VSP [5.X] - Products Overview

合集下载

Product_Overview_by_Linglin

NEXUS
Target voltage 1.8 .. 3.6 V 600 MHz effective sample rate Supports Embedded Trace
Macrocell (ETM)
Supports Program Trace Macrocell
(PTM)
Support of High-Speed Serial Trace Port Compatible to Xilinx Aurora protocol Support of up to four differential lanes Maximum 6,25Gbit/s lane speed Up to 24 Giga CPU cycles

Support for ARM/CORTEX, PIC32, X-GOLD110, X-GOLD102 ACTEL, ARM, ATMEL, CYPRESS, ENERGYMICRO, FREESCALE, FUJITSU, INFINEON, LUMINARYMICRO, MICROCHIP, MIPS, NXP, SAMSUNG, STM, TI, TOSHIBA
Export Form 2011▪ Linglin He ▪ 2011/ August / 18
▪ 5
Products
Power Debugger
Debug Cable
Processor specific adaption Contains software license Supported Processor Families: ARM/XSCALE Power Architecture MIPS32/MIPS64 Intel Atom™/x86 78K0R/RL78 APS AVR32 C166CBC CPU32 ColdFire H8S/23x9 M32R M-Core MCS08 MSP430 RX S12X SH TriCore V850 VR XC2000/C166SV2 XC800 DSPs Softcores Configurable Cores Auxiliary Processors

VSP - DV (Desktop Virtualization 5)

VMware EUC Solutions OverviewQ:Amway wanted to offshore its financial operations to reduce costs while providing a solid end-user experience. Which solution would best address their business challenges?A:Mobile Secure WorkplaceAlwaysOn WorkplaceBranch Office DesktopBusiness Process DesktopQ:Which of the following are business problems that can be solved using the Mobile Secure Workplace architecture? (Check all that apply)A:Improvement of user access by providing mobility with a native desktop experienceAbility to centrally provision, upgrade and troubleshoot end-user devicesIT organizations can set granular policy around applications and networksStreamlining of common management tasks through a single admin consoleQ:Read the following description and match it to the VWware product below: “This product provides management, monitoring and a single dashboard for IT to oversee the complete environment, even when i t’s spread across multiple sites.”A:vCloud DirectorvCloud ConnectorvCenter Configuration ManagervCloud Automation CenterQ:HBF Insurance wanted to drive down the costs of break-fix support across their distributed sites and support a green initiative by reducing their CO2 footprint. Which solution was leveraged to address their requirements? (Choose one)A:Mobile Secure WorkplaceAlwaysOn WorkplaceBusiness Process DesktopBranch Office DesktopQ:Which of the following VMware products can be incorporated into the Branch Office Desktop solutionto provide additional levels of functionality? (Check all that apply)A:Horizon ViewvCloud Networking and SecurityvCloud Configuration ManagervCenter Operations ManagerQ:Which of the following are the solutions that fulfill the VMware EUC vision? (Check all that apply)A:AlwaysOn WorkplaceHorizon WorkspaceMobile Secure WorkplaceBusiness Process DesktopHorizon MirageBranch Office DesktopHorizon ViewQ:Foley & Lardner implemented their desktop-as-a service initiative by leveraging which of the following solutions? (Choose one)A:Mobile Secure WorkplaceAlwaysOn WorkplaceBusiness Process DesktopBranch Office DesktopQ:The Mobile Secure Workplace solution incorporates which of the following VMware products? (Check all that apply)A:vCenter ProtectHorizon ViewvCloud Networking and SecurityvCenter Operations ManagerQ:Which of the following are the core features in every VMware End User Computing solution? (Check all that apply)A:Data securityDisaster recoveryVirus protectionServer consolidationNetwork securityQ:The VMware Business Process Desktop specifically provides a set of managed services to maximize the productivity of which of the following types of workers? (Check all that apply)A:Offshore developersFinancial analystsCall center agentsHealthcare back-office workersVMware EUC WhiteboardQ:What statistic represents data loss or security breaches and should be customized to fit the prospect’s organizational size? ( Choose the best answer.)A:5.5 M66%65+ M330KQ:Which discovery question would be an effective follow-up questio n to learn more about the prospect’s Applications? (Choose the best answer.)A:What legacy, SaaS, browser-based and mobile applications are you running in your environment today?What are the compliance mandates for data management that you are required to adhere to in your industry or in your company?What is your policy for corporate and personal devices?Q:The third stage of the EUC Whiteboard is to: (Choose the best answer.)A:Discuss how VMware has helped organizations meet strategic objectivesUncover the current state of the applications, data and devices in their environmentEstablish industry knowledgeUnderstand the organization’s current initiatives and strategies to meet those objectivesQ:The second stage of the EUC Whiteboard is to: (Choose the best answer.)A:Discuss how VMware has helped organizations meet strategic objectivesUncover the current state of the applications, data and devices in their environmentEstablish industry knowledgeUnderstand the organization’s current initiatives and strategies to meet those objectivesQ:The first stage of the EUC Whiteboard is to: (Choose the best answer.)A:Discuss how VMware has helped organizations meet strategic objectivesUncover the current state of the applications, data and devices in their environmentEstablish industry knowledgeUnderstand the organization’s current initiatives and strategies to meet those objectivesQ:In the EUC Whiteboard, how are Apps,Data, and Devices represented? (Choose the best answer.) A:Three circles interconnected (Venn Diagram)Three triangles in a rowStacked column split in threeQ:What is the purpose of the EUC Whiteboard? (Choose the best answer.)A:Discovery tool to uncover EUC opportunitiesVMware corporate presentationPresentation to detail the VMware EUC portfolioQ:The final stage of the EUC Whiteboard is to: (Choose the best answer.)A:Discuss how VMware has helped organizations meet their strategic objectivesUncover the current state of the applications, data and devices in their environmentEstablish industry knowledgeUnderstand the organization’s current initiatives and strategies to meet those objectivesVSP Desktop - Head of IT DiscoveryQ:Which of the following are primary security and compliance concerns for IT executives? (Select two.) A:Protecting intellectual propertyUnleveraged capacityLegal protectionObsolete devicesQ:Which responsibilities are commonly part of the Head of IT’s role? (Select two.)A:34/14Maintaining infrastructureDesigning network architectureDeveloping business applicationsManaging the client architectureQ:Match the following discovery question to a sales opportunity below: “What are your plans to suppo rt BYOD initatives?” (Choose the best answer.)A:Resource constraint / OpEx reduction initiativesSecurity and compliance mandatesWorkforce or business transformation initiativesQ:Which of the following actions are important during preparation for a discovery conversation? (Select two.)A:Memorizing specifications for handheld technologyPerforming research on the account you are targetingDeveloping high-level discovery questions to begin the conversationDetermining the exact devices used in the target businessQ:What roles are part of the Head of IT’s circle of influence? (Choose the best answer.)A:CIOExecutive userDirector of EUCLead ArchitectQ:Which of the following are trigger words that can alert you to business transformation initiatives that present sales opportunities? (Select two.)A:Compliance mandateOutsourcing workforceBYOD initiativeBreak fix issuesOS refresh schedulesQ:What external research resource provides insights of concerns raised by executives, analysts and investors for discovery discussion preparation? (Choose the best answer.)A:SalesPRISMValuePrompter for MSWEarnings call transcriptsCompany websiteQ:Which of the following are common critical business issues for the Head of IT? (Select three.)A:134/124/123Maintaining and exceeding service expectationsManaging costsMaintaining flexibility while ensuring security and complianceDeveloping applications for the businessQ:Which of the following initiatives present sales opportunities for VMware? (Select three.)A:Workforce or business transformationCapEx reductionIT resource constraints / OpEx reductionSecurity and compliance mandatesQ:Which of the following are trigger words that can alert you to IT resource constraints or OpEx reduction initiatives that present sales opportunities? (Select two.)A:13/14/Regulatory changesBYOD initiativesOS refresh schedulesSupport calls。

VSP_随钻地震地质导向建模技术应用研究

442023年6月上第11期总第407期信息技术与应用China Science & Technology Overview0 引言随着油气勘探开发的不断深入，石油地震勘探目标向尺度小、细、深及复杂特征的趋势发展，高质量勘探开发难度日益加大，若要资源突破，物探先行已成为目前高质量勘探、少井高产和效益开发的主要方法，因此，地震资料处理速度建模技术得到了迅速发展，已经从常规的时间域速度建模向深度域速度建模发展，并研发了地下非均质地层介质的各向异性速度建模，应用国内外很多建模学者正在研究的FWI 全波形反演速度建模。

当前，高精度速度建模还处于瓶颈期，超深层碳酸盐岩地质复杂，速度精度不足导致断裂、缝洞体等成像不清晰、构造归位不准确等问题，FWI 全波形反演速度建模成为其追求的目标，但是由于FWI 建模对资料要求很高，陆上地震超深层勘探目标效果还不显著，所以，要获得更多高品质地震资料，实现“多做物探少打井，打高产井”的目标，迫切需要效率和精度都高的速度建模技术来支撑，保证地震反演速度精度与钻井速度高度一致，再通过高精度成像结果为钻井提供更好的分析资料，实时指导钻井轨迹的调整。

井中地震勘探作为能够快速获得垂向地震剖面和最初了解地下信息的技术，随着采集装备、处理技术的发展，从1917年至今，井中地震勘探技术已经在垂直地震剖面（VSP）基础上形成了零井源距VSP、非零井源距VSP、变井源距VSP、井间地震、三维VSP、随钻地震等系列，成为不可或缺的勘探方法，在油气勘探开发中被广泛应用[1]。

其中，零井源距VSP、非零井源距VSP 被广泛应用于层位与深度标定、速度求取、地震波吸收衰减因子求取和提高分辨率井控处理；随钻导向技术逐步用于钻头前地层深度预测、地层压力预测、钻头导向和提高储层钻遇率方面，并与零井源距VSP 一起应用于高精度速度建模，通过获得的高精度速度对地震资料进行高精度成像，从而帮助随钻井调整轨迹方向。

德纳米斯Pro 最高性能，最好的激光系统在世界上致力于工程多应用激光系统说明书

Multi-Application Laser SystemsDynamis ProCommitted to EngineeringThe Highest Performance, Best Made Laser Systems in the WorldKey Benefits:P H igh precision, tissue-selectivetreatmentsP I ntuitive, easy-to-useparameter selectionP B road range of treatmentmodesP I mpressive line of advancedaccessoriesP M inimally invasive, safetreatments, and shortdowntimeP G reat patient comfort andsatisfaction Combining high performance and convenience hand in hand: The Dynamis is a true revenue producer for your practiceD ual Monitor EFC Energy ControlEnsures the precision and consistency of laser outputH igh-Resolution Intuitive GUIEasy-to-use medical illustrationsD ual Wavelength LaserP rovides technology for expanded range of treatmentsDynamis Laser Overview2Rotoflex ArmErgonomically designed forlightweight operationHandpieces and ScannersA complete range for supremeversatilityP reprogrammed ProceduresInstantly gain access to procedures via a large displayW ireless FootswitchOffers easy accessT op-Hat Beam Profile OpticsFor uniform treatments with predictable resultsP roprietary VSP Power SupplyProvides a full spectrum of treatment modes3Table of ContentsDynamis Laser Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Leading Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 More Applications for your Practice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Dynamis Pro System Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Ease of Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Nd:YAG - Ultra Deep Penetration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Versa LP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Vascular Lesions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 FRAC3® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Permanent Hair Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 PIANO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 QCW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Er:YAG - Superior Absorption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 VSP Er:YAG Fractional Treatments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 SMOOTH® Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 FotonaSmooth® Gynecological Treatments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 NightLase® Therapy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Fotona4D® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 TightSculpting® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 SmoothEye™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Nd:YAG Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Er:YAG Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Customize your Possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 World Class Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .394Two complementary wavelengths with proprietary VSP technology Leading TechnologyWavelength (nm)A b s o r p t i o n C o e ﬃc i e n t (1/c m )1000001000010001001010.11064 nm Nd:YAG 2940 nm Er:YAG 50070090011001300150017001900210023002500270029003100Desoxyhemoglobin Oxyhemoglobin Melanin Water At the heart of Dynamis Pro laser system are twocomplementary laser wavelengths, with patented ultraperformance technology: Nd:YAG with the most homogeneouspenetration for effective deep thermal treatments, and Er:YAGwith the highest absorption for ablative and non-ablativesuperficial treatments.Two laser technologies in one advanced system: Er:YAG and Nd:YAGE r :Y A G N d :Y A G MSP FRAC SP LP VLP XLP SMOOTHVERSAPIANO microseconds milliseconds seconds TIMEminutes QCWInnovative pulse modes from patented technologies for higher performance: SMOOTH ®, FRAC3®, PIANO“Best wavelengths “When it comes to patient results, the Dynamis’ Er:YAG and Nd:YAG have proven to be, for me, the best wavelengths to minimize complications and shorten recovery times while providing outstanding clinical results.”— C. Pidal, Argentina A combination of Superior Wavelengths for MostMajor Applications Proprietary VSP Technology for a Broad Range of Treatment Modes6Er:YAGN d :Y A GStandard laser technology Fotona VSP technology0Time (micro seconds)L a s e r p u l s e p o w e r 040080012001600Time (micro seconds)L a s e r p u l s e p o w e r 040080012001600MSP SP LP VLP XLP Slow rise time Long tailFotona ’s VSP technology enables variable pulse durations and shapes (from microseconds to longer than one second) to optimize the effect of the laser on the tissueBoth laser sources feature Fotona’s proprietary VSP (VariableSquare Pulse) technology that enables an unprecedented rangeof treatment modes, from extremely short microsecond pulsesfor intense targeting of selected areas, to very long, sub-second-to-second pulses for gentler bulk tissue treatments.Why an Er:YAG & Nd:YAG laser combination?The Dynamis’ VSP (Variable Square Pulse) Er:YAG laserinherently ablates skin more precisely than other laserwavelengths. Er:YAG energy is highly absorbed in water —the main target chromophore for skin resurfacing — andcan thus vaporize skin with micron–precision and very littlethermal conduction. This keeps undesired effects such ashypopigmentation and persistent erythema, as well as recoverytime, to a minimum. The VSP Er:YAG laser in Dynamis systemscan be accurately tuned from varying “cold” and “hot” ablativeto non–ablative thermal ratios. Full customizability allows you toprecisely attain the clinical outcomes your patients desire.The Nd:YAG laser perfectly complements the Er:YAG laser’sablative action with its ability to penetrate deeply into the skinto create thermal effects without damaging the skin surface.Its homogeneous absorption in the skin and low absorption inmelanin allow it to be safely used on all skin types. Compared toconventional technologies, the VSP Nd:YAG pulses of Dynamislasers create virtually instantaneous FRAC3® temperatureincreases, limited to the targeted structures only.7for your Practice Award-winning, broad range of applications is a uniquely capable and full-featured system offering the power of ultra high performance Er:YAG and Nd:YAG lasers.oagulation of Mucosal Tissueull Beam & Fractional Treatmentsurgical Applications: Laser Lipolysis, Endo8Laser Type Er:YAG Nd:YAG Wavelength2940 nm1064 nmFluence Range0.1 – 95 J/cm210 to 600 J/cm2Pulse repetition rate (frequency) 2 to 50 Hz0.5 to 100 HzPower20 W80 WEnergy 3 J50 JPulse Width Variable with 8 modalities Variable from 0.1 up to 60 sModalities MSP Mode: 100 microsecondsSP Mode: 300 microsecondsLP Mode: 600 microsecondsVLP Mode: 1000 microsecondsXLP Mode: 1500 microsecondsFotona SMOOTH mode: 250 millisecondsV-SMOOTH mode with T-Runner; 125,250, 375, 500 and 625 millisecondsTURBO Mode FRAC3®VERSA PIANO QCWScanner T–Runner, S-Runner, F-Runner L-Runner, S11 Dynamis Pro System Specs“A highly innovative workstation“Fotona’s Dynamis laser is a highly innovative workstation, which represents a complete ablative skin resurfacing solution capable of providing a wide variety of treatment options.”— Ming–Li Tseng, Taiwan9With interactive touch screen and medical illustrationsSelect a wavelength 1Select a group of applications 2P ress ready and work 4 S elect a type of treatment 3Ease of Use10“Effective and reliable“The advantages of the unique characteristics of the Fotona Nd:YAG laser can be summarized as follows: effective, quick, reliable, cost effective, and no unnecessary consumables. Our patients are very satisfied with the treatment because it is safe, effective, quick and easy.”— R. Gansel, GermanyThe Fotona proprietary Nd:YAG laserThe Nd:YAG laser is characterized by its homogeneouspenetration up to 10 millimeters deep and selective absorptionin tissue chromophores.These two features allow Nd:YAG laser light to reach deep skinstructures without damaging the epidermis, regardless of skintype.P H igh pulse rates for enhanced speedP C omputer controlled scanning of up to 62.5 cm 2 areasfor perfect skin coverageP F our different scanning patterns for optimal patientcomfortP F ive different spot sizes for greater treatment precisionL-Runner Nd:YAG Scanner with MatrixView S ™Nd:YAG - for Deep Penetration L-Runner ProFRAC3®, VERSA, PIANO1213Safety and efficacy in a proprietary Fotona millisecond Nd:YAG pulse y o f R . S u l tVersa LPc o u r t e s y o f J . K o z a r e v c o u r t e s y o f R . S u l t c o u r t e s y o f A . Z o r m a n Warts OnychomycosisTeleangiectasiaR33-T with MatrixView TM2–10 mm spot size,Nd:YAG handpiece15Versa LP: The Perfect VascularSolutioncourtesy of R. SultSpider vein removalcourtesy of R. SultSpider vein removalcourtesy of R. SultHemangioma Treatment Vascular Lesions 16FRAC3®Selective targeting of skin imperfectionsFotona's high-performance Nd:YAG laser systems with FRAC3®technology have introduced new standards of efficiency in providing safe and effective hair reduction – using an innovative system that effectively targets hair follicles with a combination of selective and homogenous photothermolysis.MatrixViewN d:YAGHandpiece15–20 mmS11 scannerF RAC3®, VERSA18C o u r t e s y o f R o b i n S u l t , R .N.Permanent Hair Reduction: Eyebrows J a s n a B l a h a , M .D ., M S c .Permanent Hair Reduction: Bikini LineC o u r t e s y o f R o b i n S u l t , R .N .Permanent Hair Reduction: ShoulderSafe for All Skin TypesFotona’s Nd:YAG lasers incorporate revolutionary pulse-control technology and a proprietary three-dimensional treatmentpattern (FRAC3®) to provide safe and effective hair reduction. Unlike other wavelengths, only Nd:YAG is safe to use on all skin types. Fotona’s innovative system effectively targets surfacetreatment areas while leaving surrounding tissues unaffected.The success of hair reduction treatments depends largely on a patient’s skin and hair type, as well as the skills and treatmentinsight of the practitioner. Most patients can expect a significant reduction in unwanted hair, and any future hair growth willusually be thinner and lighter, and thus much less pronounced than before.High-Performance Hair RemovalCombined with the special high-performance L-Runner scanner from Fotona, you can quickly, comfortably and efficiently treat large areas such as the legs, back and chest, makinglaser treatments one of the most cost-effective solutions forlong-term hair reduction. Fotona’s high peak-power laser pulses provide the speed and efficiency needed to uniformly coverlarge scanning areas. Depending on the size of the treatmentarea, between three to five sessions, six to eight weeks apart will lead to a significant aesthetic and clinical result.Fast - Comfortable - Effective 19PIANOBe in tune with PIANO mode R34-T with MatrixView TM 15–20 mm spot size, Nd:YAG handpieceControlled bulk heatingcourtesy of M. TaylorPIANO skin tightening*courtesy of M. TaylorPIANO skin tightening*Interstitial jawline tightening*Laser lipolysisEVLAc o u r t e s y o f C . P id alc o u r t e s y o f R . S u lt c o u r t e s y o f O . M a t y u n inThe Fotona proprietary Er:YAG laserEr:YAGEr:YAG laser utilizes a unique wavelength that is absorbed within a few microns of tissue, thus avoiding any damage to deeper-lying tissues.VSPVSP technology enables the operator to easily adjust the laser treatment modality from micro–short (MSP) to extra–long (XLP) pulses in order to precisely balance the removalof epidermis with thermal effects on collagen.“The Ideal balance between efficiency and downtime, with the lowest risk of PIH“Dynamis Er:YAG is a very effective tool for resurfacing treatments, in terms of the balance between efficiency and downtime, with the lowest risk of PIH (post-inflammatory hyperpigmentation).”— A.S.Lun, Hong KongM e d i u m W a r m P e e lD e e p H o t P e e lS m o o t h H o t M o d eL i g h t C o l d P e e lD e e p C o l d P e e le e lSelection of different availableVSP Er:YAG laser treatment regimesF r a c t i o n a t e d M e d i u m W a r m P e e lF r a c t i o n a t e d D e e p H o t P e e lF r a c t i o n a t e d S m o o t h H o t M o d eF r a c t i o n a t e d L i g h t C o l d P e e lF r a c t i o n a t e d D e e p C o l d P e e lSelection of different available fractional laser treatment regimesEr:YAG - Superior Absorption23Key Benefits:Fractional handpiecesTechnology based on the concept of producing an array of microscopic wounds on the skin surface that are rapidly reepithelialized by the undamaged surrounding tissue, sparing the epidermis in the untreated areas.When less becomes moreF-RunnerP C omputer-controlled scanning 24c o u r t e s y o f F . P a c i o l l aPerioral wrinklesScar resurfacing c o u r t e s y o f A . A uAcne scar resurfacing c o u r t e s y o f U . F l o r i j a n c i cc o u r t e s y b y H . M . O m p a r k a s hScar resurfacingNon–ablative VSP Er:YAG is a unique modality for non–invasive thermal–only treatments.Ideal For Non–Ablative Er:YAG Skin ResurfacingSMOOTH ® Mode enables non-ablative laser skin remodeling based on controlled induction of thermal injury of the collagen while preserving the epidermis. In addition to an immediate effect resulting in the shrinkage of collagen fibers, the initiation of neo-collagenesis occurs causing the generation of newcollagen. The effects result in an overall improvement of laxity and elasticity in the treated tissue.SMOOTH ®ModeA gentle touch with SMOOTH ® ModeLast pulse1stpulsend pulseOptimal sequence of sub–ablative micro pulses SMOOTH Mode pulseThermal non-ablative treatment without any bleeding risk or damage to deeper-lying tissuesSMOOTH ® ModeTreats the skin in a smooth, almost “feather-like” non-ablative manner, without bleeding and with precisely controlled temperature deposition. The optical energy is delivered in a unique, sub-second long pulse sequence which preventstemperature build-up at the surface and achieves homogeneous heating within several hundred micrometers of the tissue.c o u r t e s y o f A . G a s p a rSmoothLiftin ™c o u r t e s y o f A . G a s p a r Skin resurfacingc o u r t e s y o f C . P id a l Skin resurfacingc o u r t e s y o f T . P h i l l i p sSmoothEye ™c o u r t e s y o f J o n g -G u K i mSmoothEye ™26FotonaSmooth®IntimaLase ®A minimally invasive solution forstress urinary incontinenceImproves urethral support by vaginal wallThe treatment works best inmild and moderate stress urinary incontinence patients with very good results in severe stress urinary incontinence as wellIncontiLase®RenovaLase ®Atrophied vaginal mucosaVaginal mucosa after RenovaLase treatmentCourtesy of A. Gasparmixed urinary incontinenceScientific results show great improvements invaginal tightness and sexual gratification.Gynecological treatmentsProlapLase ®A safe and non-invasivetreatment for pelvic organprolapse (POP)Precisely controlled laser-induced photo-thermal effects of the Er:YAG laser in mucosa tissue, stimulating collagenremodeling and the synthesis of new collagen fibers. Shrinkage and tightening of the vaginal canal without removal of any tissue.Suitable also for higher gradeprolapseThe overall impact and burden on the patient’s organism is minimal, as opposed to more invasive classical surgical procedures.28G-RUNNER ™ – FOR AUTOMATED OPERATIONAutomatic delivery of laser energy to the vaginal canalImprovement in accuracy and precision of laser delivery – morehomogenous coverage of vaginal mucosa - better results!Optimized treatment timeIncreased comfort and convenience for the operatorGynecological treatments: 90° angular golden mirrortitanium adapterGynecological treatments: 360° circular golden mirror titanium adapterWired laser speculum R11 full-beam titanium handpiecePS03 patterned titanium handpieceG-SET – INTRAVAGINAL ACCESSORY SETFULL-BEAM AND PATTERNED HANDPIECESZoom optics with spot sizes from 2-7 mmoffers a wide range of treatments Collimated beam enables precise delivery of laser energy Titanium technology ensures robustness and durabilityAdditional handpiece options for cervicaltreatments and soft-tissue cuttingTools for gynecological treatmentsSClear speculumSelection of different available fractional laser treatment regimesG-Runner™ - Fotona’s proprietary scanning technology29Fotona’s NightLase®* therapy is a non-invasive, patient-friendly laser treatment for increasing the quality of a patient’s sleep. NightLase can reduce the effects of and decrease the amplitude of snoring by means of a gentle laser treatment of the mucosa tissue.Simple, Safe and EffectiveFotona’s patented laser modality optimizes the length of laser pulses, allowing for the safe penetration of heat into the oral mucosa tissue. It is gentle enough to be used on the sensitive tissue inside the mouth, but strong enough to provide clinically efficacious heating.With proper training NightLase has a high success rate in producing a positive change in sleep patterns. Research has shown that NightLase can reduce and attenuate snoring, in an effective, non-invasive way.A Patient Friendly SolutionA full course of NightLase consists of three separate treatment sessions over a two-month period. The final results of the treatment have been shown to last up to a year, and the therapy can be repeated.Patients find NightLase to be a highly comfortable and satisfying solution. NightLase requires no device to be worn during sleep and involves no chemical treatment. It’s a gentle and easy way for your patients to regain a good night's rest.Fotona NightLase® Therapy* F otona Dynamis laser system family has been cleared by the US FDA for ENT surgery, intra-oral soft tissue ablation, coagulation,excision and incision, and laser assisted uvulopaletoplasty (LAUP) .30Er:YAG and Nd:YAG Combined TreatmentsSYNERGISTIC TREATMENTS FROM TWO WAVELENGTHS WORKING TOGETHEREnabled by the expanded capabilities of the Nd:YAG and Er:YAG wavelengths, the Dynamis provides up to four dimensions of treatment, including a novelSmoothLiftin™ intraoral laser treatment vector. Fotona’s complementary Er:YAG and Nd:YAG wavelengths are synergistically applied in 4 different modes: SMOOTH ®, FRAC3®, PIANO ® and SupErficial™ to work on deeper, medial and superficial connective structures of the skin, while simultaneously targeting different skin imperfections. Fotona’s 4D laser treatment of both the exterior facial and interior oral cavity enables full–thickness contraction of collagen for persistent, no–downtime tightening and volumization without injectables. Combining these 4 unique modes and two complementary wavelengths results in a respectable facelifting treatment.LA adapter for SmoothLiftin ™ part of Fotona4D®c o u r t e s y o f A . G a s p a rBeforeAfter Fotona4D ® procedureImmediately after SmoothLiftin™ treatment (only right side treated)32Multiple treatment modalities range from the 2–dimensional TwinLight ® procedure to the 4–dimensional Fotona4D ® procedure and unique dual-wavelength, non-invasive TightSculpting ®.LASER BODY SCULPTING AND SKIN TIGHTENING•Dual-wavelength laser procedure combining unique PIANO ® and SMOOTH ® technologies for deep as well as superficial skin tightening and fat reduction• Non-invasive and comfortable procedure with no downtime • Safe and effective on all body areas • No consumables• TightSculpting ® is just one of over 40 applications that are availableon the SP Dynamis platformHIGH PERFORMANCE ACCESSORIES FOR FASTER AND MORE PRECISE TREATMENTSFotona’s innovative MatrixView S TM temperature monitor ensures effective and controlled treatments with ultimate patient comfort and safety. The scanner-supported TightSculpting ® procedure allows for simultaneous large body area treatments using adjustable scanner-area shapes and sizes.33A NON-ABLATIVE FOTONA SMOOTH ® MODE TREATMENT FOR TIGHTENING OF THE PERIOCULAR REGIONSmoothEye TM treatment reduces the appearance of periorbital wrinkles from the inside out, whichsignificantly tightens loose and aging skin of the eyelids and periocular region with little-to-no downtime and maximum patient comfort, making this a very sought after non-invasive cosmetic procedure. After a fewtreatment sessions, the result is improved skin elasticity, overall structure, and volume with significant wrinkle reduction in the periocular region.The PS03 handpiece is a variable spot size handpiece, with fixed pixel-size, independent of the selected spot size. Spot sizes range from 2 to 7 mm with a fixed pixel structure within the laser spot; when the spot size is changed, the number of pixels inside the spot changes.“Before3 weeks after 3rd treatmentSmoothEye™Before and after SmoothEye ™ procedure34C o u r t e s y o fD r .T a n i a P h i l l i p sC o u r t e s y o fD r . P h a m H u u N g h iC o u r t e s y o fD r . J o n g -G u K i mBefore and after SmoothEye ™ procedureAccessoriesMatrixView™S11 scannerNd:YAGSpot size 3,6,9 mmArea 65 mm x 65 mmFrac3®, VERSAR11T-RunnerEr:YAGFull beam Smooth® mode Spot size 4 mmR04Er:YAG PS03PS02Er:YAGS-RunnerEr:YAGFull beamSpot size 4 mmAdjustable 40 mm x 40 mmLA adapterSP Dynamis XS Dynamis SP SpectroWorld Class TrainingThe Laser and Health AcademyThe Laser and Health Academy (LA&HA ®) is a not-for-profit organization dedicated to the promotion of research, education and publishing in the field of laser medicine.Research: LA&HA ® collaborates with industry, medicalprofessionals and universities on projects aimed at the development and improvement of laser applications.Education: LA&HA ® serves as a platform for continuouseducation, with a focus on practical instruction and thedemonstration of laser techniques and procedures, delivered through a variety of workshops and seminars by experienced lecturers./en/journal/to becoming a top laser specialist.live demos and hands-onexplore all areas of medical lasers3911/GNEEC73449For related patents see: /patents。

SuperFlex平台产品培训教学课件

SuperFlex主要参数
792mm
主要性能参数
项目
Hale Waihona Puke 名称型号原理
615mm
最大测试速度首个结果报告时间
试剂
670mm
最小样本量进样模式
加样方式
操作方式
参数
全自动化学发光免疫分析仪 SuperFlex
基于吖啶酯的直接化学发光 50测试/小时 5分钟
单人份一体化试剂条 20ul
样本架：2×12孔，原管上机，急诊优先一次性Tip头
线性范围：0.3-300 ng/mL 样本用量： 50ul
标本类型：血清、血浆（肝素锂）单个报告时间： 13分钟
CKMB
平台优势总结
市场理念：突破传统，引领POCT新时代
原理先进，媲美大型发光吖啶酯直接化学发光专利磁珠
智能化、人性化操控全中文界面高清触摸屏操作一键运行，云端服务
按照应用场景的分类美国国家临床生化科学院
高级阶段广义POCT
小到极致：手持式、手机，手表、蓝牙插件场景扩展：医院外、医院内、临床科、检验科小型平台：自动化、通量、向大发光看齐
即时检测
目前医院内POCT的项目群
血气/电解质
……
血糖监测
血糖（葡萄糖）糖化血红蛋白 ……
感染性疾病
HBV、HCV、HIV、TP 流感……
肉眼判读
量子点时间分辩上转发光.
化学发光
小平台概念-准、小通量、试剂多操作更快捷质控管理
“定性”
“定量”
更好的定量
自动化
小化学发光
未来
基于膜的荧光层析
手持或小仪器单通道
全定量判读
自动化程度

VSM 培训材料

I
1200 L 640 R
ASSEMBLY #2
1
C/T = 40 seconds C/O = 0 Uptime = 100% 2 Shifts 27,600 sec/shift
I
2700 L 1440 R
SHIPPING Staging
加入供方
Michigan Steel Co:
• 星期二一卡车 • 星期四一卡车 • 500英尺钢卷
I
2700 L 1440 R
SHIPPING Staging
ACME 冲压加工
#2点焊 :
• 2 个部件号 • 1 操作者 • 2 班制 • 10 分钟设置 • 46 秒操作时间 • 80% 正常运行使用时间 • 2次休息–每次 10 分钟 • 库存:
- 1100 LH - 600 RH
S.WELD #2
State Street AssemblySS
18,400 pcs/mo - 12,000 lh - 6,400 rh Tray = 20 pcs 2 shifts 920 pcs/day
现在状态图
从顾客开始
State Street Assembly
18,400 pcs/mo - 12,000 LH - 6,400 RH Tray = 20 pcs 2 shifts 920 pcs/day
- 1200 LH - 640 RH
ASSEMBLY #2
1200 L
640 R
1
C/T = 40 seconds C/O = 0 Uptime = 100% 2 Shifts 27,600 sec/shift
当前状态图
State Street Assembly 18,400 pcs/mo - 12,000 LH - 6,400 RH Tray = 20 pcs 2 shifts 920 pcs/day

CTI Cryogenics overview

M-350 P/N 8039194
M-1050 P/N 8004502
© 2015 Brooks Automation, Inc. • Proprietary Information
Single-Stage Cryodyne® Specification
Typical Performance 0 watts @ 30K 10 watts @ 77K 0 watts @ 30K 25 watts @ 77K 0 watts @ 30K 80 watts @ 77K Cooldown Time/minutes 24 to 80K Required Compressor_ 8200
© 2015 Brooks Automation, Inc. • Proprietary Information
Refrigerator Operation
Cycle Begins With Displacer at TDC Inlet Valve Opens Displacer Moves Downward Helium Fills Void
CTI-Cryogenics Product Line Overview
2015 Sept
© 2015 Brooks Automation, Inc. • Proprietary Information
Cryopumps and Cryopump Systems
CTI-Cryogenics®: World leader in cryogenic vacuum technology
© 2015 Brooks Automation, Inc. • Proprietary Information
Refrigerator Operation

质量管理体系术语(中英双语)

一组质量管理体系术语(中英双语)English Chinesereceipt （入厂）接受，验收，进货handling 搬运packaging 包装storage 保存protection 保护comparison 比较identification 标识replacement of identification mark 标识标志更换maintenance of identification 标识的保持records of identification control 标识控制记录tender 标书normative document 标准文件supplemental 补充nonconforming product 不合格品control of nonconforming product 不合格品控制control procedure of nonconforming products 不合格品控制程序tendency of nonconformance 不合格倾向purchasing 采购verification of purchased product 采购的产品验证purchasing process 采购过程purchasing control procedure 采购控制程序purchasing information 采购信息reference standard 参照标准reference instructions 参照细则stockhouse 仓库measurement, analysis and improvement 测量，分析和改进measurement result 测量结果control procedure of monitoring and measuring devices 测量设备控制程序planning 策划preservation of product 产品保护control procedure for maintenance, replacement and records of product identification 产品标识的保持, 更换及记录控制程序procedure for product identification and traceability 产品标识和可追溯性程序conformity of product 产品的符合性monitoring and measurement of product 产品的监督和测量product plan 产品方案control procedure for product preservation 产品防护控制程序method of product release 产品放行方法conformity of product, product conformity 产品符合性product realization 产品实现planning of product realization 产品实现策划product characteristics 产品特性input to product requirements 产品要求的输入product status 产品状态final acceptance of product 产品最后验收procedure 程序program documents 程序文件continual improvement 持续改进procedure for continual improvement of quality management system 持续改进质量体系程序adequacy 充分性storage location 存放地点agency personnel 代理人员submission of tenders 递交标书adjustment 调整，调节statutory and regulatory requirements 法律法规要求rework, vt 返工repair, vt 返修subcontractor 分承包方annex 附录improvement 改进improvement actions 改进措施on-the-job training 岗位技能培训responsibility of individual department and post 各部门, 各岗位职责change identification 更改标记change order number 更改单编号process sheets 工艺单process specification 工艺规程procedure(process card) 工艺规程(工艺卡)process characteristics 工艺特性Job Description Format 工种描述单work environment 工作环境impartiality 公正性functional requirements 功能要求supplier 供方supplier evaluation procedure 供方评价程序supplier provided special processes 供方提供的特殊过程verification at supplier's premises 供方现场验证supply chain 供应链criteria for supplier selection, evaluation and re-evaluation 供应商选择、评估和再评估准则communication 沟通customer 顾客customer property 顾客财产control procedure for customer property 顾客财产控制程序customer feedback 顾客反馈Customer Service Contact Form 顾客服务联系表customer cummunications 顾客沟通customer satisfaction 顾客满意statistical analysis of customer satisfaction 顾客满意度统计分析customer complaint 顾客投诉identificaion of customer requirements 顾客要求的识别management review 管理评审records from management review 管理评审记录management review control procedure 管理评审控制程序management representative 管理者代表management responsibility 管理职责specified limits of acceptability 规定的可接受界限specified use 规定的用途process 过程complexity of processes 过程的复杂性monitoring and measurement of processes 过程的监视和测量operation of process 过程的运行status of processes 过程的状态process approach 过程方法process controls 过程控制process control documents 过程控制文件process performance 过程业绩appropriateness 合适性changes to contractor 合同的更改contract review control procedure 合同评审控制程序internet sales 互联网销售environmental conditions 环境条件monogram pragram requirements 会标纲要要求type of activities 活动类型infrastructure 基础建设infrastructure 基础设施fundamentals and vocabulary 基础与词汇control of records 记录控制technical specificaion 技术规范process trace sheet 加工跟踪单monitoring and measurement 监视和测量monitoring and measuring device 监视和测量装置control of monitoring and measuring devices 监视和测量装置控制check method 检查方法frequency of checks 检查频次calibration status 检定状态inspection and test control procedure 检验和试验控制程序identification procedure for inspection and test status 检验和试验状态标识程序inspection witness point 检验见证点inspection hold point 检验停止点buildings 建筑物delivery 交付post-delivery activities 交付后的活动delivery activities 交付活动interface 接口acceptance of contract or orders 接受合同或定单type of medium 介质类型experience 经验correction action 纠正措施Corrective action response time 纠正措施答复时间，纠正措施响应时间management procedure for corrective actions 纠正措施管理程序corrective action response times 纠正措施响应时间development activity 开发活动traceability mark 可追溯性标志objectivity 客观性Customer Service Log 客户服务记录簿control feature 控制特性，控制细节control features 控制细则periodic assessment of stock 库存定期评估justification 理由routine 例程，惯例，常规质量职能分配表论证范围internal communication 内部沟通internal audit 内部审核internal audit procedure 内部审核程序internally controlled standard 内控标准internal audit 内审results of internal and external audits 内外部审核结果competence 能力training 培训training needs 培训需要evaluate 评价records of the results of the review 评审结果的记录review output 评审输出review input 评审输入Purchase Requisition 请购单authority 权限validation 确认concession 让步human resources 人力资源job training of personnel 人员岗位培训qualification of personnel 人员资格equipment control procedure 设备控制程序device type 设备类型order of design changes 设计更改通知单design and development control procedure 设计和开发控制程序design and development 设计开发design and development planning 设计开发策划control of design and development changes 设计开发更改控制design and development review 设计开发评审design and development validation 设计开发确认design and development outputs 设计开发输出design and development inputs 设计开发输入design and development verification 设计开发验证design validation 设计确认design documentation 设计文件编制design acceptance criteria 设计验收准则design verification 设计验证audit program 审核大纲conduct of audits 审核行为audit criteria 审核准则production process control 生产过程控制production process control procedure 生产过程控制程序production and service provision 生产和服务提供control of production and service provision 生产和服务提供的控制validation of processes for production and service provision 生产和服务提供过程的确认production order 生产令identification and traceability 识别和可追溯性identification and traceability maintenance and replacement 识别和可追溯性维护与替换invalidate 使失效market survey 市场调研suitability 适宜性scope 适用范围controlled condition 受控状态terms and definitions 术语与定义analysis of data 数据分析sequence 顺序transfer of ownership 所有权转移system document 体系文件statistical technique 统计方法outsource(vt) a process 外包过程external source 外部来源documents of external origin 外来文件outsource, vt 外协unique identification 唯一的标识maintenance 维护Document Change Control 文件更改控制Request For Document Change (RDC) 文件更改需求单control of documents 文件控制documentation requirements 文件要求enquiry 问询，询价field nonconformity analysis 现场不符合分析relevance 相关性interaction 相互作用detail design 详细设计，详图设计，零件设计，施工设计sales department 销售部sales contract 销售合同checklist 校验表，一览表，检查一览表calibration 校准submission of action plans 行动计划的递交documented procedures 形成文件的程序documented statement 形成文件的声明performance requirements 性能要求licensee responsibilities 许可证持有者责任acceptance criteria 验收准则verification arrangement 验证安排verification results 验证结果customer focus 以客户为关注点，以客户为焦点awareness 意识introduction 引言，概述，介绍normative references 引用标准application 应用visit to user 用户访问review of requirements related to the product 有关产品的要求评审competent 有能力的effectiveness 有效性determination of requirements related to the product 与产品有关的要求的确定customer-related processes 与顾客有关的过程preventive action 预防措施management procedure for preventive actions 预防措施管理程序planned results 预期的结果intended use 预期的用途procedure for competence, knowledge and training of personnel 员工能力, 知识和培训程序personnel training procedure 员工培训程序supporting services 支持性服务functions 职能部门responsibility 职责assignment of responsibility 职责分工workmanship 制造工艺manufacturing acceptance criteria 制造验收准则quality policy 质量方针quality programs 质量纲领quality management system 质量管理体系quality management system planning 质量管理体系策划performance of the quality management system 质量管理体系业绩quality plan 质量计划quality records 质量记录quality objectives 质量目标quality audit 质量审核quality manual 质量手册quality problem handling form 质量问题处理单quality requirements 质量要求allocation table of quality responsibilities 质量职能分配表availability of resources 资源的可获得性resource management 资源管理allocation of resources 资源配置provision of resources 资源提供general requirements 总要求，一般要求constituent part 组成部件organization 组织continual improvement of the organization 组织的持续改进size of organization 组织的规模Organizational Diagram 组织机构图final acceptance 最终验收work instructions 作业指导书。

地震勘探软件VISTA-英文教程

Elevation/Refraction Statics
Calculate elevation and/or refraction statics for a 3D PreStack data set.
the survey geometr
y
GeoSunTech
the first break picks
f) Save the static values to VISTA header words or output to a statics file. 3. Add the StaticSh command to the flow chart for the brute stack and recompute the brute stack with statics after NMO.
GeoSunTech
Elevation/Refraction Statics
d) Calculate the refraction statics using the
icon.
e) View various quality control displays using the right mouse button menu display.
VISTA 2D/3D Seismic Processing System
In VISTA you will find the most current seismic processing techniques and many new ideas in quality control and quality assurance.
3. Use top menu item Input|Project Data List to open up the Project Data List GeoSunTech

福特性能部件7.3L引擎控制包安装说明书

NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTS © Ford Motor Company 2020TABLE OF CONTENTSSection Topic Page1.0 Introduction 22.0 Overview 23.0 Included Components 2-54.0 Pre-Installation of Harness and Parts 65.0 Controls Pack Harness Installation Instructions7-126.0 Ford Performance Power Distribution Box Installation 127.0 Fuel System138.0 Wire Usage Schematics14-169.0 Fuses & Relays1710.0 Troubleshooting Tips 1711.0 Connector Faces18-2012.0 CAN Message Definition 2113.0 Wiring Schematics (control pack, starter system, PCM pinout) 22-25NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFFORD PERFORMANCE PARTS © Ford Motor Company 2020Suggested Battery Cable DiagramConnect the Battery positive to the starter and alternator.Ground the engine to the chassis.NOTE: Pay close attention to the vehicle grounds. Many times, electrical Issues can be traced back to insufficient ground circuits. Ensuring your vehicle is well grounded now, will save you time and frustration later.BATTERYVEHICLE FUSEBOXENGINECONTROLPACK PDBSTARTER ALTERNATORNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF Figure 1a - 2020 7.3L AUTOMATIC CONTROL PACK MAIN HARNESSNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF C160B inline to C160ANO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFP arameter P CM Units Rate (ms)Rate (Hz)P CM->CAN Conversion Range Resolution Num Bits Offset NotesE NGINE_SP E E D RP M10100None0-163831140E NGINE_SP E E D_HZ Hz10100rpm/60*1000-163.830.011400-9829 RP MAF0A/F10100((lambda * stoic_afr) - 7.0) * 1007-27.470.01117Lambda converted to A/F based on Stoic A/F value AF1A/F10100((lambda * stoic_afr) - 7.0) * 1007-27.470.01117Lambda converted to A/F based on Stoic A/F value Fuel_P ressure Kpa10100psi * 6.894760-511190Rail on P FI/Lift pump on DP FI DI_P ressure Kpa10100psi * 6.894760-327681150Only on DI/DP FI engines BOOST Kpa10100psi * 6.894760-511190Only On boosted engines, positive pressure only VSP D MP H2050mph * 1.609340-409.50.1120MAN_VAC InHg2050((InHg * 3.38639) + 105) * 10-105-409.50.112-105Gauge pressureE CT degF10010(degF - 32) * 5/9-40-21318-40214=degraded, 215=FaultedE OT degF10010(degF - 32) * 5/9-40-21318-40214=degraded, 215=FaultedE OP Kpa100100-10231100VBAT volts10010vbat * 1000-20.470.01110Codes_Count-100100-255180TOT degF10010(degF - 32) * 5/9-40-21318-40214=degraded, 215=Faulted Gear-100100-15140Shifter_P osition-100100-15140NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF150mm To AADatum MAF C160AC175BTo DDPDB 250mm TO GG500mm To BBM6 STUD EYELETMAT SEAL 2 WAY B+ MAINOBD2 bracket with MIL APPSENGINE INLINEC160B PIGTAILM6 NUTM6 WASHERC132AATC1BInline to trans harness450mm TO GG300mm to HHPATS ModuleALT600mmNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFC1AInline to controls packC1571UEGO RH150mm To BC90Trans pocket B C168A BulkheadNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OFNO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF。

VS100 Product Family Datasheet

VS100 Product Family Datasheet
VS100TX, VS100RX – HDBaseT™ Transmitter / Receiver
Ver 2.95ቤተ መጻሕፍቲ ባይዱ
VS100 Product Family Datasheet
Important Notice
This is a version of the VS100 Product Family Datasheet and contains proprietary information on the VS100 product family and is issued for evaluation purposes only. This document may not be photocopied. This document may only be released to companies who have signed a Non-Disclosure Agreement with Valens Semiconductor Ltd. specifically regarding the VS100 product family. Valens reserves the right to make corrections, modifications, enhancements, improvements and other changes to its products and services at any time and to discontinue any product or service without notice. Customers must obtain the latest relevant information before placing orders and must verify that such information is current and complete. All products are sold subject to Valens’s terms and conditions of sale supplied at the time of order acknowledgment. Valens does not warrant performance of its hardware and software products except to the specifications applicable at the time of sale in accordance with Valens’s standard warranty. Testing and other quality control techniques are used to the extent Valens deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. Valens assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using Valens components. To minimize the risks associated with customer products and applications, customers must provide adequate design and operating safeguards. Valens does not warrant or represent that any license, either expressed or implied, is granted under any Valens patent, copyright, mask work right or other Valens intellectual property right relating to any combination, machine or process in which Valens products or services are used. Information published by Valens regarding third-party products or services does not constitute a license from Valens to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party or a license from Valens under the patents or other intellectual property of Valens. Valens products are not designed, intended or authorized for use as components in systems intended for surgical implantation into the body or other applications intended to support life or for any other application in which the failure of the Valens product may result in personal injury or death. Should the Buyer purchase or use Valens products for any such unintended or unauthorized application, the Buyer shall indemnify and not hold responsible Valens and its officers, employees, subsidiaries, affiliates and distributors against all claims, costs, damages and expenses and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Valens was negligent regarding the design or manufacture of the part. Reproduction of information in Valens data books or datasheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. Valens is not responsible or liable for such altered documentation. Resale of Valens products or services with statements different from or beyond the parameters stated by Valens for that product or service voids all express and any implied warranties for the associated Valens product or service and is an unfair and deceptive business practice. Valens is not responsible or liable for any such statements. HDBaseT™ and the Valens logo are trademarks of Valens Semiconductor. All other trademarks are the property of their respective owners. Copyright © 2012, Valens Semiconductor Ltd.

产品名称：Ind REVConnect Core 产品类型：数据线连接器说明书

Compatible with Industrial RevConnect Jacks, Plugs and Couplers
Variants
Item #
Color
RVUIO0UEW-B50 Electric White
Product Notes
Notes:
History
Update and Revision:
Suitable with Solid and Stranded 23 to 24 AWG, UTP and Shielded cables. Insulation O.D. Range 0.035 to 0.055 in., Cable Jacket O.D. Max. 0.370 in. Please see Installation Guide PX106876 and PX106884.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet. The information provided is correct to the best of Belden's knowledge, information and belief at the date of its publication. This information is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. The Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.

Pyxis Lab ST-588 PTSA Fluorescent Polymer Dual Inl

ST-588PTSA/Fluorescent Polymer DualInline SensorUser ManualOctober12,2020Rev.2.00Pyxis Lab,Inc.1729Majestic Dr.Suite5Lafayette,CO80026USA©2017Pyxis Lab,Inc.Pyxis Lab Proprietary and ConfidentialTable of Contents1Introduction21.1Main Features (2)2Specifications3 3Unpacking Instrument43.1Standard Accessories (4)3.2Optional Accessories (5)4Installation64.1ST-588Piping (6)4.2ST-588SS Piping (6)4.3Wiring (7)4.4Connecting via Bluetooth (8)4.5Connecting via USB (8)5Setup and Calibration with uPyxis®Mobile App95.1Download uPyxis®Mobile App (9)5.2Connecting to uPyxis®Mobile App (9)5.3Calibration Screen and Reading (10)5.4Diagnosis Screen (11)5.5Device Info Screen (12)6Setup and Calibration with uPyxis®Desktop App126.1Install uPyxis®Desktop App (12)6.2Connecting to uPyxis®Desktop App (13)6.3Information Screen (13)6.4Calibration Screen (14)6.5Diagnosis Screen (14)7Outputs157.14–20mA Output Setup (15)7.2Communication using Modbus RTU (15)8Sensor Maintenance and Precaution158.1Methods to Cleaning the ST-588 (16)8.2Storage (16)9Troubleshooting17 10Contact Us18Warranty InformationConfidentialityThe information contained in this manual may be confidential and proprietary and is the property of Pyxis Lab,rmation disclosed herein shall not be used to manufacture,construct,or otherwise reproduce the goods rmation disclosed herein shall not be disclosed to others or made public in any manner without the express written consent of Pyxis Lab,Inc.Standard Limited WarrantyPyxis Lab warrants its products for defects in materials and workmanship.Pyxis Lab will,at its option,repair or replace instrument components that prove to be defective with new or remanufactured components (i.e.,equivalent to new).The warranty set forth is exclusive and no other warranty,whether written or oral, is expressed or implied.Warranty TermThe Pyxis warranty term is thirteen(13)months ex-works.In no event shall the standard limited warranty coverage extend beyond thirteen(13)months from original shipment date.Warranty ServiceDamaged or dysfunctional instruments may be returned to Pyxis for repair or replacement.In some in-stances,replacement instruments may be available for short duration loan or lease.Pyxis warrants that any labor services provided shall conform to the reasonable standards of technical com-petency and performance effective at the time of delivery.All service interventions are to be reviewed and authorized as correct and complete at the completion of the service by a customer representative,or des-ignate.Pyxis warrants these services for30days after the authorization and will correct any qualifying deficiency in labor provided that the labor service deficiency is exactly related to the originating event.No other remedy,other than the provision of labor services,may be applicable.Repair components(parts and materials),but not consumables,provided during a repair,or purchased individually,are warranted for90days ex-works for materials and workmanship.In no event will the in-corporation of a warranted repair component into an instrument extend the whole instrument’s warranty beyond its original term.Warranty ShippingA Repair Authorization(RA)Number must be obtained from Pyxis Technical Support before any product can be returned to the factory.Pyxis will pay freight charges to ship replacement or repaired products to the customer.The customer shall pay freight charges for returning products to Pyxis.Any product returned to the factory without an RA number will be returned to the customer.To receive an RMA you can generate a request on our website at https:///request-tech-support/.Pyxis Technical SupportContact Pyxis Technical Support at+1(866)203-8397,*********************,or by filling out a request for support at https:///request-tech-support/.1IntroductionThe Pyxis ST-588inline fluorometer probe simultaneously measures the concentration of PTSA and Fluores-cent Polymer in water.It can be simply inserted to the compression fitting port of a custom-made tee.The standard ST-001installation tee provided with each ST-588sensor,has two¾inch female NPT ports and can be placed to an existing¾inch sample water line.Pyxis Lab also offers2”and3”Tee formats for larger flow installations.The4–20mA current output of the ST-588probe can be connected to any controller that accepts an isolated or non-isolated4–20mA input.The ST-588probe is a smart device.In addition to mea-suring PTSA and Fluorescent Polymer,the ST-588probe has extra photo-electric components that monitor the color and turbidity of the sample water.This extra feature allows automatic color and turbidity com-pensation to eliminate interference commonly associated with real-world waters.The Pyxis ST-588probe has a short fluidic channel and can be easily cleaned.The fluidic and optical ar-rangement of the ST-588probe is designed to overcome shortcomings associated with other fluorometers that have a distal sensor surface or a long,narrow fluidic cell.Traditional inline fluorometers are susceptible to color and turbidity interference and fouling and are difficult to properly clean.1.1Main FeaturesThe ST-588measures PTSA and Fluorescent Polymer in a water sample and includes the following features:•Easy calibration with using uPyxis®Mobile or Desktop App.•Automatic compensation for turbidity up to150NTU and color created by up to10ppm iron or equivalent to10ppm humic acid.•Diagnostic information(probe fouling,color or turbidity over range,failure modes)are available in uPyxis®App or via Modbus RTU.•Easy to remove from the system for cleaning and calibration without the need for any tools.2SpecificationsTable1.ST-588Specifications*With Pyxis’s continuous improvement policy,these specifications are subject to change without notice.†The fluorescent polymer concentration scale is based on the polymer containing0.25mole%fluorescent monomer.Typical polymer specifications are attached below but may vary by producer.‡See Figure4for ST-588SS dimensions.3Unpacking InstrumentRemove the instrument and accessories from the shipping container and inspect each item for any damage that may have occurred during shipping.Verify that all accessory items are included.If any item is missing or damaged,please contact Pyxis Lab Customer Service at*********************.3.1Standard Accessories•Tee Assembly3/4”NPT(1x Tee,O-ring,and Nut)P/N:ST-001*NOTE*ST-001is not included for ST-588SS•8-Pin Female Adapter/Flying Leads Cable(1.5ft)•User Manual available online at https:///support/3.2Optional AccessoriesFigure1.4Installation4.1ST-588PipingThe provided ST-001Tee Assembly can be connected to a pipe system through the3/4”female ports,either socket or NPT threaded.To properly install the ST-588probe into the ST-001Tee Assembly,follow the steps below:1.Insert the provided O-ring into the O-ring groove on the tee.2.Insert the ST-588probe into the tee.3.Tighten the tee nut onto the tee to form a water-tight,compression seal.Figure2.Dimension of the ST-588and the ST-001Tee Assembly(mm)4.2ST-588SS PipingThe ST-588SS probe has3/4”female NPT threaded ports on the probe itself and therefore does not require a custom tee assembly.It is recommended that two3/4”NPT to1/4”tubing adapters are used to connect the probe to the sampling system.Sample water entering the probe must be cooled down to below104°F (40°C).The probe can be held by a1.75-inch pipe clamp or mounted to a panel with four1/4-28bolts.See Figure4for ST-588SS dimensions.Figure3.Dimension of the ST-588SS(inch)4.3WiringIf the power ground terminal and the negative4–20mA terminal in the controller are internally connected (non-isolated4–20mA input),it is unnecessary to connect the4–20mA negative wire(gray)to the4–20mA negative terminal in the controller.If a separate DC power supply other than that from the controller is used,make sure that the output from the power supply is rated for22–26VDC@85mA.*NOTE*The negative24V power terminal(power ground)and the negative4–20mA ter-minal on the ST-588probe are internally connected.Follow the wiring table below to connect the ST-588probe to a controller:Table2.*Internally connected to the power ground4.4Connecting via BluetoothA Bluetooth adapter(P/N:MA-WB)can be used to connect a ST-588probe to a smart phone with the uPyxis®Mobile App or a computer with the uPyxis®Desktop App.Figure4.Bluetooth connection to ST-588probe4.5Connecting via USBA USB-RS485adapter(P/N:MA-485)can be used to connect a ST-588probe to a computer with the uPyxis®Desktop App.*NOTE*Using non-Pyxis USB-RS485adapters may result in permanent damage of the ST-588probe communication hardware.B connection to ST-588probe5Setup and Calibration with uPyxis®Mobile App5.1Download uPyxis®Mobile AppDownload uPyxis®Mobile App from Apple App Store or Google Play.Figure6.5.2Connecting to uPyxis®Mobile AppTurn on Bluetooth on your mobile phone(Do not pair the phone Bluetooth to the ST-588probe).Open uPyxis®Mobile App.Once the app is open the app will start to search for the sensor.Once the uPyxis®Mobile App connects to the sensor,press the ST-588probe.Figure7.5.3Calibration Screen and ReadingWhen connected,the uPyxis®Mobile App will default to the Calibration screen.From the Calibration screen,you can perform calibrations by pressing on Zero Calibration,Slope Calibration,and4–20mA Span for either Fluorescent Polymer or PTSA,independently.Follow the screen instructions for each calibration step.Figure8.5.4Diagnosis ScreenFrom the Diagnosis screen,you can check the diagnosis condition.This feature may be used for technical support when communicating with*********************.To preform a probe cleaniness check,first select the Diagnosis Condition which defines the fluid type that the ST-588probe in currently measuring,then press Cleanliness Check.If the probe is clean,a Clean mes-sage will be shown.If the probe is severely fouled,a Dirty message will be shown.In this case,follow the procedure in the Methods to Cleaning the ST-588section of this manual.Figure9.5.5Device Info ScreenFrom the Device Info screen.You can name the Device or Product as well as set the Modbus address.Figure10.6Setup and Calibration with uPyxis®Desktop App6.1Install uPyxis®Desktop AppDownload the latest version of uPyxis®Desktop software package from:https:///upyxis/this setup package will download and install the Framework4.5(if not previously installed on the PC),the USB driver for the USB-Bluetooth adapter(MA-NEB),the USB-RS485adapter(MA-485),and the main uPyxis®Desktop application.Double click the uPyxis.Setup.exe file to install.Figure11.Click Install to start the installation process.Follow the screen instructions to complete the USB driver and uPyxis®installation.6.2Connecting to uPyxis®Desktop AppWhen the uPyxis®Desktop App opens,click on Device,then click either Connect via USB-Bluetooth or Connect via USB-RS485depending on the connection type.Figure12.6.3Information ScreenOnce connected to the device,a picture of the device will appear on the top left corner of the window and the uPyxis®Desktop App will default to the Information screen.On the Information screen you can set the information description for Device Name,Product Name,and Modbus Address,then click Apply Settings to save.Figure13.6.4Calibration ScreenTo calibrate the device,click on Calibration.On the Calibration screen there are six calibration options:•Fluorescent Polymer:Zero Calibration,Slope Calibration,and4-20mA Span•PTSA:Zero Calibration,Slope Calibration,and4-20mA SpanThe screen also displays the reading of the device.The reading refresh rate is every4seconds.Figure14.6.5Diagnosis ScreenAfter the device has been calibrated and installation has been completed,to check diagnosis,click on Di-agnosis.When in the Diagnosis screen you can view the Diagnosis Condition of the device.This feature may be used for technical support when communicating with*********************.To preform a probe Cleaniness Check,first select the Diagnosis Condition which defines the fluid type that the ST-588probe inCheck.If the probe is clean,a Clean message will be shown.message will be shown.In this case,follow the procedure in theof this manual.Figure15.7Outputs7.14–20mA Output SetupThe4–20mA output of the ST-588sensor is scaled as:•Fluorescent Polymer:–4mA=0ppm–20mA=20ppm•PTSA:–4mA=0ppb–20mA=200ppb7.2Communication using Modbus RTUThe ST-588probe is configured as a Modbus slave device.In addition to the ppm Fluorescent Polymer and ppb PTSA values,many operational parameters,including warning and error messages,are available via a Modbus RTU connection.Contact Pyxis Lab Customer Service(*********************)for more informa-tion.8Sensor Maintenance and PrecautionThe ST-588probe is designed to provide reliable and continuous Fluorescent Polymer and PTSA readings even when installed in moderately contaminated industrial cooling waters.Although the optics are com-pensated for the effects of moderate fouling,heavy fouling will prevent the light from reaching the sensor, resulting in low readings and the potential for product overfeed if the ST-588probe is used as part of an au-tomated control system.When used to control product dosing,it is suggested that the automation system be configured to provide backup to limit potential product overfeed,for example by limiting pump size or duration,or by alarming if the pumping rate exceeds a desired maximum limit.The ST-588probe is designed to be easily removed,inspected,and cleaned if required.It is suggested that the ST-588probe be checked for fouling and cleaned/calibrated on a monthly basis.Heavily contam-inated waters may require more frequent cleanings.Cleaner water sources with less contamination may not require cleaning for several months.The need to clean the ST-588probe can be determined by the Cleanliness Check using either the uPyxis®Mobile App(see the Mobile Diagnosis Screen section)or the uPyxis®Desktop App(see the Desktop Diagnosis Screen section).8.1Methods to Cleaning the ST-588Any equipment in contact with industrial cooling systems is subject to many potential foulants and con-taminants.Our inline probe cleaning solutions below have been shown to remove most common foulants and contaminants.A small,soft bristle brush,Q-Tips cotton swab,or soft cloth may be used to safely clean the probe housing and the quartz optical sensor channel.These components and more come with a Pyxis Lab Inline Probe Cleaning Solution Kit(P/N:SER-01)which can be purchased at our online Estore/Catalog https:///product/probe-cleaning-kit/Figure16.Inline Probe Cleaning Solution KitTo clean the ST-588probe,soak the lower half of the probe in100mL inline probe cleaning solution for 10minutes.Rinse the ST-588probe with distilled water and then check for the flashing blue light inside the ST-588probe quartz tube.If the surface is not entirely clean,continue to soak the ST-588probe for an e the small,soft bristle brush and Q-Tips cotton swabs as necessary to remove any remaining contaminants in the ST-588probe quartz tube.8.2StorageAvoid long term storage at temperature over100°F.In an outdoor installation,properly shield the ST-588 probe from direct sunlight and precipitation.9TroubleshootingIf the ST-588probe output signal is not stable and fluctuates significantly,make an additional ground con-nection––connect the clear(shield,earth ground)wire to a conductor that contacts the sample water electrically such as a metal pipe adjacent to the ST-588tee.Carry out routine calibration verification against a qualified Fluorescent Polymer and PTSA combined stan-dard.After properly cleaning the ST-588sensor,carry out the zero point calibration with distilled water and slope calibration using the qualified Fluorescent Polymer and PTSA combined standard.10Contact UsPyxis Lab,Inc1729Majestic Dr.Suite5Lafayette,CO80026USAPhone:+1(866)203-8397Email:*********************。

先进控制系统APC+2.0在聚乙烯装置操作优化中的应用

加工设备与应用CHINA SYNTHETIC RESIN AND PLASTICS合成树脂及塑料， 2024， 41（2）： 59先进控制系统APC+2.0在聚乙烯装置操作优化中的应用梅智鹏（福建炼油化工有限公司，福建泉州 362100）摘要：先进控制系统APC+2.0投用后使聚乙烯装置可靠性、产品质量控制、牌号切换控制都有较大提升，但在运行测试期间出现产品质量稳定性波动和切换牌号波动的问题。

通过对测试数据进行分析，优化了配方参数和操作方案。

运行效果表明：优化后的APC+2.0显著提升了最大加工负荷，降低了切换牌号时副牌号产品数量，减少了异戊烷消耗量，降低了操作强度，提升了产品质量稳定性，实现了产品价值的优化目标，为装置持续带来经济效益。

关键词：聚乙烯先进控制系统APC+2.0 运行难题操作优化运行效果中图分类号： TQ 325.1+2 文献标志码： B 文章编号： 1002-1396（2024）02-0059-07Application of advanced process control system APC+2.0 in optimization of PE plant operationMei Zhipeng（Fujian Petrochemical Company Limited ，Quanzhou 362100，China ）Abstract ： The reliability，product quality control and grade switch control of polyethylene unit have been greatly improved after the commissioning of advanced process control system APC+2.0. Two challenges of product quality and grade switch fluctuation appeared during the operation test. The formula parameters and operation program were optimized by analyzing the test data. The operation results show that the optimized APC+2.0 significantly improves the maximum load，reduces the off-specification products as a result of gradeswitch，saves the reactor 's consumption of iso-pentane，lowers the operational labor intensity，improves the product stability，furthers the product value，and brings economic benefits for the unit on a continuous basis.Keywords ： polyethylene； advanced control system APC+2.0； operational challenge； operation optimization； operation result收稿日期： 2023-10-17；修回日期： 2024-01-16。

华为AR100和AR120系列企业路由器数据手册说明书

DatasheetProduct OverviewThe AR100 and AR120 series are fixed interface routers that provide a comprehensive platform for a variety of network topologies, including IMS, NGN, WAN and PSTN. The AR100 and AR120 also employ embedded hardware encryption for security as well as a voice Digital Signal Processor (DSP) for voice services.The AR100 and AR120 series are mature, stable and quiet routers that offer high performance functionality for small networks, enabling small businesses to greatly increase productivity at a lower cost.AR100s and AR120s are easy to deploy, configure and customize, greatly reducing cost of deployment and maintenance, while offering maximum value to customers. These models allow network administrators to expand their networks easily and quickly, saving time and costs. The routers support firewalls, call processing, and application program functionalities.The AR100 and AR120 series includes the following models:●AR109, AR109W, AR109GW-L●AR129CVW, AR129CGVW-L, AR129CVThe specifications for these models are shown in the following table.Table1: AR100 ModelsAR109AR109WAR109GW-LTable2: AR120 ModelsAR129CVAR129CVWAR129CGVW-LProduct Features and BenefitsSmall Size and High Performance●More applications: Huawei series routers use the dual-core processor that isolates the control plane from the forwarding plane and processes more enterprise applications. Huawei series routers improve user experience for multimedia service when streams overlap.●Higher performance: The AR100s and AR120s can process various enterprise applications, and its service processing capability is four times that in the industry.●Greater potential: Huawei series routers provide the capability to migrate services to the 3G and LTE networks.Low Investment with High Returns●Easy to construct: The AR100s and AR120s supports plug-and-play, intelligent configuration, and deployment using the USB flash drive. It can function immediately after being installed. Users do not need to configure an IP address manually. The PPP and VPN indicators show the status of corresponding services. The AR100s and AR120s helps to quickly construct an enterprise IT network.●Simplified solution: Huawei provides an all-around solution that integrates the routing, switching, voice, security, and wireless services. Customers can customize solutions as required.●Easy to expand: Huawei series routers have four/eight FE/GE ports, can access more employee for small enterprises. The two uplink WAN ports implement load balancing and link protection, maximizing the return on investments.Small footprint on a Comprehensive Platform●Maturity and Stableness: The AR100s and AR120s uses the Huawei VRP operating system and VSP voice platform. In addition, the AR100s and AR120s uses modularized hardware design, which brings good user experience.●Low-noise office: Huawei series routers have no fan, which brings low noise and good user experience.●Secure environment: The lightning failure rate of AR100s and AR120s is only 3% of industry average. The AR100s and AR120s can be applied in the harsh environment.Sample DeploymentsWAN AccessExample deployment in branch networks for WAN access. In this example, the AR100s and AR120s function as the egress routers on enterprise branch networks and provide multiple access methods, including Ethernet, xDSL, 3G, LTE and WLAN. Enterprise Voice Services DeploymentIP PBX with WAN and PSTN AccessThis illustration shows AR120 series router deployed at an enterprise branch with access to a WAN and a PSTN. If a fault occurs on the WAN, the PSTN acts as a backup to the WAN and ensures that call services remain uninterrupted. AR120s are deployed at enterprise branch offices to provide intelligent, integrated dialing across the network. When deployed as voice service gateways, AR120s can function as IP PBX boxes and SIP access gateways.IP PBX.AR120s have a built-in PBX, which supports the enterprise main number, interactive voice response (IVR), and billing query functions. These features help enhance the corporate image of small businesses by allowing them to look more professional to their customers, while simultaneously improving the efficiency of their enterprise communications.SIP Server.AR120s have a built-in SIP server that ensures reliability of voice services. If the SIP server at the headquarters office becomes unreachable, the local built-in SIP server at the branch office ensures that communication remains uninterrupted between branch offices and the PSTN network.SIP Access GatewayThe AR120 series routers provide integrated voice, fax, and IP services. The AR120s can function as SIP access gateways for enterprise branch offices that transform traditional phone signals into Voice over IP (VoIP). Typically, AR120s are connected upstream from the IMS and NGN networks to enable anytime voice communication on any media, such as phones, handsets, and computers.VPN Deployment for Secure Enterprise CommunicationsVPNs Connecting Branches and Partners to HeadquartersThis illustration shows how to deploy AR100s and AR120s using VPNs to connect branches and partners to headquarters.AR100s and AR120s provide various VPN tunnel protocols to ensure secure communications between:∙Enterprise branches and other branch offices∙Enterprise branches and headquarters∙Partners and enterprise resourcesAR100s and AR120s support the following VPN tunnel protocols:∙GRE VPN∙IPSEC VPN∙DSVPNL2TP VPNAR100s and AR120s support fast tunnel set-up and authentication.Wireless Access and Management in Branch3G/LTE and Wi-Fi Wireless Access applicationThe AR100s, AR120s routers complied with 3G and LTE standards including HSPA+ and FDD LTE, meeting the wireless communication requirements between branches and the headquarters. In addition, the 3G or LTE data link can be used as a backup for wired link to protect the xDSL, FE/GE uplinks. The backup link improves network stability and reduces network construction costs.Some models of AR100s, AR120s routers are dual SIM devices, providing dual SIM standby. The customers can switch the SIM card manually according to 3G/LTE network standards. In addition, the device can switch to the backup SIM card when signal is weak to avoid link interruption.The AR100s, AR120s routers integrated WLAN wireless access capabilities, support 802.11a/b/g/n standard communication, Built-in AC function make the deployment and management more conveniently. Its wireless features can meet users’ demand for wireless access, and help enterprises to build a branch network flexibly.Wireless AC Management applicationThe AR120s routers integrated AC (Access Controller, a wireless controller) functionality, which can manage the wireless AP (Access Point) in wireless LAN. AR supported rich certification and flexible user access control, which can provide security access guarantee for Wi-Fi users. The rich wireless capabilities integrated in one device, this can realize centralized management of wired and wireless network, meet the customers’ requirements of building different scale enterprises networks.Technical Specifications Table 1: AR100s Technical SpecificationsTable 2: AR120s Technical SpecificationsThis content is applicable only to regions outside mainland China. Huawei reserves the right to interpret this content.*** Note: Service performance depending on specific feature configuration.****Note: When the altitude is between 1800 m and 5000 m, the highest operating temperature reduces by 1°C every time the altitude increases by 220 m.Ordering InformationThe AR100, AR120 series routers are configured by selecting and installing the appropriate configuration module. The configuration module ordering information and descriptions are shown in the following table1-3.Table 1: Chassis OptionsTable 2: Power Module OptionsTable 3: SD Card and USB Disk OptionsHUAWEI AR100 and AR120 Series Enterprise RoutersDatasheetCopyright © Huawei Technologies Co., Ltd. 2019. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without priorwritten consent of Huawei Technologies Co., Ltd.Trademarks and Permissionsand other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.All other trademarks and trade names mentioned in this document are the property of their respectiveholders.NoticeThe purchased products, services and features are stipulated by the contract made between Huaweiand the customer. All or part of the products, services and features described in this document may notbe within the purchase scope or the usage scope. Unless otherwise specified in the contract, allstatements, information, and recommendations in this document are provided "AS IS" withoutwarranties, guarantees or representations of any kind, either express or implied.The information in this document is subject to change without notice. Every effort has been made in thepreparation of this document to ensure accuracy of the contents, but all statements, information, andrecommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: 。

NetApp存储竞争分析

20PB
256GB 4,096 800K
Metrocluster的支持
Metrocluster-专用交换机！
建筑物A 光纤 MetroCluster™ 建筑物B
小于或等于 200 公里
暗光纤
DWDM
DWDM
无 SPOF — 所有组件和连接实现冗余专用 FC 交换机对
聚合 X 聚合 Y 镜像
12Gb SAS-3 存储接口/G系列早就支持
DS224C
高度插槽磁盘规格磁盘类型 2U 24 2.5” SFF SSD 10k rpm HDD
DS212C
2U 12 3.5” LFF 7.2k HDD SSD for hybrid
接口速度
ONTAP版本
12Gb/s
9.0
12Gb/s
9.0
4
4 8 8 (12Gb) 0 2 8.3
8
8 8 8 (12Gb) 4 2 8.3
SolidFire
SF2405
高度驱动器 2U (10)240GB 2.5" SSD
SF4805
2U (10) 480GB 2.5" SSD
SF9605
2U (10) 960GB 2.5" SSD
SF19210
2U (10) 1.92TB 2.5” SSD
4U 48 576* 40PB 512GB 16,384 1.4M
Controller** FE Ports Flash Modules Capacity (5:1) Cache Volumes IOPS
10U 128 576 40PB 2TB 65,280 4.8M
Capacity (5:1)

红酒酿造流程英文

IntroductionThe production of high-quality red wine is an intricate dance between artistry, science, and nature, involving a meticulous series of steps that transform humble grapes into complex, nuanced libations. This comprehensive guide delves deep into the red wine production process, elucidating each stage from vineyard management and grape harvesting to fermentation, aging, and bottling. By examining these stages in detail, we gain insight into the rigorous standards and precision required to craft exceptional wines that captivate both the palate and the soul.1. Vineyard Management: The Foundation of QualityThe journey of fine red wine begins long before the grapes are plucked from their vines. Vineyard management is the cornerstone of quality, dictating the health, character, and ultimate potential of the fruit.a) Site Selection and Soil Analysis: Optimal terroir, a French term encompassing soil, climate, and topography, is crucial for cultivating premium grapes. Winemakers carefully select sites with well-draining soils rich in minerals, adequate sun exposure, and suitable microclimates to nurture specific grape varieties. Regular soil analysis ensures proper nutrient balance and pH levels, enabling vines to thrive.b) Vine Training and Pruning: The trellising system, pruning techniques, and canopy management practices employed influence grapevine growth, yield, and fruit quality. Vertical Shoot Positioning (VSP), for instance, encourages optimal sunlight penetration and air circulation, reducing disease pressure and promoting even ripening. Pruning, typically conducted during winter dormancy, controls yields by limiting the number of buds per vine, concentrating flavors and aromas in the remaining grapes.c) Irrigation and Fertilization: While many premium wine regions advocate dry farming to enhance grape intensity, judicious irrigation may be necessary in drier climates or during drought years. Organic or biodynamic fertilizers may be applied to replenish soil nutrients, maintaining vine health withoutcompromising wine purity.2. Grape Harvest: Timing is EverythingThe decision to harvest is one of the most critical junctures in winemaking, as it determines the final wine's sugar content, acidity, and phenolic maturity.a) Berry Sampling and Testing: Winemakers and viticulturists regularly sample grapes, measuring sugar (Brix), acid (TA and pH), and tasting for flavor development. The ideal harvest window balances sugar levels for desired alcohol content, sufficient acidity for structure and freshness, and ripe tannins and anthocyanins for color, mouthfeel, and longevity.b) Harvest Method: Depending on the winery's philosophy and the vintage conditions, grapes may be harvested by hand or machine. Hand-picking allows for selective picking, ensuring only the best clusters reach the winery, while mechanical harvesting can be more efficient and cost-effective, particularly for large-scale operations.3. Vinification: Transforming Grapes into WineOnce harvested, grapes undergo a series of transformative processes to extract color, flavor, and tannins, ultimately yielding the finished wine.a) Crushing and Destemming: Grapes are gently crushed to release juice and partially broken skins, which contain valuable color pigments and tannins. Simultaneously, destemming removes stems to prevent bitter tannins from entering the must. Some winemakers may opt for whole-cluster fermentation, incorporating intact stems for added complexity and structure.b) Maceration and Fermentation: Crushed grapes (must) are transferred to fermentation vessels, where they undergo alcoholic fermentation. Yeast converts sugars into alcohol and carbon dioxide, generating heat and releasing aromatic compounds. During this period, the must is periodically punched down or pumped over to ensure skin contact, extracting color, tannins, and flavor compounds. Temperature control is crucial, as excessive heat can lead to loss of delicate aromas and flavors.c) Pressing and Malolactic Fermentation: Once primary fermentationconcludes, the wine is pressed to separate the liquid (free-run wine) from the solids (skins, seeds, and stems). The press wine, containing higher tannins, may be blended with free-run wine to achieve the desired style. Many red wines then undergo malolactic fermentation, a secondary bacterial fermentation that converts harsh malic acid into softer lactic acid, contributing to wine's texture and stability.4. Aging and Maturation: Enhancing Complexity and HarmonyThe aging process is instrumental in refining a young wine's character, integrating its components, and developing tertiary aromas and flavors.a) Barrel Aging: Many premium red wines are aged in oak barrels, which contribute vanilla, spice, and toast notes, as well as subtle oxygenation that softens tannins and enhances complexity. The choice of oak origin (French, American, Hungarian, etc.), toast level, and barrel size (barrique, puncheon, or larger formats) significantly impacts the wine's profile. Periodic racking, or transferring wine from one barrel to another, helps clarify the wine and prevent spoilage.b) Stainless Steel or Concrete Aging: Some winemakers prefer to age their wines in inert containers like stainless steel tanks or concrete eggs to preserve the purity of fruit flavors and minimize oak influence. These vessels can also offer temperature control and micro-oxygenation benefits.c) Blending and Assemblage: Prior to bottling, winemakers may blend different grape varieties, vineyard blocks, or batches fermented and aged separately to achieve the desired style, balance, and consistency. This artful process involves numerous tastings and adjustments to create a harmonious final product.5. Fining, Filtration, and Bottling: Ensuring Stability and ClarityThe final stages of red wine production focus on stabilizing the wine and preparing it for bottling.a) Fining and Clarification: Fining agents such as egg whites, bentonite clay, or activated charcoal may be used to remove excess tannins, proteins, andother suspended particles, resulting in a clearer, more stable wine. Alternatively, cold stabilization can precipitate tartrate crystals, preventing unsightly sediment in the bottle.b) Filtration: Depending on the desired level of clarity and the wine's natural stability, it may be filtered using various methods ranging from coarse filtration to sterile filtration. However, some producers advocate against filtration, believing it can strip wine of its character and complexity.c) Bottling: Once the wine is deemed ready, it is bottled under carefully controlled conditions to minimize oxygen exposure and prevent contamination. Corks or alternative closures are chosen based on their oxygen transmission rates, compatibility with the wine, and environmental impact. Finally, the bottles are labeled, sealed, and stored for further maturation or immediate release.ConclusionThe production of high-quality red wine is a multifaceted, exacting endeavor that combines centuries-old traditions with cutting-edge technology. From the meticulous cultivation of grapes in the vineyard to the artful blending and careful bottling, every step is guided by a relentless pursuit of excellence. This comprehensive overview underscores the dedication, skill, and passion required to craft exceptional wines that not only satisfy but inspire, reflecting the unique terroir, vintage nuances, and the winemaker's vision. Ultimately, it is this unwavering commitment to quality that distinguishes fine red wines, making them a testament to the profound synergy between nature, craftsmanship, and time.。

APRISO FlexNet Product Overview 产品介绍

FlexNet Product Overview产品介绍“Success is simple. Do what’s right, the right way, at the right time.” – Arnold H. Glasow您参与管理着一个成功的企业，必将认识到，在今天的激烈竞争时代，“执行”是企业赢得竞争和取得收益的关键因素。

然而，企业执行力常常因为许多因素被削弱——系统崩溃、过量库存、材料短缺、产品缺陷、设备停机和各种浪费——此前对于ERP系统的投资并不能彻底解决这些经常发生的问题。

FlexNet执行系统—给您提供完整解决方案Apriso® 公司的FlexNet™ 覆盖从基础作业到企业使命的完整执行过程，从这个意义上，它不仅是世界上第一个也是迄今为止唯一的执行系统应用套件。

帮助您管理遍及全球的制造、发货、仓库、收货、质量管理和维护活动。

FlexNet将最新的Web Services技术传递到那些最重要的、急迫需要协同却被现有信息系统分隔开的执行成员——操作工人、检查人员、供应商——手中，帮助他们最大限度地获得速度、质量和效率，并使之达到完全的可追溯、可说明。

主要收益已经实施和应用FlexNet的领先企业，实现了显而易见而且令人瞩目的收益。

这些收益包括：-显著降低库存，并且降低物料处理作业费用-通过作业高效化，降低销售成本-缩短现金回收（Order-to-Cash）周期-显著降低满足法规符合性成本-提高客户满意度，保持并改善质量和按时交货等关键绩效做正确的事对于ERP系统来说，做正确的事就是执行计划。

但是计划并非总是对的，尤其是基于预测的计划往往在执行的最后一刻被证明是错误的。

今天，不会再有时间让我们在发生变化的最后时刻去重新编排计划。

通常采取的措施是，增加昂贵存货的拥有量，或者预留能力，也可以通过高成本的加班，应急定单或者紧急发货来实现交货加速。

在当前急需降低成本的巨大竞争压力之下，这些措施的花费显得实在太过昂贵。

电池循环微热电泳解决方案说明书

While electrochemical calorimetry is a powerful tool, the complexity and nuance of the experiments make it difficult to approach for many researchers. Hyphenated or hybrid instrument techniques are commonly plagued with lengthy data processing after the experiment has ended, when correlating the signals from different devices. They also require multiple software interfaces, where the user is forced to synchronize the start times and experiment parameters. The Battery Cycler Microcalorimeter Solution is designed to eliminate these issues and simplify battery calorimetry by integrating the calorimeter and potentiostat at the hardware and software levels.BATTERY CYCLER MICROCALORIMETER SOLUTIONThe Battery Cycler Microcalorimeter Solution integrates the BioLogic VSP-300 Potentiostat with the TA Instruments TAM IV Isothermal Microcalorimeter (Figure 1). The integrated TAM Assistant software controls both devices, including experiment creation and real time assimilation of the heat flow and electrochemical data. The pre-wired lifters are calorimeter inserts that house the batteries and make electrical contact with the potentiostat. These lifters are designed to conduct heat generated from the battery into the calorimeter, while minimizing noise from ambient thermal fluctuations and wire heating. The connection to the battery is made with a conductive spring clip, so no soldering or additional insulation is required. There are three different lifters to accommodate common lithium-ion battery dimensions. The coin cell lifter will house a coin (button) cell up to 23 mm in diameter. This lifter is compatible with any 20 mL calorimeter on the TAM IV , including the Microcalorimeter and Multicalorimeter (3-pack) configuration. The Macrocalorimeter lifter fits standard 18650 size cylindrical cells, most commonly used for electric vehicles. The Micro-XL lifter will house pouch cells with maximum dimensions of 50 mm width, 94 mm length, and 12 mm thick. The tabs are held by an adjustable clamp (with conductive contacts) to accommodate a variety of tab spacings.Depending on the testing needs, the TAM IV calorimeters can beconfigured in several different ways to maximize throughput. If the TAM IV is fitted with 4 Multicalorimeters, and two VSP-300 Potentiostats (housing 6 channels each), a user can test 12-coin cells simultaneously in discrete experiments. ABSTRACTThe Battery Cycler Microcalorimeter Solution integrates TA Instrument’s TAM IV isothermal microcalorimeter with BioLogic’s VSP-300 Potentiostat. This system streamlines the most complex and labor-intensive aspects of battery calorimetry, improving the performance and practical utility of this technology. Control of the potentiostat and calorimeters, import and correlation of both data sets, and automated analysis features are all performed in the integrated TAM Assistant software. The pre-wired battery lifters are calorimeter inserts that house the batteries and facilitate electrical contact to the potentiostat. They are customized to accommodate three common lithium-ion battery designs: 18650 cylindrical cells, pouch cells, and coin cells. This solution is a highly valued instrument for research and development labs and provides greater insights than other current techniques on the market.INTRODUCTIONTraditional research methodologies in battery chemistry have treated materials characterization and thermal analysis as separate from the electrochemical testing. The materials characterization was done to quantify new battery components and how those components changed after cell failure. Thermal analysis was used to design better thermal management systems for end use applications. Most of the information about how the battery performs, what type of chemistry is occurring inside the cell, and how it changes over time, was gathered from the electrochemical data. The information produced from this traditional research workflow left many blind spots in the chemistry [1]. Batteries are highly dynamic systems with a mixture of electrochemical reactions, chemical reactions, and structural changes occurring each cycle. Electrochemical analysis will only give information on processes that affect the electrochemical reactions, leaving all other activities (chemical, phase, structural) uncharacterized. There are many states of change between a new and a failed battery cell and understanding the degradation process requires more insight than current techniques can provide [1,2].New approaches are focused on combining a secondary analytical technique with electrochemistry to quantify the battery processes during operation. One of the leading strategies towards this effort is the coupling of high resolution isothermal microcalorimetry with electrochemistry [3-6]. Understanding the thermal activity of lithium-ion batteries as a function of the electrochemical stimuli will yield far greater insights than electrochemistry alone. In addition to general thermal management data, calorimetry can also measure parasitic reactions (non-reversible reactions leading to degradation), structural changes, lithium plating, self-discharge rates, and reactions associated with SEI layer growth/decay [3-8]. This data can be used in research to better understand and improve battery formulation chemistry. Battery calorimetry can also be used in quality control to more effectively screen out poorly made cells, owing to its innate compatibility with commercial cell designs.Keywords: microcalorimetry, electrochemistry, lithium-ion batteries, parasitic reactions, hyphenated techniques Battery Cycler Microcalorimeter SolutionFigure 1. The Battery Cycler Microcalorimetry Solution integrates TA Instrument’s TAM IV Isothermal Microcalorimeter with BioLogic’s VSP-300 Potentiostat. The Pre-wired lifters house the batteries and make electrical contact with the potentiostat. Both instruments are controlled through an integrated TAM Assistant software.INTEGRATED SOFTWAREFrom a workflow perspective, the most important aspect of the battery cycler microcalorimeter is the software integration between the TAM IV and the VSP-300. TAM Assistant can control the TAM IV and the VSP-300 Potentiostat simultaneously to facilitate battery calorimetry experiments from a single software interface. The new experiment wizards for battery experiments are shown in Figure 2. The experiment wizard will guide the user through selecting a method, customizing parameters, loading the sample, and ensuring proper baseline stability.Figure 2. New experiment wizard in TAM Assistant. User can choose from a variety of pre-set experiments and program custom run sequences for maximum flexibility.An overview of available methods is given belowManual: Custom experiments, programmed by selecting actions, wait times, and event markers in the run sequence menu. Heat management (CCCV): Measures heat flow during cycling, primarily used for thermal management applications. This method will program different charging profiles (variable charge / discharge rates) using constant current constant voltage (CCCV) parameters. Entropy changes: This method consists of a slow cycle (C/20) followed by a very slow cycle (C/100) for maximum resolution into the structural and phase changes that occur during lithiation/delithiation. First cycle reaction (SEI): Method designed to study the SEI formation reactions. This method applies a small charging current in the low voltage range where SEI formation occurs (typically below 3.0 V), then applies a higher charging current until the standard upper voltage limit is reached (typically 4.2 V). Full cycle parasitics: Method to measure the parasitic power over the full voltage range. The term Parasitics is a blanket term for any non-reversible side reaction that contributes to battery degradation. Narrow cycle parasitics: Method to measure the parasitic power in a narrow voltage. This is a faster technique if only one (or more) narrow voltage windows are of interest. Self-discharge: Experiment for measuring the self-discharge rate. This combines the conventional technique (monitoring open circuit voltage over time, then discharging to measure the remaining capacity) and the thermal method of integrating the total heat produced over the open circuit time. During the experiment, the thermal and electrochemical signals are plotted in the same window (Figure 3). In order for the data to be meaningful, it is correlated with an unmatched high degree of precision. Both sets of data are timestamped and automatically correlated by the software during import. This is a significant improvement over manual data processing, which takes much longer and often has transcription errors.Figure 3. Real-time data integration of the potentiostat and calorimetersignals. Voltage and Heat Flow labels were added for clarity.VSP-300TA InstrumentsTAM IVANALYSIS TOOLSAfter the experiment has concluded, there are several analysis options in the results file. The integrated TAM Assistant software will automatically calculate key values and present them in a table or as a plot. There are several options for the x-axis and y-axis, the ability to overlay multiple cycles, and the option to separate charge from discharge (see Figure 4). These tools were designed to maximize flexibility, speed, and ease of use, so the user could more efficiently find trends or features within the data. The summary table presents the averaged or accumulated signals, including coulombic efficiency and average parasitic power. More information regarding the calculations, theory and calibration can be found in the TA Instruments application note entitled “Determination of Parasitic Power in Lithium-Ion Batteries using the Battery Cycler Microcalorimeter Solution.”Figure 4. Automated Plotting of raw signals and calculated values. CONCLUSIONSCalorimetry of full battery cells is a valuable tool for thermal management, electrolyte additive research, active material formulation, and quality control. The barrier to this technology was the complexity of the experiments and labor-intensive data processing. The Battery Cycler Microcalorimeter Solution integrates the TAM IV with the VSP-300 at the hardware and software levels to improve accessibility, reliability, and the general utility of battery calorimetry.REFERENCES1. Liu D, Shadike Z, Lin R, Qian K, Li H, Li K, Wang S, Yu Q,Liu M, Ganapathy S, Qin X, Yang QH, Wagemaker M, Kang F, Yang XQ, Li B. Review of Recent Development of In Situ/ Operando Characterization Techniques for Lithium Battery Research. Adv Mater. 2019, 28, 1806620.2. Matthew G. Boebinger, John A. Lewis, Stephanie E. Sandoval,and Matthew T. McDowell. Understanding Transformations in Battery Materials Using in Situ and Operando Experiments: Progress and Outlook. ACS Energy Letters, 2020, 5 (1), 335-345.3. L.J. Krouse, L.D. Jensen, J.R. Dahn. Measurement of ParasiticReactions in Li Ion Cells by Electrochemical Calorimetry. J.Electrochem. Soc. 2012, 159 (7), A937-A943.4. L.E. Downie, S.R. Hyatt, J.R. Dahn. The Impact ofElectrolyte Composition on Parasitic Reactions in Lithium Ion Cells Charged to 4.7 V Determined Using IsothermalMicrocalorimetry. J. Electrochem. Soc. 2016, 163 (2), A35-A42.5. L.J. Krouse, L.D. Jensen, V.L. Chevrier. Measurement of Li-IonBattery Electrolyte Stability by Electrochemical Calorimetry. J.Electrochem. Soc. 2017, 164 (4), A889-A896.6. Alexander Kunz, Clara Berg, Franzika Friedrich, Hubert A.Gasteiger, Andreas Jossen. Time-Resolved Electrochemical Heat Flow Calorimetry for the Analysis of Highly Dynamic Processes in Lithium-Ion Batteries. J. Electrochem. Soc.2022, 169, 080513.7. J.C. Burns, Adil Kassam, N.N. Sinha, L.E. Downie, LucieSolnickova, B.M. Way, J.R. Dahn. Predicting and Extending the Lifetime of Li-Ion Batteries. J. Electrochem. Soc. 2013, 160, A1451.8. Downie, Laura, Krause, L., Burns, J, Jensen, L, Chevrier,V, Dahn, J. In Situ Detection of Lithium Plating on Graphite Electrodes by Electrochemical Calorimetry. Journal of The Electrochemical Society. 2013, 160, A588-A594. ACKNOWLEDGEMENTThis paper was written by Jeremy May, PhD at TA Instruments. For more information or to request a product quote, please visit /to locate your local sales officeinformation.。

Hitachi Vantara 企业存储系统与 Oracle Solaris Cluster 4 相

Copyright © 2023, Oracle and/or its affiliates.
Volume Manager Software
Oracle Solaris SVM ZFS/zpools for ZFS Filesystems3
Multi-Path Driver – Oracle Solaris
Host Adapters
SAN Switches5
Oracle SAN driver bundled in OS for Oracle Solaris 11 releases
9. Disaster Recovery is the same as Oracle Solaris Cluster Geographic Edition.
For more information about Oracle Solaris Cluster, visit or call +1.800.ORACLE1 to speak to an Oracle representative.
4. “Native” HBAs supported by Oracle Solaris: Non-Sun/Oracle HBAs require that Sun/Oracle drivers be utilized. See partner handbook for more info (a support account is required), if needed: https:///handbook_partner/index.html
SG-XPCIE1FC-EM8-Z, SG-XPCIE1FC-QF8-Z, SG-XPCIE1FC-EM8-N, SG-XPCIE1FC-QF8-N SG-XPCIE2FC-EM8-Z, SG-XPCIE2FC-QF8-Z, SG-XPCIE2FC-EM8-N, SG-XPCIE2FC-QF8-N