中英文内容摘要和关键字
3、中英文摘要及关键词
论文题目(三号黑体,加粗,居中)——如有副标题(五号黑体,常规,居中)(空一行)摘要(小四号黑体加粗,居左空两格):×××××××××××××××(五号宋体,常规,单倍行距)(空一行)关键词(小四号黑体加粗,居左空两格):×××;××;×××××(五号宋体,常规,单倍行距)要求:1.中文摘要、关键词和英文摘要、关键词均需另起一页,分页打印。
2.中文摘要、关键词题头用小四号黑体,加粗,居左空两格排写;内容部分用五号宋体字,常规,单倍行距。
关键词各词条间用分号“;”隔开。
摘要、关键词之间空一行。
3.英文摘要、关键词题头用小四号Times New Roman加粗, 居左空两格排写;内容部分用五号Times New Roman,常规,单倍行距。
关键词各词条间用分号“;”隔开。
摘要与关键词之间空一行。
(英文题目)(居中)Abstract:Lao She's attitude towards this typical image of Xiangzi is very complicated: On one hand he has offered the abundant affirmation to Xiangzi's innate bright quality , on one hand individual struggled the blindness of the road was denied to Xiangzi; He offer deep sympathy by unfortunate life to Xiangzi on one hand, awakening go on the deep criticism to Xiangzi on the other hand. Meanwhile, between author and that piece bad person become dark society of spirit go on the merciless revealing and accusation too itself. Affirm and deny , sympathize with and criticize coexisting , make the works already have abundant realistic intension, different from the general realistic works again.Key words:Xiangzi;affirm;deny;sympathize;criticize coexisting。
完整英文摘要
完整英文摘要第一篇:完整英文摘要lee's culture is located in the west of Long shan mountain, WeiShui river of the ancient county, is one of the cradles of Chinese ancient civilization, and also the birthplace of The lee.With Dunhuang culture, Tianshui fuxi culture, LaBuLengSi Tibetan Buddhism culture is one of four culture of Gansu province.But at present, the cultural development of West gansu is lagging behind, a lot of development and utilization of resources is difficult to get, it has to do withWest gansu geographical position relatively closed, human resources development has a close relationship.Lee's culture as an important form about culture, also suffered a bottleneck in its development, lee's cultural history and contemporary development not well together, especially in the promotion and development of invested is not enough, lead to lee's culture has been difficult to familiar to the general public.Local economic backward culture is difficult to promote the development process.Fully realize the importance of West gansu lee culture, reasonable and effective development of lee's culture, make its internal value have spread wider, deeper reach to culture to promote economic and cultural development dual goal.Cultural characteristicscountermeasuresThe economicdevelopment第二篇:摘要英文摘要温度是生产过程中常见和重要的物理参数。
最新中英文摘要及关键词格式模板
附件3中文题目(居中)摘要:×××××(摘要内容用小四号宋体字书写,每行与冒号对齐;行距为固定值22磅)×××××关键词:×××××(关键词内容用小四号宋体字书写,每行与冒号对齐;行距为固定值22磅;关键词之间用分号相隔。
)×××××注:①格式模板中的说明(红色或蓝色字体表示),在参阅后请删除。
②中文摘要及关键词项目排版要求:中文摘要及关键词项目要求独占一页。
其中,中文大标题(课题题目)用二号黑体字居中书写,上空1.5行,下空1行;摘要两字用四号黑体字顶格书写,摘要内容用小四号宋体字书写,每行与冒号对齐,行距为固定值22磅;关键词三字用四号黑体字顶格书写,关键词内容用小四号宋体字书写,每行与冒号对齐;行距为固定值22磅。
英文题目(Times New Roman字体)Abstract:abcdefghijk(英文摘要内容用小四号Times New Roman字书写,每行与冒号对齐;行距为固定值22磅)×××××Keywords:abcdefghijk(英文关键词内容用小四号Times New Roman字书写,每行与冒号对齐;行距为固定值22磅;关键词之间用分号相隔)×××××注:①格式模板中的说明(红色或蓝色字体表示),在参阅后请删除。
②英文摘要及关键词项目排版要求:英文摘要及关键词项目要求独占一页。
其中,英文大标题(课题题目)用二号Times New Roman字居中书写,上空1.5行,下空1行;Abstract用四号Times New Roman字顶格书写,摘要内容用小四号Times New Roman字书写,每行与冒号对齐,行距为固定值22磅;Keywords用四号Times New Roman字顶格书写,关键词内容用小四号Times New Roman书写,每行与冒号对齐;行距为固定值22磅。
毕业论文标题中英文摘要关键词和目录的格式
毕业设计(论文)新民本主义:传统民本思想与现代民主理念的契合(字体:黑体小一)专业年级学生学号学生姓名指导老师评阅人二○○年月中国·南京摘要(“摘要”两字的字体为黑体三号,居中。
)正文字体均为:宋体小四号,行距为倍(不低于400字)关键词:民本;民主;新民本主义(“关键词”三字字体为黑体,内容(3-5)个,宋体小四号。
各关键词之间用;)注意:摘要和关键词只能单独一页.Abstract(“Abstract”一词用Times New Roman字体三号,加黑,居中。
)Thought of people as the center is the marrow of our traditional culture and the core of the theory of managing state affairs. It germinates in the early state of antiquity society and is based on patriarchal clan system. It is also a kind of value seeking for the realization of the ethic reason and moral justice. Its basic thinking is that the monarch is defined by people and conversely people are defined by the monarch. At first appearance, its purpose is to value people’s suffering,fate and interest on the ruler’s position. However, its real intention is to fool the people so as to strengthen and consolidate the ruler’s rule. The theory of “people-oriented concept” includes nine topics such as “the theory of people is being the root of the monarch’s rule”, “the theory of people is being more valuable than the monarch”, “the theory of the monarch is being people’s servant”and so on. People –oriented means “value the people ”in essence, which sees “people”as its foundation of politics rule, ranking official, and administration.(正文字体为:Times New Roman字体,小四号,且行距为单倍或倍。
中英文内容摘要和关键词
摘要随着新技术的进步发展和用户需求的不断丰富提升,许多原有的软件系统在性能和交互性方面变得逐渐落后,不能满足用户日益增长的使用要求。
在Internet广泛应用于每一个领域的今天,使用WEB作为应用程序的表现层成为广大用户的要求。
而在众多的WEB应用程序中,一种被称为富互联网应用程序(Rich Internet Application,简称RIA)的具高度互动性和丰富用户体验的网络应用程序正蓬勃发展,受到了广泛的好评。
其中Adobe公司推出的Flex技术表现尤为突出,其动态华丽的页面,灵活多变的交互性,获得了越来越多用户的喜爱。
丰富互联网应用程序技术结合了桌面应用程序的反应快及交互性强的优点与网络应用程序的传播范围广及容易传播的特性。
采用丰富互联网应用程序技术,网络应用程序可以提供更具有交互性和响应性的用户体验,另外还可以通过将部分功能分配给客户端来减轻服务器的压力,其研究是非常有意义的。
Adobe Flex则是一套完整的综合性RIA技术解决方案,Flex提供了一种高效的开发模型,能够很容易地与过去很多年积累下来的标准及最佳实践相集成。
Flex开发模型使用MXML来设计和布局用户界面,ActionScript来创建客户端逻辑。
本文在介绍了RIA的产生、优势、发展状况及应用前景,并对RIA的相关技术进行了讨论,主要讲解了Flex技术的优点、特点、工作原理等相关知识。
本文还对二维条码技术的概念、技术特点、优势以及其发展现状作了简要的说明。
最后重点讲述了利用Flex 技术实现了二维条码的动态显示的原理及过程。
关键字:Rich Internet,Application(RIA),Flex,二维条码AbstractWith the development of new technology and constantly upgraded requirements of users, many of the existing software system are becoming progressively backward on performance and interaction; they cannot satisfy the increasing requirements of the users any longer.Today, the Internet is widely used in every area; it's the majority of user requirements to use the web as the representation of a system. Among the many web applications, there is one that went by the name of Rich Internet Applications (for short RIA) with highly interactive and rich user experience is booming, it has been widely acclaimed. And the Adobe Flex technology is particularly prominent, more and more users are attracted by the dynamic magnificent pages, the interactive agility of Flex.The rich Internet application procedure technology unified the characteristic which the tabletop application procedure response quick and the interaction strong merit and the network application procedure dissemination scope broad and is easy to e the rich Internet application procedure technology, the network application procedure may provide the interactive and the responsive user experience, moreover also may through assign the partial functions for the customer end reduces the server pressure, its research is extremely significant.Adobe Flex is the most comprehensive solution for delivering RIAs across the enterprise and over the Web.Flex provides a highly productive development model that easily integrates with existing processes and is based on standards and best prances that have emerged over the last ten years of Internet development.The Flex development model uses MXML for user interface design and layout and an implementation of ECMAScript for client logic.This article was introducing the RIA production, the superiority, thedevelopment condition and the application prospect, and have carriedon the discussion to the RIA related technology, mainly explainned theFlex technology merit, the characteristic, the principle of work andso on the related knowledge.This article also to the two-dimensional bar code technology concept,the technical characteristic, the superiority has given brief showing by and its the development present situation. Finally narrated with emphasis has realized the two-dimensional bar code dynamic demonstration principle and the process using the Flex technology.Keyword: Rich Internet Application(RIA),Flex,two-dimensional bar code。
4、中英文摘要及关键词
英语国家学生汉语介词“在”的偏误分析(标题宋体三号加黑)(一个空格)——副标题(宋体小4号)摘要(宋体小4号加黑):调查了母语为英语的学生有关汉语介词“在”使用方面的偏误,并以此为出发点,通过汉、英对比,分析“在”和相应的英语对译介词在语义、句法、语用上的区别和联系,考察汉英之间的本质区别以及“在”的特点,目的在于让留学生体会汉英两种语言对同一现象的不同表达方式,从而使学生减少偏误,提高学习效率。
(摘要正文宋体小四号)(一个空格)关键词(宋体小4号加黑):英语国家学生;现代汉语介词“在”;偏误分析;母语迁移(关键词正文宋体小四号)The Influences of English on the Errors of Zai Made byEnglish Speakers(英文题目)(首字母大写标题三号(机动,字号依据题目长短而定)Times New Roman加黑)(一个空格)Abstract(小四号Times New Roman加黑):Abstract : This paper investigates the errors of zai made by the English speakers, then contrasts the resemblances and differences between Chinese and English and discusses the distinct features of zai. The aim is to enable English speakers realize the different methods of expression for similar phenomenon, and minimize their errors in expression, hence promote their learning efficiency.(英文摘要正文小四号Times New Roman)(一个空格)Key Words(小四号Times New Roman加黑):English Speakers ; Chinese Preposition zai ; Error Analysis ; Transfer of English(英文关键词小四号Times New Roman,首字母不大写)。
南开大学毕业论文格式要求
附件1:南开大学毕业论文(设计)格式要求一、毕业论文(设计)格式毕业论文(设计)结构一般由封面、中英文内容摘要及关键词、目录、正文、附录、参考文献、致谢等组成。
毕业论文(设计)一律采用打印形式,编排装订顺序依次为:(1)封面(2)中英文内容摘要及关键词(3)目录(4)正文(5)附录(6)参考文献(7)致谢(8)毕业论文(设计)题目审批表(9)毕业论文(设计)中期检查表(10)毕业论文(设计)指导教师评语及打分表(11)毕业论文(设计)答辩记录及打分表。
1. 封面使用教务处统一制作的封面,修双学位学生第二学位论文(设计)使用专用封面(可在教务处主页下载)。
2. 中英文内容摘要及关键词“摘”“要”中间空两格、四号字、黑体、居中。
“Abstract”为四号Times New Roman、黑体、居中。
中文摘要的内容用小四号字、宋体;英文摘要的内容用小四号Times New Roman。
关键词:中文字体为小四号宋体,各关键词之间要有分号,“关”“键”“词”顶格写、小四号、黑体;英文字体为小四号Times New Roman。
3. 目录“目录”二字用三号字、黑体,居中书写,“目”与“录”之间空两格。
目录的各章节应简明扼要,其中每章题目采用小三号宋体字,每节题目采用四号宋体字。
要注明各章节起始页码,题目和页码之间用“…………”连接。
4. 正文(1)正文用小四号、宋体,行间距为1.5倍行距。
(2)注释一律采用页末注(脚注),而不是行中注和篇末注。
在同一页中有两个或两个以上的注释时,按先后顺序编注释号,采用阿拉伯数字,编在右上角,如×××[1],隔页时,注释号需从头开始,不得连续。
注释内容当页写完,不得隔页,采用小五号宋体。
(3)毕业论文(设计)正文数字标题书写顺序依次为:一、(一)1. (1) ①。
(4)公式a.公式应另起一行写在稿纸中央。
一行写不完的长公式,最好在等号处转行,如做不到这一点,可在数学符号(如“﹢”、“﹣”号)处转行。
中英文摘要和关键词
自20世纪70供了契机,并可能成为21世纪的支柱产业。
随着转基因技术的迅速发展及其在农业生产应用范围的扩大,转基因农产品安全性逐渐成为人们关注的热点。
与此同时,随着转基因农产品产量增加,转基因农产品也逐渐成为重要的贸易商品,进而使转基因技术安全性问题渗透到贸易领域,转基因产品安全性和贸易问题更加复杂化,引起的贸易纠纷越来越多。
并随着转基因产品贸易范围扩大,国际影响也越来越大。
……商业化 技术壁垒AbstractThe industry of contemporary biological technology, which focuses on Genetically Modified (GM) technology, has been greatly developing since the 1970s. It provides opportunities for solving the problems such as human expanding, less supplies of foodstuff, short of resources, environment pollution, energy crisis and so on. It may also become the primary industry in the 21st century.With the rapid development of GM technology and its widely uses in agricultural production, the safety of Genetically Modified Organisms (GMOs) has become a hot topic among public. Moreover, with the yield increase of GMOs, it is becoming a crucial commodity in the international trade. Furthermore, the safety of GM technology is【Key。
中英文长摘要规范
长摘要规范1、文摘篇幅:中文长文摘字数要求在1000字以上。
英文长文摘内容与中文对应。
2、文摘结构:(1)目的——研究、研制、调查等的前提、目的和任务,所涉及的主题范围;(2)方法——所用的原理、理论、条件、对象、材料、工艺、结构、手段、装备、程序等;(3)结果——实验的、研究的结果,数据,被确定的关系,观察结果,得到的效果,性能等;(4)结论——结果的分析、研究、比较、评价、应用,提出的问题,今后的课题,假设,启发,建议,预测等;(5)其他——不属于研究、研制、调查的主要目的、方法和结论,但具有创新性和学术交流价值的重要内容。
3、文摘内容文摘要突出作者原创性工作,应排除本学科领域已成为常识的内容,不得简单重复题名中已有的信息,也不得与引言相混。
文摘要着重反映出文章的创新、独到之处,尽量删除背景信息或过去的研究,只叙述新信息和发现、最关键的数据等。
另一方面,不得将未来计划等原文献本身未含的信息或主张写入文摘之内。
文字简洁,取消不必要的字句(例如:In this paper、in detail、briefly、mainly、not only… but also等)尽量简化一些措辞和重复的单元。
例如,用“at 250℃ to 300℃”代替“at a temperature of 250℃ to 300℃”、用“the results show …”代替“from the experimental results, it can be concluded that”4、避免主观评价一般不要对论文做自我主观评价,尤其是不要自己标榜自己的研究结果。
避免使用“首次”、“第一”或“比较好”等自我评价的词语和“具有……的意义”、“奠定了……基础”、“具有……参考价值”、“对……大有帮助”、“首次实现了...”等句式。
避免出现“本文所谈的有关研究工作是对过去老工艺的一个极大的改进”、“经检索尚未发现与本文类似的文献”、“To our knowledge, there is as yet no paper in the open literature”等表达。
中英文详细摘要格式要求
中英文详细摘要格式要求
中英文详细摘要(500字左右,不超过IoOO字)采用统一封面。
论文题目下空一行居中打印“摘要”二字(黑体小二号加粗),“摘要” 二字下空一行打印摘要内容(宋体小四号)。
摘要内容后下空一行打印“关键词”三字(黑体小四号),其后为关键词(宋体小四号)。
关键词数量为3〜5个,每一关键词之间用分号分开,最后一个关键词后不打标点符号。
英文摘要应与中文摘要保持内容一致。
“ABSTRACT” ( Times New Roman字体小二号)9再下空一行打印英文摘要内容(TimeS New Roman 字体小四号)。
摘要内容后下空一行打印“KEYWORDS:”,用TimeSNeWROman字体小四号加粗,其后关键词小写(第一个字母大写),关键词数量为3〜5个,每一关键词之间用分号分开,最后一个关键词后不打标点符号,Times New Roman字体四号。
中文摘要的页眉打印,无论一级标题在奇数页还是偶数页都不显示页眉;其余页奇数页为“摘要”,偶数页为“沈阳理工大学硕士学位论文”;英文摘要的页眉打印,无论一级标题在奇数页还是偶数页都不显示页眉;其余页奇数页为“Abstract” ,偶数页为“沈阳理工大学硕士学位论文” o 中英文摘要单面打印,加页码,居中。
中英文摘要及关键词格式模板
附件3中文题目(居中)摘要:×××××(摘要内容用小四号宋体字书写,每行与冒号对齐;行距为固定值22磅)×××××关键词:×××××(关键词内容用小四号宋体字书写,每行与冒号对齐;行距为固定值22磅;关键词之间用分号相隔。
)×××××注:①格式模板中的说明(红色或蓝色字体表示),在参阅后请删除。
②中文摘要及关键词项目排版要求:中文摘要及关键词项目要求独占一页。
其中,中文大标题(课题题目)用二号黑体字居中书写,上空1.5行,下空1行;摘要两字用四号黑体字顶格书写,摘要内容用小四号宋体字书写,每行与冒号对齐,行距为固定值22磅;关键词三字用四号黑体字顶格书写,关键词内容用小四号宋体字书写,每行与冒号对齐;行距为固定值22磅。
英文题目(Times New Roman字体)Abstract:abcdefghijk(英文摘要内容用小四号Times New Roman字书写,每行与冒号对齐;行距为固定值22磅)×××××Keywords:abcdefghijk(英文关键词内容用小四号Times New Roman字书写,每行与冒号对齐;行距为固定值22磅;关键词之间用分号相隔)×××××注:①格式模板中的说明(红色或蓝色字体表示),在参阅后请删除。
②英文摘要及关键词项目排版要求:英文摘要及关键词项目要求独占一页。
其中,英文大标题(课题题目)用二号Times New Roman字居中书写,上空1.5行,下空1行;Abstract用四号Times New Roman字顶格书写,摘要内容用小四号Times New Roman字书写,每行与冒号对齐,行距为固定值22磅;Keywords用四号Times New Roman字顶格书写,关键词内容用小四号Times New Roman书写,每行与冒号对齐;行距为固定值22磅。
中英文摘要写作要求及格式
中、英文摘要写作要求及格式1.摘要写作要求摘要的内容要包括研究的目的、方法、结果和结论。
计量单位一律换算成国际标准计量单位。
除特殊情况外,数字一律用阿拉伯数字。
中、英文摘要的内容应严格一致。
2.中文摘要中文摘要前打印毕业论文(毕业设计)的标题。
主标题一般不超过20个汉字。
如有副标题,应另起一行(副标题前加破折号),副标题(包括破折号在内)同样不得超过20个汉字。
中文主标题格式:可选用本模板中的样式所定义的“论文中文主标题”,或手动设置(黑体,三号,居中,段前1行、段后0行,单倍行距)。
中文副标题格式:可选用本模板中的样式所定义的“论文中文副标题”,或手动设置(楷体_GB2312,四号,居中,段前0.5行,段后0行,单倍行距)。
中文标题下空一行为摘要。
“摘要:”格式:首行缩进2字符,黑体,小四。
“摘要:”后紧接摘要正文。
字数在200字左右。
中文摘要正文格式:可选用本模板中的样式所定义的“中文摘要正文”,或手动设置(楷体_GB2312,小四,行距为固定值20磅)。
中文摘要正文后空一行,另起一行列出3-5个关键词。
“关键词:”格式:首行缩进2字符,黑体,小四。
“关键词:”后紧接关键词。
关键词之间用分号间隔,最后一个关键词末尾不加标点。
中文关键词格式:楷体_GB2312,小四,行距为固定值20磅。
3.英文摘要中文关键词下空两行打印毕业论文(毕业设计)的英文标题。
英文主标题首字母大写,标题中其他单词实词首字母大写,其他均为小写。
英文主标题格式:可选用本模板中的样式所定义的“论文英文主标题”,或手动设置(Times New Roman,四号,加粗,居中,段前段后均为0行,单倍行距)。
英文副标题格式:可选用本模板中的样式所定义的“论文英文副标题”,或手动设置(Times New Roman,小四,加粗,居中,段前0.5行,段后0行,单倍行距)。
英文标题下空一行为英文摘要。
“Abstract:”格式:首行缩进2字符,Times New Roman,小四,加粗。
毕业论文标题、中英文摘要、关键词和目录的格式[技巧]
毕业设计(论文)新民本主义:传统民本思想与现代民主理念的契合(字体:黑体小一)专业年级学生学号学生姓名指导老师评阅人二○○年月中国·南京摘要(“摘要”两字的字体为黑体三号,居中。
)正文字体均为:宋体小四号,行距为1.5倍(不低于400字)关键词:民本;民主;新民本主义(“关键词”三字字体为黑体,内容(3-5)个,宋体小四号。
各关键词之间用;)注意:摘要和关键词只能单独一页.Abstract(“Abstract”一词用Times New Roman字体三号,加黑,居中。
)Thought of people as the center is the marrow of our traditional culture and the core of the theory of managing state affairs. It germinates in the early state of antiquity society and is based on patriarchal clan system. It is also a kind of value seeking for the realization of the ethic reason and moral justice. Its basic thinking is that the monarch is defined by people and conversely people are defined by the monarch. At first appearance, its purpose is to value people’s s uffering, fate and interest on the ruler’s position. However, its real intention is to fool the people so as to strengthen and consolidate the ruler’s rule. The theory of “people-oriented concept” includes nine topics such as “the theory of people is being the root of the monarch’s rule”, “the theory of people is being more valuable than the monarch”, “the theory of the monarch is being people’s servant”and so on. People –oriented means “value the people ”in essence, which sees “people”as its foundation of politics rule, ranking official, and administration.(正文字体为:Times New Roman字体,小四号,且行距为单倍或1.5倍。
中英文长摘要规范
长摘要规范1、文摘篇幅:中文长文摘字数要求在1000字以上。
英文长文摘内容与中文对应。
2、文摘结构:(1)目的——研究、研制、调查等的前提、目的和任务,所涉及的主题范围;(2)方法——所用的原理、理论、条件、对象、材料、工艺、结构、手段、装备、程序等;(3)结果——实验的、研究的结果,数据,被确定的关系,观察结果,得到的效果,性能等;(4)结论——结果的分析、研究、比较、评价、应用,提出的问题,今后的课题,假设,启发,建议,预测等;(5)其他——不属于研究、研制、调查的主要目的、方法和结论,但具有创新性和学术交流价值的重要内容。
3、文摘内容文摘要突出作者原创性工作,应排除本学科领域已成为常识的内容,不得简单重复题名中已有的信息,也不得与引言相混。
文摘要着重反映出文章的创新、独到之处,尽量删除背景信息或过去的研究,只叙述新信息和发现、最关键的数据等。
另一方面,不得将未来计划等原文献本身未含的信息或主张写入文摘之内。
文字简洁,取消不必要的字句(例如:In this paper、in detail、briefly、mainly、not only… but also等)尽量简化一些措辞和重复的单元。
例如,用“at 250℃ to 300℃”代替“at a temperature of 250℃ to 300℃”、用“the results show …”代替“from the experimental results, it can be concluded that”4、避免主观评价一般不要对论文做自我主观评价,尤其是不要自己标榜自己的研究结果。
避免使用“首次”、“第一”或“比较好”等自我评价的词语和“具有……的意义”、“奠定了……基础”、“具有……参考价值”、“对……大有帮助”、“首次实现了...”等句式。
避免出现“本文所谈的有关研究工作是对过去老工艺的一个极大的改进”、“经检索尚未发现与本文类似的文献”、“To our knowledge, there is as yet no paper in the open literature”等表达。
论文各部分的撰写要求_论文格式_
论文各部分的撰写要求(一)论文封面1.论文封面由华南师范大学研究生处专业学位培养科统一制作。
2.封面包括的内容有学校代号、论文分类号、密级、论文题名、研究生姓名、院系、专业方向、导师姓名、职称、申请时间。
3.论文题名应能概括整篇论文最重要的内容,简明、恰当,避免使用不常见的缩简词、首字母缩写字、字符、代号和公式等。
中文题名一般不宜超过25个汉字,题名语意未尽,可用副标题做补充或限定说明。
用英文撰写的论文题名应有中文题名排在下面。
(二)中英文摘要及关键词1.摘要是论文的内容不加注释和评论的简短陈述,应做到不阅读全文就能获得与论文同等量的必要信息,是一篇完整的短文,可以独立使用、引用。
摘要应说明论文研究的目的、使用方法、结果和结论等。
2.中文摘要一般为1000字左右。
外文摘要为中文摘要的翻译,所表述的内容与中文摘要一致。
外文摘要另起一页打印。
摘要中不用图、表、结构式公式及非公知公用的符号与术语。
3.关键词是为了文献标引工作而从论文中选取出来,用以表示全论文主题内容信息的单词或术语,一般为3—8个。
关键词字体加粗另起一行,排在摘要的左下方,按涉及的内容、从大到小排列。
多个关键词之间用分号隔开,最后一个关键词不加标点,应尽量用《汉语主题词表》等词表提供的规范词。
英文关键词、摘要内容应与本论文的中文关键词、摘要内容相对应。
(三)目录目录应是论文的提纲。
论文目录起始范围从正文章节、参考文献、附录、后记。
目录与中英文摘要作为论文的前置部分,应单独编排页码。
应按论文组成部分的顺序列出标题(具体列法见5页“目录页”)。
(四)绪论(或序言、引言、前言等)绪论属论文的主体部分,主要介绍论文研究背景、论文所要解决的问题或研究的内容,论文研究在教育工作中的实践价值和理论意义,本研究领域国内外研究状况(或文献综述),论文的基本思路和论文结构等。
(五)论文正文1.正文是学位论文的核心部分,一般由理论分析、研究设计(含研究方法、研究对象、理论假设、研究工具等)与实施、数据资料、研究结果的统计分析、论证、结论等部分构成。
目录+中英文摘要
Contents iChinese abstract...........................................................................ii English abstract (iii)1. Introduction .......................................错误!未定义书签。
2. Three sources of knowledge .........................错误!未定义书签。
2.1 Experience .......................................错误!未定义书签。
2.2 Reasoning ........................................错误!未定义书签。
2.3 Research .........................................错误!未定义书签。
3. Four types of study ................................错误!未定义书签。
3.1 Receptive study ..................................错误!未定义书签。
3.2 Productive study .................................错误!未定义书签。
3.3 Critical study ...................................错误!未定义书签。
3.4 Creative study ...................................错误!未定义书签。
4. Promoting dynamic interplay between study and research 错误!未定义书签。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
摘要
注射成型是塑料成型的主要方法之一。
用注射成型方法加工的塑料制品,不仅可以成型复杂结构的制品,而且制品黏度高、质量好,注射成型的生产率也高。
由于塑料的物理性能、化学性能与其它材料不同,因此注射塑料制品的设计与成型加工以及模具设计亦有它独特的一面。
要设计出结构合理、造型优美、经济耐用的塑料制品,不但要考虑塑料本身的特性,而且要考虑到塑料成型的工艺,模具结构,制品使用环境以及制品的经济效益。
一副模具从功能上可分为注射、成型、冷却、脱模等部分;从结构上可分为模架、成型、导向、脱模等部分。
本文介绍了模具设计的一般原则和注意事项、模具材料及其选择原则、塑料扣件注射模具设计的整个过程。
对具体方案进行了分析论证,并详细分析了各个部分的设计过程,其中包括模架的确立、注射机的选择、模具与注射机有关参数的校核、浇注系统的设计计算、成型零件的尺寸和公差计算、冷却系统的设计计算、脱模机构的设计计算等等。
最后绘制了模具装配图和零件图。
关键词:POM 注射机冷却水道浇注系统斜滑块模具设计
ABSTRACT
injection molding is one of the main methods of the plastics models. this method of injecting model of plastic, not only can model the complications structure, and product sticky degree is high, quality is good, and the rate of production which injects to model is also high. the physical function, chemistry function of plastics is different from other materials, so the design of injecting plastic, process and the molding design also has it special one side. if we want to design plastic of a reasonable structure, beautiful shape, and economic, we should consider the characteristic of plastics not only, but also the craft of plastic, molding structure, economic performance of product, and the using environment of product.
a mold can be divided into inject, model, cool off, take off mold's etc. from the function part. it can be divided into a mold and molding, leading to, and take off mold's etc. from the structure part. this text introduced general principle and regulation, materials of mold and its choice principle, the whole process of fastene r molding design. carried on analytical argument to the concrete project, and analyzed each design process of part in detail, including the choice of mold and injecting machine, checking parameters of injecting machine, design and calculation of watering system, the model, cooling system and taking off system etc. drew an assembling picture and pictures of parts of mold finally.
key words: POM ; Inject the machine ; drawing water ; Gating system ; angled-lift. Splits;Mould desig
天津大学机械工程学院。