Bai tap 01~06 NLKT
Moxa ioLogik 2500 系列智慧乙太網路遠端 I O 裝置說明说明书
ioLogik2500系列具備Click&Go Plus邏輯的智慧乙太網路遠端I/O特色與優點•具備Click&Go Plus控制邏輯的前端智慧，多達48項規則•與MX-AOPC UA伺服器進行的主動通訊•使用MX-AOPC UA日誌軟體自動補充斷線週期資料•內建4埠非網管型交換器，用於連接乙太網路裝置•用於菊鏈連接的I/O擴充連接埠，可連接多達8個ioLogik E1200裝置•三合一串列埠：RS-232、RS-422或RS-485•支援SNMP v1/v2c/v3•使用Windows或Linux版MXIO程式庫簡化I/O管理•提供寬操作溫度型號，適合-40至75°C（-40至167°F）環境認證簡介ioLogik2500智慧乙太網路遠端I/O裝置採用獨特的硬體和軟體設計，因此成為各種工業資料擷取應用的理想解決方案。
ioLogik2500的硬體設計包括4埠非網管型乙太網路交換器和2個串列埠，能夠無縫連接至各種現場裝置。
其中的一個乙太網路連接埠可用於連接8個菊鏈ioLogik E1200擴充模組，藉以提供100多個通道。
ioLogik2500做為「主機」裝置，使用Click&Go Plus邏輯控制整個I/O陣列。
最重要的是，只需要IP即可將整個I/O陣列連接至您的網路，為IP位址數量不足的工業現場提供完美的解決方案。
免程控Click&Go Plus™邏輯Click&Go Plus™控制邏輯支援多達48個規則和8個條件/動作。
此外，其圖形化使用者介面還提供3個邏輯閘和3個多層，協助您建構更強大、更有效率的IO解決方案。
您完成Click&Go Plus™邏輯規則的設定後，IOxpress易於使用的模擬功能可用於在將Click&Go Plus™規則上傳到您的線上裝置之前發現其中的潛在錯誤。
多協定資料集中器透過支援多種協定，ioLogik2500提高收集現場資料並傳送到上層系統的效率。
Leviton ATLAS-X1 Cat 6A Component-Rated UTP QUICKP
Page 1 of 2APPLICATIONThe ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack supports 10GBASE-T networks. The jack is part of a complete ATLAS-X1 Cat 6A UTP system, ideal for the most demanding mission-critical network applications. The connector supports emerging technologies and will easily adapt to network trends.SPECIFICATIONThe jack shall meet or exceed the requirements for channel and component-level electrical transmission performance as described in ANSI/TIA-568.2-D (Cat 6A), ISO/IEC11801-1 (Class E A ), and EN 50173-1 (Class E A ). The jack shall be compliant with ANSI/TIA-1096-A, c(UL)us Listed, and be independently verified for electrical transmission performance and power delivery. The jack body shall be made of die-cast zinc and all plastic components shall be made of high-impact, fire-retardant plastic rated UL 94V-0. The jack shall support tool-free termination and re-termination and shall not require a specialized termination tool. The jack wiring shall be universal to accommodate T568A and T568B wiring schemes. The jack shall be available in 13 colors; more than established by the ANSI/TIA-606-C standard. The jack shall be offered in standard and shuttered styles and select jacks shall be supplied with interchangeable icons. The jack shall be compliant with IEEE 802.3 PoE Type 1, 2, 3, 4 (100 watts max).DESIGN CONSIDERATIONS• Use in any QUICKPORT™ housing to support Cat 6A UTP connectivity in surface-mount, flush-mount, or modular furniture outlets and field-configurable panels• Can be used in conjunction with other QUICKPORT snap-in modules for voice/data/video applications over UTP , coax, and fiber• To identify ports, use different colored modules andicons for each application (full selection of ANSI/TIA-606 compatible colors, 13 available)• Robust housing and shutter protects the jack in harsh environmentsATLAS-X1™ Cat 6A Component-Rated UTP QUICKPORT™ Jack6AUJK-xx6, ICONS-ICxFEATURES• Independently tested and guaranteed to exceed all component, permanent link, and channel margins• Patented Retention Force Technology™ (RFT) protects against tine damage and increases system longevity • For Power over Ethernet, RFT maintains contact force between plug and jack, preventing arcing from intermittent disconnects• Unique design supports tool-free termination andre-termination and requires no specialized termination tool • Short jack design supports a wider range of applications (e.g. shallow boxes, enclosures, bend radius, etc.)• Terminates from 26 to 22 AWG solid or stranded conductors for use on various cable types• Robust IDCs can withstand 20 re-termination cycles and jack contacts are tested for 750 plug-mating cycles to ensure system longevity• Available in 13 ANSI/TIA-606-C compatible colors • Tested and approved for use in air-handling spaces (plenum rating) in accordance with UL Standard 2043• Select jacks available with interchangeable icons (voice, data, A/V, blank) for easy ID• Jack with internal shutter protects against dust and debris • Solid metal body dissipates 53% more heat than plastic, minimizing damage from excess heat in PoE applications • Tine geometry prevents arcing damage where plug and jack make contactSTANDARDS & REGULATIONS• ANSI/TIA-568.2-D (Cat 6A)• ISO/IEC 11801-1 (Cat 6A)• EN 50173-1 (Cat 6A)• ANSI/TIA-1096-A (formerly FCC Part 68)• IEC 60603-7 (includes IEC 60512-5-2)• IEC 60512-99-002• IEEE 802.3 PoE Type 1, 2, 3, 4 (100 watts max)• Cisco UPOE, UPOE+ (90 watts max)• Power over HDBaseT™ PoH (95 watts max)• c(UL)us Listed (UL 1863)• UL 2043 Plenum Certified • RoHS 3• ETL verified to meet the IEC 60512-99-002 standard for support of IEEE 802.3 Type 4 PoE (100 watt) applicationsCOUNTRY OF ORIGINUSA and Mexico (Contact Customer Service for details)6AUJK-xx6, ICONS-ICxUSANetwork Solutions Headquarters +1 (800) 722 2082 *******************Leviton Berk-Tek Cable : +1 (800) 237 5835 ************************Asia Pacific+852 3620 2602********************Canada+1 (800) 461 2002**********************Europe+44 (0) 1592 772124 **********************Latin AmericaMX: +52 (55) 2128 6286 LATAM: +52 (55) 2333 5963 *********************Middle East & Africa +971 (4) 247 9800 *******************NETWORK SOLUTIONS PRODUCTS ARE AVAILABLE WORLDWIDE IN OVER 100 COUNTRIES. VISIT US ONLINE AT /NS TO LEARN MORE.Page 2 of 2For further support information, visit /ns/support6AUJK-xx6, ICONS-ICx6AUJK-xx6, ICONS-ICxMECHANICAL SPECIFICATIONSDimensions:See belowMaterials: Jack Body: Die-cast zincSpring-Wire Contacts: High quality, copper-based alloy, plated with 50 microinches of gold for lowest contact resistance andmaximum life Temp. (Storage):Temp. (Installation): Temp. (Operating):Humidity (Max.):WARRANTY INFORMATIONFor Leviton product warranties, go to /ns/warrantyPART NUMBERDescriptionStandard Jack Jack with Shutter GREENPACK™12-Pack Standard Jack ATLAS-X1™ Cat 6A Component-Rated UTP QUICKPORT™ Jack, white 6AUJK-RW66AUJK-SW66AUJK-CW6ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, light almond 6AUJK-RT66AUJK-ST6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, ivory 6AUJK-RI66AUJK-SI6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, yellow 6AUJK-RY66AUJK-SY6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, orange 6AUJK-RO66AUJK-SO6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, crimson 6AUJK-RC66AUJK-SC6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, dark red 6AUJK-RR66AUJK-SR6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, purple 6AUJK-RP66AUJK-SP6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, blue 6AUJK-RL66AUJK-SL66AUJK-CL6ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, green 6AUJK-RV66AUJK-SV6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, gray 6AUJK-RG66AUJK-SG6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, black6AUJK-RE66AUJK-SE66AUJK-CE6ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, brown6AUJK-RB66AUJK-SB6—Green (V)Blue (L)Purple (P)Crimson (C)Dark Red (R)Orange (O)Yellow (Y)Black (E)Gray (G)Ivory (I)Light Almond (T)Brown (B)Color-matched icons (ICONS-ICx) can be ordered separately in 72-quantity packs.x = icon color。
PComm Lite - 串口通信工具说明书
PComm Lite - Serial Communication Tool for Windows ReleaseNotesSupported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• Different versions of PComm Lite 2000 can be installed on the same PC.• Performance Analyzer can store previous configurations of the COM port list.• PComm Terminal users can set history depth in ANSI and VT100 mode.• PComm Terminal could not locate system file ws2_32.dll in Windows 2000 and Windows XP.• In the Send Pattern function, an individual port cannot be stopped but all ports can be stopped simultaneously.EnhancementsWindows 2000, Windows 7, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2,Windows Vista, Windows XPMultiport Serial Boards, Serial Device Servers, USB-to-Serial Converters• Added byte transmit/receive counter in PComm Terminal.• PComm Terminal supports pasting clipboard content to terminal.New FeaturesN/A• Terminal Emulator: Supports all serial products, including non-Moxa products.• Diagnostic Utility: Supports Moxa Multiport Serial Boards.• Monitor Utility: Supports Moxa Multiport Serial Boards.• Performance Analyzer: Supports Moxa Multiport Serial Boards, UPort Series, and NPort Series.• PComm Library: Supports all serial products, including non-Moxa products.Supported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• ncludes VC project example code for PComm library • Read method using RX_CHAR event.• Supports opening multiple COM ports.• Log files can be stored in a specified path/link.N/AEnhancementsWindows 2000, Windows 7, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2,Windows Vista, Windows XPUSB-to-Serial Converters, Multiport Serial Boards, Serial Device Servers• Supports Windows 2008/2008 R2 (x86/x64).• Supports HEX code display for dumb mode.• Supports linear baud rate configuration.• Supports send pattern for multiple COM ports.• Supports data file pattern.• Supports interval time between sending two patterns.• Supports network communication: TCP Server/Client, UDP.• Supports auto line wrap.• Supports customizing terminal size.• Supports DTR/DSR flow control configuration.• Supports Performance Analyzer.New FeaturesN/A• Terminal Emulator: Supports all serial products, including non-Moxa products.• Diagnostic Utility: Supports Moxa Multiport Serial Boards.• Monitor Utility: Supports Moxa Multiport Serial Boards.• Performance Analyzer: Supports Moxa Multiport Serial Boards, UPort Series, and NPort Series.• PComm Library: Supports all serial products, including non-Moxa products.Supported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• VT100 added "DEL" key support.• Modified all online help to HTML format.• PComm Lite supports up to COM1024.• Updated PComm.dll to fix ASCII tx causing VB program to hang if tx is held by CTS flow control.EnhancementsWindows 2000, Windows 7, Windows Server 2003, Windows Vista, Windows XPUSB-to-Serial Converters, Multiport Serial Boards, Serial Device Servers• Supports Windows Vista/7.New FeaturesN/A• Terminal Emulator: Supports all serial products, including non-Moxa products.• Diagnostic Utility: Supports Moxa Multiport Serial Boards.• Monitor Utility: Supports Moxa Multiport Serial Boards.• Performance Analyzer: Supports Moxa Multiport Serial Boards, UPort Series, and NPort Series.• PComm Library: Supports all serial products, including non-Moxa products.Supported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• PComm Terminal display performance.• PComm Terminal status bar display problem.• PComm Terminal display problem with Moxa UC Series/EtherDevice/W2004 console.EnhancementsWindows 2000, Windows Server 2003, Windows XPUSB-to-Serial Converters, Multiport Serial Boards, Serial Device Servers• Utilities support Moxa MSB x64 driver.• PComm Library supports Windows x64 Edition (AMD64, EM64T). For cross development, x86 & x64library will both be installed.New FeaturesN/A• Terminal Emulator: Supports all serial products, including non-Moxa products.• Diagnostic Utility: Supports Moxa Multiport Serial Boards.• Monitor Utility: Supports Moxa Multiport Serial Boards.• Performance Analyzer: Supports Moxa Multiport Serial Boards, UPort Series, and NPort Series.• PComm Library: Supports all serial products, including non-Moxa products.。
TekVPI Interface Adapter TPA-BNC 数据手册说明书
TekVPI™Interface AdapterTPA-BNC DataSheetFeatures &Bene fitsEnables Existing TekProbe ®Products to Connect to the TekVPI™Probe Interface of the New DPO7000and DPO4000Series Oscilloscopes An Easy-to-use Plug-in Adapter to the Oscilloscope’s TekVPI Interface Provides Necessary Power,Communication,and Offset Control as Needed by the Attached TekProbe ProductProvides Overcurrent and Thermal Overload Protection for the Attached TekProbe ProductProvides an LED Probe Status Indicator which Identi fies that the Probe has Powered-up SuccessfullyApplicationsAdapts Existing TekProbe ®Probe Types for Application with TekVPI™OscilloscopesTekVPI™Interface AdapterTPA-BNC Adapter enables existing TekProbe ®interface products(active,differential,high-voltage,current,and optical probes)to be used with Tektronix’newest generation of DPO7000and DPO4000SeriesOscilloscopes which feature the new TekVPI™probe interface architecture.Existing TekProbe-BNC probe types simply plug into the TPA-BNC adapter which is then plugged directly into any TekVPI probe channel of the DPO7000and DPO4000Series oscilloscopes.The TPA-BNC adapter recognizes and supplies the necessary power and serial communication and offset control as used by the connected TekProbe product accessory.Note:Tektronix probe types using a BNC connection,or a BNC connection with a single analog encoding pin for attenuation factor detection connect directly to the oscilloscope’s TekVPI probe interface and do not require a TPA-BNC adapter.TekProbe ®InterfaceTekProbe is a probe interface architecture introduced in 1986,and used on many earlier models of Tektronix oscilloscopes including the TDS300,TDS400,TDS500,TDS600,TDS700,TDS3000/B,TDS5000/B,and TDS7000Series.In addition to coupling the signal from the probe to the oscilloscope,the TekProbe interface provides power and offset control to active probes.It also allows the oscilloscope to sense the probe’s attenuation scale factor and/or probetype.Data SheetCharacteristicsBandwidth–DC to>3GHz.VSWR–<1.23:1up to3GHz.RF Insertion Loss–<0.25dB.Delay Time–245ps.Maximum Input Signal Voltage–42V pk-pk,30V RMS,60VDC.Physical CharacteristicsDimensions mm in.Height43 1.694Width30.5 1.200 Length62.2 2.449Weight kg lb. Shipping0.451Power RequirementsTPA-BNC is powered directly from DPO7000and DPO4000Series Oscilloscopes,using TekVPI probe interface.EnvironmentalTemperatureOperating–0°C to+50°C.Nonoperating–-40°C to+75°C.HumidityOperating–5%to95%Relative Humidity(RH)up to+30°C;5%to85%RH above +30°C up to+50°C,noncondensing.Nonoperating–5%to95%Relative Humidity(RH)up to+30°C;5%to85%RH above+30°C up to+75°C,noncondensing.AltitudeOperating–Up to3,000m(10,000ft.).Nonoperating–Up to15,240m(50,000ft.).RegulatoryCompliance Labeling–WEEE(European Union).Standard WarrantyOne year parts and labor.Recommended OscilloscopesDPO7000and DPO4000Series Oscilloscopes with TekVPI probe interface. Ordering InformationTPA-BNCTekVPI™Interface Adapter to TekProbe-BNC ProbesIncludes:User manual(071-1689-xx).Service OptionsOpt.C3–Calibration Service3years(initial certification,plus2calibrations). Opt.C5–Calibration Service5years(initial certification,plus4calibrations). Opt.D3–Test Data on delivery and with future calibrations.Must be ordered with Opt.C3.Opt.D5–Test Data on delivery and with future calibrations.Must be ordered with Opt.C5.Opt.R3–Repair Service.Repair warranty extended to cover3years.Opt.R5–Repair Service.Repair warranty extended to cover3years.Product(s)are manufactured in ISO registered facilities.TekVPI™Interface Adapter—TPA-BNC3Data Sheet Contact Tektronix:ASEAN/Australasia(65)63563900Austria+41526753777Balkans,Israel,South Africa and other ISE Countries+41526753777Belgium078160166Brazil+55(11)40669400Canada1(800)661-5625Central East Europe,Ukraine,and the Baltics+41526753777Central Europe&Greece+41526753777Denmark+4580881401Finland+41526753777France+33(0)169868181Germany+49(221)9477400Hong Kong(852)2585-6688India(91)80-42922600Italy+39(02)250861Japan81(3)6714-3010Luxembourg+44(0)1344392400Mexico,Central/South America&Caribbean52(55)54247900Middle East,Asia,and North Africa+41526753777The Netherlands09002021797Norway80016098People’s Republic of China86(10)62351230Poland+41526753777Portugal800812370Republic of Korea82(2)6917-5000Russia&CIS+7(495)7484900South Africa+27112068360Spain(+34)901988054Sweden020*******Switzerland+41526753777Taiwan886(2)2722-9622United Kingdom&Ireland+44(0)1344392400USA1(800)426-2200For other areas contact Tektronix,Inc at:1(503)627-7111Updated30October2008For Further Information.Tektronix maintains a comprehensive,constantly expandingcollection of application notes,technical briefs and other resources to help engineers workingon the cutting edge of technology.Please visit Copyright©Tektronix,Inc.All rights reserved.Tektronix products are covered by U.S.and foreign patents,issued and rmation in this publication supersedes that in all previously published material.Specification and price change privileges reserved.TEKTRONIX and TEK are registered trademarks ofTektronix,Inc.All other trade names referenced are the service marks,trademarks,or registered trademarksof their respective companies.05Jun200951W-19077-1。
PreSonus AudioBox USB 2x2 音频接口说明书
©2021 PreSonus Audio Electronics, Inc. All Rights Reserved. AudioBox USB, Capture, CoActual, EarMix, Eris, FaderPort, FireStudio, MixVerb, Notion, PreSonus, PreSonus AudioBox, QMix, RedLightDist, SampleOne, Sceptre, StudioLive, Temblor, Tricomp, WorxAudio, and the Wave Logo are registered trademarks of PreSonus Audio Electronics, Inc. Studio One is a registered trademark of PreSonus Software Ltd.Mac, macOS, iOS, and iPadOS are registered trademarks of Apple, Inc., in the U.S. and other countries. Windows is a registered trademark of Microsoft, Inc., in the U.S. and other countries. USB Type-C and USB-C are registered trademarks of USB Implementers Forum.Other product names mentioned herein may be trademarks of their respective companies. All specifications subject to change without notice... except the recipe, which is a classic.Baton Rouge • USA Revelator io242-channel audio interface for streamers and podcasters Quick Start GuideRevelator io24Interfaz de audio de 2 canales para streamers y podcasters Guía de arranque rápidoRevelator io242-Kanal-Audio-Interface für Streamer und Podcaster KurzanleitungRevelator io24Interface audio à deux canaux pour les streameurs et les podcasteurs Guide de prise en mainRevelator io24为流媒体工作者和播客设计的双通道音频接口快速启动指南Part# 70-12000164-BBasic functions • Funciones básicas • Grundlegende Funktionen • Fonctions de base • 基础功能Press channel 1 or 2 button to select channel. Press encoder to cycle through settings. Turn encoder to change chosen setting.Pulse el botón canal 1 ó 2 para seleccionar el canal. Pulse el encoder para desplazarse por los ajustes. Gire el encoder para cambiar el ajuste elegido.Channel 1 oder 2 drücken, um den Kanal auszuwählen. Endlosregler drücken, um durch die Einstellungen zu blättern. Endlosregler drehen, um die ausgewählte Einstellung zu ändern.Pressez la touche de canal 1 ou 2 pour sélectionner le canal. Pressez l’encodeur pour parcourir les réglages. Tournez l’encodeur pour modifier le réglage choisi.按下 channel 1 或 2 按钮进行轨道选择。
印度尼西亚语基础教程1
印度尼西亚语基础教程Pelajaran Ke-1印度尼西亚语字母表单词Pelajaran Ke-2Pelajaran Ke-3句型Siapa dia ? Dia mahasiswa.Siapa itu? Itu Li Li.Siapa ini? Ini paman.Siapa itu? Itu papa.Pelajaran Ke-4单词句型Buku apa itu? Itu buku ekonomi.Buku siapa ini? Ini buku dia.Diktat apa itu?Itu diktat bahasa Indonesia.Diktat siapa ini?Ini diktat teman saya.句型练习1）用tamu, tidur, mandi, makan, dapur回答：Kamar apa itu?Itu kamar .... .2）用tamu, tidur, baca, makan 回答Ruang apa itu?Itu ruang ... .3）用bahasa, ekonomi, politik, tata bahasa 回答Ilmu apa itu?Itu ilmu ... .4）用rakyat, dasar, menengah, Tionghoa, Indonesia 回答Sekolah apa itu?Itu sekolah ... .5）用diktat 替换buku:Apa itu? (Apakah itu?)Itu buku.Buku apa itu? (Buku apakah itu?)Itu buku tata bahasa.Buku tata bahasa siapa (siapakah) itu?Itu buku tata bahasa saya.Pelajaran Ke-5句型Itu diktat baru?Bukan. Itu bukan diktat baru.Ya, itu diktat baru.Itu kamar baru?Bukan, Itu bukan kamar baru.Ya, itu kamar baru.Pelajaran Ke-61. 辅音p x f v 的发音部位和发音方法2. 接续词音节的划分3. 外来辅音组合印度尼西亚语辅音表语音部分词汇Pelajaran Ke-7SAYA MAHASISWADIALOGSelamat pagi!Selamat pagi!Saya Ma Ning. Saya mahasiswa.Itu siapa?Itu teman saya. Dia mahasiswa juga.Silakan masuk!Saudara mahasiswa Universitas Peking?Ya, saya mahasiswa Universitas Peking.Dia mahasiswa Universitas Peking juga?Ya, dia mahasiswa Universitas Peking juga.Mana lencananya?O, dia belum punya lencana. Dia mahasiswa baru. Baru datang kemarin. Silakan duduk!，Terima kasih.Saudara belajar apa?Saya belajar bahasa Indonesia. Dia belajar bahasa Tionghoa .Ini kamar saudara?Bukan, kamar ini bukan kamar saya. Ini kamar teman saya. Kamar ini bersih.Ya, kamar teman saya ini bersih.Ini buku apa?Ini buku tata bahasa Tionghoa. Buku ini buku teman saya.O, ya, teman saudara belajar bahasa Tionghoa, ya!Ya, kami sama-sama belajar bahasa.TEKS1、Kalimat Berita. Subjek+PredikatIni bambu. Ini lampu. Itu batu.Dia guru. Kamu murid. Beliau mahaguru.Abik gemuk. Paman kurus. Ibu tinggi.Buku ini baru. Kamar itu bersih.Pena ini baik. Orang itu kurus.Itu diktat ilmu ekonomi. Ini kalimat bahasa Tionghoa.Ini kamar mahasiswa tingkat satu.Orang tua itu ayah saya. Rumah tinggi itu rumah kami.Mobil baru itu mobil beliau.Ibu kami dokter. Paman mereka mahaguru.Kakak kalian mahasiswa.Sepatu ini kepunyaan saya. Sepatu ini saya punya.Lencana ini kepunyaan adik. Lencana ini adik punya.Kertas itu kepunyaan nyonya. Kertas itu nyonya punya. 2、kalimat tanya.Ini apa? Ini mata. Itu apa? Itu batu.Apa ini? Ini betis. Apa itu? Itu pipa.Sekolah apa itu? Itu sekolah menengah.Bahasa apa itu? Itu bahasa Indonesia.Itu siapa? Itu Li Li. Ini siapa? Ini paman.Siapa itu? Itu kakak. Siapa ini? Ini teman saya.Pisau siapa itu? Itu pisau saya.Topi siapa itu? Itu topi adik.Saudara siapa? Saya guru.Nona siapa? Saya Li Li.Siapa tuan itu? Tuan itu mahaguru.Siapa orang itu? Orang itu pamannya.Ini pintu? Ya, ini pintu.Itu jendela? Bukan, itu bukan jendela.Dia guru? Ya, dia guru.Nona itu mahasiswa? Bukan nona itu bukan mahasiswa.Kamar ini bersih? Ya, kamar ini bersih.Adik saudara gemuk? Tidak, adik saya tidak gemuk.Rumah itu tinggi? Ya, rumah itu tinggi.Pena ini baik? Tidak, pena ini tidak baik. DAFTAR KATAPENJELA SAN1. ketajuh ke 用在基数词的前面表示次序,等于汉语的“第”，ke 加基数词变成序数词，ke 要与基数词连写。
Eliot tape ET201-TK TAPE Standard
ET 201WSB-M3G205-AES-XU5T-1A303-AA Type BMSCH 91M5204BlackHigh Temp Dry Vinyl TapeEconomical Engine Compt.Wrap 105° CET 301ESB-M3G40-A MSDC 13A M4515Black and Colors(Non-adhesive) Dry Vinyl Tape Economical Harness Wrap 85° CET 401ES-XU5T-1A303-AATYPE ABlack Dry Vinyl Tape Economical Harness Wrap 85° CEE 208YL14-14A099-AA MSCH 93BlackFlame Retardant Vinyl HarnessSleeve w/ Adhesive Closure Difficult Routing orAbrasion Conditions and Harness Flexibility 105° CET 1000EES-XU5T-1A303-AA Type A/BBlackPressureSensitive Vinyl Economical Harness Wrap 85° C / 105° CET 1200Compliant to Yazaki YSP-9487-03-A Compliant toJapanese Ind. Std. JIS Z 0237 JIS C 2107Meets Nissan Spec forHarness Tape for FRBlackFlame Retardant 4 Mil Pressure Sensitive Vinyl Wire Harness Wrapping TapeEMS 200COAFCPN04688708Aluminum/SilverP/S Aluminum Laminated FoilEMI/RFSuppressionIU79MSDC 13D BlackPressure Sensitive Vinyl Embossed Harness Wrap for NVH Concerns Heat Shrink TubingSingle WallESB-M99D56-A2MSDB 56PM 2038Black/VariousPolyolefin Single Wall TubingCover/Insulation of Wire SplicesHeat Shrink TubingDual Wall ESF-M3L66-AMSDB 56PM 2038Black/VariousPolyolefin Dual Wall Adhesive Lined Tubing Insulate Seal and waterproof harness splices and grommets Material Code DCC-1 Mastic PatchESB-M4G312-A WSK-M4G261Meets Yazaki Material Spec.YPES-25-01-068-B1BlackButyl Die-Cut Patch Moisture ResistantLightweight ApplicationsWire Splice Seal 4257MSCH 58Thin Closed Cell Dark GrayTape-Cellular AcrylicDouble CoatedBonding Decorating or Functional Parts Exterior5314MSCH 59 (A,B,C) Represents Hung WeightTanTape-Med. Density PS Double Coated Bonding Decorating or Functional Parts Exterior 6035WSB-M3G113-BTransparentPS AcrylicTwo Sided InteriorGeneral Interior Purpose1882 Pond Run * Auburn Hills, MI 48326 * 248-475-5786 * Fax 248-475-5893The list of tapes will suit most application. Your specific needs may require another pressure sensitive product we sell but may not be listed here. Please contact your Elliott Group International Sales Representative for a technical analysis of your application. Our adhesive tapes have been used for many demanding applications, however, technical data provided on these sheets are averages. We recommend you test the tape for your application.Elliott Group InternationalElliott Tape / EGI17MSCH 3525Paper Tape VariousColorsPS Flatback Printable ID/ Code Tape166WSSM3G177-BES-XU5T-1A303-AATYPE AGrey/BlackPolymericCoated ClothBody Wire Harness WrapTape 85°C190ESB-M3G38-AES-XU5T-1A303-AATYPE CMSCH-63PM 2277ESM 2277Black Glass ClothHigh Strength HighAbrasion RES, High Temp125°C264 NFR MSCH71C Grey Black PolymericCoated ClothTapeWire Harness Wrap Tape85°268ESB-M3G177-AES-XU5T-1A303-AATYPE BMSCH71-A PM 2399BlackPolymericCoated ClothHarness Wrap and SpotTape Eng. Compartment105° C277ES-XU5T-1A303-AATYPE C Approval to VWVW-C-1 & A-4BlackHigh TempFlame RetardentPolymeric ClothEng. CompartmentHarness Wrap 125° C281ESB-M3G58-A MSCH 69/MS 2929998551499851599985144BlackPolyethyleneCoated ClothMoisture Resistant285PM 537Black Vinyl CoatedCloth TapeSplice Covering/Insulation342ES-XU5T-1A303-AATYPE D Delphi Packard PM2283Aluminum/SilverAluminizedFiberglassCloth TapeHeat Deflective Temp150° C703PB1/EE2 PF3ESF-M3G25AMSCH 23MSCH 28MSCH 289985278/9985025PM490Black/Various PS Paper TapeBundling/ Tear Tape-Breakaway510PM 525Black Uncoated ClothTapeInsulation/Splices518ESB-M3G71-B TBD PM 4107Black Vinyl CoatedCloth TapeSplice Covering/Insulation3635COAF F65B-14A121-AAM5115Aluminum/FoilAluminumLaminated FoilEMI/RFI Suppression2147/2148Meets intent ofPM-2147BlackPS Vinyl Tape 4.5MilWire Bundling4116 4314ESB-M3G85-ATYPE ITYPE IIMSCH 612MSCC 211MSAY 301M5133GreySingle CoatedPolyurethane FoamLow DensitySound and VibrationDampening/Air and DustSeal852ESBM3G5A MSDC13B 9985550M5132BlackPressure SensitivePVC Electrical TapeWire Harness Application85° CEE 12ESB-M3G147-A MSCH 75ESM-613As Specified byCustomerCellulose Printable ID Tape。
拜特配置说明文档
金盛集团/金盛国际访问拜特资金系统方法：
1、登录金盛VPN
地址：https://221.226.28.121 可将该地址收藏于IE的收藏夹中，便于日后访问。
2、输入自己VPN用户名和密码：
3、如果是2010年7月24日以后头一次登录VPN，并且您是各二级结算中心操作员，您看
到的图标可能是：
，请在这个图标上点击鼠标右键，选择“配置”——“浏览”，将自己硬盘中保存的拜特程序对应到各个图标中，如下图：
bank_check银行对账系统
count_Source柜台帐务系统及系统控制器
electron_new银企直连管理平台
interacc电子帐务系统，又称内部帐务系统
print_source票据打印系统
金盛国际结算中心人员直接选择CS主程序即可。
4、如果您之前是通过IE浏览器访问拜特系统提交付款单，请双击您所属公司的类似IE浏
览器的图标或者进行操作。
5、若您是结算中心操作员，请联系网管，需要ORACLR数据库的配置，请将以下图片给网
管看：
请建立一个“ORCL”的服务名。
6、结算中心人员在完成以上操作后，可在VPN界面上运行资金管理系统程序，第一次运行
会出现一下提示：
请按上图中的内容进行配置，密码与用户名相同，金盛集团结算中心请将用户名密码设置为：newjszb，金盛国际结算中心请将用户名密码设置为：jsgj
7、完成以上设置，便可进入业务系统进行工作了，祝工作愉快！。
ATTO FibreBridge 6500 开始指导手册说明书
ATTO Technology, Inc.155 CrossPoint ParkwayAmherst, New York 14068 USA Tel (716) 691-1999Fax (716) 691-9353Sales support:****************Technical support: Monday -- Friday, 8am-6pm EST*********************(716)691-1999ext.242© 2015 ATTO Technology, Inc. All rights reserved. All brand or product names are trademarks of their respective holders.No part of this document may be reproduced in any form or by any means without the express written permission of ATTO Technology, Inc.06/2015 PRMA-0422-000MDFibreBridge™ 6500Getting Started GuideThank you for purchasing an ATTO FibreBridge. This guide gives you the basics for installing and configuring your FibreBridge. For more information, refer to the FibreBridge Installation and Operation ManualExamine the contents of your FibreBridge packing box. If any of the items listed below are missing, contact your ATTO representative.•The FibreBridge. Note the serial number of your FibreBridge unit:________________________•Power cord(s)•“L” brackets for mounting in a 19” rack •Ethernet cable •RS 232 cable1Install the FibreBridgeNotePlease visit the download section of for Firmware, Installation and Operation Manual,QuickNAV™ IP discovery program and system drivers1.1Place the FibreBridge on a stable flatsurface, install it into a standard rack or into your device.If installing theFibreBridge 6500 into a rack, see Exhibit 1 and follow these instructions:a.Attach “L” brackets so that the frontside with the LEDs face front and the connector side is at the back.b.Install the FibreBridge horizontallywithin the rack so it does not reduce the air flow within the rack.1.2Connect and power up Fibre Channeldevices from your SAN to the FibreBridge using SFPs and multimode fiber optic cables for the Fibre Channel ports. Keep cable lengths as short as possible to ensure the highest signal quality and performance. Refer to Cabling in the FibreBridge Installation and Operation Manual.1.3Connect and power up SAS/SATA targetdevices. Refer to Cabling in theFibreBridge Installation and Operation Manual.1.4Connect the Ethernet port to yournetwork.1.5Connect power:a.Connect the AC power cord(s) fromthe FibreBridge to the proper AC source outlet and turn on the power using the power switch on each receptacle.NoteThe power source must be connected to a protective earth ground and comply with local electrical codes. Improper grounding may result in an electrical shock or damage to the unit.If you are using a rack:a.Properly ground the FibreBridge to therack equipment. The earth ground connection must be maintained.b.The power requirements plus the powerdraw of the other equipment in the rackmust not overload the supply circuit and/or wiring of the rack.1.6Wait up to two minutes for the FibreBridgeReady LED to light indicating theFibreBridge has completed its power-on self test sequence.2Discover the IP addressNoteThe FibreBridge is initially configured with DHCPenabled. It is best if you have access to a DHCP server.2.1Work from the computer attached to theFibreBridge Ethernet port on the samedomain. From the download section of, run the QuickNav Utility QuickNAV-windows.exe for Windows orQuickNAV-Mac for Mac OS X.2.2Locate the FibreBridge with the serialnumber recorded earlier.2.3Highlight the serial number.2.4Click Next.If a DHCP server is available on your network, an address is assigned automatically by the server. Note the assigned address:____________________________________ If you do not have a DHCP server, get an IP address and subnet mask from your network administrator, type it into the area provided, and click on Next.2.5Click on Launch BrowserYour browser points to the ATTOExpressNAV splash screen. If you useInternet Explorer as a browser, continue on to Internet Explorer setup below. If not, continue on to Begin initial configuration .3Internet Explorer setup3.1Open your browser3.2Select Internet Options.3.3In the Internet Options screen, select theSecurity tab.3.4Click on the Trusted Sites icon.3.5Click on the Sites button.3.6In the text box Add this Web site to thezone, add the IP address of the appliance.You may use wild cards.3.7Click on Add3.8Uncheck the Require server verificationcheck box.3.9Click OK.3.10At the bottom of the Internet Options box,click on OK and close the box.4Begin initial configuration4.1The ExpressNAV System Managerwelcome screen appears. Click on EnterHere4.2Type in the user name and password.NoteThe default values are user name root and passwordPassword. The user name is case insensitive and thepassword is case sensitive.It is best practice to changethe default user name and password.4.3You are now ready to configure theFibreBridge for use. For more information,refer to the Installation and OperationManual.5Using with Tape5.1If using with a stand alone drive no furtherconfiguration is required.5.2If using with a library or autoloader with atape medium changer proceed to thefollowing instructions:e telnet or serial CLI (to map all tapedevices to a single fibre channel port).b.Set FcMultiNode enabled.c.Saveconfiguration Restart (wait forreboot and a ready prompt).d.Automap [N] (where N= 1 or 2).5.3If mapping to a single port is not required,issue an Automap to distribute devicesevenly.Exhibit 1Brackets to install the FibreBridge into a rackExhibit 2FibreBridge 6500S, LEDs, power receptacleand portsExhibit 3FibreBridge 6500D, LEDs, power receptacleand ports。
PURPOSECRT - 04 温控器说明书
PURPOSECRT - 04 is equipped to:CONTROLLERS FEATURES:The CRT-04 controller is multi-function, programmable electronic devices which enable control of heating or cooling devices in order to maintain a stable room temperature, as well as to control ambient and substance temperatures in industrial conditions, with the option of supervising technological processes. The operation time and required temperature are achieved according to the individual program set by the user. The controller is equipped with a calendar and a real time clock which enable switching the controlled device on and off at preset hours within the following cycles: 24-hour, weekly, business-day (Mon. Fri.) or weekend (Sat., Sun.).- controlling panel use for programming and monitor to work of regulator- timer of real time with automatic function of change time summer - winter- possibilty of connection temperature probe RT4- output of relay 1P with current load 16A- control panel for programming and monitoring;- operation modes: HEATING and COOLING to maintain a preset temperature according to programmed hours and days;- CONTINUOUS operating mode to maintain a single preset temperature value while ignoring other program entries;- MEASUREMENT operating mode display of an actual temperature value without controlling a connected machine;- 50 program entries;- INTERVAL this feature enables the user to program up to 8 required temperature values (3 in the MY1, MY2 and MY3 modes, and an additional 5 in modes called MORNING, WORK, DINNER, DAY, and NIGHT for everyday time windows related to the users' lifestyle;- DELAY programmable time of response delay while exceeding limit temperature values;- CORRECTION related to the temperature read-out error against the model thermometer;- SENSORS visual signalisation of the temperature sensor failure;- DST automatic DST time implementation with programmable shift to manual mode;- LIGHT selection of display illumination mode.- LANGUAGE program menu in three languages: Polish, English or RussianCRT-04.plul. Konstantynowska 79/81tel/fax 48 42 2270971 POLANDe-mail:***********.pl95-200 PabianiceF&F products are covered by an 24 months warranty from date of purchaseDIGITAL TEMPERATUREREGULATORDESCRIPTION OF CONTROL PANEL:To work and programming of regulator CRT-04 is use control panel. It include two line with eight sign on alfanumerical display and keyboard with five buttons, which is situated under the display.In automatic or constant work mode at upper line is displaied value of temperature which is set by user, but at lower line is presented value of actual temerature which is measure by sensor which is connect to regulator .In measurement mode is displaied only lower line which present actual temperaure read from sensor.Signs on the left side of display, signalize work mode of regulator in position of output relay. This sign present:BUTTONS FUNCTIONS:In standard work mode regulator enable to make cyclic programs which wereset by user at memory. Possible is make to 50 programming registry which needed define:- day or days when will be make program. Possible is choose sibgle days( from monady to fsunday), work days, weekand and another.d- time of start program- one of eight definite by user value of task temerature (INTERVAL)FUNCTIONING:ATTENTION! Numberof program are given automaticly by regulator when the is set new program.Programs are make in chronology, it mean they start with set time and date. Stop of program is make at the moment when the nextprogram is start.EXAMPLE:The First program with temperature …morning” is execute at work days (RO) and is start at 6.00 am. The Second program with temperature …night” will be execute every day since 9 pm. The third program will be execute only weekand since 9 am. The last program with temperature “work” will be execute every Monday since 3 pm.u n d a y o u r . 0:00u n d a y ,o u r 9:00 a mo n d a y ,o u r 09:00 p mo n d a y ,o u r 06:00 a mo n d a y ,o u r 03:00 p mo n d a y o u r 09:00 p mu e s d a y ,o u r 06:00 a mu es d a y ,o u r 09:00 p me n d e s d a y ,o u r 06:00 a mExecute programATTENTION! Programs which were save at higher position are processing earlier than programs from lower position. It mean, if we have two programs with the same action and time, than will be execute program with higher number.Pass to programming mode is possible by push button MENU.Structure of main menu:PROGRAMMINGTo select position from menu we use buttons “UP” and “DOWN”. If you want pass to selected position then you need push button OK. Pass to main menu is possible by push button MENU.Menu -> MODERegulator make measurement result temperature between actual temperature from sensor C1 and task temperature Tprog. Which is set to executing program and for set width of hysteresis area H.Regulator in HEATING mode:T T P1T Regulator make measurement result temperature between actual temperature from sensor C1 and task temperature Tprog. Which is set to executing program and for set width of hysteresis area H.If temperature on input of sensor C1 fall to lower than value (Tprog H), it cause close of joint P1. Open a joint P1 will make after the temperature on input C1 will be higher than temperature (Tprog + H).Regulator in COOLING mode:T T T P1If temperature on input of sensor C1 increase to higher than value ( Tprog+ H), it cause close of joint P1. Open a joint P1 will make after the temperature on input C1 will be lower than temperature (Tprog - H).Regulator make measurement result temperature between actual temperature from sensor C1 and constant temperature Tconst, which is set by user at the moment when is select work mode and for set width of hysteresis area H.In this mode device is use only to display value of temperature.Joint P1 stay in open position.TT P1T Regulator in CONTINUOUS mode:Regulator in MEASUREMENT mode:If temperature on input of sensor C1 fall to lower than value ( Tconst H), it cause close of relay joint P1. Open of realy joint P1will make after the temperature on input C1 will be higher thantemperature (Tconst + H).Choose work mode:1. By button MENU pass to main menu of regulator.2. Push a button OK to enter pass to menu3. By buttons “UP” and “DOWN” choose work mode and enter by button OK.4. When you choose Continuous mode you should set temperature which will be hold by regulator.The first of all you set a digit of decimal position ( digit which is edit is signalize by blinking underline sign), afterwards you pass to set next position by push a button MENU. After set all digits oftask temperature enter by button OK.Menu -> ProgramOrders from menu Program make possibility to create, edit and delete programs which define behaviour of regulator in automatic work.CREATE A NEW PROGRAM:Stage of create a new program are following:1. After pass to Menu -> Program and select program- > set and enter by button OK, by buttons “UP” and “DOWN” set a minute, enter by OK and set hour for start program ( value which is edit is signalize by blinking underline minute and hour)2. Push button OK and by buttons “UP” and “DOWN” set a day when will be start program. We have following option:Monday,Tuesday,Wednesday, Thursday, Friday, Saturday, Sunday Program will be start in choosen dayProgram will be start in every work day (from Monday to Friday).Program will be start at Saturdy and Sunday Program will be start at every day of week.RO - Work days WEeekendy DO - free dayEnter selected day by button OK.3. By buttons “UP” and “DOWN” set a task temperature for present program.ATTENTION!! Possible is choose one of eight values of temperature which were definite in MENU -> interval. Everyone of values are signed by parameters: Morning, Work, Dinner, Day, Night, Mine1, Mine 2, mine 3. Changes value of temperature for present program is automaticly set for every programs with this parameter.4. Save program in memory by button OK.At any time possible is out from create new program mode, without save all registry, by button MENU.Example of create a new program:EDITION OF EXIST PROGRAM:1. After pass to menu Program need to choose option Program -> edit and enter by button OK.2. By buttons “UP” and “DOWN” select program which will be edit and enter by button OK3. Next operation are similarly as create new program.Edition of program without save all change, could break by push button MODE.DELETE PROGRAM1. After pass to menu Program need to choose option Program -> delete and enter by button OK.2. By buttons “UP” and “DOWN” select program which will be delete and enter by button OK.3. Confirm delete of program by button OK.ATTENTION! Delete program cause automaticly change numbers of rest programs.Menu -> IntervalOrdered value of temperature in programs which are make by regulator CRT-04 is not define in program code, but by group of eight parameters which comes from menu interval.If you want change value of temperature which is connect with selected parameter need to:1. After pass to menu Interval by buttons “UP” or “DOWN” select edited parameter.2. Enter by button OK.3. By buttons “UP” or “DOWN” set correct value for decimal position of degree.4. If you wont pass to edit temperature on next position, push button Menu (edit position will be signalize by blinking underline sign)5. Repeat procedure from point 3 and 4 need set all numbers with new value of ordered temperature.6. Enter all changes by button OK.Push a button any time in edit mode cause out from edition mode without save all changes.Example of set a new value of temperature:Menu -> TimerThis mode is use only for change date and time.Set a DATE:1. After pass to menu timer by buttons “UP” or “DOWN” select timer -> DATE and push button OK.2. By buttons “UP” or “DOWN” set correct month, enter OK3. By buttons “UP” or “DOWN” set correct day.Example of procedure:SET TIME:1. After pass to menu timer by buttons “UP” or “DOWN” select menu TIMER and push button OK.2. By buttons “UP” or “DOWN” select timer -> Hour and push button OK.3. By buttons “UP” or “DOWN” set correct minute, enter OK4. By buttons “UP” or “DOWN” set correct hour.5. Push button OK.. cause enter changes and start count time from set value.Example of procedure:AUTOMATIC CHANGE TIME FUNCTION:Regulator CRT-04 could automaticly change time from winter tosummer and from summer to winter. This function will be make automatic or handwork, it is set by user.If you want set function DST need to:1. After pass to menu timer by buttons “UP” or “DOWN” select function DST.2. Enter by button OK.3. By buttons “UP” or “DOWN” choose option Atomatic (if regulator have automatic change time function) or handwork (when change of time will not make).4. Enter by button OK..Menu -> SystemThis mode make possible to define additional functions of regulatorCRT-04.DELAYThis parameter make possibility to put delay of reconnection realyoutput by ordered time. In practic this function will be use at the situation when we wait for turn ON/OFF of heater, it will make when temperature go out from allow regulation area.Example with use time delay by value Tzw and regulator is presented at under picture. In this cause condition of enclose is fall a temperature under value (Tprog H) for time Tzw, but condition of excluse is increase temperature higher than value (Tprog + H) for time Tzw.T T P1T If you need set a delay time of reconnection follow procedure:1. Pass to menu -> System and by buttons “UP” or “DOWN” select option System -> Delay.2. Enter by button OK.3. By buttons “UP”and “DOWN” set value of delay.4. Enter by button OK.Push a button any time in edit parameter cause out from edition mode without save all changes.ATTENTION!: Delay time could be set in range 0 ÷ 15 min.,with step1 min.Example of setting delayHYSTERESISThis parameter make possibility to define precision and cleanliness with in will be reconnect output of relay at regulation of temperature. If value of hysteresis is smoler than precision is higher but enclose of heater component will be oftenly. But if the value of hysteresis is large that cause lower frequency of connection heater component and precision of regulation is lower.Examples characteristics with two different hysteresis areas:T T P1T S m a l l a r e a o f h y s t e r e s i sTT T L a r g e a r e a o f h y s t e r e s i sIf you need set value of hysteresis follow with procedure:1. Pass to Menu -> System and by buttons “UP” or “DOWN” select option -> Hyst.2. Enter by button OK.3. By buttons “UP” or “DOWN” set value of hysteresis.4. Enter by push button OK.At any time possible is out from edit parameter mode, without save all registry, by push button MENU.ATTENTION: Hysteresis could be set in range 0÷10°C, with step 0,1°C.Example of setting hysteresis:CORRECTIONThis parameter is use for correction indication from sensor. To set correction indication of sensor follow the procedure:1. Pass to Menu -> System and by buttons “UP” or “DOWN” select option System -> Correction2. Enter by button OK.3. By buttons “UP” or “DOWN” set value of correction.4. Enter by button OK.At any time possible is out from edit parameter mode, withoutsave all registry, by push button MODE.ATTENTION ! Correction of sensor indication could set in range 5.0 ÷ 5.0 °C, with step 0,1°C.Example of setting temperature correction:SELECT REPORT LANGUAGEThis parameter make possiblity to choose on of three language in which will be display reports. If you need change language you need pass to menu System -> Language by buttons “UP” or “DOWN” select language and enter by button OK. Return to main menu is possible by push button MODE.LIGHTING OF DISPLAYThis parameter make possibility to lighting a display of regulator. Possible is set lighting for all the time for display or lighting only for some second after push any buttonIf you need way of lighting you need to pass menu System -> Light and select by buttons “UP” or “DOWN” correct option and enter by button OK.. Return to main menu is possible by push button MODE.REATURN TO DEFAULT SETTINGSDefault settings make possibility to return all settings of regulator to target values. If you need restore default settings pass to menu System -> default settings and enter by button OK. Next by buttons “UP” or “DOWN” set value YES and push button OK.ATTENTION! Return to default settings cause delete all earlier configurations with saved programs.Rest of parameters of regulators are set with values:ModeHandwork Tzad (handwork)25,0°C Hysteresis0,0°C Delay0min Sensor correction0,0°C Correction of odered value0,0°CInterval20,0°C (everyone)Lighting of displayAll time DST AutomaticDate / Time01.01.2008 00:00QUICK CONFIGURATIONRegulator CRT-04 make possibility choose work mode and change value of order temperature without pass to programming mode.QUICK CHANGE VALUE OF WORK TEMPERATUREIf you need change work mode in standard work you need push button MODE, next follow with instructions as select work mode which is presented in programming mode section.QUICK CHANGE OF ODERED VALUETo change ordered value of temperature in standard work of regulator use buttons “UP” or “DOWN”. Pushing once time button “UP” cause increase ordered temperature by 0,5°C, but pushing button “DOWN” cause fall ordered temperature by 0,5°C. Increas temperature higher than default value is siganlize by display in upper line a sign , but fall temperature is siganlize by sign .ATTENTION!Handwork correction of ordered temperature will be force at all next work in automatic mode. Also after start program to next step of program, forced value will be change by value from handwork correction Return to deafult settins is possible in causes:- hadwork configuration to moment when arrow will disappear from display.- reconnection regulator to continuous work mode.,Example of quick configuration of ordered temperatureDISPLAY ACTUAL DATE AND TIMEDisplay to date and time, need to in standard work of regulatorpush button OK..ERRORS SYGNALINGAfter 3 sec. regulator return to earlier window.In the cause break or wrong work of sensor, regulator displayunderline report :In this cause first of all need to check connection of sensor.sensor DS18S20dimensions of sensorŘ5LiYY 3×0,34mm˛ l=2,5m; h=30mmsensor isolationtherm jacketcablePROBE RT4TECHNICAL DATAASSEMBLY:supply230V ACcurrent load<16Ajoint separated 1Prange of regulation temperature0÷60°Chysteresis setting range 0÷10°Cprecision 0,1°Cmodel correction±5°Cdelay reconnection- to set1÷15minpower consumption1,5Wworking temperature-20÷40°Cterminal screw terminals 2,5mm²dimensions 3 modules (52,5mm)fixing on rail TH-351. Take OFF the power.2. Regulator put on the rail in the switchgearbox.3. Connect supply: L to joint 1; N to joint 2.4 Out cable of temperature probe connect to realy with marksWHITE cable(7) to joint 8, BROWN cable (9) to joint 9 .5. System of enclose receiver connect in line to joints 11-126. Set program to regulation temperature.For use seprtated reconnection of joint 1P, were accept ininstruction configuration:ATTENTION!CRT-047WGB R89111210WIRING DIAGRAMATTENTION!Do not any change in device. It impend break or wrong work ofdevice, it will cause break contolled device or menace for user. Inthis cause producer is not responsible of arise accidents andcould refuse given warranty for regulator in cause submit a claim.A090701。
VIAVI T-BERD MTS 5800 产品说明书
VIAVI//PublicT-BERD/MTS-5800 Portable Network TesterQUICK CARDSONET Bit Error Rate Testing (BERT)This quick card describes how to configure and run a SONET Bit Error Rate Test at the full concatenated line rate. Please note that the T-BERD can also test channelized payloads (DS1, VT1.5, and STS-n). Please refer to the T-BERD 5800 User’s Guide for information.•T-BERD/MTS 5800 equipped with the following:o BERT software release V30.1.0 or greater o C5LSSONSDH test option for OC-3 and OC-12o C525GSONSDH test option for OC-48o C510GSONSDH test option for OC-192•Optical Transceiver supporting the Optical Carrier level to be tested (SFP or SFP+)•LC Attenuators (5dB, 10dB, and/or 15dB)•Cables to match the optical transceiver and the line under test •Fiber optic inspection microscope (P5000i or FiberChek Probe)•Fiber optic cleaning suppliesFigure 1: Equipment Requirements1.Press the Power button to turn on the T-BERD.2.Press the Test icon at the top of the screen to display the Launch Screen .3.Using the Select Test menu, Quick Launch menu, or Job Manager, launch the SONET Bulk BERT test on Port 1 for the desired Optical Carrier level. For Example:SONET ►OC-3►STS-3c Bulk BERT ►P1 Terminate.4.Tap to open the Tools Panel and select .5.Press to continue.Figure 2: Launch ScreenFigure 3: Tools PanelVIAVI//PublicT-BERD/MTS-5800 Portable Network TesterQUICK CARD2•The following Information is needed to configure the test:•Optical wavelength(typically, 1310nm or 1550nm)•Test Pattern(s) (default is 2^23-1 ANSI)•BER Pass/Fail Threshold1.Press the Setup soft key on the top right side of the screen.2.Select the Interface/Connector folder.3.Insert desired SFP into the Port 1 SFP+ slot on the top of the T-BERD.4.Review SFP information in the Connector tab:►Verify that the SFP operates on the required wavelength (1310nm or 1550nm).►Verify that the SFP supports the required optical carrier level (OC-3, OC-12, OC-48, or OC-192).►Note the Min and Max Tx Levels (dBm) and Max Rx Level (dBm) to assess if optical attenuators are required.5.Select the indicated folders and configure your test as follows. Leave all other values at default, unless specified in the work order.6.Press the Results soft key to view the Test Results screen.Figure 4: Work OrderFolder Option Value(s)Interface,SignalClock SourceSelect “Recovered” unless you are testing dark fiber with no SONET equipment PatternPattern Mode ANSI Pattern2^23-1 ANSIFigure 6: Setup, Interface/SignalFigure 7: Setup, PatternFigure 5: Setup, Interface/Connector/SFPVIAVI//PublicT-BERD/MTS-5800 Portable Network TesterQUICK CARD31.Using drop-down menus , select“Payload/BERT ” for the right results display.2.Select the Laser tab in the Actions panel, and press . The button will turn yellow and be relabeled .3.Press the Restart soft key .4.Verify the following:►Level (dBm) is within the Rx Level range of the SFP .►Summary LED is green.►Signal Present LED is green. ►Frame Sync LED is green.►Path Pointer Present LED is green ►Pattern Sync LED is green.►Summary/Status results shows ‘ALL SUMMARY RESULTS OK”5.Allow the test to run for desired duration and verify the following:►Bit/TSE Error Rateresult does notexceedyour required threshold.(0.00E+00 if pass/fail threshold unknown)•Use the VIAVI P5000i or FiberChek Probe microscope to inspect both sides of everyconnection being used (SFP , attenuators, patch cables, bulkheads)►Focus fiber on the screen.►If it appears dirty, clean the fiber end-face and re-inspect.►If it appears clean, run inspection test.►If it fails, clean the fiber and re-run inspection test. Repeat until it passes.•If necessary, insert optical attenuators into theSFP TX and/or RX ports.•Connect the SFP to the port under test using ajumper cable compatible with the line under test.Figure 9: Results, Payload BERTFigure 8: Inspect Before You ConnectStatusTipSignal Present LED not greenCheck your cables.Tx and Rx may be reversed.Path Pointer Present LED not green and AIS-P alarm on There may be no loop or no connectivity to the loop. The wrong payload may be selected (concatenated vs. channelized).RDI-L alarm onThe Tx Level is too high.Add an attenuator between the SFP Tx port and the line under test.Path PointerAdjustments incrementingClock Source is set incorrectly.Change Clock Source to “Recovered .”Figure 10: Troubleshooting TipsVIAVI//PublicT-BERD/MTS-5800 Portable Network Tester QUICK CARD© 2022 VIAVI Solutions, Inc,Product specifications and descriptions in this document are subject to change without notice.Patented as described at /patentsContact UsTo reach the VIAVI office nearest you,visit /contact+1 844 GO VIAVI(+1 844 468-4284)6.In the T-BERD’s Quick Config menu, change “Pattern ” to the next value in the test plan. 7.Press the Restart soft key to reset results.8.Allow test to run for desired duration and verify the following:►Pattern Sync LED is green.►Bit/TSE Error Rate or Round Trip Delay does not exceed your required threshold.►Repeat steps 6 through 8 for all Patterns in the test plan. Patterns may include:▪Delay : MeasuresRound Trip Delay (RTD) instead of Bit Errors.RTD values are shown instead of BERin the “Payload/BERT” results display.Figure 11: Results, Quick Config1.Tap to open the Reports Panel and select . .2.Tap .3.A report will be saved to the T-BERD 5800’s/bert/reportsfolder.Figure 12: Create Report。
ATTO Celerity FC Host Adapter Getting Started Guid
ATTO Technology, Inc.155 CrossPoint ParkwayAmherst, New York 14068 USATel (716) 691-1999Fax (716) 691-9353Sales support:****************Technical support: Please visit https:///support/ for hours of operation.*********************Tel (716) 691-1999 ext. 242© 2016 ATTO Technology, Inc. All rights reserved. All brand or product names are trademarks of their respective holders. No part of this document may be reproduced in any form or by any means without the express written permission of ATTO Technology, Inc.4/2016 PRMA-0400-000MDCelerity Fibre Channel Host AdapterGetting Started GuideThank you for purchasing the ATTO Celerity FC HostAdapter. This guide gives you the basics for installing andconfiguring your adapter. For more information, refer to theCelerity Installation and Operation Manual and the ATTOUtilities Manual.Ensure you have the equipment and software youneed for the installation:•Celerity FC adapter• A computer with an available PCIe, PCIe 2.0 orPCIe 3.0 expansion slot•Storage, cables and connectorsInstalling the Latest Celerity 32Gb, 16Gb or 8GbDrivers1Please visit the ATTO website at https:///2Hover over Support and click Downloads.3For returning customers login by entering yourusername and password. For new users pleaseregister to create login.4Select Product: Click on Fibre Channel HBAs5Select Model: Click on 32Gb, 16Gb CelerityHBAs or 8Gb Celerity HBAsInstall DriversConfigure your system to recognize and use yourCelerity adapter by installing drivers for your operatingsystem.Windows1Power on your system and log in as theadministrator or a user with properadministrative privileges.2Go to the ATTO website and login as describedin the Installing the Latest Celerity 32Gb, 16Gbor 8Gb Drivers section3Click on Windows. This will display the mostcurrent Windows drivers available.4Click on Windows XX Driver link based on theoperating system (x86 or x64) in use. If you areunsure which version you are using, pleasecontact your system administrator.5Open the download link and click run.6Follow the on-screen instructions to completethe driver installation.NoteWHQL Certified Drivers are available for selectCelerity Fibre Channel HBAs. If available, thesedrivers will be listed below the default Windowsdrivers.OS XSupport for all Celerity FC models except 164E1Power on your system and log in as theadministrator or a user with properadministrative privileges.2Go to the ATTO website and login as describedin the Installing the Latest Celerity 32Gb, 16Gbor 8Gb Drivers section3Click on Mac. This will display the most currentMac OS X drivers available.4Click on the Mac OS X Driver link based on theoperating system in use. If you are unsure whichversion you are using, please contact your system administrator.5Open the download.6Launch the installer package.7Follow the on-screen instructions.LinuxNoteNote: These steps assume a basic knowledge of Linux terminal commands. You must also have the correct kernel source files for the appropriate kernel already installed.1Power on your system and log in as the administrator or a user with properadministrative privileges.2Go to the ATTO website and login as described in the Installing the LatestCelerity 32Gb, 16Gb or 8Gb Driverssection.3Click on Linux. This will display the most current Linux drivers available.4Click on Linux XX Driver link based on the operating system in use. If you are unsure which version you are using, pleasecontact your system administrator.5Copy the .tgz file to a temporary folder.6Open a terminal window and change to the location of copied tgz from step 5.7Extract the file using the command tar -xfz <filename.tgz>.8Change to the directory created above then run the installer script ./install.sh.9Click on Y to load driver.10Click on Y to install CLI tools.11Confirm location.VMware (ESXi 5.x/6.0)NoteNote: ESXi 5.0 & later: 8Gb Celerity supportESXi 5.1 & later: 16Gb Celerity support1Download the correct Driver Bundle from the VMware or ATTO website.2Within the bundle unzip the Driver VIB file (.vib) for your ATTO Adapter.3Use the Datastore Browser in the vSphere Client to upload the VIB file to your ESXihost.4Log in to the ESXi host on the Local Tech Support Console (ESXi), or through anSSH client.5Install the VIB using the followingcommand on the ESXi host: # esxclisoftware vib install -v <full path to VIB file> 6Once the VIB is installed, reboot the ESXihostFreeBSDNoteRefer to the Celerity Installation and Operation Manual forinstructions on installing FreeBSD driversInstalling the ATTO ConfigToolThe ATTO ConfigTool is a free utility. Visit theATTO website (/downloads.php) for specific operatingsystem support information and downloads.The ATTO ConfigTool includes twocomponents: a GUI Application and a systemservice. Either, or both, of these componentscan be installed on a host, depending on thefunctionality desired. Refer to the Utilitiesmanual for additional details.NoteLogging and other important features are only available if theATTO ConfigTool service is installed. We recommendinstalling the service as a minimum configuration.NoteThe vConfigTool supports VMware VCenter Server. Refer tothe ATTO website for information on downloading and usingthis free utility.Windows Installation Instructions:1Double-click thewin_app_configtool_xxx.exe package file2Click "Unzip" to extract the installer files.The files are put in "C:\ATTO\ConfigTool\4.xx" directory.2.1To install the Full Application orApplication Only:•Navigate to the "C:\ATTO\ConfigTool\4.xx\Service"directory•Double-click on the ConfigTool_xxx.exeinstaller executable•Select Full Installation or ApplicationOnly as desired.•Follow the on-screen instructions2.2To install the System Service only:•Navigate to the"C:\ATTO\ConfigTool\4.xx\Service"directory•Double-click on the "attocfgd.msi"installer executable•Follow the on-screen instructionsOS X Installation Instructions:1Double-click theosx_app_configtool_xxx.exe package file.2 A Finder window appears.2.1To install the Full Application orApplication Only:•In the Finder window that appears,double-click on the ConfigTool_xxx.appinstaller executable.•Select Full Installation or ApplicationOnly as desired.•Follow the on-screen instructions.2.2To install the System Service only:•Navigate to the “Service” folder in theFinder window that appears.•Double-click on the "attocfgd.mpkg"installer executable file.•Follow the on-screen instructions.Linux Installation Instructions:1Extract the package file by running thefollowing command in a terminal: tar -xvzflnx_app_configtool_xxx.tgz2Navigate to the extracted folder“lnx_app_configtool_xxx”2.1To install the Full Application orApplication Only:•Run the ConfigTool_xxx.bin installerexecutable as root or superuser.•Select Full Installation or ApplicationOnly as desired.•Follow the on-screen instructions.2.2To install the System Service only:•Navigate to the “Service” directorylocated inside thelnx_app_configtool_xxx directory•Double-click on the "attocfgd.msi"installer executableRun the “attocfgd.sei” installer executable asroot or superuser using the followingcommand line: ./attocfgd.sei -i.Hardware InstallationBack up your system data before changing orinstalling any hardware.CAUTIONCelerity FC host adapters containcomponents that are sensitive toelectrostatic discharge (ESD). ESDcan Cause damage to the Celerity FChost adapter. Please follow standardmethods to avoid ESD.1Install the latest drivers. Refer to InstallDrivers of your Celerity Fibre Channel HostAdapter Getting Started Guide.2Power down the computer and unplug thecomputer from all power sources.3Open the case.4Install the Celerity FC host adapter in anyopen PCI Express expansion slot. ForCelerity 164E only, install the appropriateexternal power cable (supplied). If youhave questions about how to install anexpansion card in your system, consultyour computer’s documentation.NoteAll Celerity cards fit in x8 or x16 mechanicalslots.CAUTIONCelerity 16Gb Quad Fibre ChannelHost Adapters (FC-164E) requireexternal power supply and adequatecooling to ensure proper systemoperation and prevent data loss.5Connect Fibre Channel devices byinserting a Fibre Channel cable from thedevices to the connectors on the CelerityFC host adapter until you hear a click.6Close the case on the computer and powerit up.Configure your storage and adapterDefault settings are appropriate for mostsystems but you may change settings usingthe ATTO Configuration Tool on the ATTOwebsite.Please see ATTO Utilities Installation andOperations Manual for further information.。
TEKPROBE BNC接口适用于P6204、P6205、P6217和P6231s激活FET探头的产
• Powers up to Two Probes
• For Use with: - 11000 Series Probes on NonTEKPROBETM Interfaced Scopes - P6203, P6204, P6205, P6217, P6231, P6245
• Overload Protected
Teldronix Distributor (see pages 59(}595).
Product(s) avalla~le through your local Tektronix representative (listed In the bac~ of this catalog) or call 1-800-426-2200.
.(809001
.NXillSIifl:I"',*~~
Tektronix M!lll$llf6ll1eRt products are m~ufaClureQ IR
ISO registered facilities.
P6205
• DC to 750 IVIHz • 2 pF Input C • 1 MQ Input R • Low Price
These Active Probes may also be used with 50 Q or 1 MQ oscilloscope systems, with conventional BNC interfaces, via the Tektronix 1103 TEKPROBETM Power Supply. The 1103 has dual TEKPROBpM inputs, dual BNC signal outputs, and dual voltage offset on/off switches and potentiometers.
PEX-1X 用户手册说明书
目錄 :PEX-1X卡介紹 (02)功能介紹 (02)產品內容 (03)光碟內容 (04)瞭解PEX-1X卡 (04)硬體圖片 (04)系統功能 (05)硬體設定 (06)LED指示燈說明 (07)系統安裝 (08)硬體安裝 (08)使用模式 (09)軟體安裝 (11)目錄及檔案 (14)軟體使用及操作 (16)視窗功能介紹 (16)設定功能單元 (17)主操作視窗單元 (18)量產模式操作流程 (24)工程模式操作流程 (27)電流校正操作 (28)系統設定 (29)軟體解除安裝 (32)注意事項與故障排除 (33)附註說明 (35)連絡方式 (36)PEX-1X PCIe Hot Swap Extender是一PCI Express x1單片延伸保護卡，適用於第三代PCIe 匯流排(PCI Express Bus)相容的PC。
提供隔離主機板的PCIe與待測卡 (Device Under Test 以下簡稱DUT)之間所有電源及訊號的功能，方便於進行熱插拔換卡驗證與測試。
隔離功能可利用延伸保護卡本身內建的電源開關手動控制或透過軟體遠程控制。
熱插拔換卡功能可免除使用者於測試驗證時，需關閉PC 電源及作業系統或重覆開關機的動作，可讓工程人員或測試人員於PC保持開機狀態下，運用本產品及所提供的程式，就可作相關的PCIe待測裝置(Hot Swap)換卡測試驗證的動作，免去換卡測試需要重新開關PC所浪費的時間，有效縮短測試時間，增加產能及快速測試的效率。
搭配本產品的自動開關功能及插入自動啟動測試功能，可簡化測試動作，進一步增加測試速率並減少人為操作失誤，達到自動化測試的要求。
保護功能提供短路及過電流(過載)保護。
在使用者欲測試不明狀態或故障的PCIe 介面卡時，以優異準確之各組直流電源( +3.3V,+12V, +3.3VAUX)監控設計, 確保PCIe 待測裝置正常工作。
一旦出現短路或超出正常電壓、電流時，PEX-1X 會立即切斷插槽上的電源,以保護PC主機及待測裝置不被燒毀。
VerifEye 通信解决方案选择指南说明书
®When to Use VerifEye™Communication SolutionsSelecting the Best ProductFor All ApplicationsSelection Strategies for VerifEye Communication SolutionsDESIGNING THE BEST SUBMETERING SOLUTION FOR APPLICA TIONS OF ALL SIZES AND SCOPESVerifEye delivers a comprehensive line of innovative submetering communication products that transport and translate meter data into usable information. In order to select the appropriate communication product, it is important to keep specific project parameters and goals in mind:• What is the size of the facility?• Are gas and water meters installed?• What type of submeter has been selected?• What is the communication protocol used in the facility?Following the specific application and communication requirements of the facility simplifies the selection of communication solutions.Leviton Manufacturing Co., Inc. Lighting & Energy Solutions20497 SW Teton Avenue, Tualatin, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: 503-404-5594 /les© 2015 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.Leviton Manufacturing Co., Inc. Lighting & Energy Solutions20497 SW Teton Avenue, Tualatin, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: 503-404-5594 /les© 2015 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.Series 4000 MeterSeries 4000 MeterMODBUS RTU METER SOLUTIONFEA TURES:• Dual/single/3-phase environments• Advanced feature set that measures multiple parametersincluding amps, KVar, KV A, etc.IDEAL APPLICA TIONS:• Commercial • Industrial• ManufacturingSeries 8000 MeterWHA T YOU WILL NEED EMB Hub®BACNET COMMUNICA TION SOLUTIONFEA TURES:• For applications where an Ethernet connection is required• Designed to work with an existing BACNet network• Ideal solution for factory scheduling applications IDEAL APPLICA TIONS:• Facility management systems • Manufacturing • IndustrialSeries 3500 MeterWHAT YOU WILL NEEDWIRELESS MODHOPPER COMMUNICA TION SOLUTIONFEA TURES:• Products create a self-healing mesh network• High-powered, long-range RF transceiver that easily interfaces with Pulse and ModBus meters• Perfect solution for any application with a large space where wiring would be difficult and cost-prohibitiveIDEAL APPLICA TIONS:• Stadiums • Airports• College Campuses • Shopping MallsWHA T YOU WILL NEEDSeries 4000 MeterModHopperModHopperModHopperSeries 4000 MeterSeries 4000 MeterEMB HubBMSEnergy Manager, BillSuiteor BMO 2.0**BMO 2.0 is free with purchase of a VerifEye Hub NOTE: Also compatible with3rd party software systemsor BMO 2.0**BMO 2.0 is free with purchase of a VerifEye Hub NOTE: Also compatible with 3rd party software systemsPULSE METER SOLUTIONHD Pulse ModuleEMB HubSeries 1000 (1 PH)or Series 2000 (3 PH)Pulse Communication SolutionWHA T YOU WILL NEEDIDEAL APPLICA TIONS:• Small to mid-sized commercial • Whole building monitoringFEA TURES:• Low cost kWh/demand meter • Reliable workhorse solution Series 2000 MMUScalable solution for collecting meter data from VerifEye and third party meters, including gas and water.Energy Manager, BillSuiteor BMO 2.0**BMO 2.0 is free with purchase of a VerifEye Hub NOTE: Also compatible with 3rd party software systemsPerfect for applications involving VerifEye or third party ModBus RTU meters.Energy Manager, BillSuiteor BMO 2.0**BMO 2.0 is free with purchase of a VerifEye Hub NOTE: Also compatible with 3rd party software systemsFor BACnet IP to Building Management Systems—use Series 3500 Meter as a standalone device monitoring up to 35 parameters or as part of a BMS.Designed for applications where installing communications cable is cost-prohibitive.G-9490/F15-tbWIRELESS MDU TENANT BILLING COMMUNICA TION SOLUTIONFEA TURES:• Wireless communications are cost-effective and easy to install for large tenant complexes• Directly connects with BillSuite Software for simple tenant billing • 0.5% mini meter delivers revenue-grade accuracy IDEAL APPLICA TIONS:• Multi-tenant office complexes • Apartment and condo complexes • Dorm buildings • T enant spaces0.5% Mini Meter with Internal Wireless TransceiverWireless Repeater WHA T YOU WILL NEED®DCAPWHOLE BUILDING SCALABLE MONITORING SOLUTIONFEA TURES:• Reduced installation time and cost with integrated meter and dataacquisition device• Expandable via ModBus RTU to include gas, water and steam meters for a whole building monitoring solutionIDEAL APPLICA TIONS:• Franchise locations • Small to mid-size commercial • Campuses • Benchmarking applicationsMeter and HubWHA T YOU WILL NEEDor BMO 2.0**BMO 2.0 is free withpurchase of a VerifEye Hub NOTE: Also compatible with 3rdparty software systemsGas Meter*Water Meter*HD Pulse Module*BMO 2.0 is free with purchase of a VerifEye Hub NOTE: Also compatible with 3rd party software systemsLeviton Manufacturing Co., Inc. Lighting & Energy Solutions20497 SW Teton Avenue, Tualatin, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: 503-404-5594 /les© 2015 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.Designed for retrofit and new MDU applications where communication wiring installation may be cost-prohibitive.Whole building electric metering with easy expansion to additional meters in the future, such as gas and water.。
Polycom RPX HD 400和200系列版本2.7.1发布说明书
Release NotesPolycom® RPX™ HD 400 and 200 SeriesVersion 2.7.1Polycom announces the general availability release of its Polycom RealPresence Experience™ (RPX) HD, version 2.7.1. This document provides the latest information about this release.TopicsIntroducing the Polycom RPX HD 2.7.1 Release (2)What’s New in RPX HD Version 2.7.1? (2)Software and Firmware Used in Version 2.7.1 (2)Upgrading the Software to Version 2.7.1 (3)Configuring the Content Monitors in Your RPX Suite (4)Issues Fixed in This Release (6)Known Issues and Limitations (7)For Users (7)For Administrators (9)Where to Get the Latest Product Information (10)Copyright Information© 2011 Polycom, Inc. All rights reserved.3725-25796-012/B (January 2011)Polycom, Inc.4750 Willow RoadPleasanton, CA 94588-2708USATrademark InformationPOLYCOM®, the Polycom "Triangles" logo and the names and marks associated with Polycom's products are trademarks and/or service marks of Polycom, Inc. and are registered and/or common law marks in the United States and various other countries. All other trademarks are property of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, for any purpose other than the recipient's personal use, without the express written permission of Polycom.Introducing the Polycom RPX HD 2.7.1 ReleasePolycom is pleased to announce the release of the Polycom RPX HD 400 and 200 Series, version 2.7.1.The Polycom RealPresence Experience High Definition offers unprecedented high-definition video ina cinematic view, extraordinary StereoSurround™ audio, and high resolution content. This trulyimmersive meeting environment provides the ultimate meeting experience for executives in anyorganization, linking sites across the globe.What’s New in RPX HD Version 2.7.1?RPX HD version 2.7.1 is a maintenance release for RPX HD version 2.7, which provides the following functionality:∙Optimize bandwidth with H.264 High Profile, a standards-based video compression technology that delivers full HD quality while lowering your bandwidth requirements by up to 50 percent.H.264 High Profile is supported only on RPX HD systems with HDX 8000 series codecs.∙Simply and easily view a list of scheduled meetings and join those meetings using the Polycom Conferencing for Microsoft® Outlook® feature.∙Support for the new Delta VW7028 projector, which replaces the Delta VW7008 projector beginning in the first quarter of 2011.Information on the configuration of these and other RPX features is provided in the PolycomImmersive Telepresence (ITP) Administrator’s Guide.Software and Firmware Used in Version 2.7.1RPX HD version 2.7.1 uses the following software and firmware:∙Polycom Telepresence Tool version: 2.7.1.1 (TelepresenceTool_2.7.1.1.msi)∙Crestron software version: 2.7.1-1 (RPX_2.7.1-1.zip)∙Crestron AV2/PRO2 firmware version: 4.001.1012 (Feb 17 2009)(pro2_av2_cp2_cp2e_rack2_pac2_4.001.1012.zip)∙Crestron Touch Panel firmware version: 3.001.0015 (tps-3000_tps-3000l_tps-3100_tps-4000_tps- 4000l_3.001.0015.zip)∙HDX software version: polycom-hdx-hf-2.6.1.3_00_itp271-5267.pup∙HDX software version without encryption: polycom-hdx-hf-2.6.1.3_00_itp271_ne-5267.pup∙Delta projector firmware version for VW7008 projectors: FD31+SD30. The full file names are FD31-VW7008-20090907 and SD30-VW7008-2008090.∙Delta projector firmware version for VW7028 projectors: FP04+SP04. The full file names are FP04-VW7028BBCP-20101203 and SP04-VW7028BBCP-20100913.For information on versions of other Polycom products, such as RMX™ and CMA™, that are compatible with this release, refer to the Polycom Immersive Telepresence (ITP) Deployment Guide.Upgrading the Software to Version 2.7.1If the software at the RPX HD site is being upgraded to version 2.7.1 from an earlier version, theinstaller must follow these configuration procedures:1.Upgrade the Delta projector firmware if necessary.NOTE If you are upgrading the software to version 2.7.1 and your systemhas Delta projectors, you must ensure that the Delta projectorfirmware is at the correct version listed in the previous section. Thismay require you to upgrade the projector firmware. The firmwareupgrade must be performed onsite by a trained installer.2.Upgrade the HDX software.3.Configure the control system.4.Install and use the Telepresence Tool.5.Configure the Immersive Telepresence features.6.Align and calibrate the projectors (if you upgraded the projector firmware).7.Configure, align, and match the cameras (if you upgraded the projector firmware).The steps above are described in the Polycom RealPresence Experience (RPX) HD 400 Series Installation Guide, Version 2.7.1 or the Polycom RealPresence Experience (RPX) HD 200 Series Installation Guide,Version 2.7.1 as well as the Polycom Immersive Telepresence (ITP) Administrator’s Guide.Important Note: If your RPX HD system was installed after April 30, 2010 and you wish to upgrade from version 2.6 to version 2.7.1 software, you may need to obtain a new 1080p software license (part number 5150-26946-001) from Polycom. Please contact Polycom Customer Support at for more information.Configuring the Content Monitors in Your RPX Suite1.On the laptop, start the Polycom Telepresence Tool.2.The first time you use the Polycom Telepresence Tool with the RPX, the Select TelepresenceModel dialog box will appear and you must do the following:a.In the Select Model field, select the RPX system model.b.In the Select Main Display field, select the video format for the main displays installed inthe room.c.In the Select Content Display field, select Standard – VGA 1024x768.You must select Standard – VGA 1024x768 whether you have standard or widescreencontent monitors.d.Click OK.3.Press the Enter button on the content monitor to display the Configuration screen.4.Press the Right Arrow button on the screen to select Image Properties.5.Click OK.6.Press the Right Arrow button on the screen to select Scaling.7.Click OK.8.Select Full Screen.9.Click OK.10.If needed, press the Auto Sync button to make the content fill the screen.11.Repeat steps 3 through 10 for the remaining content monitors.Issues Fixed in This ReleaseRPX version 2.7.1 incorporates both HDX software version 2.6.1.3 and HDX hotfix version 2.6.1.3-HF5. HDX software version 2.6.1.3 provides a correction for an issue recently observed at the factory in which Polycom HDX systems restarted intermittently while in a call. HDX hotfix version 2.6.1.3-HF5 provides a correction to an intermittent lip sync issue.The following table lists the other issues fixed in RPX HD Version 2.7.1.Feature DescriptionAudio/Video Calls On rare occasions when placing a video or audio call with the Enhanced UI, the system may have automatically dialed the number before you pressed the Connect button.When viewing an RPX system in a 1080p multipoint call with an RMX 2000 or RMX 4000 with MPMx, you will no longer see a thin black vertical line between cells of the RPX system. For more information, refer to the Polycom® ImmersiveTelepresence (ITP) Deployment Guide.Touch Panel/ User Interface When joining a Polycom Conferencing for Microsoft Outlook (PCO) conference from the Touch Panel, you were not prompted for a conference password, even if a password was required for the meeting.With PCO, private meeting details were displayed on the Touch Panel, even if the Primary HDX system was not configured to Show Private Meeting Details.Known Issues and LimitationsFor UsersThe following table lists the known issues relevant to RPX HD end users.Feature DescriptionAudio/Video Calls The RPX will not accept any incoming audio calls when it is already in a video call.To avoid this issue, place outgoing audio calls instead of receiving incoming audio calls when you are already in a video call.When DTMF tones are heard during the process of dialing an audio call, the near-end and far-end audio is muted for a brief moment.If you hang up an incoming audio call and then immediately place an outgoing audio call, the RPX may not hang up the initial incoming audio call.To avoid this issue, wait five seconds between consecutive audio calls.If the RPX is in a single endpoint video call (such as with a VSX or HDX video conferencing system) and the Do Not Disturb feature on the RPX is disabled, an incoming call from a two-codec or three-codec system will cause the center camera on the RPX to momentarily move to the side before returning to its correct position.If the projectors are in sleep mode when an incoming video call is automatically accepted by the RPX, it may take up to 70 seconds for the projectors to automatically power up. During the 70 seconds that it takes for the projectors to warm up and show far-end video, the RPX meeting participants may not notice that the call has been established.To avoid this issue, verify that the projectors are powered up before placing or receiving any video calls.If the projectors are in sleep mode when a video call comes in, any codecs that are not being used will briefly show near-end video. This only occurs when the number of near-end codecs is more than the number of far-end codecs, such as when a RPX 400 on the near end receives an incoming call from an RPX 200 on the far end, or when either an RPX 400 or 200 receives an incoming call from a single endpoint (VSX or HDX).If you place a point-to-point call to an RMX Virtual Meeting Room (VMR) and then add a site to the call from the Conference List on the Meeting Composer screen (with the Enhanced UI only), the point-to-point call will be dropped and a multipoint call will be created with the VMR as a participant in that multipoint call.To avoid this, hang up the VMR call and then make a new call with the participants that you want in that call.If you are using Meeting Composer and you dial two audio sites concurrently, the Touch Panel may show that you are connected to the second audio number dialed when you are actually connected to the first number dialed.To avoid this issue, when want to connect to multiple audio sites or to both audio and video sites when using Meeting Composer, connect to the video sites first (if any), and then add the audio sites one at a time.When you place a call to an RMX VMR using the following syntax, the call will not go through: IP##MeetingRoomID.To avoid this issue, place the call using this syntax: MeetingRoomID@IP (for example,*************.130.21).Feature DescriptionAudio/Video Calls If you dial an incomplete IP address for a video call (for example, 172.16.254.), you may hear a ringing sound for approximately 90 seconds. Until the ringing ceases, you will be unable to place another call.Content If you share content using a laptop, for best results, set its input resolution to 1024x768 and its refresh rate to 75 Hz. This will ensure that the content image renders correctly.Document Cameras The Eye-10 document camera used in some custom solutions does not support the Freeze function that is available for other document camera models.Touch Panel/ User Interface If you press the Content button on the Touch Panel when no content source (such as a laptop) is connected to the RPX with the VGA cable, the Primary HDX codec will generate a hidden message on the Primary wall screen. The message states "PC input resolution and/or refresh rate not supported.” This message will not be visible onscreen because the RPX is programmed to picture mute all wall screens when the system is not in a call. If you establish a video call while the message is activated, the call will take longer than usual to connect. To avoid this issue, wait three seconds (during which time the message will time out) before placing a video call from the Touch Panel.In an audio call from an RPX to a cellular phone or analog phone, if the remote user disconnects the call first, the Touch Panel continues to show the audio call as in progress. To avoid this issue, manually press the Hang Up button after each audio call is completed. The RPX will not accept incoming audio or video calls when the Hang Up button is off hook.When searching for a site in the global directory with the Enhanced UI, up to nine characters can typically be displayed on the screen. However, depending on the width of the letters in the name, more or less of the site name may be truncated.With Meeting Composer, when dialing a phone number with more than 10 digits, or dialing anyotherlongstringsuchasextension@IP_address(ex:*************.130.201),the string will likely be truncated when displayed in the right-hand pane of the Touch Panel.If you place a point-to-point call to an RMX Virtual Meeting Room (VMR) and then add an audio-only site to the call, the two columns on the left side of the Meeting Composer screen in the Enhanced UI will go blank and the icons at the top of the columns will become grayed-out.When Polycom Conferencing for Microsoft Outlook (PCO) is used to schedule multiple meetings and you select one of the meetings on the Touch Panel, the details for that meeting display on the left side of the Touch Panel screen. If that meeting is cancelled, it is removed from the meeting list; however, the details of the cancelled meeting are still displayed on the left side of the Touch Panel screen.To fix this issue, simply select a different meeting from the meeting list.For AdministratorsThe following table lists the known issues relevant to RPX HD administrators.Feature DescriptionAudio/Video Calls When the primary codec answers an incoming video call, any HDX codecs that are not being used will automatically accept any other incoming video calls if the following conditions exist:1. The RPX 200 Series or RPX 400 Series is in a single endpoint video call with aVSX or HDX video conferencing system (video ad-hoc dialing).2. The RPX 400 is in a video call with an RPX 200 Series, a TPX™ 306M, or a TPX204M.To prevent unused codecs from accepting any incoming calls, use the Do Not Disturb timer. To change the amount of time before Do Not Disturb is activated, access the DoNotDisturbTimer field in the System_Config.ini file. In this field, you can enter a value between 10 and 300, or leave the value at 0 if you want to keep the feature disabled: DoNotDisturbTimer=x where x is the value (in seconds) of the desired timeoutperiod.For example, DoNotDisturbTimer=120 sets the parameter to 120 seconds.If you use the web UI to place a call that is not at the default call speed, the codecs will not automatically adjust to the same call speed. The Primary codec will connect at the call speed specified in the HDX web UI Call Quality field, but the remaining codecs will connect at the default call speed.To avoid this issue when placing a call using the web UI, connect to each codec individually at the desired call speed (if the desired call speed is different from the default).Avoid using the suffixes ‘1’, ‘2’, ‘3’, and ‘4’ for your audio speed dial name entries. Using these suffixes may cause the system to incorrectly interpret them as an ITP suite, instead of distinct audio speed dial entries.Avoid creating directory entries that have an “&” symbol in the name. If you do so, the entry will appear on the site list with the word “amp” in the name rather than the “&” symbol.When the RPX is in a call, sending Telnet commands to change the video format may not work properly.To avoid this issue, do not use Telnet commands to change the video format when the RPX is in a call.If you use the web UI to place a call that is not at the default call speed, the codecs will not automatically adjust to the same call speed. The Primary codec will connect at the call speed specified in the HDX web UI Call Quality field, but the remaining codecs will connect at the default call speed.To avoid this issue when placing a call using the web UI, connect to each codec individually at the desired call speed (if the desired call speed is different from the default).When an RPX calls another RPX in a point-to-point call, the codecs begin to connect one at a time. If network resources become limited, not all of the codecs may connect, which may make it appear that one of the projectors is not working properly. If a projector does not work correctly in a call, you should check if the codec connected. If it did not connect, reducing the call bandwidth may solve the issue.If your ITP environment is configured to use both the LDAP directory and H.323 Gatekeeper functions, and your speed dial entries are not IP addresses, video calls may take longer to connect due to the additional communication involved between the various components in the solution.Feature DescriptionControl System When you connect to the codecs through Telnet or through the Crestron Toolbox and use the command prompt, you may see “overflow buffer” and other error messages when you usethe Touch Panel. These errors also appear on the Crestron log. This issue does not affectsystem performance or functionality.Directory If you add a site from the CMA directory to the speed dial list and then later change the name of that site in the CMA, the speed dial entry name that is displayed on the Touch Panel maynot be updated.To fix this issue, reboot the codecs and the AV2 System Controller. Alternatively, from theHDX web UI, delete and re-add the renamed CMA site to the Speed Dial list.Microphones If you disconnect the Polycom Ceiling Microphone Arrays and then connect any microphones other than Ceiling Microphone Arrays, the proper stereo settings may be lost.If this occurs, launch the Polycom Telepresence Tool, make sure that all the HDX codecs areconnected, and then click Configure HDXs to set the microphones to their correct settings.Touch Panel/ User Interface If any of the HDX codecs are rebooted without rebooting the AV2 System Controller as well, the HDX UI remains onscreen.To avoid this issue, reboot the AV2 System Controller whenever any of the HDX codecs are rebooted. The VNOC, Service, and Site Administration teams are advised to reboot (power up) the AV2 System Controller after the HDX reboots (powers up) as part of the reset process or when recovering from a power failure. Placing a call without rebooting the AV2 System Controller will cause the Touch Panel to freeze.If you reboot the Primary HDX codec while the RPX is in an audio call (with the Help Desk, for example), the Hang Up button on the Touch Panel will freeze.To avoid this issue, reboot the AV2 System Controller when the Hang Up button enters that frozen state.Occasionally, the incorrect video format will be displayed on the Touch Panel Admin screen. To determine the correct video format:1. From the web UI, go to Admin Settings > Cameras.2. Check the Video Quality field for the camera being used. If VideoQuality=Sharpness, the video format is 1080p30; if Video Quality=Motion, thevideo format is 720p60.Alternatively, you can check the Video Format on the web UI Place a Call page.When initially loading the Crestron Touch Panel and then loading the AV2 System Controller, a Toolbox Results dialog box may appear at the end of the installation process. Although this dialog box displays an error message, the installation completed successfully.If users report that the Touch Panel seems to take an unusually long time to return directory information, check if there are LDAP entries in the directory that are no longer valid. If there are such entries, correct them.Where to Get the Latest Product InformationTo view the latest Polycom product documentation, visit the Support section of the Polycom website at .。
Polycom ISDN Gateway 2.0 发布说明说明书
RELEASE NOTES 2.0 | July 2018 | 3725-84364-002B Polycom® ISDN GatewayPolycom announces the 2.0 release of Polycom® ISDN Gateway Software. This document provides the latest information about this release.ContentsWhat’s New . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Security Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Version History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Language Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Resolved Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Known Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Interoperability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Copyright and Trademark Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7What’s NewPolycom ISDN Gateway 2.0 offers the following feature:●ISDN Gateway can register as a Network DeviceISDN Gateway Can Register as a Network Device Previously, the Polycom ISDN Gateway acted only as an endpoint to the gatekeeper. Polycom ISDN Gateway 2.0 can now register itself as a gateway. This enables users to dial an ISDN call using a Polycom®RealPresence® DMA® system prefix. You can also set up your deployment to use the load balancing features of RealPresence DMA system.The Polycom ISDN Gateway supports the following dialing platforms when registered to the RealPresence DMA system:●<Service prefix><ISDN number>●<Service prefix><Session profile prefix ><Dial string delimiter><ISDN number>●<Simplified ISDN Gateway Dialing prefix>Security UpdatesFor information about known and resolved security vulnerabilities, refer to the Polycom Security Center.Version HistoryThis following table lists the version history of Polycom ISDN Gateway.Version HistoryVersion Release Date Features2.0July 2018ISDN Gateway can register as a Network Device.1.0December 2016Initial release of the Polycom ISDN Gateway.Language SupportThe Polycom ISDN Gateway web interface provides support for the English language in this release.Resolved IssuesThe following table lists the resolved issues in Polycom ISDN Gateway.Resolved IssuesCategory Issue ID DescriptionCalling ISDNGW-917Lip sync issues might occur when there is a call between RealPresence Group500 system and the HDX 9004 system at a 128 bit rate via the ISDN Gateway. Content ISDNGW-921In a conference call, the HDX system cannot receive content from aRealPresence Group 500 system if it has previously sent content. Conference ISDNGW-919In a conference call, video is not displayed on the RealPresence Group 500system sent from the HDX 9004 system if the HDX 9004 system joins theconference last.Hardware ISDNGW-535The Polycom ISDN Gateway does not respond after reconnecting the V.35cable to the interface.Video ISDNGW-868When making ISDN calls from Cisco C and Cisco TelePresence SX Seriesendpoints to a RealPresence Group Series system through the ISDN Gateway,the video is inconsistent throughout the call at all endpoints.Web Interface ISDNGW-918The Polycom ISDN Gateway uses its self-signed certificates instead of thecertificates installed to access web interface.Web Interface ISDNGW-165Search options are not displayed under the Polycom ISDN Gateway Settings inthe Internet Explorer and Google Chrome browsers.Known IssuesThe following table lists the known issues and suggested workarounds for Polycom ISDN Gateway. Known IssuesCategory Issue ID Description WorkaroundAudio ISDNGW-821ISDNGW-995When an audio-only call is placed from aRealPresence Group Series system with stereoenabled, you might hear noise coming from theISDN Gateway.Disable stereo on theRealPresence GroupSeries system.Calling ISDNGW-363The Dual Port calling feature is not supportedon both V.35 ports in this release. Single PortV.35 calling is supported.NoneCalling ISDNGW-657An HDX system cannot control the far-endcamera control (FECC) when the RealPresenceGroup Series system hosts a conference callthrough the ISDN Gateway.NoneCalling ISDNGW-304The RealPresence Group Series system doesnot put an ISDN call on hold through thePolycom ISDN Gateway.NoneCalling ISDNGW-1086When the ISDN Gateway is connected via PRIto a DMS-100 switch using Line Trunk controller(LTC), you may experience PRI Linkfluctuations and random call disconnections.Hang up and redial the call.Calling ISDNGW-1103When a RealPresence Group Series system isregistered to RealPresence DMA and makes anISDN Gateway call, the call doesn’t connect ifthe RealPresence DMA routing settings forH.323 are set to Routed Mode in DMA.Choose Direct Mode in the RealPresence DMA H.323 routing settings or choose another dialing method from the RealPresence Group Series system.Calling, Video ISDNGW-1160ISDNGW-1161ISDNGW-1134During a conference call, a participant joiningthe conference through a serial port endpointmay experience intermittent scrambled or black video.NoneCalling, Video ISDNGW-1158When a RealPresence Group Series systemcalls another system that uses H.263 via ISDNGateway, occasionally video freezing is noticed.Hang up and redial the call.Conference, Content ISDNGW-1118When a RealPresence Group Series systemplaces a conference call via ISDN Gateway to aCisco TelePresence Edge 95 MXP followed bya call to another RealPresence Group Seriessystem via two ISDN Gateways and sharescontent, the second RealPresence GroupSeries system does not receive content.The Cisco MXP systemmust hang up and rejoin thecall.LimitationsThe following table lists the limitations of features and functionalities in this release.Conference ISDNGW-1102 A RealPresence Group Series system via ISDNGateway fails to join a conference call thatrequires a password to join.None Provisioning ISDNGW-211The Polycom ISDN Gateway, and anyendpoints, are unable to unregister from theRealPresence Resource Manager system.NoneISDN Gateway Limitations Category Issue no.Description Workaround Calling ISDNGW-1002Cisco endpoints do not allow encryptedconference calls with a RealPresence GroupSeries system. Instead, the Cisco ISDNTelepresence link goes down, and the CiscoSX20 system disconnects from theconference.None Calling ISDNGW-1003When a RealPresence Group Series systemcalls two Cisco MXP systems in a three-partyconference call via the ISDN Gateway, allparticipants can hear intermittent scratchingaudio throughout the call.Hang up and redial into the conference call.Calling ISDNGW-1056When a RealPresence Group Series systemcalls two LifeSize systems via the ISDNGateway, the second LifeSize system in theconference can’t share content with the otherparticipants.The first LifeSize participant must hang up and rejoin the call so the second LifeSize participant can share content.Calling ISDNGW-1088When a RealPresence Group Series systemcalls a LifeSize Team 220 system at 128 kbps,the RealPresence Group Series systemreceives blurry video.None Software Updates ISDNGW-931Users can’t update the ISDN Gatewaysoftware version 1.0 with the default serveraddress (polycom).Upgrade the software using either the USB flash drive or manual update methods asoutlined in the Polycom ISDNGateway Administrator andIntegrator Guide .Known IssuesCategoryIssue ID Description WorkaroundInteroperabilityVideo conferencing systems use a variety of algorithms to compress audio and video. In a call between two systems, each end transmits audio and video using algorithms supported by the other end. In some cases, a system might transmit a different algorithm than it receives.This process occurs because each system independently selects the optimum algorithms for a particular call, and different products might make different selections. This process should not affect the quality of the call.Supported Web BrowsersThe Polycom ISDN Gateway web interface is supported on the following web browsers and operating systems:●Windows® Internet Explorer 11 on Windows 8●Google Chrome 60.0.3112.113 on Windows 8●Mozilla Firefox 44 on Windows 8Products Tested in this ReleasePolycom ISDN Gateway systems are tested extensively with a wide range of products. The following list is not a complete inventory of compatible equipment. It simply indicates the products that have been tested for compatibility with this release.Polycom strives to support any system that is standards-compliant and investigates reports of Polycom systems that are not interoperable with other vendor systems.Polycom recommends that you upgrade all of your Polycom systems with the latest softwareversions. Any compatibility issues may already have been addressed by software updates. Go toPolycomService/support/us/support/service_policies.html to see the Current Polycom InteroperabilityMatrix.Product Software Versions Gatekeepers Software VersionsPolycom®RealPresence® DMA® 70009.0.1H.323 Endpoints Software VersionsPolycom® ISDN Gateway 2.0.0Polycom® RealPresence® Group Series 310/500/700 6.1.5ISDN Endpoints Software VersionsPolycom® HDX® 7000/8000/9000 3.1.12MCU Software Versions Software VersionsProduct Software VersionsPolycom® RealPresence® Collaboration Server (RMX) 18008.7.4.23Polycom® RealPresence® Collaboration Server (RMX) 15008.5.12.39Polycom® RealPresence® Collaboration Server (RMX) 4000 with MPMrX8.7.4.23Third-Party Endpoints Software VersionsCisco TelePresence Codec C40 with Telepresence ISDN Link7.3.8Cisco TelePresence SX20 with Telepresence ISDN Link8.2.2Cisco ISDN Telepresence Link IL1.1.6a337554LifeSize Express 220 with Networker 5.0.9 (2)LifeSize Team 220 with Networker 5.0.9 (2)LifeSize Networker LS_NW1.3.1.3 (2)Cisco Edge 95 MXP F9.3.4Cisco 880 MXP F9.3.4Peripherals Software VersionsPolycom® RealPresence® Touch OS 6.1.5-279/TP 6.1.5-360613 Polycom® Touch Control OS 6.1.5-1706/TP 6.1.5-360613Get HelpFor more information about installing, configuring, and administering Polycom products, refer to Documents and Downloads at Polycom Support.To find all Polycom partner solutions, see Polycom Global Strategic Partner Solutions.The Polycom CommunityThe Polycom Community gives you access to the latest developer and support information. Participate in discussion forums to share ideas and solve problems with your colleagues. To register with the Polycom Community, create a Polycom online account. When logged in, you can access Polycom support personnel and participate in developer and support forums to find the latest information on hardware, software, and partner solutions topics.Copyright and Trademark InformationCopyright© 2018, Polycom, Inc. All rights reserved. No part of this document may be reproduced, translated into another language or format, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Polycom, Inc.6001 America Center DriveSan Jose, CA 95002USATrademarks Polycom®, the Polycom logo and the names and marks associated with Polycom products are trademarks and/or service marks of Polycom, Inc. and are registered and/or common law marks in the United States and various other countries.All other trademarks are property of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, for any purpose other than the recipient's personal use, without the express written permission of Polycom.Disclaimer While Polycom uses reasonable efforts to include accurate and up-to-date information in this document, Polycom makes no warranties or representations as to its accuracy. Polycom assumes no liability or responsibility for any typographical or other errors or omissions in the content of this document.Limitation of Liability Polycom and/or its respective suppliers make no representations about the suitability of the information contained in this document for any purpose. Information is provided "as is" without warranty of any kind and is subject to change without notice. The entire risk arising out of its use remains with the recipient. In no event shall Polycom and/or its respective suppliers be liable for any direct, consequential, incidental, special, punitive or other damages whatsoever (including without limitation, damages for loss of business profits, business interruption, or loss of business information), even if Polycom has been advised of the possibility of such damages.End User License Agreement BY USING THIS PRODUCT, YOU ARE AGREEING TO THE TERMS OF THE END USER LICENSE AGREEMENT (EULA) AT: /indexes/licenses. IF YOU DO NOT AGREE TO THE TERMS OF THE EULA, DO NOT USE THE PRODUCT, AND YOU MAY RETURN IT IN THE ORIGINAL PACKAGING TO THE SELLER FROM WHOM YOU PURCHASED THE PRODUCT.Patent Information The accompanying product may be protected by one or more U.S. and foreign patents and/or pending patent applications held by Polycom, Inc.Open Source Software Used in this Product This product may contain open source software. You may receive the open source software from Polycom up to three (3) years after the distribution date of the applicable product or software at a charge not greater than the cost to Polycom of shipping or distributing the software to you. To receive software information, as well as the open source software code used in this product, contact Polycom by email at***************************.Customer Feedback We are striving to improve our documentation quality and we appreciate your feedback. Email your opinions and comments to *********************************.Polycom Support Visit the Polycom Support Center for End User License Agreements, software downloads, product documents, product licenses, troubleshooting tips, service requests, and more.。
VIAVI T-BERD MTS-5800 一向延迟测量指南说明书
Quick CardT-BERD®/MTS-5800 Network TesterOne Way Delay (OWD) MeasurementThis document outlines how to set T-BERD/MTS 5800’s to measure One Way Delay on Ethernet datalinks at rates up to 100Gbps.Equipment Requirements:•Two T-BERD/MTS-5800’s equipped withthe following:o BERT software release V27.0 or greatero Test options:▪Ethernet and One Way Delay:▪C510M1GE and C5OWD for 1Gigabitor less▪C510GELAN and C5OWD for 10Gig▪C525GE and C5100GOWD for 25Gig▪C540GE and C5100GOWD for 40Gig▪C5100GE and C5100GOWD for100Gigabit Ethernet▪GNSS/GPS (VIAVI Part# C5GNSS)•GNSS Antenna (Taoglas AA.171,VIAVI Part# C5ANTENNA)•SFP, QSFP, or CFP4 optical transceiver tomatch the line under test•Jumper Cables to match the opticalFigure 1: Equipment Requirements transceiver and the line under test•Fiber optic inspection microscope(VIAVI P5000i or FiberChek Probe)•Fiber Optic Cleaning suppliesThe following information is required to configure the test:•Physical Interface (10/100/1000BASE-T, 1000BASE-LX, 10GBASE-LR, 100GBASE-LR4, etc.) •Auto Negotiation settings of the port under test•VLAN ID (if encapsulation = VLAN)Fiber Inspection Guidelines:•Use the VIAVI P5000i or FiberChek Probemicroscope to inspect the jumper cableor loopback plug before connection tothe optical transceiver.•Focus the fiber on the screen. If dirty,clean the connector.•If it appears clean, run inspection test.•If it fails, clean the fiber and re-runFigure 2: Inspect Before You Connect inspection test.•Repeat until it passes.Connect Each T-BERD to Port Under Test: 1.For copper 10/100/1000BASE-T interfacetesting with the T-BERD/MTS 5800v2 or T-BERD/MTS 5882, connect the Port 110/100/1000 RJ-45 jack to the port under test using CAT 5E or better cable.2.For copper 10/100/1000BASE-T interfacetesting with the T-BERD/MTS 5800-100G,insert a copper SFP into the Port 1SFP+/SFP28 slot and connect to the portunder test using CAT 5E or better cable. 3.For optical interfaces:•Insert desired SFP, QSFP, or CFP4 into the Port 1 slot on the top of theT-BERD/MTS.•Inspect and, if necessary, clean all SFPs, fibers, and bulkheads, as described onpage 1.4.Connect the SFP, QSFP, or CFP4 to the portunder test using a Single Mode orMultimode jumper cable compatible withthe interface under test.Figure 3: T-BERD 5800v2Figure 4: T-BERD 5882 Figure 5: T-BERD 5800-100GLaunch and Configure Tests:1.Press the Power button to turn on thetest set.2.Enable the Timing Expansion Module (TEM)or Internal GNSS Receiver and complete asurvey, as documented in “T-BERD®/MTS-5800 Network Tester, Enabling the GNSS/GPSReceiver for Sky Plot, One-Way Delay, andSy nc Measurements” Quick Card.ing the Select Test menu, Quick Launchmenu, or Job Manager, launch anEthernet, Layer 2 Traffic, Terminate test onport 1 for the desire physical interface. Forexample: Ethernet►10/100/1000►Layer 2 Traffic►P1 Terminate.4.If the test is not in the default settings, tapthe Tools icon , and select.Press to continue.Figure 6: T-BERD 5882/T-BERD 5800-100G Internal GNSSFigure 7: Ethernet Layer 2 Traffic Test5.Verify that the ToD Sync and 1 PPS SyncLEDs are both green. If they are not green,check your TEM or GNSS Receiver Setup.6.Press the Setup Soft Key, to displaythe Interface settings tab.Figure 8: Time Source LEDs 7.If you are testing a 10/100/1000 Electricalor 1GigE Optical tests with auto negotiationdisabled, select the Physical Layer tab andconfigure settings to match the Ethernetport under test.8.Select the GPS/CDMA tab and tap (check)the checkbox to Enable GPS Receiver.Figure 9: GPS/CDMA Receiver Setup 9.Select the Ethernet tab to configureEthernet settings.•Tap [ DA ] to display the DestinationMAC Address. Enter the MAC Addressof the T-BERD/MTS at the far end of theline under test.•Tap [ SA ] to display the factorydefault Source MAC Address of yourT-BERD/MTS. Provide this address tothe operator of the other T-BERD/MTS,upon request.Figure 10: Ethernet Setup •If you are testing a port that requiresVLAN encapsulation, set Encapsulationto VLAN, tap [ VLAN ] and enter yourVLAN ID.•If you wish to measure Bit Error Rate,tap [ Data ] and set ActernaPayload to BERT.Contact Us +1 844 GO VIAVI(+1 844 468 4284)To reach the VIAVI office nearest you,visit /contacts.© 2018 VIAVI Solutions Inc.Product specifications and descriptions in thisdocument are subject to change without notice.10.Select the Traffic tab to configure Trafficsettings.•Set Load Unit to Bit Rate.•Set Load to the desired traffic rate orCommitted Information Rate (CIR).11.Press the Results Soft Key, , to viewthe Results screen.Figure 11: Traffic Setup 12.For 1GigE to 100GigE optical tests, selectthe Laser tab in the Action panel,and press. The button will turn yellow and berelabeled .13.A green Signal Present LED ● indicates theT-BERD/MTS is receiving an optical signalfrom the port under test. Green SyncAcquired and Link Active LEDs indicate theT-BERD/MTS has successfully connected tothe port under test and the link is active.Figure 12: Results 14.Tap the Actions tab and tap the Start Trafficbutton . The button will turn yellowand be relabeled .15.Instruct the operator of the otherT-BERD/MTS to also Start Traffic.16.Press the Restart Soft Key on the rightside of the screen. Verify that:•The Right Results window shows “RxMbps, L1” is approximately equal tothe CIR.•The Right Results window shows LostFrames = 0.17.Allow the Test to run for the desiredduration. Verify that the Left Resultwindow displays “ALL SUMMARY RESULTSOK” throughout the test.18.Swipe up or scroll down in the Right ResultsDisplay to display One Way Delay results.Figure 13: Start TrafficFigure 14: One Way Delay results。
Elkay Lustertone三壳陶瓷顶部安装洗碗机说明书
Elkay REV 12152017 LGR4322
2222 Camden Court Oak Brook, IL 60523
© 2017 Page 2 LGR4322_spec.pdf
Elkay REV 12152017 LGR4322
2222 Camden Court Oak Brook, IL 60523
© 2017 Page 1 LGR4322_spec.pdf
SPECIFICATIONS
Elkay Lustertone Stainless Steel 43" x 22" x 10" Triple Bowl Top Mount Sink Model(s) LGR4322
Cutout Dimensions for Top Mount Installation: 42-3/8" x 21-3/8" (1076mm x 543mm) with 1-1/2" (38mm) corner radius
Hole Drilling Configurations:
AMERICAN PRIDE. A LIFETIME TRADITION. Like your family, the Elkay family has values and traditions that endure. For almost a century, Elkay has been a family-owned and operated company, providing thousands of jobs that support our families and communities.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
CheckTÀI SẢN Mã sốThuyết minh A- TÀI SẢN NGẮN HẠNI. Tiền và các khoản tương đương tiền1. Tiền2. Các khoản tương đương tiềnII. Các khoản đầu tư tài chính ngắn hạn1. Đầu tư ngắn hạn2. Dự phòng giảm giá đầu tư ngắn hạn*III. Các khoản phải thu ngắn hạn1. Phải thu khách hàng2. Trả trước cho người bán3. Phải thu nội bộ ngắn hạn4. Phải thu theo tiến độ kế hoạch hợp đồng xây dựng5. Các khoản phải thu khác6. Dự phòng phải thu ngắn hạn khó đòi*IV. Hàng tồn kho1. Hàng tồn kho2. Dự phòng giảm giá hàng tồn kho*V. Tài sản ngắn hạn khác1. Chi phí trả trước ngắn hạn2. Thuế GTGT được khấu trừ3. Thuế và các khoản phải thu NN4. Tài sản ngắn hạn khácB- TÀI SẢN DÀI HẠNI. Các khoản phải thu dài hạn1. Phải thu dài hạn của khách hàng2. Vốn kinh doanh ở đơn vị trực thuộc3. Phải thu nội bộ dài hạn4. Phải thu dài hạn5. Dự phòng phải thu dài hạn khó đòi*II. Tài sản cố định1. Tài sản cố định hữu hình- Nguyên giá- Giá trị hao mòn lũy kế*2. Tài sản cố định thuê tài chính- Nguyên giá- Giá trị hao mòn lũy kế*3. Tài sản cố định vô hình- Nguyên giá- Giá trị hao mòn lũy kế*4. Chi phí xây dựng cơ bản dở dangIII. Bất động sản đầu tư- Nguyên giá- Giá trị hao mòn lũy kế*IV. Các khoản đầu tư tài chính dài hạn1. Đầu tư vào công ty con2. Đầu tư vào công ty liên kết, liên doanh3. Đầu tư dài hạn khác4. Dự phòng giảm giá đầu tư tài chính dài hạn* V. Tài sản dài hạn khác1. Chi phí trả trước dài hạn2. Tài sản thuế thu nhập hoãn lại3. Tài sản dài hạn khácTỔNG CỘNG TÀI SẢNNGUỒN VỐNA- Nợ phải trảI. Nợ ngắn hạn1. Vay và nợ ngắn hạn2. Phải trả người bán3. Người mua trả tiền trước4. Thuế và các khoản phải nộp NN5. Phải trả người lao động6. Chi phí phải trả7. Phải trả nội bộ8. Phải trả theo tiến độ kế hoạch HĐ xây dựng9. Các khoản phải trả, phải nộp ngắn hạn khác10. Dự phòng phải trả ngắn hạnII. Nợ dài hạn1. Phải trả dài hạn người bán2. Phải trả dài hạn nội bộ3. Phải trả dài hạn khác4. Vay và nợ dài hạn5. Thuế thu nhập hoãn lại phải trả6. Dự phòng trợ cấp mất việc làm7. Dự phòng phải trả dài hạnB-Vốn chủ sở hữuI. Vốn chủ sở hữu1. Vốn đầu tư của chủ SH2. Thặng dư vốn cổ phần3. Vốn khác của chủ SH4. Cổ phiếu quỹ*5. Chênh lệch đánh giá lại TS6. Chênh lệch tỷ giá hối đoái7. Quỹ đầu tư phát triển8. Quỹ dự phòng tài chính9. Quỹ khác thuộc vốn chủ SH10. Lợi nhuận sau thuế chưa phân phối11. Nguồn vốn đầu tư XDCBII. Nguồn kinh phí và quỹ khác1. Quỹ khen thưởng, phúc lợi2. Nguồn kinh phí3. Nguồn kinh phí đã hình thành TSCĐTỔNG CỘNG NGUỒN VỐN1Nợ TK 156400,000,000 Có TK 331Nợ TK 331400,000,000 Có TK 1112Nợ TK 2111,400,000,000 Có TK 331Nợ TK 3311,400,000,000 Có TK 111Có TK 3413Nợ TK 211800,000,000 Có TK 3314Nợ TK 211300,000,000 Có TK 1115Nợ TK 211600,000,000 Có TK 331Nợ TK 331450,000,000 Có TK 1116a Tính tiền lương phải trả hàng thángNợ TK 64230,000,000 Có TK 3346b Thanh toán lương hàng tháng bằng TMNợ TK 33430,000,000 Có TK 1116c Tính tiền điện, nước, điện thoại phải trả hàng thángNợ TK 64210,000,000 Có TK 3316d Thanh toán tiền điện, nước, điện thoại hàng tháng bằng TMNợ TK 33110,000,000 Có TK 1116e Thanh toán chi phí bằng tiền khácNợ TK 64220,000,000 Có TK 1117Kỳ hạn trả nợ vay ngân hàng sau 03 năm (chưa ảnh hưởng)Yêu cầu:1Có thể tiến hành thành lập DN với số tiền hiện có không?Không, vì số tiền hiện có không đủ để chi tiêu theo phươngán kinh doanh.-710,000,0002Yêu cầu nhà cung cấp X cho nợ lại một phần tiền mua hàng, số tiền bao nhiêu? 400,000,000 (Thanh toán 100% bằng TM)Yêu cầu cho nợ 80% 320,000,0003Yêu cầu nhà cung cấp Z cho nợ lại một phần tiền mua hàng,số tiền bao nhiêu? 600,000,000 (Thanh toán 75% bằng TM cho nhà cung cấp Z, nợ 25%)Yêu cầu cho nợ thêm 65% 390,000,000 Với hai yêu cầu nhà cung cấp X và Z cho nợ lại tổng số tiền:710,000,000 vừa đủ để ông Kiến Trung có thể thành lập DN với số tiền hiện có.Số cuối kỳPhát sinh (+/-)Số đầu năm -310,000,000 1,200,000,000 -710,000,000 1,200,000,000 -710,000,000 -1,910,000,000 1,200,000,000 00000400,000,0000 400,000,000400,000,000003,100,000,0000 003,100,000,0000 3,100,000,0000 3,100,000,0003,100,000,00000000000002,790,000,0001,200,000,000 1,650,000,0000 950,000,0000 0950,000,000950,000,00000700,000,0000 0700,000,000700,000,0001,140,000,0001,200,000,000 1,140,000,0001,200,000,000 1,200,000,0001,200,000,000 0-60,000,000 -60,000,000002,790,000,0001,200,000,000400,000,000400,000,0001,400,000,000700,000,000700,000,000800,000,000300,000,000600,000,000450,000,00030,000,00030,000,00010,000,00010,000,00020,000,000-390,000,000-65%。