Aidex 2017 FAB LAB MAKER SPACE 规划指南说明书

2017
F AB L AB/
MAKE R SPAC E
pla nning g uide
• Input De vic e s
• 3D De sig n &
Pr e se nta tio n T o o ls
• He a t Pr e sse s
• C NC Ma c hine s
• R o ute r s
• 3D Pr inte r s
• L a se r E ng r a ve r s/Pr inte r s/C utte r s
• C usto m L a b E nvir o nm e nts
ABO UT US
F o r o ve r 12 ye a r s, Aid e x ha s p r o vid e d inno va tive , te c hno lo g y-b a se d e d uc a tio na l syste ms a nd p r o fe ssio na l r e so ur c e s to sc ho o ls, c o lle g e s, a nd unive r sitie s a c r o ss I llino is, I nd ia na , I o wa , K a nsa s, Misso ur i a nd Ne b r a ska. As o ne o f the mo st hig hly r e sp e c te d e d uc a tio n se r vic e p r o vid e r s in the ind ustr y, Aid e x o ffe r s c o mp le te tur nke y so lutio ns fo r ne w c o nstr uc tio n o r r e no va te d e d uc a tio n la b s, a s we ll a s c usto mize d te c hnic a l e q uip me nt tr a ining.
T o d a y’s te a c hing a nd le a r ning to o ls ha ve e xp a nd e d we ll b e yo nd the b la c kb o a r d. F r o m inte r a c tive multime d ia to p r o je c t-b a se d le a r ning. T e c hno lo g y is e na b ling e d uc a to r s to o ffe r d yna mic te a c hing ma te r ia ls, d e vo te mo r e time to c la ssr o o m d isc ussio n, a nd p r o vid e va lua b le ha nd s-o n le a r ning fo r stud e nts.
Aid e x ta ke s a multid isc ip lina r y a p p r o a c h to te c hnic a l e d uc a tio n so lutio ns to e nsur e id e a l le a r ning e nvir o nme nts tha t p r o vid e inte g r a te d ma th, sc ie nc e , te c hno lo g y, a nd ha nd s-o n p r o b le m so lving fo r stud e nts a t a ll e d uc a tio n le ve ls. T hr o ug h o ur ne two r k o f mo r e tha n 20
ma nufa c tur ing p a r tne r s, Aid e x p r o vid e s the mo st up -to -d a te c o ur se wo r k, la b o r a to r y e q uip me nt, tr a ining , a nd c usto me r se r vic e in a wid e r a ng e o f te c hnic a l e d uc a tio n p r o g r a ms fo r K -12 thr o ug h p o st-se c o nd a r y e d uc a tio n.
C O NT AC T S
Aide x C o r po r a tio n
58 E . So uth St, PO Bo x 388,
Ro ssville , I N 46065 T o ll F r e e : 800-251-9935 F a x: 815-230-7967 info @a id e x.c o m
L ynn C r o w ,
Pr e si de nt
C e ll: 765-414-3119
Office: 800-251-9935 Ext: 101E ma il: lynnc @a id e x.c o m
L a ur a C o a r d ,
I ndi a na S a l e s Re p r e se nta ti ve
C e ll: 269-313-1613
Office: 800-251-9935 Ext: 106E ma il: lc o a r d @a id e x.c o m
Je ff C a r r ,
T e c hni c a l S up p o r t
Office: 800-251-9935 Ext: 104E ma il: jc a r r @a id e x.c o m
T ABL E O F C
Wha t is a F a b L
C usto m F a b L a
Inte r a c tive 3D Pr
• AV R O VE R -3D AV R
3D De sig n & Pr e
• SO L IDWO R KS -
• NE XT WAVE AUT
• R O L AND -R O
He a t Pr e sse s
• HO T R O NIX -
• HO T R O NIX -
• HO T R O NIX -
C NC Ma c hine
• R O L AND -
• R O L AND -
• R O L AND -
• F ANUC -L
• DE NF O R D -
R o uter s
• NE XT WAVE
• NE XT WAVE
3D Pr inte r s
• AIR WO L F 3D -
• AIR WO L F 3D -
• AIR WO L F 3D -
• NE XT WAVE
• PR INT SPAC
L a se r E ng r a ve
• R O L AND -
• R O L AND -
• R O L AND -
• R O L AND -
• R O L AND -
• R O L AND -
• NE XT WAVE
C usto m L a b E
• INT E R IO R C
www.a id e x.c
Pro vid ing Ed uc a tio na l T e c hno lo g ie s fo r T o m o rro w’s Wo rkfo rc e www.a id e x.c o m
W h a t i s a F a b L a b
2
WHAT IS A F AB L AB?
Ma ke r sp a c e s ha ve b e e n c a lle d e ve r ything fr o m a F a b L a b to a T e c hsho p to a ha c ke r sp a c e. I s the r e a d iffe r e nc e b e twe e n the se na me s? Ye s a nd no. At the c o r e , the y a r e a ll p la c e s fo r ma king , c o lla b o r a ting , le a r ning a nd sha r ing. Altho ug h the se sp a c e s ha ve a lo t in c o mmo n, the y a r e a lso d iffe r e nt in a fe w wa ys. T o sta r t with, a F a b L a b a nd T e c hsho p a r e tr a d e ma r ke d na me s fo r a p a r tic ula r typ e o f ma ke r sp a c e. T he y a r e b o th g e ne r a lly sto c ke d with simila r typ e s o f ma ke r e q uip me nt like 3D p r inte r s, la se r c utte r s, C NC ma c hine s, ha nd to o ls e tc. O ne is g o ve r ne d b y a c o r p o r a tio n (T e c hsho p ) a nd the o the r a fo und a tio n (F a b F o und a tio n)
and each have their own specific rules and charters to follow.
Wha te ve r na me a n institutio n wa nts to g ive this typ e o f la b , whe the r it is a fo r ma l F a b L a b o r T e c hsho p , o r a la b c r e a te d fo r the ind ivid ua l institutio ns wa nts a nd ne e d s the y a ll ha ve so me fund a me nta l c ha r a c te r istic s. T his typ e o f p r o je c t le a r ning c r e a te s a n a tmo sp he r e o f inve ntive id e a s, te c hno lo g y b a se d le a r ning , e nc o ur a g e me nt, a nd fun. T he ha nd s-o n na tur e o f the la b itse lf a d d s to c la ssr o o m le a r ning. A b y-p r o d uc t o f the se typ e s o f la b s is the a b ility fo r institutio ns to use the m a s a r e so ur c e fo r e ve r y a sp e c t o f the sc ho o l. Ba nne r s, sc ho o l sig ns, a r ts, c o mmunic a tio ns, p r o mo tio na l ma te r ia ls, a nd muc h mo r e !
These work with components and materials optimized for use in the field, and are controlled with custom so ftwa r e fo r inte g r a te d d e sig n, ma nufa c tur ing , a nd p r o je c t ma na g e me nt.
5 ST E P P R O CE SS T O A SUCCE SSF UL , T UR N-KE Y L AB E NVI R O NME NT
1. Pr e lim ina r y Pla nning
• Pe r so na l Visit By O ur Sa le s So lutio ns Sp e c ia list
• De ta ile d I nfo r ma tio n - Pr ic ing , L ite r a tur e , E q uip me nt L ist
• Pr e se nta tio n to Administr a tio n, Sc ho o l b o a r d , T e a c he r s, e tc.
2. L a b De sig n
• Specific Lab Layout Assistance • Ro o m L a yo ut • F ur nitur e L a yo ut • E q uip me nt L a yo ut
• Electrical Specifications • Network Specifications
3. Insta lla tio n
• C o mp le te O n-Site De live r y • I nsta lla tio n o f the L a b
• Equipment Configuration • Ne two r k T e sting • So ftwa r e T e sting • L a b O r ie nta tio n
• I nve nto r y o f De live r e d I te ms
4. Pr o fe ssio na l De ve lo pm e nt
• T e a c he r Pr o fe ssio na l De ve lo p me nt
• Adva nc e d Pr o fe ssio na l De ve lo p me nt Se ssio ns • U se r s’ G r o up Me e ting s
5. Afte r Sa le Suppo r t
• Wa r r a nty & O ut-o f-Wa r r a nty Se r vic e • F ull T ime T e c hnic a l Sup p o r t Sta ff • O n-Site Se r vic e
• Ship p ing Assista nc e
• F r e e 800 Numb e r Sup p o r t • O n-L ine Sup p o r t • And Muc h Mo r e
F a b L a bs c a n ta ke o n m a ny va r ia tio ns o r c o m bina tio ns o f se ve r a l fo c us a r e a s:
• Ma nufa c tur ing • F a b r ic a tio n
• Ar ts & C o mmunic a tio n • Ra p id Pr o to typ ing
• F a mily & C o nsume r Sc ie nc e
Hig hlig hts o f type s o f pr o duc ts tha t c a n be inc o r po r a te d into the se la bs a r e :
• A p r o p e r L a b E nvir o nme nt • 3D Pr inte r s • 3D Sc a nne r s
• L a se r E ng r a ve r s/C utte r s • U V Pr inte r s • Vinyl Pr inte r /C utte r s
• Sub tr a c tive Pr o typ ing De vic e s • C NC Ro ute r s
• Pr o fe ssio na l De sig n So ftwa r e • He a t Pr e ss
www.a id e x.c C UST O M F A I R W O L F 3D
A x i o m D u a l
P R I N T S P A C E 3D
A l t a i r
R O L A N D
V e r s a U V L E F -12
M O N I T O R
Pro vid ing Ed uc a tio na l T e c hno lo g ie s fo r T o m o rro w’s Wo rkfo rc e www.a id e x.c o m
I n t e r a c t i v e 3D P r o j e c t o r S y s t e m
4
A V RO VER
3D AV R O VE R
C a ptur e the Minds a nd Im a g ina tio ns o f Yo ur Stude nts with 3D
T he 3D AVRo ve r inte g r a te s the b e st in ha r d wa r e , so ftwa r e , a nd c o nte nt fo r a tr uly r e ma r ka b le 3D le a r ning e xp e r ie nc e. Pr o ve n to inc r e a se te st sc o r e s a nd r e te ntio n b y a s muc h a s 33%, the 3D AVRo ve r is c e r ta in to insp ir e stud e nts a nd e nha nc e le sso ns.
E ve r ything Yo u Ne e d fo r a C o m ple te So lutio n
T he 3D AVRo ve r inc lud e s a 3D DL P Pr o je c to r , 3D C o mp ute r with 3D C o nte nt, 3 b uilt in sp e a ke r s, mixe r
amplifier with microphone input as well as XLR out, laptop connections, 2 locking storage drawers, r e tr a c ta b le p o we r c o r d , he a vy d uty c a ste r s, a nd muc h mo r e.
E a sy to Use
Br ing ing le sso ns to life is e a sy with the 3D AVRo ve r . Simp ly p lug yo ur syste m in, tur n it o n, a nd yo u ha ve the hig he st q ua lity 3D vid e o s, inte r a c tive o b je c ts, a nd vir tua l simula tio ns fo r yo ur who le c la ss to e njo y.
T e a c h Whe r e Yo u Wa nt, the Wa y Yo u Wa nt
• Mo st C o mp r e he nsive 3D L ib r a r y • Ad va nc e d 3D C o mp ute r Syste m • Pr o fe ssio na l so und syste m
• Ad justa b le ima g e size a nd he ig ht
AVR o ve r Ha s the L a r g e st R e po sito r y o f 3D E duc a tio na l C o nte nt. So m e o f O ur E duc a tio na l C o nte nt Inc lude s:
• Anim a tio ns - I nc lud ing a uniq ue b le nd o f 3D vid e o s, simula tio ns, e xp e r ime nts, le a r ning a c tivitie s, q uizze s, te xts, ima g e s, a nd le a r ning o b je c ts, o ur 3D Anima tio ns ha ve r e vo lutio nize d the wa y stud e nts a c r o ss the wo r ld und e r sta nd ke y c o nc e p ts in Ma th a nd Sc ie nc e inc lud ing Bio lo g y, Physic s a nd C he mistr y. • Inte r a c tive O bje c ts - 3D inte r a c tive o b je c ts inc lud e inc r e d ib ly d e ta ile d , inte r a c tive mo d e ls sp a nning the sub je c ts o f Bo ta ny, Huma n Ana to my, Zo o lo g y, Mic r o b io lo g y, C he mistr y a nd E ng ine e r ing. Stud e nts c a n e xp lo r e , d isse c t a nd ma nip ula te vir tua l 3D o b je c ts.• Vir tua l F r o g Disse c tio n - I mme r sive le a r ning a c tivitie s fe a tur ing ste p -b y-ste p instr uc tio ns, a fully inte r a c tive inte r fa c e , a nd e a sy to use to o ls. Stud e nts e ng a g e
in a c
o mp le te vir tua l 3D F r o g le a r ning e xp e r ie nc e inc lud ing d isse c tio n.
• T o ta lly se c ur e e ve n whe n in use • Sha r e a b le b e twe e n c la ssr o o ms • No se tup time
SO L IDWO RKS SO L IDWO
E DUC AT
PR O G R AM
T he So lid Wo r ks
Pr o g r a m o ffe r s yo suite o f 3D d e sig
millio ns o f d e sig
a c r o ss a
b r o a d
ind ustr ie s. With the
So lid Wo r ks use
a nd d e sig n c a
stud e nts will q
•C o nc e p tua
d e ta ile d d e
•Pr e c ise ly d o
a nd p a r ts lists •Run c o mp le
and verification •C r e a te d yna
illustr a tio ns fo
p r e se nta tio ns
•U se p r o d uc t d
ma na g e me student project files With the So lid Wo
Pr o g r a m, yo ur
fo c us o n id e a s, p
a nd inno va tio
ha ving to me mo
c o mma n
d s.
www.a id e x.c
Pro o m o rro w’s Wo rkfo rc e www.a id e x.c o m H
e
a
t
P
r
e
s
s
e
s
6
HO T RO NIX
AIR F USIO N
He
air-powered operation. The first
fully a
Ho
p
a
I d
vo
o
tha
d
p
a
fr
fo
p
T
se
printing a fleece sweatshirt or a
lig
Auto
a
thic
p
c
final application. With up to four
time
no
RO NIX
N
ne-o f-a-kind Ho tr o nix®
® o p e r a te s a s a d r a w o r
-style p r e ss, p r o vid ing a
e e wo r ksp a c e. T he swing
w fe a tur e g ive s 100%
ss to e ve r y inc h o f the 16”
we r p la te n, a llo wing fo r
r e c ise p la c e me nt a nd
ning r ig ht o n the p r e ss.
r yo u p r e fe r to d e c o r a te
d r a w o r swing p r
e ss,
tr o nix® F usio n® ha s yo u
r e d. I t’s like ha ving two
s in o ne. De p e nd ing
ur g a r me nt o r wo r k
nme nt, yo u c a n c ho o se
the up p e r p la te n a wa y
w o ut the lo we r p la te n.
wa y, yo u’ll a lwa ys ha ve a
e e wo r ksp a c e.
HO T RO NIX
AUT O O PE N C L AM
With a p a te nte d ma g ne tic a uto
o p e n fe a tur e, o ve r-a p p lic a tio n
a nd r uine d g a r me nts a r e thing s
o f the p a st. An o ve r-the-c e nte r
p r e ssur e a d justme nt a llo ws fo r
e ve n, e d g e-to-e d g e he a t a nd
p r e ssur e, a d ig ita l d isp la y ta ke s
the g ue sswo r k o ut o f p r e ssur e
se tting s, a nd the T win T ime r™ is
g r e a t fo r p r e-he a ting o r
two-ste p a p p lic a tio ns.
I n a d d itio n to e nd ing o ve r-
a p p lic a tio n, the Ho tr o nix®
Auto O p e n C la m fe a tur e s a
c o mp a c t c la mshe ll
d
e sig n,
ma king it the p e r fe c t p r e ss fo r a
c r o w
d
e d wo r ksp a c e. Re q uir ing
o nly a sma ll fo o tp r int, the wid e
o p e ning still a llo ws fo r e a sy
p o sitio ning o f g a r me nts a nd
d e sig n la yo ut.
www.a id e x.c RO L A ND SR M-20 MIL L ING T he SRM-20 is Ro g e ne r a tio n d e machine for the office, studio a nd e d uc a tio Sinc e p io ne e r ing in 1986, Ro la nd to p e r fe c t a c c efficiency in a compact format. T he SRM-20 inc inno va tive fe a a ne w sp ind le b o a r d s a nd c o T he r e sult is a le milling p r e c isio e a se o f use.
T he SRM-20 c a o f no n-p r o p r ie typ ic a lly use d fo inc lud ing c he mic a c r ylic a nd mo O p tio na l c o lle a va ila b le to e c a p a b ility with a e nd mill sha p e for creating beautiful finishes a nd intr ic a te d RO L A ND
MDX-540/540A SYST E M
Pro vid ing Ed uc a tio na l T e c hno lo g ie s fo r T o m o rro w’s Wo rkfo rc e www.a id e x.c o m
8
C N C M a c h i n e s
FA NUC
L E VIL C E R T IF IC AT IO N MIL L & L AT HE
The Levil CNC certification turning cart and Levil CNC certification milling cart enables students to g a in e xp o sur e to tur ning p r a c tic e s, inc lud ing o n-ma c hine p r o g r a mming , se t up a nd o p e r a tio n. T he sma ll fo o tp r int with e a sy a c c e ss a llo ws p o r ta b ility, e limina ting intimid a tio n tha t muc h
larger machines can impose on students when first e nte r ing C NC p r o g r a ms. T he p o r ta b le ma c hine r uns o n a sta nd a r d sing le p ha se 110VAC o utle t a nd is c a p a b le o f b e ing mo ve d fr o m c la ssr o o m to c la ssr o o m thr o ug h a sta nd a r d d o o r wa y.
L e vil C e r tific a tio n L a the F e a tur e s:
• 0iT -D Ma te c o ntr o l • 8.4” L C D • 512 K
• (G 54-G 59)• 8 Sta tio n T ur r e t • O D T o o l sha nk Size ½” (12.7mm)• I D T o o l Sha nk Size ¾” (19.05mm)• 7” (177mm) X axis Travel • 6.3” (160mm) Z a xis T r a ve l
• Re so lutio n 0.00004” (0.001mm)• Re p e a ta b ility 0.0002” (0.005mm)• Ac c ur a c y 0.0004” (0.01mm)
• Rapid Feed (X & Z) 190 ipm (5000mm/min)• Cutting Feed (X & Z) 118 ipm (3000 mm/min • Sp ind le Sp e e d 3000 r p m • Sp ind le Mo to r Po we r 2HP • C huc k size 4” (101.6mm)
• 475lb s a p p r o xima te we ig ht witho ut b a se • Ba se we ig ht a p p r o xima te ly 100lb • Air c o nsump tio n 3C F M (87L /Min)• Air Pr e ssur e r e q uir e me nt 90p si • Po we r 110 VAC , 20A
• Dime nsio ns H66.5” x W33” x D30” (1689 x 838 x 762mm)
L e vil C e r tific a tio n Mill F e a tur e s:
• 0iM-D Ma te c o ntr o l • 8.4” L C D • 512 K
• (G 54-G 59) + 48 a d d itio na l wo r k o ffse ts
• 427 x 250mm (16.8” x 9.8”) Wo r king ta b le a r e a • 11 station, fixed pot tool changer
• Auto ma tic to o l le ng th se nsing (O p tio na l)• 3” Vic e
• 16.5” (421mm) X axis Travel • 8.5” (217mm) Y a xis T r a ve l • 7.5” (190mm) Z a xis T r a ve l
• 0.001 - 360° 4th Axis (O p tio na l)
• Dista nc e fr o m ta b le sur fa c e to sp ind le no se 2.75” - 10.2” (70mm -260mm)
• Re so lutio n 0.00004” (0.001mm)• Re p e a ta b ility 0.0002” (0.005mm)• Ac c ur a c y 0.0004” (0.01mm)
• Rapid Feed (X, Y & Z) 400 ipm (10,200 mm/min)• Cutting Feed (X, Y & Z) 240 ipm (6,120 mm/min)• Ra p id F e e d (4th Axis) 19 r p m (7,000 d e g /min)• T o o l Ho ld e r S20T
• Sp ind le Sp e e d 100 - 17,000 r p m • Sp ind le Mo to r Po we r 2HP • E R-16 C o lle t size
• 450lb s a p p r o xima te we ig ht witho ut b a se • Ba se we ig ht a p p r o xima te ly 100lb • Air c o nsump tio n 3 C F M (87L /Min)• Air Pr e ssur e r e q uir e me nt 90p si • Po we r 110 VAC , 15A
• Dime nsio ns H68” x W33” x D37” (1727 x 838 x 939mm)
Mill
L a the
Mic r o tur n C NC L the F e a tur e s:
Mic r o m ill C NC • VR C NC Milling • Ma inte na nc • C la mp ing K • 1/4” Dia Milling • 5/16” Dia Dr • 3/16” Slo t Dr • I nsta lla tio n a • Se t o f Me tr ic L a the
Mill DENFO RD
MIC R O MIL MIC R O T UR HE
A c o mp a c t 3 a xis C ma c hine a nd 2 a b o th with to ta lly e g ua r d s - the id sma ll p a r t C NC Va r ia b le sp ind fe e d r a te s ma ke Mic r o tur n id e a ma te r ia ls suc h a a luminum a nd
R o u t e r s
NEX T WA VE A UT O MA T IO N C NC PIR ANHA WIT H R O UT E R
Al tho ug h fe a tur i ng a n e ntr y l e ve l pr i c e , the CNC Pi r a nha ® i s e ve r y b i t a s c a pa b l e a s i ts c o usi ns the CNC S ha r k ® a nd i t a l so i nc l ude s a c o nve ni e nt to uc h-sc r e e n i nte r fa c e ! I ts c o mpa c t 12’’ x 18’’ ta b l e ma ke s i t pe r fe c t fo r sma l l e r -sc a l e pr o je c ts l i ke c a r vi ng s, pl a q ue s, o r na me nta l b o xe s a nd pr e c i si o n pa r ts ma c hi ne d fr o m wo o d, so ft me ta l s, o r pl a sti c s, a l l a t a fr a c ti o n o f the pr i c e o f a ful l -si ze d CNC. Wi th i ts 3D c a r vi ng c a pa b i l i ty, i nc l udi ng a 3D mo de l s l i b r a r y, yo u c a n c a r ve e xpe nsi ve c o r b e l s, c ut i ntr i c a te i nl a ys a nd e ng r a vi ng s.
F e a tur e s:
• T a b le d ime nsio ns: 12’’ x 18’ • XYZ travel: 12’’ x 13’’ x 3’’
• O ve r a ll d ime nsio ns: 19-1/2’’W x 20-1/2’’L x 18’’H • Aluminum inte r lo c king slo tte d ta b le tr a c k fo r hig hly c usto miza b le c la mp ing
• I nc lud e s VC a r ve De skto p V8 De sig n so ftwa r e • Ve c to r Ar t 3D Sa mp le r Pa c k • C o lo r T o uc h Sc r e e n p e nd a nt c o ntr o lle r syste m • Re q uir e s a PC c o mp ute r with U SB 2.0 p o r t (no t inc lud e d )
• Re q uir e s a Bo sc h, De wa lt, Po r te r C a b le , o r simila r style p a lm r o ute r .
• C ur r e ntly no t c o mp a tib le with the T o uc h Pr o b e (up g r a d
e c o ming so o n)
• I nc lud e s 2 Ho ld Do wn c la mp s • Ship s fully a sse mb le d. • Ma d e in U SA
NEX T WA VE A UT O MA T IO N
C NC SHAR K
Wi th a ta b l e me a sur i ng 15-3/4” x 31-1/2”, the CNC S ha r k ® i s i d e a l l y sui te d fo r ma c hi ni ng o r c a r vi ng o n a l a r g e va r i e ty o f me d i ums, suc h a s si g ns, d o o r s a nd o the r sma l l p r o je c ts. I ts e a se o f use a nd i mp r e ssi ve p o we r , sp e e d , a nd a c c ur a c y, se ts i t a p a r t fr o m o the r c o mp e ti to r s i n the ma r ke tp l a c e. F e a tur i ng ste e l , a l umi num a nd hi g h-d e nsi ty p o l y-e thyl e ne
construction it is designed to perform flawlessly for ma ny ye a r s to c o me. T he i nc l ud e d c l a mp i ng ta b l e fe a tur e s two ho l d -d o wn sl o ts fo r se c ur i ng wo r k
a nywhe r e a l o ng the l e ng th o f the ta
b l e. Yo u sup p l y a PC
c o mp ute r wi th U S B 2.0 p o r t a n
d a B o sc h Co l t r o ut
e r (so l d se p a r a te l y). S i mp l y c o nne c t the U S B
c a b l e to the c o ntr o l l e r b o x a n
d th
e o the r e nd to yo ur c o mp ute r (no t c o mp a ti b l e wi th Ma c c o mp ute r s).
F e a tur e s:
• I nc lud e s VC a r ve De skto p V8 De sig n so ftwa r e • I nc lud e s e xc lusive C NC Sha r k C o ntr o l Pa ne l o p e r a ting so ftwa r e with Vir tua l Ze r o te c hno lo g y • I nc lud e s 3/8” Dia me te r V-G r o o ve Ro ute r Bit • I nc lud e s two Ho ld -d o wn C la mp s • I nc lud e s mo unts fo r a Bo sc h Ro ute r
(Ro ute r Mo to r is no t inc lud e d , so ld se p a r a te ly)• Ro ute r p o we r o n/o ff c o ntr o l syste m inc lud e d
• F ully c o mp a tib le with the Bo sc h C o lt Pa lm Ro ute r • Do wnlo a d fr e e p r o je c t p la ns fr o m Ve c tr ic • Hig h Sp e e d tr a ve r se r a te : 200 ip m • MDF ta b le sur fa c e.
• U SB inte r fa c e with o n c o ntr o lle r me mo r y sto r a g e.• E me r g e nc y p o we r shut o ff o n C o ntr o lle r .
• O ne ye a r wa r r a
nty o
n p a r ts a nd la b o r , sp e c ia l ship p ing c ha r g e s a p p ly • Ma d e in U SA
A IRWO L F 3D
AXIO M DUAL
F e a tur e s:
•I nd e p e nd e ntly C
Ho te nd s
• C r e a te So lub
Str uc tur e s to
Pr o c e ssing
• Po we r ful Q ua
C o o ling Syste
• I nte r c ha ng e
• C o mb ine 2 Ma
2 C o lo r s in O
• F e a tur e L a r g
Build Vo lume
• Pr o vid e d Pr int Se
fo r E a sy Dua
Ma te r ia l Se tup
• Pr int in O ve r
fr o m T PU to Po
• Wi-F i, E the r ne
Mic r o SD
• Hig h T e mp e
Pr inthe a d s 315 °C
• Core XV Motion System • E nc lo se d C ha
• Auto-L e ve ling •Minimum L a
40 Mic r o ns A IRWO L F 3D
AXIO M
A IRWO L F 3D
3D P r i n t e r s
NEX T WA VE A UT O MA T IO N C NC PIR ANHA WIT H 3D PR INT E R HE AD
Altho ug h fe a tur ing a n e ntr y le ve l p r ic e , the C NC Pir a nha ® is e ve r y b it a s c a p a b le a s its c o usins the C NC Sha r k ® a nd it a lso inc lud e s a c o nve nie nt to uc h-sc r e e n inte r fa c e ! I ts c o mp a c t 12’’ x 18’’
ta b le ma ke s it p e r fe c t fo r sma lle r -sc a le p r o je c ts like c a r ving s, p la q ue s, o r na me nta l b o xe s a nd p r e c isio n p a r ts ma c hine d fr o m wo o d , so ft me ta ls, o r p la stic s, a ll a t a fr a c tio n o f the p r ic e o f a full-size d C NC. With its 3D c a r ving c a p a b ility, inc lud ing a 3D
mo d e ls lib r a r y, yo u c a n c a r ve e xp e nsive c o r b e ls, c ut intr ic a te inla ys a nd e ng r a ving s.
T he C NC Pir a nha ®
ha s suc h inc r e d ib le a c c ur a c y tha t yo u c a n e ve n e ng r a ve c usto m c ir c uit b o a r d s with it. T he c r e a tive p o te ntia l is unlimite d a nd the
entire machine can easily fit on one end of your b e nc h. Just d e sig n yo ur wo r k with the inc lud e d VC a r ve De skto p V8 De sig n so ftwa r e o n a PC c o mp ute r with U SB 2.0 p o r t (no t i nc l ude d). T he n simply save the program directly to a USB flash drive, plug it into the Pendant, select your file, a nd hit the r
un b
utto n. No ne e d to ha ve yo ur
c o mp ute r sub je c te
d to a d usty sho p
e nvir o nme nt.
PRINT SPA C E
AL T AIR
Al ta i r wa s d e si g ne d wi th p r o fe ssi o na l s i n mi nd , g i vi ng
yo u the a b i l i ty to te st i d e a s, c r e a te p r o to typ e s, a nd ho l d a 3D mo d e l i n yo ur ha nd a s q ui c kl y a s p o ssi b l e. S o l i d c r a ftsma nshi p a nd p r e c i si o n ma c hi ne d p a r ts ma ke Al ta i r sup e r i o r i n q ua l i ty. G e t p r i nti ng q ui c kl y wi th sta te -o f-the -a r t fe a tur e s:
L a b-F r ie ndly - Alta ir is a q uie t p r inte r a nd wo n’t b e
a d istr a c tio n - whe n r unning. With a sma ll fo o tp r int
b ut la r g e b uild a r e a , a use r
c a n p r int p a r ts o ve r 8 inc he s in
d ia m
e te r a nd 10 inc he s hig h.
Ac c ur a te - With a c lic k o f a b utto n Alta ir c a n
c a lib r a te the p r int b e
d in l
e ss tha n thr e e minute s so it is e a sy to g e t a c c ur a te p r ints a nd o p tima l fir st la ye r a d he sio n.
Ve r sa tile - O ur NO VA a ll-me ta l ho t e nd c a n p r int a t
hig h sp e e d s witho ut ja mming. Hig h te mp p r inting me a ns Alta ir c a n p r int in o ve r 25 d iffe r e nt ma te r ia ls.
E ffic ie nt - G e t p r inting fa ste r . O ur I nsta nt-O n p r int
b e d he a ts up in le ss tha n o ne minute a nd o ur q ui
c k r e le a se ho t e n
d a nd h
e a te d b e d ma ke c le a n-up e ffic ie nt.
R e lia ble - C o nstr uc te d o f stur d y a luminum
a nd c a r
b o n fib e
r
, the Alta ir is b uild to la st. O nly p r e c isio n ma c hine d a nd hig h q ua lity p a r ts use d in the b uild.
RO L A ND
RO L A ND C AMM-1 G S-24 DE SKT O P
VINYL C
T he Ro la nd C AMM-1 G
precision and efficiency - to the max. Equipped
with a c o mp le
ho ld e r, the G S-24 o
p e r c e nt inc r e a
T r a nsla tio n: yo
think, d e nse sub
d e c a ls, d e c o r
mo r e. B a c ke d
Ro la nd’s b e st d
F e a tur e s:
• I nno va tive, d
p r e c isio n
• U nr iva le d c o
fr o m 2” to 27.5” (50 to
• Ma ximum c
• F le xe s its musc
• De live r s a ma
p e r se c o nd
• O ve r la p C utting
we e d ing e a
•C ut thr o ug h e
ma te r ia ls—with inc
• U nr iva le d c o
fr o m 2” to 27.5” (50 to
• Ma ximum c
•F le xe s its musc
• De live r s a ma
p e r se c o nd
• O ve r la p C utting
we e d ing e a
• C ut thr o ug h e
ma te r ia ls—with inc
L
a s e r E n g r a v e r s /P r i n t e r s /C u t t e r s
RO L A ND
T r ue VIS SG SE R IE S PR INT E R /C UT T E R S
Whe the r yo u’r e just sta r ting o ut o r wa nting to e xp a nd p r o d uc tio n, ne w T r ue VI S SG se r ie s p r inte r /c utte r s o ffe r a ll the q ua lity a nd ve r sa tility o f a Ro la nd , a t a n unb e a ta b le p r ic e. T r ue VI S ushe r s in a ne w e r a o f inte g r a te d p r inting a nd c o nto ur c utting , a nd the SG d e live r s the va lue yo u ne e d to q uic kly a nd e a sily b uild yo ur ind ustr y.
F e a tur e s:
• Pr inte r p lus inte g r a te d c o nto ur c utte r a va ila b le in two mo d e l size s:> 54-inc h (105.7(W) x 29.3(D) x 51.6(H))> 30-inc h (81.5(W) x 29.3(D) x 51.6(H))
• Ro la nd Ve r sa Wo r ks Dua l RI P So ftwa r e inc lud e d – utilize s b o th PDF a nd Po stSc r ip t e ng ine s fo r sup e r -
fast preview times and improved handling of files
with tr a nsp a r e nc ie s
• Ro la nd DG Mo b ile Pa ne l – ma na g e the func tio ns o f the SG p r inte r /c utte r r e mo te ly using a sma r tp ho ne o r ta b le t with a Blue to o th c o nne c tio n
• Ne w ink syste m o ffe r s lo w-c o nsump tio n, lo w-c o st p r o d uc tio n with r e mo va b le 500ml p o uc he s • T r ue VI S I NK a va ila b le in C MYK
• Two new FlexFireTM printheads fire dot patterns more efficiency in 3 sizes, for high quality images a nd c o lo r witho ut hig h ink use • T r ue VI S C o lo r a c hie ve d with ne w F le xF ir e p r inthe a d s a nd T r ue VI S I NK d e live r s a wid e g a mut o f stunning , e ye -p o p p ing c o lo r • Ne w c utting c a r r ia g e , b la d e ho ld e r , a
nd b la d e fo r inc r e a se d d o wn fo r c e a nd me d ia c o mp a tib ility
RO L A ND Ve r sa C AMM VSi PR INT E R S/C UT T E R S
T he VSi Se r ie s o ffe r s e ve r ything use r s a lr e a d y e njo y a b o ut the Ve r sa C AMM inkje c ts...a nd mo r e. We sta r te d o ff with a ll the p o p ula r fe a tur e s tha t ha ve ma d e Ve r sa C AMM the wo r ld ’s b e st-se lling wid e -fo r ma t p r inte r . T he n we e xp a nd e d the func tio na lity a nd c a p a b ilitie s e ve n fur the r , inc o r p o r a ting the la te st p r int he a d te c hno lo g y, fa ste r d r ying GREENGUARD Gold certified eco-Sol MAX ® 2 inks in C MYK c L m, White , Me ta llic a nd ne w L ig ht Bla c k, a nd PANT O NE ® c o lo r ma tc hing. We e ve n a d d e d fr o nt-lo a d ing c a r tr id g e s a nd o the r use r -fr ie nd ly
d e sig n fr e a tur e s fo r unsur p a sse d c o nve nie nc e a nd
efficiency.
Ava ila b le in 30, 54 o r 64-inc h mo d e ls, the
Ve r sa C AMM VSi se r ie s o f wid e fo r ma t inkje t p r inte r s a c hie ve stunning r e sults a c r o ss a wid e a r r a y o f a p p lic a tio ns, inc lud ing la b e ls a nd d e c a ls, sig ns,
banners, vehicle graphics and wraps, fine art p o ste r s, p a c ka g ing p r o to typ e s, PO P d isp la ys a nd he a t tr a nsfe r s fo r a p p a r e l d e c o r a tio n.• Offered in Five Ink Configurations: - C MYK K
YMC - C MYK L c L mL k - C MYK L c L mL k+WH - C MYK L c L mL k+MT - C MYK L c L m+WH+MT。