrantee (you) for warranty service. Who may request service?Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.What is an “original part”?An original part is a part used to make the product as shipped to the warrantee.What is a “proper request”?A request for warranty service is proper if Vestil receives: 1) a photocopy of the Customer Invoice that displays the shipping date; AND 2) a written request for warranty service including your name and phone number. Send requests by any of the following methods:Mail Fax EmailVestil Manufacturing Corporation (260) 665-1339 ****************2999 North Wayne Street, PO Box 507 PhoneAngola, IN 46703 (260) 665-7586In the written request, list the parts believed to be defective and include the address where replacements should be delivered.What is covered under the warranty?After Vestil receives your request for warranty service, an authorized representative will contact you to determine whether your claim is covered by the warranty. Before providing warranty service, Vestil may require you to send the entire product, or just the defective part or parts, to its facility in Angola, IN. The warranty covers defects in the following original dynamic components: motors, hydraulic pumps, electronic controllers, switches and cylinders. It also covers defects in original parts that wear under normal usage conditions (“wearing parts”), such as bearings, hoses, wheels, seals, brushes, and batteries.How long is the warranty period?The warranty period for original components is 30 days. The warranty period begins on the date when Vestil ships the product to the warrantee. If the product was purchased from an authorized distributor, the period begins when the distributor ships the product. Vestil may extend the warranty period for products shipped from authorized distributors by up to 30 days to the duration necessary to account for shipping time.If a defective part is covered by the warranty, what will Vestil do to correct the problem?Vestil will provide an appropriate replacement for any covered part. An authorized representative of Vestil will contact you to discuss your claim.What is not covered by the warranty?1. Labor;2. Freight;3. Occurrence of any of the following, which automatically voids the warranty:∙ Product misuse;∙Negligent operation or repair;∙Corrosion or use in corrosive conditions;∙Inadequate or improper maintenance;∙Damage sustained during shipping;∙Accidents involving the product;∙Unauthorized modifications: DO NOT modify the product IN ANY WAY without first receiving written authorization from Vestil. Modification(s) might make the product unsafe to use ormight cause excessive and/or abnormal wear.Do any other warranties apply to the product?Vestil Manufacturing Corp. makes no other express warranties. All implied warranties are disclaimed to the extent allowed by law. Any implied warranty not disclaimed is limited in scope to the terms of this Limited Warranty.。
威购商城使用手册说明书
威购商城使用手册---供应商威购商城平台注册流程1. 供应商后台网址【】2. 在首页点击【注册】按钮阅读注册须知内容后：1.点击下载【管理员授权委托书】完整填写并保存（具体操作请翻页）；①2.勾选协议；3.点击注册。
②③授权委托书填写注意事项：1.本委托书说明性文字不得删除更改；2.所有空白处均为必填项；3.粘贴证件时建议先将身份证复印以后，剪下粘贴；4.红线框处必须都填写好，如果下载模板没有日期这一行，请手写上当天日期，日期非常重要！5.第一次注册时勾选 否。
进入个人信息模块：1.输入11位手机号；2.输入提示验证码；3.输入短信验证码；4.设置登录密码（按照提示规则填写）5.再次确认密码；以上内容填写完毕后点击立即注册。
进入企业信息模块：1.默认境内企业；2.填写执照上的企业名称全称；3.按照要求填写企业简称；4.四项注册材料均为必填项（授权委托书在注册时已经操作完成保存过，这一步直接上传使用），请完整上传；资料填写和上传完成后，点击 提交企业信息模块异常提示处理：1.显示已注册时，选择申请以目前填写名称申请加入企业（推荐）或者创建企业新组织；申请加入企业具体操作如下：a.点击申请加入企业---点击向平台方提交申请；b.上传准确填写的授权委托书，点击提交。
注册成功会收到短信通知。
以上流程完整准确填写后，会提示初次注册完成。
平台会在2~3工作日内个对资料进行审核，审核通过后，将通过手机短信告知您，您也可以使用手机号进行登录查询注册状态。
手机号登陆平台①进入工作台——②我的企业简历——③工商信息（用户维护）查看授权书是否审核通过，如果未通过请修改后重新上传。
审核未通过，点击此处重新上传①②③一、注册--查询审核结果④简历编辑打开之后，点击修改信息，按照提示重新修改相关内容以后再次上传。
一、注册--修改审核未通过信息⑤审核通过信息提示。
注意：企业用户的代码均为U开头威购商城平台密码找回及修改方式已注册网站忘记密码，用注册手机号找回：按照提示步骤填写即可密码和注册手机号都找不回：1.商城首页点击注册界面，进入后重新下载授权书按照要求完整填写。
特殊抓取器GSW-V商品说明书
Handling of gears in a milling centerSectional diagramCleaning UnitFor the exact size of the required accessories, availability of this size and the designation and ID, please refer to the additional views at the end of the size in question. You will find more detailed information on our accessory range in the “Accessories” catalog section.Perfectly adaptable to smooth surfaces, with dampening effect during attachment and The indicated times depend on the flow rate and pressure of the drive medium and the Workpiece weightThe recommended workpiece weight is calculated for a force-fit connection, indicated nominal flow rate and pressure as well as a safety factor of 2 against the weight of the acceleration of gravity g.Suction cup dimensionsDescription ID D H SSuction padSND 30-G1/4030913534 mm20 mm3 mmSND 80-G1/4030913689 mm40 mm7.6 mmSND 125-G1/40309137135 mm48 mm12.5 mmYou can find more detailed information and individual parts of the above-mentioned accessories in the “Accessories” catalog section.Suction cup dimensionsDescription ID D H SSuction padSND 30-G1/4030913534 mm20 mm3 mmSND 80-G1/4030913689 mm40 mm7.6 mmSND 125-G1/40309137135 mm48 mm12.5 mmYou can find more detailed information and individual parts of the above-mentioned accessories in the “Accessories” catalog section.Suction cup dimensionsDescription ID D H SSuction padSND 30-G1/4030913534 mm20 mm3 mmSND 80-G1/4030913689 mm40 mm7.6 mmSND 125-G1/40309137135 mm48 mm12.5 mmYou can find more detailed information and individual parts of the above-mentioned accessories in the “Accessories” catalog section.。
TTI亚洲产品手册说明书
商用元件Asia 产品手册TTI, Inc. – A Berkshire Hathaway Company | 如需联系您当地的销售团队，请致电+86 400-844-4868或发送电子邮件至**************************电子元器件分销专家在被动、连接器、机电和分立器件领域，TTI是你的首选。
我们有最广泛和最纵深的库存资源，在产品品质和及时交货方面声誉卓越。
3M CORPORATION ABRACONAIRBORN AMPHENOLAdvanced SensorsAerospaceAirLBAITCAldenAll SensorsANYTEKAororaAudioAustraliaCanadaCascoCommercialCONECConnexFCIFEPFiber OpticsGE M&C - NovaSensorHigh Speed ProductsIndustrialInfocomL TWMatrixNexus TechnologiesPCDRFSGX SensortechSINE SystemsSocapexSpectra-StripSSI TechnologiesSV MicrowaveTCSTFCThermometricsTimes MicrowaveTuchelWilcoxonAPI DELEVANAPI TECHNOLOGIESSpectrum Control APTIV (FORMALLY DELPHI)FCI AutomotiveHellermannTyton AVXATCElcoEthertronics BOURNSJW MillerKomatsuliteC&K COMPONENTSCORNELL DUBILIER (CDE)Illinois CapacitorEatonBussmannCoiltronicsPowerStorGLENAIRHARWINHONEYWELLClarostatElmwoodHobbsMICRO SWITCHSensotecITT CANNONJSTKEMETArcotronicsEvox RifaNEC-TOKINKNOWLESDielectric LaboratoriesJohanson ManufacturingNovacapSyferVoltronicsKOAKYOCERALELONLITTELFUSEConcord SemiconductorHamlinIXYSLittelfuse AutomotiveRaychem CPTeccorUS SensorWickmannZilogMOLEXAffinity MedicalBradFCTFlamarGWconnectNuCurrentOplinkPhillips-MedisizPro Tek MedicalSDP TelecomSensorconTemp-Flex Cable, Inc.TritonVasa Applied TechnologiesWoodheadMURATAMurata Power Solutions (MPS)C&D TechnologiesTOKOWirelessNICHICONOHMITEARCOLOMRONPANASONICPHOENIX CONTACTPKC GROUPPRECI-DIPPULSEROHM SEMICONDUCTORKionixLapis SemiconductorSENSATA TECHNOLOGIESAirpaxBEI SensorsCrydomKavlicoPressure & TemperatureSOURIAUTDKEPCOSTE CONNECTIVITYAgastatAlcoswitchAMP ConnectorsAMP NETCONNECTASTAUGATAxicomBuchananCIICitecCorcomDeutschElconEntrelecHartmanHirschmann MobilityHTSIntercontecKilovacKisslingMadison CableMeasurement SpecialtiesMeggitt Electronic ComponentsMicrodotNanonicsOEGPolamcoPotter & BrumfieldQ-Cee’sRaychem TubingSchrackTE Connectivity SensorsTT ELECTRONICSBI TechnologiesIRCOptekSemelabWelwynUNITED CHEMI-CONVISHAYAngstrohmAztronicBC ComponentsBeyschlagCentralCera-MiteDaleDraloricElectro-Films (EFI)ESTAGeneral SemiconductorHiRel SystemsHuntingtonMCB IndustrieMillsMilwaukeePolytechRoedersteinSferniceSiliconixSpectrolSpragueTansitorTechnoVitramonVISHAY FOIL RESISTORSVISHAY PRECISION GROUPWIMAYAGEOKemet - See KEMETPulse ElectronicsVitrohm电路保护和电磁元件●提供含铅及无铅兼容部件◆只提供无铅部件● 提供含铅及无铅兼容部件 ◆只提供无铅部件2.4/2.9/3.5/7mm BNC 、MMCX 、N 、SMA 、TNC■ MIL 规格分立器件(DSCC)■ MIL 规格分立器件(DSCC)电阻● 提供含铅及无铅兼容部件 ◆ 只提供无铅部件 ▲ 只提供含铅兼容部件见多识广的 产品专家更为纵深的 库存量AIM —高级库存管理平台卓越的品质与完善的保障TTI 的专有供应链系统是专门为管理IP&E 产品以及与优质制造商开展合作而设计的。
供应商(自填)基础风险资料表(2024年)
ContactEmail
2.供应商风险评估基本资料SupplierRiskAssessmentBasicData
2.1经营资质核实BusinessQualificationVerification
2
主要办公场所(须提供现场照片)PrimarilyWorkplace(On-sitephotosrequired)
A.第一主导。At1stplace
4
APP采购项目经营历史BusinessexperiencewithAPPinthisparticularprocurementcategory
A.超过10年Over10years
7
服务指标考核体系(服务质量,按时完成率)IsthereaformalServiceKPIsystem?(servicequality,on-timedelivery,etc.)
A.有良好的服务指标考核体系且记录完善(有三年以上记录)。Yes.TheSupplierhaswellestablishedserviceKPIsystemanddetailrecordforover3years.
8
处理客户投诉体系及书面记录.DoestheSupplierhaveaformalcustomercomplianthandlingframeworkandrecordinwritten?
B.介于40%~60%(40%~60%)
5
公司目前在银行是否有无担保信用贷款？Hasactivecredit/unsecureloaninBank?
B.否No
6
公司近二年来是否有向金融机构以外的人或组织贷款？Borrowingfromnon-financialinstituteinthepast2years?
杰威尔（Evogue）牙科设备包装清单说明书
Evogue Premium Dental Unit PackagesHV3370Q Swing package includes;Quolis 5000V ChairHV3370Q Swing L-R unitHV 3410SQ L-R Vac PackClesta 320XC-S LED lightHV3950 Contour J-box$29,335.00HV3500Q OTP package includes;Quolis 5000V ChairHV3100D unit with HV3100C Porcelain Cuspidor & Vac groupClesta 320XC-O LED light & light postHV3950 Contour J-box$28,995.00HV3500 X OTP packageBEL 50 ChairHV3100D OTP unit, with HV 3100C Cuspidor & Vac Clesta 320XC-O LED lightJB-004 Square J-box$26,030.00HV3270 X Swing packageBEL 50 ChairHV3270 X Swing UnitClesta 320XC-S LED lightHV3400SX swing Vac GroupJB-004 Square J-box$26,490.00Popular Evogue Package Options Upgrade to 920XC-O Bel Halo LED light $1360.00P701-2300-6 P.O. pack with 6 pin tubing $760.00EV-0021 Cavitron ultrasonic scaler kit $4895.00 EV-0052 Bien Air Optima MX2 electric motor $6485.00 QDU-USB Active USB 2.0 through unit arm $325.00 QDU-0011 additional HVE with 6’ tubing $180.00Quolis Series PackagesQDU -5871 Package includes;Quolis Q5000 chair QDU -5871 3HP swing unit Quolis 5110 Rear swing vac group AL920Q Bel Halo LED swing mount light35,195.00QDU -5371 Package includes;Quolis Q5000 chair QDU -5371 3HP swing unitQuolis 5170 Rear swing cuspidor and vacgroupAL920Q Bel Halo LED swing mount light$38,370.00Belmont X -Calibur PackagesBDS -2570 Package includes;Bel 50 chairBDS -2570 Swing unit HV -3400 Rear swing vac group 320X Clesta LED swing mount light$23,760.00BDS -2500 Over -the -Patient Package includes;Bel 50 chairBDS -2500 OTP delivery system with cuspidor and vac group320X Clesta LED over -the -patient light$23,255.00Quolis 5000 Dental Chairs Now with Neckrest or Q5000LM headrest as standardPlease specify on orderQ5000-V QSS-V Quolis 5000 chair in Vinyl with seamless sling back $12,150.00Q5000-V QSW-V Quolis 5000 chair in Vinyl with seamless wing back $12,150.00Q5000-UL QSS Quolis 5000 chair in Ultraleather with seamless sling back $13,085.00Q5000-UL QSW Quolis 5000 chair in Ultraleather with seamless wing back $13,085.00Q5000-UL QPS Quolis 5000 chair in Ultraleather with plush sling back $13,285.00Q5000-UL-QPW Quolis 5000 chair in Ultraleather with plush wing back $13,285.00(shown)For larger Q5000LM headrest please specify #PHDA-LMX-Calibur V Dental Chairs now with Quolis type headrest with matching rear plasticcoverBEL-50NSW-QH X-Calibur V chair with seamless wing back $9,300.00BEL-50NWP-QH X-Calibur V chair with plush wing back $9,300.00BEL-50NSS-QH X-Calibur V chair with seamless sling back $9,300.00BEL-50NSS-QH PEDO X-Calibur V chair seamless sling back NO LUMBAR $9,300.00Pro II Kneebreak dental chair & Denturists Package037-PHDA-QH Pro II 037 chair with dual axis QH headrest $12,825.00Pro II 037 Denturist Package, includes;Pro II chair, HV-3505DCL cuspidor & Clesta 320 XC-O LED light $23,370.00Takara Company Canada Ltd, 2076 South Sheridan, Mississauga, ON L5J 2M4, 905-822-2755, 800-268-5351, Prices in effect July 1 to Sept. 30/ 2018Disclaimer, Belmont is not responsible for pricing, typographical, or other errors and reserves the right to change and improve products without noticePhot -XII S Model 505 Intra oral x -ray $6,795.00Small 0.4mm x 0.4mm focal spot for the sharpest images New wall plate set up with multiple mounting options High frequency DC x -ray, reduces radiation60 or 70Kv, 3 or 6 mA, for digital sensors, or plates or film Programmable, self calibrating, ultra light tube -headRadiation dose display for sensor set up and patient informationNow with long cone included for sharper sensor images with less patient doseBel -Cypher Pro Panoramic X -ray system $45,695.00• Tomosynthesis image error correction capability• Motorized vertical drive • Small compact foot print • Simple operation • Laser positioning• New graphic interface• Panorama, bitewing and TMJ • New super resolution CMOS sensor• 5 year warrantyBel Halo LED Dental LightsAL -901R Bel Halo LED dental light, unit mount, white $4,535.00AL -902C Bel Halo LED dental light, ceiling mount, grey white $5,080.00 AL -905C Bel Halo LED dental light, track mount, grey white 8’, 8.5’, 9, 10’ ft height $6,055.00 AL -907C Bel Halo LED dental light, cabinet mount, grey white $5,405.00 AL -907A Bel Halo LED dental light, ADEC type cabinet mount, grey white $5,455.00 AL -908C Bel Halo LED dental light, wall mount, grey white $5,620.00 AL -920Q Bel Halo LED dental light, Quolis or Evogue swing mount, grey white $5,080.00 AL -920XC -S Bel Halo LED dental light, Evogue swing units, grey white $5,100.00 AL -920X Bel Halo LED dental light, X -Calibur mount, white $5,080.00 AL -920XC -O Bel Halo LED dental light, Evogue OTP units, grey white $5,215.00 Bel Halo Mirror, kit for Bel Halo lights with predrilled back cover$240.00Clesta LED Dental LightsAL -301C Clesta LED dental light, unit mount, white $3,140.00AL -302C Clesta LED dental light, ceiling mount, grey white $4,055.00 AL -305C Clesta LED dental light, track mount, grey white 8’, 8.5’, 9, 10’ ft height $5,190.00 AL -320X Clesta LED dental light, X -Calibur unit mount, white $3,740.00 AL -320XC -S Clesta LED dental light, Evogue swing mount, grey white $3,740.00 AL -320XC -O Clesta LED dental light, Evogue OTP units, grey white$3,965.00Exclusive Tomosynthesis mode can compensate for positioning errors, choosing the sharpest of 30 layers!。
Brevini WHLSeries电动螺纹赶轮赶车系列产品介绍说明书
WHL SeriesNew Brevini WHL winches are the ideal solution for hoisting applications: we satisfy all market needs.We have worked to design and produce a wide and complete product range: each unitis classified according to performance, hoisting capacity and motor types, always in compliance with international rules and regulations.Thanks to their Brevini planetary gear systems inside of the drum, the brakes and a wide range of hydraulic powered units with axial pistons or orbital and electric motors, these WHL winches are extremely versatile and practical. Easy installation and use, greatvalue for money and compact size are the main features of this new range of winches.1This new range of Winches, withthe reliable Brevini planetarygears inside, are the mostcompetitive solution in termsof compactness and flexibility.Brevini WHL winches areavailable with a variety of ratios,with line pull up to 8,000 Kg.Brevini planetary gearbox isinside the drum. The minimalspace required by the planetarygears makes it possible toproduce winches extremelycompact. The compactness and the flexibility with CE marking are the main features of the new WHL range. Every winch is a unit ready to install, so it provides a cost-effective solution in situations in which space is at a premium.Ideal for lifting and lowering loads of all kinds, these new Brevini hoisting winches are perfect for integration in mobile, marine and loading cranes, stationary crane systems, construction machinery and drilling rigs. They meet all the demands associated with these fields of application - reliably and accurately. This means greater flexibility, higher productivity and considerable time saving. Furthermore they have been designed to resist to aggressive weather conditions.Designing to exact safety requirements is central to product development, as is a commitmentto reliable performance and to the world’s environment. Based on a combination of innovative solutions, experienced engineers and use of best practice, our designs provide safe, efficientand cost competitive applications for every use.3Family sizeGearbox position214Drum configuration and rope diameter f015025045065WHLI Internal12345678----///Model code examplesWHL025-I/1,4/SD12-01/14/BRZV80_90 (StdDLA-MinDLB-BT298-) C5MH RAL9005_50Adaptor flange - motor position7090180270In case of:To be written Example Adaptor flange 611xxxxxxxx 130xxxx.../61101801480-...Universal inputE00.../E00-...MotorMotor type Displacement_positionBRZVAccessories8PRESSURE ROLLERNot present PPresentROPE Not present RPresentCONTROLSNot presentTL Torque limiter sensorEN EncoderEL Electric control system HLHydraulic Limit SwitchFor a motor with an integrated valve (example BRZV) it is possible to have frontal ports as an option.In this case the letter “F” identifies their frontal positionBRZV80_90FBRZV80_9012345678----///Crane type classification guide According to FEM section I, 3rd edition,Table T.2.1.3.5Type of craneType of dutyType of mechanism Hoisting Luffing Erection cranes M2 - M3M1 - M2Loading bridge cranesHook dutyM5 - M6-Grab or magnet duty M7 - M8-Workshop cranesM6-Overhead travelling cranes, pig-breaking cranes, scrapyard cranes Grab or magnet duty M8-Bridge cranes for unloading, bridge cranes for containersOther bridge cranes (with crab, and/or slewing jib)a) Hook or spreader duty b) Hook duty M6 - M7M4 - M5M3 - M4-Bridge cranes for unloading, bridge cranes (with crab, and/or slewing jib)Grab or magnet dutyM8M3 - M4Dry dock cranes, shipyard jib cranes, jib ceanes for dismantlingHook duty M5 - M6M4 - M5Dockside cranes (slewing, on ganty, etc.), floating cranes and pontoon derricks Hook dutyM6 - M7M5 - M6Grab or magnet dutyM7 - M8M6 - M7Floating cranes and pontoon derricks for very heavy loads (usually greater than 100 t)Hook duty M3 - M4M3 - M4Deck cranesHook dutyM4M3 - M4Grab or magnet duty M5 - M6Tower cranes for building M4M4DerricksM2 - M3M1 - M2Railway cranes allowed to run in a train M3 - M4M2 - M3Mobile cranesHook dutyM3 - M4M2 - M3CLASSES OF UTILIZATIONClasses of utilisation (Table T.2.1.3.4.)T2T3T4T5T6T7T8400 < T2 800800 < T3 16001600 < T4 32003200 < T5 63006300 < T6 1250012500 < T7 2500025000 < T8 50000L10 > Km 0,125M2M3M4M5M6M7L20,125 > Km 0,250M2M3M4M5M6M7M8L30,250 > Km 0,500M3M4M5M6M7M8L40,500 > Km 1000M4M5M6M7M8Table N°1Table N°2Mechanism GroupDrums Pulleys Compensating PulleysM 111,212,511,2M 212,51412,5M 3141612,5M 4161814M 5182014M 62022,416M 722,42516M 8252818Table N°3(3)Filling plug Oil level plug Drain plug7(3)Filling plug Oil level plug Drain plug(3)Filling plug Oil level plug Drain plug(3)Filling plug Oil level plug Drain plug(3)Filling plug Oil level plug Drain plug Electric motor not supplied as standard(3)Filling plug Oil level plug Drain plug(3)Filling plug Oil level plug Drain plug(3)Filling plug Oil level plug Drain plug(3)Filling plug Oil level plug Drain plug Electric motor not supplied as standard(3)Filling plug Oil level plug Drain plug(3)Filling plug Oil level plug Drain plug(3)Filling plug Oil level plug Drain plug(3)Filling plug Oil level plug Drain plug19(3)Filling plug Oil level plug Drain plug(3)Filling plug Oil level plug Drain plug21(3)Filling plug Oil level plug Drain plug(3)Filling plug Oil level plug Drain plug23(3)Filling plug Oil level plug Drain plugAccording to the needs of the customer, different motors are available.This means optimizing the performance related to motor displacements and type (orbital or axial piston or electric motor), reduction ratios and hydraulic system characteristics.All the winches can be supplied not only with our standard grooved drums,but also with other solutions in order to cover customer requests.On request, all the WHL winches can be supplied with a strain gauge system which reads the value of the output torque from the drum, according to the existing regulations.This system has been designed by Brevini Power Transmission in cooperation with BPE Electronics, specialist company (part of the Brevini Group) in theelectronicindustry.A wide range of high-performance ropes can be installed on all the WHL winches.The rope winding is made in accordance with the pre-load values in force.Use of the standard pressureroller is suggested for animproved rope winding control.Every minimum rope controller is equipped with a standard pressure rollerEvery minimum rope controller is equipped with a standard pressure roller(1) only as storageMinDLB MinDLA MinSLAMinSLBStdDLA StdDLB StdDLBStdSLAThe new and innovative system of pressure roller and rope winding control is highly flexible and ensures continuous pressure on the rope during the winding process.Pressure roller positioning is based on the drum rope exit.The pictures illustrate the possible assembly combinations, viewed from the motor side.To contain the spill side of the rope, the linear space between the flange end of the drum and the last rope layer must be equal or 1,5 times higher than the nominal rope diameter.(1)The values given in full drum cannot be reached during working conditions, but only during the transport and closing the application.>1,5 d<1,5 dThe winches are supplied closed with the right quantity of lubricant oil. Unless otherwise specified, the oil is the synthetic ISO VG 150, provided by SHELL.All of this to guarantee the highest quality and reliability and to maintain consistent performance over time, according to the most recent low environmental impact laws. The oil suitable temperature range is from -20°C to 40°C. For other conditions, please contact the Brevini Sales Dept.In order to avoid oil spills during transport, the winches are supplied without the breather plug. Nevertheless, it can be mounted bythe customer, who will be provided with an adequate kit to install the breather in the suitableposition for the condition of use of the machine.Brevini Power Transmission suggests possibly positioning the breather plug as shown in the highlighted positions, by adapting it to the specific application (customer’s machinery).][2bar prpi Ph +== housing pressure = inlet pressure = outlet pressurePh pi pr The use of a proper hydraulic oil is recommended as well as a filter not exceeding 10 microns. The drawings illustrate control systems to be purchased by the customer, unless otherwise presence of the oil in the motor before starting.BRZV motors don’t feature build-in check valves.The (Ph) pressure on the HPS seal is the average between inlet and outlet pressure.If Ph exceeds rated figures (see graph on side), the drain line must be connected.32Comparative table: Less is more!WHL015-I/0,7WHL015-I/1,0WHL025-I/1,1WHL025-I/1,4WHL025-I/1,4E.Motor versionWHL025-I/2,0WHL045-I/2,0E.Motor versionWHL025-I/1,9WHL025-I/2,0Double speedversionWHL045-I/3,0WHL045-I/3,5WHL045-I/3,5long versionWHL045-I/3,5double speedversionWHL045-I/3,5double speed and long versionWHL065-I/4,0double speedversionWHL065-I/4,0WHL065-I/6,0 double speed versionWHL065-I/6,0[Kg]80007000600050004000300020001000Former SeriesNew WHL SeriesBWF1000-I/0,9BWF1500-I/1,8BWF2000-I/2,0BWF2000-I/2,5BWF3000-I/2,8BWF3000-I/3,0BWF6000-I/3,8BWF6000-I/5,1BWF6000-I/6,1BWF6000-I/6,1long versionBWF3000-I/3,3Square frameBWF3000-I/3,3BWF2000-I/2,5Square frameBWF2000-I/2,0Hydr. pressure rollerBWF1500-I/1,9 Square frameBWF1500-I/1,9 Square frame long versionBWF1000-I/1,0BWF1000-I/1,0Hydr. pressure rollerEGO025-I/0,9BW LineBWF LineEGO LineEGO025-I/1,1EGO025-I/1,3EGO045-I/2,4EGO045-I/1,9EGO045-I/2,9EGO045-I/2,3EGO045-I/2,7EGO065-I/2,7EGO065-I/3,2EGO065-I/4,1EGO065-I/3,2Integ. motorEGO025-I/1,8EGO025-I/0,9Square frameEGO025-I/1,1 Square frame EGO025-I/1,3 Square frameEGO045-I/2,4 Square frameEGO045-I/1,9 Square frame EGO045-I/2,9 Square frameEGO045-I/2,3 Square frameEGO045-I/2,7 Square frameEGO065-I/2,7 Square frameEGO065-I/3,2 Square frameEGO065-I/4,1 Square frameEGO065-I/3,2 Square frame Integ. motorEGO025-I/1,8 Square frame BWF1000-I/1,1Long versionBWF1500-I/1,6BWF1500-I/1,5BWF1500-I/1,6Square frameEGO025-I/1,6EGO025-I/1,6integ. motorEGO025-I/1,6 Square frame EGO025-I/1,6 Square frame Integ. motorBWF6000-I/6,0ItalyBrevini Centrosud00012 - Guidonia Montecelio (Roma) - ITALY Tel.: +39 - 0774 - 365246www.brevinicentrosud.it Emilia Romagna and Marche40012 – Lippo di Calderara di Reno (BO) – ITALYTel.: +39 - 051 - 725436Lombardia24050 - Lurano (BG) - ITALYTel.: +39 - 035 - 800430www.brevinilombarda.itPiemonte10143 Torino (TO) – ITALY Tel.: +39 - 011 7492045 Sicilia91025 Marsala (TP) – ITALYTel.: +39 - 0923 - 719721Veneto45021 - Badia Polesine (RO) - ITALYTel.: +39 - 0425 - 53593www.breviniveneta.itEuropeBrevini AustriaA-4300 Gutenhofen - AUSTRIA Tel.: +43 7435 52823**************************Brevini Benelux2408 AB - Alphen aan de Rijn - NETHERLANDSTel.: +31 - 172 - 476464www.brevinipowertransmission.nlBrevini DanmarkDK-2690 – Karlslunde - DENMARKTel.: +45 - 4615 - 4500www.brevini.dkBrevini España 28350 – Madrid - SPAIN Tel.: +34 - 91 - 8015165 Brevini Finland02270 – Espoo - FINLANDTel.: +358-20-743 1828www.brevini.fiBrevini Power Transmission France69516 - Vaulx en Velin Cedex - FRANCETel.: +33-04-72-81-25-55www.brevini-france.frBrevini IrelandAllenwood, Naas, Co. Kildare - IRELAND Tel.: +353 - 45 - 890100www.brevini.ie Brevini Norge3255 – Larvik - NORWAYTel.: +47 - 3311 - 7100www.brevininorge.noBrevini PIV Drives61352 - Bad Homburg - GERMANYTel.: +49 (0)6172 102-0www.brevini.deBrevini Power Transmission Redüktör Istanbul - TürkiyeTel. +90 216 540 5909 Brevini Russia196233 Saint-Petersburg - RUSSIAtel +7 812 380 2162www.brevini-russia.ruBrevini Svenska60116 – Norrköping - SWEDENTel.: +46 - 11 - 4009000www.brevini.seBrevini U.K.WA1 1QX – Warrington - ENGLAND Tel.: +44 - 1925 - 636682 OverseasBrevini AustraliaGirraween, NSW, 2145 - AUSTRALIA Tel.: +61 - 2 - 88484000.au Brevini CanadaON M9W 5R8 – Toronto - CANADATel.: +1 - 416 - 6742591www.brevini.caBrevini China Shanghai Gearboxes200231 – Shanghai - CHINATel.: +86 - 21 - 64964351/2Brevini India400102 – Mumbai - INDIA Tel.: +91 - 22 - 26794262 Brevini Japan650-0047 – Kobe - JAPANTel.: +81 - 078 - 304 - 5377Brevini Korea1254 – Seoul - KOREATel.: +82 - 2 - 2065 - 9563/4/5www.brevinikorea.co.krBrevini Latino Americana13487-220 - Limeira - São Paulo - BRAZIL Tel.: +55 - 19 - 3446 8600.br Brevini De Mexico S.A.C.P. 76120 Querétaro - MEXICOTel.: +52 - 4422 - 100389Brevini New ZealandPO Box 58-418 - Greenmount AucklandNEW ZEALANDTel.: +64 - 9 - 2500050Brevini Power Transmission South Africa1504 - Apex Benoni Johannesburg – SOUTH AFRICA Tel.: +27 11 421 9949 Brevini South East Asia608780 SINGAPORETel.: +65 - 6356 - 8922.sgBrevini USA47396 Yorktown, Indiana - U.S.A.Tel.: +1 - (765) 759-2300DistributorsMPF410035 / 14 - 1Brevini Power Transmission S.p.A. 42124 Reggio Emilia - Italy -Via Luciano Brevini, 1Tel.+3905229281-Fax+************************************。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
VESSEL威威
批头D73 1x3x40
1500
VESSEL威威
批头D73 1x2.5x20x40
1440
VESSEL威威
批头D73 0x1.7x60
1260
VESSEL威威
125627 9900 0x150 +无感批
1146
VESSEL威威
批头2-75TX
1120
VESSEL威威
批头D73 00x1.5x60
6
VESSEL威威
360009 GT-NS10L气剪
6
VESSEL威威
气剪GT-NS20
6
VESSEL威威
批头D76 0x2.5x60
6
VESSEL威威
125621 9900 1.8x50 -无感批
6
VESSEL威威
125ቤተ መጻሕፍቲ ባይዱ53 220 6x150 -螺丝刀
6
VESSEL威威
静电测试仪EYE-02
6
7
VESSEL威威
批头B35 1x50X
7
VESSEL威威
螺丝刀920 2x25
6
VESSEL威威
845250 GT-3500GE用配件
6
VESSEL威威
845009
6
VESSEL威威
气枪AD-2 ON-PB
6
VESSEL威威
360576 NY15RAJ气剪头
6
VESSEL威威
360156 N20BFB气剪头
5
VESSEL威威
批头D73 0x2.5x40
5
VESSEL威威
621397 EPS-01G静电手腕带
5
VESSEL威威
521233 BPN-3气管接头
5
VESSEL威威
批头D73 1x3x30x60
5
VESSEL威威
336010 GT-1600VP冲击钻
5
VESSEL威威
360152 N20AJ气剪头
十字螺丝刀A16 2x4.5x65H
10
VESSEL
初级泵845381
10
VESSEL威威
批头B34 2X150X
10
VESSEL威威
螺丝刀506PS
10
VESSEL威威
GT-3500GE用配件845008
10
VESSEL威威
扳手A20 4.5X55
10
VESSEL威威
配件845036
10
VESSEL威威
六角批头B35 A/F 5x100G
10
VESSEL威威
六角批头A16 A/F 6x65G
10
VESSEL威威
批头NT8x100
10
VESSEL威威
批头D76 1x3x30x80
10
VESSEL威威
批头D76 T6x60
10
VESSEL威威
批头B34 2x100X
10
VESSEL威威
360587 NY25RAJ气剪头
1100
VESSEL威威
批头D73 0x1.4x20x40
1070
VESSEL威威
批头D73 0x2x20x40
910
VESSEL威威
批头D73 2x4x60
910
VESSEL威威
批头2-100TX
900
VESSEL威威
批头D73 00x1.5x40
890
VESSEL威威
批头D73 00x1.2x20x40
125362 220 5.5x150 -螺丝刀
12
VESSEL威威
125356 220 2x100 +螺丝刀
12
VESSEL威威
125372 220 1x150 +螺丝刀
12
VESSEL威威
121220 6300 2x200 +螺丝刀
12
VESSEL威威
121007 6100 0x75 +螺丝刀
12
10
VESSEL威威
360003 GT-N5气剪
10
VESSEL威威
批头B35 1x75H
10
VESSEL威威
121214 6300 5x200 -螺丝刀
10
VESSEL威威
121103 6200 2x38 +螺丝刀
10
VESSEL威威
122795 VDK-5 ""NEON""工具刀""
10
VESSEL威威
8
VESSEL威威
845072 GT-3500GE用配件
8
VESSEL威威
845267 GT-3500GE用配件
8
VESSEL威威
批头B43 2x75H
8
VESSEL威威
批头B35 3x75H
8
VESSEL威威
批头D73 2x4x40
8
VESSEL威威
360141 N12HS气剪头
8
VESSEL威威
批头D73 1x3x30x60
580
VESSEL威威
批头0-50TX
580
VESSEL威威
批头D73 00x2x40
540
VESSEL威威
批头D73 0x2x30x60
530
VESSEL威威
批头NT10x100
530
VESSEL威威
批头B36 2x100H
520
VESSEL威威
批头D76 1x3x60
330
VESSEL威威
批头D62 2x100xM6
300
VESSEL威威
手动起子头B35 +00x1.5x20x40 BIT
300
VESSEL威威
批头D76 1x5x60
290
VESSEL威威
批头B34 2x100H
260
VESSEL威威
批头JT10x100
260
VESSEL威威
批头2-50TX
260
106
VESSEL威威
141112 AD-2 100N气枪
103
VESSEL威威
批头JT20x75
100
VESSEL威威
批头B34 2x150H
100
VESSEL威威
批头5303/51 489271
100
VESSEL威威
批头B35 3x0.40x20x40
100
VESSEL威威
十字螺丝批GM142300
4
VESSEL威威
批头D73 0x3x20x60
4
VESSEL威威
批头D73 00x1.5x40
130
VESSEL威威
批头B35 2x75G
130
VESSEL威威
批头B43 2x300H
120
VESSEL威威
批头B34 A/F 3x70H
110
VESSEL威威
批咀D73 T4x40
110
VESSEL威威
125623 9900 3x100 -无感批
107
VESSEL威威
142011锤子头70x1/4
100
VESSEL威威
锤子头70X1
100
VESSEL威威
批头B36 1X70H
100
VESSEL威威
批头M-A16 2X4.5X150H
100
威威VESSEL
离子风机F-120R/F120-R
93
VESSEL威威
批头D73 0x3x20x60
90
VESSEL威威
142005 70x2塑料锤子
12
VESSEL威威
VESSEL威威
气动起子DB32075
5
VESSEL威威
螺丝刀4100 A/F7X125
5
VESSEL威威
GT-3500GE用配件845320
5
VESSEL威威
331221 GT-S650冲击钻
5
VESSEL威威
311106 GT-S6MLR气动螺丝刀
5
VESSEL威威
141073 WB-003刀片3000C
430
VESSEL威威
141012 3500E-2剥线钳
405
VESSEL威威
批头A14 2x200G
400
VESSEL威威
批头D73 0x2x20x60
370
VESSEL威威
批头D73 00x1.7x20x40
360
VESSEL威威
批头D73 0x1.5x20x40
340
VESSEL威威
批头1-50TX
六角批头B35 A/F 3x75H
200
VESSEL威威
批头B43 2x75G
200
VESSEL威威
125650 9000 0.9x30 -无感批
196
VESSEL威威
批头A16 A/F 4X65H
190
VESSEL威威
142014锤子头70x1-1/2
186
VESSEL威威
批头2-150TX
180
日本VESSEL威威到库新品，D76系列批头，D73系列批头，批咀，vessel螺丝刀等vessel工具，杉本贸易库存，年中热销特卖
VESSEL威威
批咀BW-13
4090
VESSEL威威
批头B43 2x100H
2090
VESSEL威威
批头61072