威来惠南助剂(Chinese)手册

合集下载

Alligare MSM 60 产品说明说明书

SAFETY DATA SHEETEMERGENCY CALL: 1-800-424-9300 (CHEMTREC)1. IDENTIFICATIONPRODUCT NAME: Alligare MSM 60DESCRIPTION: A dispersible granule herbicide.EPA Reg. No.: 81927-7COMPANY IDENTIFICATION:Alligare, LLC13 N. 8th StreetOpelika, AL 368012. HAZARD IDENTIFICATIONWARNINGMay be harmful in contact with skin (H313)Very toxic to aquatic life with long lasting effects (H400+H410)HAZARD CLASSIFICATIONHealth Hazard Category Physical Hazards Category Acute Toxicity, Dermal 5 None -Environmental Hazards CategoryHazardous to the aquatic environment, short-term 1Hazardous to the aquatic environment, long-term 1 HAZARDS NOT REQUIRING CLASSIFICATIONNone.PRECAUTIONARY STATEMENTSAvoid release to the environment not in accordance with the product label. (H273)IF ON SKIN: Call a Poison Control Center of doctor if you feel unwell. (P302+P312)Collect spillage.(H391)Dispose of contents / container in accordance with local regulations. Refer to the product label for specific disposal instructions. (P501)3. COMPOSITION / INFORMATION ON INGREDIENTSCommon Name Chemical Name CAS # CompositionMetsulfuron-methyl Methyl 2-[[[[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)amino]-carbonyl]amino]sulfonyl]benzoate 74223-64-6 60.0%4. FIRST AID MEASURESHave the product container or label with you when calling a poison control center or doctor or going for treatment. You may also contact 1-800-424-9300 for emergency medical treatment information.IF ON SKIN OR CLOTHING: Call a doctor or poison control center if you feel unwell.Flash point: N/AFlammable Limits (LFL-UFL): N/AFire and Explosion Hazards: None known.Means of Extinction: Use water spray, CO2, foam or dry chemical.Fire Fighting Instructions: Evacuate area. If area is exposed to fire and conditions permit, allow fire to burn itself out. Dike runoff and do not allow runoff to enter sewers, storm drains or waterways. Thoroughly decontaminate firefighting equipment after use.Firefighting Equipment: Self-contained breathing apparatus with full face piece and full bunker gear. Hazardous Combustion Products: May produce irritating / toxic gasses and vapors.NFPA Ratings: Health: 1 / Flammability: 1 / Instability: 0Clean up spills immediately observing the precautions in Section 8 of this SDS. Isolate the hazard area and keep unnecessary and unprotected personnel from entering. Prevent material from contaminating soil or from entering sewage and drainage systems and bodies of water.Small Spills: Scoop up material and place in a container for reuse or disposal. Clean contaminated floors and objects thoroughly with water, observing all environmental regulations.Large Spills: Avoid creating a dust cloud and take all possible measures to reduce airborne dust. Vacuum, shovel or sweep up material and place in a container for reuse or disposal. After removal, flush contaminated area thoroughly with water, observing all environmental regulations.Handling: Do not allow to come into contact with skin, eyes and clothing. Avoid breathing vapors or mist. AVOID breathing dust. Remove and wash contaminated clothing before reuse. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. Storage: Store in a cool, dry place and in such a manner as to prevent cross contamination with other pesticides, fertilizers, food, and feed. Store in original container and out of the reach of children, preferably in a secured storage area. Keep away from heat, sparks or flames.Engineering Controls:Facilities storing or utilizing this material should be equipped with adequate ventilation, an eyewash station and a safety shower.Protective Clothing: Long-sleeved shirt, long pants, shoes plus socks, and chemical-resistant gloves made out of any waterproof material.General: Wash thoroughly with soap and water after handling. Discard clothing and other absorbent materials that have been heavily contaminated with this product; do not reuse them. Follow the manufacturer’s instructions for cleaning and maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.Appearance: light brown granule Odor:slightMelting/freezing point:not available Boiling point/Boiling range:not available Flammability:not available Flammability limits (upper/lower):not available Flash point:not availableAuto-ignition temperature:not available Decomposition temperature:not available pH:not available Kinematic viscosity:not available Solubility:in water, dispersible Partition coefficient:not available Vapor pressure:not available Density:0.64-0.74 g/ml Relative vapor density:not available Particle characteristics:not availableCONDITIONS TO AVOID: None known.CHEMICAL STABILITY: Stable under normal use and transportation conditions.HAZARDOUS DECOMPOSITION PRODUCTS: Data not available.INCOMPATIBILITY WITH OTHER MATERIALS: None known.HAZARDOUS REACTIONS: None known.HAZARDOUS POLYMERIZATION: Will not occur.ORAL TOXICITY (rat LD50): 5,000 mg/kgDERMAL TOXICITY (rat LD50): > 2,000 mg/kgINHALATION TOXICITY (rat LC50): > 5.3 mg/L (4-hour)EYE IRRITATION: Slightly irritatingSKIN IRRITATION: None to slightly irritatingSKIN SENSITIZATION: Not a contact sensitizerCARCINOGENICITY:EPA:Not ListedACGIH: Not Listed NTP:Not ListedIARC:Not Listed OSHA: Not ListedMUTAGENIC TOXICITY: Metsulfuron-methyl produced genetic damage in a mammalian cell culture test. However, other tests in animals and in bacterial and mammalian cell cultures did not produce genetic damage. Therefore, the weight of the evidence suggests that metsulfuron-methyl does not cause genetic damage.REPRODUCTIVE TOXICITY: No evidence in animal studies.This herbicide is injurious to plants at extremely low concentrations. Non-target plants may be adversely affected from drift and run-off. This product is very toxic to aquatic life with long lasting effects.Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment wash water.Do not contaminate water, food or feed by disposal.PESTICIDE DISPOSAL: Pesticide wastes are toxic. Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.CONTAINER DISPOSAL: Nonrefillable container. Do not reuse or refill this container. Refer to the product label for specific container handling instructions.UN Number: UN3077Proper Shipping Name: Environmentally hazardous substance, solid, N.O.S. (containsmetsulfuron-methyl)Transport Hazard Class: 9Packing Group: IIIHazard Zone: AMarine Pollutant: Yes1Hazardous Substance RQ: NoneLabels / Placards: US-DOT: Class 9 Environmentally Hazardous Substance2IMDG, IATA: Class 9 Environmentally Hazardous Substance3 Emergency Guide: 171 (NAERG – North American Emergency Response Guide)1 Marine pollutant note:Ground-only shipments are excluded from Marine Pollutant labelingrequires as per 49CFR172.101 Appendix B(4). For any shipmentsinvolving all or part of the transport by vessel, the shipment must beclassified as a Marine Pollutant unless a limited quantity exemptionapplies (see note 3 below).2 US-DOT Note: Not regulated for “ground only” shipments.3 IMDG / IATA Note: Not regulated when shipped in single or inner packaging ≤1.32 gal. (5 L). This information is not intended to convey all specific regulatory or operational requirements/information relating to this product. Transportation classifications may vary by container volume and may be influenced by regional or country variations in regulations. Additional transportation system information can be obtained through an authorized sales or customer service representative. It is the responsibility of the transporting organization to follow all applicable laws, regulations and rules relating to the transportation of the material.FIFRA –This chemical is a pesticide product registered by the Environmental Protection Agency and is subject to certain labeling requirements under federal pesticide law. These requirements differ from the classification criteria and hazard information required for safety data sheets, and for workplace labels of non-pesticide chemicals. The following is the hazard information as required on the pesticide label: PRECAUTIONARY STATEMENTSHAZARDS TO HUMANS AND DOMESTIC ANIMALSCAUTION: Causes moderate eye irritation. Harmful if absorbed through the skin. Avoid contactwith skin, eyes or clothing.See inside label booklet for additional Precautionary Statements and Directions for Useincluding Storage and Disposal instructions.ENVIRONMENTAL HAZARDSDo not apply directly to water, or to areas where surface water is present, or to intertidal areasbelow the mean high water mark. Do not contaminate water when cleaning equipment ordisposing of equipment washwaters.This herbicide is injurious to plants are extremely low concentrations. Nontarget plants may beadversely affected from drift and run-off.All pesticides are governed under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA). The regulatory information presented below is pertinent only when this product is handled outside of the normal use and application as a pesticide. This product is excluded from listing requirements under EPA/TSCA. SARA Title III – Section 302 Extremely Hazardous SubstancesNot listedSARA Title III – Section 311/312 Hazard CategoriesImmediateSARA Title III – Section 312 Threshold Planning QuantityN/ASARA Title III – Section 313 Reportable IngredientsNoneCERCLA –Not listedCALIFORNIA PROP 65 STATUS –This product does not contain any chemical known to the state of California to cause cancer or reproductive toxicity.CANADA –This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the SDS contains all of the information required by CPR.THIS INFORMATION IN THIS SDS IS BASED ON DATA AVAILABLE AS OF THE REVISION DATE GIVEN HEREIN, AND BELIEVED TO BE CORRECT. CONTACT ALLIGARE, LLC TO CONFIRM IF YOU HAVE THE MOST CURRENT MSDS. JUDGMENTS AS TO THE SUITABILITY OF THE INFORMATION HEREIN FOR TH E INDIVIDUAL’S OWN USE OR PURPOSES IS NECESSARILY THE INDIVIDUAL’S OWN RESPONSIBILITY. ALTHOUGH REASONABLE CARE HAS BEEN TAKEN IN THE PREPARATION OF SUCH INFORMATION, ALLIGARE, LLC EXTENDS NO WARRANTIES, MAKES NO REPRESENTATIONS, AND ASSUMES NO RESPONSIBILITY AS TO THE ACCURACY OR SUITABILITY OF SUCH INFORMATION FOR APPLICATION TO THE INDIVIDUAL’S PURPOSES OR THE CONSEQUENCES OF ITS USE.This Safety Data Sheet (SDS) serves different purposes than and DOES NOT REPLACE OR MODIFY THE EPA APPROVED PRODUCT LABELING (attached to and accompanying the product container). This SDS provides important health, safety, and environmental information for employers, employees, emergency responders and others handling large quantities of the product in activities generally other than product use, while the labeling provides that information specifically for product use in the ordinary course. SDS Version: 3.0 Effective Date: 07/01/2018。

威来惠南的农用表面活性剂介绍

威来惠南的农用表面活性剂介绍公司简介威来惠南集团（中国）有限公司于1995年在香港注册，专业代理和引进国际著名厂商的化工原材料，集团总部设在香港，在北京、上海、广州、成都、青岛、武汉、厦门都设有办事机构，在中国上海，设立专业的实验技术中心。

依靠完善的销售网络，专业化的销售队伍，使我们为客户提供优质的产品和及时可靠的服务。

公司自成立以来，已经和多家国际化工公司建立了密切的合作伙伴关系，“关注客户需求，引进先进产品”，跟客户建立合作战略伙伴关系。

农药水乳剂（EW）液体原药或将溶解于水不溶性的有机溶剂中的固体原药在表面活性剂和外力作用下，在水中形成牛奶状的水包油型乳液，水乳剂是一种热力学不稳定体系。

∙水乳剂专用助剂：TERMUL 5030是亨斯迈针对水乳剂剂型特点而精心筛选开发的阴/非离子混合型乳化剂，合理的原料组成及配比使得TERMUL 5030可以单独作为乳化剂应用于水乳剂产品。

特别是对于拟除虫菊酯农药品种的水乳剂配方，TERMUL5030作为乳化剂显示出独特的配伍性能。

∙专用乳化剂---TERMUL 200：TERMUL 200是亨斯迈开发的烷基酚嵌段聚醚共聚型乳化剂，正式由于其结构的独特性以及亲水亲油基在长链中的合理分布，使得TERMUL 200作为乳化剂与TERMUL 2507、TERMUL1284、TERMUL 1285系列乳化剂配合应用于水乳剂产品，不但表现出良好的乳化性能及长贮稳定性能，而且显示出对多种农药原药品种的普遍适应性。

专用乳化剂---TERMUL 2507、TERMUL 1284、TERMUL 1285系列：TERMUL 2507、TERMUL 1284、TERMUL 1285系列乳化剂品种是含不同EO数的蓖麻油聚氧乙烯基醚乳化剂产品，可根据不同农药原药特性进行配伍选择，从而获得配方更加合理、性能更加稳定的水乳剂产品。

EW配方应用实例：农药水悬浮剂(SC)将水不溶性固体农药有效成分在润湿剂、分散剂、增稠剂、消泡剂、稳定剂及pH调节剂等助剂的作用下，在水中经湿法粉碎而形成的稳定的分散体系。

硅烷在油漆与涂料中的应用

硅烷在油漆与涂料中的应用
曹坚林，梁照明
（威来惠南集团中国有限公司，广州 ! ） " # $ % #
摘要：介绍了硅烷在涂料中的各种最新应用，包括各种硅烷改性水性丙烯酸酯涂料、硅烷增粘底漆、硅烷溶胶&凝胶涂料及硅烷富锌底漆等。对涂料工程师在各种涂料配方中应用硅烷来提高涂料性能具有一定的借鉴作用。关键词：硅烷，涂料，溶胶&凝胶，富锌底漆，硅丙乳液
" 硅烷改性丙烯酸酯涂料
硅烷用于丙烯酸酯乳液和水性涂料的优点有：提高涂层的耐水性、耐溶剂性、耐擦洗性、耐划伤性、耐磨性、耐久性、抗老化性能、附着力和硬度。将丙烯酸酯和苯乙烯单体与硅烷共聚，可合万方数据成出硅烷改性的丙烯酸酯乳液，从而制成可室温
收稿日期：。 % # # ! & " % & . " —），男，涂料化学工程师。作者简介：曹坚林（ " / $ ：5 0&1 2 3 4 6 7 8 4 9 2 : !; : < 1 2 3 4 * 9 : 1
乙烯基三异丙氧基硅烷改性醋丙乳胶漆在室温贮存! $个月后，没有结晶或凝胶现象。 ! . " 硅烷改性丙烯酸酯乳胶添硅烷改性丙烯酸酯乳液的典型配方见表) 。
表) 硅烷改性丙烯酸酯乳液的典型配方原料名称甲基丙烯酸甲酯丙烯酸丁酯甲基丙烯酸乙烯基三异丙氧基硅烷水表面活性剂! & . ! $ ’硫酸过硫酸钾 !+过氧化氢叔丁基 " ’甲醛合次硫酸氢钠合计用量／份 " 0 " . " ! " & " . # 0 1 . # 0 1 1 . 0 0 0 # ) & . ! ) & 1 1 # . 1

Invacare 产品用户手册说明书

This manual MUST be given to the user of the product.BEFORE using this product,read this manual and save for future reference.I I1General1.1SymbolsSignal words are used in this manual and apply to hazards or unsafe practices which could result in personal injury or property damage.DANGER!–Danger indicates an imminently hazardous situation which,if not avoided,will result in death or serious injury.WARNING!–Warning indicates a potentially hazardous situation which,if not avoided,could result in death or serious injuryCAUTION!–Caution indicates apotentially hazardous situation which,if not avoided,may result in property damage or minor injury or both.Gives useful tips,recommendations and information of efficient,trouble-free use.2Safety2.1General GuidelinesDANGER!Risk Of Death,Injury Or DamageBed accessories designed by other manufacturers have NOT been tested by e of NON-Invacare bed accessories may result in injury or death.–Use ONLY Invacare rails,mattresses,bed extenders and other accessories with Invacare bed products.DANGER!Risk Of Death,Injury Or DamageImproper use of this product may cause injury or damage.–If you are unable to understand the warnings,cautions or instructions,contact a healthcare professional,dealer or technical personnel before attempting to use this equipment–Do not use this product or any available optional equipment without first completely reading and understanding these instructions and any additional instructional material such as user manuals,service manuals or instruction sheets supplied with this product or optional equipment.Continued use of the bed with damaged parts could lead to the bed malfunctioning,causing injury to the user and/or caregiver.–Check ALL bed components and carton for damage,and test components before use.In case of damage or if the bed is not working properly,contact a technician or Invacare for repair.To avoid injury or product damage–Set-up and Assembly instructions MUST be performed by qualified technicians only."Qualified Technician Only"sections are marked accordingly.WARNING!Risk Of Injury Or DamageThe Fixed Trapeze has a safe working load of 168lb.The Fixed Trapeze is designed to provide support,increase stability and assist the user when repositioning himself/herself in bed.–The trapeze is not designed to support the total body weight of an individual or to be used as an assist device when transferring into or out of a e the trapeze as a positioning device only.–The Fixed Trapeze MUST ONLY be installed onto beds with metal framed headboards.Invacare®Floor Base and Fixed TrapezeenModel Nos.7714P and 7740A User ManualInvacare®Floor Base and Fixed TrapezeDANGER!Risk Of Death or InjuryTo avoidrisk of falling or other injuries:–After ANY adjustments,repair or service and BEFORE use,make sure that allattaching component parts are secure.–DO NOT INSTALLOR ADJUST TRAPEZE OF AN OCCUPIED BED.–DO NOT attach swivel trapezes to the floor base.This may cause the floor base to tip over.–Floor Base MUST be positioned under the bed at the headboard position.–Ensure that the snap buttons fully protrude through the adjustment hole of the floor leg assembly.This ensures thatthe Floor Base is properly installed and securely locked in position.3Setup3.1Assembling the Floor Base1.Install the "A"frame A into the floor base assembly B with the snap buttons C facing the short length D of the floor base.2.Depress the snap button on one leg E of the "A"frame and slide it into the floor base assembly until anaudible “click”is heard.Make sure that the snap button fully protrudes through the adjustment hole of the floor base assembly.This ensures that the Floor Base is properly installed and securely locked in place.3.Repeat STEPS 1and 2for the opposite side.4.Attach brackets to the floor base.Refer to Attaching Brackets to Floor Base,page 2.3.2Attaching Brackets to Floor Base/Bed End Attaching Brackets to Floor Base1.Place the floor base F on a flat surface.2.Position the lower bed bracket G in the center of the bottom rail H of the floor base with the tubular hook I facing down.3.Securely tighten the wing nuts J to secure the lower bed bracket to the floor base.4.Position the upper bed bracket K in the center of the top rail of the floor base with the tubular hook facing down.5.Securely tighten the wing nuts to secure the upper bed bracket to the floor base.Attaching Brackets to the BedEndPosition the lower bed bracket G in the center of the bottombed frame L.The lower bed and upper bed brackets KMUST be positioned as close to the center of the bed aspossible without interfering with the bed drive shaft M.1.Position the lower bed bracket G in the center of the bottombed frame with the tubular hook I facing up.Make sure thatthere is no interference between the lower bed bracket and thebed drive shaft M.2.Tighten wing nuts J to secure lower bed bracket onto bottombed frame.3.Position the tubular hook of the upper bed bracket K so it restson the top rail of bed end with the tubular hook facing down.4.Securely tighten the wing nuts to secure the upper bed bracketto the top rail of the bed end.3.3Installing the TrapezeDANGER!Risk Of Death or InjuryTo avoid risk of falling or other injuries:–DO NOT INSTALL OR ADJUST TRAPEZE OF ANOCCUPIED BED.–DO NOT attach swivel trapezes to the floor base.Thismay cause the floor base to tip over.–Floor Base MUST be positioned under the bed at theheadboard position.When using the floor base F in conjunction with a bed L,the long legs of the floor base should slide under the bed.Refer to3.4"S"hook U.1.Loosen trapeze key V by turning counterclockwise.2.Slide the clamp W to desired position on the upper offset bar P.3.Secure the trapeze clamp to the offset bar by turning the keyclockwise.3.5Storing the FloorBase1.Remove the trapeze from the floor base.2.Depress one snap button X on floor leg assembly and lift up on the "A"frame Y until the snap button clears the top of the floor leg assembly.3.Rotate one leg of the floor base assembly 270°clockwise away from the other leg.4.Rotate the remaining leg of the floor base assembly 90°clockwise towards the other leg.4Warranty4.1WarrantyPLEASE NOTE:THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4,1975.This warranty is extended only to the original purchaser/user of our products.This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state.Invacare warrants its product to be free from defects in materials and workmanship for a period of one year of the product for the original purchaser.If within such warranty period any such product shall be proven to be defective,such product shall be repaired or replaced,at Invacare's option.This warranty does not include any labor or shipping charges incurred in replacement part installation or repair of any such product.Invacare's sole obligation and your exclusive remedy under this warranty shall be limited to such repair and/or replacement.For warranty service,please contact the dealer from whom you purchased your Invacare product.In the event you do not receive satisfactory warranty service,please write directly to Invacare at the address on the back cover.Provide dealer's name,address,model number,and the date of purchase,indicate nature of the defect and,if the product is serialized,indicate the serial number.Invacare corporation will issue a return authorization.the defective unit or parts must be returned for warranty inspection using the serial number,when applicable,as identification within thirty (30)days of return authorization date.DO NOT return products to our factory without our prior consent.c.o.d.shipments will be refused;please prepay shipping charges.LIMITATIONS AND EXCLUSIONS:THE WARRANTY SHALL NOT APPLY TO PROBLEMS ARISING FROM NORMAL WEAR OR FAILURE TO ADHERE TO THE ENCLOSED INSTRUCTIONS.IN ADDITION,THE FOREGOING WARRANTY SHALL NOT APPLY TO SERIAL NUMBERED PRODUCTS IF THE SERIAL NUMBER HAS BEEN REMOVED OR DEFACED;PRODUCTS SUBJECTED TO NEGLIGENCE,ACCIDENT,IMPROPER OPERATION,MAINTENANCE OR STORAGE;OR PRODUCTS MODIFIED WITHOUT INVACARE'S EXPRESS WRITTEN CONSENT INCLUDING,BUT NOT LIMITED TO:MODIFICATION THROUGH THE USE OF UNAUTHORIZED PARTS OR ATTACHMENTS:PRODUCTS DAMAGED BY REASON OF REPAIRS MADE TO ANY COMPONENT WITHOUT THE SPECIFIC CONSENT OF INVACARE;PRODUCTS DAMAGED BY CIRCUMSTANCES BEYOND INVACARE'S CONTROL;PRODUCTS REPAIRED BY ANYONE OTHER THAN AN INVACARE DEALER,SUCH EVALUATION SHALL BE SOLELY DETERMINED BY INVACARE.THE FOREGOING EXPRESS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES WHATSOEVER,WHETHER EXPRESS OR IMPLIED,INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND THE SOLE REMEDY FOR VIOLATIONS OF ANY WARRANTY WHATSOEVER,SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT PURSUANT TO THE TERMS CONTAINED HEREIN.THE APPLICATION OF ANY IMPLIED WARRANTY WHATSOEVER SHALL NOT EXTEND BEYOND THE DURATION OF THE EXPRESS WARRANTY PROVIDED HEREIN.INVACARE SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.THIS WARRANTY SHALL BE EXTENDED TO COMPLY WITH STATE/PROVINCIAL LAWS AND REQUIREMENTS.Invacare USACanadaOne Invacare Way 570Matheson Blvd E.Unit 8Elyria,Ohio USA Mississauga,Ontario 44036–2125L4Z 4G4800–333–6900800–668–5324©2014Invacare Corporation All rights reserved.Republication,duplication ormodification in whole or in part is prohibited without prior written permission from Invacare.Trademarks are identified by ™and ®.All trademarks are owned by or licensed toInvacare Corporation or its subsidiaries unless otherwise noted.1180736-B-012014-11-03*1180736B-01*Making Life’s Experiences Possible™。

Invacare Reliant Scale RLS6 产品说明书

Part No 11148321Reliant Scale RLS6For more information regarding Invacare products, parts, and services, please visit Reliant Scale RLS6NOTE: Check all parts for shipping damage. In case of shipping damage, DO NOT use. Contact carrier/dealer for further instruction.To ensure the safe installation, operation and use of the Reliant Scale, these instructions MUST be followed:ƽ WARNINGDO NOT use this product without first completely reading and understanding these instructions and any additional instructional material such as owner’s manuals, service manuals or instruction sheets supplied with this product or optional equipment. If you are unable to understand the warnings, cautions or instructions, contact a healthcare professional, dealer or technical personnel before attempting to use this equipment - otherwise, injury or damage may occur.After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur.ƽ ACCESSORIES WARNINGInvacare products are specifically designed and manufactured for use in conjunction with Invac-are accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.Kit DescriptionSpecificationsSAVE THESE INSTRUCTIONSPART NODESCRIPTION QTY 1117147Load Cell Assembly 11064338Nylon Washers 21080975Swivel Bar Pin 11008882Locknut 11092593Mounting Screw 11065214Small Steel Washer111195561/8-inch thick nylon washer (9805 lift)211195551/4-inch thick nylon washer (450/600 lbs lift)2WEIGHT RANGE:Up to 600 lbs (272.7 kg)RESOLUTION:+/- 0.2 lbs (.1 kg)DISPLAY:Liquid Crystal Digital AUTOMATIC POWER DOWN Two minutesSIZE:5-3/4 L x 3-5/8 W x 4 H WEIGHT: 1.55 lbsPOWER:Nine volt alkaline battery (Included)BATTERY LIFE:Approximately 1500 readings TEMPERATURE RANGE:50° to 104° F (10° to 40° C)Remove the Swivel Barƽ WARNINGInvacare slings and patient lift accessories are specifically designed to be used in conjunction with Invacare patient lifts. Slings and accessories designed by other manufacturers are not to be uti-lized as a component of Invacare’s lift system.NOTE: For this procedure, refer to FIGURE1.NOTE: The Reliant Scale cannot be used in conjunction with the swivel bar supplied with the Invacare 9805 Lift. The Reliant Swivel Bar (Part No. 1064518) MUST be purchased and installed on the Invacare 9805 lift in order to install the Reliant Scale.1.Perform one of the following:•For 450 lbs and 600 lbs Reliant Lifts ‐ Remove shoulder bolt, locknut, pinch guard and washer which secure the swivel bar to the boom mounting bracket.NOTE: Save the shoulder bolt and locknut to secure the Reliant Scale to the boom. The pinch guard will not be used when the scale is installed. Save pinch guard for future use of swivel bar without scale.•For Model No. 9805 Lift ‐ Remove shoulder bolt and locknut which secure the swivel bar to the boom mounting bracket.NOTE: Save the shoulder bolt and locknut to secure the Reliant Scale to the boom.NOTE: Removing the swivel bar hardware will release the swivel bar, two nylon washers and the swivel bar pin. Save the swivel bar pin and the two nylon washers for future use of the swivel bar without the scale. ArrayFIGURE1 Remove the Swivel BarReliant Scale RLS62Part No 1114832Install the Reliant ScaleNOTE: For this procedure, refer to FIGURE2.1.Position the load cell assembly of the Reliant Scale into the boom mounting bracket. Refer to DetailʺAʺ in FIGURE2.NOTE: For 9805 lift use 1/8‐inch thick nylon washer. For 450 lbs/600 lbs lifts use 1/4‐inch thick nylon washer.2.Secure the Reliant Scale to the boom mounting bracket with a shoulder bolt, one small steel washer,two nylon washers and a locknut. Securely tighten. Refer to Detail ʺAʺ in FIGURE2 for washer orientation.NOTE: Ensure the shaft of the shoulder bolt passes through both sides of the boom mounting bracket.3.Insert swivel bar pin with two nylon washers through the swivel bar. Refer to Detail ʺBʺ inFIGURE2.4.Align the mounting holes in the swivel bar pin with the mounting holes in the load cell assembly.Refer to Detail ʺBʺ in FIGURE2.5.Secure swivel bar pin to the load cell assembly with the provided mounting screw and locknut.Securely tighten. Refer to Detail ʺBʺ in FIGURE2.6.Weigh the patient. Refer to Operating the Scale on page4.ScalePart No 11148323Reliant Scale RLS6Operating the ScaleKeypad functionsNOTE: For this procedure, refer to FIGURE3.CAUTIONDO NOT operate keypad with pointed objects (i.e. pencils, pens, fingernails, etc.) - otherwise damage to the key pad will result.KEY INDICATORDISPLAYED INDICATORLOCATIONDEFINITIONON OFF OFFCenter of DisplayWindowPressing this key will apply power to the scaleand turn the unit on. When the scale isalready on, pressing the button will turn theunit off.ZERO ZERO Lower Left Corner ofthe Display WindowPressing this key when the scale is on will resetthe weight shown in the display window to zero.UNITS Lower Right Corner ofthe Display WindowThe function of this key is to change the unit ofmeasurement from pounds (lbs) to kilograms (kg).LOCK UNLOCK LOCKLower Right Cornerof the DisplayWindowThis key is used to lock or unlock a weightvalue in the display window.Note: Weight displayed is a stored weight andnot the current weight when the key is used inthe lock position.N/A LO BAT Center of DisplayWindowIndicator is shown in the display window tonotify when battery is low.To Operate:Attach sling.Press ON key.Press ZERO key.Lift patient.ONByDETECTOZEROKeypadReliant Scale RLS64Part No 1114832Weighing the Patientƽ WARNINGThe weight capacity is limited to the lowest rated capacity of any one of the components in use (i.e. Patient Lift, Sling or Scale). The patient's weight MUST NOT exceed the lowest rated capacity of any component.1.Attach sling straps to the swivel bar. For proper attachment instructions, refer to the Sling OwnerʹsManual ‐ Part No. 1023891.NOTE: For improved accuracy on the 450 and 600 Reliant lifts, attach all sling straps to the center hooks on both sides of the swivel bar. However, patient comfort may require a different configuration of sling straps.2.Press the On/Off key.NOTE: The display will indicate the last weight that was measured. The word ʺLOCKʺ will be seen in the display box. NOTE: The ZERO key is pressed in order to avoid capturing the weight of the sling and the hardware. If the ZERO key is not pressed the weight of the sling and the weight of the hardware will be included in the weight displayed. Not zero‐ing out will give a false reading of the userʹs true weight.3.Press the ZERO key. When the ZERO key is pushed the following will happen:A.The scale will reset to zero and the word ʺZEROʺ will appear in the display.B.The lock function will then be turned off and the word ʺLOCKʺ will disappear from the display. NOTE: The scale is now active and continually updating the weight display.4.Place the patient in the sling. For patient placement instructions, refer to the Sling Ownerʹs Manual ‐ PartNo. 1023891.ƽ WARNINGWhen elevated a few inches off the surface of a stationary object (bed, chair or commode) and before moving the patient, check to make sure that the sling is properly connected to the hooks of the swivel bar. If any attachments are NOT properly in place, lower the patient back onto the stationary surface and correct this problem - otherwise, injury or damage may occur.5.Activate the lift mechanism to raise the patient until they are completely supported by the lift.6.Note the weight display.7.When the weight display becomes stable press the LOCK button to lock the weight display. This will beindicated by the word ʺLOCKʺ appearing in the display window.NOTE: Should it be necessary to unlock the weight while the patient is still supported by the lift, the UNLOCK button may be pressed. The weight will unlock and the word ʺLOCKʺ will disappear from the display window. The weight value will then be updated. Once the weight becomes stable the weight can be locked again by pressing the LOCK button. NOTE: Stable being defined as the weight fluctuating ± two‐tenths of a pound. For example, a patient weighing one hundred pounds ‐ the scale will fluctuate between 99.8 and 100.2 until the LOCK key is pressed. Fluctuation of the weight displayed is normal as noted above. Press the LOCK button to lock the weight.NOTE: The UNITS button may be pressed to toggle between units of pounds and kilograms. This is indicated by lbs or kg appearing in the display window.8.The lift may now be lowered and the sling removed from the patient.Part No 11148325Reliant Scale RLS6Reliant Scale RLS66Part No 1114832NOTE: The patient ʹs weight will continue to be seen in the display window.NOTE: The display will turn off automatically after a two minute period of non ‐use [no changes in weight exceeding five pounds (two kilograms)]. Y ou can not adjust the time delay for automatic shut off.NOTE: After the display has turned off, the weight may be recalled by pressing the ON/OFF button.NOTE: The unit can be turned off by pressing the ON/OFF button a second time.Replacing the BatteryNOTE: For this procedure, refer to FIGURE 4.NOTE: The scale is powered by a nine volt alkaline battery that should provide approximately 1500 readings before needing replacement.When battery replacement is needed, LO BAT will appear on the display . Perform the following:1.Slide the battery door open in the direction of the arrow.2.Remove existing battery .3.Install new battery .4.Reinstall the battery door.FIGURE 4 Replacing the BatteryCalibrate the Reliant ScaleNOTE: For this procedure, refer to FIGURE 5 on page 7.NOTE: The Reliant Scale will be pre ‐calibrated at the factory with the load cell. Should it be necessary to re ‐calibrate the scale, follow the instructions outlined below.1.The patient and the sling MUST be removed from the scale to properly calibrate the Reliant Scale. Referto Operation in the Patient Lift Owner’s Manual for further instructions.2.For sling detachment instructions, refer to Lifting the Patient in the Patient Lift Owner’s Manual.3.Turn the scale display power on by pressing the ON/OFF key.4.Rotate the Swivel Bar until the back of the scale display is visible.5.Insert the tip of a paper clip or similar tool into the small hole on the back of the scale display and pressthe CAL button. NOTE: Once the CAL button is pressed, “CAL1” will be seen in the display window.6.Press the UNITS key . The display readsCAL2.Battery Door9V BatteryAssembled ScaleArrowPart No 11148327Reliant Scale RLS67.Press the LOCK/UNLOCK key . The display reads UNLD.8.Press the ZERO key . The display reads LOAD.9.Hang 200 pounds of calibrated weight from the scale and press the ZERO key .10.Press the ZERO key . The display reads DONE.11.Remove the weight. Press the LOCK/UNLOCK key .NOTE: The scale is now in test mode.12.Press the ZERO key . The display reads 0.00 lb.NOTE: The scale will now be in normal operation.FIGURE 5 Calibrate the Reliant ScaleTroubleshootingDisplay CodesCalibration Required ‐ Indicates improper stored calibration data, calibration is necessary.Over Capacity ‐ Indicates a weight exceeding the capacity has been loaded on the scale.SYMPTOMPROBABLE CAUSESOLUTIONSUnit does NOT work properly.Battery failure.Check battery. Replace if necessary.Battery has been replaced and unit still does NOT work properly.Contact Invacare for Service at1-800-333-6900.BACK VIEW OF THE SCALE DISPLAYDisplay WindowLIMITED WARRANTYPLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975.This warranty is extended only to the original purchaser/user of our products.This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state. Invacare warrants the products manufactured (excluding the 9V battery) to be free from defects in materials and workmanship for a period of one year from the date of purchase. If within such warranty period any such product shall be proven to be defective, such product shall be repaired or replaced, at Invacare’s option. This warranty does not include any labor or shipping charges incurred in replacement part installation or repair of any such product. Invacare’s sole obligation and your exclusive remedy under this warranty shall be limited to such repair and/or replacement.For warranty service, please contact the dealer from whom you purchased your Invacare product. In the event you do not receive satisfactory warranty service, please write directly to Invacare at the address on the back cover, provide dealer’s name, address, date of purchase, indicate nature of the defect.Invacare Corporation will issue a serialized return authorization. The defective unit or parts MUST be returned for warranty inspection using the serial number, when applicable as identification within 30 days of return authorization date. DO NOT return products to our factory without our prior consent. C.O.D. shipments will be refused; please prepay shipping charges.LIMITATIONS AND EXCLUSIONS: THE FOREGOING WARRANTY SHALL NOT APPLY TO SERIAL NUMBERED PRODUCTS IF THE SERIAL NUMBER HAS BEEN REMOVED OR DEFACED, PRODUCTS SUBJECTED TO NEGLIGENCE, ACCIDENT, IMPROPER OPERATION, MAINTENANCE OR STORAGE, PRODUCTS MODIFIED WITHOUT INVACARE’S EXPRESS WRITTEN CONSENT (INCLUDING, BUT NOT LIMITED TO, MODIFICATION THROUGH THE USE OF UNAUTHORIZED PARTS OR ATTACHMENTS; PRODUCTS DAMAGED BY REASON OF REPAIRS MADE TO ANY COMPONENT WITHOUT THE SPECIFIC CONSENT OF INVACARE, OR TO A PRODUCT DAMAGED BY CIRCUMSTANCES BEYOND INVACARE’S CONTROL, AND SUCH EVALUATION WILL BE SOLELY DETERMINED BY INVACARE. THE WARRANTY SHALL NOT APPLY TO PROBLEMS ARISING FROM NORMAL WEAR OR FAILURE TO ADHERE TO THE INSTRUCTIONS IN THIS MANUAL.THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, IF ANY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL NOT EXTEND BEYOND THE DURATION OF THE EXPRESSED WARRANTY PROVIDED HEREIN AND THE REMEDY FOR VIOLATIONS OF ANY IMPLIED WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT PURSUANT TO THE TERMS CONTAINED HEREIN. INVACARE SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.SOME STATES DO NOT ALLOW EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGE, OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.THIS WARRANTY SHALL BE EXTENDED TO COMPLY WITH STATE OR PROVINCIAL LAWS AND REQUIREMENTS.Invacare Corporation Rev D - 10/08。

Helena Chemical Company 农业用品说明书

S P E C I M E N L A B EL®SN 102413WEIGHT PER GALLON: 10.79 lbs (4.90 kg) @ 68°FNET CONTENTS: Bulk:Information about the components of this lot of fertilizer may be obtained by writing to Helena Chemical Company, 225 Schilling Boulevard, Suite 300, Collierville, TN 38017 and giving the lot number which is found on the container.Information regarding the contents and levels of metals in this product is available on the Internet at /metals.htmTHIS FERTILIZER CONTAINS PHOSPHOROUS AND MAY NOT BE USED ON TURF IN THE STATE OF MARYLAND.DO NOT APPL Y NEAR WATER, STORM DRAINS, OR DRAINAGE DITCHES. DO NOT APPL Y IF HEAVY RAIN IS EXPECTED.Manufactured ForHELENA CHEMICAL COMPANY225 SCHILLING BOULEVARD, SUITE 300COLLIERVILLE, TN 38017GUARANTEED ANAL YSIS:Total Nitrogen (N). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.00%6.00% Ammoniacal NitrogenAvailable Phosphate (P 2O 5). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.00%Soluble Potash (K 2O). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.00%Iron (Fe). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.20%0.20% Chelated Iron (Fe)Derived from: Ammonium phosphate, potassium hydroxide and Iron EDDHAGENERAL INFORMATIONNUCLEUS ®ORTHO-PHOS NPK FE T&O 6-21-2is a stabilized solution containing water soluble orthophosphate in combination with nitrogen, soluble potash and EDDHA iron.NUCLEUS ®ORTHO-PHOS NPK FE T&O 6-21-2is compatible with many liquid fertilizers and pesticides, provided that the following guidelines are followed:1. Do not mix NUCLEUS ®ORTHO-PHOS NPK FE T&O 6-21-2with undiluted pesticides.2. Mixtures of NUCLEUS ®ORTHO-PHOS NPK FE T&O 6-21-2with fertilizers based on potassium thiosulfate and/or ammonium thiosulfate should be applied directly after mixing.3. Do not mix or apply with products containing calcium, magnesium, copper, manganese or zinc unless they are fully chelated.4. Always “Jar Test” all tank mixes for compatibility before mixing for field applications.GENERAL RECOMMENDATIONSNUCLEUS ®ORTHO-PHOS NPK FE T&O 6-21-2may be applied to turf and ornamental plants where applications of nitrogen, phosphorous and potassium are recommended.NUCLEUS ®ORTHO-PHOS NPK FE T&O 6-21-2should be used at the rate of 2–5 Gallons per Acre – depending on plant needs. NUCLEUS ®ORTHO-PHOS NPK FE T&O 6-21-2when used as directed, this product does not supply all nutrients required by plants and is to supplement a soil fertility program based on soil tests. NUCLEUS ®ORTHO-PHOS NPK FE T&O 6-21-2may be applied through ground application or irrigation equipment. For ground applications equipment, NUCLEUS ®ORTHO-PHOS NPK FE T&O 6-21-2should be applied in combination with 2–3 gallon of water and/or liquid fertilizer.APPLICATION AND MIXING GUIDEAPPLICATION RATES:1 to 5 gallons per acre according to soil fertility needs. Product should not be used if plant is under stress from pests, heat or inadequate soil moisture. 1 gallon of NUCLEUS ®ORTHO-PHOS NPK FE T&O 6-21-2 contains 0.02 lbs. of EDDHA Fe.TURF RECOMMENDATIONS:Apply at the following rates per 1000 Sq Ft in sufficient water volume to provide adequate coverage.TREE and SHRUB Recommendations:Mix 2 gallon NUCLEUS ®ORTHO-PHOS NPK FE T&O 6-21-2 in 100 gallons of water and use as root feed solution. Apply as needed.MIXING:In any mixing operation introduce NUCLEUS ®ORTHO-PHOS NPK FE T&O 6-21-2in the following sequence:1. Water2. NUCLEUS ®ORTHO-PHOS NPK FE T&O 6-21-23. Other Fertilizers4. Pesticides or Soil conditionersNOTE:NUCLEUS ®ORTHO-PHOS NPK FE T&O 6-21-2may crystallize in freezing temperatures but will reconstitute in warmer temperatures.CONDITIONS OF SALE –LIMITED WARRANTY AND LIMITATIONS OF LIABILITY AND REMEDIESRead the Conditions of Sale – Warranty and Limitations of Liability and Remedies before using this product. If the terms are not acceptable, return the product,unopened, and the full purchase price will be refunded.This label is believed to be reliable and should be followed carefully. Injury to the crop to which the product is applied may result from the occurrence of extraordinary or unusual weather conditions or the failure to follow the label directions or good application practices, all of which are beyond the control of Helena Chemical Company (the “Company”) or seller. In addition,failure to follow label directions may cause injury to crops, animals, man or the environment.The Company warrants that this product conforms to the chemical description on the label and is reasonably fit for the purpose referred to subject to the factors noted above which are beyond the control of the Company. The Company makes no other warranties or representations of any kind, express or implied, concerning the product, including no implied warranty of merchantability or fitness for any particular purpose, and no such warranty shall be implied by law.The exclusive remedy against the Company for any cause of action relating to the handling or use of this product shall be limited to, at Helena Chemical Company’s election, one of the following:1. Refund of the purchase price paid by buyer or user for product bought, or2. Replacement of the product usedTo the extent allowed by law, the Company shall not be liable and any and all claims against the Company are waived for special, indirect, incidental, or consequential damages or expense of any nature, including, but not limited to, loss of profits or income. The Company and the seller offer this product and the buyer and user accept it, subject to the foregoing conditions of sale and limitation of warranty, liability and remedies.© Copyright Helena Holding Company, 2013NUCLEUS ®is a registered trademark of Helena Holding Company.STORAGE AND DISPOSALKeep container tightly closed. May be stored in unheated area, but keep from freezing. Do not contaminate water sources by cleaning of equipment or disposal of rinse-water.Dispose of empty containers by triple rinsing (or equivalent) with water and pouring rinsate into spray tank. Recycle rinsed containers whenever possible or puncture and discard empty containers in a landfill in accordance with current local, state and federal regulations.Rate: Fluid ounces/M SQ FT6.0 oz 9.0 oz 12.0 oz 15.0 oz Lbs N .03.045.06.075Lbs P .105.16.21.265Lbs K.01.015.02.025PRECAUTIONARY STATEMENTSWARNINGBEFORE USING THIS PRODUCT, READ ALL PRECAUTIONS, DIRECTIONS FOR USE,CONDITIONS OF SALE –LIMITED WARRANTY AND LIMITATIONS OF LIABILITY AND REMEDIES.Avoid contact with formulated product. Do not take internally. Avoid contact with or inhalation of the spray mist. If product is being mixed with pesticides, other fertilizers, and/or spray adjuvants, follow all precautionary statements on the accompanying product(s) labeling.WHAT TO DO IN CASE OF CONTACT:IF SWALLOWED:Induce vomiting. Immediately call a doctor or a poison control center.IF IN EYES:Flush eyes with clean water for 15 minutes. Call a doctor or poison control center if irritation persists.IF ON SKIN:Remove contaminated clothing and wash skin with soap and water. Call a doctor if irritation develops or persists.IF INHALED:Move to fresh air and call a doctor if irritation develops or persists.If there is contact made with a spray solution containing pesticides and/or other products,follow the “Statement of Practical Treatment/First Aid” on the label requiring the most stringent treatment.Disclaimer:Always refer to the label on the product before using Helena or any other product.。

Sovella 快发产品目录说明书

PRODUCTS SOVELLA BESTSELLERS READY TO SHIP IN 5 DAYS!Sovella Best-sellers, shipped FAST2Sovella - QuickShip Products 800-437-6772Wide variety of bench styles• Choose from 3 frame styles: 4-leg, light motor table, or C-leg manual • All frames are height adjustable and able to be equipped with casters • Standard light grey powder-coated ESD paintLarge selection of accessories • Accessories include: shelves, lighting, power, storage, drawers, and more!Ready to ship in just 5 days!•Products ship from Sovella warehouse in Canton, GA 30114TPLMTConcept60” x 30” (59.1” x 27.6”)Laminate 66025.6”-35.4”US-TP3060TPK 72” x 30” (70.9” x 27.6”)Laminate 66025.6”-35.4”US-TP3072TPK 48” x 30” (47.2” x 27.6”)ESD Laminate 66025.6”-35.4”US-TP3048TPKESD 60” x 30” (59.1” x 27.6”)ESD Laminate 66025.6”-35.4”US-TP3060TPKESD 72” x 30” (70.9” x 27.6”)ESD Laminate 66025.6”-35.4”US-TP3072TPKESD LMT48” x 30” (47.2” x 29.5”)Laminate 33025.39”-45.08”854667-4160” x 30” (59.1” x 29.5”)Laminate 33025.39”-45.08”854668-4172” x 30” (70.9” x 29.5”)Laminate 33025.39”-45.08”854669-4148” x 30” (47.2” x 29.5”)ESD Laminate 33025.39”-45.08”854667-4960” x 30” (59.1” x 29.5”)ESD Laminate 33025.39”-45.08”854668-4972” x 30” (70.9” x 29.5”)ESD Laminate 33025.39”-45.08”854669-49Concept Manual48” x 30” (47.2” x 29.1”)Laminate 110026.62”-44.34”US-10049560P 60” x 30” (59.1” x 29.1”)Laminate 110026.62”-44.34”US-10049562P 72” x 30” (70.9” x 29.1”)Laminate 110026.62”-44.34”US-10049564P 48” x 30” (47.2” x 29.1”)ESD Laminate 110026.62”-44.34”US-10049561P 60” x 30” (59.1” x 29.1”)ESD Laminate 110026.62”-44.34”US-10049563P 72” x 30” (70.9” x 29.1”)ESD Laminate110026.62”-44.34”US-10049565P• 1” low pressure laminate • Light grey surface •Plastic edging• 1” low pressure laminate • Light grey surface •Plastic edging• Light-grey, ESD laminate surface • Grey 180° rolled front edge • Thickness 1 3/16 inches• Grey laminate surface • Black molded “waterfall” edges •Thickness 1 3/16 inches3Sovella - QuickShip ProductsPreconfigured Workstations with Uprights72” x 30”Laminate Double Bay 14-CTP916-4160” x 30”ESD Laminate Double Bay 14-CTP915-4972” x 30”ESD Laminate Double Bay 14-CTP916-49Concept Manual60” x 30”Laminate Double Bay 14-C1004143472” x 30”Laminate Double Bay 14-C1004143560” x 30”ESD Laminate Double Bay 14-C1004943472” x 30”ESD LaminateDouble Bay14-C10049435*Double Bay upright modules not compatible with LMT workstations.60” x 30”Laminate Single Bay 14-CTP911-4172” x 30”Laminate Single Bay 14-CTP912-4148” x 30”ESD Laminate Single Bay 14-CTP910-4960” x 30”ESD Laminate Single Bay 14-CTP911-4972” x 30”ESD Laminate Single Bay 14-CTP912-49LMT48” x 30”Laminate Single Bay 14-C8544131660” x 30”Laminate Single Bay 14-C8544131772” x 30”Laminate Single Bay 14-C8544131848” x 30”ESD Laminate Single Bay 14-C8544931660” x 30”ESD Laminate Single Bay 14-C8544931772” x 30”ESD Laminate Single Bay 14-C85449318Concept Manual48” x 30”Laminate Single Bay 14-C1004139660” x 30”Laminate Single Bay 14-C1004139772” x 30”Laminate Single Bay 14-C1004139848” x 30”ESD Laminate Single Bay 14-C1004939660” x 30”ESD Laminate Single Bay 14-C1004939772” x 30”ESD LaminateSingle Bay14-C10049398Shown above: TP bench with double bay uprights Order No. 14-CTP915-41Shown above: TP bench with single bay uprights Order No.14-CTP911-414Sovella - QuickShip Products 800-437-6772Well-chosen accessories optimize workstation functionality and increase usability. When a workstation is well-organized and well-equipped, workflow becomes easier and more efficient, improving ergonomics and making it easier to keep tools in place.Below are some of Sovella’s in-stock and ready to ship accessories!Customize, personalize and reconfigure – it’s easy!Slotted uprights are the basic element for accessorizing Sovella tables. Accessories are attached to Sovella tables with the aid of slotted upright modules. The uprights are attached to the back of the table.121 x M60US-9074908P 1 x M72US-9074909P 2 x M30US-90349001P 2 x M36US-90449001Ph = module’s height attached from the worksurface*Double Bay upright modules not compatible with LMT workstations.1 x M60US-854924-491 x M72US-854928-49M6059.05”33US-91849006P M7270.86”33US-91849008P5Sovella - QuickShip ProductsM6057.75 x 11.81176US-854481-49M7269.80 x 11.81176US-854482-49M3634.25 x 11.81110US-852283-49M3635.23 x 3.54110US-859152-49M4847.04 x 3.54110US-859157-49M6058.89 x 3.54110US-859154-49M7270.66 x 3.54110US-859155-4936” Dual Intensity LED, balancer rail 33.46” x 1.26” x 1.81”14-9503515248” Dual Intensity LED, balancer rail 44.48” x 1.26” x 1.81”14-9503515324” Dual Intensity LED, magnetic 22.44” x 1.26” x 1.81” 14-9503515436” Dual Intensity LED, magnetic 33.46” x 1.26” x 1.81”14-9503515548” Dual Intensity LED, magnetic44.48” x 1.26” x 1.81”14-95035156ESD Footrest with massage rollerJT2ESDCaster Set Ø 3.93” nonESD (2 - locking, 2 - non-locking)834734-00M36 Bin rail w/6 outlet power 14-9114910M48 Bin rail w/6 outlet power 14-9114915M60 Bin rail w/6 outlet power 14-9114919M72 Bin rail w/6 outlet power14-91149237451011336Accessories6Sovella - QuickShip Products 800-437-6772Accessories,Bins4 stacking bins, blue(2) 1525-6 (9.84"x5.87"x5.12") (2) 1520-6 (7.56"x5.87"x4.13")SBS4-24 ESD Stacking bins, black (6.5” x 4.13” x 2.95”)SBS4-1015-4ESD 4 ESD stacking bins, black(2) 1525-4ESD (9.84"x5.87"x5.12") (2) 1520-4ESD (7.56"x5.87"x4.13")SBS4-2ESD*Order No includes 4 bins. Individual bins available with standard delivery time.152056*********56810126 Shelf bins, blue (11.81” x 5.20” x 3.94”)SBS6-3015-66 Shelf bins, blue (11.81” x 7.32” x 3.23”)SBS6-3020-66 ESD Shelf bins, black (11.81” x 3.62” x 3.23”)SBS6-3010-4ESD 6 ESD Shelf bins, black (11.81” x 5.20” x 3.94”)SBS6-3015-4ESD 6 ESD Shelf bins, black (11.81” x 7.32” x 3.23”)SBS6-3020-4ESD*Order No includes 6 bins. Individual bins available with standard delivery time.Stacking binsOur stacking bins have been designed for daily use in stores, production facilities and warehouses. These bins have been designed to fit all standard shelves, paternosters and industrial workstations. Bins of the same width stack securely, even if they are of different lengths. Straight sides ensure an efficient use of space.Shelf binsShelf bins are designed to fit all standard shelves, cabinets and industrial workstations.Bins of the same width stack securely, even if they are of different lengths. Straight sides ensure an efficient use of space, and the bins are available in several bright colors to facilitate product identification. Each drawercomes with a label and protective cover.Terms and ConditionsQuickShip only available for item numbers listed in this brochure. Shipping method must be specified at the time of order. QuickShip productsare ready to ship in five days. Sovella is not responsible for delayed pickups by freight company. Ship time may vary for large orders over 10 benches.Freight is FOB shipping point, Canton, GA. Freight will be pre-paid and added to the invoice or freight collect according to your written instructions. We will coordinate shipments with your representatives. If the job site is not ready to accept shipments at the time scheduled, wewill not be responsible for moving material in or out of storage or other job site locations and any costs incurred. ”FOB shipping point” indi-cates the buyer pays shipping cost to the end user, and takes responsibility for the goods when the goods leave the Sovella’s premises or the premises of the Sovella subcontractor when drop shipping direct from the Sovella subcontractor to the end user.All material is shipped knocked-down unless otherwise noted. Assembly and installation is not included.Receipt of goods must be inspected and inventoried. Any shortage must be reported in writing within 48 hours. Sovella’s freight terms areFOB Canton, GA. Any freight damage should be noted on the freight bill at the time of receipt. Claims should be reported to the freight com-pany directly as soon as possible. Sovella will assist in the claims process but cannot file the claims.Return policy; All returned goods require a RMA number (Return Merchandise Authorization) issued by Sovella, Inc. prior to the return of any goods. All Requests for return authorization must be within 60 days of original invoice. All returns should be packaged so that it is re-turned in re-sellable condition; returned freight prepaid. Upon receipt and inspection of product, Sovella, inc. will issue an 80% credit against applicable invoice if product is deemed re-sellable. Custom or non-standard products may not be returned.Authorization of partial shipments requires written approval from the distributor and acceptance by Sovella, Inc.Terms are NET 30 days from the date of invoice.Warranty: Steel construction and weldments, (5) five years from date of shipment. Mechanical cranks, fixtures and devices, (1) one yearfrom date of shipment. Electrical motors, fixtures, and devices, (1) one year from date of shipment. All in accordance with established Sovella warranty statements.All products are Sovella gray (RAL 7035) in color unless otherwise noted.All items noted with ESD properties are guaranteed to meet ESD requirements specified in the IEC-61340-5-1 standard.Connection, grounding, any local requirements and verification of same is the responsibility of the end user.Sovella will not accept any contract or agreement that contains any penalties or liquidated or actual damages.All orders are subject to credit approval by Sovella, Inc.Any order under our $100.00 minimum will be subject to a $25.00 handling fee. Spare parts excluded.PackagingSovella takes pride in protecting our shipments from damage. Shipments are carefully packed to ensure shipments are received damage-free. Upon shipping, ”DO NOT STACK” cones are placed on top of the boxes. A photograph of the shipment is placed on the outside ofthe package to display the state of the shipment as it is shipped. The photograph provides photo proof to the receiver as to the state of the shipment upon departure from origin.7Sovella - QuickShip ProductsLong story in shortCONTACT INFORMATIONTreston Deutschland GmbH Thomas-Mann-Str. 2122175 HamburgTel. +49 40 8816 5022 - 0Fax +49 40 8816 5022 - 10info.de@ www.treston.deTreston International Trading (Shanghai) Ltd15/F, Tower 2, Plaza 66No. 1266 West Nanjing Road Jing’an District, Shanghai 200040Tel. +86 21 6039 8572info@ (Chinese) (international)Treston Deutschland GmbH Niederlassung Raunheim Frankfurter Straße 10165479 RaunheimTel. +49 6142 992 50Fax +49 6142 218 75mail.de@ www.treston.deTreston Ltd Treston House5b Bone Lane, Newbury Berkshire, RG14 5SH Tel. +44 1635 521521Fax +44 1635 37452salesuk@ Industrimøbler AS Stålfjæra 10975 OsloTel. +47 22 25 05 00post@industrimobler.no www.industrimobler.noTreston Group Russia LLC197375, Russia, Saint-Petersburg,Marshala Novikova street 42Tel. +7 812 677 76 20info.ru@ Sovella, Inc.156 Bluffs Court Canton, GA 30114Tel. +1 770 721 7980+1 800 437 6772Fax +1 770 720 6584infousa@ Treston Ergonaul. E. Orzeszkowej 6 lok. 2A 05-825 Grodzisk Mazowiecki Tel. +48 604 11 98 64info@ergona.pl www.ergona.plTreston France SARLZ.A.C. de la Bonne Rencontre1, voie Gallo Romaine,Quincy-Voisins 77334 Meaux Cedex Tel. +33 1 64 17 11 11Fax +33 1 64 17 11 10infofr@ www.treston.frTreston ABTumstocksvägen 9 A 187 66 TäbyTel. +46 8 511 791 60Fax +46 8 511 797 60info.se@ www.treston.seSovella Human Workspace BV Mechelaarstraat 174903 RE Oosterhout Tel. +31 162 454 383Fax +31 162 434 712infoben@humanworkspace.nl www.humanworkspace.nlGERMANYRUSSIAFRANCESWEDENBENELUXCHINAUNITED KINGDOMNORWAYUSA HEADQUARTERSPOLANDTreston Oy, Turku plant Sorakatu 120730 TurkuTel. +358 10 4469 11Fax +358 10 4469 789sales@ www.treston.fiTreston Oy Sorakatu 120730 TurkuTel. +358 10 4469 11Fax +358 10 4469 789sales@ Treston Oy, Jyväskylä plant PO Box 33 (Sohlberginkatu 10)40351 JyväskyläTel. +358 10 4469 11Fax +358 10 4469 290sales@ www.treston.fiFACTORIESHEADQUARTERSPremium partnersC o p y r i g h t © 2016 S o v e l l a . A l l r i g h t s r e s e r v e d . S p e c i f i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t p r i o r n o t i c e .Thanks to our global sales network, you can receive local support and customer service anywhere in the world. We have offices in Europe and North America as well as an extensive network of selected dealers in more than 30 countries.Sovella has a long history in professional furniture design and manufacture, and well over four decades of experience in ergonomic workspace development. Our design and manufacturing facilities are located in Finland.。

11种草甘膦助剂除草活性筛选

95 植株称鲜质量 , 与空白对照比 100 较 , 计算鲜质量抑制率 ( %) : 鲜质量抑制率 ( %) = 100 ×( 对照鲜质量 - 处理鲜质量) Π 对照鲜质量。 11314 数据处理表2 不同制剂草甘膦对低龄小麦 15 d 鲜质量抑制率回归分析采用 DPS 数据统计 Table 2 Regression analysis of the reducing rates of young wheatsπ fresh weight 分析软件 ( 唐启义 , treated by eleven glyphosate adjuvants (15 days) 冯明光) 进行各样品药剂编号回归方程相关系数 D E90 / (mL ・ hm - 2 ) 的剂量 — 反应 ( 抑制 JB21 y = 41373 8 + 11097 3 x 01982 1 81217 JB22 y = 41509 0 + 11067 5 x 01990 1 83614 率) 相关性的回归分 JB23 y = 41803 7 + 01859 2 x 01948 7 78714 析 , 获得回归方程 ( y JB24 y = 41883 4 + 01835 3 x 01958 1 70718
摘要 : 为从 11 种不同助剂配方的草甘膦制剂中甄选出性能优异的配方 , 用生物测定的方法 , 对具有不同助剂的草甘膦制剂在低温条件下的药效作用速度和最终活性大小进行评价。试验选用易于生长控制的大小龄期 2 批小麦 Triticum sestirum 作为供试靶标 , 用自动生测喷雾塔进行梯度剂量处理 , 后置于 919～1918 ℃, 相对湿度为 50 %～70 %的人工气候室内培养 15 d , 再进行目测和鲜质量结果分析。试验结果认为 , 编号为 JB27 和 JB24 的 2 个药剂在作用速度和最终药效发挥上都有很好表现 , 选定为最佳药剂 , JB26 和 JB211 为第 2 梯队品种。筛选出的 4 个药剂需要进入田间进一步研究。该方法可用于药效接近药剂的筛选 , 具有简便、可行的特点。表 6 参 15 关键词 : 植物保护学 ; 草甘膦 ; 助剂 ; 筛选 ; 生物测定 ; 小麦中图分类号 : S48214 文献标识码 : A 草甘膦因低成本、广谱和对环境友好等特点 , 成为目前全球生产、销售和使用量最大的除草剂。

25%氰氟草酯水乳剂的研制-7页word资料

25%氰氟草酯水乳剂的研制一、前言随着人们对环境的认识越来越深，农药水基化剂型发展越来越受关注，水乳剂是水基化剂型重要发展方向，本文是笔者对氰氟草酯水乳剂[1]的试验介绍。

二、材料和方法（一）材料氰氟草酯原药（南京耐瑟斯化工有限公司；含量≥95%）；S-85（失水山梨醇脂肪酸酯），AEO-9（脂肪醇聚氧乙烯醚），AEO-7（脂肪醇聚氧乙烯醚），EL-105（蓖麻油聚氧乙烯醚），NP-10-P（磷酸酯），JP-20（江苏钟山化工有限公司），Tersperse2208（亨斯迈化学品有限公司），SK-355（星飞化工有限公司），SK-551（星飞化工有限公司），601#[2]（苯乙基酚聚氧乙烯醚），MF-35（美丰农化有限公司）；非离子增效剂3710（北京格林泰姆科技有限公司），Terwet1118（亨斯迈化学品有限公司），有机硅408（市场购买）；三乙醇胺（邢台蓝星助剂厂）；丙三醇（市场购买）；DF-150（百合化学），DF-204（百合化学），BL-100（苏州百斯盾化学有限公司），消泡剂883（百合化学），消泡剂886（百合化学），消泡剂AF（上海汇平化工）；四氯乙烯（上海新天石油化工有限公司），四甲苯（浙江森太化工股份有限公司），二甲苯（温州市三立化工有限公司）；（二）25%氰氟草酯水乳剂制备方法按照配方中具体比例准确称取氰氟草酯原药、表面活性剂加入到有机溶剂中，混合成均匀溶液，然后将称好的去离子水、慢慢滴入油相中，边滴边搅拌，最后按配比加入防冻剂和消泡剂，混合搅拌，再进行高速剪切，对其进行检合格后，出料即可得到25%氰氟草酯水乳剂。

三、25%氰氟草酯水乳剂应符合表1要求表1 25%氰氟草酯水乳剂控制项目指标项目指标氰氟草酯质量分数，% 25.0+1.5 -1.5PH值范围 5.0-8.0倾倒性倾倒后残余物，% ≤ 5.0洗涤后残余物，% ≤ 1.0乳液稳定性（稀释200倍）合格持久起泡性（1min后），mL ≤ 30低温稳定性合格热贮稳定性合格注：正常情况下，低温稳定性和热贮稳定性试验，每三个月至少进行一次。

VERSILOK 254 产品说明书

USA SAFETY DATA SHEET1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONProduct name:VERSILOK 254Product Use/Class: Acrylic Adhesive, Part 2 of 2LORD Corporation111 LORD DriveCary, NC 27511-7923 USATelephone: 814 868-3180Non-Transportation Emergency: 814 763-2345Chemtrec 24 Hr Transportation Emergency No.800 424-9300 (Outside Continental U.S. 703 527-3887)EFFECTIVE DATE: 11/18/20202. HAZARDS IDENTIFICATIONGHS CLASSIFICATION:Acute toxicity Inhalation - Dust and MistCategory 4 - 63.1% of the mixture consists of ingredient(s) of unknown toxicity.Reproductive toxicity Category 2Specific target organ systemic toxicity (single exposure) Category 1 Nervous systemSpecific target organ systemic toxicity (repeated exposure) Category 1 Nervous systemSpecific target organ systemic toxicity (repeated exposure) Category 2 Adrenal glandHazardous to the aquatic environment - acute hazard Category 1Hazardous to the aquatic environment - chronic hazard Category 1GHS LABEL ELEMENTS:Symbol(s)Signal WordD ANGERHazard StatementsHarmful if inhaled.Suspected of damaging fertility or the unborn child.Causes damage to organs.(Nervous system)Causes damage to organs through prolonged or repeated exposure.(Nervous system)May cause damage to organs through prolonged or repeated exposure.(Adrenal gland)Very toxic to aquatic life.Very toxic to aquatic life with long lasting effects.Precautionary StatementsPreventionObtain special instructions before use.Do not handle until all safety precautions have been read and understood.Use personal protective equipment as required.Do not breathe dust/fume/gas/mist/vapors/spray.Wash thoroughly after handling.Do not eat, drink or smoke when using this product.Use only outdoors or in a well-ventilated area.Avoid release to the environment.300000001064ResponseCall a POISON CENTER or doctor/physician if you feel unwell.IF exposed: Call a POISON CENTER or doctor/physician.Specific treatment (see supplemental first aid instructions on this label).IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing.Collect spillage.StorageStore locked up.Disposal:Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.Other Hazards:This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s).Acute: Dermal absorption possible. May cause eye irritation. May cause respiratory tract irritation. May causeheadache and nausea. See Section 11 for additional information. May be harmful if swallowed. Ingestion is not an expected route of entry in industrial or commercial uses.Chronic: Repeated or prolonged skin contact may cause allergic reactions with susceptible persons. Chronicexposure to the tricresyl phosphate in this product may cause adrenal, reproductive and developmental effects based on animal data. See Section 11 for additional information.withheld.FIRST AID - EYE CONTACT: Flush eyes immediately with large amount of water for at least 15 minutes holding eyelids open while flushing. Get prompt medical attention.FIRST AID - SKIN CONTACT: Flush contaminated skin with large amounts of water while removing contaminated clothing. Wash affected skin areas with soap and water. Get medical attention if symptoms occur.FIRST AID - INHALATION: Move person to fresh air. Restore and support continued breathing. If breathing is difficult, give oxygen. Get immediate medical attention.FIRST AID - INGESTION: If swallowed, do not induce vomiting. Call a physician or poison control center immediately for further instructions. Never give anything by mouth if victim is rapidly losing consciousness, unconscious or convulsing.SUITABLE EXTINGUISHING MEDIA: Carbon Dioxide, Dry Chemical, Foam, Water FogUNSUITABLE EXTINGUISHING MEDIA: Not determined for this product.SPECIFIC HAZARDS POSSIBLY ARISING FROM THE CHEMICAL: Keep containers tightly closed. Closed containers may rupture when exposed to extreme heat. Use water spray to keep fire exposed containers cool. During a fire, irritating and/or toxic gases and particulate may be generated by thermal decomposition or combustion.SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIRE-FIGHTERS: Wear full firefighting protective clothing, including self-contained breathing apparatus (SCBA). If water is used, fog nozzles are preferable.PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES: Avoid breathing vapors. Avoid contact. Use appropriate respiratory protection for large spills or spills in confined area.ENVIRONMENTAL PRECAUTIONS: Do not contaminate bodies of water, waterways, or ditches, with chemical or used container.METHODS AND MATERIALS FOR CONTAINMENT AND CLEANUP: Notify appropriate authorities if necessary. Avoid contact. Keep non-essential personnel away from spill area. Scoop spilled material into an appropriate container for proper disposal. (If necessary, use inert absorbent material to aid in containing the spill).HANDLING: Keep closure tight and container upright to prevent leakage. Avoid skin and eye contact. Wash thoroughly after handling. Do not handle until all safety precautions have been read and understood.STORAGE: Store only in well-ventilated areas. Keep container closed when not in use.INCOMPATIBILITY: Amines, acids, water, hydroxyl, or active hydrogen compounds.Engineering controls: Sufficient ventilation in pattern and volume should be provided in order to maintain air contaminant levels below recommended exposure limits.PERSONAL PROTECTION MEASURES/EQUIPMENT:RESPIRATORY PROTECTION: Use a NIOSH approved air-purifying organic vapor respirator if occupational limits are exceeded. For emergency situations, confined space use, or other conditions where exposure limits may be greatly exceeded, use an approved air-supplied respirator. For respirator use observe OSHA regulations (29CFR1910.134) or use in accordance with applicable laws and regulations of your country or particular locality.SKIN PROTECTION: Use neoprene, nitrile, or rubber gloves to prevent skin contact.EYE PROTECTION: Use safety eyewear including safety glasses with side shields and chemical goggles where splashing may occur.OTHER PROTECTIVE EQUIPMENT: Use disposable or impervious clothing if work clothing contamination is likely. Remove and wash contaminated clothing before reuse.HYGIENIC PRACTICES: Wash hands before eating, smoking, or using toilet facility. Food or beverages should not be consumed anywhere this product is handled or stored. Wash thoroughly after handling.Typical values, not to be used for specification purposes.ODOR: Epoxy VAPOR PRESSURE: N.D.APPEARANCE: Gray VAPOR DENSITY: Heavier than AirPHYSICAL STATE: Liquid LOWER EXPLOSIVE LIMIT: Not ApplicableUPPER EXPLOSIVE LIMIT: Not ApplicableFLASH POINT:≥ 201 °F, 93 °CSetaflash Closed CupBOILING RANGE: N.A.EVAPORATION RATE: Not Applicable AUTOIGNITION TEMPERATURE:N.D.DENSITY: 1.44 g/cm3 (11.97 lb/gal) DECOMPOSITION TEMPERATURE:N.D. VISCOSITY, DYNAMIC: N.D.ODOR THRESHOLD: N.D.VISCOSITY, KINEMATIC: N.D.SOLUBILITY IN H2O: Insoluble VOLATILE BY WEIGHT: 0.03 %pH: N.A.VOLATILE BY VOLUME: 0.05 %FREEZE POINT: N.D. VOC CALCULATED: 0 lb/gal, 0 g/l0 g/lN.D. METHOD 24: 0.85 lbs/gal COEFFICIENT OF WATER/OILDISTRIBUTION:LEGEND: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not DeterminedHAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur under normal conditions. STABILITY: Product is stable under normal storage conditions.CONDITIONS TO AVOID: High temperatures.INCOMPATIBILITY: Amines, acids, water, hydroxyl, or active hydrogen compounds.HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide, aldehydes, Oxides of phosphorusEXPOSURE PATH: Refer to section 2 of this SDS.SYMPTOMS:Refer to section 2 of this SDS.TOXICITY MEASURES:Germ cell mutagenicity: No classification proposedCarcinogenicity: No classification proposedReproductive toxicity: Category 2 - Suspected of damaging fertility or the unborn child.Components contributing to classification: Tricresyl phosphate.TOXICOLOGICAL INFORMATION:Historical data on Tricresyl phosphate (TCP) has shown neurological effects associated with levels of the ortho isomer within TCP. The manufacturer of the TCP in this product has noted on their SDS that the TCP does not exhibit negative neurological effects based on toxicology and epidemiology studies. This LORD product may contain a very small amount of the ortho isomer. However, LORD analytical testing of the raw material containing TCP indicates no ortho isomer present. Also, based on the TCP manufacturer's information, the LORD product content should not exceed225ppm, if present at all.ECOTOXICITY:PERSISTENCE AND DEGRADABILITY:Not determined for this product.BIOACCUMULATIVE: Not determined for this product.MOBILITY IN SOIL: Not determined for this product.OTHER ADVERSE EFFECTS: Not determined for this product.DISPOSAL METHOD: Disposal should be done in accordance with Federal (40CFR Part 261), state and local environmental control regulations. If waste is determined to be hazardous, use licensed hazardous waste transporter and disposal facility.US DOT RoadProper Shipping Name: Environmentally hazardous substances, liquid, n.o.s.Hazard Class: 9SECONDARY HAZARD: NoneUN/NA Number: 3082Packing Group: IIIEmergency Response Guide Number: 171For US DOT non-bulk road shipments this material may be classified as NOT REGULATED. For the most accurate shipping information, refer to your transportation/compliance department regarding changes inpackage size, mode of shipment or other regulatory descriptors.IATA CargoPROPER SHIPPING NAME: Environmentally hazardous substance, liquid, n.o.s.Hazard Class: 9HAZARD CLASS: NoneUN NUMBER: 3082PACKING GROUP: IIIEMS: 9LIMDGPROPER SHIPPING NAME: Environmentally hazardous substance, liquid, n.o.s.Hazard Class: 9HAZARD CLASS: NoneUN NUMBER: 3082PACKING GROUP: IIIEMS: F-AThe listed transportation classification applies to non-bulk shipments. It does not address regulatory variations due to changes in package size, mode of shipment or other regulatory descriptors. For the most accurate shipping information, refer to your transportation/compliance department.U.S. FEDERAL REGULATIONS: AS FOLLOWS:SARA SECTION 313This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372.:Chemical Name CAS Number Weight % Less ThanDibenzoyl peroxide94-36-0 5.0%TOXIC SUBSTANCES CONTROL ACT:INVENTORY STATUSThe chemical substances in this product are on the TSCA Section 8 Inventory.EXPORT NOTIFICATIONThis product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from the United States:NoneUnder HazCom 2012 it is optional to continue using the HMIS rating system. It is important to ensure employees have been trained to recognize the different numeric ratings associated with the HazCom 2012 and HMIS schemes.HMIS RATINGS - HEALTH: 2* FLAMMABILITY: 1 PHYSICAL HAZARD: 1* - Indicates a chronic hazard; see Section 2Revision: Company LogoEffective Date: 11/18/2020The information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations.。

WelexS.AHoldings（China）Limited

WelexS.AHoldings（China）Limited草甘膦水溶性颗粒剂（SG）草甘膦水溶性颗粒剂（SG）：将溶于水的草甘膦铵盐原药和可溶性填料经充分混合，加入专用增效剂及水捏合成湿物料，再经造粒干燥后得到的能在水中迅速分散并完全溶解于水的颗粒剂型，它是一种近年来为适应日益提高的环保要求以及方便应用而开发的新型草甘膦剂型。

专用助剂---TERWET 1221：TERWET 1221是亨斯迈针对客户及市场对草甘膦水溶性颗粒剂这种新剂型日益增加的要求，经过大量科学的助剂筛选、制剂制备及田间实验而开发的且具有专利的草甘膦水溶性颗粒剂专用增效助剂。

通过大量的配方及田间试验表明，TERWET 1221应用于草甘膦水溶性颗粒剂具有以下特点：1．极好的田间药效表现是TERWET 1221成为草甘膦水溶性颗粒剂专用助剂的前提。

2．增效助剂TERWET 1221的有效含量为100%，具有极好的配方兼容性，加入量可根据需要进行调节，更便利于产品的工艺过程选择和实现。

3．对水生生物低毒和环境友好是TERWET1221能使产品行销全球及适应未来的可靠基础。

4．TERWET 1221所特有良好的黏结、增效和润滑性能使得在草甘膦水溶性颗粒剂加工过程中表现出挤出成形更为流畅、产品外观更为光滑饱满、工艺过程更为顺利、设备产量得到有效提高等应用优势。

5．实现对水生生物低毒化，能使制剂行销全球。

▼ TERWET 1221的推荐用量为10%，添加量也可根据实际用药环境、草相及需要而进行适当调整，最大调整范围5——20% ▼ 原药加入量可在实验的基础上在一定范围内调整。

▼ 加工过程中去离子水的加入量会因原药含量、细度、晶形的差异而变化，正常加水量为料重的5-10%。

▼ 制剂成品中的残余水量应保持在0.5-1.0%左右。

制剂制备方法：1． TERWET 1221预热◆ 将TERWET 1221预热至60-70℃以上保温并全部液化为透明液体。

威来惠南的农用表面活性剂介绍

依靠完善的销售网络，专业化的销售队伍，使我们为客户提供优质的产品和及时可靠的服务。

公司自成立以来，已经和多家国际化工公司建立了密切的合作伙伴关系，“关注客户需求，引进先进产品”，跟客户建立合作战略伙伴关系。

特别是对于拟除虫菊酯农药品种的水乳剂配方，TERMUL5030作为乳化剂显示出独特的配伍性能。

Sherwin-Williams 产品说明书

Description: SPR INT SG AIR ProductA88W00061Due to screen and print limitations, colors seen here may not accurately reflect painted colors. To confirm your color choices, visit your neighborhood Sherwin-Williams storeReference PagesData Pages101.29SGSuperPaint®Air Purifying Technology Interior Acrylic Semi-Gloss A88-61 Extra White, A88-63 Deep BaseCHARACTERISTICSAir Purifying Technology helps reduce V.O.C. levels from potential sources like carpet, cabinets and fabrics and works to reduce unwanted household odors.*Odor Eliminating Technology helps reduce common indoor odors so rooms stay fresher, longer.*Anti-microbial agents inhibit the growth of mold and mildew on the paint surface and inhibit the growth of bacterial odors.Zero V.O.C. formula tinted with ColorCast Ecotoner® Colorants that do not add V.O.C.s when tinted.Great hide and a durable finish that withstands frequent washings.Color:Most Colors To optimize hide and color development, always use the recommended P-Shade primerCoverage:350-400 sq.ft.per gallon@ 4 mils wet;1.7 mils dry Drying Time, @ 77°F, 50% RH:Touch: 1 HourRecoat: 4 Hour Drying and recoat times are temperature, humidity, and film thickness dependentFinish:35-45 units @ 60°Tinting with CCE only:Base:oz. pergallon:Strength:Extra White0-5SherColor Deep Base4-12SherColorExtra White A88W00061(may vary by color)V.O.C. (less exempt solvents):less than 50 grams per litre; 0.42 lbs. per gallonAs per 40 CFR 59.406 Volume Solids:42 ± 2% Weight Solids:54 ± 2% Weight per Gallon:10.48 lbs Flash Point:NA Vehicle Type: 100% Acrylic Shelf Life:36 months unopened*The length of time SuperPaint Air Purifying Technology actively reduces odors and formaldehyde depends on the concentration, the frequency of exposure and the amount of painted surface area.COMPLIANCEAs of 12/16/2020, Complies with:OTC YesOTC Phase II YesSCAQMD YesCARB YesCARB SCM 2007YesCanada YesLEED® v4 & v4.1 Emissions YesLEED® v4 & v4.1 V.O.C.YesEPD-NSF® Certified NoMIR-Manufacturer Inventory NoMPI®YesAPPLICATIONApply at temperatures above 50°F.No reduction needed.Brush:Use a nylon-polyester brush.Roller:Use a 3/8 to 3/4 inch nap polyester cover orsoft woven.For specific brushes and rollers, please referto our Brush and Roller Guide on sherwin-Spray—AirlessPressure2000 p.s.i.Tip.013-.017 inchAPPLICATION TIPSMake sure product is completely agitated(mechanically or manually) before use.Priming and application of two coats at therecommended film thickness can help wherehiding of a previous coating or application tonew drywall is a factor.SPECIFICATIONSBlock:1 coat ConFlex Block Filler^2 coats SuperPaint Air Purifying TechnologyDrywall:1 coat Drywall Primer Interior Latex2 coats SuperPaint Air Purifying TechnologyMasonry1 coat Loxon Concrete & Masonry Primer^2 coats SuperPaint Air Purifying TechnologyPlaster:1 coat Loxon Concrete & Masonry Primer^2 coats SuperPaint Air Purifying TechnologyWood, Composition Board:1 coat Premium Wall & Wood Primer^2 coats SuperPaint Air Purifying TechnologyIf the wood has bleeding (such as tannin or knot-holes),prime with Multi-Surface Primer.^These primers contain less than 50 grams per litre V.O.C.Other primers may be appropriate.When repainting involves a drastic colorchange, a coat of primer will improve thehiding performance of the topcoat color.SuperPaint®Air Purifying Technology Interior Acrylic Semi-GlossSURFACE PREPARATION WARNING! Removal of old paint by sanding,scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Existing peeled or checked paint should be scraped and sanded to a sound surface. Glossy surfaces should be sanded dull. Stains from water, smoke, ink, pencil, grease, etc. should be sealed with the appropriate primer-sealer. Recognize that any surface preparation short of total removal of the old coating may compromise the service length of the system.Caulking:Gaps between walls, ceilings, crown moldings, and other interior trim can be filled with the appropriate caulk after priming the surface. Drywall:Fill cracks and holes with patching paste/ spackle and sand smooth. Joint compounds must be cured and sanded smooth. Remove all sanding dust.Masonry, Concrete, Cement, Block:All new surfaces must be cured according to the supplier’s recommendations—usually about 30 days. Remove all form release and curing agents. Rough surfaces can be filled to provide a smooth surface. If painting cannot wait 30 days, allow the surface to cure 7 days and prime the surface with Loxon Concrete & Masonry Primer.SURFACE PREPARATIONMildew:Prior to attempting to remove mildew, it isalways recommended to test any cleaner on asmall, inconspicuous area prior to use. Bleachand bleaching type cleaners may damage ordiscolor existing paint films. Bleach alternativecleaning solutions may be advised.Mildew may be removed before painting bywashing with a solution of 1 part liquid bleachand 3 parts water. Apply the solution and scrubthe mildewed area. Allow the solution to remainon the surface for 10 minutes. Rinse thoroughlywith water and allow the surface to dry beforepainting. Wear protective eyewear, waterproofgloves, and protective clothing. Quickly washoff any of the mixture that comes in contact withyour skin. Do not add detergents or ammoniato the bleach-water solution.Plaster:Bare plaster must be cured and hard. T extured,soft, porous, or powdery plaster should betreated with a solution of 1 pint householdvinegar to 1 gallon of water. Repeat until thesurface is hard, rinse with clear water and allowto dry.Wood:Sand any exposed wood to a fresh surface.Patch all holes and imperfections with a woodfiller or putty and sand smooth.CAUTIONSFor interior use onlyProtect from freezing.Non-photochemically reactive.Before using, carefully read CAUTIONSon labelUse only with adequate ventilation. T o avoidoverexposure, open windows and doors or use othermeans to ensure fresh air entry during application anddrying. If you experience eye watering, headaches, ordizziness, increase fresh air, or wear respiratory protection(NIOSH approved) or leave the area. Avoid contact witheyes and skin. Wash hands after using. Keep containerclosed when not in use. Do not transfer contents toother containers for storage. FIRST AID: In case of eyecontact, flush thoroughly with large amounts of water.Get medical attention if irritation persists. If swallowed,call Poison Control Center, hospital emergency room, orphysician immediately. WARNING: This product containschemicals known to the State of California to causecancer and birth defects or other reproductive harm. DONOT TAKE INTERNALLY. KEEP OUT OF THE REACHOF CHILDREN.HOTW 12/16/2020 A88W00061 13 00FRC,SPCLEANUP INFORMATIONClean spills, spatters, hands and toolsimmediately after use with soap andwarm water. After cleaning, flush sprayequipment with compliant cleanup solventto prevent rusting of the equipment. Followmanufacturer’s safety recommendationswhen using solvents.113.12SGPro Industrial™Waterbased Alkyd Urethane Enamel Semi-Gloss B53-1150/2150 SeriesCHARACTERISTICSPro Industrial Waterbased Alkyd Urethane Enamel is a premium quality interior-exterior enamel formulated with a urethane modified alkyd resin system for high performance. It provides beauty and durability when applied to interior-exterior surfaces such as properly prepared drywall, wood, masonry and metal. It brings together the convenience and ease of use of a waterborne coating with the performance and coating characteristics of a traditional oil-based enamel.• Excellent washability & flow & leveling• Excellent touch up• Easy application & cleanup• Resistant to yellowing compared to traditional alkyds• Suitable for use in USDA inspected facilities For use on properly prepared:Steel, Galvanized & Aluminum, Drywall, Concrete and Masonry, and Wood.Finish: 50-70° @60° Color:Most colors Recommended Spreading Rate per coat:Wet mils: 4.0-5.0 Dry mils: 1.4-1.7 Coverage: 320-389 sq.ft. per gallon Theoretical Coverage:545 sq. ft. per gallon@ 1 mil dry Approximate spreading rates are calculated on volume solids and do not include any application loss.Note: Brush or roll application may require multiple coats to achieve maximum film thickness and uniformity of appearance.*************************,@50%RH: Drying, and recoat times are temperature, humidity, and film thickness dependent.@77°F To touch1-2 hours To recoat 4 hoursTinting with CCE only:Base oz. per gallon Strength Extra White0-6SherColor Deep Base4-12SherColor Ultradeep Base10-14SherColorExtra White B53W02151(may vary by color)V.O.C. (less exempt solvents):less than 50 grams per litre; 0.42 lbs. per gallonAs per 40 CFR 59.406 Volume Solids: 34 ± 2% Weight Solids:51 ± 2% Weight per Gallon:10.94 lb Flash Point:N/A Vehicle Type:Urethane modified alkyd Shelf Life:36 months, unopenedCOMPLIANCEAs of 03/10/2020, Complies with:OTC YesOTC Phase II YesSCAQMD YesCARB YesCARB SCM 2007YesCanada YesLEED® v4 & v4.1 Emissions NoLEED® v4 & v4.1 V.O.C.YesEPD-NSF® Certification NoMIR-Manufacturer InventoryNSF® CertificationNoMPI®NoAPPLICATIONTemperature:minimum50°F / 10°Cmaximum100°F / 37.8°Cair, surface, and materialAt least 5°F above dew pointRelative humidity:85% maximumThe following is a guide. Changes in pressures and tipsizes may be needed for proper spray characteristics.Always purge spray equipment before use with listedreducer. Any reduction must be compatible with theexisting environmental and application conditions.Reducer:WaterAirless Spray:Pressure2000 p.s.i.Hose1/4 inch I.D.Tip.013 - .017 inchFilter60 meshReduction Not recommendedBrush Nylon-polyesterRoller Cover1/4-1/2 inch wovenIf specific application equipment is listed above,equivalent equipment may be substituted.Apply paint at the recommended film thicknessand spreading rate as indicated on frontpage. Application of coating below minimumrecommended spreading rate will adverselyaffect coating performance.No painting should be done immediately after arain or during foggy weather.When using spray application, use a 50%overlap with each pass of the gun to avoidholidays, bare areas, and pinholes. Applycoating evenly while maintaining a wet edge toprevent lapping.SPECIFICATIONSSteel:1 coat Pro Industrial Pro-Cryl Primer2 coats Pro Industrial Waterbased Alkyd UrethaneAluminum and Galvanizing:1 coat Pro Industrial Pro-Cryl Primer2 coats Pro Industrial Waterbased Alkyd UrethaneConcrete Block (CMU):1 coat Pro Industrial Heavy Duty Blockfilleror Loxon Acrylic Block Surfacer2 coats Pro Industrial Waterbased Alkyd UrethaneConcrete-Masonry:1 coat Loxon Concrete & Masonry Primer (ifneeded)2 coats Pro Industrial Waterbased Alkyd UrethaneDrywall:1 coat ProMar 200 Zero V.O.C. Primer2 coats Pro Industrial Waterbased Alkyd UrethaneWood, exterior:1 coat Exterior Wood Primer2 coats Pro Industrial Waterbased Alkyd UrethaneWood, interior:1 coat Premium Wall & Wood Primer2 coats Pro Industrial Waterbased Alkyd UrethaneThe systems listed above are representative of theproduct’s use, other systems may be appropriate.Pro Industrial™Waterbased Alkyd Urethane Enamel Semi-GlossSURFACE PREPARATION WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.Do not use hydrocarbon solvents for cleaning. Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Existing peeled or checked paint should be scraped and sanded to a sound surface. Glossy surfaces should be sanded dull. Stains from water, smoke, ink, pencil, grease, etc. should be sealed with the appropriate primer/sealer. Recognize that any surface preparation short of total removal of the old coating may compromise the service length of the system.Iron & Steel - Minimum surface preparation is Hand T ool Clean per SSPC-SP2. Remove all oil and grease from surface per SSPC-SP1. For better performance, use Commercial Blast Cleaning per SSPC-SP6. Primer recommended for best performanceAluminum - Remove all oil, grease, dirt, oxide and other foreign material per SSPC-SP1. Prime the area the same day as cleaned. Galvanizing - Allow to weather a minimum of six months prior to coating. Solvent Clean per SSPC-SP1. When weathering is not possible, or the surface has been treated with chromates or silicates, first Solvent Clean per SSPC-SP1 and apply a test patch. Allow paint to dry at least one week before testing adhesion. If adhesion is poor, brush blasting per SSPC-SP16 is necessary to remove these treatments. Rusty galvanizing requires a minimum of Hand Tool Cleaning per SSPC-SP2, prime the area the same day as cleaned.Concrete Block - Surface should be thoroughly clean and dry. Air, material and surface temperatures must be at least 55°F (13°C) before filling. Use Pro industrial Heavy Duty Block Filler or Loxon Acrylic Block Surfacer. The filler must be thoroughly dry before topcoating.Masonry - All masonry must be free of dirt, oil, grease, loose paint, mortar, masonry dust, etc. Clean per SSPC-SP13/Nace 6/ ICRI No. 310.2R, CSP 1-3. Poured, troweled, or tilt-up concrete, plaster, mortar, etc. must be thoroughly cured at least 30 days at 75°F. Form release compounds and curing membranes must be removed by brush blasting. Brick must be allowed to weather for one year prior to surface preparation and painting. Prime the area the same day as cleaned. Weathered masonry and soft or porous cement board must be brush blasted or power tool cleaned to remove loosely adhering contamination and to get to a hard, firm surface. Apply one coat Loxon Conditioner, following label recommendations. Wood - Surface must be clean, dry, and sound. Prime with recommended primer. No painting should be done immediately after a rain or during foggy weather. Knots and pitch streaks must be scraped, sanded and spot primed before full coat of primer is applied. All nail holes or small openings must be properly caulked.SURFACE PREPARATIONPreviously Painted Surface - If in soundcondition, clean the surface of all foreign material.Smooth, hard or glossy coatings and surfacesshould be dulled by abrading the surface. Applya test area, allowing paint to dry one week beforetesting adhesion. If adhesion is poor, additionalabrasion of the surface and/or removal of theprevious coating may be necessary. Retestsurface for adhesion. If paint is peeling or badlyweathered, clean surface to sound substrate andtreat as a new surface as above. Recognize thatany surface preparation short of total removalof the old coating may compromise the servicelength of the system.Mildew- Prior to attempting to remove mildew, itis always recommended to test any cleaner on asmall, inconspicuous area prior to use. Bleach andbleaching type cleaners may damage or discolorexisting paint films. Bleach alternative cleaningsolutions may be advised.Mildew may be removed before painting bywashing with a solution of 1 part liquid bleach and3 parts water. Apply the solution and scrub themildewed area. Allow the solution to remain onthe surface for 10 minutes. Rinse thoroughly withwater and allow the surface to dry before painting.Wear protective eyewear, waterproof gloves, andprotective clothing. Quickly wash off any of themixture that comes in contact with your skin. Donot add detergents or ammonia to the bleach/water solution.PERFORMANCESystem Tested: (unless otherwise indicated)Substrate:SteelSurface Preparation:SSPC-SP10Finish:1 coat Waterbased Alkyd Urethane, 5 W.F.T.Adhesion:Method:ASTM D3359 method BResult:4BPencil Hardness:Method:ASTM D3363Result:4HFlexibility:Method:Method: ASTM D522,180°bend, 1/4” mandrelResult:PassDry Heat Resistance:Method:ASTM D2485Result:200°FBlock Resistance:Lab assessment ExcellentResistance to Yellowing:Lab assessment ExcellentNo painting should be done immediately after arain or during foggy weather.Do not paint on wet surfaces.Check adhesion by applying a test strip todetermine the readiness for painting.SAFETY PRECAUTIONSBefore using, carefully read CAUTIONS on label.Refer to the Safety Data Sheets (SDS) before use.FOR PROFESSIONAL USE ONLY.Published technical data and instructions aresubject to change without notice. Contact yourSherwin-Williams representative for additionaltechnical data and instructions.CLEANUP INFORMATIONClean spills, spatters, hands and toolsimmediately after use with soap and warmwater. After cleaning, flush spray equipmentwith compliant cleanup solvent to preventrusting of the equipment. Follow manufacturer’ssafety recommendations when using solvents.DANGER: Rags, steel wool, other wastesoaked with this product, and sanding residuemay spontaneously catch fire if improperlydiscarded. Immediately place rags, steel wool,other waste soaked with this product, andsanding residue in a sealed, water-filled, metalcontainer. Dispose of in accordance with localfire regulations.HOTW 03/10/2020 B53W01153 09 39FRCThe information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company. Such information and recommendations set forth herein are subject to change and pertain to the product offered at the time of publication. Consult your Sherwin-Williams representative or visit to obtain the most current version of the PDS and/or an SDS.。

ICHQ1A中文版

人用药品注册技术要求国际协调会ICH三方协调指导文件ICH Q1A 新原料药和制剂的稳定性试验第二修订版，第四阶段文本2003年2月6日发布根据ICH进程，本指导文件由相应的ICH专家工作组提出，并提交给管理当局征询过意见。

在ICH进程第四阶段，最后的草案推荐给欧盟、日本和美国当局采纳。

文件历程原编码历程日期新编码2005年11月Q1 指导委员会批准作为第二阶段草案发布，对外征求意见。

1992年9月16日Q1Q1A 指导委员会批准作为第四阶段草案推荐给ICH三方的法规机构采纳。

Q1被重新定名为Q1A。

1993年10月27日Q1AQ1A(R) 第一次修订文本得到指导委员会批准，并作为第二阶段草案对外征求意见。

1999年10月7日Q1A(R1)Q1A(R) 第一次修订文本得到指导委员会批准，并作为第四阶段草案推荐给ICH三方的法规机构采纳。

2000年11月8日Q1A(R1)目前第四阶段文本Q1A(R2) 第二次修订文本得到指导委员会的批准，直接进入第四阶段而无需对外征求意见。

此文本包含了因采纳Q1F（Ⅲ和Ⅳ气候带注册申请的稳定性数据包）所引起的改变，并推荐给ICH三方的法规机构采纳。

2003年2月6日Q1A(R2)新原料药和制剂的稳定性试验修订说明本说明的目的是概括由于采用了ICH Q1F“Ⅲ和Ⅳ气候带注册申请的稳定性数据包”而使Q1A(R)产生的变更。

这些变更如下：1．在下面的章节中将中间的储存条件从温度30℃±2℃/相对湿度60%±5%改变为温度30℃±2℃/相对湿度65%±5%：● 2.1.7.1 原料药-储存条件-一般情况● 2.2.7.1 制剂-储存条件-一般情况● 2.2.7.3 在半透性容器中包装的制剂● 3 术语-“中间试验”2．在下面的章节中可以用温度30℃±2℃/相对湿度65%±5%代替温度25℃±2℃/相对湿度60%±5%作为长期稳定性试验的储存条件：● 2.1.7.1 原料药-储存条件-一般情况● 2.2.7.1 制剂-储存条件-一般情况3.对于长期稳定性试验的储存条件，在温度25℃±2℃/相对湿度40%±5%的基础上增加了温度30℃±2℃/相对湿度35%±5%。

Avonade 供应商指南说明书

The Supplier’s Guide to Invoicing AvanadeDear Supplier,Thank you for providing goods or services to Avanade. This guide contains important information about: ∙Establishing and maintaining your Avanade supplier profile;∙Special instructions for purchase order invoices;∙Preparing invoices for Avanade;∙Submitting invoices to Avanade;Make sure the details we have on file remain current. Please notify Avanade immediately by contacting **************************if there are any changes to the following:▪Mailing address;▪Purchase order receipt email address;▪Contact information;▪Bank information;▪Phone or fax.It is very important when supplying goods or services to Avanade, to do so only upon receipt of an official Purchase Order (PO). At the discretion of Avanade, goods or services received without an official purchase order would risk non-payment, unless an alternative arrangement has already been agreed with our procurement function. You can contact Avanade Procurement at *****************.Avanade’s official Purchase Orders will be sent via email notifications from Avanade’s procurement tool, Ariba Buyer, bearing the sender’s address: ********************************. Please ensure you are able to receive emails from this address accordingly.Other special instructions▪If you are providing goods and services to Avanade under more than one Purchase Order, you must invoice for each separately. Only one Purchase Order can be referenced per invoice.▪The format of the invoice must match the format of the Purchase Order. The following guidelines should be observed:o Reference the appropriate purchase order line item number for each line item on the invoice;o For goods, the total for each line must represent the extended amount for that good;o Charge for services and expenses must be itemized on separate lines;o Always review the ‘comments’section on the Purchase Order for additional processing instructions;o Always quote the Purchase Order number (which starts with 45XXXXXXXX).Please do not:o Mark the purchase order number with a highlighter as this affects the quality of our invoice scanning;o Handwrite the Purchase Order numbers on the invoice (where possible);o Quote the Purchase Requisition number (which starts with PRXXXXXX).When preparing invoices, please ensure you include the following information:▪Title ‘Tax Invoice’ prominently displayed;▪Company’s full legal name and address;▪Correct Avanade Billing Entity Name;▪Correct Avanade address;▪Name of the Avanade contact who requested the goods or services (in email format preferably). The contact name needs to be mentioned above the Avanade Address (Note: this employee will be asked to confirm receipt of goods or services and verify the accuracy of the invoice);▪Contact details (i.e. email and phone) and name of your accounts receivable representative;▪Supplier tax invoice number or applicable reference number;▪Invoice date;▪Avanade Purchase Order number beginning with 45XXXXXXXX where the goods or services are provided against a purchase order;▪Itemized description and quantity of the goods or extent of services that were supplied or rendered;▪GST number if your entity is a registered company for GST▪Total amount due along with GST, where applicable▪Avanade’s standard payment terms are 30 days from the date of invoice. Please ensure that thesepayment terms are stated on the invoice unless alternative payment terms have been agreed in writing with Avanade Procurement▪Complete banking details for Avanade to pay the invoice:o BSBo account numbero account nameo sort codeo swift codeo or other preferred payment method (e.g. cheque).Any incomplete information may result in delay in payment from Avanade.If you are issuing a credit note against a cancelled invoice, quote the corresponding invoice reference against which the credit note is being issued.Kindly submit your invoices within five business days from the invoice date. All invoices should be sent as a soft copy (in a non-manipulative format, e.g. PDF, TIF, JPEG) directly to **********************************.Soft copies will assist in reducing delays in processing and payment, therefore it is highly recommended you send soft copies of invoices to the above email address rather than hard copies.Alternatively you can post hard copy invoices to the following mailing address:Avanade Asia Pte Ltd250 North Bridge Road#33-00 Raffles City TowerSingapore 179101For more information and assistance regarding your Avanade Supplier Profile, invoice or payment processing or purchase orders, please contact **************************.Alternatively, our customer service representatives are available Monday-Friday from 8:30am –5:30pm to provide you with assistance on +65 6410 7743 (option 4, option 5).Kind regardsAvanade ProcurementAvanade is committed to conducting its business free from unlawful, unethical or fraudulent activity. Suppliers are expected to act in a manner consistent with the ethical and professional standards of Avanade set forth in the Avanade Code of Business Ethics, including reporting promptly unlawful, fraudulent or unethical conduct. Avanade has established reporting mechanisms and prohibits retaliation or other adverse action for reporting such conduct.。

Helena Chemical Company 产品说明书

PRECAUTIONARY STATEMENTCAUTIONBEFORE USING THIS PRODUCT, READ ALL PRECAUTIONS, DIRECTIONS FOR USE, CONDITIONS OF SALE –LIMITED WARRANTY AND LIMITATIONS OF LIABILITY AND REMEDIES.Avoid contact with formulated product. Do not take internally. Avoid contact with or inhalation of the spray mist. If product is being mixed with pesticides and/or spray adjuvants, follow all precautionary statements on the accom-panying product(s) labeling.WHAT TO DO IN CASE OF CONTACT:IF SWALLOWED:Give large amounts of water and get medical attention immediately. If vomiting occurs, keep head lower than hips to prevent aspiration.IF IN EYES:May cause irritation. Wash eyes immediately with large amounts of water. Get medical atten-tion if irritation persists.IF ON SKIN:May cause mild irritation. Remove contaminated clothing and wash exposed area with large amounts of water. Obtain medical attention if irritation persists.IF INHALED:May cause irritation. Move person to fresh air and obtain medical attention if irritation persists.If there is contact made with a spray solution containing pesticides, follow the “Statement of Practical Treatment/First Aid” on the pesticide label.GENERAL INFORMATIONNucleus ®0-0-21is a highly concentrated water-based solution of potash and oxidized sulfur useful in the correc-tion of nutritional deficiencies in plants. The unique formulation of Nucleus ®0-0-21provides a non-corrosive liquid that is stable at cold temperatures. Applications of Nucleus ®0-0-21through mixing, application, and irrigation equipment may reduce the rate and degree of corrosion that occurs when this equipment is exposed to fertilizer solu-tions. When used as directed this product does not supply all nutrients required by plants and is to supplement a soil fertility program based on soil tests.APPLICATION AND MIXING GUIDEApplication rates for general use are 2–6 gallons per acre.TURF:Apply 2 to 10 fl. ounces per 1,000 sq. ft. using 2 to 5 gallons of water per 1,000 sq ft. Use lower rate during summer applications. Apply as needed.MIXING:Nucleus ®0-0-21provides a neutral or slightly acidic pH value when diluted with water. This characteristic makes it compatible with most pesticides. In any mixing operation, Nucleus ®0-0-21should be introduced in the follow-ing sequence:1. Water2. Nucleus ®0-0-213. Other Fertilizer Products4. Pesticides5. Spray AdjuvantsCompatibility tests are always recommended prior to preparing a spray mixture of Nucleus ®0-0-21with other products.STORAGE AND DISPOSAL Keep container tightly closed and do not allow water to be introduced into it. Store in a dry place. Temperatures below 25°F may result in product crystallization. The product will readily reconstitute, however, with warmer tem-peratures and gentle agitation of the container.Do not contaminate water sources by cleaning of equipment or disposal of spray waste.Dispose of empty containers by triple rinsing with detergent solution or puncture and discard empty containers in a landfill in accordance with current local, state, and federal regulations.。

Chiralpak ADH-中文使用手册

洗脱类型
反相
填料粒径
5 µm 10µm

NA NA
直链淀粉衍生物
纤维素衍生物
纤维素衍生物
冠醚

3 µm
配基交换

北京慧德科技有限责任公司
d e
柱压指色谱柱压降，即接上柱子后系统的压力与未接柱子时系统压力的差值。 50 Bar 之内是有助于柱子最长寿命的理想值，在 100 Bar 以内柱子仍是安全的。
色谱条件： 0 A – 流动相
烷烃n/ 异丙醇 CHIRALPAK®AD-H 150 250 250 250 x x x x 4.6 mm ID 4.6 mm ID 10 mm ID 20 mm ID
r CHIRALPAK® AD-H柱能使用 100％的甲醇或乙腈，然而一旦使用了这类极性流动相，就只能一直使用极性流动相。
如果要将正己烷换成甲醇或乙腈，或者要换成不同的极性溶剂，强烈建议使用 100％的异丙醇作为过渡溶剂，过渡流速小一些（异丙醇粘度较大）。 s t 乙腈中的醇含量（异丙醇除外）超过 15％，会损伤固定相。其它种类的醇（异丙醇，正丁醇，异丁醇等）也能使用，但选择性不同，并且浓度不能超过 15％
u v
可用于分离伯胺样品可用于离伯胺醇样品
色谱柱保养：

强烈建议使用保护柱。样品尽量溶解在流动相中，并用 0.5 μm 滤膜过滤。如果要保存色谱柱超过一周，需将色谱柱里的溶剂置换成保存溶剂（正己烷/异丙醇 90：10）。对于专门用极性溶剂作为流动相的色谱柱，用不含酸碱添加剂的极性溶剂冲洗色谱柱。
CHIRALPAK® 是大赛璐化学工业有限公司的注册商标。

VITSON产品说明书中文英文

深圳市慧拓鑫科技有限公司Shenzhen Hui Tuo Xin Technology Co., Ltd.产品资料Product information1、TOP电源防雷箱系列（TOP Power lightning protection box series） (1)2、TP 限压型电源防雷模块系列（TP Voltage limiting type power supply lightning protection module series） (8)3、TP直流电源防雷模块系列（TP DC power supply lightning protection module series） (14)4、TCP电源未端精细防护防雷器系列（TCP Power supply terminal fine protective lightning arrester series） (20)5、TDC 电源插座(TDC Power supply lightning protection socket series) (25)6、TV 视频防雷器系列(TV Video arrester series) (30)7、T 视频/射频防雷器系列(T Video / RF lightning arrester series) (36)8、TC控制线路防雷器系列( TC Control circuit lightning arrester series) (40)9、10/100M网络线路防雷器(10/100M Network circuit lightning arrester) (44)10、通讯专线防雷器(Communication line lightning arrester) (49)11、TT天馈线路防雷器系列(TT Antenna line arrester series) (53)1、TOP电源防雷箱系列（TOP Power lightning protection box series）产品介绍Product introductionTOP电源防雷箱系列依据IEC标准设计，8/20波形最大通流容量20KA-100KA，能对电源系统的浪涌电压进行有效的钳制，电源B、C、D级产品均具备。