Desipramine_hydrochloride_SDS_MedChemExpress

合集下载

MK2-IN-1_hydrochloride_SDS_MedChemExpress

MK2-IN-1_hydrochloride_SDS_MedChemExpress

Inhibitors, Agonists, Screening LibrariesSafety Data Sheet Revision Date:Jul.-24-2017Print Date:Jul.-24-20171. PRODUCT AND COMPANY IDENTIFICATION1.1 Product identifierProduct name :MK2-IN-1 (hydrochloride)Catalog No. :HY-12834ACAS No. :1314118-94-91.2 Relevant identified uses of the substance or mixture and uses advised againstIdentified uses :Laboratory chemicals, manufacture of substances.1.3 Details of the supplier of the safety data sheetCompany:MedChemExpress USATel:609-228-6898Fax:609-228-5909E-mail:sales@1.4 Emergency telephone numberEmergency Phone #:609-228-68982. HAZARDS IDENTIFICATION2.1 Classification of the substance or mixtureNot a hazardous substance or mixture.2.2 GHS Label elements, including precautionary statementsNot a hazardous substance or mixture.2.3 Other hazardsNone.3. COMPOSITION/INFORMATION ON INGREDIENTS3.1 SubstancesSynonyms:MK2 InhibitorFormula:C27H26Cl2N4O2Molecular Weight:509.43CAS No. :1314118-94-94. FIRST AID MEASURES4.1 Description of first aid measuresEye contactRemove any contact lenses, locate eye-wash station, and flush eyes immediately with large amounts of water. Separate eyelids with fingers to ensure adequate flushing. Promptly call a physician.Skin contactRinse skin thoroughly with large amounts of water. Remove contaminated clothing and shoes and call a physician.InhalationImmediately relocate self or casualty to fresh air. If breathing is difficult, give cardiopulmonary resuscitation (CPR). Avoid mouth-to-mouth resuscitation.IngestionWash out mouth with water; Do NOT induce vomiting; call a physician.4.2 Most important symptoms and effects, both acute and delayedThe most important known symptoms and effects are described in the labelling (see section 2.2).4.3 Indication of any immediate medical attention and special treatment neededTreat symptomatically.5. FIRE FIGHTING MEASURES5.1 Extinguishing mediaSuitable extinguishing mediaUse water spray, dry chemical, foam, and carbon dioxide fire extinguisher.5.2 Special hazards arising from the substance or mixtureDuring combustion, may emit irritant fumes.5.3 Advice for firefightersWear self-contained breathing apparatus and protective clothing.6. ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency proceduresUse full personal protective equipment. Avoid breathing vapors, mist, dust or gas. Ensure adequate ventilation. Evacuate personnel to safe areas.Refer to protective measures listed in sections 8.6.2 Environmental precautionsTry to prevent further leakage or spillage. Keep the product away from drains or water courses.6.3 Methods and materials for containment and cleaning upAbsorb solutions with finely-powdered liquid-binding material (diatomite, universal binders); Decontaminate surfaces and equipment by scrubbing with alcohol; Dispose of contaminated material according to Section 13.7. HANDLING AND STORAGE7.1 Precautions for safe handlingAvoid inhalation, contact with eyes and skin. Avoid dust and aerosol formation. Use only in areas with appropriate exhaust ventilation.7.2 Conditions for safe storage, including any incompatibilitiesKeep container tightly sealed in cool, well-ventilated area. Keep away from direct sunlight and sources of ignition.Recommended storage temperature:Powder-20°C 3 years4°C 2 yearsIn solvent-80°C 6 months-20°C 1 monthShipping at room temperature if less than 2 weeks.7.3 Specific end use(s)No data available.8. EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parametersComponents with workplace control parametersThis product contains no substances with occupational exposure limit values.8.2 Exposure controlsEngineering controlsEnsure adequate ventilation. Provide accessible safety shower and eye wash station.Personal protective equipmentEye protection Safety goggles with side-shields.Hand protection Protective gloves.Skin and body protection Impervious clothing.Respiratory protection Suitable respirator.Environmental exposure controls Keep the product away from drains, water courses or the soil. Cleanspillages in a safe way as soon as possible.9. PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical propertiesAppearance Pink to red (Solid)Odor No data availableOdor threshold No data availablepH No data availableMelting/freezing point No data availableBoiling point/range No data availableFlash point No data availableEvaporation rate No data availableFlammability (solid, gas)No data availableUpper/lower flammability or explosive limits No data availableVapor pressure No data availableVapor density No data availableRelative density No data availableWater Solubility No data availablePartition coefficient No data availableAuto-ignition temperature No data availableDecomposition temperature No data availableViscosity No data availableExplosive properties No data availableOxidizing properties No data available9.2 Other safety informationNo data available.10. STABILITY AND REACTIVITY10.1 ReactivityNo data available.10.2 Chemical stabilityStable under recommended storage conditions.10.3 Possibility of hazardous reactionsNo data available.10.4 Conditions to avoidNo data available.10.5 Incompatible materialsStrong acids/alkalis, strong oxidising/reducing agents.10.6 Hazardous decomposition productsUnder fire conditions, may decompose and emit toxic fumes.Other decomposition products - no data available.11.TOXICOLOGICAL INFORMATION11.1 Information on toxicological effectsAcute toxicityClassified based on available data. For more details, see section 2Skin corrosion/irritationClassified based on available data. For more details, see section 2Serious eye damage/irritationClassified based on available data. For more details, see section 2Respiratory or skin sensitizationClassified based on available data. For more details, see section 2Germ cell mutagenicityClassified based on available data. For more details, see section 2CarcinogenicityIARC: No component of this product present at a level equal to or greater than 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.ACGIH: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by ACGIH.NTP: No component of this product present at a level equal to or greater than 0.1% is identified as a anticipated or confirmed carcinogen by NTP.OSHA: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by OSHA.Reproductive toxicityClassified based on available data. For more details, see section 2Specific target organ toxicity - single exposureClassified based on available data. For more details, see section 2Specific target organ toxicity - repeated exposureClassified based on available data. For more details, see section 2Aspiration hazardClassified based on available data. For more details, see section 212. ECOLOGICAL INFORMATION12.1 ToxicityNo data available.12.2 Persistence and degradabilityNo data available.12.3 Bioaccumlative potentialNo data available.12.4 Mobility in soilNo data available.12.5 Results of PBT and vPvB assessmentPBT/vPvB assessment unavailable as chemical safety assessment not required or not conducted.12.6 Other adverse effectsNo data available.13. DISPOSAL CONSIDERATIONS13.1 Waste treatment methodsProductDispose substance in accordance with prevailing country, federal, state and local regulations.Contaminated packagingConduct recycling or disposal in accordance with prevailing country, federal, state and local regulations.14. TRANSPORT INFORMATIONDOT (US)This substance is considered to be non-hazardous for transport.IMDGThis substance is considered to be non-hazardous for transport.IATAThis substance is considered to be non-hazardous for transport.15. REGULATORY INFORMATIONSARA 302 Components:No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.SARA 313 Components:This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.SARA 311/312 Hazards:No SARA Hazards.Massachusetts Right To Know Components:No components are subject to the Massachusetts Right to Know Act.Pennsylvania Right To Know Components:No components are subject to the Pennsylvania Right to Know Act.New Jersey Right To Know Components:No components are subject to the New Jersey Right to Know Act.California Prop. 65 Components:This product does not contain any chemicals known to State of California to cause cancer, birth defects, or anyother reproductive harm.16. OTHER INFORMATIONCopyright 2017 MedChemExpress. The above information is correct to the best of our present knowledge but does not purport to be all inclusive and should be used only as a guide. The product is for research use only and for experienced personnel. It must only be handled by suitably qualified experienced scientists in appropriately equipped and authorized facilities. The burden of safe use of this material rests entirely with the user. MedChemExpress disclaims all liability for any damage resulting from handling or from contact with this product.Caution: Product has not been fully validated for medical applications. For research use only.Tel: 609-228-6898 Fax: 609-228-5909 E-mail: tech@Address: 1 Deer Park Dr, Suite Q, Monmouth Junction, NJ 08852, USA。

SDSE所有详细试剂配方

SDSE所有详细试剂配方

SDSE所有详细试剂配方SDSE(Sodium dodecyl sulfate-electrolyte system)是一种常用的聚丙烯酰胺凝胶电泳缓冲液,主要用于蛋白质电泳分离。

SDSE的制备是根据一定的配方进行的,下面是SDSE的详细试剂配方:1.氯化钠(NaCl):18.3g溶解在1L去离子水中2.磷酸二氢钠(NaH2PO4):3.5g溶解在1L去离子水中3. 溴酚蓝(Bromophenol Blue):0.25g溶解在10mL水中4. SDS(Sodium Dodecyl Sulfate):10g溶解在1L去离子水中5. 甘油(Glycerol):10mL溶解在100mL去离子水中以上是SDSE的基础配方,下面是其制备步骤:1.将NaCl和NaH2PO4溶解在分别容量为1L的去离子水中,用磁力搅拌器搅拌均匀。

2.分别将溶解好的NaCl和NaH2PO4溶液倒入大容量烧杯中,混合均匀。

3.在pH计的帮助下调节缓冲液的pH值,使其在6.8-7.0之间。

4.加入溴酚蓝溶液,此时溴酚蓝的浓度为0.0025%,用磁力搅拌器搅拌均匀。

5.加入SDS溶液,用磁力搅拌器搅拌均匀。

注意,加入SDS时要小心,避免溅出。

6.最后加入甘油溶液,搅拌均匀。

甘油的添加主要是为了增加样品的密度,使其在凝胶中下沉更快。

SDSE的配方比较简单,主要成分包括NaCl、NaH2PO4、溴酚蓝、SDS和甘油。

其中,NaCl和NaH2PO4是缓冲液的主要组成部分,用于维持适当的离子强度和pH值;溴酚蓝用于着色样品,方便观察电泳结果;SDS主要起到断开蛋白质的二级结构和线性化作用;甘油则用于增加样品密度,使其在凝胶中下沉更快。

通过恰当的配方和制备步骤,可以获得高质量的SDSE缓冲液,用于蛋白质电泳分离和分析。

但需要注意的是,不同实验目的和要求可能需要微调配方中一些成分的浓度,因此在具体实验过程中,可以根据需要进行相应的调整。

有机化学中常见缩写

有机化学中常见缩写

Ac Acetyl 乙酰基DMAP 4-dimethylaminopyridine 4-二甲氨基吡啶acac Acetylacetonate 乙酰丙酮基DME dimethoxyethane 二甲醚AIBN Azo-bis-isobutryonitrile 2,2'-二偶氮异丁腈DMF N,N'-dimethylformamide 二甲基甲酰胺aq. Aqueous 水溶液dppf bis (diphenylphosphino)ferrocene 双(二苯基膦基)二茂铁9-BBN 9-borabicyclo[3.3.1]nonane 9-硼二环[3.3.1]壬烷dppp 1,3-bis (diphenylphosphino)propane 1,3-双(二苯基膦基)丙烷BINAP (2R,3S)-2,2’-bis (diphenylphosphino)-1,1’-binaphthyl(2R,3S)-2.2'-二苯膦-1.1'-联萘亦简称为联二萘磷BINAP是日本名古屋大学的Noyori(2001年诺贝尔奖)发展的一类不对称合成催化剂dvb Divinylbenzene 二乙烯苯Bn Benzyl 苄基e- Electrolysis 电解BOC t-butoxycarbonyl 叔丁氧羰基(常用于氨基酸氨基的保护)%ee % enantiomeric excess 对映体过量百分比(不对称合成术语)%de % diasteromeric excess 非对映体过量百分比(不对称合成术语)Bpy (Bipy) 2,2’-bipyridyl 2,2'-联吡啶EDA (en) ethylenediamine 乙二胺Bu n-butyl 正丁基EDTA Ethylenediaminetetraacetic acid 乙二胺四乙酸二钠Bz Benzoyl 苯甲酰基EE 1-ethoxyethyl 乙氧基乙基c- Cyclo 环-Et Ethyl 乙基FMN Flavin mononucleotide 黄素单核苷酸CAN Ceric ammonium nitrate 硝酸铈铵Cat. Catalytic 催化Fp flash point 闪点CBz Carbobenzyloxy 苄氧羰基FVP Flash vacuum pyrolysis 闪式真实热解法h hours 小时Min Minute 分钟hv Irradiation with light 光照COT 1,3,5-cyclooctatrienyl 1,3,5-环辛四烯1,5-HD 1,5-hexadienyl 1,5-己二烯Cp Cyclopentadienyl 环戊二烯基HMPA Hexamethylphosphoramide 六甲基磷酸三胺CSA 10-camphorsulfonic acid 樟脑磺酸HMPT Hexamethylphosphorus triamide 六甲基磷酰胺CTAB Cetyltrimethylammonium bromide 十六烷基三甲基溴化铵(相转移催化剂)iPr isopropyl 异丙基Cy Cyclohexyl 环己基LAH Lithium aluminum hydride 氢化铝锂(LiAlH4)LDA Lithium diisopropylamide 二异丙基氨基锂(有机中最重要一种大体积强碱)2 有机化学合成常见缩写dba Dibenzylidene acetone 苄叉丙酮LHMDS Lithium hexamethyldisilazideDBE 1,2-dibromoethane 1,2- 二溴乙烷LTBA Lithium tri-tert-butoxyaluminum hydrideDBN 1,8-diazabicyclo[5.4.0]undec-7-ene 二环[5.4.0]-1,8-二氮-7-壬烯mCPBA meta-cholorperoxybenzoic acid 间氯过苯酸DBU 1,5-diazabicyclo[4.3.0]non-5-ene 二环[4.3.0]-1,5-二氮-5-十一烯Me Methyl 甲基DCC 1,3-dicyclohexylcarbodiimide 1,3-二环己基碳化二亚胺MEM b-methoxyethoxymethyl 甲氧基乙氧基甲基-DCE 1,2-dichloroethane 1,2-二氯乙烷Mes Mesityl 均三甲苯基(也就是1,3,5-三甲基苯基)不知对不对?DDQ 2,3-dichloro-5,6-dicyano-1,4-benzoquinone 2,3-二氯-5,6-二氰-1,4-苯醌MOM methoxymethyl 甲氧甲基DEA Diethylamine 二乙胺Ms Methanesulfonyl 甲基磺酰基(保护羟基用)TBDMS, TBS t-butyldimethylsilyl 叔丁基二甲基硅烷基(羟基保护基)DEAD Diethyl azodicarboxylate 偶氮二甲酸二乙酯MS Molecular sieves (3 or 4 )分子筛Dibal-H Diisobutylaluminum hydride 二异丁基氢化铝MTM Methylthiomethyl 二甲硫醚diphos (dppe) 1,2-bis (diphenylphosphino)ethane 1,2-双(二苯基膦)乙烷Naphth Naphthyl 萘基diphos-4 (dppb) 1,4-bis (diphenylphosphino)butane 1,2-双(二苯基膦)丁烷NBD Norbornadiene 二环庚二烯(别名:降冰片二烯)NBS N-Bromosuccinimide N-溴代丁二酰亚胺别名:N-溴代琥珀酰亚胺NCS N-chlorosuccinimide N-氯代丁二酰亚胺. 别名:N-氯代琥珀酰亚胺TBAF Tetrabutylammonium fluoride 氟化四丁基铵TASF Tris(diethylamino)sulfonium difluorotrimethyl silicateNi(R) Raney Nickel 雷尼镍(氢活性催化还原剂)NMO N-methyl morpholine-n-oxide N-甲基氧化吗啉TBHP t-butylhydroperoxide 过氧叔丁醇PCC Pyridinium chlorochromate 吡啶氯铬酸盐PDC Pyridinium dichromate 是什么东西?t-Bu Tert-butyl 叔丁基TEBA Triethylbenzylammonium 三乙基苄基胺PEG Polyethylene glycol 聚乙二醇TEMPO Tetramethylpiperdinyloxy free radicalPh Phenyl 苯基PhH Benzene 苯TFA Trifluoroacetic acid 三氟乙酸TFAA Trifluoroacetic anhydride 三氟乙酸酐PhMe Toluene 甲苯(亦称toluol;methylbenzene)Tol Tolyl 甲苯基Tf or OTf TriflatePhth Phthaloyl 邻苯二甲酰3楼THF Tetrahydrofuran 四氢呋喃Pip Piperidyl 哌啶基THP Tetrahydropyranyl 四氢吡喃基TMEDA Tetramethylethylenediamine 四甲基乙二胺Py Pyridine 吡啶TMP 2,2,6,6-tetramethylpiperidine 2,2,6,6-四甲基哌啶quant. quantitative yield 定量产率(对否?)TMS Trimethylsilyl 三甲基硅烷基Red-Al [(MeOCH2CH2O)AlH2]Na 直接看分子式就是了sBu sec-butyl 仲丁基Tr Trityl 三苯基sBuLi sec-butyllithium 仲丁基锂TRIS TriisopropylphenylsulfonylSiamyl DiisoamylTs (Tos) Tosyl (p-toluenesulfonyl) 对甲苯磺酰基谢谢观星人,我们合贴吧……(所有的都翻译了)%%de 非对映体过量百分比(不对称合成术语)%ee 对映体过量百分比(不对称合成术语)AA/MMA 丙烯腈/甲基丙烯酸甲酯共聚物AA 丙烯酸AAS 丙烯酸酯-丙烯酸酯-苯乙烯共聚物ABFN 偶氮(二)甲酰胺ABN 偶氮(二)异丁腈ABPS 壬基苯氧基丙烷磺酸钠Ac 乙酰基acac 乙酰丙酮基AIBN 2,2'-二偶氮异丁腈aq. 水溶液BBAA 正丁醛苯胺缩合物BAC 碱式氯化铝BACN 新型阻燃剂BAD 双水杨酸双酚A酯BAL 2,3-巯(基)丙醇9-BBN 9-硼二环[3.3.1]壬烷BBP 邻苯二甲酸丁苄酯BBS N-叔丁基-乙-苯并噻唑次磺酰胺BC 叶酸BCD β-环糊精BCG 苯顺二醇BCNU 氯化亚硝脲BD 丁二烯BE 丙烯酸乳胶外墙涂料BEE 苯偶姻乙醚BFRM 硼纤维增强塑料BG 丁二醇BGE 反应性稀释剂BHA 特丁基-4羟基茴香醚BHT 二丁基羟基甲苯BINAP (2R,3S)-2.2'-二苯膦-1.1'-联萘,亦简称为联二萘磷,BINAP是日本名古屋大学的Noyori(2 001年诺贝尔奖)发展的一类不对称合成催化剂BL 丁内酯BLE 丙酮-二苯胺高温缩合物BLP 粉末涂料流平剂BMA 甲基丙烯酸丁酯BMC 团状模塑料BMU 氨基树脂皮革鞣剂BN 氮化硼Bn 苄基BNE 新型环氧树脂BNS β-萘磺酸甲醛低缩合物BOA 己二酸辛苄酯BOC 叔丁氧羰基(常用于氨基酸氨基的保护)BOP 邻苯二甲酰丁辛酯BOPP 双轴向聚丙烯BP 苯甲醇BPA 双酚ABPBG 邻苯二甲酸丁(乙醇酸乙酯)酯BPF 双酚FBPMC 2-仲丁基苯基-N-甲基氨基酸酯BPO 过氧化苯甲酰BPP 过氧化特戊酸特丁酯BPPD 过氧化二碳酸二苯氧化酯BPS 4,4’-硫代双(6-特丁基-3-甲基苯酚)BPTP 聚对苯二甲酸丁二醇酯Bpy 2,2'-联吡啶BR 丁二烯橡胶BRN 青红光硫化黑BROC 二溴(代)甲酚环氧丙基醚BS 丁二烯-苯乙烯共聚物BS-1S 新型密封胶BSH 苯磺酰肼BSU N,N’-双(三甲基硅烷)脲BT 聚丁烯-1热塑性塑料BTA 苯并三唑BTX 苯-甲苯-二甲苯混合物Bu 正丁基BX 渗透剂BXA 己二酸二丁基二甘酯BZ 二正丁基二硫代氨基甲酸锌Bz 苯甲酰基Cc- 环-CA 醋酸纤维素CAB 醋酸-丁酸纤维素CAM 甲基碳酰胺CAN 硝酸铈铵CAN 醋酸-硝酸纤维素CAP 醋酸-丙酸纤维素Cat. 催化CBA 化学发泡剂CBz 苄氧羰基CDP 磷酸甲酚二苯酯CF 甲醛-甲酚树脂,碳纤维CFE 氯氟乙烯CFM 碳纤维密封填料CFRP 碳纤维增强塑料CLF 含氯纤维CMC 羧甲基纤维素CMCNa 羧甲基纤维素钠CMD 代尼尔纤维CMS 羧甲基淀粉COT 1,3,5-环辛四烯Cp 环戊二烯基CSA 樟脑磺酸CTAB 十六烷基三甲基溴化铵(相转移催化剂)Cy 环己基DDABCO 1,4-二氮杂双环[2.2.2]辛烷DAF 富马酸二烯丙酯DAIP 间苯二甲酸二烯丙酯DAM 马来酸二烯丙酯DAP 间苯二甲酸二烯丙酯DATBP 四溴邻苯二甲酸二烯丙酯DBA 己二酸二丁酯dba 苄叉丙酮DBE 1,2-?二溴乙烷DBEP 邻苯二甲酸二丁氧乙酯DBN 二环[5.4.0]-1,8-二氮-7-壬烯DBP 邻苯二甲酸二丁酯DBR 二苯甲酰间苯二酚DBS 癸二酸二癸酯DBU 二环[4.3.0]-1,5-二氮-5-十一烯DCC 1,3-二环己基碳化二亚胺DCCA 二氯异氰脲酸DCCK 二氯异氰脲酸钾DCCNa 二氯异氰脲酸钠DCE 1,2-二氯乙烷DCHP 邻苯二甲酸二环乙酯DCPD 过氧化二碳酸二环乙酯DDA 己二酸二癸酯DDP 邻苯二甲酸二癸酯DDQ 2,3-二氯-5,6-二氰-1,4-苯醌DEA 二乙胺DEAD 偶氮二甲酸二乙酯DEAE 二乙胺基乙基纤维素DEP 邻苯二甲酸二乙酯DETA 二乙撑三胺DFA 薄膜胶粘剂DHA 己二酸二己酯DHP 邻苯二甲酸二己酯DHS 癸二酸二己酯DIBA 己二酸二异丁酯Dibal-H 二异丁基氢化铝DIDA 己二酸二异癸酯DIDG 戊二酸二异癸酯DIDP 邻苯二甲酸二异癸酯DINA 己二酸二异壬酯DINP 邻苯二甲酸二异壬酯DINZ 壬二酸二异壬酯DIOA 己酸二异辛酯diphos(dppe) 1,2-双(二苯基膦)乙烷diphos-4(dppb) 1,2-双(二苯基膦)丁烷DMAP 4-二甲氨基吡啶DME 二甲醚DMF 二甲基甲酰胺dppf 双(二苯基膦基)二茂铁dppp 1,3-双(二苯基膦基)丙烷dvb 二乙烯苯Ee- 电解E/EA 乙烯/丙烯酸乙酯共聚物E/P 乙烯/丙烯共聚物E/P/D 乙烯/丙烯/二烯三元共聚物E/TEE 乙烯/四氟乙烯共聚物E/VAC 乙烯/醋酸乙烯酯共聚物E/VAL 乙烯/乙烯醇共聚物EAA 乙烯-丙烯酸共聚物EAK 乙基戊丙酮EBM 挤出吹塑模塑EC 乙基纤维素ECB 乙烯共聚物和沥青的共混物ECD 环氧氯丙烷橡胶ECTEE 聚(乙烯-三氟氯乙烯)ED-3 环氧酯EDA 乙二胺EDC 二氯乙烷EDTA 乙二胺四乙酸二钠EDTA 乙二胺四醋酸EE 乙氧基乙基EEA 乙烯-醋酸丙烯共聚物EG 乙二醇2-EH 异辛醇EO 环氧乙烷EOT 聚乙烯硫醚EP 环氧树脂EPI 环氧氯丙烷EPM 乙烯-丙烯共聚物EPOR 三元乙丙橡胶EPR 乙丙橡胶EPS 可发性聚苯乙烯EPSAN 乙烯-丙烯-苯乙烯-丙烯腈共聚物EPT 乙烯丙烯三元共聚物EPVC 乳液法聚氯乙烯Et 乙基EU 聚醚型聚氨酯EVA 乙烯-醋酸乙烯共聚物EVE 乙烯基乙基醚EXP 醋酸乙烯-乙烯-丙烯酸酯三元共聚乳液FF/VAL 乙烯/乙烯醇共聚物F-23 四氟乙烯-偏氯乙烯共聚物F-30 三氟氯乙烯-乙烯共聚物F-40 四氟氯乙烯-乙烯共聚物FDY 丙纶全牵伸丝FEP 全氟(乙烯-丙烯)共聚物FMN 黄素单核苷酸FNG 耐水硅胶Fp 闪点或茂基二羰基铁FPM 氟橡胶FRA 纤维增强丙烯酸酯FRC 阻燃粘胶纤维FRP 纤维增强塑料FRPA-101 玻璃纤维增强聚癸二酸癸胺(玻璃纤维增强尼龙1010树脂)FRPA-610 玻璃纤维增强聚癸二酰乙二胺(玻璃纤维增强尼龙610树脂)FVP 闪式真实热解法FWA 荧光增白剂精品文档GGF 玻璃纤维GFRP 玻璃纤维增强塑料GFRTP 玻璃纤维增强热塑性塑料促进剂GOF 石英光纤GPS 通用聚苯乙烯GR-1 异丁橡胶GR-N 丁腈橡胶GR-S 丁苯橡胶GRTP 玻璃纤维增强热塑性塑料GUV 紫外光固化硅橡胶涂料GX 邻二甲苯GY 厌氧胶Hh 小时H 乌洛托品1,5-HD 1,5-己二烯HDI 六甲撑二异氰酸酯HDPE 低压聚乙烯(高密度)HEDP 1-羟基乙叉-1,1-二膦酸HFP 六氟丙烯HIPS 高抗冲聚苯乙烯HLA 天然聚合物透明质胶HLD 树脂性氯丁胶HM 高甲氧基果胶HMC 高强度模塑料5楼HMF 非干性密封胶HMPA 六甲基磷酸三胺HMPT 六甲基磷酰胺HOPP 均聚聚丙烯HPC 羟丙基纤维素HPMC 羟丙基甲基纤维素HPMCP 羟丙基甲基纤维素邻苯二甲酸酯HPT 六甲基磷酸三酰胺HS 六苯乙烯HTPS 高冲击聚苯乙烯hv 光照IIEN 互贯网络弹性体IHPN 互贯网络均聚物IIR 异丁烯-异戊二烯橡胶IO 离子聚合物IPA 异丙醇IPN 互贯网络聚合物iPr 异丙基IR 异戊二烯橡胶IVE 异丁基乙烯基醚JJSF 聚乙烯醇缩醛胶JZ 塑胶粘合剂KKSG 空分硅胶LLAH 氢化铝锂(LiAlH4)LAS 十二烷基苯磺酸钠LCM 液态固化剂LDA 二异丙基氨基锂(有机中最重要一种大体积强碱)LDJ 低毒胶粘剂LDN 氯丁胶粘剂LDPE 高压聚乙烯(低密度)LDR 氯丁橡胶LF 脲LGP 液化石油气LHMDS 六甲基叠氮乙硅锂LHPC 低替代度羟丙基纤维素LIM 液体侵渍模塑LIPN 乳胶互贯网络聚合物LJ 接体型氯丁橡胶LLDPE 线性低密度聚乙烯LM 低甲氧基果胶LMG 液态甲烷气LMWPE 低分子量聚乙稀LN 液态氮LRM 液态反应模塑LRMR 增强液体反应模塑LSR 羧基氯丁乳胶LTBA 氢化三叔丁氧基铝锂MMA 丙烯酸甲酯MAA 甲基丙烯酸MABS 甲基丙烯酸甲酯-丙烯腈-丁二烯-苯乙烯共聚物MAL 甲基丙烯醛MBS 甲基丙烯酸甲酯-丁二烯-苯乙烯共聚物MBTE 甲基叔丁基醚MC 甲基纤维素MCA 三聚氰胺氰脲酸盐MCPA-6 改性聚己内酰胺(铸型尼龙6)mCPBA 间氯过苯酸MCR 改性氯丁冷粘鞋用胶MDI 二苯甲烷二异氰酸酯(甲撑二苯基二异氰酸酯)MDI 3,3’-二甲基-4,4’-二氨基二苯甲烷MDPE 中压聚乙烯(高密度)Me 甲基Me MethylMEK 丁酮(甲乙酮)MEKP 过氧化甲乙酮MEM 甲氧基乙氧基甲基-MES 脂肪酸甲酯磺酸盐Mes 均三甲苯基(也就是1,3,5-三甲基苯基)MF 三聚氰胺-甲醛树脂M-HIPS 改性高冲聚苯乙烯MIBK 甲基异丁基酮Min 分钟MMA 甲基丙烯酸甲酯MMF 甲基甲酰胺MNA 甲基丙烯腈MOM 甲氧甲基MPEG 乙醇酸乙酯MPF 三聚氨胺-酚醛树脂MPK 甲基丙基甲酮M-PP 改性聚丙烯MPPO 改性聚苯醚MPS 改性聚苯乙烯Ms 甲基磺酰基(保护羟基用)MS 分子筛MS 苯乙烯-甲基丙烯酸甲酯树脂MSO 石油醚MTBE 甲基叔丁基醚MTM 甲硫基甲基MTT 氯丁胶新型交联剂MWR 旋转模塑MXD-10/6 醇溶三元共聚尼龙MXDP 间苯二甲基二胺NNaphth 萘基NBD 二环庚二烯(别名:降冰片二烯)NBR 丁腈橡胶NBS N-溴代丁二酰亚胺?别名:N-溴代琥珀酰亚胺NCS N-氯代丁二酰亚胺.?别名:N-氯代琥珀酰亚胺NDI 二异氰酸萘酯NDOP 邻苯二甲酸正癸辛酯NHDP 邻苯二甲酸己正癸酯NHTM 偏苯三酸正己酯Ni(R) 雷尼镍(氢活性催化还原剂)NINS 癸二酸二异辛酯NLS 正硬脂酸铅NMO N-甲基氧化吗啉NMP N-甲基吡咯烷酮NODA 己二酸正辛正癸酯NODP 邻苯二甲酸正辛正癸酯NPE 壬基酚聚氧乙烯醚NR 天然橡胶OOBP 邻苯二甲酸辛苄酯ODA 己二酸异辛癸酯ODPP 磷酸辛二苯酯OIDD 邻苯二甲酸正辛异癸酯精品文档OPP 定向聚丙烯(薄膜)OPS 定向聚苯乙烯(薄膜)OPVC 正向聚氯乙烯OT 气熔胶PPA 聚酰胺(尼龙)PA-1010 聚癸二酸癸二胺(尼龙1010)PA-11 聚十一酰胺(尼龙11)PA-12 聚十二酰胺(尼龙12)PA-6 聚己内酰胺(尼龙6)PA-610 聚癸二酰乙二胺(尼龙610)PA-612 聚十二烷二酰乙二胺(尼龙612)PA-66 聚己二酸己二胺(尼龙66)PA-8 聚辛酰胺(尼龙8)PA-9 聚9-氨基壬酸(尼龙9)PAA 聚丙烯酸PAAS 水质稳定剂PABM 聚氨基双马来酰亚胺PAC 聚氯化铝PAEK 聚芳基醚酮PAI 聚酰胺-酰亚胺6楼PAM 聚丙烯酰胺PAMBA 抗血纤溶芳酸PAMS 聚α-甲基苯乙烯PAN 聚丙烯腈PAP 对氨基苯酚PAPA 聚壬二酐PAPI 多亚甲基多苯基异氰酸酯PAR 聚芳酯(双酚A型)PAR 聚芳酰胺PAS 聚芳砜(聚芳基硫醚)PB 聚丁二烯-〔1,3]PBAN 聚(丁二烯-丙烯腈)PBI 聚苯并咪唑PBMA 聚甲基丙烯酸正丁酯PBN 聚萘二酸丁醇酯PBS 聚(丁二烯-苯乙烯)PBT 聚对苯二甲酸丁二酯PC 聚碳酸酯PC/ABS 聚碳酸酯/ABS树脂共混合金PC/PBT 聚碳酸酯/聚对苯二甲酸丁二醇酯弹性体共混合金PCC 吡啶氯铬酸盐PCD 聚羰二酰亚胺PCDT 聚(1,4-环己烯二亚甲基对苯二甲酸酯)PCE 四氯乙烯PCMX 对氯间二甲酚PCT 聚己内酰胺PCT 聚对苯二甲酸环己烷对二甲醇酯PCTEE 聚三氟氯乙烯PD 二羟基聚醚PDAIP 聚间苯二甲酸二烯丙酯PDAP 聚对苯二甲酸二烯丙酯PDC 重铬酸吡啶PDMS 聚二甲基硅氧烷PEG 聚乙二醇Ph 苯基PhH 苯PhMe 甲苯Phth 邻苯二甲酰Pip 哌啶基Pr n-丙基Py 吡啶Qquant. 定量产率RRE 橡胶粘合剂Red-Al [(MeOCH2CH2O)AlH2]NaRF 间苯二酚-甲醛树脂RFL 间苯二酚-甲醛乳胶RP 增强塑料RP/C 增强复合材料RX 橡胶软化剂SS/MS 苯乙烯-α-甲基苯乙烯共聚物SAN 苯乙烯-丙烯腈共聚物SAS 仲烷基磺酸钠SB 苯乙烯-丁二烯共聚物SBR 丁苯橡胶SBS 苯乙烯-丁二烯-苯乙烯嵌段共聚物sBu 仲丁基sBuLi 仲丁基锂SC 硅橡胶气调织物膜SDDC N,N-二甲基硫代氨基甲酸钠SE 磺乙基纤维素SGA 丙烯酸酯胶SI 聚硅氧烷Siamyl 二异戊基SIS 苯乙烯-异戊二烯-苯乙烯嵌段共聚物SIS/SEBS 苯乙烯-乙烯-丁二烯-苯乙烯共聚物SM 苯乙烯SMA 苯乙烯-顺丁烯二酸酐共聚物SPP 间规聚苯乙烯SPVC 悬浮法聚氯乙烯SR 合成橡胶ST 矿物纤维TTAC 三聚氰酸三烯丙酯TAME 甲基叔戊基醚TAP 磷酸三烯丙酯TASF 三(二乙胺基)二氟三甲基锍硅酸盐TBAF 氟化四丁基铵TBDMS,?TBS 叔丁基二甲基硅烷基(羟基保护基)TBE 四溴乙烷TBHP 过氧叔丁醇TBP 磷酸三丁酯t-Bu 叔丁基TCA 三醋酸纤维素TCCA 三氯异氰脲酸TCF 磷酸三甲酚酯TCPP 磷酸三氯丙酯TDI 甲苯二异氰酸酯TEA 三乙胺TEAE 三乙氨基乙基纤维素TEBA 三乙基苄基胺TEDA 三乙二胺TEFC 三氟氯乙烯TEMPO 四甲基氧代胡椒联苯自由基TEP 磷酸三乙酯Tf?or?OTf 三氟甲磺酸TFA 三氟乙酸TFAA 三氟乙酸酐TFE 四氟乙烯THF 四氢呋喃THF 四氢呋喃THP 四氢吡喃基TLCP 热散液晶聚酯TMEDA 四甲基乙二胺TMP 三羟甲基丙烷TMP 2,2,6,6-四甲基哌啶TMPD 三甲基戊二醇TMS 三甲基硅烷基TMTD 二硫化四甲基秋兰姆(硫化促进剂TT)TNP 三壬基苯基亚磷酸酯Tol 甲苯基TPA 对苯二甲酸TPE 磷酸三苯酯TPS 韧性聚苯乙烯TPU 热塑性聚氨酯树脂Tr 三苯基TR 聚硫橡胶TRIS 三异丙基乙磺酰TRPP 纤维增强聚丙烯TR-RFT 纤维增强聚对苯二甲酸丁二醇酯TRTP 纤维增强热塑性塑料Ts?(Tos) 对甲苯磺酰基UU 脲UF 脲甲醛树脂UHMWPE 超高分子量聚乙烯UP 不饱和聚酯VVAC 醋酸乙烯酯VAE 乙烯-醋酸乙烯共聚物VAM 醋酸乙烯VAMA 醋酸乙烯-顺丁烯二酐共聚物VC 氯乙烯VC/CDC 氯乙烯/偏二氯乙烯共聚物VC/E 氯乙烯/乙烯共聚物VC/E/MA 氯乙烯/乙烯/丙烯酸甲酯共聚物VC/E/VAC 氯乙烯/乙烯/醋酸乙烯酯共聚物VC/MA 氯乙烯/丙烯酸甲酯共聚物VC/MMA 氯乙烯/甲基丙烯酸甲酯共聚物VC/OA 氯乙烯/丙烯酸辛酯共聚物VC/VAC 氯乙烯/醋酸乙烯酯共聚物VCM 氯乙烯(单体)VCP 氯乙烯-丙烯共聚物VCS 丙烯腈-氯化聚乙烯-苯乙烯共聚物VDC 偏二氯乙烯VPC 硫化聚乙烯VTPS 特种橡胶偶联剂WWF 新型橡塑填料WP 织物涂层胶WRS 聚苯乙烯球形细粒XXF 二甲苯-甲醛树脂XMC 复合材料YYH 改性氯丁胶YM 聚丙烯酸酯压敏胶乳YWG 液相色谱无定型微粒硅胶ZZE 玉米纤维ZH 溶剂型氯化天然橡胶胶粘剂ZN 粉状脲醛树脂胶。

盐酸多巴酚丁胺-安全技术说明书MSDS

盐酸多巴酚丁胺-安全技术说明书MSDS

第一部分化学品及企业标识化学品中文名:盐酸多巴酚丁胺化学品英文名:4-[2-[[3-(p-hydroxyphenyl)-1-methylpropyl]amino]ethyl]pyrocatechol hydrochloride CAS No.:49745-95-1分子式:C18H24ClNO3产品推荐及限制用途:工业及科研用途。

第二部分危险性概述紧急情况概述吞咽有害。

皮肤接触有害。

吸入有害。

怀疑对生育能力或胎儿造成伤害。

GHS危险性类别急性经口毒性类别 4急性经皮肤毒性类别 4急性吸入毒性类别 4生殖毒性类别 2标签要素:象形图:警示词:警告危险性说明:H302 吞咽有害H312 皮肤接触有害H332 吸入有害H361 怀疑对生育能力或胎儿造成伤害●预防措施:—— P264 作业后彻底清洗。

—— P270 使用本产品时不要进食、饮水或吸烟。

—— P280 戴防护手套/穿防护服/戴防护眼罩/戴防护面具。

—— P261 避免吸入粉尘/烟/气体/烟雾/蒸气/喷雾。

—— P271 只能在室外或通风良好处使用。

—— P201 使用前取得专用说明。

—— P202 在阅读并明了所有安全措施前切勿搬动。

●事故响应:—— P301+P312 如误吞咽:如感觉不适,呼叫解毒中心/ 医生—— P330 漱口。

—— P302+P352 如皮肤沾染:用水充分清洗。

—— P312 如感觉不适,呼叫解毒中心/医生—— P362+P364 脱掉沾染的衣服,清洗后方可重新使用—— P304+P340 如误吸入:将人转移到空气新鲜处,保持呼吸舒适体位。

—— P308+P313 如接触到或有疑虑:求医/就诊。

●安全储存:—— P403+P233 存放在通风良好的地方。

保持容器密闭。

—— P405 存放处须加锁。

●废弃处置:—— P501 按当地法规处置内装物/容器。

物理和化学危险:无资料。

健康危害:吞咽有害。

皮肤接触有害。

吸入有害。

哈姆尔曼高压注射泵商品介绍说明书

哈姆尔曼高压注射泵商品介绍说明书

Injection pumpsMethanolLDHIGlycolwww.process-pumps.deHammelmann offer a wide rangeof high pressure pumps for thechemical, oil and gas industries.Visit our website.Asphaltene InhibitorParaffin InhibitorCorrosion InhibitorScale Inhibitor INNOVATION THROUGH EXPERIENCEHammelmann Injection PumpsCalder offer a wide range of highpressure pump packages incorporatingHammelmann pumps for the chemical,oil and gas industries.Visit our website.www.process-pumps.deLabyrinth sealThis seal design which is absolutely unique to Hammelmann enables safe, reliable, continuous duty operation at pressures up to 3800 bar.The high pressure seal is formed within the minute cylindrical gap between the plunger and the labyrinth insert. The medium pressure is continuously reduced along the sealing surface.A minimum amount of high pressure leakage serving as lubricant is returned to the pump suction chamber.Exclusive sealing systemThe plunger connection to thepower end is self centering thereby drastically reducing sideways forces. This design ensures that there is virtually no contact between the plunger and the labyrinth insert resulting in extremely low component wear.When the pump unit is shut down the medium remains in thecylindrical gap so that a re-start,even after an extended shut down period is assured.Wear at the high pressure seal components does not lead to an abrupt breakdown of the pump but rather a gradual decrease in the flow rate. If the pump is driven in a control loop the r.p.m. of the driver will increase in direct proportion to component wear.S p e e dThe running speed of the pump is a direct indicator of the extent of wear.This enables long term planning of maintenance intervals and targeting ofspecific servicing tasks.We manufacture extremely compact Triplex and Quintuplex pump units for injection of Methanol, LDHI,Glycol and a range of inhibitors.Hammelmann high pressure pump units in the pressure range up to 15,000 psi (1035 bar) havedeveloped into the standard choice for offshore methanol injection applications with a reputation for extreme reliability and minimal maintenance requirements.Compact constructionExtensiveperformancerangeWith both Triplex andQuintuplex pumpsavailable we cansupply a veryextensive range offlow rates andoperating pressures.Power ratingsup to 1000 HPup to 750 kWFlow ratesup to 530 gpmup to 2000 l/minOperating pressuresup to 55,000 psiup to 3800 barHammelmann pumps producemaximum performance from aminimal footprint which is the resultof combining a compact integralspeed reduction gear end with theconcept of a vertical configuration.The vertical configuration channelsoscillating forces directlydownwards into the base structure.Unwanted lateral oscillations asproduced by horizontal pumps donot occur.The integral speed reducer with twinhelical gears arranged in a herringbone configuration ensures smoothrunning and even powertransmission without axially loadingthe bearings.A selection of gear ratios isavailable to allow the optimal choiceof driver. The compact constructioneliminates the need for an externalgear box and prevents rotaryoscillation. Mechanical efficiency isin excess of 95%.Industrial pumps, series 2ValvesThe suction valve (below) is a discring design incorporating a onepiece suction and discharge valveseat.FeaturesSeries 2 pumps employ the sameprecision engineered, field provencomponents as Hammelmannstandard production pumps. Theyare extremely compact with lowmaintenance costs and highoperational efficiency.Plunger speedUnitsOur high pressure pump units canbe supplied with electric motor, achoice of controls, safety valves andsuction side/discharge sidepulsation dampers.HDP 752HDP 482HDP 362HDP 252HDP172HDP 122HDP 72HDP 42HDP 2200,20,40,60,81,01,21,4Plunger speed m/sec1,61,8Moderate plunger speeds result inlow plunger and sealing elementwear characteristics.OUTINSealmonitoringsystemSeal monitoringThe condition of the low pressureseals may be monitored by installingan optional sealmonitoring system.MaintenancePump maintenance is carried outfrom above. Once the pump head isremoved you have complete,uncomplicated access to all highpressure components.Pump headThe total pressurised fluid productof the individual cylinders collectswithin a single high pressuredischarge bore within the pumphead valve block. The coaxial valvearrangement eliminates alternatingstress within the valve block.Suction chamberThe process fluid enters the pumpvia the suction chamber. Thistotally encloses the high pressurecomponents in a protective barrierand prevents emission of mediumto atmosphere.5,000 psi345 bar 10,000 psi 690 bar 15,000 psi 1035 bar Crankspeed HDP 22 D 20 D 15 D 12750 rpm 5 gpm 19l/min 2.6 gpm 10 l/min 1.6 gpm 6 l/min HDP 42 D 35 D 26 D 20750 rpm 15 gpm 60 l/min 8 gpm 31 l/min 4.7 gpm18 l/min HDP 72D 35 D 26 D 22750 rpm 21 gpm 80 l/min 11 gpm 42 l/min 7.4 gpm 28 l/min HDP 122 D 55 D 35 D 30530 rpm 50 gpm 192 l/min 19 gpm 74 l/min 13 gpm 51 l/min HDP 172 D 50 D 35 D 30555 rpm 61 gpm 232 l/min 28 gpm 108 l/min 20 gpm 75 l/min HDP 252 D 50 D 35 D 30555 rpm 102 gpm 387 l/min 47 gpm 181 l/min 32 gpm 124 l/min HDP 362 D 80 D 60 D 45490 pm 138 gpm 525 l/min 74 gpm 282 l/min 38 gpm 146 l/min HDP 482 D 80D 60 D 45465 rpm 171 gpm650 l/min92 gpm 349 l/min 47 gpm 181 l/min HDP 752D 80D 60D 45465 rpm285 gpm 1080 l/min159 gpm603 l/min79 gpm302 l/minPerformance data, Industrial pumps, series 2(Selection)Pos.Part name Pos.Part name 1Discharge valve 8Low pressure seal pack 2Valve housing 9Bellow 3Suction valve 10Crosshead4Suction chamber 11Connection rod 5Sleeve 12GearHDP 22/42: belt drive 6Labyrinth insert 13Crank shaft7Plunger14Crank section housing1234567891011121314Recommendations and standardsEU Machine directive 98/37/ EU ATEX 94/9/EUAPI 674 (with exceptions)Technical data, Industrial pumps, series 2Standard Option PlungerLabyrinth insert Ceramic Bronze-Valve housing 17% Chromium steel22% Duplex steelSealsNBR / PolyamideFKM / PEEK Suction chamberBronze18 – 10Chromium Nickel steel* Right reserved to make technical modificationsWetted parts materials *Gas tight designThe intermediate chamber of the pump can be outfitted with gas tight covers which provide a seal to atmosphere. The chamber is then charged with inert gas.This design ensures that no fluids, vapours or gases can escape to atmosphere via a worn plunger seal.1 = Priming valve2 =Safety valve3=Pressure regulating valveBellows systemThe bellows are the hermetic seals for the power end to prevent the intrusion of fluid or gas. They are available in FKM, H-NBR and PTFE.Process pumps, series 5ValvesTo ensure that the pumpconstructíon is appropiate for the pumped medium we have a number of alternative valve designsavailable. In the example shown below the suction and discharge valves are conical. The suction and discharge valve seats are combined in one component.FeaturesSeries 5 pumps are built to the highest standards of safety and reliability. We can supplycomponents from a wide range of materials to suit the pumped medium.Our latest variation of this pump series is the Zero emission where the pumped fluid is hermetically sealed within the pump, preventing leakage to atmosphere during operation.Plunger speedUnitsYour complete pump unit can be outfitted with suction and/or discharge pulsation dampersdimensioned, manufactured, tested and certified to your specification.1,4HDP 755HDP 485HDP 365HDP 255HDP 175HDP 125HDP 75HDP 45HDP 2500,20,40,60,81,01,2Plunger speed m/secInert gasOUTINThe series 5 pumps areconservatively rated for power with low plunger speeds ensuring limited wear of plungers and sealing elements.32Seal monitoring 11Performance data, Process pumps, series 5 (Selection)5,000 psi345 bar 10,000 psi 690 bar 15,000 psi 1035 bar Crank speed HDP 25 D 20 D 15 D 12420 rpm 2.9 gpm 11 l/min 1.5 gpm 6 l/min 0.9 gpm 3,5 l/min HDP 45 D 35 D 26 D 20500 rpm 10 gpm 40 l/min 5 gpm 20 l/min 3 gpm 12 l/min HDP 75 D 35 D 26 D 22490 rpm 13 gpm 52 l/min 7 gpm 28 l/min 5 gpm 19 l/min HDP 125 D 55 D 35 D 30365 rpm 35 gpm 133 l/min 13 gpm 51 l/min 9 gpm 35 l/min HDP 175 D 50 D 35 D 30385 rpm 42 gpm 160 l/min 19 gpm 74 l/min 13 gpm 52 l/min HDP 255 D 50 D 35 D 30390 rpm 71 gpm 270 l/min 33 gpm 126 l/min 23 gpm 87 l/min HDP 365 D 80 D 60 D 45340 rpm 95 gpm 363 l/min 51 gpm 194 l/min 26 gpm 101 l/min HDP 485 D 80 D 60 D 45365 rpm 137 gpm 520 l/min 73 gpm 279 l/min 38 gpm 145 l/min HDP 755D 80D 60D 45365 pm229 gpm867 l/min127 gpm483 l/min63 gpm242 l/minD = Piston dia [mm]1234567891011121314Technical data, Process pumps, series 5Wetted parts materials *Recommendations and standardsEU Machine directive 98/37/ EUATEX 94/9/EUAPI 674 (with exceptions)Other customer specified standards, i.e.NORSK M501NORSOK M650NACE MR 0175Pos.Part name Pos.Part name 1Discharge valve 8Low pressure seal pack 2Valve housing 9Bellows 3Suction valve 10Crosshead4Suction chamber 11Connection rod 5Sleeve 12GearHDP 25/45: belt drive 6Labyrinth insert 13Crank shaft7Plunger14Crank section housingStandardOptionPlungerLabyrinth insert Ceramic BronzeTungsten carbide Tungsten carbide Valve housing 22% Duplex steel25% Super duplex steel SealsNBR / PolyamideFFKM / PEEKSuction chamber 18–10 Chromium Nickel steel 25% Superduplex steel * Right reserved to make technical modificationsRound the clock operationThe compact design ofHammelmann pumps is a space saving advantage for installation on offshore platforms and FPSO’s.They are increasingly specified as the pumps of choice for offshore installations.02/09© Copyright Hammelmann Maschinenfabrik GmbH, Oelde, Germany. Right reserved to make technical modificationsAgbami Aker 1-6Allegheny Anna Platform Atlantis Auger Auger Apit Baton Rouge Black Widow BrazilBrutus/Glider BS4Cabida Block Canyon Express Conger Salsa Demos ForvieGarden Banks Garnet Gjoa Semi Groupo R Hickory HolsteinHorn Mountain HoumaIndep. Hub 3IndpendenceK2 Green Canyon K-FelsKikeh-Gusto King Kong Kings PeekKristin Longhorn Mad Dog Magnolia Marco Polo Max-Stena-Drill Mobile Rig Morvin Asgard Neptune Nile NoonanNorse Marchand Panama City Pegasus Perdido Petrorig Producer Scarebo Schahin SevanS. Timbalier Statfjord B & C Tahiti Talisman Tanzanite Tarantula TMT 1TyphonUrsa-Princess Valifornia West EdrillHDP 72 unit for methanol duty Op. pressure 12,000 psi – 830 bar Flow rate 6 gpm – 24 l/minHDP 555 pump unit for glycol and methanol dutyOp.pressure 10,700 psi – 740 bar, Flow rate 87 gpm – 333 l/minHDP 115 units for methanol duty Op. pressure 15,000 psi – 1035 bar Flow rate 1.5 gpm – 6 l/minHDP 122 unit for LDHI dutyOp. pressure 15,000 psi – 1035 bar Flow rate 7 gpm – 28 l/minHDP 175 units for methanol duty Op. pressure 5,300 psi – 370 bar Flow rate 46 gpm – 176 l/minHammelmannMaschinenfabrik GmbH Zum Sundern 13-2159302 Oelde – Germany Tel. +45 2522 760Fax +49 2522 76444******************www.hammelmann.deCalder Ltd.Gregory's Bank Worcester WR3 8ABUnited Kingdom Phone: 0044 1905 723 255Fax: 0044 1905 723 904***************.uk Calder Ltd.Gregory’s Bank Worcester WR3 8AB United KingdomPhone: 0044 1905 723 255Fax: 0044 1905 723 904***************.uk The compact design of Calder pump packages incorporatingHammelmann pumps, offers a space saving advantage for installation on offshore platforms and FPSO’s. They are increasingly specified as the pumps of choice for offshore installations.。

tricine胶

tricine胶

对于小分子量的蛋白:可以考虑一下Tricine-SDS-PAGE,即用三羟甲基甘氨酸(tricine)代替甘氨酸作为终止离子。

Tricine-SDS-PAGE可以有效地分离1-100 kDa的蛋白样品:下面推荐两个Tricine-SDS-PAGE电泳的protocol,供参考。

推荐I首先是Nature Protocol上的一篇专门介绍Tricine-SDS-PAGE的文章,作者是该领域的专家——Schǎgger。

Nature Protocols 1, - 16 - 22 (2006)Published online: 12 May 2006 | Corrected online: 10 August 20 06 | doi:10.1038/nprot.2006.4Tricine-SDS-PAGE要与小蛋白打很多交道的同志们可以仔细研读一下这篇文章,总结整理出适合你的具体方案。

推荐II只是想看看Tricine胶的分离效果,偶尔一试,可以参考下面这个具体的protocol。

Tricine胶的配方阴极、阳极缓冲液的配方介绍:常规的Tris-SDS-PAGE电泳的只能分辨大分子物质的,而对了相对分子量小的,尤其是10kD以下的蛋白分辨率极低。

本人用Tris-SDS-PAGE做一个20KD以下的蛋白结果不是很理想,而且重现性差,因为在这种不连续的缓冲系统中,低分子量的常常堆积在浓缩胶中。

而Tricine-SDS-PAGE 可以很好的分离30KD以下的蛋白,而且本人还发现它同样对大蛋白也适用,我用它做过45KD,90KD,120KD左右的蛋白,而且每次上样3uL的Marker跑出来的10条带清清楚楚,几乎是平行的跑下来,常规的Tris-SDS-PAGE加了10uL的效果也没它好,有时越大下面越不清楚,也越窄。

如果,有战友做小蛋白的话不妨试试看,下面是实验配方和步骤。

一、缓冲液的配置:1.正极缓冲液anode buffer(2X):0.1M Tris(pH 8.9):12.114g加H20定容至500ml, 4℃保存。

Itopride hydrochloride_AChE抑制剂_122892-31-3_Apexbio

Itopride hydrochloride_AChE抑制剂_122892-31-3_Apexbio
Evaluation sample solution : ship with blue ice All other available size: ship with RT , or blue ice upon request
ห้องสมุดไป่ตู้生物活性
靶点 :
Neuroscience
信号通路:
AChE
产品描述:
IC50 为 2.04 μM。 Itopride 是一种乙酰胆碱酯酶(AchE)抑制剂。 在中枢和外周神经系统中的多种胆碱能途径中,乙酰胆碱酯酶通过快速水解神经递质乙酰胆
碱,在终止脉冲传递中起关键作用。
体外:研究发现 Itopride 抑制 AChE 和马血清丁酰胆碱酯酶(BuChE)。然而,抑制 AChE 的 IC50 比抑制 BuChE 的 IC50 小 100 倍。受低剂量 neostigmine 抑制的 AChE 活性的恢复是部分的, 但是受 Itoprid 抑制的 AChE 活性的恢复是完全的。双互换图显示 Vmax 和 Km 都受到 itopride 的影响,表明抑制为“混合”型,尽管抑制主要是无竞争性的。此外,itopride 对豚鼠胃肠 道胆碱酯酶(ChE)活性的抑制作用比对纯 AChE 的抑制作用弱很多[1]。 体内:先前动物研究表明,在植入应变计力传感器的清醒犬中,itopride 可刺激从胃到结肠 胃肠道的收缩活性。而 mosapride 仅能在胃窦和回肠中刺激收缩活性。此外,在大鼠和豚鼠 中,itopride 可加速结肠腔内转运,然而,mosapride 和 cisapride 均未能增强结肠运输。这 些发现表明,itopride 对促进结肠腔内容物、结肠蠕动具有刺激作用,这与 mosapride 和 cisapride 完全不同[2]。 临床试验:在包括日本在内的几个国家,Itopride 盐酸盐已被临床用作胃动力学药物,用于 功能性消化不良症状的治疗[2]。

一种盐酸芬戈莫德的合成方法及其中间体

一种盐酸芬戈莫德的合成方法及其中间体

一种盐酸芬戈莫德的合成方法及其中间体盐酸芬戈莫德(hydrochloride fenclonine)是一种常用的神经调节剂,用于治疗抑郁症和精神病等疾病。

其合成方法一般涉及几个重要的中间体。

首先,盐酸芬戈莫德可以通过对双丙氨基甲苯(dipropyramine)的化学反应来合成。

这个过程包括如下几个步骤。

步骤一:双丙氨基甲苯首先通过酸催化剂在乙酸甲酯(acetic methyl ester)中饱和硝化,形成相应的硝基化合物。

此反应需要加入适量的浓硫酸和硝酸。

步骤二:接下来,硝基化合物通过氢氧化钠(sodium hydroxide)的作用,在醇溶剂中进行还原反应,得到相应的氨基化合物。

步骤三:经过还原反应得到氨基化合物后,通过对其进行氯化处理,生成氯莫衍生物。

此反应需要加入适量的氯化亚砜(thionyl chloride)和五氯硅烷(silicon tetrachloride)等试剂。

步骤四:氯莫衍生物通过将其与氨(ammonia)或二甲基胺(dimethylamine)反应,进行还原反应,得到芬戈基胺。

此反应需要在高压下进行,并在其中加入一定量的氢气气氛。

步骤五:最后,芬戈基胺与盐酸反应,生成最终的盐酸芬戈莫德。

以上所述的合成方法是盐酸芬戈莫德的一种较常用的合成方法。

虽然该方法中所使用的试剂较多,合成步骤较多,但是该方法具有可行性和高产率的特点。

此外,该方法还可以通过合理地选择和改进试剂和反应条件来改进产率和纯度。

盐酸芬戈莫德的中间体包括硝基化合物、氨基化合物、氯莫衍生物和芬戈基胺。

在合成过程中,这些中间体的选择和转化反应是非常关键的。

对这些中间体的制备和转化反应进行优化,可以有效提高盐酸芬戈莫德的产率和纯度。

总的来说,盐酸芬戈莫德是一种重要的神经调节剂,其合成方法包括多个步骤和中间体。

在合成过程中,对中间体的选择和反应条件的控制是非常重要的。

进一步的研究和改进可以提高盐酸芬戈莫德的合成效率和纯度,更好地满足临床需求。

蛋白质实验技术

蛋白质实验技术

一些重要化学试剂:
-SH基团封闭剂:
1. Iodoacetamide (IAM,碘乙酰胺) 2. Iodoacetamic acid (IAA)
细胞裂解液(Homogenizing buffer):
全细胞蛋白的分离提取液(mmol/L ):Tris-HCl
50, pH 7.5, NaCl 150, EDTA 5, EGTA 5, SDS 2%。
胞浆蛋白提取液(mmol/L): Tris-Cl 50,pH 7.5,
EGTA 2, EDTA 2, DTT 2, Na Pyrophosphate 5, KF 50, Okadaic acid 50M,5mg/L each of leupeptin, aprotintin, pepstatin A, chymostatin)。
The following cartoon shows a slab of polyacrylamide
(dark gray) with tunnels (different sized red rings with
shading to depict depth) exposed on the edge. Notice that there are many different sized of tunnels scattered randomly throughout the gel.
膜相关蛋白提取液(mmol/L):胞浆蛋白提取液+
0.5% NP-40。
细胞裂解液(Homogenizing buffer):
核蛋白的快速分离提取方法(Nancy 1991):
1. 缓冲液A(mmol/L): HEPES-KOH (pH7.9) 10,

盐酸吡哆醇分子量

盐酸吡哆醇分子量

盐酸吡哆醇分子量概述盐酸吡哆醇(Pyridoxine hydrochloride)是一种重要的维生素B6衍生物,化学名称为4,5-bis(hydroxymethyl)-2-methylpyridin-3-ol hydrochloride。

它在药物和医学领域具有广泛的应用,被广泛用于治疗B6维生素缺乏症和其他相关疾病。

了解盐酸吡哆醇的分子量对于药物研究和治疗非常重要。

盐酸吡哆醇的分子量盐酸吡哆醇的分子式为C8H12ClNO3,它包含了8个碳原子、12个氢原子、1个氯原子和3个氧原子。

根据元素的相对原子质量,我们可以计算出盐酸吡哆醇的分子量。

首先,我们需要查找各个原子的相对原子质量: - 碳(C)的相对原子质量为12.01 - 氢(H)的相对原子质量为1.008 - 氯(Cl)的相对原子质量为35.45 - 氧(O)的相对原子质量为16.00接下来,我们将各个原子的相对原子质量相加,并加上氯化氢(HCl)的相对原子质量(即氯的原子质量),即可计算出盐酸吡哆醇的分子量:分子量 = 8 *12.01 + 12 * 1.008 + 35.45 + 3 * 16.00 = 169.18 g/mol所以,盐酸吡哆醇的分子量为169.18 g/mol。

盐酸吡哆醇的应用盐酸吡哆醇在医学领域具有重要的应用价值。

它主要通过补充体内维生素B6来改善一系列相关疾病的症状。

1. 治疗维生素B6缺乏症维生素B6是一种重要的水溶性维生素,对身体各个系统的正常运转起着重要作用。

维生素B6缺乏可能导致贫血、皮肤炎症、神经系统障碍等症状。

盐酸吡哆醇可以作为补充维生素B6的药物,有效改善维生素B6缺乏引起的症状。

2. 预防和治疗妊娠反应妊娠反应是一种常见的孕期症状,包括恶心、呕吐等不适感。

盐酸吡哆醇可以帮助调节妊娠期的激素水平,减轻或预防妊娠反应的发生。

3. 支持正常神经系统发育和功能维生素B6在神经系统的发育和功能中扮演重要角色。

盐酸吡哆醇的补充可以促进神经系统的正常发育和功能,对于预防和治疗与神经系统相关的疾病具有积极作用。

艾贝宁说明书

艾贝宁说明书

艾贝宁说明书(总8页) -CAL-FENGHAI.-(YICAI)-Company One1-CAL-本页仅作为文档封面,使用请直接删除【药品名称】通用名称:盐酸右美托咪定注射液商品名称:艾贝宁英文名称:Dexmedetomidine Hydrochloride Injection汉语拼音:Yansuan Youmeituomiding Zhusheye【成份】本品主要成份为盐酸右美托咪定,其化学名为:(+)-4-(S)-[1-(2,3-二甲基苯基)乙基]-1H-咪唑盐酸盐。

分子式:C13H16N2·HCl分子量:236.7本品辅料为氯化钠。

【性状】本品为无色或几乎无色的澄明液体。

【适应症】用于行全身麻醉的手术患者气管插管和机械通气时的镇静。

【规格】2ml∶200mg(按右美托咪定计)【用法用量】成人剂量:配成4mg /ml浓度以1mg/kg剂量缓慢静注,输注时间超过10分钟。

本品在给药前必须用0.9%的氯化钠溶液稀释达浓度4mg /ml,可取出2mL本品加入48ml0.9%的氯化钠注射液中形成总的50ml溶液,轻轻摇动使均匀混合。

操作过程中必须始终维持严格的无菌技术。

一般地,静脉用药前应该肉眼检查药品有无颗粒物质和颜色是否改变。

剂量调整:由于可能的药效学相互作用,当本品与其他麻醉剂、镇静剂、安眠药或阿片类药物同时给药时可能需要减少给药剂量(见药物相互作用)。

肝、肾功能损伤的患者和老年患者可能需要考虑减少给药剂量。

药品相容性:因为物理相容性尚不确定,本品不应与血液或血浆通过同一静脉导管同时给予。

当本品与以下药物同时给予时显示不相容:两性霉素B,地西泮。

当本品与以下静脉液体和药物同时给予时已经显示了相容性:0.9%的氯化钠水溶液,5%的葡萄糖水溶液。

已经证实一些类型的天然橡胶可能吸收本品,建议使用合成的或有涂层的橡胶垫给药装置。

【不良反应】由于临床试验是在多种不同情况下进行的,因此一种药物在临床试验中观察到的不良反应发生率不能与另一种药物进行直接比较,而且可能无法反映实际临床应用中观察到的不良反应情况。

重组贻贝粘蛋白的表征及功效评价

重组贻贝粘蛋白的表征及功效评价

生物技术进展 2023 年 第 13 卷 第 4 期 596 ~ 603Current Biotechnology ISSN 2095‑2341研究论文Articles重组贻贝粘蛋白的表征及功效评价李敏 , 魏文培 , 乔莎 , 郝东 , 周浩 , 赵硕文 , 张立峰 , 侯增淼 *西安德诺海思医疗科技有限公司,西安 710000摘要:为了推进重组贻贝粘蛋白在医疗、化妆品领域的应用,对大肠杆菌规模化发酵及纯化生产获得的重组贻贝粘蛋白进行了表征及功效评价。

经Edman 降解法、基质辅助激光解吸电离飞行时间质谱、PITC 法、非还原型SDS -聚丙烯酰胺凝胶电泳法、凝胶法、改良的Arnow 法对重组贻贝粘蛋白进行氨基酸N 端测序、相对分子量分析、氨基酸组成分析、蛋白纯度分析、内毒素含量测定、多巴含量测定;通过细胞迁移、斑马鱼尾鳍修复效果对重组贻贝粘蛋白进行功效评价。

结果显示,获得的重组贻贝粘蛋白与理论的一级结构一致,蛋白纯度达95%以上,内毒素<10 EU ·mg -1,多巴含量大于5%;重组贻贝粘蛋白浓度为60 μg ·mL -1时能够显著促进细胞增殖的活性(P <0.01);斑马鱼尾鳍面积样品组与模型对照组相比极显著增加(P <0.001)。

研究结果表明,重组贻贝粘蛋白具有显著的促细胞迁移和修复愈合的功效,具备作为生物医学材料的潜质。

关键词:贻贝粘蛋白;基因重组;生物材料;表征;功效评价DOI :10.19586/j.2095­2341.2023.0021 中图分类号:S985.3+1 文献标志码:ACharacterization and Efficacy Evaluation of Recombinant Mussel Adhesive ProteinLI Min , WEI Wenpei , QIAO Sha , HAO Dong , ZHOU Hao , ZHAO Shuowen , ZHANG Lifeng ,HOU Zengmiao *Xi'an DeNovo Hith Medical Technology Co., Ltd , Xi'an 710000, ChinaAbstract :In order to promote the application of recombinant mussel adhesive protein in the medical and cosmetics field , the recombi⁃nant mussel adhesive protein obtained from scale fermentation and purification of Escherichia coli was characterized and its efficacy was evaluated. Amino acid N -terminal sequencing , relative molecular weight analysis , amino acid composition analysis , protein purityanalysis , endotoxin content , dihydroxyphenylalanine (DOPA ) content of recombinant mussel adhesive protein were determined by the following methods : Edman degradation , matrix -assisted laser desorption ionization time -of -flight mass spectrometry (MALDI -TOF -MS ), phenyl -isothiocyanate (PITC ), nonreductive SDS -polyacrylamide gel electrophoresis (SDS -PAGE ), gel method , modified Ar⁃now. The efficacy of recombinant mussel adhesive protein was evaluated by cell migration and repairing effect of zebrafish tail fin. Re⁃sults showed that the obtained recombinant mussel adhesive protein was confirmed to be consistent with the theoretical primary structure , protein purity of more than 95%, endotoxin <10 EU ·mg -1, DOPA content above 5%. When the recombinant mussel adhesive protein concentration was 60 μg ·mL -1, the effect of promoting cell proliferation was the most obvious , and it had very significant activity (P <0.01). The caudal fin area of zebrafish in sample group was significantly increased compared with model control group (P <0.001). The results indicated that recombinant mussel adhesive protein can promote cell migration and repair healing and has the potential to be used as biomedical materials.Key words :mussel adhesive protein ; gene recombination ; biological materials ; representation ; efficacy evaluation贻贝粘蛋白(mussel adhesive protein , MAP )也称作贻贝足丝蛋白(mussel foot protein ,Mfps ),收稿日期:2023⁃02⁃24; 接受日期:2023⁃03⁃31联系方式:李敏 E -mail:*******************;*通信作者 侯增淼 E -mail:***********************.cn李敏,等:重组贻贝粘蛋白的表征及功效评价是海洋贝类——紫贻贝(Mytilus galloprovincalis)、厚壳贻贝(Mytilus coruscus)、翡翠贻贝(Perna viri⁃dis)等分泌的一种特殊的蛋白质,贻贝中含有多种贻贝粘蛋白,包括贻贝粘蛋白(Mfp 1~6)、前胶原蛋白(precollagens)和基质蛋白(matrix proteins)等[1]。

cas2680-81-1_Dehydrodiisoeugenol_MedBio使用方法

cas2680-81-1_Dehydrodiisoeugenol_MedBio使用方法
货号
中文名称
英文名称
CAS
包装
纯度
MedBio
MED15914
Cytisine
Cytisine
485-35-8
10mM (in 1mL DMSO)
≥98%
品牌
货号
中文名称
英文名称
CAS
包装
纯度
MedBio
MED15802
vitexin-2″-o-rhamnoside
vitexin-2″-o-rhamnoside
Cyanidin-3-O-glucoside chloride
7084-24-4
20mg
≥98%
品牌
货号
中文名称
英文名称
CAS
包装
纯度
MedBio
MED15899
Coumarin
Coumarin
91-64-5
20mg
≥98%
品牌
货号
中文名称
英文名称
CAS
包装
纯度
MedBio
MED16438
Notopterol
Notopterol
88206-46-6
20mg
≥98%
64820-99-1
20mg
≥98%
品牌
货号
中文名称
英文名称
CAS
包装
纯度
MedBio
MED16138
Tenacissoside X
Tenacissoside X
10mg
≥98%
品牌
货号
中文名称
英文名称
CAS
包装
纯度
MedBio
MED16272

危险化学品目录表四

危险化学品目录表四
易燃液体,类别2
皮肤腐蚀/刺激,类别2
特异性靶器官毒性-一次接触,类别3(麻醉效应)
吸入危害,类别1
危害水生环境-急性危害,类别1
危害水生环境-长期危害,类别1
473
3,3-二甲基戊烷
2,2-二乙基丙烷
3,3-dimethylpentane;2,2 - diethyl-propane
562-49-2
479
二甲醚
甲醚
dimethyl ether
115-10-6
易燃气体,类别1
加压气体
480
二甲胂酸
二甲次胂酸;二甲基胂酸;卡可地酸;卡可酸
dimethylarsinic acid;arsinic acid, dimethyl-;cacodylic acid
75-60-5
急性毒性-经口,类别3*
急性毒性-吸入,类别3*
危害水生环境-急性危害,类别1
危害水生环境-长期危害,类别1
476
N,N-二甲基乙醇胺
N,N-二甲基-2-羟基乙胺;2-二甲氨基乙醇
2-dimethylaminoethanol;N,N-dimethylethanolamine;2-dimethylaminoethenol
108-01-0
易燃液体,类别3
严重眼损伤/眼刺激,类别2
皮肤腐蚀/刺激,类别2
110-71-4
易燃液体,类别2
生殖毒性,类别1B
489
二聚丙烯醛[稳定的]
acrolein dimer,stabilized
100-73-2
易燃液体,类别3
皮肤腐蚀/刺激,类别2
490
二聚环戊二烯
双茂;双环戊二烯;4,7-亚甲基-3a,4,7,7a-四氢茚

精神药品品种目录

精神药品品种目录

精神药品品种目录第一类1.布苯丙胺Brolamfetamine(DOB)2.卡西酮Cathinone3.二乙基色胺DET4.二甲氧基安非他明2,5-dimethoxyamfetamine(DMA)5.(1,2-二甲基庚基)羟基四氢甲基二苯吡喃 DMHP6.二甲基色胺DMT7.二甲氧基乙基安非他明DOET8.乙环利定Eticyclidine9.乙色胺Etryptamine10.麦角二乙胺(+)-Lysergide11.二亚甲基双氧安非他明MDMA12.麦司卡林Mescaline13.甲卡西酮Methcathinone14.甲米雷司4-methylaminorex15.甲羟芬胺MMDA16.乙芬胺N-ethyl,MDA17.羟芬胺N-hydroxy,MDA18.六氢大麻酚Parahexyl19.副甲氧基安非他明Parametoxyamphetamine(PMA)20.赛洛新Psilocine21.赛洛西宾Psilocybine22.咯环利定Rolicyclidine23.二甲氧基甲苯异丙胺STP,DOM24.替苯丙胺Tenamfetamine(MDA)25.替诺环定Tenocyclidine26.四氢大麻酚(包括其同分异构物及其立体化学Tetrahydrocannabinol变体)27.三甲氧基安非他明TMA28.4-甲基硫基安非他明4-methylthoamfetamine29.苯丙胺Amfetamine30.安非拉酮Amfepramone31.安咪奈丁Amineptine32.2,5-二甲氧基-4-溴苯已胺4bromo-2,5-dimethoxyphenethlami ne(2-CB)33.丁丙诺啡*Buprenorphine34.右苯丙胺Dexamfetamine35.二甲基安非他明Dimethylamphetamine36.芬乙茶碱Fenetylline37.氯胺酮*Ketamine38.左苯丙胺Levamfetamine39.左甲苯丙胺Levomethamphetamine40.马吲哚*Mazindol41.甲氯喹酮Mecloqualone42.去氧麻黄碱Metamfetamine43.去氧麻黄碱外消旋体MetamfetamineRacemate44.甲喹酮Methaqualone45.哌醋甲酯*Methylphenidate46.莫达非尼Modafinil47.苯环利定Phencyclidine48.芬美曲秦Phenmetrazine49.司可巴比妥*Secobarbital50.δ-9-四氢大麻酚及其立体化学变体 Delta-9-tetrahydrocannabinol anditsstereochemical variants51.三唑仑*Triazolam52.齐培丙醇Zipeprol第二类53.异戊巴比妥*Amobarbital54.布他比妥Butalbital55.布托啡诺及其注射剂*Butorphanolanditsinjection56.咖啡因*Caffeine57.去甲伪麻黄碱*Cathine58.安钠咖*CNB59.环已巴比妥Cyclobarbital60.地佐辛及其注射剂*Dezocineanditsinjection61.右旋芬氟拉明Dexfenfluramine62.芬氟拉明Fenfluramine63.氟硝西泮Flunitrazepam64.格鲁米特Glutethimide65.呋芬雷司Furfennorex66.喷他佐辛*Pentazocine67.戊巴比妥Pentobarbital68.丙己君Propylhexedrine69.阿洛巴比妥Allobarbital70.阿普唑仑*Alprazolam71.阿米雷司Aminorex72.巴比妥*Barbital73.苄非他明Benzfetamine74.溴西泮Bromazepam75.溴替唑仑Brotizolam76.丁巴比妥Butobarbital77.卡马西泮Camazepam78.氯氮卓*Chlordiazepoxide79.氯巴占Clobazam80.氯硝西泮Clonazepam81.氯拉卓酸Clorazepate82.氯噻西泮Clotiazepam83.氯口恶唑仑Cloxazolam84.地洛西泮Delorazepam85.地西泮*Diazepam86.艾司唑仑*Estazolam87.乙氯维诺Ethchlorvynol88.炔已蚁胺Ethinamate89.氯氟卓乙酯EthylLoflazepate90.乙非他明Etilamfetamine91.芬坎法明Fencamfamin92.芬普雷司Fenproporex93.氟地西泮Fludiazepam94.氟西泮*Flurazepam95.γ-羟丁酸*γ-hydroxybutyrate(GHB)96.哈拉西泮Halazepam97.卤沙唑仑Haloxazolam98.凯他唑仑Ketazolam99.利非他明Lefetamine100.氯普唑仑 Loprazolam101.劳拉西泮* Lorazepam102.氯甲西泮 Lormetazepam103.美达西泮 Medazepam104.美芬雷司 Mefenorex105.甲丙氨酯* Meprobamate106.美索卡 Mesocarb107.甲苯巴比妥 Methylphenobarbital 108.甲乙哌酮 Methyprylon109.咪达唑仑* Midazolam110.纳布啡及其注射剂* Nalbuphineanditsinjection 111.尼美西泮 Nimetazepam112.硝西泮* Nitrazepam113.去甲西泮 Nordazepam114.奥沙西泮 Oxazepam115.奥沙唑仑 Oxazolam116.匹莫林* Pemoline117.苯甲曲秦 Phendimetrazine118.苯巴比妥* Phenobarbital119.芬特明 Phentermine120.匹那西泮 Pinazepam121.哌苯甲醇 Pipradrol122.普拉西泮 Prazepam123.吡咯戊酮 Pyrovalerone124.仲丁比妥 Secbutabarbital125.替马西泮 Temazepam126.四氢西泮 Tetrazepam127.乙烯比妥 Vinylbital128.唑吡坦* Zolpiden129.扎来普隆* Zaleplone130.麦角胺咖啡因* ENC注:1.上述品种包括其可能存在的盐和单方制剂(除非另有规定)2.上述品种包括其可能存在的化学异构体及酯、醚(除非另有规定)3.品种目录有*的药品为我国生产及使用的品种。

氨基酸英语词汇各类常用英语词汇

氨基酸英语词汇各类常用英语词汇
operon [ 5opEron] 操纵子
orotic acid [ o:5rotik 5Asid] 乳清酸
ossification [ 7osifi5keiFEn] 成骨作用
oxaloacetic acid [ 7oksElEuE5si:tik 5Asid] 草酰乙酸
oxidases [ 5oksideisiz] 氧化酶类
L-Glutathione(Oxidized Form) L-谷胱甘肽(氧化型)
L-Glutathione(Reduced Form) L-谷胱甘肽(还原型)(Amresco)
L-Glutathione(Reduced Form) L-谷胱甘肽(还原型)(日本)
L-Histidine L-组氨酸
preproalbumin [ 7pri:prE5Albjumin] 前清蛋白原
primary structure [ 5praimEri 5strQktFE] 一级结构
primase [ 5praimeis] 引发酶
primer [ 5praimE] 引物
glucogenic amino acid [ 7glu:kEu5dVenik 5AminEu 5Asid] 生糖氨基酸
Adenine-Thymine pair A-T 腺嘌呤—胸腺嘧啶A-T结对
Guanine-Cytosine Pair G-C 腺苷--胞核嘧啶G-C结对
Adenosine 腺苷三磷酸盐图表 triphosphates' chart
nucleoside [ 5nju:kliEsaid] 核苷
DL-Methionine DL-甲硫氨酸
Glycine 甘氨酸
L-Alanine L-丙氨酸(Sigma)

去乙酰毛花苷注射液Deslanoside-详细说明书与重点

去乙酰毛花苷注射液Deslanoside-详细说明书与重点

去乙酰毛花苷注射液Deslanoside 英文名称: Deslanoside Injection【成分】本品主要成份为去乙酰毛花苷。

化学名称:3-[0-β-D-葡吡喃糖基-(1→4)-O-2,6-二脱氧-β-D-核-已吡喃糖基-(1→4)-O-2,6-二脱氧-β-D-核-已吡喃糖基-(1→4)-O-2,6-二脱氧-β-D-核-已吡喃糖基)氧代]-12,14-二羟基-心甾-20(22)-烯内酯。

辅料:乙醇、甘油、注射用水。

【性状】本品为无色的澄明液体。

【适应症】1.主要用于心力衰竭。

由于其作用较快,适用于急性心功能不全或慢性心功能不全急性加重的患者。

2.亦可用于控制伴快速心室率的心房颤动、心房扑动患者的心室率。

3.终止室上性心动过速起效慢,已少用。

【规格】2ml:0.4mg【用法用量】静脉注射-成人常用量:用5%葡萄糖注射液稀释后缓慢注射,首剂0.4~0.6mg(1-1.5支),以后每2~4小时可再给0.2~0.4mg(0.5-1支),总量1~1.6mg(2.5-4支)。

小儿常用量:按下列剂量分2~3次间隔3~4小时给予。

早产儿和足月新生儿或肾功能减退、心肌炎患儿,肌内或静脉注射按体重0.022mg/㎏,2周~3岁,按体重0.025mg/㎏。

本品静脉注射获满意疗效后,可改用地高辛常用维持量以保持疗效。

【不良反应】1.常见的不良反应包括:新出现的心律失常、胃纳不佳或恶心、呕吐(刺激延髓中枢)、下腹痛、异常的无力、软弱。

2.少见的反应包括:视力模糊或"黄视"(中毒症状)、腹泻、中枢神经系统反应如精神抑郁或错乱。

3.罕见的反应包括:嗜睡、头痛及皮疹、荨麻疹(过敏反应)。

4.在洋地黄的中毒表现中,心律失常最重要,最常见者为室性早搏,约占心脏反应的33%。

其次为房室传导阻滞,阵发性或加速性交界性心动过速,阵发性房性心动过速伴房室传导阻滞,室性心动过速、窦性停搏、心室颤动等。

儿童中心律失常比其他反应多见,但室性心律失常比成人少见。

仿制药参比制剂目录(第五十二批)2022年3月

仿制药参比制剂目录(第五十二批)2022年3月
Sanofi-Aventis Deutschland GmbH
未进口原研药品
欧盟上市
52-49
阿替卡因肾上腺素注射液
Articaine Hydrochloride And Epinephrine Injection/Ultracain D-S forte
2ml(40mg/ml盐酸阿替卡因+0.012mg/ml盐酸肾上腺素)
欧盟上市
52-16
托伐普坦口崩片
Tolvaptan Orally Disintegrating Tablets/Samsca®OD
7.5mg
大塚製薬株式会社
未进口原研药品
日本上市
52-17
托伐普坦口崩片
Tolvaptan Orally Disintegrating Tablets/Samsca®OD
0.25g
Dr. Falk Pharma GmbH
国内上市的原研药品
原研进口
52-29
美沙拉秦栓
Mesalazine Suppositories/Salofalk(莎尔福)
1g
Dr. Falk Pharma GmbH
国内上市的原研药品
原研进口
52-30
美沙拉秦灌肠液
Mesalazine Enemas/Salofalk(莎尔福)
未进口原研药品
欧盟上市
52-44
左炔诺孕酮片
Levonorgestrel Tablets
0.75mg
Gedeon Richter Plc.
未进口原研药品
欧盟上市
52-45
溴吡斯的明片
Pyridostigmine Bromide Tablets/Mestinon

CAS号86347-15-1_Medetomidine HCl_MedBio_合成结构

CAS号86347-15-1_Medetomidine HCl_MedBio_合成结构
10mg
≥98%
品牌
货号
中文名称
英文名称
CAS
包装
纯度
MedBio
MED13199
O-1602
O-1602
317321-41-8
5mg
≥98%
品牌
货号
中文名称
英文名称
CAS
包装
纯度
MedBio
MED12661
Ciclesonide
Ciclesonide
126544-47-6
10mg
≥98%
品牌
货号
中文名称
CAS
1、Medetomidine (hydrochloride)物理参数:
常用名
盐酸美托咪啶
英文名
Medetomidine (hydrochloride)
CAS号
86347-15-1
分子量
236.740
密度
无资料
沸点
381.9ºC at 760 mmHg
分子式
C13H17ClN2
熔点
164-166°C
MED12594
Tetrahydrozoline HCl
Tetrahydrozoline HCl
522-48-5
5g
≥98%
品牌
货号
中文名称
英文名称
CAS
包装
纯度
MedBio
MED12687
MRS 2179 tetrasodium salt
MRS 2179 tetrasodium salt
1454889-37-2
Nedaplatin
95734-82-0
10mg
≥98%
品牌
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

Inhibitors, Agonists, Screening LibrariesSafety Data Sheet Revision Date:Jan.-22-2018Print Date:Jan.-22-20181. PRODUCT AND COMPANY IDENTIFICATION1.1 Product identifierProduct name :Desipramine hydrochlorideCatalog No. :HY-B1272CAS No. :58-28-61.2 Relevant identified uses of the substance or mixture and uses advised againstIdentified uses :Laboratory chemicals, manufacture of substances.1.3 Details of the supplier of the safety data sheetCompany:MedChemExpress USATel:609-228-6898Fax:609-228-5909E-mail:sales@1.4 Emergency telephone numberEmergency Phone #:609-228-68982. HAZARDS IDENTIFICATION2.1 Classification of the substance or mixtureGHS Classification in accordance with 29 CFR 1910 (OSHA HCS)Acute toxicity, Oral (Category 4), H302Skin irritation (Category 2), H315Eye irritation (Category 2A), H319Respiratory sensitisation (Category 1), H334Skin sensitisation (Category 1), H317Specific target organ toxicity - single exposure (Category 3), Respiratory system, H3352.2 GHS Label elements, including precautionary statementsPictogramSignal word DangerHazard statement(s)H302 Harmful if swallowed.H315 Causes skin irritation.H317 May cause an allergic skin reaction.H319 Causes serious eye irritation.H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.H335 May cause respiratory irritation.Precautionary statement(s)P261 Avoid breathing dust ⁄ fume ⁄ gas ⁄ mist ⁄ vapours ⁄ spray.P264 Wash skin thoroughly after handling.P270 Do not eat, drink or smoke when using this product.P271 Use only outdoors or in a well-ventilated area.P272 Contaminated work clothing should not be allowed out of the workplace.P280 Wear protective gloves ⁄ eye protection ⁄ face protection.P285 In case of inadequate ventilation wear respiratory protection.P301 + P312 IF SWALLOWED: Call a POISON CENTER or doctor ⁄ physician if you feel unwell.P302 + P352 IF ON SKIN: Wash with plenty of soap and water.P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.Continue rinsing.P321 Specific treatment (see supplemental first aid instructions on this label).P330 Rinse mouth.P333 + P313 If skin irritation or rash occurs: Get medical advice ⁄ attention.P337 + P313 If eye irritation persists: Get medical advice ⁄ attention.P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTER or doctor ⁄physician.P362 Take off contaminated clothing and wash before reuse.P403 + P233 Store in a well-ventilated place. Keep container tightly closed.P405 Store locked up.P501 Dispose of contents ⁄ container to an approved waste disposal plant.2.3 Other hazardsNone.3. COMPOSITION/INFORMATION ON INGREDIENTS3.1 SubstancesSynonyms:Desmethylimipramine hydrochloride; G–35020Formula:C18H23ClN2Molecular Weight:302.84CAS No. :58-28-64. FIRST AID MEASURES4.1 Description of first aid measuresEye contactRemove any contact lenses, locate eye-wash station, and flush eyes immediately with large amounts of water. Separate eyelids with fingers to ensure adequate flushing. Promptly call a physician.Skin contactRinse skin thoroughly with large amounts of water. Remove contaminated clothing and shoes and call a physician.InhalationImmediately relocate self or casualty to fresh air. If breathing is difficult, give cardiopulmonary resuscitation (CPR). Avoid mouth-to-mouth resuscitation.IngestionWash out mouth with water; Do NOT induce vomiting; call a physician.4.2 Most important symptoms and effects, both acute and delayedThe most important known symptoms and effects are described in the labelling (see section 2.2).4.3 Indication of any immediate medical attention and special treatment neededTreat symptomatically.5. FIRE FIGHTING MEASURES5.1 Extinguishing mediaSuitable extinguishing mediaUse water spray, dry chemical, foam, and carbon dioxide fire extinguisher.5.2 Special hazards arising from the substance or mixtureDuring combustion, may emit irritant fumes.5.3 Advice for firefightersWear self-contained breathing apparatus and protective clothing.6. ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency proceduresUse full personal protective equipment. Avoid breathing vapors, mist, dust or gas. Ensure adequate ventilation. Evacuate personnel to safe areas.Refer to protective measures listed in sections 8.6.2 Environmental precautionsTry to prevent further leakage or spillage. Keep the product away from drains or water courses.6.3 Methods and materials for containment and cleaning upAbsorb solutions with finely-powdered liquid-binding material (diatomite, universal binders); Decontaminate surfaces and equipment by scrubbing with alcohol; Dispose of contaminated material according to Section 13.7. HANDLING AND STORAGE7.1 Precautions for safe handlingAvoid inhalation, contact with eyes and skin. Avoid dust and aerosol formation. Use only in areas with appropriate exhaust ventilation.7.2 Conditions for safe storage, including any incompatibilitiesKeep container tightly sealed in cool, well-ventilated area. Keep away from direct sunlight and sources of ignition.Recommended storage temperature:Powder-20°C 3 years4°C 2 yearsIn solvent-80°C 6 months-20°C 1 monthShipping at room temperature if less than 2 weeks.7.3 Specific end use(s)No data available.8. EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parametersComponents with workplace control parametersThis product contains no substances with occupational exposure limit values.8.2 Exposure controlsEngineering controlsEnsure adequate ventilation. Provide accessible safety shower and eye wash station.Personal protective equipmentEye protection Safety goggles with side-shields.Hand protection Protective gloves.Skin and body protection Impervious clothing.Respiratory protection Suitable respirator.Environmental exposure controls Keep the product away from drains, water courses or the soil. Cleanspillages in a safe way as soon as possible.9. PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical propertiesAppearance White to off-white (Solid)Odor No data availableOdor threshold No data availablepH No data availableMelting/freezing point No data availableBoiling point/range No data availableFlash point No data availableEvaporation rate No data availableFlammability (solid, gas)No data availableUpper/lower flammability or explosive limits No data availableVapor pressure No data availableVapor density No data availableRelative density No data availableWater Solubility No data availablePartition coefficient No data availableAuto-ignition temperature No data availableDecomposition temperature No data availableViscosity No data availableExplosive properties No data availableOxidizing properties No data available9.2 Other safety informationNo data available.10. STABILITY AND REACTIVITY10.1 ReactivityNo data available.10.2 Chemical stabilityStable under recommended storage conditions.10.3 Possibility of hazardous reactionsNo data available.10.4 Conditions to avoidNo data available.10.5 Incompatible materialsStrong acids/alkalis, strong oxidising/reducing agents.10.6 Hazardous decomposition productsUnder fire conditions, may decompose and emit toxic fumes.Other decomposition products - no data available.11.TOXICOLOGICAL INFORMATION11.1 Information on toxicological effectsAcute toxicityClassified based on available data. For more details, see section 2Skin corrosion/irritationClassified based on available data. For more details, see section 2Serious eye damage/irritationClassified based on available data. For more details, see section 2Respiratory or skin sensitizationClassified based on available data. For more details, see section 2Germ cell mutagenicityClassified based on available data. For more details, see section 2CarcinogenicityIARC: No component of this product present at a level equal to or greater than 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.ACGIH: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by ACGIH.NTP: No component of this product present at a level equal to or greater than 0.1% is identified as a anticipated or confirmed carcinogen by NTP.OSHA: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by OSHA.Reproductive toxicityClassified based on available data. For more details, see section 2Specific target organ toxicity - single exposureClassified based on available data. For more details, see section 2Specific target organ toxicity - repeated exposureClassified based on available data. For more details, see section 2Aspiration hazardClassified based on available data. For more details, see section 2Additional informationRTECS No.: HO0525000This information is based on our current knowledge. However the chemical, physical, and toxicological properties have not been completely investigated.12. ECOLOGICAL INFORMATION12.1 ToxicityNo data available.12.2 Persistence and degradabilityNo data available.12.3 Bioaccumlative potentialNo data available.12.4 Mobility in soilNo data available.12.5 Results of PBT and vPvB assessmentPBT/vPvB assessment unavailable as chemical safety assessment not required or not conducted.12.6 Other adverse effectsNo data available.13. DISPOSAL CONSIDERATIONS13.1 Waste treatment methodsProductDispose substance in accordance with prevailing country, federal, state and local regulations.Contaminated packagingConduct recycling or disposal in accordance with prevailing country, federal, state and local regulations.14. TRANSPORT INFORMATIONDOT (US)This substance is considered to be non-hazardous for transport.IMDGThis substance is considered to be non-hazardous for transport.IATAThis substance is considered to be non-hazardous for transport.15. REGULATORY INFORMATIONSARA 302 Components:No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.SARA 313 Components:This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.SARA 311/312 Hazards:No SARA Hazards.Massachusetts Right To Know Components:No components are subject to the Massachusetts Right to Know Act.Pennsylvania Right To Know Components:No components are subject to the Pennsylvania Right to Know Act.New Jersey Right To Know Components:No components are subject to the New Jersey Right to Know Act.California Prop. 65 Components:This product does not contain any chemicals known to State of California to cause cancer, birth defects, or anyother reproductive harm.16. OTHER INFORMATIONCopyright 2017 MedChemExpress. The above information is correct to the best of our present knowledge but does not purport to be all inclusive and should be used only as a guide. The product is for research use only and for experienced personnel. It must only be handled by suitably qualified experienced scientists in appropriately equipped and authorized facilities. The burden of safe use of this material rests entirely with the user. MedChemExpress disclaims all liability for any damage resulting from handling or from contact with this product.Caution: Product has not been fully validated for medical applications. For research use only.Tel: 609-228-6898 Fax: 609-228-5909 E-mail: tech@Address: 1 Deer Park Dr, Suite Q, Monmouth Junction, NJ 08852, USA。

相关文档
最新文档