AS1301-7R中文资料

合集下载

日本不锈钢

日本不锈钢分类牌号主要组成特点和用途分类：默认分类字号：大大中中小小[一]奥氏体型SUS201 17Cr-4.5Ni-6Mn-N 是节Ni钢中，301钢的替代钢。

经冷加工后具有磁性。

用于铁路车辆SUS202 18Cr-5Ni-8Mn-N 是节Ni钢中，301钢的替代钢。

用于庖厨器具SUS301 17Cr-7Ni 经冷加工后可得到高强度。

用于铁路车辆、带式输送机、螺栓和螺母、弹簧等SUS301L 17Cr-7Ni-低C-N 是低碳SUS301钢，具有优良的抗晶间腐蚀性能和焊接性能。

用于铁路车辆等SUS301J1 17Cr-7.5Ni-0.1C 拉伸加工性能和弯曲加工性能优于304钢，加工硬化居304钢和301钢中间。

用于弹筑、厨房用具、器件、建筑、车辆等SUS302 18Cr-8Ni-0.1C 冷加工后可获高强度，但延伸劣于301钢。

用于建筑物外部装饰材料SUS302B 18Cr-8Ni-2.5Si-0.1C 抗氧化性能优于302钢，在900摄氏度以下具有与310S钢等同的抗氧化性能和强度。

用于汽车尾气净化装置、用作工业炉等高温设备材料SUS303 18Cr-8Ni-高S 提高切削性能和抗高温粘结性能。

最适于用自动车床。

螺栓和螺母SUS303Se 18Cr-8Ni-Se 提高切削性能和抗高温粘结性能。

最适于用自动车床。

用于铆钉和螺丝SUS304 18Cr-8Ni 是得到最广泛用的不锈钢、耐热钢。

用于食品生产设备、普通化工设备、核能等SUS304L 18Cr-9Ni-低C 是极低碳304钢。

具有优良的抗晶间腐蚀性能。

用于焊接后不能进行热处理的部件等SUS304N1 18Cr-8Ni-N 在304钢中添加N，在抑制延伸性能下降的同时提高强度，有减小材料厚度的效果。

用于结构强度用部件SUS304N2 18Cr-8Ni-N-Nb 在304钢中添加N和Nb，使其具有同上一样的性能。

用途与304N1钢相同SUS304LN 18Cr-8Ni-N-低C 在304钢中添加N，使其具有同上一样的性能。

AM1301-7R中文资料

•Rugged electrical and mechanical design •Outputs individually controlled with excellent dynamic properties•Operating ambient temperature range –40...71°CWide input voltage from 8...372 V DC1, 2 or 3 isolated outputs up to 48 V DC 4 kV AC I/O electric strength test voltageSelection chartLGACM, DM and LM types available as CMZ, DMZ and LMZ class II equipment2/12.2000Input voltage 6 wide-input ranges (1:5)refer to selection chartOutputEfficiency U i nom, I o nom up to 83%i nom o nom±0.6% U o nom Output voltage switching noise IEC/EN 61204, total typ. 50 mV ppi min i max o nom o nom Load regulation U i nom, 0...I o nom, each output regulated typ. 0.15% U o nom Minimum load not required0 A Current limitation main output rectangular U/I characteristic typ. 110% I o nomo nom Operation in parallel by current limitation, only main outputsi nom o nomU i nom, I o nom, A/B/C/D/FM with ext. diode in input line up to 7 msProtectionInput reverse polarity built-in fusei min Input overvoltage lockout typ. 110% U i maxOutput no-load, overload and short circuit proofo nom Overtemperature switch-off with auto restart T C typ. 100°CControlOutput voltage adjustment single output types0...110% U o nom Status indication LEDs: OK, inhibit, overloadSafetyApprovals EN 60950, UL 1950, CSA C22.2 No. 950Class of equipment AM, BM, CM, DM, FM, LM class I Protection degree units without options IP 40class I, I/O 4 kV ACO/case 1 kV ACElectrostatic discharge IEC/EN 61000-4-2, level 4 (8/15 kV)criterion B Electromagnetic field IEC/EN 61000-4-3, level x (20 V/m)criterion A/B Electr. fast transients/bursts IEC/EN 61000-4-4, input, level 3/4 (2/4 kV)criterion A/B Surge IEC/EN 61000-4-5, input, level 3/4 (2/4 kV)criterion A Electromagnetic emissions CISPR 22/EN 55022, conducted class BEnvironmentalOperating ambient temperature U i nom, I o nom, convection cooled–25...71°C Operating case temperature C i nom, o nom–25...95°C Storage temperature non operational–40...100°C Damp heat IEC/EN 60068-2-3, 93%, 40°C56 daysn Shock IEC/EN 60068-2-27, 6 ms100 g nn Random vibration IEC/EN 60068-2-64, 20...500 Hz 4.9 g n rms MTBF MIL-HDBK-217E, G B, 40°C, single output types320'000 h OptionsExtended temperature range–40...71°C, ambient, operating-9 Electronic inrush current limitation Eo nomInput and/or output undervoltage monitoring, excludes option V D0...D9 Test sockets for check of output voltage A Enhanced electric strength test 2 kV AC H Fuse not user accessible FPin allocationMechanical data ArrayTolerances ±0.3 mm (0.012") unless otherwise indicated.AccessoriesFront panels 19” (Schroff/Intermas)Mating H11 connectors with screw, solder, fast-on or press-fit terminalsConnector retention facilities and code key system for connector codingFlexible PCB for connecting the converter via an H11 connector, if mounted on a PCB Chassis or wall mounting plates for frontal accessUniversal mounting brackets for chassis or DIN-rail mounting。

可控硅参数说明及中英文对照表完整版

断态重复峰值漏电流
为晶闸管在阻断状态下承受断态重复峰值电压VDRM和反向重复峰值电压VRRM时流过元件的正反向峰值漏电流该参数在器件允许工作的最高结温Tjm下测出。
mA
IRRM
Maximum reverse leakage current
反向重复峰值漏电流
mA
IDSM
断态不重复平均电流
门极断路时，在额定结温下对应于断态不重复峰值电压下的平均漏电流。
mA
ID
Off-state leakage current
断态漏电流
-
mA
VGT
Triggering gate voltage
门极触发电压
—可以选择Vgt 25度时max值的β倍。β为门极触发电压—结温特性系数，查数据手册可得，取特性曲线中最低工作温度时的系数。若对器件工作环境温度无特殊需要，通常选择时β取1~1.2倍即可。
A/μs
VDRM
Repetitive peak off-state voltage
断态重复峰值电压
断态重复峰值电压是在门极断路而结温为额定值时，允许重复加在器件上的正向峰值电压.国标规定重复频率为50H，每次持续时间不超高10ms。规定断态重复峰值电压DRM为断态不重复峰值电压（即断态最大瞬时电压）UDSM的90%.断态不重复峰值电压应低于正向转折电压bo，所留裕量大小由生产厂家自行规定。UU
℃
Tstg
Storage Temperature Range
贮存温度
-
℃
TL
Max.Lead Temperature for Soldering Purposes
引脚承受焊锡极限温度
-
℃
Rth(j-mb)

TDA1301中文资料

note 1 note 1
Note
1. fsys = 4.2336 MHz; VRL = 0 V; VRH = 2.5 V (externally applied).
MIN.
3.0 3.0 − − − − − − −40
TYP.
− − 5 5 − − − 50 −
MAX.
5.5 5.5 − − 10 15.8 7.9 − +85
TEST2
15 test input 2
OTD
16 off-track detector output
CLKO
17 clock output
XTALO
18 oscillator output
XTALI
19 oscillator input
VDDD1 VSSD RA
20 digital power supply 1 21 digital ground 22 radial actuator output
– 28-pin SO package – Great flexibility towards different CD mechanisms – Full and transparent application information • High robustness/shock insensitivity – Sophisticated track-loss (TL) detection mechanism – Fast focus restart procedure – Extended radial error signal – Adjustable radial shock detector – Defect drop-out detector • Fully automatic jump procedure for radial servo • Automatic focus start-up procedure and built-in FOK (Focus OK) • Fast radial jump or access procedure • Self-operational servo-control without continuous communication via the microcontroller • Direct communication to photodiode optics; no external preprocessing.

MICROMEGA 高精度过程控制器说明书

CN77000 R300和R500控制器,图片中含RHS-43孔锯, 易于钻圆孔。

有关订购信息, 请参见最后一页。

CN77333-A2 NEMA 12款方形开孔。

CN77533 NEMA 4方形开孔。

图片为实际尺寸。

1⁄16 DIN MICROMEGA ®自动调谐PID温度/过程控制器U 高精度：±0.5°C (0.9°F), 读数的0.03% U品质优秀, 还有5年保修支持 U 通用输入—过程电压/电流、热电偶、RTD U 双4位数字LED 显示屏和指示器, 用于显示输出和报警状态 U 可选RS232或RS485, OMEGA ® 协议U 继电器、SSR 、DC 脉冲、0 ~ 10 V, 以及 0 ~ 20 mA 输出类型 U 斜坡到设定值功能 U 通用电源, 90 ~ 250 Vac 或Vdc U 双输出和双报警功能U 隔离模拟输出或远程设定值可选将方形控制器放置于圆孔中！高精度、高品质MICROMEGA ®控制器在过程控制中提供无与伦比的灵活性。

每台设备均允许用户从10个热电偶类型（J 、K 、T 、E 、R 、S 、B 、C 、N 和JDIN ）、Pt RTD （100、500或1000 Ω, 385或392曲线）或者模拟电压或电流输入中选择输入类型。

电压/电流输入可完全扩展到各工程单位，可选择小数点，是压力、流量或其他过程输入的理想之选。

MICROMEGA ®控制器具有大型双LED 显示屏，采用前面板配置，可选温度/过程输入，并接受90 ～ 250 Vac 或Vdc 通用电源。

提供单和双输入配置，CN77000系列适用于继电器、SSR 、DC 脉冲或模拟电压或电流输出。

单报警是标准配置。

可选项包括第二报警、 RS232、RS485、模拟输出以及远程设定值可选。

“300”系列控制器有许多特色，更大，紧凑型1⁄4 DIN 控制器，1⁄16 DIN 尺寸。

AN13300A资料

7 8
Note) *:
Supply current Power dissipation
ICC PD
mA W
Expect for the operating ambient temperature and storage temperature , all ratings are for Ta = 25°C.
DATA SHEET
Part No. Package Code No.
AN13300A
*SOP022 - P - 0375C
SEMICONDUCTOR COMPANY MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD.
Publication date: January 2005
2003 SEP
SDF00039AEB
1
AN13300A Contents
Features …………………………………………………………………………………………………………… 3 Applications ………………………………………………………………………………………………………… 3 Package ……………………………………………………………………………………………………………. 3 Block Diagram ………………………………………………………………………………………………………. 4 Pin Descriptions …………………………………………………………………………………………………… 4 Absolute Maximum Ratings ………………………………………………………………………………………. 5 Operating Supply Voltage Range ………………………………………………………………………………. 5

商品说明书：ATLAS SOUND AT 系列商业抑制器

©2011 A t l a s S o u n d L .P . A l l r i g h t s r e s e r v e d . A t l a s S o u n d a n d S t r a t e g y S e r i e s a r e t r a d e m a r k s o f A t l a s S o u n d L .P . A l l o t h e r t r a d e m a r k s a r e t h e p r o p e r t y o f t h e i r r e s p e c t i v e o w n e r s . A T S 001063 R e v D 10/13Commercial AttenuatorsAT Series, E408 SeriesFeatures• M odels Feature a Range of Attenuation Steps (1.5dB or 3dB Steps) as Well as Continuous to Meet Application and Budget Requirements • W all Plates are Stainless Steel with Stamped and Filled or Screen Printed Dial Scale, and a Skirted Black Knob (White and Ivory Plastic Plates with Matching Skirted Knobs Also Available in Decora Style-D Series Only)• P opular Rack Mount Attenuator Versions are Available on the AT and E408 Series for Mounting on to Blank Panels in Equipment Cabinets• All AT Models Mount into Most 1-Gang E.O. Boxes. (23⁄4" Deep)• AT and E408 Series are UL ListedGenenal DescriptionAT Series Industry Standard Auto Transformer. High-quality auto transformer series provides the advantages of excellent frequencyresponse, low insertion loss and reliable performance for volume control application in 25V/70.7V systems. Attenuation is accomplished in ten make before break steps plus positive Off position. (No stop between maximum and Off position to prevent switch damage). Contacts are silver plated for noise-free operation. Features a removable terminal block. Includes stainless steel plate, with stamped and filled or screen printed dial scale and a skirted black knob. (White and ivory plastic plates with matching skirted knobs also available in Decora style-see AT model description chart).E408 Auto Transformer with Precision Level Control. Specially designed for attenuation in masking and sound reinforcement systems where fine tuning of level control is required. Employs a ten-position, non-shorting rotary switch without stop. Attenuation rate is 1.5dB per step. (All other specifications are the same as the AT Series including the UL listing).PA Series Priority Paging Option. Priority paging feature by-passes the effect of the attenuator to provide program level selection of individual emergency and paging signals at the amplifier. Option isavailable on all AT attenuators. The SPDT relay is operated with 24VDC at 10mA. Includes protective relay cover to ensure lasting trouble-free performance. Terminations to the relay and attenuator are made via a removable terminal block. (All other specifications except for dimensions are the same as selected AT models).RM Series Rack Mount Option. For attenuation convenience of rack-mounted equipment in cabinets and consoles, the AT, E408Series attenuators are available without mounting plate for rack panel installation. Attractive matte black polycarbonate dial scale overlay with adhesive backing replaces the mounting plate. Includes skirted black knob. Overlay size is 29 square (51mm). (To order, simply add RM after the selected attenuator model number. Example: AT10-RM or AT10-PARM.) (Dial scale overlays to retrofit existing installations are available, see Model HX23.)Replacement Knobs©2011 A t l a s S o u n d L .P . A l l r i g h t s r e s e r v e d . A t l a s S o u n d a n d S t r a t e g y S e r i e s a r e t r a d e m a r k s o f A t l a s S o u n d L .P . A l l o t h e r t r a d e m a r k s a r e t h e p r o p e r t y o f t h e i r r e s p e c t i v e o w n e r s . A T S 001063 R e v D 10/13Specfications AT10-(PA)Power Rating * 10 WattsUL ListingAttenuation Per Step 3dB Total Attenuation33dB**Insertion Loss .4dB Plate Size 1 gang Resistance NoneAT35-(PA)Power Rating *35 WattsUL ListingAttenuation Per Step 3dB Total Attenuation27dBInsertion Loss .6dB Plate Size 1 gang Resistance NoneAT100-(PA)Power Rating *100 WattsUL ListingAttenuation Per Step 3dB Total Attenuation27dBInsertion Loss .6dB Plate Size 1 gang Resistance NoneE408-100Power Rating *100 WattsUL ListingAttenuation Per Step 1.5dB Total Attenuation15dBInsertion Loss .6dB Plate Size 1 gang Resistance None* Continuous** These units have two steps of 6dB before off position.Note: Attenuation curve is steeper for a 25-volt lineArchitect and Engineer SpecificationsAT Series Attenuator(s) shall be Atlas Sound AT Series Model____________ auto transformer or approved equal. The power rating shall be __________ and attenuation range shall be _________dB. Attenuation per step for AT-____ shall be 8 steps of 3dB and 6dB each for the last two positions. Attenuator shall be a step type control with a positive off position. There shall be no stop between the maximum and off positions (AT Series only). Switch shall have silver plated contacts to eliminate noise and contact loss. All terminations must be made via a removable terminal block. Unit(s) shall be supplied with one of the following single gang face plates to be noted by model number suffix: Standard stain l ess steel faceplate (with dial scale to indicate attenuator position), Decora style plastic face plate-Ivory color, Decora style plastic face plate-White color. All models are designed to mount in a standard E.O. box.E408 UL Listed attenuator shall be Atlas Sound Model E408-100 auto transformer or approved equal. The power rating shall be 100W. The at t enu a tion per step shall be 1.5dB. Unit shall be a step type control with a positive off position. There shall be no stop between the maximum and off positions. Switch shall have silver plated contacts to elimi n ate noise and contact loss. The attenuator shall be mounted to a standard gang stainless steel wall plate which mounts to a standard E.O. box.RM Option Attenuator shall be Atlas Sound Model ____________ [(AT, E408 (-RM)] or ap p roved equal. Face plate shall be replaced by an adhesive matte black poly c ar b on a te dial scale escutcheon for attachment to a rack mount panel. Escutcheon size shall be 2" SQ.PA Option Specified AT Series attenuators include a priority relay. Relay shall be an SPDT, 24 VDC type securely mounted to the attenuator assembly wired at the factory. Relay shall include a protective cover.AT10 (dc) (-PA) (-RM)AT35 (dc) (-PA) (-RM)Faceplate Options:d = D - Decora Style FaceplateIvory and White inserts, trim ring and knobs icluded.If there is not the above 1 letter suffix, the attenuator is shipped with the standard stainless steel faceplate or is the RM version without a faceplate.©2011 A t l a s S o u n d L .P . A l l r i g h t s r e s e r v e d . A t l a s S o u n d a n d S t r a t e g y S e r i e s a r e t r a d e m a r k s o f A t l a s S o u n d L .P . A l l o t h e r t r a d e m a r k s a r e t h e p r o p e r t y o f t h e i r r e s p e c t i v e o w n e r s . A T S 001063 R e v D 10/13AT SeriesDimensional Specifications Plate Mounted AttenuatorsMODEL A B C D EAT10 41⁄2" 21⁄8" 23⁄4" 23⁄4" 13⁄4"AT10-PA 41⁄2" 21⁄8" 23⁄4" 23⁄4" 13⁄4"AT3541⁄2"21⁄8" 23⁄4" 23⁄4" 13⁄4"AT35-PA 41⁄2" 21⁄8" 23⁄4" 23⁄4" 13⁄4"AT10041⁄2"21⁄2" 23⁄4" 23⁄4" 13⁄4"AT100-PA 41⁄2" 21⁄2" 23⁄4" 23⁄4" 13⁄4"E408-100 41⁄2"25⁄8"23⁄4"23⁄4"13⁄4"©2011 A t l a s S o u n d L .P . A l l r i g h t s r e s e r v e d . A t l a s S o u n d a n d S t r a t e g y S e r i e s a r e t r a d e m a r k s o f A t l a s S o u n d L .P . A l l o t h e r t r a d e m a r k s a r e t h e p r o p e r t y o f t h e i r r e s p e c t i v e o w n e r s . A T S 001063 R e v D 10/13WIRING - AT SeriesEach terminal will hold up to 2-16AWG stranded wire.For larger wires or home run situations, a small length of wire and a wire nut are recommended.Attach wire according to label on terminal black as shown below (Non-PA Models will not have the "VDC+" and "VDC-" terminals).* Install the unit with the terminal block on top. This will ensure that theoff position is on the bottom.©2011 A t l a s S o u n d L .P . A l l r i g h t s r e s e r v e d . A t l a s S o u n d a n d S t r a t e g y S e r i e s a r e t r a d e m a r k s o f A t l a s S o u n d L .P . A l l o t h e r t r a d e m a r k s a r e t h e p r o p e r t y o f t h e i r r e s p e c t i v e o w n e r s . A T S 001063 R e v D 10/13Wiring - (-Pa) Priority AttenuatorsRelay SpecificationsCOIL VOLTAGE: 24VDC COIL CURRENT: 10MACONTACTS: S PDT-2AMP RatingRelay Has a Protective CoverPower Switching Req. For - Pa Attenuators。

西门子选型手册

12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
N：50，H：65
N：65，H：80，L：100
L：100
N：50，H：65
N：65，H：80，L：100
L：100
N：42，H：50
N：55，H：65，L：80
L：80
N：24，H：29
N：32，H：37，L：401)/502)
1
7
框架和塑壳断路器
功能
基本功能→ (9-22)
过载保护 (L 脱扣 ) 短路短延时保护 (S 脱扣 ) 短路瞬时保护 (I 脱扣 ) N 线保护 (N 脱扣 ) 接地故障脱扣
506)
506)
506)
506)
506)
506)
寿命机械工作周期（不含维修时）机械工作周期（含维修时）电气工作周期（不含维修时） 1000V供电时工作周期电气工作周期（含维修时）
工作循环工作循环工作循环工作循环工作循环
10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 5000 5000 5000 20000 20000 20000 15000 15000 15000 15000 15000 15000 15000 10000 10000 10000 10000 10000 10000 7500 7500 7500 7500 7500 7500 4000 2000 2000 2000
3
标准变频器选型表……………………… 33
4
面板开关
DELTA vega “灵动”系列总览………………… 39 DELTA vista “远景”系列总览………………… 40

思塔高sta r max技术参数

思塔高sta r max技术参数下载温馨提示：该文档是我店铺精心编制而成，希望大家下载以后，能够帮助大家解决实际的问题。

本文下载后可定制随意修改，请根据实际需要进行相应的调整和使用，谢谢!并且，本店铺为大家提供各种各样类型的实用资料，如教育随笔、日记赏析、句子摘抄、古诗大全、经典美文、话题作文、工作总结、词语解析、文案摘录、其他资料等等，如想了解不同资料格式和写法，敬请关注!Downloaded tips: This document is carefully compiled by the editor. I hope that after you download them, they can help you solve practical problems. The documents can be customized and modified after downloading, please adjust and use it according to actual needs, thank you!In addition, our shop provides you with various types of practical materials, such as educational essays, diary appreciation, sentence excerpts, ancient poems, classic articles, topic composition, work summary, word parsing, copy excerpts, other materials and so on, want to know different data formats and writing methods, please pay attention!思塔高Star Max是一款技术参数超群的产品，它不仅仅是一台设备，更是一种科技与艺术的完美结合。

西门子灭弧室 -参数

VS12031 PR型真空灭弧室技术参数 Specification: Vacuum Interrupter VS12031PR 1. 电气参数Electrical Data额定电压,50/60 Hz Rated voltage, 50/60 Hz 12 kV 额定电流Rated normal current 1600 A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 20 kA 最大直流分量Max. DC-component 40 % 额定短路关合电流Rated short-circuit making current 50 kA 额定峰值耐受电流Rated peak withstand current 50 kA 额定短时耐受电流, 4s Rated short-time withstand current, 4s 20 kA 开断容性电流符合IEC62271-100 Capacitive switching acc. to IEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage 42 kV 额定雷电冲击耐受电压Rated lightning impulse withstand voltage 75 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 15 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem (terminal) 120 o C 4. 电气寿命Electrical Life额定电流情况下With rated normal current 20,000 次短路电流情况下With short-circuit current 50 次5. 机械参数Mechanical Data触头开距Contact stroke 6 ± 0.5 mm 分闸过冲Max. overtravel 1 mm 平均分闸速度(0-2mm 行程) Average opening speed (0-2mm stroke) 0.8 - 1.2 m/s 平均合闸速度(2mm-触头闭合) Average closing speed (2 mm- contact making) 0.6 - 1.0 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力* Min. closing force* 1,200 N 最大关合力* Max. closing force* 1,500 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 100 N 额定开距下触头反力** Force required to hold contacts open at full stroke** 140±10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 2 mm 动触头质量Mass of moving contact 0.9 kg 灭弧室重量Weight of interrupter 2.6 kg 机械寿命Mechanical life 20,000 次* 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applicationsVS12031PR 真空灭弧室外形图VS12031PR Vacuum Interrupter Drawing (12kV/1600A-20kA)VS12031型真空灭弧室技术参数 Specification: Vacuum Interrupter VS120311. 电气参数Electrical Data额定电压,50/60 Hz Rated voltage, 50/60 Hz 12 kV 额定电流Rated normal current 1600 A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 20 kA 最大直流分量Max. DC-component 40 % 额定短路关合电流Rated short-circuit making current 50 kA 额定峰值耐受电流Rated peak withstand current 50 kA 额定短时耐受电流, 4s Rated short-time withstand current, 4s 20 kA 开断容性电流符合IEC62271-100 Capacitive switching acc. to IEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage 42 kV 额定雷电冲击耐受电压Rated lightning impulse withstand voltage 75 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 15 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem (terminal) 120 o C 4. 电气寿命Electrical Life额定电流情况下With rated normal current 20,000 次短路电流情况下With short-circuit current 50 次5. 机械参数Mechanical Data触头开距Contact stroke 6 ± 0.5 mm 分闸过冲Max. overtravel 1 mm 平均分闸速度(0-2mm 行程) Average opening speed (0-2 mm stroke) 0.8 - 1.2 m/s 平均合闸速度(2mm-触头闭合) Average closing speed (2 mm- contact making) 0.6 - 1.0 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力* Min. closing force* 1,200 N 最大关合力* Max. closing force* 1,500 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 100 N 额定开距下触头反力** Force required to hold contacts open at full stroke** 140±10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 2 mm 动触头质量Mass of moving contact 0.9 kg 灭弧室重量Weight of interrupter 2.6 kg 机械寿命Mechanical life 20,000 次* 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applicationsVS12031 真空灭弧室外形图VS12031 Vacuum Interrupter Drawing (12kV/1600A-20kA)VS12035R 型真空灭弧室技术参数Specification: Vacuum Interrupter VS12035R 1. 电气参数Electrical Data额定电压, 50/60 Hz Rated voltage, 50/60 Hz 12 kV 额定电流Rated normal current 1600 A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 25 kA 最大直流分量Max. DC-component 50 % 额定短路关合电流Rated short-circuit making current 63 kA 额定峰值耐受电流Rated peak withstand current 63 kA 额定短时耐受电流, 4s/3s Rated short-time withstand current, 4s/3s 25 kA 开断容性电流符合IEC62271-100Capacitive switching acc. to IEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage 42 kV 额定雷电冲击耐受电压Rated lightning impulse withstand voltage 75 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 9 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem(terminal)120 o C4. 电气寿命Electrical Life额定电流情况下With rated normal current 30,000 次短路电流情况下With short-circuit current 50 次5. 机械参数Mechanical Data触头开距Contact stroke 85.15.0-+mm分闸过冲Max. overtravel 2 mm 平均分闸速度(0-2mm 行程) Average opening speed (0-2mm stroke) 1.0-1.3 m/s 平均合闸速度(2mm-触头闭合) Average closing speed (2 mm- contact making) 0.7-1.1 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力* Min. closing force* 2000 N 最大关合力* Max. closing force* 2500 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 80 N 额定开距下触头反力** Force required to hold contacts open at full stroke** 120±10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 3 mm 动触头质量Mass of moving contact 0.9 kg 灭弧室重量Weight of interrupter 3.7 kg 机械寿命Mechanical life 30,000 次* 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applicationsVS12035R真空灭弧室外形图VS12035R Vacuum Interrupter Drawing (12kV/1600A-25kA)VS12035 型真空灭弧室技术参数Specification: Vacuum Interrupter VS120351. 电气参数Electrical Data额定电压, 50/60 Hz Rated voltage, 50/60 Hz 12 kV 额定电流Rated normal current 1600 A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 25 kA 最大直流分量Max. DC-component 50 % 额定短路关合电流Rated short-circuit making current 63 kA 额定峰值耐受电流Rated peak withstand current 63 kA 额定短时耐受电流, 4s/3s Rated short-time withstand current, 4s/3s 25 kA 开断容性电流符合IEC62271-100Capacitive switching acc. to IEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage 42 kV 额定雷电冲击耐受电压Rated lightning impulse withstand voltage 75 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 9 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem(terminal)120 o C4. 电气寿命Electrical Life额定电流情况下With rated normal current 30,000 次短路电流情况下With short-circuit current 50 次5. 机械参数Mechanical Data触头开距Contact stroke 85.15.0-+mm分闸过冲Max. overtravel 2 mm 平均分闸速度(0-2mm 行程) Average opening speed (0-2 mm stroke) 1.0-1.3 m/s 平均合闸速度(2mm-触头闭合) Average closing speed (2 mm- contact making) 0.7-1.1 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力* Min. closing force* 2000 N 最大关合力* Max. closing force* 2500 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 80 N 额定开距下触头反力** Force required to hold contacts open at full stroke** 120±10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 3 mm 动触头质量Mass of moving contact 0.9 kg 灭弧室重量Weight of interrupter 3.7 kg 机械寿命Mechanical life 30,000 次* 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applicationsVS12035真空灭弧室外形图VS12035 Vacuum Interrupter Drawing (12kV/1600A-25kA)VS12036 型真空灭弧室技术参数Specification: Vacuum Interrupter VS12036 1. 电气参数Electrical Data额定电压, 50/60 Hz Rated voltage, 50/60 Hz 12 kV 额定电流Rated normal current 1600 A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 25 kA 最大直流分量Max. DC-component 50 % 额定短路关合电流Rated short-circuit making current 63 kA 额定峰值耐受电流Rated peak withstand current 63 kA 额定短时耐受电流, 4s/3s Rated short-time withstand current, 4s/3s 25 kA 开断容性电流符合IEC62271-100Capacitive switching acc. to IEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage 42 kV 额定雷电冲击耐受电压Rated lightning impulse withstand voltage 75 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 9 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem(terminal)120 o C4. 电气寿命Electrical Life额定电流情况下With rated normal current 30,000 次短路电流情况下With short-circuit current 50 次5. 机械参数Mechanical Data触头开距Contact stroke 85.15.0-+mm分闸过冲Max. overtravel 2 mm 平均分闸速度(0-2mm 行程) Average opening speed (0-2 mm stroke) 1.0-1.3 m/s 平均合闸速度(2mm-触头闭合) Average closing speed (2 mm- contact making) 0.7-1.1 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力* Min. closing force* 2000 N 最大关合力* Max. closing force* 2500 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 80 N 额定开距下触头反力** Force required to hold contacts open at full stroke** 120±10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 3 mm 动触头质量Mass of moving contact 0.9 kg 灭弧室重量Weight of interrupter 3.7 kg 机械寿命Mechanical life 30,000 次* 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applicationsVS12036真空灭弧室外形图VS12036 Vacuum Interrupter Drawing (12kV/1600A-25kA)VS12040R 型真空灭弧室技术参数Specification: Vacuum Interrupter VS12040R1. 电气参数Electrical Data额定电压,50/60 Hz Rated voltage, 50/60 Hz 12 kV 额定电流Rated normal current 1600 A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 31.5 kA 最大直流分量Max. DC-component 50 % 额定短路关合电流Rated short-circuit making current 80 kA 额定峰值耐受电流Rated peak withstand current 80 kA 额定短时耐受电流, 4s Rated short-time withstand current, 4s 31.5 kA 开断容性电流符合IEC62271-100 Capacitive switching acc. to IEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage42 kV额定雷电冲击耐受电压Rated lightning impulse withstand voltage 75 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 9 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem (terminal) 120 o C 4. 电气寿命Electrical Life额定电流情况下With rated normal current 30,000 次短路电流情况下With short-circuit current 50 次5. 机械参数Mechanical Data触头开距Contact stroke 85.15.0-+mm分闸过冲Max. overtravel 2 mm 平均分闸速度(0-2mm 行程) Average opening speed (0-2 mm stroke) 1.0-1.3 m/s 平均合闸速度(2mm-触头闭合) Average closing speed (2 mm- contact making) 0.7-1.1 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力* Min. closing force* 3100 N 最大关合力* Max. closing force* 3700 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 80 N 额定开距下触头反力** Force required to hold contacts open at full stroke** 120±10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 3 mm 动触头质量Mass of moving contact 0.9 kg 灭弧室重量Weight of interrupter 3.7 kg 机械寿命Mechanical life 30,000 次* 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applicationsVS12040R真空灭弧室外形图VS12040R Vacuum Interrupter Drawing (12kV/1600A-31.5kA)VS12040 型真空灭弧室技术参数Specification: Vacuum Interrupter VS120401. 电气参数Electrical Data额定电压,50/60 Hz Rated voltage, 50/60 Hz 12 kV 额定电流Rated normal current 1600 A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 31.5 kA 最大直流分量Max. DC-component 50 % 额定短路关合电流Rated short-circuit making current 80 kA 额定峰值耐受电流Rated peak withstand current 80 kA 额定短时耐受电流, 4s Rated short-time withstand current, 4s 31.5 kA 开断容性电流符合IEC62271-100 Capacitive switching acc. to IEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage42 kV额定雷电冲击耐受电压Rated lightning impulse withstand voltage 75 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 9 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem (terminal) 120 o C 4. 电气寿命Electrical Life额定电流情况下With rated normal current 30,000 次短路电流情况下With short-circuit current 50 次5. 机械参数Mechanical Data触头开距Contact stroke 85.15.0-+mm分闸过冲Max. overtravel 2 mm 平均分闸速度(0-2mm 行程) Average opening speed (0-2 mm stroke) 1.0-1.3 m/s 平均合闸速度(2mm-触头闭合) Average closing speed (2 mm- contact making) 0.7-1.1 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力* Min. closing force* 3100 N 最大关合力* Max. closing force* 3700 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 80 N 额定开距下触头反力** Force required to hold contacts open at full stroke** 120±10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 3 mm 动触头质量Mass of moving contact 0.9 kg 灭弧室重量Weight of interrupter 3.7 kg 机械寿命Mechanical life 30,000 次* 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applicationsVS12040真空灭弧室外形图VS12040 Vacuum Interrupter Drawing (12kV/1600A-31.5kA)VS12041 型真空灭弧室技术参数Specification: Vacuum Interrupter VS120411. 电气参数Electrical Data额定电压,50/60 Hz Rated voltage, 50/60 Hz 12 kV 额定电流Rated normal current 1600 A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 31.5 kA 最大直流分量Max. DC-component 50 % 额定短路关合电流Rated short-circuit making current 80 kA 额定峰值耐受电流Rated peak withstand current 80 kA 额定短时耐受电流, 4s Rated short-time withstand current, 4s 31.5 kA 开断容性电流符合IEC62271-100 Capacitive switching acc. to IEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage42 kV额定雷电冲击耐受电压Rated lightning impulse withstand voltage 75 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 9 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem (terminal) 120 o C 4. 电气寿命Electrical Life额定电流情况下With rated normal current 30,000 次短路电流情况下With short-circuit current 50 次5. 机械参数Mechanical Data触头开距Contact stroke 85.15.0-+mm分闸过冲Max. overtravel 2 mm 平均分闸速度(0-2mm 行程) Average opening speed (0-2mm stroke) 1.0-1.3 m/s 平均合闸速度(2mm-触头闭合) Average closing speed (2 mm- contact making) 0.7-1.1 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力* Min. closing force* 3100 N 最大关合力* Max. closing force* 3700 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 80 N 额定开距下触头反力** Force required to hold contacts open at full stroke** 120±10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 3 mm 动触头质量Mass of moving contact 0.9 kg 灭弧室重量Weight of interrupter 3.7 kg 机械寿命Mechanical life 30,000 次* 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applicationsVS12041真空灭弧室外形图VS12041 Vacuum Interrupter Drawing (12kV/1600A-31.5kA)Siemens Medium Voltage Switching Technologies (Wuxi) Ltd.西门子中压开关技术（无锡）有限公司VS17005R型真空灭弧室技术参数Specification: Vacuum Interrupter VS 17005R1. 电气参数Electrical Data额定电压,50/60 Hz Rated voltage, 50/60 Hz 12 kV 额定电流Rated normal current 2500 A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 31.5 kA 最大直流分量Max. DC-component 50 % 额定短路关合电流Rated short-circuit making current 80 kA 额定峰值耐受电流Rated peak withstand current 80 kA 额定短时耐受电流, 4s Rated short-time withstand current, 4s 31.5 kA 开断容性电流符合IEC62271-100 Capacitive switching acc. to IEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage 42 kV 额定雷电冲击耐受电压Rated lightning impulse withstand voltage 75 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 9 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem (terminal) 120 o C 4. 电气寿命Electrical Life额定电流情况下With rated normal current 30,000 次短路电流情况下With short-circuit current 50 次5. 机械参数Mechanical Data触头开距Contact stroke 85.15.0-+mm分闸过冲Max. overtravel 2 mm 平均分闸速度(0-2mm 行程) Average opening speed (0-2 mm stroke) 1.0-1.3 m/s 平均合闸速度(2mm-触头闭合) Average closing speed (2 mm- contact making) 0.7-1.1 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力* Min. closing force* 3100 N 最大关合力* Max. closing force* 3700 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 80 N 额定开距下触头反力** Force required to hold contacts open at full stroke** 120±10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 3 mm 动触头质量Mass of moving contact 0.9 kg 灭弧室重量Weight of interrupter 3.7 kg 机械寿命Mechanical life 30,000 次* 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applicationsVS17005R 真空灭弧室外形图VS17005R Vacuum Interrupter Drawing (12kV/2500A-31.5kA)VS17005型真空灭弧室技术参数Specification: Vacuum Interrupter VS 170051. 电气参数Electrical Data额定电压,50/60 Hz Rated voltage, 50/60 Hz 12 kV 额定电流Rated normal current 2500 A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 31.5 kA 最大直流分量Max. DC-component 50 % 额定短路关合电流Rated short-circuit making current 80 kA 额定峰值耐受电流Rated peak withstand current 80 kA 额定短时耐受电流, 4s Rated short-time withstand current, 4s 31.5 kA 开断容性电流符合IEC62271-100 Capacitive switching acc. to IEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage 42 kV 额定雷电冲击耐受电压Rated lightning impulse withstand voltage 75 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 9 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem (terminal) 120 o C 4. 电气寿命Electrical Life额定电流情况下With rated normal current 30,000 次短路电流情况下With short-circuit current 50 次5. 机械参数Mechanical Data触头开距Contact stroke 85.15.0-+mm分闸过冲Max. overtravel 2 mm 平均分闸速度(0-2mm 行程) Average opening speed (0-2 mm stroke) 1.0-1.3 m/s 平均合闸速度(2mm-触头闭合) Average closing speed (2 mm- contact making) 0.7-1.1 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力* Min. closing force* 3100 N 最大关合力* Max. closing force* 3700 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 80 N 额定开距下触头反力** Force required to hold contacts open at full stroke** 120±10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 3 mm 动触头质量Mass of moving contact 0.9 kg 灭弧室重量Weight of interrupter 3.7 kg 机械寿命Mechanical life 30,000 次* 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applicationsVS17005 真空灭弧室外形图VS17005 Vacuum Interrupter Drawing (12kV/2500A-31.5kA)VS17006XV型真空灭弧室技术参数Specification: Vacuum Interrupter VS 17006XV1. 电气参数Electrical Data额定电压,50/60 Hz Rated voltage, 50/60 Hz 12 kV 额定电流Rated normal current 2500 A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 31.5 kA 最大直流分量Max. DC-component 50 % 额定短路关合电流Rated short-circuit making current 80 kA 额定峰值耐受电流Rated peak withstand current 80 kA 额定短时耐受电流, 4s Rated short-time withstand current, 4s 31.5 kA 开断容性电流符合IEC62271-100 Capacitive switching acc. to IEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage 42 kV 额定雷电冲击耐受电压Rated lightning impulse withstand voltage 75 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 9 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem (terminal) 120 o C 4. 电气寿命Electrical Life额定电流情况下With rated normal current 30,000 次短路电流情况下With short-circuit current 50 次5. 机械参数Mechanical Data触头开距Contact stroke 85.15.0-+mm分闸过冲Max. overtravel 2 mm 平均分闸速度(0-2mm 行程) Average opening speed (0-2 mm stroke) 1.0-1.3 m/s 平均合闸速度(2mm-触头闭合) Average closing speed (2 mm- contact making) 0.7-1.1 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力* Min. closing force* 3100 N 最大关合力* Max. closing force* 3700 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 80 N 额定开距下触头反力** Force required to hold contacts open at full stroke** 120±10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 3 mm 动触头质量Mass of moving contact 0.9 kg 灭弧室重量Weight of interrupter 3.7 kg 机械寿命Mechanical life 30,000 次* 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applicationsVS17006XV 真空灭弧室外形图VS17006XV Vacuum Interrupter Drawing (12kV/2500A-31.5kA)VS15102R 型真空灭弧室技术参数Specification: Vacuum Interrupter VS15102R1. 电气参数Electrical Data额定电压,50/60 Hz Rated voltage, 50/60 Hz 12 kV 额定电流Rated normal current 3150(4000*) A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 40 kA 最大直流分量Max. DC-component 50 % 额定短路关合电流Rated short-circuit making current 100 kA 额定峰值耐受电流Rated peak withstand current 100 kA 额定短时耐受电流, 4s Rated short-time withstand current, 4s 40 kA 开断容性电流符合IEC62271-100Capacitive switching acc. toIEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage 42 kV 额定雷电冲击耐受电压Rated lightning impulse withstand voltage 75 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 9 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem (terminal) 120 o C 4. 电气寿命Electrical Life额定电流情况下With rated normal current 30,000 次短路电流情况下With short-circuit current 30 次5. 机械参数Mechanical Data触头开距Contact stroke 8± 1 mm 分闸过冲Max. overtravel 2 mm 平均分闸速度(0-5mm 行程) Average opening speed (0-5 mm stroke) 1.0-1.8 m/s 平均合闸速度(5mm-触头闭合) Average closing speed (5 mm- contact making) 0.8-1.0 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力** Min. closing force** 3700 N 最大关合力** Max. closing force** 4200 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 120 N 额定开距下触头反力*** Force required to hold contacts open at full stroke*** 170± 10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 3 mm 动触头质量Mass of moving contact 1.9 kg 灭弧室重量Weight of interrupter 7 kg 机械寿命Mechanical life 30,000 次* 开关运行时需加强制风冷，此参数已经试验验证Forced cooling added is requested, this data was approved in test** 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere** *** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applicationsVS15102R真空灭弧室外形图VS15102R Vacuum Interrupter Drawing (12kV/3150A,4000A-40kA)VS15102型真空灭弧室技术参数Specification: Vacuum Interrupter VS151021. 电气参数Electrical Data额定电压,50/60 Hz Rated voltage, 50/60 Hz 12 kV 额定电流Rated normal current 3150(4000*) A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 40 kA 最大直流分量Max. DC-component 50 % 额定短路关合电流Rated short-circuit making current 100 kA 额定峰值耐受电流Rated peak withstand current 100 kA 额定短时耐受电流, 4s Rated short-time withstand current, 4s 40 kA 开断容性电流符合IEC62271-100Capacitive switching acc. toIEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage 42 kV 额定雷电冲击耐受电压Rated lightning impulse withstand voltage 75 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 9 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem (terminal) 120 o C 4. 电气寿命Electrical Life额定电流情况下With rated normal current 30,000 次短路电流情况下With short-circuit current 30 次5. 机械参数Mechanical Data触头开距Contact stroke 8 ± 1 mm 分闸过冲Max. overtravel 2 mm 平均分闸速度(0-5mm 行程) Average opening speed (0-5 mm stroke) 1.0-1.8 m/s 平均合闸速度(5mm-触头闭合) Average closing speed (5 mm- contact making) 0.8-1.0 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力** Min. closing force** 3700 N 最大关合力** Max. closing force** 4200 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 120 N 额定开距下触头反力*** Force required to hold contacts open at full stroke*** 170± 10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 3 mm 动触头质量Mass of moving contact 1.9 kg 灭弧室重量Weight of interrupter 7 kg 机械寿命Mechanical life 30,000 次* 开关运行时需加强制风冷，此参数已经试验验证Forced cooling added is requested, this data was approved in test** 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere** *** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applicationsVS15102真空灭弧室外形图VS15102 Vacuum Interrupter Drawing (12kV/3150A,4000A-40kA)VS15103V 型真空灭弧室技术参数Specification: Vacuum Interrupter VS15103V1. 电气参数Electrical Data额定电压,50/60 Hz Rated voltage, 50/60 Hz 12 kV 额定电流Rated normal current 3150(4000*) A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 40 kA 最大直流分量Max. DC-component 50 % 额定短路关合电流Rated short-circuit making current 100 kA 额定峰值耐受电流Rated peak withstand current 100 kA 额定短时耐受电流, 4s Rated short-time withstand current, 4s 40 kA 开断容性电流符合IEC62271-100Capacitive switching acc. toIEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage 42 kV 额定雷电冲击耐受电压Rated lightning impulse withstand voltage 75 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 9 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem (terminal) 120 o C 4. 电气寿命Electrical Life额定电流情况下With rated normal current 30,000 次短路电流情况下With short-circuit current 30 次5. 机械参数Mechanical Data触头开距Contact stroke 8 ± 1 mm 分闸过冲Max. overtravel 2 mm 平均分闸速度(0-5mm 行程) Average opening speed (0-5 mm stroke) 1.0-1.8 m/s 平均合闸速度(5mm-触头闭合) Average closing speed (5 mm- contact making) 0.8-1.0 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力** Min. closing force** 3700 N 最大关合力** Max. closing force** 4200 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 120 N 额定开距下触头反力*** Force required to hold contacts open at full stroke*** 170± 10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 3 mm 动触头质量Mass of moving contact 1.9 kg 灭弧室重量Weight of interrupter 7 kg 机械寿命Mechanical life 30,000 次* 开关运行时需加强制风冷，此参数已经试验验证Forced cooling added is requested, this data was approved in test** 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere** *** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applicationsVS15103V真空灭弧室外形图VS15103V Vacuum Interrupter Drawing (12kV/3150A,4000A-40kA)VS30025 型真空灭弧室技术参数Specification: Vacuum Interrupter VS300251. 电气参数Electrical Data额定电压,50/60 Hz Rated voltage, 50/60 Hz 40.5 kV 额定电流Rated normal current 1600 A 额定短路开断电流,对称的Rated short-circuit breaking current, symm. 25 kA 最大直流分量Max. DC-component 40 % 额定短路关合电流Rated short-circuit making current 63 kA 额定峰值耐受电流Rated peak withstand current 63 kA 额定短时耐受电流, 4s Rated short-time withstand current, 4s 25 kA 开断容性电流符合IEC62271-100Capacitive switching acc. toIEC62271-100 C2 级2. 额定绝缘水平Rated Insulation Level额定工频耐受电压Rated power-frequency withstand voltage 95 kV 额定雷电冲击耐受电压Rated lightning impulse withstand voltage 185 kV 3. 热参数Thermal Data最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ≤ 15 μΩ 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem (terminal) 120 o C 4. 电气寿命Electrical Life额定电流情况下With rated normal current 30,000 次短路电流情况下With short-circuit current 30 次5. 机械参数Mechanical Data触头开距Contact stroke 20 ± 2 mm 分闸过冲Max. overtravel 3 mm 平均分闸速度(0-6mm 行程) Average opening speed (0-6 mm stroke) 1.3-1.8 m/s 平均合闸速度(6mm-触头闭合) Average closing speed (6 mm- contact making) 1.1-1.7 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 最小关合力* Min. closing force* 2000 N 最大关合力* Max. closing force* 2500 N 波纹管和大气压产生的关合力Closing force due to bellows and atmosphere 230 N 额定开距下触头反力** Force required to hold contacts open at full stroke*** 370± 10% N 触头磨损最大值Contact erosion limit including mechanical shortening(包括电流路径机械性缩短) of current-conducting path 3 mm 动触头质量Mass of moving contact 3.2 kg 灭弧室重量Weight of interrupter 11 kg 机械寿命Mechanical life 30,000 次* 包括波纹管和大气压力产生的关合力incl. force due to bellows and atmosphere**** 动触头在下面movable contact below本表所列参数已在西门子3AH断路器上得到成功的验证其它型号断路器适配请垂询All data approved in Siemens 3AH circuit breaker Data has to be rechecked for other applications。

7MBR10SA120中文资料

I2t
(Non-Repetitive)
Operating junction temperature
Storage temperature
Isolation between terminal and copper base *2
voltage between thermistor and others *3
Item
Symbol
Condition
Inverter
Zero gate voltage collector current Gate-Emitter leakage current Gate-Emitter threshold voltage Collector-Emitter saturation voltage
Item Collector-Emitter voltage Gate-Emitter voltage
Collector current
Symbol VCES VGES IC
ICP
Inverter
Collector power dissipation Collector-Emitter voltage Gate-Emitter voltage Collector current
2.3
V
2.35
3.2
0.35 µs
1.0 mA
0.2 µA
2.1
V
2.2
2.6
0.35
1.2 µs
0.25
0.6
0.45
1.0
0.08
0.3
1.0 mA
1.1
V
1.2
1.5
1.0 mA
5000
Ω
465

中兴S330硬件手册及应用

资料名称
产品版本
V1.2
您单位安装该设备的时间
ZXMP S330（V1.2）基于 SDH 的多业务节点设备硬件手册
资料版本
20060325-R1.0
为了能够及时与您联系，请填写以下有关您的信息
姓名
单位名称
邮编
单位地址
电话
E-mail
好
较好
一般
较差
差
总体满意
工作指导
您对本资料的评价
查阅方便内容正确内容完整
声明
本资料著作权属中兴通讯股份有限公司所有。未经著作权人书面许可，任何单位或个人不得以任何方式摘录、复制或翻译。
侵权必究。
和
是中兴通讯股份有限公司的注册商标。中兴通讯产品的名称和标志是
中兴通讯的专有标志或注册商标。在本手册中提及的其他产品或公司的名称可能是其各
自所有者的商标或商名。在未经中兴通讯或第三方商标或商名所有者事先书面同意的情
资料名称产品版本v12您单位安装该设备的时间zxmps330v12基于sdh的多业务节点设备硬件手册资料版本20060325r10为了能够及时与您联系请填写以下有关您的信息姓名邮编电话总体满意工作指导您对本资料的评价查阅方便内容正确内容完整结构合理图表说明通俗易懂内容结构内容详细您对本资料的改进建议内容深度表达简洁增加图形增加实例增加faq其他您对中兴通讯用户资料的其他建议单位名称单位地址较好一般详细说明较差差email好前言手册说明内容介绍本手册适用于unitranszxmps330v12基于sdh的多业务节点设备以下简称zxmps330
3．《Unitrans ZXMP S330（V1.2）基于 SDH 的多业务节点设备安装手册》介绍设备的工程安装步骤，包括安装准备、硬件安装、线缆布放、安装检查、设备上下电的具体操作。

船王应该如何购买合适的纯铝焊丝？

应该购买怎么样的纯铝焊丝？铝合金焊接使用的焊丝，应该要求焊接时飞溅小，噪声低，成形好；焊丝表面光洁度高，光亮顺滑并且具有电弧稳定性，完/美的焊接外观。

郑州市船王焊材完全满足您的需要！郑州市船王焊材有限公司是研制生产铝焊丝、铝合金焊丝的综合型企业。

“船王”牌焊丝适用于航天、航空、船舶、石油化工、军工、食品包装及建筑冶金等领域。

先销售铝焊丝质量稳定，性价/比高，已有不少客户愿意代替出口焊丝使用。

主要供应纯铝1070/1100、铝硅4043/4047、铝镁5356/5183/5A06、铝锰3003/3103/3A21各种型号铝焊丝，详细供应信息如下：公司引进高新科技生产设备，由焊接工程师参照ANSI/AWS A5.10等国际标准，按照 ISO9001质量管理体系的要求，严格控制产品质量。

产品已通过SGS、CE欧盟认证，同时有我省焊接学会常年提供技术指导及焊接工艺评定，确保产品品质。

船王焊丝的优势：1.自主研制熔炼开发及生产全过程，可以根据客户的需求调配出具体的化学成份。

2.采用独特的机械刮削。

剥皮工艺，减少空气污染，减少焊接时气孔的产生。

3.飞溅小，噪声低，成形好，高/效能，提高焊接质量。

4.焊丝表面光洁度高，光亮顺滑，具有更强的送丝性能。

5.具有电弧稳定性，完/美的焊接外观保证了生产速度及生产效率。

船王焊材尺寸供应表：SAL1070是一种含百分之99铝的填充金属，可用于建筑、装饰和设备、冶金、管道、纺纱器具等行业。

一般用于1100、3003或与3003相近的母材及1060、1070、1080、1035。

该焊丝阳极化处理后呈现轻微的金黄色，焊缝抗拉强度为110MP。

性能特点：是含铝大于百/分之99.5的纯铝焊丝，具有良好的可焊性和耐蚀性，以及优良的塑性和韧性，但强度较低。

用途：适用于氩弧焊及氧-乙炔气焊纯铝及对接头要求不高的铝合金作为填充材料，广泛应用于化学工业铝制设备上。

郑州市船王焊材有限公司整理厂址：郑州市荥阳豫龙镇毛寨工业区。

7MBR35SB120中文资料

Turn-on time
Turn-off time
Reverse current Forward on voltage
Reverse current Resistance
B value
ICES IGES VGE(th) VCE(sat)
Cies ton tr tr(i) toff tf VF
trr ICES IGES VCE(sat)
50Hz/60Hz sine wave Tj=150°C, 10ms half sine wave
AC : 1 minute
*1 Recommendable value : 2.5 to 3.5 N·m (M5) *2 All terminals should be connected together when isolation test will be done. *3 Terminal 8 and 9 should be connected together. Terminal 1 to 7 and 10 to 24
Symbol
Condition
Inverter IGBT
Thermal resistance ( 1 device )
Rth(j-c)
Inverter FWD Brake IGBT
Converter Diode
Contact thermal resistance *
Rth(c-f)
With thermal compound
Tj= 125 oC (typ.) 80
VGE= 20V
15V 12V
60
10V 40
Collector current : Ic [ A ]
20
8V

1301芯片

1301芯片
1301芯片是一款由国内集成电路设计公司展讯科技（Spreadtrum Communications）推出的芯片。

该芯片是一种低功耗、高性能的移动通信芯片，广泛应用于智能手机、平板电脑、物联网等设备中。

1301芯片采用了先进的28nm工艺制程，拥有强大的计算能力和低功耗特性。

它搭载了四核ARM Cortex-A7处理器，主频可以达到1.2GHz，性能强劲。

同时，该芯片还配备了Mali-400 MP2图形处理器，支持高清视频播放和流畅的游戏体验。

1301芯片还支持多种通信技术，包括2G、3G和4G网络，可以满足不同用户的需求。

它内置了多个通信模块，如WiFi、蓝牙和GPS等，可以实现各种无线连接。

此外，该芯片还支持双卡双待功能，用户可以同时使用两张SIM卡，方便灵活的通信。

1301芯片还拥有丰富的外设接口，方便用户扩展功能。

它支持多种传感器，如加速度计、陀螺仪、光感和距离传感器等，提供更多实用的功能。

此外，它还支持USB接口、HDMI输出和外部存储扩展等，能够满足用户对多样化接口需求。

1301芯片还拥有先进的图像处理和音频处理技术。

它支持多种图像和视频编解码格式，如JPEG、H.264和VP8等，能够实现高清图像和视频的播放和拍摄。

同时，它还支持多种音频格式，如MP3、AAC和WAV等，提供良好的音频体验。

总的来说，1301芯片是一款性能强劲、功耗低的移动通信芯片。

它具备强大的计算能力和丰富的通信功能，支持多种外设接口和先进的图像处理与音频处理技术。

在智能手机、平板电脑等设备中广泛应用，为用户提供更好的使用体验。

7MBR35SB120中文资料

ton tr toff tf IRRM VFM
IRRM R
B
VCE=1200V, VGE=0V VCE=0V, VGE=±20V VCE=20V, IC=35mA VGE=15V, Ic=35A chip
terminal VGE=0V, VCE=10V, f=1MHz VCC=600V IC=35A VGE=±15V RG=33Ω
元器件交易网
7MBR35SB120
IGBT MODULE (S series) 1200V / 35A / PIM
IGBT Modules
Features
· Low VCE(sat) · Compact package · P.C. board mount · Converter diode bridge, Dynamic brake circuit
Unit V V A
A
A W V V A
A
W V V A A A2s °C °C V
N·m
元器件交易网 IGBT Modules
7MBR35SB120
Electrical characteristics (Tj=25°C unless otherwise specified)
Collector current : Ic [ A ]
[ Inverter ] Collector current vs. Collector-Emitter voltage
Tj= 25 oC (typ.) 80
VGE= 20V 15V 12V
60
10V 40
[ Inverter ] Collector current vs. Collector-Emitter voltage
Item Collector-Emitter voltage Gate-Emitter voltage