DVIULC6-2P6中文资料
智能AVI FDX-M2P双DVI-D扩展器商品说明书
What’s in the Box?IntroductionThe FDX-M2P consists of a transmitter and receiver that extend two DVI-D outputs, with audio, USB 1.1 keyboard and mouse, and transparent RS-232. For exceptional quality and security, fiber optic extension is the best solution. The FDX-M2P can go the distance with multi-mode fiber optic cabling with a reach of up to 1,400 feet. The system includes a transmitter and receiver, which are connected by two fiber optic cables. The transmitter connects to the user’s computer with the necessary cables, while the receiver connects to the remote interface devices up to 1,400 feet away.Features• Dual channel DVI-D, audio, USB keyboard and mouse, and transparent RS-232• Top Signal Quality over Multimode Fiber (up to 1,400 feet)• Video Resolutions up to 1920 x 1200 WUXGA at 60Hz• Customizable/Programmable DDC Table for Mac/PC• Supports all USB 1.1 Keyboards and Mice• Fiber Plug Type LC• Compatible With all Major KVM Switches• Supports Mac, PC, and Linux DVI• Uses universal DVI Single Link connectors• Zero pixel loss with TMDS signal correction• Rack Mountable Solution• Plug-and-play3 FDX-M2P ReceiverFDX-M2P Transmitter 2 DVComputer Up to 1,400 feet (400 m) over 2 fiber optic cables Installation1. Power off the computer, displays and speakers.2. Connect the DVI Video, Audio and USB cables from the computer to the FDX-M2P transmitter.3. Connect the FDX-M2P transmitter to the FDX-M2P receiver using 2 fiber optic cables.4. Connect the DVI displays, speakers and USB keyboard and mouse to the FDX-M2P receiver.5. Power on the FDX-M2P transmitter and receiver.6. Power on the computer, displays and speakers.amVI-D DisplaysStereo SpeakersPUSB Keyboard USB MouseFiber Optic Cable Specifications• Multimode: Two fibers 50μm or 62.5μm. For example: I-V(ZN)H 2G50 (In house patchcable)or I-V(ZN)HH 2G62,5 (In house Breakout cable) or I/AD(ZN)H 4G50 (inhouse OR outdoor Breakout cable, stress resistant) or A/DQ(ZN)B2Y 4G62,5(outdoor cable, stress resistant with protection against animal biting) All notationsacc. VDE specification.• Singlemode: Two fibers 9μm. For example: I-V (ZN)H 2E9 (In house patch cable) or IV( ZN)HH 2E9 (In house Breakout cable) or I/AD(ZN)H 4E9 (in house OR outdoorBreakout cable, stress resistant) or A/DQ(ZN)B2Y 4G9 (outdoor cable, stressresistant with protection against animal biting) All notations acc. VDE specification.A point to point connection is required. Having one or more patch panels in theline is possible and allowed. Telecommunications or network equipment may not beconnected to the fiber optic connectors, doing so may cause damage to the device.5Applications• Home Theater Integration• Digital Signage Deployment• Information Kiosks/Displays• Film/Recording StudiosIn the medical or industrial field, where it may not be practical (or safe) to have one or more CPUs in the general vicinity, the FDX-M2P is the perfect solution, allowing for either PC or Mac signals to be extended up to 1,400 feet.Another practical use for the FDX-M2P would be for media recording studios, where soundproofing and space issues come into play. Using an extender eliminates the inherent “hum” of a powered CPU and gives you the freedom of using your keyboard, mouse and monitor without having to find room for the computer itself in the same workspace.Technical Specifications7© Copyright 2010 Smart-AVI, All Rights ReservedNOTICET h e i n f o r m a t i o n c o n t a i n e d i n t h i s d o c u m e n t is subject to change without notice. Smart-AVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for any particular purpose.Smart-AVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.No part of this document may be photocopied, reproduced or translated into another language without prior written consent from Smart-AVI.For more information, visit .SmartAVI, Inc. / Twitter: smartavi2840 N. Naomi Ave. Burbank, CA 91504Tel: (818) 565-0011 Fax: (818) 565-0020。
DVI高清画面分割器的特点,作用,使用方法
DVI06 Images Processor 使用手册1概述多窗口图形处理器是专业化的图形处理与控制设备，它能够在高分辨率的VGA/DVI 显示设备上以全屏或多窗口模式显示四路图像(MP04)或六路图像（MP06）（VGAI或CVBS 或可选的DVI）信息。
多窗口图形处理器采用嵌入式结构设计，内嵌专用操作系统，整个系统封闭式运行，稳定性大大高于基于WINDOWS操作系统的“计算机＋板卡”方式的传统控制器。
多窗口图形处理器器可接受VGA（DVI）和CVBS 等格式的视频信号，并按用户要求对视频信号进行视窗大小、显示位置、图像比例等方面的调整和变换，最终输出统一格式的VGA或DVI信号。
多窗口图形处理器可通过RS232或红外的方式进行远程和近程控制。
图1 在一个单显示器上同时显示四个输入信号2 输入与输出多窗口图形处理器的每个通道都能够接受四种输入数据：NTSC或PAL制式的CVBS，VGA，DVI（可选）。
任何一个通道都有三种输入接口（VGA和HDMI共用一个DVI－I接口），但任一时刻只能有一种参与显示。
输入的CVBS信号可以来自电视摄像机、录相机、DVD机或者电视电话会议系统。
输入的模拟VGA和HDMI信号通常由计算机提供，最高可支持分辨率1920x1080、场频60Hz 的VGA视频。
输入的视频信号都被调整成一定分辨率和刷新频率的VGA/HDMI信号，然后再输出。
支持的最高分辨率为1920X1080，此分辨率下的最高刷新频率为60Hz。
输出端连接具有DVI或HDMI接口的显示设备。
3操作●多窗口图形处理器RS-232接口，能够连接到计算机通过软件控制。
●前面板操作：数字键１，２，３，４，5，6切换单画面显示，＂MODE＂切换画面显示模式，在单画面显示状态下，“SOURCE/MENU＂键切换输入的信号源，在CVBS，VGA，DVI三者之间选择。
长按“SOURCE/MENU”进入系统菜单设置（按“1”或“2”选择菜单项目，按“3”或“4”确认菜单项选择。
Philips B Line 27 USB-C显示器 2560 x 1440 (QHD)说明书
PhilipsLCD monitor with USB-CB Line27" (68.5 cm)2560 x 1440 (QHD)276B9Simplify your connectionswith USB-CView Quad HD image and re-charge your laptop, all at the same time with a single USB-C cable. SmartErgo base, Flicker-free and LowBlue mode make work easy-on-the eyes.Single cable USB-C connection•Connect your notebook with one USB-C cable•Power and re-charge compatible notebook from the monitor•USB 3.2 high speed data transferExcellent performance•Crystalclear images with Quad HD 2560 x 1440 pixels•IPS technology for full colors and wide viewing anglesDesigned for the way you work•SmartErgoBase enables people-friendly ergonomic adjustments•Less eye fatigue with Flicker-free technology•LowBlue Mode for easy on-the-eyes productivity•HDMI ensures universal digital connectivityDesigned for sustainability•Designed to meet environmental standards•PowerSensor saves up to 80% energy costsHighlightsUSB-C connectionThis Philips display features a USB type-C connector with power delivery. Withintelligent and flexible power management, you can power charge your compatible device directly. Its slim, reversible USB-C allows for easy, one-cable connection. You can watch high resolution video and transfer data at a super-speed, while powering up and re-charging your compatible device at the same time.Power & re-charge notebookThis monitor features a built in USB-Cconnector which meets USB Power Delivery standard. With intelligent and flexible power management, you can now power up and or re-charge your compatible* Notebook directly from the Monitor using a single USB-C cable.Crystalclear imagesThese Philips screens deliver Crystalclear, Quad HD 2560x1440 or 2560x1080 pixel images. Utilizing high performance panels with high density pixel count, enabled by high bandwidth sources like USB-C, Displayport, HDMI, these new displays will make your images and graphics come alive. Whether you are demanding professional requiringextremely detailed information for CAD-CAM solutions, using 3D graphic applications or a financial wizard working on huge spreadsheets,Philips displays will give you Crystalclear images.IPS technologyIPS displays use an advanced technology which gives you extra wide viewing angles of 178/178 degree, making it possible to view the display from almost any angle - even in 90 degree Pivot mode! Unlike standard TN panels, IPS displays gives you remarkably crisp images with vivid colors, making it ideal not only for Photos, movies and web browsing, but also forprofessional applications which demand color accuracy and consistent brightness at all times.SmartErgoBaseThe SmartErgoBase is a monitor base that delivers ergonomic display comfort and provides cable management. The base can swivel, tilt and rotate to various angles to ensure maximum comfort. The height adjustable stand guarantees the optimalviewing level, reducing the physical strains of a long workday, while cable managementreduces cable clutter and keeps the workspace neat and professional.Flicker-free technologyDue to the way brightness is controlled on LED-backlit screens, some users experience flicker on their screen which causes eyefatigue. Philips Flicker-free Technology applies a new solution to regulate brightness and reduce flicker for more comfortable viewing.LowBlue ModeStudies have shown that just as ultra-violet rays can cause eye damage, shortwave length blue light rays from LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light.PowerSensorPowerSensor is a built-in 'people sensor' that transmits and receives harmless infrared signals to determine if user is present and automatically reduces monitor brightness when user steps away from the desk, cutting energy costs by up to 80 percent andprolonging monitor lifeIssue date 2023-09-15 Version: 3.1.312 NC: 8670 001 69539 EAN: 87 12581 76994 9© 2023 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.SpecificationsPicture/Display•LCD panel type: IPS technology•Backlight type: W-LED system•Panel Size: 27 inch / 68.5 cm•Display Screen Coating: Anti-Glare, 3H, Haze 25%•Effective viewing area: 596.74 x 335.66 mm •Aspect ratio: 16:9•Maximum resolution: 2560 x 1440 @ 75 Hz*•Pixel Density: 108.79 PPI•Response time (typical): 4 ms (Gray to Gray)*•Brightness: 350 cd/m²•Contrast ratio (typical): 1000:1•SmartContrast: 50,000,000:1•Pixel pitch: 0.2331 x 0.2331 mm•Viewing angle: 178º (H) / 178º (V), @ C/R > 10•Picture enhancement: SmartImage•Display colors: 16.7M•Color gamut (typical): NTSC 90%*, sRGB 114%*•Scanning Frequency: 30 - 114 kHz (H) / 48 - 75 Hz (V)•sRGB•Flicker-free•LowBlue Mode•EasyReadConnectivity•Signal Input: DisplayPort 1.2 x 1, HDMI 1.4 x 1, USB-C 3.2 Gen 1 x 1 (upstream, power delivery up to 65W)•USB:: USB-C x 1 (upstream), USB 3.2 x 4 (downstream with 1 fast charge B.C 1.2)•HDCP: HDCP 1.4 (DP/HDMI/USB-C)•Audio (In/Out): Audio out•Sync Input: Separate SyncUSB•USB-C: Reversible plug connector•Super speed: Data and Video transfer•DP: Built-in DisplayPort Alt mode•Power delivery: USB PD version 3.0•USB-C max. power delivery: Up to 65W (5V/3A; 9V/3A; 10V/3A; 12V/3A; 15V/3A; 20V/3.25A) Convenience•Built-in Speakers: 2 W x 2•User convenience: SmartImage, Input, PowerSensor, Menu, Power On/Off•Control software: SmartControl•OSD Languages: Brazil Portuguese, Czech, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, Turkish, Ukrainian •Other convenience: Kensington lock, VESA mount (100x100mm)•Plug & Play Compatibility: DDC/CI, Mac OS X, sRGB, Windows 10 / 8.1 / 8 / 7Stand•Height adjustment: 150 mm •Pivot: -/+ 90 degree•Swivel:-/+175 degree•Tilt: -5/30 degreePower•Energy Label Class: F•ECO mode: 19.7 W (typ.)•On mode: 18.6 W (typ.) (EnergyStar test method)•Standby mode: 0.3 W•Off mode: Zero watts with Zero switch•Power LED indicator: Operation - White, Standbymode- White (blinking)•Power supply: Built-in, 100-240VAC, 50-60HzDimensions•Product with stand(max height): 614 x 558 x263 mm•Product without stand (mm): 614 x 372 x 61 mm•Packaging in mm (WxHxD): 690 x 462 x 250 mmWeight•Product with stand (kg): 8.15 kg•Product without stand (kg): 5.40 kg•Product with packaging (kg): 10.84 kgOperating conditions•Temperature range (operation): 0°C to 40°C °C•Temperature range (storage): -20°C to 60°C °C•Relative humidity: 20%-80 %•Altitude: Operation: +12,000ft (3,658m), Non-operation: +40,000ft (12,192m)•MTBF (demonstrated): 70,000 hrs (excludedbacklight)Sustainability•Environmental and energy: PowerSensor,EnergyStar 8.0, EPEAT*, TCO Certified Edge,RoHS•Recyclable packaging material: 100 %•Post consumer recycled plastic: 85%•Specific Substances: PVC / BFR free housing,Mercury freeCompliance and standards•Regulatory Approvals: EPA, CB, TUV/GS, TUVErgo, SEMKO, CU-EAC, EAEU RoHS, MEPS, RCM,PSB, PSE, VCCI, CCC, CECP, CEL, FCC Class B,ICES-003, CE Mark, UKRAINIANCabinet•Front bezel: Black•Rear cover: Black•Foot:Black•Finish: TextureWhat's in the box?•Monitor with stand•Cables: HDMI cable, DP cable, USB-C to C/Acable, Power cable•User Documentation*"IPS" word mark / trademark and related patents on technologiesbelong to their respective owners.*The maximum resolution works for either USB-C, DP or HDMIinput.*Response time value equal to SmartResponse*NTSC Area based on CIE1976*sRGB Area based on CIE1931*Activities such as screen sharing, on-line streaming video and audioover the Internet can impact your network performance. Yourhardware, network bandwidth and its performance will determineoverall audio and video quality.*For USB-C power and charging function, your Notebook/devicemust support USB-C standard Power Delivery specifications. Pleasecheck with your Notebook user manual or manufacturer for moredetails.*For Video transmission via USB-C, your Notebook/device mustsupport USB-C DP Alt mode*EPEAT rating is valid only where Philips registers the product. Pleasevisit https:/// for registration status in your country.*The monitor may look different from feature images.。
ASUS ASUS VG236 系列 液晶显示器 说明书
ASUS VG236 系列 液晶显示器用户指南2010 年 4 月目录声明 (iii)安全信息 (iv)保养和清洁 (v)1.1 欢迎使用！ ................................................................1-11.2 物品清单...................................................................1-11.3 调整显示器 ................................................................1-21.4 连接线缆...................................................................1-31.5 显示器简介 ................................................................1-42.1 卸下支撑臂/底座（VESA 壁挂安装时）...............................2-12.2 组装显示器底座...........................................................2-23.1 OSD（屏幕显示）菜单.................................................3-13.2 规格摘要...................................................................3-43.3 故障排除（常见问题）...................................................3-53.4 支持的时序列表...........................................................3-6版权所有 © 2010 ASUSTeK COMPUTER INC.保留所有权利。
Infineon TLE4966-2K高精度双输出电磁感应切换器数据手册（版本1.0）说明书
TLE4966-2KHigh Precision Hall Switch with two OutputsDatasheetRev.1.0, 2010-06-28Edition 2010-06-28Published byInfineon Technologies AG81726 Munich, Germany© 2010Infineon Technologies AGAll Rights Reserved.Legal DisclaimerThe information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party.InformationFor further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office ().WarningsDue to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office.Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.TLE4966-2KRevision History: 2010-06-28, Rev.1.0Previous Revision:Page Subjects (major changes since last revision)Trademarks of Infineon Technologies AGABM™, BlueMoon™, CONVERGATE™, COSIC™, C166™, FALC™, GEMINAX™, GOLDMOS™, ISAC™, OMNITUNE™, OMNIVIA™, PROSOC™, SEROCCO™, SICOFI™, SIEGET™, SMARTi™, SMINT™, SOCRATES™, VINAX™, VINETIC™, VOIPRO™, X-GOLD™, XMM™, X-PMU™, XWAY™Other TrademarksMicrosoft®, Visio®, Windows®, Windows Vista®, Visual Studio®, Win32® of Microsoft Corporation. Linux® of Linus Torvalds. FrameMaker®, Adobe® Reader™, Adobe Audition® of Adobe Systems Incorporated. APOXI®, COMNEON™ of Comneon GmbH & Co. OHG. PrimeCell®, RealView®, ARM®, ARM® Developer Suite™ (ADS), Multi-ICE™, ARM1176JZ-S™, CoreSight™, Embedded Trace Macrocell™ (ETM), Thumb®, ETM9™, AMBA™, ARM7™, ARM9™, ARM7TDMI-S™, ARM926EJ-S™ of ARM Limited. OakDSPCore®, TeakLite® DSP Core, OCEM® of ParthusCeva Inc. IndoorGPS™, GL-20000™, GL-LN-22™ of Global Locate. mipi™ of MIPI Alliance. CAT-iq™ of DECT Forum. MIPS™, MIPS II™, 24KEc™, MIPS32®, 24KEc™ of MIPS Technologies, Inc. Texas Instruments®, PowerPAD™, C62x™, C55x™, VLYNQ™, Telogy Software™, TMS320C62x™, Code Composer Studio™, SSI™ of Texas Instruments Incorporated. Bluetooth® of Bluetooth SIG, Inc. IrDA® of the Infrared Data Association. Java™, SunOS™, Solaris™ of Sun Microsystems, Inc. Philips®, I2C-Bus® of Koninklijke Philips Electronics N.V. Epson® of Seiko Epson Corporation. Seiko® of Kabushiki Kaisha Hattori Seiko Corporation. Panasonic® of Matsushita Electric Industrial Co., Ltd. Murata® of Murata Manufacturing Company. Taiyo Yuden™of Taiyo Yuden Co., Ltd. TDK® of TDK Electronics Company, Ltd. Motorola® of Motorola, Inc. National Semiconductor®, MICROWIRE™ of National Semiconductor Corporation. IEEE® of The Institute of Electrical and Electronics Engineers, Inc. Samsung®, OneNAND®, UtRAM® of Samsung Corporation. Toshiba® of Toshiba Corporation. Dallas Semiconductor®, 1-Wire® of Dallas Semiconductor Corp. ISO® of the International Organization for Standardization. IEC™ of the International Engineering Consortium. EMV™ of EMVCo, LLC. Zetex® of Zetex Semiconductors. Microtec® of Microtec Research, Inc. Verilog® of Cadence Design Systems, Inc. ANSI® of the American National Standards Institute, Inc. WindRiver® and VxWorks® of Wind River Systems, Inc. Nucleus™ of Mentor Graphics Corporation. OmniVision® of OmniVision Technologies, Inc. Sharp® of Sharp Corporation. Symbian OS® of Symbian Software Ltd. Openwave® of Openwave Systems, Inc. Maxim® of Maxim Integrated Products, Inc. Spansion® of Spansion LLC. Micron®, CellularRAM® of Micron Technology, Inc. RFMD® of RF Micro Devices, Inc. EPCOS® of EPCOS AG. UNIX® of The Open Group. Tektronix® of Tektronix, Inc. Intel® of Intel Corporation. Qimonda® of Qimonda AG. 1GOneNAND® of Samsung Corporation. HyperTerminal® of Hilgraeve, Inc. MATLAB® of The MathWorks, Inc. Red Hat® of Red Hat, Inc. Palladium® of Cadence Design Systems, Inc. SIRIUS Satellite Radio® of SIRIUS Satellite Radio Inc. TOKO® of TOKO Inc.The information in this document is subject to change without notice.Last Trademarks Update 2008-11-17Trademarks of Infineon Technologies AG . . . . . . . . . . . . . . . . . . . . . . 31Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.2Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.3Pin Configuration (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.1Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.2Circuit Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.3Application Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Operating Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95Electrical and Magnetic Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Field Direction Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6Timing Diagrams for the Speed Outputs . . . . . . . . . . . . . . . . . . . . . . . . 11 7Package Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 7.1Package Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 7.2Distance between Chip and Package Surface . . . . . . . . . . . . . . . . . . . . . . 12 7.3Package Outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12PCB Footprint for PG-TSOP6-6-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Product Name Product Type Ordering Code Package TLE4966-2K Double Hall SwitchSP000788888PG-TSOP6-6-5High Precision Hall Switch with two OutputsTLE4966-2K1Overview1.1Features• 2.7V to 24V supply voltage operation•Operation from unregulated power supply •High sensitivity and high stability of the magnetic switching points•High resistance to mechanical stress by Active Error Compensation •Reverse battery protection (-18V)•Superior temperature stability •Peak temperatures up to 195°C •Low jitter (typ. 1μs)•Digital output signals•Excellent matching of the 2 Hall probes •Hall plate distance 1.45mm•Two independent speed outputs •SMD package PG-TSOP6-6-51.2Functional DescriptionThe TLE4966-2K is an integrated circuit dual Hall-effect sensor designed specifically for highly accurate applications. Precise magnetic switching points and high temperature stability are achieved by active compensation circuits and chopper techniques on chip. The sensor provides two independent speed outputs at Q1 and Q2 with the status (high or low) corresponding to the magnetic field value at the respective Hall element H1 and H2. Both Hall elements have the identical thresholds for B OP and B RP (B OP1 = B OP2 and B RP1 = B RP2). For positive magnetic fields (south pole) exceeding the threshold B OP1 and/or B OP2 the corresponding output Q1 and/or Q2 is low, whereas for negative magnetic fields (north pole) lower than B RP the output switches to high. Due to the spatial distance of the two Hall elements on the chip (d = 1.45mm) the two output signals will show a phase difference in case the sensor is used with a rotating magnetized pole wheel.Overview 1.3Pin Configuration (top view)Table 1Pin Definitions and FunctionsPin No.Symbol Function1Q2Speed 22GND Recommended connection to GND3Q1Speed 14V DD Supply voltage5GND Recommended connection to GND6GND GroundGeneral 2General2.1Block Diagram2.2Circuit DescriptionThe chopped Dual Hall Switch comprises two Hall probes, bias generator, compensation circuits, oscillator, and output transistors.The bias generator provides currents for the Hall probes and the active circuits. Compensation circuits stabilize the temperature behavior and reduce influence of technology variations.The Active Error Compensation rejects offsets in signal stages and the influence of mechanical stress to the Hall probes caused by molding and soldering processes and other thermal stresses in the package. This chopper technique together with the threshold generator and the comparator ensures high accurate magnetic switching thresholds.Maximum Ratings2.3Application CircuitIt is recommended to use a series resistor R S with 200Ω and a capacitor of C S = 4.7nF for protection againstFigure 3Application Circuit3Maximum RatingsNote:Stresses above those listed here may cause permanent damage to the device. Exposure to absolutemaximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit.Table 2Absolute Maximum Ratings T j = -40°C to 150°CParameterSymbolLimit Values UnitConditionsmin.max.Supply voltageV DD V s V s -18 -18 -1818 24 26Vfor 1 h, R S ≥ 200 Ω for 5 min, R S ≥ 200 ΩSupply current through protection device I DD-5050mAOutput voltage V Q -0.7 -0.718 26V************Ω pull upContinuous output current I Q -5050mA Junction temperatureT j– – – –155 165 175 195°Cfor 2000 h (not additive) for 1000 h (not additive) for 168 h (not additive) for 3 x 1 h (additive)Storage temperature T S -40150°C Magnetic flux densityB–unlimitedmTTable 3ESD Protection 1)1)Human Body Model (HBM) tests according to: EOS/ESD Association Standard S5.1-1993 and Mil. Std. 883D method3015.7Parameter SymbolLimit Values UnitNotesmin.max.ESD voltageV ESD–±4kVHBM , R = 1.5 k Ω, C = 100 pF T A = 25°COperating Range4Operating RangeThe following operating conditions must not be exceeded in order to ensure correct operation of the TLE4966-2K. All parameters specified in the following sections refer to theses operating conditions unless otherwise mentioned.Table 4Operating RangeParameter SymbolLimit Values UnitConditionsmin.typ.max.Supply voltageV DD V S V S 2.7 – –– – –18 24 26V1 h with R S ≥ 200 Ω for 5 min R S ≥ 200 ΩOutput voltage V Q -0.7–18V Junction temperature T j -40 –– –150 175°Cfor 168 hOutput currentI Q–10mAElectrical and Magnetic Parameters5Electrical and Magnetic ParametersProduct characteristics involve the spread of values guaranteed within the specified voltage and temperature range. Typical characteristics are the median of the production.Table 5Electrical Characteristics 1)1)over operating range, unless otherwise specified. Typical values correspond to V DD = 12 V and T A = 25°CParameter SymbolLimit Values UnitConditionsmin.typ.max.Supply currentI DD4 5.27mA V DD = 2.7 V ... 18 V Reverse current I SR 00.21mA V DD = -18 V Output saturation voltage V QSAT –0.30.6V I Q = 10 mA Output leakage current I QLEAK –0.0510μA for V Q = 18 VOutput fall time t f –0.21μs R L = 1.2 k Ω; C L < 50 pFsee: Figure 4 on Page 11Output rise time t r –0.21μs Chopper frequency f OSC –320–kHz Switching frequency f SW 0–15 2)2)To operate the sensor at the max. switching frequency, the magnetic signal amplitude must be 1.4 times higher than forstatic fields. This is due to the -3 dB corner frequency of the low pass filter in the signal path.kHz Delay time 3)3)Systematic delay between magnetic threshold reached and output switching t d –13–μs Count Signal Delay t dc 502001000nsOutput jitter 4)4)Jitter is the unpredictable deviation of the output switching delay t QJ –1–μs RMS Typ. value for square wave signal 1 kHz Repeatability of magnetic thresholds5)5)B REP is equivalent to the noise constantB REP–40–μT RMS Typ. value for ΔB /Δt > 12 mT/ms Power-on time 6)6)Time from applying V DD ≥ 2.7 V to the sensor until the output state is valid t PON –13–μs V DD ≥ 2.7 VDistance of hall plates d HALL – 1.45–mm Thermal resistance 7)7)Thermal resistance from junction to ambientCalculation of the ambient temperature (PG-TSOP6-6-5 example)e.g. for V DD = 12.0 V, I DDtyp = 5.5 mA, V QSATtyp = 0.3 V and 2 x I Q = 10 mA : Power Dissipation: P DIS = 72.0 mW.In T A = T j – (R thJA × P DIS ) = 175°C – (100 K / W × 0.072 W) Resulting max. ambient temperature: T A = 167.8°CR thJA–100–K/WPG-TSOP6-6-5Timing Diagrams for the Speed OutputsNote:Typical characteristics specify mean values expected over the production spread.Field Direction DefinitionPositive magnetic fields related with south pole of the magnet to the branded side of package.6Timing Diagrams for the Speed OutputsTable 6Magnetic Characteristics 1).1)over operating range, unless otherwise specified. Typical values correspond to V DD = 12 VParameterSymbolT j[°C]Limit Values Unit Conditionsmin.typ.max.Operate pointB OP1, B OP2-40 25 150 5.2 5.0 4.77.7 7.5 7.110.3 10.0 9.5mTB OP1 for Hall element 1 B OP2 for Hall element 2Release pointB RP1, B RP2-40 25 150-10.3 -10.0 -9.5-7.7 -7.5 -7.1-5.2 -5.0 -4.7mTB RP1 for Hall element 1 B RP2 for Hall element 2HysteresisB HYS1, B HYS2-40 25 150– 10.0 –– 15.0 –– 20.0 –mTB HYS1 = B OP1 - B RP1 B HYS2 = B OP2 - B RP2Magnetic matchingB MATCH-40 25 150– -2.0 –– 0 –– 2.0 –mTValid forB OP1 - B OP2 and B RP1 - B RP2Magnetic offsetB OFF1, B OFF2-40 25 150– -2.0 –– 0 –– 2.0 –mTB OFF1 = (B OP1 + B RP1)/2 B OFF2 = (B OP2 + B RP2)/2Temperaturecompensation of magnetic thresholdsTC ––-350–ppm/°C7Package Information7.1Package MarkingFigure 5Marking PG-TSOP6-6-57.2Distance between Chip and Package SurfaceFigure 6Distance Chip to Upper Side of IC7.3Package OutlinesPCB Footprint for PG-TSOP6-6-5Figure 8Footprint PG-TSOP6-6-5You can find all of our packages, sorts of packing and others in ourInfineon Internet Page “Products”: /products.Dimensions in mmw w w.i n f i n e o n.c o mMouser ElectronicsAuthorized DistributorClick to View Pricing, Inventory, Delivery & Lifecycle Information:I nfineon:TLE4966-2K。
MAC6中文说明书
3-3 订货信息
项目 型号 输入
代码 MAC6A-
调节输出 1
电源
规格 ９６×９６mm 5 位数字显示高精度字控制器 Ｍ 自由输入、ＴＣ、ＲＴＤ、ｍＶ、Ｖ、ｍＡ
Ｃ 继电器接点 １ａ ２４０Ｖ ＡＣ ２Ａ（ 阻性负载 ） Ｓ 固态继电器（SSR）驱动 １２Ｖ ＤＣ 最大２０ｍＡ Ｉ 电流 ４－２０ｍＡ ＤＣ 负载电阻最大５００Ω Ｖ 电压 ０－１０Ｖ ＤＣ 负载电流最大２ｍＡ Ｙ 控制电机 （伺服控制输出）接点容量１Ｃ ２４０Ｖ ＡＣ ２Ａ Ｘ 控制电机 （伺服控制输出）ＳＳＲ ２４０Ｖ ＡＣ ２Ａ
3
生电磁干扰。请在采取有效措施后使用。 ● 仪器具有用于散热的通风口，并且确保金属不会进入通风口中，否则会引起故障或者火灾。 ● 不要阻塞通风口或者使尘埃和其他类似物附着在上面，温度升高或者绝缘失效都会缩短产品寿命并
引起火灾。 ● 应该注意在重复性极限值（如电压、噪声、浪涌）实验时可能会损坏设备。 ● 禁止使用者改型和不正当使用。 3 简介 3-1 使用前的检查
在使用 MAC6 前请检查型号代码、外观和附件。确认没有错误、损坏和丢失。 确认型号代码，检查与订货的产品一致。根据下述代码表检查机壳上的型号代码。 检查附件 ｢注｣ 如果您有任何问题请联系我们的代理商或者营业本部。我们欢迎任何询问，例如，产品缺
陷、附件丢失等。
「 注意 」
3-2 使用注意事项 ●不要用硬的、尖的物体操作前面板。不要用指甲尖触碰按键。 ●当清洁仪器时，用干布轻擦。不要使用溶剂，如，稀释剂。
7. 功能的补充说明・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・60
7-1 自动返回功能・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・60 7-2 输出软启动功能・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・60 7-3 事件报警方式・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・60 7-4 AT（自整定）・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・60
Philips 242P6V 用户手册说明书
242P6V/welcomeZH 用户手册1客户服务与保修24故障排除和常见问题解答31目录1. 重要 (1)1.1 安全措施与维修 (1)1.2 标志说明 (2)1.3 产品和包装材料的废弃 (3)2. 设置显示器 (4)2.1 安装 (4)2.2 操作显示器 (6)2.3 MultiView (10)2.4 卸下底座装置 (12)2.5 MHL（Mobile High-De nitionLink，移动高清链接）简介 (12)3. 图像优化 (14)3.1 SmartImage (14)3.2 SmartC ontrast (15)4. PowerSensor™ (16)5. LightSensor (17)6. 内置摄像头和麦克风 (18)6.1 PC系统要求 (18)6.2 使用此设备 (18)7. 技术规格 (19)7.1 分辨率和预设模式 (22)8. 电源管理 (23)9. 客户服务与保修 (24)9.1 Philips平板显示器像素缺陷规定 (24)9.2 客户服务与保修 (26)10. 故障排除和常见问题解答 (31)10.1 故障检修 (31)10.2 一般常见问题解答 (32)10.3 M ultiView常见问题解答 (34)10.4 M HL 常见问题解答 (35)1. 重要此电子版用户指南适合使用Philips显示器的所有用户。
请在使用您的显示器之前花点时间阅读本用户手册。
它包含与使用显示器相关的重要信息和注意事项。
产品享受Philips保修须符合下列条件：产品适当用于其设计目的、符合操作说明、返修时提供原始帐单或付款收据，帐单或收据应载明购货日期、销售商名称、产品型号及生产号。
1.1 安全措施与维修警告使用本文档中未介绍的控制、调整或过程可能导致碰撞、电气危险和/或机械危险。
连接和使用电脑显示器时，请阅读并遵循以下说明。
操作• 请使显示器远离阳光直接照射、明亮强光线、以及任何其他热源。
ingenic Nytro XP6302 6209 6210 产品参数详细说明书
1. One gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes when referring to product capacity.
© 2015 Seagate Technology LLC. All rights reserved. Printed in USA. Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Nytro and WarpDrive are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners. When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual data rates may vary depending on operating environment and other factors. Seagate reserves the right to change, without notice, product offerings or specifications. SC562.2-1503US, March 2015
华硕主板
数字家庭主板M2NDH-支持AMD®SocketAM2Athlon64FX/Athlo64X2/Athlon64/Sempron -AMDLive!™Ready-强大扩充能力：1xPCI-Ex16、2xPCI-E、3xPCI-华硕WiFi-APSolo-华硕DHRemote™-华硕MP3-In™-华硕Q-Connector-高保真音频中央处理器支持AMD®SocketAM2Athlon64FX/Athlo64X2/Athlon64/Sempron 支持AMDCool'n'Quiet™技术AMD64架构，同时兼容32位和64位计算AMDLive!™Ready芯片组NVIDIAnForce®430MCP前端总线2000/1600MT/s内存双通道内存架构4x240-pinDIMM内存插槽，支持最大容量高达8GB的DDR2800/667/533ECC和non-ECC、un-buffered内存扩充插槽1xPCI-Expressx16插槽2xPCI-Expressx1插槽3xPCI2.2插槽存储装置/RAID-1xUltraDMA133/100/66/33-4xSerialATA3.0Gb/s-NVIDIAMediaShield™RAID通过SerialA TA设备支持RAID0、1、0+1、5和JBOD网络功能NVIDIAnForce®430内建GigabitMAC，支持externalAttansicPHY无线局域网：54MbpsIEEE802.11b/g（华硕WiFi-APSolo）音频功能ADI6声道高保真音频CODEC背板S/PDIF数字音频输出USB高达8个USB2.0/1.1接口M2N-VMDH-AMDSocketAM2-NVIDIAGeForce6100/nForce430-双通道DDR2800/667/533-1xPCIExpressx16+1xPCIExpressx1+2xPCI-双VGA：DVI-D和D-Sub-8声道高保真音频-2x1394a接口中央处理器支持AMD®SocketAM2Athlon64X2/Athlon64FX/Athlon64/Sempro nAMDCool'n'Quiet™技术AMD64架构，兼容32位和64位计算AMDLive!™Ready芯片组NVIDIAGeForce6100/nForce430前端总线2000/1600MT/s 内存双通道内存架构4x240-pinDIMM插槽，支持最大容量为8GB的DDR2800/667/533non-ECC，un-buffered内存显卡集成GeForce6100GPU高清晰视频处理，最高分辨率可达1920x1440（@75Hz）支持RGB显示；UXGA1600x1200（@60Hz）支持DVI-D显示支持双VGA输出：DVI-D和RGB注意：DVI-D不能用来输出RGB信号至CRT。
克罗韦尔 PanelView Plus 6 Compact 终端 说明书
新信息和更新信息
本手册中包含新增信息和更新信息。
变更摘要
下表包含了本版本所做的变更。
主题 更新了表 7 中的交流电压和频率。 更新了 2711PCT10C4D8 终端。从最新系列 B 终端中移除了 迷你 USB 端口 (B 型 )。 在整本用户手册中，移除了系列 B 2711PCT10C4D8 终端的 数据和图纸中的迷你 USB 端口 (B 型 )。
Allen-Bradley、 Rockwell Software、 Rockwell Automation、 PanelView、 FactoryTalk、 RSLinx、 CompactLogix、 ControlLogix、 SLC、 MicroLogix、 PLC-5 和 RSView 是罗克韦尔自动化有限公司的商标。 不属于罗克韦尔自动化的商标是其各自所属公司的财产。
用户手册
PanelView Plus 6 Compact 终端
产品目录号 2711PC-K4M20D8、 2711PC-B4C20D8、 2711PC-B4C20D8-LR、 2711PC-T6M20D8、 2711PC-T6C20D8、 2711PC-T10C4D8
重要用户须知
在安装、配置、操作或维护设备之前，请仔细阅读本文档及 “ 其他资源 ” 部分列出的文档，了解设备的安 装、配置和操作信息。除了所有适用的条例、法律和标准的要求之外，用户还必须熟悉安装和接线说明。
注意：标识可能会导致人员伤亡、财产损坏或经济损失的操作或情况的信息。注意符号 可帮助您确定危险情况，避免发生危险，并了解可能的后果。
重要信息 标识对成功应用和了解产品有重要作用的信息。
标签可能位于设备上或设备内，用于提供特定警示。
电击危险：位于设备 ( 例如，驱动器或电机 ) 表面或内部的标签，提醒人们可能存在危险 电压。
G6K-2P中文资料
1.Relay functionNone:Single-side stable modelU:Single-winding latching model 2.Contact form2:DPDTF:Outside-L surface mounting terminalG:Inside-L surface mounting terminalP:PCB terminal4.Approved standardsNone:UL, CSADoes not conform to Telcordia specifications Y:UL, CSAConforms to Telcordia specifications: 2,500 V for 2 x10 µs5.Rated Coil Voltage3, 4.5, 5, 12, 24 VDCRC9192Application ExamplesT elephones, communications equipment, measurement devices, office automation machines, and audio–visual products.SpecificationsContact mechanism:Bifurcated crossbar Ag (Au-alloy contact)Enclosure ratings:Fully sealed ■Coil RatingsSingle-side Stable ModelsG6K-2F, G6K-2G, G6K-2P Note:1.The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.2.The operating characteristics are measured at a coil temperature of 23°C.3.The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously.Single-side Stable Models (Bellcore Version)G6K-2F-Y, G6K-2G-Y, G6K-2P-Y Note:1.The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.2.The operating characteristics are measured at a coil temperature of 23°C.3.The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously.Single-winding Latching Models (Bellcore Version)G6KU-2F-Y, G6KU-2G-Y, G6KU-2P-Y Note:1.The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.2.The operating characteristics are measured at a coil temperature of 23°C.3.The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously.Rated voltage 3 VDC 4.5 VDC 5 VDC 12 VDC Rated current 33.0 mA 23.2 mA 21.1 mA 9.1 mA Coil resistance 91 Ω194 Ω237 Ω1,315 ΩMust operate voltage 80% max. of rated voltage Must release voltage 10% min. of rated voltageMax. voltage 150% of rated voltage at 23°C to 70°C Power consumption Approx. 100 mWRated voltage 3 VDC 4.5 VDC 5 VDC 12 VDC 24 VDC Rated current 33.0 mA 23.2 mA 21.1 mA 9.1 mA 4.6 mA Coil resistance 91 Ω194 Ω237 Ω1,315 Ω5,220 ΩMust operate voltage 80% max. of rated voltage Must release voltage 10% min. of rated voltageMax. voltage 150% of rated voltage at 23°C to 70°C Power consumption Approx. 100 mWRated voltage 3 VDC 4.5 VDC 5 VDC 12 VDC 24 VDC Rated current 33.0 mA 23.2 mA 21.1 mA 9.1 mA 4.6 mA Coil resistance 91 Ω194 Ω237 Ω1,315 Ω5,220 ΩMust set voltage 75% max. of rated voltage Must reset voltage 75% max. of rated voltageMax. voltage 150% of rated voltage at 23°C to 70°C Power consumption Approx. 100 mW93■Contact Ratings■CharacteristicsNote:The above values are initial values.Note:1.The contact resistance was measured with 10 mA at 1 VDC with a voltage-drop method.2.Values in parentheses are actual values.3.The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking the dielectric strength.4.This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50 Ω. This value may vary depending on the switching frequency and operating environment. Always double-check relay suitability under actual operating conditions.Load Resistive loadRated load0.3 A at 125 VAC; 1 A at 30 VDC Rated carry current 1 AMax. switching voltage 125 VAC, 60 VDC Max. switching current 1 AItemSingle-side stable models (double-pole)Single-winding latchingmodel G6K-2F, G6K-2G, G6K-2PG6K-2F-Y, G6K-2G-Y,G6K-2P-YG6KU-2F-Y, G6KU-2G-Y,G6KU-2P-Y Contact resistance (See note 1.)100 m Ω max.Operating (set) time (See note 2.) 3 ms max. (approx. 1.4 ms) 3 ms max. (approx. 1.2 ms)Release (reset) time (See note 2.) 3 ms max. (approx. 1.3 ms) 3 ms max. (approx. 1.2 ms)Insulation resistance (See note 3.)1,000 M Ω min. (at 500 VDC)Dielectric strengthCoil and contacts1,500 VAC, 50/60 Hz for 1 minContacts of different polarity1,000 VAC, 50/60 Hz for 1 min Contacts of same po-larity750 VAC, 50/60 Hz for 1 min Impulse withstand voltageCoil and contacts1,500 V (10 x 160 µs)2,500 V (2 x 10 µs), 1,500 V (10 x 160 µs)Contacts of different polarity1,500 V (10 x 160 µs)Contacts of same po-larityVibration resistanceDestruction: 10 to 55 Hz, 2.5-mm single amplitude (5-mm double amplitude) and 55 to 500 Hz, 300 m/s 2 (approx. 30G)Malfunction: 10 to 55 Hz, 1.65-mm single amplitude (3.3-mm double amplitude) and 55 to 500 Hz, 200 m/s 2 (approx. 20G)Shock resistance Destruction: 1,000 ms 2 (approx. 100G)Malfunction: 750 ms 2 (approx. 75G)EnduranceMechanical: 50,000,000 operations min. (at 36,000 operations/hour)Electrical: 100,000 operations min. (with a rated load at 1,800 operations/hour)Failure rate (P level) (See note 4.)10 µA at 10 mVDCAmbient temperature Operating: −40°C to 70°C (with no icing or condensation)Ambient humidity Operating: 5% to 85%Weight Approx. 0.7 g94Engineering DataMaximum Switching PowerAmbient Temperature vs. Maximum Coil Voltage Ambient Temperature vs. Switching CurrentS w i t c h i n g c u r r e n t (A )M a x i m u m c o i l v o l t a g e (%)S w i t c h i n g c u r r e n t (A )DC resistive loadSwitching voltage (V)Ambient temperature (°C)Ambient temperature (°C)AC resistive loadNote: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage.EnduranceAmbient Temperature vs. MustOperate or Must Release VoltageG6K-2G (F/P), G6K-2G (F/P)-YS w i t c h i n g o p e r a t i o n s (x 10 o p e r a t i o n s )O n t h e b a s i s o f r a t e d v o l t a g e (%)Switching current (A)125 VAC resistive loadAmbient temperature: 23°C Switching frequency: 1,800 operations/hourAmbient temperature (°C)430 VDC resistive loadAmbient temperature: 23°C Switching frequency: 1,800 operations/hourMax. estimated valueMust operate voltage Must release voltageAmbient Temperature vs. Must Set or Must Reset VoltageG6KU-2G (F/P)-YO n t h e b a s i s o f r a t e d v o l t a g e (%)Ambient temperature (°C)Max. estimated valueElectrical Endurance(with Must Operate and Must Re lease Voltage) (See note.)G6K-2G (F/P), G6K-2G (F/P)-YElectrical Endurance(Contact Resistance) (See note.)G6K-2G (F/P), G6K-2G (F/P)-YC o n t a c t r e s i s t a n c e (m Ω)Operating frequency (x10 operations)O n t h e b a s i s o f r a t e d v o l t a g e (%)Operating frequency (x103operations)Must operateMust releaseSample: G6K-2GSample: G6K-2GT est conditions: 1 A resistive loadNO contact NC contactContact resistanceShock MalfunctionEnergizedNotenergizedShock directionUnit: m/s Sample: G6K-2GNumber of Relays: 10Conditions: Shock is applied in ±X, ±Y , and ±Z directions three times each with and with out energizing the Relays to check the number of contact malfunctions.32Switching frequency: 1,800 operations/hNumber of Relays: 10T est conditions: 1 A resistive load at 30 VDC with an operation rate of 50%Number of Relays: 10at 30 VDC with an operation rate of 50%Switching frequency: 1,800 operations/hNote: The tests were conducted at anambient temperature of 23˚C.Note: The tests were conducted at anambient temperature of 23˚C.95Note:1.The tests were conducted at an ambient temperature of 23°C.2.High-frequency characteristics depend on the PCB to which the Relay is mounted. Always check these characteristics including endurance in the actual machine before use.Sample Not energizedSample EnergizedMust operate voltage Must release voltageInitial stage T estAverage value Initial stageT estAverage valueSampleNot energizedSampleEnergizedInitial stageT estAverage value Initial stageT estAverage valueC h a n g e r a t e o n t h e b a s i so f i n i t i a l v a l u e (%)C h a n g e r a t e o n t h e b a s i s o f i n i t i a l v a l u e (%)C h a n g e r a t e o n t h e b a s i s o f i n i t i a l v a l u e (%)C h a n g e r a t e o n t h e b a s i s o f i n i t i a l v a l u e (%)Must operate voltage Must release voltageOperating frequency (x10 operations)Sample: G6K-2GNumber of Relays: 10T est conditions: 10 mA resistive load at 10 mVDC with an operation rate of 50 %Switching frequency: 7,200 operations/hC o n t a c t r e s i s t a n c e (m )ΩNO contact NC contact(Average value)C h a n g e r a t e o n t h e b a s i s o f i n i t i a l v a l u e (%Sample: G6K-2GNumber of Relays: 10Must operate voltage Must release voltageExternal magnetic field (A/m)(Average value)C h a n g e r a t e o n t h e b a s i s o f i n i t i a l v a l u e (%Sample: G6K-2GNumber of Relays: 10Must operate voltage Must release voltageExternal magnetic field (A/m)(Average value)C h a n g e r a t e o n t h e b a s i s o f i n i t i a l v a l u e (%Sample: G6K-2GNumber of Relays: 10External magnetic field (A/m)Must operate voltage Must release voltage396DimensionsNote:All units are in millimeters unless otherwise indicated.■DPDTG6K-2G (F/P), G6K-2G (F/P)-YN u m b e r o f c o n t a c t sSample: G6K-2GNumber of Relays: 50Time (ms)Sample: G6K-2GNumber of Relays: 50a n g e r a t e o n t h eb a s i s o f r a t e d v a l u e (%After testG6K-2G (F/P) , G6K-2G (F/P)-YN u m b e r o f c o n t a c t sMust operate bounce time Must operate voltage Must release voltageTime (ms)Must release bounce timeMust operate Must release timeG6K-2FMounting Dimensions (Top View)Terminal Arrangement/Internal Connections (Top View)Orientation markNote: Each value has a tolerance of ±0.3 mm.G6K-2GMounting Dimensions (Top View)Terminal Arrangement/Internal Connections (Top View)Orientation markNote: Each value has a tolerance of ±0.3 mm.Tolerance: ±0.1 mmTolerance: ±0.1 mmG6K-2PMounting Dimensions (Bottom View)Terminal Arrangement/Internal Connections(Bottom View)Orientation markNote: Each value has a tolerance of ±0.3 mm.Eight, 0.8-dia. holesTolerance: ±0.1 mmG6K-2F-Y G6K-2G-Y G6K-2P-YMounting Dimensions (Top View)Terminal Arrangement/Internal Connections(Top View)Orientation mark Note: Each value has a tolerance of ±0.3 mm.Mounting Dimensions (Top View)Terminal Arrangement/Internal Connections(Top View)Orientation mark Note: Each value has a tolerance of ±0.3 mm.Tolerance: ±0.1 mmTolerance: ±0.1 mmMounting Dimensions (Bottom View)Terminal Arrangement/Internal Connections(Bottom View)Orientation mark Note: Each value has a tolerance of ±0.3 mm.Eight,0.8-dia. holesTolerance: ±0.1 mmG6KU-2F-Y G6KU-2G-Y G6KU-2P-YMounting Dimensions (Top View)Terminal Arrangement/Internal Connections(Top View)Orientation mark Note: Each value has a tolerance of ±0.3 mm.Mounting Dimensions (Top View)Terminal Arrangement/Internal Connections(Top View)Orientation mark Note: Each value has a tolerance of ±0.3 mm.Tolerance: ±0.1 mmTolerance: ±0.1 mmMounting Dimensions (Bottom View)Terminal Arrangement/Internal Connections(Bottom View)Orientation mark Note: Each value has a tolerance of ±0.3 mm.Eight, 0.8-dia. holesTolerance: ±0.1 mm9798Stick Packing and Tape PackingStick PackingRelays in stick packing are arranged so that the orientation mark of each Relay in on the left side. Fifty Relays are packed on one stick.Be sure not to make mistakes in Relay orientation when mounting the Relay to the PCB.Stick length: 520 mm (stopper not included)No. of Relays per stick: 50Tape Packing (Surface Mounting Terminal Models)When ordering Relays in tape packing, add the prefix “-TR” to the model number, otherwise the Relays in stick packing will be pro-vided.T ape Type:ETX7200(EIAJ (Electronic Industrial Association of Japan))Reel type:RPM-16D (EIAJ)Relays per Reel: 900Stopper (gray)Orientation of RelaysStopper (green)1. Direction of Relay Insertion2. Reel Dimensions3. Carrier Tape DimensionsT op tape (cover tape)Carrier tapePulling directionOrientation markPulling directionG6K-2F , G6K-2F-Y , G6KU-2F-YG6K-2G, G6K-2G-Y , G6KU-2G-YEmboss tape99Recommended Soldering MethodT emperature indicate the surface temperature of the PCBs.IRS Method (for surface mounting terminal models)(1) IRS Method (Mounting Solder: Lead)(2) IRS Method (Mounting Solder: Lead-free)••In order to perform correct soldering, it is recommended that the correct soldering conditions be maintained as shown below on the left side.Visually check that the Relay is properly soldered.■Approved StandardsUL approval:UL1950 (File No. E41515)CSA approval:C22.2 No. 950 (File No. LR31928)T e m p e r a t u r e (°C )SolderingPreheatingTime (s)220 to 245180 to 20015090 to 12020 to 30Contact form Coil ratingContact ratingNumber of test operations DPDTG6K-2G(F/P): 3 to 12 VDCG6K(U)-2G(F/P)-Y: 3 to 24 VDC1 A at 30 VDC 0.5 A at 60 VDC 0.3 A at 125 VAC6,000Correct SolderingIncorrect SolderingPCBT erminalSolder Relay LandExcessive amount of solderInsufficient amount of solderPrecautionsRefer to page25 for information on general precautions. Be sure to read these precautions before using the Relay.Correct UseLong-term Continuously ON ContactsUsing the Relay in a circuit where the Relay will be ON continu-ously for long periods (without switching) can lead to unstable contacts because the heat generated by the coil itself will affect the insulation, causing a film to develop on the contact surfaces. We recommend using a latching relay (magnetic-holding relay) in this kind of circuit. If a single-side stable model must be used in this kind of circuit, we recommend using a fail-safe circuit design that provides protection against contact failure or coil burnout. Relay HandlingUse the Relay as soon as possible after opening the moisture-proof package. If the Relay is left for a long time after opening the moisture-proof package, the appearance may suffer and seal fail-ure may occur after the solder mounting process. To store the Relay after opening the moisture-proof package, place it into the original package and sealed the package with adhesive tape. When washing the product after soldering the Relay to a PCB, use a water-based solvent or alcohol-based solvent, and keep the solvent temperature to less than 40°C. Do not put the Relay in a cold cleaning bath immediately after soldering.SolderingSoldering temperature: Approx. 250°C (260°C if the DWS method is used)Soldering time: Approx. 5 s max. (approx. 2 s for the first time and approx. 3 s for the second time if the DWS method is used)Be sure to adjust the level of the molten solder so that the solder will not overflow onto the PCB.Claw Securing Force During Automatic MountingDuring automatic insertion of Relays, make sure to set the secur-ing force of each claw to the following so that the Relays charac-teristics will be maintained.Environmental Conditions During Operation, Storage, and TransportationProtect the Relay from direct sunlight and keep the Relay under normal temperature, humidity, and pressure.If the Relay is stored for a long time in an adverse environment with high temperature, high humidity, organic gases, or sulfide gases, sulfide or oxide films will form on the contact surfaces. These films may result in unstable contact, contact problems, or functional problems. Therefore, operate, store, or transport the product under specified environmental tching Relay MountingMake sure that the vibration or shock that is generated from other devices, such as relays in operation, on the same panel and imposed on the Latching Relay does not exceed the rated value, otherwise the Latching Relay that has been set may be reset or vice versa. The Latching Relay is reset before shipping. If exces-sive vibration or shock is imposed, however, the Latching Relay may be set accidentally. Be sure to apply a reset signal before use.Maximum Allowable VoltageThe maximum allowable voltage of the coil can be obtained from the coil temperature increase and the heat-resisting temperature of coil insulating sheath material. (Exceeding the heat-resisting temperature may result in burning or short-circuiting.) The maxi-mum allowable voltage also involves important restrictions which include the following:•Must not cause thermal changes in or deterioration of the insu-lating material.•Must not cause damage to other control devices.•Must not cause any harmful effect on people.•Must not cause fire.Therefore, be sure to use the maximum allowable voltage beyond the value specified in the catalog.As a rule, the rated voltage must be applied to the coil. A voltage exceeding the rated value, however, can be applied to the coil provided that the voltage is less than the maximum allowable volt-age. It must be noted that continuous voltage application to the coil will cause a coil temperature increase thus affecting charac-teristics such as electrical life and resulting in the deterioration of coil insulation.CoatingThe Relay mounted on the PCB may be coated or washed but do not apply silicone coating or detergent containing silicone, other-wise the silicone coating or detergent may remain on the surface of the Relay.PCB MountingIf two or more Relays are closely mounted with the long sides of the Relays facing each other and soldering is performed with infrared radiation, the solder may not be properly exposed to the infrared rays. Be sure to keep the proper distance between adja-cent Relays as shown below.Two or more Relays may be closely mounted with the short sides of the Relays facing each other.Direction A: 1.96 NDirection B: 4.90 NDirection C: 1.96 NG6K-2GG6K-2F2 mm min.2.7 mm min.ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.To convert millimeters into inches, multiply by 0.03937. T o convert grams into ounces, multiply by 0.03527. Cat. No. K106-E1-04100。
G6K-2P-Y中文资料
1.Relay functionNone:Single-side stable modelU:Single-winding latching model 2.Contact form2:DPDTF:Outside-L surface mounting terminalG:Inside-L surface mounting terminalP:PCB terminal4.Approved standardsNone:UL, CSADoes not conform to Telcordia specifications Y:UL, CSAConforms to Telcordia specifications: 2,500 V for 2 x10 µs5.Rated Coil Voltage3, 4.5, 5, 12, 24 VDCRC9192Application ExamplesT elephones, communications equipment, measurement devices, office automation machines, and audio–visual products.SpecificationsContact mechanism:Bifurcated crossbar Ag (Au-alloy contact)Enclosure ratings:Fully sealed ■Coil RatingsSingle-side Stable ModelsG6K-2F, G6K-2G, G6K-2P Note:1.The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.2.The operating characteristics are measured at a coil temperature of 23°C.3.The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously.Single-side Stable Models (Bellcore Version)G6K-2F-Y, G6K-2G-Y, G6K-2P-Y Note:1.The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.2.The operating characteristics are measured at a coil temperature of 23°C.3.The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously.Single-winding Latching Models (Bellcore Version)G6KU-2F-Y, G6KU-2G-Y, G6KU-2P-Y Note:1.The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.2.The operating characteristics are measured at a coil temperature of 23°C.3.The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously.Rated voltage 3 VDC 4.5 VDC 5 VDC 12 VDC Rated current 33.0 mA 23.2 mA 21.1 mA 9.1 mA Coil resistance 91 Ω194 Ω237 Ω1,315 ΩMust operate voltage 80% max. of rated voltage Must release voltage 10% min. of rated voltageMax. voltage 150% of rated voltage at 23°C to 70°C Power consumption Approx. 100 mWRated voltage 3 VDC 4.5 VDC 5 VDC 12 VDC 24 VDC Rated current 33.0 mA 23.2 mA 21.1 mA 9.1 mA 4.6 mA Coil resistance 91 Ω194 Ω237 Ω1,315 Ω5,220 ΩMust operate voltage 80% max. of rated voltage Must release voltage 10% min. of rated voltageMax. voltage 150% of rated voltage at 23°C to 70°C Power consumption Approx. 100 mWRated voltage 3 VDC 4.5 VDC 5 VDC 12 VDC 24 VDC Rated current 33.0 mA 23.2 mA 21.1 mA 9.1 mA 4.6 mA Coil resistance 91 Ω194 Ω237 Ω1,315 Ω5,220 ΩMust set voltage 75% max. of rated voltage Must reset voltage 75% max. of rated voltageMax. voltage 150% of rated voltage at 23°C to 70°C Power consumption Approx. 100 mW93■Contact Ratings■CharacteristicsNote:The above values are initial values.Note:1.The contact resistance was measured with 10 mA at 1 VDC with a voltage-drop method.2.Values in parentheses are actual values.3.The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking the dielectric strength.4.This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50 Ω. This value may vary depending on the switching frequency and operating environment. Always double-check relay suitability under actual operating conditions.Load Resistive loadRated load0.3 A at 125 VAC; 1 A at 30 VDC Rated carry current 1 AMax. switching voltage 125 VAC, 60 VDC Max. switching current 1 AItemSingle-side stable models (double-pole)Single-winding latchingmodel G6K-2F, G6K-2G, G6K-2PG6K-2F-Y, G6K-2G-Y,G6K-2P-YG6KU-2F-Y, G6KU-2G-Y,G6KU-2P-Y Contact resistance (See note 1.)100 m Ω max.Operating (set) time (See note 2.) 3 ms max. (approx. 1.4 ms) 3 ms max. (approx. 1.2 ms)Release (reset) time (See note 2.) 3 ms max. (approx. 1.3 ms) 3 ms max. (approx. 1.2 ms)Insulation resistance (See note 3.)1,000 M Ω min. (at 500 VDC)Dielectric strengthCoil and contacts1,500 VAC, 50/60 Hz for 1 minContacts of different polarity1,000 VAC, 50/60 Hz for 1 min Contacts of same po-larity750 VAC, 50/60 Hz for 1 min Impulse withstand voltageCoil and contacts1,500 V (10 x 160 µs)2,500 V (2 x 10 µs), 1,500 V (10 x 160 µs)Contacts of different polarity1,500 V (10 x 160 µs)Contacts of same po-larityVibration resistanceDestruction: 10 to 55 Hz, 2.5-mm single amplitude (5-mm double amplitude) and 55 to 500 Hz, 300 m/s 2 (approx. 30G)Malfunction: 10 to 55 Hz, 1.65-mm single amplitude (3.3-mm double amplitude) and 55 to 500 Hz, 200 m/s 2 (approx. 20G)Shock resistance Destruction: 1,000 ms 2 (approx. 100G)Malfunction: 750 ms 2 (approx. 75G)EnduranceMechanical: 50,000,000 operations min. (at 36,000 operations/hour)Electrical: 100,000 operations min. (with a rated load at 1,800 operations/hour)Failure rate (P level) (See note 4.)10 µA at 10 mVDCAmbient temperature Operating: −40°C to 70°C (with no icing or condensation)Ambient humidity Operating: 5% to 85%Weight Approx. 0.7 g94Engineering DataMaximum Switching PowerAmbient Temperature vs. Maximum Coil Voltage Ambient Temperature vs. Switching CurrentS w i t c h i n g c u r r e n t (A )M a x i m u m c o i l v o l t a g e (%)S w i t c h i n g c u r r e n t (A )DC resistive loadSwitching voltage (V)Ambient temperature (°C)Ambient temperature (°C)AC resistive loadNote: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage.EnduranceAmbient Temperature vs. MustOperate or Must Release VoltageG6K-2G (F/P), G6K-2G (F/P)-YS w i t c h i n g o p e r a t i o n s (x 10 o p e r a t i o n s )O n t h e b a s i s o f r a t e d v o l t a g e (%)Switching current (A)125 VAC resistive loadAmbient temperature: 23°C Switching frequency: 1,800 operations/hourAmbient temperature (°C)430 VDC resistive loadAmbient temperature: 23°C Switching frequency: 1,800 operations/hourMax. estimated valueMust operate voltage Must release voltageAmbient Temperature vs. Must Set or Must Reset VoltageG6KU-2G (F/P)-YO n t h e b a s i s o f r a t e d v o l t a g e (%)Ambient temperature (°C)Max. estimated valueElectrical Endurance(with Must Operate and Must Re lease Voltage) (See note.)G6K-2G (F/P), G6K-2G (F/P)-YElectrical Endurance(Contact Resistance) (See note.)G6K-2G (F/P), G6K-2G (F/P)-YC o n t a c t r e s i s t a n c e (m Ω)Operating frequency (x10 operations)O n t h e b a s i s o f r a t e d v o l t a g e (%)Operating frequency (x103operations)Must operateMust releaseSample: G6K-2GSample: G6K-2GT est conditions: 1 A resistive loadNO contact NC contactContact resistanceShock MalfunctionEnergizedNotenergizedShock directionUnit: m/s Sample: G6K-2GNumber of Relays: 10Conditions: Shock is applied in ±X, ±Y , and ±Z directions three times each with and with out energizing the Relays to check the number of contact malfunctions.32Switching frequency: 1,800 operations/hNumber of Relays: 10T est conditions: 1 A resistive load at 30 VDC with an operation rate of 50%Number of Relays: 10at 30 VDC with an operation rate of 50%Switching frequency: 1,800 operations/hNote: The tests were conducted at anambient temperature of 23˚C.Note: The tests were conducted at anambient temperature of 23˚C.95Note:1.The tests were conducted at an ambient temperature of 23°C.2.High-frequency characteristics depend on the PCB to which the Relay is mounted. Always check these characteristics including endurance in the actual machine before use.Sample Not energizedSample EnergizedMust operate voltage Must release voltageInitial stage T estAverage value Initial stageT estAverage valueSampleNot energizedSampleEnergizedInitial stageT estAverage value Initial stageT estAverage valueC h a n g e r a t e o n t h e b a s i so f i n i t i a l v a l u e (%)C h a n g e r a t e o n t h e b a s i s o f i n i t i a l v a l u e (%)C h a n g e r a t e o n t h e b a s i s o f i n i t i a l v a l u e (%)C h a n g e r a t e o n t h e b a s i s o f i n i t i a l v a l u e (%)Must operate voltage Must release voltageOperating frequency (x10 operations)Sample: G6K-2GNumber of Relays: 10T est conditions: 10 mA resistive load at 10 mVDC with an operation rate of 50 %Switching frequency: 7,200 operations/hC o n t a c t r e s i s t a n c e (m )ΩNO contact NC contact(Average value)C h a n g e r a t e o n t h e b a s i s o f i n i t i a l v a l u e (%Sample: G6K-2GNumber of Relays: 10Must operate voltage Must release voltageExternal magnetic field (A/m)(Average value)C h a n g e r a t e o n t h e b a s i s o f i n i t i a l v a l u e (%Sample: G6K-2GNumber of Relays: 10Must operate voltage Must release voltageExternal magnetic field (A/m)(Average value)C h a n g e r a t e o n t h e b a s i s o f i n i t i a l v a l u e (%Sample: G6K-2GNumber of Relays: 10External magnetic field (A/m)Must operate voltage Must release voltage396DimensionsNote:All units are in millimeters unless otherwise indicated.■DPDTG6K-2G (F/P), G6K-2G (F/P)-YN u m b e r o f c o n t a c t sSample: G6K-2G Number of Relays: 50Time (ms)Sample: G6K-2GNumber of Relays: 50a n g e r a t e o n t h eb a s i s o f r a t e d v a l u e (%After testG6K-2G (F/P) , G6K-2G (F/P)-YN u m b e r o f c o n t a c t sMust operatebounce time Must operate voltage Must release voltageTime (ms)Must release bounce timeMust operate Must release timeG6K-2FMounting Dimensions (Top View)Terminal Arrangement/Internal Connections (Top View)Orientation markNote: Each value has a tolerance of ±0.3 mm.G6K-2GMounting Dimensions (Top View)Terminal Arrangement/Internal Connections (Top View)Orientation markNote: Each value has a tolerance of ±0.3 mm.Tolerance: ±0.1 mmTolerance: ±0.1 mmG6K-2PMounting Dimensions (Bottom View)Terminal Arrangement/Internal Connections(Bottom View)Orientation markNote: Each value has a tolerance of ±0.3 mm.Eight, 0.8-dia. holesTolerance: ±0.1 mmG6K-2F-Y G6K-2G-Y G6K-2P-YMounting Dimensions (Top View)Terminal Arrangement/Internal Connections(Top View)Orientation mark Note: Each value has a tolerance of ±0.3 mm.Mounting Dimensions (Top View)Terminal Arrangement/Internal Connections(Top View)Orientation mark Note: Each value has a tolerance of ±0.3 mm.Tolerance: ±0.1 mmTolerance: ±0.1 mmMounting Dimensions (Bottom View)Terminal Arrangement/Internal Connections(Bottom View)Orientation mark Note: Each value has a tolerance of ±0.3 mm.Eight,0.8-dia. holesTolerance: ±0.1 mmG6KU-2F-Y G6KU-2G-Y G6KU-2P-YMounting Dimensions (Top View)Terminal Arrangement/Internal Connections(Top View)Orientation mark Note: Each value has a tolerance of ±0.3 mm.Mounting Dimensions (Top View)Terminal Arrangement/Internal Connections(Top View)Orientation mark Note: Each value has a tolerance of ±0.3 mm.Tolerance: ±0.1 mmTolerance: ±0.1 mmMounting Dimensions (Bottom View)Terminal Arrangement/Internal Connections(Bottom View)Orientation mark Note: Each value has a tolerance of ±0.3 mm.Eight, 0.8-dia. holesTolerance: ±0.1 mm9798Stick Packing and Tape PackingStick PackingRelays in stick packing are arranged so that the orientation mark of each Relay in on the left side. Fifty Relays are packed on one stick.Be sure not to make mistakes in Relay orientation when mounting the Relay to the PCB.Stick length: 520 mm (stopper not included)No. of Relays per stick: 50Tape Packing (Surface Mounting Terminal Models)When ordering Relays in tape packing, add the prefix “-TR” to the model number, otherwise the Relays in stick packing will be pro-vided.T ape Type:ETX7200(EIAJ (Electronic Industrial Association of Japan))Reel type:RPM-16D (EIAJ)Relays per Reel: 900Stopper (gray)Orientation of RelaysStopper (green)1. Direction of Relay Insertion2. Reel Dimensions3. Carrier Tape DimensionsT op tape (cover tape)Carrier tapePulling directionOrientation markPulling directionG6K-2F , G6K-2F-Y , G6KU-2F-YG6K-2G, G6K-2G-Y , G6KU-2G-YEmboss tape99Recommended Soldering MethodT emperature indicate the surface temperature of the PCBs.IRS Method (for surface mounting terminal models)(1) IRS Method (Mounting Solder: Lead)(2) IRS Method (Mounting Solder: Lead-free)••In order to perform correct soldering, it is recommended that the correct soldering conditions be maintained as shown below on the left side.Visually check that the Relay is properly soldered.■Approved StandardsUL approval:UL1950 (File No. E41515)CSA approval:C22.2 No. 950 (File No. LR31928)T e m p e r a t u r e (°C )SolderingPreheatingTime (s)220 to 245180 to 20015090 to 12020 to 30Contact form Coil ratingContact ratingNumber of test operations DPDTG6K-2G(F/P): 3 to 12 VDCG6K(U)-2G(F/P)-Y: 3 to 24 VDC1 A at 30 VDC 0.5 A at 60 VDC 0.3 A at 125 VAC6,000Correct SolderingIncorrect SolderingPCBT erminalSolder Relay LandExcessive amount of solderInsufficient amount of solderPrecautionsRefer to page25 for information on general precautions. Be sure to read these precautions before using the Relay.Correct UseLong-term Continuously ON ContactsUsing the Relay in a circuit where the Relay will be ON continu-ously for long periods (without switching) can lead to unstable contacts because the heat generated by the coil itself will affect the insulation, causing a film to develop on the contact surfaces. We recommend using a latching relay (magnetic-holding relay) in this kind of circuit. If a single-side stable model must be used in this kind of circuit, we recommend using a fail-safe circuit design that provides protection against contact failure or coil burnout. Relay HandlingUse the Relay as soon as possible after opening the moisture-proof package. If the Relay is left for a long time after opening the moisture-proof package, the appearance may suffer and seal fail-ure may occur after the solder mounting process. To store the Relay after opening the moisture-proof package, place it into the original package and sealed the package with adhesive tape. When washing the product after soldering the Relay to a PCB, use a water-based solvent or alcohol-based solvent, and keep the solvent temperature to less than 40°C. Do not put the Relay in a cold cleaning bath immediately after soldering.SolderingSoldering temperature: Approx. 250°C (260°C if the DWS method is used)Soldering time: Approx. 5 s max. (approx. 2 s for the first time and approx. 3 s for the second time if the DWS method is used)Be sure to adjust the level of the molten solder so that the solder will not overflow onto the PCB.Claw Securing Force During Automatic MountingDuring automatic insertion of Relays, make sure to set the secur-ing force of each claw to the following so that the Relays charac-teristics will be maintained.Environmental Conditions During Operation, Storage, and TransportationProtect the Relay from direct sunlight and keep the Relay under normal temperature, humidity, and pressure.If the Relay is stored for a long time in an adverse environment with high temperature, high humidity, organic gases, or sulfide gases, sulfide or oxide films will form on the contact surfaces. These films may result in unstable contact, contact problems, or functional problems. Therefore, operate, store, or transport the product under specified environmental tching Relay MountingMake sure that the vibration or shock that is generated from other devices, such as relays in operation, on the same panel and imposed on the Latching Relay does not exceed the rated value, otherwise the Latching Relay that has been set may be reset or vice versa. The Latching Relay is reset before shipping. If exces-sive vibration or shock is imposed, however, the Latching Relay may be set accidentally. Be sure to apply a reset signal before use.Maximum Allowable VoltageThe maximum allowable voltage of the coil can be obtained from the coil temperature increase and the heat-resisting temperature of coil insulating sheath material. (Exceeding the heat-resisting temperature may result in burning or short-circuiting.) The maxi-mum allowable voltage also involves important restrictions which include the following:•Must not cause thermal changes in or deterioration of the insu-lating material.•Must not cause damage to other control devices.•Must not cause any harmful effect on people.•Must not cause fire.Therefore, be sure to use the maximum allowable voltage beyond the value specified in the catalog.As a rule, the rated voltage must be applied to the coil. A voltage exceeding the rated value, however, can be applied to the coil provided that the voltage is less than the maximum allowable volt-age. It must be noted that continuous voltage application to the coil will cause a coil temperature increase thus affecting charac-teristics such as electrical life and resulting in the deterioration of coil insulation.CoatingThe Relay mounted on the PCB may be coated or washed but do not apply silicone coating or detergent containing silicone, other-wise the silicone coating or detergent may remain on the surface of the Relay.PCB MountingIf two or more Relays are closely mounted with the long sides of the Relays facing each other and soldering is performed with infrared radiation, the solder may not be properly exposed to the infrared rays. Be sure to keep the proper distance between adja-cent Relays as shown below.Two or more Relays may be closely mounted with the short sides of the Relays facing each other.Direction A: 1.96 NDirection B: 4.90 NDirection C: 1.96 NG6K-2GG6K-2F2 mm min.2.7 mm min.ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.To convert millimeters into inches, multiply by 0.03937. T o convert grams into ounces, multiply by 0.03527. Cat. No. K106-E1-04100。
视频信号
复合视频接口 RCA接口
AV接口是一种混合视频信号，没有经过RF射频信号调制、放大、检波、解调等 过程，信号保真度相对较好。图像品质影响受使用的线材影响大，分辨率一般可 达350-450线，不过由于它是模拟接口，用于数字显示设备时，需要一个模拟信号 转数字信号的过程，会损失不少信噪比。
S视频端子
VGA接口是一种D型接口，上 面共有15针孔，分成三排，每 排五个。一般在VGA接头上， 会1，5，6，10，11，15等标明 每个接口编号。比较重要的是3 根RGB彩色分量信号和2根扫描 同步信号行（HSYNC）和场 （VSYNC）针，还有最外层屏 蔽线。 通常，我们焊接的针头有1、2、 3、6、7、8和外壳屏蔽线。
注意事项
7针的S-Video接口可以直接使用4针S端子线，不必另行购买连接线。另外，还有 部分显卡自带的7针S-Video能够提供色差输出，其针脚的定义有别于上述标准。S 端子（S-Video）连接采用Y/C（亮度/色度Chromaticity）分离式输出，使用四芯 线传送信号，接口为四针接口。接口中，两针接地，另外两针分别传输亮度和色 度信号。因为分别传送亮度和色度信号，S端子效果要好于复合视频。不过S端子 的抗干扰能力较弱，所以S端子线的长度最好不要超过7米。
S-Video也称二分量视频接口，同AV 接口 相比由于它不再进行Y/C混合传输因此也 就无需再进行亮色分离和解码工作，而且 使用各自独立的传输通道在很大程度上避 免了视频设备内信号串扰而产生的图像失 真，极大地提高了图像的清晰度，但SVideo 仍要将两路色差信号(Cr Cb)混合为 一路色度信号C，进行传输然后再在显示 设备内解码为Cb 和Cr 进行处理，这样多 少仍会带来一定信号损失而产生失真。也 是在AV接口的基础上将色度信号C 和亮 度信号Y进行分离，再分别以不同的通道 进行传输。通常采用标准的4芯(不含音效) 或者扩展的7芯( 含音效) 。
Philips 6100系列4K超清超薄智能LED电视说明书
Philips 6000 series4K Ultra Slim Smart LED TV with Pixel Plus UltraHD139 cm (55") 4K Ultra HD LED TV Quad CoreDVB-T/T255PUT61024K Ultra Slim Smart LED TVwith Pixel Plus Ultra HDEnjoy functional elegance and smart connectivity. The Philips 6100 Series boasts 4K Ultra HD picture quality for superb detail. Better still, its built-in Smart TV is easy to use - making it an excellent choice for effortless entertainment.The right features presented elegantly•Ultra Slim lines for a refined profilePassionate about Picture Quality•4K Ultra HD is unlike any resolution you’ve ever seen before•Discover Ultra HD Picture Quality with Pixel Plus Ultra HD•Micro Dimming optimizes the contrast on your TVConnect to a bigger world with this Smart TV•Smart TV: a whole new world to exploreHighlightsUltra Slim profileSleek. Cutting edge. Refined. Precise. The Philips Ultra Slim silhouette. That something so slim can inspire so much interest shouldn’t be surprising, given how much sophistication it will bring to your décor.4K Ultra HDUltra HD TV has four times the resolution of a conventional Full HD TV. With over 8 million pixels and our unique Ultra Resolution Upscaling technology, you'll experience the best possible picture quality. The higher the quality of your original content, the better images and resolution you will be able to experience. Enjoy improved sharpness,increased depth perception, superior contrast, smooth natural motion, and flawless details.Pixel Plus Ultra HDExperience 4K Ultra HD sharpness with the Philips Pixel Plus Ultra HD engine. It optimizes picture quality to deliver smooth, fluid images with incredible detail and depth – Enjoy sharper 4K images with brighter whites and blacker blacks every time.Smart TVDiscover a Smarter experience that lies beyond traditional TV. Rent and stream movies, videos or games from online videostores. Watch catch-up TV from your favorite channels and enjoy a growing selection of online apps with Smart TV.Micro DimmingThanks to our special software that analyzes the picture in 6400 different zones and adjusts it accordingly, you’ll enjoy incredible contrast and image quality for a truly lifelike visualexperience.Issue date 2018-07-16 Version: 6.2.212 NC: 8670 001 44867 EAN: 87 18863 01203 1© 2018 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.SpecificationsPicture/Display•Display: 4K Ultra HD LED•Panel resolution: 3840x2160•Aspect ratio: 16:9•Brightness: 350 cd/m²•Picture enhancement: Pixel Plus Ultra HD, Micro DimmingSmart TV Features•User Interaction: MultiRoom Client, SimplyShare, Wi-Fi Miracast Certified*•Interactive TV:HbbTV•Program: Pause TV, USB Recording*•SmartTV apps*: Online Video Stores, Open Internet Browser, Social TV, TV on Demand, Youtube, Netflix TV•Ease of Installation: Auto detect Philips devices, Device connection wizard, Network installation wizard, Settings assistant wizard•Firmware upgradeable: Firmware auto upgrade wizard, Firmware upgradeable via USB, Online firmware upgrade•Screen Format Adjustments: Advance - Shift, Basic - Fill Screen, Fit to Screen, Zoom, Stretch •Philips TV Remote app*: Apps, Channels, Control, NowOnTV, TV Guide, Video On Demand Sound•Output power (RMS): 20W•Sound Enhancement: Incredible Surround, Clear Sound, Auto Volume Leveller, Smart Sound Connectivity•Number of HDMI connections: 4•Number of component in (YPbPr): 1•Number of AV connections: 1•Number of USBs: 3•Wireless connections: Wi-Fi 11n 2x2 integrated, Wi-Fi Direct•Other connections: Antenna IEC75, Digital audio out (optical), Audio L/R in, Audio in (DVI), Headphone out, Service connector, Ethernet-LAN RJ-45•HDMI features:Audio Return Channel •EasyLink (HDMI-CEC): Remote control pass-through, System audio control, System standby, Pixel Plus link (Philips)*, One touch play Multimedia Applications•Video Playback Formats: Containers: AVI, MKV,H264/MPEG-4 AVC, MPEG-1, MPEG-2, MPEG-4,WMV9/VC1, HEVC (H.265)•Subtitles Formats Support: .SMI, .SRT, .SUB, .TXT,.AAS•Music Playback Formats: AAC, MP3, WAV, WMA(v2 up to v9.2), WMA-PRO (v9 and v10)•Picture Playback Formats: JPEG, BMP, GIF, PNGSupported Display Resolution•Computer inputs on HDMI1/2: up to FHD1920x1080 @60Hz, up to 4K UHD3840x2160 @30Hz•Computer inputs on HDMI3/4: up to 4K UHD3840x2160 @60Hz•Video inputs on HDMI1/2: up to 4K UHD3840x2160 @30Hz, up to FHD1920x1080 @ 60Hz•Video inputs on HDMI3/4: up to 4K UHD3840x2160 @60HzTuner/Reception/Transmission•Digital TV: DVB-T/T2•MPEG Support: MPEG2, MPEG4•Video Playback: NTSC, PAL, SECAM•TV Program guide*: 8 day Electronic ProgramGuide•Signal strength indication•Teletext: 1000 page Hypertext•HEVC supportPower•Mains power: AC 110-240V +/-•Ambient temperature: 5 °C to 35 °C•Standby power consumption: <0.5W•Power Saving Features: Auto switch-off timer,Picture mute (for radio)Dimensions•Box dimensions(W x H x D):1343 x 828 x 168 mm•Set dimensions(W x H x D):1239.20 x 714.04 x 90.26 mm•Set dimensions with stand (W x H x D):1239.20 x 780.32 x 259.06 mm•Product weight: 15.3 kg•Product weight (+stand): 15.6 kg•Weight incl. Packaging: 21.5 kg•VESA wall mount compatible: 400 x 200 mmAccessories•Included accessories: Remote Control, Powercord, Quick start guide, Legal and safety brochure,Table top stand, 2 x AAA Batteries*EPG and actual visibility (up to 8 days) is country and operatordependent.*Energy consumption in kWh per year, based on the powerconsumption of the television operating 4 hours per day for 365days. The actual energy consumption will depend on how thetelevision is used.*The TV supports DVB reception for 'Free to air' broadcast. SpecificDVB operators may not be supported. An up to date list can befound in the FAQ section of the Philips support website. For someoperators Conditional Access and subscripction are required.Contact your operator for more information.*(Philips) only compatible with specific Philips player device.*Philips TV Remote app and related functionalities vary per TV model,operator, and country, as well as smart device model and OS. Formore details please visit: /TVRemoteapp.*Smart TV app offerings vary per TV model and country. For moredetails please visit: /smarttv.*USB recording for digital channels only, recordings may be limited bybroadcast copy protection (CI+). Country and channel restrictionsmay apply.*Compatibility depends on Wifi Miracast certification & Android 4.2or later. For more details please refer to your device documentation.。
Philips 6000系列 4K UHD Slim LED TV 产品说明书
Philips 6000 series 4K UHD Slim LED TV powered by Android™ with Pixel Plus Ultra HD126 cm (50")4K Ultra HD LED TVDual Core; 8GB & expandable DVB-T/T2/C50PUT64004K UHD Slim LED TV powered by Androidwith Pixel Plus Ultra HDThe 6400 Series Ultra HD TV combines Pixel Plus Ultra HD, Dual Core processing and the power of Android to deliver fluid performance-beautifully. Slim lines, an elegant open stand, and loads of features complete the experience.A clear, vivid picture every time•4K Ultra HD: resolution like you’ve never seen it before •Micro Dimming Pro for incredible contrast•Natural Motion for fluid yet sharp moving images•Pixel Plus Ultra HD: discover Ultra HD Picture Quality •Ultra Resolution converts any content into crisp Ultra HDFunctional elegance•Swivel stand lets you enjoy TV from any angleWith Android your TV can do it all•Dual Core processing and Android OS for strong performance •Google Cast: unlock the full potential of your Smart TV •Google Play™: your window to funHighlightsOpen metal swivel standA television with modern, refined lines deserves a stand that lifts it above the ordinary. That’s why the designers at Philips TV created this unique, open metal stand that not only integrates beautifully with your décor, it also lets you swivel the TV to adjust the viewing angle as well!4K Ultra HDUltra HD TV has 4 times the resolution of a conventional Full HD TV. With over 8 million pixels and our unique Ultra Resolution upscaling technology, you’ll experience improved images regardless of the original content. Enjoy improved sharpness, increased depth perception, superior contrast, smooth natural motion, and flawless details.Natural MotionYou love watching movies, but demand the best image possible. Natural Motion is our motion enhancement technology that resolves judder, providing you with a smooth moving image. Films are recorded at a limited frame rate of 24 frames per second resulting in judder. Natural Motion doubles the number of frames to 50 motion changes per second. This resolves judder, so all you see is a fluid, sharperimage.Micro Dimming ProMicro Dimming Pro optimizes the contrast onyour TV based on the light conditions in yourenvironment. A light sensor and specialsoftware analyze the picture in 6400 differentzones so you’ll enjoy incredible contrast andimage quality for a truly lifelike visualexperience-day or night.Ultra ResolutionUltra Resolution converts any content into asharper Ultra HD picture on screen. Advancedupscaling combined with Philips unique linethinning algorithms transform original pixelsinto better pixels. The result is a visibly morerefined image with finer lines, and greater,deeper details.Pixel Plus Ultra HDExperience 4K Ultra HD sharpness fromPhilips. Philips Pixel Plus Ultra HD engineoptimizes picture quality to deliver smooth,fluid images with incredible detail and depth. Sowhether you stream online or watch a DVD,you’ll enjoy sharper 4K images with brighterwhites and blacker blacks—every time andfrom any source.Dual Core + AndroidWith Android on your TV you'll navigate,launch apps and play videos in a way that issuper fast, super intuitive, and super fun. TheAndroid robot liberates the power of our DualCore processor to get things done with speedand ease.Google PlayGoogle Play™ has a rich catalogue of highquality games for all ages. Optimized for use onyour TV, they look as great as they play. Andthere’s no need to clutter up your house withyet another gaming console; with a universalUSB gaming control you can navigate and playwith ease.Google CastUse Google Cast together with your smartdevice* to harness the power of your PhilipsSmart TV. It lets you browse web sites,content and apps, and then ‘cast’ them to yourTV at the push of a button. Best of all, you cancontinue to use your smart device for otherthings even while the casted content is playingon your TV.Issue date 2019-06-17 Version: 8.3.112 NC: 8670 001 23623 EAN: 87 18863 00233 9© 2019 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.SpecificationsPicture/Display•Display: 4K Ultra HD LED•Diagonal screen size: 50 inch / 126 cm•Panel resolution: 3840x2160•Aspect ratio: 16:9•Brightness: 300 cd/m²•Picture enhancement: Pixel Plus Ultra HD, Natural Motion, 700 Hz Perfect Motion Rate, Micro Dimming Pro, Ultra ResolutionAndroid•OS: Android™ 5.1 (Lollipop)•Pre-installed apps: Google Play Movies*, Google Play Music*, Google search, Voice Search, YouTube, Netflix*•Memory size: 8GB, extendable via USB storage Smart TV Features•User Interaction: MultiRoom Client and Server, SimplyShare, Wi-Fi Miracast Certified*•Interactive TV:HbbTV•Program: Pause TV, USB Recording*•SmartTV apps*: Online Video Stores, Open Internet Browser, Social TV, TV on Demand, Youtube•Ease of Installation: Auto detect Philips devices, Device connection wizard, Network installation wizard, Settings assistant wizard•Ease of Use: One-stop Smart Menu button, Onscreen Usermanual•Firmware upgradeable: Firmware auto upgrade wizard, Firmware upgradeable via USB, Online firmware upgrade•Screen Format Adjustments: Basic - Fill Screen, Fit to Screen, Advance - Shift, Zoom, Stretch •Philips TV Remote app*: Apps, Channels, Control, NowOnTV, TV Guide, Video On Demand Sound•Output power (RMS): 20W•Sound Enhancement: Incredible Surround, Clear Sound, Dynamic Bass Enhancement, Smart Sound Connectivity•Number of HDMI connections: 4•Number of component in (YPbPr): 1•Number of scarts(RGB/CVBS):1•Number of USBs: 3•Wireless connections: Dual Band, Wi-Fi Direct,Wi-Fi 802.11n 2x2 integrated•Other connections: Antenna IEC75, CommonInterface Plus (CI+), Ethernet-LAN RJ-45, Digitalaudio out (optical), Audio L/R in, Audio in (DVI),Headphone out, Service connector•HDMI features: 4K, Audio Return Channel•EasyLink (HDMI-CEC): Remote control pass-through, System audio control, System standby,One touch play•HDCP2.2:Yes on HDMI1Multimedia Applications•Video Playback Formats: Containers: AVI, MKV,H264/MPEG-4 AVC, MPEG-1, MPEG-2, MPEG-4,WMV9/VC1, HEVC•Subtitles Formats Support: .SMI, .SRT, .SSA, .SUB,.TXT, .ASS•Music Playback Formats: AAC, MP3, WAV, WMA(v2 up to v9.2), WMA-PRO (v9 and v10)•Picture Playback Formats: JPEG, BMP, GIF, JPS,PNG, PNS, BMS, MPOSupported Display Resolution•Computer inputs on all HDMI: @60Hz, up to 4KUltra HD 3840x2160•Video inputs on HDMI2/3/4: @ 24, 25, 30Hz, up to4K Ultra HD 3840x2160p•Video inputs on HDMI1: @ 24, 25, 30, 50, 60Hz,up to 4K Ultra HD 3840x2160pTuner/Reception/Transmission•Digital TV: DVB-T/T2/C•MPEG Support: MPEG2, MPEG4•Video Playback: NTSC, PAL, SECAM•TV Program guide*: 8 day Electronic ProgramGuide•Signal strength indication•Teletext: 1000 page HypertextPower•Mains power: AC 220 - 240 V 50/60Hz•Ambient temperature: 5 °C to 35 °C•Eu Energy Label power: 69 W•Annual energy consumption: 101 kW·h•Energy Label Class: A+•Standby power consumption: < 0.5 W•Off mode power consumption: < 0.3 W•Power Saving Features: Auto switch-off timer,Light sensor, Picture mute (for radio)Dimensions•Box dimensions(W x H x D):1240 x 740 x 131 mm•Set dimensions (W x H x D): 1124 x 647 x 77 mm•Set dimensions with stand (W x H x D):1124 x 709 x 249 mm•Product weight: 13.3 kg•Product weight (+stand): 14.4 kg•Weight incl. Packaging: 20.5 kg•VESA wall mount compatible: 400 x 200 mmAccessories•Included accessories: Remote Control, 2 x AAABatteries, Tabletop swivel stand, Power cord,Quick start guide, Legal and safety brochure*Android App offerings vary per country. For more details please visityour local Google Play Store.*Compatibility depends on Wifi Miracast certification & Android 4.2or later. For more details please refer to your device documentation.*USB recording for digital channels only, recordings may be limited bybroadcast copy protection (CI+). Country and channel restrictionsmay apply.*The TV supports DVB reception for 'Free to air' broadcast. SpecificDVB operators may not be supported. An up to date list can befound in the FAQ section of the Philips support website. For someoperators Conditional Access and subscripction are required.Contact your operator for more information.*Energy consumption in kWh per year, based on the powerconsumption of the television operating 4 hours per day for 365days. The actual energy consumption will depend on how thetelevision is used.*EPG and actual visibility (up to 8 days) is country and operatordependent.*(Philips) only compatible with specific Philips player device.*Google Cast functionality is subject to Google Cast Ready apps anddevices. For more details please visit Google Cast product page.*Philips TV Remote app and related functionalities vary per TV model,operator, and country, as well as smart device model and OS. Formore details please visit: /TVRemoteapp.*Smart TV app offerings vary per TV model and country. For moredetails please visit: /smarttv.。
Eaton Moeller EASY I O 扩展设备 产品说明书
Eaton 197224Eaton Moeller® series EASY I/O expansion, For use with easyE4, 24 V DC, Inputs expansion (number) analog: 4, screw terminal EASY-E4-DC-4PE1Spécifications généralesEaton Moeller® series EASY I/O expansion197224401508089285458 mm 90 mm 36 mm 0.1 kg IEC/EN 61000-6-3 IEC 60068-2-30 CULus per UL 61010 IEC/EN 61131-2 IEC 60068-2-6 IEC 60068-2-27 IEC/EN 61000-6-2 EN 61010 EN 50178CSA-C22.2 No. 61010 IEC 60664 IEC/EN 61000-4-2 UL ListedUL Category Control No.: NRAQ, NRAQ7UL File No.: E205091 DNV GL CEEASY-E4-DC-4PE1Product NameCatalog Number EANProduct Length/Depth Product Height Product Width Product Weight Certifications Model CodeAdditional measurement aids: Filtering (software), smoothing of analog input signal (PT1 behavior), only with set sampling time, selectable per sensor: yesExpandableExpansion deviceMeasuring principle: Two or three wire per sensor, selectable by connection of sensorCard diagnosticDiagnostics below lower measurement range IP20According to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201Rail mounting possibleTop-hat rail fixing (according to IEC/EN 60715, 35 mm)Wall mounting/direct mountingScrew fixing using fixing brackets ZB4-101-GF1 (accessories) Front build in possibleIII2Control relays easyE4TCP/IPMODBUS≤ 5 %12 Bit (0- 4095, digital, scaling per sensor)EASYSOFT-SWLIC/easySoft7easyE4 extensionDC50 mm Drop height, Drop to IEC/EN 60068-2-31 0.3 m 795 - 1080 hPa (operation) -25 °CFeatures Functions Degree of protection Insulation resistance Mounting methodOvervoltage category Pollution degree Product category ProtocolResidual ripple ResolutionSoftwareTypeVoltage typeDrop and toppleHeight of fall (IEC/EN 60068-2-32) - max Air pressureAmbient operating temperature - minHorizontalVertical15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 18 Impacts57 - 150 Hz, 2 g constant acceleration10 - 57 Hz, 0.15 mm constant amplitudeAccording to IEC/EN 60068-2-655 °C-40 °C70 °CCondensation: prevent with appropriate measuresClearance in air and creepage distances according to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-2015 - 95 % (IEC 60068-2-30, IEC 60068-2-78)8 kV2 kV, Signal cableAccording to IEC/EN 61000-4-42 kV, Supply cable6 kV10 V/m at 0.8 - 1.0 GHz (according to IEC EN 61000-4-3)1 V/m at 2.0 - 2.7 GHz (according to IEC EN 61000-4-3)3 V/m at 1.4 - 2 GHz (according to IEC EN 61000-4-3)10 V (according to IEC/EN 61000-4-6)Class B (EN 61000-6-3)According to IEC/EN 61000-4-5, power pulses (Surge), EMC 0.5 kV, Supply cables, symmetrical, EASY…DC, power pulses (Surge), EMC1 kV, Supply cables, asymmetrical, power pulses (Surge), EMC20 ms≤ 10 ms, Bridging voltage dips 0.2 - 2.5 mm² (22 - 12 AWG), flexible with ferrule 0.2 - 4 mm² (AWG 22 - 12), solid3.5 x 0.8 mm, Terminal screw0.6 Nm, Screw terminals3.4 W (at 24 V DC)12.5 A (for 6 ms)1 W1 W24 V DC (-15 %/+ 20 % - power supply)20.4 - 28.8 V DC0 VACMounting position Shock resistance Vibration resistance Ambient operating temperature - max Ambient storage temperature - min Ambient storage temperature - max Environmental conditionsRelative humidityAir dischargeBurst impulseContact dischargeElectromagnetic fieldsImmunity to line-conducted interference Radio interference classSurge ratingVoltage dips Terminal capacityScrewdriver sizeTightening torqueHeat dissipationInrush currentPower consumptionPower lossRated operational voltage Supply voltage at AC, 50 Hz - min0 VAC20.4 VDC28.8 VDC≥ 1A (T), Fuse, Power supplyScrew terminal≤ 30 m, unscreened, Analog inputs temperature resistance Pt100 or Ni1000 sensors Input type resistance sensor: Platinum sensor Pt100 (according to DIN EN 60751, IEC 751)Input type resistance sensor: Nickel sensor Ni1000 (according to DIN 43760)40 mA4NoneBetween Analog inputs PT100 or Ni1000 and Power supply: no Between Analog inputs PT100 or Ni1000 and expansion units: yesBetween Analog inputs PT100 or Ni1000 and Inputs: noYes, for supply voltage (Siemens MPI optional)0 W 0 W 0 W 0 ASupply voltage at AC, 50 Hz - maxSupply voltage at DC - minSupply voltage at DC - maxShort-circuit protectionConnection typeCable length InputInput currentNumber of inputs (analog)Number of inputs (digital)Number of outputs (analog)Number of outputs (digital)Explosion safety category for gas Potential isolationProtection against polarity reversal Equipment heat dissipation, current-dependent PvidHeat dissipation capacity PdissHeat dissipation per pole, current-dependent PvidRated operational current for specified heat dissipation (In) Static heat dissipation, non-current-dependent PvsNone1 WMeets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Explosion safety category for dust 10.2.2 Corrosion resistance10.2.3.1 Verification of thermal stability of enclosures 10.2.3.2 Verification of resistance of insulating materials to normal heat10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects10.2.4 Resistance to ultra-violet (UV) radiation 10.2.5 Lifting10.2.6 Mechanical impact10.2.7 Inscriptions10.3 Degree of protection of assemblies 10.4 Clearances and creepage distances 10.5 Protection against electric shock10.6 Incorporation of switching devices and components 10.7 Internal electrical circuits and connections 10.8 Connections for external conductors 10.9.2 Power-frequency electric strength 10.9.3 Impulse withstand voltageEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Tous droits réservés.Eaton is a registered trademark.All other trademarks are property of their respective owners./socialmediaIs the panel builder's responsibility.The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Is the panel builder's responsibility.Is the panel builder's responsibility.The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.DA-CE-ETN.EASY-E4-DC-4PE1DA-MN-h1430de MZ049014EN Video easy E4 control relay IL050021ZU DA-CS-dc_4pe1DA-CD-dc_4pe1TT-197224_EASY-E4-DC-4PE1-de_DE eaton-modular-plc-easy-i-o-expansion-dimensions-002.eps eaton-modular-plc-easy-i-o-expansion-3d-drawing-002.eps10.9.4 Testing of enclosures made of insulating material 10.10 Temperature rise10.11 Short-circuit rating10.12 Electromagnetic compatibility 10.13 Mechanical functioneCAD modelGuide utilisateur Installation videosInstructions d'installationmCAD model Notes de venteSchémas。
摩斯阿电子V2616系列嵌入式计算机介绍说明书
IntroductionV2616 Series embedded computers are based on the Intel Core 2 Duo x86 processor, and feature 2 RS-232/422/485 serial ports, dual LAN ports, and 3 USB 2.0 hosts. V2616 computers also provide VGA and DVI-I outputs, and are also compliant with a portion of EN 50155 specifications, covering operating temperature, power input voltage, power surges, ESD, and vibration, making them particularly well-suited for railway and industrial applications.The V2616's CompactFlash socket and internal SATA II storage tray provide these computers with the reliability needed for industrialapplications that require data buffering and storage expansion. Most importantly, the V2616 computers come with 2 removable slots for inserting additional storage media, such as hard disks or SSD drives, and can offer RAID 0 and RAID 1 functions for data reliability.The V2616 series come pre-installed with Linux or WindowsEmbedded Standard 2009 to provide programmers with a familiar environment in which to develop sophisticated, bug-free application software at a low cost.AppearanceFront ViewCompactFlash (Storage, Power)Seria/LAN Serial/LANRear ViewHardware SpecificationsComputerCPU: Intel Core 2 Duo SP9300, dual core 64 bit threaded 2.26 GHz, 6 MB for L2 cacheSystem Chipset: Intel GS45 + ICH9-M FSB: 1066System Memory: 4 GB capacity, 2 GB pre-installed: 2 slots of 2 GB DDR3-1066 200 pin SO-DIMM SDRAMUSB: 3 USB 2.0 compliant hosts; 2 with type A connectors supporting system bootup, 1 with M12 connectorOS (pre-installed): Linux, or Windows Embedded Standard 2009StorageBuilt-in: 2 GB onboard industrial CompactFlash card, for root file systemStorage Device Support:• 2 removable drive trays, for 2.5” SSD or HDD• (Optional) Internal SATA II drive slot, for 2.5” SSD or HDDOther PeripheralsKB/MS: 1 PS/2 interface supporting standard PS/2 keyboard and mouse through Y-type cable Audio: Line-in, line-out interfaceDisplayGraphics Controller: Intel GS45 integrated graphics engine DVI Interface: DVI-D connector (chrontel CH7307 SDVO to DVI transmitter), up to 1600 x 1200 resolutionVGA Interface: DB15 female connector, up to 2048 x 1536 resolutionEthernet Interface LAN: 2 auto-sensing 10/100/1000 Mbps ports (M12)Serial InterfaceSerial Standards: 2 software-selectable RS-232/422/485 ports* (DB9 male)Optical Isolation Protection: 2 kV ESD Protection: 4 kV for all signalsMagnetic Isolation Protection: 1.5 kV built-inSerial Communication ParametersData Bits: 5, 6, 7, 8Stop Bits: 1, 1.5, 2Parity: None, Even, Odd, Space, MarkFlow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485Baudrate: 50 bps to 921.6 kbps (non-standard baudrates supported; see user’s manual for details)Serial SignalsRS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND RS-422: TxDA(-), TxDB(+), RxDB(+), RxDA(-), GND RS-485-4w: TxDA(-), TxDB(+), RxDB(+), RxDA(-), GND RS-485-2w: DataA(-), DataB(+), GNDDigital InputInput Channels: 6, source type Input Voltage: 0 to 30 VDC at 25 Hz Digital Input Levels for Dry Contacts: • Logic level 0: Close to GND • Logic level 1: OpenDigital Input Levels for Wet Contacts: • Logic level 0: +3 V max.• Logic level 1: +10 V to +30 V (Source to DI)Isolation: 3 kV optical isolationDigital OutputOutput Channels: 2, sink typeOutput Current: Max. 200 mA per channelOn-state Voltage: 24 VDC nominal, open collector to 30 VDC Connector Type: 10-pin screw terminal block (6 DI points, 2 DO points, DI Source, GND)Isolation: 3 kV optical isolationLEDsSystem: Power x 1, Storage x 1LAN: 100M/Link x 2, 1000M/Link x 2Serial: TX x 2, RX x 2Physical CharacteristicsHousing: Aluminum Weight: 5 kg Dimensions:Without ears: 287 x 250 x 101 mm (11.29 x 9.84 x 3.97 in) With ears: 287 x 290 x 101 mm (11.29 x 11.41 x 3.97 in)Mounting: wallEnvironmental LimitsOperating Temperature: (with SSD installed) -25 to 55°C (-13 to 140°F)Storage Temperature: (with SSD installed) -30 to 60°C (-40 to 185°F)DVI-D OutputAudio Input OutputLAN Port x 2 (M12)Host (M12)Pin Assignment (Reserved for RF SMA type)Serial Port x 2(RS-232/422/485)Ambient Relative Humidity: 5 to 95% (non-condensing)Anti-vibration: EN 50155 standardAnti-shock: EN 50155 standardConformal Coating: Available on requestPower RequirementsInput Voltage: 24 VDC (9 to 36 V), M12 connectorNote: 24 VDC is EN 50155 compliantPower Consumption: 50 W• 2 A @ 24 VDCPower Button: On/off (front panel)Standards and CertificationsSafety: UL 60950-1, CSA C22.2 No. 60950-1-07, EN 60950-1 EMC: EN 55022 Class A, EN 61000-3-2 Class D, EN 61000-3-3, EN 55024, FCC Part 15 Subpart B Class A Green Product: RoHS, CRoHS, WEEERail Traffic: EN 50155*, EN 50121-2-3, EN 50121-4, IEC 61373*Complies with a portion of EN 50155 specifications. Please contact Moxa or a Moxa distributor for details.ReliabilityAutomatic Reboot Trigger: Built-in WDT (watchdog timer) supporting 1-255 level time interval system reset, software programmable WarrantyWarranty Period: 3 yearsDetails: See /warrantyNote: These hardware specifications describe the embedded computer unit itself, but not its official accessories. In particular, the wide temperature specification does not apply to accessories such as power adapters and cables.Software SpecificationsLinuxOS: Debian Linux 5.0, “Lenny”, kernel 2.6.32File System: EXT2/EXT3Internet Protocol Suite: TCP, UDP, IPv4, SNMPv1/v2c/v3, ICMP, ARP, HTTP, CHAP, PAP, SSH 1.0/2.0, SSL, DHCP, NTP, NFS, Telnet, FTP, TFTP, PPP, PPPoEInternet Security: OpenVPN, iptables firewallWeb Server (Apache): Allows you to create and manage web sites; supports PHP and XMLTerminal Server (SSH): Provides secure encrypted communications between two un-trusted hosts over an insecure networkDial-up Networking: PPP (Linux) allows machines to connect to the Internet through dialup lines as either PPP server or client. Works with ‘chat’, ‘dip’, and ‘diald’, among (many) others. Supports IP, TCP, UDP, and Novell IPX.File Server: Enables remote clients to access files and other resources over the networkWatchdog: Features a hardware function to trigger system reset in a user specified time interval (Moxa API provided)Application Development Software:• Moxa API library (Watchdog timer, Moxa serial I/O control, Moxa DI/ DO API)• GNU C/C++ compiler• GNU C library• PerlWindows XP EmbeddedOS: Windows Embedded Standard 2009 SP3File System: NTFSInternet Protocol Suite: DHCP, DNS, FTP, HTTP, SNTP, NTP, Telnet, SMTP, SNMPv2, TCP, UDP, IPv4, ICMP, IGMP, IPsec, TAPI, ICS, PPP, CHAP, EAP, PPPoE, PPTP, NetBIOSWeb Server (IIS): Allows users to create and manage websitesRemote Desktop: The Terminal Server Remote Desktop component provides remote access for the desktop of a computer running Terminal ServicesRemote Registry Service: Enables remote users to modify registry settings on this computerWatchdog: Features a hardware function to trigger system reset in a user specified time interval (Moxa API provided)Enhanced Write Filter: Redirect disk write operations to volatile (RAM) or non-volatile (disk) storageFile-based Write Filter: The File Based Write Filter (FBWF) component redirects all write requests directed at protected volumes to the overlay cache, which records and displays the changes while preserving the protected status of the target volume.Application Development Software: • Moxa API library• Microsoft .NET 3.5, with SP1• Active Directory Service Interface (ADSI) Core • Common control libraries • Common file dialogs• Direct3D, DirectPlay, DirectShow, and Direct show filters • Mapi32 libraries• Message Queuing (MSMQ) Core• Microsoft Visual C++ run time libraries • Power management dynamic-link library • RPC• Windows API, script engines, and WMISilverlight 4: A free runtime framework that powers rich application experiences and delivers high quality, interactive video across multiple platforms and browsers, using the .NET frameworkOrdering InformationPackage Checklist• V2616 embedded computer • Wall mounting Kit• PS2 to KB/MS Y-type cable• Documentation and software CD or DVD • Quick installation guide (printed)•Warranty cardAvailable ModelsV2616-XPE: x86 Embedded computer with Intel Core 2 Duo, VGA, DVI, 2 LANs, 2 Serial Ports, 6 DIs, 2 DOs, 3 USB 2.0 Ports, 24 VDC Power ,Windows XPE, -25 to 55°C operating temperature (EN 50155 Class T1)V2616-LX: x86 Embedded computer with Intel Core 2 Duo, VGA, DVI, 2 LANs, 2 Serial Ports, 6 DIs, 2 DOs, 3 USB 2.0 Ports, 24 VDC Power, Linux, -25 to 55°C operating temperature (EN 50155 Class T1)Note: Conformal Coating is available on request.Optional Accessories (can be purchased separately)PWR-24250-DT-S1: Power adapterPWC-C7US-2B-183: Power cord with 2-pin connector, USA plug PWC-C7EU-2B-183: Power cord with 2-pin connector, Euro plug PWC-C7UK-2B-183: Power cord with 2-pin connector, British plug PWC-C7AU-2B-183: Power cord with 2-pin connector, Australia plug PWC-C7CN-2B-183: Power cord with 2-pin connector, China plug DK-DC50131-01: DIN rail mounting kitM12 Connectors (can be purchased separately)M12A-5P-IP68: Field-installation A-coded screw-in power connector, 5-pin female M12 connector, IP68-rated M12A-5PMM-IP68: D-coded screw-in USB connector, 5-pin male M12 connector, IP68-ratedM12A-8PMM-IP68: Field-installation A-coded screw-in Gigabit Ethernet connector, 8-pin female M12 connector, IP68-ratedM12 Cables (can be purchased separately)CBL-M12(FF5P)/Open-100 IP67: 1-meter A-coded M12-to-5-pin power cable, 5-pin female M12 connector, IP67-ratedCBL-M12MM8PRJ45-BK-100-IP67: 1-meter A-coded M12-to-RJ45 Cat-5E UTP Gigabit Ethernet cable, 8-pin male M12 connector, IP67-rated。
计算机组装与维修课件06
娱乐用的显卡，一般称为“3D显卡”，就是个 人计算机中使用的显卡。规格与功能设计都面向3D 游戏、中低端的3D绘图与影像处理等应用。3D显卡 也有从低端到高端的等级之分。根据款式新旧、性 能高低等，价格有很大差异，从一、两百元到数千 元不等。
6-2 独立显卡的等级与类型
6-2-2 3D显卡
全国中等职业学校计算机类通用教材
Chapter 06 显 卡
本课件的文字及图片版权 均为南京凤凰康轩所有
本章学习重点
6-1 显卡安装的位置 6-2 独立显卡的等级与类型 6-3 显卡的外观和技术名词 6-4 显卡的功能与技术 6-5 显卡市场主流ATI＆NVIDIA
6-1 显卡安装的位置
3D显卡目前有两种提供方式，一种是直接 集成在主板上，提供显示功能；另一种是插卡 在主板上。
6-4 显卡的功能与技术
6-4-1 显卡串接技术
SLI，英文为Scalable Link Interface，是NVIDIA公司 所推出的显卡串接技术，可以将两块或多块相同等级的 显卡串接来，每块显卡分别运算画面一部分，再合成一 幅完整的图像，速度比一块显卡快了许多。SLI技术已 经推出四五年，深受消费者喜爱，有逐渐普及的趋势。 SLI对ATI的显卡来说是个很大的威胁，因此ATI于 2006年正式推出“CrossFire”显卡串接技术，只要使用 支持CrossFire的主卡与副卡，搭配支持CrossFire的主板 就可以使用。
6-4-7 CUDA
CUDA是用于GPU计算的开发环境，它是一个全新的软硬件架构，可以 将GPU视为一个并行数据计算的设备，对所进行的计算进行分配和管理。 由于GPU的特点是处理密集型数据和并行数据计算，因此CUDA非常适 合需要大规模并行计算的领域。可广泛应用在图形动画、科学计算、地质、 生物、物理模拟等领域。
UL 62 Flexible cables (cords)介绍
UL62 Flexible Cords and Cable
• 4.1.1.6 Separator隔离层: • 4.1.1.6.1如果导体既没有镀层又不能符合5.2.8的导体腐蚀 性测试,则导休必须包裹有隔离层. • 4.1.1.6.3隔离层不需要完全地包裹住导体,除非它必须以此 来符合5.2.8的导体腐蚀性测试要求). • 隔离层应该由以下形式组成: • a)优质的纤维纱线、纸、玻璃纸或聚酯带子螺旋缠绕; • b)优质的纤维纱线编织; • c)纸、玻璃纸或聚酯带子纵向包裹
UL62 Flexible Cords and Cable
• • • • • • 2 定义: Breather tube:用于平衡压力的管 Bunch strands:束绞 Direction of lay:绞合方向 Elevator traveling cable 电梯电缆 Extra-hard-usage cord超高强度电线:使用于很沉 重的设备和手握式器具和工具,具有最高等级的机 械强度. （SOW,STW,STO,STOW,SEOW.绝缘及 外被较厚） • Grounding conductor 接地导体. • hard-usage cord高强度电线:使用于较沉重的设备 和手握式器具和工具,具有较高等级的机械强度. (SJT,SJE,SJTW,SJTOW.带J的一般属于此类)
UL62 Flexible Cords and Cable
• Heater cord耐热电线 (HPN) • Hoistway cable起重机电线 • Not-for-hard-usage cord一般使用于灯具产品上, 具有较低级别的机械强度 (SVT,SPT,NISPT等) • Rope-lay-stranded conductor绳绞 • Thermoplastic热朔性 • Thermoplastic elastomer TPE • Thermoset热固性 • Tinsel cord铜薄丝
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Its ultra low line capacitance secures a high level of signal integrity without compromising in protecting sensitive chips against the most stringently characterized ESD strikes.
backwards compatible with USB1.1 low and full speed ■ Ethernet port: 10/100/1000 Mb/s ■ SIM card protection ■ Video line protection
Description
The DVIULC6-2x6 is a monolithic, application specific discrete device dedicated to ESD protection of high speed interfaces, such as DVI, IEEE 1394a, b and c, USB2.0, Ethernet links and video lines.
CEC SCL Vcc 5V SDA HPD
TC-
1
6
2
5
TC+
3
4
TMDS links
DVIULC6-4SC6
Control links
Figure 13. T1/E1/Ethernet protection
Display
1
6
Rx0-
(flat panel,
2
5
monitor,
3
4
Rx0+
projector)
ΔCi/o-GND
Capacitance variation between I/O and GND
VR = 0 V, F= 825 MHz VR = 0 V, F= 1 MHz
Ci/o-i/o Capacitance between I/O
VR = 0 V, F= 825 MHz
0.5 µA V
12 V
Electrical characteristics (Tamb = 25 °C)
Parameter
Test Min. Typ. Max
IRM Leakage current
VRM = 5 V
VBR
Breakdown voltage between VBUS and GND
May 2008
Rev 1
1/17
元器件交易网
Characteristics
1
Characteristics
Figure 1. Functional diagram
DVIULC6-2x6
I/O1 1
6 I/O1 I/O1 1
6 I/O1
GND 2 I/O2 3
2
- 12.00
- 16.00 300.0k
F(Hz)
1.0M
3.0M
Ligne 2
10.0M
30.0M
100.0M 300.0M
1.0G
3.0G
Tj(°C)
1
25
50
75
100
125
3/17
元器件交易网
Characteristics
Figure 8.
Eye diagram at 1.65 Gbps amplitude 500 mV PCB + DVIULC6-2M6
C I/O – I/O
1000
10000
S21(db)
0.00
- 4.00
Fc=5.9GHz
- 8.00
- 12.00
- 16.00 300.0k
F(Hz)
1.0M
3.0M
10.0M
30.0M
100.0M 300.0M
1.0G
3.0G
Figure 6. Frequency response (typical values) DVIULC6-2P6
■ Low PCB space consumption - 1.45 mm2 for µQFN
■ Low leakage current for longer operation of battery powered devices
■ Higher reliability offered by monolithic integration
±25
Tstg Storage temperature range Tj Maximum junction temperature TL Lead solder temperature (10 seconds duration)
-55 to +150
°C
125
°C
260
°C
Table 2. Symbol
Benefits
■ ESD standards compliance guaranteed at device level, hence greater immunity at system level
■ ESD protection of VBUS when applicable. ■ Large bandwidth to minimize impact on data
17 V
0.85 pF
0.02
pF
0.5 pF
2/17
元器件交易网
DVIULC6-2x6
Characteristics
Figure 2. Line capacitance versus line voltage (typical values)
Figure 3. Line capacitance versus frequency (typical values) DVIULC6-2M6
5 VBUS GND 2 4 I/O2 I/O2 3
5 VBUS 4 I/O2
µQFN 6 leads
SOT666
When used with a DVI application, Pin 5 should not be connected to protect against backdrive current flow on data lines.
IR = 1 mA
6
VCL Clamping voltage
IPP = 1 A, tp = 8/20 µs Any I/O pin to GND
IPP = 5 A, tp = 8/20 µs Any I/O pin to GND
Ci/o-GND Capacitance between I/O and GND
■ 500 µm pitch for µQFN 6 leads
Complies with these standards
■ IEC 61000-4-2 level 4 – 15 kV air discharge – 8 kV contact discharge
■ MIL STD883G-Method 3015-7
Table 1. Symbol
Absolute ratings Parameter
Value
Unit
VPP Peak pulse voltage
IEC61000-4-2 air discharge
±15
IEC61000-4-2 contact discharge
±15
kV
MIL STD883G-Method 3015-7
C(pF)
1.0
F=825MHz
0.9
Vosc=500mVRMS
0.8
VBUS OPEN Tj =25 °C
0.7
0.6
0.5
CI/O - GND
0.4
0.3
0.2
0.1
Data line voltage (v)
0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
C(pF)
1.0 0.9
(typical values) DVIULC6-2P6
values) DVIULC6-2M6
C(pF)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
1
10
F(MHz)
100
Vosc =30mVrms Tj = 25 °C
VI-O/GND = 0V VBUS OPEN
C I/O - GND
Horizontal: 50 ps/div Vertical: 200 mV/div
4/17
元器件交易网
DVIULC6-2x6
2
Application examples
Application examples
Figure 12. DVI single link application
Figure 10. Eye diagram at 1.65 Gbps amplitude 500 mV PCB + DVIULC6-2P6
Horizontal: 100 ps/div Vertical: 200 mV/div