霍尼韦尔艾顿(ALERTON)设计编程手册

合集下载

EBT用户操作手册

【项目名称】Honeywell EBT系统培训教材200x年x月目录目录 (1)第一章Alerton公司介绍 (3)第二章【项目名称】楼宇自控系统介绍 (4)1、冷水机组和辅助设备系统 (5)2、给排水系统 (5)3、变配电及备用应急电源系统 (6)4、照明系统 (6)5、楼层插座总电源箱 (6)6、空调机系统 (6)7、通排风系统 (7)8、风机盘管 (7)9、双电源系统 (7)10、电梯 (7)第三章Envision for BACtalk简介 (8)1、Envision for BACtalk (8)1）BACtalk BAS系统架构及组件 (11)2）关于BACnet标准 (12)3）Envision for BACtalk基本功能 (16)2、国税Envision for BACtalk菜单基本功能 (20)1）BACtalk: (21)2）“编辑”： (25)3)“视图”： (26)4）“工具"： (27)5)“帮助”: (29)第四章进入和退出EBT楼宇自控系统 (30)1、开机 (30)2、登录 (30)3、退出 (31)4、系统自动退出设定方法 (32)第五章报警显示与处理 (34)1、报警历史记录 (34)2、报警弹出对话框 (35)第六章图形界面操作 (36)1、制冷机组及辅助设备系统 (36)2、空调通风系统 (37)3、通排风机系统 (41)4、给排水系统 (42)5、变配电及备用应急电源系统 (45)6、双电源 (46)7、电梯系统 (47)8、照明 (48)9、风机盘管 (49)10、插座总电源箱 (50)第七章用户活动记录查询 (52)第八章项目的备份和恢复 (53)1、项目备份 (53)2、项目恢复 (55)第九章系统维护与处理 (58)第十章附录(网络配置图、各子系统原理图） (60)第一章Alerton公司介绍美国艾顿(Alerton）公司位于美国西雅图Redmon区，成立于1980年，主要业务为开发、生产直接式DDC控制器、传感器及相关配件产品.并在业界率先推出了符合BACnet通讯协议的产品-Envisionfor BACtalk，是世界上第一个使用BACnet标准通讯协议的楼宇系统生产产商；是全球BACnet楼宇自动化系统领域著名的制造商；符合公认的TCP/IP，BACnet工业标准结构。

艾顿（Eaton）应用说明书-建筑机械平台 W-ACOV-MC001-E1

Application Matrix -Construction Equipment Platform Array The listed product families are general proposals by Eaton and should be confirmed based on pressure and size requirements for the specific application. Refer to the appropriateEaton product line catalog for the complete line of Eaton fluid conveyance product offering or contact Eaton technical support for additional product information.Hyd. Steering• Hose - H280• Adapters - SAE ORB/STC• H ose Fittings - SAE ORFS/STC Hyd. Brake Valve• Hose - H280, H290• Adapters - SAE ORB/STC• H ose Fittings - SAE ORFS/STCImplement Valve Supply• Hose - H280, H290• Adapters - SAE ORB/STC• H ose Fittings - SAE ORFS/STCOutriggers• Hose - H290• Adapters - SAE ORB• H ose Fittings - SAE ORFS• Protective Sleeve - A39 Series/A49 Series Backhoe Knuckle • Hose - H290, H430• Adapters - SAE ORB • H ose Fittings - SAE ORFS • P rotective Sleeve - A39 Series/A49 Series Attachments & Accessories • Hose - H290, H430• Quick Disconnect Couplings - FD89, FD99• Hose F ittings - SAE ORFS • Protective Sleeve - A39 Series/A49 Series• H ose Fittings - SAE ORFS/Code 61/62 Flange• Hose - H280• Adapters - SAE ORB/STC• H ose Fittings - SAE ORFS/STC Boom, Bucket, Dipper Stick • H ose - H290. H430• A dapters - SAE ORB • H ose Fittings - SAE ORFS • P rotective Sleeve - A39 Series/A49 SeriesHydrostatic Drivedapters - SAE ORB/Code 61/62 Flangeittings - SAE ORFS/Code 61/62 Flangerotective Sleeve - A39 Series/• Adapters - SAE ORB/STC• Hose F ittings - SAE ORFS/STC Cooler Supply and Return/Fuel • Hose - H190, H069• Adapters - SAE ORB/STC • H ose F ittings - SAE ORFS/STCImplement Valve Supply• Hose - H290, H280• Adapters - SAE ORB/STC• H ose F ittings - SAE ORFS/STCHyd. Pump Supply/Suction • H ose - Pressure H464, H290• Hose - Suction H039• A dapters - SAE ORB/Code Attachments & Accessories • Quick Disconnect Couplings - FD89, FD99EatonHydraulics Business USA 14615 Lone Oak Road Eden Prairie, MN 55344 USATel: 952-937-9800Fax: 952-294-7722 /hydraulics EatonHydraulics Business EuropeRoute de la Longeraie 71110 MorgesSwitzerlandTel: +41 (0) 21 811 4600Fax: +41 (0) 21 811 4601EatonHydraulics Group Asia PacificEaton BuildingNo.7 Lane 280 Linhong RoadChangning District,Shanghai 200335ChinaTel: (+86 21) 5200 0099Fax: (+86 21) 2230 7240© 2013 EatonAll Rights ReservedPrinted in USADocument No. W-ACOV-MC001-E1 October 2013。

Alerton现场设备手册_fin

技术规格说明
5NM，24Vac/Vdc, 浮点控制 5NM，24Vac/Vdc, 模拟控制 , 有电压反馈信号 10NM，24Vac/Vdc, 浮点控制 10NM，24Vac/Vdc, 模拟控制 , 有电压反馈信号 20NM，24Vac/Vdc, 浮点控制 20NM，230Vac，浮点控制 20NM，24Vac/Vdc, 模拟控制 , 有电压反馈信号 34NM，24Vac/Vdc, 浮点控制 34NM，230Vac，浮点控制 34NM，24Vac/Vdc, 模拟控制 , 有电压反馈信号
阀体 ● 端口：法兰连接，符合 IS07005-2 ● 材料：铸铁 GG25（PN16）
组件 ● 阀座不锈钢 ● 阀塞不锈钢 ● 阀杆不锈钢
介质温度和相对压力 ● PN16 ● 2~120℃ 最大 1600kpa ● 120~150℃ 最大 1440kpa ● 150~200℃ 最大 1280kpa ● 200~220℃ 最大 1200kpa
2
控制球阀
概述
该系列控制球阀应用于供暖，通风及空调设备的水路控制，可提供开关或模拟量控制。
功能和特点
◆ BSPP 连接的铸铜阀体 ◆ 低泄漏率 ◆ PN16 的压力等级 ◆ 长寿命设计的弹簧支撑球座 ◆ 短小精悍的结构尺寸 ◆ 极强的自动清理功能 ◆ 精确的控制确保达到理想的温度控制状态 ◆ 能和电子执行器直接耦合的设计使安装简便
24V/AC/DC，-15…+20% 2W 5Nm，10Nm -20…+60℃ 5…95%, 不结霜圆型连杆：10-16mm 方型连杆：6-13mm 连杆长度：最小 41mm IP54 全程 60,000 次 1,500,000 次 450 克 35dB, 一米处 95o±3o

建筑设备自动化系统-霍尼韦尔(Honeywell)

12
霍尼韦尔（Honeywell）
3、 Excel8000系列
序号内容 Excel8000系列
9
推出时
2002年
间
10
应用业
业绩较多
绩
11
控制器全以太网结构不具备竞争力，主打总线结构产品（该系列为霍尼HBS系统部针对项目研发的产品）；适
性价比合小型项目。
13
单元二国内外常用控制器简介
四、霍尼韦尔（Honeywell）
3、 Excel8000系列
序号内容
Excel8000系列
5
CP-IPC 除了提供与以太网的连接功能以外，还提供24个输入和输出硬件点，如果连接扩展模块
网络控制器 CP -EXPIO ，输入输出点可以扩展到128点。CP-IPC还支持3条独立的MS/TP通道，每条通道可
（管理级）以连接30台单元控制器，即每个CP-IPC控制器支持90台单元控制器。
控制器口
的CPU •高性能32位CPU
优势：内存及存储容量大
15
霍尼韦尔（Honeywell）
4、WEBs系列
序号内容 WEBs系列
4
网络连接直接以太网／局域网连接；网络链路出现故障时只影响单个控制器，网络速率10/100MBps
5
•内置Niagara平台
•2个以太网口，自带WIFI
网络控制 •自带USB接口，可用于备份和恢复
间
10
应用业
业绩较多，而且增长速度最快
绩
11
控制器系统性价比高，特别是全以太网结构，其核心8000控制器为Niagara平台全进口产品，现场以太网控制
性价比器为产品事业部HBT研发

艾顿120660产品说明书

Eaton 120660Eaton Moeller series xPole - mRB4/6 RCBO - residual-current circuit breaker with overcurrent protection. RCD/MCB, 16A, 30mA, C-LS-Char, 3N pole, FI-Char: AGeneral specificationsEaton Moeller series xPole - mRB4/6 RCBO - residual-current circuit breaker with overcurrent protection120660401508118490380 mm 75.5 mm 70 mm 0.445 kg RoHS conform CEmRB6-16/3N/C/003-AProduct NameCatalog Number EANProduct Length/Depth Product Height Product Width Product Weight Compliances Certifications Model CodeTri-stable slide catch - enables removal from existing busbar combination16 AIs the panel builder's responsibility. The specifications for the switchgear must be observed.2 mm6 kAMeets the product standard's requirements.Is the panel builder's responsibility. The specifications for the switchgear must be observed.3Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.6 kA50 HzIs the panel builder's responsibility.40.03 ABusbar tag shroud to VBG4eaton-xpole-mrb4-rcbo-catalog-ca019058en-en-us.pdfeaton-xpole-mrb6-rcbo-catalog-ca019057en-en-us.pdf03_mRB-3p_200416DA-DC-03_mRB-3N03_mRB-3N_281118eaton-mcb-xpole-mrb4-6-characteristic-curve.epseaton-xeffect-frbm6/m-characteristic-curve-002.jpgeaton-mcb-xpole-mrb4-6-dimensions.epseaton-xeffect-frbm6/m-dimensions-004.jpgDimensions xPole mRB4/mRB6 3N3D Drawing xPole mRB4/mRB6 3NIL019140ZUeaton-xpole-combined-mcb-rcd-device-rcbo-packaging-manual-multilingual.pdfDA-CS-faz_3pn_4pDA-CD-faz_3pn_4pCharacteristics xPole mRB4/mRB6 3Neaton-xeffect-frbm6/m-wiring-diagram-002.jpgeaton-mcb-xpole-mrb4-6-wiring-diagram.epsContact Sequence xPole mRB4/mRB6 3NMounting styleRated operational current for specified heat dissipation (In) 10.11 Short-circuit ratingMaterial thicknessRated switching capacity (IEC/EN 61009)10.4 Clearances and creepage distances10.12 Electromagnetic compatibilityCurrent limiting class10.2.5 Lifting10.2.3.1 Verification of thermal stability of enclosures Rated short-circuit breaking capacity (EN 60947-2) Frequency rating10.8 Connections for external conductorsNumber of poles (total)Fault current ratingTerminal protection Catalogues Certification reports Characteristic curve DrawingsInstallation instructions mCAD modelTime/current curves Wiring diagramsSensitivity typeType A, pulse-current sensitiveRated fault currents of product range30, 100, 300 MilliAmpereAmbient operating temperature - max40 °CHeat dissipation per pole, current-dependent0 WClimatic proofingIEC 68-2: 25 °C - 55 °C at 90 % - 95 % humidityBuilt-in depth70 mmDegree of protection (built in)IP40FeaturesConcurrently switching N-neutralBack-up fuse100 Ampere gLConnectable conductor cross section (solid-core) - min 1 mm²10.9.3 Impulse withstand voltageIs the panel builder's responsibility.Number of polesThree-pole + NAmbient operating temperature - min-25 °C10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated.Selectivity class310.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.Rated switching capacity6 kAEquipment heat dissipation, current-dependent10.9 WTripping characteristicC10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.10.9.4 Testing of enclosures made of insulating materialIs the panel builder's responsibility.Static heat dissipation, non-current-dependent0 WApplicationSwitchgear for residential and commercial applications10.3 Degree of protection of assembliesDoes not apply, since the entire switchgear needs to be evaluated.Voltage typeACNumber of poles (protected)4Leakage current typeAFrame45 mmRated short-circuit breaking capacity (EN 61009-1)6 kATrippingNon-delayedOperating ambient temperature - min-25 °CTerminals (top and bottom)Twin-purposeHeat dissipation capacity0 WRelease characteristicCImpulse withstand currentPartly surge-proof, 250 AVoltage rating at AC230 V / 400 VProduct rangemRB6Width in number of modular spacings4Power loss0 W10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effectsMeets the product standard's requirements.Rated short-circuit breaking capacity (EN 61009)6 kAOperating ambient temperature - max40 °CVoltage rating400 V10.9.2 Power-frequency electric strengthIs the panel builder's responsibility.Connectable conductor cross section (solid-core) - max25 mm²Degree of protectionIP20Overvoltage categoryIIIPollution degree210.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.Connectable conductor cross section (multi-wired) - min1 mm²Rated impulse withstand voltage (Uimp)4 kVRated non-tripping current0.5 x I∆n10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Basic functionCombined RCD/MCB devicesStandardsIEC/EN 61009Rated current16 ARated switching capacity (IEC/EN 60947-2)6 kAOperating ambient temperature hintKeep in mind the derating at temperatures higher than 40 °CSolid terminal capacities1 - 25 Square MillimeterConnectable conductor cross section (multi-wired) - max25 mm²TypeRCBO10.2.2 Corrosion resistanceMeets the product standard's requirements.Surge current capacity0.25 kA10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard's requirements.10.2.7 InscriptionsMeets the product standard's requirements.Rated short-circuit breaking capacity (IEC 60947-2)0 kADevice height80 mmDisconnection characteristicUndelayedProduct applicationEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All rights reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaSwitchgear for industrial and advanced commercial applications 400 V6 - 25 Ampere500 VRated operational voltage (Ue) - max Rated current of product range Rated insulation voltage (Ui)。

艾顿定式切换器产品培训说明书

Eaton definite purpose control product trainingDefinite purpose contactorsand starters offeringDP contactor seriesDP starter seriesAccessoriesWhat is a definite purpose contactor?•Definite purpose contactors and starters are electrically operated switching devices specifically designed for the heating,ventilation, air conditioning and refrigeration (HVACR) industry•Typically controlled by automatic thermostat control or manual pushbutton interfaces•Most commonly found in applications such as refrigeration, air conditioning and resistance heating (HVACR)•Suitable for low-cycle duty applications requiring low cost switching of single-and three-phase loads•Designed to handle small motors and resistive heating loads with cycle rates that are lowAvailabilityUniversal footprintReliabilityCustomized optionsReduced cost Up-to-date certifications What do customers require for DP applications?Target applicationsPool and Spa Equipment Pumps Refrigeration HVAC &compressors•Definite purpose contactors and starters are electrically operated switching devices specifically designed for the heating, ventilation, air conditioning and refrigeration (HVACR)industry.•Typically controlled by automatic thermostat control or manual pushbutton interfaces.•Suitable for low duty-cycle applications requiring low cost switching of single-and three-phase loads,such as small motors and resistive heating loads.DP catalog numbering systemDP contactors product offeringCompact DP (20A –40A)• 1 pole & 1 pole w/shunt: 25A, 30A & 40A • 2 pole: 20A, 25A, 30A and 40AStandard DP (15A –50A)• 2 pole & 3 pole 15-50A • 4 pole 25-40A only•NEMA 1 enclosedoption60A –90A • 2 pole & 3 pole•NEMA 1enclosed option(60A)120A –360A • 3 poleDP starters product offering25–60A, single-and three-phase—A25, B25•C25 DP contactors and Freedom series bi-metallic ambient compensated overload relays mounted on a common mounting plate 15–45A, single-and three-phase—A27, B27•C25 DP contactors and XT series bi-metallic ambientcompensated overload relays 15–75A, single-and three-phase—A30, B30•C25 DP contactors andC440/XT electronic overload relay mounted on a common mounting plate Enclosed starters •25–60A starters—A25, B25•15–45A starters—A27, B27DP terminal optionsBinding head screws Screw withpressureBox lugsQuick connects(Line, load, coil terminals )DP accessories•Top & side mount auxiliary contacts •Top mount fuse block•Pneumatic & solid state timers •Mechanical interlockThe universal mounting plateeliminates changing hole patterns when replacing competitive devicesQuick coil changing ability allows for easy maintenanceRemovable front cover for contact inspectionEnclosed housing –sealedcontactorPlastic side shields added tocontactor to keep outcontaminantsDIN rail mountcapability available asfactory assembledoptionShrouded or fingerproof terminalsreduce possibility ofelectrical shockQuestions to ask –DP contactor •How many poles?•What amps rating is needed?•What is the motor voltage?•What is the control voltage being used (coil voltage)?•What type of terminals are needed?•Do you need any additional “auxiliary contacts”?Questions to ask –DP starter•How many poles?•What amp rating is needed?•What is the motor voltage (V, single-phase or three-phase)?•What is the control voltage being used (coil voltage)?•What type of terminals are needed?•What is the “horsepower” or “full load amps (FLA)” of the motor/pump?•What type of overload protection is needed (bi-metallic, solid state)?•Do you need any additional “auxiliary contacts?”DP recommended stocking listCompact DPsStandard DPsC25CNB130T COMPACT 1P W/SHUNT 30A CONT SCR TERM QUAD QC 24VAC COIL C25BNB220A COMPACT 2P 20A CONT SCR TERM QUAD QC 120VAC COIL C25BNB230A COMPACT 2P 30A CONT SCR TERM QUAD QC 120VAC COIL C25BNB230T COMPACT 2P 30A CONT SCR TERM QUAD QC 24VAC COIL C25BNB230B COMPACT 2P 30A CONT SCR TERM QUAD QC 240VAC COIL C25BNF230T COMPACT 2P 30A CONT BOX LUG TERM QUAD QC 24VAC COIL C25BNF240TCOMPACT 2P 40A CONT BOX LUG TERM QUAD QC 24VAC COILC25DND230A OPEN N-R 2P 30A DP CONT SCR/PP W/QC TERM 120VAC COIL C25DND230B OPEN 2P 30A DP CONT SCR/PP W/QC TERM 240VAC COIL C25DND325A OPEN 3P 25A DP CONT SCR/PP W/QC TERM 120VAC COIL C25DND330A OPEN 3P 30A DP CONT SCR/PP W/QC TERM 120VAC COIL C25DNF340A OPEN 40A DP CONT BOX LUGS W/QC TERM 120VAC COIL C25DNF340B OPEN 3P 40A DP CONT BOX LUGS W/QC TERM 240VAC COIL C25END430ADP CONT 30A 4P OPN 120VA30CNE30AA5E020DP STARTER 3P OPEN 30A 4-20A OL 120V COIL 1NO COM CTL LUGSC320KG11NO AUX CONT FOR 15-75A DP CONT C320KG21NC AUX CONT FOR 15-75A DP CONT C320KG31NO-NC AUX CONT FOR 15-75A DP CONT C320KG121NC AUX CONT FOR 15-75A DP CONTC320SNP111NO-1NC SPDT SIDE MOUNT AUX CONT FOR 15-75 AMP DP CONTACTOR 9-3185-150 MM DP COIL, 15-40 AMP, 110/120 VAC 9-3185-650 MM DP COIL, 15-40 AMP, 24 VACAccessoriesStartersDefinite purpose contactors / starters overviewDP contactor offering•1P & 2P compact 20A-40A•3P 15A –360A•4P 25A –40A•FVR 15A –75ADP starter offering•15A –75APoints of difference•Eaton is a market leader in DP contactors & starters •Competitive cross reference•Competitive tear down comparison•Enclosed offering (up to 60A)•Customized terminal options and mounted accessories to meet customer demands•Bi-metallic and solid state overloads for starters •Lower cost solution versus IEC / NEMA Customer value•Universal mounting plate•Variety of terminal options•Shrouded or finger proof terminals reduce possibility of electrical shock•Range of accessories available•3D drawings available•UL 1995 4th edition testing completed•Robust product design –meets environmental & safety requirementsFor more information•Eaton product catalog•Volume 5, Tab 4: Definite purpose contactors and starters•DP competitive cross reference•Publication No. MZ03507001E / Z12403•DP trifold: Publication No. BR035002EN / MOTC •Competitive teardown analysis•Website: /dp•Eaton’s technical resource center•1-877-ETN-CARE, option 2, option 2•*************。

某酒店附属楼ALERTON系统设计

５２ｍ５．ｍ，最大积雪厚度为１０５４ｍｍ。
２ＡＬＲＯＮ系统设计与设备选型ＥＴ
ＡＥＴＮ系统设计采用共享总线型网络拓扑ＬＲＯ结构，通过两条ＭＳＴ＆ＢＣｅ现场控制总线，／ＰＡｎｔ连接分布在各楼层的ＥｖｓｎｆＡＣａｎｉｏｒｉｏＢｔｋ系统的ｌＤＣ控制器来实现数据的共享和控制的分散。楼Ｄ宇白控设备控制系统图如图１所示。
ＺＨＡ０ＵＨｉ
（ｈｎｏｇｏａｉａＣｌｇｆｎｕｔ，Ｚｂ２６１，ＣｉａＳａｄｎｃｔｎｌｏｅｅｄｓｙｉｏ５４４ｈｎ）ＶｏｌｏＩｒ
Ａｂｓｒｃ：ＴｉａｅｉｄａｈｏｅｔａｔｈｓｐｐｒａｍｅｔｔｅｈｔｌＨＶＡＣｓｓｅｄｓｇｎｑｉｍｅｔｓｌｃｉｎ．ＵｓｎＥＲＴＯＮｙｔｍｏｃｎｒｌａｌｔｉｙｔｍｅｉｎａｄｅｕｐｎｅｅｔｏｉｇＡＬｓｓｅｔｏｔｏｌｈｅａｒｃｎｉｏｉｇｓｓｅｅｕｐｎ，ａｄｔｅｃｎｒｌｚｄｍｏｉｏｉｇｏｅｑｉｍｅｔｒｎｉｇｓａｕｎｅｔｃｎｉａａａｔｒｉｄｐｅｎｏｄｔｎｎｙｔｍｑｉｍｅｔｎｈｅｔａｉｅｎｔｒｎｆｋｙｅｕｐｎｕｎｎｔｔｓａｄｔｅｈｃｌｒｍｅｅｓａｏｔｄｉｉｈｐｏｄｒｔｅｌｚｅｔａｉｏｄｔｎｎｎｒｙｃｎｕｔｎｒｄｃｉｎｒｅｒａｉｅｃｎｒｌｒｎｉｏｉｇｅｅｇｏｓｍｐｉｅｕｔｏ．ｏａｃｉｏＫｅｒ：ＨＶＡＣｓｓｅ；ＡＬＥＲＴｙｔｍ；ｃｎｒｉｅｎｔｒｙｗｏｄｓｙｔｍＯＮｓｓｅｅｔａｚｄｍｏｉｌｏ

艾顿Reman工程程序说明书

Receive an enhanced3-year total warranty on your transmission and clutch when you bundle a Standard or FLEX Reman transmission with an Advantage Series or EverTough clutch and Eaton-approved lubricant. Standard warranties apply on individual purchases of the transmission and clutch.Linehaul, VocationalBuild your Reman Bundle inThree Easy StepsStep 1: Select a RemanT ransmissionAn Eaton Reman transmission,whether Standard or FLEX, ismade with Genuine Eaton partsand more new parts than anordinary rebuild. Every unit isperformance tested to ensureEaton quality specifications.Step 2: Select an AdvantageSeries or EverT ough ClutchEaton’s Advantage Seriesclutches are made for the longhaul. They feature a 50K milestandard lubrication interval forlinehaul applications and comewith a standard 3-year unlimitedwarranty. EverTough clutchesoffer a unique combination ofdurability and support in anaftermarket clutch. All EverToughclutches are 100% new andoffer a standard two-yearunlimited mile warranty, whichis upgraded to three yearswhen bundled.Step 3: Fill with Eaton-Approved LubricantEaton’s PS-386 SyntheticT ransmission Fluid is designedspecifically to optimize perfor-mance in Eaton transmissions.PS-386 improves fuel economy,reduces friction and gear wear,and prolongs the life of your trans-mission. Eaton-approved PS-386 isa necessary component in theReman Bundle Program.Eaton Reman™ Transmission+Eaton Advantage™ SeriesOR EverT ough™ Clutch+Eaton-Approved Lubricant= 3-Y ear/Unlim ited-MileTrans m ission AND Clutch Warranty*Replace with only genuineEaton parts for performance,durability and warrantyassurance.•Eliminate cross-referencemistakes and get the rightpart the first time, every time.•Maintain your warranty withgenuine components.•Choose Eaton, and getlegendary Roadranger supportfor More Time On The Road.*Applies to applications in the U.S.& Canada only. Please refer to theRoadranger Warranty Guide (TCWY0900)for the latest warranty time and mileageofferings.Notes:•Excludes Lightning transmissions(FRLO models).S U P P O R TB AC K ED B YFor spec’ing or service assistance, call 1-800-826-HELP (4357) or visit /roadranger.In Mexico, call 001-800-826-4357. Roadranger: Eaton and trusted partners providing the best products and services in the industry, ensuring more time on the road.EatonVehicle Group13100 E. Michigan Ave.Galesburg, MI 49053 USA800-826-HELP (4357)/roadranger© 2022 EatonAll Rights Reserved. Printed in USA.APSL0300 0122Y ou must register toreceive the RemanBundle warranty.Complete form TCWY0760 onsecond page and follow thesubmission instructions,or complete form online atNote: Features and specifications listed inthis document are subject to change withoutnotice and represent the maximum capa-bilities of the software and products with alloptions installed. Although every attempthas been made to ensure the accuracy ofinformation contained within, Eaton makesno representation about the completeness,correctness or accuracy and assumes noresponsibility for any errors or omissions.Features and functionality may vary dependingon selected options.Eaton, Fuller, Roadranger, Solo, UltraShift andFuller Advantage are registered trademarks ofEaton. All trademarks, logos and copyrightsare those of their respective owners.Factory Reman Bundle Warranty/Clutch Installation Kit Bundle Warranty Roadranger Warranty Registration Form TCWY0760Use this form to activate additional one year warranty on:• Heavy-duty Standard Reman/FLEX Reman, Reman Glider Kit and EverT ough clutch (Factory Reman Bundle Warranty)• EverT ough clutch (Clutch Installation Kit Bundle Warranty)Registration for additional warranty must be completed/submitted within one year of retail sale of bundled products.Factory Reman Bundle Warranty Instructions:1. Purchase of heavy-duty Reman transmission, Advantage/EverT ough clutch and Eaton-approved synthetic lubricant is required to activate additional 1-year warranty on above items.2. Please enclose proof of purchase or repair order listing transmission, clutch and lubricant along with this form to activate the warranty.3. Coverage confirmation will be sent by USPS mail.4. Advantage clutch, UltraShift, UtraShift PLUS and Lightning transmissions (FRLO models) are not included in this program.Clutch Installation Kit Bundle Warranty Instructions:1. Purchase of EverT ough clutch and clutch installation kit is required to activate additional 1-year warranty.2. Please enclose proof of purchase or repair order listingclutch and installation kit along with this form to activate the warranty.3. Coverage confirmation will be sent by USPS mail.4. All genuine clutch installation kits qualify.5. Advantage and UltraShift clutches are not included.Step 1: Enter owner/dealer informationOwner:____________________________________________________________Address:__________________________________________________________City:______________________________________________________________State/Prov:________________________ Postal Code:_____________________Phone:____________________________________________________________Email:____________________________________________________________Step 2: Enter vehicle/component informationOEM __________________________________ Date-In-Service ________________________ Current Odometer _______________________ MI KM Chassis VIN (17 characters): _______________________________________________________________________________________________________________T ransmission Model: ___________________________________________________ T ransmission Serial: ________________________________________________Clutch Part No.: ______________________________________________________ _ Clutch Installation Kit Part No.: ______________________________________Clutch Serial Number/Build Date ___________________________________________________________________________________________________________Lube Brand and picture of Eaton logo on container (or invoice): _______________________________________________________________________________Vehicle vocation (choose one only)Linehaul Standard Duty Construction Pickup and Delivery Fire ServicesRescue VehicleRecreation VehicleT ransit Coach School Bus Severe Duty Off Highway Agriculture Heavy Haul Logging MiningOil FieldRefuseY ard T ractorInterCity BusStep 3: Mail, fax or email this completed form with proof of purchase to:Mail:EatonFax: Email: c/o 360 Services, Inc.1-734-591-7899 ****************************** 275 E. 12 Mile Rd.Madison Heights, MI 48071Dealer Code:______________________________________________________Dealer:____________________________________________________________Dealer Contact:_____________________________________________________Dealer Contact Email:______________________________________________Address:__________________________________________________________City:______________________________________________________________State/Prov:________________________ Postal Code:_____________________Phone:____________________________________________________________S U P P O R TB AC K ED B Y© 2019 Eaton TCWY0760 0719Check here for email confirmation of warranty submission (please ensure you enter your email address above).。

艾顿Moeller系列快速链接反向启动器产品参数手册说明书

Eaton 199123Eaton Moeller® series Rapid Link - Reversing starter, 6.6 A,Sensor input 4, Actuator output 2, 230/277 V AC, Ethernet IP, HANQ4/2, with manual override switchGeneral specificationsEaton Moeller® series Rapid LinkReversing starter199123120 mm270 mm220 mm1.83 kg IEC/EN 60947-4-2UL approvalCCCCERoHSUL 60947-4-2Assigned motor rating: for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm at 50 Hz or 1800 min at 60 Hz RAMO5-W422EIP-412RS1Product Name Catalog NumberProduct Length/Depth Product Height Product Width Product Weight CertificationsCatalog Notes Model CodeIs the panel builder's responsibility. The specifications for the switchgear must be observed.3 kW6.6 A (at 150 % Overload)480 V AC, 3-phase400 V AC, 3-phase10000 A0 VMeets the product standard's requirements.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Does not apply, since the entire switchgear needs to be evaluated.0 kW2.238 kWMeets the product standard's requirements.0 V-40 °CManual override switchKey switch position AUTOKey switch position HAND2 Actuator outputs Generation Change RA-SP to RASP5Configuration to Rockwell PLC for Rapid LinkGeneration Change RASP4 to RASP5Generation change from RA-SP to RASP 4.0Generation change from RA-MO to RAMO 4.0Generation change RAMO4 to RAMO5Rapid Link 5 - brochureDA-SW-USB Driver PC Cable DX-CBL-PC-1M5DA-SW-drivesConnect - InstallationshilfeDA-SW-USB Driver DX-COM-STICK3-KITDA-SW-drivesConnectDA-SW-Driver DX-CBL-PC-3M0DA-SW-drivesConnect - installation helpMaterial handling applications - airports, warehouses and intra-logistics ETN.RAMO5-W422EIP-412RS1.edzIL034092ZUramo5_v14.dwgramo5_v14.stpDA-DC-00004184.pdfDA-DC-00004525.pdfDA-DC-00003964.pdfDA-DC-00004523.pdfeaton-bus-adapter-rapidlink-speed-controller-dimensions-002.eps eaton-bus-adapter-rapidlink-reversing-starter-dimensions-002.eps eaton-bus-adapter-rapidlink-reversing-starter-dimensions-003.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-003.eps10.11 Short-circuit ratingRated operational power at AC-3, 380/400 V, 50 HzInput currentRated operational voltageRated conditional short-circuit current, type 1, 480 Y/277 V Rated control supply voltage (Us) at AC, 50 Hz - min10.4 Clearances and creepage distances10.12 Electromagnetic compatibility10.2.5 LiftingRated power at 575 V, 60 Hz, 3-phaseRated power at 460 V, 60 Hz, 3-phase10.2.3.1 Verification of thermal stability of enclosures Rated control supply voltage (Us) at DC - minAmbient storage temperature - minFitted with:Applikasjonsmerknader BrosjyrereCAD model Installeringsinstruksjoner mCAD model SertifiseringsrapporterTegningerTwo sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operationElectronic motor protectionThermo-clickThermistor monitoring PTCKey switch position OFF/RESETShort-circuit releaseOverload cycleAC-53aNumber of pilot lightsRated control supply voltage (Us) at AC, 50 Hz - max0 VSystem configuration typePhase-earthed AC supply systems are not permitted.AC voltageCenter-point earthed star network (TN-S network)10.8 Connections for external conductorsIs the panel builder's responsibility.Coordination class (IEC 60947-4-3)Class 1Rated conditional short-circuit current, type 1, 600 Y/347 V0 ARated conditional short-circuit current (Iq)10 kABraking voltage230/277 V AC -15 % / +10 %, Actuator for external motor brakeAmbient operating temperature - max55 °CRated operational power at AC-3, 220/230 V, 50 Hz0 kWClimatic proofingIn accordance with IEC/EN 50178< 95 %, no condensationFeaturesParameterization: FieldbusParameterization: drivesConnectParameterization: KeypadParameterization: drivesConnect mobile (App)Lifespan, electrical10,000,000 Operations (at AC-3)Number of command positions2Electrical connection type of main circuitPlug-in connectionElectrical connection type for auxiliary- and control-current circuit Plug-in connectionRated control supply voltage (Us) at DC - max0 V10.9.3 Impulse withstand voltageIs the panel builder's responsibility.Braking current≤ 0.6 A (max. 6 A for 120 ms), Actuator for external motor brakeAmbient operating temperature - min-10 °C10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.Current limitation0.3 - 6.6 A, motor, main circuitAdjustable, motor, main circuitCable length10 m, Radio interference level, maximum motor cable length10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.Mounting positionVerticalMains switch-on frequencyMaximum of one time every 60 secondsClassCLASS 10 A10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to beevaluated.10.9.4 Testing of enclosures made of insulating materialIs the panel builder's responsibility.10.3 Degree of protection of assembliesDoes not apply, since the entire switchgear needs to be evaluated.Electromagnetic compatibilityClass AVoltage typeDCProduct categoryMotor starterOverload release current setting - min0.3 ARated control voltage (Uc)24 V DC (-15 %/+20 %, external via AS-Interface® plug)230/277 V AC (external brake 50/60 Hz)Rated operational current (Ie)6.6 AAssigned motor power at 460/480 V, 60 Hz, 3-phase3 HPRated frequency - min47 HzNumber of auxiliary contacts (normally closed contacts)Rated conditional short-circuit current (Iq), type 2, 380 V, 400 V, 415 V0 APower consumption8 W10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effectsMeets the product standard's requirements.On-delay20 - 35 msLifespan, mechanical10,000,000 Operations (at AC-3)Rated operational current (Ie) at 150% overload6.6 AProtocolEtherNet/IPOverload release current setting - max6.6 A10.9.2 Power-frequency electric strengthIs the panel builder's responsibility.Overvoltage categoryIIIDegree of protectionIP65NEMA 12Rated frequency - max63 HzVibrationResistance: According to IEC/EN 60068-2-6Resistance: 57 Hz, Amplitude transition frequency on accelerationResistance: 6 Hz, Amplitude 0.15 mmResistance: 10 - 150 Hz, Oscillation frequencyRated operational power at 380/400 V, 50 Hz - max3 kWAmbient storage temperature - max70 °CShort-circuit protection (external output circuits)Type 1 coordination via the power bus' feeder unit, Main circuitRated control supply voltage (Us) at AC, 60 Hz - min0 V10.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.Rated impulse withstand voltage (Uimp)4000 VConnectionConnections pluggable in power sectionOff-delay20 - 35 ms10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.FunctionsFor actuation of motors with mechanical brakeExternal reset possibleTemperature compensated overload protectionOutput frequency50/60 HzMains voltage tolerance380 - 480 V (-15 %/+10 %, at 50/60 Hz)Rated conditional short-circuit current (Iq), type 2, 230 V0 ATypeReversing starter10.2.2 Corrosion resistanceMeets the product standard's requirements.Supply frequency50/60 Hz, fLN, Main circuit10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard's requirements.10.2.7 InscriptionsMeets the product standard's requirements.Rated control supply voltage (Us) at AC, 60 Hz - max0 VRated operational current (Ie) at AC-3, 380 V, 400 V, 415 V6.6 ARated operational power at 380/400 V, 50 Hz - min0.09 kWModelReversing starterNumber of auxiliary contacts (normally open contacts)2Shock resistance15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms, Half-sinusoidal shock 11 ms, 1000 shocks per shaftAltitudeEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Med enerett. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaMax. 1000 mAbove 1000 m with 1 % performance reduction per 100 m Max. 2000 m。

艾顿安全设计解决方案安装指南说明书

Quick installation user guideAn Eaton secure-by-design solutionComplies with rigorous cyber-security, process, requirements and testing standards Eaton Cyber Secured Monitoring is the right solution to connect your device without any compromise to security and availability. It can run either on a secured cloud or on your own local network. It enables services such as Remote Monitoring, Health Reports and early anomaly detection that help to mitigate downtime risk associated with the critical components (batteries, capacitors, FANs,…). Eaton Cyber Secured Monitoring runs in all the units that support the Gigabit Network Card. Wireless internet connection option available by using SIM card router to connect to the network card.Eaton Cyber Secured MonitoringThe IoT platform and cloud solution is ISO IEC 27001 and carrier security certiﬁed, provided by the market leader in EuropeThe Gigabit Network Card is theindustry ﬁrst to receive IEC 62443-4-2 and UL 29001-1 certiﬁcationsPurpose of the documentThe document serves the purpose of supporting the correct configuration of the gigabit network card and connecting the UPS to the Eaton remote service support.Points of contactIn case of technical issues, questions or any inquiries, please feel free to contact your local service team, according to your area from our website:/powerquality.You can select your country as shown in the picture below:1. Worldwide Sites2. Customer SupportMy Account | Logout?Customer Support USA | Worldwide Sites | 21RequirementsThe remote monitoring needs the below gear for starting the set-up:1. A UPS from the table listed below (offering this service).2. A gigabit network card (network -M2) with a firmware revision >1.7.11 - RMS (Solution not available for firmware >2.0.5).3. Firewall allowing outbound TCP 443 port (protocol used is MQTT over TLS).Customer detailsWe recommend fulfilling the fields in the below image in order to retrieve your unit location:• Location of the unit (to be filled following this requirement City - Country)• Contact• System name( Name given to the UPS to be identified on the cloud dashboard)Route: Setting (on the top right) » General tab » Detailsote: N P lease ensure that the card is configured to your local network requirements. Remember to checkthe manual of the card for detailed instructions.Connecting the card to the cloudPlease follow the below steps for connecting the card to the cloud:1. Access the protocol tab in the settings menu.2. Check the box Enable in the Remote Monitoring window. A proxy can block the communicationbetween the card and the cloud. If you have one, enter the proxy address into the field.ote: NA dvanced settings must not be changed unless advised by Eaton Support team.213. Press Save. The status should turn to: “pending approval”4. When you receive the ‘’pending approval’’ status, the UPS is waiting the activation into the cloud.4.1 I n case you purchased a Connected Warranty+1 or Connected Warranty+3, at this stage, if notdone yet, please proceed to the activation of your service online according to the instructions you received. Following this registration, your Eaton service team will enable your UPS on the cloud.4.2 I n case of service contract (Standard +, Advanced +, Premium or Flex), your Eaton service teamwill take in charge the registration of your UPS into the cloud and activate the monitoring service.5. When the activation is completed by Eaton service team, the status on the card will become greenindicating: “connected”, after showing a disclaimer window (as seen below). This step can take time.No need to stay in front of your screen. You can come back hour’s later to check.6. ‘’CONNECTED’’ indicates that your UPS is now under the supervision of our Eaton support team andwill be monitored.7. Connect to https:/// with the credentials from the service team, to login andview the details of your UPS under monitoring on your account.8. The Eaton support team will contact you in case specific actions are required from your end.。

霍尼韦尔BACtalk艾顿楼宇自控系统设计方案书

霍尼韦尔BACtalk艾顿楼宇自控系统设计方案书Honeywell 楼宇自控系统设计方案二〇二二年四月二十七日目录1前言 (6)2需求分析 (6)2.1项目概述 (6)2.2系统优势与特点 (7)3系统设置总则 (11)3.1楼宇自动化机电设备监控系统的设计目标 11 3.2系统设计依据 (11)3.3系统设计原则 (12)4系统监控范围 (13)5Envision for BACtalk系统概述 (14)5.1Envision for BACtalk系统结构 (16)5.2中央图形操作站 (17)5.3控制器 (18)5.3.1全局控制器（BCM）： (18)5.3.2大型控制器（VLX）： (21)5.3.3中小型控制器（VLCs）： (23)5.3.4V A V控制器（V A Vi-SD）： (35)5.4传感器及执行器 (37)6系统设计方案说明 (38)6.1总线型结构及开放的网络协议- - BACnet.. 39 6.2楼宇自动化系统的配置及控制功能 (40)6.2.1冷冻站系统监控 (40)6.2.2热源系统监控 (43)6.2.3空气处理系统监控 (44)6.2.4给排水系统监控 (49)6.2.5供配电系统监控 (51)6.2.6照明系统监控 (52)6.2.7电梯系统运行监视 (53)6.2.8与第三厂商设备及其他系统的通信 (53)6.3BA系统节能控制 (53)7系统软件功能及特性 (56)7.1软件功能 (57)7.2系统软件特性 (58)8系统调试、验收及维护 (59)8.1系统调试 (59)8.2完工验收 (60)8.3资料提交 (60)8.4维护和保修 (61)1前言随着科技的不断发展和进步，现代化的建筑物迅速崛起及发展，已成为国民经济迅速增长的必然条件。

而现代化建筑物的大型化、智能化和多功能化，必然导致建筑物内机电设备种类繁多，技术性能复杂，维修服务保养项目的不断增加，管理工作已非人工所能应付。

艾顿电气设备快速参考指南说明书

Eaton1000 Eaton Boulevard Cleveland, OH 44122 United States Electrical Sector Canadian Operations 5050 Mainway Burlington, ON L7L 5Z1 Canada EatonCanada.ca© 2013 EatonAll Rights Reserved Printed in USAZ13729August 2013Eaton is a registered trademark. All other trademarks are property of their respective owners.Switchboard vs. switchgearCharacteristic Switchboard SwitchgearStandards CSA T C22.2 No. 31CSA C22.2 No. 31CSA C22.2 No. 244, harmonized with UL T 891ANSI C37.20.1Circuit protection Fusible switches, moulded-case circuit breakeror power circuit breakers (fixed or drawout)Power circuit breakers (fixed or drawout)Device mounting Typically group mounted Individually mountedBreaker features Breakers are factory sealed Built for field maintenance, modification and inspectionInternal accessories factory mounted Accessory can be field mountedBreaker accessories can be field installed Maximum selective coordinationShort-time rating See breaker specifications Short-time 30-cycle withstand ratings up to 85 kA(better selective coordination)Production testing Two production tests: dielectric voltage-withstandand ground fault protection Seven production tests: dielectric, grounding of instrument transformer case, electrical operation and control wiring, control-wiring continuity, polarity verification, sequence and optional control-wiring dielectricService conditions Service conditions are not addressed Ambient air temperatures and altitude specifiedDerating factors are given for operating in varying altitudes Temperature tests Tests are not required for copper if bus density is 1000Aper square-inch, or for aluminum if bus density is 750A persquare-inchRequired for all bus ratingsShort-time withstand current test Determined by testing at 600V for three cycles at 60 Hz Determined by testing at 635V for four cycles at 60 Hz Short-circuit bus testing Phase to neutral only required under certain conditionsand phase to ground not requiredRequires phase to neutral and phase to groundBarriers Optional internal barriers Optional barriers between breakers and bus and betweenbreakers themselvesEnclosure structure Requires indoor paint finish to pass 24-hour salt spray test Requires indoor paint finish to pass 200-hour salt spray testOutdoor paint finish must pass 600-hour test Outdoor paint finish must pass 600-hour testAccess Front or rear access Front and rear accessCovers Standard bolted front cover (feeders only)Hinged front covers。

霍尼韦尔防盗报警安装编程整理说明

霍尼韦尔报警系统资料说明主机信息雨ldVG. ■&的亍《MV ・i 低从■就虻兼噩大如. -鹿有的・曲培门覺列功串用料・、接线图 1、236 plus II JP1isieai JP ?»tr 訂尸pKSMMJPUmaIl 屯►AU.-氐厂"ITar l吨E-v・<匸$L -l 土■.««-警吿：平正聡的圭栽可鲍橫町主坏歸*头T II HJ1JJX3网AC AC faWiAUX VJNQ MhLX* AuK ALiX KE#•对hfO OATAahQHR D 劃”臼 ZhM J!J MI S•如果回馬设定为EO 咸19曲回気侨有回腐初須跑2KH 电甩.供电电源识鏡便用12VDC. 6.5AH 或4.0AH 密封铅■■电池.•毎3~舛用3!号12663£124«电池團I ••■益鞘助电4L ■号序的供电总需求不1S 过主机量大功札 •交压•安转在不带开关的交渣电*»塞上■ ・更扶保险管前要斷开交涼电漫和.电池.•电M 大东电电潦为360M.注資请勿对带电操f12 VDC 6.5 AH 12 VDC 4.0 AH铅酸蓄电池-O 公共揍地点作力场火上机佼疋时•必句適过电派临控検夬(Syz Sensor A77T16系列)•使用4统制烟傅探测*(Sentrol 41SSH49C).探溥為息耗电不得冈过800出・Al X 及KEY+划口的鸟电渝不超过400mA主4-千二生「爲比b.吧丄一■/琴曲E-畐曲曾『m _7-ita c」+ 遏.*叢二一7药■7一壬-.■:;--次■■■■」 q ・t 汛士⑺• •• •• •• • • •• •-1-E XUZJUSn_d9o0ci供电电源•只能便川IZVOC. 6・5AH 或4. OAII^H«1® »电池。

•得3、5年用型号12bb 或124U 莒也池更換••钳乩辎助山如警号智I ：门!总需求不趨过4机圾人功轧 •变斥器农装Q •不帯卄关的交涼电源捕率h.•更换保险符I 『委断开交涼电源和裕电范.-?AC ・。

艾顿Moeller系列xPole - PF6 7RCCB技术参数数据手册说明书

Eaton 165783Eaton Moeller series xPole - PF6/7 RCCB. PF6, 4 pole, In: 63 A, Icn: 6 kA, I?N: 0.1 A, Type G/A (�VE E 8601), Pulse-current sensitive, Surge-proof, 3 kA, residential and commercialGeneral specificationsEaton Moeller series xPole - PF6/7 RCCB165783401508162303780 mm 71 mm 70 mm 0.32 kg RoHS conformIEC/EN 61008 ÖVE E 8601PF6-63/4/01-G/AProduct NameCatalog Number EANProduct Length/Depth Product Height Product Width Product Weight Compliances Certifications Model CodeFour-poleShort time-delayed63 A6 kA100 mAPulse-current sensitive Surge-proof, 3 kA 230 V AC / 400 V AC400 V440 V4 kV0.1 A0.1 A50 Hz63 A (max. admissible back-up fuse) A630 A40 A gG/gL6 kA0.25 kA184 V AC - 440 V AC24000 operationsApplicationNumber of polesTripping timeAmperage RatingRated short-circuit strength Fault current rating Sensitivity typeImpulse withstand current Type Voltage ratingRated operational voltage (Ue) - maxRated insulation voltage (Ui)Rated impulse withstand voltage (Uimp) Rated fault current - minRated fault current - maxFrequency ratingShort-circuit ratingLeakage current typeRated residual making and breaking capacity Admissible back-up fuse overload - max Rated short-time withstand current (Icw) Surge current capacityTest circuit rangePollution degreeLifespan, electricalResidual current circuit breaker for residential and commercial applications xPole - Switchgear for residential and commercial applicationsPF6Residual current circuit breakersType G/A (ÖVE E 8601)45 mm470 mm (4 SU)69.5 mmDIN railQuick attachment with 2 latch positions for DIN-rail IEC/EN 60715IP20IP20, IP40 with suitable enclosureOpen mouthed/lift terminals1.5 mm² - 35 mm²1.5 mm²35 mm²16 mm² (2x)1.5 mm²16 mm²Finger and hand touch safe, DGUV VS3, EN 502740.8 mm - 2 mm20000 operations-35 °C 63 A0 W10.5 W0 W0 W-25 °C60 °CMeets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.FrameWidth in number of modular spacingsBuilt-in width (number of units)Built-in depthMounting MethodDegree of protectionTerminals (top and bottom)Terminal capacity (solid wire)Connectable conductor cross section (solid-core) - min Connectable conductor cross section (solid-core) - max Terminal capacity (stranded cable)Connectable conductor cross section (multi-wired) - min Connectable conductor cross section (multi-wired) - max Terminal protectionBusbar material thicknessLifespan, mechanicalPermitted storage and transport temperature - min Rated operational current for specified heat dissipation (In) Heat dissipation per pole, current-dependentEquipment heat dissipation, current-dependentStatic heat dissipation, non-current-dependentHeat dissipation capacityAmbient operating temperature - minAmbient operating temperature - max10.2.2 Corrosion resistance10.2.3.1 Verification of thermal stability of enclosures10.2.3.2 Verification of resistance of insulating materials to normal heat10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects10.2.4 Resistance to ultra-violet (UV) radiation10.2.5 Lifting10.2.6 Mechanical impact10.2.7 Inscriptions60 °C25-55 °C / 90-95% relative humidity according to IEC 60068-2Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Is the panel builder's responsibility. The specifications for the switchgear must be observed.The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.Z-HK 248432eaton-rcd-application-guide-br019003en-en-us.pdfPermitted storage and transport temperature - max Climatic proofing10.3 Degree of protection of assemblies10.4 Clearances and creepage distances 10.5 Protection against electric shock10.6 Incorporation of switching devices and components 10.7 Internal electrical circuits and connections 10.8 Connections for external conductors 10.9.2 Power-frequency electric strength 10.9.3 Impulse withstand voltage 10.9.4 Testing of enclosures made of insulating material 10.10 Temperature rise10.11 Short-circuit rating10.12 Electromagnetic compatibility10.13 Mechanical functionAccessories required Application notesEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All rights reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaAdditional equipment possibleResidual current circuit breakerIS/SPE-1TE 101911Interlocking deviceShort-time delayed trippingPF6Residual current circuit breakersKLV-TC-4 276241 (Compact enclosure)Z-FW/LP 248296 (Remote control and automatic switching device)Z-RC/AK-4TE 101062 (sealing cover set)Type G/A (ÖVE E 8601)eaton-xpole-pf7-rccb-catalog-ca019032en-en-us.pdf eaton-xpole-pf6-rccb-catalog-ca019034en-en-us.pdfDA-DC-03_PF6eaton-circuit-breaker-xeffect-frcmm-rccb-dimensions.jpg eaton-xpole-pf6/7-rccb-3d-drawing.jpgIL019140ZUeaton-xeffect-frcmm-rccb-wiring-diagram-002.jpgFeaturesFitted with: Functions Special featuresUsed with Catalogues Certification reports DrawingsInstallation instructions Wiring diagramsMaximum operating temperature is 60 °C: Starting at 40 °C, the max. permissible continuous current decreases by 1.8% for every 1 °CTripping signal contact for subsequent installation Z-NHK 248434。

艾顿Moeller系列Rapid Link速控器产品说明书

Eaton 198797Eaton Moeller® series Rapid Link - Speed controllers, 5.6 A, 2.2 kW, Sensor input 4, 180/207 V DC, AS-Interface®, S-7.4 for 31 modules, HAN Q5, with braking resistanceGeneral specificationsEaton Moeller® series Rapid Link Speed controller1987974015081968558157 mm 270 mm 220 mm 3.42 kg UL approval IEC/EN 61800-5-1 RoHS CE UL 61800-5-1Product NameCatalog NumberEANProduct Length/Depth Product Height Product Width Product Weight Certifications Catalog Notes can be switched over from U/f to (vector) speed control Connection of supply voltage via adapter cable on round or flexible busbar junction Diagnostics and reset on device and via AS-Interface Four fixed speeds integrated PTC thermistorParameterization: KeypadParameterization: FieldbusDiagnostics and reset on device and via AS-Interface Parameterization: drivesConnect mobile (App) Parameterization: drivesConnectInternal DC linkPC connectionKey switch position AUTOKey switch position HANDTwo sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operationThermo-click with safe isolationBreaking resistanceFour fixed speedsControl unitIGBT inverterSelector switch (Positions: REV - OFF - FWD)Key switch position OFF/RESETPTC thermistor monitoringBraking resistanceFor actuation of motors with mechanical brakeBrake chopper with braking resistance for dynamic braking4-quadrant operation possible IP65NEMA 121st and 2nd environments (according to EN 61800-3)IIISpeed controllerAS-Interface profile cable: S-7.4 for 31 modulesASIC1: for conducted emissions onlyC2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.2000 VAC voltageCenter-point earthed star network (TN-S network)Phase-earthed AC supply systems are not permitted.Vertical15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms, Half-sinusoidal shock 11 ms, 1000 shocks per shaftResistance: 6 Hz, Amplitude 0.15 mmResistance: According to IEC/EN 60068-2-6Resistance: 57 Hz, Amplitude transition frequency on accelerationResistance: 10 - 150 Hz, Oscillation frequency Above 1000 m with 1 % performance reduction per 100 m Max. 2000 m-10 °C40 °C-40 °C70 °CFeatures Fitted with:Functions Degree of protectionElectromagnetic compatibility Overvoltage categoryProduct categoryProtocolRadio interference classRated impulse withstand voltage (Uimp) System configuration typeMounting position Shock resistance Vibration AltitudeAmbient operating temperature - min Ambient operating temperature - max Ambient storage temperature - min Ambient storage temperature - max< 95 %, no condensation In accordance with IEC/EN 501780.5 - 5.6 A, motor, main circuit Adjustable, motor, main circuit < 10 ms, Off-delay < 10 ms, On-delay 98 % (η)5.3 A3.5 mA120 %Maximum of one time every 60 seconds 380 V480 V380 - 480 V (-10 %/+10 %, at 50/60 Hz)Synchronous reluctance motors Sensorless vector control (SLV) U/f control BLDC motors PM and LSPM motors 0 Hz500 HzAt 40 °CFor 60 s every 600 s8.4 AClimatic proofingCurrent limitationDelay timeEfficiency Input current ILN at 150% overload Leakage current at ground IPE - max Mains current distortion Mains switch-on frequencyMains voltage - min Mains voltage - max Mains voltage toleranceOperating modeOutput frequency - min Output frequency - max Overload current Overload current IL at 150% overload45 Hz66 Hz2.2 kW480 V AC, 3-phase 400 V AC, 3-phase 0.1 Hz (Frequency resolution, setpoint value)200 %, IH, max. starting current (High Overload), For 2 seconds every 20 seconds, Power section 50/60 Hz8 kHz, 4 - 32 kHz adjustable, fPWM, Power section, Main circuit AC voltageCenter-point earthed star network (TN-S network) Phase-earthed AC supply systems are not permitted.3 HP≤ 0.6 A (max. 6 A for 120 ms), Actuator for external motor brake Adjustable to 100 % (I/Ie), DC - Main circuit ≤ 30 % (I/Ie)280/207 V DC -15 % / +10 %, Actuator for external motor brake 765 VDC10 kAType 1 coordination via the power bus' feeder unit, Main circuit24 V DC (-15 %/+20 %, external via AS-Interface® plug) 180/207 V DC (external brake 50/60 Hz)AS-Interface Plug type: HAN Q5Number of slave addresses: 31 (AS-Interface®)Max. total power consumption from AS-Interface® power supply unit (30 V): 190 mASpecification: S-7.4 (AS-Interface®)Rated frequency - min Rated frequency - max Rated operational power at 380/400 V, 50 Hz, 3-phase Rated operational voltage ResolutionStarting current - maxSupply frequency Switching frequencySystem configuration type Assigned motor power at 460/480 V, 60 Hz, 3-phase Braking currentBraking torqueBraking voltageSwitch-on threshold for the braking transistor Rated conditional short-circuit current (Iq)Short-circuit protection (external output circuits)Rated control voltage (Uc)Communication interface Connection InterfacesC3 ≤ 25 m, maximum motor cable length C2 ≤ 5 m, maximum motor cable length C1 ≤ 1 m, maximum motor cable length Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Cable length10.2.2 Corrosion resistance10.2.3.1 Verification of thermal stability of enclosures10.2.3.2 Verification of resistance of insulating materials tonormal heat10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internalelect. effects10.2.4 Resistance to ultra-violet (UV) radiation10.2.5 Lifting10.2.6 Mechanical impact10.2.7 Inscriptions10.3 Degree of protection of assemblies10.4 Clearances and creepage distances10.5 Protection against electric shock10.6 Incorporation of switching devices and components10.7 Internal electrical circuits and connections10.8 Connections for external conductors10.9.2 Power-frequency electric strength10.9.3 Impulse withstand voltageIs the panel builder's responsibility.The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Is the panel builder's responsibility. The specifications for the switchgear must be observed.The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.Rapid Link 5 - brochureDA-SW-USB Driver PC Cable DX-CBL-PC-1M5DA-SW-drivesConnect - InstallationshilfeDA-SW-drivesConnectDA-SW-USB Driver DX-COM-STICK3-KITDA-SW-drivesConnect - installation helpDA-SW-Driver DX-CBL-PC-3M0Material handling applications - airports, warehouses and intra-logisticseaton-bus-adapter-rapidlink-speed-controller-dimensions-002.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-004.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions.epseaton-bus-adapter-rapidlink-speed-controller-dimensions-003.eps ETN.RASP5-5401A31-5120100S1.edzIL034085ZUramo5_v19.dwgrasp5_v19.stpGeneration Change RASP4 to RASP5Generation Change RA-SP to RASP5Generation change from RA-SP to RASP 4.0Generation change from RA-MO to RAMO 4.0Generation change RAMO4 to RAMO5Configuration to Rockwell PLC for Rapid LinkDA-DC-00004514.pdfDA-DC-00003964.pdfDA-DC-00004184.pdfDA-DC-00004508.pdf10.9.4 Testing of enclosures made of insulating material10.10 Temperature rise10.11 Short-circuit rating10.12 Electromagnetic compatibility 10.13 Mechanical function BrochureDisegnieCAD modelIstruzioni di installazione mCAD modelNote per l'applicazione Report di certificazioneEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Tutti i diritti riservati. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia。

艾顿Managed Rack PDU EMAB03用户手册说明书

Eaton EMAB03Eaton Managed Rack PDU, 0U, 26U, Input C14, 2.3 kW max, 10A, 200-240V, Outlets 16XC13General specificationsEaton Managed Rack PDU EMAB0335533406970121150 mm52 mm 53 mm5 kg 2 yearCE Marked RoHS Compliant EAC IEC 60950-1IEC 61000-6-2IEC 61000-6-4EPDU MA 0U (C14 10A 1P)16XC13Product Name Catalog NumberEAN Product Length/DepthProduct Height Product WidthProduct Weight WarrantyCompliances CertificationsModel Code16Single-phaseConnecting cord with plugMetric2.3 kW max0U (Vertical)Vertical10AC14Ampere Meter Mounting material Display50/60 HzAt distance0° to 60°C (32° to 140°F)Eaton UPS Services Quick Guide 2021Eaton UPS and battery servicesEaton ePDU G3 - BrochureEU Declaration of Conformity Eaton ePDUs G3 Drawing EMAB03Eaton ePDU G3 - Installation and Connectivity Quick StartNumber of Outputs C13PhaseElectrical connectionMounting dimension (standardized) WattageForm factorMounting directionAmperage RatingPackage contentsInput connectionFitted with:Frequency ratingEvaluationOperating Temperature BrochuresCompliance information DrawingsManuals and user guidesRack PDUMounting accessories Network cable Configuration cable Splitter for daisy-chaining Quickstart guideSafety InstructionsEthernet interfaceYesNumber of outlets with earth pin16Mass configurationYesCommunicationHTTP, HTTPS, SSL, Telnet, FTP, SNMP, SMTP, DNS, DHCP, LDAP, RADIUSSpecial featuresRemote Site ManagementTurn off unused outlets tocontrol commissioningPhase Metering, CircuitBreaker Current Meteringand Input MeteringCircuit Breaker StatusMonitoringLevel 3 PUE measurementsOutlet and IT EquipmentSwitching/reboot/sequencing across A and Bfeed in Daisy-ChainSequence Outlets to avoidin-rush current, to ensureequipment starts in correctorderHighly secure with useraccess control, passwordprotection and SSLconfigurable to 1024 or 2048bitHot-Swap Control modulewith advanced LCDOptionalTemperature/HumiditysensorBuilt-in IEC outlet eGripretention, retains allstandard IEC plugsBuilt-in outlet P-lock system,locking mechanism with P-lock power cordsOutlet controlYesEaton Corporation plcEaton House30 Pembroke RoadDublin 4, Ireland © 2023 Eaton. All rights reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia Yes3m200-240VBlackYesAluminium2(16) C13Rack PDUYes52SwitchableCord lengthInput voltageColorSNMPMaterialOver voltage categoryOutletsTypeSerial interfaceMounting Dimension (metrical)。

艾顿Moeller系列Rapid Link速控器参数说明说明书

Eaton 198732Eaton Moeller® series Rapid Link - Speed controllers, 2.4 A, 0.75 kW, Sensor input 4, AS-Interface®, S-7.4 for 31 modules, HAN Q4/2, with braking resistanceGeneral specificationsEaton Moeller® series Rapid Link Speed controller198732157 mm270 mm 220 mm 3.42 kgIEC/EN 61800-5-1 CE UL approval RoHS UL 61800-5-1RASP5-2400A31-4120100S1Product NameCatalog NumberProduct Length/Depth Product Height Product Width Product Weight Certifications Catalog Notes Model Codecan be switched over from U/f to (vector) speed control Connection of supply voltage via adapter cable on round or flexible busbar junction Diagnostics and reset on device and via AS-Interface480 VIs the panel builder's responsibility. The specifications for the switchgear must be observed.400 V AC, 3-phase480 V AC, 3-phaseMeets the product standard's requirements.0.75 kW500 VMeets the product standard's requirements.-40 °C380 VBreaking resistanceSelector switch (Positions: REV - OFF - FWD)Thermo-click with safe isolationBraking resistanceInternal DC linkIGBT inverterKey switch position AUTOKey switch position HANDKey switch position OFF/RESETTwo sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operationControl unitPTC thermistor monitoringPC connectionFour fixed speeds0 Hz Generation change from RA-MO to RAMO 4.0Generation change from RA-SP to RASP 4.0Configuration to Rockwell PLC for Rapid LinkGeneration change RAMO4 to RAMO5Generation Change RA-SP to RASP5Generation Change RASP4 to RASP5Rapid Link 5 - brochureDA-SW-USB Driver DX-COM-STICK3-KITDA-SW-drivesConnect - installation helpDA-SW-Driver DX-CBL-PC-3M0DA-SW-USB Driver PC Cable DX-CBL-PC-1M5DA-SW-drivesConnect - InstallationshilfeDA-SW-drivesConnectMaterial handling applications - airports, warehouses and intra-logistics ETN.RASP5-2400A31-4120100S1.edzIL034085ZUrasp5_v23.stpramo5_v23.dwgDA-DC-00004184.pdfDA-DC-00004514.pdfDA-DC-00004508.pdfDA-DC-00003964.pdfeaton-bus-adapter-rapidlink-speed-controller-dimensions-002.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-004.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions.epseaton-bus-adapter-rapidlink-speed-controller-dimensions-003.epsMains voltage - max10.11 Short-circuit ratingRated operational voltage10.4 Clearances and creepage distancesOutput at quadratic load at rated output voltage - max Output voltage - max10.2.3.1 Verification of thermal stability of enclosures Ambient storage temperature - minMains voltage - minFitted with:Output frequency - minStarting current - max Applikasjonsmerknader BrosjyrereCAD model Installeringsinstruksjoner mCAD model SertifiseringsrapporterTegninger200 %, IH, max. starting current (High Overload), For 2 seconds every 20 seconds, Power sectionRated conditional short-circuit current (Iq)10 kAAmbient operating temperature - max40 °CCommunication interfaceAS-InterfaceAssigned motor power at 115/120 V, 60 Hz, 1-phase1 HPOutput frequency - max500 HzSwitching frequency8 kHz, 4 - 32 kHz adjustable, fPWM, Power section, Main circuitFeaturesParameterization: KeypadParameterization: drivesConnectParameterization: FieldbusDiagnostics and reset on device and via AS-Interface Parameterization: drivesConnect mobile (App)Ambient operating temperature - min-10 °CBraking current≤ 0.6 A (max. 6 A for 120 ms), Actuator for external motor brakeNumber of HW-interfaces (serial TTY)10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.Nominal output current I2N2.4 A10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.10.3 Degree of protection of assembliesDoes not apply, since the entire switchgear needs to be evaluated.Product categorySpeed controllerRadio interference classC1: for conducted emissions onlyC2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.Heat dissipation capacity Pdiss0 WRated control voltage (Uc)24 V DC (-15 %/+20 %, external via AS-Interface® plug)Assigned motor power at 460/480 V, 60 Hz, 3-phase1 HPNumber of HW-interfaces (RS-422)Mains current distortion120 %ProtocolASIAS-Interface profile cable: S-7.4 for 31 modules10.9.2 Power-frequency electric strengthIs the panel builder's responsibility.Overvoltage categoryIIIDegree of protectionNEMA 12IP65Ambient storage temperature - max70 °CRated impulse withstand voltage (Uimp)2000 VConnectionPlug type: HAN Q4/2Overload currentFor 60 s every 600 sAt 40 °CFunctions4-quadrant operation possibleBrake chopper with braking resistance for dynamic brakingOutput at linear load at rated output voltage - max0.75 kWMains voltage tolerance380 - 480 V (-10 %/+10 %, at 50/60 Hz)Leakage current at ground IPE - max3.5 mAConverter typeU converter10.2.2 Corrosion resistanceMeets the product standard's requirements.Supply frequency50/60 Hz10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard's requirements.10.2.7 InscriptionsMeets the product standard's requirements.Shock resistance15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms, Half-sinusoidal shock 11 ms, 1000 shocks per shaftApplication in domestic and commercial area permittedYesNumber of inputs (analog)Number of phases (output)310.12 Electromagnetic compatibilityIs the panel builder's responsibility. The specifications for the switchgear must be observed.10.2.5 LiftingDoes not apply, since the entire switchgear needs to be evaluated.Number of HW-interfaces (RS-485)1Number of HW-interfaces (industrial ethernet)Efficiency97 % (η)System configuration typeAC voltageCenter-point earthed star network (TN-S network)Phase-earthed AC supply systems are not permitted.10.8 Connections for external conductorsIs the panel builder's responsibility.Switch-on threshold for the braking transistor765 VDCProtectionFinger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)Application in industrial area permittedYesClimatic proofingIn accordance with IEC/EN 50178< 95 %, no condensation10.9.3 Impulse withstand voltageIs the panel builder's responsibility.Overload current IL at 150% overload3.6 AInput current ILN at 150% overload2.5 ANumber of HW-interfaces (RS-232)Number of inputs (digital)4Current limitationAdjustable, motor, main circuit0.2 - 2.4 A, motor, main circuitCable lengthC2 ≤ 5 m, maximum motor cable lengthC1 ≤ 1 m, maximum motor cable lengthC3 ≤ 25 m, maximum motor cable length10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.Mounting positionVerticalMains switch-on frequencyMaximum of one time every 60 seconds10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.9.4 Testing of enclosures made of insulating materialIs the panel builder's responsibility.Heat dissipation per pole, current-dependent Pvid0 WElectromagnetic compatibility1st and 2nd environments (according to EN 61800-3)Resolution0.1 Hz (Frequency resolution, setpoint value)Assigned motor power at 460/480 V, 60 Hz1 HPRelative symmetric net voltage tolerance10 %Rated operational current (Ie)2.4 A at 150% overload (at an operating frequency of 8 kHz and an ambient air temperature of +40 °C)Number of outputs (analog)Rated operational power at 380/400 V, 50 Hz, 3-phase0.75 kWNumber of HW-interfaces (USB)Operating modeSensorless vector control (SLV)U/f controlBLDC motorsSynchronous reluctance motorsPM and LSPM motorsRated frequency - min45 HzDelay time< 10 ms, Off-delay< 10 ms, On-delayNumber of outputs (digital)Power consumption32 W10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effectsMeets the product standard's requirements.Number of HW-interfaces (other)1Rated frequency - max66 HzVibrationResistance: 57 Hz, Amplitude transition frequency on accelerationResistance: 6 Hz, Amplitude 0.15 mmResistance: According to IEC/EN 60068-2-6Resistance: 10 - 150 Hz, Oscillation frequencyShort-circuit protection (external output circuits)Type 1 coordination via the power bus' feeder unit, Main circuit10.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.Braking torqueAdjustable to 100 % (I/Ie), DC - Main circuitRelative symmetric net frequency tolerance10 %10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Number of HW-interfaces (parallel)Assigned motor power at 230/240 V, 60 Hz, 1-phase1 HPInterfacesSpecification: S-7.4 (AS-Interface®)Number of slave addresses: 31 (AS-Interface®)Max. total power consumption from AS-Interface® power supply unit (30 V): 190 mANumber of phases (input)Eaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Med enerett.Eaton is a registered trademark.All other trademarks are property of their respectiveowners./socialmedia327.5 W at 50% current and 90% speed 31.8 W at 100% current and 90% speed 33.5 W at 25% current and 50% speed 34.6 W at 50% current and 50% speed 35.1 W at 25% current and 0% speed 36.6 W at 100% current and 50% speed 36.8 W at 50% current and 0% speed 40.7 W at 100% current and 0% speed 0Max. 2000 mAbove 1000 m with 1 % performance reduction per 100 mHeat dissipation at current/speed Number of interfaces (PROFINET)Altitude。