ZL50E轮式装载机基本参数(精)

ZL50E轮式装载机基本参数

ZL50E WHEEL LOADER SPECIFICATIONS

发动机型号…………………………………………………………..WD615.67G3-36

D6114ZGB Engine Model

功率（kW/PS）……………………………………………………………162/160 Power

额定转速（r/min） (2200)

Rated Revolution

额定载重量（t） (5)

Rated Load Weight

最大卸载高度（mm）（斗尖/斗刃）………………………………………2990/3104 Max. Dump Clearance （Up to Tip/Up to Edge）

最大卸载距离（mm）（斗尖） (1220)

Max. Dump Reach （Up to Tip）

最高行驶车速（km/h） (36)

Max. Travel Speed

最小转弯半径(mm) (6520)

Min. Turning Radius

最大牵引力（KN） (165)

Max. Traction Force

工作装置动作时间（三项和）（s）……………………………………………12.5 Hydraulic cycle time (Total)

额定斗容（m3） (3)

Rated Bucket Capacity

掘起力（kN） (180)

Breakout Force

总长度（mm） (8250)

Overall Length

总宽度（mm） (3000)

Overall Width

总高度（mm） (3520)

Overall Height

操作重量（t）………………………………………………………………. 16.2 Operating Weight

特点

Features:

发动机

本机采用斯太尔WD615.67G3-36发动机，或可选配上柴D6114，动力强劲Optional Engine Steyr diesel engine WD615.67G3-36, and Shanghai

diesel engine D6114.

变速系吸收了卡特技术的双涡轮液力变矩器，动力换档变速箱，结构紧凑，高效、可靠，操纵方便；主要轴承采用进口件；

Power Train Twin turbine torque converter, manufactured by Cheng Gong and employing CAT technology, and power shift

transmission which features compact structure, high

efficiency, reliable performance, and operational ease. The

key bearings are imported.

驱动桥采用技术成熟的、性能优良的成工50桥，承载能力大，可靠性高；

关键密封件采用进口产品；

Axles Heavy duty and reliable axles designed with advanced Cheng Gong Series 50 axle technology. Key seals are imported.

液压系统全液压转向系统，操纵轻便灵活，性能可靠。流体连接件采用国

内知名品牌，密封可靠，管路系统寿命高；采用PERMCO的泵；Hydraulic System Full hydraulic steering system with operational ease

and high efficiency. Well known hydraulic fluid

connections with reliable seals ensure long service

life of line system. PERMCO pumps used.

工作装置工作装置优化设计的Z型连杆机构，掘起力大，作业效率高，循环时间短；斗容大，卸载高度、卸载距离大，适合更大范围的需求；

其销轴采用防尘结构设计，延长了使用寿命，缩短了维修周期。Implement Optimally designed Z-bar linkage mechanism with large breakout force, high efficiency, short cycle time, large

dump clearance and reach, and suitable for a wide variety

of applications. Dust proof pins ensure its long service

life.

驾驶室符合人机工程的驾驶室，密闭、隔热、减震，降噪，操纵舒适，视野广阔；

Cab Ergonomically designed for total control and comfort with impressive panoramic visibility. It features heat insulation,

shock absorption, and low noise level.

车架四板塔型前车架与箱型后车架为主机提供了坚实的受力基础，上下铰接间距大，采用圆锥滚子轴承，寿命长；整机稳定性好；Frame Heavy-duty front frame with four-plate loader tower and rear frame with special box-section structure provides strength and

large load capacity. It features long upper and lower hitch

distance, cone bearing which ensure extended service life, and