GPL61AV10_spec
ICOP Technology VDX2-6524 产品说明书
VDX2-6524DM&P Vortex86DX2 800MHzHalf-Size CPU Modulewith 4S/4USB/VGA/LCD/LVDS/AUDIO/2LAN/GPIO 512MB/1GB DDR2 OnboardUser’s Manual(Revision 1.3A)CopyrightThe information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this document and makes no commitment to update or to keep current the information contained in this manual.No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part, in any form or by any means without the prior written permission of the ICOP Technology Inc.©Copyright 2014 ICOP Technology Inc.Manual No. IUM6524000-01 Ver.1.0A March, 2014Manual No. IUM6524000-01 Ver.1.1A July, 2014Manual No. IUM6524000-01 Ver.1.2A September, 2014Manual No. IUM6524000-01 Ver.1.3A April, 2015Trademarks AcknowledgmentVortex86DX2™ is the registered trademark of DM&P Electronics Inc.Other brand names and product names that appear in this document are the properties and registered trademarks of their respective owners. All names mentioned herewith are served for identification purpose only.T a b l e o f C o n t e n t sT a b l e o f C o n t e n t s ............................................................. i iiC h a p t e r 1 Introduction (1)1.1 Packing List (1)1.2 Ordering Information (1)1.3 Product Description (2)1.4 Specifications (3)1.5 Board Dimension (5)C h a p t e r 2 Installation (6)2.1 Board Outline (6)2.2 Connectors Location ...................................... .. (8)2.3 Connectors & Jumpers Summary (9)2.4 Pin Assignments & Jumper Settings (10)2.5 System Mapping (18)2.6 Watchdog Timer (22)2.7 GPIO (22)2.8 SPI Flash (23)2.9 PWM (23)C h a p t e r 3 Driver Installation (24)Appendix (25)A. TFT Flat Panel Data Output (25)B. TFT Flat Panel Support List (26)C. LVDS Flat Panel Support List (27)D. Flat Panel Wiring and Lighting (28)E. TCP/IP Library for DOS Real Mode (29)F. BIOS Default Setting (30)Warranty (31)This page is blankC h a p t e r 1Introduction1.1 Packing ListVortex86DX2 base BoardRS232 cable x 3PRINTER cable x1USB cable x 2LAN cable x 1AUDIO Line x2GPIO cable x1Screw Kit x 11.2 Ordering Information●VDX2-6524-512 Vortex86DX2 CPU Module with 512MMB DDR2●VDX2-6524-1G Vortex86DX2 CPU Module with 1GB DDR2●VDX2-6524-CF-512 Vortex86DX2 CPU Module with 512MB DDR2 and CF Card slot ●VDX2-6524-CF-1G Vortex86DX2 CPU Module with 1GB DDR2 and CF Card slot1.3 Product DescriptionThe VDX2-6524 family of low-power x86 embedded controller is designed to meet half-sized specification, and integrated with the following features.⏹800 MHz Vortex86DX2 SoC⏹VGA, TFT/ LVDS LCD support up to1280x1024 resolution⏹512MB/ 1 GB DDR2 system memory ⏹10/100/1000 Mbps Ethernet⏹ 4 USB 2.0 (host)⏹Up to 4 serial ports⏹Parallel port⏹CF Card slot (Optional) ⏹Audio⏹Onboard 4MB SPI Flash⏹Meet PC/104 stacking spec.⏹ 2 watchdog timer⏹PWM 16 channels⏹JTAG interface⏹AMI BIOS⏹Single voltage +5V DC⏹Support operating temperature rangeof -10°C to +60°CThe VDX2-6524 half-size family of embedded controller is designed with backward compatibility in mind, to provide migration path for projects facing end-of-life challenges with their existing x86 based half-size controller. The VDX2-6524 family of controller is designed as a plug in replacement, with backward compatibility to support legacy software to help extend existing product life cycle without heavy re-engineering.VDX2-6524 is suitable for broad range of data-acquisition, industrial automation, process control, automotive controller, AVL, intelligent vehicle management device, medical device, human machine interface, robotics, machinery control and more.SATA 7P Connector x 1RS-232 port x2RS-232/485 port x2Parallel port x1USB port x4 (USB 2.0 version)USB hot SWAP x 1 (Optional)16-bit GPIO port x110/100Mbps Ethernet port x110/100/1000 Mbps Ethernet port x1SATA 7P for SATA x 12.54 mm ∅ 26-pin header for Printer x12.54 mm ∅ 20-pin header for GPIO x1)2.54 mm ∅ 10-pin header for USB x22.54 mm ∅ 10-pin header for RS-232 x32.54 mm ∅ 2-pin header for Reset x12.00 mm ∅ 44-pin box header for LCD x 12.00 mm ∅ 20-pin header for LVDS x 12.00 mm ∅ 8-pin header for Ethernet x 11.25 mm ∅ 4-pin Wafer for Line-out/MIC-in x21.25 mm ∅ 4-pin Wafer for Touch screen x1(Optional) External RJ-45 connector for Ethernet x1External Mini DIN connector for KBD/Mouse x1 External D-Sub 15 pin female connector for VGA x1 External D-Sub 9 pin male connector for RS232 x11.5 Board DimensionC h a p t e r 2 Installation2.1 Board OutlineLVDSSATA DOM Parallel Port LCD ConnectorCOM2 COM5 COM6 USB 3,4COM1 LAN1 VGA PS/2 KBD/MouseT/S Controller (optional)PC/104Power Connector LINE-OUTMIC-IN USB 1,2 LAN2 Reset GPIO SATA DOM powerVDX2-6524-CFNote:1. COM RS232/485 is selected by BIOS setting2. Touchscreen is optional. No onboard SPI ROM and PS/2 mouse functionsif Touchscreen function is selected.3. GPIO will be preoccupied when eMMC is selected on model VDX2-65244. CF Card slot is only available on model of VDX2-6524-CF5. eMMC, LPT and GPIO are not available on model VDX2-6524-CF2.2 Connectors LocationConnectorsJ1 J29 J4 J31J18J20J22J12J11 J17 J3J10 J9 J2 J8 J24 J5J30 J28 J6 J15J132.32.4 Pin Assignments & Jumper Settings J1: LCD (DVO) Connector(Please refer to Appendix A, for TFT Flat Panel Data Output)J2: VGAJ3: LVDS (24-bit support only)J4: SATA DOMJ5: Power Connector (Terminal Block 5.0mm)J6: SATA DOM POWERJ9: LAN1 (RJ45)J10: LAN2J11: USB 0&1J12: USB 2&3*USB3 will be replaced by USB4 when DOS USB hot SWAP function is selected (Optional)J13: GPIO (Port 6/7 / PWMx16)*GPIO will be occupied if onboard eMMC is selected*Not available on model VDX2-6524-CFJ15: RESETJ17: COM1 RS232 / 485 D-SUB 9 pin (Optional: TTL / GPIO-P4)J18: COM2 RS232 / 485 (Optional: TTL / GPIO-P5)J20: COM5 RS232 (Optional: TTL / GPIO-P0)J22: COM6 RS232 (Optional: TTL / GPIO-P1)J28: LINE OUTJ29: MIC-INJ30: Touch Screen (Optional)*No onboard SPI ROM if Touch Screen function is chosen J31: PRINT* Not available on model of VDX2-6524-CF2.5 System Mapping2.6 Watchdog TimerThere are two watchdog timers in Vortex86SX/DX/DX2 CPU. One is compatible with M6117D watchdog timer and the other is new. The M6117D compatible watchdog timer is called WDT0 and new one is called WDT1.We also provide DOS, Linux and WinCE example for your reference. For more technical support, please visit: /tech2.7 GPIO (General Purpose Input / Output)20 GPIO pins (16 channels without ACC and Ground) are provided by the Vortex86DX2 for general usage in the system. All GPIO pins are independent and can be configured as inputs or outputs, with or without pull-up/pull-down resistors.16 channels GPIO of VDX2-6524 are associated with GPIO port 6 and port 7.Here are registers information of GPIO Port 6 / 7 for your reference.Port 6 Port 7Data Register: 101H Data Register: 102HDirection Register: 93H Direction Register: 94HWe also offer DOS, Linux and WinCE example for your reference. For more technical support, please visit: /tech2.8 SPI flash (Serial Peripheral Interface)As SPI Flash (Serial Peripheral Interface) offers many benefits including: reduced controller pin count, smaller and simpler PCBs, reduced switching noise, less power consumption, and lower system costMany of users may consider using a formatted SPI flash to boot for the system or emulate SPI flash as Floppy (A: Driver or B: Driver). Then you must know how to set for this condition in CMOS Setup and boot up under DOS 6.22, X-DOS, DR-DOS and Free DOS.For more technical support, please visit: /tech2.9 PWM (Pulse-width modulation)Pulse-width modulation (PWM) of a signal or power source involves the modulation of its duty cycle, to either convey information over a communications channel or control the amount of power sent to a load.The popular applications of pulse width modulation are in speed control of electric motors, volume control of Class D audio amplifiers or brightness control of light sources and many other power electronics applications.The Vortex86DX2 SoC integrated 16 channels of PWM interface enabling the Automation, robotic industry to a New Age x86 SoC platform and we also offer the sample code of PWM which will guide the engineer to control the PWM functionality smoothly.For more inquire of this sample code that please contact our sales team or mail to:*************.twChapter 3Driver InstallationVGAThe Vortex86DX2 processor integrated a 2D VGA chip within. It is capable in providing VGA display resolution up to 1280x1024 and also supports TFT/ LVDS flat panel resolution up to 1024x768 while share system memory of 16MB/ 32MB.LANThe Vortex86DX2 processor also integrated 10/100Mbps Ethernet controller that supports both 10/100BASE-T and allows direct connection to your 10/100Mbps Ethernet based Local Area Network for full interaction with local servers, wide area networks such as the Internet.The controller supports: Half / Full-Duplex Ethernet function to double channel bandwidth, auto media detection.For using 1000Mbps LAN, please download the corresponding drivers at the following link: Drivers for RTL811 and if you have any question about it, please contact us at *************.tw HD AudioBesides the above mentioned, the Vortex86DX2 processor includes an ALC 262 (HD Audio) in the CPU as well.Operating system supportThe Vortex86DX2-6524 Half-Size CPU board supports embedded software: Free DOS, DOS 6.22, PCDOS 7.1, DR-DOS, x-DOS, OS/2, Windows CE 6.0, Windows XP Professional, and Windows Embedded standard (XPE). Windows 7 is not officially supported but we have drivers for your testing.For drivers, please visit DMP official website: /tech for them and if you cannot locate them, please mail us at *************.twVortex86DX2-6524 also supports most of the popular Linux distributions, for more detail information, please also visit DMP official website: /techAppendixA. TFT Flat Panel Data OutputB. TFT Flat Panel Support ListC. LVDS Flat Panel Support ListOnboard LVDS connector ONLY supports 24-bit LVDS Panel Please use ICOP–0096 to work with 18-bit LVDS PanelICOP–0096: 18-bit TFT to LVDS converter and Cable-LVDS-30D. Flat Panel Wiring and Lighting⏹HardwareBefore you connect TFT LCD Flat Panel with VDX2-6525, please make sure if the input Voltage of LCD is + 3.3V or Not.⏹BIOSPlease contact or e-mail our regional sales to get special BIOS for any TFT LCD Flat Panels.⏹Wiring LCD CablePlease refer to Page 10(J1: LCD connector) and Page 25~27. If you have further questions about LCD lighting and integration service, please contact our regional sales or mail to *************.twE. TCP/IP library for DOS real modeDSock is a TCP/IP library for DOS real mode, which is used by RSIP. It provides simple C functions for programmer to write Internet applications. ICOP also provide Internet examples using DSock: BOOTP/DHCP, FTP server, SMTP client/server, HTTP server, TELNET server, Talk client/server, etc.DSock provides a lot of example source code. Programmer can add Internet functions to their project easily and save development time. With the utility "MakeROM”, programmer also can make a ROM image to fit their application, those examples can be seen in the following Application systems: Mity-Mite Serial Server,Web Camera Tiny Server and RSIP Serial Server. DSock is free for all ICOP products using M6117D/ Vortex86/ Vortex86SX/ Vortex86DX/ Vortex86DX2 CPUs and ICOP also provides the business version of DSock for those customers who are using other x86 CPUs.If you would like to use DSock or business version of DSock, Please mail to *************.tw or contact your regional sales.Please download the trial DSock software and Utilities from our website:/tech/dmp-lib/dsock/F. BIOS Default settingIf the system cannot be booted after BIOS changes are made, Please follow below procedures in order to restore the CMOS as default setting.⏹Press“End” Key, when the power on⏹Press <Del> to enter the AMI BIOS setup⏹Press “F9” to Load Optimized Defaults⏹Press “F10” to Save configuration changes and exit setupWarrantyThis product is warranted to be in a good working condition for a period of one year from the date of purchase. Should this product fail to be in good working condition at any time during this time period, we will, at our option, replace or repair it at no additional charge except as set forth in the following terms. This warranty does not apply to products damaged by misuse, modifications, accident or nature disaster. Vendor assumes no liability for any damages, lost profits, lost savings or any other incidental or consequential damage resulting from the use, misuse of, originality to use this product. Vendor will not be liable for any claim made by any other related party. Return authorization must be obtained from the vendor before returned merchandise will be accepted. Authorization can be obtained by calling or faxing the vendor and requesting a Return Merchandise Authorization (RMA) number. Returned goods should always be accompanied by a clear problem description.。
SN8P2711A_V10_SC
2.1.2 编译选项表(CODE OPTION) .................................................................................................................................. 16
2.1.4 系统寄存器 .................................................................................................................................................................. 17
2.1.1.3 查表.................................................................................................................................................................... 12
目 录................................................................................................................................................................................................ 3
2.1.4.2 系统寄存器说明.................................................................................................................................................. 17
NI 67xx Pinout Labels for the SCB-68说明书
NOTE TO USERSNI 67xx Pinout Labels for the SCB-68Analog Output Modules/Devices Using the 68-Pin Shielded Connector BlockIf you are using an NI 67xx (formerly referred to as AO Series) analog output device or module with the SCB-68, you can print and attach a connector-specific pinout label to the cover of the connector block for easy connection reference. This document provides labels for the following models:•NI 6703•NI 6704•NI 6711•NI 6713•NI 6715•NI 6722•NI 6723•NI 6731•NI 6733•NI 6738•NI 6739Use the following label if you are connecting the SCB-68SCB-68 to the NI6703 model.Figure 1. NI 67032||NI 67xx Pinout Labels for the SCB-68 Note To UsersUse the following label if you are connecting the SCB-68 to the NI6704 model.Figure 2. NI 6704NI 67xx Pinout Labels for the SCB-68 Note To Users|© National Instruments|3Use the following label if you are connecting the SCB-68 to the NI6711/6731 models.Figure 3. NI 6711/67314||NI 67xx Pinout Labels for the SCB-68 Note To UsersUse the following label if you are connecting the SCB-68 to Connector0 of theNI6713/6722/6723/6733 models.Figure 4. NI 6713/6722/6723/6733 Connector 0NI 67xx Pinout Labels for the SCB-68 Note To Users|© National Instruments|5Figure 5. NI 6723 Connector 16||NI 67xx Pinout Labels for the SCB-68 Note To Usersmodels with the SHC68-68-A2 cable.1Figure 6. NI 6738/6739 Connector 0 with SHC68-68-A2 Cable1 Refer to Figure8 if you are using the NI 6738/6739 with the SH68-C68-S cable and NI PXIe-6738 Adapter or NI PXIe-6739 Adapter.NI 67xx Pinout Labels for the SCB-68 Note To Users|© National Instruments|7with the SHC68-68-A2 cable.1Figure 7. NI 6739 Connector 1 with SHC68-68-A2 Cable1 Refer to Figure9 if you are using the NI 6739 with the SH68-C68-S cable and NI PXIe-6739 Adapter. 8||NI 67xx Pinout Labels for the SCB-68 Note To Usersmodels with the SH68-C68-S cable and NI PXIe-6738 Adapter or NI PXIe-6739 Adapter. Figure 8. NI 6738/6739 Connector 0 with SH68-C68-S Cable and NI PXIe-6738/6739AdapterNI 67xx Pinout Labels for the SCB-68 Note To Users|© National Instruments|9with the SH68-C68-S cable and NI PXIe-6739 Adapter.Figure 9. NI 6739 Connector 1 with SH68-C68-S Cable and NI PXIe-6739 AdapterRefer to the NI Trademarks and Logo Guidelines at /trademarks for more information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patents Notice at/patents. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer to the Export Compliance Information at /legal/export-compliance for the NI global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.© 2018 National Instruments. All rights reserved.377334A-01Apr6。
威林视讯科技有限公司产品手册说明书
服务热线:400-150-1816电话*************传真*************地址:北京市昌平区创新路27号昌平科技园区3号5层网址:北京威林视讯科技有限公司VLINC专业视听显控产品手册专业音视频产品与解决方案提供商2022北京威林视讯科技有限公司COMPANY PROFILE公司简介威林的愿景威林的使命威林的核心价值观威林视讯是专注于显示控制一体化解决方案的科技企业,经过多年发展,已经成长为国内显控领域的知名品牌,拥有多项独立自主的知识产权。
自成立以来,威林视讯连续推出多个创新产品,包括纯硬件图像处理器,到图像综合管理平台,从分布式处理器到可视化分布式系统,从46寸液晶拼墙到70寸液晶拼墙,从高清到8K 系统整体解决方案,威林视讯的每一次创新都引导着行业的发展和进步,威林视讯提出的所见即所得,所得即可操作的理念,已经成为显控系统的行业标准。
威林视讯有拥有强大的研发实力和方案设计服务能力,核心团队均具备10年以上的行业经验,与北京大学,北京交通大学等多所高校建立产学研合作关系,在掌握图像算法,具备产品设计能力的基础上,对于客户的订制化需求能够快速响应,从研发到制造,从设计到施工,建立了一整套的客户服务体系。
威林视讯在北京,上海,深圳,广州,南京,成都,南昌,乌鲁木齐等国内主要城市均设有分支机构,具备国内省会级城市的快速响应能力。
威林视讯的团队成功完成多个典型案例,包括北京新机场,北京公安局合成作战指挥中心,天津市委宣传部,国家气象局,火箭军某基地,上海联通,广州移动,酒泉卫星发射基地,滴滴出行等标志性项目,均为所在领域的标杆项目。
共同成长作为一个发展中的公司,威林愿意帮助客户成长,努力给客户提供技术培训,商务支持等各种支持,希望客户在竞争中取胜,威林的体系对客户保持开放,愿意帮助客户建立认证体系和获得各种知识产权。
同样,威林也希望能够跟员工一起成长,公司鼓励员工参加各种学历或者非学历教育并承担部分学费,公司内部也会不断建设良好的分享,培训和晋升的体系,希望能够鼓励每一位员工都能发挥自己最大的价值。
AV7K300 开发板用户手册说明书
XILINX FPGA开发平台用户手册AV7K300开发板AV7K300开发板用户手册2/39芯驿电子科技(上海)有限公司文档版本控制文档版本修改内容记录REV1.0创建文档AV7K300开发板用户手册目录文档版本控制 (2)一、开发板简介 (5)二、AC7K325B核心板 (7)(一)简介 (7)(二)FPGA芯片 (8)(三)DDR3DRAM (9)(四)QSPI Flash (13)(五)时钟配置 (15)(六)LED灯 (16)(七)电源 (17)(八)结构图 (19)(九)连接器管脚定义 (19)三、扩展板 (28)(一)简介 (28)(一)光纤接口 (29)(二)PCIe插槽 (30)(三)SDI输出接口 (32)(四)SDI输入接口 (33)(五)USB转串口 (34)(六)SD卡槽 (34)(七)40针扩展口 (35)(八)按键和LED灯 (37)(九)JTAG调试口 (38)(十)电源 (38)(十一)结构尺寸图 (39)3/39AV7K300开发板用户手册4/39芯驿电子科技(上海)有限公司芯驿电子科技(上海)有限公司基于XILINX KINTEX-7开发平台的开发板(型号:AV7K300)2020款正式发布了正式发布了,为了让您对此开发平台可以快速了解,我们编写了此用户手册。
这款KINTEX-7FPGA 开发平台采用核心板加扩展板的模式,方便用户对核心板的二次开发利用。
核心板使用XILINX 的KINTEX-7芯片XC7K325的解决方案,含挂载了4片512MB 的高速DDR3SDRAM 芯片和1片128Mb 的QSPI FLASH 芯片。
在底板设计上我们为用户扩展了丰富的外围接口,比如1个PCIex8接口、4路光纤接口、2路SDI 输出接口、2路SDI 输入接口、1路UART 串口接口、1路SD 卡接口、2个40针扩展接口等等。
满足用户各种高速数据交换,数据存储,视频传输处理以及工业控制的要求,是一款"专业级“的FPGA 开发平台。
NETGEAR 兼容 Powerline 和 HomePlug AV 认证设备安装指南说明书
Installation GuideCompatible Powerline and HomePlug AV certified devices include the NETGEAR XAV101, XAV1004, XAV2001, XAV2501, and XAVN2001. For a complete list of AV certified devices, go to /certified_products.Powerline AV+ 200 Adapter Kit XAVB2501Package ContentsPowerline AV+ 200Ethernet CablesResource CD Your adapters may look like one of these:AdaptersAugust 2010This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive.©2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registeredtrademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names aretrademarks or registered trademarks of their respective holders. Information is subject to change without notice.LED and Button DescriptionsFiltered Security Factory ResetEthernet portAC SocketPowerline LEDEthernet LED Power LED LEDWARNING!! Do not press the Security button on the Powerline adapter until installation is complete and the adapters are communicating with each other (indicated by the blinking Powerline LED). Pressing this button too soon cantemporarily disable Powerline communication. If this should occur, use the Factory Reset button to return the Powerline adapter to its factory default settings. WARNING!! To reduce the torque on the AC outlet caused by the weight of the XAV2501, only a right-angled power cord can be plugged into the filtered AC socket of the XAV2501 GR(German) and FR(French), and the power cord cannot be bent.Troubleshooting TipsFor troubleshooting information, see the XAV2501 User Manual . A link to the User Manual is located on the Resource CD .Technical SupportThank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at /register . Registration is required before you can use the telephone support service. Registration via our website is strongly recommended. Go to for product updates and Web support .LEDFor complete DoC, see the NETGEAR EU Declarations of Conformity website at: /app/answers/detail/a_id/11621/Important Safety Information• AC input:100-125V~, 0.2A (Max; NA) and 200-250V~, 0.2A (Max; others),for product only.• Operating temperature: 0C~40C• The socket-outlet shall be installed near the equipment and be easilyaccessible.• XAV2501 ratings (maximum load): EU: 15A 250V~, UK: 12A 250V~, NA: 14A125V~, AU: 9A 250V~.• Only power cords are allowed to be inserted into the filtered AC outlet; no otherequipment with a direct plug-in is allowed. Power cord needs to be a maximum of 1 m long and a minimum of 0.75 mm square of cross-sectional area.• Do not plug devices into the XAV2501 filtered AC outlet that exceed the productratings.The output voltage of the filtered AC outlet is the same as the power outlet which the XAV2501 is plugged into. To help avoid damaging your system, be sure that the attached devices are electrically rated to operate with the power available in your location.• If the input AC voltage is less than 125Vac, the device plugged into the filteredAC socket of the XAV2501 may not perform as well as expected.• DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC socket or intoan attached powerstrip. The device is not intended to be used with home appliances such as air conditioners, power tools, space heaters, fans, hair dryers, ovens, or refrigerators. • Check the electrical current for anyappliance used with the device, and do not exceed home and product outlet ratings and electrical requirements.。
NuDAQ user's guide
NuDAQ®DAQ-2213/221416-CH,高性能低成本的数据采集卡用户指南©版权2004凌华科技股份有限公司保留所有权利。
修订版指南。
1.00 2004年2月12日配件编号50-11034-100本文档中的信息如有更改恕不另行通知为提高可靠性,设计和功能,并且不代表承诺的一部分,制造商。
无论如何,制造商承担直接的,间接的,特殊的,偶然,或间接损害所产生的使用或不能使用这个产品或文件,即使被告知这种可能性损害赔偿。
本文件包含专有信息的版权保护。
所有的权利保留。
本手册的任何部分可能被复制的任何机械,电子,或其他任何形式未经事先书面允许制造商。
商标NuDAQ®,NuIPC®,ARK的,凌华科技NuPRO®是注册商标。
本文中使用凌华科技有限公司的其他产品名称用于识别目的,也可能是商标和/或注册其各自公司的商标或注册商标。
凌华获取服务(忽略之)目录表................................................. . (III)图................................................. ....................................四如何使用本手册............................................. ............第七第1章介绍............................................... (1)1.1特点................................................ .. (1)1.2应用程序................................................ . (2)1.3规格................................................ .. (2)1.4软件支持............................................... . (9)1.4.1编程库............................................. . (9)1.4.2 D2K-LVIEW:使用LabVIEW®驱动器........................................ .. 91.4.3 D2K-OCX:ActiveX控件......................................... .. (10)第2章安装............................................... (11)2.1包含的内容............................................... (11)2.2开箱................................................ .. (12)2.3 DAQ-2213/2214布局........................................... (12)2.4 PCI配置............................................... (13)第3章信号的连接 (15)3.1连接器引脚分配.............................................. . (15)3.2模拟输入信号的连接............................................. . (21)3.2.1类型的信号源........................................... . (21)3.2.2输入配置............................................. . (22)3.2.2.1单端连接........................................... .. (22)3.2.2.2差分输入模式............................................ .. (24)第4章的工作原理.............................................. 。
Chromeleon色谱工作站操作指南2024版
Chromeleon色谱工作站操作指南2024版在化学分析领域,Chromeleon 色谱工作站是一款功能强大且广泛应用的工具。
它能够帮助我们高效地处理和分析色谱数据,为实验研究和质量控制提供有力支持。
接下来,让我们详细了解一下 Chromeleon色谱工作站 2024 版的操作流程。
一、软件安装与启动首先,确保您已经获得了合法的 Chromeleon 色谱工作站 2024 版安装程序。
插入安装光盘或从官方网站下载安装文件,按照安装向导的提示逐步进行操作。
在安装过程中,您需要选择安装路径、语言等选项。
安装完成后,在桌面上会出现Chromeleon 色谱工作站的快捷方式。
双击该快捷方式,启动软件。
启动后,您会看到软件的主界面,包括菜单栏、工具栏、状态栏等。
二、仪器连接与设置在使用 Chromeleon 色谱工作站之前,需要将色谱仪器与计算机正确连接。
通常,可以通过USB、以太网等接口进行连接。
连接完成后,在软件中进行仪器设置。
点击菜单栏中的“仪器”选项,选择“配置仪器”。
在弹出的对话框中,选择您所使用的色谱仪器型号,并设置相应的通信参数,如端口号、波特率等。
设置完成后,点击“测试连接”按钮,确保软件能够与仪器正常通信。
三、方法创建方法是色谱分析的重要参数,包括色谱柱、流动相、流速、检测波长等。
在 Chromeleon 色谱工作站中,可以方便地创建新的分析方法。
点击菜单栏中的“方法”选项,选择“新建方法”。
在方法编辑界面中,依次设置各个参数。
例如,在“色谱柱”选项中,选择您所使用的色谱柱型号和规格;在“流动相”选项中,设置流动相的组成和比例;在“流速”选项中,输入合适的流速值;在“检测波长”选项中,选择您需要检测的波长。
设置完成后,点击“保存”按钮,将方法保存起来,以便后续使用。
四、样品信息录入在进行色谱分析之前,需要录入样品的相关信息,如样品名称、编号、来源等。
点击菜单栏中的“样品”选项,选择“新建样品”。
滨松X射线数据采集系统使用手册说明书
X射线数据采集系统使用手册V3.0.01编制:日期:审核:日期:批准:日期:声明由于产品的持续开发技术升级等原因,手册内容会有相应的变化,使用之前请与技术人员确认版本。
未经北京滨松技术股份有限公司书面许可,禁止以任何形式复制或出版手册内容。
北京滨松光子技术股份有限公司保留该手册所有权利。
1目录目录 (2)第一章X射线数据采集系统简介 (1)1.1 采集系统概述 (1)1.2 应用领域 (1)1.3 采集系统特点 (1)1.4 采集系统性能参数 (2)1.5 相关产品 (2)1.5.1 硬件 (2)1.5.2 软件 (3)第二章注意事项 (5)2.1 供电 (5)2.2 PD阵列模块的使用 (5)2.3 线缆 (5)2.4 计算机设置 (5)第三章系统详细介绍 (7)3.1 工作原理 (7)3.2 数据采集卡 (9)3.2.1 数据采集卡接口 (9)3.2.2 RS422 (9)3.2.3 Ethernet (10)3.2.4 电源插座 (10)3.3 网络设置 (10)23.4 采集软件介绍 (10)3.4.1 PD Demo软件简介 (10)3.4.2 软件使用流程 (11)3.5 采集系统整体介绍 (12)3.5.1系统的连接 (12)3.6 采集系统性能展示 (12)第四章采集系统使用指南 (15)4.1 系统的安装 (15)4.1.1 安装步骤 (15)4.2 参数设置 (16)4.2.1 系统硬件参数设置 (16)4.2.1.1 参数设置流程 (16)4.2.1.2 参数说明 (17)4.2.2 图像参数设置 (18)4.3 采集图像 (19)4.4 查看系统当前参数 (20)第五章动态链接库的介绍 (21)5.1 概述 (21)5.2 函数列表 (22)5.3 函数解释 (22)5.3.1 int WINAPI daq_connect (22)5.3.2 int WINAPI daq_close (23)5.3.3 int WINAPI daq_acquire (23)5.3.4 int WINAPI daq_setup_hardware (25)35.3.5 int WINAPI daq_ping_check (28)5.3.6 int WINAPI daq_read_parameter (28)5.3.7 int WINAPI daq_chk_constate (29)5.3.8 const char* WINAPI daq_get_version (30)第六章产品尺寸 (31)6.1 CF248-09型PD阵列模块机械尺寸图 (31)6.2 CF248-07型数据采集卡机械尺寸图 (32)4第一章X射线数据采集系统简介1.1 采集系统概述X射线数据采集系统是应用于X射线线性扫描的模块化系统,由一个或多个PD阵列模块和一块数据采集卡组成。
Allwinner Camera模块开发说明文档说明书
第 1 页 共 54 页Biblioteka 文档履历版本号 日期
制/修订人 制/修订记录
V1.0
2013-03-17
曾令莹
建立初始版本
V1.1
2013-04-28
曾令莹
补充 device 调试的说明
曾令莹
补充 sensor 器件驱动的格式说明和编写要求,补充 cam_detect 模块,
n 2.4.2.3. CCI_Client 调试节点使用方法 ...........................................................................16
3. 模块体系结构描述.................................................................................................................... 18 4. 模块开发 demo.......................................................................................................................... 19
l 2.3. 源码结构介绍...................................................................................................................5
2.4. 模块配置介绍................................................................................................................... 7
博林科技D10H Dante AV解码器用户手册说明书
D系列Dante AV解码器使用说明书DANTE AV解码器D10H©Bolin Technology目录操作说明 (2)重要信息 (2)清单 (4)概述 (5)特性 (5)产品示图 (6)解码器安装 (7)DIN导轨安装 (7)壁挂式安装 (10)单机架安装 (11)双机架安装 (11)背挂式安装 (12)系统配置 (16)连接 (16)D ANTE AV系统基本连接 (16)获取视频信号 (17)支持的视频分辨率 (17)通过解码器控制摄像机 (17)通过解码器使用红外遥控器 (17)使用键盘控制器控制解码器 (20)LED指标 (22)绿色LED灯 (22)多色LED灯 (22)接口和连接器 (23)USB接口 (23)红外线接口 (24)尺寸图 (25)操作说明感谢购买我们的产品。
如果有任何问题,请联系授权经销商。
在操作设备之前,请仔细阅读本手册并妥善保管以备将来参考。
版权保凌影像保留所有版权。
不得复制本手册的任何部分,如需发布在任何应用中或通过任何方式修改,必须得到我司事先书面同意。
商标●和其他Bolin的商标和标志都是Bolin Technology的财产。
●Microsoft、Windows、ActiveX和Internet Explorer是Microsoft公司在美国或其他国家注册商标。
●HDMI、HDMI LOGO和高清多媒体接口是HDMI许可证、LLC在美国和其他国家的商标或注册商标。
●该软件可能包含H.264/AVC视频技术,其使用需要来自MPEG-LA,L.C的以下通知。
本软件根据AVC专利组合许可证获得许可,用于消费者的个人和非商业用途:(I)按照AVC标准(“AVC视频”)对视频进行编码,或((II)对从事个人和非商业活动的消费者编码的AVC视频进行解码,或从获得许可的视频提供商处获取的AVC视频进行解码。
提供AVC视频。
未授予或暗示任何其他用途的许可。
更多信息可从MPEG LA,L.L.C.获得。
伊士达高Tg、低CTE、多功能填充环氧树脂和酚醛固化层压板和预浸料IT-180ABS IT-180A
IT-180ABS/IT-180ATCHigh Tg, Low CTE, Multifunctional Filled Epoxy Resin and Phenolic-Cured Laminate & PrepregIT-180A is an advanced high Tg (175℃ by DSC) multifunctional filled epoxy with low CTE, high thermal reliability and CAF resistance. It’s design for high layer PCB and can pass 260℃ Lead free assembly and sequential lamination process.Key Features =============================== Advanced High Tg Resin TechnologyIndustrial standard material with high Tg (175℃ by DSC) multifunctional filled epoxy resin and excellent thermal reliability.Lead-Free Assembly CompatibleRoHS compliant and suitable for high thermal reliability needs, and Lead free assemblies with a maximum reflow temperature of 260℃. Friendly Processing and CAF ResistanceFriendly PCB process like high Tg FR4. Users can short the learning curve when using this material.CAF ResistanceLow thermal expansion coefficient (CTE) helps to excellent thermal reliability and CAF resistance providing long-term reliability for industrial boards and automobile application.Available in Variety of ConstructionsAvailable in a various of constructions, copper weights and glass styles, including standard(HTE), RTF and VLP copper foil. ApplicationsMultilayer and High Layer PCB AutomobileBackplanesServers and Networking TelecommunicationsData StorageHeavy Copper ApplicationIndustrial ApprovalUL 94 V-0IPC-4101C Spec / 99/ 101/ 126 RoHS CompliantGlobal AvailabilityArea Address Contact e-mail TELTaiwan 22,Kung Yen 1st Rd. Ping Chen Industry Zone. Ping Chen,Taoyuan, Taiwan, R.O.C.Sales: *************.twTechnician: *****************.tw886-3-4152345 #3168886-3-4152345 #5300East China Chun Hui Rd., Xishan Economic Development Zone,Wuxi City, Jiangsu Province, ChinaSales : ****************Technician: *********************86-510-8223-5888 #516886-510-8223-5888 #3000South China168, Dongfang Road, Nanfang Industrial Park, BeiceVillage, Humen Town, Dongguan City, Guangdong Province, China Sales: ***********.cnTechnician : ***************.cn86-769-88623268 #32086-769-88623268 #550Japan No.2, Huafang Rd, Yonghe Economic Zone, Economic andTechnological Development Zone, Guangzhou,Guangdong Province, ChinaSales: ****************.cnTechnician : *****************.tw86-20-6286-8088 #8027886-3-4152345 #5388USA Tapco Circuit Supply1225 Greenbriar Drive, Suite AAddison, IL 60101, USASales: *******************************Technician : ********************************1-614-937-52051-310-699-8028Europe ITEQ Europe,Via L. Pergher, 16 38121 Trento, Italy Sales: ********************Technician : *********************39-0461-82052639-0461-820526REV 06-12ITEQ Laminate/ Prepreg : IT-180ATC / IT-180ABS IPC-4101C Spec / 99 / 101 / 126LAMINATE( IT-180ATC)Thickness<0.50 mm[0.0197 in] Thickness≧0.50 mm[0.0197 in] Units T est MethodPropertyTypical Value Spec Typical Value SpecMetric(English)IPC-TM-650(or as noted)Peel Strength, minimumA. Low profile copper foil and very low profile copperfoil - all copper weights > 17µm [0.669 mil]B. Standard profile copper foil1.After Thermal Stress2.At 125°C [257 F]3.After Process Solutions 0.88 (5.0)1.23 (7.0)1.05 (6.0)1.05 (6.0)0.70 (4.00)0.80 (4.57)0.70 (4.00)0.55 (3.14)0.88 (5.0)1.40 (8.0)1.23 (7.0)1.23 (7.0)0.70 (4.00)1.05 (6.00)0.70 (4.00)0.80 (4.57)N/mm(lb/inch)2.4.82.4.8.22.4.8.3Volume Resistivity, minimumA. C-96/35/90B. After moisture resistanceC. At elevated temperature E-24/125 3.0x1010--5.0x1010106--103--3.0x10101.0x1010--104103MΩ-cm 2.5.17.1Surface Resistivity, minimumA. C-96/35/90B. After moisture resistanceC. At elevated temperature E-24/125 3.0x1010--4.0x1010104--103--3.0x10104.0x1010--104103MΩ 2.5.17.1Moisture Absorption, maximum -- -- 0.12 0.8 % 2.6.2.1 Dielectric Breakdown, minimum -- -- 60 40 kV 2.5.6 Permittivity (Dk, 50% resin content)(Laminate & Laminated Prepreg)A. 1MHzB. 1GHzC. 2GHzD. 5GHzE. 10GHz 4.44.44.24.14.05.44.44.44.34.14.15.4 --2.5.5.92.5.5.13Loss Tangent (Df, 50% resin content) (Laminate & Laminated Prepreg)A. 1MHzB. 1GHzC. 2GHzD. 5GHzE. 10GHz 0.0150.0150.0150.0160.0170.0350.0140.0150.0150.0160.0160.035 --2.5.5.92.5.5.13Flexural Strength, minimumA. Length directionB. Cross direction ----------------500-530(72,500-76,850)410-440(59,450-63,800)415(60,190)345(50,140)N/mm2(lb/in2)2.4.4Arc Resistance, minimum 125 60 125 60 s 2.5.1 Thermal Stress 10 s at 288°C [550.4F],minimumA. UnetchedB. Etched PassPassPass VisualPass VisualPassPassPass VisualPass VisualRating 2.4.13.1Electric Strength, minimum(Laminate & Laminated Prepreg)45 30 -- -- kV/mm 2.5.6.2 Flammability,(Laminate & Laminated Prepreg)V-0 V-0 V-0 V-0 Rating UL94 Glass Transition Temperature(DSC) 175 170 minimum 175 170 minimum ˚C 2.4.25Decomposition Temperature-- -- 345 340 minimum ˚C2.4.24.6 (5% wt loss)X/Y Axis CTE (40℃ to 125℃) -- -- 10-13 -- PPM/˚C 2.4.24 Z-Axis CTEA. Alpha 1B. Alpha 2C. 50 to 260 Degrees C ------------452102.760 maximum300 maximum3.0 maximumPPM/˚CPPM/˚C%2.4.24Thermal ResistanceA. T260B. T288 -------->60>3030 minimum15 minimumMinutesMinutes2.4.24.1CAF Resistance -- -- Pass AABUS Pass/Fail 2.6.25The above data and fabrication guide provide designers and PCB shop for their reference. We believe that these information are accurate, however, the data may vary depend on the test methods and specification used. The actual sales of the product should be according to specification in the agreement between ITEQ and its customer. ITEQ reserves the right to revise its data at any time without notice and maintain the best information available to users.REV 06-12。
高通骁龙物联网应用处理器选择指南说明书
87-PN002-1 Rev. C Qualcomm Application Processors are products of Qualcomm T echnologies, Inc. and/or its subsidiaries.Qualcomm Kryo, Qualcomm Hexagon, Qualcomm QCS8250, Qualcomm QRB5165, Qualcomm APQ8053, Qualcomm APQ8009, Qualcomm QCS605, Qualcomm SDA845, Qualcomm SDA660, Qualcomm QCS404, Qualcomm QCS405, Qualcomm QCS610 and Qualcomm QCS410 are products of Qualcomm T echnologies, Inc. and/or its subsidiaries.1P r e m i u m T i e rH i g h T i e rM i d T i e rE n t r y L e v e l2Qualcomm Adreno is a produc of Qualcomm T echnologies, Inc. and/or its subsidiaries.Robotics• In-store service robots to provide directions and product information to customers.• Inventory robots track shelving stock and even grab objects for customers.• Delivery robots bring the store to the customer autonomously.• Companion robots to keep an eye on the kids while playing in the yard and send alerts in case of unusual activities• Household Robots to vacuum, clean and perform other shores around the house • QRB5165• SDA845• QCS605• SDA660• QCS610• APQ8053• QCS410• APQ8009• QCS405•QCS4043Connected Cameras• Intelligent Motion Detection analyzes video in real-time and detects valid motion in a scene. It filters out “noise” such as lighting changes, natural tree movements, water movements, smallanimals, and even small video artifact noise.• Object T racking tracks objects of interest and draw bounding boxes around them.• Camera T amper Detection identifies any event that significantly changes the field of view of the camera.• Face Detection and Recognition detects and recognizes people from an on-device database.• Body Cams, Dash Cams, Sports Cameras, Surveillance• Collaboration systems such conference systems with high quality video/audio and AI• QCS8250• SDA845• QCS605• QCS610• APQ8053• QCS410Smart Assistants• Connected device that responds to voice commands and displays relevant information,including reminders, alerts, to-do lists, stream music and video• Integrated camera for face detection, recognition, gesture commands, while supportingvideo calling• Integrated sensors for temperature and light control as well as other appliances• SDA845• QCS610• QCS410• APQ8053• APQ8009• QCS405• QCS404 Digital Signage/Shelf Labels• More targeted signage with Analytics through Facial Recognition, Edge processing, and AI.• Enhanced interactive and bonding experience by integrating touch, voice, gestures, location and camera.• Display standards-based bi-directional, secure communication, driving display and sensors.• Camera customer engagement / counting via anonymous edge processing.• QCS8250• SDA845• QCS605• SDA660Materials are subject to change without notice.T o learn more visit or 4Retail• Handheld POS, Electronic Cash Registers• Eliminate overstocks and out of stocks• Adjusting prices• Product organization on shelves with Multimedia Video ads • In store assistance - cashier v. customer view• Predict and influence customer behavior• Self service kiosk & Checkout – cashier free stores • QCS8250• SDA660• QCS610• QCS410• APQ8009Kiosks/Vending Machines• Product Locator, Price Checking, Way Finding• Advertising, Ordering and Checkout, Store Pickup• Magic mirror (Augmented Reality)• Vending machines with Camera, Facial Detection and Recognition • QCS605• QCS610• QCS410• APQ8009Smart Appliances• Connected appliance that can be triggered to start, pause and stop remotely• Connected appliance that can be operated with voice commands• Smart fridge with integrated Smart Assistant and internal Cameras to look up recipes, jot down notes and send them to family members' phones (and vice versa), peak at the contents inside the fridge, control other devices and perform general searches or stream music • SDA660• APQ8053• APQ8009Industrial Handheld Scanners• Superior bar code scanning and image capture in low light.• Fast Scanning/returns• Enhanced picture quality with low power usage.• Inventory management which is accurate and real-time.• Staff collaboration • SDA660• APQ8009Control Panels/Industrial Panels• Automation control• Remote operation, set-up and control including ability to see what’s going on at home or place of business• Monitor and Control devices such as safety light, doors and other sensors• Program alerts• Monitor and control power consumption, temperature, access, schedules and collaboration • SDA845• QCS605• SDA660• QCS610• QCS410•APQ8009Materials are subject to change without notice.Qualcomm Spectra, Qualcomm Neural Processing SDK, Qualcomm Secure Processing Unit, Qualcomm AI Engine andQualcomm Aqstic are products of Qualcomm T echnologies, Inc. and/or its subsidiaries.FeaturesOrdering InformationProductPart Number *QCS8250 SoC QCS-8250-0-MPSP1099PowerManagement ICsPM-8150L-1-FOWPSP177 PM-3003A-5-15CWLNSP (2x)PMK-8002-0-16CWLPSP* Part numbers are subject to change. Please check with the distributor for most accurate ordering information.• Connected Cameras • Retail Self Checkout • Video Collaboration • Digital Signage • Fleet Management •HealthcareT arget Applications5QCS8250 Block DiagramQCS8250 SpecificationsMore Info:* Supported with a companion modulez Adreno GPU 650 with improved GFxbenchmark and perf/W Native 8-bit integer support for efficient GPU DNNz Native 8-bit integer support for efficient GPU DNNz Hexagon DSP with Quad Hexagon Vector eXtensions (HVX) V66Q, 1.5 GHz, for machine learning, integrated DNN for advanced VA and Qualcomm® Neural Processing SDK frameworkz Kryo 585 CPU with 4x Kryo Gold (2.85GHz) + 4x Kryo Silver (1.8 GHz) w/ 4MB L3 cachez Camera: Dual 14-bit Qualcomm Spectra™ 480 ISP support 64MP single camera capturez Support for up to 24 cameras, or seven concurrent camerasz Superior image quality in zzHDR, video denoising, mid/low frequency denoising, lens shading correction, video super resolutionz Supports triple 4K displayz Video/display: Concurrent UHD encode/decode, 3X display port, MIPI-DSINPUFor additional information for a chosen product please check directly with the manufacturer.Eragon™ SoM/Development Boardby eInfochipsQualcomm ® HDK865 Dev Kitby Qualcomm T echnologiesInforce 68A1™ SoM and Development Kitby SMART Wireless ComputingThundercomm T urboX™ C865 SoMby Thundercomm T echnologyThundercomm T urboX™ C865Development Kitby Thundercomm TechnologyCOMING SOONCOMING SOONMaterials are subject to change without notice.Qualcomm T rusted Execution Environment and Qualcomm Crypto Engine Core are products of QualcommT echnologies, Inc. and/or its subsidiaries.Ordering Information* Part numbers are subject to change. Please check with the distributor for most accurate ordering information.• Autonomous Delivery Vehicles • Edge AI Box• Commercial & Enterprise Drones •CoBots & Intelligent MachinesT arget Applications7QRB5165 Block DiagramQRB5165 SpecificationsMore Info:Featuresz Qualcomm Spectra 480 Image Signal Processor designed to deliver a premium camera experience that can process 2 Gigapixels per second with high-performance capture of 200 megapixel photos, 8K video recording and 4K HDR video capture.z Adreno 650 Visual Processing Subsystem deliver’s quality graphics for larger-than-life immersive experiences using the Adreno graphics processing unit (GPU) and video processing unit (VPU).z Hexagon 698 DSP with Hexagon Vector eXtensions (HVX), Hexagon T ensorAccelerator and Hexagon Scalar Accelerator to support sophisticated, on-device AI processing, and delivers mobile-optimized computer vision (CV) experiences for wide-array of use cases.z Kryo 585 CPU: Manufactured in 7nm process node, optimized across four high-performance Kryo Gold cores and four low-power Kryo Silver cores.z Qualcomm Secure Processing Unit (SPU) offers vault-like security that is designed to help safeguard your facial data, iris scan and other biometric data. It supports hardware root of trust, Qualcomm® T rusted Execution Environment, Secure boot and camera security.ProductPart Number *QRB5165 SoC QRB-5165-0-MPSP1099PowerManagement ICsPRB-5165-0-FOWPSP161 PM-8150L-1-FOWPSP177 PM-3003A-5-15CWLNSP (2x)PMK-8002-0-16CWLPSP* Supported with a companion moduleThundercomm EB5 AI Boxby Thundercomm T echnologyEragon™ SoM/Development Boardby eInfochipsQualcomm ® Robotics RB5 PlatformDevelopment Kitby Thundercomm T echnologyThundercomm T urboX™C5165 SoMby Thundercomm Technology8For additional information for a chosen product please check directly with the manufacturer.COMING SOONQualcomm Robotics RB5 Platform Development Kit is a product of Qualcomm T echnologies, Inc. and/or its subsidiaries.Materials are subject to change without notice.Qualcomm Universal Bandwidth Compression and Qualcomm aptX are products of Qualcomm T echnologies, Inc. and/or its subsidiaries.Featuresz Customized 64-bit Arm v8-compliant octacore Kryo 385 applications processorz Always-on subsystem with RPMh for hardware-based resource and power managementz Qualcomm® Universal BandwidthCompression (UBWC) 2.0, 2x compression with camera, display, and DSPz Two 4-lane DSI D-PHY 1.2 at 2.5 Gbps per lanez 3840 × 2400 display at 60 fps, 2560 buffer width (10 layers blending), and VESA DSC 1.1z A complete 4K60 entertainment system 4K60 10b encode + 4K60 10b decodez Qualcomm Spectra 280 camera: dual 14-bit image signal processing (ISP) + Lite ISP: 16 + 16 + 2 megapixels (MP) to support 32 MP/30 fpsz Qualcomm AI Engine for on-device intelligenceOrdering InformationProductPart Number *SDA845 SoC SDA-845-A-914BMPSP PowerManagement ICsPM-845-0-287WLPSP PMI-8998-0-182WLNSP PM-8005-0-72WLPSP* Part numbers are subject to change. Please check with the distributor for most accurate ordering information.• Service/Companion Robots • Interactive Whiteboards • Smart Assistants • Connected Cameras • Digital Signage •Industrial PanelsT arget Applications9SDA845 Block DiagramSDA845 SpecificationsMore Info:Thundercomm T urboX™ AI Kitby Thundercomm T echnologyThundercomm T urboX™ D845Development Kitby Thundercomm T echnologyThundercomm T urboX™ D845 SoMby Thundercomm T echnologyQualcomm® Robotics RB3 PlatformDevelopment Kitby Qualcomm T echnologies, IncInforce 6701™ Micro SoM by SMART Wireless ComputingInforce 6701™ Development Kitby SMART Wireless ComputingEragon™ 845 Development Kitby eInfochipsOpen-Q™ 845 Micro SoMDevelopment Kitby LantronixOpen-Q™ 845 Micro SoMby Lantronix10For additional information for a chosen product please check directly with the manufacturer.Qualcomm Robotics RB3 Platform Development Kit is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.Materials are subject to change without notice.Qualcomm PM670, Qualcomm PM670L, Qualcomm WCD9326, Qualcomm WCD9341 and Qualcomm Noise and EchoCancellation are products of Qualcomm T echnologies, Inc. and/or its subsidiaries.Featuresz Dual 14-bit Qualcomm Spectra 270 ISP capable of supporting upto dual 16MP sensorsz Fabricated using the advanced 10nm FinFET process for exceptional thermal and power efficiencyz Adreno 615 GPU with 64-bit addressing @ up to 780MHz with latest API supportz Hexagon 685 DSP with dual hexagon vector extensions for running DNN models and advanced Qualcomm® Neural Processing Engine SDK supportz Up to eight (8) Kryo 300 CPU cores optimized for power and DMIPSz Qualcomm AI Engine designed to support on-device machine learningz Low power sensor core helps support always-on use cases at reduced power levelsz Supports up to 2x2 802.11ac Wi-Fi with MU-MIMO and dual band simultaneous transmission, Bluetooth 5.1Ordering InformationProductPart Number *QCS605 SoC QCS-605-0-771PSP PowerManagement ICsPM-670-0-219WLPSP PM-670L-0-196WLPSP* Part numbers are subject to change. Please check with the distributor for most accurate ordering information.• Household Robots• Action/VR360 Cameras • Enterprise Surveillance • Smart Displays• Dash/Body Cameras •Digital SignageT arget Applications11QCS605 Block DiagramQCS605 SpecificationsMore Info:Open-Q™ 605 SBC Development Kit by LantronixIMX577 Camera Module for S605 SBCby Thundercomm T echnologyThundercomm T urboX S605 SBCby Thundercomm TechnologyQCS605 VR360 Camera SoftwareDevelopment Kitby Altek Corp.SOM605 4058by Insignal Co., Ltd.QCS605 DVKIT-R3 Boardby Insignal Co., Ltd.12For additional information for a chosen product please check directly with the manufacturer.Materials are subject to change without notice.Featuresz Custom built 64-bit octa-core Arm v8-compliant Kryo 260 CPU arranged in two dual-clusters:z Quad high-performance Kryo coresoperating at 2.2 GHz – Gold cluster with 1 MB L2z Quad low-power Kryo cores operating at 1.8 GHz – Silver cluster with 1 MB L2z Hexagon DSP with HVX (dual-HVX512) 787 MHzz Adreno GPU 512 with 64-bit addressing; designed for 650 MHzz Dual-channel non package-on-package (non-PoP) high-speed memory, LPDDR4/4x SDRAM designed for 1866 MHz clockz Display support: up to 2560 × 1600 10-bit at 60 Hz, up to eight hardware layersz Video support: 3840 × 2160 at 30 Hz, HEVC Main 10, VP9, H264, and other popular video formatsz Dual 14-bit image signal processing (ISP): 16 +16 MP, 540 MHz each; 24MP30 ZSL with dual ISP; 16 MP 30 ZSL with a single ISPOrdering InformationProductPart Number *SDA660 SoC SDA-660-0-692NSP PowerManagement ICsPM660-0-219-WLPSP PM-660L-0-196WLPSP* Part numbers are subject to change. Please check with the distributor for most accurate ordering information.• Household Robots • Handheld POS • Smart Displays• Electronic Cash Registers • Smart Appliances •Digital SignageT arget Applications13SDA660 Block DiagramSDA660 SpecificationsMore Info:Thundercomm T urboX™ D660/D660Pro Dev Kitby Thundercomm T echnologyInforce 6502™ Micro SoM by SMART Wireless ComputingInforce 6502™ Development Kitby SMART Wireless ComputingThundercomm T urboX™ D660/D660Pro Dev Kitby Thundercomm TechnologyEragon™ 660 Development Kitby eInfochipsEragon™ 660 SBCby eInfochipsOpen-Q™ 660 µSOMby Lantronix14For additional information for a chosen product please check directly with the manufacturer.Materials are subject to change without notice.Qualcomm Neural Processing SDK, Qualcomm PM6150, Qualcomm PM6150L, Qualcomm WCD9370, Qualcomm WCD9341, Qualcomm WSA8810 and Qualcomm WSA8815 are products of Qualcomm T echnologies, Inc. and/or itssubsidiaries.Featuresz Dual 14-bit Qualcomm Spectra 250L ISP capable of supporting up to dual sensors. 24 MP @ 30 fps with dual ISPs; each ISP capable of 16 MPz Fabricated using the advanced 11nm FinFET process for exceptional thermal and power efficiencyz Adreno 612 GPU with 64-bit addressing @ up to 845MHzz Hexagon DSP with dual Hexagon Vector eXtensions (HVX), 1.1Ghz for running DNN models and advanced Qualcomm® Neural Processing Engine SDK supportz Up to eight Kryo 460 CPU cores optimized for power and DMIPSz Qualcomm AI Engine designed to support on-device machine learningz Low power sensor core helps support always-on use cases at reduced power levelsOrdering Information* Part numbers are subject to change. Please check with the distributor for most accurate ordering information.• Service/Companion Robots • Industrial Panels• Enterprise Surveillance Camera/AI Gateway • Vending Machines/Kiasks • Dash/Body Cameras•Collaboration Devices/Video ConferencingT arget Applications15QCS610/QCS410 Block DiagramQCS610/QCS410 SpecificationsMore Info:ProductPart Number*QCS 610 SoC QCS-610-0-PSP806-MT-01-0-AC QCS 410 SoC QCS-410-0-PSP806-MT-01-0-AC PMICPM-6150-0-WLPSP199PM-6150L-1-FOWPSP177Altek Development Kitby Altek Corp.Eragon™ QCS610/QCS410 SOMby eInfochipsEragon™ QCS610/QCS410Development Kitby eInfochipsFor additional information for a chosen product please check directly with the manufacturer.Open-Q™ 610 µSOMby Lantronix4K PoE AI Dome Development Kitby SercommThundercomm QCS610/QCS410 SoMby Thundercomm TechnologyMaterials are subject to change without notice.Qualcomm AI Platform, Qualcomm PM8953, Qualcomm PMi8952, Qualcomm WCD9326, Qualcomm WCD9335 andQualcomm Quick Charge, are products of Qualcomm T echnologies, Inc. and/or its subsidiaries.Featuresz Dual ISP ideal for supporting intelligent camera features for sports cameras, IP security cameras and VR camerasz Fabricated using the advanced 14 nm FinFET process for low active powerdissipation & fast peak CPU performancez Adreno 506 GPU with 64-bit addressing @ up to 650MHz with latest API supportz Hexagon 546 DSP designed to providebattery-efficient audio, video, and computer vision use casesz Heterogeneous architecture includes 64-bit, octa-core Arm Cortex-A53 CPU @ up to 2.2GHz per corez Qualcomm® AI Platform designed to support on-device machine learningz Low power sensor core helps support always-on use cases at reduced power levelsz Integrated 802.11ac, Bluetooth 4.1 low energy and GPS supportOrdering InformationProductPart Number *APQ8053APQ-8053-A-792NSP PowerManagement ICsPM-8953-0-187FOWNSP PMI-8952-0-144WLNSP* Part numbers are subject to change. Please check with the distributor for most accurate ordering information.• Household Robots • Sports Cameras• Enterprise Surveillance • Smart Displays• Dash/Body Cameras •Smart AppliancesT arget Applications17APQ8053Pro/APQ8053Lite Block DiagramAPQ8053Pro/APQ8053Lite SpecificationsMore Info:Open-Q™ 624A SOMby LantronixOpen-Q™ 626 µSOM Development Kitby LantronixOpen-Q™ 624A Development Kitby LantronixEragon™ 624 Development Kitby eInfochipsEragon™ 624 Micro SoMby eInfochipsOpen-Q™ 626 µSOMby Lantronix18Thundercomm T urboX™ S626 SOMby Thundercomm T echnologyThundercomm T urboX™ S626Development Kitby Thundercomm T echnologyThundercomm T urboX Smart CameraReference Platform - SDA626by Thundercomm T echnologyFor additional information for a chosen product please check directly with the manufacturer.Materials are subject to change without notice.Qualcomm Location Suite, Qualcomm Processor Security and Qualcomm Content Protection are products ofQualcomm T echnologies, Inc. and/or its subsidiaries.Featuresz Adreno 304 GPU 3D graphics accelerator (up to 456 MHz) with latest API supportz Hexagon 536 DSP designed to provide battery-efficient audio/video use casesz Heterogeneous architecture includes 32-bit, ***********************************per corez Fabricated using the advanced 28 nm LP CMOS processz Qualcomm® Location Suite Gen 8C; support for three bands concurrently:- GPS, BeiDou and GLONASS or - GPS, BeiDou and Galileoz Integrated 802.11a/b/g/n, Bluetooth 4.1 low energy and GPS supportz Designed to povide dedicated support forindustry-leading codecs and other multimedia formats to support carrier deployments around the world.z Worldwide ecosystem of QTI vendors,customers, developers and embedded device OEMsOrdering InformationProductPart Number *APQ8009 SoC APQ-8009W-0-575PNSP PowerManagement ICsPM-8916-0-176NSP* Part numbers are subject to change. Please check with the distributor for most accurate ordering information.• Household Robots • Smart Appliances • Smart Assistants • Vending Machines • Handheld POS •Control PanelsTarget ApplicationsAPQ8009 Block DiagramAPQ8009 SpecificationsMore Info:19Open-Q™ 212A SoMby Lantronix Open-Q™ 212A Home HubDevelopment Kitby LantronixThundercomm T urboX™ S212 SoMby Thundercomm T echnologyFor additional information for a chosen product please check directly with the manufacturer.Materials are subject to change without notice.Featuresz Highly-integrated architecture, with up to four cores, Dual-DSP , Wi-Fi, Bluetooth, powerfulaudio features and our AI engine on a single chipz Qualcomm AI Engine supports highly efficient on-device inferences and machine learning-based, embedded automatic speech recognitionz Cutting-edge connectivity with advanced Wi-Fi, Bluetooth and Zigbee coexistence technology and low-latency streaming z Adreno GPU and display (QCS405 only)z Superior audio performance, with support for Dolby Atmos and DTS:X immersive home audioz High performance, low-power keyword detection pre-loaded and running on an integrated DSPz Configurable multi-keyword detection with Local Automatic Speech Recognition for customizable user experiencesz Includes multi-mic beamforming noise suppression with mono, stereo and multi-channel echo cancellationOrdering InformationProductPart Number *QCS405 SoC QCS-405-0-NSP722QCS404 SoC QCS-404-0-NSP722PowerManagement ICsPMS-405-0-116WLNSP* Part numbers are subject to change. Please check with the distributor for most accurate ordering information.• Household Robots• Home Hubs/Security Panels • Smart Assistants • Smart Speakers • Smart Soundbars •AV ReceiversT arget Applications21QCS404/QCS405 Block DiagramQCS404/QCS405 SpecificationsMore Info:Thundercomm T urboX™ C404/405Development Kit by Thundercomm T echnologyQCS405 SoMby LITE-ON T echnologyQCS404 SoMby LITE-ON T echnologyThundercomm T urboX™ C404/405SoMby Thundercomm Technology22For additional information for a chosen product please check directly with the manufacturer.Locate Module VendorsT o learn more visit or©2021 Qualcomm T echnologies, Inc. and/or its affiliated companies. All Rights Reserved. Qualcomm, Adreno, H exagon, Kryo, Qualcomm Spectra, Quick Charge and Qualcomm Aqstic are trademarks or registered trademarks of Qualcomm Incorporated. aptX is a trademark or registered trademark of Qualcomm T echnologies International, Ltd. All Qualcomm Incorporated trademarks are used with permission. Other products and brand names may be trademarks or registered trademarks of their respective owners. 0721AWhether you have a single specialty, or are crossing over to develop in new areas, Qualcomm Developer Network (QDN) is available to support your expanding needs. There are solutions to support Qualcomm T echnologies application processor-based devices from initial concept all the way to commercialization. Our extensive range of software tools helps add advanced multimedia features and unique experiences, such as virtual reality, to embedded devices.It’s easy to navigate QDN and intuitively tap into what you need for development including software development kits, hardware and software support, community projects and forums, as well as othertools for our application processors. QDN features an expansive platform of software and hardware tools to integrate revolutionary technology into your own unique concepts and cutting-edge designs.Whatever you’re building, whether it’s high-performance apps, smart Io T devices, or immersive gaming experiences, QDN is equipping the next generation of mobile pioneers and experiences.Our mission is to empower the visionaries of tomorrow,today.Qualcomm ® Developer NetworkT o learn more visit or 。
安捷伦示波器探头选型指南1
1.5 m
10:1 500 MHz
1 MΩ, 6-15 pF
400 V CAT II
5000 系列 (500 MHz) 6000 (300 MHz-1 GHz)、 7000、5464x、54830 和 8000 系列
1.5 m
10:1 150 MHz
1 MΩ, 9-17 pF
400 V CAT II
单端有源探头特性
型号 N2795A N2796A 1157A 1158A
衰减 10:1 10:1 10:1 10:1
探头带宽 1 GHz 2 GHz 2.5 GHz 4 GHz
输入动态范围 0 至 ±8 V 0 至 ±8 V 0 至 ±2.5 V 0 至 ±2.5 V
应用和使用 对数字系统和模拟系统设计执行通用、高速探测
10076B N2771B
电缆长度 衰减 典型探头带宽 补偿示波器输入 最大输入电压 推荐示波器
1.5 m
1:1 20 MHz
高阻抗
400 V CAT II
1000、3000、2000 X、3000 X、5000、6000、 7000、8000、54600 系列
1.3 m
1:1 35 MHz
1 MΩ
衰减
要根据测试信号的幅度和示波 器 垂 直 灵 敏 度 范 围, 选 择 探 头 的 衰 减比 (1:1、10:1、100:1、1000:1)。
带宽 (BW)
探头的额定带宽应与示波器相 匹 配, 并 保 有 对 测 试 信 号 的 裕 量。 但 在 较 高 频 率 时, 地 线 电 感 和 输 入 电容对系统性能的影响比探头带宽 的影响更大。
最大输入电压 (Vmax)
为了确保用户安全,同时帮助用 户保护示波器输入不会受到破坏性电 压的影响及避免探头损坏,所选探头 的额定电压必须高于被测信号。
天微信电子H.264 HD基线配置器(v2.00.01) 说明书
P R O D U C T P R E V I E WFEATURESDESCRIPTION SPRS527–JANUARY 2009H.264HD Baseline Profile Encoder (v2.00.01)on DM6446supported•eXpressDSP™Digital Media (XDM 1.0•Arbitrary resolutions up to HD resolutions of IVIDENC1)interface compliant 3840x2176including standard image sizes such as PAL D1(720x576),SQCIF,QCIF,CIF,•Validated on the DM6446EVMQVGA,and VGA supported•H.264Baseline Profile upto level 4.1supported •User configurable Group of Pictures (GOP)•Quarter-pel interpolation for motion estimation length supportedsupported•User configurable parameters like •In-loop filtering,which can be switched off for pic_order_cnt_type,whole picture and for slice boundaries log2_max_frame_num_minus4,and supportedchroma_qp_index_offset supported•User controllable multiple slices per picture •YUV422interleaved and YUV420planar color supportedsub-sampling formats supported•Error-robustness features like intra slice •Controls the balance between encoder speed insertion in inter frames,adaptive intra and quality by using the user defined motion refresh,constrained intra prediction,and estimation settings and encoding Preset forcefully encoding of any frame,such as I optionframe supported•Constraint to keep macro block bits within •User controllable quantization parameter 3200bits as per the standard not supportedrange supported•Unrestricted motion vector search,whichallows motion vectors to be outside the frame H.264is the latest video compression standard from boundary supportedthe ITU-T Video Coding Experts Group and the •Image width and height that are non-multiple ISO/IEC Moving Picture Experts Group.This H.264of 16supported (multiples of 4,8supported,Encoder is validated on the DM6446EVM with Code non-multiples of 4not supported)Composer Studio version 3.2.37.12and code •TI proprietary rate control algorithmsgeneration tools version 6.1.2.Please be aware that an important notice concerning availability,standard warranty,and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.eXpressDSP is a trademark of Texas Instruments.All other trademarks are the property of their respective owners.PRODUCT PREVIEW information concerns products in the Copyright ©2009,Texas Instruments Incorporatedformative or design phase of development.Characteristic data and other specifications are design goals.Texas Instruments reserves the right to change or discontinue these products without notice.PRODUCT PREVIEW Performance SummarySPRS527–JANUARY This section describes the performance of the H.264HD Baseline Profile Encoder on DM6446EVM.Table1.Configuration TableCONFIGURATION IDH.264base profile levels up to level4.1H264_ENC_001Table2.Cycles Information-Profiled on DM6446EVM with IMCOP and Code Generation Tools Version6.1.2PERFORMANCE STATISTICS(MEGA CYCLES PER SECOND)(1)CONFIGURATIONPEAK ID TEST DESCRIPTION AVERAGE(2)(3)(4)720p5994_parkrun_ter_1280x720_422i_205fr.yuv,targetFrameRate=13fps,targetBitRate=2Mbps,IntraPeriod=0.5sec,encodingFrameRate=15fps,510537rcAlgo=PLR4_RC,NFAVG=102smaninrest_p1920x1080_30fps_420pl_60fr,targetFrameRate=5fps,targetBitRate=9571622Mbps,IntraPeriod=1sec(encoding Frame rate=5fps),rcAlgo=PLR4_RC,NFAVG=10mobile_p352x288_30fps_420pl_300fr,targetFrameRate=30fps,targetBitRate=0.768Mbps,IntraPeriod=1sec(encoding Frame rate=30fps),rcAlgo=PLR4_RC,139145NFAVG=100sheilds_720x480_422i_252frames.yuv,targetFrameRate=30fps,targetBitRate=1.572Mbps,IntraPeriod=0.5sec(encoding Frame rate=30fps),rcAlgo=PLR4_RC,418448NFAVG=252H264_ENC_001Amazing_caves_1280x720_yuv422i_250frames targetFrameRate=13fps,targetBitRate=3Mbps,IntraPeriod=0.5sec(encoding Frame rate=15fps),557608rcAlgo=PLR4,NFAVG=125720p50_shields_ter_1280x720_422i_300fr.yuv,target frame rate=13fps,targetBitRate=2mbps,rcAlgo=PLR4_RC,NFAVG=150,IntraPeriod=0.5sec(encoding505532Frame rate=15fps)tennis_p704x480_30fps_420pl_150fr,targetFrameRate=30fps,targetBitRate=1.572344(5)380(5)Mbps,IntraPeriod=1sec(encoding Frame rate=30fps)rcAlgo=PLR4_RC,NFAVG=100720p5994_parkrun_ter_1280x720_422i_205fr.yuv,targetFrameRate=13fps,targetBitRate=3Mbps,IntraPeriod=1sec(encoding Frame rate=15fps),442(5)472(5)rcAlgo=PLR4_RC,NFAVG=102(1)Measured with program memory,stack,and I/O buffers in external memory with cache configuration:32K-bytes L1P Program Cache,64K-bytes L1D Data Memory,and16K-bytes L1D Data Cache,64K-bytes L2Cache,32bit DDR@162MHz,CPU@594MHz and only used by encoder.(2)Average MCPS is calculated by multiplying average Mega Cycles Per Frame numbers by target frame rates.Average MCPS iscalculated over NFAVG frames.(3)Peak MCPS is calculated on moving average of4frames over NFAVG frames.(4)For higher bit-rates of encoding,actual cycles performance will be worse than the above mentioned numbers.(5)For these,encodingPreset=High speed,option is used.All other performance numbers use(encodingPreset=User_defined,whichuses High quality option).2Submit Documentation Feedback Copyright©2009,Texas Instruments IncorporatedP R O D U C T P R E V I E W SPRS527–JANUARY 2009Note: Average and peak MCPS measurements can vary by +/-5%.Figure 1.Encoding Time for Individual Frames (720p50_shields_ter_1280x720_422i_300fr.yuv @2Mbps @15fps,with 1MV,QPI,LPF,UMV,Target Frame rate =13fps,rc algo PLR4_RC,NFAVG =150IntraPeriod =0.5sec and User_defined Preset)Table 3.Memory Statistics -Generated with Code Generation Tools Version 6.1.2CONFIGURAT LEVEL ANDMEMORY STATISTICS (1)TOTALION ID RESOLUTIONPROGRAMDATA MEMORYMEMORYINTERNALEXTERNAL STACKPERSISTENTCONSTANTSSCRATCHH264_ENC_00Level 3.0D1162.5363.2515329.346982242.551(720x576)Level 4.0HD162.5363.2532079.396484412.55(1280x720)Level 4.0HD 162.5363.2569499.3208989279.55(1920x1080)Level 4.1HD 162.5363.25265769.38276835093.55(3840x2176)(1)All memory requirements are expressed in kilobytes (1K-byte =1024bytes)and there could be a variation of around 1-2%in numbers.Table 4.Internal Data Memory Split-UpDATA MEMORY -INTERNAL(1)CONFIGURATION IDSHAREDINSTANCE (2)CONSTANTSSCRATCH H264_ENC_001063.25(1)Internal memory refers to L1DRAM.All memory requirements are expressed in kilobytes and there could be a variation of around 1-2%in numbers.(2)I/O buffers not included.Some of the instance memory buffers could be scratch.Table 5.Co-Processor(s)Memory StatisticsSEQ DATA SEQ PROG IMX WORKINGCONFIGURATION ID IMX IMG BUF (1)IMX CMD MEM (1)MEMORY (1)MEMORY (1)MEM (1)H264_ENC_001142794(1)All memory requirements are expressed in kilobytes and all are scratch buffers.Copyright ©2009,Texas Instruments Incorporated Submit Documentation Feedback3PRODUCT PREVIEW SPRS527–JANUARY Table6.PSNR and Bit-Rate DetailsBITRATE/AVERAGE LUMA PSNR(in dB)TEST SEQUENCE15720002000000400000060000008000000(bps)(bps)(bps)(bps)(bps) parkrun_p1280x720_30fps_420pl_302fr,target frame rate=7.5fps,-25.9829.05--rcAlgo=PLR3_RC,NFAVG=63,IntraPeriod=1secshields_p1280x720_30fps_420pl_302fr,target frame rate=7.5fps-35.15-38.96-rcAlgo=PLR3_RC,NFAVG=75IntraPeriod=1secstockholm_p1280x720_30fps_420pl_302fr,target frame rate=7.5fps-34.7036.48--rcAlgo=PLR3_RC,NFAVG=75IntraPeriod=1sectennis_p704x480_30fps_420pl_150fr.yuv,target frame rate=30fps29.98----rcAlgo=DCES_TM5,NFAVG=100IntraPeriod=0.5secstockholm_p1280x720_30fps_420pl_302fr,target frame rate=7.5fps-32.63---rcAlgo=DCES_TM5,NFAVG=150IntraPeriod=0.5secNote:1.Scene change detection is OFF2.Loop Filter enabled4Submit Documentation Feedback Copyright©2009,Texas Instruments IncorporatedP R O D U C T P R E V I E WNotesReferencesGlossaryAcronyms SPRS527– JANUARY 2009•I/O buffers:–Input buffer size =4M-bytes (1080P,one YUV422interleaved frame)–Output buffer size =2025K-bytes (for encoding one 1080P frame)•Memory Configuration–L1P:32K-bytes Program Cache–L1D:64K-bytes Data Memory and 16K-bytes Data Cache –L2:64K-bytes Cache•The performances obtained in Table 2are sensitive to algorithm code placement.Refer the sample linker file provided in the test application setup for algorithm code placement.This is used for profiling in Table 2.•The algorithm uses 6QDMA channels and parameter space equal to 35parameter entries.The algorithm uses DMAN3interface for logical allocation of these channels.•Total data memory for N non pre-emptive instances =Constants +Runtime Tables +Scratch +N *(Instance +I/O buffers +Stack)•Total data memory for N pre-emptive instances =Constants +Runtime Tables +N *(Instance +I/O buffers +Stack +Scratch)•ISO/IEC 14496-10:2005Information technology --Coding of audio-visual objects --Part 10:Advanced Video Coding•H264HD Baseline Profile Encoder on DM6446User's Guide (literature number:SPRUFQ6)TERM DESCRIPTIONConstants Elements that go into .const memory sectionScratch Memory space that can be reused across different instances of the algorithm Shared Sum of Constants and ScratchInstancePersistent-memory that contains persistent information -allocated for each instance of the algorithmACRONYM DESCRIPTIONCIF Common Intermediate Format DMA Direct Memory Access DMAN3DMA Manager EVM Evaluation Module GOP Group of PicturesIDR Instantaneous Decoding Refresh LPF Loop Filter MV Motion VectorQCIF Quarter Common Intermediate Format QDMA Quick Direct Memory Access QPI Quarter Pel Interpolation QVGA Quarter Video Graphics ArraySQCIF Sub Quarter Common Intermediate Format UMV Unrestricted Motion VectorsVGA Video Graphics Array (640x480resolution)XDMeXpressDSP Digital MediaCopyright ©2009,Texas Instruments Incorporated Submit Documentation Feedback5IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements,improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right, or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI.Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use any non-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements.Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers AudioData Converters AutomotiveDLP®Products BroadbandDSP Digital ControlClocks and Timers MedicalInterface MilitaryLogic Optical NetworkingPower Mgmt SecurityMicrocontrollers TelephonyRFID Video&ImagingRF/IF and ZigBee®Solutions WirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2009,Texas Instruments Incorporated。
一种检测内存的方法和装置[发明专利]
专利名称:一种检测内存的方法和装置专利类型:发明专利
发明人:周大山,艾国,凌明
申请号:CN200910084406.1
申请日:20090513
公开号:CN101576838A
公开日:
20091111
专利内容由知识产权出版社提供
摘要:本发明提供一种检测内存的方法和装置,方法包括:步骤一,按照预定顺序,向内存字节中写入预定类型的写入数据;步骤二,按照所述预定顺序从所述内存中获得读出数据,比较所述读出数据与所述写入数据是否相同,是则所述内存正常,否则所述内存出错。
本发明能够更加直观、全面、系统的对内存进行检测。
申请人:北京中星微电子有限公司
地址:100083 北京市海淀区学院路35号世宁大厦15层
国籍:CN
代理机构:北京银龙知识产权代理有限公司
代理人:郭海彬
更多信息请下载全文后查看。
ScanPal EDA61K手持设备使用说明书
Scan Engine Alphanumeric (46-Key) Numeric (34-Key)USB Type C ConnectorEDA61K – Alphanumeric - N6703 - WWAN – Software Client Pack (SCP) Pre-Licensed EDA61K-1AC934PExK EDA61K, Alpha-numeric Keypad, WWAN, 3GB/32GB Memory, N6703 scanengine, 4' LCD WVGA, 13MP Camera, Android GMS, Extended battery7,000mAh, warm swap, NFC, SCP Pre-Licensed (1 Year SCP SoftwareMaintenance)EDA61K – Alphanumeric - N6703 - WiFi Only – Software Client Pack (SCP) Pre-LicensedEDA61K, Alpha-numeric Keypad, WLAN, 3GB/32GB Memory, N6703 scanengine, 4' LCD WVGA, 13MP Camera, Android GMS, Extended battery7,000mAh, warm swap, NFC, SCP Pre-Licensed (1 Year SCP SoftwareMaintenance)EDA61K – Numeric - N6703 - WWAN – Software Client Pack (SCP) Pre-LicensedEDA61K-1NC934PExK EDA61K, Numeric Keypad, WWAN, 3GB/32GB Memory, N6703 scan engine,4' LCD WVGA, 13MP Camera, Android GMS, Extended battery 7,000mAh,warm swap, NFC, SCP Pre-Licensed (1 Year SCP Software Maintenance) EDA61K – Numeric - N6703 - WiFi Only – Software Client Pack (SCP) Pre-LicensedEDA61K-0NC934PExK EDA61K, Numeric Keypad, WLAN, 3GB/32GB Memory, N6703 scan engine,4' LCD WVGA, 13MP Camera, Android GMS, Extended battery 7,000mAh,warm swap, NFC, SCP Pre-Licensed (1 Year SCP Software Maintenance)(Note: x = Domain, select appropriate Domain from Configuration Map on page 3)Honeywell Repair ServicesScan Engine Alphanumeric (46-Key) Numeric (34-Key)USB Type C ConnectorEDA61K – Alphanumeric EX20 - WWAN – Software Client Pack (SCP) Pre-Licensed EDA61K-1AUB34PExK EDA61K, Alpha-numeric Keypad, WWAN, 3GB/32GB Memory, EX20 scanengine, 4' LCD WVGA, No Camera, Android GMS, Extended battery 7,000mAh,warm swap, NFC, SCP Pre-Licensed (1 Year SCP Software Maintenance) EDA61K – Alphanumeric – EX20 - WiFi Only – Software Client Pack (SCP) Pre-LicensedEDA61K, Alpha-numeric Keypad, WLAN, 3GB/32GB Memory, EX20 scanengine, 4' LCD WVGA, No Camera, Android GMS, Extended battery 7,000mAh,warm swap, NFC, SCP Pre-Licensed (1 Year SCP Software Maintenance)EDA61K – Numeric – EX20 - WWAN – Software Client Pack (SCP) Pre-Licensed EDA61K-1NUB34PGxK EDA61K, Numeric Keypad, WWAN, 3GB/32GB Memory, EX20 scan engine,4' LCD WVGA, No Camera, Android GMS, Extended battery 7,000mAh, warmswap, NFC, SCP Pre-Licensed (1 Year SCP Software Maintenance)EDA61K – Numeric – EX20 - WiFi Only – Software Client Pack (SCP) Pre-Licensed EDA61K-0NUB34PExK EDA61K, Numeric Keypad, WLAN, 3GB/32GB Memory, EX20 scan engine, 4'LCD WVGA, No Camera, Android GMS, Extended battery 7,000mAh, warmswap, NFC, SCP Pre-Licensed (1 Year SCP Software(Note: x = Domain, select appropriate Domain from Configuration Map on page 3)Honeywell Repair ServicesWarranty Cover Against Product Defect BASIC S ervice Flexible GOLD Add-Ons ordered separately-MOB3DescriptionSVCEDA61K-EXW2 EDA61K, BASIC, 10-15 Day Turnaround, 2 Years (1 Year Factory Warranty + 1 Year Extended) SVCEDA61K-EXW3 EDA61K, BASIC, 10-15 Day Turnaround, 3 Years (1 Year Factory Warranty + 2 Year Extended) EDA61K, Edge Service, Gold Service Contract, 3 Year, NewLauncher - gives the customer total control over which apps can be run on the device.Part# Description Enterprise Browser provides corporations theability to run standard web applications from acontrolled environment.Terminal Emulator – Full featured SmartTE allows legacygreen screen apps to be transformed to the look and feelof native apps.Part# DescriptionSCP-SFT1 Software Client Pack - 1 Year Maintenance (Launcher, Enterprise Browser & SmartTE) SMARTTE-SFT3 SmartTE – 3 Year SW MaintenanceEDA61K-xxUBxxxxxx No Camera, EX20 EDA61K-xxC9xxxxxx 13MP Camera, N6703 - 15º AnglePart Number DescriptionScan Handle kit for EDA61K. (Field-attachable scan handle). Compatible with Home Base.EDA61K Scan Handle Strap (Pack of 3)DescriptionCBL-500-120-S00-05 Charging and USB communication cable for ScanPal EDA61KUSB type A to type C, 1.2 m (3.9 ft), included with each terminal.Kit includes 5V/2A power adaptor and power plugs forUS, EU, UK, ANZ, and India, included with each terminal.Part Number EDA61K-HS-3PKPart Number Description856-065-004 MICRO-SD CARD, 1GB, AF1GUDI, ROHS856-065-005 MICRO-SD CARD, 2GB, AF2GUDI, ROHS856-065-006 MICRO-SD CARD, 4GB, AF4GUDI, ROHS856-065-007 MICRO-SD CARD, 8GB, AF8GUDI, RoHS For more information on ATP Industrial Grade SD Cards, visitDisclaimerHoneywell International Inc. (“HII”) reserves the right to make changes in specification and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting the furnishing, performance, or use of this material.This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without prior written consent of HII. HII is not responsible for the operation of or information contained at any third party websites referenced herein.Web Address: Android, Google, Bluetooth, and Qualcomm are trademarks or registered trademarks of their respective owners.ScanPal TM EDA61K Configuration Guide - Global | Rev A | 7/20。
DVB-T2 HD 接收机说明书
SHENZHEN KINGTECH TECHNLOGY CO.,LTDAdd: Building 1,HongYe Industry Park, Lezhujiao, BaoAn,ShenZhen,ChinaDVB-T2 HD SPECIFCATIONModel No.PriceMOQDolby AC-3 Payment term ShipmentProduct Description : DVB-T2 HD RECEIVERDelivery time:40 days Days after sample and all artworks confirmed Sample lead time:7 Days Certificate:CE INCLUDEDACCESSORIES:*Remote Control *AC/DC ADAPTOR *AV CABLEC250g color paper and Inside B9 paper /GB Black/While print user manual ( not more than 10pages)Main SPEC& Features:* DVB-T2 HD Receiver with GX6701 Chipset* Without LED display * Fully comply with EWBS system with buzzer function* Dolby AC-3 included* Fully supports DVB-T2/T/C, H.264,HD MPEG 2, MPEG4 Decoder * 4:3PS 、4:3LB 、16:9* Supports 720P,1080i,1080P(FULL HD)* Supports updating software by USB * 2*USB 2.0, Media player for H.264,AVI, MKV, MP3, MP4, JPEG etc.. * 7 days EPG* PVR, Schedule recording* Banner-- time & transparancy control abillity * Support Youtube, Tiktok, Wetv, IPTV, RSS, Weather etc....* Display of signal strongness & quality * Local language MENU,Multi-language OSD * Powerful channel editor functions * Support H.264 & MPEG-2/MPEG4 8bit * Automatic or manual Area serching * TV Format: PAL, NTSC, PAL-M,* Full function Remote Controller.* Time shift function* I/O ports: RF in, Loop Through, HDMI, AV 3.5mm,1* USB input ,DC input Main system Audio/video data in/outCPU GX6701Output:AV Flash Memory 512M bites HDMISDRAM 32M bites Tuner R836 or R850 with amplifier Tuner & Demodulator Power supplyANT. Connector IEC TYPE, female Input voltage:5V/1.5A Loop Outpur IEC TYPE, male Consumption:Max. 6WInput Frange range 170~230MHz ,470~860MHz Protection:Separate fuse & chassis ground Input Impedance 75 Ωor electric shock protection Input Signal level 78 dBm to -20 dBm (average power)IF Bandwidth 7MHz and 8MHz Mpeg Audio/ Vedio Decocding Operation Enviroment:Video MPEG 2(ISO/IEC 13818-2)MPEG-4 (ISO/IEC14496)Operation tempreture +5℃~55℃H.264 (ISO/IEC14496-10)Storage tempreture -40℃~ +65℃Profile LevelHD MPEG 2, MPEG4 HP@L4, MP@L3MPEG-4 ASP D1(720*480*30/720*576*25)Input rate Max. 60M bits DimensionAspect ratio 4:3, 16:9, letter box Size (W*D*H):90*64*26MM Video Resolution 480i/576I /720P/1080i/1080P(FULL HD)Gift box:155*120*50mmAudio decoding MPEG-1(Layer1&2&3)/,MP3Carton:530*320*220mm 40PCS/Carton Audio mode Mono/Joint Stereo/Stereo/Dolby AC-3N.W:9.63KG G.W:10.27KGAudio standard: ISO/IEC 14.496-3loading continer:34000PCS/20GP, 75000PCS/40GP。
Siglent LPA10 TPA10探头适配器说明书
LPA10 / TPA10数据手册CN01B产品概述LPA10 / TPA10专为适配其它示波器厂商的有源探头而设计。
具备SAPBus有源探头接口的鼎阳示波器搭配LPA10 / TPA10探头适配器,可以兼容一些其它接口的有源探头,帮助用户利用闲置资源,节约成本。
LPA10用于适配力科公司的Probus接口的有源探头。
配合正确的示波器固件版本,接入的力科探头可自动识别型号并设置相应的衰减比例;TPA10用于适配泰克公司的TekProbe interface level II接口的有源探头。
这两款探头适配器为探头提供供电和直流偏置,无需外接电源或其它电路。
LPA10 / TPA10 探头适配器LPA10 规格注:不可识别的探头也可使用,但需要手动设置探头衰减比例。
LPA10 / TPA10 探头适配器TPA10 规格LPA10 / TPA10 探头适配器关于鼎阳鼎阳科技(SIGLENT)是通用电子测试测量仪器领域的行业领军企业。
同时,也是通用电子测试测量仪器行业第一家A 股上市公司。
2002年,鼎阳科技创始人开始专注于示波器研发,2005年成功研制出第一款数字示波器。
历经多年发展,鼎阳产品已扩展到数字示波器、手持示波表、函数/任意波形发生器、频谱分析仪、矢量网络分析仪、射频/微波信号源、台式万用表、直流电源、电子负载等基础测试测量仪器产品,是全球极少数能够同时研发、生产、销售数字示波器、信号发生器、频谱分析仪和矢量网络分析仪四大通用电子测试测量仪器主力产品的厂家之一,是这四大主力产品领域唯一一个国家级重点“小巨人”企业。
公司总部位于深圳,在美国克利夫兰和德国奥格斯堡成立了子公司,在成都成立了分公司,产品远销全球80多个国家和地区,SIGLENT 已经成为全球知名的测试测量仪器品牌。
联系我们深圳市鼎阳科技股份有限公司 全国免费服务热线:400-878-0807 网址:技术许可对于本文档中描述的硬件和软件,仅在得到许可的情况下才会提供,并且只能根据许可进行使用或复制。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
80KB LCD CONTROLLER/DRIVER1. GENERAL DESCRIPTIONThe GPL61A, an 8-bit CMOS single chip microprocessor, contains RAM, ROM, I/Os, interrupt/wakeup controller, 8-bit PWM audio output, UART and automatic display controller/driver for LCD. With a dual channel PWM driver, attractive sound effects can be generated easily. A built-in UART speeds up data transmission between two chips. Furthermore, a software controllable standby switch is also built-in to save power consumption. The great amount of ROM can be used to store both program and audio data. (The speech duration is approximately 18 seconds at 7KHz sampling rate by using 4-bit ADPCM). The GPL61A is designed with state-of-the-art technology to fulfill the requirements of LCD applications especially hand-held products.2. BLOCK DIAGRAMROSC X32I X32OIOCD3 - 0(I/O)IOEF3 - 0(I/O)AUDPAUDNTxD/IOEF4RxD/IOEF5SEG39 - 0COM15 - 0Note1: IOAB3 - 0 can be enabled by mask option from Segment 39 - 36.Each I/O(segment) can be mask optioned individually.Note2: TxD and RxD can be optioned to IOEF5 - 4 when UART is not used.3. FEATURESBuilt-in 8-bit processor─ 496 bytes SRAM ─ 80K bytes ROM─ Max. operating speed: 3.0MHz @ 2.6V─ CPU clock is software programmable, can be 1/2, 1/4, 1/8 or 1/16 of R-oscillator’s clock frequency ─ Key wake-up─ Provide 8 interrupt sources Asynchronous serial interface─ Supports bit rates up to 115.2 Kbps Programmable LCD driver─ Up to 40 segments, up to 16 commons, maximum 640 dots ─ 1/4 or 1/5 bias capability ─ 1/8, 1/12 or 1/6 duty─ 80 bytes dedicated LCD RAM─ LCD com/seg driving strength can be adjusted tocompromise the display quality and current consumption ─ Built-in voltage doubler and voltage regulator to generateVLCD for LCD driver─ 16-level VLCD adjustable (3.3V - 4.8V) Power saving SLEEP mode Low voltage detector ─ 2.6V and 2.4V detection Peripherals─ 8 I/O pins (IOEF3 - 0, IOCD3 - 0)─ 4 I/O pins shared with LCD segments (mask option) ─ Extra 2 I/O pins (IOEF5 - 4) when UART is not used (mask option)─ Extra 2 I/O pins (IOEF7 - 6) when LCD is in 1/8 or 1/12 duty (mask option) ─ Built-in 32.768KHz oscillator circuit for real time clock function─ Built-in R-oscillator (only one resistor is needed) ─ Internal time base generator ─ Two 16-bit reloadable timer/counters ─ 8-bit resolution, 2-channel PWM outputs (can drive speaker or buzzer directly) ─ Watchdog Timer for reliable operation Wide operating voltage: ─ 2.4V - 3.6V @ 1.0MHz ─ 3.6V - 5.5V @ 1.0MHz Low-power consumption:─ 1mA typical @ 3.0V, F CPU = 1.0MHz ─ <1µA typical standby current @ 3.0V4. SIGNAL DESCRIPTIONSMnemonic PINNo. Type DescriptionSEG39 - 37 SEG36 SEG35 - 0 79 - 8117 - 42O LCD driver segment output. SEG39 - 36 can be optioned toIOAB3 - 0. Port AB is a bi-directional I/O port.COM15 - 14 COM13 - 0 67 - 6856 - 43O LCD driver common output. COM15 - 14 can be optioned toIOEF7 - 6. Port EF is a bi-directional I/O port.IOEF3 - 0 71 - 74 I/O Port EF is a bi-directional I/O port, can be software programmed as wake up I/O. IOCD3 - 0 75 - 78 I/O Port CD is a bi-directional I/O port.RxD 69 I UART input. Can be optioned to IOEF5TxD 70 O UART output. Can be optioned to IOEF4ROSC 66 I ROSC input, connect to VDD through a resistorRESET 60 I System reset input, low active.AUDP AUDN 24O PWM audio outputX32I 63 I 32.768KHz crystal input or connect to VDD through a resistor (option)X32O 62 O 32.768KHz crystal outputTEST 61ITestinputVLCD 64 P LCD voltage. Connect to VSS through a capacitor if voltage doubler is enabled. HVLCD 59 P LCD voltage generation. Connect to VSS through a capacitor if voltage regulator isenabled.CUP1 CUP2 5857P LCD voltage generation. Charge pump capacitor interconnection pinsVDD 65 P Power supply voltage inputVSS 6PGroundreference AVDD 3PAnalogpower AVSS 5PAnaloggroundreference Legend: I = Input, O = Output, P = Power5. FUNCTIONAL DESCRIPTIONS5.1. ROM AreaGPL61A is a large ROM based micro-controller with 640 dots LCD driver. The large ROM can be defined as program ROM, LCD fonts and audio data continuously without any limitation. To access the ROM area, users should first program the BANK SELECT Register ($07) and then access the bank#1 or bank#2 by addressing the higher bank address, $8000 - $FFFF, to fetch data.5.2. Map of Memory and I/Os*NMI SOURCE:*INT SOURCE:*I/O PORT:─ INT1 ( from TIMER 1 )H/W registers , I/Os$00000* MEMORY MAP WORKING SRAM(192 bytes)$0003F SRAM for STACK and Data Storage (304bytes)$00040GENERALPLUS TESTPROGRAM $000FF $00100ROM BANK #1$0022F $00400ROM BANK #2UNUSEDUSER's PROGRAM DATA AREA ROM BANKLCD Buffer ( 80 bytes)$00300$0037F $007FF $00800$07FFF $08000$0FFFF $10000$13FFF $14000$17FFF─ I/O AB_CTRL $0001─ PORT IOAB $0002─ PORT IOEF $0004─ PORT IOCD $0003─ I/O CD_CTRL $0000─ I/O EF_CTRL $0006─ INT0 ( from TIMER 0 )─ INT1 ( from TIMER 1 )─ 2 KHz─ T2 Hz ( 2Hz / 1 Hz)─ T16 Hz ( 4Hz/8Hz/16Hz/32Hz )─ 128 Hz─ EXT INT ( from IOCD0 pin )─ UARTNote: $7FFA - $7FFF in ROM bank#0, and $FFFA - $FFFF in bank#1 - 2are reserved for reset vectors.$7FF2 - $7FF7 in bank#0, and $FFF2 - $FFF7 in bank#1 - 2 are reserved for testing.5.3. Operating StatesThe GPL61A supports three operating states: standby, halt, and operating. Following table shows the differences between the three operating states. Operating Halt Standby CPUON OFF OFF 32768 oscillator ON ON OFF LCD driver ON ON/OFF OFFIn operating state, all modules (CPU, 32768 oscillator, timer/counter, LCD driver…) are activated. The halt/standby state is entered by writing to SLEEP register ($09). There are four wake-up sources in GPL61A: port IOEF wake-up, TIMR0 wake-up, 4Hz/8Hz/16Hz/32Hz wake-up and 2Hz/1Hz wake-up. If any wake-up event occurs, execution of the next instruction continues in the operating state.When in standby, all modules will be shut down, and RAM and I/Os remain in their previous states. The current consumption isminimized in standby. By writing to SLEEP register but keeps 32768 oscillator running, the system is in halt state. In halt state, CPU clock is halted while it waits for an event (key press, timer overflow) to generate a wake-up. The 32768 related modules (timer/counter, LCD driver…) may remain active in the halt state. Following figure is a state diagram for the GPL61A.State Diagram of GPL61A5.4. Speech and MelodySince GPL61A provides large ROM and wide range of CPU operating speed, it is the most appropriate IC for speech and melody synthesis. For speech synthesis, GPL61A provides several timer interrupts for precise sampling frequency. Users can record or synthesize the sound and digitize it into the ROM. The sound then can be played back in the sequence assigned by users’ programs. Several algorithms are recommended for highfidelity and good compression of sound: such as PCM andADPCM.For melody synthesis, GPL61A provides the dual tone mode. Once in the dual tone mode, users only need to program the tonefrequency of each channel by writing to timer/counter TM0 and TM1, and set the envelope of each channel. The hardware will toggle the tone wave automatically without users’ care.5.5. LCD Controller/DriverGPL61A contains total of 640 dots LCD controller and driver. Programmers can set the LCD configuration (bias, duty, voltage doubler) by writing to LCD control register ($20). Once the LCD configuration is initialized, the desired pattern can be displayed by filling the LCD buffer with appropriate data. The LCD driver can also operate during sleep by keeping 32768 oscillator running. The LCD driver in GPL61A is designed to fit most LCD specifications. It can either be programmed as 1/4 or 1/5 bias and the duty is also programmable as 1/8, 1/12, or 1/16 duty.5.6. Voltage Doubler/RegulatorGPL61A also contains a built-in voltage doubler and a voltage regulator. The voltage regulator provides a reference voltage (HVLCD) for voltage doubler to generate VLCD (by charge-pumping). Users can get desired VLCD by changing the output reference voltage (writing to $23) of the voltage regulator. By enabling the voltage doubler and regulator, users can get a stable VLCD that will not be affected by VDD. The three possible configurations of voltage doubler and regulator are shown in the following table.Regulator DoublerVLCDOFF OFF VDD (not regulated)OFF ON 2*VDD (not regulated) ON OFF N/AONON3.3V -4.8V adjustable5.7. PWM OutputInternally, GPL61A has one pair of PWM outputs with two sound channels. Each channel can be set to play speech or tone individually. GPL61A uses Pulse Width Modulation that could directly drive speaker or buzzer without any buffer or amplification circuit.5.8. Asynchronous Serial InterfaceGPL61A supports 1-channel UART for serial communications. It supports bit rates up to 115.2kbps. UART operation is controlled by UART command registers $29 and $2A. Configurations such as Tx/Rx interrupt, parity check, parity even/odd and clock source can be set in command registers. Two interrupts are generated by Rx and Tx. The Rx or Tx interrupt asserts when a byte is received or transmitted. By reading the status register $2A, users can tell whether the interrupt is generated by Rx or Tx. Framing, overrun and parity errors are detected as each byte is received. All error status can be read from status register $2A.The UART supports clock auto calibration. If this clocking scheme is selected, standard baud rates from 1.2kbps to 115.2kbps are available. The baud rate is selected by writing to baud rate control registers $2E and $2F. The supported standard baud rates and their minimum R-oscillator clock frequency required are shown in the following table.Baud Rate(bps)Min. Frosc(Hz)1200 24000 2400 48000 4800 96000 9600 19200019200 384000 38400 768000 51200 1024000 57600 1152000 102400 2048000 115200 2304000If the auto calibration clocking scheme is not selected, users can get desired baud rates by writing appropriate values to prescalerregisters, $2C and $2D. Non-standard baud rates can beobtained this way. When using non-calibration mode, one shouldaware that the frequency of R-oscillator may alter due to manufacturing process variations, supply voltage, operating temperature and tolerance of external R components used.5.9. Low Voltage DetectionThe GPL61A provides a 2.6V/2.4V voltage detector to detect a low voltage event. Users can turn on 2.6V detection and read bit1 of port $24 periodically to monitor if VDD is lower than 2.6V. In addition, if 2.4V detection is turned on and VDD drops below 2.4V, after a SLEEP command is issued, system will shut down all activities(LCD bias, LCD display, 32768 oscillator) and enters standby to reduce current consumption. This low voltage power down can be awakened by a PEF0 key change or RESET. Users can use this feature to implement low battery check/battery change function.State Diagram of Low Voltage Power Down5.10. Watch Dog Timer (WDT) 5.11.3. TxD/RxD selectAn on chip watchdog timer is available on GPL61A. The WDT is designed for recovering from system abnormal operation. If the system is hanged, WDT will generate a system reset to restart system after 1 second. If WDT is enabled, the WDT should be cleared every 0.5 seconds to avoid accidental reset. The WDT can be cleared by writing to $0F. Note that the WDT only works when 32768Hz clock is available. 1). TxD as UART transmit output, RxD as UART receive input2). TxD as I/O port EF4, RxD as I/O port EF55.11.4. Port EF Bit7 - 0 with 600KΩ pull-low1). Each bit can be optioned to Enable/Disable individually.5.11.5. I/O and LCD driver1). COM15 -14 can be optioned to IOEF7 - 6 when LCD mode is1/8 duty or 1/12 duty.5.11. Mask Options5.11.1. 32768 oscillator2). SEG39 - 36 can be optioned to IOAB3 - 0 individually.1). X’TAL2). R-oscillator5.11.2. Watchdog timer1). Enable2). Disable6. ELECTRICAL SPECIFICATIONS6.1. Absolute Maximum RatingsCharacteristics Symbol RatingsDC Supply Voltage V + < 7.0V Input Voltage Range V IN -0.5V to V + + 0.5V Operating Temperature T A 0℃ to +60℃ Storage TemperatureT STO-50℃ to +150℃Note: Stresses beyond those given in the Absolute Maximum Rating table may cause operational errors or damage to the device. For normal operationalconditions see AC/DC Electrical Characteristics.6.2. DC CharacteristicsLimitCharacteristics Symbol Min. Typ. Max. Unit Test Condition2.4 -3.6 V For 2-battery Operating Voltage VDD3.6 - 5.5 V For 3-batterOperating Current I OP - 1.0 - mA F CPU = 1.0MHz @ 3.0V, no load Standby Current I STBY - 1.0 2.0 µA VDD = 3.0V, 32768Hz OFF - -20 - mA VDD = 3.0V, V OH = 2.5V Audio Output CurrentI OH- -40 - mA VDD = 3.0V, V OH = 2.0V - 25 - mA VDD = 3.0V, V OL = 0.5V Audio Output Current I OL-50-mAVDD = 3.0V, V OL = 1.0V VLCD VariationV LCD_VAR - ±0.2- VVDD = 2.6V - 5.0VVLCD = 4.5VLCD bias strength = $04,no LCD panel appliedInput High Level V IH 2.0 - - V VDD = 3.0V Input Low Level V IL--0.8VVDD = 3.0V Output High Current (I/O)I OH - -800 - µAVDD = 3.0V V OH = 2.4V Output Sink Current (I/O)I OL - 1000 - µAVDD = 3.0V V OL = 0.8VOSC Resistor R OSC - 220K - ohm F OSC2 = 2.0MHz @ 3.0V CPU ClockF CPU - - 3.0 MHz F CPU = F OSC2 /2 @ 2.6VNote1: V LCD variation is subject to change due to the variation of process, temperature, supply voltage and loadings.Note2: When voltage regulator and voltage doubler are enabled, VDD should be lower than V LCD to prevent forward biasing the p-n junction of I/O’s outputPMOS.7. APPLICATION CIRCUITS7.1. 640 Points LCD Driver, 40 Segments X 16 Commons, 32768 Mask Option X’TALNote1: IOEF4, IOEF5 are shared with TxD, RxD(UART), if UART is not used, these two pins can be used as I/O ports Note2: These capacitors must be connected if voltage doubler and voltage regulator are used.Note3: Wire route path from capacitors (C6 - 1) to chip should be as close as possible.7.2. 640 Points LCD Driver, 40 Segments X 16 Commons, 32768 Mask Option R-OscillatorNote1: IOEF4, IOEF5 are shared with TxD, RxD(UART), if UART is not used, these two pins can be used as I/O ports Note2: These capacitors must be connected if voltage doubler and voltage regulator are used.Note3: Wire route path from capacitors (C6 - 1) to chip should be as close as possible.7.3. Serial Communications between two GPL61As8. PACKAGE/PAD LOCATIONS8.1. PAD AssignmentThis IC substrate should be connected to VSSNote1: The 0.1µF capacitor between VDD and VSS should be placed to IC as close as possible.8.2. Ordering InformationProduct Number Package Typeform GPL61A-NnnV-C Chip Note1: Code number is assigned for customer.Note2: Code number (N = A - Z or 0 - 9, nn = 00 - 99); version (V = A - Z).8.3. PAD LocationsPAD No. PAD Name X Y PAD No. PAD Name X Y1 SEG36 -1420 1110 42 SEG0 1416 -11312 AUDP -1416 905 43 COM0 1416 -9863 AVDD -1416 785 44 COM1 1416 -8514 AUDN -1416 665 45 COM2 1416 -7245 AVSS -1416 545 46 COM3 1416 -6016 VSS -1416 440 47 COM4 1416 -4817 SEG35 -1416 320 48 COM5 1416 -3618 SEG34 -1416 200 49 COM6 1416 -2419 SEG33 -1416 80 50 COM7 1416 -12110 SEG32 -1416 -40 51 COM8 1416 -111 SEG31 -1416 -160 52 COM9 1416 11912 SEG30 -1416 -280 53 COM10 1416 23913 SEG29 -1416 -400 54 COM11 1416 35914 SEG28 -1416 -520 55 COM12 1416 47915 SEG27 -1416 -640 56 COM13 1416 59916 SEG26 -1416 -760 57 CUP2 1416 72117 SEG25 -1416 -880 58 CUP1 1416 84918 SEG24 -1416 -1000 59 HVLCD 1416 98419 SEG23 -1401 -1131 60 RESET 1416 112920 SEG22 -1261 -1131 61 TEST 1276 112921 SEG21 -1133 -1131 62 X32O 1156 112922 SEG20 -1013 -1131 63 X32I 1036 112923 SEG19 -893 -1131 64 VLCD 916 112924 SEG18 -773 -1131 65 VDD 796 112925 SEG17 -653 -1131 66 ROSC 666 111026 SEG16 -533 -1131 67 COM15 539 111027 SEG15 -413 -1131 68 COM14 404 111028 SEG14 -293 -1131 69 RXD 277 111029 SEG13 -173 -1131 70 TXD 142 111030 SEG12 -53 -1131 71 IOEF3 15 111031 SEG11 67 -1131 72 IOEF2 -120 111032 SEG10 187 -1131 73 IOEF1 -247 111033 SEG9 307 -1131 74 IOEF0 -382 111034 SEG8 427 -1131 75 IOCD3 -509 111035 SEG7 547 -1131 76 IOCD2 -641 111036 SEG6 667 -1131 77 IOCD1 -768 111037 SEG5 787 -1131 78 IOCD0 -911 111038 SEG4 907 -1131 79 SEG39 -1038 111039 SEG3 1027 -1131 80 SEG38 -1166 111040 SEG2 1147 -1131 81 SEG37 -1293 1110-11311276SEG1419. DISCLAIMERThe information appearing in this publication is believed to be accurate.Integrated circuits sold by Generalplus Technology are covered by the warranty and patent indemnification provisions stipulated in the terms of sale only. GENERALPLUS makes no warranty, express, statutory implied or by description regarding the information in this publication or regarding the freedom of the described chip(s) from patent infringement. FURTHERMORE, GENERALPLUS MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. GENERALPLUS reserves the right to halt production or alter the specifications and prices at any time without notice. Accordingly, the reader is cautioned to verify that the data sheets and other information in this publication are current before placing orders. Products described herein are intended for use in normal commercial applications. Applications involving unusual environmental or reliability requirements, e.g. military equipment or medical life support equipment, are specifically not recommended without additional processing by GENERALPLUS for such applications. Please note that application circuits illustrated in this document are for reference purposes only.10. REVISION HISTORYDate Revision# Description PageMAR. 23, 2005 1.0OriginalNote: The GPL61A data sheet v1.0 is a continued version of SPL61A data sheet v1.2. 13。