MY1B10G-100A资料下载
WBB-10微机厂用变压器保护装置说明书
不大于 25W 不大于 0.5VA/Φ 不大于 0.8VA/Φ
2.2 主要技术性能指标
2.2.1 定值整定范围 a) 电流整定范围 b) 电压整定范围 c) 时间整定范围 注：In 为额定值,下同 2.2.2 整定误差 a) 电流及电压整定值误差不超过±3% b) 时间整定值平均误差不超过±30ms 2.2.3 整组动作时间 瞬动段在 1.2 倍整定值时测量,不大于 40ms 2.2.4 暂态超越 电流各段及零序电流各段的暂态超越不大于 5% 0.1In～20In 0.5V～200V 0～100s
…………………………………….32 …………………………………….33 ………………………………………….34 ………………………………………….35
附图 8.3：WBB-10C 型保护装置背板端子图 附图 9：WBB-10 系列保护装置保护原理方框图
………………………………………….36 ………………………………………….37
使用说明书
…………………………………………………………………………………..
一、 人机对话操作说明 ………………………………………………………………….... 1.1 键盘的基本功能 ……………………………………………………………………... 1.2 菜单说明 ……………………………………………………………………………… 1.3 保护定值的操作 ………………………………………………………………………. 1.4 开出传动 ……………………………………………………………………………… 1.5 保护软压板投切 ………………………………………………………………………. 1.6 保护装置输出信息说明 ……………………………………………………………… 二、装置安装调试说明 ……………………………………………………………………. 2.1 装置通电前检查 ………………………………………………………………………. 2.2 电源检查 ……………………………………………………………………………… 2.3 绝缘检查 …………………………………………………………………………….... 2.4 检查 CPU 及 MMI 软件版本号 ………………………………………………………... 2.5 开入量检查 …………………………………………………………………………... 2.7 零漂及有效值检查 …………………………………………………………………. 2.8 定值输入及保护压板投入 …………………………………………………………... 2.9 装置的模拟试验 ……………………………………………………………………... 三、装置的维护运行 ………………………………………………………………………. 3.1 装置的投运 …………………………………………………………………………... 3.2 装置的运行 ……………………………………………………………………………. 3.3 保护动作报告及信号 ………………………………………………………………... 3.4 其它 ……………………………………………………………………………………. 四、维修指南 ………………………………………………………………………………. 五、贮存 ………………………………………………………………………………. …… 附录一、WBB－10 系列变压器保护装置事件代码表(27H) ………………………………. 附录二、WBB－10 系列变压器保护装置告警代码表 ……………………………………. 附录三、WBB－10C 变压器保护装置远动报文汇总 ………………………………………. 附图 1.1：WBB-10A、C 型保护装置面板布置图 附图 1.2：WBB-10B 型保护装置面板布置图 附图 2：WBB-10 系列保护装置屏面安装开孔尺寸图 附图 3：WBB-10 系列保护装置插件布置图 ……………………….…………………27 …………………………….……………27 …………………………………….28
M-100 用户手册说明书
M-100 USER’S MANUALRESEARCH, INNOVATE, CREATE“Whenever I speak about my company I speak with the passion we have. Located in the Paris region of France, I have ensured that Micromega has the best ele-ments of my industrial group at their availability. In an age where music is dematerializing, we are committed to staying at the forefront of technology and growing under our ‘made in France’ banner.The M-one programme, with its incredible audio quality, technical capacity and sleek design represents a major advance in the history of our company. The result of three years of research by our team, we are proud to introduce to you what we believe is the most effective and complete integrated stereo amplifier of its kind.Micromega is synonymous with technological advances, expertise, reliability and sound clarity. All of our products reflect these demands.”Didier HAMDI, CEO MicromegaThe advantages of the M-One amplifier series :• High quality, A/B class amplification• Resonant power supply• Symmetrical design• Asahi Kasei AK4490 DAC converter• Acoustic correction in situ using Room EQ1 and EQ2 (included or as an op-tion)• Binaural processing of the headphone output (included or as an option)• Cover and remote control machined from aluminium block• Android and iOS compatible control app (October 2016)1 - OVERVIEW (4)1.1 Front and top (4)1.2 Back (5)1.3 Sides (ventilation) (6)1.4 Bottom (7)1.5 Infrared remote control (8)2 - CONNECTIONS (9)2.1 Phono input for a vinly turntable (9)2.2 RCA line input (10)2.3 Balanced XLR analogue input (11)2.4 Coaxial digital input (12)2.5 Optical digital input (13)2.6 AES-EBU input (14)2.7 USB input (Type B) (15)2.8 Bluetooth aptX connection (16)2.9 I²S input ..................................................................................................182.10 LAN connection .. (19)2.11 Speaker connections (20)2.12 Connecting headphones (21)2.13 Subwoofer output (22)2.14 Pre-out (23)2.15 Trigger sockets (24)2.16 Mains power supply (25)2.17 Fuse (26)3 - USER GUIDE (27)3.1 Starting up (27)3.2 Choosing your source (28)3.3 Ajusting the balance (29)3.4 A justing sensitivity (30)3.5 Renaming the sources (31)3.6 Updating the M-100 (32)3.7 Updating the network module .................................................... (33)4 - SPECIFICATIONS (34)1.1 Front and topThe M-100 amplifier has two displays so that it can be controlled from any position. The displays will automatically adjust to whichever position the amplifier is in (e.g. flat, attached to wall).There is a headphone socket on the front so that you can listen to your music in complete peace. A “Binaural” process (as an option) allows you to re-create the 3D sound scene through the headphones which is lost in classic stereophonic recordings.On the top of the device are 4 buttons which you can use to adjust the reactions of your amplifier (see section 3.1 for more information).Carefully check that the packaging is intact. If you feel it may have been tampered with or damaged please contact your vendor.Carefully remove your device from the packaging. Store the packaging in a secure, dry place: if you need to return your device to the vendor you will require the original packaging.1. Overview1.2 BACKLine level inputa n a l o gi n p u t s d i g i t a li n pu t s a n a l o gi n p u t s tri g g e rTurntableinput ROOM EQ mic plugBalanced inputCoaxial input AES - EBU inputOptical inputUSB inputI²S inputsLAN input USB update inputLeft binding postPre-outSub-outRight binding postFuseMains power supply Trigger1.3 Sides (ventilation)The M-100 amplifier should be positioned so that it can receive sufficient ventilation. Do not obstruct the air vents on the side of your amplifier. You should leave at least 10cm of space around the air vents.We advise against placing the M-100 inside a closed furniture or space1.4 BottomYou will find a connection guide under your M-100 amplifier which illustrates all of the input and ouput terminals available. Do not try to open the M-100It contains potentiallylife-threatening high voltageTake note that the M-100 has spiked feets. It can harm your furniture. Use the included rubber pads to avoid damage.1.5Infrared remote controlON / OFF MuteChange display sizeAjust volumeInput selector« Bluetooth Connect »- Press and release : pairing will start- Press and hold (for 10 seconds then release) : clear Bluetooth memory2.1 Phono input for a vinyl turntableThe « PHONO » input on the M-100 amplifier is compatible with MM and MC cartridges.You can select the correct cartridge for your turntable using the switch located on the back of the amplifier.• If your turntable has an MM cartridge, you should place the switch in the MM position •If your turntable has an MC cartridge, you should place the switch in the MC positionThere is a ‘GND’ grounding terminal near the Phono plugs so that you can connect the grounding terminal of your record player if necessary.Phono input2. CONNECTIONSMM MC2.2 RCA line inputThe M-100’s « LINE » input can be used to connect any device with RCA analogue output.RCA lineinput2.3 Balanced XLR analogue inputThe M-100’s « BALANCED» input can be used to connect any device with symmetrical analogue output.Balanced XLRanalogue input2.4 Coaxial digital inputThe M-100’s « COAX » input can be used to connect any device with an SPDIF coaxial output.The signal should be a PCM stereo signal up to 32bit/768kHz.Coaxial Digital inputYOUR BLU-RAY OR DVD PLAYER MUST BE CONFIGURED IN PCM ON THE AUDIO OUTPUTOTHERWISE IT COULD PRODUCE AN INTENSE NOISE IN YOUR SPEAKERS AND DAMAGE THEM2.5 Optical digital inputThe M-100’s « OPTO » input can be used to connect any device with a TOSlink digital connection.The signal should be a PCM stereo signal up to 24bit/192kHzOptical digital inputYOUR BLU-RAY OR DVD PLAYER MUST BE CONFIGURED IN PCM ON THE AUDIO OUTPUTOTHERWISE IT COULD PRODUCE AN INTENSE NOISE IN YOUR SPEAKERS AND DAMAGE THEM2.6 AES-EBU InputThe M-100’s « AES » input can be used to connect any device with an AES-EBU connection on XLR. The signal should be a PCM stereo signal up to 32bit/768kHz.AES - EBU input2.7 USB Input (Type B)The M-100’s « USB » input can be used to connect any computer with a USB port.The signal should be a PCM stereo signal up to 32bit/768kHz or DSD/DSD-DoP up to 11.2MHz.A USB driver will be required for any computer using Windows. You can download the driver from the M-One page on the Microme-ga website.For computers using OS X or macOS you will not need an additional driver.USB input2.8 Bluetooth® aptX® connectionThe M-100’s « BT » connection can be used to wirelessly connect smartphones, tablets, computers or MP3 players with Bluetooth®. The Bluetooth® link is compatible with aptX® for the best sound quality. To make this manual easier to read, the term « Smartphone » will be used in this section to mean smartphones, tablets, computers and MP3 players. To connect via Bluetooth® for the first time:• Ensure that the Bluetooth® function on your smartphone is turned on.• Use the remote control to click on the ‘BT’ button.• You should see the « M-ONE » appear on the list of Bluetooth® connections available on your smartphone. To establish a connection select the « M-ONE ».• Launch music on your smartphone.To connect via Bluetooth® with a different smartphone, tablet etc.• Ensure that the Bluetooth® function on your smartphone is turned on.• Use the remote control to click on the ‘BT’ button.• Then press release the « BTC » button on the remote control.• You should see the « M-ONE » appear on the list of Bluetooth® connections available on your smartphone. To establish a connection select the « M-ONE ».• Launch play on your smartphone.The following time you select the BT input :• If the Bluetooth® on your smartphone is turned on, the connection will work automatically once you select the ‘BT’ button on the amplifier using the remote.NB : Bluetooth® is a « point to point » connection. This means that if a tablet is already connected to the amplifier, you will not be able to connect your smartphone at the same time. You will need to disconnect your tablet from the amplifier before connecting your smartphone.2.9 I²S InputThe M-100’s « I²S » inputs are ONLY TO BE USED with future Micromega products.Only for use with MICROMEGA productsI²S input2.10 LAN ConnectionThe M-100 can receive music via its network socket (LAN). In order to do this you must connect an Ethernet cable between your modem/router (Internet box) and the M-ONE.You should use DLNA/UPnP compatible software (e.g. JRiver) on your computer to send music to the M-One.LAN input2.11 Speaker connectionsThe amplifier’s terminal block is compatible with naked cables, banana plugs and fork plugs.Naked cables : reveal approx. 10mm of naked cable. Unscrew the terminal block until there is a gap and insert the cable. Screw the block back into placeBanana plugs : once you have attached the banana plugs to the cable, insert the plug into the centre of the terminal.Fork plugs : once you have attached the fork plugs to the cable, unscrew the terminal block until there is space to insert each fork plug. Screw the block back into placeRight speakerLeft speaker2.12 Connecting headphones at the front of the amplifierYou can connect headphones at the front of the amplifier using a 3.5mm mini-jack. If your headphones have a 6.35mm jack then you will need to use an adapter.Once headphones are connected to the front the speakers are rendered inactive. The headphone and speaker volume controls are separate and memorised independently.This headphone terminal is compatible with the « binaural » process which is available as an option. Micromega has researched HTRF (Head Related Transfer Function) in order to reproduce the original sound scene (in front of you).2.13 Subwoofer outputSortie sub-outYou can connect a Subwoofer to the RCA Sub-Out input. This input has a low pass filter with a limiting frequency of 400 Hz.You should control the cutoff frequency and the volume using the control panel on your subwoofer.2.14 Pre-out line outIf you are using an external power amplifier, please use XLR cables to connect it to the Pre-out terminals. The volume of the Pre-Out terminals is variable and follows the volume indicated on your M-100 amplifier.Pre-out2.15 Trigger socketsTrigger sockets enable the use of the amplifier as part of a home automation system.Trigger IN : Can be used with control voltages from 5 to 12V. The amplifier turns on when this voltage is running through it and off when it isn’t.Trigger OUT : When the amplifier is turned on there are 5V running through the Trigger OUT terminal.TriggerINTriggerOUTUse 3.5 mm mono mini-jack sockets2.16 Mains power supplyMain power supplyWe recommend you connect all of your music sources and speakers before connecting the power e the power cable supplied with your amplifier.Check that the mains supply on the label (packaging or underneath the device)matches the mains supply in situ.2.17 FuseIf you are having electrical problems you may need to change the fuse. Please replace it with an identical fuse to the one originally supplied.Use a flat screwdriver to unscrew the fuse holder.If after changing the fuse, it blows again, please contact your vendor.Fuse3. User Guide3.1 Starting upOnce you have attached all of your music sources, spea-kers and the power supply you can turn it on:• Press and release the red ‘STBY’ button on theremote whilst aiming it at the amplifier.• Press the button on the top left of the amplifier.• Red light will turn off on the productAfter a few seconds you should see the ‘Micromega’logo appear on the displays.To turn off your amplifier, use the same process.ON / Standby3.2 Choosing your sourceUSBAES<OKThe main display (fig. 1) shows which input is active (USB), the volume (20) and any specifications of the input signal (only for digital signals).To change the input source, press on the button at the bottom left.A list of sources will now appear in place of the volume (fig. 2).By using the up and down arrows you can select the desired source and confirm using the « OK » button.If you change your mind and don’t want to change the source, press the top left button ( « < » ) to return to the main display.Fig. 1Fig. 2Point the infrared remote control at the device and use it to select your music source.You can use the buttons at the top of the amplifier to do this if you prefer.USB20192 kHz3.3 Adjusting the balanceUSBBAL<OKFig. 1Fig. 2Adjusting the balance enables you to compensate for any dissymmetry in the two speakers related to your listening position. The volume can be adjusted to be louder on one side than the other (6dB on each side).Adjusting the balance effects all sources.From the main display (fig. 1), press on the button at the bottom left.Scroll through the list until ‘BAL ’ (fig. 2) appears and confirm with ‘OK’A balance screen appears where you can make adjustments. You can confirm any adjustments by selecting ‘OK’ or cancel them using ‘<’.symbolise there is an active balance setting (here to the right)3.4 Adjusting sensitivityFig. 1Fig. 2Adjusting sensitivity enables you to compensate for a signal level difference between your sources (+ or - 6 dB).This adjustment is particular to each input. You should be connected to the source you wish to adjust before starting (in this example we are adjusting the LINE terminal).From the main display (fig. 1), press on the button at the bottom left.Scroll through the list until ‘SENS’ (fig. 2) appears and confirm with ‘OK’A sensitivity screen appears where you can make adjust-ments. You can confirm any adjustments by selecting ‘OK’ or cancel them using ‘<’.SENS<OKsymbolise there is an active sensitivity setting (here, sensitivity is lowered)LINE3.5 Renaming the sources20Fig. 1Fig. 2For certain terminals (AES, OPTO, COAX, LINE, XLR) you can select from a predefined list of names.From the main display (fig. 1), press on the button at the bottom left.Scroll through the list until ‘NAME’ (fig. 2) appears and confirm with ‘OK’Scroll through the list of predefined names and choose the name which you feel suits your source best.You can confirm any adjustments by selecting ‘OK’ or cancel them using ‘<’.NAME<OKLINELINENB: Renaming of all inputs can be done through the Micromega app3.6 Updating the M-100Fig. 1Fig. 2Download the .zip folder which contains updates files on the M-One page of our website: Instructions for updates :- Extract the downloaded .zip on your computer- Copy « M-ONE-Vxx.img » onto a USB key (formatted in FAT)- Turn off your M-100 and disconnect it from the mains. - Insert the USB key 1 into port 1 at the back of the M-100- Reconnect the mains, the update will start (fig.1)- A few moments later, an ‘update completed’ message will appear (fig.2)-Disconnect the mains, take out the USB key and reconnect the mains.Micromega M-one software update USB drive found update file found Update completed.Switch off M-one and remove USB drive.NB : If a update is available, you should update to get the most out of your device.3.7 Updating the network module Download the .zip folder which contains updates files on theM-One page of our website: Instructions for updates :- Extract the downloaded .zip on your computer- On your M-One : go to INFO menu (fig. 1) and take note ofthe IP adress written on the second page (fig. 2)If the IP adress is shown as « 000.000.000.000 », download the mobile application (available on Google Play & App Store). This app will list all the connected devices on your network. You must look the IP adress for « Audio Renderer» or «Micromega M-One». - On your computer : write your IP adress in your browser navigation bar- Follow the instructions to update the network module. Select the « NMR-Vxx.bin » file and validate- The network module may take several minutes before rebootingFig. 1Fig. 2<OKINFO MCU FW 0023Serial number<OKINFO nmrs-eng-efs-v1.11.1.8IP 001 .000 .000 .2034. SpecificationsAmplifier sizeWidth : 430 mm Depth : 350 mmHeight (with spikes) : 56 mmAmplifier weight Net weight : 9 kgGross weight : 10,7 kgPackaging (overbox)Width : 735 mm Depth : 600 mm Height : 150 mmPackaging (box)Width : 685 mm Depth : 542 mm Height : 85 mmPower Consumption Standby : 1W 2 channels -1/8 Pmax under 8 Ohms : 140WRated output power P RMS under 8 Ohms : 2*100W P RMS under 4 Ohms : 2*200WSignal to noise ratio Digital input : 106 dB(A)Balanced analog input : 103 dB(A)Unbalanced analog input : 100 dB(A)Phono MM input : Higher than 75 dB(A)Speaker output residual noise, open inputµV160 : under8OhmsµV200 4: under OhmsOutput impedance @250Hz under 8 Ohms 15mΩ500à Damping factor Sup.Total harmony distorsionTHD, 8 Ohms, 63 Hz : under 0,001% THD, 8 Ohms, 1 kHz : under 0,005% THD, 8 Ohms, 10 kHz : under 0,05% THD, 4 Ohms, 63 Hz : under 0,001% THD, 4 Ohms, 1 kHz : under 0,01% THD, 4 Ohms, 10 kHz : under 0,07%Intermodulation distorsion - SMPTEIMD, from 1W to P NOM, 8 Ohms under 0,01% IMD, from 1W to P NOM, 4 Ohms under 0,02%Intermodulation distorsion - DynamicDIM 30, 50W, 8 Ohms under 0,02% DIM 30, 100W, 4 Ohms under 0,05%Channels separation96dBH z under Crosstalk,1k80dBH z under10kCrosstalk,Analog input sensitivityPhono MM, 47 kOhms 12 mVRMS Phono MC, 110 Ohms 1,2 mVRMSVRMS 1,4 Analogue:VRMS 1,7 :BalancedSub-out outputH z400:frequencyCut-offAUDIS MICROMEGA13-15 rue du 8 Mai 194594470 Boissy-Saint-LégerFRANCE parisFRANCE01.02.03.04.05*********************/micromegahifi。
101B操作说明书
说明非常感谢您使用鹰眼电子科技有限公司的CO B—E201A系列产品，在安装、操作、维修或检查本产品之前请务必要彻底阅读本说明书。
本手册内容和规格可能会根据机器版本（包括硬件和软件）而更变，恕不另行通知。
未经鹰眼电子科技有限公司许可，本手册任何部分都不可以任何形式或者通过电子或机械方法复制。
目录1．安全措施- - - - - - - - - - - - - - - - - - - - - - 3 -2．界面操作- - - - - - - - - - - - - - - - - - - - - - 4 –2-1. 主界面操作- - - - - - - - - - - - - - - - - - - - - 4 –2-2. 参数设定面板- - - - - - - - - - - - - - - - - - - - 4 –2-3. 运动控制面板- - - - - - - - - - - - - - - - - - - - 12 –2-4. 界面调试操作- - - - - - - - - - - - - - - - - - - - 13 –3.控制面板介绍- - - - - - - - - - - - - - - - - - - - - - 16 –3-1．电源控制面板- - - - - - - - - - - - - - - - - - - - 16 –3-2. 点胶快捷键面板介绍- - - - - - - - - - - - - - - - - 17 –3-3．参数控制面板- - - - - - - - - - - - - - - - - - - - - 17 –3-3-1．气路系统- - - - - - - - - - - - - - - - - - - - - - 18 –3-3-2. 温控系统- - - - - - - - - - - - - - - - - - - - - 18 –备注：设备易损件及其使用寿命- - - - - - - - - - - - - - - 19 –4.常见故障及其排除方法- - - - - - - - - - - - - - - - - - 20 –5.机台的保养方法- - - - - - - - - - - - - - - - - - - - - 21 –6．相对应标准件清单- - - - - - - - - - - - - - - - - - - - 22 –7．整机检修问题备忘录- - - - - - - - - - - - - - - - - - - 24 -1．安全措施1-1.机器搬运及安装注意事项：1.由于机器比较重,建议在搬运时要由4人以上进行。
10CKE1中文资料
Switch with IEC Connector Compact SizeTwo function power entry module combining a DPST switch and an IEC 320 power line connector. Compact packaging allows a smaller panel cutout with choice of snap-in orflange mounting. Available with general purpose filtering (F models - CFS, CFE), medical application filtering (H models -CHS, CHE) or unfiltered (CS, CE). Terminals allow for easy connection to any wiring scheme. Preconnected terminals from line to switch are available (B Models - CBS, CBE) for reducing OEM wiring time.The medical versions (H models) are designed specifically for health care applications. Their extremely low leakage current allows compliance with UL544 and UL2601 as well as CSA22.2 health care specifications for use with both patient and non-patient care equipment. For more information on UL544 or UL2601, see Appendix C.Note: When using the models with an IEC connector, remember that the leakage current of the companion line cord, GA400, is more significant than that of the filter -which may disqualify this line cord from use in patient care applications. SpecificationsMaximum leakage current, each line to ground: †F Models H Models@120 VAC 60 Hz:.25 mA 2 µA @250 VAC 50 Hz:.40 mA5µA Hipot rating (one minute):line-to-ground2250 VDC line-to-line1450 VDC Operating frequency: 50/60 HzRated voltage:250 VACOperating voltages:115/230 VACSwitch:Double-insulated ratedfor 10,000 operationsat full load.Amp inrush capability. Unfiltered Push-on Force: 18 lb/80 N Minimum insertion loss in dB:Line-to-ground in 50 ohm circuitCurrent Frequency MHzRating0.050.150.5151030 F Models1A10264648464746 3A8163236434850 6A4112227364150 10A141418273342 H Models1A16213744262110 3A9143132262414 6A4102223191813 10A26101511119 Line-to-line in 50 ohm circuitCurrent FrequencyMHzRating0.050.150.5151030 F Models1A131328626742 3A261423656567 6A261427464858 10A171423424462 H Models1A161329384226 3A151022363436 6A151420313337 10A141119323738110C SeriesC SeriesUL RecognizedCSA CertifiedVDE Approved CFS CSElectrical SchematicsResistor location for reference only.F Models (CFS, CFE)H Models (CHS, CHE)LINE LOADLINE LOADB Models (CBS, CBE)Note 1: Jumpers provided on CBS and CBE versions only.Note 2: Location of optional filterNote 1Note 1Note 2Note 2†Applies to Filtered models only.Case Dimensions±.006±.006±.006Part No.(max)(max)(max)±.152±.152±.152CS, CBS 1.23.97 1.62 1.06 1.54—31.2424.6441.1726.9239.12CE, CBE 1.74.97 1.62 1.06 1.54 1.41744.224.6441.1726.9239.1236.0CFS, CHS 1.232.53 1.62 1.12 1.54—31.2464.2641.1728.539.12CFE, CHE 1.742.53 1.62 1.12 1.54 1.41744.264.2641.1728.539.1236.0Switch with IEC Connector Compact Size (Continued)111Power Entry ModulesC Series.2115.36CS, CBS *CFS, CHSCE, CBE *CFE, CHE*CBS, CBE Pre-Connected Terminals.2115.36.2115.36.211CBS Rear View CBE Rear ViewCBS, CBE Side View Part Numbers010CS1010CE101CHS101CHE101CFS101CFE103CHS103CHE103CFS103CFE106CHS106CHE106CFS106CFE110CHS110CHE110CFS110CFE110CBS110CBE1Recommended Panel Cutoutmax Panel Cutout for thickness of .031-.098[.8-2.5]. Not recommended for plastic panels. For snap-in applica-tions, the D sides of the cutout must have a .02 [.508]radius on the instal-lation side. Snap-in models allow front mounting only.Typical Dimensions:Mounting Holes: .13 [3.3]Dia. (2) with .23 Dia. x 90˚ Counter sunk Terminals: .250 [6.35](3)Holes: .07 [1.8]Dia.Case Styles。
MY-EG100用户手册
MY-EG100用户手册目录1 基本知识.................................................................. 错误!未定义书签。
1.1 简介 ................................................................错误!未定义书签。
1.1.1 安全须知 ........................................................错误!未定义书签。
1.2 安全警告和注意事项.....................................错误!未定义书签。
1.2.1 通用注意事项...................................错误!未定义书签。
1.2.2 使用手机的注意事项.......................错误!未定义书签。
1.2.3 使用电池的注意事项.......................错误!未定义书签。
1.2.4 使用充电器的注意事项...................错误!未定义书签。
1.2.5 清洁和维护.......................................错误!未定义书签。
2 使用前...................................................................... 错误!未定义书签。
2.1 各部分的名称和说明.....................................错误!未定义书签。
2.1.1 技术参数...........................................错误!未定义书签。
2.1.2 外观示意图(图片仅供参考) ............错误!未定义书签。
DPXBNE-A106-33S-00中文资料
MIL-C-81659 DPXNA/DPXNEHow to OrderCannon's DPXNA (non-environmental, Type IV) and DPXNE (environmental, Types II and III) rack and panel connectors are designed to meet or exceed the requirements of MIL-C-81659, Revision B. They are used in military and aerospace applications and computer periphery equipment requirements, andare designed to operate in temperatures ranging from - 65˚C to + 125˚C. DPXNA/NE connectors are available in single, 2, 3, and 4 gang config-urations, with a total of 12 contact arrangements accommodation contact sizes 12, 16, 20 and 22,and combination standard and coaxial contacts.Contact retention of these crimp snap-in contacts is provided by the LITTLE CAESAR® rear release contact retention assembly. Environmental sealing is accomplished by wire sealing grommets and interfacial seals.SERIES PREFIXDPX - ITT Cannon Designation SHEL STYLEB - ARINC 'B' ShellCLASS (MIL-C-81659B, Class 1)....NA - Non - Environmental (MIL-C-81659B, Type IV) NE - Environmental (Mil-C-81659B, Types II and III)In the 3 and 4 gang assemblies, the insert desig-nation number represents cumulative (total) con-tacts. The charts on page 26 denote shell cavity location by layout. (If desired arrangement location is not defined, please consult or local sales engineering office.)See page 31- 00- 01- 02- 03- 17- 22- 23- 29- 30- 33- 37- 39'33' for Plug; '34' for Receptacle'P' for Pin (Standard on '34' receptacle except A106 layout which has reversed contact sex)'S' for Socket (Standard on '33' plug except A106layout which has reversed contact sex)StandardStandard with clinch nuts in the mountingholes (34 only).Standard with tabs for attaching junctionshells.Standard with mounting holes .120 dia.countersunk 100˚ to . 230 dia. (33. only).Combination of 01** and 02** (clinchnuts in mounting holes - 34 only and tabs for attaching junction shells).Standard with clinch nuts (.33 only).Standard with standard floating eyelets.Standard except less grommet (NE, pinonly).Same as - 29** except with tabs forattaching junction shells.Same as - 29** except with clinch nuts.Same as - 29** except with clinch nutsand tabs for attacting junction shells.Standard with standard floating eyeletsand tabs for attaching junction shells.NOTE: For additional modification codes please consult the factoryNOTE: On 3 & 4 gang assemblies, combination layouts, the contact type designator of the A106 layout. If applicable, precedes thedesignator for standard contact sex layouts. See three (3) gang nomenclature breakdown above for 240M example (67MS, 67 MS, A106P).Single GangTwo (2) GangDPXBNE A10633P 00DPXDPX DPX4NE 104M 34P 003NE 240M 33PS 002-----B NE 67MAW834PP00Three (3) GangFour (4) GangINSERT DESIGNATORSERIES PREFIX SHELL STYLE CLASSCONTACT ARRANGEMENT SHELL TYPE CONTACT TYPE MODIFICATIONSERIES PREFIX TWO (2) GANG SHELL CLASSCONTACT ARRANGEMENT (Side A)CONTACT TYPECONTACT ARRANGEMENT (Side B)CONTACT TYPE SHELL TYPE SHELL STYLE MODIFICATIONSERIES PREFIXTHREE (3) GANG SHELL CLASSINSERT DESIGNATOR SHELL TYPE CONTACT TYPE MODIFCATIONSERIES PREFIX FOUR (4) GANG SHELL CLASSINSERT DESIGNATOR SHELL TYPE CONTACT TYPE MODIFICATIONCONTACT ARRANGEMENT SHELL TYPECONTACT TYPEMODIFICATION CODES ------Insert Designator NumberPerformance and Material SpecificationsMATERIALS AND FINISHESELECTRICALContactsize12 16 20 22.135 (3.43).103 (2.62).071 (1.80).054 (1.37) 1214161820202224222426Note - The maximum contact resistance listed above is with sliver plated wire.23.017.013.0-7.57.5-3.05.0-2.023.017.013.0--7.5-3.05.0-2.0636068-7583-68110-80Wire SizeInsulation O.D.Limits (Inch)Max.Test Currentper Mil-C-39029Max. Currentfor Tests(Amps)(Mil-C-39029)DescriptionShell Aluminum alloy Cadmium plating, Type II, Class 3/QQ-P-416 withyellow chromate finish (underplating may be used)NoneNoneGold plate per MIL-G-45204, Type 1, Grade C,Class 1 with suitable underplating (silver not used)Anodize, blue colorSame as shellCadmium PlatingNoneCadmium platingNoneCadmium platingCadmium platingAluminum alloyAluminum alloyStainless steelStainless SteelZinc (die cast )Nickel SilverBrassPhosphor BronzeThermoplastic or thermosetting plasticSilicone rubber (ITT Cannon Blend)Copper alloyInsulatorsElastomersContactsInsulator Retaining PlateJunction Shells(Not available for four gang)Clinch NutsFloat MountsPolarizing PostsPolarizing Keys & Retaining PlateScrewsLockwashersMaterial FinishDPX3NA/DPX3NEMS3157 ITTC Side A Side B Side C MS3157 ITTC Side A Side B Side C MS3157 ITTC Side A Side B Side C Side D MS3157 ITTC Side A Side B Side C Side D0005 0006 0013 0014 0021 0022 0029 0030 0037 0038 0045 0046 006578M78M120M120M135M135M171M171M201M201MA318A31824M26MP26MS40MP40MS45MP45MS57MP57MS67MP67MSA106PA106SW8MP26MP26MS40MP40MS45MP45MS57MP57MS67MP67MSA106PA106SW8MP26MP26MS40MP40MS45MP45MS57MP57MS67MP67MSA106PA106SW8MP006600670068007300740075007600790080009100920157015824M122M122M142M142M240M240MA240MA240M279M279M244M244MW8MSW8MPW8MS67MP67MS67MP67MS67MP67MSA106SA106PA106SA106PW8MSW8MPW8MS67MP67MS67MP67MSA106SA106PA106SA106PA106SA106PW8MSA106SA106PW8MPW8MSA106SA106P67MP67MS67MP67MS32W4MP32W4MS000700080015001600230024003100320039004000470048104M104M160M160M180M180M228M228M268M268MA424A42426MP26MS40MP40MS45MP45MS57MP57MS67MP67MSA106PA106S26MP26MS40MP40MS45MP45MS57MP57MS67MP67MSA106PA106S26MP26MS40MP40MS45MP45MS57MP57MS67MP67MSA106PA106S26MP26MS40MP40MS45MP45MS57MP57MS67MP67MSA106PA106S00630064008500860095009600970098009901000101010295M95M150M150M326M326M287M287M189M189M346M346M10W3MP10W3MSW8MPW8MSA106SA106PA106SA106PA106SA106PA106SA106P10W3MP10W3MSW8MPW8MSW8MPW8MS67MP67MS67MP67MSA106SA106PW8MPW8MS67MP67MSA106SA106PA106SA106PW8MPW8MS67MP67MS67MP67MS67MP67MSA106SA106PW8MPW8MSW8MPW8MS67MP67MSDPX4NA/DPX4NEMax. PotentialDrop(Millivolts)at 25 CShell DimensionsDPXB-33TWO HOLESREF. ONLYKEYS2 HOLES .120 (3.05)DIA.POSTSNOTE: DPXME ANDDPXNE GROMMETS ARE APPLICABLE TO ALL SHELL SIZESKEYS.All tolerances +_ .015 (0.38) unless other wise noted..988 +_ .004(25.10 +.DPXB-34DPX2-33BDPX2-34B.120 (3.05) & C' SUNK82 X .230 (5.84) DIA..120 (3.05) DIA. & C' SUNK 82 x.230 (5.84) DIA. 4 HOLESShell DimensionsModification CodeDPX3-33-2301 Modification Floating Eyelets34 CONNECTORRecommended MatedPositionAll tolerances +_ .015 (0.38) unless otherwise noted.-0201 Modification Tabs for attaching J/S .115DIA.DPX3-34DPX4-34DPX4-33Panel CutoutsDPXB-33 Front Mount-34 Front Mount-34 Rear Mount-33 Rear Mount -34B Rear Mount-34B Front Mount-33B Front MountFront MountRear MountAll tolerance +_ .015 (0.38) unless other wise noted.-33B Rear Mount.(3.18).125 R.TYP..For - 23 float mtg. mod. 1.78 (45.21)1DPX2DPX3Panel Cutouts (Continued)DPX4FRONT MOUNT REAR MOUNT.All tolerance +_ .015 (0.38) unless otherwise noted.LContact ArranementsFace View of Pin Insulator Shown.Layout Contacts Test VoltageCross ReferenceD8M 4 #16,4 #121500W8M 8 Coaxial*1000MS3157C8E810C32632C232C44040C1455767106ITTC W8M D8M 10W3M 26M 32W2M 32W4M 33C4M40M 40W1M 45M 57M 67M A10626M 26 #16150010W3M7HD #20, 3 Coaxial**1500(Coax 1000)32W2M30HD #20, 2 Coaxial†1500(Coax 1000)32W4M 24HD #204 #16, 4 Coaxial*1500(Coax 1000)33C4M25HD #20, 4 Coaxial†100045M 45HD #20150040W1M39HD #20, 1 COAXIAL†1500(COAX 1000)40M 40HD #20150057M 57 HD #201500*SIZE 9 COAXIAL **SIZE 11 COAXIAL † SIZE 5 COAXIALNOTE: All coaxial layouts supplied less coaxial contacts (i.e. W8M, 10W3M, 32W2M, 32W4M, 33C4M, 36W7, 40W1M)67M64 HD #20, 3 #161000A106106 #221000Layout Contacts Test VoltageLayout Contacts Test VoltageLayout Contacts Test VoltageLayout Contacts Test VoltageContact and Termination Tooling Data - MilitaryCoaxial Contact DataDPX*NE/NAComponents/AccessoriesWire Strip DimensionsLITTLE CAESAR® contact retention assembly (W8M, 32W2M, 32W4M & 40W1M contact arrangements)Part Number (P=Pin, S = Socket)Without Seal††With Seal Contact Arrangement (Size 5 Coax)(Size 9 Coax)A152†††A152†††Seal 1Seal 2Cable Accommodation† Ins. Dia.Size/Max.'A'Trim Dim.A176†††Contact Size 2222030-1975-008(M39029/11-144)031-1113-008(M39029/12-148)22, 24, 26M22520/2-01M22520/2-01MS-3191-1M22520/1-01MS-3191-1M22520/1-01M22520/2-23M22520/2-08StandardM22520/1-02Std. LocatorM22520/1-11CIT-DPXMA-22M81969/1-01CIT-20CET-20D-1M81969/1-02CIET-16CIET-12A10610W3M,32W2M,32W4M,40M,40W1M,45M,57M,67M,D8M,26M,32W4M,67M D8M20, 22, 2416, 18, 2012, 14030-1892-004(M39029/11-145)031-1047-003(M39029/12-149)030-9083-012(M39029/11-146)031-1271-000(M39029/12-150)031-1059-003(M39029/12-151)030-1909-002(M39029/11-147)P-249-2071-000S-249-2076-000P-249-2072-000S-249-2077-000P-249-2073-000S-249-2078-000P-249-2074-000S-249-2079-000P-249-2075-000S-249-2080-000P-249-2081-000S-249-2086-000P-249-2082-000S-249-2087-000P-249-2083-000S-249-2088-000P-249-2084-000S-249-2089-000P-249-2085-000S-249-2090-000249-2071-001249-2076-001249-2072-001249-2077-001249-2073-001249-2078-001249-2074-001249-2079-001249-2075-001249-2080-001249-2081-001249-2086-001249-2082-001249-2087-001249-2083-001249-2088-001249-2084-001249-2089-001249-2085-001249-2090-001249-2101-000249-2106-000249-2102-000249-2107-000249-2103-000249-2108-000249-2104-000249-2109-000249-2105-000249-2110-000249-2111-000249-2116-000249-2112-000249-2117-000249-2113-000249-2118-000249-2114-000249-2119-000249-2115-000249-2120-000RG180RG58RG142RG179RG178RG196RG180RG58RG142RG179RG178U RG196U #22#20HD #16#12.130/.110(3.30/2.79).167/.147(4.24/3.73).270/.230(6.86/5.84).270/.230(6.86/5.84)Wire Strip DimensionA Dim.RG195UXXRG174, RG179,RG316XRG195UXXRG174, RG179,RG316X.158 (4.01).196 (4.98).196 (4.98).111 (2.82).075 (1.90).158 (4.01).196 (4.98).196 (4.98).111 (2.82).075 (1.90).260(6.60).250(6.35).260(6.60).250(6.35).260(6.60).250(6.35).350(8.89).330(8.38).260(6.60).250(6.35).260(6.60).250(6.35).260(6.60).250(6.35).260(6.60).250(6.35).350(8.89).330(8.38).260(6.60).250(6.35)2020HD16161212*Requires air line pressure of 80 to 100 PSI for CBT-600 and 120 PSI for CBT-600B.32W2M 40W1M 36W733W4W8M 32W4MNOTES:Coaxials without the seal accommodates both Seal 1 and Seal 2 cables.Coaxials without the seal are utilized in DPX*NE connectors supplied less the grommet (modification code: - 29**) and DPX*NA connectors.A152 modification code indicates .00005 (0.0010) gold plating on coaxial contacts. (Standard for the DPXNE/NA series.)A176 modification code indicates .00002 (0.0005) gold plating on coaxial contacts.PinPart Number (Military Equivalent)Socket Part Number (Military Equivalent)Wire Accom.Crimp Tool Part Number Locator Part Number Insertion/Extraction Tool Layout UsageDPX*NE/NA††††††Coaxial Contact DataInstallation Data1. Use basic tool M22520/5-01 with Y-211 die (#995-0002-249) for crimping.2. Use extraction tool No. CET-C8. An insertion tool is not requried (See Note 5).3. Center contact, rear insulator, crimp ring, support bushing (not applicable to RG58/RG142 coax- ials), seal sleeve, front insulator, shell and ferrule are shipped unassembled in a common container.Without SealSocketPinSealedPush ferrule under braid as far as it will go. Trim off braid extending beyond shoulder of ferrule, if necessary.While holding ferrule in place pull crimp sleeve forward over braid untill it is tight against shoulder on ferrrule. Pull firmly against face of ferrule to make sure it is up tight.Trim dielectric to the .035 (0.89)/.030 (0.76) dimension.Place front insulator over contact and then push assembly into coaxial shell.Place parts in jaw of crimp tool. Locate jaws at start of chamber on crimp sleeve. Press sleeve firmly into coaxial shell and crimp.After assembled coaxial is inserted into connector, push suppurt bushing into grommet until shoulder rests on tubular extension. Then pull sealing sleeve forward until it is snug on grommet.A.B.C.A.B.C.Carefully push inner conductor through rear insulator.While holding rear insulator firmly against ferrule, trim conductor to .156 (3.96)/.146 (3.91) dimension.Place contact over conductor and solder.A.B.C.SEAL 14. Cable Assembly InstructionsStep 1 - If applicable determine which portion of seal sleeve should be used. If Seal 2 is used, cut off Seal 1 portion.Step 2 - In sequence, place seal sleeve, support bushing and crimp ring over cable jacket. Step 3 - Trim cable per illustration.Step 4 - Comb out braid and flare out ends to permit entry of ferrule.Step 5 - Complete termination per illustration.5. To extract coaxial, push back seal sleeve and support bushing. Slip cable into extraction tool Push tool into insert until contacts coaxial retain- ing shoulder. Grip both cable and tool with one hand and pull coaxial rearward out of insert cavity.6. To facilitate extraction of contacts, the length of free cable adjacent to the rear surface of the connector should not be less than 2.000 (50.80).Polarization PositionsMIL-C-81659B requires that polarizing post beshipped unassembled with the connector. The user then assembles the post in the preferred position and marks the position number on the connector. All DPXNA and DPXNE connectors shall be sold this way. The position number will not be marked.The last two digits in the four-digit dash number refer to the polarizing post position. The polarizing posts will be shipped unassembled with the connectorassembly. The position number is not stamped on the connector. This allows the customer to position the posts themselves and then stamp the appropriate number on the shell.PositionsFace View of Engaging EndDPXB-33Dark area represents postDPXB-3434 RECEPTACLE FEMALE SHELL33 PLUG MALE SHELLPosition 0102030405060708091011121314151617181920212223242526272829303132333435363738394041424344454647484950Position 0102030405060708091011121314151617181920212223242526272829303132333435363738394041424344454647484950Position 51525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899Position 51525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899Left Post 12345612345612345612345612345612345612345612345612Left Post 3456123456123456123456123456123456123456323456123Left Post 44444455555566666611111122222233333344444455555566Left Post 6666111111222222333333444444555555666666111111222Center Post 11111111111111111111111111111111111122222222222222Center Post 2222222222222222222222333333333333333333333333333Center Post 44444444444444444444444444444444444433333333333333Center Post 3333333333333333333333222222222222222222222222222Right Post 11111166666655555544444433333322222211111166666655Right Post 5555444444333333222222111111666666555555444444333Right Post 43216543216543216543216543216543216543216543216543Right Post 2165432165432165432165432165432165432165432165432DPX3-33DPX2-33BDPX2-34BDPX4-33Cross Reference from Military to Cannon Part Numbers Military Part NumberM81659/29A2-000100020009001000170018002500260033003400410042008300840135013601370138013901400141014201490150 M81659/31A2-00100020009001000170018002500260033003400410042008300840135013601370138013901400141014201490150 M81659/33A2-00030004001100120019002000270028003500360043004400570058005900600071007200870088008900900109011001110112011301140115011601170118011901200121M81659/35A2-01220123012401250126012701280129013001310132013301340145014601470148015101520155015601590160M81659/35A2-0003000400110012001900200027002800350036004300440057005800590060007100720087008800890090010901100111011201130114011501160117011801190120012101220123012401250126012701280129013001310132013301340145014601470148015101520155015601590160M81659/37A2-00050006001300140021002200290030003700380045004600650066006700680073007400750076007900800091009201570158M81659/39A2-00050006001300140021002200290030003700380045004600650066006700680073007400750076007900800091009201570158M81659/41A2-00070008001500160023002400310032003900400047004800610062006300640085008600950096009700980099010001010102DPX2NE-32W2MS40W1MS-33B-00DPX2NE-32WMP45MP-33B-00DPX2NE-32W2MS45MS-33B-00DPX2NE-32W2MP57MP-33B-00DPX2NE-32W2MS57MS-33B-00DPX2NE-32W2MP67MP-33B-00DPX2NE-32W2MS67MS-33B-00DPX2NE-32W2MPA106S-33B-00DPX2NE-32W2MSA106P-33B-00DPX2NE-40W1MP40W1MP-33B-00DPX2NE-40W1MS40W1MS-33N-00DPX2NE-57MPA106S-33B-00DPX2NE-57MSA106P-33B-00DPX2NE-W8MP57MP-33B-00DPX2NE-W8MS57MS-33B-00DPX2NE-57MP26MP-33B-00DPX2NE-57MS25MS-33B-00DPX2NE-32W4MPA106S-33B-00DPX2NE-32W4MSA106P-33B-00DPX2NE-W8MP32W4MP-33B-00DPX2NE-W8MS32W4MS-33B-00DPX2NE-32W4MPW8MP-33B-00DPX2NE-32W4MSW8MS-33B-00DPX2N2-26MP26MP-34B-00DPX2NE-26MS26MS-34B-00DPX2NE-40MP40MP-34B-00DPX2NE-40MS40MS-34B-00DPX2NE-45MP45MP-34B-00DPX2NE-45MS45MS-34B-00DPX2NE-57MP57MP-34B-00DPX2NE-57MS57MS-34B-00DPX2NE-67MP67MP-34B-00DPX2NE-67MS67MS-34B-00DPX2NE-A106PA106P-34B-00DPX2NE-A106SA106S-34B-00DPX2NE-A106S26MP-34B-00DPX2NE-A106P26MS-34B-00DPX2NE-26MPA106S-34B-00DPX2NE-26MSA106P-34B-00DPX2NE-67MPA106S-34B-00DPX2NE-67MSA106P-34B-00DPX2NE-A106SW8MP-34B-00DPX2NE-A106PW8MS-34B-00DPX2NE-A106S67MP-34B-00DPX2NE-A106P67MS-34B-00DPX2NE-C2P40W1MP-34B-00DPX2NE-C2S40W1MS-34B-00DPX2NE-C2P57MP-34B-00DPX2NE-C2S57MS-34B-00DPX2NE-AC3P67MP-34B-00DPX2NE-AC3S67MS-34B-00DPX2NE-AC3PA106S-34B-00DPX2NE-AC3SA106P-34B-00DPX2NE-W8MPA106S-34B-00DPX2NE-W8MSA106P-34B-00DPX2NE-10W3P32W2MP-34B-00DPX2NE-10W3S32W2MS-34B-00DPX2NE-32W2MP40W1MP-34B-00DPX2NE-32W2MS40W1MS-34B-00DPX2NE-32W2MP45MP-34B-00DPX2NE-32W3MS45MS-34B-00DPX2NE-32W2MP57MP-34B-00DPX2NE-32W3MS57MS-34B-00DPX2NE-32W2MP67MP-34B-00DPX2NE-32W2MS67MS-34B-00DPX2NE-32W2MPA106S-34B-00DPX2NE-32W2MSA106P--34B-00DPX2NE-40W1MP40W1MP-34B-00DPX2NE-40W1MS40W1MS-34B-00DPX2NE-57MPA106S-34B-00DPX2NE-57MSA106P-34B-00DPX2NE-W8MP57MP-34B-00DPX2NE-W8MS57MS-34B-00DPX2NE-57MP26MP-34B-00DPX2NE-57MS26MS-34B-00DPX2NE-32W4MPA106S-34B-00DPX2NE-32W4MSA106P-34B-00DPX2NE-W8MP32W4MP-34B-00DPX2NE-W8MS32W4MS-34B-00DPX2NE-32W4MPW8MP-34B-00DPX2NE-32W4MSW8MS-34B-00DPX3NE-78M-33P-00DPX3NE-78M-33S-00DPX3NE-120M-33P-00DPX3NE-120M-33S-00DPX3NE-135M-33P-00DPX3NE-135M-33S-00DPX3NE-171M-33P-00DPX3NE-171M-33S-00DPX3NE-201M-33P-00DPX3NE-201M-33S-00DPX3NE-A318-33P-00DPX3NE-A318-33S-00DPX3NE-24M-33P-00DPX3NE-24M-33S-00DPX3NE-122M-33SP-00DPX3NE-122M-33PS-00DPX3NE-142M-33P-00DPX3NE-142M-33S-00DPX3NE-240M-33P-00DPX3NE-240M-33S-00DPX3NE-A240M-33SP-00DPX3NE-A240M-33PS-00DPX3NE-279M-33SP-00DPX3NE-279M-33PS-00DPX3NE-244M-33SP-00DPX3NE-244M-33PS-00DPX3NE-78M-34P-00DPX3NE-78M-34S-00DPX3NE-120M-34P--00DPX3NE-120M-34S-00DPX3NE-135M-34P-00DPX3NE-135M-34S-00DPX3NE-171M-34P-00DPX3NE-171M-34S-00DPX3NE-201M-34P-00DPX3NE-201M-34S-00DPX3NE-A318-34P-00DPX3NE-A318-34S-00DPX3NE-24M-34P-00DPX3NE-24M-34S-00DPX3NE-122M-34SP-00DPX3NE-122M-34PS-00DPX3NE-142M-34P-00DPX3NE-142M-34S-00DPX3NE-240M-34P-00DPX3NE-240M-34S-00DPX3NE-A240M-34SP-00DPX3NE-A240M-34PS-00DPX3NE-279M-34SP-00DPX3NE-279M-34PS-00DPX3NE-244M-34SP-00DPX3NE-244M-34PS-00DPX4NE-104M-33P-00DPX4NE-104M-33S-00DPX4NE-160M-33P-00DPX4NE-160M-33S-00DPX4NE-180M-33P-00DPX4NE-180M-33S-00DPX4NE-228M-33P-00DPX4NE-228M-33S-00DPX4NE-268M-33P-00DPX4NE-268M-33S-00DPX4NE-A424-33P-00DPX4NE-A424-33S-00DPX4NE-104M-33P-00DPX4NE-104M-33S-00DPX4NE-95M-33P-00DPX4NE-95M-33S-00DPX4NE-150M-33P-00DPX4NE-150M-33S-00DPX4NE-326M-33SP-00DPX4NE-326M-33PS-00DPX4NE-287M-33SP-00DPX4NE-287M-33PS-00DPX4NE-189M-33SP-00DPX4NE-189M-33PS-00DPX4NE-346M-33SP-00DPX4NE-346M-33PS-00 DPXBNE-26M-33P-00DPXBNE-26M-33S-00DPXBNE-40M-33P-00DPXBNE-40M-33S-00DPXBNE-45M-33P-00DPXBNE-45M-33S-00DPXBNE-57M-33P-00DPXBNE-57M-33S-00DPXBNE-67M-33P-00DPXBNE-67M-33S-00DPXBNE-A106-33P-00DPXBNE-A106-33S-00DPXBNE-D8M-33P-00DPXBNE-D8M-33S-00DPXBNE-W8M-33P-00DPXBNE-W8M-33S-00DPXBNE-10W3M-33P-00DPXBNE-10W3M-33S-00DPXBNE-32W2M-33P-00DPXBNE-32W2M-33S-00DPXBNE-40W1M-33P-00DPXBNE-40W1M-33S-00DPXBNE-32W4M-33P-00DPXBNE-32W4M-33S-00DPXBNE-26M-33P-00DPXBNE-26M-33S-00DPXBNE-40M-33P-00DPXBNE-40M-33S-00DPXBNE-45M-33P-00DPXBNE-45M-33S-00DPXBNE-57M-33P-00DPXBNE-57M-33S-00DPXBNE-67M-33P-00DPXBNE-67M-33S-00DPXBNE-A106-33P-00DPXBNE-A106-33S-00DPXBNE-D8M-33P-00DPXBNE-D8M-33S-00DPXBNE-W8M-33P-00DPXBNE-W8M-33S-00DPXBNE-10W3M-33P-00DPXBNE-10W3M-33S-00DPXBNE-32W2M-33P-00DPXBNE-32W2M-33S-00DPXBNE-40W1M-33P-00DPXBNE-40W1M-33S-00DPXBNE-32W4M-33P-00DPXBNE-32W4M-33S-00DPX2NE-26MP26MP-33B-00DPX2NE-26MS26MS-33B-00DPX2NE-40MP40MP-33B-00DPX2NE-40MS40MS-33B-00DPX2NE-45MP45MP-33B-00DPX2NE-45MS45MS-33B-00DPX2NE-57MP57MP-33B-00DPX2NE-57MS57MS-33B-00DPX2NE-67MP67MP-33B-00DPX2NE-67MS67MS-33B-00DPX2NE-A106PA106P-33B-00DPX2NE-A106SA106S-33B-00DPX2NE-A106S26MP-33B-00DPX2NE-A106P26MS-33B-00DPX2NE-26MPA106S-33B-00DPX2NE-26MSA106P-33B-00DPX2NE-67MPA106S-33B-00DPX2NE-67MSA106P-33B-00DPX2NE-A106PW8MP-33B-00DPX2NE-A106PW8MS-33B-00DPX2NE-A106S67MP-33B-00DPX2NE-A106P67MS-33B-00DPX2NE-C2P40W1MP-33B-00DPX2NE-C2S40W1MS-33B-00DPX2NE-C2P57MP-33B-00DPX2NE-C2S57MS-33B-00DPX2NE-AC3P67MP-33B-00DPX2NE-AC3S67MS-33B-00DPX2NE-AC3PA106S-33B-00DPX2NE-AC3SA106P-33B-00DPX2NE-W8MSA106S-33B-00DPX2NE-W8MSA106P-33B-00DPX2NE-10W3MP32W2MP-33B-00DPX2NE-10W3MS32W2MS-33B-00DPX2NE-32W2MP40W1MP-33B-00Cannon Part Number Military Part Number Cannon Part Number Military Part Number Cannon Part NumberCross Reference from Military to Cannon Part Numbers (Continued) Military Part NumberM81659/43A2-00070008001500160023002400310032003900400047004800610062006300640085008600950096009700980099010001010102 M81659/61A2-000100020009001000170018002500260033003400410042008300840135013601370138013901400141014201490150 M81659/62A2-0003000400110012001900200027002800350036004300440057005800590060007100720087008800890090010901100111011201130114011501160117011801190120M81659/62A2-012101220123012401250126012701280129013001310132013301340145014601470148015101520155015601590160M81659/63A2-00050006001300140021002200290030003700380041004600650066006700680073007400750076007900800091009201570158M81659/ 64A2-00070008001500160023002400310032003900400047004800610062006300640085008600950096009700980099010001010102M81659/65A2-0001000200090010001700180025M81659i65A2-00260033003400410042008300840135013601370138013901400141014201490150M81659/66A2-000100020009001000170018002500260033003400410042008300840135013601370138013901400141014201490150M81659 67A2-000100020009001000170018002500260033003400410042008300840135013601370138013901400141014201490150M81659/68A2-00010002000900100017001800250026003300340041004200830084013501360137DPX2NE-32W2MP40W1MP-34S-29DPX2NE-32W2MP40W1MS-348-29DPX2NE-32W2MP45MP-348-29DPX2NE-32W2MS45MS-34B-29DPX2NE-32W2MP57MP-348-29DPX2NE-32W2MS57MS-34B-29DPX2NE-32W2MP67MP-348-29DPX2NE-32W2MS67MS-34B-29DPX2NE-32W2MPA106S-34B-29DPX2NE-32W2MSA106P-34B-29DPX2NE-40W1MP40W1MP-34B-29DPX2NE-40WIMS40W1MS-34B-29DPX2NE-57MPA106S-34B-29DPX2NE-57MSA106P-348-29DPX2NE-W8MP57MP-34B-29DPX2NE-W8MS57MS-348-29DPX2NE-57MP26MP-34B-29DPX2NE-57MS26MS-34B-29DPX2NE-32W4MPA106S-34B-29DPX2NE-32W4MSA106P-34B-29DPX2NE-W8MP32W4MP-34B-29DPX2NE-W8MS32W4MS-34B-29DPX2NE-32W4MPW8MP-34B-29DPX2NE-32W4MSW8MS-348-29DPX3NE-78M-34P-29DPX3NE-78M-34S-29DPX3NE-120M-34P-29DPX3NE-120M-34S-29DPX3NE-135M-34P-29DPX3NE-135M-34S-29DPX3NE-17IM-34P-29DPX3NE-171M-34S-29DPX3NE-201M-34P-29DPX3NE-201M-34S-29DPX3NE-A318-30-29DPX3NE-A318-34S-29DPX3NE-24M-34P-29DPX3NE-24M-34S-29DPX3NE-122M-34SP-29DPX3NE-122M-34PS-29DPX3NE-142M-34P-29DPX3NE-142M-34S-29DPX3NE-240M-34P-29DPX3NE-240M-34S-29DPX3NE-A240M-34SP-29DPX3NE-A240M-34PS-29DPX3NE-279M-34SP-29DPX3NE-279M-34PS-29DPX3NE-244M-34SP-29DPX3NE-244M-34PS-29DPX4NE-104M-34P-29DPX4NE-104M-34S-29DPX4NE-160M-34P-29DPX4NE-160M-34S-29DPX4NE-180M-34P-29DPX4NE-180M-34S-29DPX4NE-228M-34P-29DPX4NE-228M-34S-29DPX4NE-268M-34P-29DPX4NE-268M-34S-29DPX4NE-A424-34P-29DPX4NE-A424-34S-29DPX4NE-104M-34P-29DPX4NE-104M-34S-29DPX4NE-95M-34P-29DPX4NE-95M-34S-29DPX4NE-150M-34P-29DPX4NE-150M-34S-29BPX4NE-326M-34SP-29DPX4NE-326M-34PS-29DPX4NE-287M-34SP-29DPX4NE-287M-34PS-29DPX4NE-189M-34SP-29DPX4NE-189M-34PS-29DPX4NE-346M-34SP-29DPX4NE-346M-34PS-29DPXBNA-26M-33P-00DPXBNA-26M-33S-00DPXBNA-40M-33P-00DPXBNA-40M-33S-00DPXBNA-45M-33P-00DPXBNA-45M-33S-00DPXBNA-57M-33P-00DPXBNA-57M-33S.00DPXBNA-67M-33P.00DPXBNA-67M-33S-00DPXBNA-A106-33P-00DPXBNA-A106-33S-00DPXBNA-D8M-33P-00DPXBNA-D8M-33S-00DPXBNA-W8M-33P-00DPXBNA-W8M-33S-00DPXBNA-10W3M-33P.00DPXBNA-10W3M-33S-00DPXBNA-32W2M-33P-00DPXBNA-32W2M-33S-00DPXBNA-40W1M.33P-00DPXBNA-40W1M-33S-00DPXBNA-32W4M-33P-00DPXBNA-32W4M-33S-00DPXBNA-26M-34P-00DPXBNA-26M-34S-00DPXBNA-40M-34P-00DFXBNA-40M-34S-00DPXBNA-45M-34P-00DPXBNA-45M-34S-00DPXBNA-57M-34P-00DPXBNA-57M-34S.00DPXBNA-67M-34P-00DPXBNA-67M-34S-00DPXBNA-A106-34P-00DPXBNA-A106-34S-00DPXBNA-D8M-34P-00DPXBNA-D8M-34S-00DPXBNA-W8M-34P-00DPXBNA-W8M-34S-00DPXBNA-10W3M-34P.00DPXBNA-10W3M-34S-00DPXBNA-32W2M-34P-00DPXBNA-32W2M-34S-00DPXBNA-40W1M-34P-00DPXBNA-40W1M-34S-00DPXBNA-32W4M-34P-00DPXBNA-32W4M-34S-00DPXBNA-26M-34P-01DPXBNA-26M-34S-01DPXBNA-40M-34P-01DPXBNA-40M-34S-01DPXBNA-45M-34P-01DPXBNA-45M-34S-01DPXBNA-57M-34P-01DPXBNA-57M-34S-01DPXBNA-67M-34P-01DPXBNA-67M-34S-01DPXBNA-A106-34P-01DPXBNA-A106-34S-01DPXBNA-D8M-34P-01DPXBNA-D8M-34S-01DPXBNA-W8M-34P-01DFXBNA-W8M-34S-01DPXBNA-10W3M-34P-01DPXBNA-10W3M-34S-01DPXBNA-32W2M-34P-01DPXBNA-32W2M-34S-01DPXBNA-40W1M-34P-01DPXBNA-40W1M-34S-01DPXBNA-32W4M-34P-01DPXBNA-32W4M-34S-01DPXBNA-26M-34P-23DPXBNA-26M-34S-23DPXBNA-40M-34P-23DPXBNA-40M-34S-23DPXBNA-45M-34P-23DPXBNA-45M-34S-23DPXBNA-57M-34P-23DPXBNA-57M-34S-23DPXBNA-67M-34P-23DPXBNA-67M-34S-23DPXBNA-A106-34P-23DPXBNA-A106-34S-23DPXBNA-D8M-34P-23DPXBNA-D8M-34S-23DPXBNA-W8M-34P-23DPXBNA-W8M-34S-23DPXBNA-10W3M-34P-23 DPX4NE-104M-34P-00DPX4NE-104M-34S-00DPX4NE-160M-34P-00DPX4NE-160M-34S-00DPX4NE-180M-34P-00DPX4NE-180M-34S-00DPX4NE-228M-34P-00DPX4NE-228M-34S-00DPX4NE-268M-34P-00DPX4NE-268M-34S-00DPX4NE-A424-34P-00DPX4NE-A424-34S-00DPX4NE-104M-34P-00DPX4NE-104M-34S-00DPX4NE-95M-34P-00DPX4NE-95M-34S-00DPX4NE-150M-34P-00DPX4NE-150M-34S-00DPX4NE-326M-34SP-00DPX4NE-326M-34PS-00DPX4NE-287M-34SP-00DPX4NE-287M-34PS-00DPX4NE-189M-34SP-00DPX4NE-189M-34PS-00DPX4NE-346M-34SP-00DPX4NE-346M-34PS-00DPXBNE-26M-34P-29DPXBNE-26M-34S-29DPXBNE-40M-34P-29DPXBNE-40M-34S-29DPXBNE-45M-34P-29DPXBNE-45M-34S-29DPXBNE-57M-34P-29DPXBNE-57M,34S-29DPXBNE-67M-34P-29DPXBNE-67M-34S-29DPXBNE-A106-34P-29DPXBNE-A106-34S-29DPXBNE-D8M-34P-29DPXBNE-D8M-34S-29DPXBNE-W8M-34P-29DPXBNE-W8M-34S-29DPXBNE-10W3M-34P-29DPXBNE-10W3M-34S-29DPXBNE-32W2M-34P-29DPXBNE-32W2M-34S-29DPXBNE-40W1M-34P-29DPXBNE-40W1M-34S-29DPXBNE-32W4M-34P-29DPXBNE-32W4M-34S-29DPX2NE-26MP:26MP-348-29DPX2NE-26MS26MS-348-29DPX2NE-40MP40MP-34B-29DPX2NE-40MS40MS-34B-29DPX2NE-45MP45MP-34B-29DPX2NE-45MS45MS-348-29DPX2NE-57MP57MP-34B-29DPX2NE-57MS57MS-348-29DPX2NE-67MP67MP-34B- 29DPX2NE-67MS67MS-348-29DPX2NE-A106PA106P-34B-29DPX2NE-A106SA106S-348-29DPX2NE-A106S26MP-348-29DPX2NE-A106P26MS-348-29DPX2NE-26MPA106S-34B-29DPX2NE-26MSA106P-348-29DPX2NE-67MPA106S-348-29DPX2NE-67MSA106P-34B-29DPX2NE-A10BSW8MP-34B-29DPX2NE-A106PWBMS-34B-29DPX2NE-A106S67MP-348-29DPX2NE-A106P67MS-348-29DPX2NE-C2P46W1MP-348-29DPX2NE-C2S40W1MS-34B-29DPX2NE-C2P57MP-34B-29DPX2NE-C2S57MS-348-29DPX2NE-AC3P67MP-34B-29DPX2NE-AC3S67MS-348-29DPX2NE-AC3PA106S-34B-29DPX2NE-AC3SA106P-34B-29DPX2NE-W8MPA106S-34B-29DPX2NE-W8MSA106P-34B-29DPX2NE-10W3P32W2MP-34B-29DPX2NE-10W3S32W2MS-34B-29Cannon Part Number Military Part Number Cannon Part Number Military Part Number Cannon Part Number。
BDM100系列技术资料V2.1
MYG 压敏电阻型号及主要技术参数汇总
型号最大连续工作电压压敏电压最大限制电压通流容量(8/20u s最大能量(J额定功率电容量AC(V DC(V V0.1mA Vp(V lp(A 1次(A 2次(A 2ms (W 1KH Z (pFMYG-05D180K 11 14 18(16-20 40 1 100 50 0.5 0.01 1400 MYG-05D220K 14 18 22(20-24 48 1 100 50 0.7 0.01 1150 MYG-05D270K 17 22 27(24-30 60 1 100 50 0.8 0.01 930 MYG-05D330K 20 26 33(30-36 73 1 100 50 0.9 0.01 760 MYG-05D390K 25 31 39(35-43 86 1 100 50 1.1 0.01 640 MYG-05D470K 30 38 47(42-52 104 1 100 50 1.4 0.01 530 MYG-05D560K 35 45 56(50-62 123 1 100 50 1.7 0.01 450 MYG-05D680K 40 56 68(61-75 145 1 100 50 2.0 0.01 370 MYG-05D820K 50 65 82(74-90 150 5 400 200 2.5 0.10 300 MYG-05D101K 60 85 100(90-110 175 5 400 200 3.0 0.10 250 MYG-05D121K 75 100 120(108-132 210 5 400 200 3.6 0.10 210 MYG-05D151K 95 125150(135-165 260 5 400 200 4.5 0.10 165 MYG-05D181K 115 150 180(162-198 320 5 400 200 5.0 0.10 140 MYG-05D201K 130 170 200(185-225 355 5 400 200 6.0 0.10 125 MYG-05D221K 140 180 220(198-242 380 5 400 200 6.5 0.10 110 MYG-05D241K 150 200 240(216-264 415 5 400 200 7.5 0.10 100 MYG-05D271K 175 225 270(243-297 475 5 400 200 8.0 0.10 95 MYG-05D301K 190 250 300(270-330 520 5 400 200 8.5 0.10 85 MYG-05D331K 210 275 330(297-363 570 5 400 200 9.5 0.10 75 MYG-05D361K 230 300 360(324-396 620 5 400 200 11 0.10 70 MYG-05D391K 250 320 390(351-429 675 5 400 200 12 0.10 65 MYG-05D431K 275 350 430(387-473 745 5 400 200 13.5 0.10 60 MYG-05D471K 300 385 470(423-517 810 5 400 200 15 0.10 55 MYG-05D511K 320 415 510(459-561 845 5 400 200 15 0.10 50 MYG-05D561K 350 460 560(504-616 920 5 400 200 17 0.10 45 MYG-07D180K 11 14 18(16-20 36 2.5 250 125 1.0 0.02 3500 MYG-07D220K 14 18 22(20-24 43 2.5 250 125 1.3 0.02 2800 MYG-07D270K 17 22 27(24-30 53 2.5 250 125 1.6 0.02 1800 MYG-07D330K 20 26 33(30-36 65 2.5 250 125 1.9 0.02 1500 MYG-07D390K 25 31 39(35-43 77 2.5 250 125 2.3 0.02 1300 MYG-07D470K 30 38 47(42-52 93 2.5 250 125 2.8 0.02 1100 MYG-07D560K 35 45 56(50-62 110 2.5 250 125 3.3 0.02 890 MYG-07D680K 40 56 68(61-75 135 2.5 250 125 4.1 0.02 740 MYG-07D820K 50 65 82(74-90 135 10 1200 600 4.8 0.25 600 MYG-07D101K 60 85 100(90-110 165 10 1200 600 6.0 0.25 500 MYG-07D121K 75 100 120(108-132 200 10 1200600 7.3 0.25 420 MYG-07D151K 95 125 150(135-165 250 10 1200 600 9.0 0.25 220 MYG-07D181K 115 150 180(162-198 300 10 1200 600 11 0.25 280 MYG-07D201K 130 170 200(185-225 340 10 1200 600 12.5 0.25 250 MYG-07D221K 140 180 220(198-242 360 10 1200 600 13.5 0.25 230 MYG-07D241K 150 200 240(216-264 395 10 1200 600 15 0.25 210 MYG-07D271K 175 225 270(243-297 455 10 1200 600 17 0.25 185 MYG-07D301K 190 250 300(270-330 500 10 1200 600 18.5 0.25 165 MYG-07D331K 210 275 330(297-363 550 10 1200 600 20 0.25 150 MYG-07D361K 230 300 360(324-396 595 10 1200 600 23 0.25 140MYG-07D391K 250 320 390(351-429 650 10 1200 600 25 0.25 130 MYG-07D431K 275 350 430(387-473 710 10 1200 600 27.5 0.25 115 MYG-07D471K 300 385 470(423-517 775 10 1200 600 30 0.25 150 MYG-07D511K 320 415 510(459-561 845 10 1200 600 32 0.25 100 MYG-07D561K 350 460 560(504-616 920 10 1200 600 35 0.25 90 MYG-07D621K 385 505 620(558-682 1025 10 1200 600 38 0.25 80 MYG-07D681K 420 560 680(612-748 1120 10 1200 600 42 0.25 75 MYG-10D180K 11 14 18(16-20 36 5 500 250 1.5 0.05 7500 MYG-10D220K 14 18 22(20-24 43 5 500 250 2.0 0.05 6000 MYG-10D270K 17 22 27(24-30 53 5 500 250 2.5 0.05 4000 MYG-10D330K 20 2633(30-36 65 5 500 250 3.0 0.05 3000 MYG-10D390K 25 31 39(35-43 77 5 500 250 3.5 0.05 2600 MYG-10D470K 30 38 47(42-52 93 5 500 250 4.5 0.05 2200 MYG-10D560K 35 45 56(50-62 110 5 500 250 5.5 0.05 1800 MYG-10D680K 40 56 68(61-75 135 5 500 250 6.5 0.05 1300 MYG-10D820K 50 65 82(74-90 135 25 2500 1250 8.0 0.4 1800 MYG-10D101K 60 85 100(90-110 165 25 2500 1250 10 0.4 1400 MYG-10D121K 75 100 120(108-132 200 25 2500 1250 12 0.4 1100 MYG-10D151K 95 125 150(135-165 250 25 2500 1250 16 0.4 900 MYG-10D181K 115 150 180(162-198 300 25 2500 1250 18 0.4 750 MYG-10D201K 130 170 200(185-225 340 25 2500 1250 20 0.4 500 MYG-10D221K 140 180 220(198-242 360 25 2500 1250 23 0.4 450 MYG-10D241K 150 200 240(216-264 395 25 2500 1250 25 0.4 400 MYG-10D271K 175 225 270(243-297 455 25 2500 1250 30 0.4 350 MYG-10D301K 190 250 300(270-330 500 25 2500 1250 30 0.4 330 MYG-10D331K 210 275 330(297-363 550 25 2500 1250 30 0.4 300 MYG-10D361K 230 300 360(324-396 595 25 2500 1250 35 0.4 270 MYG-10D391K 250 320 390(324-396 650 25 2500 1250 40 0.4 250 MYG-10D431K 275 350 430(387-473 710 25 2500 1250 45 0.4 230 MYG-10D471K 300 385 470(423-517 775 25 2500 1250 45 0.4 210 MYG-10D511K 320 415 510(459-561 845 25 2500 1250 45 0.4 190 MYG-10D561K 350 460 560(504-616 925 25 2500 1250 45 0.4 130 MYG-10D621K 385 505 620(558-682 1025 25 2500 1250 45 0.4 130 MYG-10D681K 420 560 680(612-748 1120 25 2500 1250 45 0.4 150 MYG-10D751K 460 615 750(675-825 1240 25 2500 1250 50 0.4 120 MYG-10D781K 485 640 780(702-858 1290 25 2500 1250 50 0.4 120 MYG-10D821K 510 670 820(738-902 1355 25 2500 1250 55 0.4 110 MYG-10D911K 550 745 910(819-1001 1500 25 2500 1250 60 0.4 100 MYG-10D102K 625 825 1000(900-1100 1650 25 2500 1250 65 0.4 90 MYG-10D112K 680 895 1100(990-1210 1815 25 2500 1250 70 0.4 80 MYG-14D180K 11 14 18(16-20 36 10 1000 500 3.5 0.10 18000 MYG-14D220K 14 18 22(20-24 43 10 1000 500 4.0 0.10 15000 MYG-14D270K 17 22 27(24-30 53 10 1000 500 5.0 0.10 10000 MYG-14D330K 20 26 33(30-36 65 10 1000 500 6.0 0.10 7500 MYG-14D390K 25 31 39(35-43 77 10 1000 500 7.0 0.10 6500 MYG-14D470K 30 38 47(42-52 93 10 1000 500 8.5 0.10 5500 MYG-14D560K 35 45 56(50-62 110 10 1000 500 10 0.10 4500MYG-14D680K 40 56 68(61-75 135 10 1000 500 12 0.10 3300 MYG-14D820K 50 65 82(74-90 135 50 4500 2500 14 0.60 2900 MYG-14D101K 60 85 100(90-110 165 50 4500 2500 18 0.60 2400 MYG-14D121K 75 100 120(108-132 200 50 4500 2500 20 0.60 1900 MYG-14D151K 95 125 150(135-165 250 50 4500 2500 25 0.60 1500 MYG-14D181K 115 150 180(162-198 300 50 4500 2500 30 0.60 1300 MYG-14D201K 130 170 200(185-225 340 50 4500 2500 35 0.60 1000 MYG-14D221K 140 180 220(198-242 360 50 4500 2500 40 0.60 900 MYG-14D241K 150 200 240(216-264 395 50 4500 2500 40 0.60 830 MYG-14D271K 175 225 270(243-297 455 50 4500 2500 50 0.60 750 MYG-14D301K 190 250 300(270-330 500 50 4500 2500 55 0.60 670 MYG-14D331K 210 275 330(297-363 550 50 4500 2500 60 0.60 650 MYG-14D361K 230 300 360(324-396 595 50 4500 2500 65 0.60 550 MYG-14D391K 250 320 390(351-429 650 50 4500 2500 700.60 500 MYG-14D431K 275 350 430(387-473 710 50 4500 2500 75 0.60 450 MYG-14D471K 300 385 470(423-517 775 50 4500 2500 80 0.60 400 MYG-14D511K 320 415 510(459-561 845 50 4500 2500 80 0.60 350 MYG-14D561K 350 460 560(504-616 925 50 4500 2500 80 0.60 300 MYG-14D621K 385 505 620(558-682 1025 50 4500 2500 85 0.60 250 MYG-14D681K 420 560 680(612-748 1120 50 4500 2500 90 0.60 250 MYG-14D751K 460 615 750(675-825 1240 50 4500 2500 100 0.60 230 MYG-14D781K 485 640 780(702-858 1290 50 4500 2500 105 0.60 230 MYG-14D821K 510 670 820(738-902 1355 50 4500 2500 110 0.60 200 MYG-14D911K 550 745 910(819-1001 1500 50 4500 2500 120 0.60 180 MYG-14D102K 625 825 1000(900-1100 1650 50 4500 2500 130 0.60 150 MYG-14D112K 680 895 1100(990-1210 1815 50 4500 2500 140 0.60 150 MYG-20D180K 11 14 18(16-20 36 20 2000 1000 10 0.20 37000 MYG-20D220K 14 18 22(20-24 43 20 2000 1000 13 0.20 30000 MYG-20D270K 17 22 27(24-30 53 20 2000 1000 15 0.20 22000 MYG-20D330K 20 26 33(30-36 65 20 2000 1000 20 0.20 17000 MYG-20D390K 25 31 39(35-43 77 20 2000 1000 24 0.20 15000 MYG-20D470K 30 38 47(42-52 93 20 2000 1000 30 0.20 13000 MYG-20D560K 35 45 56(50-62 110 20 2000 1000 35 0.20 11000 MYG-20D680K 40 56 68(61-75 135 20 2000 1000 40 0.20 7000 MYG-20D820K 50 65 82(74-90 135 100 6500 4000 27 1.00 5500 MYG-20D101K 60 85 100(90-110 165 100 6500 4000 30 1.00 4800 MYG-20D121K 75 100 120(108-132 200 100 6500 4000 40 1.00 3800 MYG-20D151K 95 125 150(135-165 250 100 6500 4000 50 1.00 3000 MYG-20D181K 115 150 180(162-198 300 100 6500 4000 60 1.00 2500 MYG-20D201K 130 170 200(185-225 340 100 6500 4000 70 1.00 2000 MYG-20D221K 140 180 220(198-242 360 100 6500 4000 75 1.00 2000 MYG-20D241K 150 200240(216-264 395 100 6500 4000 80 1.00 1800 MYG-20D271K 175 220 270(243-297 455 100 6500 4000 90 1.00 1600 MYG-20D301K 190 250 300(270-330 500 100 6500 4000 105 1.00 1400 MYG-20D331K 210 275 330(297-363 550 100 6500 4000 120 1.00 1200 MYG-20D361K 230 300 360(324-396 595 100 6500 4000 130 1.00 1000 MYG-20D391K 250 320 390(351-429 650 100 6500 4000 140 1.00 900MYG-20D431K 275 350 430(387-473 710 100 6500 4000 150 1.00 900 MYG-20D471K 300 385 470(423-517 775 100 6500 4000 150 1.00 800 MYG-20D511K 320 415 510(459-561 845 100 6500 4000 150 1.00 700 MYG-20D561K 350 460 560(504-616 925 100 6500 4000 150 1.00 500 MYG-20D621K 385 505 620(558-682 1025 100 6500 4000 160 1.00 460 MYG-20D681K 420 560 680(612-748 1120 100 6500 4000 175 1.00 420 MYG-20D751K 460 615 750(675-825 1240 100 6500 4000 180 1.00 420 MYG-20D781K 480 640 780(702-858 1290 100 6500 4000 190 1.00 400 MYG-20D821K 510 670 820(738-902 1355 100 6500 4000 215 1.00 350 MYG-20D911K 550 745 910(819-1001 1500 100 6500 4000 230 1.00 320 MYG-20D102K 625 8251000(900-1100 1650 100 6500 4000 250 1.00 300 MYG-20D112K 680 895 1100(990-1210 1815 100 6500 4000 400 1.00 200。
BV100技术手册
本手册的适用范围: 1. 如何安装 BV100，. 2. 如何维护 BV100.
注意事项: • 请注意 BV100 的使用环境要求. • 请不要润滑 BV100，否则会影响 BV100 的运转 • 请不要对光学透镜打磨. • 如果 BV100 被拆开 维护，需要重新效验和重新初始化。
Page 3 of 11
BV100 操作手册 GA717-1
1. 介绍
注意事项： • BV 100 需要与 3A 的保险丝配合使用 • BV 100 与 NV7/8/9/10 完全兼容 BV100 带来了一些新的应用与使用技巧，我们建议您详细阅读本手册，如果您有任何问题，请按照以 下联系方式联络我们
Innovative Technology Ltd. 中国代表处 深圳市福田区福田中路江苏大厦 B 栋 1312 室 Zip： 518026 电话：0755－25310169 传真：0755－25310119 手机： 13609627427 邮件： swang@ 网址:
低电平 0V To +0.5V
0.6V 50mA
表格 3 -接口电平
高电平 +3.7 V +12V 主控板的上拉电平
Page 4 of 11
®
© Copyright Innovative Technology Limited 2007
BV100 操作手册 GA717-1
4. 简要描述
BV100是新一代的高性价比纸币器 (如 图 1), 可以广泛地应用在多领域. 在串口模式下，BV100可以接 收16个通道的货币
®
© Copyright Innovative Technology Limited 2007
电流，电压
BAO100中文资料
Broadband TelCom Power, Inc.BTCPower BTCPowerTMRedefining “Current” Limits In Power ConversionBAO100 Series100W Open Frame AC-DC Power Modules with PFC• Universal Input 90-264 Vac • PFC function • PCB Mountable• Efficiency to 85% Typical • Industry Standard Pin Out • 100 % full load burn-in test• ISO-9001 certified manufacturer•Short circuit / overload / over voltage protection• Approvals: UL / TUV / CESpecificationsInput voltage range………………………………………………………………..90-264 Vac Input frequency………….…………………………………………………………47 – 63 HzInrush current………………………………………………………………………Cold start, 25A / 155Vac, 50A / 230Vac Output voltage….…………………………………………………………………..Refer to below table Initial Accuracy ………………………………………………………………….. ±1.0% max. Temperature Coefficient ………………………………………………………….±0.05% / ºCRipple & Noise, 20Mhz BW ………………………………………….…………. 50mVp -p, max @ 3.3/5Vo; 1%p-p,max @ other output voltage modules Hold-up time ¹ ……………………………………………………………………..8ms typ. Short circuit protection……………...………………………………………….…Continuous Line regulation ² .………………………………………………………………….±0.05% max. Load regulation ³ …………………………………………………………….……±1.0% max.Efficiency ………..…..…………………………………………………………….Refer to below table Isolation Voltage (Input/Output) ………………………………………………...4242 Vac Operating temp. range ……………………………………………………….…..0 ºC – 40 ºC Storage temp. range ………………………..……………………………………-20 ºC – +85 ºC Cooling………………………………………………………………………………Free air convectionPart NoOutputToleranceRipple (max.)EfficiencyBAO100- PAC-5 5V, 20A +/ - 1 % 50 mV 75% BAO100- PAC-9 9V, 11.2A +/ - 1 % 90 mV 79% BAO100- PAC-12 12V, 8.4A +/ - 1 % 120 mV 83% BAO100- PAC-15 15V, 6.7A +/ - 1 % 150 mV 85% BAO100- PAC-18 18V, 5.6A +/ - 1 % 180 mV 86% BAO100- PAC-24 24V, 4.2A +/ - 1 % 240 mV 87% BAO100- PAC-48 48V, 2.1A+/ - 1 %480 mV87%元器件交易网BTCPower BTCPowerT MBroadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Pg. 2.Tel.: 714-259-4888 • Fax: 714-259-0840 • • Email: sales@ AC/DC BAO100 PS Ver1 5-7-04Note:1. Measured at Vin = 115 Vac, Full load2. Measured from high line to low line3. Measured from full load to 10% load4. BAO100 input connector mates with Molex 5277 or equivalent.5. BAO100 output connector mates with Molex 5273 or equivalent.MECHANICAL DRAWINGDC output pin 1,2,3,4: Vo (+) DC output pin 5,6,7,8: Vo (-)元器件交易网。
MOTOROLA Semiconductor MMBTH10LT1 数据手册
VHF/UHF TransistorNPN SiliconMAXIMUM RATINGSRatingSymbol Value Unit Collector–Emitter Voltage V CEO 25Vdc Collector–Base Voltage V CBO 30Vdc Emitter–Base VoltageV EBO3.0VdcDEVICE MARKINGMMBTH10LT1 = 3EMTHERMAL CHARACTERISTICSCharacteristicSymbol Max Unit Total Device Dissipation FR-5 Board (1)T A = 25°CDerate above 25°CP D2251.8mW mW/°C Thermal Resistance Junction to Ambient R θJA 556°C/W Total Device DissipationAlumina Substrate, (2) T A = 25°C Derate above 25°CP D3002.4mW mW/°C Thermal Resistance Junction to Ambient R θJA 417°C/W Junction and Storage TemperatureT J , T stg–55 to +150°CELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted)CharacteristicSymbolMinTypMaxUnitOFF CHARACTERISTICSCollector–Emitter Breakdown Voltage (I C = 1.0 mAdc, I B = 0)V (BR)CEO 25——Vdc Collector–Base Breakdown Voltage (I C = 100 µAdc, I E = 0)V (BR)CBO 30——Vdc Emitter–Base Breakdown Voltage (I E = 10 µAdc, I C = 0)V (BR)EBO 3.0——Vdc Collector Cutoff Current (V CB = 25 Vdc, I E = 0)I CBO ——100nAdc Emitter Cutoff Current (V EB = 2.0 Vdc, I C = 0)I EBO——100nAdc1.FR–5 = 1.0 x 0.75 x 0.062 in.2.Alumina = 0.4 x 0.3 x 0.024 in. 99.5% aluminaThermal Clad is a registered trademark of the Berquist Company.Preferred devices are Motorola recommended choices for future use and best overall value.Order this document by MMBTH10LT1/DMOTOROLA SEMICONDUCTOR TECHNICAL DATAMMBTH10LT1CASE 318-08, STYLE 6SOT-23 (TO-236AB)123Motorola Preferred DeviceCOLLECTOR31BASE2EMITTER查询MMBTH10LT1供应商MMBTH10LT1ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted) (Continued)CharacteristicSymbolMinTypMaxUnitON CHARACTERISTICSDC Current Gain (I C = 4.0 mAdc, V CE = 10 Vdc)h FE 60———Collector–Emitter Saturation Voltage (I C = 4.0 mAdc, I B = 0.4 mAdc)V CE(sat)——0.5Vdc Base–Emitter On Voltage (I C = 4.0 mAdc, V CE = 10 Vdc)V BE——0.95VdcSMALL–SIGNAL CHARACTERISTICSCurrent–Gain – Bandwidth Product(I C = 4.0 mAdc, V CE = 10 Vdc, f = 100 MHz)f T 650——MHz Collector–Base Capacitance(V CB = 10 Vdc, I E = 0, f = 1.0 MHz)C cb ——0.7pF Common–Base Feedback Capacitance (V CB = 10 Vdc, I E = 0, f = 1.0 MHz)C rb ——0.65pF Collector Base Time Constant(I C = 4.0 mAdc, V CB = 10 Vdc, f = 31.8 MHz)rb ′C c——9.0psTYPICAL CHARACTERISTICS600f, FREQUENCY (MHz)Figure 1. Rectangular Form g ib (mmhos)Figure 2. Polar Formf, FREQUENCY (MHz)Figure 3. Rectangular Form g fb (mmhos)Figure 4. Polar Form706050100–10020406008010070605040302006030201010305070–1010200300400500700100080–20–30–40–50–60403020–20–30504010020030040050070010000–10–20–3030201040706050b fb–g fb1002004007001000 MHz1000 MHz 100200400700g ib–b ibj b (m m h o s )i b j b (m m h o s )f b , F O R W A R D T R A N S F E R A D M I T T A N C E (m m h o s ), I N P U T A D M I T T A N C E (m m h o s )i b y fb , FORWARD TRANSFER ADMITTANCECOMMON–BASE y PARAMETERS versus FREQUENCY(V CB = 10 Vdc, I C = 4.0 mAdc, T A = 25°C)y ib , INPUT ADMITTANCEi b y yMMBTH10LT1TYPICAL CHARACTERISTICSf, FREQUENCY (MHz)Figure 5. Rectangular Formg rb (mmhos)Figure 6. Polar Formf, FREQUENCY (MHz)Figure 7. Rectangular Form g ob (mmhos)Figure 8. Polar Form2.04.0 6.08.010–2.0–1.2–0.40.40–5.01.22.0104.02.00–1.8–0.800.81.68.06.0–4.0–3.0–2.0–1.01004.03.01.0020030040050070010005.0100200300400500700100003.02.01.04.07.06.05.0109.08.02.0b obg ob–b rb–b rb–g rbMPS H11MPS H101002004007001000 MHz1002004007001000 MHzj b (m m h o s )r b j b (m m h o s )o b , O U T P U T A D M I T T A N C E (m m h o s )o b , R E V E R S E T R A N S F E R A D M I T T A N C E (m m h o s )r b y ob , OUTPUT ADMITTANCECOMMON–BASE y PARAMETERS versus FREQUENCY(V CB = 10 Vdc, I C = 4.0 mAdc, T A = 25°C)y rb , REVERSE TRANSFER ADMITTANCEy yMMBTH10LT1INFORMATION FOR USING THE SOT–23 SURFACE MOUNT PACKAGEMINIMUM RECOMMENDED FOOTPRINT FOR SURFACE MOUNTED APPLICATIONSSurface mount board layout is a critical portion of the total design. The footprint for the semiconductor packages must be the correct size to insure proper solder connection interface between the board and the package. With the correct pad geometry, the packages will self align when subjected to a solder reflow process.SOT–23mm inches0.037 0.950.037 0.95 0.079 2.00.0350.90.0310.8SOT–23 POWER DISSIPATION The power dissipation of the SOT–23 is a function of thedrain pad size. This can vary from the minimum pad size forsoldering to a pad size given for maximum power dissipation.Power dissipation for a surface mount device is determinedby T J(max), the maximum rated junction temperature of thedie, RθJA, the thermal resistance from the device junction toambient, and the operating temperature, T A. Using thevalues provided on the data sheet for the SOT–23 package,P D can be calculated as follows:P D =T J(max) – T A RθJAThe values for the equation are found in the maximum ratings table on the data sheet. Substituting these values into the equation for an ambient temperature T A of 25°C, one can calculate the power dissipation of the device which in this case is 225 milliwatts.P D =150°C – 25°C556°C/W= 225 milliwattsThe 556°C/W for the SOT–23 package assumes the use of the recommended footprint on a glass epoxy printed circuit board to achieve a power dissipation of 225 milliwatts. There are other alternatives to achieving higher power dissipation from the SOT–23 package. Another alternative would be to use a ceramic substrate or an aluminum core board such as Thermal Clad™. Using a board material such as Thermal Clad, an aluminum core board, the power dissipation can be doubled using the same footprint.SOLDERING PRECAUTIONSThe melting temperature of solder is higher than the rated temperature of the device. When the entire device is heated to a high temperature, failure to complete soldering within a short time could result in device failure. Therefore, the following items should always be observed in order to minimize the thermal stress to which the devices are subjected.•Always preheat the device.•The delta temperature between the preheat and soldering should be 100°C or less.*•When preheating and soldering, the temperature of the leads and the case must not exceed the maximum temperature ratings as shown on the data sheet. When using infrared heating with the reflow soldering method, the difference shall be a maximum of 10°C.•The soldering temperature and time shall not exceed 260°C for more than 10 seconds.•When shifting from preheating to soldering, the maximum temperature gradient shall be 5°C or less.•After soldering has been completed, the device should be allowed to cool naturally for at least three minutes.Gradual cooling should be used as the use of forced cooling will increase the temperature gradient and result in latent failure due to mechanical stress.•Mechanical stress or shock should not be applied during cooling.*Soldering a device without preheating can cause excessive thermal shock and stress which can result in damage to the device.MMBTH10LT1PACKAGE DIMENSIONSCASE 318–08ISSUE AFSOT–23 (TO–236AB)STYLE 6:PIN 1.BASE2.EMITTER3.COLLECTORDJKLA CB SHGV 312DIM A MIN MAX MIN MAX MILLIMETERS 0.11020.1197 2.80 3.04INCHES B 0.04720.0551 1.20 1.40C 0.03500.04400.89 1.11D 0.01500.02000.370.50G 0.07010.0807 1.78 2.04H 0.00050.00400.0130.100J 0.00340.00700.0850.177K 0.01400.02850.350.69L 0.03500.04010.89 1.02S 0.08300.1039 2.10 2.64V0.01770.02360.450.60NOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: INCH.3.MAXIUMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL.MMBTH10LT1Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.Mfax is a trademark of Motorola, Inc. How to reach us:USA/EUROPE/Locations Not Listed: Motorola Literature Distribution;JAPAN: Nippon Motorola Ltd.; T atsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–24473–14–2 T atsumi Koto–Ku, T okyo 135, Japan. 81–3–3521–8315Mfax™: RMFAX0@– TOUCHTONE 602–244–6609ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B T ai Ping Industrial Park,– US & Canada ONLY 1–800–774–184851 Ting Kok Road, T ai Po, N.T., Hong Kong. 852–26629298INTERNET: /sps。
ina 101
SPECIFICATIONSELECTRICALAt +25°C with ±15VDC power supply and in circuit of Figure 1, unless otherwise noted.INA101AM, AG INA101SM, SG INA101CM, CG INA101HP, KUPARAMETER MIN TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX UNITS GAINRange of Gain11000******V/V Gain Equation G = 1 + (40k/R G)***V/V Error from Equation, DC(1)±(0.04 + 0.00016G±(0.1 + 0.0003G****±(0.1 +±(0.3 +%–0.02/G)–0.05/G) 0.00015G) 0.0002G)–0.05/G–0.10/GGain Temp. Coefficient(3)G = 125******ppm/°CG = 1020100**10***ppm/°CG = 10022110**11***ppm/°CG = 100022110**11***ppm/°C Nonlinearity, DC(2)±(0.002 + 10–5 G)±(0.005 + 2 x 10–5 G)±(0.001±(0.002±(0.001±(0.002**% of p-p FS+10–5 G)+10–5 G)+10–5 G)+10–5 G)RATED OUTPUTVoltage±10±12.5******V Current±5±10******mA Output Impedance0.2***ΩCapacitive Load1000***pF INPUT OFFSET VOLTAGEInitial Offset at +25°C±(25 + 200/G)±(50 + 400/G)±10+±(25±(10+±(25 +±(125 +±(250 +µV100/G)+200/G)100/G)200/G)450/G)900/G) vs Temperature±(2 + 20/G)±(0.75±(0.25 +±(2 + 20/G)µV/°C+ 10/G)10/G)vs Supply±(1 + 20/G)***µV/V vs Time±(1 + 20/G)***µV/mo INPUT BIAS CURRENTInitial Bias Current(each input)±15±30±10*±5±20**nA vs Temperature±0.2***nA/°C vs Supply±0.1***nA/V Initial Offset Current±15±30±10*±5±20**nA vs Temperature±0.5***nA/°C INPUT IMPEDANCEDifferential1010 || 3***Ω || pF Common-mode1010 || 3***Ω || pF INPUT VOLTAGE RANGERange, Linear Response±10±12******V CMR with 1kΩ Source ImbalanceDC to 60Hz, G = 18090****6585dB DC to 60Hz, G = 1096106****9095dB DC to 60Hz, G = 100 to 1000106110****100105dB INPUT NOISEInput Voltage Noisef B = 0.01Hz to 10Hz0.8***µV, p-p Density, G = 1000f O = 10Hz18***nV/√Hzf O = 100Hz15***nV/√Hzf O = 1kHz13***nV/√Hz Input Current Noisef B = 0.01Hz to 10Hz50***pA, p-p Densityf O = 10Hz0.8***pA/√Hzf O = 100Hz0.46***pA/√Hzf O = 1kHz0.35***pA/√Hz DYNAMIC RESPONSESmall Signal, ±3dB FlatnessG = 1300***kHzG = 10140***kHzG = 10025***kHzG = 1000 2.5***kHz Small Signal, ±1% FlatnessG = 120***kHzG = 1010***kHzG = 1001***kHzG = 1000200***Hz Full Power, G = 1 to 100 6.4***kHz Slew Rate, G = 1 to 1000.20.4******V/µs Settling Time (0.1%)G = 13040******µsG = 1004055******µsG = 1000350470******µs Settling Time (0.01%)G = 13045******µsG = 1005070******µsG = 1000500650******µs POWER SUPPLYRated Voltage±15***V Voltage Range±5±20******V Current, Quiescent(2)±6.7±8.5******mA TEMPERATURE RANGE(5)Specification–25+85–55+125**0+70°C Operation–55+125****–25+85°C Storage–65+150****–40+85°CPIN CONFIGURATIONSORDERING INFORMATIONPRODUCT PACKAGE TEMPERATURE RANGEINA101AM 10-Pin Metal TO-100–25°C to +85°C INA101CM 10-Pin Metal TO-100–25°C to +85°C INA101AG 14-Pin Ceramic DIP –25°C to +85°C INA101CG 14-Pin Ceramic DIP –25°C to +85°C INA101HP 14-Pin Plastic DIP 0°C to +70°C INA101KU SOL-16 Surface-Mount 0°C to +70°C INA101SG 14-Pin Ceramic DIP –55°C to +125°C INA101SM10-Pin Metal TO-100–55°C to +125°CABSOLUTE MAXIMUM RATINGSSupply Voltage...................................................................................±20V Power Dissipation ..........................................................................600mW Input Voltage Range ..........................................................................±V CC Output Short Circuit (to ground)...............................................Continuous Operating Temperature M, G Package...........................–55°C to +125°C P, U Package.................................................................–25°C to +85°C Storage Temperature M, G Package ..............................–65°C to +150°C P, U Package.................................................................–40°C to +85°C Lead Temperature (soldering, 10s) M, G, P Package ...................+300°C Lead Temperature (wave soldering, 3s) U Package......................+260°CPACKAGE INFORMATIONPACKAGE DRAWINGPRODUCT PACKAGE NUMBER (1)INA101AM 10-Pin Metal TO-100007INA101CM 10-Pin Metal TO-100007INA101AG 14-Pin Ceramic DIP 169INA101CG 14-Pin Ceramic DIP 169INA101HP 14-Pin Plastic DIP 010INA101KU SOL-16 Surface-Mount 211INA101SG 14-Pin Ceramic DIP 169INA101SM10-Pin Metal TO-100007NOTE: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix D of Burr-Brown IC Data Book.The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change This integrated circuit can be damaged by ESD. Burr-Brown recommends that all integrated circuits be handled with ap-propriate precautions. Failure to observe proper handling and installation procedures can cause damage.ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.STEP RESPONSETime (µs)O u t p u t (V )+10+50–5–10100200300400500600QUIESCENT CURRENT vs SUPPLYSupply Voltage (V)Q u i e s c e n t C u r r e n t (m A )±9±8±7±6±5±5±10±15±20WARM-UP DRIFT vs TIMETime (Minutes)C h a n g e i n I n p u t O f f s e t V o l t a g e (µV )010864212345CMR vs FREQUENCYFrequency (Hz)C M R (d B )11201008060101001k10kGAIN vs FREQUENCYFrequency (Hz)G a i n (d B )1006040201k10k 100k1MGAIN NONLINEARITY vs GAINGain (V/V)G a i n N o n l i n e a r i t y (% p -p , F S )11001000100.010.0030.0010.0003TYPICAL PERFORMANCE CURVESAt +25°C, V CC = ±15V unless otherwise noted.INPUT NOISE VOLTAGEvs FREQUENCY (100 ≤ GAIN ≤ 1000)Frequency (Hz)I n p u t N o i s e V o l t a g e (n V /√H z )1000100101101001000OUTPUT NOISE vs GAINGain (V/V)O u t p u t N o i s e V o l t a g e (m V, r m s )3020100101001000SETTLING TIME vs GAINGain (V/V)S e t t l i n g T i me (µs )1100100010100010010(1)G = 1 +TYPICAL PERFORMANCE CURVES (CONT)At +25°C, V CC = ±15V unless otherwise noted.40k ΩR APPLICATION INFORMATIONFigure 1 shows the basic connections required for operation of the INA101. (Pin numbers shown are for the TO-100metal package.) Applications with noisy or high impedance power supplies may require decoupling capacitors close to the device pins as shown.The output is referred to the output Common terminal which is normally grounded. This must be a low-impedance con-nection to assure good common-mode rejection. A resis-tance greater than 0.1Ω in series with the Common pin will cause common-mode rejection to fall below 106dB.SETTING THE GAINGain of the INA101 is set by connecting a single external resistor, R G :The 40k Ω term in equation (1) comes from the sum of the two internal feedback resistors. These are on-chip metal film resistors which are laser trimmed to accurate absolute val-ues. The accuracy and temperature coefficient of these resistors are included in the gain accuracy and drift specifi-cations of the INA101.The stability and temperature drift of the external gain setting resistor, R G , also affects gain. R G ’s contribution to gain accuracy and drift can be directly inferred from the gain equation (1). Low resistor values required for high gain can make wiring resistance important. Sockets add to the wiring resistance which will contribute additional gain error (possi-bly an unstable gain error) in gains of approximately 100 or greater. The gain sense connections on the DIP and SOL-16packages (see Figure 2) reduce the gain error produced by wiring or socket resistance.OFFSET TRIMMINGThe INA101 is laser trimmed for low offset voltage and drift. Most applications require no external offset adjust-ment. Figure 2 shows connection of an optional potentio-meter connected to the Offset Adjust pins for trimming the input offset voltage. (Pin numbers shown are for the DIP package.) Use this adjustment to null the offset voltage in high gain (G ≥ 100) with both inputs connected to ground. Do not use this adjustment to null offset produced by the source or other system offset since this will increase the offset voltage drift by 0.3µV/°C per 100µV of adjusted offset.Offset of the output amplifier usually dominates when the INA101 is used in unity gain (G = 1). The output offset voltage can be adjusted with the optional trim circuit con-nected to the Common pin as shown in Figure 2. The voltage applied to Common terminal is summed with the output. Low impedance must be maintained at this node to assure good common-mode rejection. The op amp connected as a buffer provides low impedance.THERMAL EFFECTS ON OFFSET VOLTAGETo achieve lowest offset voltage and drift, prevent air currents from circulating near the INA101. Rapid changes in temperature will produce a thermocouple effect on the package leads that will degrade offset voltage and drift. A shield or cover that prevents air currents from flowing near the INA101 will assure best performance.PACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)INA101AG NRND CDIP SB JD141Green(RoHS&no Sb/Br)AU N/A for Pkg TypeINA101AM NRND TO-100LME1020Green(RoHS&no Sb/Br)AU N/A for Pkg Type INA101AM2OBSOLETE TO-100LME10TBD Call TI Call TIINA101CM NRND TO-100LME10100Green(RoHS&no Sb/Br)AU N/A for Pkg Type INA101CM1OBSOLETE TO-100LME10TBD Call TI Call TIINA101HP ACTIVE PDIP N1425Green(RoHS&no Sb/Br)CU NIPDAU N/A for Pkg TypeINA101HPG4ACTIVE PDIP N1425Green(RoHS&no Sb/Br)CU NIPDAU N/A for Pkg TypeINA101KU ACTIVE SOIC DW1640Green(RoHS&no Sb/Br)CU NIPDAU Level-3-260C-168HRINA101KU/1K ACTIVE SOIC DW161000Green(RoHS&no Sb/Br)CU NIPDAU Level-3-260C-168HRINA101KU/1KE4ACTIVE SOIC DW161000Green(RoHS&no Sb/Br)CU NIPDAU Level-3-260C-168HRINA101KUE4ACTIVE SOIC DW1640Green(RoHS&no Sb/Br)CU NIPDAU Level-3-260C-168HR INA101SG1OBSOLETE TO-100LME10TBD Call TI Call TIINA101SM NRND TO-100LME1020Green(RoHS&no Sb/Br)AU N/A for Pkg Type(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS),Pb-Free(RoHS Exempt),or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free(RoHS Exempt):This component has a RoHS exemption for either1)lead-based flip-chip solder bumps used between the die and package,or2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free(RoHS compatible)as defined above.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.TAPE AND REEL INFORMATION*All dimensions are nominalDevicePackage Type Package Drawing Pins SPQReel Diameter (mm)Reel Width W1(mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant INA101KU/1K SOICDW161000330.016.410.8510.8 2.712.016.0Q1*All dimensions are nominalDevice Package Type Package Drawing Pins SPQ Length(mm)Width(mm)Height(mm) INA101KU/1K SOIC DW161000346.0346.033.0IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements,improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right, or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI.Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use any non-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements.Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers AudioData Converters AutomotiveDLP®Products BroadbandDSP Digital ControlClocks and Timers MedicalInterface MilitaryLogic Optical NetworkingPower Mgmt SecurityMicrocontrollers TelephonyRFID Video&ImagingRF/IF and ZigBee®Solutions WirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2009,Texas Instruments Incorporated。
BP-10-0001C ver5.0
1.目的通过对员工的培训，巩固和提高员工的知识、技能和观念，不断满足公司和岗位发展的要求。
2.范畴适用于公司根据工作需要为员工提供的各类培训。
3.定义3.1入职培训与在职培训3.1.1入职培训：指新员工入职时为帮助新员工了解公司企业文化、制度及运作，熟悉工作环境的培训。
3.1.1.1间接员工的入职培训：包括公司介绍，艾科泰价值观，组织结构，人事管理规范，质量政策，质量意识，文件控制，5S，ESD准则，安全与环保等综合基础知识介绍。
3.1.1.2直接员工的入职培训：人力资源部负责在直接员工入职时安排基础培训。
培训包括：综合基础知识介绍和产品线相关基础知识。
培训结束后，员工须通过培训中心组织的考试。
对于考试不合格的新员工，培训中心将安排一次补考。
若第二次考试仍不合格，培训中心将其退回人力资源部依照公司人事规章制度处理。
3.1.2在职培训：员工入职或职位变动后，为帮助员工满足公司及岗位需求而进行的培训。
3.1.2.1间接员工的在职培训参考“培训指引-直接员工在职培训及岗位认证”实施3.1.2.2各部门经理应依据岗位能力规划为新入职员制定试用期内个人培训计划，以使该员工迅速适应公司运作要求。
(职员适应职务调整时的培训计划同此)3.2内部培训与外部培训内部培训：指利用本公司内部资源举行的各类培训。
外部培训：指利用本公司外部资源举行的各类培训。
4职责与程序流程图4.1培训与发展主管4.1.1负责协调、组织新入职员工的入职培训。
4.1.2负责协调各相关部门负责人员推行在职培训。
4.1.3负责进行培训需求分析，制定《年度培训计划》和《月度培训计划》，推行培训计划，跟进及协调相关人员评估培训效果。
4.1.4保存相关培训记录。
除生产线操作工的上岗认证培训记录外，其余培训记录由人力资源部负责保存。
4.2各部门经理或相关责任人员4.2.1负责从员工合适的教育、培训、技能和经历等方面判断从事影响产品质量工作的人员的能力，根据业务发展需求，确定本部门培训内容，合理安排员工参加培训，并负责组织、实施和协调在职专业技能培训。
PM6C-1001A
1CT:1CT
22 MX121 MCT2 20 MX2+
TD1- 3 TCT2 4 TD2+ 5
1CT:1CT
22 MX121 MCT2 20 MX2+
TD2- 6 TCT3 7 TD3+ 8
1CT:1CT
19 MX218 MCT3 17 MX3+
TD2- 6 TCT3 7 TD3+ 8
1CT:1CT
13 MX4MX MX MEDIA SIDE MX MX
TD4- 12 LEGEND TD TD CHIP SIDE TD TD
13 MX4MX MX MEDIA SIDE MX MX
TEL: 86-755-88367400
FAX: 86-755-29625890 C-24
0.014 0.35
0.004/0.10 24 PIN SURFACES
Remarks:
0-8°
Dimension:Inches mm 0.01 Unless otherwise specified,all tolerances are:±0.25
TEL: 86-755-88367400
FAX: 86-755-29625890 C-23
Insertion Loss Return Loss DCMR (dB Max.) (dB Min.) (dB Min.) Part Number 1-100 1-30 40-50 60-80 100 30 60 100 MHz MHz MHz MHz MHz MHz MHz MHz PM6C-1001 1.0 -18 -16 -12 -10 -43 -37 -33 PM6C-1001A 1.0 -18 -16 -12 -10 -43 -37 -33 PM6C-1001J 1.0 -18 -16 -12 -10 -43 -37 -33 PM6C-1008 1.0 -18 -16 -12 -10 -43 -37 -33 PM6C-1009 1.0 -18 -16 -12 -10 -43 -37 -33 Note: 1. Test condition: Line Side Inductance 350 uH Min. @100KHz, 100mV with 8mA DC Bias 2. Test condition (PM6C-1001J) Operating temperature rang is -40 ℃ TO +85 ℃: