maya7菜单中英文对照
Maya菜单中英文对照表
Maya菜单中英文对照表Curves创建曲线CV Curve Tool CV曲线工具EP Curve Tool EP曲线工具Pencil Curve Tool笔曲线工具Add Points Tool加点工具Curve Editing Tool曲线编辑工具Offset Curve曲线移动Offset Curve On Surface曲线在表面移动Project Tangent曲线切线调整Fillet Curve带状曲线Rebuild Curve重建曲线Extend Curve扩展曲线Insert Knot插入节点Attach Curves连接曲线Detach Curves断开曲线Align Curves对齐曲线Open/Close Curves打开/关闭曲线Reserse Curves反转曲线Duplicate Curves复制曲线CV Hardness硬化曲线Fit B-spline适配贝塔曲线Surfaces曲面Bevel斜角Extrude凸出Loft放样Planar曲面Revolve旋转Boundary边界Birail 1 Tool二对一工具Birail 2 Tool二对二工具Birail 3+ Tool二对三工具Circular Fillet圆边斜角Freeform Fillet自由形斜角Fillet Blend Tool斜角融合工具Edit Surfaces编辑曲面Intersect Surfaces曲面交叉Project Curve投影曲线Trim Tool修整曲线工具Untrim Surfaces撤消修整Rebuild Surfaces重建曲面Prepare For Stitch准备缝合Stitch Surface Points点缝合曲面Stitch Tool缝合工具NURBS to Polygons NURBS转化为多边形Insert Isoparms添加元素Attach Surfaces曲面结合Detach Surfaces曲面分离Align Surfaces曲面对齐Open/Close Surfaces打开/关闭曲面Reverse Surfaces反转曲面Polygones多边形Create Polygon Tool创建多边形工具Append to Polygon Tool追加多边形Split Polygon Tool分离多边形工具Move Component移动元素Subdivide多边形细化Collapse面转点Edges边界Soften/Harden柔化/硬化Close Border关闭边界Merge Tool合并工具Bevel斜角Delete and Clean删除和清除Facets面Keep Facets Together保留边线Extrude凸出Extract破碎Duplicate复制Triangulate三角分裂Quadrangulate四边形合并Trim Facet Tool面修整工具Normals法向Reverse倒转法向Propagate传播法向Conform统一法向Texture质地Assign Shader to Each Projection指定投影Planar Mapping平面贴图Cylindrical Mapping圆柱体贴图Spherical Mapping球体贴图Delete Mapping删除贴图Cut Texture裁剪纹理Sew Texture斜拉纹理Unite联合Separate分离Smooth光滑Selection Constraints选定限定工具Smart Command Settings改变显示属性Convert Selection转化选定Uninstall Current Settins解除当前设定Animation动画模块Keys关键帧Settings设置关键帧Auto Key自动设置关键帧Spline样条曲线式Linear直线式Clamped夹具式Stepped台阶式Flat平坦式Other其他形式Set Driven Key设置驱动关键帧Set设置Go To Previous前移Go To Next后退Set Key设置帧Hold Current Keys保留当前帧Paths路径Set Path Key设置路径关键帧Attach to Path指定路径Flow Path Object物体跟随路径Skeletons骨骼Joint Tool关节工具IK Handle Tool反向动力学句柄工具IK Spline Handle Tool反向动力学样条曲线句柄工具Insert Joint Tool添加关节工具Reroot Skeleton重新设置根关节Remove Joint去除关节Disconnect Joint解除连接关节Connect Joint连接关节Mirror Joint镜向关节Set Preferred Angle设置参考角Assume Preferred AngleEnable IK Solvers反向动力学解算器有效EIk Handle Snap反向动力学句柄捕捉有效ESelected IK Handles反向动力学句柄有效DSelected IK Handles反向动力学句柄无效Deformations变形Edit Menbership Tool编辑成员工具Prune Membership变形成员Cluster簇变形Lattice旋转变形Sculpt造型变形Wire网格化变形Lattice旋转Sculpt造型Cluster簇Point On Curve线点造型Blend Shape混合变形Blend Shape Edit混合变形编辑Add增加Remove删除Swap交换Wire Tool网格化工具Wire Edit网格编辑Add增加Remove删除Add Holder增加定位曲线Reset重置Wire Dropoff Locator网线定位器Wrinkle Tool褶绉变形工具Edit Lattice编辑旋转Reset Lattice重置旋转Remove Lattice Tweeks恢复旋转Display I-mediate Objects显示中间物体Hide Intermediate Objects隐藏中间物体Skinning皮肤Bind Skin绑定蒙皮Detach Skin断开蒙皮Preserve Skin Groups保持皮肤组Detach Skeleton分离骨骼Detach Selected Joints分离选定关节Reattach Skeleton重新连接骨骼Reattach Selected Joints重新连接关节Create Flexor创建屈肌Reassign Bone Lattice Joint再指定骨头关节Go to Bind Pose恢复骨头绑定Point关节Aim目标Orient方向Scale缩放Geometry几何体Normal法向RenderingLighting灯光Create Ambient Light创建环境光Create Directional Light创建方向灯Create Point Light创建点光源Create Spot Light创建聚光灯Relationship Panel关系面板Light Linking Tool灯光链接工具Shading 阴影Shading Group Attributes阴影组属性Create Shading Group创建阴影组Lambert朗伯材质Phong Phong材质Blinn布林材质Other其他材质Assign Shading Group指定阴影组InitialParticleSE初始粒子系统InitialShadingGroup初始阴影组Shading Group Tool阴影组工具Texture Placement Tool纹理位移工具Render渲染Render into New Window渲染至新窗口Redo Previous Render重复上次渲染Test Resolution测试分辨率Camera Panel照相机面板Render Globals一般渲染Batch Render批渲染Cancel Batch Render取消批渲染Show Batch Render显示批渲染Dynamics动力学系统Settings设置Initial State初始状态Set For Current当前设置Set For All Dynamic设置总体动力学特性Rigid Body Solver刚体解算器Dynamics Controller动力学控制器Particle Collision Events粒子爆炸Particle Caching粒子缓冲Run-up and Cache执行缓冲Cache Current Frame缓冲当前帧Set Selected Particles设置选定粒子Dynamics On动力学开Dynamics Off动力学关Set All Particles设置所有粒子Particles All On When Run执行时粒子系统开Auto Create Rigid Body自动创建刚体Particles粒子Particle Tool粒子工具Create Emitter创建发射器Add Emitter增加发射器Add Collisions增加碰撞Add Goal增加目标Fields场Create Air创建空气动力场Create Drag创建拖动场Create Gravity创建动力场Create Newton创建牛顿场Create Radial创建辐射动力场Create Turbulence创建震荡场Create Uniform创建统一场Create Vortex创建涡流场Add Air增加空气动力场Add Newton增加牛顿场Add Radial增加辐射场Add Turbulence增加震荡场Add Uniform增加统一场Add Vortex增加涡流场Connect连接Connect to Field场连接Connect to Emitter发射器连接Connect to Collision碰撞连接odies柔体和刚体Create Active Rigid Body创建正刚体Create Passive Rigid Body创建负刚体Create Constraint创建约束物体Create Soft Body创建柔体Create Springs创建弹簧Set Active Key设置正向正Set Passive Key设置负向正Help帮助Product Information产品信息。
Maya 菜单中英文对照(附音标)
Maya 菜单中英文对照Standard ：['stændəd] 标准菜单File ：[fail]文件New Scene ：[si:n]建立新场景Open Scene：['əupən]打开场景Save Scene：[seiv]存盘场景Save Scene As 改名存盘Import ：[im'pɔ:t]导入Export All：[eks'pɔ:t]导出所有Export Selection：[si'lekʃən]导出选定物体Create Reference：[kri'eit] ：['refərəns]引入场景文件Reference Editor引入场景编辑器Project：[prə'dʒekt]项目New建立新项目Edit Current：['edit] ：['kə:rənt]编辑当前项目Set ：[set]指定当前项目Exit：['eksit]退出Edit：['edit]编辑Undo：['ʌn'du:]取消上一次操作Redo：[ri:'du:]恢复上一次操作Repeat：[ri'pi:t]重复最后一次操作Keys关键帧Cut Keys裁剪关键帧Copy Keys拷贝关键帧Paste Keys：[peist]粘贴关键帧Delete Keys：[di'li:t]删除关键帧Scale Keys：[skeil]缩放关键帧Bake Simulation：[beik] ：[,simju'leiʃən]模拟复制Delete删除Delete by Type：[taip]根据类型删除History：['histəri]构造历史Channels通道Static Channels：['stætik]静帧通道Motion Paths：['məuʃən] ：[pɑ:θ]运动路径expression_r_r_rs：[iks'preʃən]表达式Constraints：[kən'streint]约束Rigid Bodies：['ridʒid]刚体Delete All by Type根据类型删除所有Unused Transforms：['ʌn'ju:zd] ：[træns'fɔ:m]未用变形Joints：[dʒɔint]连接IK Handles：['hændl]逆向运动控制柄Lattices：['lætis]晶格车削Clusters：['klʌstə]族Sculpt Objects：[skʌlpt] ：['ɔbdʒikt]雕刻物体Wires：['waiə]网格Lights：[lait]灯光Cameras：['kæmərə]照相机Image Planes：['imidʒ] ：[plein]图像板Shading Groups and Materials：['ʃeidiŋ] ：[gru:p] ：[mə'tiəriəl]阴影组和材质Particles：['pɑ:tikl]粒子Rigid Bodies：['ridʒid]刚体物体Rigid Constraints：[kən'streint]刚体约束Select All：[si'lekt]选择所有Select All by Type根据类型选择所有Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Transforms变形Geometry：[dʒi'ɔmitri]几何体NURBS Geometry NURBS几何体Polygon Geometry音：['pɔligən]多边形几何体Layers：['leiə]层New Layers建立新层Rename Layer：[ri:'neim]更改层名称Remove Current Layer：[ri'mu:v] ：['kə:rənt]移去当前层Layer Editor层编辑器Transfer to Layer：[træns'fə:]转化为层Select All on Layer选择层上所有物体Hide Layer隐藏层Hide All Layers隐藏所有层Show Layer显示层Show All Layers显示所有层Template Layer：['templit]临时层Untemplate Layer解除临时层Hide Inactive Layers：[in'æktiv]隐藏非活动层Template Inactive Layers临时非活动层Duplicate：['dju:plikit]复制Group成组Ungroup解成组Create Empty Group：['empti]建立空成组Parent：['pɛərənt]建立父物体Unparent解除父物体Modify：['mɔdifai]修改Transformation Tools：[,trænsfə'meiʃən]变形工具Move Tool移动工具Rotate Tool：[rəu'teit]旋转工具Scale Tool：[skeil]缩放工具Show Manipulator Tool：[mə'nipjuleitə]显示手动工具Default Object Manipulator：[di'fɔ:lt]默认调节器Proportional Modi Tool：[prə'pɔ:ʃənəl]比例修改工具Move Limit Tool：['limit]移动限制工具Rotate Limit Tool旋转限制工具Scale Limit Tool缩放限制工具Reset Transformations：[,trænsfə'meiʃən]重新设置变形控制Freeze Transformations：[fri:z]冻结变形控制Enable Nodes：[in'eibl] ：[nəud]授权动画节点IK solvers：['sɔlvə]逆向运动连接器Constraints：[kən'streint]约束Snapshots：['snæpʃɔt]快照Disable Node：[dis'eibl]废弃动画节点Make Live：[meik] ：[liv]激活构造物Center Pivot：：['sentə] ['pivət]置中枢轴点Prefix Hierarchy Names：['pri:fiks] ：['haiərɑ:ki]定义前缀Add Attribute：[æd] ：[ə'tribju:t]增加属性Measure：['meʒə]测量Distance Tool：['distəns]距离工具Parameter Tool：[pə'ræmitɚ]参数工具Arc Length Tool：[ɑ:k] ：[leŋθ]弧度工具Animated Snapshot：['æni,meitid] ：['snæpʃɔt]动画快照Animated Sweep：[swi:p]由动画曲线创建几何体曲面Display：[di'splei]显示Geometry：[dʒi'ɔmitri]几何体Backfaces背面Lattice Points：['lætis] ：[pɔint]车削点Lattice Shape：[ʃeip]车削形Local Rotation Axes：['æksi:z]局部旋转轴Rotate Pivots：['pivət]旋转枢轴点Scale Pivots：[skeil]缩放枢轴点Selection Handles：['hændl]选定句柄NURBS Components NURBS：[kəm'pəunənt]元素CVs CV曲线Edit Points编辑点Hulls：[hʌl]可控点Custom：['kʌstəm]定制NURBS Smoothness NURBS：['smu:ðnis]曲面光滑处理Hull物体外壳Rough：[rʌf]边框质量Medium：['mi:diəm]中等质量Fine：[fain]精细质量Custom定制Polygon Components：[kəm'pəunənt]多边形元素Custom Polygon Display：[di'splei]定制多边形显示Fast Interaction：[fɑ:st] ：[,intə'rækʃən]快速交错显示Camera/Light Manipulator：：[mə'nipjuleitə]照相机/灯光操作器Sound：[saund]声音Joint Size：[saiz]关节尺寸IK Handle Size IK把手尺寸Window：['windəu]窗口General Editors：['dʒenərəl]通用编辑器Set Editor系统设置编辑器Attribute Spread Sheet：[ə'tribju:t] ：[spred] ：[ʃi:t]属性编辑器Tool Settings：['setiŋ]工具设置Filter Action Editor：['filtə]：['ækʃən]滤镜动作编辑器Channel Control：['tʃænl] ：[kən'trəul]通道控制信息Connection Editor：[kə'nekʃən]连接编辑器Performance Settings：[pə'fɔ:məns]性能设置Script Editor Script：[skript]编辑器Command Shell：[kə'mɑ:nd]命令窗口Plug-in Manager：[plʌg] ：['mænidʒə]滤镜管理器Rendering Editors：['rendəriŋ]渲染编辑器Rendering Flags：[flæg]渲染标记Hardware Render Buffer：['hɑ:dwɛə] ：['bʌfə]硬件渲染缓冲区Render View：[vju:]渲染视图Shading Groups Editor：['ʃeidiŋ]阴影组编辑器Texture View：['tekstʃə]质地视图Shading Group Attributes阴影组属性Animation Editors动画编辑器Graph Editor：[græf]图形编辑器Dope Sheet：[dəup] ：[ʃi:t]比赛结果预测Blend Shape：[blend]融合形Device Editor：[di'vais]设备编辑器Dynamic Relationships：[dai'næmik] ：[ri'leiʃənʃip]动态关系Attribute Editor属性编辑器Outliner框架Hypergraph超图形Multilister多功能渲染控制expression_r_r_r Editor表达式编辑器Recent Commands：['ri:snt]当前命令Playblast播放预览View Arrangement：[ə'reindʒmənt]视图安排Four四分3 Top Split：[split]上三分3 Left Split左三分3 Right Split右三分3 Bottom Split：['bɔtəm]底部三分2 Stacked：[stækt]二叠分2 Side By Side二平分Single：['siŋgl]单图Previous Arrangement：['pri:vjəs]前次安排Next Arrangement下次安排Saved Layouts：['leiaut]保存布局Single Perspective View：[pə'spektiv]单透视图Four View四分图Persp/Graph/Hyper透视/图形/超图形Persp/Multi/Render透视/多功能/渲染Persp/Multi/Outliner：['autlain]透视/多功能/轮廓Persp/Multi透视/多功能Persp/Outliner透视/轮廓Persp/Graph透视/图形Persp/Set Editor透视/组编辑器Edit Layouts编辑布局Frame Selected in All Views：[freim]所有视图选定帧Frame All in All Views所有视图的所有帧Minimize Application：['minəmaiz] ：[,æpli'keiʃən]最小化应用Raise Application Windows：[reiz]移动窗口向前Options：['ɔpʃən]可选项General Preferences：['dʒenərəl] ：['prefərəns]一般设置UI Preferences用户界面设置Customize UI定制用户界面Hotkeys快捷键Colors颜色Marking Menus：[mɑ:kiŋ] ：['menju:]标记菜单Shelves：[ʃelvz]书架Panels：['pænəl]面板Save Preferences保存设置Status Line：['steitəs] ：[lain]状态栏Shelf书架Feedback Line：['fi:dbæk]反馈栏Channel Box通道面板Time Slider：['slaidə]时间滑动棒Range Slider：[reindʒ]范围滑动棒Command Line命令行Help Line帮助行Show Only Viewing Panes：[pein]仅显示视图面板Show All Panes显示所有面板Modeling：['mɔdliŋ]建模系统Primitives：['primitiv]基本物体Create NURBS创建NURBS物体Sphere：[sfiə]球体Cube：[kju:b]立方体Cylinder：['silində]圆柱体Cone：[kəun]圆台（锥）体Plane：[plein]平面物体Circle：['sə:kl]圆Create Polygons创建多边形物体Torus：['tɔ:rəs]面包圈Create Text：[tekst]创建文本Create Locator：[ləu'keitə]创建指示器Construction Plane：[kən'strʌkʃən]构造平面Create Camera创建照相机Curves：[kə:v]创建曲线CV Curve Tool CV曲线工具EP Curve Tool EP曲线工具Pencil Curve Tool：['pensl]笔曲线工具Add Points Tool加点工具Curve Editing Tool曲线编辑工具Offset Curve：['ɔf,set]曲线移动Offset Curve On Surface曲线在表面移动Project Tangent：：[prə'dʒekt] ['tændʒənt]曲线切线调整Fillet Curve：['filit]带状曲线Rebuild Curve：[ri:'bild]重建曲线Extend Curve：[iks'tend]扩展曲线Insert Knot：[in'sə:t] ：[nɔt]插入节点Attach Curves：[ə'tætʃ]连接曲线Detach Curves：[di'tætʃ]断开曲线Align Curves：[ə'lain]对齐曲线Open/Close Curves打开/关闭曲线Reverse Curves：[ri'və:s]反转曲线Duplicate Curves：['dju:plikit]复制曲线CV Hardness：['hɑ:dnis]硬化曲线Fit B-spline：[fit] ：[splain]适配贝塔曲线Surfaces曲面Bevel：['bevəl]斜角Extrude：[eks'tru:d]凸出Loft：[lɔ:ft]放样Planar：['pleinə]曲面Revolve：[ri'vɔlv]旋转Boundary：['baundri]边界Birail 1 Tool二对一工具Birail 2 Tool二对二工具Birail 3+ Tool二对三工具Circular Fillet：['sə:kjulə] ：['filit]圆边斜角Freeform Fillet：['fri:fɔ:m] ：['filit]自由形斜角Fillet Blend Tool：[blend]斜角融合工具Edit Surfaces编辑曲面Intersect Surfaces：[,intə'sekt]曲面交叉Project Curve投影曲线Trim Tool：[trim]修整曲线工具Untrim Surfaces撤消修整Rebuild Surfaces重建曲面Prepare For Stitch：[pri'pɛə]准备缝合Stitch Surface Points：[stitʃ]点缝合曲面Stitch Tool缝合工具NURBS to Polygons NURBS转化为多边形Insert Isoparms添加元素Attach Surfaces曲面结合Detach Surfaces曲面分离Align Surfaces曲面对齐Open/Close Surfaces打开/关闭曲面Reverse Surfaces反转曲面Create Polygon Tool创建多边形工具Append to Polygon Tool追加多边形Split Polygon Tool：[split]分离多边形工具Move Component：[kəm'pəunənt]移动元素Subdivide：['sʌbdi'vaid]多边形细化Collapse：[kə'læps]面转点Edges：[edʒ]边界Soften/Harden：['sɔfn] ：['hɑ:dn]柔化/硬化Close Border：['bɔ:də]关闭边界Merge Tool：[mə:dʒ]合并工具Bevel斜角Delete and Clean删除和清除Facets面Keep Facets Together保留边线Extract：[iks'trækt]破碎Triangulate：[trai'æŋgjuleit]三角分裂Quadrangulate四边形合并Trim Facet Tool面修整工具Normals：['nɔ:məl]法向Reverse：[ri'və:s]倒转法向PropagatePropagate传播法向Conform：[kən'fɔ:m]统一法向Assign Shader to Each Projection：[ə'sain] ：[i:tʃ] ：[prə'dʒekʃən]指定投影Planar Mapping：['mæpiŋ]平面贴图Cylindrical Mapping：[si'lindrikl]圆柱体贴图Spherical Mapping球体贴图Delete Mapping删除贴图Cut Texture：['tekstʃə]裁剪纹理Sew Texture：[səu]斜拉纹理Unite：[ju:'nait]联合Separate：['sepəreit]分离Smooth光滑Selection Constraints：[kən'streint]选定限定工具Smart Command Settings：[smɑ:t]改变显示属性Convert Selection：[kən'və:t]转化选定Uninstall Current Settins：['kə:rənt]解除当前设定Auto Key：['ɔ:təu]自动设置关键帧Spline：[splain]样条曲线式Linear：['liniə]直线式Clamped夹具式Stepped：[stept]台阶式Flat：[flæt]平坦式Other其他形式Set Driven Key：['drivən]设置驱动关键帧Set设置Go To Previous：['pri:vjəs]前移Go To Next后退Set Key设置帧Hold Current Keys：['kə:rənt]保留当前帧Paths：[pɑ:θ]路径Set Path Key设置路径关键帧Attach to Path指定路径Flow Path Object物体跟随路径Skeletons：['skelitn]骨骼Joint Tool：[dʒɔint]关节工具IK Handle Tool反向动力学句柄工具IK Spline Handle Tool：[splain]反向动力学样条曲线句柄工具Insert Joint Tool：[in'sə:t]添加关节工具Reroot Skeleton：[,ri:'bu:t]重新设置根关节Remove Joint：[ri'mu:v]去除关节Disconnect Joint [,diskə'nekt]解除连接关节Connect Joint连接关节Mirror Joint：['mirə]镜向关节Set Preferred Angle：[pri'fəd] ：['æŋgl] 设置参考角Assume Preferred Angle：[ə'sju:m] ：[pri'fəd]Enable IK Solvers：[in'eibl] ：['sɔlvə]反向动力学解算器有效EIk Handle Snap：[snæp]反向动力学句柄捕捉有效ESelected IK Handles反向动力学句柄有效DSelected IK Handles反向动力学句柄无效Deformations：[,di:fɔ:'meiʃən]变形Edit Membership Tool：['membə,ʃip]编辑成员工具Prune Membership：[pru:n]变形成员Cluster：['klʌstə]簇变形Lattice：['lætis]旋转变形Sculpt：[skʌlpt]造型变形Wire：['waiə]网格化变形Point On Curve线点造型Blend Shape混合变形Blend Shape Edit混合变形编辑Remove：[ri'mu:v]删除Swap：[swɔp]交换Wire Tool网格化工具Wire Edit网格编辑Add Holder：['həuldə]增加定位曲线Reset重置Wire Dropoff Locator网线定位器Wrinkle Tool：['riŋkl]褶绉变形工具Edit Lattice编辑旋转Reset Lattice重置旋转Remove Lattice Tweeks恢复旋转Display I-mediate Objects：[di'splei] ：['mi:dieit]显示中间物体Hide Intermediate Objects隐藏中间物体Skinning：[skin]皮肤Bind Skin：[baind]绑定蒙皮Detach Skin断开蒙皮Preserve Skin Groups：[pri'zə:v]保持皮肤组Detach Skeleton：['skelitn]分离骨骼Detach Selected Joints分离选定关节Reattach Skeleton：[ə'tætʃ]重新连接骨骼Reattach Selected Joints重新连接关节Create Flexor：['fleksə]创建屈肌Reassign Bone Lattice Joint：[,ri:ə'sain] ：[bəun]再指定骨头关节Go to Bind Pose：[pəuz]恢复骨头绑定Joint：[dʒɔint]关节Aim目标Orient：['ɔ:riənt]方向Scale：[skeil]缩放Lighting灯光Create Light创建环境光Create Directional Light：['æmbiənt]创建方向灯Create Point Light创建点光源Create Spot Light：[spɔt]创建聚光灯Relationship Panel关系面板Light Linking Tool：[liŋk]灯光链接工具Shading 阴影Shading Group Attributes阴影组属性Create Shading Group创建阴影组Lambert：['læmbət]朗伯材质Phong材质Blinn布林材质Other其他材质Assign Shading Group指定阴影组Initial Particle SE：[i'niʃəl]初始粒子系统InitialShadingGroup初始阴影组Shading Group Tool阴影组工具Texture Placement Tool：：['tekstʃə] ['pleismənt]纹理位移工具Render into New Window渲染至新窗口Redo Previous Render：[ri:'du:]重复上次渲染Test Resolution：[,rezə'lu:ʃən]测试分辨率Camera Panel：['pænəl]照相机面板Render Globals：['gləubəl]一般渲染Batch Render：[bætʃ]批渲染Cancel Batch Render：['kænsl]取消批渲染Show Batch Render显示批渲染Dynamics：[dai'næmiks]动力学系统Settings设置Initial State：[i'niʃəl] ：[steit]初始状态Set For Current：['kə:rənt]当前设置Set For All Dynamic设置总体动力学特性Rigid Body Solver：['sɔlvə]刚体解算器Dynamics Controller：[kən'trəulə]动力学控制器Particle Collision Events：['pɑ:tikl] ：[kə'liʒən] ：[i'vent]粒子爆炸Particle Caching粒子缓冲Run-up and Cache执行缓冲：['rʌn,ʌp]Cache Current Frame：['kə:rənt]缓冲当前帧Set Selected Particles设置选定粒子Dynamics On动力学开Dynamics Off动力学关Set All Particles设置所有粒子Particles All On When Run执行时粒子系统开Auto Create Rigid Body自动创建刚体Particles粒子Particle Tool粒子工具Create Emitter：[i'mitə]创建发射器Add Emitter增加发射器Add Collisions：[kə'liʒən]增加碰撞Add Goal：[gəul]增加目标Fields：[fi:ld]场Create Air：[ɛə]创建空气动力场Create Drag：[dræg]创建拖动场Create Gravity：['græviti]创建动力场Create Newton创建牛顿场Create Radial：['reidiəl]创建辐射动力场Create Turbulence：['tə:bjuləns]创建震荡场Create Uniform：['ju:nifɔ:m]创建统一场Create V ortex：['vɔ:teks]创建涡流场Add Air增加空气动力场Add Newton增加牛顿场Add Radial增加辐射场Add Turbulence增加震荡场Add Uniform增加统一场Add V ortex增加涡流场Connect连接Connect to Field场连接Connect to Emitter：[i'mitə发射器连接Connect to Collision：[kə'liʒən]碰撞连接Bodies柔体和刚体Create Active Rigid Body：['æktiv] ：['ridʒid]创建正刚体Create Passive Rigid Body：['pæsiv]创建负刚体Create Constraint：[kən'streint]创建约束物体Create Soft Body创建柔体Create Springs：[spriŋ]创建弹簧Set Active Key设置正向正Set Passive Key设置负向正Help帮助Product Information产品信息Help帮助。
maya命令中英文对照表
Maya菜单中英文对照(全) Standard标准菜单File文件New Scene建立新场景Open Scene打开场景Save Scene存盘场景Save Scene As改名存盘Import导入Export All导出所有Export Selection导出选定物体Create Reference引入场景文件Reference Editor引入场景编辑器Project项目New建立新项目Edit Current编辑当前项目Set指定当前项目Exit退出Edit编辑Undo取消上一次操作Redo恢复上一次操作Repeat重复最后一次操作Keys关键帧Cut Keys裁剪关键帧Copy Keys拷贝关键帧Paste Keys粘贴关键帧Delete Keys删除关键帧Scale Keys缩放关键帧Bake Simulation模拟复制Delete删除Delete by Type根据类型删除History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Rigid Bodies刚体Delete All by Type根据类型删除所有History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Unused Transforms未用变形Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Lights灯光Cameras照相机Image Planes图像板Shading Groups and Materials阴影组和材质Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Select All选择所有Select All by Type根据类型选择所有Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Transforms变形Geometry几何体NURBS Geometry NURBS几何体Polygon Geometry多边形几何体Lights灯光Cameras照相机Image Planes图像板Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Quick Select Set快速选择集Layers层New Layers建立新层Rename Layer更改层名称Remove Current Layer移去当前层Layer Editor层编辑器Transfer to Layer转化为层Select All on Layer选择层上所有物体Hide Layer隐藏层Hide All Layers隐藏所有层Show Layer显示层Show All Layers显示所有层Template Layer临时层Untemplate Layer解除临时层Hide Inactive Layers隐藏非活动层Template Inactive Layers临时非活动层Duplicate复制Group成组Ungroup解成组Create Empty Group建立空成组Parent建立父物体Unparent解除父物体Modify修改Transformation Tools变形工具Move Tool移动工具Rotate Tool旋转工具Scale Tool缩放工具Show Manipulator Tool显示手动工具Default Object Manipulator默认调节器Proportional Modi Tool比例修改工具Move Limit Tool移动限制工具Rotate Limit Tool旋转限制工具Scale Limit Tool缩放限制工具Reset Transformations重新设置变形控制Freeze Transformations冻结变形控制Enable Nodes授权动画节点All所有IK solvers逆向运动连接器Constraints约束Expressions表达式Particles粒子Rigid Bodies刚体Snapshots快照Disable Node废弃动画节点Make Live激活构造物Center Pivot置中枢轴点Prefix Hierarchy Names定义前缀Add Attribute增加属性Measure测量Distance Tool距离工具Parameter Tool参数工具Arc Length Tool弧度工具Animated Snapshot动画快照Animated Sweep由动画曲线创建几何体曲面Display显示Geometry几何体Backfaces背面Lattice Points车削点Lattice Shape车削形Local Rotation Axes局部旋转轴Rotate Pivots旋转枢轴点Scale Pivots缩放枢轴点Selection Handles选定句柄NURBS Components NURBS元素CVs CV曲线Edit Points编辑点Hulls可控点Custom定制NURBS Smoothness NURBS曲面光滑处理Hull物体外壳Rough边框质量Medium中等质量Fine精细质量Custom定制Polygon Components多边形元素Custom Polygon Display定制多边形显示Fast Interaction快速交错显示Camera/Light Manipulator照相机/灯光操作器Sound声音Joint Size关节尺寸IK Handle Size IK把手尺寸Window窗口General Editors通用编辑器Set Editor系统设置编辑器Attribute Spread Sheet属性编辑器Tool Settings工具设置Filter Action Editor滤镜动作编辑器Channel Control通道控制信息Connection Editor连接编辑器Performance Settings性能设置Script Editor Script编辑器Command Shell命令窗口Plug-in Manager滤镜管理器Rendering Editors渲染编辑器Rendering Flags渲染标记Hardware Render Buffer硬件渲染缓冲区Render View渲染视图Shading Groups Editor阴影组编辑器Texture View质地视图Shading Group Attributes阴影组属性Animation Editors动画编辑器Graph Editor图形编辑器Dope SheetBlend Shape融合形Device Editor设备编辑器Dynamic Relationships动态关系Attribute Editor属性编辑器Outliner框架Hypergraph超图形Multilister多功能渲染控制Expression Editor表达式编辑器Recent Commands当前命令Playblast播放预览View Arangement视图安排Four四分3 Top Split上三分3 Left Split左三分3 Right Split右三分3 Bottom Split底部三分2 Stacked二叠分2 Side By Side二平分Single单图Previous Arrangement前次安排Next Arrangement下次安排Saved Layouts保存布局Single Perspective View单透视图Four View四分图Persp/Graph/Hyper透视/图形/超图形Persp/Multi/Render透视/多功能/渲染Persp/Multi/Outliner透视/多功能/轮廓Persp/Multi透视/多功能Persp/Outliner透视/轮廓Persp/Graph透视/图形Persp/Set Editor透视/组编辑器Edit Layouts编辑布局Frame Selected in All Views所有视图选定帧Frame All in All Views所有视图的所有帧Minimize Application最小化应用Raise Application Windows移动窗口向前Options可选项General Preferences一般设置UI Preferences用户界面设置Customize UI定制用户界面Hotkeys快捷键Colors颜色Marking Menus标记菜单Shelves书架Panels面板Save Preferences保存设置Status Line状态栏Shelf书架Feedback Line反馈栏Channel Box通道面板Time Slider时间滑动棒Range Slider范围滑动棒Command Line命令行Help Line帮助行Show Only Viewing Panes仅显示视图面板Show All Panes显示所有面板Modeling建模系统Primitives基本物体Create NURBS创建NURBS物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Circle圆Create Polygons创建多边形物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Torus面包圈Create Text创建文本Create Locator创建指示器Construction Plane构造平面Create Camera创建照相机Curves创建曲线CV Curve Tool CV曲线工具EP Curve Tool EP曲线工具Pencil Curve Tool笔曲线工具Add Points Tool加点工具Curve Editing Tool曲线编辑工具Offset Curve曲线移动Offset Curve On Surface曲线在表面移动Project Tangent曲线切线调整Fillet Curve带状曲线Rebuild Curve重建曲线Extend Curve扩展曲线Insert Knot插入节点Attach Curves连接曲线Detach Curves断开曲线Align Curves对齐曲线Open/Close Curves打开/关闭曲线Reserse Curves反转曲线Duplicate Curves复制曲线CV Hardness硬化曲线Fit B-spline适配贝塔曲线Surfaces曲面Bevel斜角Extrude凸出Loft放样Planar曲面Revolve旋转Boundary边界Birail 1 Tool二对一工具Birail 2 Tool二对二工具Birail 3+ Tool二对三工具Circular Fillet圆边斜角Freeform Fillet***形斜角Fillet Blend Tool斜角融合工具Edit Surfaces编辑曲面Intersect Surfaces曲面交叉Project Curve投影曲线Trim Tool修整曲线工具Untrim Surfaces撤消修整Rebuild Surfaces重建曲面Prepare For Stitch准备缝合Stitch Surface Points点缝合曲面Stitch Tool缝合工具NURBS to Polygons NURBS转化为多边形Insert Isoparms添加元素Attach Surfaces曲面结合Detach Surfaces曲面分离Align Surfaces曲面对齐Open/Close Surfaces打开/关闭曲面Reverse Surfaces反转曲面Polygones多边形Create Polygon Tool创建多边形工具Append to Polygon Tool追加多边形Split Polygon Tool分离多边形工具Move Component移动元素Subdivide多边形细化Collapse面转点Edges边界Soften/Harden柔化/硬化Close Border关闭边界Merge Tool合并工具Bevel斜角Delete and Clean删除和清除Facets面Keep Facets Together保留边线Extract破碎Duplicate复制Triangulate三角分裂Quadrangulate四边形合并Trim Facet Tool面修整工具Normals法向Reverse倒转法向Propagate传播法向Conform统一法向Texture质地Assign Shader to Each Projection指定投影Planar Mapping平面贴图Cylindrical Mapping圆柱体贴图Spherical Mapping球体贴图Delete Mapping删除贴图Cut Texture裁剪纹理Sew Texture斜拉纹理Unite联合Separate分离Smooth光滑Selection Constraints选定限定工具Smart Command Settings改变显示属性Convert Selection转化选定Uninstall Current Settins解除当前设定Animation动画模块Keys关键帧Settings设置关键帧Auto Key自动设置关键帧Spline样条曲线式Linear直线式Clamped夹具式Stepped台阶式Flat平坦式Other其他形式Set Driven Key设置驱动关键帧Set设置Go To Previous前移Go To Next后退Set Key设置帧Hold Current Keys保留当前帧Set Path Key设置路径关键帧Attach to Path指定路径Flow Path Object物体跟随路径Skeletons骨骼Joint Tool关节工具IK Handle Tool反向动力学句柄工具IK Spline Handle Tool反向动力学样条曲线句柄工具Insert Joint Tool添加关节工具Reroot Skeleton重新设置根关节Remove Joint去除关节Disconnect Joint解除连接关节Connect Joint连接关节Mirror Joint镜向关节Set Preferred Angle设置参考角Assume Preferred AngleEnable IK Solvers反向动力学解算器有效EIk Handle Snap反向动力学句柄捕捉有效ESelected IK Handles反向动力学句柄有效DSelected IK Handles反向动力学句柄无效Deformations变形Edit Menbership Tool编辑成员工具Prune Membership变形成员Cluster簇变形Lattice旋转变形Sculpt造型变形Wire网格化变形Lattice旋转Sculpt造型Cluster簇Point On Curve线点造型Blend Shape混合变形Blend Shape Edit混合变形编辑Add增加Remove删除Swap交换Wire Tool网格化工具Wire Edit网格编辑Add增加Remove删除Add Holder增加定位曲线Reset重置Wire Dropoff Locator网线定位器Wrinkle Tool褶绉变形工具Edit Lattice编辑旋转Reset Lattice重置旋转Remove Lattice Tweeks恢复旋转Display I-mediate Objects显示中间物体Hide Intermediate Objects隐藏中间物体Skinning皮肤Bind Skin绑定蒙皮Detach Skin断开蒙皮Preserve Skin Groups保持皮肤组Detach Skeleton分离骨骼Detach Selected Joints分离选定关节Reattach Skeleton重新连接骨骼Reattach Selected Joints重新连接关节Create Flexor创建屈肌Reassign Bone Lattice Joint再指定骨头关节Go to Bind Pose恢复骨头绑定Point关节Aim目标Orient方向Scale缩放Geometry几何体Normal法向RenderingLighting灯光Create Ambient Light创建环境光Create Directional Light创建方向灯Create Point Light创建点光源Create Spot Light创建聚光灯Relationship Panel关系面板Light Linking Tool灯光链接工具Shading 阴影Shading Group Attributes阴影组属性Create Shading Group创建阴影组Lambert朗伯材质Phong Phong材质Blinn布林材质Other其他材质Assign Shading Group指定阴影组InitialParticleSE初始粒子系统InitialShadingGroup初始阴影组Shading Group Tool阴影组工具Texture Placement Tool纹理位移工具Render渲染Render into New Window渲染至新窗口Redo Previous Render重复上次渲染Test Resolution测试分辨率Camera Panel照相机面板Render Globals一般渲染Batch Render批渲染Cancel Batch Render取消批渲染Show Batch Render显示批渲染Dynamics动力学系统Settings设置Initial State初始状态Set For Current当前设置Set For All Dynamic设置总体动力学特性Rigid Body Solver刚体解算器Dynamics Controller动力学控制器Particle Collision Events粒子爆炸Particle Caching粒子缓冲Run-up and Cache执行缓冲Cache Current Frame缓冲当前帧Set Selected Particles设置选定粒子Dynamics On动力学开Dynamics Off动力学关Set All Particles设置所有粒子Particles All On When Run执行时粒子系统开Auto Create Rigid Body自动创建刚体Particles粒子Particle Tool粒子工具Create Emitter创建发射器Add Emitter增加发射器Add Collisions增加碰撞Add Goal增加目标Fields场Create Air创建空气动力场Create Drag创建拖动场Create Gravity创建动力场Create Newton创建牛顿场Create Radial创建辐射动力场Create Turbulence创建震荡场Create Uniform创建统一场Create Vortex创建涡流场Add Air增加空气动力场Add Newton增加牛顿场Add Radial增加辐射场Add Turbulence增加震荡场Add Uniform增加统一场Add Vortex增加涡流场Connect连接Connect to Field场连接Connect to Emitter发射器连接Connect to Collision碰撞连接Bodies柔体和刚体Create Active Rigid Body创建正刚体Create Passive Rigid Body创建负刚体Create Constraint创建约束物体Create Soft Body创建柔体Create Springs创建弹簧Set Active Key设置正向正Set Passive Key设置负向正Help帮助Product Information产品信息Help帮助。
Maya软件单词中英文对照表(最新整理)
Maya软件单词中英文对照表大家好，我是陈丽，大家可以叫我小陈。
，最近在网上看到很多学习maya的网友对英文版的maya比较头痛，我之前在蓝铅笔学习角色表演专业的时候，也尝试着用过英文版的maya。
其实英文版的没有我们想象中的那么难，maya就那几个区域，就那么多的功能键，只要中文的你熟练掌握了以后，英文版的也是可以灵活的运用的。
闲着没事，下面从网上收集了一些关于maya的中英文的对照表，把它们整理了出来。
希望对maya的初学者或者是对英文版maya不太熟悉的朋友能有所帮助。
Standard标准菜单File文件New Scene建立新场景Open Scene打开场景Save Scene存盘场景Save Scene As改名存盘Import导入Export All导出所有Export Selection导出选定物体Create Reference引入场景文件Reference Editor引入场景编辑器Project项目New建立新项目Edit Current编辑当前项目Set指定当前项目Exit退出Edit编辑Undo取消上一次操作Redo恢复上一次操作Repeat重复最后一次操作Keys关键帧Cut Keys裁剪关键帧Copy Keys拷贝关键帧Paste Keys粘贴关键帧Delete Keys删除关键帧Scale Keys缩放关键帧Bake Simulation模拟复制Delete删除Delete by Type根据类型删除History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Rigid Bodies刚体Delete All by Type根据类型删除所有History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Unused Transforms未用变形Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Lights灯光Cameras照相机Image Planes图像板Shading Groups and Materials阴影组和材质Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Select All选择所有Select All by Type根据类型选择所有Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Transforms变形Geometry几何体NURBS Geometry NURBS几何体Polygon Geometry多边形几何体Lights灯光Cameras照相机Image Planes图像板Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Quick Select Set快速选择集Layers层New Layers建立新层Rename Layer更改层名称Remove Current Layer移去当前层Layer Editor层编辑器Transfer to Layer转化为层Select All on Layer选择层上所有物体Hide Layer隐藏层Hide All Layers隐藏所有层Show Layer显示层Show All Layers显示所有层Template Layer临时层Untemplate Layer解除临时层Hide Inactive Layers隐藏非活动层Template Inactive Layers临时非活动层Duplicate复制Group成组Ungroup解成组Create Empty Group建立空成组Parent建立父物体Unparent解除父物体Modify修改Transformation Tools变形工具Move Tool移动工具Rotate Tool旋转工具Scale Tool缩放工具Show Manipulator Tool显示手动工具Default Object Manipulator默认调节器Proportional Modi Tool比例修改工具Move Limit Tool移动限制工具Rotate Limit Tool旋转限制工具Scale Limit Tool缩放限制工具Reset Transformations重新设置变形控制Freeze Transformations冻结变形控制Enable Nodes授权动画节点All所有IK solvers逆向运动连接器Constraints约束Expressions表达式Particles粒子Rigid Bodies刚体Snapshots快照Disable Node废弃动画节点Make Live激活构造物Center Pivot置中枢轴点Prefix Hierarchy Names定义前缀Add Attribute增加属性Measure测量Distance Tool距离工具Parameter Tool参数工具Arc Length Tool弧度工具Animated Snapshot动画快照Animated Sweep由动画曲线创建几何体曲面Display显示Geometry几何体Backfaces背面Lattice Points车削点Lattice Shape车削形Local Rotation Axes局部旋转轴Rotate Pivots旋转枢轴点Scale Pivots缩放枢轴点Selection Handles选定句柄NURBS Components NURBS元素CVs CV曲线Edit Points编辑点Hulls可控点Custom定制NURBS Smoothness NURBS曲面光滑处理Hull物体外壳Rough边框质量Medium中等质量Fine精细质量Custom定制Polygon Components多边形元素Custom Polygon Display定制多边形显示Fast Interaction快速交错显示Camera/Light Manipulator照相机/灯光操作器Sound声音Joint Size关节尺寸IK Handle Size IK把手尺寸Window窗口General Editors通用编辑器Set Editor系统设置编辑器Attribute Spread Sheet属性编辑器Tool Settings工具设置Filter Action Editor滤镜动作编辑器Channel Control通道控制信息Connection Editor连接编辑器Performance Settings性能设置script Editor script编辑器Command Shell命令窗口Plug-in Manager滤镜管理器Rendering Editors渲染编辑器Rendering Flags渲染标记Hardware Render Buffer硬件渲染缓冲区Render View渲染视图Shading Groups Editor阴影组编辑器Texture View质地视图Shading Group Attributes阴影组属性Animation Editors动画编辑器Graph Editor图形编辑器Dope SheetBlend Shape融合形Device Editor设备编辑器Dynamic Relationships动态关系Attribute Editor属性编辑器Outliner框架Hypergraph超图形Multilister多功能渲染控制Expression Editor表达式编辑器Recent Commands当前命令Playblast播放预览View Arangement视图安排Four四分3 Top Split上三分3 Left Split左三分3 Right Split右三分3 Bottom Split底部三分2 Stacked二叠分2 Side By Side二平分Single单图Previous Arrangement前次安排Next Arrangement下次安排Saved Layouts保存布局Single Perspective View单透视图Four View四分图Persp/Graph/Hyper透视/图形/超图形Persp/Multi/Render透视/多功能/渲染Persp/Multi/Outliner透视/多功能/轮廓Persp/Multi透视/多功能Persp/Outliner透视/轮廓Persp/Graph透视/图形Persp/Set Editor透视/组编辑器Edit Layouts编辑布局Frame Selected in All Views所有视图选定帧Frame All in All Views所有视图的所有帧Minimize Application最小化应用Raise Application Windows移动窗口向前Options可选项General Preferences一般设置UI Preferences用户界面设置Customize UI定制用户界面Hotkeys快捷键Colors颜色Marking Menus标记菜单Shelves书架Panels面板Save Preferences保存设置Status Line状态栏Shelf书架Feedback Line反馈栏Channel Box通道面板Time Slider时间滑动棒Range Slider范围滑动棒Command Line命令行Help Line帮助行Show Only Viewing Panes仅显示视图面板Show All Panes显示所有面板 Modeling建模系统Primitives基本物体Create NURBS创建NURBS物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Circle圆Create Polygons创建多边形物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Torus面包圈Create Text创建文本Create Locator创建指示器Construction Plane构造平面Create Camera创建照相机Curves创建曲线CV Curve Tool CV曲线工具EP Curve Tool EP曲线工具Pencil Curve Tool笔曲线工具Add Points Tool加点工具Curve Editing Tool曲线编辑工具Offset Curve曲线移动Offset Curve On Surface曲线在表面移动Project Tangent曲线切线调整Fillet Curve带状曲线Rebuild Curve重建曲线Extend Curve扩展曲线Insert Knot插入节点Attach Curves连接曲线Detach Curves断开曲线Align Curves对齐曲线Open/Close Curves打开/关闭曲线Reserse Curves反转曲线Duplicate Curves复制曲线CV Hardness硬化曲线Fit B-spline适配贝塔曲线Surfaces曲面Bevel斜角Extrude凸出Loft放样Planar曲面Revolve旋转Boundary边界Birail 1 Tool二对一工具Birail 2 Tool二对二工具Birail 3+ Tool二对三工具Circular Fillet圆边斜角Freeform Fillet自由形斜角Fillet Blend Tool斜角融合工具Edit Surfaces编辑曲面Intersect Surfaces曲面交叉Project Curve投影曲线Trim Tool修整曲线工具Untrim Surfaces撤消修整Rebuild Surfaces重建曲面Prepare For Stitch准备缝合Stitch Surface Points点缝合曲面Stitch Tool缝合工具NURBS to Polygons NURBS转化为多边形Insert Isoparms添加元素Attach Surfaces曲面结合Detach Surfaces曲面分离Align Surfaces曲面对齐Open/Close Surfaces打开/关闭曲面Reverse Surfaces反转曲面Polygones多边形Create Polygon Tool创建多边形工具Append to Polygon Tool追加多边形Split Polygon Tool分离多边形工具Move Component移动元素Subdivide多边形细化Collapse面转点Edges边界Soften/Harden柔化/硬化Close Border关闭边界Merge Tool合并工具Bevel斜角Delete and Clean删除和清除Facets面Keep Facets Together保留边线Extrude凸出Extract破碎Duplicate复制Triangulate三角分裂Quadrangulate四边形合并Trim Facet Tool面修整工具Normals法向Reverse倒转法向Propagate传播法向Conform统一法向Texture质地Assign Shader to Each Projection指定投影Planar Mapping平面贴图Cylindrical Mapping圆柱体贴图Spherical Mapping球体贴图Delete Mapping删除贴图Cut Texture裁剪纹理Sew Texture斜拉纹理Unite联合Separate分离Smooth光滑Selection Constraints选定限定工具Smart Command Settings改变显示属性Convert Selection转化选定Uninstall Current Settins解除当前设定Animation动画模块Keys关键帧Settings设置关键帧Auto Key自动设置关键帧Spline样条曲线式Linear直线式Clamped夹具式Stepped台阶式Flat平坦式Other其他形式Set Driven Key设置驱动关键帧Set设置Go To Previous前移Go To Next后退Set Key设置帧Hold Current Keys保留当前帧Paths路径Set Path Key设置路径关键帧Attach to Path指定路径Flow Path Object物体跟随路径Skeletons骨骼Joint Tool关节工具IK Handle Tool反向动力学句柄工具IK Spline Handle Tool反向动力学样条曲线句柄工具Insert Joint Tool添加关节工具Reroot Skeleton重新设置根关节Remove Joint去除关节Disconnect Joint解除连接关节Connect Joint连接关节Mirror Joint镜向关节Set Preferred Angle设置参考角Assume Preferred AngleEnable IK Solvers反向动力学解算器有效EIk Handle Snap反向动力学句柄捕捉有效ESelected IK Handles反向动力学句柄有效DSelected IK Handles反向动力学句柄无效Deformations变形Edit Menbership Tool编辑成员工具Prune Membership变形成员Cluster簇变形Lattice旋转变形Sculpt造型变形Wire网格化变形Lattice旋转Sculpt造型Cluster簇Point On Curve线点造型Blend Shape混合变形Blend Shape Edit混合变形编辑Add增加Remove删除Swap交换Wire Tool网格化工具Wire Edit网格编辑Add增加Remove删除Add Holder增加定位曲线Reset重置Wire Dropoff Locator网线定位器Wrinkle Tool褶绉变形工具Edit Lattice编辑旋转Reset Lattice重置旋转Remove Lattice Tweeks恢复旋转Display I-mediate Objects显示中间物体Hide Intermediate Objects隐藏中间物体Skinning皮肤Bind Skin绑定蒙皮Detach Skin断开蒙皮Preserve Skin Groups保持皮肤组Detach Skeleton分离骨骼Detach Selected Joints分离选定关节Reattach Skeleton重新连接骨骼Reattach Selected Joints重新连接关节Create Flexor创建屈肌Reassign Bone Lattice Joint再指定骨头关节Go to Bind Pose恢复骨头绑定Point关节Aim目标orient方向Scale缩放Geometry几何体Normal法向 RenderingLighting灯光Create Ambient Light创建环境光Create Directional Light创建方向灯Create Point Light创建点光源Create Spot Light创建聚光灯Relationship Panel关系面板Light Linking Tool灯光链接工具Shading 阴影Shading Group Attributes阴影组属性Create Shading Group创建阴影组Lambert朗伯材质Phong Phong材质Blinn布林材质Other其他材质Assign Shading Group指定阴影组InitialParticleSE初始粒子系统InitialShadingGroup初始阴影组Shading Group Tool阴影组工具Texture Placement Tool纹理位移工具Render渲染Render into New Window渲染至新窗口Redo Previous Render重复上次渲染Test Resolution测试分辨率Camera Panel照相机面板Render Globals一般渲染Batch Render批渲染Cancel Batch Render取消批渲染Show Batch Render显示批渲染Dynamics动力学系统Settings设置Initial State初始状态Set For Current当前设置Set For All Dynamic设置总体动力学特性Rigid Body Solver刚体解算器Dynamics Controller动力学控制器Particle Collision Events粒子爆炸Particle Caching粒子缓冲Run-up and Cache执行缓冲Cache Current Frame缓冲当前帧Set Selected Particles设置选定粒子Dynamics On动力学开Dynamics Off动力学关Set All Particles设置所有粒子Particles All On When Run执行时粒子系统开Auto Create Rigid Body自动创建刚体Particles粒子Particle Tool粒子工具Create Emitter创建发射器Add Emitter增加发射器Add Collisions增加碰撞Add Goal增加目标Fields场Create Air创建空气动力场Create Drag创建拖动场Create Gravity创建动力场Create Newton创建牛顿场Create Radial创建辐射动力场Create Turbulence创建震荡场Create Uniform创建统一场Create Vortex创建涡流场Add Air增加空气动力场Add Newton增加牛顿场Add Radial增加辐射场Add Turbulence增加震荡场Add Uniform增加统一场Add Vortex增加涡流场Connect连接Connect to Field场连接Connect to Emitter发射器连接Connect to Collision碰撞连接Bodies柔体和刚体Create Active Rigid Body创建正刚体Create Passive Rigid Body创建负刚体Create Constraint创建约束物体Create Soft Body创建柔体Create Springs创建弹簧Set Active Key设置正向正Set Passive Key设置负向正Standard标准菜单File文件New Scene建立新场景Open Scene打开场景Save Scene存盘场景Save Scene As改名存盘Import导入Export All导出所有Export Selection导出选定物体Create Reference引入场景文件Reference Editor引入场景编辑器Project项目New建立新项目Edit Current编辑当前项目Set指定当前项目Exit退出******************Edit编辑Undo取消上一次操作Redo恢复上一次操作Repeat重复最后一次操作Keys关键帧Cut Keys裁剪关键帧Copy Keys拷贝关键帧Paste Keys粘贴关键帧Delete Keys删除关键帧Scale Keys缩放关键帧Bake Simulation模拟复制Delete删除Delete by Type根据类型删除History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Rigid Bodies刚体Delete All by Type根据类型删除所有History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Unused Transforms未用变形Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Lights灯光Cameras照相机Image Planes图像板Shading Groups and Materials阴影组和材质Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Select All选择所有Select All by Type根据类型选择所有Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Transforms变形Geometry几何体NURBS Geometry NURBS几何体Polygon Geometry多边形几何体Lights灯光Cameras照相机Image Planes图像板Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Quick Select Set快速选择集Layers层New Layers建立新层Rename Layer更改层名称Remove Current Layer移去当前层Layer Editor层编辑器Transfer to Layer转化为层Select All on Layer选择层上所有物体Hide Layer隐藏层Hide All Layers隐藏所有层Show Layer显示层Show All Layers显示所有层Template Layer临时层Untemplate Layer解除临时层Hide Inactive Layers隐藏非活动层Template Inactive Layers临时非活动层Duplicate复制Group成组Ungroup解成组Create Empty Group建立空成组Parent建立父物体Unparent解除父物体**********************************Modify修改Transformation Tools变形工具Move Tool移动工具Rotate Tool旋转工具Scale Tool缩放工具Show Manipulator Tool显示手动工具Default Object Manipulator默认调节器Proportional Modi Tool比例修改工具Move Limit Tool移动限制工具Rotate Limit Tool旋转限制工具Scale Limit Tool缩放限制工具Reset Transformations重新设置变形控制Freeze Transformations冻结变形控制Enable Nodes授权动画节点All所有IK solvers逆向运动连接器Constraints约束Expressions表达式Particles粒子Rigid Bodies刚体Snapshots快照Disable Node废弃动画节点Make Live激活构造物Center Pivot置中枢轴点Prefix Hierarchy Names定义前缀Add Attribute增加属性Measure测量Distance Tool距离工具Parameter Tool参数工具Arc Length Tool弧度工具Animated Snapshot动画快照Animated Sweep由动画曲线创建几何体曲面*************************************Display显示Geometry几何体Backfaces背面Lattice Points车削点Lattice Shape车削形Local Rotation Axes局部旋转轴Rotate Pivots旋转枢轴点Scale Pivots缩放枢轴点Selection Handles选定句柄NURBS Components NURBS元素CVs CV曲线Edit Points编辑点Hulls可控点Custom定制NURBS Smoothness NURBS曲面光滑处理Hull物体外壳Rough边框质量Medium中等质量Fine精细质量Custom定制Polygon Components多边形元素Custom Polygon Display定制多边形显示Fast Interaction快速交错显示Camera/Light Manipulator照相机/灯光操作器Sound声音Joint Size关节尺寸IK Handle Size IK把手尺寸*******************************Window窗口General Editors通用编辑器Set Editor系统设置编辑器Attribute Spread Sheet属性编辑器Tool Settings工具设置Filter Action Editor滤镜动作编辑器Channel Control通道控制信息Connection Editor连接编辑器Performance Settings性能设置Script Editor Script编辑器Command Shell命令窗口Plug-in Manager滤镜管理器Rendering Editors渲染编辑器Rendering Flags渲染标记Hardware Render Buffer硬件渲染缓冲区Render View渲染视图Shading Groups Editor阴影组编辑器Texture View质地视图Shading Group Attributes阴影组属性Animation Editors动画编辑器Graph Editor图形编辑器Dope SheetBlend Shape融合形Device Editor设备编辑器Dynamic Relationships动态关系Attribute Editor属性编辑器Outliner框架Hypergraph超图形Multilister多功能渲染控制Expression Editor表达式编辑器Recent Commands当前命令Playblast播放预览View Arangement视图安排Four四分3 Top Split上三分3 Left Split左三分3 Right Split右三分3 Bottom Split底部三分2 Stacked二叠分2 Side By Side二平分Single单图Previous Arrangement前次安排Next Arrangement下次安排Saved Layouts保存布局Single Perspective View单透视图Four View四分图Persp/Graph/Hyper透视/图形/超图形Persp/Multi/Render透视/多功能/渲染Persp/Multi/Outliner透视/多功能/轮廓Persp/Multi透视/多功能Persp/Outliner透视/轮廓Persp/Graph透视/图形Persp/Set Editor透视/组编辑器Edit Layouts编辑布局Frame Selected in All Views所有视图选定帧Frame All in All Views所有视图的所有帧Minimize Application最小化应用Raise Application Windows移动窗口向前Options可选项General Preferences一般设置UI Preferences用户界面设置Customize UI定制用户界面Hotkeys快捷键Colors颜色Marking Menus标记菜单Shelves书架Panels面板Save Preferences保存设置Status Line状态栏Shelf书架Feedback Line反馈栏Channel Box通道面板Time Slider时间滑动棒Range Slider范围滑动棒Command Line命令行***********************************Help Line帮助行Show Only Viewing Panes仅显示视图面板Show All Panes显示所有面板Modeling建模系统Primitives基本物体Create NURBS创建NURBS物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Circle圆Create Polygons创建多边形物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Torus面包圈Create Text创建文本Create Locator创建指示器Construction Plane构造平面Create Camera创建照相机Curves创建曲线CV Curve Tool CV曲线工具EP Curve Tool EP曲线工具Pencil Curve Tool笔曲线工具Add Points Tool加点工具Curve Editing Tool曲线编辑工具Offset Curve曲线移动Offset Curve On Surface曲线在表面移动Project Tangent曲线切线调整Fillet Curve带状曲线Rebuild Curve重建曲线Extend Curve扩展曲线Insert Knot插入节点Attach Curves连接曲线Detach Curves断开曲线Align Curves对齐曲线Open/Close Curves打开/关闭曲线Reserse Curves反转曲线Duplicate Curves复制曲线CV Hardness硬化曲线Fit B-spline适配贝塔曲线****************Surfaces曲面Bevel斜角Extrude凸出Loft放样Planar曲面Revolve旋转Boundary边界Birail 1 Tool二对一工具Birail 2 Tool二对二工具Birail 3+ Tool二对三工具Circular Fillet圆边斜角Freeform Fillet***形斜角Fillet Blend Tool斜角融合工具Edit Surfaces编辑曲面Intersect Surfaces曲面交叉Project Curve投影曲线Trim Tool修整曲线工具Untrim Surfaces撤消修整Rebuild Surfaces重建曲面Prepare For Stitch准备缝合Stitch Surface Points点缝合曲面Stitch Tool缝合工具NURBS to Polygons NURBS转化为多边形Insert Isoparms添加元素Attach Surfaces曲面结合Detach Surfaces曲面分离Align Surfaces曲面对齐Open/Close Surfaces打开/关闭曲面Reverse Surfaces反转曲面Polygones多边形Create Polygon Tool创建多边形工具Append to Polygon Tool追加多边形Split Polygon Tool分离多边形工具Move Component移动元素Subdivide多边形细化Collapse面转点Edges边界Soften/Harden柔化/硬化Close Border关闭边界Merge Tool合并工具Bevel斜角Delete and Clean删除和清除Facets面Keep Facets Together保留边线Extrude凸出Extract破碎Duplicate复制Triangulate三角分裂Quadrangulate四边形合并Trim Facet Tool面修整工具Normals法向Reverse倒转法向Propagate传播法向Conform统一法向Texture质地Assign Shader to Each Projection指定投影Planar Mapping平面贴图Cylindrical Mapping圆柱体贴图Spherical Mapping球体贴图Delete Mapping删除贴图Cut Texture裁剪纹理Sew Texture斜拉纹理Unite联合Separate分离Smooth光滑Selection Constraints选定限定工具Smart Command Settings改变显示属性Convert Selection转化选定Uninstall Current Settins解除当前设定****************Animation动画模块Keys关键帧Settings设置关键帧Auto Key自动设置关键帧Spline样条曲线式Linear直线式Clamped夹具式Stepped台阶式Flat平坦式Other其他形式Set Driven Key设置驱动关键帧Set设置Go To Previous前移Go To Next后退Set Key设置帧Hold Current Keys保留当前帧Paths路径Set Path Key设置路径关键帧Attach to Path指定路径Flow Path Object物体跟随路径Skeletons骨骼Joint Tool关节工具IK Handle Tool反向动力学句柄工具IK Spline Handle Tool反向动力学样条曲线句柄工具Insert Joint Tool添加关节工具Reroot Skeleton重新设置根关节Remove Joint去除关节Disconnect Joint解除连接关节Connect Joint连接关节Mirror Joint镜向关节Set Preferred Angle设置参考角Assume Preferred AngleEnable IK Solvers反向动力学解算器有效EIk Handle Snap反向动力学句柄捕捉有效ESelected IK Handles反向动力学句柄有效DSelected IK Handles反向动力学句柄无效Deformations变形Edit Menbership Tool编辑成员工具Prune Membership变形成员Cluster簇变形Lattice旋转变形Sculpt造型变形Wire网格化变形Lattice旋转Sculpt造型Cluster簇Point On Curve线点造型Blend Shape混合变形Blend Shape Edit混合变形编辑Add增加Remove删除Swap交换Wire Tool网格化工具Wire Edit网格编辑Add增加Remove删除Add Holder增加定位曲线Reset重置Wire Dropoff Locator网线定位器Wrinkle Tool褶绉变形工具Edit Lattice编辑旋转Reset Lattice重置旋转Remove Lattice Tweeks恢复旋转Display I-mediate Objects显示中间物体Hide Intermediate Objects隐藏中间物体Skinning皮肤Bind Skin绑定蒙皮Detach Skin断开蒙皮Preserve Skin Groups保持皮肤组Detach Skeleton分离骨骼Detach Selected Joints分离选定关节Reattach Skeleton重新连接骨骼Reattach Selected Joints重新连接关节Create Flexor创建屈肌Reassign Bone Lattice Joint再指定骨头关节Go to Bind Pose恢复骨头绑定Point关节Aim目标Orient方向Scale缩放Geometry几何体Normal法向****************RenderingLighting灯光Create Ambient Light创建环境光Create Directional Light创建方向灯Create Point Light创建点光源Create Spot Light创建聚光灯Relationship Panel关系面板Light Linking Tool灯光链接工具Shading 阴影Shading Group Attributes阴影组属性Create Shading Group创建阴影组Lambert朗伯材质Phong Phong材质Blinn布林材质Other其他材质Assign Shading Group指定阴影组InitialParticleSE初始粒子系统InitialShadingGroup初始阴影组Shading Group Tool阴影组工具Texture Placement Tool纹理位移工具Render渲染Render into New Window渲染至新窗口Redo Previous Render重复上次渲染Test Resolution测试分辨率Camera Panel照相机面板Render Globals一般渲染Batch Render批渲染Cancel Batch Render取消批渲染Show Batch Render显示批渲染Dynamics动力学系统Settings设置Initial State初始状态Set For Current当前设置Set For All Dynamic设置总体动力学特性Rigid Body Solver刚体解算器Dynamics Controller动力学控制器Particle Collision Events粒子爆炸Particle Caching粒子缓冲Run-up and Cache执行缓冲Cache Current Frame缓冲当前帧Set Selected Particles设置选定粒子Dynamics On动力学开Dynamics Off动力学关Set All Particles设置所有粒子Particles All On When Run执行时粒子系统开Auto Create Rigid Body自动创建刚体Particles粒子Particle Tool粒子工具Create Emitter创建发射器Add Emitter增加发射器Add Collisions增加碰撞Add Goal增加目标Fields场Create Air创建空气动力场Create Drag创建拖动场Create Gravity创建动力场Create Newton创建牛顿场Create Radial创建辐射动力场Create Turbulence创建震荡场Create Uniform创建统一场Create Vortex创建涡流场Add Air增加空气动力场Add Newton增加牛顿场Add Radial增加辐射场Add Turbulence增加震荡场Add Uniform增加统一场Add Vortex增加涡流场Connect连接Connect to Field场连接Connect to Emitter发射器连接Connect to Collision碰撞连接Bodies柔体和刚体Create Active Rigid Body创建正刚体Create Passive Rigid Body创建负刚体Create Constraint创建约束物体Create Soft Body创建柔体Create Springs创建弹簧Set Active Key设置正向正Set Passive Key设置负向正Help帮助Product Information产品信息Help帮助。
Maya中英菜单对照表
Point to point
2 point to 2 points
3 points to points
Make live
将对象表面激活为工作面
可以在对象表面写字
例子：create>nubass.>sphere
Make live
Create >pencil curvl tool
Stereo
Hypergraph
Layouts（布局）
Tear off（撕下布局）
Panel setting
Modify菜单
Transform tools
与工具和上的变换工具对应
Reset transformations
将对象还原到原始状态
Freeze transformations
冻结变换，将对象所有参数变为零
取消禁用选中项
Sync graph editor display
同步图表编辑器显示
Sync timeline display
同步时间线显示
Duplicate values
复制值
Freeze
冻结
Break connection
断开连接
Selected connection
选择连接
Lock selected
右键：出现完成工具（complete tool）和selectall
在多边形物体上
Shift+右键：出现一些编辑物体的命令
右键：切换物体的选择层级，如切换到face等
切换到点层级
Shift+右键：出现对点操作的一些命令
常用的热键快捷菜单
按住a，单击左键
控制对象的输入输出节点菜单
maya菜单中英文对照
Maya 菜单中英文对照File文件New Scene建立新场景Open Scene打开场景Save Scene存盘场景Save Scene As改名存盘Import导入Export All导出所有Export Selection导出选定物体Create Reference引入场景文件Reference Editor引入场景编辑器Project项目New建立新项目Edit Current编辑当前项目Set指定当前项目Exit退出Edit编辑Undo取消上一次操作Redo恢复上一次操作Repeat重复最后一次操作Keys关键帧Cut Keys裁剪关键帧Copy Keys拷贝关键帧Paste Keys粘贴关键帧Delete Keys删除关键帧Scale Keys缩放关键帧Bake Simulation模拟复制Delete删除Delete by Type根据类型删除History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Rigid Bodies刚体Delete All by Type根据类型删除所有History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Unused Transforms未用变形Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Lights灯光Cameras照相机Image Planes图像板Shading Groups and Materials阴影组和材质Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Select All选择所有Select All by Type根据类型选择所有Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Transforms变形Geometry几何体NURBS Geometry NURBS几何体Polygon Geometry多边形几何体Lights灯光Cameras照相机Image Planes图像板Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Quick Select Set快速选择集Layers层New Layers建立新层Rename Layer更改层名称Remove Current Layer移去当前层Layer Editor层编辑器Transfer to Layer转化为层Select All on Layer选择层上所有物体Hide Layer隐藏层Hide All Layers隐藏所有层Show Layer显示层Show All Layers显示所有层Template Layer临时层Untemplate Layer解除临时层Hide Inactive Layers隐藏非活动层Template Inactive Layers临时非活动层Duplicate复制Group成组Ungroup解成组Create Empty Group建立空成组Parent建立父物体Unparent解除父物体Modify修改Transformation Tools变形工具Move Tool移动工具Rotate Tool旋转工具Scale Tool缩放工具Show Manipulator Tool显示手动工具Default Object Manipulator默认调节器Proportional Modi Tool比例修改工具Move Limit Tool移动限制工具Rotate Limit Tool旋转限制工具Scale Limit Tool缩放限制工具Reset Transformations重新设置变形控制Freeze Transformations冻结变形控制Enable Nodes授权动画节点All所有IK solvers逆向运动连接器Constraints约束Expressions表达式Particles粒子Rigid Bodies刚体Snapshots快照Disable Node废弃动画节点Make Live激活构造物Center Pivot置中枢轴点Prefix Hierarchy Names定义前缀Add Attribute增加属性Measure测量Distance Tool距离工具Parameter Tool参数工具Arc Length Tool弧度工具Animated Snapshot动画快照Animated Sweep由动画曲线创建几何体曲面Display显示Geometry几何体Backfaces背面Lattice Points车削点Lattice Shape车削形Local Rotation Axes局部旋转轴Rotate Pivots旋转枢轴点Scale Pivots缩放枢轴点Selection Handles选定句柄NURBS Components NURBS元素CVs CV曲线Edit Points编辑点Hulls可控点Custom定制NURBS Smoothness NURBS曲面光滑处理Hull物体外壳Rough边框质量Medium中等质量Fine精细质量Custom定制Polygon Components多边形元素Custom Polygon Display定制多边形显示Fast Interaction快速交错显示Camera/Light Manipulator照相机/灯光操作器Sound声音Joint Size关节尺寸IK Handle Size IK把手尺寸Window窗口General Editors通用编辑器Set Editor系统设置编辑器Attribute Spread Sheet属性编辑器Tool Settings工具设置Filter Action Editor滤镜动作编辑器Channel Control通道控制信息Connection Editor连接编辑器Performance Settings性能设置Script Editor Script编辑器Command Shell命令窗口Plug-in Manager滤镜管理器Rendering Editors渲染编辑器Rendering Flags渲染标记Hardware Render Buffer硬件渲染缓冲区Render View渲染视图Shading Groups Editor阴影组编辑器Texture View质地视图Shading Group Attributes阴影组属性Animation Editors动画编辑器Graph Editor图形编辑器Dope SheetBlend Shape融合形Device Editor设备编辑器Dynamic Relationships动态关系Attribute Editor属性编辑器Outliner框架Hypergraph超图形Multilister多功能渲染控制Expression Editor表达式编辑器Recent Commands当前命令Playblast播放预览View Arangement视图安排Four四分3 Top Split上三分3 Left Split左三分3 Right Split右三分3 Bottom Split底部三分2 Stacked二叠分2 Side By Side二平分Single单图Previous Arrangement前次安排Next Arrangement下次安排Saved Layouts保存布局Single Perspective View单透视图Four View四分图Persp/Graph/Hyper透视/图形/超图形Persp/Multi/Render透视/多功能/渲染Persp/Multi/Outliner透视/多功能/轮廓Persp/Multi透视/多功能Persp/Outliner透视/轮廓Persp/Graph透视/图形Persp/Set Editor透视/组编辑器Edit Layouts编辑布局Frame Selected in All Views所有视图选定帧Frame All in All Views所有视图的所有帧Minimize Application最小化应用Raise Application Windows移动窗口向前Options可选项General Preferences一般设置UI Preferences用户界面设置Customize UI定制用户界面Hotkeys快捷键Colors颜色Marking Menus标记菜单Shelves书架Panels面板Save Preferences保存设置Status Line状态栏Shelf书架Feedback Line反馈栏Channel Box通道面板Time Slider时间滑动棒Range Slider范围滑动棒Command Line命令行Maya 菜单中英文对照Help Line帮助行Show Only Viewing Panes仅显示视图面板Show All Panes显示所有面板Modeling建模系统Primitives基本物体Create NURBS创建NURBS物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Circle圆Create Polygons创建多边形物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Torus面包圈Create Text创建文本Create Locator创建指示器Construction Plane构造平面Create Camera创建照相机Curves创建曲线CV Curve Tool CV曲线工具EP Curve Tool EP曲线工具Pencil Curve Tool笔曲线工具Add Points Tool加点工具Curve Editing Tool曲线编辑工具Offset Curve曲线移动Offset Curve On Surface曲线在表面移动Project Tangent曲线切线调整Fillet Curve带状曲线Rebuild Curve重建曲线Extend Curve扩展曲线Insert Knot插入节点Attach Curves连接曲线Detach Curves断开曲线Align Curves对齐曲线Open/Close Curves打开/关闭曲线Reserse Curves反转曲线Duplicate Curves复制曲线CV Hardness硬化曲线Fit B-spline适配贝塔曲线Maya 菜单中英文对照Surfaces曲面Bevel斜角Extrude凸出Loft放样Planar曲面Revolve旋转Boundary边界Birail 1 Tool二对一工具Birail 2 Tool二对二工具Birail 3+ Tool二对三工具Circular Fillet圆边斜角Freeform Fillet***形斜角Fillet Blend Tool斜角融合工具Edit Surfaces编辑曲面Intersect Surfaces曲面交叉Project Curve投影曲线Trim Tool修整曲线工具Untrim Surfaces撤消修整Rebuild Surfaces重建曲面Prepare For Stitch准备缝合Stitch Surface Points点缝合曲面Stitch Tool缝合工具NURBS to Polygons NURBS转化为多边形Insert Isoparms添加元素Attach Surfaces曲面结合Detach Surfaces曲面分离Align Surfaces曲面对齐Open/Close Surfaces打开/关闭曲面Reverse Surfaces反转曲面Polygones多边形Create Polygon Tool创建多边形工具Append to Polygon Tool追加多边形Split Polygon Tool分离多边形工具Move Component移动元素Subdivide多边形细化Collapse面转点Edges边界Soften/Harden柔化/硬化Close Border关闭边界Merge Tool合并工具Bevel斜角Delete and Clean删除和清除Facets面Keep Facets Together保留边线Extrude凸出Extract破碎Duplicate复制Triangulate三角分裂Quadrangulate四边形合并Trim Facet Tool面修整工具Normals法向Reverse倒转法向Propagate传播法向Conform统一法向Texture质地Assign Shader to Each Projection指定投影Planar Mapping平面贴图Cylindrical Mapping圆柱体贴图Spherical Mapping球体贴图Delete Mapping删除贴图Cut Texture裁剪纹理Sew Texture斜拉纹理Unite联合Separate分离Smooth光滑Selection Constraints选定限定工具Smart Command Settings改变显示属性Convert Selection转化选定Uninstall Current Settins解除当前设定Animation动画模块Keys关键帧Settings设置关键帧Auto Key自动设置关键帧Spline样条曲线式Linear直线式Clamped夹具式Stepped台阶式Flat平坦式Other其他形式Set Driven Key设置驱动关键帧Set设置Go To Previous前移Go To Next后退Set Key设置帧Hold Current Keys保留当前帧Paths路径Set Path Key设置路径关键帧Attach to Path指定路径Flow Path Object物体跟随路径Skeletons骨骼Joint Tool关节工具IK Handle Tool反向动力学句柄工具IK Spline Handle Tool反向动力学样条曲线句柄工具Insert Joint Tool添加关节工具Reroot Skeleton重新设置根关节Remove Joint去除关节Disconnect Joint解除连接关节Connect Joint连接关节Mirror Joint镜向关节Set Preferred Angle设置参考角Assume Preferred AngleEnable IK Solvers反向动力学解算器有效EIk Handle Snap反向动力学句柄捕捉有效ESelected IK Handles反向动力学句柄有效DSelected IK Handles反向动力学句柄无效Deformations变形Edit Menbership Tool编辑成员工具Prune Membership变形成员Cluster簇变形Lattice旋转变形Sculpt造型变形Wire网格化变形Lattice旋转Sculpt造型Cluster簇Point On Curve线点造型Blend Shape混合变形Blend Shape Edit混合变形编辑Add增加Remove删除Swap交换Wire Tool网格化工具Wire Edit网格编辑Add增加Remove删除Add Holder增加定位曲线Reset重置Wire Dropoff Locator网线定位器Wrinkle Tool褶绉变形工具Edit Lattice编辑旋转Reset Lattice重置旋转Remove Lattice Tweeks恢复旋转Display I-mediate Objects显示中间物体Hide Intermediate Objects隐藏中间物体Skinning皮肤Bind Skin绑定蒙皮Detach Skin断开蒙皮Preserve Skin Groups保持皮肤组Detach Skeleton分离骨骼Detach Selected Joints分离选定关节Reattach Skeleton重新连接骨骼Reattach Selected Joints重新连接关节Create Flexor创建屈肌Reassign Bone Lattice Joint再指定骨头关节Go to Bind Pose恢复骨头绑定Point关节Aim目标Orient方向Scale缩放Geometry几何体Normal法向RenderingLighting灯光Create Ambient Light创建环境光Create Directional Light创建方向灯Create Point Light创建点光源Create Spot Light创建聚光灯Relationship Panel关系面板Light Linking Tool灯光链接工具Shading 阴影Shading Group Attributes阴影组属性Create Shading Group创建阴影组Lambert朗伯材质Phong Phong材质Blinn布林材质Other其他材质Assign Shading Group指定阴影组InitialParticleSE初始粒子系统InitialShadingGroup初始阴影组Shading Group Tool阴影组工具Texture Placement Tool纹理位移工具Render渲染Render into New Window渲染至新窗口Redo Previous Render重复上次渲染Test Resolution测试分辨率Camera Panel照相机面板Render Globals一般渲染Batch Render批渲染Cancel Batch Render取消批渲染Show Batch Render显示批渲染Dynamics动力学系统Settings设置Initial State初始状态Set For Current当前设置Set For All Dynamic设置总体动力学特性Rigid Body Solver刚体解算器Dynamics Controller动力学控制器Particle Collision Events粒子爆炸Particle Caching粒子缓冲Run-up and Cache执行缓冲Cache Current Frame缓冲当前帧Set Selected Particles设置选定粒子Dynamics On动力学开Dynamics Off动力学关Set All Particles设置所有粒子Particles All On When Run执行时粒子系统开Auto Create Rigid Body自动创建刚体Particles粒子Particle Tool粒子工具Create Emitter创建发射器Add Emitter增加发射器Add Collisions增加碰撞Add Goal增加目标Fields场Create Air创建空气动力场Create Drag创建拖动场Create Gravity创建动力场Create Newton创建牛顿场Create Radial创建辐射动力场Create Turbulence创建震荡场Create Uniform创建统一场Create Vortex创建涡流场Add Air增加空气动力场Add Newton增加牛顿场Add Radial增加辐射场Add Turbulence增加震荡场Add Uniform增加统一场Add Vortex增加涡流场Connect连接Connect to Field场连接Connect to Emitter发射器连接Connect to Collision碰撞连接Bodies柔体和刚体Create Active Rigid Body创建正刚体Create Passive Rigid Body创建负刚体Create Constraint创建约束物体Create Soft Body创建柔体Create Springs创建弹簧Set Active Key设置正向正Set Passive Key设置负向正Help帮助Product Information产品信息Help帮助。
Maya_菜单中英文对照
Maya 菜单中英文对照File文件New Scene建立新场景Open Scene打开场景Save Scene存盘场景Save Scene As改名存盘Archive 归档场景Save preference 保存首选项Optimize scene file 优化场景大小Import导入Export All导出所有Export Selection导出选定物体Export to offline file 导出到脱机文件Assign offline file 指定脱机文件View Image 查看图像View sequence 查看序列Create Reference创建引用Reference Editor引用编辑器Project Window 项目窗口Set Project 指定当前项目Recent file 最近文件Recent Project 最近项目Exit退出Edit编辑Undo撤销Redo重做Repeat重复Recent command list 最近命令列表Keys关键帧Cut Keys裁剪关键帧Copy Keys拷贝关键帧Paste Keys粘贴关键帧Delete Keys删除关键帧Delete FBIK keys 删除 FBIK关键帧Scale Keys缩放关键帧Snap Keys 捕捉关键帧Bake Simulation烘焙模拟Delete删除Delete by Type根据类型删除Delete All by Type根据类型删除所有Select tool 选择工具Lasso select tool 套索选择工具Paint selection tool 绘制选择工具Selection all 全选Deselect 取消选择Select hierarchy 选择层次Invert Selection 反选Select All by Type根据类型选择所有Quick Select Set快速选择集Duplicate复制Duplicate special 特殊复制Duplicate with transform 复制并变换Transfer attribute values 传递属性值Group成组Ungroup解成组Level of detail 细节级别Parent建立父物体Unparent解除父物体modify修改Transformation Tools变形工具Reset Transformations重置变形Freeze Transformations冻结变形Snap align objects 捕捉对齐对象Point to point 点到点2Point to 2point 2点到2点3Point to 3point3点到3点align objects 对齐对象position along curve 沿曲线放置align tool 对齐工具snap together tool 捕捉到一起工具evaluate nodes 节点求值make live 激活center pivot 居中枢轴Prefix Hierarchy Names 添加层次名称前缀Search and replace names 搜索和替换名称Add Attribute增加属性edit Attribute 编辑属性Delete Attribute 删除属性Convert 转化NURBS to Polygons NURBS转化为多边形NURBS to subdiv 到细分曲面Polygons to subdiv 多边形到细分曲面Smooth mesh preview to Polygons 平滑网格预览到多边形Polygon edges to curve 多边形边到曲面Subdiv to Polygons 细分曲面到多边形Subdiv to NURBS 细分曲面到NURBSNURBS curve to Bezier NURBS曲线到BezierBezier curve to NURBS Bezier 曲线到NURBSPaint effects to Polygons 到多边形Paint effects to NURBS 到NURBSPaint effects to curves 到曲线Texture to geometry 纹理到几何体Displacement to Polygons 置换到多边形Displacement to Polygons with history带历史fluid to Polygons 流体到多边形Npaticle to Polygons Npaticle到多边形Replace object 替换对象Paint script tool 绘制脚本工具Paint attributes tool 绘制属性工具Create 创建NURBS primitives NURBS基本体Sphere 球Cube 立方Cylinder 圆柱Cone 圆锥Plane 平面Torus 圆环Circle 圆形Square 方形Interactive creation 交互式创建Exit on completion 完成时退出Polygons primitives 多边形基本体Sphere 球Cube 立方Cylinder 圆柱Cone圆锥Plane平面Torus 圆环Prism 棱柱Pyramid 棱锥Pipe管道Helix 螺旋线Soccer ball 足球Platonic solids 柏拉图多面体Interactive creation 交互式创建Exit on completion 完成时退出Subdiv primitives 细分曲面基本体Sphere 球Cube 立方Cylinder 圆柱Cone圆锥Plane平面Torus 圆环Volume primitives 体积基本体Sphere 球Cube 立方Cone圆锥Lights 灯光Ambient Lights 环境Directional Lights 平行Point Lights 点光源Spot Lights 聚光灯Area Lights 区域光Volume Lights 体积光Cameras 摄影机Cameras摄影机Cameras and aim 摄影机和目标Cameras aim and up摄影机和目标和上方向Stereo Cameras 立体摄影机Multi Stereo rigCV Curve Tool CV曲线工具EP Curve Tool EP曲线工具Bezier Curve Too Bezier 曲线工具Pencil Curve Tool 铅笔曲线工具arc tool 弧工具Three point circular arc 3点圆弧Two point circular arc 2点圆弧Measure tool 测量工具Distance ToolParameter ToolArc length ToolText 文本Adobe illustrator object Adobe illustrator对象Construction Plane构造平面Locator 定位器Annotation 注释Empty group 空组Sets 集Set 集Partition 划分Quick select set 快速选择集Display 显示Grid 栅格Heads up display 平视显示仪Select details 选择详细信息Object details 对象详细信息Poly count 多边形计数Subdiv details 细分曲面详细信息Animation details 动画详细信息Hik details HIK细节Frame rate 帧速率Current frame 当前帧Scene timecode 场景时间码Current asset 当前资源Camera name 摄影机名称Focal length 焦距View axis 视图轴Origin axis 原点轴View cubeTool message 工具信息Ui elements ui 元素Status line 状态行Shelf 工具架Time slider 时间滑块Range slider 范围滑块Conmand line 命令行Help line 帮助行Tool box 工具箱Attribute editor 属性编辑器Tool settings 工具设置Channel box 通道盒Layer editor 层编辑器Channel box /Layer editor 通道盒和层编辑器Hide all UI elements 隐藏所有UIShow all UI elements 显示所有UIRestore all UI elements 还原所有UIHide 隐藏Hide selection 隐藏当前选择Hide unselected objects 隐藏未选定对象Hide unselected cvs 隐藏未选定cvAll 全部Hide geometry 隐藏几何体Hide kinematics 运动学Hide deformers 变形器Lights 灯光Cameras 摄影机Texture placements 纹理放置Construction Plane构造平面Fluids 流体Hair systems 头发系统Follicles 毛囊NclothsNpaticlesNrigidsDynamic constraints 动态约束Animation markers 动画标记Light manipulators 灯光操作器Camera manipulators 摄影操作器Show 显示Show selection 显示当前选择Show last hidden 显示上次隐藏项目All surface CVS 所有曲面CVAll 全部Show geometry 显示几何体Show kinematics 显示运动学Deformers 显示变形器Light 灯光Cameras 摄影机Texture placements 纹理放置Construction Plane构造平面Fluids 流体Hair systems 头发系统Follicles 毛囊NclothsNpaticlesNrigidsDynamic constraints 动态约束Animation markers 动画标记Light manipulators 灯光操作器Camera manipulators 摄影操作器Wireframe color 线框颜色Object display 对象显示Template 模板unTemplate 取消模板bounding box 边界框no bounding box 无边界框geometry 几何体no geometry 无几何体ignore hardware shader 忽略硬件着色器ues hardware shader 使用硬件着色器fast interaction 快速交互transform display 变换显示local rotation axes 局部旋转轴rotate pivots 旋转枢轴scale pivots 缩放枢轴selection handles 选择控制柄Polygons 多边形Back faceculling 背面消隐culling ooptions 消隐选项vertices 顶点vertex size 顶点大小crease vertices 折痕顶点UVSUn shared UV 未共享UVUv size UV大小Componet IDs 组件IDFace normals 面法线Vertex normals 顶点法线Tangents 切线Normals size 法线大小Standard Edges 标准边Soft/hard Edges 软边硬边Hard Edges 硬边Border Edges 边界边Crease Edges 折痕边Texture Border Edges纹理边界边Edge width 边宽度Face centers 面中心Face triangles 面三角形Non-planar Faces 非平面面Invisible Faces 不可见面Reset display 重置显示Limit to selected 限于选定对象Custom polygon display 自定义多边形显示NURBSCVSEdit points 编辑点Hulls 壳线Normals 法线Patch centers 面片中心Surface origins 曲面原点Custom 自定义Hull 壳线Rough 粗糙Medium 中等Fine 精细Custom smoothness 自定义平滑度Subdiv surfaces 细分曲面Vertices 顶点Edges 边Faces 面UVSNormals 法线UV borders UV边界Hull 壳线Rough 粗糙Medium 中等Fine 精细Animation 动画Lattice points 晶格点Lattice shape 晶格形状Joint size 关节大小IK/FK joint size IK/FK关节大小IK handle size IK控制柄大小Joint labels 关节标签Rendering 渲染Camera/lights manipulator 摄影机/灯光操作器Paint effects mesh display Paint effects网格显示Stroke display quality 笔画显示质量Window窗口General Editors通用编辑器Rendering Editors渲染编辑器Animation Editors动画编辑器Relationship editors 关系编辑器Setting /preferences 设置首选项Attribute Spread Sheet属性编辑器Outliner 大纲视图Create node 创建节点Hypergraph；hierarchy 层次Hypergraph：connections 连接paint effectsUV texture editor UV纹理编辑器Playblast 播放预览View arrangement 视图排列Saved layouts 保存的布局Save current layouts 保存当前布局Frame all in all views 在所有视图中框显所有内容Frame selection in all view 所有视图中框显当前选择Minimize application 最小化应用程序Raise main window 提升主窗口Raise application windows 提升应用程序窗口Assets 资源Create assets with transform 创建资源Add to asset 添加到资源Remove from asset 从资源移除Asset editor 资源编辑器Export proxy asset 导出代理资源Publish attributes 发布属性UnPublish attributes 取消发布属性Publish connection 发布连接Lock UnPublish attributes 锁定未发布的属性Un Lock UnPublish attributes 取消未发布的属性Publish node 发布节点Un Publish node 取消发布节点Assign template 指定模板Select asset contents 选择资源内容Advanced asset 高级资源Create 创建Node publishing 节点发布Publish as selection transform 发布为选择变换Publish parent anchor 发布父锚点Publish child anchor 发布子锚点Un Node publishing 取消节点发布unPublish as selection transform 不发布为选择变换unPublish parent anchor 不发布父锚点unPublish child anchor 不发布子锚点Set current asset 设置当前资源None 无Animate 动画Set Key 设置关键帧Set breakdown 设置受控关键点Hold current keys 保持当前关键帧Set driven key 设置受驱动关键帧Set transform key 设置变换关键帧IK/FK keys IK/FK关键帧Set blend shape target weight keys 设置混合变形目标权重关键帧Create editable motion trail创建可编辑运动轨迹Create clip 创建片段Create pose 创建姿势Ghost selected 为选定对象生成重影Un Ghost selected取消为选定对象生成重影Unghost all 全部取消重影Create animation snapshot 创建动画快照Update snapshot 更新快照Create animated sweep创建动画扫描Motion paths 运动路径Set Motion path key 设置运动路径关键帧Attach to Motion path 连接到运动路径Flow path object 流动路径对象Turntable 转台scene time warp场景时间扭曲Add scene time warp 添加场景时间扭曲Select scene time warp选择场景时间扭曲Delete scene time warp删除场景时间扭曲Enable scene time warp 启用Set time code 设置时间码Geometry cache 几何缓存Create new cache 创建新缓存Import cache 导入缓存Export cache 导出缓存Disable all caches on selected 禁用选定对象的所有缓存Enable all caches on selected 启用选定对象的所有缓存Replace cache 替换缓存Merge caches 合并缓存Delete caches 删除缓存Append to cache 附加到缓存Replace cache frame 替换缓存帧Delete cache frame 删除缓存帧Delete history ahead of cache 删除缓存之前历史Paint cache weights tool 绘制缓存权重工具Create deformers 创建变形器Blend shape 混合变形Lattice 晶格Wrap 包裹Cluster 簇Soft modification 软修改Nonlinear 非线性Bend 弯曲Flare 扩张Sine 正玄Squash 挤压Twist 扭曲Wave 波浪Sculpt deformer 雕刻变形器Jiggle deformer 抖动变形器Jiggle disk cache 抖动磁盘缓存Jiggle disk cache attributes 抖动磁盘缓存属性Wire tool 线工具Wire dropoff locator 线衰减定位器Wrinkle tool 褶皱工具Point on curve 曲线上的点Edit deformers 编辑变形器Edit membership tool 编辑成员身份工具Prune membership 删减成员身份Cluster 簇Lattice 晶格Sculpt 雕刻Wire 线Blend shape 混合变形Add 添加Remove移除Swap 交换Bake topology to targets 将拓扑烘焙到目标Edit normalization groups 编辑规格化组Lattice 晶格Reset Lattice 重置晶格Remove Lattice tweaks 移除晶格调整Wrap 包裹Add influence 添加影响Remove influence 移除影响Wire 线Add 添加Remove移除Add holder 添加限制曲线Reset 重置Show base Wire 显示基础线Parent base Wire 父基础线Display intermediate objects 显示中间对象Hide intermediate objects 隐藏中间对象Paint blend shape weights tool绘制混合变形权重工具Paint cluster weights tool 绘制簇权重工具Paint Jiggle weights tool 绘制抖动权重工具Paint Wire weights tool 绘制线权重工具Paint set membership tool 绘制集成员身份工具Export deformer weights 导出变形器权重Import deformer weights 导入变形器权重Mirror deformer weights 镜像变形器权重Skeleton 骨架Joint tool 关节工具IK handle tool IK 控制柄工具IK spline handle tool IK 样条线控制柄工具Insert handle tool 插入关节工具Reroot Skeleton 重定骨架根Remove joint 移除关节Disconnect joint 断开关节Connect joint 连接关节Mirror joint 镜像关节Orient joint 确定关节方向Joint labeling 关节标签设置Add Joint labeling 添加关节标签Toggle selected labels切换选定标签Show all labels 显示所有标签Hide all labels 隐藏所有标签Rename joints from labels 根据标签重命名标签Labels based on joint name 基于关节名称设置关节Human IKSkeleton generator 骨架生成器Characterization tool 特征工具Character controls 角色控制Set preferred angle 设置首选角度Assume preferred angle 采用首选角度Enable IK handle snap 启用IK控制柄捕捉Enable IK/FK control 启用IK控制Enable selected IK handles启用选定IK控制柄Dis Enable selected IK handles 禁用选定IK控制柄Skin 皮肤Bind Skin绑定蒙皮Smooth Bind 平滑绑定Interactive Skin Bind 交互式蒙皮绑定Rigid Bind 刚性绑定Detach Skin断开蒙皮Go to Bind Pose恢复骨头绑定Edit Smooth skin 编辑平滑蒙皮Add influence 添加影响Remove influence 移除影响Set max influence 设置最大影响Move skinned Joint tool 移动蒙皮关节工具Interactive Skin Bind tool 交互式蒙皮绑定工具Paint skin weight tool 绘制蒙皮权重Export skin weight maps 导出蒙皮权重贴图Import skin weight maps 导入蒙皮权重贴图Mirror skin weight 镜像蒙皮权重Copy skin weight 复制蒙皮权重Smooth skin weight 平滑蒙皮权重Weight hammer 权重锤Copy vertex weights 复制顶点权重Paste vertex weights 粘贴顶点权重Move weights to influence 将权重移动到影响Reset weights to default 将权重重置为默认值Prune small weights 删减小权重Remove unused influences 移动未使用影响Disable weights normalization 禁用权重规格化Enable weights normalization 启用权重规格化Enable weights post normalization 启用权重后期规格化Normalize weights 规格化权重Substitute geometry 替换几何体Edit rigid skin 编辑刚性蒙皮Create flexor 创建屈肌Copy flexor 复制屈肌Reassign bone lattice joint重新制定骨骼晶格关节Preserve skin groups保留蒙皮组Detach Skeleton分离骨架Detach selected joints 分离选定关节Reattach Skeleton 重新附加骨架Reattach selected joints 重新附加选定关节History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Rigid Bodies刚体constrain 约束Point关节Aim目标Orient方向Scale缩放Parent 父对象Geometry几何体Normal 正常Tangent 切线Point on poly 多边形上的点Closest Point 最近点Pole vecter 极向量Remove target 移除目标Set rest position 设置静止位置Modify constrained axis 修改受约束的轴Character 角色Create character set 创建角色集Create subcharacter set 创建子角色集Character mapper 角色映射器Attribute editor 属性编辑器Add to character set 添加到角色集Remove from character set 从角色集中移除Merge character sets 合并角色集Select character set node 选择角色集节点No character sets defined 未定义角色集Select character set members 选择角色集成员No character sets defined未定义角色集Set current character set设置当前角色集None 无character set editor角色集编辑器redirect 重定向muscle 肌肉muscles/bones 肌肉/骨骼muscle creator 肌肉创建器convert surface to muscle/bone 将曲面转化为肌肉/骨骼make capsule 生成胶囊make capsule with end locator 生成带有末端定位器的胶囊add end locator to capsule 为胶囊添加末端定位器generate polygon cylineders from capsule从胶囊生成多边形圆柱体delete muscle jiggle cache 删除肌肉抖动缓存fix invalid muscle object nodes 修复无效肌肉对象节点setup master muscle control 设置主肌肉控件simple muscles 简单肌肉muscle builder 肌肉构建器set muscle parameters 设置肌肉参数apply muscle spline deformer 应用肌肉样条线变形器custom muscle shapes 自定义肌肉形状reset base pose for muscle spline deformer为肌肉样条线变形器重置基本姿势apply muscle stretch deformer 应用肌肉拉伸变形器skin setup 蒙皮设置apply muscle system skin deformer 应用肌肉系统蒙皮变形器convert smooth skin to muscle system 将平滑蒙皮转化为肌肉系统re-initialize setup date on muscle system重新初始化肌肉系统上的设置数据bind fat on muscle system muscles 在肌肉系统上绑定脂肪auto fix-invalid sticky bind points 自动修复无效粘滞绑定点auto -fix deleted/ missing muscles 自动修复已删除的/缺少的肌肉safe delete history 安全删除历史disconnect all muscle objects 断开所有肌肉对象disconnect all muscle directions 断开所有肌肉方向disconnect all muscle displaces 断开所有肌肉置换disconnect all muscle smart collides断开所有肌肉智能碰撞setup for relative sticky deformation 设置相对粘滞变形set selected muscles/bones as not relative将选定的肌肉/骨骼设置为不相对set selected muscles/bones as relative e 将选定的肌肉/骨骼设置为相对muscle objects 肌肉对象connect selected muscle objects 连接选定肌肉对象dis connect selected muscle objects断开选定肌肉对象delete selected muscle objects删除选定肌肉对象reset base pose for selected muscle objects 为选定肌肉对象重置基本姿势create base for selected muscle objects 为选定肌肉对象创建基础对象re-bind sticky for selected muscle objects 为选定肌肉对象重新绑定粘滞visualize sticky bind distance for selected muscle objects 为选定肌肉对象可视化粘滞绑定距离paint muscle weights 绘制肌肉权重weighting 权重apply default weights 应用默认权重load/save weights 加载/保存权重mirror weights 镜像权重transfer weights 传递权重prune weights 删减权重direction 方向make muscle direction 生成肌肉方向connect selected muscle direction 连接选定肌肉方向dis connect selected muscle direction 断开选定肌肉方向displace 置换create muscle displace 创建肌肉置换connect selected muscle displacenodes连接选定肌肉置换节点disconnect selected muscle displace nodes断开选定肌肉置换节点connect NURBS curve to muscle displace 将NURBS曲线连接到肌肉置换disconnect NURBS curve from muscle displace 断开NURBS曲线与肌肉置换的连接create MAYA muscle shader network 创建MAYA肌肉着色器网络create mental ray mib_cmusdeshader network 创建mental ray mib_cmusdeshader 网络smart collision 智能碰撞create muscle smart collide 创建肌肉智能碰撞connect selected muscle smart collide nodes连接选定肌肉智能碰撞节点disconnect selected muscle smart collide nodes 断开选定肌肉智能碰撞节点self/multi collision 自碰撞/多对象碰撞self collision grouping 自碰撞分组apply muscle multi collide deformer 应用肌肉多碰撞变形器rig selection for keepout 装备选择对象以实现keepoutconnect muscle from keepout 将肌肉连接到keepoutdisconnect muscle from keepout 断开肌肉与keepout的连接caching 缓存set location of file cache 设置文件缓存的位置create cache 创建缓存delete node cache 删除节点缓存delete per-point skin jiggle cache 删除逐点蒙皮抖动缓存selection 选择select connected muscle objects from selected musclesystems 从选定musclesystems选择已连接的muscle objects select connected muscle directions from selected musclesystems从选定musclesystems选择已连接的muscledirectionsselect connected muscle systems fromselected muscle objects从选定muscleobjects选择已连接的muscle systemsselect connected muscle systems frommuscle directions从muscle directions选择已连接的muscle systemsbonus rigging 附加装备create muscle spline 创建肌肉样条线surface attach 曲面附加fix surface attach to allow for poly smooth修复曲面附加以允许多边形平滑polygons 多边形模块select 选择object/component 对象/组件vertex顶点edge 边face 面uvvertex face顶点面select edge loop tool 选择循环边工具select edge ring tool 选择环形边工具select border edge tool 选择边界边工具select shortest edge path tool 选择最短边路径工具convert selection 转化当前选择grow selection region 扩大选择区域shrink selection region 收缩选择区域select selection boundary 选择当前选择边界select contiguous edges 选择连续边select using constrains 使用约束选择mesh 网格combine 结合separate 分离extract 提取Booleans 布尔Union 并集Difference 差集Intersection 交集Smooth 平滑Average vertices 平均化顶点Transfer attributes 传递属性Paint Transfer attributes weights tool绘制传递属性权重工具Transfer shading sets传递着色集Clipboard actions 剪贴板操作Copy attributes 复制属性Paste attributes 粘贴属性Clear Clipboard 清空剪贴板Reduce 减少Paint reduce weight tool 绘制减少权重工具Cleanup 清理Triangulate 三角形化Quadrangulate 四边形化Fill hole 填充洞Make hole tool 生成洞工具Create polygon tool 创建多边形工具Sculpt geometry tool 雕刻几何体工具Mirror cut 镜像切割Mirror geometry 镜像几何体Editot mesh 编辑网格Keep faces together 保持面的连接性Extrude 挤出Bridge 桥接Append to polygon tool 附加到多边形工具Project curve on mesh 在网格上投影曲线Split mesh with projected curve 使用投影的曲线分割网格Cut faces tool 切割面工具Interactive split tool 交互式分割工具Insert edge loop tool 插入循环边工具Offset edge loop tool 偏移循环边工具Add divisions 添加分段Slide edge tool 滑动边工具Transform component 变换组件Flip triangle edge 翻转三角形边Spin edge forward 正向自旋边Spin edge backward 反向自旋边Poke face 刺破面Wedge face 碶形面Duplicate face 复制面Connect components 连接组件Detach component 分离组件Merge 合并Merge to center 合并到中心Collapse 收拢Merge vertex tool 合并顶点工具Merge edge tool 合并边工具Delete edge/ vertex 删除边/顶点Chamfer vertex 切角顶点Bevel 倒角Crease tool 折痕工具Remove selected 移除选定对象Remove all 移除全部Crease sets 折痕集Create crease set 创建折痕集No crease sets defined 为定义折痕集Assign invisible faces 指定不可见面Proxy 代理Subdiv proxy 细分曲面代理Remove Subdiv proxy mirror 移除细分曲面代理镜像Crease tool 折痕工具Toggle proxy display 切换代理显示Both proxy and Subdiv display 代理和细分曲面同时显示Normals 法线Vertex Normals editor tool 顶点法线编辑工具Set Vertex Normal 设置顶点法线Lock Normals 锁定法线Un Lock Normals 解除锁定法线Average Normals 平均化法线Set to face 设置为面Reverse 反向conform 一致soften edge 软化边harden edge 硬化边set normal angle 设置法线角度color 颜色prelight 预照明batch bake 批烘焙assign new vertex bake set 指定新的顶点烘焙集assign existing bake set 指定现有烘焙集edit assigned bake set 编辑指定烘焙集create empty color set 创建空颜色集delete current color set 删除当前颜色集rename current color set 重命名当前颜色集modify current current color set 修改当前颜色集color set editor 颜色集编辑器set keyframe for vertex color 为顶点颜色设置关键帧apply color 应用颜色paint vertex color tool 绘制顶点颜色工具toggle display color attribute 切换显示颜色属性color material channel 对材质通道上色none 无ambient 环境光ambient+diffuse环境光+漫反射diffuse 漫反射specular 镜面反射emission 发射material blend setting 材质混合设置overwrite 覆盖add 相加subtract 相减multiply 相乘divide相除average 平均modulate 2x 相乘再乘2per instance sharing 逐实例共享select shared instances 选择共享实例share instances 共享实例create UVS 创建UV planar mapping 平面映射cylindrical mapping 圆柱形映射spherical mapping 球形映射automatic mapping 自动映射create UVS based on camera 基于摄影机创建UVbest plane texturing tool 最佳平面纹理工具assign shader to each projection 将着色器指定给每个投影create empty UV set 创建空UV集copy UVS to UV set 将UV复制到UV集set current UV set 设置当前UV集rename current UV set 重命名当前UV集delete current UV set 删除当前UV集UV set editor UV集编辑器Per instance sharing 逐实例共享Selected shared instances 选择共享实例Share instances 共享实例Make Selected instance current 将选定实例作为当前实例Edit UVS 编辑UV Normalize 规格化Unitize 单位化Flip 翻转Rotate 旋转Layout rectangle 排布矩形Grid 栅格Align 对齐Warp image 扭曲图像Map UV border 映射UV边界Straighten UV border 拉直UV边界Relax 松弛Unfold 展开Layout 排布Cut UV edge 切割UV边Split UVS分割UVSew UV edges 缝合UV边Move and sew UV edges移动并缝合UV边Merge UVS 合并UVDelete UVS 删除UVUV texture editor uv 纹理编辑器Edit curves 编辑曲线Duplicate surface curves 复制曲面曲线Attach curves 附加曲线Detach curves 分离曲线Align curves 对齐曲线Open/close curves 开放/闭合曲线Move seam 移动接缝Cut curve 切割曲线Intersect curves 曲线相交Curve fillet 曲线圆角Insert knot 插入节Extend 延伸Extend curve延伸曲线Extend curve on surface 延伸曲面上的曲线Offset 偏移offset curve 偏移曲线offset curve on surface 偏移曲面上的曲线reverse curve direction 翻转曲线方向rebuild curve 重建曲线fit B-spline 拟合B样条线smooth curve 平滑曲线cv hardness CV硬度add points tool 添加点工具curve editing tool 曲线编辑工具project tangent 投影切线modify curves 修改曲线lock length 锁定长度un lock length 解除锁定长度straighten 拉直smooth 平滑curl 卷曲bend 弯曲scale curvature 缩放曲率Bezier curves Bezier曲线Anchor presets 锚点预设Tangent options 切线选项Selection 选择Surfaces 曲面Revolve 旋转Loft 放样Planar 平面Extrude 挤出Birall 双轨成形Boundury 边界Square 方形Bevel 倒角Bevel plus 倒角+Edit NURBS 编辑NURBSDuplicate NURBS Patches复制NURBS面片Project curve on surface 在曲面上投影曲线Intersect surfaces 曲面相交Trim tool 修建工具Untrim surfaces 取消修建曲面Booleans 布尔Attach surfaces 附加曲面Attach without moving 附加而不移动Detach surfaces 分离曲面Align surfaces 对齐曲面Open/close surfaces 打开/关闭曲面Move seam 移动接缝Insert isoparms 插入等参线Extend surfaces 延伸曲面Offset surfaces 偏移曲面Reverse surface direction 翻转曲面方向Rebuild surfaces 重建曲面Round tool 圆化工具Surface fillet 曲面圆角Stitch 缝合Sculpt geometry tool 雕刻几何体工具Surface editing 曲面编辑Selection 选择Grow cv Selection 扩大当前选择的cvShrink cv Selection 收缩当前选择的cvSelect cv Selection boundary 选择cv选择边界Select surface border 选择曲面边界Subdiv surface 细分曲面Texture 纹理Full crease edge/vertex 完全折痕边/顶点Partial crease edge/vertex 部分折痕边/顶点Un crease edge/vertex 取消折痕边/顶点Mirror 镜像Attach 附加Match topology 匹配拓扑Clean topology 清理拓扑Collapse hierarchy 收拢层次Standard mode 标准模式Polygon proxy mode 多边形代理模式Sculpt geometry tool 雕刻几何体工具Convert selection to faces 将当前选择转化为面Convert selection to edges将当前选择转化为边Convert selection to vertices将当前选择转化为顶点Convert selection to UVS 将当前选择转化为UVRefine selected components 细化选定组件Select coarser components 选择更粗糙组件Expand selected components 展开选定组件Component display level 组件显示级别Finer 更精细Coarser 更粗糙Base 基础Component display filter 组件显示过滤器All 全部Edits 编辑Particles 粒子Particle tool 粒子工具Create emitter 创建发射器Emit from object 从对象发射Use selected emitter 使用选定发射器Per-point emission rates 逐点发射速率Make collide 使碰撞Particle collision event editor 粒子碰撞事件编辑器Goal 目标Instancer 实例化器Sprite wizard精灵向导Connect to time 连接到时间Fluid effects 流体效果Create 3D container 创建3D容器Create2D container创建2D容器Add/edit contents 添加编辑内容Emitter 发射器Emit from objects 从对象发射Gradients 渐变Paint fluids tool 绘制流体工具With curve 连同曲线Initial states 初始状态Create 3D container with emitter 创建具有发射器的3D容器Create2D container with emitter 创建具有发射器的2D容器Get fluid example 获取流体示例Get ocean/pond example 获取海洋/食堂示例Ocean 海洋Create ocean 创建海洋Add preview plane 添加预览平面Create wake 创建尾迹Add ocean surfaces locator 添加海洋表面定位器Add dynamic locator 添加动力学定位器Add boat locator添加船定位器Add dynamic buoy添加动力学浮标Float selected objects 漂浮选定对象Make boats 生成船Make motor boats 生成摩托艇Pond 池塘Create Pond 创建池塘Create wake 创建尾迹Add pond surface locator 添加池塘表面定位器Add dynamic locator 添加动力学定位器Add boat locator添加船定位器Add dynamic buoy 添加动力学浮标Float selected objects 漂浮选定对象Make boats 生成船Make motor boats 生成摩托艇Extend fluid 扩展流体edit fluid resolution 编辑流体分辨率make collide 使碰撞make motion filed 生成运动场set initial state设置初始状态clear initial state 清除初始状态save state as 状态另存为fluid ncache 流体ncachecreate new cache 创建新缓存delete cache 删除缓存attach existing cache file 附加现有缓存文件disable all cache on selected 禁用选定对象的所有缓存enable all cache on selected 启用选定对象的所有缓存replace cache 替换缓存merge caches 合并缓存append to cache 附加到缓存replace cache frame 替换缓存帧delete cache frame 删除缓存帧Fields场air 空气Drug 阻力Gravity 重力Newton 牛顿Radial 镜像Turbulence 喘流Uniform 一致Vortex 漩涡Volume axis 体积轴Volume curve 体积曲线Use selected as source off filed 将选定对象作为场源Affect selected objects 影响选定对象Soft/rigid bodies 柔体/刚体Create Active Rigid Body创建主动刚体Create Passive Rigid Body创建被动刚体create nail Constraint创建钉子约束Create pin Constraint 创建固定约束create hinge Constraint 创建铰链约束create spring Constraint 创建弹簧约束create barrier Constraint 创建屏障约束set active key 设置主动关键帧set passive key 设置被动关键帧break rigid body connection 断开刚体连接create soft body 创建柔体create spring 创建弹簧paint soft body weights tool 绘制柔体权重工具effects 效果create fire 创建火create smoke 创建烟create fireworks 创建焰火create lighting 创建闪电create shatter 创建破碎create curve flow 创建曲线流create surface flow创建曲面流delete surface flow 删除曲面流solvers 结算器initial state 初始状态set for selected 为选定对象设置set for all dynamic 为所有动力学设置rigid body solver attributes 刚体结算器属性current rigid body solver 当前刚体结算器create rigid body solver 创建刚体结算器set rigid body interpenetration 创建刚体穿透set rigid body collision 创建刚体碰撞memory caching 内存缓存create particle disk cache 创建粒子磁盘缓存edit over sampling or caching setting编辑过采样或缓存设置interactive playback 交互式播放hair 头发create hair 创建头发scale hair tool 缩放头发工具paint hair follicles 绘制毛囊paint hair textures 绘制头发纹理get hair example 获取头发示例display 显示current position 当前位置start position 开始位置reset position 静止位置current and start 当前和开始current and reset 当前静止all curves 所有曲线set start position 设置开始位置set rest position 设置静止位置modify curves修改曲线create constraint 创建约束convert selection 转化当前选择assign hair system 指定头发系统make selected curves dynamic 动力学化选定曲线make collide 使碰撞assign hair constraint 指定头发约束assign paint effects brush to hair将painteffects指定给头发transplant hair 移植头发create cache 创建缓存append to cache 附加到缓存truncate cache 截断缓存delete cache 删除缓存delete entire hair system 删除整个头发系统lighting/shading 照明/着色material attributes 材质属性assign new material 指定新材质assign favorite material 指定收藏材质assign existing material 指定现有材质assign new bake set 指定新烘焙集assign existing bake set 指定现有烘焙集batch bake 批烘焙transfer maps 传递贴图make light links 生成灯光链接break light links 断开灯光链接select objects illuminated by light 选择灯光照明的对象select lights illuminating object 选择照明对象的灯光light link editor 灯光链接编辑器make shadow links 生成阴影链接break shadow links 断开阴影链接select objects shadowed by light 选择灯光使其产生阴影的对象select lights shadowing object选择使对象产生阴影的灯光texturing 纹理3D paint tool 3D绘制工具Create psd network 创建psd网络Edit psd network 编辑psd网络Update psd network更新psd网络Create texture reference object创建纹理引用对象Delete texture reference object删除纹理引用对象Select texture reference object 选择纹理引用对象NURBS texture placement tool NURBS纹理放置工具Render 渲染Render current frame 渲染当前帧Redo previous render 重做上次渲染IPR render current frame IPR渲染当前帧Redo previous IPR render 重做上次IPR渲染Test resolution 测试分辨率Run render diagnostics运行渲染诊断Set NURBS tessellation设置NURBS细分Batch render 批渲染Cancel Batch render 取消批渲染Show Batch render 显示批渲染Export pre-compositing 导出预合成Create backburner job 创建backburne作业Render using 使用以下渲染器渲染Toon 卡通Assign fill shader 指定填充着色器Solid color 纯色Light angle two tone 灯光角度双色调Shaded brightness two tone 着色亮度双色调Shaded brightness three tone 着色亮度三色调Dark profile 暗部轮廓Rim light 边缘光Circle highlight 圆形高光Assign outline 指定轮廓Create modifier 创建修改器Set camera background color 设置摄影机背景色Get toon example 获取卡通示例Reverse surfaces 反转表面Assign paint effects brush to toon lines将paint effects笔刷指定给卡通线Convert toon to polygons 将卡通线转化为多边形Paint line attributes 绘制线属性Line width 线宽度Line offset 线偏移Line opacity 线不透明度Profile color 轮廓颜色Crease color折痕颜色Border color 边界颜色Stereo 立体Editors 编辑器Create 创建Make links 创建链接Break links 断开链接Paint effectsPaint effects tool Paint effects工具Make paintable 使可绘制Get brush 获取笔刷Template brush settings 模板笔刷设置Reset template brush 重置模板笔刷Flip tube direction 反转管方向Paint on Paintable objects 在可绘制对象上绘制Paint on view plane 在视图平面上绘制Apply settings to last stroke 将设置应用于上一笔划Get settings from selected stroke 从选定笔划获取设置Apply settings to selected strokes 将设置应用于选定笔划Share one brush 共享一个笔刷Remove brush sharing 移除笔刷共享Select brush/stroke names containing 选择包含指定字符的笔划/笔划名称Create modifier 创建修改器Brush animation 笔刷动画Loop Brush animation 循环笔刷动画Make Brush spring 生成笔刷弹簧Bake spring animation 烘焙弹簧动画Curve utilities 曲线工具Simplify stroke path curves 简化笔划路径曲线Set stroke control curves 设置笔划控制曲线Attach brush to curves 将笔刷附加到曲线。
maya菜单中英文对照
maya中英文对照Maya 菜单中英文对照Standard标准菜单File文件New Scene建立新场景Open Scene打开场景Save Scene存盘场景Save Scene As改名存盘Import导入Export All导出所有Export Selection导出选定物体Create Reference引入场景文件Reference Editor引入场景编辑器Project项目New建立新项目Edit Current编辑当前项目Set指定当前项目Exit退出Edit编辑Undo取消上一次操作Redo恢复上一次操作Repeat重复最后一次操作Keys关键帧Cut Keys裁剪关键帧Copy Keys拷贝关键帧Paste Keys粘贴关键帧Delete Keys删除关键帧Scale Keys缩放关键帧Bake Simulation模拟复制Delete删除Delete by Type根据类型删除History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Rigid Bodies刚体Delete All by Type根据类型删除所有History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Unused Transforms未用变形Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Lights灯光Cameras照相机Image Planes图像板Shading Groups and Materials阴影组和材质Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Select All选择所有Select All by Type根据类型选择所有Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Transforms变形Geometry几何体NURBS Geometry NURBS几何体Polygon Geometry多边形几何体Lights灯光Cameras照相机Image Planes图像板Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Quick Select Set快速选择集Layers层New Layers建立新层Rename Layer更改层名称Remove Current Layer移去当前层Layer Editor层编辑器Transfer to Layer转化为层Select All on Layer选择层上所有物体Hide Layer隐藏层Hide All Layers隐藏所有层Show Layer显示层Show All Layers显示所有层Template Layer临时层Untemplate Layer解除临时层Hide Inactive Layers隐藏非活动层Template Inactive Layers临时非活动层Duplicate复制Group成组Ungroup解成组Create Empty Group建立空成组Parent建立父物体Unparent解除父物体Modify修改Transformation Tools变形工具Move Tool移动工具Rotate Tool旋转工具Scale Tool缩放工具Show Manipulator Tool显示手动工具Default Object Manipulator默认调节器Proportional Modi Tool比例修改工具Move Limit Tool移动限制工具Rotate Limit Tool旋转限制工具Scale Limit Tool缩放限制工具Reset Transformations重新设置变形控制Freeze Transformations冻结变形控制Enable Nodes授权动画节点All所有Maya 菜单中英文对照IK solvers逆向运动连接器Constraints约束Expressions表达式Particles粒子Rigid Bodies刚体Snapshots快照Disable Node废弃动画节点Make Live激活构造物Center Pivot置中枢轴点Prefix Hierarchy Names定义前缀Add Attribute增加属性Measure测量Distance Tool距离工具Parameter Tool参数工具Arc Length Tool弧度工具Animated Snapshot动画快照Animated Sweep由动画曲线创建几何体曲面Display显示Geometry几何体Backfaces背面Lattice Points车削点Lattice Shape车削形Local Rotation Axes局部旋转轴Rotate Pivots旋转枢轴点Scale Pivots缩放枢轴点Selection Handles选定句柄NURBS Components NURBS元素CVs CV曲线Edit Points编辑点Hulls可控点Custom定制NURBS Smoothness NURBS曲面光滑处理Hull物体外壳Rough边框质量Medium中等质量Fine精细质量Custom定制Polygon Components多边形元素Custom Polygon Display定制多边形显示Fast Interaction快速交错显示Camera/Light Manipulator照相机/灯光操作器Sound声音Joint Size关节尺寸IK Handle Size IK把手尺寸Window窗口General Editors通用编辑器Set Editor系统设置编辑器Attribute Spread Sheet属性编辑器Tool Settings工具设置Filter Action Editor滤镜动作编辑器Channel Control通道控制信息Connection Editor连接编辑器Performance Settings性能设置Script Editor Script编辑器Command Shell命令窗口Plug-in Manager滤镜管理器Rendering Editors渲染编辑器Rendering Flags渲染标记Hardware Render Buffer硬件渲染缓冲区Render View渲染视图Shading Groups Editor阴影组编辑器Texture View质地视图Shading Group Attributes阴影组属性Animation Editors动画编辑器Graph Editor图形编辑器Dope SheetBlend Shape融合形Device Editor设备编辑器Dynamic Relationships动态关系Attribute Editor属性编辑器Outliner框架Hypergraph超图形Multilister多功能渲染控制Expression Editor表达式编辑器Recent Commands当前命令Playblast播放预览View Arangement视图安排Four四分3 Top Split上三分3 Left Split左三分3 Right Split右三分3 Bottom Split底部三分2 Stacked二叠分2 Side By Side二平分Maya 菜单中英文对照Single单图Previous Arrangement前次安排Next Arrangement下次安排Saved Layouts保存布局Single Perspective View单透视图Four View四分图Persp/Graph/Hyper透视/图形/超图形Persp/Multi/Render透视/多功能/渲染Persp/Multi/Outliner透视/多功能/轮廓Persp/Multi透视/多功能Persp/Outliner透视/轮廓Persp/Graph透视/图形Persp/Set Editor透视/组编辑器Edit Layouts编辑布局Frame Selected in All Views所有视图选定帧Frame All in All Views所有视图的所有帧Minimize Application最小化应用Raise Application Windows移动窗口向前Options可选项General Preferences一般设置UI Preferences用户界面设置Customize UI定制用户界面Hotkeys快捷键Colors颜色Marking Menus标记菜单Shelves书架Panels面板Save Preferences保存设置Status Line状态栏Shelf书架Feedback Line反馈栏Channel Box通道面板Time Slider时间滑动棒Range Slider范围滑动棒Command Line命令行Help Line帮助行Show Only Viewing Panes仅显示视图面板Show All Panes显示所有面板Modeling建模系统Primitives基本物体Create NURBS创建NURBS物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Circle圆Create Polygons创建多边形物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Torus面包圈Create Text创建文本Create Locator创建指示器Construction Plane构造平面Create Camera创建照相机Curves创建曲线CV Curve Tool CV曲线工具EP Curve Tool EP曲线工具Pencil Curve Tool笔曲线工具Add Points Tool加点工具Curve Editing Tool曲线编辑工具Offset Curve曲线移动Offset Curve On Surface曲线在表面移动Project Tangent曲线切线调整Fillet Curve带状曲线Rebuild Curve重建曲线Extend Curve扩展曲线Insert Knot插入节点Attach Curves连接曲线Detach Curves断开曲线Align Curves对齐曲线Open/Close Curves打开/关闭曲线Reserse Curves反转曲线Duplicate Curves复制曲线CV Hardness硬化曲线Fit B-spline适配贝塔曲线Surfaces曲面Bevel斜角Extrude凸出Loft放样Planar曲面Revolve旋转Boundary边界Birail 1 Tool二对一工具Birail 2 Tool二对二工具Birail 3+ Tool二对三工具Circular Fillet圆边斜角Freeform Fillet自由形斜角Fillet Blend Tool斜角融合工具Edit Surfaces编辑曲面Intersect Surfaces曲面交叉Project Curve投影曲线Trim Tool修整曲线工具Untrim Surfaces撤消修整Rebuild Surfaces重建曲面Prepare For Stitch准备缝合Stitch Surface Points点缝合曲面Stitch Tool缝合工具NURBS to Polygons NURBS转化为多边形Insert Isoparms添加元素Attach Surfaces曲面结合Detach Surfaces曲面分离Align Surfaces曲面对齐Open/Close Surfaces打开/关闭曲面Reverse Surfaces反转曲面Polygones多边形Create Polygon Tool创建多边形工具Append to Polygon Tool追加多边形Split Polygon Tool分离多边形工具Move Component移动元素Subdivide多边形细化Collapse面转点Edges边界Soften/Harden柔化/硬化Close Border关闭边界Merge Tool合并工具Bevel斜角Delete and Clean删除和清除Facets面Keep Facets Together保留边线Extrude凸出Extract破碎Duplicate复制Triangulate三角分裂Quadrangulate四边形合并Trim Facet Tool面修整工具Normals法向Reverse倒转法向Propagate传播法向Conform统一法向Texture质地Assign Shader to Each Projection指定投影Planar Mapping平面贴图Cylindrical Mapping圆柱体贴图Spherical Mapping球体贴图Delete Mapping删除贴图Cut Texture裁剪纹理Sew Texture斜拉纹理Unite联合Separate分离Smooth光滑Selection Constraints选定限定工具Smart Command Settings改变显示属性Convert Selection转化选定Uninstall Current Settins解除当前设定Animation动画模块Keys关键帧Settings设置关键帧Auto Key自动设置关键帧Spline样条曲线式Linear直线式Clamped夹具式Stepped台阶式Flat平坦式Other其他形式Set Driven Key设置驱动关键帧Set设置Go To Previous前移Go To Next后退Set Key设置帧Hold Current Keys保留当前帧Paths路径Set Path Key设置路径关键帧Attach to Path指定路径Flow Path Object物体跟随路径Skeletons骨骼Joint Tool关节工具IK Handle Tool反向动力学句柄工具IK Spline Handle Tool反向动力学样条曲线句柄工具Insert Joint Tool添加关节工具Reroot Skeleton重新设置根关节Remove Joint去除关节Disconnect Joint解除连接关节Connect Joint连接关节Mirror Joint镜向关节Set Preferred Angle设置参考角Assume Preferred AngleEnable IK Solvers反向动力学解算器有效EIk Handle Snap反向动力学句柄捕捉有效ESelected IK Handles反向动力学句柄有效DSelected IK Handles反向动力学句柄无效Deformations变形Edit Menbership Tool编辑成员工具Prune Membership变形成员Cluster簇变形Lattice旋转变形Sculpt造型变形Wire网格化变形Lattice旋转Sculpt造型Cluster簇Point On Curve线点造型Blend Shape混合变形Blend Shape Edit混合变形编辑Add增加Remove删除Swap交换Wire Tool网格化工具Wire Edit网格编辑Add增加Remove删除Add Holder增加定位曲线Reset重置Wire Dropoff Locator网线定位器Wrinkle Tool褶绉变形工具Edit Lattice编辑旋转Reset Lattice重置旋转Remove Lattice Tweeks恢复旋转Display I-mediate Objects显示中间物体Hide Intermediate Objects隐藏中间物体Skinning皮肤Bind Skin绑定蒙皮Detach Skin断开蒙皮Preserve Skin Groups保持皮肤组Detach Skeleton分离骨骼Detach Selected Joints分离选定关节Reattach Skeleton重新连接骨骼Reattach Selected Joints重新连接关节Create Flexor创建屈肌Reassign Bone Lattice Joint再指定骨头关节Go to Bind Pose恢复骨头绑定Point关节Aim目标Orient方向Scale缩放Geometry几何体Normal法向RenderingLighting灯光Create Ambient Light创建环境光Create Directional Light创建方向灯Create Point Light创建点光源Create Spot Light创建聚光灯Relationship Panel关系面板Light Linking Tool灯光链接工具Shading 阴影Shading Group Attributes阴影组属性Create Shading Group创建阴影组Lambert朗伯材质Phong Phong材质Blinn布林材质Other其他材质Assign Shading Group指定阴影组InitialParticleSE初始粒子系统InitialShadingGroup初始阴影组Shading Group Tool阴影组工具Texture Placement Tool纹理位移工具Render渲染Render into New Window渲染至新窗口Redo Previous Render重复上次渲染Test Resolution测试分辨率Camera Panel照相机面板Render Globals一般渲染Batch Render批渲染Cancel Batch Render取消批渲染Show Batch Render显示批渲染Dynamics动力学系统Settings设置Initial State初始状态Set For Current当前设置Set For All Dynamic设置总体动力学特性Rigid Body Solver刚体解算器Dynamics Controller动力学控制器Particle Collision Events粒子爆炸Particle Caching粒子缓冲Run-up and Cache执行缓冲Cache Current Frame缓冲当前帧Set Selected Particles设置选定粒子Dynamics On动力学开Dynamics Off动力学关Set All Particles设置所有粒子Particles All On When Run执行时粒子系统开Auto Create Rigid Body自动创建刚体Particles粒子Particle Tool粒子工具Create Emitter创建发射器Add Emitter增加发射器Add Collisions增加碰撞Add Goal增加目标Fields场Create Air创建空气动力场Create Drag创建拖动场Create Gravity创建动力场Create Newton创建牛顿场Create Radial创建辐射动力场Create Turbulence创建震荡场Create Uniform创建统一场Create Vortex创建涡流场Add Air增加空气动力场Add Newton增加牛顿场Add Radial增加辐射场Add Turbulence增加震荡场Add Uniform增加统一场Add Vortex增加涡流场Connec t连接Connect to Field场连接Connect to Emitter发射器连接Connect to Collision碰撞连接Bodies柔体和刚体Create Active Rigid Body创建正刚体Create Passive Rigid Body创建负刚体Create Constraint创建约束物体Create Soft Body创建柔体Create Springs创建弹簧Set Active Key设置正向正Set Passive Key设置负向正Help帮助Product Information产品信息Help帮助。
玛雅MAYA软件中英文对照
reate Shading Group创建阴影组Lambert朗伯材质Phong Phong材质Blinn布林材质Other其他材质Assign Shading Group指定阴影组InitialParticleSE初始粒子系统InitialShadingGroup初始阴影组Shading Group Tool阴影组工具Texture Placement Tool纹理位移工具Render渲染Render into New Window渲染至新窗口Redo Previous Render重复上次渲染Test Resolution测试分辨率Camera Panel照相机面板Render Globals一般渲染Batch Render批渲染Cancel Batch Render取消批渲染Show Batch Render显示批渲染Dynamics动力学系统Settings设置Initial State初始状态Set For Current当前设置Set For All Dynamic设置总体动力学特性Rigid Body Solver刚体解算器Dynamics Controller动力学控制器Particle Collision Events粒子爆炸Particle Caching粒子缓冲Run-up and Cache执行缓冲Cache Current Frame缓冲当前帧Set Selected Particles设置选定粒子Dynamics On动力学开Dynamics Off动力学关Set All Particles设置所有粒子Particles All On When Run执行时粒子系统开Auto Create Rigid Body自动创建刚体Particles粒子Particle Tool粒子工具Create Emitter创建发射器Add Emitter增加发射器Add Collisions增加碰撞Add Goal增加目标Fields场Create Air创建空气动力场Create Drag创建拖动场Create Gravity创建动力场Create Newton创建牛顿场Create Radial创建辐射动力场Create Turbulence创建震荡场Create Uniform创建统一场Create Vortex创建涡流场Add Air增加空气动力场Add Newton增加牛顿场Add Radial增加辐射场Add Turbulence增加震荡场Add Uniform增加统一场Add Vortex增加涡流场Connect连接Connect to Field场连接Connect to Emitter发射器连接Connect to Collision碰撞连接Bodies柔体和刚体Create Active Rigid Body创建正刚体Create Passive Rigid Body创建负刚体Create Constraint创建约束物体Create Soft Body创建柔体Create Springs创建弹簧Set Active Key设置正向正Set Passive Key设置负向正Help帮助Product Information产品信息Help帮助New建立新项目Edit Current编辑当前项目Set指定当前项目Exit退出Edit编辑Undo取消上一次操作Redo恢复上一次操作Repeat重复最后一次操作Keys关键帧Cut Keys裁剪关键帧Copy Keys拷贝关键帧Paste Keys粘贴关键帧Delete Keys删除关键帧Scale Keys缩放关键帧Bake Simulation模拟复制Delete删除Delete by Type根据类型删除History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Rigid Bodies刚体Delete All by Type根据类型删除所有History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Unused Transforms未用变形Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Lights灯光Cameras照相机Image Planes图像板Shading Groups and Materials阴影组和材质Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Select All选择所有Select All by Type根据类型选择所有Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Transforms变形Geometry几何体NURBS Geometry NURBS几何体Polygon Geometry多边形几何体Lights灯光Cameras照相机Image Planes图像板Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Quick Select Set快速选择集Layers层New Layers建立新层Rename Layer更改层名称Remove Current Layer移去当前层Layer Editor层编辑器Transfer to Layer转化为层Select All on Layer选择层上所有物体Hide Layer隐藏层Hide All Layers隐藏所有层Show Layer显示层Show All Layers显示所有层Template Layer临时层Untemplate Layer解除临时层Hide Inactive Layers隐藏非活动层Template Inactive Layers临时非活动层Duplicate复制Group成组Ungroup解成组Create Empty Group建立空成组Parent建立父物体Unparent解除父物体Modify修改Transformation Tools变形工具Move Tool移动工具Rotate Tool旋转工具Scale Tool缩放工具Show Manipulator Tool显示手动工具Default Object Manipulator默认调节器Proportional Modi Tool比例修改工具Move Limit Tool移动限制工具Rotate Limit Tool旋转限制工具Scale Limit Tool缩放限制工具Reset Transformations重新设置变形控制Freeze Transformations冻结变形控制Enable Nodes授权动画节点All所有IK solvers逆向运动连接器Constraints约束Expressions表达式Particles粒子Rigid Bodies刚体Snapshots快照Disable Node废弃动画节点Make Live激活构造物Center Pivot置中枢轴点Prefix Hierarchy Names定义前缀Add Attribute增加属性Measure测量Distance Tool距离工具Parameter Tool参数工具Arc Length Tool弧度工具Animated Snapshot动画快照Animated Sweep由动画曲线创建几何体曲面Display显示Geometry几何体Backfaces背面Lattice Points车削点Lattice Shape车削形Local Rotation Axes局部旋转轴Rotate Pivots旋转枢轴点Scale Pivots缩放枢轴点Selection Handles选定句柄NURBS Components NURBS元素CVs CV曲线Edit Points编辑点Hulls可控点Custom定制NURBS Smoothness NURBS曲面光滑处理Hull物体外壳Rough边框质量Medium中等质量Fine精细质量Custom定制Polygon Components多边形元素Custom Polygon Display定制多边形显示Fast Interaction快速交错显示Camera/Light Manipulator照相机/灯光操作器Sound声音Joint Size关节尺寸IK Handle Size IK把手尺寸Window窗口General Editors通用编辑器Set Editor系统设置编辑器Attribute Spread Sheet属性编辑器Tool Settings工具设置Filter Action Editor滤镜动作编辑器Channel Control通道控制信息Connection Editor连接编辑器Performance Settings性能设置Script Editor Script编辑器Command Shell命令窗口Plug-in Manager滤镜管理器Rendering Editors渲染编辑器Rendering Flags渲染标记Hardware Render Buffer硬件渲染缓冲区Render View渲染视图Shading Groups Editor阴影组编辑器Texture View质地视图Shading Group Attributes阴影组属性Animation Editors动画编辑器Graph Editor图形编辑器Dope SheetBlend Shape融合形Device Editor设备编辑器Dynamic Relationships动态关系Attribute Editor属性编辑器Outliner框架Hypergraph超图形Multilister多功能渲染控制Expression Editor表达式编辑器Recent Commands当前命令Playblast播放预览View Arangement视图安排Four四分3 Top Split上三分3 Left Split左三分3 Right Split右三分3 Bottom Split底部三分2 Stacked二叠分2 Side By Side二平分Single单图Previous Arrangement前次安排Next Arrangement下次安排Saved Layouts保存布局Single Perspective View单透视图Four View四分图Persp/Graph/Hyper透视/图形/超图形Persp/Multi/Render透视/多功能/渲染Persp/Multi/Outliner透视/多功能/轮廓Persp/Multi透视/多功能Persp/Outliner透视/轮廓Persp/Graph透视/图形Persp/Set Editor透视/组编辑器Edit Layouts编辑布局Frame Selected in All Views所有视图选定帧Frame All in All Views所有视图的所有帧Minimize Application最小化应用Raise Application Windows移动窗口向前Options可选项General Preferences一般设置UI Preferences用户界面设置Customize UI定制用户界面Hotkeys快捷键Colors颜色Marking Menus标记菜单Shelves书架Panels面板Save Preferences保存设置Status Line状态栏Shelf书架Feedback Line反馈栏Channel Box通道面板Time Slider时间滑动棒Range Slider范围滑动棒Command Line命令行Help Line帮助行Show Only Viewing Panes仅显示视图面板Show All Panes显示所有面板Modeling建模系统Primitives基本物体Create NURBS创建NURBS物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Circle圆Create Polygons创建多边形物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Torus面包圈Create Text创建文本Create Locator创建指示器Construction Plane构造平面Create Camera创建照相机Curves创建曲线CV Curve Tool CV曲线工具EP Curve Tool EP曲线工具Pencil Curve Tool笔曲线工具Add Points Tool加点工具Curve Editing Tool曲线编辑工具Offset Curve曲线移动Offset Curve On Surface曲线在表面移动Project Tangent曲线切线调整Fillet Curve带状曲线Rebuild Curve重建曲线Extend Curve扩展曲线Insert Knot插入节点Attach Curves连接曲线Detach Curves断开曲线Align Curves对齐曲线Open/Close Curves打开/关闭曲线Reserse Curves反转曲线Duplicate Curves复制曲线CV Hardness硬化曲线Fit B-spline适配贝塔曲线Surfaces曲面Bevel斜角Extrude凸出Loft放样Planar曲面Revolve旋转Boundary边界Birail 1 Tool二对一工具Birail 2 Tool二对二工具Birail 3+ Tool二对三工具Circular Fillet圆边斜角Freeform Fillet自由形斜角Fillet Blend Tool斜角融合工具Edit Surfaces编辑曲面Intersect Surfaces曲面交叉Project Curve投影曲线Trim Tool修整曲线工具Untrim Surfaces撤消修整Rebuild Surfaces重建曲面Prepare For Stitch准备缝合Stitch Surface Points点缝合曲面Stitch Tool缝合工具NURBS to Polygons NURBS转化为多边形Insert Isoparms添加元素Attach Surfaces曲面结合Detach Surfaces曲面分离Align Surfaces曲面对齐Open/Close Surfaces打开/关闭曲面Reverse Surfaces反转曲面Polygones多边形Create Polygon Tool创建多边形工具Append to Polygon Tool追加多边形Split Polygon Tool分离多边形工具Move Component移动元素Subdivide多边形细化Collapse面转点Edges边界Soften/Harden柔化/硬化Close Border关闭边界Merge Tool合并工具Bevel斜角Delete and Clean删除和清除Facets面Keep Facets Together保留边线Extrude凸出Extract破碎Duplicate复制Triangulate三角分裂Quadrangulate四边形合并Trim Facet Tool面修整工具Normals法向Reverse倒转法向Propagate传播法向Conform统一法向Texture质地Assign Shader to Each Projection指定投影Planar Mapping平面贴图Cylindrical Mapping圆柱体贴图Spherical Mapping球体贴图Delete Mapping删除贴图Cut Texture裁剪纹理Sew Texture斜拉纹理Unite联合Separate分离Smooth光滑Selection Constraints选定限定工具Smart Command Settings改变显示属性Convert Selection转化选定Uninstall Current Settins解除当前设定Animation动画模块Keys关键帧Settings设置关键帧Auto Key自动设置关键帧Spline样条曲线式Linear直线式Clamped夹具式Stepped台阶式Flat平坦式Other其他形式Set Driven Key设置驱动关键帧Set设置Go To Previous前移Go To Next后退Set Key设置帧Hold Current Keys保留当前帧Paths路径Set Path Key设置路径关键帧Attach to Path指定路径Flow Path Object物体跟随路径Skeletons骨骼Joint Tool关节工具IK Handle Tool反向动力学句柄工具IK Spline Handle Tool反向动力学样条曲线句柄工具Insert Joint Tool添加关节工具Reroot Skeleton重新设置根关节Remove Joint去除关节Disconnect Joint解除连接关节Connect Joint连接关节Mirror Joint镜向关节Set Preferred Angle设置参考角Assume Preferred AngleEnable IK Solvers反向动力学解算器有效EIk Handle Snap反向动力学句柄捕捉有效ESelected IK Handles反向动力学句柄有效DSelected IK Handles反向动力学句柄无效Deformations变形Edit Menbership Tool编辑成员工具Prune Membership变形成员Cluster簇变形Lattice旋转变形Sculpt造型变形Wire网格化变形Lattice旋转Sculpt造型Cluster簇Point On Curve线点造型Blend Shape混合变形Blend Shape Edit混合变形编辑Add增加Remove删除Swap交换Wire Tool网格化工具Wire Edit网格编辑Add增加Remove删除Add Holder增加定位曲线Reset重置Wire Dropoff Locator网线定位器Wrinkle Tool褶绉变形工具Edit Lattice编辑旋转Reset Lattice重置旋转Remove Lattice Tweeks恢复旋转Display I-mediate Objects显示中间物体Hide Intermediate Objects隐藏中间物体Skinning皮肤Bind Skin绑定蒙皮Detach Skin断开蒙皮Preserve Skin Groups保持皮肤组Detach Skeleton分离骨骼Detach Selected Joints分离选定关节Reattach Skeleton重新连接骨骼Reattach Selected Joints重新连接关节Create Flexor创建屈肌Reassign Bone Lattice Joint再指定骨头关节Go to Bind Pose恢复骨头绑定Point关节Aim目标Orient方向Scale缩放Geometry几何体Normal法向RenderingLighting灯光Create Ambient Light创建环境光Create Directional Light创建方向灯Create Point Light创建点光源Create Spot Light创建聚光灯Relationship Panel关系面板Light Linking Tool灯光链接工具Shading 阴影Shading Group Attributes阴影组属性Create Shading Group创建阴影组Lambert朗伯材质Phong Phong材质Blinn布林材质Other其他材质Assign Shading Group指定阴影组InitialParticleSE初始粒子系统InitialShadingGroup初始阴影组Shading Group Tool阴影组工具Texture Placement Tool纹理位移工具Render渲染Render into New Window渲染至新窗口Redo Previous Render重复上次渲染Test Resolution测试分辨率Camera Panel照相机面板Render Globals一般渲染Batch Render批渲染Cancel Batch Render取消批渲染Show Batch Render显示批渲染Dynamics动力学系统Settings设置Initial State初始状态Set For Current当前设置Set For All Dynamic设置总体动力学特性Rigid Body Solver刚体解算器Dynamics Controller动力学控制器Particle Collision Events粒子爆炸Particle Caching粒子缓冲Run-up and Cache执行缓冲Cache Current Frame缓冲当前帧Set Selected Particles设置选定粒子Dynamics On动力学开Dynamics Off动力学关Set All Particles设置所有粒子Particles All On When Run执行时粒子系统开Auto Create Rigid Body自动创建刚体Particles粒子Particle Tool粒子工具Create Emitter创建发射器Add Emitter增加发射器Add Collisions增加碰撞Add Goal增加目标Fields场Create Air创建空气动力场Create Drag创建拖动场Create Gravity创建动力场Create Newton创建牛顿场Create Radial创建辐射动力场。
Maya软件单词中英文对照表
Maya软件单词中英文对照表大家好，我是陈丽，大家可以叫我小陈。
，最近在网上看到很多学习maya 的网友对英文版的maya比较头痛，我之前在蓝铅笔学习角色表演专业的时候，也尝试着用过英文版的maya。
其实英文版的没有我们想象中的那么难，maya就那几个区域，就那么多的功能键，只要中文的你熟练掌握了以后，英文版的也是可以灵活的运用的。
闲着没事，下面从网上收集了一些关于maya的中英文的对照表，把它们整理了出来。
希望对maya的初学者或者是对英文版maya不太熟悉的朋友能有所帮助。
Standard标准菜单File文件New Scene建立新场景Open Scene打开场景Save Scene存盘场景Save Scene As改名存盘Import导入Export All导出所有Export Selection导出选定物体Create Reference引入场景文件Reference Editor引入场景编辑器Project项目New建立新项目Edit Current编辑当前项目Set指定当前项目Exit退出Edit编辑Undo取消上一次操作Redo恢复上一次操作Repeat重复最后一次操作Keys关键帧Cut Keys裁剪关键帧Copy Keys拷贝关键帧Paste Keys粘贴关键帧Delete Keys删除关键帧Scale Keys缩放关键帧Bake Simulation模拟复制Delete删除Delete by Type根据类型删除History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Rigid Bodies刚体Delete All by Type根据类型删除所有History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Unused Transforms未用变形Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Lights灯光Cameras照相机Image Planes图像板Shading Groups and Materials阴影组和材质Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Select All选择所有Select All by Type根据类型选择所有Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Transforms变形Geometry几何体NURBS Geometry NURBS几何体Polygon Geometry多边形几何体Lights灯光Cameras照相机Image Planes图像板Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Quick Select Set快速选择集Layers层New Layers建立新层Rename Layer更改层名称Remove Current Layer移去当前层Layer Editor层编辑器Transfer to Layer转化为层Select All on Layer选择层上所有物体Hide Layer隐藏层Hide All Layers隐藏所有层Show Layer显示层Show All Layers显示所有层Template Layer临时层Untemplate Layer解除临时层Hide Inactive Layers隐藏非活动层Template Inactive Layers临时非活动层Duplicate复制Group成组Ungroup解成组Create Empty Group建立空成组Parent建立父物体Unparent解除父物体Modify修改Transformation Tools变形工具Move Tool移动工具Rotate Tool旋转工具Scale Tool缩放工具Show Manipulator Tool显示手动工具Default Object Manipulator默认调节器Proportional Modi Tool比例修改工具Move Limit Tool移动限制工具Rotate Limit Tool旋转限制工具Scale Limit Tool缩放限制工具Reset Transformations重新设置变形控制Freeze Transformations冻结变形控制Enable Nodes授权动画节点All所有IK solvers逆向运动连接器Constraints约束Expressions表达式Particles粒子Rigid Bodies刚体Snapshots快照Disable Node废弃动画节点Make Live激活构造物Center Pivot置中枢轴点Prefix Hierarchy Names定义前缀Add Attribute增加属性Measure测量Distance Tool距离工具Parameter Tool参数工具Arc Length Tool弧度工具Animated Snapshot动画快照Animated Sweep由动画曲线创建几何体曲面Display显示Geometry几何体Backfaces背面Lattice Points车削点Lattice Shape车削形Local Rotation Axes局部旋转轴Rotate Pivots旋转枢轴点Scale Pivots缩放枢轴点Selection Handles选定句柄NURBS Components NURBS元素CVs CV曲线Edit Points编辑点Hulls可控点Custom定制NURBS Smoothness NURBS曲面光滑处理Hull物体外壳Rough边框质量Medium中等质量Fine精细质量Custom定制Polygon Components多边形元素Custom Polygon Display定制多边形显示Fast Interaction快速交错显示Camera/Light Manipulator照相机/灯光操作器Sound声音Joint Size关节尺寸IK Handle Size IK把手尺寸Window窗口General Editors通用编辑器Set Editor系统设置编辑器Attribute Spread Sheet属性编辑器Tool Settings工具设置Filter Action Editor滤镜动作编辑器Channel Control通道控制信息Connection Editor连接编辑器Performance Settings性能设置script Editor script编辑器Command Shell命令窗口Plug-in Manager滤镜管理器Rendering Editors渲染编辑器Rendering Flags渲染标记Hardware Render Buffer硬件渲染缓冲区Render View渲染视图Shading Groups Editor阴影组编辑器Texture View质地视图Shading Group Attributes阴影组属性Animation Editors动画编辑器Graph Editor图形编辑器Dope SheetBlend Shape融合形Device Editor设备编辑器Dynamic Relationships动态关系Attribute Editor属性编辑器Outliner框架Hypergraph超图形Multilister多功能渲染控制Expression Editor表达式编辑器Recent Commands当前命令Playblast播放预览View Arangement视图安排Four四分3 Top Split上三分3 Left Split左三分3 Right Split右三分3 Bottom Split底部三分2 Stacked二叠分2 Side By Side二平分Single单图Previous Arrangement前次安排Next Arrangement下次安排Saved Layouts保存布局Single Perspective View单透视图Four View四分图Persp/Graph/Hyper透视/图形/超图形Persp/Multi/Render透视/多功能/渲染Persp/Multi/Outliner透视/多功能/轮廓Persp/Multi透视/多功能Persp/Outliner透视/轮廓Persp/Graph透视/图形Persp/Set Editor透视/组编辑器Edit Layouts编辑布局Frame Selected in All Views所有视图选定帧Frame All in All Views所有视图的所有帧Minimize Application最小化应用Raise Application Windows移动窗口向前Options可选项General Preferences一般设置UI Preferences用户界面设置Customize UI定制用户界面Hotkeys快捷键Colors颜色Marking Menus标记菜单Shelves书架Panels面板Save Preferences保存设置Status Line状态栏Shelf书架Feedback Line反馈栏Channel Box通道面板Time Slider时间滑动棒Range Slider范围滑动棒Command Line命令行Help Line帮助行Show Only Viewing Panes仅显示视图面板Show All Panes显示所有面板 Modeling建模系统Primitives基本物体Create NURBS创建NURBS物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Circle圆Create Polygons创建多边形物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Torus面包圈Create Text创建文本Create Locator创建指示器Construction Plane构造平面Create Camera创建照相机Curves创建曲线CV Curve Tool CV曲线工具EP Curve Tool EP曲线工具Pencil Curve Tool笔曲线工具Add Points Tool加点工具Curve Editing Tool曲线编辑工具Offset Curve曲线移动Offset Curve On Surface曲线在表面移动Project Tangent曲线切线调整Fillet Curve带状曲线Rebuild Curve重建曲线Extend Curve扩展曲线Insert Knot插入节点Attach Curves连接曲线Detach Curves断开曲线Align Curves对齐曲线Open/Close Curves打开/关闭曲线Reserse Curves反转曲线Duplicate Curves复制曲线CV Hardness硬化曲线Fit B-spline适配贝塔曲线Surfaces曲面Bevel斜角Extrude凸出Loft放样Planar曲面Revolve旋转Boundary边界Birail 1 Tool二对一工具Birail 2 Tool二对二工具Birail 3+ Tool二对三工具Circular Fillet圆边斜角Freeform Fillet自由形斜角Fillet Blend Tool斜角融合工具Edit Surfaces编辑曲面Intersect Surfaces曲面交叉Project Curve投影曲线Trim Tool修整曲线工具Untrim Surfaces撤消修整Rebuild Surfaces重建曲面Prepare For Stitch准备缝合Stitch Surface Points点缝合曲面Stitch Tool缝合工具NURBS to Polygons NURBS转化为多边形Insert Isoparms添加元素Attach Surfaces曲面结合Detach Surfaces曲面分离Align Surfaces曲面对齐Open/Close Surfaces打开/关闭曲面Reverse Surfaces反转曲面Polygones多边形Create Polygon Tool创建多边形工具Append to Polygon Tool追加多边形Split Polygon Tool分离多边形工具Move Component移动元素Subdivide多边形细化Collapse面转点Edges边界Soften/Harden柔化/硬化Close Border关闭边界Merge Tool合并工具Bevel斜角Delete and Clean删除和清除Facets面Keep Facets Together保留边线Extrude凸出Extract破碎Duplicate复制Triangulate三角分裂Quadrangulate四边形合并Trim Facet Tool面修整工具Normals法向Reverse倒转法向Propagate传播法向Conform统一法向Texture质地Assign Shader to Each Projection指定投影Planar Mapping平面贴图Cylindrical Mapping圆柱体贴图Spherical Mapping球体贴图Delete Mapping删除贴图Cut Texture裁剪纹理Sew Texture斜拉纹理Unite联合Separate分离Smooth光滑Selection Constraints选定限定工具Smart Command Settings改变显示属性Convert Selection转化选定Uninstall Current Settins解除当前设定Animation动画模块Keys关键帧Settings设置关键帧Auto Key自动设置关键帧Spline样条曲线式Linear直线式Clamped夹具式Stepped台阶式Flat平坦式Other其他形式Set Driven Key设置驱动关键帧Set设置Go To Previous前移Go To Next后退Set Key设置帧Hold Current Keys保留当前帧Paths路径Set Path Key设置路径关键帧Attach to Path指定路径Flow Path Object物体跟随路径Skeletons骨骼Joint Tool关节工具IK Handle Tool反向动力学句柄工具IK Spline Handle Tool反向动力学样条曲线句柄工具Insert Joint Tool添加关节工具Reroot Skeleton重新设置根关节Remove Joint去除关节Disconnect Joint解除连接关节Connect Joint连接关节Mirror Joint镜向关节Set Preferred Angle设置参考角Assume Preferred AngleEnable IK Solvers反向动力学解算器有效EIk Handle Snap反向动力学句柄捕捉有效ESelected IK Handles反向动力学句柄有效DSelected IK Handles反向动力学句柄无效Deformations变形Edit Menbership Tool编辑成员工具Prune Membership变形成员Cluster簇变形Lattice旋转变形Sculpt造型变形Wire网格化变形Lattice旋转Sculpt造型Cluster簇Point On Curve线点造型Blend Shape混合变形Blend Shape Edit混合变形编辑Add增加Remove删除Swap交换Wire Tool网格化工具Wire Edit网格编辑Add增加Remove删除Add Holder增加定位曲线Reset重置Wire Dropoff Locator网线定位器Wrinkle Tool褶绉变形工具Edit Lattice编辑旋转Reset Lattice重置旋转Remove Lattice Tweeks恢复旋转Display I-mediate Objects显示中间物体Hide Intermediate Objects隐藏中间物体Skinning皮肤Bind Skin绑定蒙皮Detach Skin断开蒙皮Preserve Skin Groups保持皮肤组Detach Skeleton分离骨骼Detach Selected Joints分离选定关节Reattach Skeleton重新连接骨骼Reattach Selected Joints重新连接关节Create Flexor创建屈肌Reassign Bone Lattice Joint再指定骨头关节Go to Bind Pose恢复骨头绑定Point关节Aim目标orient方向Scale缩放Geometry几何体Normal法向 RenderingLighting灯光Create Ambient Light创建环境光Create Directional Light创建方向灯Create Point Light创建点光源Create Spot Light创建聚光灯Relationship Panel关系面板Light Linking Tool灯光链接工具Shading 阴影Shading Group Attributes阴影组属性Create Shading Group创建阴影组Lambert朗伯材质Phong Phong材质Blinn布林材质Other其他材质Assign Shading Group指定阴影组InitialParticleSE初始粒子系统InitialShadingGroup初始阴影组Shading Group Tool阴影组工具Texture Placement Tool纹理位移工具Render渲染Render into New Window渲染至新窗口Redo Previous Render重复上次渲染Test Resolution测试分辨率Camera Panel照相机面板Render Globals一般渲染Batch Render批渲染Cancel Batch Render取消批渲染Show Batch Render显示批渲染Dynamics动力学系统Settings设置Initial State初始状态Set For Current当前设置Set For All Dynamic设置总体动力学特性Rigid Body Solver刚体解算器Dynamics Controller动力学控制器Particle Collision Events粒子爆炸Particle Caching粒子缓冲Run-up and Cache执行缓冲Cache Current Frame缓冲当前帧Set Selected Particles设置选定粒子Dynamics On动力学开Dynamics Off动力学关Set All Particles设置所有粒子Particles All On When Run执行时粒子系统开Auto Create Rigid Body自动创建刚体Particles粒子Particle Tool粒子工具Create Emitter创建发射器Add Emitter增加发射器Add Collisions增加碰撞Add Goal增加目标Fields场Create Air创建空气动力场Create Drag创建拖动场Create Gravity创建动力场Create Newton创建牛顿场Create Radial创建辐射动力场Create Turbulence创建震荡场Create Uniform创建统一场Create Vortex创建涡流场Add Air增加空气动力场Add Newton增加牛顿场Add Radial增加辐射场Add Turbulence增加震荡场Add Uniform增加统一场Add Vortex增加涡流场Connect连接Connect to Field场连接Connect to Emitter发射器连接Connect to Collision碰撞连接Bodies柔体和刚体Create Active Rigid Body创建正刚体Create Passive Rigid Body创建负刚体Create Constraint创建约束物体Create Soft Body创建柔体Create Springs创建弹簧Set Active Key设置正向正Set Passive Key设置负向正Standard标准菜单File文件New Scene建立新场景Open Scene打开场景Save Scene存盘场景Save Scene As改名存盘Import导入Export All导出所有Export Selection导出选定物体Create Reference引入场景文件Reference Editor引入场景编辑器Project项目New建立新项目Edit Current编辑当前项目Set指定当前项目Exit退出******************Edit编辑Undo取消上一次操作Redo恢复上一次操作Repeat重复最后一次操作Keys关键帧Cut Keys裁剪关键帧Copy Keys拷贝关键帧Paste Keys粘贴关键帧Delete Keys删除关键帧Scale Keys缩放关键帧Bake Simulation模拟复制Delete删除Delete by Type根据类型删除History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Rigid Bodies刚体Delete All by Type根据类型删除所有History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Unused Transforms未用变形Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Lights灯光Cameras照相机Image Planes图像板Shading Groups and Materials阴影组和材质Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Select All选择所有Select All by Type根据类型选择所有Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Transforms变形Geometry几何体NURBS Geometry NURBS几何体Polygon Geometry多边形几何体Lights灯光Cameras照相机Image Planes图像板Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Quick Select Set快速选择集Layers层New Layers建立新层Rename Layer更改层名称Remove Current Layer移去当前层Layer Editor层编辑器Transfer to Layer转化为层Select All on Layer选择层上所有物体Hide Layer隐藏层Hide All Layers隐藏所有层Show Layer显示层Show All Layers显示所有层Template Layer临时层Untemplate Layer解除临时层Hide Inactive Layers隐藏非活动层Template Inactive Layers临时非活动层Duplicate复制Group成组Ungroup解成组Create Empty Group建立空成组Parent建立父物体Unparent解除父物体**********************************Modify修改Transformation Tools变形工具Move Tool移动工具Rotate Tool旋转工具Scale Tool缩放工具Show Manipulator Tool显示手动工具Default Object Manipulator默认调节器Proportional Modi Tool比例修改工具Move Limit Tool移动限制工具Rotate Limit Tool旋转限制工具Scale Limit Tool缩放限制工具Reset Transformations重新设置变形控制Freeze Transformations冻结变形控制Enable Nodes授权动画节点All所有IK solvers逆向运动连接器Constraints约束Expressions表达式Particles粒子Rigid Bodies刚体Snapshots快照Disable Node废弃动画节点Make Live激活构造物Center Pivot置中枢轴点Prefix Hierarchy Names定义前缀Add Attribute增加属性Measure测量Distance Tool距离工具Parameter Tool参数工具Arc Length Tool弧度工具Animated Snapshot动画快照Animated Sweep由动画曲线创建几何体曲面*************************************Display显示Geometry几何体Backfaces背面Lattice Points车削点Lattice Shape车削形Local Rotation Axes局部旋转轴Rotate Pivots旋转枢轴点Scale Pivots缩放枢轴点Selection Handles选定句柄NURBS Components NURBS元素CVs CV曲线Edit Points编辑点Hulls可控点Custom定制NURBS Smoothness NURBS曲面光滑处理Hull物体外壳Rough边框质量Medium中等质量Fine精细质量Custom定制Polygon Components多边形元素Custom Polygon Display定制多边形显示Fast Interaction快速交错显示Camera/Light Manipulator照相机/灯光操作器Sound声音Joint Size关节尺寸IK Handle Size IK把手尺寸*******************************Window窗口General Editors通用编辑器Set Editor系统设置编辑器Attribute Spread Sheet属性编辑器Tool Settings工具设置Filter Action Editor滤镜动作编辑器Channel Control通道控制信息Connection Editor连接编辑器Performance Settings性能设置Script Editor Script编辑器Command Shell命令窗口Plug-in Manager滤镜管理器Rendering Editors渲染编辑器Rendering Flags渲染标记Hardware Render Buffer硬件渲染缓冲区Render View渲染视图Shading Groups Editor阴影组编辑器Texture View质地视图Shading Group Attributes阴影组属性Animation Editors动画编辑器Graph Editor图形编辑器Dope SheetBlend Shape融合形Device Editor设备编辑器Dynamic Relationships动态关系Attribute Editor属性编辑器Outliner框架Hypergraph超图形Multilister多功能渲染控制Expression Editor表达式编辑器Recent Commands当前命令Playblast播放预览View Arangement视图安排Four四分3 Top Split上三分3 Left Split左三分3 Right Split右三分3 Bottom Split底部三分2 Stacked二叠分2 Side By Side二平分Single单图Previous Arrangement前次安排Next Arrangement下次安排Saved Layouts保存布局Single Perspective View单透视图Four View四分图Persp/Graph/Hyper透视/图形/超图形Persp/Multi/Render透视/多功能/渲染Persp/Multi/Outliner透视/多功能/轮廓Persp/Multi透视/多功能Persp/Outliner透视/轮廓Persp/Graph透视/图形Persp/Set Editor透视/组编辑器Edit Layouts编辑布局Frame Selected in All Views所有视图选定帧Frame All in All Views所有视图的所有帧Minimize Application最小化应用Raise Application Windows移动窗口向前Options可选项General Preferences一般设置UI Preferences用户界面设置Customize UI定制用户界面Hotkeys快捷键Colors颜色Marking Menus标记菜单Shelves书架Panels面板Save Preferences保存设置Status Line状态栏Shelf书架Feedback Line反馈栏Channel Box通道面板Time Slider时间滑动棒Range Slider范围滑动棒Command Line命令行***********************************Help Line帮助行Show Only Viewing Panes仅显示视图面板Show All Panes显示所有面板Modeling建模系统Primitives基本物体Create NURBS创建NURBS物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Circle圆Create Polygons创建多边形物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Torus面包圈Create Text创建文本Create Locator创建指示器Construction Plane构造平面Create Camera创建照相机Curves创建曲线CV Curve Tool CV曲线工具EP Curve Tool EP曲线工具Pencil Curve Tool笔曲线工具Add Points Tool加点工具Curve Editing Tool曲线编辑工具Offset Curve曲线移动Offset Curve On Surface曲线在表面移动Project Tangent曲线切线调整Fillet Curve带状曲线Rebuild Curve重建曲线Extend Curve扩展曲线Insert Knot插入节点Attach Curves连接曲线Detach Curves断开曲线Align Curves对齐曲线Open/Close Curves打开/关闭曲线Reserse Curves反转曲线Duplicate Curves复制曲线CV Hardness硬化曲线Fit B-spline适配贝塔曲线****************Surfaces曲面Bevel斜角Extrude凸出Loft放样Planar曲面Revolve旋转Boundary边界Birail 1 Tool二对一工具Birail 2 Tool二对二工具Birail 3+ Tool二对三工具Circular Fillet圆边斜角Freeform Fillet***形斜角Fillet Blend Tool斜角融合工具Edit Surfaces编辑曲面Intersect Surfaces曲面交叉Project Curve投影曲线Trim Tool修整曲线工具Untrim Surfaces撤消修整Rebuild Surfaces重建曲面Prepare For Stitch准备缝合Stitch Surface Points点缝合曲面Stitch Tool缝合工具NURBS to Polygons NURBS转化为多边形Insert Isoparms添加元素Attach Surfaces曲面结合Detach Surfaces曲面分离Align Surfaces曲面对齐Open/Close Surfaces打开/关闭曲面Reverse Surfaces反转曲面Polygones多边形Create Polygon Tool创建多边形工具Append to Polygon Tool追加多边形Split Polygon Tool分离多边形工具Move Component移动元素Subdivide多边形细化Collapse面转点Edges边界Soften/Harden柔化/硬化Close Border关闭边界Merge Tool合并工具Bevel斜角Delete and Clean删除和清除Facets面Keep Facets Together保留边线Extrude凸出Extract破碎Duplicate复制Triangulate三角分裂Quadrangulate四边形合并Trim Facet Tool面修整工具Normals法向Reverse倒转法向Propagate传播法向Conform统一法向Texture质地Assign Shader to Each Projection指定投影Planar Mapping平面贴图Cylindrical Mapping圆柱体贴图Spherical Mapping球体贴图Delete Mapping删除贴图Cut Texture裁剪纹理Sew Texture斜拉纹理Unite联合Separate分离Smooth光滑Selection Constraints选定限定工具Smart Command Settings改变显示属性Convert Selection转化选定Uninstall Current Settins解除当前设定****************Animation动画模块Keys关键帧Settings设置关键帧Auto Key自动设置关键帧Spline样条曲线式Linear直线式Clamped夹具式Stepped台阶式Flat平坦式Other其他形式Set Driven Key设置驱动关键帧Set设置Go To Previous前移Go To Next后退Set Key设置帧Hold Current Keys保留当前帧Paths路径Set Path Key设置路径关键帧Attach to Path指定路径Flow Path Object物体跟随路径Skeletons骨骼Joint Tool关节工具IK Handle Tool反向动力学句柄工具IK Spline Handle Tool反向动力学样条曲线句柄工具Insert Joint Tool添加关节工具Reroot Skeleton重新设置根关节Remove Joint去除关节Disconnect Joint解除连接关节Connect Joint连接关节Mirror Joint镜向关节Set Preferred Angle设置参考角Assume Preferred AngleEnable IK Solvers反向动力学解算器有效EIk Handle Snap反向动力学句柄捕捉有效ESelected IK Handles反向动力学句柄有效DSelected IK Handles反向动力学句柄无效Deformations变形Edit Menbership Tool编辑成员工具Prune Membership变形成员Cluster簇变形Lattice旋转变形Sculpt造型变形Wire网格化变形Lattice旋转Sculpt造型Cluster簇Point On Curve线点造型Blend Shape混合变形Blend Shape Edit混合变形编辑Add增加Remove删除Swap交换Wire Tool网格化工具Wire Edit网格编辑Add增加Remove删除Add Holder增加定位曲线Reset重置Wire Dropoff Locator网线定位器Wrinkle Tool褶绉变形工具Edit Lattice编辑旋转Reset Lattice重置旋转Remove Lattice Tweeks恢复旋转Display I-mediate Objects显示中间物体Hide Intermediate Objects隐藏中间物体Skinning皮肤Bind Skin绑定蒙皮Detach Skin断开蒙皮Preserve Skin Groups保持皮肤组Detach Skeleton分离骨骼Detach Selected Joints分离选定关节Reattach Skeleton重新连接骨骼Reattach Selected Joints重新连接关节Create Flexor创建屈肌Reassign Bone Lattice Joint再指定骨头关节Go to Bind Pose恢复骨头绑定Point关节Aim目标Orient方向Scale缩放Geometry几何体Normal法向****************RenderingLighting灯光Create Ambient Light创建环境光Create Directional Light创建方向灯Create Point Light创建点光源Create Spot Light创建聚光灯Relationship Panel关系面板Light Linking Tool灯光链接工具Shading 阴影Shading Group Attributes阴影组属性Create Shading Group创建阴影组Lambert朗伯材质Phong Phong材质Blinn布林材质Other其他材质Assign Shading Group指定阴影组InitialParticleSE初始粒子系统InitialShadingGroup初始阴影组Shading Group Tool阴影组工具Texture Placement Tool纹理位移工具Render渲染Render into New Window渲染至新窗口Redo Previous Render重复上次渲染Test Resolution测试分辨率Camera Panel照相机面板Render Globals一般渲染Batch Render批渲染Cancel Batch Render取消批渲染Show Batch Render显示批渲染Dynamics动力学系统Settings设置Initial State初始状态Set For Current当前设置Set For All Dynamic设置总体动力学特性Rigid Body Solver刚体解算器Dynamics Controller动力学控制器Particle Collision Events粒子爆炸Particle Caching粒子缓冲Run-up and Cache执行缓冲Cache Current Frame缓冲当前帧Set Selected Particles设置选定粒子Dynamics On动力学开Dynamics Off动力学关Set All Particles设置所有粒子Particles All On When Run执行时粒子系统开Auto Create Rigid Body自动创建刚体Particles粒子Particle Tool粒子工具Create Emitter创建发射器Add Emitter增加发射器Add Collisions增加碰撞Add Goal增加目标Fields场Create Air创建空气动力场Create Drag创建拖动场Create Gravity创建动力场Create Newton创建牛顿场Create Radial创建辐射动力场Create Turbulence创建震荡场Create Uniform创建统一场Create Vortex创建涡流场Add Air增加空气动力场Add Newton增加牛顿场Add Radial增加辐射场Add Turbulence增加震荡场Add Uniform增加统一场Add Vortex增加涡流场Connect连接Connect to Field场连接Connect to Emitter发射器连接Connect to Collision碰撞连接Bodies柔体和刚体Create Active Rigid Body创建正刚体Create Passive Rigid Body创建负刚体Create Constraint创建约束物体Create Soft Body创建柔体Create Springs创建弹簧Set Active Key设置正向正Set Passive Key设置负向正Help帮助Product Information产品信息Help帮助。
Maya 菜单中英文对照
Maya 菜单中英文对照1.Standard标准菜单2.File文件3.New Scene建立新场景4.Open Scene打开场景5.Save Scene存盘场景6.Save Scene As改名存盘7.Import导入8.Export All导出所有9.Export Selection导出选定物体10.Create Reference引入场景文件11.Reference Editor引入场景编辑器12.Project项目13.New建立新项目14.Edit Current编辑当前项目15.Set指定当前项目16.Exit退出17.Edit编辑18.Undo取消上一次操作19.Redo恢复上一次操作20.Repeat重复最后一次操作21.Keys关键帧22.Cut Keys裁剪关键帧23.Copy Keys拷贝关键帧24.Paste Keys粘贴关键帧25.Delete Keys删除关键帧26.Scale Keys缩放关键帧27.Bake Simulation模拟复制28.Delete删除29.Delete by Type根据类型删除30.History构造历史31.Channels通道32.Static Channels静帧通道33.Motion Paths运动路径34.Expressions表达式35.Constraints约束36.Rigid Bodies刚体37.Delete All by Type根据类型删除所有38.History构造历史39.Channels通道40.Static Channels静帧通道41.Motion Paths运动路径42.Expressions表达式43.Constraints约束44.Unused Transforms未用变形45.Joints连接46.IK Handles逆向运动控制柄ttices车削48.Clusters族49.Sculpt Objects雕刻物体50.Wires网格51.Lights灯光52.Cameras照相机53.Image Planes图像板54.Shading Groups and Materials阴影组和材质55.Particles粒子56.Rigid Bodies刚体物体57.Rigid Constraints刚体约束58.Select All选择所有59.Select All by Type根据类型选择所有60.Joints连接61.IK Handles逆向运动控制柄ttices车削63.Clusters族64.Sculpt Objects雕刻物体65.Wires网格66.Transforms变形67.Geometry几何体68.NURBS Geometry NURBS几何体69.Polygon Geometry多边形几何体70.Lights灯光71.Cameras照相机72.Image Planes图像板73.Particles粒子74.Rigid Bodies刚体物体75.Rigid Constraints刚体约束76.Quick Select Set快速选择集yers层78.New Layers建立新层79.Rename Layer更改层名称80.Remove Current Layer移去当前层yer Editor层编辑器82.Transfer to Layer转化为层83.Select All on Layer选择层上所有物体84.Hide Layer隐藏层85.Hide All Layers隐藏所有层86.Show Layer显示层87.Show All Layers显示所有层88.Template Layer临时层89.Untemplate Layer解除临时层90.Hide Inactive Layers隐藏非活动层91.Template Inactive Layers临时非活动层92.Duplicate复制93.Group成组94.Ungroup解成组95.Create Empty Group建立空成组96.Parent建立父物体97.Unparent解除父物体98.Modify修改99.Transformation Tools变形工具100.Move Tool移动工具101.Rotate Tool旋转工具102.Scale Tool缩放工具103.Show Manipulator Tool显示手动工具104.Default Object Manipulator默认调节器105.Proportional Modi Tool比例修改工具106.Move Limit Tool移动限制工具107.Rotate Limit Tool旋转限制工具108.Scale Limit Tool缩放限制工具109.Reset Transformations重新设置变形控制110.Freeze Transformations冻结变形控制111.Enable Nodes授权动画节点112.All所有113.IK solvers逆向运动连接器114.Constraints约束115.Expressions表达式116.Particles粒子117.Rigid Bodies刚体118.Snapshots快照119.Disable Node废弃动画节点120.Make Live激活构造物121.Center Pivot置中枢轴点122.Prefix Hierarchy Names定义前缀123.Add Attribute增加属性124.Measure测量125.Distance Tool距离工具126.Parameter Tool参数工具127.Arc Length Tool弧度工具128.Animated Snapshot动画快照129.Animated Sweep由动画曲线创建几何体曲面130.Display显示131.Geometry几何体132.Backfaces背面ttice Points车削点ttice Shape车削形135.Local Rotation Axes局部旋转轴136.Rotate Pivots旋转枢轴点137.Scale Pivots缩放枢轴点138.Selection Handles选定句柄139.NURBS Components NURBS元素140.CVs CV曲线141.Edit Points编辑点142.Hulls可控点143.Custom定制144.NURBS Smoothness NURBS曲面光滑处理145.Hull物体外壳146.Rough边框质量147.Medium中等质量148.Fine精细质量149.Custom定制150.Polygon Components多边形元素151.Custom Polygon Display定制多边形显示152.Fast Interaction快速交错显示153.Camera/Light Manipulator照相机/灯光操作器154.Sound声音155.Joint Size关节尺寸156.IK Handle Size IK把手尺寸157.Window窗口158.General Editors通用编辑器159.Set Editor系统设置编辑器160.Attribute Spread Sheet属性编辑器161.Tool Settings工具设置162.Filter Action Editor滤镜动作编辑器163.Channel Control通道控制信息164.Connection Editor连接编辑器165.Performance Settings性能设置166.Script Editor Script编辑器mand Shell命令窗口168.Plug-in Manager滤镜管理器169.Rendering Editors渲染编辑器170.Rendering Flags渲染标记171.Hardware Render Buffer硬件渲染缓冲区172.Render View渲染视图173.Shading Groups Editor阴影组编辑器174.Texture View质地视图175.Shading Group Attributes阴影组属性176.Animation Editors动画编辑器177.Graph Editor图形编辑器178.Dope Sheet179.Blend Shape融合形180.Device Editor设备编辑器181.Dynamic Relationships动态关系182.Attribute Editor属性编辑器183.Outliner框架184.Hypergraph超图形185.Multilister多功能渲染控制186.Expression Editor表达式编辑器187.Recent Commands当前命令188.Playblast播放预览189.View Arangement视图安排190.Four四分191.3 Top Split上三分192.3 Left Split左三分193.3 Right Split右三分194.3 Bottom Split底部三分195.2 Stacked二叠分196.2 Side By Side二平分197.Single单图198.Previous Arrangement前次安排199.Next Arrangement下次安排200.Saved Layouts保存布局201.Single Perspective View单透视图202.Four View四分图203.Persp/Graph/Hyper透视/图形/超图形204.Persp/Multi/Render透视/多功能/渲染205.Persp/Multi/Outliner透视/多功能/轮廓206.Persp/Multi透视/多功能207.Persp/Outliner透视/轮廓208.Persp/Graph透视/图形209.Persp/Set Editor透视/组编辑器210.Edit Layouts编辑布局211.Frame Selected in All Views所有视图选定帧212.Frame All in All Views所有视图的所有帧213.Minimize Application最小化应用214.Raise Application Windows移动窗口向前215.Options可选项216.General Preferences一般设置217.UI Preferences用户界面设置218.Customize UI定制用户界面219.Hotkeys快捷键220.Colors颜色221.Marking Menus标记菜单222.Shelves书架223.Panels面板224.Save Preferences保存设置225.Status Line状态栏226.Shelf书架227.Feedback Line反馈栏228.Channel Box通道面板229.Time Slider时间滑动棒230.Range Slider范围滑动棒mand Line命令行232.Help Line帮助行233.Show Only Viewing Panes仅显示视图面板234.Show All Panes显示所有面板235.Modeling建模系统236.Primitives基本物体237.Create NURBS创建NURBS物体238.Sphere球体239.Cube立方体240.Cylinder圆柱体241.Cone圆台（锥）体242.Plane平面物体243.Circle圆244.Create Polygons创建多边形物体245.Sphere球体246.Cube立方体247.Cylinder圆柱体248.Cone圆台（锥）体249.Plane平面物体250.Torus面包圈251.Create Text创建文本252.Create Locator创建指示器253.Construction Plane构造平面254.Create Camera创建照相机255.Curves创建曲线256.CV Curve Tool CV曲线工具257.EP Curve Tool EP曲线工具258.Pencil Curve Tool笔曲线工具259.Add Points Tool加点工具260.Curve Editing Tool曲线编辑工具261.Offset Curve曲线移动262.Offset Curve On Surface曲线在表面移动263.Project Tangent曲线切线调整264.Fillet Curve带状曲线265.Rebuild Curve重建曲线266.Extend Curve扩展曲线267.Insert Knot插入节点268.Attach Curves连接曲线269.Detach Curves断开曲线270.Align Curves对齐曲线271.Open/Close Curves打开/关闭曲线272.Reserse Curves反转曲线273.Duplicate Curves复制曲线274.CV Hardness硬化曲线275.Fit B-spline适配贝塔曲线276.Surfaces曲面277.Bevel斜角278.Extrude凸出279.Loft放样280.Planar曲面281.Revolve旋转282.Boundary边界283.Birail 1 Tool二对一工具284.Birail 2 Tool二对二工具285.Birail 3+ Tool二对三工具286.Circular Fillet圆边斜角287.Freeform Fillet自由形斜角288.Fillet Blend Tool斜角融合工具289.Edit Surfaces编辑曲面290.Intersect Surfaces曲面交叉291.Project Curve投影曲线292.Trim Tool修整曲线工具293.Untrim Surfaces撤消修整294.Rebuild Surfaces重建曲面295.Prepare For Stitch准备缝合296.Stitch Surface Points点缝合曲面297.Stitch Tool缝合工具298.NURBS to Polygons NURBS转化为多边形299.Insert Isoparms添加元素300.Attach Surfaces曲面结合301.Detach Surfaces曲面分离302.Align Surfaces曲面对齐303.Open/Close Surfaces打开/关闭曲面304.Reverse Surfaces反转曲面305.Polygones多边形306.Create Polygon Tool创建多边形工具307.Append to Polygon Tool追加多边形308.Split Polygon Tool分离多边形工具309.Move Component移动元素310.Subdivide多边形细化311.Collapse面转点312.Edges边界313.Soften/Harden柔化/硬化314.Close Border关闭边界315.Merge Tool合并工具316.Bevel斜角317.Delete and Clean删除和清除318.Facets面319.Keep Facets Together保留边线320.Extrude凸出321.Extract破碎322.Duplicate复制323.Triangulate三角分裂324.Quadrangulate四边形合并325.Trim Facet Tool面修整工具326.Normals法向327.Reverse倒转法向328.Propagate传播法向329.Conform统一法向330.Texture质地331.Assign Shader to Each Projection指定投影332.Planar Mapping平面贴图333.Cylindrical Mapping圆柱体贴图334.Spherical Mapping球体贴图335.Delete Mapping删除贴图336.Cut Texture裁剪纹理337.Sew Texture斜拉纹理338.Unite联合339.Separate分离340.Smooth光滑341.Selection Constraints选定限定工具342.Smart Command Settings改变显示属性343.Convert Selection转化选定344.Uninstall Current Settins解除当前设定345.Animation动画模块346.Keys关键帧347.Settings设置关键帧348.Auto Key自动设置关键帧349.Spline样条曲线式350.Linear直线式351.Clamped夹具式352.Stepped台阶式353.Flat平坦式354.Other其他形式355.Set Driven Key设置驱动关键帧356.Set设置357.Go To Previous前移358.Go To Next后退359.Set Key设置帧360.Hold Current Keys保留当前帧361.Paths路径362.Set Path Key设置路径关键帧363.Attach to Path指定路径364.Flow Path Object物体跟随路径365.Skeletons骨骼366.Joint Tool关节工具367.IK Handle Tool反向动力学句柄工具368.IK Spline Handle Tool反向动力学样条曲线句柄工具369.Insert Joint Tool添加关节工具370.Reroot Skeleton重新设置根关节371.Remove Joint去除关节372.Disconnect Joint解除连接关节373.Connect Joint连接关节374.Mirror Joint镜向关节375.Set Preferred Angle设置参考角376.Assume Preferred Angle377.Enable IK Solvers反向动力学解算器有效378.EIk Handle Snap反向动力学句柄捕捉有效379.ESelected IK Handles反向动力学句柄有效380.DSelected IK Handles反向动力学句柄无效381.Deformations变形382.Edit Menbership Tool编辑成员工具383.Prune Membership变形成员384.Cluster簇变形ttice旋转变形386.Sculpt造型变形387.Wire网格化变形ttice旋转389.Sculpt造型390.Cluster簇391.Point On Curve线点造型392.Blend Shape混合变形393.Blend Shape Edit混合变形编辑394.Add增加395.Remove删除396.Swap交换397.Wire Tool网格化工具398.Wire Edit网格编辑399.Add增加400.Remove删除401.Add Holder增加定位曲线402.Reset重置403.Wire Dropoff Locator网线定位器404.Wrinkle Tool褶绉变形工具405.Edit Lattice编辑旋转406.Reset Lattice重置旋转407.Remove Lattice Tweeks恢复旋转408.Display I-mediate Objects显示中间物体409.Hide Intermediate Objects隐藏中间物体410.Skinning皮肤411.Bind Skin绑定蒙皮412.Detach Skin断开蒙皮413.Preserve Skin Groups保持皮肤组414.Detach Skeleton分离骨骼415.Detach Selected Joints分离选定关节416.Reattach Skeleton重新连接骨骼417.Reattach Selected Joints重新连接关节418.Create Flexor创建屈肌419.Reassign Bone Lattice Joint再指定骨头关节420.Go to Bind Pose恢复骨头绑定421.Point关节422.Aim目标423.Orient方向424.Scale缩放425.Geometry几何体426.Normal法向427.Rendering428.Lighting灯光429.Create Ambient Light创建环境光430.Create Directional Light创建方向灯431.Create Point Light创建点光源432.Create Spot Light创建聚光灯433.Relationship Panel关系面板434.Light Linking Tool灯光链接工具435.Shading 阴影436.Shading Group Attributes阴影组属性437.Create Shading Group创建阴影组mbert朗伯材质439.Phong Phong材质440.Blinn布林材质441.Other其他材质442.Assign Shading Group指定阴影组443.InitialParticleSE初始粒子系统444.InitialShadingGroup初始阴影组445.Shading Group Tool阴影组工具446.Texture Placement Tool纹理位移工具447.Render渲染448.Render into New Window渲染至新窗口449.Redo Previous Render重复上次渲染450.Test Resolution测试分辨率451.Camera Panel照相机面板452.Render Globals一般渲染453.Batch Render批渲染454.Cancel Batch Render取消批渲染455.Show Batch Render显示批渲染456.Dynamics动力学系统457.Settings设置458.Initial State初始状态459.Set For Current当前设置460.Set For All Dynamic设置总体动力学特性461.Rigid Body Solver刚体解算器462.Dynamics Controller动力学控制器463.Particle Collision Events粒子爆炸464.Particle Caching粒子缓冲465.Run-up and Cache执行缓冲466.Cache Current Frame缓冲当前帧467.Set Selected Particles设置选定粒子468.Dynamics On动力学开469.Dynamics Off动力学关470.Set All Particles设置所有粒子471.Particles All On When Run执行时粒子系统开472.Auto Create Rigid Body自动创建刚体473.Particles粒子474.Particle Tool粒子工具475.Create Emitter创建发射器476.Add Emitter增加发射器477.Add Collisions增加碰撞478.Add Goal增加目标479.Fields场480.Create Air创建空气动力场481.Create Drag创建拖动场482.Create Gravity创建动力场483.Create Newton创建牛顿场484.Create Radial创建辐射动力场485.Create Turbulence创建震荡场486.Create Uniform创建统一场487.Create V ortex创建涡流场488.Add Air增加空气动力场489.Add Newton增加牛顿场490.Add Radial增加辐射场491.Add Turbulence增加震荡场492.Add Uniform增加统一场493.Add Vortex增加涡流场494.Connect连接495.Connect to Field场连接496.Connect to Emitter发射器连接497.Connect to Collision碰撞连接498.Bodies柔体和刚体499.Create Active Rigid Body创建正刚体500.Create Passive Rigid Body创建负刚体501.Create Constraint创建约束物体502.Create Soft Body创建柔体503.Create Springs创建弹簧504.Set Active Key设置正向正505.Set Passive Key设置负向正506.Help帮助507.Product Information产品信息508.Help帮助。
Maya 菜单中英文对照
Maya 菜单中英文对照1.Standard标准菜单2.File文件3.New Scene建立新场景4.Open Scene打开场景5.Save Scene存盘场景6.Save Scene As改名存盘7.Import导入8.Export All导出所有9.Export Selection导出选定物体10.Create Reference引入场景文件11.Reference Editor引入场景编辑器12.Project项目13.New建立新项目14.Edit Current编辑当前项目15.Set指定当前项目16.Exit退出17.Edit编辑18.Undo取消上一次操作19.Redo恢复上一次操作20.Repeat重复最后一次操作21.Keys关键帧22.Cut Keys裁剪关键帧23.Copy Keys拷贝关键帧24.Paste Keys粘贴关键帧25.Delete Keys删除关键帧26.Scale Keys缩放关键帧27.Bake Simulation模拟复制28.Delete删除29.Delete by Type根据类型删除30.History构造历史31.Channels通道32.Static Channels静帧通道33.Motion Paths运动路径34.Expressions表达式35.Constraints约束36.Rigid Bodies刚体37.Delete All by Type根据类型删除所有38.History构造历史39.Channels通道40.Static Channels静帧通道41.Motion Paths运动路径42.Expressions表达式43.Constraints约束44.Unused Transforms未用变形45.Joints连接46.IK Handles逆向运动控制柄ttices车削48.Clusters族49.Sculpt Objects雕刻物体50.Wires网格51.Lights灯光52.Cameras照相机53.Image Planes图像板54.Shading Groups and Materials阴影组和材质55.Particles粒子56.Rigid Bodies刚体物体57.Rigid Constraints刚体约束58.Select All选择所有59.Select All by Type根据类型选择所有60.Joints连接61.IK Handles逆向运动控制柄ttices车削63.Clusters族64.Sculpt Objects雕刻物体65.Wires网格66.Transforms变形67.Geometry几何体68.NURBS Geometry NURBS几何体69.Polygon Geometry多边形几何体70.Lights灯光71.Cameras照相机72.Image Planes图像板73.Particles粒子74.Rigid Bodies刚体物体75.Rigid Constraints刚体约束76.Quick Select Set快速选择集yers层78.New Layers建立新层79.Rename Layer更改层名称80.Remove Current Layer移去当前层yer Editor层编辑器82.Transfer to Layer转化为层83.Select All on Layer选择层上所有物体84.Hide Layer隐藏层85.Hide All Layers隐藏所有层86.Show Layer显示层87.Show All Layers显示所有层88.Template Layer临时层89.Untemplate Layer解除临时层90.Hide Inactive Layers隐藏非活动层91.Template Inactive Layers临时非活动层92.Duplicate复制93.Group成组94.Ungroup解成组95.Create Empty Group建立空成组96.Parent建立父物体97.Unparent解除父物体98.Modify修改99.Transformation Tools变形工具100.Move Tool移动工具101.Rotate Tool旋转工具102.Scale Tool缩放工具103.Show Manipulator Tool显示手动工具104.Default Object Manipulator默认调节器105.Proportional Modi Tool比例修改工具106.Move Limit Tool移动限制工具107.Rotate Limit Tool旋转限制工具108.Scale Limit Tool缩放限制工具109.Reset Transformations重新设置变形控制110.Freeze Transformations冻结变形控制111.Enable Nodes授权动画节点112.All所有113.IK solvers逆向运动连接器114.Constraints约束115.Expressions表达式116.Particles粒子117.Rigid Bodies刚体118.Snapshots快照119.Disable Node废弃动画节点120.Make Live激活构造物121.Center Pivot置中枢轴点122.Prefix Hierarchy Names定义前缀123.Add Attribute增加属性124.Measure测量125.Distance Tool距离工具126.Parameter Tool参数工具127.Arc Length Tool弧度工具128.Animated Snapshot动画快照- 3 -129.Animated Sweep由动画曲线创建几何体曲面130.Display显示131.Geometry几何体132.Backfaces背面ttice Points车削点ttice Shape车削形135.Local Rotation Axes局部旋转轴136.Rotate Pivots旋转枢轴点137.Scale Pivots缩放枢轴点138.Selection Handles选定句柄139.NURBS Components NURBS元素140.CVs CV曲线141.Edit Points编辑点142.Hulls可控点143.Custom定制144.NURBS Smoothness NURBS曲面光滑处理145.Hull物体外壳146.Rough边框质量147.Medium中等质量148.Fine精细质量149.Custom定制150.Polygon Components多边形元素151.Custom Polygon Display定制多边形显示152.Fast Interaction快速交错显示153.Camera/Light Manipulator照相机/灯光操作器154.Sound声音155.Joint Size关节尺寸156.IK Handle Size IK把手尺寸157.Window窗口158.General Editors通用编辑器159.Set Editor系统设置编辑器160.Attribute Spread Sheet属性编辑器161.Tool Settings工具设置162.Filter Action Editor滤镜动作编辑器163.Channel Control通道控制信息164.Connection Editor连接编辑器165.Performance Settings性能设置166.Script Editor Script编辑器mand Shell命令窗口168.Plug-in Manager滤镜管理器169.Rendering Editors渲染编辑器170.Rendering Flags渲染标记171.Hardware Render Buffer硬件渲染缓冲区172.Render View渲染视图173.Shading Groups Editor阴影组编辑器174.Texture View质地视图175.Shading Group Attributes阴影组属性176.Animation Editors动画编辑器177.Graph Editor图形编辑器178.Dope Sheet179.Blend Shape融合形180.Device Editor设备编辑器181.Dynamic Relationships动态关系182.Attribute Editor属性编辑器183.Outliner框架184.Hypergraph超图形185.Multilister多功能渲染控制186.Expression Editor表达式编辑器187.Recent Commands当前命令188.Playblast播放预览189.View Arangement视图安排190.Four四分191.3 Top Split上三分192.3 Left Split左三分193.3 Right Split右三分194.3 Bottom Split底部三分195.2 Stacked二叠分196.2 Side By Side二平分197.Single单图198.Previous Arrangement前次安排199.Next Arrangement下次安排200.Saved Layouts保存布局201.Single Perspective View单透视图202.Four View四分图203.Persp/Graph/Hyper透视/图形/超图形204.Persp/Multi/Render透视/多功能/渲染205.Persp/Multi/Outliner透视/多功能/轮廓206.Persp/Multi透视/多功能207.Persp/Outliner透视/轮廓208.Persp/Graph透视/图形209.Persp/Set Editor透视/组编辑器210.Edit Layouts编辑布局211.Frame Selected in All Views所有视图选定帧212.Frame All in All Views所有视图的所有帧213.Minimize Application最小化应用214.Raise Application Windows移动窗口向前215.Options可选项216.General Preferences一般设置- 5 -217.UI Preferences用户界面设置218.Customize UI定制用户界面219.Hotkeys快捷键220.Colors颜色221.Marking Menus标记菜单222.Shelves书架223.Panels面板224.Save Preferences保存设置225.Status Line状态栏226.Shelf书架227.Feedback Line反馈栏228.Channel Box通道面板229.Time Slider时间滑动棒230.Range Slider范围滑动棒mand Line命令行232.Help Line帮助行233.Show Only Viewing Panes仅显示视图面板234.Show All Panes显示所有面板235.Modeling建模系统236.Primitives基本物体237.Create NURBS创建NURBS物体238.Sphere球体239.Cube立方体240.Cylinder圆柱体241.Cone圆台（锥）体242.Plane平面物体243.Circle圆244.Create Polygons创建多边形物体245.Sphere球体246.Cube立方体247.Cylinder圆柱体248.Cone圆台（锥）体249.Plane平面物体250.Torus面包圈251.Create Text创建文本252.Create Locator创建指示器253.Construction Plane构造平面254.Create Camera创建照相机255.Curves创建曲线256.CV Curve Tool CV曲线工具257.EP Curve Tool EP曲线工具258.Pencil Curve Tool笔曲线工具259.Add Points Tool加点工具260.Curve Editing Tool曲线编辑工具261.Offset Curve曲线移动262.Offset Curve On Surface曲线在表面移动263.Project Tangent曲线切线调整264.Fillet Curve带状曲线265.Rebuild Curve重建曲线266.Extend Curve扩展曲线267.Insert Knot插入节点268.Attach Curves连接曲线269.Detach Curves断开曲线270.Align Curves对齐曲线271.Open/Close Curves打开/关闭曲线272.Reserse Curves反转曲线273.Duplicate Curves复制曲线274.CV Hardness硬化曲线275.Fit B-spline适配贝塔曲线276.Surfaces曲面277.Bevel斜角278.Extrude凸出279.Loft放样280.Planar曲面281.Revolve旋转282.Boundary边界283.Birail 1 Tool二对一工具284.Birail 2 Tool二对二工具285.Birail 3+ Tool二对三工具286.Circular Fillet圆边斜角287.Freeform Fillet自由形斜角288.Fillet Blend Tool斜角融合工具289.Edit Surfaces编辑曲面290.Intersect Surfaces曲面交叉291.Project Curve投影曲线292.Trim Tool修整曲线工具293.Untrim Surfaces撤消修整294.Rebuild Surfaces重建曲面295.Prepare For Stitch准备缝合296.Stitch Surface Points点缝合曲面297.Stitch Tool缝合工具298.NURBS to Polygons NURBS转化为多边形299.Insert Isoparms添加元素300.Attach Surfaces曲面结合301.Detach Surfaces曲面分离302.Align Surfaces曲面对齐- 7 -303.Open/Close Surfaces打开/关闭曲面304.Reverse Surfaces反转曲面305.Polygones多边形306.Create Polygon Tool创建多边形工具307.Append to Polygon Tool追加多边形308.Split Polygon Tool分离多边形工具309.Move Component移动元素310.Subdivide多边形细化311.Collapse面转点312.Edges边界313.Soften/Harden柔化/硬化314.Close Border关闭边界315.Merge Tool合并工具316.Bevel斜角317.Delete and Clean删除和清除318.Facets面319.Keep Facets Together保留边线320.Extrude凸出321.Extract破碎322.Duplicate复制323.Triangulate三角分裂324.Quadrangulate四边形合并325.Trim Facet Tool面修整工具326.Normals法向327.Reverse倒转法向328.Propagate传播法向329.Conform统一法向330.Texture质地331.Assign Shader to Each Projection指定投影332.Planar Mapping平面贴图333.Cylindrical Mapping圆柱体贴图334.Spherical Mapping球体贴图335.Delete Mapping删除贴图336.Cut Texture裁剪纹理337.Sew Texture斜拉纹理338.Unite联合339.Separate分离340.Smooth光滑341.Selection Constraints选定限定工具342.Smart Command Settings改变显示属性343.Convert Selection转化选定344.Uninstall Current Settins解除当前设定345.Animation动画模块346.Keys关键帧347.Settings设置关键帧348.Auto Key自动设置关键帧349.Spline样条曲线式350.Linear直线式351.Clamped夹具式352.Stepped台阶式353.Flat平坦式354.Other其他形式355.Set Driven Key设置驱动关键帧356.Set设置357.Go To Previous前移358.Go To Next后退359.Set Key设置帧360.Hold Current Keys保留当前帧361.Paths路径362.Set Path Key设置路径关键帧363.Attach to Path指定路径364.Flow Path Object物体跟随路径365.Skeletons骨骼366.Joint Tool关节工具367.IK Handle Tool反向动力学句柄工具368.IK Spline Handle Tool反向动力学样条曲线句柄工具369.Insert Joint Tool添加关节工具370.Reroot Skeleton重新设置根关节371.Remove Joint去除关节372.Disconnect Joint解除连接关节373.Connect Joint连接关节374.Mirror Joint镜向关节375.Set Preferred Angle设置参考角376.Assume Preferred Angle377.Enable IK Solvers反向动力学解算器有效378.EIk Handle Snap反向动力学句柄捕捉有效379.ESelected IK Handles反向动力学句柄有效380.DSelected IK Handles反向动力学句柄无效381.Deformations变形382.Edit Menbership Tool编辑成员工具383.Prune Membership变形成员384.Cluster簇变形ttice旋转变形386.Sculpt造型变形387.Wire网格化变形ttice旋转389.Sculpt造型- 9 -390.Cluster簇391.Point On Curve线点造型392.Blend Shape混合变形393.Blend Shape Edit混合变形编辑394.Add增加395.Remove删除396.Swap交换397.Wire Tool网格化工具398.Wire Edit网格编辑399.Add增加400.Remove删除401.Add Holder增加定位曲线402.Reset重置403.Wire Dropoff Locator网线定位器404.Wrinkle Tool褶绉变形工具405.Edit Lattice编辑旋转406.Reset Lattice重置旋转407.Remove Lattice Tweeks恢复旋转408.Display I-mediate Objects显示中间物体409.Hide Intermediate Objects隐藏中间物体410.Skinning皮肤411.Bind Skin绑定蒙皮412.Detach Skin断开蒙皮413.Preserve Skin Groups保持皮肤组414.Detach Skeleton分离骨骼415.Detach Selected Joints分离选定关节416.Reattach Skeleton重新连接骨骼417.Reattach Selected Joints重新连接关节418.Create Flexor创建屈肌419.Reassign Bone Lattice Joint再指定骨头关节420.Go to Bind Pose恢复骨头绑定421.Point关节422.Aim目标423.Orient方向424.Scale缩放425.Geometry几何体426.Normal法向427.Rendering428.Lighting灯光429.Create Ambient Light创建环境光430.Create Directional Light创建方向灯431.Create Point Light创建点光源432.Create Spot Light创建聚光灯433.Relationship Panel关系面板434.Light Linking Tool灯光链接工具435.Shading 阴影436.Shading Group Attributes阴影组属性437.Create Shading Group创建阴影组mbert朗伯材质439.Phong Phong材质440.Blinn布林材质441.Other其他材质442.Assign Shading Group指定阴影组443.InitialParticleSE初始粒子系统444.InitialShadingGroup初始阴影组445.Shading Group Tool阴影组工具446.Texture Placement Tool纹理位移工具447.Render渲染448.Render into New Window渲染至新窗口449.Redo Previous Render重复上次渲染450.Test Resolution测试分辨率451.Camera Panel照相机面板452.Render Globals一般渲染453.Batch Render批渲染454.Cancel Batch Render取消批渲染455.Show Batch Render显示批渲染456.Dynamics动力学系统457.Settings设置458.Initial State初始状态459.Set For Current当前设置460.Set For All Dynamic设置总体动力学特性461.Rigid Body Solver刚体解算器462.Dynamics Controller动力学控制器463.Particle Collision Events粒子爆炸464.Particle Caching粒子缓冲465.Run-up and Cache执行缓冲466.Cache Current Frame缓冲当前帧467.Set Selected Particles设置选定粒子468.Dynamics On动力学开469.Dynamics Off动力学关470.Set All Particles设置所有粒子471.Particles All On When Run执行时粒子系统开472.Auto Create Rigid Body自动创建刚体473.Particles粒子- 11 -474.Particle Tool粒子工具475.Create Emitter创建发射器476.Add Emitter增加发射器477.Add Collisions增加碰撞478.Add Goal增加目标479.Fields场480.Create Air创建空气动力场481.Create Drag创建拖动场482.Create Gravity创建动力场483.Create Newton创建牛顿场484.Create Radial创建辐射动力场485.Create Turbulence创建震荡场486.Create Uniform创建统一场487.Create V ortex创建涡流场488.Add Air增加空气动力场489.Add Newton增加牛顿场490.Add Radial增加辐射场491.Add Turbulence增加震荡场492.Add Uniform增加统一场493.Add Vortex增加涡流场494.Connect连接495.Connect to Field场连接496.Connect to Emitter发射器连接497.Connect to Collision碰撞连接498.Bodies柔体和刚体499.Create Active Rigid Body创建正刚体500.Create Passive Rigid Body创建负刚体501.Create Constraint创建约束物体502.Create Soft Body创建柔体503.Create Springs创建弹簧504.Set Active Key设置正向正505.Set Passive Key设置负向正506.Help帮助507.Product Information产品信息508.Help帮助。
Maya菜单中英文对照
MarkingMenus标记菜单
Shelves书架
Panels面板
SavePreferences保存设置
StatusLine状态栏
Shelf书架
FeedbackLine反馈栏
ChannelBox通道面板
TimeSlider时间滑动棒
RangeSlider范围滑动棒
Maya菜单中英文对照
Standard标准菜单
File文件
NewScene建立新场景
OpenScene打开场景
SaveScene存盘场景
SaveSceneAs改名存盘
Import导入
ExportAll导出所有
ExportSelection导出选定物体
CreateReference引入场景文件
CVsCV曲线
EditPoints编辑点
s可控点
Custom定制
NURBSSmoothnessNURBS曲面光滑处理
Hull物体外壳
Rough边框质量
Medium中等质量
Fine精细质量
Custom定制
PolygonComponents多边形元素
IKHandles逆向运动控制柄
Lattices车削
Clusters族
SculptObjects雕刻物体
Wires网格
Transforms变形
Geometry几何体
NURBSGeometryNURBS几何体
PolygonGeometry多边形几何体
Lights灯光
ShadingGroupsEditor阴影组编辑器
TextureView质地视图
Maya 菜单中英文对照
Maya 菜單中英文對照Standard標準菜單File文件New Scene建立新場景Open Scene打開場景Save Scene存檔場景Save Scene As改名存檔Import導入Export All導出所有Export Selection導出選定物體Create Reference引入場景文件Reference Editor引入場景編輯器Project項目New建立新專案Edit Current編輯當前項目Set指定當前專案Exit退出Edit編輯Undo取消上一次操作Redo恢復上一次操作Repeat重複最後一次操作Keys關鍵幀Cut Keys裁剪關鍵幀Copy Keys拷貝關鍵幀Paste Keys粘貼關鍵幀Delete Keys刪除關鍵幀Scale Keys縮放關鍵幀Bake Simulation模擬複製Delete刪除Delete by Type根據類型刪除History構造歷史Channels通道Static Channels靜幀通道Motion Paths運動路徑Expressions運算式Constraints約束Rigid Bodies剛體Delete All by Type根據類型刪除所有History構造歷史Channels通道Static Channels靜幀通道Motion Paths運動路徑Expressions運算式Constraints約束Unused Transforms未用變形Joints連接IK Handles逆向運動控制柄Lattices車削Clusters族Sculpt Objects雕刻物體Wires網格Lights燈光Cameras照相機Image Planes圖像板Shading Groups and Materials陰影組和材質Particles粒子Rigid Bodies剛體物體Rigid Constraints剛體約束Select All選擇所有Select All by Type根據類型選擇所有Joints連接IK Handles逆向運動控制柄Lattices車削Clusters族Sculpt Objects雕刻物體Wires網格Transforms變形Geometry幾何體NURBS Geometry NURBS幾何體Polygon Geometry多邊形幾何體Lights燈光Cameras照相機Image Planes圖像板Particles粒子Rigid Bodies剛體物體Rigid Constraints剛體約束Quick Select Set快速選擇集Layers層New Layers建立新層Rename Layer更改層名稱Remove Current Layer移去當前層Layer Editor層編輯器Transfer to Layer轉化為層Select All on Layer選擇層上所有物體Hide Layer隱藏層Hide All Layers隱藏所有層Show Layer顯示層Show All Layers顯示所有層Template Layer臨時層Untemplate Layer解除臨時層Hide Inactive Layers隱藏非活動層Template Inactive Layers臨時非活動層Duplicate複製Group成組Ungroup解成組Create Empty Group建立空成組Parent建立父物體Unparent解除父物體Modify修改Transformation Tools變形工具Move Tool移動工具Rotate Tool旋轉工具Scale Tool縮放工具Show Manipulator Tool顯示手動工具Default Object Manipulator默認調節器Proportional Modi Tool比例修改工具Move Limit Tool移動限制工具Rotate Limit Tool旋轉限制工具Scale Limit Tool縮放限制工具Reset Transformations重新設置變形控制Freeze Transformations凍結變形控制Enable Nodes授權動畫節點All所有IK solvers逆向運動連接器Constraints約束Expressions運算式Particles粒子Rigid Bodies剛體Snapshots快照Disable Node廢棄動畫節點Make Live啟動構造物Center Pivot置中樞軸點Prefix Hierarchy Names定義首碼Add Attribute增加屬性Measure測量Distance Tool距離工具Parameter Tool參數工具Arc Length Tool弧度工具Animated Snapshot動畫快照Animated Sweep由動畫曲線創建幾何體曲面Display顯示Geometry幾何體Backfaces背面Lattice Points車削點Lattice Shape車削形Local Rotation Axes局部旋轉軸Rotate Pivots旋轉樞軸點Scale Pivots縮放樞軸點Selection Handles選定控制碼NURBS Components NURBS元素CVs CV曲線Edit Points編輯點Hulls可控點Custom定制NURBS Smoothness NURBS曲面光滑處理Hull物體外殼Rough邊框品質Medium中等品質Fine精細品質Custom定制Polygon Components多邊形元素Custom Polygon Display定制多邊形顯示Fast Interaction快速交錯顯示Camera/Light Manipulator照相機/燈光操作器Sound聲音Joint Size關節尺寸IK Handle Size IK把手尺寸Window窗口General Editors通用編輯器Set Editor系統設置編輯器Attribute Spread Sheet屬性編輯器Tool Settings工具設置Filter Action Editor濾鏡動作編輯器Channel Control通道控制資訊Connection Editor連接編輯器Performance Settings性能設置Script Editor Script編輯器Command Shell命令窗口Plug-in Manager濾鏡管理器Rendering Editors渲染編輯器Rendering Flags渲染標記Hardware Render Buffer硬體渲染緩衝區Render View渲染視圖Shading Groups Editor陰影組編輯器Texture View質地視圖Shading Group Attributes陰影組屬性Animation Editors動畫編輯器Graph Editor圖形編輯器Dope SheetBlend Shape融合形Device Editor設備編輯器Dynamic Relationships動態關係Attribute Editor屬性編輯器Outliner框架Hypergraph超圖形Multilister多功能渲染控制Expression Editor運算式編輯器Recent Commands當前命令Playblast播放預覽View Arangement視圖安排Four四分3 Top Split上三分3 Left Split左三分3 Right Split右三分3 Bottom Split底部三分2 Stacked二疊分2 Side By Side二平分Single單圖Previous Arrangement前次安排Next Arrangement下次安排Saved Layouts保存佈局Single Perspective View單透視圖Four View四分圖Persp/Graph/Hyper透視/圖形/超圖形Persp/Multi/Render透視/多功能/渲染Persp/Multi/Outliner透視/多功能/輪廓Persp/Multi透視/多功能Persp/Outliner透視/輪廓Persp/Graph透視/圖形Persp/Set Editor透視/組編輯器Edit Layouts編輯佈局Frame Selected in All Views所有視圖選定幀Frame All in All Views所有視圖的所有幀Minimize Application最小化應用Raise Application Windows移動視窗向前Options可選項General Preferences一般設置UI Preferences用戶介面設置Customize UI定制用戶介面Hotkeys快捷鍵Colors顏色Marking Menus標記功能表Shelves書架Panels面板Save Preferences保存設置Status Line狀態欄Shelf書架Feedback Line回饋欄Channel Box通道面板Time Slider時間滑動棒Range Slider範圍滑動棒Command Line命令行Help Line説明行Show Only Viewing Panes僅顯示視圖面板Show All Panes顯示所有面板Modeling建模系統Primitives基本物體Create NURBS創建NURBS物體Sphere球體Cube立方體Cylinder圓柱體Cone圓臺（錐）體Plane平面物體Circle圓Create Polygons創建多邊形物體Sphere球體Cube立方體Cylinder圓柱體Cone圓臺（錐）體Plane平面物體Torus麵包圈Create Text創建文本Create Locator創建指示器Construction Plane構造平面Create Camera創建照相機Curves創建曲線CV Curve Tool CV曲線工具EP Curve Tool EP曲線工具Pencil Curve Tool筆曲線工具Add Points Tool加點工具Curve Editing Tool曲線編輯工具Offset Curve曲線移動Offset Curve On Surface曲線在表面移動Project Tangent曲線切線調整Fillet Curve帶狀曲線Rebuild Curve重建曲線Extend Curve擴展曲線Insert Knot插入節點Attach Curves連接曲線Detach Curves斷開曲線Align Curves對齊曲線Open/Close Curves打開/關閉曲線Reserse Curves反轉曲線Duplicate Curves複製曲線CV Hardness硬化曲線Fit B-spline適配貝塔曲線Surfaces曲面Bevel斜角Extrude凸出Loft放樣Planar曲面Revolve旋轉Boundary邊界Birail 1 Tool二對一工具Birail 2 Tool二對二工具Birail 3+ Tool二對三工具Circular Fillet圓邊斜角Freeform Fillet自由形斜角Fillet Blend Tool斜角融合工具Edit Surfaces編輯曲面Intersect Surfaces曲面交叉Project Curve投影曲線Trim Tool修整曲線工具Untrim Surfaces撤銷修整Rebuild Surfaces重建曲面Prepare For Stitch準備縫合Stitch Surface Points點縫合曲面Stitch Tool縫合工具NURBS to Polygons NURBS轉化為多邊形Insert Isoparms添加元素Attach Surfaces曲面結合Detach Surfaces曲面分離Align Surfaces曲面對齊Open/Close Surfaces打開/關閉曲面Reverse Surfaces反轉曲面Polygones多邊形Create Polygon Tool創建多邊形工具Append to Polygon Tool追加多邊形Split Polygon Tool分離多邊形工具Move Component移動元素Subdivide多邊形細化Collapse面轉點Edges邊界Soften/Harden柔化/硬化Close Border關閉邊界Merge Tool合併工具Bevel斜角Delete and Clean刪除和清除Facets面Keep Facets Together保留邊線Extrude凸出Extract破碎Duplicate複製Triangulate三角分裂Quadrangulate四邊形合併Trim Facet Tool面修整工具Normals法向Reverse倒轉法向Propagate傳播法向Conform統一法向Texture質地Assign Shader to EachProjection指定投影Planar Mapping平面貼圖Cylindrical Mapping圓柱體貼圖Spherical Mapping球體貼圖Delete Mapping刪除貼圖Cut Texture裁剪紋理Sew Texture斜拉紋理Unite聯合Separate分離Smooth光滑Selection Constraints選定限定工具Smart Command Settings改變顯示屬性Convert Selection轉化選定Uninstall Current Settins解除當前設定Animation動畫模組Keys關鍵幀Settings設置關鍵幀Auto Key自動設置關鍵幀Spline樣條曲線式Linear直線式Clamped夾具式Stepped臺階式Flat平坦式Other其他形式Set Driven Key設置驅動關鍵幀Set設置Go To Previous前移Go To Next後退Set Key設置幀Hold Current Keys保留當前幀Paths路徑Set Path Key設置路徑關鍵幀Attach to Path指定路徑Flow Path Object物體跟隨路徑Skeletons骨骼Joint Tool關節工具IK Handle Tool反向動力學控制碼工具IK Spline Handle Tool反向動力學樣條曲線控制碼工具Insert Joint Tool添加關節工具Reroot Skeleton重新設置根關節Remove Joint去除關節Disconnect Joint解除連接關節Connect Joint連接關節Mirror Joint鏡向關節Set Preferred Angle設置參考角Assume Preferred Angle Enable IK Solvers反向動力學解算器有效EIk Handle Snap反向動力學控制碼捕捉有效ESelected IK Handles反向動力學控制碼有效DSelected IK Handles反向動力學控制碼無效Deformations變形Edit Menbership Tool編輯成員工具Prune Membership變形成員Cluster簇變形Lattice旋轉變形Sculpt造型變形Wire網格化變形Lattice旋轉Sculpt造型Cluster簇Point On Curve線點造型Blend Shape混合變形Blend Shape Edit混合變形編輯Add增加Remove刪除Swap交換Wire Tool網格化工具Wire Edit網格編輯Add增加Remove刪除Add Holder增加定位曲線Reset重置Wire Dropoff Locator網線定位器Wrinkle Tool褶縐變形工具Edit Lattice編輯旋轉Reset Lattice重置旋轉Remove Lattice Tweeks恢復旋轉Display I-mediate Objects顯示中間物體Hide Intermediate Objects隱藏中間物體Skinning皮膚Bind Skin綁定蒙皮Detach Skin斷開蒙皮Preserve Skin Groups保持皮膚組Detach Skeleton分離骨骼Detach Selected Joints分離選定關節Reattach Skeleton重新連接骨骼Reattach Selected Joints重新連接關節Create Flexor創建屈肌Reassign Bone Lattice Joint再指定骨頭關節Go to Bind Pose恢復骨頭綁定Point關節Aim目標Orient方向Scale縮放Geometry幾何體Normal法向RenderingLighting燈光Create Ambient Light創建環境光Create Directional Light創建方向燈Create Point Light創建點光源Create Spot Light創建聚光燈Relationship Panel關係面板Light Linking Tool燈光鏈結工具Shading 陰影Shading Group Attributes陰影組屬性Create Shading Group創建陰影組Lambert朗伯材質Phong Phong材質Blinn布林材質Other其他材質Assign Shading Group指定陰影組InitialParticleSE初始粒子系統InitialShadingGroup初始陰影組Shading Group Tool陰影組工具Texture Placement Tool紋理位移工具Render渲染Render into New Window渲染至新窗口Redo Previous Render重複上次渲染Test Resolution測試解析度Camera Panel照相機面板Render Globals一般渲染Batch Render批渲染Cancel Batch Render取消批渲染Show Batch Render顯示批渲染Dynamics動力學系統Settings設置Initial State初始狀態Set For Current當前設置Set For All Dynamic設置總體動力學特性Rigid Body Solver剛體解算器Dynamics Controller動力學控制器Particle Collision Events粒子爆炸Particle Caching粒子緩衝Run-up and Cache執行緩衝Cache Current Frame緩衝當前幀Set Selected Particles設置選定粒子Dynamics On動力學開Dynamics Off動力學關Set All Particles設置所有粒子Particles All On When Run執行時粒子系統開Auto Create Rigid Body自動創建剛體Particles粒子Particle Tool粒子工具Create Emitter創建發射器Add Emitter增加發射器Add Collisions增加碰撞Add Goal增加目標Fields場Create Air創建空氣動力場Create Drag創建拖動場Create Gravity創建動力場Create Newton創建牛頓場Create Radial創建輻射動力場Create Turbulence創建震盪場Create Uniform創建統一場Create V ortex創建渦流場Add Air增加空氣動力場Add Newton增加牛頓場Add Radial增加輻射場Add Turbulence增加震盪場Add Uniform增加統一場Add V ortex增加渦流場Connect連接Connect to Field場連接Connect to Emitter發射器連接Connect to Collision碰撞連接Bodies柔體和剛體Create Active Rigid Body創建正剛體Create Passive Rigid Body創建負剛體Create Constraint創建約束物體Create Soft Body創建柔體Create Springs創建彈簧Set Active Key設置正向正Set Passive Key設置負向正Help説明。
Maya菜单中英文对照
Maya菜单中英文对照(全) Standard标准菜单File文件New Scene建立新场景Open Scene打开场景Save Scene存盘场景Save Scene As改名存盘Import导入Export All导出所有Export Selection导出选定物体Create Reference引入场景文件Reference Editor引入场景编辑器Project项目New建立新项目Edit Current编辑当前项目Set指定当前项目Exit退出Edit编辑Undo取消上一次操作Redo恢复上一次操作Repeat重复最后一次操作Keys关键帧Delete删除Delete by Type根据类型删除Delete All byType根据类型删除所有Quick Select Set快速选择集Layers层New Layers建立新层Rename Layer更改层名称Remove Current Layer移去当前层Layer Editor层编辑器Duplicate复制Group成组Ungroup解成组Create Empty Group建立空成组Parent建立父物体Unparent解除父物体Modify修改Transformation Tools变形工具Move Tool移动工具Rotate Tool旋转工具Scale Tool缩放工具Show Manipulat Tool显示手动工具Default ObjectManipulat默认调节器Proportional ModiTool比例修改工具Move Limit Tool移动限制工具Rotate Limit Tool旋转限制工具Scale Limit Tool缩放限制工具Reset Transform重新设置变形控制Freeze Transformatio冻结变形控制Enable Nodes授权动画节点Center Pivot置中枢轴点Prefix Hierarchy Names定义前缀Add Attribute增加属性Measure测量Distance Tool距离工具Parameter Tool参数工具Arc Length Tool弧度工具Animated Snapshot动画快照Animated Sweep由动画曲线创建几何体曲面Display显示Geometry几何体Backfaces背面Lattice Points车削点Lattice Shape车削形Local Rotation Axes局部旋转轴Rotate Pivots旋转枢轴点Scale Pivots缩放枢轴点Selection Handles选定句柄NURBS Components NURBS元素CVs CV曲线Edit Points编辑点Hulls可控点Custom定制NURBS Smoothness NURBS曲面光滑处理Hull物体外壳Rough边框质量Medium中等质量Fine精细质量Custom定制Polygon Components多边形元素Custom Polygon Display定制多边形显示Fast Interaction快速交错显示Camera/Light Manipulator照相机/灯光操作器Sound声音Joint Size关节尺寸IK Handle Size IK把手尺寸Window窗口General Editors通用编辑器Set Editor系统设置编辑器Attribute Spread Sheet属性编辑器Tool Settings工具设置Filter Action Editor滤镜动作编辑器Channel Control通道控制信息Connection Editor连接编辑器Performance Settings性能设置Script Editor Script编辑器Command Shell命令窗口Plug-in Manager滤镜管理器Rendering Editors渲染编辑器Rendering Flags渲染标记Hardware Render Buffer硬件渲染缓冲区Render View渲染视图Shading Groups Editor阴影组编辑器Texture View质地视图Shading Group Attributes阴影组属性Animation Editors动画编辑器Graph Editor图形编辑器Dope SheetBlend Shape融合形Device Editor设备编辑器Dynamic Relationships动态关系Attribute Editor属性编辑器Outliner框架Hypergraph超图形Multilister多功能渲染控制Expression Editor表达式编辑器Recent Commands当前命令Playblast播放预览View Arangement视图安排Four四分3 Top Split上三分3 Left Split左三分3 Right Split右三分3 Bottom Split底部三分2 Stacked二叠分2 Side By Side二平分Single单图Previous Arrangement前次安排Next Arrangement下次安排Saved Layouts保存布局Single Perspective View单透视图Four View四分图Persp/Graph/Hyper透视/图形/超图形Persp/Multi/Render透视/多功能/渲染Persp/Multi/Outliner透视/多功能/轮廓Persp/Multi透视/多功能Persp/Outliner透视/轮廓Persp/Graph透视/图形Persp/Set Editor透视/组编辑器Edit Layouts编辑布局Frame Selected in All Views所有视图选定帧Frame All in All Views所有视图的所有帧Minimize Application最小化应用Raise Application Windows移动窗口向前Options可选项General Preferences一般设置UI Preferences用户界面设置Customize UI定制用户界面Hotkeys快捷键Colors颜色Marking Menus标记菜单Shelves书架Panels面板Save Preferences保存设置Status Line状态栏Shelf书架Feedback Line反馈栏Channel Box通道面板Time Slider时间滑动棒Range Slider范围滑动棒Command Line命令行Help Line帮助行Show Only Viewing Panes仅显示视图面板Show All Panes显示所有面板Modeling建模系统Primitives基本物体Create NURBS创建NURBS物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Circle圆Create Polygons创建多边形物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Torus面包圈Create Text创建文本Create Locator创建指示器Construction Plane构造平面Create Camera创建照相机Curves创建曲线CV Curve Tool CV曲线工具EP Curve Tool EP曲线工具Pencil Curve Tool笔曲线工具Add Points Tool加点工具Curve Editing Tool曲线编辑工具Offset Curve曲线移动Offset Curve On Surface曲线在表面移动Project Tangent曲线切线调整Fillet Curve带状曲线Rebuild Curve重建曲线Extend Curve扩展曲线Insert Knot插入节点Attach Curves连接曲线Detach Curves断开曲线Align Curves对齐曲线Open/Close Curves打开/关闭曲线Reserse Curves反转曲线Duplicate Curves复制曲线CV Hardness硬化曲线Fit B-spline适配贝塔曲线Surfaces曲面Bevel斜角Extrude凸出Loft放样Planar曲面Revolve旋转Boundary边界Birail 1 Tool二对一工具Birail 2 Tool二对二工具Birail 3+ Tool二对三工具Circular Fillet圆边斜角Freeform Fillet***形斜角Fillet Blend Tool斜角融合工具Edit Surfaces编辑曲面Intersect Surfaces曲面交叉Project Curve投影曲线Trim Tool修整曲线工具Untrim Surfaces撤消修整Rebuild Surfaces重建曲面Prepare For Stitch准备缝合Stitch Surface Points点缝合曲面Stitch Tool缝合工具NURBS to Polygons NURBS转化为多边形Insert Isoparms添加元素Attach Surfaces曲面结合Detach Surfaces曲面分离Align Surfaces曲面对齐Open/Close Surfaces打开/关闭曲面Reverse Surfaces反转曲面Polygones多边形Create Polygon Tool创建多边形工具Append to Polygon Tool追加多边形Split Polygon Tool分离多边形工具Move Component移动元素Subdivide多边形细化Collapse面转点Edges边界Soften/Harden柔化/硬化Close Border关闭边界Merge Tool合并工具Bevel斜角Delete and Clean删除和清除Facets面Keep Facets Together保留边线Extrude凸出Extract破碎Duplicate复制Triangulate三角分裂Quadrangulate四边形合并Trim Facet Tool面修整工具Normals法向Reverse倒转法向Propagate传播法向Conform统一法向Texture质地Assign Shader to Each Projection指定投影Planar Mapping平面贴图Cylindrical Mapping圆柱体贴图Spherical Mapping球体贴图Delete Mapping删除贴图Cut Texture裁剪纹理Sew Texture斜拉纹理Unite联合Separate分离Smooth光滑Selection Constraints选定限定工具Smart Command Settings改变显示属性Convert Selection转化选定Uninstall Current Settins解除当前设定Animation动画模块Keys关键帧Settings设置关键帧Auto Key自动设置关键帧Spline样条曲线式Linear直线式Clamped夹具式Stepped台阶式Flat平坦式Other其他形式Set Driven Key设置驱动关键帧Set设置Go To Previous前移Go To Next后退Set Key设置帧Hold Current Keys保留当前帧Paths路径Set Path Key设置路径关键帧Attach to Path指定路径Flow Path Object物体跟随路径Skeletons骨骼Joint Tool关节工具IK Handle Tool反向动力学句柄工具IK Spline Handle Tool反向动力学样条曲线句柄工具Insert Joint Tool添加关节工具Reroot Skeleton重新设置根关节Remove Joint去除关节Disconnect Joint解除连接关节Connect Joint连接关节Mirror Joint镜向关节Set Preferred Angle设置参考角Assume Preferred AngleEnable IK Solvers反向动力学解算器有效EIk Handle Snap反向动力学句柄捕捉有效ESelected IK Handles反向动力学句柄有效DSelected IK Handles反向动力学句柄无效Deformations变形Edit Menbership Tool编辑成员工具Prune Membership变形成员Cluster簇变形Lattice旋转变形Sculpt造型变形Wire网格化变形Lattice旋转Sculpt造型Cluster簇Point On Curve线点造型Blend Shape混合变形Blend Shape Edit混合变形编辑Add增加Remove删除Swap交换Wire Tool网格化工具Wire Edit网格编辑Add增加Remove删除Add Holder增加定位曲线Reset重置Wire Dropoff Locator网线定位器Wrinkle Tool褶绉变形工具Edit Lattice编辑旋转Reset Lattice重置旋转Remove Lattice Tweeks恢复旋转Display I-mediate Objects显示中间物体Hide Intermediate Objects隐藏中间物体Skinning皮肤Bind Skin绑定蒙皮Detach Skin断开蒙皮Preserve Skin Groups保持皮肤组Detach Skeleton分离骨骼Detach Selected Joints分离选定关节Reattach Skeleton重新连接骨骼Reattach Selected Joints重新连接关节Create Flexor创建屈肌Reassign Bone Lattice Joint再指定骨头关节Go to Bind Pose恢复骨头绑定Point关节Aim目标Orient方向Scale缩放Geometry几何体Normal法向RenderingLighting灯光Create Ambient Light创建环境光Create Directional Light创建方向灯Create Point Light创建点光源Create Spot Light创建聚光灯Relationship Panel关系面板Light Linking Tool灯光链接工具Shading 阴影Shading Group Attributes阴影组属性Create Shading Group创建阴影组Lambert朗伯材质Phong Phong材质Blinn布林材质Other其他材质Assign Shading Group指定阴影组InitialParticleSE初始粒子系统InitialShadingGroup初始阴影组Shading Group Tool阴影组工具Texture Placement Tool纹理位移工具Render渲染Render into New Window渲染至新窗口Redo Previous Render重复上次渲染Test Resolution测试分辨率Camera Panel照相机面板Render Globals一般渲染Batch Render批渲染Cancel Batch Render取消批渲染Show Batch Render显示批渲染Dynamics动力学系统Settings设置Initial State初始状态Set For Current当前设置Set For All Dynamic设置总体动力学特性Rigid Body Solver刚体解算器Dynamics Controller动力学控制器Particle Collision Events粒子爆炸Particle Caching粒子缓冲Run-up and Cache执行缓冲Cache Current Frame缓冲当前帧Set Selected Particles设置选定粒子Dynamics On动力学开Dynamics Off动力学关Set All Particles设置所有粒子Particles All On When Run执行时粒子系统开Auto Create Rigid Body自动创建刚体Particles粒子Particle Tool粒子工具Create Emitter创建发射器Add Emitter增加发射器Add Collisions增加碰撞Add Goal增加目标Fields场Create Air创建空气动力场Create Drag创建拖动场Create Gravity创建动力场Create Newton创建牛顿场Create Radial创建辐射动力场Create Turbulence创建震荡场Create Uniform创建统一场Create Vortex创建涡流场Add Air增加空气动力场Add Newton增加牛顿场Add Radial增加辐射场Add Turbulence增加震荡场Add Uniform增加统一场Add Vortex增加涡流场Connect连接Connect to Field场连接Connect to Emitter发射器连接Connect to Collision碰撞连接Bodies柔体和刚体Create Active Rigid Body创建正刚体Create Passive Rigid Body创建负刚体Create Constraint创建约束物体Create Soft Body创建柔体Create Springs创建弹簧Set Active Key设置正向正Set Passive Key设置负向正Help帮助Product Information产品信息Help帮助。
MAYA中英文对照表
Maya英文菜单翻译Create ModelingCreate and Edit Curves建立曲线的工具：Create > CV Curve Tool建立CV曲线工具Create > EP Curve Tool建立EP曲线工具Create > Pencil Curve Tool绘制自由曲线工具Create > Arc Tools建立弧形工具Create > Text建立曲线文字工具编辑曲线Edit Curves选单：Edit Curves > Duplicate Surface Curves 复制曲面上的曲线1.包括Make Live在曲面上绘制的曲线2.Edit NURBS > Project Curve on Surface投影的曲线在曲面上，然后经过修剪Edit NURBS > Trim Tool的边缘线复制。
Edit Curves > Attach Curves 两条曲线线段合并，或进入编辑元素设定要合并的各自曲线的点Edit Curves > Detach Curves 剪断一条曲线成2断，按右键先选择Edit point的x节点再执行此指令Edit Curves > Align Curves对齐曲线，2条曲线头尾对齐。
对齐最后选择的曲线，或进入编辑元素设定要对齐的各自曲线的点Edit Curves > Open/Close Curves 关闭或打开曲线Edit Curves > Move Seam 移动接缝的点Edit Curves > Cut Curve 剪下2条相交曲线，.最后选取的曲线被剪取(只要交叉处集会被剪断)使用Edit Curves > Intersect Curves 在两条或多条独立曲线接触或交叉处创建曲线点定位器。
Intersect Curves 命令常与剪切曲线、分离曲线、Snap to Point（吸附到点）一起使用不能直接交叉具有等位结构线或表面曲线的独立曲线。
Maya菜单中英文对照, Maya快捷键
Maya菜单中英文对照,Maya快捷键File文件New Scene建立新场景Open Scene打开场景Save Scene存盘场景Save Scene As改名存盘Import导入Export All导出所有Export Selection导出选定物体Create Reference引入场景文件Reference Editor引入场景编辑器Project项目New建立新项目Edit Current编辑当前项目Set指定当前项目Exit退出Maya 菜单中英文对照Edit编辑Undo取消上一次操作Redo恢复上一次操作Repeat重复最后一次操作Keys关键帧Cut Keys裁剪关键帧Copy Keys拷贝关键帧Paste Keys粘贴关键帧Delete Keys删除关键帧Scale Keys缩放关键帧Bake Simulation模拟复制Delete删除Delete by Type根据类型删除History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Rigid Bodies刚体Delete All by Type根据类型删除所有History构造历史Channels通道Static Channels静帧通道Motion Paths运动路径Expressions表达式Constraints约束Unused Transforms未用变形Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Lights灯光Cameras照相机Image Planes图像板Shading Groups and Materials阴影组和材质Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Select All选择所有Select All by Type根据类型选择所有Joints连接IK Handles逆向运动控制柄Lattices车削Clusters族Sculpt Objects雕刻物体Wires网格Transforms变形Geometry几何体NURBS Geometry NURBS几何体Polygon Geometry多边形几何体Lights灯光Cameras照相机Image Planes图像板Particles粒子Rigid Bodies刚体物体Rigid Constraints刚体约束Quick Select Set快速选择集Layers层New Layers建立新层Rename Layer更改层名称Remove Current Layer移去当前层Layer Editor层编辑器Transfer to Layer转化为层Select All on Layer选择层上所有物体Hide Layer隐藏层Hide All Layers隐藏所有层Show Layer显示层Show All Layers显示所有层Template Layer临时层Untemplate Layer解除临时层Hide Inactive Layers隐藏非活动层Template Inactive Layers临时非活动层Duplicate复制Group成组Ungroup解成组Create Empty Group建立空成组Parent建立父物体Unparent解除父物体Maya 菜单中英文对照Modify修改Transformation Tools变形工具Move Tool移动工具Rotate Tool旋转工具Scale Tool缩放工具Show Manipulator Tool显示手动工具Default Object Manipulator默认调节器Proportional Modi Tool比例修改工具Move Limit Tool移动限制工具Rotate Limit Tool旋转限制工具Scale Limit Tool缩放限制工具Reset Transformations重新设置变形控制Freeze Transformations冻结变形控制Enable Nodes授权动画节点All所有IK solvers逆向运动连接器Constraints约束Expressions表达式Particles粒子Rigid Bodies刚体Snapshots快照Disable Node废弃动画节点Make Live激活构造物Center Pivot置中枢轴点Prefix Hierarchy Names定义前缀Add Attribute增加属性Measure测量Distance Tool距离工具Parameter Tool参数工具Arc Length Tool弧度工具Animated Snapshot动画快照Animated Sweep由动画曲线创建几何体曲面Maya 菜单中英文对照Display显示Geometry几何体Backfaces背面Lattice Points车削点Lattice Shape车削形Local Rotation Axes局部旋转轴Rotate Pivots旋转枢轴点Scale Pivots缩放枢轴点Selection Handles选定句柄NURBS Components NURBS元素CVs CV曲线Edit Points编辑点Hulls可控点Custom定制NURBS Smoothness NURBS曲面光滑处理Hull物体外壳Rough边框质量Medium中等质量Fine精细质量Custom定制Polygon Components多边形元素Custom Polygon Display定制多边形显示Fast Interaction快速交错显示Camera/Light Manipulator照相机/灯光操作器Sound声音Joint Size关节尺寸IK Handle Size IK把手尺寸Maya 菜单中英文对照Window窗口General Editors通用编辑器Set Editor系统设置编辑器Attribute Spread Sheet属性编辑器Tool Settings工具设置Filter Action Editor滤镜动作编辑器Channel Control通道控制信息Connection Editor连接编辑器Performance Settings性能设置Script Editor Script编辑器Command Shell命令窗口Plug-in Manager滤镜管理器Rendering Editors渲染编辑器Rendering Flags渲染标记Hardware Render Buffer硬件渲染缓冲区Render View渲染视图Shading Groups Editor阴影组编辑器Texture View质地视图Shading Group Attributes阴影组属性Animation Editors动画编辑器Graph Editor图形编辑器Dope SheetBlend Shape融合形Device Editor设备编辑器Dynamic Relationships动态关系Attribute Editor属性编辑器Outliner框架Hypergraph超图形Multilister多功能渲染控制Expression Editor表达式编辑器Recent Commands当前命令Playblast播放预览View Arangement视图安排Four四分3 Top Split上三分3 Left Split左三分3 Right Split右三分3 Bottom Split底部三分2 Stacked二叠分2 Side By Side二平分Single单图Previous Arrangement前次安排Next Arrangement下次安排Saved Layouts保存布局Single Perspective View单透视图Four View四分图Persp/Graph/Hyper透视/图形/超图形Persp/Multi/Render透视/多功能/渲染Persp/Multi/Outliner透视/多功能/轮廓Persp/Multi透视/多功能Persp/Outliner透视/轮廓Persp/Graph透视/图形Persp/Set Editor透视/组编辑器Edit Layouts编辑布局Frame Selected in All Views所有视图选定帧Frame All in All Views所有视图的所有帧Minimize Application最小化应用Raise Application Windows移动窗口向前Options可选项General Preferences一般设置UI Preferences用户界面设置Customize UI定制用户界面Hotkeys快捷键Colors颜色Marking Menus标记菜单Shelves书架Panels面板Save Preferences保存设置Status Line状态栏Shelf书架Feedback Line反馈栏Channel Box通道面板Time Slider时间滑动棒Range Slider范围滑动棒Command Line命令行Maya 菜单中英文对照Help Line帮助行Show Only Viewing Panes仅显示视图面板Show All Panes显示所有面板Modeling建模系统Primitives基本物体Create NURBS创建NURBS物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Circle圆Create Polygons创建多边形物体Sphere球体Cube立方体Cylinder圆柱体Cone圆台（锥）体Plane平面物体Torus面包圈Create Text创建文本Create Locator创建指示器Construction Plane构造平面Create Camera创建照相机Curves创建曲线CV Curve Tool CV曲线工具EP Curve Tool EP曲线工具Pencil Curve Tool笔曲线工具Add Points Tool加点工具Curve Editing Tool曲线编辑工具Offset Curve曲线移动Offset Curve On Surface曲线在表面移动Project Tangent曲线切线调整Fillet Curve带状曲线Rebuild Curve重建曲线Extend Curve扩展曲线Insert Knot插入节点Attach Curves连接曲线Detach Curves断开曲线Align Curves对齐曲线Open/Close Curves打开/关闭曲线Reserse Curves反转曲线Duplicate Curves复制曲线CV Hardness硬化曲线Fit B-spline适配贝塔曲线Maya 菜单中英文对照Surfaces曲面Bevel斜角Extrude凸出Loft放样Planar曲面Revolve旋转Boundary边界Birail 1 Tool二对一工具Birail 2 Tool二对二工具Birail 3+ Tool二对三工具Circular Fillet圆边斜角Freeform Fillet***形斜角Fillet Blend Tool斜角融合工具Edit Surfaces编辑曲面Intersect Surfaces曲面交叉Project Curve投影曲线Trim Tool修整曲线工具Untrim Surfaces撤消修整Rebuild Surfaces重建曲面Prepare For Stitch准备缝合Stitch Surface Points点缝合曲面Stitch Tool缝合工具NURBS to Polygons NURBS转化为多边形Insert Isoparms添加元素Attach Surfaces曲面结合Detach Surfaces曲面分离Align Surfaces曲面对齐Open/Close Surfaces打开/关闭曲面Reverse Surfaces反转曲面Polygones多边形Create Polygon Tool创建多边形工具Append to Polygon Tool追加多边形Split Polygon Tool分离多边形工具Move Component移动元素Subdivide多边形细化Collapse面转点Edges边界Soften/Harden柔化/硬化Close Border关闭边界Merge Tool合并工具Bevel斜角Delete and Clean删除和清除Facets面Keep Facets Together保留边线Extrude凸出Extract破碎Duplicate复制Triangulate三角分裂Quadrangulate四边形合并Trim Facet Tool面修整工具Normals法向Reverse倒转法向Propagate传播法向Conform统一法向Texture质地Assign Shader to Each Projection指定投影Planar Mapping平面贴图Cylindrical Mapping圆柱体贴图Spherical Mapping球体贴图Delete Mapping删除贴图Cut Texture裁剪纹理Sew Texture斜拉纹理Unite联合Separate分离Smooth光滑Selection Constraints选定限定工具Smart Command Settings改变显示属性Convert Selection转化选定Uninstall Current Settins解除当前设定Maya 菜单中英文对照Animation动画模块Keys关键帧Settings设置关键帧Auto Key自动设置关键帧Spline样条曲线式Linear直线式Clamped夹具式Stepped台阶式Flat平坦式Other其他形式Set Driven Key设置驱动关键帧Set设置Go To Previous前移Go To Next后退Set Key设置帧Hold Current Keys保留当前帧Paths路径Set Path Key设置路径关键帧Attach to Path指定路径Flow Path Object物体跟随路径Skeletons骨骼Joint Tool关节工具IK Handle Tool反向动力学句柄工具IK Spline Handle Tool反向动力学样条曲线句柄工具Insert Joint Tool添加关节工具Reroot Skeleton重新设置根关节Remove Joint去除关节Disconnect Joint解除连接关节Connect Joint连接关节Mirror Joint镜向关节Set Preferred Angle设置参考角Assume Preferred AngleEnable IK Solvers反向动力学解算器有效EIk Handle Snap反向动力学句柄捕捉有效ESelected IK Handles反向动力学句柄有效DSelected IK Handles反向动力学句柄无效Deformations变形Edit Menbership Tool编辑成员工具Prune Membership变形成员Cluster簇变形Lattice旋转变形Sculpt造型变形Wire网格化变形Lattice旋转Sculpt造型Cluster簇Point On Curve线点造型Blend Shape混合变形Blend Shape Edit混合变形编辑Add增加Remove删除Swap交换Wire Tool网格化工具Wire Edit网格编辑Add增加Remove删除Add Holder增加定位曲线Reset重置Wire Dropoff Locator网线定位器Wrinkle Tool褶绉变形工具Edit Lattice编辑旋转Reset Lattice重置旋转Remove Lattice Tweeks恢复旋转Display I-mediate Objects显示中间物体Hide Intermediate Objects隐藏中间物体Skinning皮肤Bind Skin绑定蒙皮Detach Skin断开蒙皮Preserve Skin Groups保持皮肤组Detach Skeleton分离骨骼Detach Selected Joints分离选定关节Reattach Skeleton重新连接骨骼Reattach Selected Joints重新连接关节Create Flexor创建屈肌Reassign Bone Lattice Joint再指定骨头关节Go to Bind Pose恢复骨头绑定Point关节Aim目标Orient方向Scale缩放Geometry几何体Normal法向Maya 菜单中英文对照RenderingLighting灯光Create Ambient Light创建环境光Create Directional Light创建方向灯Create Point Light创建点光源Create Spot Light创建聚光灯Relationship Panel关系面板Light Linking Tool灯光链接工具Shading 阴影Shading Group Attributes阴影组属性Create Shading Group创建阴影组Lambert朗伯材质Phong Phong材质Blinn布林材质Other其他材质Assign Shading Group指定阴影组InitialParticleSE初始粒子系统InitialShadingGroup初始阴影组Shading Group Tool阴影组工具Texture Placement Tool纹理位移工具Render渲染Render into New Window渲染至新窗口Redo Previous Render重复上次渲染Test Resolution测试分辨率Camera Panel照相机面板Render Globals一般渲染Batch Render批渲染Cancel Batch Render取消批渲染Show Batch Render显示批渲染Dynamics动力学系统Settings设置Initial State初始状态Set For Current当前设置Set For All Dynamic设置总体动力学特性Rigid Body Solver刚体解算器Dynamics Controller动力学控制器Particle Collision Events粒子爆炸Particle Caching粒子缓冲Run-up and Cache执行缓冲Cache Current Frame缓冲当前帧Set Selected Particles设置选定粒子Dynamics On动力学开Dynamics Off动力学关Set All Particles设置所有粒子Particles All On When Run执行时粒子系统开Auto Create Rigid Body自动创建刚体Particles粒子Particle Tool粒子工具Create Emitter创建发射器Add Emitter增加发射器Add Collisions增加碰撞Add Goal增加目标Fields场Create Air创建空气动力场Create Drag创建拖动场Create Gravity创建动力场Create Newton创建牛顿场Create Radial创建辐射动力场Create Turbulence创建震荡场Create Uniform创建统一场Create Vortex创建涡流场Add Air增加空气动力场Add Newton增加牛顿场Add Radial增加辐射场Add Turbulence增加震荡场Add Uniform增加统一场Add Vortex增加涡流场Connect连接Connect to Field场连接Connect to Emitter发射器连接Connect to Collision碰撞连接Bodies柔体和刚体Create Active Rigid Body创建正刚体Create Passive Rigid Body创建负刚体Create Constraint创建约束物体Create Soft Body创建柔体Create Springs创建弹簧Set Active Key设置正向正Set Passive Key设置负向正Help帮助Product Information产品信息Help帮助Maya快捷键速记表,Maya快捷键Maya快捷键速记表以下列出的是Maya 2.0/2.5版本中所有系统默认的快捷键及它们的使用方法和功能。
maya中英对照表
Maya菜单中英文对照表File文件New Scene 建立新场景Open Scene 打开场景Save Scene 保存场景Save Scene As 另存场景为Save Preferences 保存参数Optimize Scene Size 优化场景尺寸Import 导入Export All 全部导出Export Selection 导出选定项目View Image 查看图像View Sequence 查看序列帧Create Reference 创建参照Reference Editor 参照编辑器Project 方案New 新建Edit Current 编辑当前Set 设置Recent Files最近使用文件Recent Increments最近增加Recent Projects最近使用方案Exit退出Edit编辑Undo 取消上一次操作Redo 恢复上一次操作Repeat 重复最后一次操作Recent Commands List 最近使用命令列表Cut 剪切Copy 复制Paste 粘贴Keys 关键帧Cut Keys 剪切关键帧Copy Keys 复制关键帧Paste Keys 粘贴关键帧Delete Keys 删除关键帧Delete FBIK Keys 删除完整躯体IK关键帧Delete All FBIK Keys 删除全部完整躯体关键帧Delete Body Part Keys 删除躯体部分关键帧Delete Selected FBIK Keys 删除选定完整躯体IK关键帧Scale Keys 缩放关键帧Snap Keys 捕捉关键帧Bake Simulation 模拟烘焙Delete 删除Delete by Type 根据类型删除History 历史记录Non-Deformer History 没有变形的历史记录 Channels 通道Static Channels 静态通道Motion Paths 运动路径Non-particle Expressions 非粒子表达式Constraints 约束Sounds 声音Assets资源Rigid Bodies 刚体Delete All by Type 根据类型删除所有History 历史记录Non-Deformer History 没有变形的历史记录 Channels 通道Static Channels 静态通道Clips 剪辑Motion Paths 运动路径Non-particle Expressions 非粒子表达式Constraints 约束Sounds 声音Joints 连接，关节IK Handles 逆向运动控制柄Lattices 车削，晶格Clusters 族Sculpt Objects 雕刻物体Nonlinears 非线性Wires 网格Lights 灯光Cameras 摄影机Image Planes 图板，图像平面Shading Groups and Materials 阴影组和材质，着色组合材质Asstes资源Particles 粒子Rigid Bodies 刚体Rigid Constraints 刚体约束Fluids 流体Fur毛皮Strokes笔划nCloths 布料nParticles粒子nRigids 刚体Dynamic Constraints 动力学约束Select Tool 选择工具Lasso Selection 套索选择工具Paint Selection Tool 绘图选择工具Select All 选择所有Deselect 取消选择Select Hierarchy 选择层级Invert Selection 反选Select All by Type 根据类型选择所有 Joints 关节IK Handles 逆向运动控制柄Lattices 晶格Clusters 族Sculpt Objects 雕刻对象Wires 网格，线Transforms 变形Geometry 几何体NURBS Geometry NURBS 曲线NURBS Surfaces NURBS 曲面Polygon Geometry 多边形几何体Subdiv Geometry 细分几何体Lights 灯光Cameras 摄影机Image Planes 图板，图像平面Assets资源Particles 粒子Rigid Bodies 刚体Rigid Constraints 刚体约束Fluids 流体Fur 毛皮Strokes 笔划Brushes 笔刷nCloths 布料nParticlesnRigids 刚体Dynamic Constraints 动力学约束Quick Select Set快速选择组Duplicate 复制Duplicate Special 特殊复制Duplicate with Transform 变换并复制Transfer Attribute Values传递属性值Group 成组Ungroup 解组Lever of Detail 细节级别Group 创建细节级别，分组Ungroup 取消细节级别，解组Parent 父子关系Unparent 取消父子关系Modify修改Transformation Tools 变换工具Move Tool 移动工具Rotate Tool 旋转工具Scale Tool 缩放工具Universal Manipulator 通用操纵器Move Normal Tool 移动法线工具Move/Rotate/Scale Tool 移动/旋转/缩放工具Show Manipulator Tool 显示操纵器工具DefaultObject Manipulator 默认物体操纵器None无Move移动Rotate旋转Scale缩放Transform变换Proportional Modification Tool 比例修改工具 Soft Modification Tool 柔性修改工具Reset Transformations 重设变换Freeze Transformations 冻结变换Snap Align Objects 捕捉对齐物体Point to Point 点对点捕捉对齐物体2 Points to 2 Points 两点对两点3 Points to 3 Points 三点对三点Align Objects 对齐物体Position Along Curve沿曲线放置Align Tool 对齐工具Snap Togather Tool 捕捉聚集工具Evaluate Nodes 节点求值Evaluate All 全部解算Ignore All 全部忽略IK Solvers IK解算器Constraints 约束Expressions 表达式Fluids 流体Global Stitch 全局缝合nCloths 新世代布料nParticlesnRigids 新世代刚体Dynamic Constraints 动态约束Nucleuses 核子Particles 粒子Rigid bodies 刚体Snapshots 快照Make Live 物体表面捕捉，激活Center Pivot 中心枢轴Prefix Hierarchy Names 添加层次名称前缀Search and Replace Names 搜索并替换名称Add Attribute 添加属性Edit Attribute 编辑属性Delete Affribute 删除属性Convert 转换NURBS to Polygons 转换NURBS为多边形NURBS to Subdiv 转换NURBS为细分曲面Polygons to Subdiv 转换多边形为细分曲面Smooth Mesh Preview to Polygons平滑网格浏览到多边形Polygon Edges to Curve多边形到曲线Subdiv to Polygons 转换细分曲面为多边形Subdiv to NURBS 转换细分曲面为NURBSNurbs curve to bezier Nurbs曲线到bezierBezier curve to nurbs bezier曲线到nurbsPaint Effects to Polygons 转换画笔特效为多边形Paint Effects to NURBS 转换画笔为NURBSPaint Effects to Curves 转换画笔特效为曲线Texture to Geometry 转换纹理为几何体Displacement to Polygons 置换转换为多边形（带历史）Displacement to Polygons withhistory置换转换为多边形（带历史）Fluid to Polygons 转换流体为多边形nParticle to Polygons到多边形Instance to object实例对象Replace Objects 替换对象Paint Scripts Tool 脚本绘图工具Paint Attributes Tool 属性绘图工具Create创建NURBS Primitives 基本NURBSSphere 球体Cube 立方体Cylinder 圆柱体Cone 圆锥体Plane 平面Torus 圆环Circle 圆形Square 正方形Interactive Creation 交互创建Exit on Completion 完成后退出Polygon Primitives 多边形基本体Cube 立方体Cylinder 圆柱体Cone 圆锥体Plane 平面Torus 圆环Prism 棱柱体Pyramid 棱锥体Pipe 管状体Helix 螺旋体Soccer Ball 足球Platonic Solids 多面实体，柏拉图多面体Interactive Creation 交互创建Exit on Completion 完成后退出Subdiv Primitives 细分曲面基本体Sphere 球体Cube 立方体Cylinder 圆柱体Cone 圆锥体Plane 平面Torus 圆环Volume Primitives 体积基本体Cube 立方体Cone 圆锥体Lights 灯光Ambient Light 环境光Directional Light 平行光Point Light 点光源Spot Light 聚光灯Area Light 区域光Volume Light 体积光Cameras 摄影机Camera 摄影机Camera and Aim 带目标点的摄影机Camera,Aim,and Up 带目标点和旋转轴的摄影机Stereo Camera 立体摄影机Multi stereo rig多立体声钻机CV Curve Tool CV曲线工具EP Curve Tool EP曲线工具Pencil Curve Tool 铅笔曲线工具Arc Tools 弧工具Three Point Circular Arc 三点圆弧Two Point Circular Arc 两点圆弧Measure Tools 测量工具Distance Tool 距离工具Parameter Tool 参数工具Arc Length Tool 弧线长度工具Text 文本Adobe® Illustrator® Object Illustrator物体Construction Plane 构造平面Locator 定位器Annotation 注释Empty Group 空组Sets 集Set 集Partition 分区Quick Select Set 快速选择集Display显示Grid 栅格Heads Up Display 平视显示仪Select Details选择详细信息Object Details 对象详细信息Poly Count 多边形计数Subdiv Details 细分曲面详细信息Animation Details 动画详细信息fIK details hik细节Frame Rate 帧速率Current Frame当前帧Secenetimecode场景时间码Current assets当前资源Camera Names 摄影机名称Focal Length 焦距View Axis 视图轴Origin Axis 原点轴View Cube查看立方体Tool Message 工具提示UI Elements 用户界面元素Status Line 状态栏Shelf 工具架Time Slider 时间滑块Range Slider 范围滑块Command Line 命令栏Help Line 帮助栏Tool Box 工具箱Attribute Editor 属性编辑器Tool Settings 工具设置Channel Box通道栏Layer Editor图层编辑器Channel Box/Layer Editor 通道栏/图层编辑器Hide All UI Elements 隐藏全部用户界面元素Show All UI Elements 显示全部用户界面元素Restore UI Elements 恢复用户界面Hide 隐藏Hide Selection 隐藏选定对象Hide Unselected Objects 隐藏未选定对象Hide Unselected CVs 隐藏未选择的CV Hide Geometry 隐藏几何体Nurbs surfaces nurbs曲面Nurbs curves nurbs曲线Polygon surfaces多边形几何体Deforming geometry变形几何体Subdiv surfaces细分曲面Strokes笔划Strokespath curves笔划路径曲线Stroke control curves笔划控制曲线Hide Kinematics 隐藏运动学对象Joints关节Ik handles ik控制器Hide Deformers 隐藏变形器Lattices晶格Sculpt objects雕刻对象Clusters簇Nonlinears非线性Wrap influences包裹影响Smooth skin influences平滑蒙皮影响Lights 灯光Cameras 摄影机Texture Placements 纹理布置Construction Planes 构造平面Fluids 流体Hair Systems 头发系统Follicles 毛囊Fur 毛皮nCloths 布料nParticlesnRigids 刚体Dynamic Constraints 动力学约束Animation Markers 动画标记Light Manipulators 灯光操纵器Camera Manipulators 摄影机操纵器Show 显示Show Selection 显示选定对象Show Last Hidden 显示上次隐藏的对象All Surface CVs 全部曲面CVShow Geometry 显示几何体Nurbs surfaces nurbs曲面Nurbs curves nurbs曲线Polygon surfaces多边形几何体Deforming geometry变形几何体Subdiv surfaces细分曲面Strokes笔划Strokespath curves笔划路径曲线Stroke control curves笔划控制曲线Show Kinematics 显示运动学对象Joints关节Ik handles ik控制器Show Deformers 显示变形器All全部Lattices晶格Sculpt objects雕刻对象Clusters簇Nonlinears非线性Wrap influences包裹影响Smooth skin influences平滑蒙皮影响Lights 灯光Cameras 摄影机Texture Placements 纹理布置Construction Planes 构造平面Fluids 流体Hair Systems 头发系统Follicles 毛囊Fur 毛皮nCloths 布料nParticlesnRigids 刚体Dynamic Constraints 动力学约束Animation Markers 动画标记Light Manipulators 灯光操纵器Camera Manipulators 摄影机操纵器Wireframe Color 线框颜色Object Display 对象显示Template 模版Untemplate 取消模版Bounding Box 边框No Bounding Box 无边框Geometry 几何体No Geometry 无几何体Ignore Hardware Shader 忽略硬件着色器Use Hardware Shader 使用硬件着色器Fast Interaction 快速交互Transform Display 变换属性显示Local Rotation Axes 局部旋转坐标Rotate Pivots 旋转中心点Scale Pivots 缩放中心点Selection Handles 选定项目手柄Polygons 多边形Backface Culling 消隐背面Culling Options 消隐选项Keep Wire 保留线框Keep Hard Edges 保留硬边线Keep Vertices 保留顶点Vertices 顶点Vertex Size 顶点尺寸Crease Vertices折痕的顶点UVs UV点Unshared UVs 不共享的UV点UV Size UV尺寸Component IDs 组件idVertices 顶点Edges 边Faces 面Face Normals 表面法线Vertex Normals 顶点法线Tangents 切线Normals Size 法线大小Standard Edges 标准边Soft/Hard Edges 软/硬边Hard Edges 硬边Border Edges 边界边Crease Edges 皱褶边Texture Border 纹理边界边Edge Width 边线宽度Face Centers 面中心Face Triangles 面三角形Non-planar Faces 非平面的面Reset Display 重设显示Limit to Selected 限制到选定项目Custom Polygon Display 自定义多边形显示NURBS NURBS显示Hulls 外壳Normals (Shaded Mode) 法线（着色模式）Patch Centers 片面中心线Surface Origins 曲面原点Custom自定义Hull 外壳，壳线Rough 粗略Medium 中等Fine 精细Custom Smoothness 自定义平滑度Subdiv Surfaces 细分曲面Vertices 顶点Edges 边线Faces 面Normals (Shaded Mode) 法线（着色模式）UV Borders (Texture Editor) UV边界（纹理编辑器）Hull 外壳Rough 粗糙Medium 中等Fine 精细Animation 动画Lattice Shape 晶格的网格Joint Size 关节大小IK/FK Joint Size IK/FK关节大小IK Handle Size IK手柄大小Joint Labels 关节标签Rendering 渲染Camera/Light Manipulator 摄影机/灯光操纵器Paint Effects Mesh Display 显示画笔特效网格Stroke Display Quality 笔划显示质量Subdivisionscaps地面细分数项目窗口Scenes 场景Assets 模板Images 图像Sourceimages 源图像Renderdata 渲染数据Clips 片段Sound 声音Scripts 脚本Data 磁盘缓存Movies 影片Data 转换器数据Time editor 时间编辑器Autosave 自动保存Seneca Assembly 场景集合。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
公共菜单：Edit编辑
公共菜单：Edit编辑
公共菜单：Modify修改
公共菜单：Create创建
公共菜单：Display显示
公共菜单：Windows窗口
动画模块：Animate动画
动画模块：Deform变形
动画模块：Skeletion骨骼
动画模块：Skin蒙皮
动画模块：Constrain约束
动力学模块：Particles粒子Fluid EFFects流体特效
动力学模块：Fields动力场、Soft/Rigid Bodies柔体与刚体、EFFects特效
Solvers解算
动力学模块：Hair毛发
渲染模块：Lighting/Shading灯光与阴影
Texturing纹理Render渲染
Toon卡通材质
动画模块：Character特性
建模模块：Edit Curves编辑曲线
建模模块：urfaces表面
建模模块：Edit NURBS编辑NURBS
建模模块：Polygons编辑曲线
建模模块：EditPolygons编辑Polygons
建模模块：Polygons UVSubdiv surfaces细分曲面
渲染模块：Paint EFFects画笔特效、Fur皮毛