82DA682M025HB2D中文资料
V8A02解决方案用户手册V2.1
V8A02解决方案用户手册V2.1目录1. 文档说明 (6)1.1版本说明 (6)1.2专有名词 (6)2. 方案简介 (8)2.1方案概述 (8)2.2 功能特点 (8)2.2.1 支持DVI数据源输入 (8)2.2.2 支持宽屏等多种DVI输入分辨率 (8)2.2.3 发送卡超大带载 (8)2.2.4 功能强大的配套软件 (8)2.2.5 智能在线检测 (8)2.2.6 高刷新频率 (8)2.2.7 高灰度等级 (9)2.2.8 支持各种像素类型 (9)2.2.9 灵活支持各种模组 (9)2.2.10 多样的端口设置功能 (9)2.2.11箱体色度调整 (9)2.2.12 逐点校正功能 (9)2.2.13 集成测试功能 (9)2.2.14 联机配置数据 (9)2.2.15 智能维修 (10)2.2.16 环路备份功能 (10)2.2.17 在线升级固件安全可靠 (10)2.2.18 支持低电压输入 (10)2.2.19 配备指示灯及控制面板接口 (10)2.2.20 支持远距离传输 (10)2.2.21 支持音频传输及电源控制 (10)2.2.22 提供完整的二次开发接口 (10)2.2.24 支持内建PWM恒流 (10)2.2.25 支持低亮度高保真 (10)2.3产品清单 (11)3. 应用概述 (12)3.1 典型应用 (12)3.2 环路备份 (13)3.3 多发送卡 (14)4. 功能详解 (15)4.1 模组支持能力 (15)4.1.1 模组行、列数1～128以内任意 (16)4.1.2 模组数据类型 (16)4.1.3 模组内每扫描串移长度 (17)4.1.4 虚拟模组LED灯点位置多种排列方式 (17)4.2 箱体连接设置 (17)4.2.1 箱体内模组级联方式 (17)4.2.2 端口扩展 (18)4.2.3 端口对开 (19)4.2.4 端口逆序 (20)4.2.5 端口偏移 (20)4.2.6 箱体带载高度、宽度 (20)4.2.7 箱体显示起始的行、列位置 (21)4.2.8 箱体无信号输入时显示内容设置 (21)4.2.9 箱体级联数量 (21)4.2.10 箱体色度调整 (21)4.2.11 箱体逐点色度校正 (22)4.2.12 箱体测试功能 (22)4.3 屏体参数调节 (23)4.3.1 多个LED屏设置 (23)4.3.3 虚拟LED屏的实效果 (24)4.3.4 LED屏亮度调节 (25)4.3.5 LED屏对比度调节 (26)4.3.6 LED屏色温调节 (26)4.3.7 关闭LED屏显示 (27)4.3.8 锁定LED屏内容 (27)4.3.9 LED屏环境监控 (27)4.4 显示性能参数说明 (30)4.4.1 灰度等级 (30)4.4.2 刷新频率 (31)4.4.3 亮度效率 (31)4.4.4 最小OE (31)4.5 发送卡带载 (31)4.6 在线检测 (34)4.7 系统升级 (34)4.8 智能维修 (36)4.8.1 接收卡更换 (36)4.8.2模组替换 (37)5. 使用说明 (39)5.1 连接硬件 (39)5.1.1 发送卡安装方法 (39)5.1.2 接收卡安装方法 (39)5.1.3 多功能卡安装方法 (39)5.2 安装软件 (40)5.2.1 配置要求 (40)5.2.2 安装步骤 (40)5.3 系统设置 (40)5.3.1 显卡设置 (40)5.3.2系统设置 (43)6. 附录 (55)6.1 设备推荐型号 (55)6.1.1 DVI复制器 (55)6.2 选用线缆清单 (55)6.2.1 HDMI转DVI线缆 (55)6.2.2 音频线 (56)6.2.3 双绞线 (56)6.2.4 光纤 (56)1. 文档说明1.1版本说明版本日期说明V2.0 2013-01-09 升级自1.71版本V2.1 2013-07-15 新增接收卡产品1.2专有名词以下是本文中使用的专用术语及解释，便于读者更好的理解文章内容｡●软件一系列按照特定顺序组织的计算机数据和指令的集合，本文中特指在计算机上运行的应用软件。
82D中文资料
82DVishay SpragueAluminum Capacitors+ 85 °C, Snap-In, General Purpose For technical questions, contact: aluminumcaps4@Document Number: 42062FEATURES•Economical•General purpose design •Wide voltage rangeFig.1 Component OutlinesQUICK REFERENCE DATADESCRIPTION VALUENominal case size ØD x L in mm 0.87" x 1.00" (22.0 x 25.0) to 1.38" x 3.15" (35.0 x 80.0)Operating temperature - 40 °C to + 85 °C Rated capacitance range, C R 39 µF to 180 000 µFTolerance on C R ± 20 %Rated voltage range, U R6.3 WVDC to 450 WVDCTermination Snap inLife validation test at 85 °C2000 hours: Δ CAP ≤ 15 % from initial measurement. Δ ESR ≤ 1.5 x initial specified limit. Δ DCL ≤ initial specifiedlimit Shelf life at 85 °C 500 hours: Δ CAP ≤ 15 % from initial measurement. Δ ESR ≤ 1.3 x initial specified limit. Δ DCL ≤ 2 x initialspecified limitDC leakage currentI = K K = 4.0 at + 25 °C I in µA, C in µF, V in VoltsCVRIPPLE CURRENT MULTIPLIERSTEMPERATUREAMBIENT TEMPERATUREMULTIPLIERS+ 55 °C 2.0+ 65 °C 1.7+ 75 °C 1.4+ 85 °C1.0FREQUENCY (Hz)WVDC 50 TO 60300 TO 10001000 ANDUP 16 - 490.85 1.10 1.1550 - 1990.83 1.15 1.20200 - 4000.801.301.40ESL (TYPICAL VALUES AT 1 MHz TO 10 MHz)Nominal Diameter 0.87(22.0)0.98(25.0) 1.18(30.0) 1.38(35.0)Typical ESL (nH)6.08.010.012.0DIMENSIONS in inches (millimeters)CASE CODE DIAMETER LENGTH CASE CODE DIAMETER LENGTH D + 0.04 - 0 (+ 1.0 - 0)L ± 0.08 (2.0) D + 0.04 - 0 (+ 1.0 - 0)L ± 0.08 (2.0)HA 0.87 (22.0) 1.00 (25.0)KC 1.18 (30.0) 1.38 (35.0)HB 0.87 (22.0) 1.18 (30.0)KD 1.18 (30.0) 1.57 (40.0)HD 0.87 (22.0) 1.57 (40.0)KE 1.18 (30.0) 2.00 (50.0)JA 1.00 (25.0) 1.00 (25.0)MB 1.38 (35.0) 1.18 (30.0)JB 1.00 (25.0) 1.18 (30.0)MC 1.38 (35.0) 1.38 (35.0)JC 1.00 (25.0) 1.38 (35.0)MD 1.38 (35.0) 1.57 (40.0)JD 1.00 (25.0) 1.57 (40.0)ME 1.38 (35.0) 2.00 (50.0)JE 1.00 (25.0) 2.00 (50.0)MF 1.38 (35.0) 2.50 (63.0)KA 1.18 (30.0) 1.00 (25.0)MG1.38 (35.0)3.18 (80.0)KB 1.18 (30.0)1.18 (30.0)Document Number: 42062For technical questions, contact: aluminumcaps4@82DAluminum Capacitors+ 85 °C, Snap-In, General PurposeVishay SpragueNote(1) Style A and B not available in 0.87" (22.0mm) diameter unitsDIMENSIONS AND AVAILABLE FORMSDIMENSIONS in inches (millimeters)CIRCUIT BOARD MOUNT TERMINAL DIMENSIONS (1)DIAMETER STYLE ASTYLE BD CASE CODEB RC R 1.00 (25.0)J 0.093 (2.4)0.301 (7.6)140°N/A 1.18 (30.0)K 0.125 (3.2)0.363 (9.2)120°0.391 (9.9)1.38 (35.0)M0.125 (3.2)0.458 (11.6)120°0.458 (11.6)Style D82DVishay SpragueAluminum Capacitors+ 85 °C, Snap-In, General Purpose For technical questions, contact: aluminumcaps4@Document Number: 42062ORDERING EXAMPLEElectrolytic capacitor 82D series:82D 122 M 050 HA 2 D E3DESCRIPTIONCODE EXPLANATION 82D product type122capacitance value (1200 µF)M tolerance (M = ± 20 %)50voltage rating at 85 °C (50 V)HA can size (see dimensions table)2pvc insulating sleeveD terminal style (D = 2 pin snap-in)E3RoHS compliantELECTRICAL DATA AND ORDERING INFORMATIONCAPACITANCE(µF)PART NUMBERNOMINAL CASE SIZED x LMAX. ESR at 25 °C (m Ω)MAX. RIPPLE at + 85 °C (A)120 H Z 20 to 40 kH Z120 H Z 20 to 40 kH Z16 WVDC at + 85 °C, SURGE = 20 V10 000.082D103M016HB2D 0.866 x 1.181 (22.0 x 30.0)86.063.0 2.38 2.8015 000.082D153M016HD2D 0.866 x 1.575 (22.0 x 40.0)57.742.0 3.25 3.8315 000.0 (1)82D153M016JC2D 0.984 x 1.378 (25.0 x 35.0)58.043.0 3.33 3.8722 000.082D223M016KB2D 1.181 x 1.181 (30.0 x 30.0)53.741.0 3.70 4.2033 000.082D333M016KD2D 1.181 x 1.575 (30.0 x 40.0)35.327.0 5.00 5.7733 000.082D333M016MC2D 1.378 x 1.378 (35.0 x 35.0)28.021.0 5.96 6.8747 000.082D473M016MD2D1.378 x 1.575 (35.0 x 40.0)23.017.06.866.65Document Number: 42062For technical questions, contact: aluminumcaps4@82DAluminum Capacitors+ 85 °C, Snap-In, General PurposeVishay Sprague25 WVDC at + 85 °C, SURGE = 30 V3300.082D332M025HA2D 0.866 x 0.984 (22.0 x 25.0)110.076.0 1.98 2.394700.0 (1)82D472M025HB2D 0.866 x 1.181 (22.0 x 30.0)85.058.0 2.40 2.916800.082D682M025JB2D 0.984 x 1.181 (25.0 x 30.0)67.047.0 2.94 3.4910 000.082D103M025JD2D 0.984 x 1.545 (25.0 x 40.0)43.431.0 4.22 4.9615 000.082D153M025JE2D 0.984 x 1.969 (25.0 x 50.0)33.924.0 4.97 5.966800.082D682M025KA2D 1.181 x 0.984 (30.0 x 25.0)71.054.0 3.00 3.4710 000.082D103M025KB2D 1.181 x 1.181 (30.0 x 30.0)54.041.0 3.70 4.2015 000.082D153M025KD2D 1.181 x 1.575 (30.0 x 40.0)36.427.0 5.00 5.7722 000.082D223M025MD2D 1.378 x 1.575 (35.0 x 40.0)23.017.0 6.847.9635 WVDC at + 85 °C, SURGE = 40 V2200.082D222M035HA2D 0.866 x 0.984 (22.0 x 25.0)121.076.0 1.88 2.393300.082D332M035HB2D 0.866 x 1.181 (22.0 x 30.0)92.057.0 2.30 2.944700.082D472M035JB2D 0.984 x 1.181 (25.0 x 30.0)72.047.0 2.82 3.496800.082D682M035JD2D 0.984 x 1.575 (25.0 x 40.0)46.630.0 4.08 5.0810000.082D103M035JE2D 0.984 x 1.969 (25.0 x 50.0)36.324.0 4.87 5.964700.082D472M035KA2D 1.181 x 0.984 (30.0 x 25.0)75.054.0 2.92 3.4212 000.082D123M035KD2D 1.181 x 1.575 (30.0 x 40.0)37.727.0 4.89 5.7710 000.0 (1)82D103M035MB2D 1.378 x 1.181 (35.0 x 30.0)36.024.0 4.97 6.1015 000.082D153M035MD2D 1.378 x 1.575 (35.0 x 40.0)25.016.3 6.578.1350 WVDC at + 85 °C, SURGE = 63 V1200.082D122M050HA2D 0.866 x 0.984 (22.0 x 25.0)148.079.0 1.71 2.321800.082D182M050HB2D 0.866 x 1.181 (22.0 x 30.0)108.058.0 2.12 2.902200.082D222M050JB2D 0.984 x 1.181 (25.0 x 30.0)85.048.0 2.61 3.493900.082D392M050JD2D 0.984 x 1.575 (25.0 x 40.0)53.631.0 3.79 4.962700.082D272M050KA2D 1.181 x 0.984 (30.0 x 25.0)85.054.0 2.73 3.424700.0 (1)82D472M050MB2D 1.378 x 1.181 (35.0 x 30.0)43.024.0 4.56 6.106800.082D682M050MD2D 1.378 x 1.575 (35.0 x 40.0)28.016.0 6.218.2110 000.082D103M050ME2D 1.378 x 1.969 (35.0 x 50.0)22.013.07.609.8763 WVDC at + 85 °C, SURGE = 79 V1000.0 (1)82D102M063HA2D 0.866 x 0.984 (22.0 x 25.0)151.075.0 1.69 2.391500.082D152M063JA2D 0.984 x 0.984 (25.0 x 25.0)121.063.0 2.05 2.862200.082D222M063JC2D 0.984 x 1.378 (25.0 x 35.0)72.038.0 2.97 4.093300.082D332M063JD2D 0.984 x 1.575 (25.0 x 40.0)57.030.0 3.69 5.083300.082D332M063KB2D 1.181 x 1.181 (30.0 x 30.0)68.041.0 3.28 4.206800.082D682M063KE2D 1.181 x 1.969 (30.0 x 50.0)34.022.0 5.56 6.894700.082D472M063MC2D 1.378 x 1.378 (35.0 x 35.0)36.020.0 5.247.04100 WVDC at + 85 °C, SURGE = 125 V470.082D471M100HB2D 0.866 x 1.181 (22.0 x 30.0)258.0114.0 1.37 2.07680.082D681M100JB2D 0.984 x 1.181 (25.0 x 30.0)188.086.0 1.75 2.591000.082D102M100KB2D 1.181 x 1.181 (30.0 x 30.0)136.066.0 2.31 3.311500.082D152M100KC2D 1.181 x 1.378 (30.0 x 35.0)106.052.0 2.75 3.952200.082D222M100KE2D1.181 x 1.969 (30.0 x 50.0)66.033.04.025.69ELECTRICAL DATA AND ORDERING INFORMATIONCAPACITANCE(µF)PART NUMBERNOMINAL CASE SIZED x LMAX. ESR at 25 °C (m Ω)MAX. RIPPLE at + 85 °C (A)120 H Z 20 to 40 kH Z120 H Z 20 to 40 kH Z82DVishay SpragueAluminum Capacitors+ 85 °C, Snap-In, General Purpose For technical questions, contact: aluminumcaps4@Document Number: 42062Note•Additional Part Numbers in stock include 82D222M050HD2D, 82D472M050JE2D and 82D681M250MD2D. Many other capacitance ratings and voltages are available upon request. Please call for a quotation.200 WVDC at + 85 °C, SURGE = 250V150.082D151M200HA2D 0.866 x 0.984 (22.0 x 25.0)1012.0361.00.697 1.17220.082D221M200HB2D 0.866 x 1.181 (22.0 x 30.0)594.0255.00.967 1.48330.082D331M200HD2D 0.866 x 1.575 (22.0 x 40.0)381.0165.0 1.35 2.06220.082D221M200JA2D 0.984 x 0.984 (25.0 x 25.0)625.0272.00.967 1.46470.082D471M200JD2D 0.984 x 1.575 (25.0 x 40.0)271.0121.0 1.79 2.68330.082D331M200KA2D 1.181 x 0.984 (30.0 x 25.0)498.0192.0 1.21 1.96470.082D471M200KB2D 1.181 x 1.181 (30.0 x 30.0)294.0136.0 1.64 2.48680.082D681M200KD2D 1.181 x 1575 (30.0 x 40.0)221.087.0 2.14 3.411000.082D102M200KE2D 1.181 x 1.969 (30.0 x 50.0)142.067.0 2.89 4.22820.082D821M200MC2D 1.378 x 1.378 (35.0 x 35.0)189.093.0 2.46 3.511000.082D102M200MD2D 1.378 x 1.575 (35.0 x 40.0)149.074.0 2.88 3.41250 WVDC at + 85 °C, SURGE = 300V120.0 82D121M250HA2D 0.866 x 0.984 (22.0 x 25.0) 1077.0 385.0 68.00 1.17 180.0 82D181M250HB2D 0.866 x 1.181 (22.0 x 30.0) 722.0 261.0 88.00 1.52 220.0 82D221M250JB2D 0.984 x 1.181 (25.0 x 30.0) 513.0 189.0 1.13 1.94 330.0 82D331M250JD2D 0.984 x 1.575 (25.0 x 40.0) 382.0 121.0 1.51 2.79 470.0 82D471M250MB2D 1.378 x 1.181 (35.0 x 30.0) 281.0 117.0 1.92 3.07 680.0 82D681M250MD2D 1.378 x 1.575 (35.0 x 40.0) 209.0 74.0 2.43 4.26 1000.0 82D102M250ME2D 1.378 x 1.969 (35.0 x 50.0) 132.0 58.0 3.32 5.21 400 WVDC at + 85°C, SURGE = 450 V47.0 82D470M400HA2D 0.866 x 0.984 (22.0 x 25.0) 4310.0 2450.0 0.34 0.45 68.0 82D680M400JA2D 0.984 x 0.984 (25.0 x 25.0) 3020.0 1720.0 0.44 0.58 100.0 82D101M400JB2D 0.984 x 1.181 (25.0 x 30.0) 2060.0 1176.0 0.56 0.74 150.0 82D151M400KB2D 1.181 x 1.181 (30.0 x 30.0) 1430.0 820.0 0.76 1.00 220.0 82D221M400KD2D 1.181 x 1.575 (30.0 x 40.0) 820.0 470.0 1.10 1.46 330.0 82D331M400MD2D 1.378 x 1.575 (35.0 x 40.0) 630.0 360.0 1.39 1.85 450 WVDC at + 85°C, SURGE = 500 V39.0 82D390M450HA2D 0.866 x 0.984 (22.0 x 25.0) 4690.0 2460.0 0.32 0.45 56.0 82D560M450JA2D 0.984 x 0.984 (25.0 x 25.0) 3280.0 1730.0 0.42 0.58 100.0 82D101M450JC2D 0.984 x 1.378 (25.0 x 35.0) 1730.0 915.0 0.65 0.89 150.0 82D151M450KC2D 1.181 x 1.378 (30.0 x 35.0) 1150.0 610.0 0.89 1.22 220.0 82D221M450MC2D 1.378 x 1.378 (35.0 x 35.0) 870.0 460.0 1.14 1.56 330.082D331M450ME2D1.378 x 1.969 (35.0 x 50.0)510.0274.01.682.29ELECTRICAL DATA AND ORDERING INFORMATIONCAPACITANCE(µF)PART NUMBERNOMINAL CASE SIZED x LMAX. ESR at 25 °C (m Ω)MAX. RIPPLE at + 85 °C (A)120 H Z 20 to 40 kH Z120 H Z 20 to 40 kH ZDisclaimer Legal Disclaimer NoticeVishayAll product specifications and data are subject to change without notice.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.元器件交易网Document Number: 。
得力 DL82、DZ82系列扫描仪用户手册 说明书
请将装置尽量靠近计算机，让接口数据线能够轻松地连接装置与计算 机。
请勿将装置或其电源适配器放置在下列环境中： 室外 靠近灰尘、水或热源 易受电击、震动、温度极高或极低、湿度高及阳光直射的位置
使用本装置时请保持手部干燥。避免造成电击伤害。 除非装置文件中另有明确说明，否则切勿自行拆卸或试图改装电源适配
保证
本书内容若有更动，本公司将不另行通知。 本公司对本文档内容不做任何保证，包括(并不限于)对某项特殊目的的适 用性的隐含保证。 对因此造成的错误，或因装修、效能或本产品使用上造成的不固定或严重 损害，本公司不负任何责任。
CCC_EMI 警告 警告： 在居住环境中，运行此设备可能会造成无线电干扰。 *本产品属于第一级 LED 产品。
5. 保养及维修扫描仪.................................................. 5-1
5.1 清理扫描仪玻璃镜片 ....................................... 5-1 5.2 清洁自动进纸装置 .......................................... 5-2 5.3 执行清洁模式 ............................................... 5-5 5.4 清洁超声波感应器 .......................................... 5-6 5.5 擦拭玻璃镜片 ............................................... 5-7 5.6 耗材更换 ..................................................... 5-8
Panduit 电缆管理系统产品型号与尺寸说明书
B
DNF14-250FIB
DNF14-205FIB
DNF14-206FIB
DNF14-187FIB
DNF14-188FIB
DNF10-250FIB
.250 X .032 [6,3 X 0,8] .205/.187 X .032 [5,2/4,8 X 0,8] .205/.187 X .020 [5,2/4,8 X 0,5] .187 X .032 [4,8 X 0,8] .187 X .020 [4,8 X 0,5] .250 X .032 [6,3 X 0,8] .205/.187 X .032 [5,2/4,8 X 0,8] .205/.187 X .020 [5,2/4,8 X 0,5] .187 X .032 [4,8 X 0,8] .187 X .020 [4,8 X 0,5]
3. SEE FOR PACKAGE QUANTITIES
WIRE STOP
HOUSING
STAMPING
PA NDUIT
WIRE AND RECEPTACLE SIZES ARE
IDENTIFIED ON HOUSING
H
W
INDICATED BY PART NUMBER SUFFIX 4. DIMENSIONS IN BRACKETS ARE METRIC EQUIVALENT 5. COLORS ARE TRANSLUCENT. 6. DNF10-250FIB IS UL APPROVED FOR USE WITH THE
L
C. 257 F [125 C] MAX. OPERATING TEMPERATURE (UL)
D. 600V. MAX. VOLTAGE RATING
MAX. WIRE
Unitech HT682产品中文彩页
2.8吋全彩触控屏幕
30°角度条形码扫描器人体工学设计，极致顺手 一维、二维或长距离二维条码扫描器集成蓝牙、WiFi、无线通讯功能
轻松掌握，稳定有效
手持式数据采集器
HT682系列
Unitech HT682是一款适合应用于工作环境较为恶劣的工业级数据采集终端，它的外形兼具了适合单手操作的轻巧特性，同时它还拥有强固耐用的IP65防尘、防水等级与1.8米的耐摔防护设计，针对不同产业性质的企业用户，在应用层面上提供更多元的选择与服务，协助企业在资讯化的过程中，提升工作流程效率，强化企业竞争力。
应用范围包含:资产管理与盘点、零售店面盘点订货、仓储管理、速递运输…等。
HT682 1D
HT682 2D
HT682 LR
© 2014 Unitech Electronics Co., LTD. All rights reserved. 精瑞电脑
枪型握把皮套
2/4槽电池充电器数据线大容量电池。
ADM6822中文资料
Low Voltage Supervisory Circuits withWatchdog & Manual Reset in 5-Lead SOT-23 Preliminary Technical Data ADM6821–ADM6825Rev.PrAInformation furnished by Analog Devices is believed to be accurate and reliable.However, no responsibility is assumed by Analog Devices for its use, nor for anyinfringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective companies.One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: Fax: 781.326.8703© 2004 Analog Devices, Inc. All rights reserved.FEATURESPrecision Low Voltage Monitoring down to 1.8V9 Reset Threshold Options:1.58V to 4.63V140ms (Min) Reset TimeoutWatchdog Timer with 1.6s TimeoutManual Reset InputReset Output StagesPush-Pull Active-LowOpen-Drain Active-LowPush-Pull Active-HighLow Power Consumption (3µA)Guaranteed Reset Output valid to V CC=1VPower Supply Glitch ImmunitySpecified from -40°C to +125°C5-Lead SOT-23 PackageAPPLICATIONSMicroprocessor SystemsComputersControllersIntelligent InstrumentsPortable EquipmentGENERAL DESCRIPTIONThe ADM6821-ADM6825 are supervisory circuits which monitor power supply voltage levels and code execution integrity in microprocessor-based systems. As well as providing power-on-reset signals, an on-chip watchdog timer can reset the microprocessor if it fails to strobe within a preset timeout period. A reset signal can also be asserted by means of an external push-button, through a manual reset input. The three parts feature different combinations of watchdog input, manual reset input and output stage configuration, as shown in table 1.FUNCTIONAL BLOCK DIAGRAMMRRESET VEach part is available in a choice of 9 reset threshold options ranging from 1.58V to 4.63V. The reset and watchdog timeout periods are fixed at 140ms (min) and 1.6s (typ), respectively. The ADM6821-ADM6825 are available in 5-lead SOT-23 packages and typically consume only 3µA, making them suitable for use in low power portable applications.Table 1. Selection TableADM6821–ADM6825 Preliminary Technical DataADM6821–ADM6825—SPECIFICATIONSTable 2. V CC=4. 5V to 5.5V for ADM682_L/M, V CC=2.7V to 3.6V for ADM682_T/S/R, V CC=2.1V to 2.75V for ADM682_Z/Y,V CC=1.53V to 2.0V for ADM682_W/V, T A=-40°C to +125°C, unless otherwise noted.Rev.PrA | Page 2 of 7Preliminary Technical DataADM6821–ADM6825Rev.PrA | Page 3 of 7ABSOLUTE MAXIMUM RATINGSTable 3. T A = 25°C unless otherwise noted.Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.ADM6821–ADM6825Preliminary Technical DataRev.PrA | Page 4 of 7PIN CONFIGURATIONS AND FUNCTIONAL DESCRIPTIONSV CCRESET GNDMRWDIV CC GND MRWDI V CC RESET GND RESETWDI V CCRESET GNDRESET MRTable 4. Pin Functional DescriptionsESD CAUTION`ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.Preliminary Technical DataADM6821–ADM6825Rev. PrA | Page 5 of 7ORDERING GUIDEModel Reset Threshold (V) Temperature Range Quantity Package Type Branding ADM6821LART-RL 4.63 -40°C to +125°C 10k SOT-23-5 N0A ADM6821LART-RL7 4.63 -40°C to +125°C 3k SOT-23-5 N0A ADM6821MART-RL 4.38 -40°C to +125°C 10k SOT-23-5 N0A ADM6821MART-RL7 4.38 -40°C to +125°C 3k SOT-23-5 N0A ADM6821TART-RL 3.08 -40°C to +125°C 10k SOT-23-5 N0A ADM6821TART-RL7 3.08 -40°C to +125°C 3k SOT-23-5 N0A ADM6821SART-RL 2.93 -40°C to +125°C 10k SOT-23-5 N0A ADM6821SART-RL7 2.93 -40°C to +125°C 3k SOT-23-5 N0A ADM6821RART-RL 2.63 -40°C to +125°C 10k SOT-23-5 N0A ADM6821RART-RL7 2.63 -40°C to +125°C 3k SOT-23-5 N0A ADM6821ZART-RL 2.32 -40°C to +125°C 10k SOT-23-5 N0A ADM6821ZART-RL7 2.32 -40°C to +125°C 3k SOT-23-5 N0A ADM6821YART-R L 2.19 -40°C to +125°C 10k SOT-23-5 N0A ADM6821YART-R L 7 2.19 -40°C to +125°C 3k SOT-23-5 N0A ADM6821WART-RL 1.67 -40°C to +125°C 10k SOT-23-5 N0A ADM6821WART-RL7 1.67 -40°C to +125°C 3k SOT-23-5 N0A ADM6821VART-RL 1.58 -40°C to +125°C 10k SOT-23-5 N0A ADM6821VART-RL7 1.58 -40°C to +125°C 3k SOT-23-5 N0A ADM6822LART-RL 4.63 -40°C to +125°C 10k SOT-23-5 N0B ADM6822LART-RL7 4.63 -40°C to +125°C 3k SOT-23-5 N0B ADM6822MART-RL 4.38 -40°C to +125°C 10k SOT-23-5 N0B ADM6822MART-RL7 4.38 -40°C to +125°C 3k SOT-23-5 N0B ADM6822TART-RL 3.08 -40°C to +125°C 10k SOT-23-5 N0B ADM6822TART-RL7 3.08 -40°C to +125°C 3k SOT-23-5 N0B ADM6822SART-RL 2.93 -40°C to +125°C 10k SOT-23-5 N0B ADM6822SART-RL7 2.93 -40°C to +125°C 3k SOT-23-5 N0B ADM6822RART-RL 2.63 -40°C to +125°C 10k SOT-23-5 N0B ADM6822RART-RL7 2.63 -40°C to +125°C 3k SOT-23-5 N0B ADM6822ZART-RL 2.32 -40°C to +125°C 10k SOT-23-5 N0B ADM6822ZART-RL7 2.32 -40°C to +125°C 3k SOT-23-5 N0B ADM6822YART-RL 2.19 -40°C to +125°C 10k SOT-23-5 N0B ADM6822YART-RL7 2.19 -40°C to +125°C 3k SOT-23-5 N0B ADM6822WART-RL 1.67 -40°C to +125°C 10k SOT-23-5 N0B ADM6822WART-RL7 1.67 -40°C to +125°C 3k SOT-23-5 N0B ADM6822VART-RL 1.58 -40°C to +125°C 10k SOT-23-5 N0B ADM6822VART-RL7 1.58 -40°C to +125°C 3k SOT-23-5 N0B ADM6823LART-RL 4.63 -40°C to +125°C 10k SOT-23-5 N0C ADM6823LART-RL7 4.63 -40°C to +125°C 3k SOT-23-5 N0C ADM6823MART-RL 4.38 -40°C to +125°C 10k SOT-23-5 N0C ADM6823MART-RL7 4.38 -40°C to +125°C 3k SOT-23-5 N0C ADM6823TART-RL 3.08 -40°C to +125°C 10k SOT-23-5 N0C ADM6823TART-RL7 3.08 -40°C to +125°C 3k SOT-23-5 N0C ADM6823SART-RL 2.93 -40°C to +125°C 10k SOT-23-5 N0C ADM6823SART-RL7 2.93 -40°C to +125°C 3k SOT-23-5 N0C ADM6823RART-RL 2.63 -40°C to +125°C 10k SOT-23-5 N0C ADM6823RART-RL7 2.63 -40°C to +125°C 3k SOT-23-5 N0C ADM6823ZART-RL 2.32 -40°C to +125°C 10k SOT-23-5 N0C ADM6823ZART-RL7 2.32 -40°C to +125°C 3k SOT-23-5 N0C ADM6823YART-R L2.19 -40°C to +125°C 10k SOT-23-5 N0C ADM6823YART-R L 7 2.19 -40°C to +125°C 3kSOT-23-5N0CADM6821–ADM6825Preliminary Technical DataRev.PrA | Page 6 of 7ORDERING GUIDE (CONTD.)Model Reset Threshold (V) Temperature Range Quantity Package Type Branding ADM6823WART-RL 1.67 -40°C to +125°C 10k SOT-23-5 N0C ADM6823WART-RL7 1.67 -40°C to +125°C 3k SOT-23-5 N0C ADM6823VART-RL 1.58 -40°C to +125°C 10k SOT-23-5 N0C ADM6823VART-RL7 1.58 -40°C to +125°C 3k SOT-23-5 N0C ADM6824LART-RL 4.63 -40°C to +125°C 10k SOT-23-5 N0D ADM6824LART-RL7 4.63 -40°C to +125°C 3k SOT-23-5 N0D ADM6824MART-RL 4.38 -40°C to +125°C 10k SOT-23-5 N0D ADM6824MART-RL7 4.38 -40°C to +125°C 3k SOT-23-5 N0D ADM6824TART-RL 3.08 -40°C to +125°C 10k SOT-23-5 N0D ADM6824TART-RL7 3.08 -40°C to +125°C 3k SOT-23-5 N0D ADM6824SART-RL 2.93 -40°C to +125°C 10k SOT-23-5 N0D ADM6824SART-RL7 2.93 -40°C to +125°C 3k SOT-23-5 N0D ADM6824RART-RL 2.63 -40°C to +125°C 10k SOT-23-5 N0D ADM6824RART-RL7 2.63 -40°C to +125°C 3k SOT-23-5 N0D ADM6824ZART-RL 2.32 -40°C to +125°C 10k SOT-23-5 N0D ADM6824ZART-RL7 2.32 -40°C to +125°C 3k SOT-23-5 N0D ADM6824YART-R L 2.19 -40°C to +125°C 10k SOT-23-5 N0D ADM6824YART-R L 7 2.19 -40°C to +125°C 3k SOT-23-5 N0D ADM6824WART-RL 1.67 -40°C to +125°C 10k SOT-23-5 N0D ADM6824WART-RL7 1.67 -40°C to +125°C 3k SOT-23-5 N0D ADM6824VART-RL 1.58 -40°C to +125°C 10k SOT-23-5 N0D ADM6824VART-RL7 1.58 -40°C to +125°C 3k SOT-23-5 N0D ADM6825LART-RL 4.63 -40°C to +125°C 10k SOT-23-5 N0E ADM6825LART-RL7 4.63 -40°C to +125°C 3k SOT-23-5 N0E ADM6825MART-RL 4.38 -40°C to +125°C 10k SOT-23-5 N0E ADM6825MART-RL7 4.38 -40°C to +125°C 3k SOT-23-5 N0E ADM6825TART-RL 3.08 -40°C to +125°C 10k SOT-23-5 N0E ADM6825TART-RL7 3.08 -40°C to +125°C 3k SOT-23-5 N0E ADM6825SART-RL 2.93 -40°C to +125°C 10k SOT-23-5 N0E ADM6825SART-RL7 2.93 -40°C to +125°C 3k SOT-23-5 N0E ADM6825RART-RL 2.63 -40°C to +125°C 10k SOT-23-5 N0E ADM6825RART-RL7 2.63 -40°C to +125°C 3k SOT-23-5 N0E ADM6825ZART-RL 2.32 -40°C to +125°C 10k SOT-23-5 N0E ADM6825ZART-RL7 2.32 -40°C to +125°C 3k SOT-23-5 N0E ADM6825YART-R L 2.19 -40°C to +125°C 10k SOT-23-5 N0E ADM6825YART-R L 7 2.19 -40°C to +125°C 3k SOT-23-5 N0E ADM6825WART-RL 1.67 -40°C to +125°C 10k SOT-23-5 N0E ADM6825WART-RL7 1.67 -40°C to +125°C 3k SOT-23-5 N0E ADM6825VART-RL 1.58 -40°C to +125°C 10k SOT-23-5 N0E ADM6825VART-RL7 1.58 -40°C to +125°C 3kSOT-23-5N0EPreliminary Technical DataADM6821–ADM6825Rev. PrA | Page 7 of 7OUTLINE DIMENSIONS0.3PLANECOMPLIANT TO JEDEC STANDARDS MO-178AAFigure 1. 5-Lead Small Outline Transistor Package [SOT-23](RT-5)Dimensions shown in millimeters© 2004 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective companies. Printed in the U.S.A.。
28202;中文规格书,Datasheet资料
599 Menlo Drive, Suite 100Rocklin, California 95765, USAOffice: (916) 624-8333Fax: (916) 624-8003General: info@Technical: support@Web Site: Educational: Gripper Kit for the Boe-Bot® Robot (#28202)The Gripper KitThis kit allows your Parallax Boe-Bot® Robot to pick up objects. TheBoe-Bot robot (#28132 serial or #28832 USB) is sold separately.Before getting started, take an inventory of the parts in your kit. UseFig #1 to identify each part to the parts list. Once you haveinventoried your kit, proceed to Step #1.11423456791011121315161783Recommended Tools•Small needle nosed pliers•Phillips #2 point screwdriver•Small flat-blade screwdriver• A sharp-tipped hobby knife,such as an X-Acto® knife-OR-A hand drill with 5/64″ bitWARNING!DO NOT use electricscrewdrivers with this kit. Pleaseassemble using hand tools onlyto avoid damaging your Gripper.Step #1: SpacersItem Qty Description 4 (2) Gripper link 5 (2) #4 x 1" spacer• Insert spacers into plastic Gripper links. • Use Fig #2 as a guide to install the spacers. Whendone, the pieces will appear as shown in Fig #3.Fig #2Fig #3Step #2: Gripper LinksItem Qty Description6 (1) Gripper plate7 (2) 4-40 x 1.25" pan head screw8 (2) 4-40 Hex Nut•Be sure the angled portions on top of the plastic links match the angles on top of the Gripper as shown in Fig #5.• Move links and spacers into the Gripper plate, thensecure with 4-40 screws and nuts as shown in Fig #4. • Tighten securely.• Before continuing, double check your work to ensurethat the pieces are angled as in Fig #5.Fig #4 Fig #5Step #3: Foam TapeItem Qty Description14 (4) foam tape• Cut four pieces of foam tape, each 2 inches long. •Apply foam tape to the Gripper plate as shown in Fig #7.This completes the left-side Gripper sub-assembly.Fig #6Fig #7Step #4: Second Gripper Sub-assemblyItem Qty Description4 (2) Gripper link5 (2) #4 x 1" spacer6 (1) Gripper plate7 (2) 4-40 x 1.25" pan head screw8 (2) 4-40 hex nut 14 (4) foam tape• Repeat Steps #1 through #3 to build the right-sideGripper sub-assembly in a similar fashion.• Be sure the angled portions of the links match with theGrippers face to face. Position the pieces exactly as they appear in Fig #8.• Double check your work, then proceed to Step #5.Fig #8•Assemble the Gripper sub-assemblies to the upperand lower linkage plates as shown in Fig #9. In turn, insert each plastic link, a spacer, and secure with 4-40 screws and nuts.• When all four plastic links are installed, tighten securely.•Double check your work against Fig #10. Note that the hinge tabs on the bottom plate face up, while hinge tabs on top plate face down.Step #5: Linkage PlatesItem Qty Description3 (2) linkage plate 5 (4)#4 x 1" spacer 7(4) 4-40 x 1.25" pan head screw 8 (4) 4-40 hex nutStep #6: Control ArmsItem Qty Description 10 (2) control arm 15 (4) 4-40 x ¼" pan head screw• Attach control arms with 4-40 x ¼" screws as shown in Fig #11.•Final assembly must match Fig #12. Double check your work, then proceed to Step #7.Fig #11Fig #12Step #7: E-Z ConnectorsItem Qty Description 13 (2) Brass 0.072 E-Z Connector• Follow the directions on the package to install the E/Z Connector into the control arms. Use the nylon washers, but set the screws aside for now.• Check your work; your final assembly should match Fig #13.Fig #13Step #8: Install Gripper Hinge PlateItem Qty Description1 (1) hinge mount 15 (3) 4-40 x ¼" pan head screw 8 (3) 4-40 hex nutNote: It is recommended that the servos and tires on the Boe-Bot be installed with the wheels biased toward the front of the unit as shown below. This will prevent the Boe-Bot from tipping when it picks up objects.• Attach hinge mount to the Boe-Bot with the 4-40 x ¼" screws and nuts as shown in Fig #14 and Fig #15. • Double check your work against Fig #16.Fig #14 Top ViewFig #15 Bottom ViewFig #16Assembled ViewStep #9: Position Gripper on Boe-BotItem Qty Description(1) Gripper assembly (1) Boe-Bot robot• Remove one wheel to allow for dowel pin installation in the next step, Step #10.• Position the Gripper assembly onto the hinge mount as shown in Fig #17 below.•Place the top hinge tabs over the tabs on the hinge mount so the top of the Gripper stays on the hinge mount.Fig #17Step #10: Insert Dowel Pin Item Qty Description2 (1) dowelpin• Insert dowel pin.•If dowel pin slips in very easily, use needle nose pliers to slightly crimp the center of the hinge plate.• Replace wheel.Fig #18Fig #19Fig #21Step #12: Servo BracketsItem Qty Description16 (2) servo brackets 17 (4) 4-40 x 3/8" pan head screw 8 (4) 4-40 hex nut 11 (1) Parallax Standard Serv o• Attach servo brackets to servo with 4-40 screws and nuts. Make sure the metal brackets are placed below the plastic servo tabs as shown in Fig #22.•The final assembly should match Fig #23. Double check your work, then proceed to Step #13.Note: Only one arm of the servo horn is shown for clarity.Fig #22Fig #23Step #13: Bend Actuator RodItem Qty Description 12 (1) actuator rod•Using the needle nose pliers, bend actuator rod at mid-point. Then bend as shown in Fig #24.Fig #24Step #14: Install Actuator Rod Item Qty Description12 (1) actuatorrod11 (1) Parallax Standard Servo•Thread bent rod through servo horn as shown in Fig #25.Fig #25分销商库存信息: PARALLAX 28202。
HTB-82M8中文资料
Description• For 1/4" x 1-1/4" and 5mm x 20mm fuses • All holder bodies have the option of using 1/4" x 1-1/4" or 5mm x 20mm carriers• Withstands 15 to 20 lbs-in torque to mounting nut when mounting fuseholder to panel • High temperature, flame retardant, Thermoplastic meets UL 94 VOAgency Information• UL Recognized:IZL T2, E14853• CSA Component Acceptance:Class 6225-01, File 47235FuseholdersHTB Panel Mount SeriesReplacement PartsMaximum Panel ThicknessBody TypeInch MillimetersHTB-20.307.62HTB-30.307.62HTB-40.125 3.18HTB-50.125 3.18HTB-60.307.62HTB-80.125 3.18HTB-90.1253.18SPECIFICATIONSProduct Current Voltage Fuse Quick Code Rating Rating Size Connect HTB-X2I 15A 250V 1/4" x 1-1/4"3/16"HTB-X4I 15A 250V 1/4" x 1-1/4"3/16"HTB-X6I 20A 250V 1/4" x 1-1/4"1/4"HTB-X8I 20A 250V 1/4" x 1-1/4"1/4"HTB-X2M 15A 250V 5mm x 20mm 3/16"HTB-X4M 15A 250V 5mm x 20mm 3/16"HTB-X6M 16A 250V 5mm x 20mm 1/4"HTB-X8M 16A250V5mm x 20mm 1/4"FuseholdersHTB Panel Mount SeriesVisit us on the Web at 3601 Quantum Boulevard Boynton Beach, Florida 33426-8638T el:+1-561-752-5000 T oll Free:+1-888-414-2645 Fax:+1-561-742-1178This bulletin is intended to present product design solutions and technical information that will help the end user with design applications. Cooper Electronic Technologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Electronic Technologies also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.OC-2580 5/02© Cooper Electronic Technologies 2002PACKAGING CODEPackaging CodeDescriptionBlank 10 pieces of fuseholders packed into a cartonBK100 pieces of fuseholders packed into a cardboard shelf package。
卡特(Cat) PM820、PM822和PM825凝胶机械拉拔机说明文件
Cat® C18 ACERT™ EngineGross Power (ISO 14396)563 kW 755 hp Operating WeightPM820 36 130 kg 79,630 lb PM822 36 700 kg 80,887 lb PM825 37 500 kg 82,650 lb Cutting DimensionsWidth - PM820 2010 mm 79 in Width - PM822 2235 mm 88 in Width - PM825 2505 mm 98.8 in Maximum Cutting Depth 330 mm 13 inPM820, PM822 and PM825 Cold Planers2CONTENTSIntroduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3Machine Feature Overview ....................4, 5Powertrain, Undercarriage ....................6, 7Operating Environment ........................8, 9Cutting System .............................10, 11Cat Grade Control Option ....................12, 13Material Collection System ..................14, 15Optional Equipment .........................16, 17Service and Reliability. . . . . . . . . . . . . . . . . . . . . . . 18, 19Cutting Bits ...................................20Cat Diamond Bits ..............................21Specifications ..............................22, 2323THE HIGH POWER HALF-LANE MILLING MACHINES YOU HAVE BEEN WAITING FORCat ® PM820, PM822 and PM825 cold planers are the product of years of study, tinkering, rethinking. Every system andcomponent has been examined, refined, optimized. The result is an advanced, world-class cold planer.The PM800 models are similar in design to their sister PM600 half lane cold planers...but they bring a lot more power, useful for the most demanding applications. The PM800 models deliver the same benefits as well: lowered operating costs and increased productivity, paired with Cat reliability and the legendary dealer support you expect from Caterpillar.The PM820, PM822 and PM825 are well equipped to deliver precision and efficient high production. Many options are available to enhance machine versatility and customize operations to suit the application, from milling highways to urban streets. Whether you are texturing the surface or milling an airport runway, there is a configuration that will meet your requirements and expectations.POWERFUL AND REFINEDPRECISION AND CONTROL WITH VERSATILITY TO SPARE.4938641011121413612457721. Cat C18 ACERT ™ Engine2. Ground Control Console3. Rear Water Fill Nozzle4. Remote Camera (option)5.Hydraulic Side Plates with Position Sensors6. Crawler Tracks with Bolt-on Pads7. Advanced Steering8. Dual Operating Consoles 9. Power Canopy (optional windscreens available, not shown)10. Dust Abatement System (option)11. High Pressure Water Spray Hose (option)12. Water Spray Control and Clean out Manifold13. LCD Touchscreen Display 14. Cat Diamond Bits (option)15. Cat Grade Control (option)515152744667891013142RUGGED POWERTRAIN SIMPLE DESIGN DELIVERS AMPLE POWER TO GROUND.C18 ACERT ENGINE– Meets regional emission standards as required:U.S. EPA Tier 4 Final / EU Stage IV– Provides a gross power of 563 kW (755 hp)– Automatic idle control function and multiple rotor speedsoptimizes output to the demand on the engine, keepingoperation smooth and efficient– High capacity cooling system keeps engine at idealtemperature for optimal fuel efficiency and lower emissions– Proven core engine design ensures reliability and quietoperation– Engine is iso-mounted to reduce noise and vibration6PROPEL SYSTEM– Robust propel system features two propel pumps and two propel circuits, diagonally opposed; each circuit drives the propel motors for two crawler tracks– Cross-flow traction control supplies dedicated hydraulic flowdiagonally across machine to the tracks that grip– Automatic Load Control senses load changes on the rotor system load and adjusts propel speed to prevent stalls and optimizeproduction7STABLE PLATFORM– Four leg posts with position sensors independently adjust and provide powered vertical movement to maintain desired height – Ride-control feature ensures smooth travel– Optional Cat Grade Control is integrated with the machine and works seamlessly to provide maximum cutting precision; system can be enhanced to full 3D milling capabilityWORRY-FREE TRACKS– Four crawler tracks based on proven Cat track design and components– Tracks automatically adjust to provide ideal tension – Track pads are easily replaceable with bolt-on designEXCELLENT MANEUVERABILITY– Four steering modes: front steer, rear steer, crab steer, coordinated steer– Advanced steering function adjusts track alignment to provide precise steering geometry and reduce pad wear – Minimum left cutting radius: 2 m (6.56 ft)– Minimum right cutting radius: PM820- 2 m (6.56 ft) PM822- 1.8 m (5.91 ft)PM825- 1.5 m (4.92 ft)The four post design offers excellent maneuverability and dependable operation to maximize versatility and production.8OPERATING ENVIRONMENT– Height-adjustable dual operating console is intuitive and comfortable– Optional power canopy can deploy or stow during machine operation; optional windscreen panels available– Touchscreen LCD display provides gauge cluster, operating information, remote camera feed, machine control anddiagnostics; optional second and third display available to provide additional gauge or machine operation/control information – Optional suspension seats reposition for optimal visibility and comfort– Lockable storage provides secure area to stow personal items – 12-volt power receptacleERGONOMIC CONTROLS– Controls comfortably positioned for easy use– Large, backlit keypads are visible in all light conditions – Durable design tested to 1 million cycles– Lockable covers provide protection from vandalismEQUIPPED FOR 24/7 OPERATION– Working areas and perimeter well lit with standard halogen lights – Displays and controls easy to see – Additional LED light options – Available balloon lighting optionsCOMFORT AND CONTROLOPERATE WITH CONFIDENCE.REAR910ROBUST ROTOR CHAMBER– Chamber optimizes material flow to promote thorough clean-out – Thicker steel in areas exposed to high abrasion enhances durability– Side plates are hydraulically adjustable with position-sensing cylinders, can be used as an averaging ski– Hydraulically adjustable moldboard applies optimal down-pressure to keep material contained for clean out and minimize required sweepingANTI-SLAB DEVICE– Helps to optimize sizing and gradation – Protects collecting conveyor– Prevents blockage in the discharge openingTHE VERSATILITY YOU NEED– Two available cutting widths; – Cutting depth to 330 mm (13 in)– Enhanced clearance for flush cutting– Three rotor speeds, electronically selectable during operation – High production and fine milling drums available – Optional Cat Grade Control keeps machine on targetCUTTING SYSTEMEFFICIENT AND DEPENDABLE, AS IT SHOULD BE.11ADVANCED AUTOMATED FEATURES– Automatic Load Control senses load changes on the rotor and adjusts propel speed to prevent stalls and optimize production– Automatic plunge-cut feature ensures precise, repeatable starting cuts and reduces wear on machine (requires Cat Grade Control option)– Ramp-in, Ramp-out cutting capability (requires Cat Grade Control option)– Jump hold feature assists to clear obstaclesROTOR DRIVE SYSTEM– Driven by two 6-rib high-tensile belts– Automatic belt tensioning to reduce slippage – Heavy-duty dry clutchHIGH PRODUCTION ROTORS– 2.0 m (79 in), 2.2 m (88 in) or 2.5 (98.6 in) cutting widths– Cutting bits held in exclusive conical quick-release tool holders and arranged in a triple-wrap flight pattern– Large, replaceable carbide-faced loading paddles effectively move milled material onto collecting conveyor– Standard 15 mm (0.6 in) tool tip spacing is optimal for high production and reduced wear– Triple tree tool arrangement on rotor ends reduces wear on rotor when maneuvering in the cut– Cat MasterGrade™ premium carbide bits available – Optional Cat Diamond Bits provide cutting life up to 80 times longer than conventional carbide bits, decreasing overall fuel consumption and reducing machine wear12INTEGRATED DESIGN– System communicates directly with position-sensing hydraulic cylinders, slope sensors and processors to ensure optimalprecisionCONTROL BOXES– LCD color touchscreen display with soft keys is durable andvisible in all light conditions– Intuitive interface is easy to understand and use– Supports multiple languages– Control boxes and sensors can be repositioned withoutreconfiguring settings– Full control over grade and slope can be attained from anycontrol boxCAT GRADE CONTROLEASY TO USE; HIGH PRECISION.BLUE: Averaged readings RED: Discarded readings1REFERENCE VERSATILITY1. Sonic Mounting Point2. Control Box Mounting Point3. Position-sensing Independently Controlled Side Plates4. Optional Position-sensing Hydraulically Controlled Inboard Ski2234SYSTEM VERSATILITY– System can utilize various references including sonics, contact sensors, position sensing hydraulic cylinders, wire rope sensors – Can be enhanced for full 3D operation– Sensors can be positioned in multiple inboard or external locations around the machineSONIC SENSORS– Sensor units feature five ceramic transducers– System discards the highest and lowest readings and averages remaining three for a true average– Each unit equipped with temperature sensor that compensates for fluctuations due to temperature change– Durable construction outlasts foil transducer design1113Each sensor has five transducers; the high and low readings are discarded and the remaining three are averaged for a true average reading.The high-capacity conveyors provide efficient removal of milled material and dust with outstanding discharge control.COLLECTING CONVEYOR– A wide opening and seamless 850 mm (33.5 in) wide belt efficiently clears rotor chamber– Reversible for easy clean out– Optional grease tensioner provides easy adjustment of belt alignment and tension WATER SPRAY SYSTEM– Water spray system provides lubrication and cools bits whilehelping to control dust– Spray system fed by 3400 L (898 gal) onboard tank; tank can be filled from top deck ports, rear fill valve, side fill valve or optional refill pump– Optional additional water spray system provides maximumlubrication, cooling and dust suppression– Onboard winterization system utilizes compressed air to purge water lines1415LOADING CONVEYOR– Aluminum covers and vinyl side panels reduce spillage and help control dust– Seamless 850 mm (33.5 in) wide belt provides heavy duty, high speed discharge– Variable belt speed optimizes speed to material type and production rate– Reversible for easy clean out– “Boost” feature provides a temporary surge in belt speed to help precisely place material– Loading conveyor folds to reduce length for transport– Loading conveyor swings 60 degrees from center position to the left or right60˚60˚OPTIONAL DUST ABATEMENT SYSTEM– Vacuum system ports to collecting conveyor housing and transition between collecting and loading conveyor to remove airborne particles– Augments dust suppression provided by water spray system – Discharges collected dust into the loading conveyor to facilitate removal from working area around machine – Maximizes dust removal capability when used with water spray system and optional additional water spray systemCAT GRADE AND SLOPE CONTROLSystem is integrated with the machine for maximum precision POWER SUN CANOPYDeploys or stows hydraulicallyWINDSCREENS FOR POWER SUN CANOPYCAT DIAMOND BITSLasts up to 80 times longer than conventional carbide bits ADDITIONAL LCD TOUCHSCREEN DISPLAYFor use to monitor machine functionsPRODUCT LINK, ADDITIONAL CONFIGURATIONSKeep track of your machine health, location or fleet use ADDITIONAL WATER SPRAY SYSTEMSecond system augments lubrication, bit cooling and dust suppression capabilities of the standard systemINBOARD AVERAGING SKIHydraulically controlled ski provides inboard reference for grade control systemROTOR TURNING DEVICEAssists with turning rotor during rotor serviceDUST ABATEMENT SYSTEMVacuum system ports to the transition area between the rotor chamber and the collecting conveyor as well as the transition between the collecting conveyor and the loading conveyor; dust is removed and expelled within the loading conveyor, where is it discharged with the milled materialREMOTE CAMERA, LOADING CONVEYORMounts to the discharge end of the loading conveyor; provides enhanced view of discharge loading REMOTE CAMERA, REARMounts to the rear of machine; provides enhanced view of area behind the machineREMOTE CAMERA, MAGNETIC MOUNTMounts magnetically to various locations; up to two magnetic cameras can be usedSUSPENSION SEATAdjustable seats installed on operator’s platformBIT BUCKET TRAYSTrays mount to rear crawlers and provide convenient storage for bit bucketsHIGH PRESSURE WASHDOWN SYSTEMHigh pressure hose and spray wand connect to onboard water tank to deliver high pressure water spray for convenient clean up WATER TANK TRANSFER PUMPWater pump provides additional options to fill onboard water tank FUEL TRANSFER PUMPFuel pump provides additional options to fill fuel tank WARNING BEACON, FIXEDAmber warning beacon mounts to one of two fixed locations on loading conveyor or rear of machineWARNING BEACON, MAGNETIC MOUNTAmber warning beacon can be magnetically mounted in multiple locations on the machineCOMMISSIONING SUPPORTCat technician provides machine introduction and training to key personnelOPTIONAL EQUIPMENT OPTIMIZE VERSATILITY, PRODUCTIVITY, COMFORT.161.Power Sun Canopy2. Inboard Averaging Ski3.Dust Abatement System4. Remote Camera, Loading Conveyor5.Remote Camera, Magnetic Mount6.Bit Bucket Trays7.High Pressure Washdown System8. Water Tank Transfer Pump3861245717EASY SERVICE DESIGNED RIGHT IN.Outstanding access to critical components and systems makes service and maintenance easier and faster. That keeps your machine where you need it: on the job.LARGE ACCESS DOORS AND PANELS– Designed to facilitate efficient service, reducing labor costs and service time– Quick and easy maintenance– Accessible pumps and components– Power hood opens to allow walk-in access– Visual indicators simplify routine service checks18HYDRAULIC SYSTEM– Manual overrides simplify troubleshooting by eliminatingfunctioning systems– Hydraulic hoses are cleanly routed and clamped for long-term reliability– Exposed hoses are wrapped in nylon sleeves for protectionagainst abrasion– Pressure test ports and oil sampling ports simplify hydraulicsystem diagnosisELECTRICAL SYSTEM– 24-volt system with 100 amp alternator– Color-coded and numbered electrical wiring simplifiestroubleshooting– Harnesses are wrapped in abrasion-resistant nylon braid ELECTRONIC CONTROL MODULES (ECM)– Monitors machine systems to ensure proper function andprecision– Provides warning indications via LCD touchscreen display when machine performance is substandard– Provides diagnostic information TELEMATICS: PRODUCT LINK™– Maximize up-time– Automatic machine location– Hour updates– Diagnostic codes– Schedule service at convenient times– Optional configurations availableLONG SERVICE INTERVALS– 500 hour engine oil service interval– 3,000 hour hydraulic oil service interval without oil sampling;6,000 hours with oil samplingACCESSORY DRIVE SYSTEM– Provides full operational control of auxiliary machine functions to enable assisted machine movement during maintenance or service– Facilitates assisted relocation of machine from live construction area to service area during emergency situations19Pallet ConcreteAsphalt or Asphalt off ConcreteAsphaltShallow 25 - 50 mm (1” - 2”)Moderate 75 - 125 mm (3” - 5”)Deep 150 mm (6” o r more)Puller Tool351-267844444292-510344444349-49464444316-23274444350-71994444Ø19.4Ø19.822182117217PROVEN BENEFITSMore efficiency, more productivity, lower fuel consumption and less wear on the machine. It all adds up to more profitability and growth for your company.– Last up to 80x longer than carbide tips, keeping crews more productive, month after month– Assure faster project completions– Provide you with a significant bidding advantage– Virtually eliminate labor costs for pick changes; eliminate unplanned, unproductive interruptions– Deliver proven fuel savings per ton of production– Enable faster milling speeds and increased productivity– Eliminate costly bit inventory, and the handling that goes with it– Require no rotation, crucial because half of carbide failures result when tools fail to turn– Create less vibration, increasing the life of planetaries, drive shafts, stub shafts, bearings and other parts and components– Increase track-pad life because the machine does not work as hard– Deliver a dramatically improved return on your mill investment through increased engagement– Extend life of moldboards through a consistent pattern; protect welded-on base blocks—and ultimately the drum Average life and exact tonnage is impacted by local aggregate and operating technique. Diamond Asphalt Bits last up to 45x the life of standard carbide bits and Diamond Extended Life Bits last up to 80x the life of standard carbide bits.STAY SHARP UP TO 80X CONVENTIONAL CARBIDE.2122SPECIFICATIONSHH23Weights shown are approximate and include:• Operating weights include coolants, lubricants, full fuel tank, full water tank and 75 kg (165 lb) operator.• Transport weights include coolants, lubricants, 50% full fuel tank and empty water tank.WeightPM820Operating weight 36 130 kg 79,630 lb Transport weight 32 230 kg71,035 lbPM822Operating weight 36 700 kg 80,887 lb Transport weight 32 800 kg 72,290 lbPM825Operating weight 37 500 kg 82,650 lb Transport weight33 600 kg 74,054 lbFuel Tank1108 L 288.1 gal Cooling System 104 L 27.5 gal Engine Oil 65 L 16.9 gal Hydraulic Oil 113 L 29.4 gal Water Tank3400 L898 galService Refill CapacitiesCat C18 ACERT Engine Gross power - ISO 14396 563 kW 755 hp Global emissions US EPA Tier 4 Final / EU Stage IVor Tier 3 / Stage IIIA / China Stage III equivalentOperating speed100 m/min 328 ft/min Maximum travel speed 5.9 km/h 3.7 mphPowertrainPM820 Milling Width2010 mm 79.1 in Number of Bits 170PM822 Milling Width 2235 mm 88 in Number of Bits 185PM825 Milling Width 2505 mm 98.6 in Number of Bits203Maximum Cutting Depth 330 mm 13 in Rotor Speeds100 / 109 / 118 rpmCutting SystemPower CanopyWindscreens for Power Canopy Inboard Averaging Ski CE CertificateAdditional Water Spray System Water Tank Transfer Pump Fuel Transfer Pump Dust Abatement System Cat Grade ControlRemote Camera (Front, Rear, or Magnet Mount)Product Link (optional configuration)Air-ride Operator’s Seats Drum Rotating Device Cat Diamond Bits Bit Bucket TraysMachine Commissioning SupportOptional EquipmentSPECIFICATIONSA Overall length, conveyor up14.52 m 47.62 ft B Maximum machine width - PM820, PM822 2.83 m 9.27 ft Maximum machine width - PM825 3.14 m 10.03 ft C Cutting width - PM820 2010 mm 79.1 in Cutting width - PM822 2235 mm 88 in Cutting width - PM8252505 mm 98.6 in D Maximum height, raised conveyor 5.23 m 17.17 ft E Height to optional canopy4.05 m 13.29 ft F Height, no canopy (canopy down) 3.00 m 9.84 ft G Maximum truck clearance 4.86 m 15.95 ft HConveyor swing± 60˚ from centerOperating DimensionsI Transport length12.43 m 40.79 ft J Transport width - PM820 2.50 m 8.2 ft Transport width - PM822 2.70 m 8.83 ft Transport width - PM825 3.01 m 9.88 ft K Length, track to track 6.69 m 21.95 ft L Length of base machine 8.33 m 27.33 ft FTransport height3.00 m 9.84 ftShipping DimensionsPM820, PM822 AND PM825 Cold Planers。
82寸液晶监视器
82寸液晶监视器
（DC820D）
影来腾贸易（上海）有限公司2012年04月
液晶监视器主要功能特点：
※采用全高清Full HD液晶屏,整机超薄超轻设计，外形美观※具有VGA状态图像重显率自动调整功能
※采用最新3D画质数字处理电路，图像清晰，视角宽阔
※支持全高清数字信号，支持流畅运行1080p视频
※高亮度高对比度,8ms急速响应时间，画面真正无拖尾
※内置电源，能耗低，液晶屏使用寿命可达5万小时以上
※超静音冷却风扇设计,智能温控,红宝石电容，整机寿命更长※采用金属外壳，防静电、防磁场、防强电场干扰无辐射
※具有电脑对屏，四画面,漫游等多种图像管理功能(可选)
※操作方式红外遥控, 简便易行
技术参数
安装尺寸图纸
（安装采用外六角 6-M10*25螺丝）
※产品具体规格请以实物为准，如有变化恕不另行通知。
※。
施耐德Modicon M258可编程控制器产品目录
M258 可编程控制器都标配 4 路电压或电流模拟量输入 (12 位分辨率)。
<பைடு நூலகம்温度控制
此外还提供2、4或6通道以及12或16位不同分辨分辨率的扩展模块。 M258可编程控制器性能强大，能够连接多达200个模拟量I/O和/或温度模块，从而减
2
少了对设备需求的限制。
模拟量控制功能
< 速度控制
最多8通道高速 计数
软件组态
所有 M258
置和编程功能旨在降低成本和优化设备性能。
SoMachine 软件支持六种 IEC 61131-3 编程语言： v IL (指令表) v LD (梯形图) v SFC (顺序功能块) v ST (结构文本) v FBD (功能块图) v CFC (连续功能图)
另外还支持 PLCopen 功能块，以管理设备的运动控制和轴控制。
4个控制器状态ledrunmsbatteryapp0app16个内置通信端口状态ledethlaethstethnsusbhostmbscomcansts用于在5对称导轨上安装卸载的锁扣两个用于通信模块的pci闲置插槽带有可插拔接线端子和锁扣显示块和标签插槽的24电源模块io模块每个模块都具有带锁扣的可插拔接线端子显示io状态的显示块和标签夹持器插槽带上锁解锁功能的锁扣的可插拔接线端子在侧面用于连接下一个模块的总线扩展连接器rtc实时时钟电池插槽连接usb存储卡用于传输程序数据或固件更新的usba连接器标记为host用于连接编程计算机的usbb微型连接器标记为pgrport用于连接以太网和或magelisxbtgt图形终端的rj45连接器标记为ethernet用于连接rs232或rs485串行链路的rj45连接器标记为mbs9芯subd公头连接器标记为can0用于连接canopen总线仅限tm258lf42dt4ltm258lf42drtm258lf66dt4l1011
8205中文资料
U E D P R O D U C T R E F E R E N C E O N L Y Designed specifically to meet the requirement for extended opera-tion of battery-powered equipment such as cordless and cellular tele-phones, the A8205SLH voltage regulators offer the reduced dropout voltage and quiescent current essential for maximum battery life.Applicable also to palmtop computers and personal data assistants,these devices deliver a regulated output at up to 200 mA (transient),which is limited only by package power dissipation. Regulated output voltages of 2.7, 2.8, 3.0, 3.3, 3.6, 4.0, and 5.0 V are currently provided.Other voltages, down to 2.0 volts, are available on special order.A PMOS pass element provides a typical dropout voltage of only 75 mV at 100 mA of load current. The low dropout voltage permits deeper battery discharge before output regulation is lost. Quiescent current does not increase significantly as the dropout voltage is ap-proached, an ideal feature in standby/resume power systems where data integrity is crucial. Regulator accuracy and excellent temperature characteristics are provided by a bandgap reference. The A8205SLH includes an ENABLE input to give the designer complete control over power up, standby, or power down.These devices are supplied in a thermally enhanced 5-lead small-outline plastic package similar to the SOT-23, and fitting the SC-74A footprint. All devices are rated for operation over a temperature range of -20°C to +85°C.FEATURES AND BENEFITSI High Efficiency Provides Extended Battery Life I 75 mV Typical Dropout Voltage at I O = 100 mA I 55 µA Typical Quiescent Current Less Than 1 µA “Sleep” Current I Low Output NoiseI 200 mA Peak Output CurrentI Improved PSRR and Transient PerformanceAPPLICATIONSI Cordless and Cellular Telephones I Personal Data Assistants I Personal Communicators IPalmtop ComputersLOW-DROPOUT REGULATORS— HIGH EFFICIENCYData Sheet 27468.20Always order by complete part number, e.g., A8205SLH-xx , where “xx”is the required output voltage in tenths or “ADJ” for adjustable.8205PRELIMINARY INFORMATION(subject to change without notice)December 6, 19998205LOW-DROPOUTREGULATORS115 Northeast Cutoff, Box 15036Worcester, Massachusetts 01615-0036 (508) 853-5000Copyright © 1999, 2000 Allegro MicroSystems, Inc.A8205SLH Maximum Allowable Average Output Current* with device mounted on 2.24" x 2.24"(56.9 mm x 56.9 mm) solder-coated copper-clad board in still air.Allowable Total Average (10 ms) Output Current in Milliamperes with T J = 150°C, Duty Cycle = 100%†V I - V OT A 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0* 4.5*25°C 20020020020020018916214212650°C 20020020020018215213011410170°C 200200200182145121104918185°C20020019714811898847466* Absolute maximum peak output current rating is 200 mA; absolute maximum input voltage is 7 V.† I O = (T J – T A )/([V I – V O ] R θJA x dc) = (150 – T A )/([V I – V O ] x 220 x 1.00)Output current rating can be increased (to 200 mA maximum) by additional heat sinking or reducing the duty cycle.8205LOW-DROPOUT REGULATORSELECTRICAL CHARACTERISTICS at T A = +25°C, V E = V I (unless otherwise noted).LimitsCharacteristic Symbol Test ConditionsMin.Typ.Max.UnitsOutput VoltageV O V I ≥ V O(nom) + 1 V, 1 mA ≤ I O ≤ 150 mA*,reference specified V O(nom)—0.0±1.5%Output Volt. Temp. Coeff.a VO V I = 6 V, I O = 10 mA, T J ≤ 125°C —40—ppm/°C Line Regulation ∆V O(∆VI)V O(nom) + 1 V ≤ V I ≤ 7 V, I O = 3 mA ——±1.5%Load Regulation∆V O(∆IO)V I = V O(nom) + 1 V, 1 mA ≤ I O ≤ 150 mA*——±1.5%V I = 7 V, 1 mA ≤ I O ≤ 150 mA*——±1.5%Dropout Voltage V I min - V OI O = 100 mA—75200mV Ground Terminal CurrentI GNDV I = V O(nom) + 1 V, I O = 1 mA —5565µA V I = V O(nom) + 1 V, I O = 150 mA*—5565µA V I = 7 V, I O = 1 mA —5565µA V I = 7 V, I O = 150 mA*—5565µA I QV I ≤ 7 V, V E ≤ 0.8 V, I O = 0 mA —— 1.0µA ENABLE Input VoltageV EH V I ≥ V O(nom) + 1 V, Output ON 2.0——V V ELV I ≥ V O(nom) + 1 V, Output OFF ——0.4V ENABLE Input Current I E V E = V I = 7 V——±1.0µA Internal Reference Voltage V REF — 1.26—V ADJUST Input Current I ADJ A8205SLH-ADJ only—0.10—µARejection RatioPSRRV I = V O(nom) + 1.5 V, V i = 100 mV,I O = 30 mA, f = 60 Hz—70—dB Output Noisee n10 Hz ≤ f ≤ 100 kHz, I O = 10 mA, C O = 10 µF —0.5—µV/√HzTypical values are at T A = +25°C and are given for circuit design information only.* Pulse test (≤20 ms). See previous page for duty cycle limitations.8205LOW-DROPOUTREGULATORS115 Northeast Cutoff, Box 15036Worcester, Massachusetts 01615-0036 (508) 853-5000APPLICATIONS INFORMATIONLinear regulators require input and output capacitors in order to maintain over-all loop stability. The recommended minimum value for the input capacitor is 0.1 µF. The output capacitor is the dominant pole that provides the high-frequency compensa-tion required for over-all regulator loop stability. These devices are stable with as little as 1 µF. However, to ensure stable operation under all conditions and capacitor types, the recom-mended minimum value is 4.7 µF. The output capacitor may be partially distributed through the load circuits. However, at least 1 µF should be connected at the regulator using the shortest and widest foil pattern possible.The A8205SLH-ADJ requires an external voltage divider to set up the desired regulated output voltage between 2.0 V and 6.8 V (V I ≤ 7 V). The two resistors are chosen such thatV O = 1.26 (R 1 + R 2)/R 2.The resistor values are usually as high as possible to maintain high circuit efficiency, but R 2 should be less than 300 k Ω.ENABLE(ACTIVE HIGH)INPUT (7.0 V MAX)Thermal ConsiderationsThese devices are intended to provide more than 150 mA of continuous current in a very small package. The table on page 2of this data sheet gives the maximum allowable average output current for a worst-case printed circuit design (R θJA = 220°C/W with a minimum footprint). Performance improvement is easily accomplished with the addition of 1 square inch of copper at terminal 2 (R θJA = 170°C/W).8205LOW-DROPOUTREGULATORSTHIS PAGE INTENTIONALLY LEFT BLANK8205LOW-DROPOUTREGULATORS115 Northeast Cutoff, Box 15036Worcester, Massachusetts 01615-0036 (508) 853-5000THIS PAGE INTENTIONALLY LEFT BLANK8205LOW-DROPOUT REGULATORSDimensions in Inches(for reference only)Dimensions in Millimeters(controlling dimensions)MINDwg. MA-011-5 mmNOTES: 1. Tolerances on package height and width represent allowable mold offsets.Dimensions given are measured at the widest point (parting line).2. Exact body and lead configuration at vendor’s option within limits shown.3. Height does not include mold gate flash.4. Where no tolerance is specified, dimension is nominal.MIN8205LOW-DROPOUTREGULATORS115 Northeast Cutoff, Box 15036Worcester, Massachusetts 01615-0036 (508) 853-5000The products described here are manufactured under one or more U.S. patents or U.S. patents pending.Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, ormanufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current.Allegro products are not authorized for use as critical components in life-support devices or systems without express written approval.The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsi-bility for its use; nor for any infringement of patents or other rights of third parties which may result from its use.。
AD8232 中文产品数据手册
ADI中文版数据手册是英文版数据手册的译文，敬请谅解翻译中可能存在的语言组织或翻译错误，ADI不对翻译中存在的差异或由此产生的错误负责。如需确认任何词语的准确性，请参考ADI提供 的最新英文版数据手册。
10866-001
AD8232 目录
特性................................................................................................... 1 应用................................................................................................... 1 功能框图 .......................................................................................... 1 概述................................................................................................... 1 修订历史 .......................................................................................... 2 技术规格 .......................................................................................... 3 绝对最大额定值............................................................................. 6 ESD警告...................................................................................... 6 引脚配置和功能描述 .................................................................... 7 典型工作特性 ................................................................................. 8 仪表放大器性能曲线............................................................... 8 运算放大器性能曲线............................................................. 11 右腿驱动(RLD)放大器性能曲线......................................... 14 基准电压缓冲器性能曲线 .................................................... 15 系统性能曲线 .......................................................................... 16 工作原理 ........................................................................................ 17 架构概览................................................................................... 17 仪表放大器 .............................................................................. 17 运算放大器 .............................................................................. 17 右腿驱动放大器...................................................................... 17 基准电压缓冲器...................................................................... 18 快速恢复电路 .......................................................................... 18 导联脱落检测 .......................................................................... 19 待机操作................................................................................... 19 输入保护................................................................................... 20 射频干扰(RFI) ......................................................................... 20 电源调整与旁路...................................................................... 20 折合到输入端的失调............................................................. 20 布局建议................................................................................... 20 应用信息 ........................................................................................ 21 消除电极失调 .......................................................................... 21 高通滤波................................................................................... 21 低通滤波和增益...................................................................... 23 驱动电极................................................................................... 23 应用电路 ........................................................................................ 24 心脏附近心率测量 ................................................................. 24 应用练习：在双手处测量心率 ........................................... 24 心脏监护仪配置...................................................................... 25 带运动伪像消除功能的便携式心脏监护仪 ..................... 25 封装和订购信息........................................................................... 27 外形尺寸................................................................................... 27 订购指南................................................................................... 27
DA12M中文资料
DA05LthruDA24CMST ANDARD CAP ACIT ANCE TVS ARRA YOnly One Name Means ProTek’Tion™APPLICA TIONS✔ Low Frequency I/O Ports✔ RS-232 & RS-423 Data Lines ✔ Power Bus Lines✔ Monitoring & Industrial Signal and Data Ports ✔ Microprocessor Based EquipmentIEC COMP A TIBILITY (EN61000-4)✔ 61000-4-2 (ESD): Air - 15kV , Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns✔ 61000-4-5 (Surge): 24A, 8/20µs Level 2 (Line-Ground) & Level 3 (Line-Line)FEA TURES✔ 800 Watts Peak Pulse Power per Line (tp=8/20µs)✔ Unidirectional & Bidirectional Configuration ✔ ESD Protection > 40 kilovolts ✔ Available in 5V , 12V , 15V & 24V ✔ Standard Dual-In-Line Package ✔ Protects 4 to 6 LinesMECHANICAL CHARACTERISTICS✔ Molded 8 Pin Dual-In-Line (DIP) Package ✔ Weight 0.55 grams (Approximate)✔ Flammability rating UL 94V-0✔ Packaging: 50 Pieces Per T ube✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package05002PIN CONFIGURA TIONSBIDIRECTIONAL DAxxCM SeriesDAxxCL SeriesDAxxM SeriesDAxL SeriesUNIDIRECTIONAL8 PIN DIPDEVICE CHARACTERISTICSMAXIMUM RATINGS @ 25°C Unless Otherwise SpecifiedOperating T emperature SYMBOL VALUE -55°C to 150°C°C °C -55°C to 150°C UNITS T J T STG PARAMETERStorage T emperaturePeak Pulse Power (t p = 8/20µs) - See Figure 1P PP 800Watts Forward Surge Rating (See Note 1)Amps10I FELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise SpecifiedPART NUMBER (See Notes 1 & 2)MINIMUM BREAKDOWN VOLTAGE@ 1mA V (BR)VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2)@ I P = 1AV C VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2)@8/20µs V C @ I PP TYPICAL CAPACITANCE@0V, 1 MHzC J pFDA05L DA12L DA15L DA24L DA05M DA12M DA15M DA24M DA05CL DA12CL DA15CL DA24CL DA05CM DA12CM DA15CM DA24CM6.013.316.726.76.013.316.726.76.013.316.726.76.013.316.726.712.526.033.052.112.526.033.052.112.526.033.052.112.526.033.052.124.6V @ 45A 32.9V @ 34A 37.7V @ 27A 48.5V @ 22A 24.6V @ 45A 32.9V @ 34A 37.7V @ 27A 48.5V @ 22A 24.6V @ 45A 32.9V @ 34A 37.7V @ 27A 48.5V @ 22A 24.6V @ 45A 32.9V @ 34A 37.7V @ 27A 48.5V @ 22A880440400275880440400275500385300200500385300200MAXIMUM LEAKAGE CURRENT@V WMI D µA 200222200222200222200222RATED ST AND-OFF VOLTAGEV WM VOLTS5.012.015.024.05.012.015.024.05.012.015.024.05.012.015.024.0Note 1: Unidirectional Only: V F = 1.5 Volts @ 10A, 300µs (square wave).Note 2: The “C ” suffix specifies a bidirectional device, such as DA05CM or DA12CL.GRAPHS0.1 1 10 100 1,000 10,000t d- Pulse Duration - µs101001,00010,000P P P - P e a k P u l s e P o w e r - W a t t sFIGURE 1PEAK PULSE POWER VS PULSE TIMET L - Lead T emperature - °C20406080100% O f R a t e d P o w e rFIGURE 3POWER DERATING CURVE0 5 10 15 20 25 30t - Time - µs20406080100120I P P - P e a k P u l s e C u r r e n t- % o f I P PFIGURE 2COPYRIGHT © ProTek Devices 2003SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC).DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer ’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products.P ACKAGE OUTLINE & DIMENSIONSProTek Devices2929 South Fair Lane, Tempe, AZ 85282Tel: 602-431-8101 Fax: 602-431-2288E-Mail: sales@ Web Site: 。
摩克斯DA-682A-DPP系列2U型机箱电脑说明书
DA-682A-DPP SeriesIntel®3rd Gen Core™CPU,IEC-61850,2U rackmount computer with2expansion slotsFeatures and Benefits•IEC61850-3,IEEE1613,and IEC60255compliant for power substationautomation systems•EN50121-4compliant for railway wayside applications•3rd Gen Intel®Core™processor(Ivy Bridge)•Built-in DDR3SDRAM and industrial DOM•6Gigabit Ethernet ports for network redundancy•2PCI expansion slots for expansion modules•1CompactFlash socket for storage expansion•4high-speed,system-bootable USB2.0ports•Supports dual power inputs:100to240VAC and100to240VDC•Optional IRIG-B expansion module availableCertificationsIntroductionThe DA-682A-DPP computers have an x86platform with VGA,6Gigabit Ethernet ports,CompactFlash,USB,and two PCI ports for DA Series expansion modules.The DA-682A-DPP comes with three different CPU options,and basic models that allow system designers to install the DOM, RAM,and operating system according to their specific requirements.IEC-61850-3and IEEE1613compliance helps ensure that the DA-682A-DPP can deliver stable and reliable system operations in power applications.Additional value and convenience are provided through a modular design with two independent slots for flexible system integration and ers have the option to add a variety of different communications modules,including an8-port RS-232/422/485module,8-port RS-422/485module,8-port10/100Mbps switch module,IRIG-B time synchronization card and a universal PCI expansion module.The DA-682A-DPP also complies with the IEC60255standards to enable the protection of electrical relays in a smart substation.IEC60255is one of the most widely used standards for testing relays and protection equipment,and compliance ensures that the DA-682A-DPP will work reliably and seamlessly with IEDs(intelligent electronic devices)as a part of the robust substation automation system.EN50121-4compliance confirms that the DA-682A-DPP can deliver stable and reliable system operations in rail applications.In station ISCS (Integrated Supervisory Control System)and wayside control and monitoring systems,a powerful front-end processor is needed for controlling the local SCADA and traction power relay house.The expandable serial interfaces and Gigabit Ethernet ports enable the integration of station subsystems,including AFC,PAS,PSD,and FAS,on a single platform.For wayside applications,you can also integrate disaster prevention,traction power,and signaling and safety systems to provide an integrated view of your smart rail setup.Smart Recovery FunctionThe DA-682A-DPP’s Smart Recovery function minimizes downtime by making it easy to recover from operating system crashes.Engineers who are experts in a particular vertical market may not have enough computer domain knowledge to know how to fix operating system problems.Moxa Smart Recovery™is an automated BIOS-level software recovery system that allows engineers to automatically trigger OS recovery to minimize downtime.Proactive Monitoring FunctionMoxa Proactive Monitoring is a small-footprint,resource-friendly,easy-to-use utility that allows users to track a number of system parameters. Users can view the current parameter values for these key parts by simply clicking on the icons corresponding to the parameters in the user er-defined key part indicators(KPIs)are used to monitor the computer’s key parts.Visible and/or audio alerts are triggered automatically via relay and SNMP traps when these KPIs exceed their preset threshold values,making it extremely convenient for operators to avoid system downtime by setting up predictive maintenance tasks well in advance.AppearanceFront ViewRear ViewSpecificationsComputerCPU DA-682A-C1-DPP Series:Intel®Celeron®Processor1047UE(2M Cache,1.40GHz)DA-682A-C3-DPP Series:Intel®Core™i3-3217UE Processor(3M Cache,1.6GHz)DA-682A-C7-DPP Series:Intel®Core™i7-3517UE Processor(4M Cache,up to2.80GHz)System Chipset Mobile Intel®HM65Express ChipsetGraphics Controller Intel®HD GraphicsSystem Memory Pre-installed DA-682A-DPP LX Series:1GB DDR3System Memory Slot SODIMM DDR3/DDR3L slot x1Supported OS Linux Debian7Windows Embedded Standard7(WS7P)32-bitWindows Embedded Standard7(WS7E)32-bitStorage Slot 2.5-inch HDD/SSD slots x2CF slots x1Storage Pre-installed DA-682A-DPP LX Series:2GB CompactFlashComputer InterfaceEthernet Ports Auto-sensing10/100/1000Mbps ports(RJ45connector)x6USB2.0USB2.0hosts x4,type-A connectorsExpansion Slots PCI slots x2Video Input VGA x1,15-pin D-sub connector(female)LED IndicatorsSystem Power x1Storage x1Programmable x8LAN2per port(10/100/1000Mbps)Power ParametersOperating Voltage100to240VDC,100to240VACPower Button Reset button(front panel)ON/OFF(rear panel)Power Consumption30W(max.)Physical CharacteristicsHousing MetalDimensions(without ears)440x315x90mm(17.32x12.40x3.54in) Weight6,500g(14.33lb)Installation19-inch rack mountingEnvironmental LimitsOperating Temperature-25to60°C(-13to140°F)Storage Temperature(package included)-40to80°C(-40to176°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsEMC EN61000-6-2/-6-4EMI CISPR32,FCC Part15B Class AEMS IEC61000-4-11DIPsIEC61000-4-2ESD:Contact:8kV;Air:15kVIEC61000-4-3RS:80MHz to1GHz:10V/mIEC61000-4-4EFT:Power:4kV;Signal:4kVIEC61000-4-5Surge:Power:4kV;Signal:4kVIEC61000-4-6CS:10VIEC61000-4-8PFMFPower Substation IEC61850-3,IEEE1613Railway EN50121-4Protection Relay IEC60255Safety EN60950-1,IEC60950-1,UL60950-1Shock IEC60870-2-2,IEC61850-3Edition1.0 Vibration IEC61850-3,IEC60870-2-2DeclarationGreen Product RoHS,CRoHS,WEEEMTBFTime360,807hrsStandards Telcordia SR332WarrantyWarranty Period3yearsDetails See /warrantyPackage ContentsDevice1x DA-682A-DPP Series computerInstallation Kit1x rack-mounting earDocumentation1x quick installation guide1x warranty cardNote This product requires additional modules(sold separately)to function. DimensionsOrdering InformationModel Name CPU DDR3RAMOS Storage(CompactFlash)Linux Debian732-bitPower Input100-240VAC/VDCOperating Temp.DA-682A-C1-DPP Celeron1047UE–––✓-25to60°C DA-682A-C1-DPP-LX Celeron1047UE1GB2GB✓✓-25to60°C DA-682A-C3-DPP i3-3217UE–––✓-25to60°C DA-682A-C3-DPP-LX i3-3217UE1GB2GB✓✓-25to60°C DA-682A-C7-DPP i7-3517UE–––✓-25to60°C DA-682A-C7-DPP-LX i7-3517UE1GB2GB✓✓-25to60°CAccessories(sold separately)Expansion ModulesDA-SP08-I-EMC4-DB8-port RS-232/422/485serial module with DB9connector and isolation;suitable for EMC Level4environmentsDA-SP08-I-EMC4-TB8-port RS-232/422/485serial module with terminal block connector and isolation;suitable for EMCLevel4environmentsDA-SP08-I-DB8-port RS-232/422/485serial module with a digitally isolated DB9connectorDA-SP08-DB8-port RS-232/422/485serial module with DB9connectorDA-SP08-I-TB8-port RS-422/485serial module with digitally isolated terminal blockDA-SP38-I-TB8-port RS-422/485serial module with digitally isolated terminal blockDA-SW08-RJ8-port10/100Mbps unmanaged switch moduleDA-LN04-RJ4-port10/100Mbps LAN moduleDA-UPCI-DK Universal PCI development kitDA-FX04-MM-ST-T4-port(100BaseFX)fiber LAN module with multi-mode,ST connector,supports IP Teaming Storage KitsDA-682A HDD Kit DA-682A HDD kitUSB Dongle KitsUSB Dongle Kit Internal USB dongle kit installation package©Moxa Inc.All rights reserved.Updated Feb21,2020.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。
mb89f202中文资料
敞末让开端没。没有有使使用用的的I/O输末入端末进端入会输引出起状误态动后作并和把锁其定敞，开造；成如永其久在性输损入害状，态故，请就用按2照kΩ输或入以末上端的的电处阻理上方拉法或处下理拉该末等端I/。O
• N.C. 管脚的处置
（转下页）
6
系列 MB89202
（承上页） 管脚编号
SH-DIP32*1 SSOP34*3
24-27 26-29
21-23 32 10
23-25 34 10
管脚名称
P40/AN0 |
P43/AN3 P70-P72
VCC VSS
16
17
C
, — 16 22 :*1 DIP-32P-M06 :*2 FPT-34P-M03
（转下页）
2
系列 MB89202
（承上页）
产品型号 参数
MB89202
MB89F202
MB89V201
10 位 A/D 转换器 1A通0/D过位转精8换/度1功6×位能8定(个时转通器换道时/ 计间数：器1输2.出16或µ时s/1基2.定5 时MH器z计) 数器连续激活
Wild 寄存器
位8 × 2
：有 ×：无
MB89202 ×
MB89F202 ×
MB89V201 × ×
■ 产品间的差异
• 存储器容量
使用评价产品进行评价之前， 请先确认其与实际使用产品的差异。
• 屏蔽选项
产品不同，可以选择的项目和指定选项的方法也不同。选择之前，请查阅 “■ 屏蔽选项”一览表。
3
系列 MB89202
■ 管脚图
P33/EC
15
N.C.
16
C
Moxa DA-682C系列产品说明书
P/N: 1802006821011 *1802006821011*DA-682C SeriesQuick Installation Guidex86 Rackmount Embedded ComputersVersion 1.0, February 2020Technical Support Contact Information/supportMoxa Americas:Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778 Moxa China (Shanghai office): Toll-free: 800-820-5036 Tel: +86-21-5258-9955 Fax: +86-21-5258-5505 Moxa Europe:Tel: +49-89-3 70 03 99-0 Fax: +49-89-3 70 03 99-99 Moxa Asia-Pacific:Tel: +886-2-8919-1230 Fax: +886-2-8919-1231 Moxa India:Tel: +91-80-4172-9088 Fax: +91-80-4132-10452020 Moxa Inc. All rights reserved.OverviewThe DA-682C Series is built around a Intel® Celeron, Intel® Core™ i3, i5 or i7 CPU and comes with dual display ports (2 x HDMI), 5 USB ports, 6 gigabit LAN ports, 2 3-in-1 RS-232/422/485 serial ports, 6 digital Input ports, and 2 digital output ports. The DA-682C is equipped with two hot-swappable 2.5” HDD/SSD slots and supports the Intel® RST RAID 0/1 functionality. Additional value and convenience are provided through a modular design with two independent slots for flexible system integration and expansion. Users have the option to add a variety of different communications modules, including an 8-port RS-232/422/485 module and 4-port 10/100/1000 Mbps LAN module.With IEC 61850-3 and IEEE 1613 compliance, the DA-682C is sure to deliver stable and reliable system operation for power applications. The DA-682C also complies with the IEC 60255 standards, which cover the protection of electrical relays in a smart substation. IEC 60255 is one of the most widely used standards for testing relays and protection equipment, and compliance with the standard ensures that the DA-682C will work reliably and seamlessly with IEDs as part of a robust substation automation system.Package ChecklistEach basic system model is shipped with the following standard items: •DA-682C rackmount computer•Rack-mounting kit•Quick Installation Guide•Warranty cardHardware InstallationFront ViewRear ViewConnecting the PowerThe DA-682C provides single or dual power inputs using a terminal block, which is located on the rear panel. Connect the power cord wires to the screws, and then tighten the screws. The Power LED will light up to indicate that power is being supplied to the DA-682C, after which the BIOS will initialize the flash disk module, causing the Storage LED to blink. It should take about 30 to 60 seconds for the operating system to complete the boot up process. A grounding connector is also provided for power surge protection.In addition, a power button on the rear panel allows users to power on the computer when it is in the sleep or hibernate mode.For detailed power connection and surge protection information, refer to the DA-682C Hardware User’s Manual . Front-panel LEDsThere are 60 LED indicators on the front panel. The LEDs are described in the following table: LED Color DescriptionPowerGreen Power is on OffNo power inputStorage Yellow/Blinking Data is being written to or read from the storage unit OffStorage unit is idlePower 1 Failure OffThe 1st power supply is on RedError in the 1st power supply Power 2 Failure OffThe 2nd power supply is on RedError in the 2nd power supply Gigabit LAN LEDs 1 to 6 Green 100 Mbps Ethernet modeOrange 1000 Mbps (Gigabit) Ethernet modeSerial Port P1/P2 (TX/RX)Green Tx: Serial data is being transmitted YellowRx: Serial data is being received Programmable LEDs 1 to 8 Green/ Blinking Can be used to indicate statuses or for debugging, as defined by users. Module LEDs 1 to 8 (Module A/Module B) Green/ Orange/Blinking Reserved for LAN-port and serial-port expansion cards.Connecting to DisplaysThe DA-682C comes with two HDMI interfaces on the rear panel, allowing users to connect two displaysNOTE For highly reliable video streaming, use premium certified HDMI cables.Connecting to a Keyboard and MouseConnectors for the keyboard and a mouse are located on the rear panel of the computer. Both connectors are PS/2 interfaces; you can directly connect a keyboard and a mouse using these connectors. Serial PortsThe DA-682C comes with two software-selectable RS-232/422/485 serial ports on the rear panel. The ports use terminal blocks. Refer to the following table for the pin assignments: Pin RS-232 RS-422 RS-485(4-wire) RS-485(2-wire)1 TxD TxD(+) TxD(+) –2 RxD TxD(-) TxD(-) –3 RTS RxD(+) RxD(+) Data(+)4 CTS RxD(-) RxD(-) Data(-)5 GND GND GND GNDUSB PortsThe DA-682C comes with two USB 2.0 ports on the front panel and three USB 3.0 ports on the rear panel. The USB ports can be used to connect peripherals, such as flash drives, to expand the systems storage capacity. Ethernet PortsThe DA-682C has 6 100/1000 Mbps RJ45 Ethernet ports on the rear panel. Refer to the following table for the pin assignments: Pin 100 Mbps1000 Mbps 1 Tx+TRD(0)+ 2Tx- TRD(0)- 3 Rx+ TRD(1)+ 4 – TRD(2)+ 5 – TRD(2)- 6 Rx- TRD(1)- 7 – TRD(3)+ 8–TRD(3)-Digital Inputs/Digital OutputsThe DA-682C comes with six digital inputs and two digital outputs in a terminal block. Refer to the following figures for the pin definitions and wiring methods.Relay OutputThe DA-682C provides a relayoutput located on the rear panel of the computer. Refer to the figure on the right for detailed pin definition of the relay output connectors.Installing Storage DisksThe DA-682C comes with two storage sockets, allowing users to install two disks for data storage. Unfasten the screw on the right side of the storage disk tray cover and pull down the cover. Slide out the tray to install the disks. Refer to the DA-682C Hardware User’s Manual for details.There are two slots for installing two SSD disks. The installation sequence of the disks is indicated in the diagram on the right.Installing Expansion ModulesThe DA-682C comes with two expansion module sockets on the rear panel. You can install Moxa’s LAN or serial connectivity expansion module using this socket. For additional details, refer to the DA-682C Hardware User’s。
中达电通 高功能 低噪音 迷你型交流电机驱动器 说明书
序言感謝您採用台達高功能‧迷你型交流電機驅動器 VFD-M系列。
VFD-M係採用高品質的元件、材料及融合最新的微電腦控制技術製造而成。
此產品說明提供給使用者安裝、參數設定、異常診斷、排除及日常維護交流電機驅動器相關注意事項。
為了確保能夠正確地安裝及操作交流電機驅動器，請在裝機之前，詳細閱讀本產品說明，並請妥善保存隨機附贈之光碟內容及交由該機器的使用者。
交流電機驅動器乃精密的電力電子產品，為了操作者及機械設備的安全，請務必交由專業的電機工程人員安裝試車及調整參數，本產品說明中有 [ 危險 ] 、 [ 注意 ] 等符號說明的地方請務必仔細研讀，若有任何疑慮的地方請連絡本公司各地的代理商咨詢，我們的專業人員會樂于為您服務。
以下各事項請使用者在操作本產品時特別留意本說明書中為了詳盡解說產品細部，會將外殼拿開或將安全遮蓋物拆解后，以圖文方式作為描述。
至于本產品在運轉中，務必依照規定裝好外殼及配線正確，參照說明書操作運行，確保安全。
說明書內文的圖示，為了方便說明事例，會與拿到產品稍有不同，但不會影響客戶權益。
由于產品精益求精，當內容規格有所修正時，請咨詢代理商或至台達網站( /industrialautomation/ )下載最新版本。
交流電機驅動器有時會簡稱為變頻器或是驅動器，若內文敘述有提及變頻器一詞，便是指交流電機驅動器。
目錄一、使用及安裝1-1 產品外觀………………………………………………………………………………………………1-2 1-2 產品安裝………………………………………………………………………………………………1-5 1-3 產品尺寸…………………………………………………………………………………….……….1-7 二、配線2-1 配線說明………………………………………………………………………………………………2-2 2-2 系統配線圖……………………………………………………………………………………………2-5 2-3 主回路端子說明………………………………………………………………………………………2-6 2-4 控制回路端子說明…………………………………………………………………………………..2-9三、簡易面板與運轉3-1 面板說明………………………………………………………………………………………………3-2 3-2 運轉方式……………………………………………………………………………………………..3-6 3-3 試運轉…………………………………………………………………………………………………3-7四、參數功能說明4-1參數功能一覽表…………………………………………………………………………………..……4-2 4-2 應用場合相關參數設定……………………………………………………………………………..4-10 4-3 參數功能詳細說明…………………………………………………………………………………..4-14五、異常診斷方式5-1 過電流OC…………………………………………………………………………………………..…5-2 5-2 對地短路故障GFF……………………………………………………………………………………5-3 5-3 過電壓OV……………………………………………………………………………………………..5-4 5-4 電壓不足Lv……………………………………………………………………………………………5-5 5-5 過熱OH………………………………………………………………………………………………..5-6 5-6 過載OL………………………………………………………………………………………………..5-7 5-7 數字操作器面板異常…………………………………………………………..…………………...5-8 5-8 電源欠相PHL…………………………………………………………………………………………5-9 5-9 電機無法運轉………………………………………………………………………………………5-10 5-10 電機速度無法變更………………………………………………………………………………..5-11 5-11 電機失速…………………………………………………………………………………………..5-12 5-12 電機異常…………………………………………………………………………………………..5-13 5-13 電磁雜音、感應雜音的對策……………………………………………………………………..5-145-14 設置的環境措施…………………………………………………………………………………..5-15 5-15 防止交流電機驅動器影響其他機器……………………………………………………………..5-16六、保護及檢查6-1 保護動作一覽表………………………………………………………………………………………6-2 6-2 定期維護檢查…………………………………………………………………………………………6-5附錄A 標準規格……………………………………………………………………………………………..…A-1附錄 B 配件選購B-1 剎車電阻選用一覽表…………………………………………………………………………………B-2 B-2無熔絲開關………………………………………………………………………………………….…B-5 B-3 電抗器…………………………………………………………………………………………………B-7 B-3-1 AC 電抗器……………………………………………………………………………………….B-7 B-3-2零相電抗器……………………………………………………………………………………….B-9 B-4 遠方操作盒RC-01…………………………………………………………………………….…..B-10 B-5通訊界面操作器PU06………………………………………………………………….…………B-11 B-6 EMI 濾波器………………………………………………………………………………….………B-13 B-7 Din Rail………………………………………………………………………………….…………...B-19附錄 C 選擇合適的交流電機驅動器C-1交流電機驅動器容量計算方式………………………………………………………………………C-2 C-2 選用交流電機驅動器注意事項……………………………………………………………………...C-4 C-3 電機選用……………………………………………………………………………………………...C-5一、使用及安裝1-1 產品外觀1-2 產品安裝1-3 產品尺寸客戶收到本產品時應是置于其包裝箱內。
d68产品说明书
4.6W双路音频功率放大器D6282概述外形图D6282是双路音频功率放大集成电路，内置温度过热保护电路、功率调整开关。
适用于便携式收录机作音频功率放大。
该电路采用12脚单列直插封装。
主要特点●输出功率大P OUT=2.5W/CH(典型)(Vcc=9V,R L=4Ω,f=1kHz,THD=10%)P OUT=4.6W/CH(典型)(Vcc=12V,R L=4Ω,f=1kHz,THD=10%)●开机噪音小；●静态电流小；I CCQ=19mA(典型) (Vcc=9V,V IN=0) FSIP12 ●软嵌位●内置热保护电路●最佳电源电压9V、12V●工作电源电压范围：Vcc=6~15V引出端功能符号极限值(Ta=25℃):电特性(若无特殊说明,Vcc=9V,f=1kHz,Rg=600Ω,R L=4Ω,Ta=25℃)管脚直流电压值（典型值）（Vcc=9V，Ta=25℃）* ③脚与VCC连接。
内部框图与测试应用电路图注：此电路在应用中可以不用耦合电容（C IN ），如果音量电位器产生的噪声大于此电路的输入失调电压，则需要使用耦合电容（C IN ）。
应用方法与说明1．电压增益的调节电压增益G V 是由图1中R1、R2与Rf 所决定的：G V =20log （（Rf+R1+R2）/（Rf+R1）） 当 Rf=0 G V =56dB （典型） 当 Rf=82Ω G V =45dB （典型）可以通过增加Rf 来减小增益，不过，由于增加 图1 反馈可能引起振荡，所以一般增益用在40dB 左右。
2．热保护电路内置热保护电路用于因散热不足而温度上升时防止电路损坏。
工作温度设成散热片的温度175℃（典型），达到或超过这个温度就关断内部偏置而防止电路损坏。
3．输入部分IC 输入电路如图2所示。
PNP 管Q1是为了保证在输入电路中无输入耦合电容时该电容也可正常使用。
由于在输入脚（6和7脚），最大将产生60mV 失调电压。
所以只有当音量电位器产生的噪声电压小于失调电压时才可去掉输入耦合电容。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Document Number: 42064For technical questions contact: aluminumcaps4@Revision: 23-May-0522782DAVishay SpragueAluminum Capacitors+ 85 °C, Snap-in, General PurposeFEATURES•Maximum CV•General purpose design •Wide voltage range•Molded cover available in 2 or 3 terminal design with standoffs•Replaces Type 82DQUICK REFERENCE DATADESCRIPTION VALUENominal case size ØD x L in mm 0.87” x 1.00” [22.0 x 25.0] to 1.57” x 3.18” [40.0 x 80.0]Operating temperature - 40 °C to + 85 °C Rated capacitance range, C R33 µF to 270 000 µFT olerance on C R± 20 %Rated voltage range, U R 6.3 WVDC to 500 WVDCT ermination Snap in Life validation test at 85 °C2000 hours: Δ CAP ≤ 15 % from initial measurement. Δ ESR ≤ 1.5 x initial specified limit. Δ DCL ≤ initial specifiedlimit Shelf life at 85 °C500 hours: Δ CAP ≤ 15 % from initial measurement. Δ ESR ≤ 1.3 x initial specified limit. Δ DCL ≤ 2 x initialspecified limit DC leakage current 5 minute charge timeI = K K = 4.0 at + 25 °CI in µA, C in µF, V in VoltsCVRIPPLE CURRENT MULTIPLIERSTEMPERATUREAMBIENT TEMPERATUREMULTIPLIERS+ 55 °C 2.0+ 65 °C1.7+ 75 °C 1.4+ 85 °C1.0FREQUENCY (Hz)WVDC 50-60300 - 10001000 AND UP16 - 490.85 1.10 1.1550 - 1990.83 1.15 1.20200 - 4000.801.301.40DIMENSIONS in inches [millimeters]CASECODE DIAMETER LENGTH STYLE 2 TYPICAL WEIGHT (Grams )CASE CODE DIAMETER LENGTH STYLE 2 TYPICAL WEIGHT (Grams )D + 0.04 - 0 [+ 1.0 - 0]L ± 0.08 [2.0] D + 0.04 - 0 [+ 1.0 - 0]L ± 0.08 [2.0]HA 0.87 [22.0] 1.00 [25.0]16.0MB 1.38 [35.0] 1.18 [30.0]48.0HB 0.87 [22.0] 1.18 [30.0]19.0MC 1.38 [35.0] 1.38 [35.0]54.0HD 0.87 [22.0] 1.57 [40.0]24.0MD 1.38 [35.0] 1.57 [40.0]61.0JA 1.00 [25.0] 1.00 [25.0]20.0ME 1.38 [35.0] 2.00 [50.0]74.0JB 1.00 [25.0] 1.18 [30.0]24.0 MF 1.38 [35.0] 2.50 [63.0]91.0JC 1.00 [25.0] 1.38 [35.0]27.0MG 1.38 [35.0] 3.18 [80.0]113.0JD 1.00 [25.0] 1.57 [40.0]31.0NA 1.58 [40.0] 1.00 [25.0]48.0JE 1.00 [25.0] 2.00 [50.0]38.0NB 1.58 [40.0] 1.18 [30.0]58.0KA 1.18 [30.0] 1.00 [25.0]30.0NC 1.58 [40.0] 1.38 [35.0]66.0KB 1.18 [30.0] 1.18 [30.0]35.0ND 1.58 [40.0] 1.57 [40.0]81.0KC 1.18 [30.0] 1.38 [35.0]39.0NE 1.58 [40.0] 2.00 [50.0]103.0KD 1.18 [30.0] 1.57 [40.0]44.0NF 1.58 [40.0] 2.50 [63.0]128.0KE1.18 [30.0]2.00 [50.0]53.0NG1.58 [40.0]3.18 [80.0]183.0Fig.1 Component Outlines. For technical questions contact: aluminumcaps4@Document Number: 42064228Revision: 23-May-0582DAVishay SpragueAluminum Capacitors+ 85 °C, Snap-in, General Purpose*Style A and B not available in 0.87” [22.0mm] diameter units.DIMENSIONS in inches [millimeters]CIRCUIT BOARD MOUNT TERMINAL DIMENSIONS *DIAMETER STYLE ASTYLE BD CASE CODEB RC R 1.00 [25.0]J 0.093 [2.4]0.301 [7.6]140 °N/A 1.18 [30.0]K 0.125 [3.2]0.363 [9.2]120 °0.391 [9.9]1.38 [35.0]M0.125 [3.2]0.458 [11.6]120 °0.458 [11.6]DIMENSIONS AND AVAILABLE FORMSStyle DDocument Number: 42064For technical questions contact: aluminumcaps4@Revision: 23-May-0522982DAAluminum Capacitors+ 85 °C, Snap-in, General PurposeVishay SpragueORDERING EXAMPLE*Electrolytic capacitor 82DA series 82DA 123 M 6R3 HA 2 D*Note: For lead (Pb)-free, add suffix E3 to part number.Example: 82DAM6R3HA2DE3ELECTRICAL DATASYMBOLDESCRIPTIONµF rated capacitance± %M = ± 20 %DC voltage rating at 85° CHA see dimensions in millimeters table 2PVC insulating sleeve D2 pin snap-inNote: Other ratings and voltages available on special order.ELECTRICAL DATA AND ORDERING INFORMATIONCAPACITANCE(µF)PART NUMBER NOMINAL CASE SIZED X LMAX. ESR at 25 °C (m Ω)MAX. RIPPLE at + 85 °C (A)120 H Z 20 k - 40 kH Z120 H Z 20 k - 40 kH Z16 WVDC at + 85 °C, SURGE = 20 V15000.082DA153M016KA2D 1.181 x 0.984 [30.0 x 25.0]67.754.03.07 3.4725 WVDC at + 85 °C, SURGE = 30 V6800.082DA682M025HB2D 0.866 x 1.181 [22.0 x 30.0]73.556.1 2.57 2.946800.082DA682M025JA2D 0.984 x 0.984 [25.0 x 25.0]83.860.0 2.48 2.9310000.082DA103M025KA2D 1.181 x 0.984 [30.0 x 25.0]71.054.03.00 3.4735 WVDC at + 85 °C, SURGE = 40 V2700.082DA272M035HA2D 0.866 x 0.984 [22.0 x 25.0]120.087.4 1.91 2.244700.082DA472M035JA2D 0.984 x 0.984 [25.0 x 25.0]89.062.0 2.42 2.866800.082DA682M035KA2D 1.181 x 0.984 [30.0 x 25.0]75.0540.0 2.92 3.4210000.082DA103M035KB2D 1.181 x 1.181 [30.0 x 30.0]57.041.03.604.2050 WVDC at + 85 °C, SURGE = 63 V2200.082DA222M050HA2D 0.866 x 0.984 [22.0 x 25.0]115.076.0 1.94 2.393300.082DA332M050HB2D 0.866 x 1.181 [22.0 x 30.0]86.057.0 2.38 2.926800.082DA682M050JD2D 0.984 x 1.575 [25.0 x 40.0]47.031.03.914.96200 WVDC at + 85 °C, SURGE = 250V330.082DA331M200JB2D 0.984 x 1.181 [25.0 x 30.0]401.0191.0 1.28 1.86820.082DA821M200KD2D 1.181 x 1.575 [30.0 x 40.0]180.087.0 2.36 3.411000.082DA102M200KE2D 1.181 x 1.969 [30.0 x 50.0]142.067.0 2.89 4.221200.082DA122M200MD2D 1.378 x 1.575 [35.0 x 40.0]147.074.02.89 4.06250 WVDC at + 85 °C, SURGE = 300V220.082DA221M250HD2D0.866 x 1.575 [22.0 x 40.0] 558.0 166.0 1.122.12。