HDSP0762中文资料
5082-5501-KH000中文资料
14.2 mm (0.56 inch)Seven Segment Displays Technical DataFeatures• Industry Standard Size • Industry Standard Pinout 15.24 mm (0.6 in.) DIP Leads on 2.54 mm (0.1 in.) Centers • Choice of ColorsAlGaAs Red, High Efficiency Red, Yellow, Green, Orange • Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Gray Package Gives Optimum Contrast±50° Viewing Angle • Design FlexibilityCommon Anode or Common CathodeSingle and Dual Digits Right Hand Decimal Point ±1. Overflow Character• Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display • High Light Output • High Peak Current• Excellent for Long Digit String Multiplexing • Intensity and Color Selection OptionSee Intensity and ColorSelected Displays Data Sheet • Sunlight Viewable AlGaAsDescriptionThe 14.2 mm (0.56 inch) LED seven segment displays aredesigned for viewing distances upto 7 metres (23 feet). Thesedevices use an industry standard size package and pinout. Both the numeric and ±1 overflow devices feature a right hand decimalpoint. All devices are available as either common anode or common cathode.Orange AlGaAs Red HERYellowGreen Package HDSP-HDSP-[1]HDSP-[1]HDSP-HDSP- DescriptionDrawingH401H151550157015601Common Anode Right Hand Decimal A H403H153550357035603Common Cathode Right Hand Decimal B H157550757075607Common Anode ±1. Overflow C H158550857085608Common Cathode ±1. OverflowD K401552157215621Two Digit Common Anode Right Hand DecimalE K403552357235623Two Digit Common Cathode Right Hand DecimalFDevicesNote:1. These displays are recommended for high ambient light operation. Please refer to the HDSP-H10X/K12X AlGaAs and HDSP-555X HER data sheet for low current operation.HDSP-K40x Series HDSP-550x Series HDSP-552x Series HDSP-560x Series HDSP-562x Series HDSP-570x Series HDSP-572x Series HDSP-H15x Series HDSP-H40x SeriesThese displays are ideal for most applications. Pin for pin equivalent displays are alsoavailable in a low current design.The low current displays are idealfor portable applications. For additional information see the Low Current Seven Segment Displays data sheet.Part Numbering SystemNotes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.5082 -X X X X-X X X X X HDSP-X X X X-X X X X XMechanical Options [1]00: No Mechanical Option Color Bin Options [1,2]0: No Color Bin LimitationMaximum Intensity Bin [1,2]0: No Maximum Intensity Bin Limitation Minimum Intensity Bin [1,2]0: No Minimum Intensity Bin Limitation Device Configuration/Color [1]1: Common Anode 3: Common CathodeDevice Specific Configuration [1]Refer to Respective DatasheetPackage [1]H: 14.2 mm (0.56 inch) Single Digit Seven Segment DisplayFUNCTIONPIN AB CDEF1CATHODE e ANODE e CATHODE c ANODE cE CATHODE NO. 1 E ANODE NO. 12CATHODE d ANODE d ANODE c, d CATHODE c, d D CATHODE NO. 1 D ANODE NO. 13ANODE [3]CATHODE [4]CATHODE b ANODE bC CATHODE NO. 1 C ANODE NO. 14CATHODE c ANODE c ANODE a, b, DP CATHODE a, b, DP DP CATHODE NO. 1DP ANODE NO. 15CATHODE DP ANODE DP CATHOPDE DP ANODE DE E CATHODE NO. 1 E ANODE NO. 26CATHODE b ANODE b CATHODE a ANODE aD CATHODE NO. 2 D ANODE NO. 27CATHODE a ANODE a ANODE a, b, DP CATHODE a, b, DP G CATHODE NO. 2G ANODE NO. 28ANODE [3]CATHODE [4]ANODE c, d CATHODE c, d C CATHODE NO. 2 C ANODE NO. 29CATHODE f ANODE f CATHODE d ANODE d DP CATHODE NO. 2DP ANODE NO. 210CATHODE g ANODE g NO PINNO PINB CATHODE NO. 2 B ANODE NO. 211 A CATHODE NO. 2 A ANODE NO. 212 F CATHODE NO. 2 F ANODE NO. 213DIGIT NO. 2 ANODE DIGIT NO. 2 CATHODE 14DIGIT NO. 1 ANODE DIGIT NO. 1 CATHODE 15 B CATHODE NO. 1 B ANODE NO. 116 A CATHODE NO. 1 A ANODE NO. 117G CATHODE NO. 1G ANODE NO. 118F CATHODE NO. 1 F ANODE NO. 1NOTES:1. ALL DIMENSIONS IN MILLIMETRES (INCHES).2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.3. REDUNDANT ANODES.4. REDUNDANT CATHODES.5. FOR HDSP-5600/-5700 SERIES PRODUCT ONLY.Package DimensionsInternal Circuit DiagramNotes:1. See Figure 2 to establish pulsed conditions.2. Derate above 46°C at 0.54 mA/°C.3. See Figure 7 to establish pulsed conditions.4. Derate above 53°C at 0.45 mA/°C.5. See Figure 8 to establish pulsed conditions.HER/Orange HDSP-5500AlGaAs Red HDSP-H40x Yellow Green HDSP-H150HDSP-K40x HDSP-5700HDSP-5600 Description SeriesSeriesSeriesSeriesUnits Average Power per Segment or DP 9610580105mW Peak Forward Current per 160[1]90[3]60[5]90[7]mA Segment or DPDC Forward Current per Segment or DP 40[2]30[4]20[6]3018]mA Operating Temperature Range -20 to +100[9]-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per Segment or DP 3.0V Lead Solder Temperature for 3 Seconds 260°C(1.60 mm [0.063 in.] below seating plane)Absolute Maximum Ratings6. Derate above 81°C at 0.52 mA/°C.7. See Figure 9 to establish pulsed conditions.8. Derate above 39°C at 0.37 mA/°C.9. For operation below -20°C, contact your local Agilent components sales office or an authorized distributor.Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeriesHDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,5]I V9.116.0mcd I F = 20 mA(Digit Average)1.8I F = 20 mAForward Voltage/Segment or DP V F V2.03.0I F = 100 mAH15XPeak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-Pin400°C/W/to-Pin SegHigh Efficiency RedDeviceSeriesHDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions9002800I F = 10 mA Luminous Intensity/Segment[1,2,6]I Vµcd(Digit Average)3700I F = 60 mA Peak:1 of 6 dfForward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mA 55XXPeak WavelengthλPEAK635nmDominant Wavelength[3]λd626nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-Pin345°C/W/to-Pin SegYellowDeviceSeriesHDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions6001800I F = 10 mA Luminous Intensity/Segment[1,2]I Vµcd(Digit Average)2750I F = 60 mA Peak:1 of 6 dfForward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mA 57XXPeak WavelengthλPEAK583nmDominant Wavelength[3,7]λd581.5586592.5nmReverse Voltage/Segment or DP[4]V R 3.040V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-Pin345°C/W/to-Pin SegOrangeDeviceSeriesHDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 2.37mcd I F = 10 mA(Segment Average)[1,2]Forward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mAPeak WavelengthλPEAK600nm H40x Dominant Wavelength[3]λd603nm I F = 10 mA K40x Reverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µA Temperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-Pin345°C/W/to-Pin SegDeviceSeries HDSP-ParameterSymbol Min.Typ.Max.UnitsTest Conditions 9002500I F = 10 mALuminous Intensity/Segment [1,2]I Vµcd(Digit Average)`3100I F = 60 mA Peak:1 of 6 df Forward Voltage/Segment or DPV F 2.1 2.5V I F = 10 mA56XXPeak Wavelength λPEAK 566nm Dominant Wavelength [3,7]λd 571577nm Reverse Voltage/Segment or DP [4]V R 3.050V I R = 100 µATemperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DPThermal Resistance LED Junction-R θJ-Pin345°C/W/to-PinSegHigh Performance GreenNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd , is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-H15X series.6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the HDSP-550X series.7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter.AlGaAs RedFigure 2. Maximum Tolerable Peak Current vs. Pulse Duration – AlGaAs Red.Figure 1. Maximum Tolerable Peak Current vs.Pulse Duration – Red.Figure 3. Maximum Allowable DC Current vs.Ambient Temperature.Figure 4. Forward Current vs.Forward Voltage.HER, Yellow, Green, OrangeFigure 7. Maximum Tolerable Peak Currentvs. Pulse Duration – HER, Orange.Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration – Yellow.Figure 5. Relative Luminous Intensity vs. DC Forward Current.Figure 6. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.I D C M A X . – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AT A – AMBIENT TEMPERATURE – °C 5030102051525354045I F – F O R W A R D C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 20 m A )I F – FORWARD CURRENT PER SEGMENT – mA204010305152535ηP E A K – N O R M A L IZ E D R E L A T I V E E F F I C I E N C YI PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA40051015202530352010090807060504030T – AMBIENT TEMPERATURE – °C AI M A X – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AD C 4550110120Figure 11. Forward Current vs.Forward Voltage.Figure 9. Maximum Tolerable PeakCurrent vs. Pulse Duration – Green.Figure 10. Maximum Allowable DC Current vs.Ambient Temperature.Figure 12. Relative LuminousIntensity vs. DC Forward Current.Figure 13. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.Electrical/OpticalFor more information onelectrical/optical characteristics,please see Application Note 1005.Contrast EnhancementFor information on contrastenhancement please see Application Note 1015.Soldering/CleaningCleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from thechlorinated hydrocarbon family(methylene chloride, trichloro–ethylene, carbon tetrachloride,etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts.For information on soldering LEDs please refer to Application Note 1027.I F – F O R W A R D C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D A T 10 m A )I F – DC FORWARD CURRENT – mAηV – R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A P E R S E G M EN T )0.6I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA902070801001.61.41.31.10.90.860504030100.71.01.21.5HDSP-H15x IV Bin Category Min.Max.K 9.2016.90L 13.8025.30M 20.7038.00N 31.1056.90O 46.6085.40Intensity Bin Limits (mcd)AlGaAs RedHDSP-550x/552x IV Bin Category Min.Max.E 0.91 1.67F 1.37 2.51G 2.05 3.76H 3.08 5.64I 4.628.64J 6.9312.70K 10.3919.04HERHDSP-570x/572xIV Bin Category Min.Max.D 0.61 1.11E 0.91 1.67F 1.37 2.51G 2.05 3.76H 3.08 5.64I 4.628.64J 6.9312.70K 10.3919.04YellowHDSP-560x/562x IV Bin Category Min.Max.E 0.91 1.67F 1.37 2.51G 2.05 3.76H 3.08 5.64I 4.618.46GreenColor CategoriesNote:All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information.10HDSP-H40x/K40x IV Bin Category Min.Max.B 0.77 1.17C 0.95 1.45D 1.19 1.82E 1.49 2.27F 1.85 2.89G 2.32 3.54H 2.904.43Orange元器件交易网元器件交易网/semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(408) 654-8675Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 271 2451India, Australia, New Zealand: (+65) 271 2394Japan: (+81 3) 3335-8152(Domestic/Interna-tional), or 0120-61-1280(Domestic Only)Korea: (+65) 271 2194Malaysia, Singapore: (+65) 271 2054Taiwan: (+65) 271 2654Data subject to change.Copyright © 2002 Agilent Technologies, Inc.Obsoletes 5988-0383ENJanuary 17, 20025988-4273EN。
HDSP3356资料
Features• Low Power Consumption • Industry Standard Size• Industry Standard Pinout • Choice of Character Size7.6 mm (0.30 in), 10 mm (0.40 in), 10.9 mm (0.43 in), 14.2 mm (0.56 in), 20 mm (0.80 in)• Choice of ColorsAlGaAs Red, High Efficiency Red (HER), Yellow, Green• Excellent Appearance Evenly Lighted Segments±50° Viewing Angle• Design FlexibilityCommon Anode or Common CathodeSingle and Dual DigitLeft and Right Hand Decimal Points±1. Overflow Character• Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display• Excellent for Long Digit String Multiplexing DescriptionThese low current seven segment displays are designed for applica-tions requiring low power consumption. They are tested and selected for their excellent low current characteristics to ensure that the segments are matched at low currents. Drive currents as low as 1 mA per segment are available.Pin for pin equivalent displays are also available in a standard current or high light ambient design. The standard current displays are available in all colors and are ideal for most applica-tions. The high light ambient displays are ideal for sunlight ambients or long string lengths. For additional information see the 7.6 mm Micro Bright Seven Segment Displays, 10 mm Seven Segment Displays, 7.6 mm/10.9 mm Seven Segment Displays, 14.2 mm Seven Segment Displays, 20 mm Seven Segment Displays, or High Light Ambient Seven Segment Displays data sheets.Low Current Seven Segment DisplaysTechnical Data HDSP-335X SeriesHDSP-555X SeriesHDSP-751X SeriesHDSP-A10X Series HDSP-A80X Series HDSP-A90X Series HDSP-E10X Series HDSP-F10X Series HDSP-G10X Series HDSP-H10X Series HDSP-K12X, K70X SeriesHDSP-N10X SeriesPackage DimensionsDevicesAlGaAs HERYellow Green Package HDSP-HDSP-HDSP-HDSP-DescriptionDrawingA1017511A801A9017.6 mm Common Anode Right Hand Decimal A A1037513A803A9037.6 mm Common Cathode Right Hand Decimal B A1077517A807A9077.6 mm Common Anode ±1. Overflow C A1087518A808A9087.6 mm Common Cathode ±1. Overflow D F10110 mm Common Anode Right Hand Decimal E F10310 mm Common Cathode Right Hand Decimal F F10710 mm Common Anode ±1. Overflow G F10810 mm Common Cathode ±1. OverflowH G10110 mm Two Digit Common Anode Right Hand Decimal X G10310 mm Two Digit Common Cathode Right Hand Decimal Y E100335010.9 mm Common Anode Left Hand Decimal I E101335110.9 mm Common Anode Right Hand Decimal J E103335310.9 mm Common Cathode Right Hand Decimal K E106335610.9 mm Universal ±1. Overflow [1]L H101555114.2 mm Common Anode Right Hand Decimal M H103555314.2 mm Common Cathode Right Hand Decimal N H107555714.2 mm Common Anode ±1. Overflow O H108555814.2 mm Common Cathode ±1. OverflowP K121K70114.2 mm Two Digit Common Anode Right Hand Decimal R K123K70314.2 mm Two Digit Common Cathode Right Hand Decimal S N10020 mm Common Anode Left Hand Decimal Q N10120 mm Common Anode Right Hand Decimal T N10320 mm Common Cathode Right Hand Decimal U N10520 mm Common Cathode Left Hand Decimal V N10620 mm Universal ±1. Overflow [1]WNote:1. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagrams L or W.Package Dimensions (cont.)Package Dimensions (cont.)*The Side View of package indicates Country of Origin.Package Dimensions (cont.)Package Dimensions (cont.)元器件交易网7 Package Dimensions (cont.)Internal Circuit DiagramInternal Circuit Diagram (cont.)Absolute Maximum RatingsAlGaAs Red HERHDSP-A10X/E10X/HDSP-751X/Yellow GreenH10X/K12X/N10X/335X/555X/HDSP-A80X HDSP-A90X Description F10X, G10X Series K70X Series Series Series Units Average Power per Segment or DP375264mW Peak Forward Current per 45mA Segment or DPDC Forward Current per15[1]15[2]mA Segment or DPOperating Temperature Range-20 to +100-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per Segment 3.0V or DPLead Solder Temperature for 3Seconds (1.60 mm [0.063 in.] below 260°C seating plane)Notes:1. Derate above 91°C at 0.53 mA/°C.2. Derate HER/Yellow above 80°C at 0.38 mA/°C and Green above 71°C at 0.31 mA/°C.元器件交易网10Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions315600I F = 1 mA A10X3600I F = 5 mA330650I F = 1 mA F10X, G10X3900I F = 5 mA390650I F = 1 mA E10X Luminous Intensity/Segment[1,2]I Vµcd(Digit Average)3900I F = 5 mA400700I F = 1 mA H10X, K12X4200I F = 5 mA270590I F = 1 mA N10X3500I F = 5 mA1.6I F = 1 mAForward Voltage/Segment or DP V F 1.7V I F = 5 mA1.82.2I F = 20 mA PkAll Devices Peak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 mATemperature Coefficient of∆V F/°C-2 mV mV/°CV F/Segment or DPA10X255F10X, G10X320E10X340Thermal Resistance LED RθJ-PIN°C/W/SegH10X, K12X Junction-to-Pin400N10X430High Efficiency RedDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions160270I F = 2 mA 751X1050I F = 5 mA200300I F = 2 mA Luminous Intensity/Segment[1,2]I V mcd(Digit Average)1200I F = 5 mA335X, 555X,K70X270370I F = 2 mA1480I F = 5 mA1.6I F = 2 mAForward Voltage/Segment or DP V F 1.7V I F = 5 mA2.1 2.5I F = 20 mA Pk All Devices Peak WavelengthλPEAK635nmDominant Wavelength[3]λd626nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 mATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DP751X200335X Thermal Resistance LED RθJ-PIN280°C/WJunction-to-Pin555X, K70X345YellowDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2]250420I F = 4 mA(Digit Average)I V mcd1300I F = 10 mA1.7I F = 4 mAForward Voltage/Segment or DP V F 1.8V I F = 5 mA A80X2.1 2.5I F = 20 mA PkPeak WavelengthλPEAK583nmDominant Wavelength[3,5]λd581.5585592.5nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 mATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN200°C/WJunction-to-PinGreenDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2]250475I F = 4 mA(Digit Average)I V mcd1500I F = 10 mA1.9I F = 4 mAForward Voltage/Segment or DP V F 2.0V I F = 10 mA A90X2.1 2.5I F = 20 mA PkPeak WavelengthλPEAK566nmDominant Wavelength[3,5]λd571577nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 mATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN200°C/WJunction-to-PinNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is the single wavelength which defines the color of thedevice.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. The yellow (HDSP-A800) and Green (HDSP-A900) displays are categorized for dominant wavelength. The category is designated by anumber adjacent to the luminous intensity category letter.Data subject to change.Copyright © 1999 Agilent Technologies, Inc.5091-8365E (11/99)。
深深圳圳市市矽矽普普特特科科技技有有限限公公司司 XXPPTT88000022 用户手册说明书
深圳市矽普特科技有限公司X P T8002单通道、2.4W、A B类音频功放X P T8002用户手册2011年10月深圳市矽普特科技有限公司X P T8002单通道、2.4W、A B类音频功放芯片功能说明XPT8002是一款桥式音频功率放大器。
5V 工作电压时，最大驱动功率为2.4W，音频范围内总谐波失真噪声小于1％（20Hz～20KHz);XPT8002的应用电路简单，只需极少数外围器件；XPT8002输出不需要外接耦合电容或上举电容和缓冲网络。
XPT8002采用SOP、ESOP封装，特别适合用于小音量、小体重的便携系统。
XPT8002可以通过控制进入休眠模式，从而减少功耗;XPT8002内部具有过热自动关断保护机制XPT8002工作稳定，增益带宽积高达2.5MHz，并且单位增益稳定。
通过配置外围电阻可以调整放大器的电压增益，方便应用。
芯片主要功能特性输出功率高（THD＋N<10%，1KHz频率) 功率为2.4W（4Ω负载）掉电模式漏电流小：0.6uA（典型）采用SOP、ESOP封装外部增益可调宽工作电压范围2.0V—5.5V不需驱动输出耦合电容、自举电容和缓冲网络单位增益稳定实物图芯片应用场合手提电脑台式电脑低压音响系统芯片基本结构描述XPT8002是双端输出的音频功率放大器，在5V电压工作时，最大可以驱动输出功率为2.4W，音频范围内总谐波失真噪声小于1％（20Hz～20KHz)。
其原理框图为：芯片原理框图图1XPT8002原理框图芯片定购信息芯片型号封装类型包装类型最小包装数（PCS）备注XPT8002SO SOP8 管装100芯片的封装和引脚封装引脚图XPT8002的封装管脚图XPT8002管脚描述XPT8002管脚描述（SOP封装）管脚号符号描述1 SD 掉电控制管脚，高电平有效，2 BYP 内部共模电压旁路电容3 +IN 模拟输入端，正相4 -IN 模拟输入端，反相5 VO1 模拟输出端16 VDD 电源正7 GND 电源地8 VO2 模拟输出端2芯片特性说明芯片最大极限值芯片最大物理极限值参数最小值最大值单位说明电源电压 2.4 6 V 5.0储存温度-65 150 o C 25输入电压-0.3 VDD V内部限制功耗mW耐ESD电压1 3000 V HBM耐ESD电压2 250 V MM节温150 o C 典型值150推荐工作温度-40 85 o C 25推荐工作电压 2.0 5.5 5.0热阻焊接温度 220 o C 15秒内芯片数字逻辑特性关断信号数字逻辑特性参数最小值典型值最大值单位说明参数 最小值 典型值 最大值单位 说明 电源电压为5VVIH 1.5 V VIL 1.3 V 电源电压为3VVIH 1.3 V VIL 1.0 V 电源电压为2.6VVIH 1.2 V VIL 1.0 V电气特性除特别说明外，环境温度T A ＝25℃。
HDSP-076X资料
Package DimensionsZAbsolute Maximum RatingsDescription Symbol Min.Max.Unit Storage Temperature, Ambient T S-65+100°C Operating Temperature, Ambient[1]T A-55+85°C Supply Voltage[2]V CC-0.5+7.0V Voltage Applied to Input Logic, dp and Enable Pins V I, V DP, V E-0.5V CC V Voltage Applied to Blanking Input[2]V B-0.5V CC V Maximum Solder Temperature at 1.59 mm (0.062 inch)260°C Below Seating Plane, t ≤ 5 secondsRecommended Operating ConditionsDescription Symbol Min.Nom.Max.Unit Supply Voltage[2]V CC 4.5 5.0 5.5V Operating Temperature, Ambient[1]T A-55+85°C Enable Pulse Width t W100nsec Time Data Must Be Held Before Positive t SETUP50nsec Transition of Enable LineTime Data Must Be Held After Positive t HOLD50nsec Transition of Enable LineEnable Pulse Rise Time t TLH 1.0msec Optical Characteristics at T A = 25°C, V CC = 5.0 VNotes:1. The nominal thermal resistance of a display mounted in a socket that is soldered onto a printed circuit board is RθJA = 50°C/W/device. The device package thermal resistance is RθJ-PIN = 15°C/W/device. The thermal resistance device pin-to-ambient through the PC board should not exceed 35°C/W/device for operation at T A = +85°C.2. Voltage values are with respect to device ground, pin 6.3. These displays are categorized for luminous intensity with the intensity category designated by a letter code located on the back ofthe display package. Case temperature of the device immediately prior to the light measurement is equal to 25°C.Electrical Characteristics; T A = -55°C to +85°CNotes:4. The luminous intensity at a specific operating ambient temperature, I V (T A ) may be approximated from the following exponential equation: I (T = I (25°C) e [k (T - 25°C)].d device.6. The HDSP-0860 and HDSP-0960 series devices are categorized as to dominant wavelength with the category designated by a number on the back of the display package.7. All typical values at V CC = 5.0 V and T A = 25°C.AOperational ConsiderationsElectricalThese devices use a modified4x7 dot matrix light emitting diode to display decimal/hexa-decimal numeric information. The high efficiency red and yellow LEDs are GaAsP epitaxial layer on a GaP transparent substrate. The green LEDs are GaP epitaxial layer on a GaP transparent substrate. The LEDs are driven by constant current drivers, BCD information is accepted by the display memory when the enable line is at logic low and the data is latched when the enable is at logic high. Using the enable pulse width and data setup and hold times listed in the Recommended Operating Conditions allows data to be clocked into an array of displays at a 6.7 MHz rate.The decimal point input is activelow true and this data is latchedinto the display memory in thesame fashion as the BCD data.The decimal point LED is drivenby the on-board IC.The blanking control input on thehexadecimal displays blanks (turnsoff) the displayed informationwithout disturbing the contents ofdisplay memory. The display isblanked at a minimum thresholdlevel of 2.0 volts. When blanked,the display standby power isnominally 250 mW at T A = 25°C.MechanicalThe primary thermal path forpower dissipation is through thedevice leads. Therefore, to insurereliable operation up to anambient temperature of +85°C, itis important to maintain a case-to-ambient thermal resistance ofless than 35°C watt/device asmeasured on top of display pin 3.For information on soldering andpost solder cleaning see Applica-tion Note 1027, Soldering LEDComponents.Contrast EnhancementThese display devices aredesigned to provide an optimumON/OFF contrast when placedbehind an appropriate contrastenhancement filter. For furtherinformation, please refer toApplication Note 1015, ContrastEnhancement Techniques forLED Displays.Over Range DisplayThe over range devices display“±1” and decimal point. Thecharacter height and packageconfiguration are the same as thenumeric and hexadecimaldevices. Character selection isobtained via external switchingtransistors and current limitingresistors.Package DimensionsNotes:0: Line switching transistor in Figure 7 cutoff.1: Line switching transistor in Figure 7 saturated.X: 'don't care'Absolute Maximum RatingsDescriptionSymbol Min.Max.Unit Storage Temperature, Ambient T S-65+100°C Operating Temperature, Ambient T A -55+85°C Forward Current, Each LED I F 10mA Reverse Voltage, Each LEDV R5VLuminous Intensity per LED[3,4]Figure 3. Typical Driving Circuit.Electrical Characteristics: T= -55°C to +85°CNote:Test conditions as specified in Optical Characteristic table.Intensity Bin Limits for HDSP-0760Note:Test conditions as specified in Optical Characteristic table.Intensity Bin Limits for HDSP-0770Intensity Bin Limits for HDSP-0860Note:Test conditions as specified in Optical Characteristic table.Intensity Bin Limits for HDSP-0960Note:Test conditions as specified in Optical Characteristic table.Color Bin LimitsNote:Test conditions as specified in Optical Characteristic table.Data subject to change.Copyright © 2001 Agilent Technologies, Inc.June 15, 2001Obsoletes 5963-7395E (11/99)5988-2260EN。
HDSP-A2XC中文资料
Agilent HDSP-A2XC SeriesAlphanumeric Display, 0.54" (13.7 mm)2 Character As AlInGaP RedData SheetFeatures•As AlInGaP red color •Gray face paintGray package gives optimum contrast •Design flexibilityCommon anode or common cathodeApplications•Suitable for alphanumeric •Operating temperature range –40˚C to 105˚CDevices As AlInGaP Red Description HDSP-A22C Common Anode HDSP-A27CCommon CathodeDescriptionThese 0.54" (13.7 mm) AS AlInGaP displays are available in either common anode or common cathode.Package Dimensions6.75 [0.266] 5.95 [0.234]25.20 [0.992]8.17[0.322]1.20[0.047]13.80 [0.543]7.00 [0.276]21.00 [0.827]15.24 [0.600]NOTES:1. ALL DIMENSIONS ARE IN MILLIMETERS [INCHES]2. UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm3.70 [0.146]20.32[0.800]Internal CircuitPin Configuration A Pin Configuration B Pin Common Anode Common Cathode 11E/2E Cathode 1E/2E Anode 21M/2M Cathode 1M/2M Anode 3No Connection No Connection 41L/2L Cathode 1L/2L Anode 51K/2K Cathode 1K/2K Anode 61J/2J Cathode 1J/2J Anode 71D/2D Cathode 1D/2D Anode 8DP1 Cathode DP1 Anode 91C/2C Cathode 1C/2C Anode 101B/2B Cathode1B/2B Anode11DIGIT No. 2 Common Anode DIGIT No. 2 Common Cathode 121A/2A Cathode 1A/2A Anode 131N/2N Cathode 1N/2N Anode 141H/2H Cathode 1H/2H Anode 151G/2G Cathode1G/2G Anode16DIGIT No. 1 Common Anode DIGIT No. 1 Common Cathode 171P/2P Cathode 1P/2P Anode 181F/2F Cathode 1F/2F AnodeCOMMON ANODECOMMON CATHODECOM 1 DIG 1 COM 2COM 1 DIG 1COM 2 DIG 1DIG 2DP1DP2A B G H CDE F JK L M NPAbsolute Maximum Ratings at T A = 25˚CParameter Symbol HDSP-A22C/HDSP-A27C UnitsDC Forward Current per Segment or DP[1,2,3]I F50mAPeak Forward Current per Segment or DP[2,3]I PEAK100mA Average Forward Current[3]I AVE30mA Reverse Voltage per Segment or DP (I R = 100 µA)V R5V Operating Temperature T O–40 to +105˚C Storage Temperature T S–40 to +120˚CLead Soldering Conditions Temperature260˚CTime3sNotes:1.Derate linearly as shown in Figure 1.2.For long term performance with minimal light output degradation, drive currents between 10 mA and 30 mA are recommended. For more information on recommended drive conditions, please refer to Application Brief I-024 (5966-3087E).3.Operating at currents below 1 mA is not recommended. Please contact your local representative for further information.Optical/Electrical Characteristics at T A = 25˚CDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test ConditionsA22C Forward Voltage I V 1.70 1.90 2.20V I F = 20 mAA27C Reverse Voltage V R520V I F = 100 µA Peak WavelengthλPEAK635nm Peak Wavelengthof Spectral Distri-bution at I F = 20 mA Dominant Wavelength[3]λd622.5626630nmSpectral Halfwidth∆λ1/217nm Wavelength Widthat Spectral Distri-bution 1/2 PowerPoint at I F = 20 mA Speed of Responseτs20ns Exponential TimeConstant, e-tτs Capacitance C40pF V F = 0, f = 1 MHzIntensity Bin Limits[1](mcd at 10 mA)Bin Name Min.[2]Max.[2]T18.025.0U25.036.0Notes:1.Bin categories are established forclassification of products. Products maynot be available in all bin categories.2.Tolerance for each bin limit is ± 10%. Data subject to change.Copyright © 2001 Agilent Technologies, Inc.November 20, 20015988-4821ENFigure 1. Maximum forward current vs.ambient temperature. Derating based on T JMAX = 130˚C.Figure 2. Forward current vs. forwrad voltage.I F – M A X I M U M A V E R A G E C U R R E N T – m A00T A – AMBIENT TEMPERATURE – ˚C60301204010202040506080100I F – F O R W A R D C U R R E N T P E R S E G M E N T – m A00V F – FORWARD VOLTAGE – V12060 2.0 3.08020 1.0 2.540 1.5100Contrast EnhancementFor information on contrast enhancement, please see Application Note 1015.Soldering/CleaningCleaning agents from ketone family (acetone, methyl ethyl ketone, etc.) and from thechlorinated hydrocarbon family (methylene chloride,trichloroethylene, carbon tetrachloride, etc.) are notrecommended for cleaning LED parts. All of these varioussolvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts.For information on soldering LEDs, please refer to Application Note 1027.。
HDSP中文资料
Features• Low Power Consumption • Industry Standard Size• Industry Standard Pinout • Choice of Character Size7.6 mm (0.30 in), 10 mm (0.40 in), 10.9 mm (0.43 in), 14.2 mm (0.56 in), 20 mm (0.80 in)• Choice of ColorsAlGaAs Red, High Efficiency Red (HER), Yellow, Green• Excellent Appearance Evenly Lighted Segments±50° Viewing Angle• Design FlexibilityCommon Anode or Common CathodeSingle and Dual DigitLeft and Right Hand Decimal Points±1. Overflow Character• Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display• Excellent for Long Digit String Multiplexing DescriptionThese low current seven segment displays are designed for applica-tions requiring low power consumption. They are tested and selected for their excellent low current characteristics to ensure that the segments are matched at low currents. Drive currents as low as 1 mA per segment are available.Pin for pin equivalent displays are also available in a standard current or high light ambient design. The standard current displays are available in all colors and are ideal for most applica-tions. The high light ambient displays are ideal for sunlight ambients or long string lengths. For additional information see the 7.6 mm Micro Bright Seven Segment Displays, 10 mm Seven Segment Displays, 7.6 mm/10.9 mm Seven Segment Displays, 14.2 mm Seven Segment Displays, 20 mm Seven Segment Displays, or High Light Ambient Seven Segment Displays data sheets.Low Current Seven SegmentDisplays Technical Data HDSP-335x SeriesHDSP-555x SeriesHDSP-751x SeriesHDSP-A10x Series HDSP-A80x Series HDSP-A90x Series HDSP-E10x Series HDSP-F10x Series HDSP-G10x Series HDSP-H10x Series HDSP-K12x, K70x Series HDSP-N10x SeriesHDSP-N40x SeriesDevicesAlGaAs HER Yellow Green Package HDSP-HDSP-HDSP-HDSP-Description Drawing A1017511A801A9017.6 mm Common Anode Right Hand Decimal A A1037513A803A9037.6 mm Common Cathode Right Hand Decimal B A1077517A807A9077.6 mm Common Anode ±1. Overflow C A1087518A808A9087.6 mm Common Cathode ±1. Overflow D F10110 mm Common Anode Right Hand Decimal E F10310 mm Common Cathode Right Hand Decimal F F10710 mm Common Anode ±1. Overflow G F10810 mm Common Cathode ±1. Overflow H G10110 mm Two Digit Common Anode Right Hand Decimal X G10310 mm Two Digit Common Cathode Right Hand Decimal Y E100335010.9 mm Common Anode Left Hand Decimal I E101335110.9 mm Common Anode Right Hand Decimal J E103335310.9 mm Common Cathode Right Hand Decimal K E106335610.9 mm Universal ±1. Overflow[1]L H101555114.2 mm Common Anode Right Hand Decimal M H103555314.2 mm Common Cathode Right Hand Decimal N H107555714.2 mm Common Anode ±1. Overflow O H108555814.2 mm Common Cathode ±1. Overflow P K121K70114.2 mm Two Digit Common Anode Right Hand Decimal R K123K70314.2 mm Two Digit Common Cathode Right Hand Decimal S N10020 mm Common Anode Left Hand Decimal Q N101N40120 mm Common Anode Right Hand Decimal T N103N40320 mm Common Cathode Right Hand Decimal U N10520 mm Common Cathode Left Hand Decimal V N106N40620 mm Universal ±1. Overflow[1]W Note:1. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagrams L or W.Part Numbering System5082-x xx x-x x x xxHDSP-x xx x-x x x xxMechanical Options[1]00: No mechanical optionColor Bin Options[1,2]0: No color bin limitationMaximum Intensity Bin[1,2]0: No maximum intensity bin limitationMinimum Intensity Bin[1,2]0: No minimum intensity bin limitationDevice Configuration/Color[1]G: GreenDevice Specific Configuration[1]Refer to respective datasheetPackage[1]Refer to Respective datasheetNotes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative fordetails.2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube (excep-tions may apply). Please refer to respective datasheet for specific bin limit information.Package DimensionsPackage Dimensions (cont.)Package Dimensions (cont.)*The Side View of package indicates Country of Origin.Package Dimensions (cont.)Package Dimensions (cont.)Package Dimensions (cont.)Internal Circuit DiagramInternal Circuit Diagram (cont.)Absolute Maximum RatingsAlGaAs Red - HDSP-HERA10X/E10X/H10X HDSP-751X/Yellow GreenK12X/N10X/N40X335X/555X/HDSP-A80X HDSP-A90X Description F10X, G10X Series K70X Series Series Series Units Average Power per Segment or DP375264mW Peak Forward Current per 45mA Segment or DPDC Forward Current per15[1]15[2]mA Segment or DPOperating Temperature Range-20 to +100-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per Segment 3.0V or DPWave Soldering Temperature for 3Seconds (1.60 mm [0.063 in.] below 250°C seating body)Notes:1. Derate above 91°C at 0.53 mA/°C.2. Derate HER/Yellow above 80°C at 0.38 mA/°C and Green above 71°C at 0.31 mA/°C.Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions315600I F = 1 mA A10x3600I F = 5 mA330650I F = 1 mAF10x, G10x3900I F = 5 mA390650I F = 1 mA E10x Luminous Intensity/Segment[1,2]I Vµcd(Digit Average)3900I F = 5 mA400700I F = 1 mAH10x, K12x4200I F = 5 mA270590I F = 1 mAN10x, N40x3500I F = 5 mA1.6I F = 1 mAForward Voltage/Segment or DP V F 1.7V I F = 5 mA1.82.2I F = 20 mA PkAll Devices Peak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2 mV mV/°CV F/Segment or DPA10x255F10x, G10x320E10x340Thermal Resistance LED RθJ-PIN°C/W/SegH10x, K12x Junction-to-Pin400N10x, N40x430High Efficiency RedDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions160270I F = 2 mA 751x1050I F = 5 mA200300I F = 2 mA Luminous Intensity/Segment[1,2]I V mcd(Digit Average)1200I F = 5 mA335x, 555x,K70x270370I F = 2 mA1480I F = 5 mA1.6I F = 2 mAForward Voltage/Segment or DP V F 1.7V I F = 5 mA2.1 2.5I F = 20 mA Pk All Devices Peak WavelengthλPEAK635nmDominant Wavelength[3]λd626nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DP751x200335x Thermal Resistance LED RθJ-PIN280°C/WJunction-to-Pin555x, K70x345YellowDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2]250420I F = 4 mA(Digit Average)I V mcd1300I F = 10 mA1.7I F = 4 mAForward Voltage/Segment or DP V F 1.8V I F = 5 mA A80x2.1 2.5I F = 20 mA PkPeak WavelengthλPEAK583nmDominant Wavelength[3,5]λd581.5585592.5nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN200°C/WJunction-to-PinGreenDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2]250475I F = 4 mA(Digit Average)I V mcd1500I F = 10 mA1.9I F = 4 mAForward Voltage/Segment or DP V F 2.0V I F = 10 mA A90x2.1 2.5I F = 20 mA PkPeak WavelengthλPEAK566nmDominant Wavelength[3,5]λd571577nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN200°C/WJunction-to-PinNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is the single wavelength which defines the color of thedevice.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. The yellow (HDSP-A800) and Green (HDSP-A900) displays are categorized for dominant wavelength. The category is designated by anumber adjacent to the luminous intensity category letter.AlGaAs RedIntensity Bin Limits (mcd)AlGaAs RedHDSP-A10xIV Bin Category Min.Max.E0.3150.520F0.4280.759G0.621 1.16H0.945 1.71I 1.40 2.56J 2.10 3.84K 3.14 5.75L 4.708.55HDSP-E10x/F10x/G10xIV Bin Category Min.Max.D0.3910.650E0.5320.923F0.755 1.39G 1.13 2.08H 1.70 3.14HDSP-H10x/K12xIV Bin Category Min.Max.C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50HDSP-N10xIV Bin Category Min.Max.A0.2700.400B0.3250.500C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50Intensity Bin Limits (mcd), continued HERHDSP-751xIV Bin Category Min.Max.B0.1600.240C0.2000.300D0.2500.385E0.3150.520F0.4280.759G0.621 1.16HDSP-751xIV Bin Category Min.Max.B0.2400.366C0.3000.477D0.3910.650E0.5320.923F0.755 1.39G 1.13 2.08H 1.70 3.14HDSP-555x/K70xIV Bin Category Min.Max.A0.2700.400B0.3250.500C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50Intensity Bin Limits (mcd), continued YellowHDSP-A80xIV Bin Category Min.Max.D0.2500.385E0.3150.520F0.4250.760G0.625 1.14H0.940 1.70I 1.40 2.56J 2.10 3.84K 3.14 5.76L 4.718.64M7.0713.00N10.6019.40O15.9029.20P23.9043.80Q35.8065.60GreenHDSP-A90xIV Bin Category Min.Max.E0.3150.520F0.4250.760G0.625 1.14H0.940 1.70I 1.40 2.56J 2.10 3.84K 3.14 5.76L 4.718.64M7.0713.00N10.6019.40O15.9029.20P23.9043.80Q35.8065.60Electrical/OpticalFor more information on electrical/optical characteristics, please see Application Note 1005.Contrast Enhancement For information on contrast enhancement, please see Application Note 1015.Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chorinated hydrocarbon family (methylene chloride, trichloro-ethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts.For information on soldering LEDs, please refer to Application Note 1027.Note:All categories are established for classification of products. Productsmay not be available in all categories. Please contact your localAgilent representatives for further clarification/information.Color Categories/semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(916) 788 6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6271 2451India, Australia, New Zealand: (+65) 6271 2394Japan: (+81 3) 3335-8152(Domestic/International), or0120-61-1280(Domestic Only)Korea: (+65) 6271 2194Malaysia, Singapore: (+65) 6271 2054Taiwan: (+65) 6271 2654Data subject to change.Copyright © 2005 Agilent Technologies, Inc.Obsoletes 5988-8412ENJanuary 19, 20055989-0080EN。
HDSP-5507-IJ000中文资料
14.2 mm (0.56 inch)Seven Segment Displays Technical DataFeatures• Industry Standard Size • Industry Standard Pinout 15.24 mm (0.6 in.) DIP Leads on 2.54 mm (0.1 in.) Centers • Choice of ColorsAlGaAs Red, High Efficiency Red, Yellow, Green, Orange • Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Gray Package Gives Optimum Contrast±50° Viewing Angle • Design FlexibilityCommon Anode or Common CathodeSingle and Dual Digits Right Hand Decimal Point ±1. Overflow Character• Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display • High Light Output • High Peak Current• Excellent for Long Digit String Multiplexing • Intensity and Color Selection OptionSee Intensity and ColorSelected Displays Data Sheet • Sunlight Viewable AlGaAsDescriptionThe 14.2 mm (0.56 inch) LED seven segment displays aredesigned for viewing distances upto 7 metres (23 feet). Thesedevices use an industry standard size package and pinout. Both the numeric and ±1 overflow devices feature a right hand decimalpoint. All devices are available as either common anode or common cathode.Orange AlGaAs Red HERYellowGreen Package HDSP-HDSP-[1]HDSP-[1]HDSP-HDSP- DescriptionDrawingH401H151550157015601Common Anode Right Hand Decimal A H403H153550357035603Common Cathode Right Hand Decimal B H157550757075607Common Anode ±1. Overflow C H158550857085608Common Cathode ±1. OverflowD K401552157215621Two Digit Common Anode Right Hand DecimalE K403552357235623Two Digit Common Cathode Right Hand DecimalFDevicesNote:1. These displays are recommended for high ambient light operation. Please refer to the HDSP-H10X/K12X AlGaAs and HDSP-555X HER data sheet for low current operation.HDSP-K40x Series HDSP-550x Series HDSP-552x Series HDSP-560x Series HDSP-562x Series HDSP-570x Series HDSP-572x Series HDSP-H15x Series HDSP-H40x SeriesThese displays are ideal for most applications. Pin for pin equivalent displays are alsoavailable in a low current design.The low current displays are idealfor portable applications. For additional information see the Low Current Seven Segment Displays data sheet.Part Numbering SystemNotes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.5082 -X X X X-X X X X X HDSP-X X X X-X X X X XMechanical Options [1]00: No Mechanical Option Color Bin Options [1,2]0: No Color Bin LimitationMaximum Intensity Bin [1,2]0: No Maximum Intensity Bin Limitation Minimum Intensity Bin [1,2]0: No Minimum Intensity Bin Limitation Device Configuration/Color [1]1: Common Anode 3: Common CathodeDevice Specific Configuration [1]Refer to Respective DatasheetPackage [1]H: 14.2 mm (0.56 inch) Single Digit Seven Segment DisplayFUNCTIONPIN AB CDEF1CATHODE e ANODE e CATHODE c ANODE cE CATHODE NO. 1 E ANODE NO. 12CATHODE d ANODE d ANODE c, d CATHODE c, d D CATHODE NO. 1 D ANODE NO. 13ANODE [3]CATHODE [4]CATHODE b ANODE bC CATHODE NO. 1 C ANODE NO. 14CATHODE c ANODE c ANODE a, b, DP CATHODE a, b, DP DP CATHODE NO. 1DP ANODE NO. 15CATHODE DP ANODE DP CATHOPDE DP ANODE DE E CATHODE NO. 1 E ANODE NO. 26CATHODE b ANODE b CATHODE a ANODE aD CATHODE NO. 2 D ANODE NO. 27CATHODE a ANODE a ANODE a, b, DP CATHODE a, b, DP G CATHODE NO. 2G ANODE NO. 28ANODE [3]CATHODE [4]ANODE c, d CATHODE c, d C CATHODE NO. 2 C ANODE NO. 29CATHODE f ANODE f CATHODE d ANODE d DP CATHODE NO. 2DP ANODE NO. 210CATHODE g ANODE g NO PINNO PINB CATHODE NO. 2 B ANODE NO. 211 A CATHODE NO. 2 A ANODE NO. 212 F CATHODE NO. 2 F ANODE NO. 213DIGIT NO. 2 ANODE DIGIT NO. 2 CATHODE 14DIGIT NO. 1 ANODE DIGIT NO. 1 CATHODE 15 B CATHODE NO. 1 B ANODE NO. 116 A CATHODE NO. 1 A ANODE NO. 117G CATHODE NO. 1G ANODE NO. 118F CATHODE NO. 1 F ANODE NO. 1NOTES:1. ALL DIMENSIONS IN MILLIMETRES (INCHES).2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.3. REDUNDANT ANODES.4. REDUNDANT CATHODES.5. FOR HDSP-5600/-5700 SERIES PRODUCT ONLY.Package DimensionsInternal Circuit DiagramNotes:1. See Figure 2 to establish pulsed conditions.2. Derate above 46°C at 0.54 mA/°C.3. See Figure 7 to establish pulsed conditions.4. Derate above 53°C at 0.45 mA/°C.5. See Figure 8 to establish pulsed conditions.HER/Orange HDSP-5500AlGaAs Red HDSP-H40x Yellow Green HDSP-H150HDSP-K40x HDSP-5700HDSP-5600 Description SeriesSeriesSeriesSeriesUnits Average Power per Segment or DP 9610580105mW Peak Forward Current per 160[1]90[3]60[5]90[7]mA Segment or DPDC Forward Current per Segment or DP 40[2]30[4]20[6]3018]mA Operating Temperature Range -20 to +100[9]-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per Segment or DP 3.0V Lead Solder Temperature for 3 Seconds 260°C(1.60 mm [0.063 in.] below seating plane)Absolute Maximum Ratings6. Derate above 81°C at 0.52 mA/°C.7. See Figure 9 to establish pulsed conditions.8. Derate above 39°C at 0.37 mA/°C.9. For operation below -20°C, contact your local Agilent components sales office or an authorized distributor.Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeriesHDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,5]I V9.116.0mcd I F = 20 mA(Digit Average)1.8I F = 20 mAForward Voltage/Segment or DP V F V2.03.0I F = 100 mAH15XPeak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-Pin400°C/W/to-Pin SegHigh Efficiency RedDeviceSeriesHDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions9002800I F = 10 mA Luminous Intensity/Segment[1,2,6]I Vµcd(Digit Average)3700I F = 60 mA Peak:1 of 6 dfForward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mA 55XXPeak WavelengthλPEAK635nmDominant Wavelength[3]λd626nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-Pin345°C/W/to-Pin SegYellowDeviceSeriesHDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions6001800I F = 10 mA Luminous Intensity/Segment[1,2]I Vµcd(Digit Average)2750I F = 60 mA Peak:1 of 6 dfForward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mA 57XXPeak WavelengthλPEAK583nmDominant Wavelength[3,7]λd581.5586592.5nmReverse Voltage/Segment or DP[4]V R 3.040V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-Pin345°C/W/to-Pin SegOrangeDeviceSeriesHDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 2.37mcd I F = 10 mA(Segment Average)[1,2]Forward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mAPeak WavelengthλPEAK600nm H40x Dominant Wavelength[3]λd603nm I F = 10 mA K40x Reverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µA Temperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-Pin345°C/W/to-Pin SegDeviceSeries HDSP-ParameterSymbol Min.Typ.Max.UnitsTest Conditions 9002500I F = 10 mALuminous Intensity/Segment [1,2]I Vµcd(Digit Average)`3100I F = 60 mA Peak:1 of 6 df Forward Voltage/Segment or DPV F 2.1 2.5V I F = 10 mA56XXPeak Wavelength λPEAK 566nm Dominant Wavelength [3,7]λd 571577nm Reverse Voltage/Segment or DP [4]V R 3.050V I R = 100 µATemperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DPThermal Resistance LED Junction-R θJ-Pin345°C/W/to-PinSegHigh Performance GreenNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd , is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-H15X series.6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the HDSP-550X series.7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter.AlGaAs RedFigure 2. Maximum Tolerable Peak Current vs. Pulse Duration – AlGaAs Red.Figure 1. Maximum Tolerable Peak Current vs.Pulse Duration – Red.Figure 3. Maximum Allowable DC Current vs.Ambient Temperature.Figure 4. Forward Current vs.Forward Voltage.HER, Yellow, Green, OrangeFigure 7. Maximum Tolerable Peak Currentvs. Pulse Duration – HER, Orange.Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration – Yellow.Figure 5. Relative Luminous Intensity vs. DC Forward Current.Figure 6. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.I D C M A X . – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AT A – AMBIENT TEMPERATURE – °C 5030102051525354045I F – F O R W A R D C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 20 m A )I F – FORWARD CURRENT PER SEGMENT – mA204010305152535ηP E A K – N O R M A L IZ E D R E L A T I V E E F F I C I E N C YI PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA40051015202530352010090807060504030T – AMBIENT TEMPERATURE – °C AI M A X – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AD C 4550110120Figure 11. Forward Current vs.Forward Voltage.Figure 9. Maximum Tolerable PeakCurrent vs. Pulse Duration – Green.Figure 10. Maximum Allowable DC Current vs.Ambient Temperature.Figure 12. Relative LuminousIntensity vs. DC Forward Current.Figure 13. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.Electrical/OpticalFor more information onelectrical/optical characteristics,please see Application Note 1005.Contrast EnhancementFor information on contrastenhancement please see Application Note 1015.Soldering/CleaningCleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from thechlorinated hydrocarbon family(methylene chloride, trichloro–ethylene, carbon tetrachloride,etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts.For information on soldering LEDs please refer to Application Note 1027.I F – F O R W A R D C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D A T 10 m A )I F – DC FORWARD CURRENT – mAηV – R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A P E R S E G M EN T )0.6I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA902070801001.61.41.31.10.90.860504030100.71.01.21.5HDSP-H15x IV Bin Category Min.Max.K 9.2016.90L 13.8025.30M 20.7038.00N 31.1056.90O 46.6085.40Intensity Bin Limits (mcd)AlGaAs RedHDSP-550x/552x IV Bin Category Min.Max.E 0.91 1.67F 1.37 2.51G 2.05 3.76H 3.08 5.64I 4.628.64J 6.9312.70K 10.3919.04HERHDSP-570x/572xIV Bin Category Min.Max.D 0.61 1.11E 0.91 1.67F 1.37 2.51G 2.05 3.76H 3.08 5.64I 4.628.64J 6.9312.70K 10.3919.04YellowHDSP-560x/562x IV Bin Category Min.Max.E 0.91 1.67F 1.37 2.51G 2.05 3.76H 3.08 5.64I 4.618.46GreenColor CategoriesNote:All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information.10HDSP-H40x/K40x IV Bin Category Min.Max.B 0.77 1.17C 0.95 1.45D 1.19 1.82E 1.49 2.27F 1.85 2.89G 2.32 3.54H 2.904.43Orange元器件交易网元器件交易网/semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(408) 654-8675Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 271 2451India, Australia, New Zealand: (+65) 271 2394Japan: (+81 3) 3335-8152(Domestic/Interna-tional), or 0120-61-1280(Domestic Only)Korea: (+65) 271 2194Malaysia, Singapore: (+65) 271 2054Taiwan: (+65) 271 2654Data subject to change.Copyright © 2002 Agilent Technologies, Inc.Obsoletes 5988-0383ENJanuary 17, 20025988-4273EN。
HDSP-3353-G0000中文资料
Features• Low Power Consumption • Industry Standard Size• Industry Standard Pinout • Choice of Character Size7.6 mm (0.30 in), 10 mm (0.40 in), 10.9 mm (0.43 in), 14.2 mm (0.56 in), 20 mm (0.80 in)• Choice of ColorsAlGaAs Red, High Efficiency Red (HER), Yellow, Green• Excellent Appearance Evenly Lighted Segments±50° Viewing Angle• Design FlexibilityCommon Anode or Common CathodeSingle and Dual DigitLeft and Right Hand Decimal Points±1. Overflow Character• Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display• Excellent for Long Digit String Multiplexing DescriptionThese low current seven segment displays are designed for applica-tions requiring low power consumption. They are tested and selected for their excellent low current characteristics to ensure that the segments are matched at low currents. Drive currents as low as 1 mA per segment are available.Pin for pin equivalent displays are also available in a standard current or high light ambient design. The standard current displays are available in all colors and are ideal for most applica-tions. The high light ambient displays are ideal for sunlight ambients or long string lengths. For additional information see the 7.6 mm Micro Bright Seven Segment Displays, 10 mm Seven Segment Displays, 7.6 mm/10.9 mm Seven Segment Displays, 14.2 mm Seven Segment Displays, 20 mm Seven Segment Displays, or High Light Ambient Seven Segment Displays data sheets.Low Current Seven SegmentDisplays Technical Data HDSP-335x SeriesHDSP-555x SeriesHDSP-751x SeriesHDSP-A10x Series HDSP-A80x Series HDSP-A90x Series HDSP-E10x Series HDSP-F10x Series HDSP-G10x Series HDSP-H10x Series HDSP-K12x, K70x Series HDSP-N10x SeriesHDSP-N40x SeriesDevicesAlGaAs HER Yellow Green Package HDSP-HDSP-HDSP-HDSP-Description Drawing A1017511A801A9017.6 mm Common Anode Right Hand Decimal A A1037513A803A9037.6 mm Common Cathode Right Hand Decimal B A1077517A807A9077.6 mm Common Anode ±1. Overflow C A1087518A808A9087.6 mm Common Cathode ±1. Overflow D F10110 mm Common Anode Right Hand Decimal E F10310 mm Common Cathode Right Hand Decimal F F10710 mm Common Anode ±1. Overflow G F10810 mm Common Cathode ±1. Overflow H G10110 mm Two Digit Common Anode Right Hand Decimal X G10310 mm Two Digit Common Cathode Right Hand Decimal Y E100335010.9 mm Common Anode Left Hand Decimal I E101335110.9 mm Common Anode Right Hand Decimal J E103335310.9 mm Common Cathode Right Hand Decimal K E106335610.9 mm Universal ±1. Overflow[1]L H101555114.2 mm Common Anode Right Hand Decimal M H103555314.2 mm Common Cathode Right Hand Decimal N H107555714.2 mm Common Anode ±1. Overflow O H108555814.2 mm Common Cathode ±1. Overflow P K121K70114.2 mm Two Digit Common Anode Right Hand Decimal R K123K70314.2 mm Two Digit Common Cathode Right Hand Decimal S N10020 mm Common Anode Left Hand Decimal Q N101N40120 mm Common Anode Right Hand Decimal T N103N40320 mm Common Cathode Right Hand Decimal U N10520 mm Common Cathode Left Hand Decimal V N106N40620 mm Universal ±1. Overflow[1]W Note:1. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagrams L or W.Part Numbering System5082-x xx x-x x x xxHDSP-x xx x-x x x xxMechanical Options[1]00: No mechanical optionColor Bin Options[1,2]0: No color bin limitationMaximum Intensity Bin[1,2]0: No maximum intensity bin limitationMinimum Intensity Bin[1,2]0: No minimum intensity bin limitationDevice Configuration/Color[1]G: GreenDevice Specific Configuration[1]Refer to respective datasheetPackage[1]Refer to Respective datasheetNotes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative fordetails.2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube (excep-tions may apply). Please refer to respective datasheet for specific bin limit information.Package DimensionsPackage Dimensions (cont.)Package Dimensions (cont.)*The Side View of package indicates Country of Origin.Package Dimensions (cont.)Package Dimensions (cont.)Package Dimensions (cont.)Internal Circuit DiagramInternal Circuit Diagram (cont.)Absolute Maximum RatingsAlGaAs Red - HDSP-HERA10X/E10X/H10X HDSP-751X/Yellow GreenK12X/N10X/N40X335X/555X/HDSP-A80X HDSP-A90X Description F10X, G10X Series K70X Series Series Series Units Average Power per Segment or DP375264mW Peak Forward Current per 45mA Segment or DPDC Forward Current per15[1]15[2]mA Segment or DPOperating Temperature Range-20 to +100-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per Segment 3.0V or DPWave Soldering Temperature for 3Seconds (1.60 mm [0.063 in.] below 250°C seating body)Notes:1. Derate above 91°C at 0.53 mA/°C.2. Derate HER/Yellow above 80°C at 0.38 mA/°C and Green above 71°C at 0.31 mA/°C.Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions315600I F = 1 mA A10x3600I F = 5 mA330650I F = 1 mAF10x, G10x3900I F = 5 mA390650I F = 1 mA E10x Luminous Intensity/Segment[1,2]I Vµcd(Digit Average)3900I F = 5 mA400700I F = 1 mAH10x, K12x4200I F = 5 mA270590I F = 1 mAN10x, N40x3500I F = 5 mA1.6I F = 1 mAForward Voltage/Segment or DP V F 1.7V I F = 5 mA1.82.2I F = 20 mA PkAll Devices Peak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2 mV mV/°CV F/Segment or DPA10x255F10x, G10x320E10x340Thermal Resistance LED RθJ-PIN°C/W/SegH10x, K12x Junction-to-Pin400N10x, N40x430High Efficiency RedDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions160270I F = 2 mA 751x1050I F = 5 mA200300I F = 2 mA Luminous Intensity/Segment[1,2]I V mcd(Digit Average)1200I F = 5 mA335x, 555x,K70x270370I F = 2 mA1480I F = 5 mA1.6I F = 2 mAForward Voltage/Segment or DP V F 1.7V I F = 5 mA2.1 2.5I F = 20 mA Pk All Devices Peak WavelengthλPEAK635nmDominant Wavelength[3]λd626nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DP751x200335x Thermal Resistance LED RθJ-PIN280°C/WJunction-to-Pin555x, K70x345YellowDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2]250420I F = 4 mA(Digit Average)I V mcd1300I F = 10 mA1.7I F = 4 mAForward Voltage/Segment or DP V F 1.8V I F = 5 mA A80x2.1 2.5I F = 20 mA PkPeak WavelengthλPEAK583nmDominant Wavelength[3,5]λd581.5585592.5nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN200°C/WJunction-to-PinGreenDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2]250475I F = 4 mA(Digit Average)I V mcd1500I F = 10 mA1.9I F = 4 mAForward Voltage/Segment or DP V F 2.0V I F = 10 mA A90x2.1 2.5I F = 20 mA PkPeak WavelengthλPEAK566nmDominant Wavelength[3,5]λd571577nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN200°C/WJunction-to-PinNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is the single wavelength which defines the color of thedevice.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. The yellow (HDSP-A800) and Green (HDSP-A900) displays are categorized for dominant wavelength. The category is designated by anumber adjacent to the luminous intensity category letter.Figure 1. Maximum AllowableAverage or DC Current vs. Ambient Temperature.Figure 2. Forward Current vs.Forward Voltage.AlGaAs RedFigure 4. Relative Efficiency (Luminous Intensity per UnitCurrent) vs. Peak Current.Figure 3. Relative Luminous Intensity vs. DC Forward Current.Figure 5. Maximum Allowable Average or DC Current vs. Ambient Temperature.Figure 6. Forward Current vs. Forward Voltage.HER, Yellow, GreenFigure 7. Relative Luminous Intensityvs. DC Forward Current.Figure 8. Relative Efficiency(Luminous Intensity per UnitCurrent) vs. Peak Current.Intensity Bin Limits (mcd)AlGaAs RedHDSP-A10xIV Bin Category Min.Max.E0.3150.520F0.4280.759G0.621 1.16H0.945 1.71I 1.40 2.56J 2.10 3.84K 3.14 5.75L 4.708.55HDSP-E10x/F10x/G10xIV Bin Category Min.Max.D0.3910.650E0.5320.923F0.755 1.39G 1.13 2.08H 1.70 3.14HDSP-H10x/K12xIV Bin Category Min.Max.C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50HDSP-N10xIV Bin Category Min.Max.A0.2700.400B0.3250.500C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50Intensity Bin Limits (mcd), continued HERHDSP-751xIV Bin Category Min.Max.B0.1600.240C0.2000.300D0.2500.385E0.3150.520F0.4280.759G0.621 1.16HDSP-751xIV Bin Category Min.Max.B0.2400.366C0.3000.477D0.3910.650E0.5320.923F0.755 1.39G 1.13 2.08H 1.70 3.14HDSP-555x/K70xIV Bin Category Min.Max.A0.2700.400B0.3250.500C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50Intensity Bin Limits (mcd), continued YellowHDSP-A80xIV Bin Category Min.Max.D0.2500.385E0.3150.520F0.4250.760G0.625 1.14H0.940 1.70I 1.40 2.56J 2.10 3.84K 3.14 5.76L 4.718.64M7.0713.00N10.6019.40O15.9029.20P23.9043.80Q35.8065.60GreenHDSP-A90xIV Bin Category Min.Max.E0.3150.520F0.4250.760G0.625 1.14H0.940 1.70I 1.40 2.56J 2.10 3.84K 3.14 5.76L 4.718.64M7.0713.00N10.6019.40O15.9029.20P23.9043.80Q35.8065.60Electrical/OpticalFor more information on electrical/optical characteristics, please see Application Note 1005.Contrast Enhancement For information on contrast enhancement, please see Application Note 1015.Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chorinated hydrocarbon family (methylene chloride, trichloro-ethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts.For information on soldering LEDs, please refer to Application Note 1027.Note:All categories are established for classification of products. Productsmay not be available in all categories. Please contact your localAgilent representatives for further clarification/information.Color Categories/semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(916) 788 6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6271 2451India, Australia, New Zealand: (+65) 6271 2394Japan: (+81 3) 3335-8152(Domestic/International), or0120-61-1280(Domestic Only)Korea: (+65) 6271 2194Malaysia, Singapore: (+65) 6271 2054Taiwan: (+65) 6271 2654Data subject to change.Copyright © 2005 Agilent Technologies, Inc.Obsoletes 5988-8412ENJanuary 19, 20055989-0080EN。
HDSP-B76Z中文资料
Agilent HDSP-B7xZ Series31.99 mm (1.26 inch) General Purpose 4 x 8 Dot Matrix Bi-Color Alphanumeric DisplaysData SheetDescriptionThese displays have a 31.99 mm (1.26 inch) character height. The devices are available in either common row anode or common row cathode configurations. The displays come in only black face paint. The Bi-color display consists of GaP Red (HER) and GaP Green colors.Features• 4 x 8 Dot matrix font•X-Y stackable•Pin-out–27.42 mm (1.08 in.) Dual-In-Line(DIP) leads on 2.0 mm (0.079 in.)centers•Choice of colors–Bi-color: red and green•Face paint color: black• Design flexibility–Common row anode or commonrow cathode•Categorized for luminanceApplications•Suitable for indoor use•Not recommended for industrialapplications, i.e. operatingtemperature requirementsexceeding 85°C or below -35°C•Extreme temperature cycling notrecommended[1]These parts are subjected to Out-going Quality Assurance (OQA)inspection with an AQL of0.065% for functional and visual/cosmetic defects.DevicesHDSP-DescriptionB71Z31.99 mm Black Surface Bi-Color Common Row AnodeB76Z31.99 mm Black Surface Bi-Color Common Row Cathode Note:1. For details, please contact your local Agilent components sales office or an authorized distributor.P ackage Dimensions(0.079 x 7 = 0.553)Common Row Anode – Bi-Color451234567COLUMN ROW231PIN CONNECTION1CATHODE COLUMN 1 HER 2CATHODE COLUMN 1 GREEN 3CATHODE COLUMN 2 HER 4CATHODE COLUMN 2 GREEN 5CATHODE COLUMN 3 HER 6CATHODE COLUMN 3 GREEN 7CATHODE COLUMN 4 HER 8CATHODE COLUMN 4 GREEN 9ANODE ROW 110ANODE ROW 211ANODE ROW 312ANODE ROW 413ANODE ROW 514ANODE ROW 615ANODE ROW 716ANODE ROW 8Common Row Cathode – Bi-Color3412345678COLUMN ROW12THE SIGN REPRESENTS HER COLOR CHIPS THE SIGNREPRESENTS GREEN COLOR CHIPSPIN CONNECTION1ANODE COLUMN 1 HER 2ANODE COLUMN 1 GREEN 3ANODE COLUMN 2 HER 4ANODE COLUMN 2 GREEN 5ANODE COLUMN 3 HER 6ANODE COLUMN 3 GREEN 7ANODE COLUMN 4 HER 8ANODE COLUMN 4 GREEN 9CATHODE ROW 110CATHODE ROW 211CATHODE ROW 312CATHODE ROW 413CATHODE ROW 514CATHODE ROW 615CATHODE ROW 716CATHODE ROW 8Absolute Maximum Ratings at T A = 25˚CGaP Red GaP GreenParameter HDSP-B71Z/B76Z HDSP-B71Z/B76Z Units Average Power per Dot[1]3636mW Peak Forward Current per Dot[1](1/8 Duty Cycle at 10 KHz)100100mA Average Forward Current per Dot13[1,2]13[1,2]mA Reverse Voltage per Dot33V Operating Temperature–35 to +85–35 to +85°C Storage Temperature–35 to +85–35 to +85°C Wave Soldering Temperature for 3 seconds[3](2 mm [0.078 in.] below Body)250250°C Notes:1.Do not exceed maximum average current per dot.2.Derate above 25°C at 0.17 mA/°C.3.Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes.Total soldering time not to exceed 3 seconds.GaP GreenOptical/Electrical Characteristics at T A = 25˚C GaP RedBi-ColorDevices HDSP-ParameterSymbolMin.Typ.Max.Units Test Conditions Luminance/Dot I v124.1185372Cd/m 2I FP = 40 mA,(Digit Average)[1]1/8 Duty FactorB71Z B76Z Notes:1.The digits are categorized for luminance. The luminance category is designated by a letter on the side of the package.2.The dominant wavelength, λd , is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.3.Typical specification for reference only. Do not exceed absolute maximum ratings.Bi-Color (Cd/m2 at I FP = 40 mA, 1/8 Duty Cycle)Bin Name Min.[2]Max.[2]H124.1149I149.1179J179.1215K215.1258L258.1310M310.1372Hue GradeBinCoordinate67891011X0.562-0.5730.572-0.5830.582-0.5930.592-0.6030.602-0.6130.612-0.623 Y0.425-0.4360.415-0.4260.405-0.4160.395-0.4060.385-0.3960.375-0.386 Notes:1.Hue categories are established for classification of products. Products may not be available in all bin categories.2.Tolerance for each intensity bin limit is ± 10%.Contrast EnhancementFor information on contrast enhancement, please see Application Note 1015.Soldering/CleaningCleaning agents from the ketonefamily (acetone, methyl ethylketone, etc.) and from thechlorinated hydrocarbon family (methylene chloride, trichloroeth-ylene, carbon tetrachloride, etc.)are not recommended for cleaningLED parts. All of these various solvents attack or dissolve theencapsulating epoxies used to form the package of plastic LEDparts.For information on soldering LEDs, please refer to Application Note 1027.Figure 4. Relative luminance vs. peak forward current.Figure 3. Relative efficiency (luminousintensity per unit dot) vs. peak current per dot.Figure 1. Maximum allowable average current per dot vs. ambient temperature.Figure 2. Forward current vs. forward voltage.I D C – M A X I M U M D C C U R R E N T P E R D O T – m AT A – AMBIENT TEMPERATURE – °C1563912I F – F O R W A R D C U R R E N T P E R D O T – m AV F – FORWARD VOLTAGE – V R E L A T I V E L U M I N A N C E (N O R M A L I Z E D T O 1 A T 40 m A P E A K )00I PEAK – PEAK FORWARD CURRENT – mA 902070801002.52.01.00.560504030101.5R E L A T I V E E F F I C IE N C YI PEAK – PEAK DOT CURRENT – mADevice ReliabilityFor reliability information, please see the reliability data sheet 31.99 mm General Purpose 4 x 8 Dot Matrix Alphanumeric Displays ./semiconductors For product information and a complete list of distributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or (916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939Japan: (+81 3) 3335-8152 (Domestic/Interna-tional), or 0120-61-1280 (Domestic Only)Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand,Philippines, Indonesia: (+65) 6755 2044Taiwan: (+65) 6755 1843Data subject to change.Copyright © 2004 Agilent Technologies, Inc.Obsoletes 5988-1745EN July 8, 20045988-5216EN。
XOSM-572中文资料
Document Number: 35062For technical questions contact: frequency@Surface Mount OscillatorXOSM-572Vishay DaleFEATURES•Miniature Package•Tri-state enable/disable •HCMOS compatible •Tape and Reel •IR Re-flow•2.5 V input voltage•100 % Lead (Pb)-free and RoHS compliantThe XOSM-572 series is an ultra miniature package clock oscillator with dimensions 7.0 x 5.0 x 1.5 mm. I t is mainly used in portable PC and telecommunication devices and equipment.* Include: 25 ºC tolerance, operating temperature range, input voltage change, aging, load change, shock and vibration.STANDARD ELECTRICAL SPECIFICATIONSPARAMETER SYMBOLCONDITIONXOSM-572Frequency Range F O1 MHz ~ 100.000 MHzFrequency Stability*All Condition*± 25 ppm, ± 50 ppm, ± 100 ppmOperating T emperatureT OPR 0 ºC ~ 70 ºC (- 40 ºC ~ + 85 ºC option)Storage Temperature Range T STG - 55 ºC ~ + 125 ºC Power Supply Voltage V DD 2.5 V ± 10 %Aging (First Y ear)25 ºC ± 3 ºC ± 5 ppmSupply Current I DD1.000 MHz to 23.999 MHz 12 mA Max 24.000 MHz to 49.999 MHz 15 mA Max50.000 MHz to 69.999 MHz 20 mA Max 70.000 MHz to 100.000 MHz 30 mA MaxOutput Symmetry Sym At 1/2 V DD 40/60 % (45/55 % Option)Rise Time T r 10 % V DD ~ 90 % V DD 7 ns Max Fall Time T f 90 % V DD ~ 10 % V DD 7 ns MaxOutput VoltageV OH 90 % V DD MinV OL 10 % V DD MaxOutput Load HCMOS Load 30 pF Max Start-up Time Ts 10 ms Max Pin 1, tri-state function Pin 1 = H or open.... output active at pin 3Pin 1 = L..... high impedance at pin 3ORDERING INFORMATIONXOSM-572MODELBFREQUENCY ST ABILITY AA = 0.0025 % (25 ppm)A = 0.005 % (50 ppm)B = 0.01 % (100 ppm)R OTR Blank = Standard R = - 40 °C to + 85 °CE ENABLE/DISABLE E = Disable to Tristate 50 MFREQUENCY/MHze4JEDECLEAD (Pb)-FREE STANDARDGLOBAL PART NUMBERMODELFREQUENCY ST ABILITYOTRENABLE/DISABLEPACKAG E CODEOPTIONSFREQUENCYXO 27C T E C N A 50M For technical questions contact: frequency@Document Number: 35062XOSM-572Vishay DaleSurface Mount OscillatorGLOBAL PART NUMBERINGXO52CTELNA4MMODEL NUMBER FREQUENCY STABILITY OPERATING TEMPERATURE(OTR)ENABLE/DISABLE PACKAGE CODE OPTIONS FREQUENCY XO53 = XO-53XO54 = XO-54XO34 = XO-543XO52 = XO-52XO32 = XO-523XO56 = XO-56XOVC = XOVC-23XO5M = XOSM-52XO63 = XOSM-533XO62 = XOSM-532XO61 = XOSM-531XO57 = XOSM-57XO37 = XOSM-573XO27 = XOSM-572XO17 = XOSM-571XO55 = XOSM-55XO35 = XOSM-553C = 0.01 % (100 ppm)D = 0.005 %(50 ppm)E = 0.0025 %(25 ppm)T = 0 °C to + 70 °C R = - 40 °C to + 85 °CF = Pin 1 Open E = Disable toT ristateT APE AND REEL H = RF7BULK A = B04(XO63, XO62,XO61)C = D06(XO57, XO37, XO27, XO17)D = D07(XO53, XO54, XO34, XO56, XOVC, XO55,XO35)L = D08(XO52, XO32,XO5M)NA = No Additional Options 60 = 45/55SymmetryContact factory for all other options4M = 4 MHz 40M = 40 MHz 100M = 100 MHz 12M288 = 12.288 MHzM is used as decimal place holder in frequencyExample: XO52CTELNA40MDisclaimer Legal Disclaimer NoticeVishayAll product specifications and data are subject to change without notice.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.元器件交易网。
07453;中文规格书,Datasheet资料
Owned
DRAWING NUMBER 07453
DATE: 8/01
/
DRAWING PROTECTOR, STATIC SAFE, 6 MIL
分销商库存信息:
DESCO 07453
A. B size drawing holder will hold up to an 11" x 17" sheet size. Wording across bottom area: "DESCO STATIC SAFE B SIZE DRAWING PROTECTOR ITEM #07453"
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: PHONE (909) 627-8178 FAX (909) 627-7449 FAX REQUEST (909) 627-7126 DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407 PHONE (781) 821-8370 FAX (781) 575-0172
Description: This product is designed for use in ESD controlled areas where there are ESDsensitive devices. This product is constructed out of 6 mil, clear, permanently dissipative polyethylene film. Drawing protectors are designed to provide static control packaging for holding engineering drawings or other large documents. This product meets or exceeds the requirements of MIL-B-81705C, Type II. Amine-free. N-Octanoic acid free. Humidity independent. Does not promote corrosion. Has no measurable outgassing. Electrical Properties: Static Decay: < 1.0 sec. Surface Resistivity: 1010 - 1012 Ohms/sq. Specifications: Polycarbonate haze: Corrosivity: Melt Index: Density: Haze: 60° gloss: 45° gloss: Dart impact: Coefficient of friction: 1% secant modulus: Stiffness: Negligible Neglibible .050 gm/10 min. 0.923 gm/cc 10% 90 56 230 gms 0.50 MD 24,000 psi MD 25,000 psi per FTMS 101C, Method 4046 per ASTM D-257 72 hr contact per FTMS 101C, Method 3005 per ASTM D-1238 per ASTM D-1505 per ASTM D-1003 per ASTM D-2457 per ASTM D-2457 per ASTM D-1709 per ASTM D-1894 per ASTM D-882 per ASTM D-882
KARCHER HDS 501C 550C 说明书
目录保护环境``````````````````````````````````````````````````````````````````````````````````````````2 图例说明`````````````````````````````````````````````````````````````````````````` `````````````````3使用前准备操作`````````````````````````````````````````````````````````````````````````````````3注入燃油````````````````````````````````````````````````````````````````````````` ``````````````````3注入清洁剂`````````````````````````````````````````````````````````````````````````````````````````3安装手喷枪`````````````````````````````````````````````````````````````````````````````````````````4安装水连接器``````````````````````````````````````````````````````````````````````````````````````4以开放式水箱供水`````````````````````````````````````````````````````````````````````````````````4电源连接```````````````````````````````````````````````````````````````````````````````````````````4使用操作``````````````````````````````````````````````````````````````````````````````````````````4 启动设备```````````````````````````````````````````````````````````````````````````````````````````4设定清洁温度``````````````````````````````````````````````````````````````````````````````````````4安装清洁剂抽吸装置``````````````````````````````````````````````````````````````````````````````4产品使用范围````````````````````````````````````````````````````````````````````````````````````5 使用冷水进行清洁操作````````````````````````````````````````````````````````````````````````````5使用热水进行清洁操作````````````````````````````````````````````````````````````````````````````6每次使用后保养工作`````````````````````````````````````````````````````````````````````````` 6 停止设备运转````````````````````````````````````````````````````````````````````````````````````6保养与维护```````````````````````````````````````````````````````````````````````````````````````7 维护间隔```````````````````````````````````````````````````````````````````````````````````````````7保养工作``````````````````````````````````````````````````````````````````````````````````````````8 清洁进水过滤器````````````````````````````````````````````````````````````````````````````````````8清洁低水位保护装置上的过滤器`````````````````````````````````````````````````````````````````8清洁清洁剂抽吸装置上的过滤器`````````````````````````````````````````````````````````````````8故障排除``````````````````````````````````````````````````````````````````````````````````````````8 保修```````````````````````````````````````````````````````````````````````````````````` ``````````10 通用信息````````````````````````````````````````````````````````````````````````````` ```````````10 技术参数表``````````````````````````````````````````````````````````````````````````````````````11在第一次使用设备之前，请详细阅读产品使用说明，尤其是里面的安全指南。
HDSP-207资料
10 mm (0.40 inch) Seven Segment DisplaysTechnical DataFeatures• Industry Standard Size• Industry Standard Pinout 7.6 mm (0.3 inch) DIP Single 15.24 mm (0.6 inch) DIP Dual Leads on 2.54 mm(0.1 inch) Centers• Choice of ColorsRed, AlGaAs Red, High Efficiency Red, Orange, Yellow, Green• Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Gray Package Gives Optimum Contrast±50° Viewing Angle • Design FlexibilityCommon Anode orCommon CathodeSingle and Dual DigitsRight Hand Decimal Point±1. Overflow Character• Categorized for LuminousIntensityYellow and Green Categorizedfor ColorUse of Like Categories Yields aUniform Display• High Light Output• High Peak Current• Excellent for Long DigitString MultiplexingHDSP-F00x SeriesHDSP-F15x SeriesHDSP-F20x SeriesHDSP-F30x SeriesHDSP-F40x SeriesHDSP-F50x SeriesHDSP-G00x SeriesHDSP-G15x SeriesHDSP-G20x SeriesHDSP-G30x SeriesHDSP-G40x SeriesHDSP-G50x Series• Intensity and ColorSelection Option• Sunlight Viewable AlGaAsAlGaAs Red Red[1]HER Orange Yellow Green PackageHDSP-HDSP-HDSP-HDSP-HDSP-HDSP-Description DrawingF001F151F201F401F301F501Common Anode Right Hand Decimal AF003F153F203F403F303F503Common Cathode Right Hand Decimal BF007F157F207F407F307F507Common Anode ±1. Overflow CF008F158F208F408F308F508Common Cathode ±1. Overflow DG001G151G201G401G301G501Two Digit Common AnodeRight Hand Decimal E G003G153G203G403G303G503Two Digit Common CathodeRight Hand Decimal F DevicesNote:1. These displays are recommended for high ambient light operation. Please refer to the HDSP-F10X data sheet for low currentoperation.元器件交易网DescriptionThe 10 mm (0.40 inch) LED seven segment displays are Agilent’s most space-efficient character size. They are designed for viewing distances up to 4.5metres (15 feet). These devicesuse an industry standard sizepackage and pinout. The dualnumeric, single numeric, and ±1.overflow devices feature a righthand decimal point. All devicesare available as either commonanode or common cathode.Typical applications includeinstruments, point of saleterminals, and appliances.Package DimensionsInternal Circuit DiagramHOLE PATTERN FOR PCB LAYOUT TO ACHIEVE UNIFORM 0.450 IN. DIGIT TO DIGIT PITCH. FOR HDSP-FXXX TO HDSP-GXXX.Electrical/Optical Characteristics at T A = 25°C Absolute Maximum RatingsRed AlGaAs Red HER/Orange Yellow Green HDSP-HDSP-HDSP-HDSP-HDSP-F00X/G00X F15X/G15X F20X/G20X/F30X/G30X F50X/G50X DescriptionSeriesSeriesG40X SeriesSeriesSeriesUnits Average Power per Segment or DP 829610580105mW Peak Forward Current per 150[1]160[3]90[7]60[7]90[9]mA Segment or DPDC Forward Current per 25[2]40[4]30[6]20[8]30[10]mA Segment or DPOperating Temperature Range -40 to +100-20 to +100[11]-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per 3.0VSegment or DPLead Solder Temperature for 3Seconds (1.59 mm [0.63 in.]260°Cbelow seating plane)Notes:1. See Figure 1 to establish pulsed conditions.2. Derate above 80°C at 0.63 mA/°C.3. See Figure 2 to establish pulsed conditions.4. Derate above 46°C at 0.54 mA/°C.5. See Figure 7 to establish pulsed conditions.6. Derate above 53°C at 0.45 mA/°C.7. See Figure 8 to establish pulsed conditions.8. Derate above 81°C at 0.52 mA/°C.9. See Figure 9 to establish pulsed conditions.10. Derate above 39°C at 0.37 mA/°C.11. For operation below -20°C, contact your local Agilentcomponents sales office or an authorized distributor.Device SeriesParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment [1,2]I V 6501200µcdI F = 20 mA (Digit Average)Forward Voltage/Segment or DPV F 1.6 2.0V I F = 20 mAHDSP-Peak Wavelength λPEAK 655nm F00X/G00XDominant Wavelength [3]λd 640nm Reverse Voltage/Segment or DP [4]V R 3.012V I F = 100 µATemperature Coefficient of ∆V F /°C -2mV/°CV F /Segment or DP Thermal Resistance LED R θJ-PIN320°C/W/SegJunction-to-PinRedAlGaAs RedDeviceSeries Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,5]I V7.515.0mcd I F = 20 mA(Digit Average)Forward Voltage/Segment or DP V F 1.8 2.2V I F = 20 mA HDSP-Peak WavelengthλPEAK645nmF15X/G15X Dominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN320°C/W/SegJunction-to-PinHigh Efficiency RedDeviceSeries Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2]I V4201200µcd I F = 5 mA(Digit Average)Forward Voltage/Segment or DP V F 2.0 2.5V I F = 20 mA HDSP-Peak WavelengthλPEAK635nmF20X/G20X Dominant Wavelength[3]λd626nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN320°C/W/SegJunction-to-PinOrangeYellowDevice SeriesParameterSymbolMin.Typ.Max.Units Test Conditions Luminous Intensity/Segment [1,2]290800µcdI F = 5 mA(Digit Average)I V Forward Voltage/Segment or DPV F 2.2 2.5V I F = 20 mAHDSP-Peak Wavelength λPEAK 583nm F30X /G30XDominant Wavelength [3,6]λd 581.5586592.5nm Reverse Voltage/Segment or DP [4]V R 3.040V I R = 100 µA Temperature Coefficient of ∆V F /°C -2mV/°CV F /Segment or DP Thermal Resistance LED R θJ-PIN320°C/W/SegJunction-to-PinDevice SeriesParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment [1,2]I V 4201200µcdI F = 5 mA(Digit Average)Forward Voltage/Segment or DPV F 2.0 2.5V I F = 20 mAPeak Wavelength l PEAK 600nm Dominant Wavelength [3]l d 603nm Reverse Voltage/Segment or DP [4]V R 3.030V I R = 100 µATemperature Coefficient of ∆V F /°C -2mV/°CV F /Segment or DP Thermal Resistance LED Rl\q J-PIN320°C/W/SegJunction-to-PinHDSP-F40X/G40XHigh Performance GreenDevice Test Series Parameter Symbol Min.Typ.Max.Units Conditions Luminous Intensity/Segment[1,2]I V10303500µcd I F = 10 mA(Digit Average)Forward Voltage/Segment or DP V F 2.1 2.5V I F = 10 mA HDSP-Peak WavelengthλPEAK566nmF50X/G50X Dominant Wavelength[3,6]λd571577nmReverse Voltage/Segment or DP[4]V R 3.050V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN320°C/W/SegJunction-to-PinNotes:1. Case temperature of device immediately prior to the intensity measurement is 25°C.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color ofthe device.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. For low current operation, the AlGaAs HDSP-F10X, G10X series displays are recommended. They are tested at 1 mAdc/segment and are pin for pin compatible with the HDSP-F15X/G15X series.6. The Yellow (HDSP-F30X/G30X) series and Green (HDSP-F50X/G50X) series displays are categorized for dominant wavelength. Thecategory is designated by a number adjacent to the luminous intensity category letter.Figure 1. Maximum Tolerable Peak Current vs. Pulse Duration – Red.Figure 5. Relative Luminous Intensity vs. DC Forward Current.Figure 6. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.RED, AlGaAs RedHER, Orange, Yellow, GreenFigure 7. Maximum Tolerable Peak Current vs.Pulse Duration – HER, Orange.Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration – Yellow.元器件交易网元器件交易网Data subject to change.Copyright © 1999 Agilent Technologies, Inc.Obsoletes 5952-3428 (11/90)5963-7393E (11/99)。
MHW6272资料
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MHW6272/D
The RF Line 77-Channel (550 MHz) CATV Line Extender Amplifier
• Specified for 60– and 77–Channel Performance • Broadband Power Gain @ f = 40 – 550 MHz Gp = 27 dB (Typ) • Broadband Noise Figure NF = 6 dB (Typ) @ 550 MHz • Superior Gain, Return Loss and DC Current Stability with Temperature • All Gold Metallization • 7 GHz fT Ion–Implanted Transistors
MHW6272
27 dB GAIN 550 MHz 77–CHANNEL CATV AMPLIFIER
MAXIMUM RATINGS
Rating RF Voltage Input (Single Tone) DC Supply Voltage Operating Case Temperature Range Storage Temperature Range Symbol Vin VCC TC Tstg Value +55 +28 –20 to +100 –40 to +100 Unit dBmV Vdc °C °C CASE 714–06, STYLE 1
ELECTRICAL CHARACTERISTICS (VCC = 24 Vdc, TC = +30°C, 75 Ω system unless otherwise noted)
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Hexadecimal and Numeric Displays for Industrial ApplicationsTechnical DataFeatures• Three ColorsHigh-Efficiency RedYellowHigh Performance Green• Two High-Efficiency Red OptionsLow PowerHigh Brightness• Three Character OptionsNumericHexadecimalOver Range• Performance Guaranteed over Temperature • Memory Latch/Decoder/ DriverTTL Compatible• 4 x 7 Dot Matrix Character • Categorized for Luminous Intensity• Yellow and Green Categorized for Color Typical Applications• Industrial Equipment• Computer Peripherals• Instrumentation• Telecommunication EquipmentDevice Selection GuidePart Number Front HDSP-Color Description View 0760High-Efficiency Numeric, Right Hand DP A0761Red Numeric, Left Hand DP B0762Low Power Hexadecimal C0763Over Range ±1D0770High-EfficiencyNumeric, Right Hand DP A 0771Red Numeric, Left Hand DP B 0772High Brightness Hexadecimal C 0763Over Range ±1D 0860Yellow Numeric, Right Hand DP A 0861Numeric, Left Hand DP B 0862Hexadecimal C 0863Over Range ±1D 0960Green Numeric, Right Hand DP A 0961Numeric, Left Hand DP B 0962Hexadecimal C 0963Over Range ±1D DescriptionThese solid state display devices are designed and tested for use in adverse industrial environments. The character height is 7.4mm (0.29 inch). The numeric and hexadecimal devices incorporate an on-board IC that contains the data memory, decoder and display driver functions.The numeric devices decode positive BCD logic into characters “0-9”, a “–” sign, decimal point, and a test pattern. The hexadeci-mal devices decode positive BCD logic into 16 characters, “0-9, A-F.”An input is provided on the hexa-decimal devices to blank the display (all LEDs off) without losing the contents of the memory. The over range device displays “±1” and right hand decimal point and is typically driven via external switching transistors.HDSP-076X SeriesHDSP-077X SeriesHDSP-086X SeriesHDSP-096X SeriesPackage DimensionsFigure 2. Logic Block Diagram.Figure 1. Timing DiagramZAbsolute Maximum RatingsDescription Symbol Min.Max.Unit Storage Temperature, Ambient T S-65+100°C Operating Temperature, Ambient[1]T A-55+85°C Supply Voltage[2]V CC-0.5+7.0V Voltage Applied to Input Logic, dp and Enable Pins V I, V DP, V E-0.5V CC V Voltage Applied to Blanking Input[2]V B-0.5V CC V Maximum Solder Temperature at 1.59 mm (0.062 inch)260°C Below Seating Plane, t ≤ 5 secondsRecommended Operating ConditionsDescription Symbol Min.Nom.Max.Unit Supply Voltage[2]V CC 4.5 5.0 5.5V Operating Temperature, Ambient[1]T A-55+85°C Enable Pulse Width t W100nsec Time Data Must Be Held Before Positive t SETUP50nsec Transition of Enable LineTime Data Must Be Held After Positive t HOLD50nsec Transition of Enable LineEnable Pulse Rise Time t TLH 1.0msec Optical Characteristics at T A = 25°C, V CC = 5.0 VNotes:1. The nominal thermal resistance of a display mounted in a socket that is soldered onto a printed circuit board is RθJA = 50°C/W/device. The device package thermal resistance is RθJ-PIN = 15°C/W/device. The thermal resistance device pin-to-ambient through the PC board should not exceed 35°C/W/device for operation at T A = +85°C.2. Voltage values are with respect to device ground, pin 6.3. These displays are categorized for luminous intensity with the intensity category designated by a letter code located on the back ofthe display package. Case temperature of the device immediately prior to the light measurement is equal to 25°C.Electrical Characteristics; T A = -55°C to +85°CNotes:4. The luminous intensity at a specific operating ambient temperature, I V (T A ) may be approximated from the following exponential equation: I (T = I (25°C) e [k (T - 25°C)].d device.6. The HDSP-0860 and HDSP-0960 series devices are categorized as to dominant wavelength with the category designated by a number on the back of the display package.7. All typical values at V CC = 5.0 V and T A = 25°C.AOperational ConsiderationsElectricalThese devices use a modified4x7 dot matrix light emitting diode to display decimal/hexa-decimal numeric information. The high efficiency red and yellow LEDs are GaAsP epitaxial layer on a GaP transparent substrate. The green LEDs are GaP epitaxial layer on a GaP transparent substrate. The LEDs are driven by constant current drivers, BCD information is accepted by the display memory when the enable line is at logic low and the data is latched when the enable is at logic high. Using the enable pulse width and data setup and hold times listed in the Recommended Operating Conditions allows data to be clocked into an array of displays at a 6.7 MHz rate.The decimal point input is activelow true and this data is latchedinto the display memory in thesame fashion as the BCD data.The decimal point LED is drivenby the on-board IC.The blanking control input on thehexadecimal displays blanks (turnsoff) the displayed informationwithout disturbing the contents ofdisplay memory. The display isblanked at a minimum thresholdlevel of 2.0 volts. When blanked,the display standby power isnominally 250 mW at T A = 25°C.MechanicalThe primary thermal path forpower dissipation is through thedevice leads. Therefore, to insurereliable operation up to anambient temperature of +85°C, itis important to maintain a case-to-ambient thermal resistance ofless than 35°C watt/device asmeasured on top of display pin 3.For information on soldering andpost solder cleaning see Applica-tion Note 1027, Soldering LEDComponents.Contrast EnhancementThese display devices aredesigned to provide an optimumON/OFF contrast when placedbehind an appropriate contrastenhancement filter. For furtherinformation, please refer toApplication Note 1015, ContrastEnhancement Techniques forLED Displays.Over Range DisplayThe over range devices display“±1” and decimal point. Thecharacter height and packageconfiguration are the same as thenumeric and hexadecimaldevices. Character selection isobtained via external switchingtransistors and current limitingresistors.NOTE: 1. DIMENSIONS IN MILLIMETRES AND (INCHES).Package DimensionsNotes:0: Line switching transistor in Figure 7 cutoff.1: Line switching transistor in Figure 7 saturated.X: 'don't care'Absolute Maximum RatingsDescriptionSymbol Min.Max.Unit Storage Temperature, Ambient T S-65+100°C Operating Temperature, Ambient T A -55+85°C Forward Current, Each LED I F 10mA Reverse Voltage, Each LEDV R5VRecommended Operating Conditions V = 5.0 VLuminous Intensity per LED[3,4]Figure 3. Typical Driving Circuit.Electrical Characteristics: T = -55°C to +85°CData subject to change.Copyright © 1999 Agilent Technologies, Inc. Obsoletes 5953-9395 (1/84)5963-7395E (11/99)。