【尚友制造】Chicago Booth

合集下载

KITZ CORPORATION OF AMERICA DJ Series Butterfly Va

BFV-100-0703 DJ Series Butterfly ValvesKITZ CORPORATION OF AMERICAw w wWELCOME TO OUR WEB SITE!VISIT THE KITZ WEB SITE FOR IMPORTANT INFORMATION:• KITZ Corporate Background - Since 1951!• Product Specifics• Contact Information (worldwide)• Customer Access (MTR printout, etc.)• Technical Data/Catalogs and much more...10750 CORPORATE DRIVE • STAFFORD, TEXAS®10750 CORPORATE DRIVE • STAFFORD, TEXAS BFV-1®A PRODUCT OF TECHNOLOGY®6122E L 200SF12345678LEVER LEVER 5112BL 5112EL 5112VL 6112BL 6112EL 6112VL 5122BL 5122EL 5122VL 6122BL 6122EL 6122VL 5132BL 5132EL 5132VL 6132BL 6132EL 6132VL GEAR GEAR 5112BG 5112EG 5112VG 6112BG 6112EG 6112VG 5122BG 5122EG 5122VG 6122BG 6122EG 6122VG 5132BG5132EG5132VG6132BG6132EG6132VG200 PSI - WAFERSIZES 2″- 12″200 PSI -LUGSIZES 2″- 12″GEAR GEAR 5111BG 5111EG 5111VG 6111BG 6111EG 6111VG 5121BG 5121EG 5121VG 6121BG 6121EG 6121VG 5141BG5141EG5141VG6141BG6141EG6141VG150 PSI - WAFERSIZES 14″- 24″150 PSI -LUGSIZES 14″- 24″{{{{{{{{10750 CORPORATE DRIVE • STAFFORD, TEXASBFV-2®GENERAL TERMS AND CONDITIONSACCEPTANCEAll quotations are for acceptance within 30 days from date of quota-tion unless extended in writing. In the event a purchase order is placed after this time, the Seller’s company reserves the right to requote prices of all valves offered. All orders and contracts are subject to credit approval and acceptance by KITZ.FREIGHTAll materials will be shipped F.O.B.point of shipment – no freight allowance unless otherwise stated and agreed upon with the Buyer.PRICESThere will be added to all prices quoted any sales, excise, or similar tax which Seller may be required to collect on or in connection with the sale. Seller reserves the right to can-cel any order in the event that selling prices shall be established by Federal, State or other governmental regulation with respect to the prod-ucts covered by the order which shall be lower than the prices specified in the order.ESCALATION TERMSPrices shown in this price schedule reflect the costs in effect at the time of publication. These prices will remain firm on all products with a quoted delivery of twenty six (26)weeks or less. On products with a quoted delivery of more than 26weeks, the Seller has a right to price and invoice at the applicable price sheet in effect at the time of ship-ment. In no event will the invoiced price be less than price originally quoted.DEFERRED SHIPMENTSIf for any reason the Buyer desires to delay shipments more than 30 days after manufacturing or to place a hold or to stop the order during the manufacturing cycle, the Seller’s company reserves the right to con-sider the order cancelled and to invoke cancellation charges.CREDIT TERMSAs quoted. Overdue balances will be subject to 1.5% service charge per month on such indebtedness.DELIVERIESShipments made to the Buyer shall at all times be subject to the approval of Seller’s Credit Department. All schedules of shipments are estimated as closely as possible and Seller will use its best effort to ship within the time schedule but does not guarantee to do so. Seller shall not be liable for any direct, indirect, or consequential damage or loss caused by delay in delivery, regardless of the cause of delay. Items offered from stock are subject to prior sale.RETURNSNo returns are allowed without prior arrangements made with the Seller.Product considered for return must be in new, resalable condition and of current design.WARRANTYSeller will replace without charge or refund the purchase price of products manufactured by Seller which prove to be defective in material or work-manship, provided in each case that the product is properly installed and is used in the service for which Seller recommends it and that written claim, specifying the alleged defect,is presented to the Seller within one year from the date of shipment.Seller shall in no event be responsi-ble for claims of A) labor, expenses,or other damages occasioned by defective parts or products or for B)consequential or secondary damages.The Warranty stated in this para-graph is in lieu of all other war-ranties, either expressed or implied. With respect to war-ranties, this paragraph states Buyer’s exclusive remedy and Seller’s exclusive liability.DESIGNBecause of a policy of continuous product improvement, Seller reserves the right to change design,materials or specifications without notice. There will be a charge for modifying an order after it has been entered when such change or modifi-cation results in additional engineer-ing or clerical work for either KITZ or its suppliers.NOTEKITZ reserves the right to correct any obvious clerical errors in quo-tations, invoices and other contracts.200 PSI LUGDuctile Iron Body • Extended NeckDISC:DI • AB • 316SS LINER: NBR • EPDM • FKMSIZE: 2″- 8″Code # 6112(B/E/V)(L/G)Code # 6122(B/E/V)(L/G)Code # 6132(B/E/V)(L/G)200 PSI LUGDuctile Iron Body • Extended NeckDISC:DI • AB • 316SS LINER: NBR • EPDM • FKMSIZE: 10″- 12″Code # 6112(B/E/V)G Code # 6122(B/E/V)G Code # 6132(B/E/V)G 150 PSI LUGDuctile Iron Body • Extended NeckDISC:DI • AB • 316SS LINER: NBR • EPDM • FKMSIZE: 14″- 24″Code # 6111(B/E/V)G Code # 6121(B/E/V)G Code # 6141(B/E/V)G150 PSI WAFERDuctile Iron Body • Extended NeckDISC:DI • AB • 316SS LINER: NBR • EPDM • FKMSIZE: 14″- 24″Code # 5111(B/E/V)G Code # 5121(B/E/V)G Code # 5141(B/E/V)G 200 PSI WAFERDuctile Iron Body • Extended NeckDISC:DI • AB • 316SS LINER: NBR • EPDM • FKMSIZE: 10″- 12″Code # 5112(B/E/V)G Code # 5122(B/E/V)G Code # 5132(B/E/V)G GATE CLASS 125 BRONZE Screw-In Bonnet • Non-Rising StemSolid Wedge Disc10750 CORPORATE DRIVE • STAFFORD, TEXAS BFV-3®DJ SERIES BUTTERFLY V ALVES ILLUSTRATED INDEX NUMERICALINDEXCODE #PAGE 2~8″5112 ...................BFV-5-65122 ...................BFV-5-65132 ...................BFV-5-66112....................BFV-5-66122....................BFV-5-66132....................BFV-5-610~12″5112 .......................BFV-75122 .......................BFV-75132 .......................BFV-76112........................BFV-76122........................BFV-76132........................BFV-714~24″5111 .......................BFV-95121 .......................BFV-95141 .......................BFV-96111........................BFV-96121........................BFV-96141........................BFV-9200 PSI WAFERDuctile Iron Body • Extended NeckDISC:DI • AB • 316SS LINER: NBR • EPDM • FKMSIZE: 2″- 8″Code # 5112(B/E/V)(L/G)Code # 5122(B/E/V)(L/G)Code # 5132(B/E/V)(L/G)DJ SERIES BUTTERFLY V ALVES - ILLUSTRATED INDEXCode # 5112 (B/E/V)L Disc: Ductile Iron (A538 +Code # 5112 (B/E/V)G Code # 6112 (B/E/V)GDisc: Ductile Iron (A538 + Code # 6122 (B/E/V)GCode # 5112 (B/E/V)G Code # 6112 (B/E/V)G10750 CORPORATE DRIVE • STAFFORD, TEXASBFV-10®A PRODUCT OF TECHNOLOGYSpecifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-11Metal Used in the Manufacture of Valvesand Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-12Properties of Valve Material . . . . . . . . . . . . . . . . . . . . .BFV-13Resilient Liner Materials . . . . . . . . . . . . . . . . . . . . . . . .BFV-14Chemical Resistance Chart . . . . . . . . . . . . . . . . . . . . . .BFV-15Flow Data - Cv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-16Storage/Handling and Installation Guide . . . . . . . . . . .BFV-17Flange Bolt Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-18Ductile Series Butterfly - Exploded View . . . . . . . . . . .BFV-19Locking Lever Data . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-20Gear Operator Data . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-21Bare Stem Dimensional Datafor Actuation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-22Torque Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-23Cross Reference Chart . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-24®BAHex Head Bolt BoltCStud10750 CORPORATE DRIVE • STAFFORD, TEXASBFV-25®Plumbing ValvesKITZ CORPORATION OF AMERICA BIV-100-00BV-100-0701K-203-08K-204-08K-201-08P-100-1102K-170-06K-150-06KCCGP 0900ITBV0031100ISO 9001 Certified since 1989KITZ CORPORATION OF AMERICA10750 CORPORATE DRIVE • STAFFORD, TEXAS 77477 U.S.A.PHONE (281)491-7333 • TOLL FREE (800)772-0073 • FACSIMILE (281)491-9402Visit our web site at: — Distributed by —CAUTION Pressure-temperature ratings and other performance data publishedin this catalog have been developed from our design calculation, in-house testing , field reports provided by our customers and/or pub-lished official standards or specifications. They are good only to cover typical applications as a general guideline to users of KITZ products introduced in this catalog.For any specific application, users are kindly requested to contact KITZ Corporation for technical advice, or to carry out their own study and evaluation for proving suitability of these products to such an application. Failure to follow this request could result in property damage and/or personal injury, for which we shall not be liable.While this catalog has been compiled with the utmost care, we assume no responsibility for errors, impropriety or inadequacy. Any information provided in this catalog is subject to change without notice for error rectification, product discontinuation, design modifi-cation, new product introduction or any other cause that KITZ Corporation considers necessary. This edition cancels all previous issues.®U!。

布恩商业用品部分部件目录说明书

JDF-2S/N 0005473 & UPILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice.BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227SPRINGFIELD, ILLINOIS 62708-3227PHONE: (217) 529-6601 FAX: (217) 529-664438311.0000E 03/08 ©2005 Bunn-O-Matic Corporation DISCONTINUED VERSION Parts listed in this catalog may no longer be available.BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTYBunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:1) All equipment other than as specified below: 2 years parts and 1 year labor.2) Electronic circuit and/or control boards: parts and labor for 3 years.3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.BrewWISE, BUNN Gourmet Ice, BUNN Pour-O-Matic, BUNN, Bunn-OMatic, Bunn-O-Matic, BUNNlink, BUNNserve, BUNN Espress, DBC, Dr. Brew, Dual, EasyClear, EasyGard, Easy Pour, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, IMIX, Infusion Series, Legendary for Quality, The Mark of Quality in Beverage Equipment Worldwide, My Café, Power-Logic, Safety-Fresh, Scale-Pro, Single, Smart Funnel, Smart Hopper, Soft Heat, SplashGard, System III, ThermoFresh, 392, AXIOM, Beverage Profit Calculator, Beverage Bar Creator, BrewLOGIC, BrewMETER, BrewWIZARD, BUNNSERVE, BUNNsource, Coffee At Its Best, Cool Froth, Digital Brewer Control, Intellisteam, Nothing Brews Like a BUNN, Pouring Profits, Pulse Wave, Quality Beverage Equipment Worldwide, Signature Series, Silver Series, Smart Heat, SmartWAVE, Tea At Its Best, The Horizontal Red Line, Titan, Ultra, are either trademarks or registered trademarks of Bunn-O-Matic Corporation.238311 020608TABLE OF CONTENTSMain Frame & Covers (4)Upper Cabinet & Panels (6)Refrigeration Components (8)Compressor Components (10)Fan Assembly (12)Water Tank Assy (14)Circulation Pump & Lines (18)Product Coil & Lines (20)Dispense Platform Assy (22)Dispense Valve Assy (24)Plain Water Manifold (Early Models) (26)Plain Water Manifold (Late Models) (28)Rinse Water Manifold & Solenoid (Early Models) (30)Rinse Water Manifold & Solenoid (Late Models) (34)Pump Assy (38)Bottle Adapter Assy (40)Door Assy (42)Electrical Components (46)Refillable Container Assy (50)Numerical Index (52)338311 111706438311 050807ITEM PART NO. QTY. DESCRIPTION5* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.MAIN FRAME & COVERS1 34409.0000 1 Base Frame Assy2 26528.0000 4 Leg 03996.0000 4 Pad, Non-skid3 34410.0000 1 Frame, Refridgeration - - - - - - - -4 Screw #10-32 x4 39428.0000* 2Bracket, Rear support (Late models with Water Inlet Valve)34797.0000* 2 Bracket, Rear support (Early models prior to Water Inlet Valve) 02332.0001 8 Screw, Crimptite #6 x .25"5 38469.0001* 1 Bracket, Upper Frame6 36192.1000 1 Panel w/Decals, Right (Includes item 11) 02332.0001 3 Screw, Crimptite #6 x .25"7 34786.1000 1 Panel w/Decals, Top (Includes item 8) 02332.0001 4 Screw, Crimptite #6 x .25"8 33458.0000 1 Decal, Refridgeration ON - OFF9 36191.1000 1 Panel w/Decals, Left (Includes items 10, 11, 12 & 24) 02332.0001 3 Screw, Crimptite #6 x .25"10 33461.0001 1 Decal, Refridgerant Charge11 27442.0000 2 Decal, Warning - Moving Parts12 00986.0002 1 Decal, Warning - Electrical13 39561.0001 1 Panel, Rear 02332.0001 4 Screw, Crimptite #6 x .25"14 33645.0000 1 Decal, Main Water Connection15 33646.0000 1 Decal, Rinse Water Connection (Early Models)16 00656.0000 1 Decal, Comply To Plumbing Code17 27354.0000 4 Bushing18 00668.0000 3 Plug19 35998.0001 1 Panel, Splash 01317.0003 2 Screw, Truss Head, Locking #8-32 x .38"20 21436.0000 2 Catch, Magnetic21 33538.0000*1 Bracket, Right33539.0000* 1 Bracket, Left 01311.0001 4 Screw, Truss Head, Locking #8-32 x .25"22 38765.1000 1 Drip Tray Assy (Includes strike plate and item 23)23 26801.0000 1 Grate, Drip Tray24 35277.0000 1 Schematic, Electrical38311 121207638311 111706ITEM PART NO. QTY. DESCRIPTION7* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.UPPER CABINET & PANELS1 35478.0000* 1 Cabinet (Not serviced) 24544.0000 10 Screw, Pan Head #8-182 34738.0000 1 Plate, Cabinet Mounting 01311.0001 4 Screw, Truss Head #8-32 x .25" Lkg.3 34784.0000 1 Plate, Bottom Closure 01359.0000 3 Screw, Flat Head #8-32 x .38"4 34362.0000 1 Bushing, Lower Hinge5 34790.0000 1 Wrap 01311.0001 4 Screw, Truss Head #8-32 x .25" Lkg.6 34785.0000* 1 Bracket, Hinge 01327.0000 3 Screw, Pan Head #10 -32 x .38"7 34666.0001 1 Catch, Door Latch 01382.0000 2 Screw, Truss Head #6 x .375"8 27394.0000 2 Plug9 00669.0002 4 Plug10 34419.0000 1 Coil, Water 24544.0000 4 Screw, Pan Head #8-1811 27246.0000 1 Sensor Assy, Temperature12 33669.0000 1 Clip, Adhesive Back13 33297.0000 1 Fan Assy. 03290.0000 1 Cable Tie 38616.0000 4 Screw, Pan Head #8-1814 34421.0000* 1 Cover, Fan 24544.0000 4 Screw, Hex Head w/Washer #10-2415 34422.1000 1 Shelf, Product (Includes items 16 & 17)16 33459.0003 2 Decal, Dispense/Rinse17 32461.0000 2 Gasket, Drip18 32455.0000 2 Knob19 27394.0000 2 Plug20 35930.0000 2 Nozzle21 32848.0000 2 O-ring22 35108.1000 2 Mixer, Spiral23 38519.0000 1 Decal, Dispense Ratio24 M2568.1000 - Grease, USDA H-1 (Use when assembling items 21 & 22)38311 121207838311 062905ITEM PART NO. QTY. DESCRIPTION9* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 1 35164.1000 1 Air Filter2 29951.0001 1 Condenser 02335.0001 4 Screw, Crimptite #8 x .38"3 35180.0001 1 Tube (Requires brazing to install) (Not serviced)4 35386.0001 1 Tube (Requires brazing to install) (Not serviced)5 00396.0002 1 Tee (Requires brazing to install) (Not serviced)6 35385.0001 1 Tube (Requires brazing to install) (Not serviced)7 35580.0001 1 Tube (Requires brazing to install) (Not serviced)8 35175.1000 1 Filter Dryer Assy (Requires brazing to install)9 35179.0001 1 Tube (Requires brazing to install) (Not serviced)10 32776.0000 1 Accumulator11 35581.0001 1 Tube (Requires brazing to install) (Not serviced)12 - - - - - - - - 1 Compressor (See COMPRESSOR COMPONENTS) 34529.0000* 4 Washer 00901.0000 4 Nut .25"-2013 - - - - - - - - 4 Grommet14 - - - - - - - - 4 Sleeve 15 33536.0000 1 Platform 01317.0003 4 Screw, Truss Head, Locking #8-32 x .38"16 - - - - - - - - 1 Fan Assy (See FAN ASSEMBLY) 27243.0000 3 Screw #8-36 x .437"17 34418.0000* 1 Bracket 01317.0003 4 Screw, Truss Head, Locking #8-32 x .38"18 28567.0000 1 Mounting Kit (Includes four each of items 13 & 14)19 M2332.1000 - Insulation, Tube 25/50 - 1.6"ID x .50" wall x 6.0 Ft (Use as required) 20 M2336.1000 - Insulation, Tube 25/50 - 0.25"ID x .19" wall x 6.0 Ft (Use as required)REFRIGERATION COMPONENTSOrder item 1838311 0303081038311 111706ITEMPART NO.QTY.DESCRIPTION11* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.COMPRESSOR COMPONENTS- 38231.1000 1 Compressor 120V (Includes items 1 - 5) 33522.1001 1 Compressor 230V (Includes items 1 - 5) 1 38897.0000 1 Relay, Compressor 120V 38897.0001 1 Relay, Compressor 230V 2 38917.0000 1 Overload Protector 3 38916.0000 1 Retainer 4 38918.0000 1 Clip 538896.00001Cover38311 1117061238311 062905ITEMPART NO.QTY.DESCRIPTION13* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.FAN ASSEMBLY- 32204.1001 1 Fan Assy 120V (Includes items 1-4) 32204.1002 1 Fan Assy 230V (Includes items 1-4) 1 33603.0000 1 Motor Assy 120V 33603.0001 1 Motor Assy 230V 2 33602.0000 1 Blade, Fan 3 27258.0000 1 Silencer 423700.00001Nut .25"-2038311 0629051438311 111706ITEMPART NO.QTY.DESCRIPTION15* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.WATER TANK ASSY1 35165.0000 1 Tank Assy - - - - - - - - 4 Screw2 35272.1001 1 Lid Assy 24544.0000 6 Screw, Pan Head #8-183 35526.0000* 2 Bracket 02332.0001 2 Screw, Crimptite #6 x .25" 01317.0003 2 Screw, Truss Head, Locking #8-32 x .38"4 34403.1001 1 Panel Assy 00973.0000 4 Nut, Keps #6-325 33801.0000 1 Grommet6 29327.0000 1 Probe, Temperature & Dry Plug7 33801.0002 1 Grommet 7 02536.0000 1 Grommet9 02645.1000 1 Probe, Liquid Level 01522.0000 1 Washer 20203.0100 1 Lockwasher, Internal-tooth #800908.0000 1 Nut #8-32 10 21275.0004 3 Clamp .54" - .64"11 20976.0062* 1 Tube, Silicone .38" ID x 1.75" (Order item 35) 1221275.0005 1 Clamp .62" - .73" 120V 21275.0009 1 Clamp .65" - .78" 230V 13 35077.0000 1 Tee .38" Sngl. Barb 14 21275.0003 4 Clamp .57" - .70"15 34325.0003* 1 Hose, Flex .38" ID x .625" OD x 3.0" (Order item 36) 16 33623.0000 2 Elbow .38" Barb17 34325.0006* 1 Hose, Flex .38" ID x .625" OD x 2.25" (Order item 36) 18 20976.0016* 1 Tube, Silicone .38" ID x 2.75" (Order item 35) 19 33068.0000 1 Fitting .38" Barb x .25" Barb20 37809.1000 1 Pump Assy 120V (Includes items 11 - 19) 37265.0000 1 Pump Assy 230V 21 35132.0000* 1 Product Coil22 34416.0000 2 Spacer 00973.0000 4 Nut, Keps #6-32 23 03290.0000 2 Cable Tie 2432734.00016Cable Tie, 28.0"(Continued)38311 0508071638311 111706ITEMPART NO.QTY.DESCRIPTION17* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.WATER TANK ASSY25 33533.0000* 4 Spacer 26 33519.0000* 1 Evaporator Coil 27 36448.0000 2 Spacer 28 03290.0000 2 Cable Tie29 33670.0004* 1 Tube, Clear .25" x 8.0" (Not serviced) 30 38605.0000 1 Tee31 21275.0006 1 Clamp .40" - .50" 32 35174.0000 1 Fitting 33 33149.0000 1 Gasket 34 00976.0000 1 Cap35 35106.0000 1 Manifold, Return Water36 20976.1000 1 Tube, Silicone .38" ID x 12.0" (Cut to required length) 20976.1001 1 Tube, Silicone .38" ID x 36.0" (Cut to required length) 20976.1002 1 Tube, Silicone .38" ID x 120.0" (Cut to required length) 37 34325.1000 1 Hose, Flex .38" ID x .625" OD x 12.0" (Cut to required length) 34325.1001 1 Hose, Flex .38" ID x .625" OD x 36.0" (Cut to required length)34325.10021Hose, Flex .38" ID x .625" OD x 120.0" (Cut to required length)38311 1117061838311 062905ITEMPART NO.QTY.DESCRIPTION19* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.1 - - - - - - - - 1 Coil, Upper Cabinet (See UPPER CABINET & PANELS)2 34325.0004* 2 Tube, Silicone .38" ID x 1.5" (Order item 10)3 21275.0003 8 Clamp .57" - .70"4 37850.0000 2 Elbow .38" Barb5 34325.0010* 1 Tube, Silicone .38" ID x 17.0" (Order item 10)6 34325.0021* 1 Tube, Silicone .38" ID x 8.0" (Order item 10)7 35173.0001 1 Fitting .312" Fl x .375" Barb8 35305.0000 1 Gasket9 - - - - - - - - 1 Manifold, Return Water (See WATER TANK ASSEMBLY) 10 34325.1000 - Tube, Silicone .38" ID x 12.0" (Cut to required length) 34325.1001 - Tube, Silicone .38" ID x 36.0" (Cut to required length) 34325.1002 - Tube, Silicone .38" ID x 120.0" (Cut to required length) 11M2337.1000-Tube Insulation (Cut to required length)CIRCULATION PUMP & LINES38311 1117062038311 111706ITEMPART NO.QTY.DESCRIPTION21* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.PRODUCT COIL & LINES1 - - - - - - - - 1 Product Coil (See WATER TANK ASSEMBLY)2 35305.0000 2 Gasket3 35173.0001 1 Fitting .312" Fl x .375" Barb4 21275.0003 8 Clamp .57" - .70"5 34325.0010* 1 Hose, Flex .38" ID x 17.0" (Order item 19)(Early models prior to Water Inlet Valve) 34325.0014* 1 Hose, Flex .38" ID x 15.0" (Order item 19)(Late models with Water Inlet Valve)6 33151.0004 1 Fitting, Elbow .38" Barb7 33149.0000 1 Gasket8 12757.0000 1 Nut9 01514.0000 1 Lockwasher 10 12756.0000 1 Fitting, Bulkhead11 35172.0001 1 Fitting, Elbow .312" Fl x .375" Barb 12 34325.0004* 1 Hose, Flex .38" ID x 1.5" (Order item 19) 13 37850.0000 1 Elbow .38" Barb14 34325.0012* 1 Hose, Flex .38" ID x 10.5" (Order item 19) 15 35171.0000 1 Valve, Shut Off 16 34540.0000 1 Decal, Caution - Close17 34325.0004* 1 Hose, Flex .38" ID x 1.5" (Order item 19) 18 34462.0000 1 Coupling, Quick Disconnect, Male19 34325.1000 1 Hose, Flex .38" ID x 12.0" (Cut to required length) 34325.1001 1 Hose, Flex .38" ID x 36.0" (Cut to required length) 34325.1002 1 Hose, Flex .38" ID x 120.0" (Cut to required length)20M2337.1000-Insulation, Tube 25/50 - 0.5"ID x .19" wall x 6.0 Ft (Use as required)38311 111706Early Models2238311 110107ITEMPART NO.QTY.DESCRIPTION23* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.DISPENSE PLATFORM ASSEMBLY1 38116.1000 1 Platform Assy (Includes items2 - 18) 2 - - - - - - - - 2 Pump Assy (See PUMP ASSY) 01338.0000 2 Screw, Truss Head #8-32 x .625" 01522.0000 4 Washer00991.0000 4 Nut, Elastic Lock #8-32 3 32957.0001 8 Bushing, Rubber 4 21275.0006 4 Clamp .40" - .50"5 38018.1000 2 Dispense Valve (See DISPENSE VALVE) 01308.0000 4 Screw, Truss Head #6-32 x 25"6 37786.0001 2 Plate 01308.0000 2Screw, Truss Head #6-32 x 25"7 - - - - - - - - 1 Manifold, Plain Water (See PLAIN WATER MANIFOLD) 8 - - - - - - - - 1 Manifold, Rinse Water (See RINSE WATER MANIFOLD) 9 32756.1000 2 Bottle Adapter (See BOTTLE ADAPTER) 01308.0000 4 Screw, Truss Head #6-32 x 25" 10 38122.0000* 1 Plate 01311.0001 4Screw, Truss Head #8-32 x .25" Lkg.11 32458.0000 2 Clip, Retainer 12 38104.0000 2 Thumbscrew 13 32454.0000 2 Fitting 1434087.00002O-ringThe following items are not illustrated 15 35189.0000 1 Harness, Dispense Platform 16 35181.0001 1 Harness, Dispense Valve 17 - - - - - - - - 4 Cable Tie (Not serviced) 1812422.00002Clamp38311 1101072438311 062905ITEMPART NO.QTY.DESCRIPTION25* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.DISPENSE VALVE ASSEMBLY- 38018.1000 1 Dispense Valve Assy (Includes items 1 - 24) 1 37801.0001 1 Body 2 37990.0000 1 Seal 3 37843.0000 1 Nozzle, Water4 32252.0000 1 Valve, Solenoid (Includes items5 - 10) 5 33554.0000 1 Solenoid Valve Coil6 28481.0000 1 Guide Kit (Includes Guide, Washer and O-ring)7 33585.0000 1 Solenoid Valve Base Kit (Includes O-ring and items 6 & 7) 8 01111.0002 1 Solenoid Valve Repair Kit (Includes Plunger, Spring and O-ring) 9 33580.0000 1 O-ring 10 33553.0000 1 O-ring11 37987.0000 1 Bracket 01308.0000 2 Screw #6-32 x .25" 12 32463.0000 1 Fitting, Elbow13 32849.0001 1 O-ring (Also use item 24) 14 37853.0000 1 Clamp 01308.0000 1 Screw #6-32 x .25" 15 32603.0000 1 Sleeve16 32852.0000 1 O-ring (Also use item 24) 17 32602.0000 1 Piston18 32853.0001 1 Spring, Flow Control 19 32624.0000 1 Bonnet, Adjuster 20 33725.0000 1 O-ring (Also use item 24) 21 32623.0000 1 Adjuster, Position 22 32851.0000 1 O-ring (Also use item 24) 23 37977.0000 1 Bracket, Water Adjustment 01308.0000 2 Screw #6-32 x .25"24M2568.1000-Grease, USDA H-1 (Use when assembling items 13,16,20 & 22)38311 1117062638311 111706ITEMPART NO.QTY.DESCRIPTION27* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.PLAIN WATER MANIFOLD (Early Models)1 32631.00002 Fitting, Straight 2 32849.0001 2 O-ring3 38129.0005* 2 Hose, Braided .25" ID x 2.25" (Order item 12)4 21275.0006 4 Clamp .40 - .50"5 36204.0000* 1 Manifold, Plain SST6 34325.0017* 1 Hose, Flex .38" ID x 1.25" (Order item 13)7 21275.0003 2 Clamp .57 - .70"8 34463.0000 1 Coupling, Quick Disconnect, Female12 38129.1000 1 Hose, Braided .25" ID x 12.0" (Cut to required length) 38129.1001 1 Hose, Braided .25" ID x 36.0" (Cut to required length) 38129.1002 1 Hose, Braided .25" ID x 120.0" (Cut to required length) 13 34325.1000 1 Hose, Flex .38" ID x 12.0" (Cut to required length) 34325.1001 1 Hose, Flex .38" ID x 36.0" (Cut to required length)34325.10021Hose, Flex .38" ID x 120.0" (Cut to required length)38311 1117062838311 111706ITEMPART NO.QTY.DESCRIPTION29* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.PLAIN WATER MANIFOLD (Late Models)38311 1117061 32631.00002 Fitting, Straight 2 32849.0001 2 O-ring3 38129.0012* 2 Hose, Braided .25" ID x 3.0" (Order item 8)4 21275.0006 6 Clamp .40 - .50"5 38605.0000 1 Tee .25" Barb6 38129.0013* 1 Hose, Braided .25" ID x 5.25" (Order item 8)7 34461.0000 1 Coupling, Quick Disconnect, Female8 38129.1000 1 Hose, Braided .25" ID x 12.0" (Cut to required length) 38129.1001 1 Hose, Braided .25" ID x 36.0" (Cut to required length)38129.10021Hose, Braided .25" ID x 120.0" (Cut to required length)3038311 111706RINSE WATER MANIFOLD & SOLENOID (Early Models) ITEM PART NO. QTY. DESCRIPTION1 32756.10002 Bottle adapter (See BOTTLE ADAPTER)2 38129.0001*3 Hose, Braided .25" ID x .44" OD x 1.50" (Order item 37)3 21275.0006 16 Clamp .40" - .50"4 36203.0000* 1 Manifold. Rinse SST5 34460.0000 1 Fitting, Quick Disconnect, Male6 34461.0000 1 Fitting, Quick Disconnect, Female7 32745.0021* 1 Hose .25" ID x .44" OD x 15.75" (Order item 38)8 33151.0005 3 Fitting, Elbow .25" Barb9 33149.0001 4 Gasket10 01085.0002 1 Solenoid Valve 120V (Includes items 11 - 14)28005.0000 1 Solenoid Valve 230V (Includes items 11- 13)01327.0000 2 Screw, Pan Head #10-32 x .38" 120V02308.0000 2 Screw, Pan Head #8-32 x .38" 230V11 28480.0000 1 Coil, Solenoid 120V28020.0000 1 Coil, Solenoid 230V12 01111.0002 1 Solenoid Repair Kit (Includes Plunger, Spring and O-ring)13 28479.0000 1 Solenoid Base Kit 120V (Includes O-ring)28021.0000 1 Core Assy Kit 230V14 28481.0000 1 Guide Kit15 00402.0001 2 Connector16 00425.0001 1 Nipple17 00425.0002 1 Nut18 38129.0001* 1 Hose, Braided .25" ID x .44" OD x 1.50" (Order item 37)19 00459.0000 1 Fitting, Bulkhead01532.0000 1 Lockwasher, Internal-toth .438"00463.0000 1 Nut, Hex .375"-2020 38129.0009* 1 Hose, Braided .25" ID x .44" OD x 4.25" (Order item 37)21 33149.0000 3 Gasket22 33151.0004 1 Fitting, Elbow .38" Barb23 21275.0003 4 Clamp .57" - .70"24 34325.0004* 1 Hose, Flex .38" ID x .595" OD x 1.5" (Order item 39)25 32749.0001 1 Tee .38" Barb x .38" Barb x .25" Barb(Continued)RINSE WATER MANIFOLD & SOLENOID (Early Models) ITEM PART NO. QTY. DESCRIPTION26 34325.0006* 1 Hose, Flex .38" ID x .595" OD x 2.25" (Order item 39)27 33150.0000 1 Nut28 33686.0000 1 Nipple29 23720.0000 1 Strainer Assy (Includes items 30 - 32)30 - - - - - - - - 1 Housing, Strainer (Order item 29)31 23721.0000 1 Screen32 23723.0000 1 End Cap33 21275.0006 2 Clamp .41 - .50"34 35573.0000* 1 Bracket, Rinse Solenoid (Early Models)01317.0003 2 Screw, Truss Head #8-32 x .38" Lkg35 32463.0000 2 Fitting, Elbow36 32849.0001 2 O-ring37 38129.1000 - Hose, Braided .25" ID x .44" OD x 12.0" (Cut to required length)38129.1001 - Hose, Braided .25" ID x .44" OD x 36.0" (Cut to required length)38129.1002 - Hose, Braided .25" ID x .44" OD x 120.0" (Cut to required length)38 32745.1002 - Hose .25" ID x .44" OD x 120.0" (Cut to required length)39 34325.1000 - Hose, Flex .38" ID x .595" OD x 12.0" (Cut to required length)34325.1001 - Hose, Flex .38" ID x .595" OD x 36.0" (Cut to required length)34325.1002 - Hose, Flex .38" ID x .595" OD x 120.0" (Cut to required length)ITEMPART NO.QTY.DESCRIPTIONRINSE WATER MANIFOLD & SOLENOID (Late Models)(Continued)1 32756.10002 Bottle adapter (See BOTTLE ADAPTER) 2 32849.0001 2 O-ring3 32463.0000 2 Fitting, Elbow4 38129.0009* 1 Hose, Braided .25" ID x 4.25" (Order item 40)5 21275.0006 8 Clamp .40" - .50"6 38129.0004* 1 Hose, Braided .25" ID x 3.50" (Order item 40)7 38605.0000 1 Tee .25" Barb8 38129.0001* 1 Hose, Braided .25" ID x 1.50" (Order item 40) 9 34460.0000 1 Fitting, Quick Disconnect, Male 10 34461.0000 1 Fitting, Quick Disconnect, Female11 32745.0021* 1 Hose .25" ID x 15.75" (Order item 39)(Early models prior to Water Inlet Valve) 38129.0014* 1 Hose .25" ID x 13.0" (Order item 40)(Late models with Water Inlet Valve) 12 01085.0002 1 Solenoid Valve 120V (Includes items 13 - 16) 28005.0000 1 Solenoid Valve 230V (Includes items 13- 15) 01327.0000 2 Screw, Pan Head #10-32 x .38" 120V02308.0000 2 Screw, Pan Head #8-32 x .38" 230V 1328480.0000 1 Coil, Solenoid 120V 28020.0000 1 Coil, Solenoid 230V14 01111.0002 1 Solenoid Repair Kit (Includes Plunger, Spring and O-ring) 15 28479.0000 1 Solenoid Base Kit 120V (Includes O-ring) 28021.0000 1 Core Assy Kit 230V 16 28481.0000 1 Guide Kit17 35573.0000* 1 Bracket, Rinse Solenoid (Early Models) 01317.0003 2 Screw, Truss Head #8-32 x .38" Lkg 18 00402.0001 1 Connector19 33151.0005 1 Fitting, Elbow .25" Barb 20 33149.0001 1 Gasket21 33152.0001 1 Fitting .38" Barb x .125" MPT22 34325.0022* 1 Hose, Flex .38" ID x 2.50" (Order item 41) 23 32750.0001 1 Tee .38" Single Barb24 34325.0021* 1 Hose, Flex .38" ID x 8.0" (Order item 41) 25 33686.0000 1 Nipple33150.00001NutRINSE WATER MANIFOLD & SOLENOID (Late Models) ITEM PART NO. QTY. DESCRIPTION26 21275.0003 5 Clamp .57" - .70"27 36203.0000* 1 Manifold. Rinse SST (Early Models)28 33149.0000 2 Gasket29 23720.0000 1 Strainer Assy (Includes items 30 - 32)30 - - - - - - - - 1 Housing, Strainer (Order item 29)31 23721.0000 1 Screen32 23723.0000 1 End Cap33 01533.0005 2 Spacer01326.0006 2 Screw, Truss Head #10-32 x .625"34 00464.0001 1 Elbow .25" Barb x .125"MPT35 34325.0004* 2 Hose, Flex .38" ID x 1.50" (Order item 41)36 35077.0000 1 Tee, Nylon .38" Barb37 36233.0000 1 Valve, Water Inlet 120V36233.0001 1 Valve, Water Inlet 230V32283.0000 2 Screw, Pan Head M4 x 6mm38 37297.0000 1 Elbow39 32745.1002 - Hose .25" ID x .44" OD x 120.0" (Cut to required length)40 38129.1000 - Hose, Braided .25" ID x .44" OD x 12.0" (Cut to required length)38129.1001 - Hose, Braided .25" ID x .44" OD x 36.0" (Cut to required length)38129.1002 - Hose, Braided .25" ID x .44" OD x 120.0" (Cut to required length) 41 34325.1000 - Hose, Flex .38" ID x .595" OD x 12.0" (Cut to required length)34325.1001 - Hose, Flex .38" ID x .595" OD x 36.0" (Cut to required length)34325.1002 - Hose, Flex .38" ID x .595" OD x 120.0" (Cut to required length)PUMP ASSEMBLYITEM PART NO. QTY. DESCRIPTION- 33803.1001 1 Pump Assy (Includes items 1 - 29)1 32613.1002 1 Motor Assy01322.0001 4 Screw #8-32 x 1.25"2 32654.0000 1 Magnet Hub01512.0000 1 Lockwasher, Internal-tooth #1001331.0004 1 Screw, Locking #10-32 x .50"3 33608.1000 1 Sensor, RPM02336.0000 2 Screw #4-40 x .38"4 07130.0000* 1 Cable Tie5 32957.0000 4 Bushing6 37152.0001 1 Mount Assy, Pump7 29904.0000 1 Insert, Well Nut #8-328 33781.0000 1 Gasket9 28755.0010* 1 Tube, Norprene .25" ID x 18.5" lg (Order item 17)10 32732.0000 1 Clamp .39"/.48"11 32656.0000 1 Fitting, Elbow .25" Barb x .38" Barb12 21275.0003 1 Clamp .57"/.70"13 34325.0019* 1 Hose, Flex .375" ID x 5.75" lg (Order item 18)14 28759.0000 1 Pump Assy. (Includes items 15 & 16)15 28794.0000 1 Rotor16 01370.0001 4 Screw, Pan Head #8-32 x 2.45"17 28755.1000 - Tube, Neoprene .25" ID x .45" OD x 12.0" (Use as required)28755.1001 - Tube, Neoprene .25" ID x .45" OD x 36.0" (Use as required)28755.1002 - Tube, Neoprene .25" ID x .45" OD x 60.0" (Use as required) 18 34325.1000 - Hose, Flex .375" ID x 12.0" (Use as required)34325.1001 - Hose, Flex .375" ID x 36.0" (Use as required)34325.1002 - Hose, Flex .375" ID x 120.0" (Use as required)19 39689.0000 - Pump Tube (Includes items 9,10,11,12 & 13)。

德尔塔威尔Deltaweld 350系统MIG氧化燃烧系统说明书

Deltaweld ®350 SystemsMIG WeldingSystemsIssued March 2021 • Index No. DC/16.5Power source is warrantied for three years, parts and labor. Original main power rectifier parts are warrantied for five years.Gun warrantied for 90 days, parts and labor.INTEGRATEDPACKAGESUPERIORARCPERFORMANCEEASY TO SET UPAND USEReady to weldReduce the time and hassle of setting up welding systems. Make your move to a weld-ready Deltaweld MIGRunner ™. Dedicated wire feeder options•Intellx feeder — New arc control feature means welders can produce better welds with minimal parameter adjustments. •Intellx Pro feeder — Adds Accu-Pulse ®, EZ-Set, steel weld programs, and memory buttons.Legacy meets pulseAccu-Pulse offers a more forgiving arc and compensates for variations in operator technique, providing a wider operating window. Easy to useEZ-Set simplifiesparameter setup based on material thickness, removing complexity.Make Your MoveThe new standard in manufacturing provides thesolution for welders of all skill levels, plus pulsed MIG capabilities with Intellx Pro integrated packages.Deltaweld 350 MIGRunner ™with Intellx ™ Pro feeder shown.Miller Electric Mfg. LLCAn ITW Welding Company 1635 West Spencer Street P.O. Box 1079Appleton, WI 54912-1079 USAEquipment Sales US and CanadaPhone: 866-931-9730 FAX: 800-637-2315International Phone: 920-735-4554 International FAX: 920-735-4125Optional Welding Intelligence ™ weld monitoring system. Get more done, produce higher-quality welds and control costs. See page 4 for more information.2and tensioners feed wire in its truest and straightest form for consistent feedability, resulting in better welding performance.Accu-Mate ™ connection aligns the gun perfectly in the drive-roll carrier — preventing the gun from being pulled loose and providing consistent wire feeding.Drive rolls and guides are commonwith other Miller ® industrial feeders (use existing, not new parts). Inlet guide and intermediate guide installation is toolless.Rotatable drive assembly allows operator to rotate the drive, eliminating severe bends in the wire feed path. This extends gun-liner life and aids in feeding difficult wires.Quality-engineered cable management protects yourconnections to keep you productive.Intellx Pro single-wire feeder shown.Deltaweld 350 with Insight Core ™ shown.Deltaweld ®350 System FeaturesDisplay and controls for volts/arc length, wire feed speed, and EZ-Set (if selected)Memory buttons for quick program recall LCD setup screen for easy selection of welding processes Arc control to fine tune the welding arc Trigger hold, trigger select, preflow and postflow buttonsJog and purge buttonWind Tunnel Technology ™ . Internal air flow that protects electrical components and PC boards from dirt, dust, debris — greatly improving reliability. Fan-On-Demand ™ operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine. ArcConnect ™ is a next generation communication that utilizes high speed signals to improve weld performance and allow point-of-use controls to be located at the feeder. Standard 115-volt auxiliary power provides 15 amps of circuit-breaker-protected power.3Single-wire feeder swivels for convenience and function, eliminating wear on gun and liner assembly. It moves with the MIG gun, allowing operator to see the front of the feeder and which parameters are selected.Processes available include: •MIG•EZ-Set MIG (Intellx Pro only)•EZ-Set Accu-Pulse (Intellx Pro only)Feeder programs (Intellx Pro only) available include: •Steel•Stainless steel •Flux-cored •Metal-cored•Different wire sizes •Different gas typesIntellx ™Feeder FeaturesFeature Intellx ™Feeder Intellx ™ Pro FeederDigital meters Remote voltage Wire feed speedDual-wire models allow two different wire types to be available on one feeder, avoiding downtime from changing spools and drive rolls.4Deltaweld ®350 System ProcessesTake the performance of each process to the highest levelRatings A, B, C, and D are relative values. An “A” rating indicates a best fit between yourperformance needs and process. A “blank” rating indicates that the process is not recommended for that application.Accu-Pulse ®•More forgiving arc compensates for variations in operator technique •Most adaptive arc on 16 gauge (1.6 mm) and thicker•Designed for all weld positionsInsight Welding Intelligence ™: The Total Welding Data SolutionWith an Insight weld monitoring system you can get more done, produce higher-quality welds and control costs. Learn more at /insightInsight Core is an easy-to-use welding information solution that gives visibility into your operation so you can improve productivity.•Measure welding productivity. See each welder’s arc-on time to set baselines, plan improvements and measure goals.•View easy-to-understand reports. Dashboards show trends anddevelop reports. Compare welders, cells and plants.•Identify welding costs. Make improvements to reduce expenses. •Easily install and use. Just connect it to the internet. View secure dataon any web-connected device anywhere.Deltaweld 350 with Insight Core shown. See page 8 for a complete list of models with Insight Core.5Duty Cycle Chart103020405070608090100050100W e l d i n g A m p e r e s% Duty Cycle150200250300350400450500Deltaweld ®350 Performance DataCertified by Canadian Standards Association to both the Canadian and U.S. Standards.Certified by Canadian Standards Association to both the Canadian and U.S. Standards.Mode MIG (GMAW)Amp/Volt Ranges 10–38 VRated Out p ut300 A at 29 VDC, 100% duty cycle 350 A at 31.5 VDC, 60% duty cycle 425 A at 35.25 VDC, 30% duty cycleAmps Input at Rated Output, 60 Hz, 3-Phase208 V 230 V 460 V 575 V KVA KW 29.3 26.5 14.6 — 11.6 10.0 36.7 33.4 18.1 — 14.5 12.5 50.0 45.1 23.1 — 18.5 16.9Net Weight 115 lb.(52.2 kg)Dimensions (Includes lift eye) H:22.36 in. (568 mm) W:15.35 in. (390 mm) D:29.15 in. (740 mm)Genuine Miller® AccessoriesDeltaweld350/500Running Gear301523Features smallfootprint, dual-cylinder rack,chains for gascylinders, ergo -nomic handle design and lockable front casters with two torch holders, and storage area below. Cart Accessory Kit 301528Single-wire feeder kit for use with running gear 301523. See note below for dual-wire feeder kit. Consists of flowmeter regulator with 5-foot (1.5 m) gas hose, 10-foot (3 m) 4/0 feeder weld cable with lugs, 15-foot (4.6 m) work cable with 600-amp C-clamp, and 9-foot (2.7 m) ArcConnect control/ motor cable. Dual kit comes with an additional flowmeter regulator and gas hose.Note: For dual-wire feeder kit both 301528 and 301579 are required. Stationary Handle Kit 301529Allows easy movement and portability of thepower source.Feeder Swivel Kit 301533For single- and dual-wire feeders. Allows feederto mount to the top of Deltaweld.Note: ONLY the single-wire feeder can swivel.Hanging Bail 058435Used for suspending feeder over work area.ArcConnect Control/Motor Cables280471009 9 ft. (2.7 m)280471015 15 ft. (4.6 m)280471025 25 ft. (7.6 m)280471050 50 ft. (15.2 m)280471075 75 ft. (22.9 m)280471100 100 ft. (30.5 m)280471150 150 ft. (45.7 m)Connects power source directly to feeder orremote operator interface.Note: Cables cannot be joined together to createlonger lengths and extension cables are not available.Work Sense Leads(volt sense)300461 25 ft. (7.6 m)300462 50 ft. (15.2 m)When connectedfrom the back of thewire feeder to theworkpiece, the worksense lead provides accurate voltage feedbackon the wire feeder display, and compensates forany voltage drop from the weld cables.Drive Roll Kits and GuidesSelect drive roll kits from chart below according to type and wire size being used. Drive roll kits include four drive rolls, necessary guides and feature an anti-wear sleeve for inlet guide. “U” cogged forextremely soft“U” groove for wire or soft-soft wire or “V” knurled shelled coredsoft-shelled for hard-shelled wires (i.e., hardWire Size for hard wire cored wires cored wires facing types)*Included with Intellx feeders. Drive roll is dual-size reversible with one .035-inch and one .045-inch groove.**Drive roll is dual-size reversible with one .035-inch and one .045-inch groove which also accommodates .047-inch (3/64-inch) wire.6Typical Deltaweld ®350 System Installationscontrol/motor cable(one required)Deltaweld power sourceSingle-wire feeder with ®Bernard ® BTB MIG gunsDeltaweld power sourceBTB MIG gunscontrol/motor cable*Deltaweld *Required optional the floor for 16-foot Swingarc. See page 8.*Remote wire drive installations require two total control/motor cables.with Bernard ® BTB MIG gun(s)Standard installationSwingarc ™ boom-mounted installationAccommodates a wide variety of semi-automatic applications, including large weldments and hard-to-reach areas.Remote wire drive installationIdeal for fixed automation and boom applications where the wire drive motor is installed/controlled remotely.111Dual-wire modelSingle-wire model855Intellx or Intellx Produal-wire remote wire drive7Required* pipe postOptional* Swingpak baseOptional*single/dual spool carrier (for 6 ft. pipe post only)Ordering Information Most popular modelsDeltaweld® 350 Packages Stock No. Description Qty. PricePower Sources Stock No. Description Qty. PriceDate: Total Quoted Price:Distributed by:©2021 Miller Electric Mfg. LLC。

美国第二大家装零售商劳氏公司

美国第二大家装零售商劳氏公司
佚名
【期刊名称】《连锁时代：报刊精萃》
【年(卷),期】2011(000)007
【摘要】北京时间8月22日晚间消息，美国第二大家装用品零售商Lowe’s Cos（LOW）宣布，计划回购至多价值50亿美元的普通股。

虽然此项回购计划未设到期日，但Lowe’S表示，预计将在未来两到三年内用完全部回购授枚。

【总页数】2页(P36-37)
【正文语种】中文
【中图分类】F713.32
【相关文献】
1.劳氏伤科与《劳氏家宝》
2.劳氏:为更安全的社会环境而共同努力——访劳氏质量认证北亚区总经理王崧
3.美国最大家电零售商百思买开始卖乐器
4.劳氏质量认证（上海）有限公司劳氏质量认证有限公司授权机构
5.美第二大家电零售商Circuit City 破产
因版权原因，仅展示原文概要，查看原文内容请购买。

UGG旗下三大品牌2017年销量大增聚焦数字化解决方案

UGG旗下三大品牌2017年销量大增聚焦数字化解决方案何珺【摘要】联合磨削集团(UNITED GRINDING Group,以下简称“UGG”)旗下三大知名磨床品牌STUDER、SCHAUDT和MIKROSA于2月2日在年度Motion Meeting上展示了企业发展策略和新产品。

本刊记者从发布会上获悉,STUDER和SCHAUDT MIKROSA公司2017年超预期完成订单任务,尤其是在中国汽车行业收获多个大单。

此外,德国市场的回归也是销量大增的主要因素。

【期刊名称】《今日制造与升级》【年(卷),期】2018(000)003【总页数】3页(P44-46)【作者】何珺【作者单位】;【正文语种】中文【中图分类】F416.4联合磨削集团（UNITED GRINDING Group，以下简称“UGG”）旗下三大知名磨床品牌STUDER、SCHAUDT和MIKROSA于2月2日在年度MotionMeeting上展示了企业发展策略和新产品。

本刊记者从发布会上获悉，STUDER和SCHAUDT MIKROSA公司2017年超预期完成订单任务，尤其是在中国汽车行业收获多个大单。

此外，德国市场的回归也是销量大增的主要因素。

与此同时，这三大磨床品牌将客户关怀提升到更重要的位置，并凭借精准的技术和先进的数字化工厂为未来更长远的发展打下基础。

销量超预期2017年春季展会的开门红，带给Jens Bleher极大的信心。

事实证明，年初的好势头一直持续到年底。

“2017年全年订单量明显超出此前的计划。

”作为STUDER、SCHAUD-TMIKROSA公司的首席执行官，Jens Bleher如是总结了过去一年的产销情况。

事实上，自2017年6月起，STUDER公司就已经超额完成任务，并且几乎所有分公司的订单量都有所提升。

由此可见，“排放门”丑闻后的行业下滑趋势已经得到遏制，并且汽车行业的投资活动正快速回归常态。

从STUDER公司所接订单的地域分布来看，西欧仍是最主要的销售市场，德国业务再次大幅增长，北美市场保持既有份额。

芝加哥热点6系列60x60厨具，黑色HRG579BB6B说明书

Series 6, Built-in oven with addedsteam function, 60 x 60 cm, BlackHRG579BB6BIncluded accessories2 x combination grid, 1 x universal panOptional accessoriesHEZ317000 Pizza pan, enamelled, HEZ327000 Pizza stone,HEZ333001 Lid for professional pan, HEZ530000 Half tray,HEZ531000 Baking tray, enamelled, HEZ531010 Baking tray,non-stick ceramic coated, HEZ915003 Glass roasting dish, 5,4 L, HEZ532000 Multipurpose pan, enamelled, HEZ532010 Universal pan, non-stick ceramic coated, HEZ533000 Professional pan, enamelled, HEZ538000 1fold telescopic rail, level independent, HEZ629070 Air Fry & Grill tray, HEZ633001 Lid for professional pan, enamelled, HEZ633070 Professional pan, enamelled, HEZ634000 Baking and roasting grid (standard), HEZ636000 Glass pan, HEZ638000 Full ext rails, level independent, HEZ660050 Cover Strip, HEZ664000 Baking and roasting grid (steam)The built-in oven with added steam: achieve delicious baking results thanks to hotair steam heating mode.• AutoPilot 40: every dish is a perfect success thanks to 40 pre-set automatic programmes.• TFT display control: easy-to-use thanks to display with full text and symbols.• Pop-out controls: Make the front of the oven easy to clean and give it a sleek look.• Pyrolytic self-cleaning: Automatically cleans the oven, just wipe out the ash.• Cleaning Assistance: less cleaning effort thanks to the new cleaning option, which can be especially used for cleaning of light soiling.Technical DataInstallation type: ......................................................................Built-in Integrated Cleaning system: ................................Pyrolytic+Hydrolytic Min. required niche size for installation (HxWxD): 585-595 x 560-568 x 550 mmDimensions: ........................................................595 x 594 x 548 mm Dimensions of the packed product (HxWxD): .....675 x 690 x 660 mm Control Panel Material: ..............................................................Glass Door Material: ............................................................................Glass Net weight: ..............................................................................38.6 kg Usable volume of cavity: ...............................................................71 l Cooking method: .......Defrost, Full width grill, Hotair gentle, Hot Air, Intensive heat, Half width grill, Conventional heat, Pizza setting, low temperature cooking, Bottom heat, Hot air grilling, pre-heating, warmingFirst cavity material: ..................................................................Other Oven control: ......................................................................electronic Number of interior lights: .. (1)Length of electrical supply cord: ..........................................120.0 cm EAN code: (4242005332151)Number of cavities (2010/30/EC): (1)Energy efficiency rating: ....................................................................A Energy consumption per cycle conventional (2010/30/EC): ........0.99 kWh/cycleEnergy consumption per cycle forced air convection (2010/30/EC):0.81 kWh/cycleEnergy efficiency index (2010/30/EC): .....................................95.3 % Connection rating: ..................................................................2990 W Fuse protection: ...........................................................................13 A Voltage: ...............................................................................220-240 V Frequency: ...........................................................................50; 60 Hz Plug type: .....................no plug (electrical connection by electrician) Included accessories: .............2 x combination grid, 1 x universal panSeries 6, Built-in oven with addedsteam function, 60 x 60 cm, BlackHRG579BB6BThe built-in oven with added steam: achieve delicious baking results thanks to hotair steam heating mode.Features- Oven with 14 heating methods: 3D Hotair, conventional top and bottom heat, Hotair grilling, full width variable grill, half width grill, pizza function, bottom heat, intensive heat, low temperature cooking, defrost, plate warming, keep warm, Hotair gentle, hot air and steam combined- Temperature range 30 °C - 275 °C- Cavity volume: 71 litre capacityLevel independent telescopic rails- 5 shelf positions- Available as an additional accessoryDesign- Rotary dial, Retractable control dials, round- Extra large capacity oven with grey enamelCleaning- Pyrolytic self-cleaning function- Cleaning Assistance: hydrolyse manual- Full glass inner doorProgrammes/functions- BE54- Electronic clock timer- Digital temperature display with proposal- Actual temperature display Heating-up indicator AutoPilot Automatic start- AutoPilot, 40- Drop down door, SoftClose, SoftOpen- Straight bar handle- Automatic programmes- Fast pre-heating function- Interior halogen light, Light on/off when oven door opened/closed - Water bowl with a volume of 250 ml- Integral cooling fan- Info buttonAccessories- 2 x combination grid, 1 x universal panFeatures- Maximum window temperature 30° C- Low door temperature during pyrolitic cleaning- Electronic door lock- Control panel lock Automatic safety switch off Residual heat indicator Door contact switchTechnical information- 120 cm Cable length- Nominal voltage: 220 - 240 V- Total connected load electric: 2.99 KW - Energy efficiency rating (acc. EU Nr. 65/2014): A- Energy consumption per cycle in conventional mode:0.99 kWh- Energy consumption per cycle in fan-forced convection mode:0.81 kWh- Number of cavities: Main cavity Heat source: electrical Cavity volume:71 litre capacityPerformance/technical information- Appliance dimension (hxwxd): 595 mm x 594 mm x 548 mm- Niche dimension (hxwxd): 585 mm - 595 mm x 560 mm - 568 mm x 550 mm- Please refer to the dimensions provided in the installation manual - We recommend you to choose complementary products within SER6, in order to assure an optimal design combination of your Built-In appliances.。

世界包装大鳄SIG集团在华首家工厂开业

世界包装大鳄SIG集团在华首家工厂开业
佚名
【期刊名称】《中国印刷》
【年(卷),期】2005(000)001
【摘要】世界第二大无菌纸包装公司瑞士SIG集团康美包公司在中国境内设立的第一家生产工厂，最近在苏州工业园区开业。

【总页数】1页(P128)
【正文语种】中文
【中图分类】TS206
【相关文献】
1.百事加速转型在华首家桂格燕麦工厂开业 [J], 方玮晴
2.佛吉亚在华发展迎来里程碑，首家工厂庆祝在华发展20周年 [J],
3.百事在华首家桂格燕麦工厂开业 [J],
4.NN集团首家亚洲工厂在昆山隆重开业 [J],
5.世界风电业巨头在华首家工厂开业 [J], 石卫东
因版权原因，仅展示原文概要，查看原文内容请购买。

【尚友制造】世界500强那些高官的简历(第一辑)

Charles worked for Tandy Corporation as managing director for its Eu ropean Memorex consumer product division (Memtek International) and served as director of finance for its international operations. He also spent more than 10 years with Ernst & Young.

Mike joined Walmart in 1995, and began to lead the logistics, distribution and administration divisions as well as Walmart U.S. From 2005 to February 2009, Mike served as vice chairman of the company, with responsibility for Walmart International.

Mike serves on the board of directors of Wal-Mart Stores, Inc., the board of directors of The Consumer Goods Forum, the executive committee of Business Roundtable and is on the executive board of Conservation International's Center for Environment Leadership in Business. He also serves on the board of advisors for the University of Arkansas and the advisory board of the Tsinghua University School of Economics and Management in Beijing, China.

美国Jazwares公司成功之路

美国Jazwares公司成功之路
黄子婧
【期刊名称】《中外玩具制造》
【年(卷),期】2022()5
【摘要】有这么一家公司,虽然在中国知名度不高,也没有数十年悠久的历史,但凭借着敏锐的潮流触觉,产品频频出圈,获得了消费者的喜爱。

经历25年发展,在2021年就突破了全年销售额10亿美元大关,获得了“美国成长最快玩具公司之一”的美誉。

它就是美国热门毛绒玩具Squishmallows的母公司Jazwares。

【总页数】3页(P62-64)
【作者】黄子婧
【作者单位】不详
【正文语种】中文
【中图分类】F42
【相关文献】
1.千富之首——美国通用电气公司的成功之路
2.美国通用汽车公司的成功之路
3.美国通用汽车公司的成功之路
4.安利在中国的成功之路安利，改变与成功都在中国——访美国安达高公司执行副总裁BillPayne及安利(中国)日用品有限公司总裁黄德荫
5.安利在中国的成功之路安利,改变与成功都在中国——访美国安达高公司执行副总裁BillPayne及安利(中国)日用品有限公司总裁黄德荫
因版权原因，仅展示原文概要，查看原文内容请购买。

芝加哥浓缩咖啡机3100系列6种饮料集成牛奶壶黑色光泽AquaClean EP3360 00一键咖啡

3100 series6 BeveragesIntegrated milk carafeGlossy BlackAquaCleanEP3360/00One touch espresso and cappuccino exactlyyour wayEnjoy up to 5000 cups* of coﬀee without descalingGet your perfect espresso and cappuccino from fresh beans thanks to the 100%ceramic grinders and select strength, temperature and length via the intuitivedisplay. Your hot cappuccino is a one-touch job, thanks to the Integrated milk jug.A variety of coﬀees customized to your tasteEnjoy 6 beverages at your ﬁngertips, including cappuccinoAdjust the volume, 5 aroma strength and 5 grinder settingsDecaﬀeinated with equal zest with the Powder OptionOne-touch Cappuccino and Latte Macchiato with milk carafeYour fresh coﬀee experience20,000 cups of ﬁnest coﬀee with durable ceramic grindersAdjust your coﬀee spout to ﬁt any cupSmooth milk foam from the carafe frotherEnjoy your coﬀees every day with no hassleUp to 5000 cups* without descaling thanks to AquaCleanDesigned to maximize capacities in a compact footprintEasily operate your machine via the intuitive displayEnjoy a great coﬀee with Auto-Rinse & guided descalingClean milk residues after every use with milk clean functionHighlightsAquaClean ﬁlterBy changing the ﬁlter after being prompted by the machine, you will not need to descale your machine for up to 5000 cups*, while enjoying clear and puriﬁed water.6 beveragesEnjoy a wide variety of drinks to suit anyoccasion. Whether you crave for an espresso, a coﬀfee or a milk based recipe, your Super-automatic machine delivers a perfect in-cup result with no hassle and in no time!Customize your coﬀeesThis Fully-Automatic machine oﬀers an abundance of indulgent options to customize your beverage to your taste. You can easilypersonalize and memorize length, strength and temperature for each drink. Feel free to explore,experiment and dream up any drink!Powder OptionSometimes it’s nice to have the option of a full-bodied, delicious coﬀee, without the caﬀeine kick. Thanks to the Powder Option you can make decaﬀeinated coﬀee whenever you please.100% ceramic grindersOur grinders are 100% pure ceramic: extremely hard and precise, so you can enjoy fresh aromatic coﬀee, for at least 20.000 cups.Adjustable coﬀee spoutThe adjustable spout on our espressomachines will ﬁt every cup and thus prevents the coﬀee splashing or cooling down while pouring in your cup. This way your espresso is always served at the right temperature while maintaining a clean machine.Latte Perfetto TechnologyEvery coﬀee you prepare will be topped with a silky, milk layer that beckons the taste buds.The milk carafe froths the milk twice, thenpours a splash free creamy layer into your cup at just the right temperature. The carafe can also be stored conveniently in the fridge and it is incredibly hygienic.High capacity & compact designEnjoy more room and go longer without reﬁll thanks to the high-capacity bean, water, and waste containers in a super-compact design.This smart, super-automatic machine provides you with maximum convenience and top notch performance thanks to a large capacity water tank, bean and waste container.Intuitive DisplayThe intuitive display shows you all relevant information to easily interact with yourmachine and get the best performance. The icons will guide you through all customisation options and important maintenance activities.SpeciﬁcationsDesignColor: Glossy BlackGeneral speciﬁcationsEase of cleaning & maintenance: AquaClean ﬁlter compatibleMilk Solution: Integrated Milk CarafeUser Interface: Basic DisplayT echnical speciﬁcationsCapacity milk carafe: 0.5 LCapacity waste container: 15 servings Frequency: 50 HzMax. cup height: 152 mmVoltage: 230 VCord length: >100 cm Waste container: Frontal accessWater tank: Access from the topWeight of product: 7.2 kgProduct dimensions: 215 x 330 x 429 mmCoﬀee bean capacity: 250 gCapacity water tank: 1.8 LCustomizationAroma Strength Settings: 5Grinder Settings: 5Pre Brew Aroma control: NoUser Proﬁles: 1Temperature settings: 3Coﬀee and Milk Length: AdjustableVarietyBeverages: Espresso, Hot water, Cappuccino,Coﬀee, Milk froth, Latte MacchiatoCoﬀee Powder OptionDouble CupMilk Double Cup: NoOther featuresAuto-Rinse & Guided descalingMain Switch ON / OFF buttonQuick Heat BoilerRemovable brew group* Based on 8 ﬁlters replacement as indicated by themachine. Actual number of cups depends on selectedcoﬀee varieties, rinsing and cleaning patterns.© 2020 Koninklijke Philips N.V.All Rights reserved.Speciﬁcations are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.Issue date 2020‑07‑29 Version: 3.0.1。

美国机器与工具公司产品维修部件手册.pdf_1719190261.8263457说明书

Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. The Safety Instructions are contained in the General Operating Instructions. Failure to comply with the safety instructions accompanying this product could result in personal injury and/or property damage! Retain instructions for future reference . AMT reserves the right to discontinue any model or change specifications at any time without incurring any obligation.©2011 American Machine & Tool Co., Inc. of PA, A Subsidiary of The Gorman-Rupp Company, All Rights Reserved.Periodic maintenance and inspection is required on all pumps to insure proper operation. Unit must be clear of debris and sediment. Inspect for leaks and loose bolts. Failure to do so voids warranty.Submersible Shredder PumpsRefer to pump manual 1808-636-00 for General Operating and Safety Instructions.DESCRIPTIONThese heavy duty centrifugal Submersible Shredder Pumps are intended for use in residential, commercial, and industrial settings. Examples include: Sewage, wastewater, and other general processing applications involving dirty liquids with small solids (see size chart below). Submersible design means low noise and no priming issues.Each unit is completely assembled and includes a self-cleaning, semi-open cast iron impeller featuring a tungsten carbide cutting tip for durability while helping to break-up solids. Pumps incorporate a mechanical shaft seal with long-lasting silicon carbide wear faces and feature a secondary shaft seal and oil chamber.Pumps have a 3450 RPM electric motor fitted with an unfinished power cord that requires field wiring (no controls are supplied). Motors are rated continuous duty and single phase units have automatic restart thermal overload protection. Handle liquids from 40° to 104° F (4° to 40° C). For use withnon-flammable liquids compatible with pump component materials.MAINTENANCEMake certain that unit is disconnected from power source before attempting to service or remove any components!POWER CORD REPLACEMENTPeriodically inspect power cord and replace whenever abrasion, cracking, softening, or other signs of deterioration are found.Refer to Figures 1 and 2. 1. Place unit on workbench in upright position. Clean dirt andrust from around wire cover (Ref. No. 7).2. Remove two fasteners (Ref. No. 4) which hold cord retainer(Ref. No. 3).3. Remove fastener(s) (Ref. No. 5) at handle (Ref. No. 6) tofree wire loom (Ref. No. 2).4. Remove four fasteners (Ref. No. 8) which hold wire cover inplace.5. Carefully pry cover from unit with screwdriver.IMPORTANT: Be careful to keep rust and other debris from falling into motor housing during cover removal. 6. Takenote of proper wire configuration, and connect newpower cord (Ref. No. 1) in identical fashion.If unsure about above information or wiring diagrams, consult an electrician familiar with motor wiring. 7. Clean sealing flanges if necessary and reassemble pump inreverse order.IMPELLER INSPECTION /REPLACEMENTIf pump develops poor performance characteristics, impeller may be worn or clogged.IMPELLER INSPECTIONRefer to Figure 2 1. Place unit on workbench in upright position and clean rustand buildup from around pump-to-motor flange.2. Remove four short fasteners (Ref. No. 15) which attachpump to motor.3. Lift motor assembly up out of pump assembly and lay on workbench in horizontal position. Rap down on pump bodywith soft mallet if necessary to separate parts.4.Inspect impeller (Ref. No. 26). If clog is found, remove debris and reassemble in reverse order. If damage to impeller is found, such as pitting, deep grooves, or breakage, proceed to next section.IMPELLER REPLACEMENT1.Remove impeller fastener (Ref. No. 28) by unscrewing in counterclockwise direction.NOTE: To prevent motor shaft from turning, wedge a screwdriver between impeller vane and impeller fastener (see Figure 2). 2. Slide off impeller washer (Ref. No. 27). Impeller is keyed tomotor shaft and can now be pulled free.3. Install replacement impeller and reassemble in reverseorder.MECHANICAL SEAL REPLACEMENTMotor internals are protected from contact with liquid being pumped by a mechanical shaft seal and oil cavity. When seal wears out, potential motor life will be compromised. Therefore, periodic seal replacement is recommended. Time interval between replacements will depend on abrasiveness of liquid being pumped, temperature, total accumulated runtime, etc.IMPORTANT: Always replace seal head (Ref. No. 18) and both seal seats (Ref. Nos. 17 & 19) at same time to insure proper mating of components.Refer to Figure 2 1. Disasse mble pump by following directions in both “PowerCord Replacement” and “Impeller Inspection / Replacement” sections.2. With unit on its side and wire cover, pump assembly, andimpeller removed, lift shaft key (Ref. No. 13) from shaft/rotor (Ref. No. 12) using a pliers.3. Clean rust and buildup from unit.4. From top of unit, remove four long fasteners (Ref. No. 10)which attach lower end bell (Ref. No. 16) to motor case (Ref. No. 11).5. Rap on ears of lower end bell with a soft mallet to break itfree from motor case. Then carefully guide lower end bell along with shaft/rotor and bearing assembly out of motor case.Submersible Shredder Pumps6. Drain oil from seal cavity by removing drain screw (Ref. No.23) and seal (Ref. no. 22) from seal plate (Ref. No. 21). Thentip components upright overtop of a catch pan until oil isdrained.7. Remove three fasteners (Ref. No. 25) and pry out seal platewith screwdriver. Slinger washer (Ref. No. 24) will come freeat this time.8. Use a press or gear puller to remove shaft and bearings fromlower end bell. Shaft seal head will now be free.IMPORTANT: Shaft seal head (with spring) has unique ends, and twoseal seats are different from one another also. Be sure to note size andcolor of each before disassembly so that new parts are installed inproper orientation.9. Remove upper seal seat (Ref. No. 17) from lower end bell byusing a screwdriver or dowel to press on seal from rear. Dothe same for lower seal seat (Ref. No. 19) in seal plate.10. Clean seal seat cavities before inserting new seals.11. Carefully wipe polished surface of new seal seats with a cleancloth.12. Wet outside of rubber portion of seal seats with a light coatingFigure 1 – Impeller Removal of soapy water.13. Press each new seal seat squarely into cavity in both sealplate and lower end bell. If seal seat does not press squarelyinto cavity, it can be adjusted into place by pushing on itcarefully with a piece of pipe or dowel. Always use a piece ofcardboard between pipe and seal seat to avoid scratchingseal seat. (This is a lapped surface and must be handled verycarefully.)14. After each seal seat is in place, insure that it is clean and hasnot been marred.15. Using a clean cloth, wipe shaft and make certain that it isperfectly clean.16. Carefully guide motor shaft through seal seat and use a pressto seat bearing back into lower end bell.17. Apply a light coating of soapy water to inside rubber portion ofseal head and slide onto shaft (be sure to start correct endfirst).18. Place seal plate back onto lower end bell being careful toguide shaft and avoid damage to seal seat. Secure withfasteners.19. Press slinger washer back in place.20. Refill cavity with oil through fill hole and reassemble inreverse order.For Repair Parts contact dealer where pump was purchased.Repair Parts List1 Power Cord Kit -110VAC, 1PH 5760-350-90 - 1-220VAC, 1PH 5761-350-90 5763-350-90 1-220VAC, 3PH 5762-350-90 5764-350-90 1-440VAC, 3PH 576B-350-90 576C-350-90 1 (includes Ref. Nos. 1, 2, 3, and 4)2 Wire Loom Incl. w/ Ref. 1 Incl. w/ Ref. 1 13 Retainer Incl. w/ Ref. 1 Incl. w/ Ref. 1 14 Fastener Incl. w/ Ref. 1 Incl. w/ Ref. 1 25 Fastener * * 26 Handle Kit 5760-100-90 5763-100-90 17 Wire Cover - - -8 Fastener * * 49 Seal Incl. w/ Ref. 35 Incl. w/ Ref. 35 110 Fastener - - -11 Motor Case - - -12 Shaft/Rotor - - -13 Shaft Key - - -14 Seal Incl. w/ Ref. 35 Incl. w/ Ref. 35 115 Fastener * * 416 Lower End Bell - - -17 Upper Seal Seat Incl. w/ Ref. 35 Incl. w/ Ref. 35 118 Seal Head Incl. w/ Ref. 35 Incl. w/ Ref. 35 119 Lower Seal Seat Incl. w/ Ref. 35 Incl. w/ Ref. 35 120 Seal Incl. w/ Ref. 35 Incl. w/ Ref. 35 121 Seal Plate - - -22 Seal Incl. w/ Ref. 35 Incl. w/ Ref. 35 123 Drain Plug * * 124 Slinger Washer Incl. w/ Ref. 35 Incl. w/ Ref. 35 125 Fastener * * 426 Impeller Incl. w/ Ref. 34 Incl. w/ Ref. 34 127 Impeller Washer Incl. w/ Ref. 34 Incl. w/ Ref. 34 128 Impeller Fastener Incl. w/ Ref. 34 Incl. w/ Ref. 34 129 Casing Kit 5760-001-95 5763-001-95 130 Base Incl. w/ Ref. 34 Incl. w/ Ref. 34 131 Fastener Incl. w/ Ref. 34 Incl. w/ Ref. 34 432 Strainer Kit 5760-170-90 5763-170-90 133 Fastener * * 334 Wear Plate & Impeller Kit 5760-010-90 5763-010-90 1(includes Ref. Nos. 26, 27, 28, 30, and 31)35 Seal Kit (not shown) 5760-300-90 5763-300-90 1(includes Ref. Nos. 9, 14, 17, 18, 19, 20, 22, and 24)36 Start Capacitor -110VAC, 1PH 5760-351-00 - 1-220VAC, 1PH 5761-351-00 5763-351-00 1 37 Run Capacitor -110VAC, 1PH - - 1 -220VAC, 1PH - 5761-351-00 1 (*) Standard Hardware Item, Available LocallyFor Repair Parts contact dealer where pump was purchased.Repair Parts List576E-951 Power Cord Kit -110VAC, 1PH - - 1-220VAC, 1PH 5765-350-90 - 1-220VAC, 3PH 5766-350-90 5767-350-90 1-440VAC, 3PH 576D-350-90 576E-350-90 1 (includes Ref. Nos. 1, 2, 3, and 4)2 Wire Loom Incl. w/ Ref. 1 Incl. w/ Ref. 1 13 Retainer Incl. w/ Ref. 1 Incl. w/ Ref. 1 14 Fastener Incl. w/ Ref. 1 Incl. w/ Ref. 1 25 Fastener * * 26 Handle Kit 5765-100-90 5767-100-90 17 Wire Cover - - -8 Fastener * * 49 Seal Incl. w/ Ref. 35 Incl. w/ Ref. 35 110 Fastener - - -11 Motor Case - - -12 Shaft/Rotor - - -13 Shaft Key - - -14 Seal Incl. w/ Ref. 35 Incl. w/ Ref. 35 115 Fastener * * 416 Lower End Bell - - -17 Upper Seal Seat Incl. w/ Ref. 35 Incl. w/ Ref. 35 118 Seal Head Incl. w/ Ref. 35 Incl. w/ Ref. 35 119 Lower Seal Seat Incl. w/ Ref. 35 Incl. w/ Ref. 35 120 Seal Incl. w/ Ref. 35 Incl. w/ Ref. 35 121 Seal Plate - - -22 Seal Incl. w/ Ref. 35 Incl. w/ Ref. 35 123 Drain Plug * * 124 Slinger Washer Incl. w/ Ref. 35 Incl. w/ Ref. 35 125 Fastener * * 426 Impeller Incl. w/ Ref. 34 Incl. w/ Ref. 34 127 Impeller Washer Incl. w/ Ref. 34 Incl. w/ Ref. 34 128 Impeller Fastener Incl. w/ Ref. 34 Incl. w/ Ref. 34 129 Casing Kit 5765-001-95 5767-001-95 1 29A Flange & Gasket Kit 5765-070-95 5765-070-95 130 Base Incl. w/ Ref. 34 Incl. w/ Ref. 34 131 Fastener Incl. w/ Ref. 34 Incl. w/ Ref. 34 432 Strainer Kit 5765-170-90 5767-170-90 133 Fastener * * 334 Wear Plate & Impeller Kit 5765-010-90 5767-010-90 1(includes Ref. Nos. 26, 27, 28, 30, and 31)35 Seal Kit (not shown) 5765-300-90 5767-300-90 1(includes Ref. Nos. 9, 14, 17, 18, 19, 20, 22, and 24)36 Start Capacitor -220VAC, 1PH 5763-351-00 - 137 Run Capacitor -220VAC, 1PH 5761-351-00 - 1 (*) Standard Hardware Item, Available Locally。

旷世之作值得拥有PIEGA(品歌)Master系列产品逐个数

旷世之作值得拥有PIEGA(品歌)Master系列产品逐个数编辑部
【期刊名称】《视听前线》
【年(卷),期】2024()4
【摘要】瑞士,除了美丽的山河外,大多数人对瑞士的印象,就是瑞士钟表,其超高的技术和工艺水准,为收藏瑞士名表而在所不辞。

其实,并非只有钟表才能证明瑞士的杰出工艺,翻看欧洲音响名品花名册,就会发现不少耳熟能详的高端Hi-End品牌是源自瑞士。

对于同样是男士玩物的音响,其极致的设计以及精湛做工同样令人佩服,而瑞士音响自成一派的外观,还能够成为家居中那道靓丽的风景线。

【总页数】5页(P2-6)
【作者】编辑部
【作者单位】不详
【正文语种】中文
【中图分类】F42
【相关文献】
1.听，来自人间天堂的纯美之声记瑞士贝歌PIEGA Master One大师反射式落地箱中国发布会
2.感受瑞士殿堂级的气息 PIEGA(品歌)MASTER LINE SOURCE 2 次旗舰落地音箱
3.宏伟气度难逢敌手 PIEGA(品歌)Master Line Source落地式音箱
4.佰籁音响携手广州域丰音响开设瑞士PIEGA品歌、德国T+A佳音线下旗舰店!
5.气质非凡独门技术带来顶级体验 PIEGA品歌COAX 611落地式音箱
因版权原因，仅展示原文概要，查看原文内容请购买。

Milestone AV Technologies 产品说明书

Milestone AV Technologies6436 City West ParkwayEden Prairie, MN 55344 USACustomer ServiceAmericas:800-359-5520•651-484-7988•**************Europe,MiddleEast,andAfrica:+31(0)495580852•************************** Asia Paciﬁc:8675589969226•**********************©2012 Milestone AV Technologies, a Duchossois Group Company.IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USESpecifi cationsÙW e ight ca p acity-DO NOT EXCEED : 22.6 kg (50 lb) includ es TV and any acc ess ori es ÙTilt: ±12°CAUTION: Avoid p ot e ntial pe r s onal injuri es and p ro pe rty damag e !ÙDo not u se thi s p roduct for any p ur p o se not e x p licitly spe cifi e d by manufactur e r . ÙTh e wall mu s t b e ca p abl e of s u pp orting fi v e tim es th e w e ight of th e monitor and mount combin e d . ÙThi s p roduct i s d es ign e d for u se in wood fram e wall s only!ÙIf you do not und e r s tand th ese in s truction s , or hav e doubt s about th e s af e ty of th e in s tallation, a sse mbly or u se of thi s p roduct, contact Cu s tom e r S e rvic e or call a qualifi e d contractor .ÙManufactur e r i s not r esp on s ibl e for damag e or injury cau se d by incorr e ct a sse mbly or u se.3mmWARNING: This productcontains small items that could be a choking hazard if swallowed. B e for e s tarting a sse mbly, v e rify all p art s ar e includ e d and undamag e d . If any p art s ar e mi ss ing or damag e d, do not r e turn th e damag e d it e m to your d e al e r; contact Cu s tom e r S e rvic e. N e v e r u se damag e d p art s !NOTE: M4, M6, or M8 d es crib es th e diam e t e r, mm d es crib es th e l e ngth of s cr e w s that ar e lab e l e d M# X ##mm . Not all hardwar e includ e d will b e u se d .[01] x 1[02] x 1[03] x 2[05] x 4[06] x 4[07] x 4[08] x 4[09] x 4[10] x 4[11] x 4[12] x 4[13] x 4[14] x 4[15] x 4[17] x 4[16] x 8M4M6/M8M4M6/M8M8 x 16mm M8 x 35mmM6 x 12mm M6 x 20mm M6 x 35mmM4 x 12mm M4 x 30mmSupplied Parts and HardwareIn s tall brack e t e xt e n s ion s[03] ONLY if your TV ha s a 200 x 200 mm (79⁄10 x 79⁄10 in.) hol e p att e rn.M4/M6/M8En s ur e th e brack e t i s l e v e l on th e back of th e TV .NOTE: If th e hol e p att e rn on your TV i s 75mm x 75mm th e wa s h e r s [16, 17] will not b e u se d .If you r e quir e additional sp ac e for cabl es , r e c esses , or p rotru s ion s , choo se confi guration B .[01]Your TV ty pe will h e l p you d e t e rmin e which hardwar e confi guration to u se.A. In s tallation o p tion without sp ac e r s (TV s with fl at back s )B. In s tallation o p tion u s ing sp ac e r s (TV s with irr e gularback s )Hand thr e ad s cr e w s into th e thr e ad e d in se rt s on th e back of your TV to d e t e rmin e th e corr e ct s cr e w diam e t e r (M4, M6, or M8).CAUTION: Avoid p ot e ntial pe r s onal injuri es and p ro pe rty damag e ! V e rify that th e r e ar e ad e quat e thr e ad s to se cur e th e brack e t s to th e monitor . If you e ncount e r r es i s tanc e , s to p imm e diat e ly and contact cu s tom e r se rvic e. U se th e s hort es t s cr e w and sp ac e r combination to accommodat e your n ee d s. U s ing hardwar e that i s too long may damag e your TV .B1-1 Select the hardware diameter and length1 Select TV Hardware and Mount TV BracketEn s ur e th e brack e t i s l e v e l on th e back of th e TV. Standard confi guration s ar e s hown.NOTE: If th e hol e p att e rn on your TV i s75mm x 75mm th e wa s h e r s[16,17] will not b e u se d.For spe cial a pp lication s, or if you ar e unc e rtain about your hardwar e se l e ction, contact Cu s tom e r S e rvic e.L e v e l th e wall p lat e [02] and mark th e hol e location s.CAUTION: Avoid p ot e ntial injuri es or p ro pe rty damag e !Im p ro pe r u se could r e duc e th e holding p ow e r of th e lag bolt . To avoidp ot e ntial injuri es or p ro pe rty damag eÙDO NOT ov e r-tight e n th e lag bolt s [04].ÙTight e n th e lag bolt s [04] only until th e y ar e p ull e d firmly again s t th e wall p lat e [02].V e rify th e c e nt e r of th e s tud u s ing an awl, a thin nail, or an e dg e to e dg e s tud fi nd e r . CAUTION: Avoid p ot e ntial pe r s onal injuri es and p ro pe rtydamag e !ÙAny mat e rial cov e ring th e wall mu s t not e xc ee d 16 mm (5/8 in .). ÙMinimum wood s tud s iz e : common 51 x 102 mm (2 x 4 in .)(nominal 38 x 89 mm (1½ x 3½ in .)).CAUTION: Avoid p ot e ntial injuri es or p ro pe rty damag e ! Pilothol es MUST b e drill e d to a d ep th of 63½ mm (2½ in .), u s ing a 3 mm (1⁄8 in .) diam e t e r drill bit .[02][01]A34.92 mm(13⁄8 in.)[01][02]BS e cur e th e TV to th e wall p lat e u s ing th e locking tab (T). NOTE: If you n ee d to r e mov e th e TV from th e wall p lat e, un se cur e th e locking tab (T).5 Adjust Up / Down Tilt TensionLoo se n th e tilt t e n s ion nut to adju s t th e tilt of your TV. Tight e nth e tilt t e n s ion nut wh e n your TV i s se t to th e d es ir e d tilt.Mil es ton e AV T e chnologi es and it s affi liat e d cor p oration s and s ub s idiari es (coll e ctiv e ly, “Mil es ton e”), int e nd to mak e thi s manual accurat e and com p l e t e. How e v e r, Mil es ton e mak es no claim that th e information contain e d h e r e in cov e r s all d e tail s, condition s, or variation s. Nor do es it p rovid e for e v e ry p o ss ibl e conting e ncy in conn e ction with th e in s tallation or u se of thi s p roduct. Th e information contain e d in thi s docum e nt i s s ubj e ct to chang e without notic e or obligation of any kind. Mil es ton e mak es no r ep r ese ntation of warranty, e x p r esse d or im p li e d, r e garding th e information contain e d h e r e in. Mil es ton e a ss um es no r esp on s ibility for accuracy, com p l e t e n ess or s uffi ci e ncy of th e information contain e d in thi s docum e nt.。

VERTEX STANDARD VX-5500 操作说明书

VX-5500O PERATING M ANUALVERTEX STANDARD CO., LTD.4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, JapanVERTEX STANDARDUS Headquarters10900 Walker Street, Cypress, CA 90630, U.S.A.International Division8350 N.W. 52nd Terrace, Suite 201, Miami, FL 33166, U.S.A.YAESU EUROPE B.V.P.O. Box 75525, 1118 ZN Schiphol, The NetherlandsYAESU UK LTD.Unit 12, Sun Valley Business Park, Winnall CloseWinchester, Hampshire, SO23 0LB, U.K.VERTEX STANDARD HK LTD.Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,Kwun Tong, Kowloon, Hong KongCongratulations!You now have at your fingertips a valuable communications tool - a two-wayradio! Rugged, reliable and easy to use, your radio will keep you in constanttouch with your colleagues for years to come, with negligible maintenance down time. Please take a few minutes to read this manual carefully. The information presented here will allow you to derive maximum performance from your radio. After reading it, keep the manual handy for quick reference, in case questions arise later on.We’re glad you joined the team. Call on us any time, because our business iscommunications. Let us help you get your message across.NOTICEThere are no user-serviceable points inside this transceiver. All service jobs must be referred to your Authorized Service Center or Network Administrator.Safety / Warning InformationWARNING - DO NOT operate the VX-5500V radio when someone (bystanders) outside the vehicle is within following range.Safety Training information:Antennas used for this transmitter must not exceed an antenna gain of 0 dBd. The radio must be used in vehicle-mount configurations with a maximum operating duty factor not exceeding 50%, in typical Push-to-Talk configurations.This radio is restricted to occupational use, work related operations only where the radio operator must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distance of following range.Failure to observe these restrictions will result in exceeding the FCC RF exposure limits.Antenna Installation:For rear deck trunk installation, the antenna must be located at least the following range away from rear seat passengers and bystanders in order to comply with the FCC RF exposure requirements.For roof top installation, the antenna must be placed in the center of the roof.Radiated frequency and DistanceVX-5500V (C)1.97 Feet(0.6 m)VX-5500 Operating ManualThe VX-5500 Series are full-featured FM transceivers designed for flexible mobile and base station business communications in the VHF (50/10 Watts: programmable) Land Mobile Bands. Each model is designed for reliable business communications in a wide variety of applications, with a wide range of operating capability provided by its leading-edge design.The 250-channels memories can each be programmed with a 8-character channel name.Important channel frequency data is stored in EEPROM and flash memory on the CPU, and is easily programmable by dealers using a personal computer and the VERTEX STAN-DARD CT-71 Programming Cable and CE49 Software.The pages which follow will detail the many advanced features provided on the VX-5500 transceiver. After reading this manual, you may wish to consult with your Network Ad-ministrator regarding precise details of the configuration of this equipment for use in your application.Front PanelÀPOWER BottonPress the button to turn the transceiver ON and OFF.ÁTX IndicatorThis lamp glows red when the radio is transmitting.ÂBUSY IndicatorThis lamp glows green when the channel is busy.ÃLiquid Crystal DisplayThe display include an 8-character alpha-numeric section showing channel and group names, status and identity information, and error messages. Additional indicators onthe display show priority channel assignments and scan include / exclude selection.“S PEAKER” List “OÄp/q ButtonPressing these buttons changes the current group (and displayed group number or name). Holding this button for more than 1/2 second causes the function to repeat.ÅSQC IndicatorThis lamp glows orange when incorrect position at the setting of CE49.ÆProgrammable Function Button (PF button)This button can be set up for special applications, such as high/low power selection, monitor, dimmer, talk-around, and call alert function, as determined by your network requirements and programmed by your VERTEX STANDARD dealer.ÇVOLUME KnobThis knob sets the volume of the receiver.ÈEMERGENCY MicrophoneThe emergency microphone is located behind this small slit. When the emergency feature is activated, this Microphone is enabled.ÉCHANNEL Selector KnobThis knob select the operating channel.Programmable Function Button (PF button)This button can be set up for special applications, such as high/low power selection, monitor, dimmer, talk-around, and call alert function, as determined by your network requirements and programmed by your VERTEX STANDARD dealer.Side PanelMicrophone Jack (It is on both sides.)Connect the microphone plug to this jack.REAR (Heatsink)ÀAntenna SocketThe 50-ohm coaxial feedline to the antenna must be connected here, using a type-M (PL-259) plug.ÁExternal Speaker JackAn external loudspeaker may be connected to this 2-contact, 3.5-mm mini-phone jack.Caution: Do not connect this line to ground, and be certain that the speaker has adequate capability to handle the audio output from the VX-5500.Â13.8-V DC Cable Pigtail w/ConnectorThe supplied DC power cable must be connected to this 2-pin connector. Use only the supplied fused cable, extended if necessary, for power connection.ÃDSUB 25-Pin Accessory ConnectorExternal TX audio line input, PTT (Push To Talk), Squelch, and external RX audio line output signal may be obtained from this connector for use with accessories such as data transmission/reception modems, ets.B ASIC O PERATION OF THE T RANSCEIVER Important! - Before turning on the radio the first time, confirm that the power connec-tions have been made correctly and that a proper antenna is connected to the antenna jack. Switching Power ON/OFFPush the POWER switch turn on the radio. The display will become illuminated. The radio will start up on the last channel used prior to shut-down during the previous operating session.Turn the CHANNEL selector knob to choose the desired operating channel. A chan-nel name will appear on the display. If you want to select the operating channel from a different Memory Channel Group, press the UP (p) or DOWN (q) button to select the Memory Channel Group you want before selecting the operating channel. Setting the VolumeTurn the VOLUME knob clockwise to increase the volume, and counterclockwise to decrease it. If no signal is present, press and hold in the MON button more than 1/2 seconds; background noise will now be heard, and you may use this to set the VOL-UME knob for the desired audio level. Press and hold the MON button more than 1/2 seconds to quiet the noise and resume normal (quiet) monitoring. TransmittingTo transmit, wait until the “BUSY” indicator is off (the channel is not in use), and press the PTT (Push-To-Talk) switch on the side of the microphone (the “TX” indica-tor will appear or the “TX” indicator will glow red). While holding in the PTT switch, speak across the face of the microphone in a clear, normal voice level, and then release the PTT switch to receive.Selecting Groups and Channelsm Press the UP (p) or DOWN (q) button (repeatedly, if necessary) to select a different group of channels.m Turn the CHANNEL selector knob to select a different channel within the current group.Automatic Time-Out TimerIf the selected channel has been programmed for automatic time-out, you must limit the length of each transmission. While transmitting, a beep will sound five seconds before time-out. Another beep will sound just before the deadline; the “TX” indicator will disappear and transmission will cease soon thereafter. To resume transmitting, you must release the PTT and wait for the “penalty timer” to expire (if you press the PTT before this timer expires, the timer restarts, and you will have to wait another “penalty” period)Programmable Function Button (PF button)The VX-5500 includes the seven Programmable Function Buttons (PF button). The PF button functions can be customized, via programming by your VERTEX STAN-DARD dealer, to meet your communications/network requirements. Some features may require the purchase and installation of optional internal accessories. The possible PF button programming features are illustrated at the below, and their functions are explained on page 8.For further details, contact your VERTEX STANDARD dealer. For future reference, check the box next to each function that has been assigned to the PF button on your particular radio, and keep it handy.* requires RMK-4000 ** requires Encryption UnitChannel ScanThe Scanning feature is used to monitor multiple signals programmed into the trans-ceiver. While scanning, the transceiver will check each channel for the presence of a signal, and will stop on a channel if a signal is present.To activate scanning:m Press the assigned PF button of the “Scan” momentarily to activate scanning.m The scanner will search the channels, looking for active ones; it will pause each time it finds a channel on which someone is speaking.To stop scanningm Press the assigned PF button of the “Scan”.m Operation will revert to the channel to which the CHANNEL selector knob is set.Note:Your dealer may have programmed your radio to stay on one of the following channels if you press the PTT switch during scanning pause:r Current channel (“Talk Back”)r“Last Busy” channelr“Priority” channelr“Home” channelr“Scan Start” channelDual WatchThe Dual Watch feature is similar to the Scan feature, except that only two channels are monitored:r The current operating channel; andr The “Priority” channel.To activate Dual Watch:m Press the assigned PF button of the “Dual Watch”.m The scanner will search the two channels; it will pause each time it finds a channel on which someone is speaking.To stop Dual Watch:m Press the assigned PF button of the “Dual Watch”.m Operation will revert to the channel to which the CHANNEL selector knob is set.ARTS (Auto Range Transpond System)This system is designed to inform you when you and another ARTS-equipped station are within communication range.During ARTS operation, your radio automatically transmits for about 1 second every 25 (or 55) seconds (the interval is programmed by Dealer) in an attempt to Shake hands with the other station.If you move out of range for more than one minutes, your radio senses that no signal has been received, a ringing beeper will sound. If you subsequently move back into range, as soon as the other station transmits, your beeper will sound.The PF Button FunctionThe PF (Programmable Function) button can be programmed by the dealer to provide two of the other functions described below.To activate the primary Accessory function, press the PF button momentarily. To access the secondary Accessory function (which may include the Alarm), press and hold the PF button for 1.5 seconds or longer.Call/ResetWhen this feature is programmed and a selective call has been received, momen-tarily press the assigned PF button of the “Call/Reset” to reset the flashing indicator and mute the receiver, otherwise press the assigned PF button of the “Call/Reset” to sent your radio’s identification code (ANI) to the dispatcher.Talk-AroundThe feature causes the assigned PF button of the “Talk-Around” to select simplex operation on semi-duplex channels: the transmit frequency becomes the same as the receive frequency (regardless of any programmed offset for the channel).Note:This feature has no effect on simplex channels. After pressing the button,“-TAKARD-” is displayed on the LCD.Alpha NumericPress the assigned PF button of the “Alpha Numeric” to switch the display between the Group/Channel number, and the Group/Channel name (alphanumeric). A tone will sound each time you switch between numerical and alphanumerical display.DIMPress the assigned PF button of the “DIM” to adjust the brightness of the display and key backright.EMG (Emergency)Press the assigned PF button of the “EMG” to initiate an emergency call (requires ANI board). When an emergency call is made, not tone is emitted and the display does not change. To end the emergency call, turn the transceiver power OFF.HA (Horn Alert)Press the assigned PF button of the “HA” to turn the Horn Alert function ON or OFF. If you receive a call from the base station with 2Tone or DTMF signaling, horn alert will activate.” appears on the display. Home (Home Channel)Press the assigned PF button of the “Home” to select the pre-programmed Home Channel. Press it again to return to the previous channel. If used while scanning, pressing this key a second time will change to the revert channel.IC (Intercom)This feature requires dual head configuration. Press the assigned PF button of the “IC” to turn the intercom feature ON or OFF. While ON, you can press the PTTLow PowerPress the assigned PF button of the “Low Power” to set the radio's transmitter to the “Low Power” mode.Press this key again to return to “High Power” operation when in difficult terrain. GRP UP/DWNPress the assigned PF button of the “GRP UP” or “GRP DWN” to select a different group of channels.CH UP/DWNPress the assigned PF button of the “CH UP” or “CH DWN” to select a different channel within the current group.AUX A/B/CPress the assigned PF button of the “AUX A”, “AUX B”, or “AUX C” to turn the output port (respectively).PA (Public Address)Press the assigned PF button of the “PAMONI (Monitor)Press the assigned PF button of the “MONI” momentarily to cancel CTCSS and DCS signaling squelch; the “MON” icon appears on the display. Press and hold this key for 1/2 seconds to hear background noise (unmute the audio); the MON icon blinks on the display.RCL (Channel Recall)During scan, you can press the assigned PF button of the “RCL” to select the last called channel.ST (Selectable Tone)Press the assigned PF button of the “Selectable Tone”, then rotate the CHANNEL selector knob to select a 2-Tone.SPPress the assigned PF button of the “SPa call. However, all audio will be emitted from the PA speaker.SQL (Squelch Level)You can manually adjust the squelch level using this function:1. Press the assigned PF button of the “SQL”. A tone sounds and SQL appears onthe display with the current squelch level.2. Rotate the CHANNEL selector knob to select the desired level.3. Press the this key. A tone sounds and the display returns to the normal channel. COMP (Compander)Press the PF button assigned to the “COMP” function to turn the “Compander” IC ON or OFF.This IC contains two variable gain circuits configured for compressing and expand-ing the dynamic range of the radio's transmitted and received audio signal.When you enable this function, the signal-to-noise radio can be improved by reduc-ing the transmitted audio dynamic range.Encryption (Option)When the Voice Scrambler feature is enabled, pressing the assigned PF button of the “Encryption” toggles the Scrambler on and off.O PTIONAL A CCESSORIESMH-25B7A MicrophoneMH-53C7A Heavy Duty MicrophoneMH-53A7A Heavy Duty Microphone w/Noise CancelerMH-53B7A Heavy Duty DTMF Microphone w/Noise CancelerCE49Programming SoftwareCT-70Radio Programming Cable (Requires VPL-1)CT-71Radio to PC Programming CableCT-72Radio to Radio Programming CableCT-81Cable for RMK-4000 (6 m)CT-82Cable for RMK-4000 (2.5 m)CT-83Cable for RMK-4000 (0.6 m)CNT-6000Control HeadRF DECK RF Deck w/MMB-79 (for Dual Band Installations) RMK-4000SH Remote Kit (for Single Transceiver)RMK-4000DH Remote Kit (for Dual-Head Installations)RMK-4000DB Remote Kit (for Dual Band Installations)RMK-4000DBH Remote Kit (for Dual Band plus Dual Head Installations) F2D-82-Tone Decode Unit (Requires FIF-7)F5D-145-Tone ENC-DEC Unit (Requires FIF-7)VTP-50VX-Trunk Unit (Requires FIF-7)FVP-25Encryption/DTMF pager Unit (Requires FIF-7)FP-1030External 30A Power SupplyMLS-100Mobile Loud speaker (12 W Peak Power)MMB-79Mobile Mounting BracketMMB-77Locking Mobile Mounting BracketFIF-7Inter face Board (for F2D-8, F5D-14, VTP-50, FVP-25) CN-6Inter face Board (for Accessories)Note:This device complies with Part 15 of the FCC rules.Operation is subject to the condition that this device does not cause harmful interference.Part 15.21: Changes or modifications to this device not expressly ap-proved by Vertex Standard could void the user’s authorization to oper-Copyright 2003VERTEX STANDARD CO., LTD. All rights reservedNo portion of this manualmay be reproduced withoutthe permission ofVERTEX STANDARD CO., LTD. Printed in Japan.。

美国25大玩具零售商排行榜

美国25大玩具零售商排行榜
dana Frcnch;赵明（译）
【期刊名称】《中外玩具制造》
【年(卷),期】2008(000)002
【摘要】美国是我国最大的玩具出口市场，我们通过美国玩具杂志《Playthings》一系列的数据及分析，看到美国玩具、游戏以及儿童娱乐产品销售中哪个是最大的赢家，看到行业的走势。

【总页数】3页(P68-70)
【作者】dana Frcnch;赵明（译）
【作者单位】无
【正文语种】中文
【中图分类】TS958
【相关文献】
1.美国25大玩具零售商销售调查 [J], Dana French;文志君（编译）
2.美国25大玩具零售商排名 [J],
3.英国玩具零售商担心圣诞期间玩具短缺 [J],
4.专题：零售商品牌与生产商品牌的博弈——零售商品牌与生产商品牌在美国生活用纸市场中的竞争 [J],
5.美国25大玩具零售商年度调查显示传统玩具不敌电玩产品 [J], Dana French;
文志君
因版权原因，仅展示原文概要，查看原文内容请购买。

美国五金产品的设计新潮

美国五金产品的设计新潮
佚名
【期刊名称】《质量技术监督研究》
【年(卷),期】1995(000)006
【摘要】一般美国人喜爱自己动手建造、维修房舍,常常自己购买各种五金产品,因此美国五金市场需求始终保持稳定,而五金工具产品也朝向设计理想化、使用人性化、性别平等化的趋势发展。

【总页数】1页(P29-29)
【正文语种】中文
【中图分类】F416.8
【相关文献】
1.从工业设计的角度论五金产品的设计 [J], 杜忠友
2.再论工业设计角度的五金产品设计 [J], 杜忠友
3.工作空间大不同——2016年美国芝加哥NeoCon看商业室内设计新潮流 [J],
4.美国住宅设计的新潮流 [J], 周家高;
5.美国新英格兰地区五金产品市场调研报告 [J], 无
因版权原因，仅展示原文概要，查看原文内容请购买。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

The University of Chicago Booth School of Business
1.Overview
基本情况一览表
成立时间1890年
学校类型私立
学校昵称Maroons
教师人数2,160
学生人数本科生：4,391人
研究生：9,110人
所在地点伊利诺伊州，芝加哥
芝加哥大学创立于 1890，其商学院成立于 1898 年，是美国第二悠久的商学院。

布斯商学院首先于 1920 年开办管理学博士项目。

2008年11月芝加哥大学商学院正式将学院改名为芝加哥大学布斯商学院（University of Chicago Booth School of Business）。

此次更名是为了纪念“有效市场假说”创立者尤金•法玛的弟子、芝大商学院校友大卫•布斯(David Booth)于2008年11月6日捐赠3亿美元。

2.School Surroundings
位于美国中西部伊利诺伊州的芝加哥是西部最大的城市，全美人口第三大城市（仅次于纽约和洛杉矶）。

芝加哥同样也是美国主要的金融、文化、制造业、期货和商品交易中心之一。

近代第一个期货交易所，芝加哥期货交易所，就位于市中心。

芝加哥大学主校区位于芝加哥市区南面的“Hyde Park”社区，其很多教学楼本身就很有建筑美感，值得参观。

主校区附近本来有家OBAMA 推荐的餐馆Dixie Kitchen（Barack Obama Special）。

芝加哥华人数量虽然不如加州那么多，但是也有自己的中国城。

从芝加哥大学主校区开车到中国城大约 15- 20 分钟。

3.School Features
4.2010 Admissions /offers
5.MBA data
US News Rank 5 Average salary and bonus $126,779
FT Rank 12 Employed rate at graduation 75.80%
BW Rank 1 International student% 33% Tuition and Fee (per
$50,900 Financial Aid n/a
year)
Enrollment(full-time) 1,177 Class size Core:61
Elective:47
5
Average GPA 3.52 Average Work
Experience(year)
Average GMAT 715 Mean Age 28
$77,030.00 Acceptance rate 22.30% Recommended annual budget
(Nonresident)
6.Tips for applicants
7.Tips for international students
若想查看详细完整信息，请点击：/bbs/viewthread.php?tid=421379&extra=page%3D1 %26amp%3Bfilter%3Dtype%26amp%3Btypeid%3D122。