ELT-316SURWA,S530-A3, 规格书,Datasheet 资料
诺瓦科技全彩LED接收卡MRV316产品使用说明书
MRV316接收卡版本 编号： V1.0.0 文档编号 ：NS 110000374产品说明书版权所有©2017西安诺瓦电子科技有限公司。
保留一切权利。
非经本公司书面许可，任何单位和个人不得擅自摘抄、复制本文档内容的部分或全部，并不得以任何形式传播。
商标声明是诺瓦科技的注册商标。
声明欢迎您选用西安诺瓦电子科技有限公司（以下简称诺瓦科技）的产品，如果本文档为您了解和使用产品带来帮助和便利，我们深感欣慰。
我们在编写文档时力求精确可靠，随时可能对内容进行修改或变更，恕不另行通知。
如果您在使用中遇到任何问题，或者有好的建议，请按照文档提供的联系方式联系我们。
对您在使用中遇到的问题，我们会尽力给予支持，对您提出的建议，我们衷心感谢并会尽快评估采纳。
产品说明书更新记录更新记录产品说明书目录目录更新记录 (ii)1安全说明 (1)2概述 (2)3产品特性 (3)4硬件结构 (4)4.1外观 (4)4.2尺寸图 (5)4.3指示灯说明 (5)4.4数据接口定义 (6)5软件结构 (7)6典型组网 (8)7产品规格 (10)产品说明书1安全说明1安全说明本章介绍接收卡MRV316的安全说明，目的是保证产品的存储、运输、安装和使用安全。
安全说明适用于所有接触和使用产品的人员。
首先请注意以下几点：●请阅读所有说明。
●请保留所有说明。
●请遵循所有说明。
存储和运输安全●请注意防尘防水。
●请避免阳光长时间直射。
●请勿靠近热源和火源。
●请勿放置在易爆气体环境中。
●请勿放置在强电磁环境中。
●请将产品放在稳固的位置，以防坠落造成产品损坏或人身伤害。
●请保存包装箱和包装材料。
存储和运输产品时可以使用。
为了最大程度地保护设备，请将产品按照出厂时的原始包装重新包好。
安装和使用安全●只有通过培训的专业人员才可以安装产品。
●禁止带电插拔。
●请确保箱体安全接地。
●请佩戴防静电护腕，穿戴绝缘手套。
●请勿将产品安装在震动多或强的环境中。
ELT-315SURWA中文资料(everlight)中文数据手册「EasyDatasheet - 矽搜」
260 ± 5
℃
ESD
2000
V
Pd
60
mW
IF（峰）
160
mA
符号
Min.
----
5.6 Iv
----
--
△λ
----
VF
----
IR
----
Typ.
Max.
Unit
条件
2.5
----
mcd
IF=2mA
11.0
----
mcd
IF=10mA
0.8
----
mcd
IF=2mA
3.5
●这些设备都是用白色 段和灰色面.
█应用： ●音频设备 ●仪表板 ●数字读出显示器
PART NO.
ELT-315SURWA/S530-A3
ELT-315SURWA/S530-A3
材料 AlGaInP
Chip 发光颜色 超红
芯片中文手册,看全文,戳
技术参数表 0.36"三位数显示
包装尺寸
峰值正向电流（责任1/10 @ 1KH Z)
注：*焊接时间≦5秒. █电子光学特性：
参数
发光 烈度
每段 每小数点
峰值波长
主波长 光谱辐射 频带 正向电压
反向电流
ELT-315SURWA/S530-A3
符号
额定值
Unit
VR
5
V
IF
25
mA
Topr -40至+85
℃
Tstg -40至+100
℃
Tsol
芯片中文手册,看全文,戳
技术参数表 0.36"三位数显示
█特点： ●工业标准尺寸. ●低功耗. ●分类发光强度. ●无铅 ●产品本身将防护持在RoHS 标准版
333-2SDRTS530-A3;中文规格书,Datasheet资料
Technical Data Sheet5.0mm Round Type LED Lamps█ Features :●Choice of various viewing angles ●Available on tape and reel.●Reliable and robust●Pb free●The product itself will remain within RoHS compliant version.█ Descriptions :●The series is specially designed forapplications requiring higher brightness●The led lamps are available with different colors, intensities.█ Applications :●TV set ●Monitor ●Telephone ●Computer333-2SDRT/S530-A3AlGaInPHyper RedRed TransEVERLIGHT ELECTRONICS CO.,LTD.http : // Rev.:3Page: 1 of 6Device Number :CDLE-033-920Prepared date:2006/2/17Prepared by:Xiuzen FengCG0602036333-2SDRT/S530-A3Lens ColorPART NO.MaterialEmitted ColorEVERLIGHT ELECTRONICS CO.,LTD.http : // Rev.:3Page: 2 of 6Device Number :CDLE-033-920Prepared date:Prepared by:Xiuzen Feng2006/2/17Technical Data Sheet5.0mm Round Type LED LampsElectro-Optical Characteristics (Ta=25℃)SymbolMin.Typ.Max.UnitVF I F =20mA ／ 2.0 2.4VIR V R =5V ／／10μAIv I F =20mA 5001250／mcd2θ1/2I F =20mA ／10／degλp I F =20mA ／632／nmλd I F =20mA ／624／nm△λI F =20mA ／20／nmEVERLIGHT ELECTRONICS CO.,LTD.http : // Rev.:3Page: 3 of 6Device Number :CDLE-033-920Prepared date:Prepared by:Xiuzen FengPeak Wavelength Dominant Wavelength Spectrum RadiationBandwidthForward Voltage Reverse Current Luminous Intensity Viewing Angle 333-2SDRT/S530-A3ConditionParameter2006/2/17Technical Data Sheet5.0mm Round Type LED Lamps█Reliability test items and conditions:The reliability of products shall be satisfied with items listed below. Confidence level：97% LTPD：3%NO Item Test ConditionsSample SizeFailure Judgment Criteria1Solder Heat TEMP : 260℃ ± 5 ℃76 PCS H : +100℃ 15min2Temperature Cycle∫ 5 min 76 PCSL : -40℃ 15min H : +100℃ 5min3Thermal Shock ∫ 10 sec 76 PCSL : -10℃ 5min 4High TemperatureStorage TEMP : 100℃76 PCS 5Low TemperatureStorage TEMP : -40℃76 PCS TEMP : 25℃I F = 20mA 7High Temperature /High Humidity85℃ / 85% RH76 PCSNote：Ivt：To test Iv value of the chip before the reliablility testIv：The test value of the chip that has completed the reliablility test U：Upper Specification Limit L： Lower Specification LimitEVERLIGHT ELECTRONICS CO., http : // Rev.:3 Page: 5 of 6Device Number :CDLE-033-920Prepared by:1000 HRS 1000 HRS 1000 HRS333-2SDRT/S530-A36DC Operating Life Ac/Re0/10/10/10/10/10/1Iv≦Ivt*0.5 or Vf≧U orVf≦LXiuzen FengPrepared date:2006/2/17Test Hours/Cycle 10 SEC0/176 PCS 300 CYCLES 300 CYCLES1000 HRSTechnical Data Sheet5.0mm Round Type LED LampsEVERLIGHT ELECTRONICS CO.,LTD. http : // Rev.:3 Device Number :CDLE-033-920Prepared date:2006/2/17 Prepared by:Page: 6 of 6 Xiuzen Feng分销商库存信息: EVERLIGHT333-2SDRT/S530-A3。
伊万视波 ET310A 数字存储万用示波表 说明书
1序言尊敬的用户；感谢您选择ET310A 数字存储万用示波表，相信该产品创新的功能组合、人性化的设计会给您现场检测带来极大的方便。
使用前，请仔细阅读本手册内容，尤其“安全须知”部分。
阅读后请将此手册妥善保管，以备需要时随时查阅。
如果本手册不慎遗失，请登录 网站论坛下载。
ET521论坛是专业维修论坛，可以免费下载各种维修资料或提供技术支持；也是业内人士交流经验的平台。
参与论坛活动，将所获积分直接转换为电子货币，持币享有购买产品特殊优惠，还可以有偿转让。
知识产权本产品采用多项专有技术，购买或使用本机不代表所有者针对这些知识产权的任何权利转让。
未经本公司同意而仿制、应用全部或部分技术有可能触犯这些知识产权，属侵权行为。
知识产权包括但不限于专利权、商标权、出版物、网站内容等等。
•本手册版权归珠海伊万电子科技有限公司所有。
•本手册提供的信息取代以往出版的所有资料，如有变动只在本公司官方网站公告。
•本公司的产品已获准及尚在审批的专利，受中华人民共和国专利法的保护。
•本公司保留改变产品规格、价格及软件升级的权利。
•本公司对产品手册及市场营销活动有最终解释权伊万科技注册的商标。
中国专利号：200720054112.0目录安全须知 (5)仪表简介 (7)主要特点 (7)按键功能 (8)基本操作 (9)开机与关机 (9)自动关机 (9)背光的使用 (9)电池充电 (10)使用AC适配器供电 (10)仪表的复位 (11)示波表操作 (12)进入示波表模式 (12)示波表模式下的基本显示内容 (12)功能键与主选单 (13)输入信号耦合方式的选择 (13)时基控制 (14)水平位置调节 (14)垂直幅度控制 (15)2垂直位置调节 (15)触发控制 (16)触发电平调节 (16)关于触发模式 (17)扫描状态的提示信息 (17)单次扫描的触发操作 (18)游标测量读出功能 (19)波形的自动测量 (21)扫描参数的自动设置 (21)信号波形的保持 (22)上位机通讯软件（选件） (23)DSO模式下测量时与PC通信 (24)信号波形的存储与读出 (25)DSO数据库操作时与PC通信 (27)万用表操作 (28)进入万用表模式 (28)万用表模式下的基本显示内容 (28)测量功能切换 (29)手动/自动量程选择 (29)相对值测量模式 (30)3测量数据保持 (31)峰值保持（P-H）模式 (32)AC与DC电压测量 (33)分贝（dB）测量 (34)AC和DC电流（400mA，20A）测量 (35)频率计数与占空比测量 (36)电阻与电导测量 (37)二极管/通断测试 (39)电容测量 (39)温度/h FE/外接钳头/晶振测量（选件，下同） (40)DMM模式下测量时与PC通信 (44)测量数据的存储与读出 (44)DMM数据库操作时与PC通信 (46)系统设置及零点校正 (47)技术参数与仪表成套 (50)仪表特性与技术参数 (50)显示符号及图标 (53)仪表成套与选件 (55)日常维护与故障排除 (58)售后服务 (60)45安全须知ET310A 数字存储万用示波表的设计符合IEC1010-1安全规范，过压电测量第二类CAT III -1000V ，污染保护等级：1级。
帕顿530以太网防雷器说明书.pdf
3
Using a hybrid circuit that incorporates Silicon Avalanche Diodes, the Model 530 can take repeated "hits" up to its rated capacity without degrading in performance. If the Model 530 should encounter a severe transient above its voltage rating, it will fail "open" to protect the connected hardware from damage. In this case, all signals (including data) are sent directly to ground, indicating to you that the Model 530 has "sacrificed itself" for your system and needs to be replaced.
• Operates at data rates to 10 Mbps
• Provides separate connection to chassis ground for surge handling
• Easy to install
DESCRIPTION
The Patton Model 530 thick Ethernet surge protector guards N-type Ethernet ports and connected equipment against data loss and hardware damage due to transient surges. Providing 1.8 Kilowatts of clamping transient protection, the Model 530 is easy to install and won't slow network performance.
DHT-S316 家庭影音系统使用指南说明书
DHT-S316HOME THEATER SYSTEM Owner’s ManualAccessories4 Inserting the batteries5 Operating range of the remote control unit5 Features6 Part names and functions7 Sound bar7 Subwoofer10 Remote control unit11 ConnectionsPositioning12 Positioning the sound bar12 Positioning the subwoofer14 Connecting a TV15 Connection 1: TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel)16 Connection 2: TV equipped with an HDMI connector and incompatible with the ARC / TV equipped with an optical digital connector17 Connection 3: TV equipped with an HDMI connector and incompatible with the ARC / TV equipped with an analog connector18 Connecting the power cords19PlaybackEnjoying television, movies and music20 Status LED table21 Listening to music on a Bluetooth device22 Pairing a Bluetooth device for the first time22 Pairing with other Bluetooth devices23 Listening to music with a paired Bluetooth device23 SettingsSettings24 Adjusting the volume24 Adjusting the subwoofer volume24 Selecting a listening mode25 Turning off the sound temporarily25 Setting the Bluetooth standby function25 Auto standby function26 Volume limiter function26TipsTroubleshooting27 Power does not turn on / Power is turned off28 Operations cannot be performed through the remote control unit28 No sound comes out29 Bluetooth playback does not work30 The HDMI Control function does not work30 Resetting factory settings31 AppendixAbout HDMI32 Trademark information33 Specifications34 Sound bar34 Subwoofer37Thank you for purchasing this Denon product.To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. AccessoriesCheck that the following parts are supplied with the product.Inserting the batteries1Slide the rear cover off the remote control unit in the2Insert 1 battery into the battery compartment as indicated.3Put the rear cover back on.NOTE0Remove the batteries from the remote control unit if it will not be in use for long periods.0If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.Operating range of the remote control unitPoint the remote control unit at the remote sensor when operating it.0Two-way sound bar with wireless subwoofer: Powerful, dynamic Denon home theater soundEasy Setup: Quickly connect to your TV with the supplied HDMI or Optical cables.Wireless Subwoofer: Powerful bass without the cables. Place the subwoofer within 30 ft of the sound bar for optimal enjoyment.2" Low-profile Design: At 2" tall, the Denon DHT-S316 fits most spaces and can be placed in front of your TV without blocking your TV's bottom edge or IR remote sensor.0Exceptional sound clarity for your TV, Blu-ray, gaming system and favorite music sourcesHDMI with Audio Return Channel: Send audio from your TV’s built-in apps, on-board tuner or HDMI connections over a single cable when you connect your TV’s HDMI ARC output to the sound bar using the included HDMI cable.Digital Audio Optical Input: Effortlessly connect your Blu-ray, gaming or other device with the included Optical cable.Analog Auxiliary Input: Connect any source compatible with a 3.5 mm input and listen through the DHT-S316.Bluetooth: Connect your smartphone or tablet to the DHT-S316 to wirelessly stream music and other audio.0Immerse yourself in a realistic home theater experienceDolby Digital and DTS Decoding: Virtual surround technology creates a powerful, realistic multi-channel home theater experience.Denon Dialogue Enhancer: Never miss a word of your favorite TV show or movie, Denon Dialogue Enhancer improves dialogue intelligibility - ideal for movies and TV shows. Turn up the dialogue without having to adjust overall volume.Sound baro Top panelA Power operation button (c )Turns the sound bar power on/off (standby). (v p. 20)Links to sound bar power and turns the subwoofer power on/off (standby).B Input source button (d )This selects the input source. (v p. 20)Switches the input source each time the button is pressed.C Bluetooth button (g )0Switches the input source to “Bluetooth”. (v p. 22)0Used to pair with Bluetooth devices. (v p. 22)D Volume buttons (+, –)These adjusts the volume level. (v p. 24)o Front panelA Status LEDDisplays the status of input source / input signal / listening mode, etc. (v p. 21)B Remote control sensorThis receives signals from the remote control unit. (v p. 5)o Bottom panelqA USB portService terminal. Not used in normal operation.o Rear panelA Wall hook holeUsed to mount the sound bar on a wall. (v p. 13)B HDMI connector (TV (ARC))Use the included HDMI cable to connect an ARC function-compatible TV. (v p. 16)C AUX audio input connectorUse a commercially available 3.5 mm stereo audio cable to connect an audio device. (v p. 18)D Optical digital input connector (TV OPTICAL)Use the included optical digital cable to a TV with an optical digital terminal. (v p. 17)E AC inletUsed to connect the power cord. (v p. 19)Subwoofero Rear panelA Status LEDDisplays subwoofer status.0The sound bar and subwoofer are wirelessly connected as the factory default.If no audio is output from the subwoofer, wirelessly connect the sound barand subwoofer again. (v p. 29)B BAR SYNC buttonUsed to wirelessly connect the sound bar and subwoofer. (v p. 29)C AC inletUsed to connect the power cord. (v p. 19)q weRemote control unitThis section mainly explains remote control operations.A Power button (c )Turns the sound bar power on/off. (v p. 20)Links to sound bar power and turns the subwoofer power on/off.B Input source buttons (TV, AUX, g )This selects the input source. (v p. 20)C Button to adjust subwoofer (BASS +, -)Adjusts the volume level for the subwoofer. (v p. 24)D Night mode button (NIGHT)Compresses the dynamic range (difference between loud and soft sounds) to make audio easier to hear at low volumes. (v p. 25)E Movie mode button (MOVIE)Enjoy movie theater-like surround sound. (v p. 25)F Mute button (h )This mutes the output audio. Press again to unmute. (v p. 25)G Volume buttons (VOL +, –)These adjusts the volume level. (v p. 24)H Music mode button (MUSIC)Enjoy the full presence of a wide, encompassing acoustic field. (v p. 25)I Dialog enhancer buttons (DIALOG ENHANCER 1 - 3)Adjust the volume of dialog in movies, vocals in music, etc. so these can be heard more easily. (v p. 25)Can be set to 3 levels. Set this to the desired value.NOTE0When positioning the sound bar in front of your TV, make sure the sound bar does not obstruct the TV’s remote control light sensor, etc.o When hanging the sound bar on a wallThe sound bar has a wall hook hole to hang it on a wall. When hangingit on a wall, position it in a flat, vertical position.0When hanging it on a wall, use the included wall mount template.[How to use the wall mount template]A Affix the template to the location you would like to mount the sound bar.B Screw in the wall mount screws by following the template.Consult a construction professional about the proper wall mount screws forthe material and strength of your wall.C Remove the template from the wall.D Mount the included wall mount spacer on the spine of the sound bar.Mounting the wall mount spacer creates a space for cords to pass throughbetween the sound bar and the wall.E Mount the sound bar on the wall.NOTE0To ensure safety, request a contractor perform the mounting work when mounting onto a wall.0In order to use the unit safely, do not place items on or hang items from the unit.0Be sure to fix connection cables to the wall to ensure that cannot be pulled or tripped over causing this unit to fall. Check that the unit is mounted safely after the mounting work is complete.0Also, periodically check the safety of this unit and whether there is a possibility that the unit may fall.0Denon cannot accept any responsibility for damage, injury or accidents caused by problems with the mounting location or mounting method.Positioning the subwoofer Position the subwoofer in a flat location near the sound bar.How to connect a TV depends on the connectors and functions equipped on the TV.0Enable the TV’s HDMI control function when using an HDMI cable to connect this device to your TV. (See the TV Owner’s Manual for details.) 0Turn off the TV’s speaker or minimize the volume when using this device.0HDMI cable connection is recommended, but connection can be performed without an HDMI cable.NOTE0Make sure all devices are off when connecting.0Do not plug device power cords into an outlet until all devices have been connected.Connection 1: TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel)Use the included HDMI cable to connect this device to an ARC function-compatible TV.HDMI cable (included)0The TV also needs to be compatible with the ARC function.Connection 2: TV equipped with an HDMI connector and incompatible with the ARC / TV equipped with an optical digital connectorUse the included HDMI and optical digital cables to connect this device to your TV.HDMI cable (included)0Line up the optical digital cable with the shape of the terminal to insert.Connection 3: TV equipped with an HDMI connector and incompatible with the ARC / TV equipped with an analog connectorUse the included HDMI cable and a commercially available 3.5 mm stereo audio cable to connect this device to your TV.HDMI cable (included)After completing all the connections, insert the power plug into the power outlet.Connect to household power outlet(AC 120 V, 60 Hz)X buttons 1Turn on the power of the TV and connected devices. 2Press c to turn on power to the unit.3Press the input source button.4Play the device connected to this unit.For details, see the relevant device manual.0Connect an HDMI control-compatible TV and this device via HDMI and enable the HDMI control to enable linked control from either device. (v p. 32)Status LED tableStatus LEDs change depending on the input source, input signal, etc.0Audio signal is not displayed when the input source is “Bluetooth”.Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device.XPairing a Bluetooth device for the first timePair a Bluetooth device with this unit.Once the Bluetooth device has been paired, it does not need to be paired again.1Press c to turn on power to the unit.2Press g to switch the input source to “Bluetooth”. 3Activate the Bluetooth settings on your Bluetooth device.Switches to pairing mode the first time it is used.4Select “DHT-S316” from the list of devices displayed on the screen of the Bluetooth device.Status display LED lights up in blue and this device and theBluetooth device are paired.0Pairing is canceled if the power cord is removed. Perform pairing again.Pairing with other Bluetooth devices 1Press c to turn on power to the unit.2Press g to switch the input source to “Bluetooth”. 3Activate the Bluetooth settings on your Bluetooth device.4Push g on this device until the status display LED blinks in blue.5Select “DHT-S316” from the list of devices displayed on the screen of the Bluetooth device.Status display LED lights up in blue and this device and theBluetooth device are paired.0This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th Bluetooth device is paired, it will be registered in place of the oldest registered device.0Pairing is canceled if the power cord is removed. Perform pairing again.Listening to music with a paired Bluetooth device1Press c to turn on power to the unit.2Press g to switch the input source to “Bluetooth”. 3Activate the Bluetooth settings on your Bluetooth device.4Press g.The status display LED lights up in blue and connects to the last Bluetooth device connected. If the connection is cut, performconnection again.5Play music using any app on your Bluetooth device.Perform the below operations and settings as needed.BASS+, –Adjusting the volume1Use VOL + or VOL – to adjust the volume.The selected input source LED blinks once every time the button ispushed.Adjusting the subwoofer volume1Use BASS + or BASS – to adjust the subwoofer volume.The selected input source LED blinks once every time the button ispushed.Selecting a listening mode1Press the listening mode button to select a listening mode.The status display LED blinks once in purple.Turning off the sound temporarily1Press h.The selected input source LED blinks.0To cancel, press h again.Setting the Bluetooth standby function If Bluetooth standby function is set to “on”, this device automatically turns on when Bluetooth connects via the paired Bluetooth device.In order to use this operation, the device needs to be paired with this unit in advance.1Press and hold TV for 5 seconds or more until the status display LEDs blink as indicated below.Auto standby functionIf no operations have been performed for 15 minutes or more and audio is not being output, this device automatically switches to standby.Volume limiter functionThis device is loaded with a volume limiter function which limits excessive output. If volume is above 18 when the power is off, the volume is set to 18 the next time power is turned on.If a problem should arise, first check the following:1.Are the connections correct?2.Is the set being operated as described in the owner’s manual?3.Are the other devices operating properly?If this unit does not operate properly, check the corresponding symptoms in this section.If the symptoms do not match any of those described here, consult your dealer as it could be due to a fault in this unit. In this case, disconnect the power immediately and contact the store where you purchased this unit.Power does not turn on / Power is turned offPower does not turn on.0Check whether the power plug is correctly inserted into the power outlet. (v p. 19)0If you cannot turn on the unit with the TV’s HDMI control function, press the c button to turn the unit’s power or set the Bluetooth standby function to “On”. (v p. 25)Power automatically turns off.0If no operations have been performed for 15 minutes or more and audio is not being output, this device automatically switches to standby. (Auto standby function)Operations cannot be performed through the remote control unitOperations cannot be performed through the remote control unit.0Batteries are worn out. Replace with new batteries. (v p. 5)0Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. (v p. 5)0Remove any obstacle between this unit and the remote control unit.0Insert the batteries in the proper direction, checking the f and e marks. (v p. 5)0The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light.No sound comes outNo sound comes out.0Check the connections for all devices. (v p. 12)0Insert connection cables all the way in.0Check that input connectors and output connectors are not reversely connected.0Check cables for damage.0Check that a proper input source is selected. (v p. 20)0Adjust the volume. (v p. 24)0Make sure volume is not muted. (v p. 25)No sound is produced from subwoofer.0When there is an obstacle between the sound bar and the subwoofer, remove it or place the subwoofer closer to the sound bar.0Make sure the subwoofer status display LED is lit in green. If lights are not lit, it may indicate that the sound bar and subwoofer are not wirelessly connected. Perform connection again according to the following steps.A Press the c button to turn on power to the unit.B Press and hold the subwoofer BAR SYNC button for 3 seconds or more.The subwoofer status display LED blinks once in green.C Press and hold the sound bar g and + buttons for 5 seconds or more until the subwoofer status display LEDs blink as indicated below.The sound bar and subwoofer wirelessly connect. Perform steps A to C again if they do not connect.Bluetooth playback does not workCannot pair with a Bluetooth device.0It may be that Bluetooth is not enabled on the Bluetooth device. See the Owner’s Manual of the Bluetooth device to enable the Bluetooth function.0This device may be paired with another Bluetooth device. Select this unit from the list of devices displayed on the screen of the Bluetooth device.0Bring the Bluetooth device near to this unit.0Turn the power of the Bluetooth device off and on again, and then try again.0Only 1 Bluetooth device can be connected at a time.The sound is cut off.0Bring the Bluetooth device near to this unit.0Remove obstructions between the Bluetooth device and this unit.0To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN devices and other Bluetooth devices.0Pair with the Bluetooth device again. (v p. 22)The HDMI Control function does not workThe HDMI Control function does not work.0You cannot operate devices that are not compatible with the HDMI Control function. In addition, depending on the connected device or the settings, the HDMI Control function may not work. In this case, operate the external device directly.0Check that the HDMI Control function setting is enabled on all devices connected to this unit.Perform this procedure if the display is abnormal or if operations cannot be performed.Various settings are reset to the factory default values. Make settings again.1Press c to turn on power to the unit.2Press and hold the main unit's c, d and + at the sametime for at least 5 seconds.All status display LEDs blink 4 times.3Wait for around 10 seconds after the LED turns off andthen press c.All settings return to the factory settings after the sound bar isrestarted.This unit supports the following HDMI functions.0ARC (Audio Return Channel) functionEnjoy movies, music, etc., on your TV simply by connecting an ARC function-compatible TV to this device via HDMI.0HDMI control functionConnect an HDMI control-compatible TV and this device via HDMI and enable the HDMI control to enable linked control from either device.0Input source switchingIf the TV is turned on, this device automatically powers on and switches the input source.0Power off linkThe TV power off operation is linked so this device also turns off. (Does not work if input source is “OPTICAL” or “Bluetooth”.)0Volume adjustmentThe volume of this unit can be adjusted using the TV remote control.0Audio output destination switchingIf this unit is turned on, TV audio is output from this unit. If this device is turned off, TV audio is output from the speakers of the TV. NOTE0Some functions may not operate depending on the connected TV. Check the owner’s manual of each device for details beforehand.Sound baro GeneralOperating temperature:41 °F - 95 °F (5 °C - 35 °C)Power supply:AC 120 V, 60 HzPower consumption:40 WPower consumption in standby mode:0.3 WPower consumption in Bluetooth standby: 1.6 WSampling frequency:32 kHz, 44.1 kHz, 48 kHzSupported audio formats:Linear PCM, Dolby Digital, DTS Digital Surroundo Bluetooth sectionCommunications system:Bluetooth Version 4.2Transmission power:Power Class 2Maximum communication range:Approx. 32.8 ft/10 m in line of sight zUsed frequency range: 2.4 GHz bandModulation scheme:FHSS (Frequency-Hopping Spread Spectrum)Supported profiles:A2DP (Advanced Audio Distribution Profile) 1.3AVRCP (Audio Video Remote Control Profile) 1.6Corresponding codec:SBCTransmission range (A2DP):20 Hz – 20,000 Hzz The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.o Dimensions (Unit : in. (mm))oWeight : 3 lbs 16 oz (1.8 kg)Subwoofero GeneralOperating temperature:41 °F - 95 °F (5 °C - 35 °C) Power supply:AC 120 V, 60 HzPower consumption:40 WPower consumption in standby mode:0.26 WPower consumption in Bluetooth standby: 1.1 Wo Dimensions (Unit : in. (mm))12 5/8 (318)6 3/4 (171)13 1/2(342)o Weight: 11 lbs 7 oz (5.2 kg)3520 10646 00ADACopyright © 2018 D&M Holdings Inc. All Rights Reserved.。
欧洲电子产品说明书
Dimensions: [mm]7443641000B7443641000B7443641000B7443641000B7443641000BT e m p e r a t u r eT pT L7443641000BFurther informationComponent Libraries:Altium_WE-HCF (23a)Downloads_CADENCE_WE-HCF (23a)Download_CadStar_WE-HCF (20a)Eagle_WE-HCF (23a)Download_IGS_WE-HCF-2818BPSpice_WE-HCF (22a)Download_STP_WE-HCFT-2818BSpectre_WE-HCF (23a)Free Sample Order:Order free samples of this article directly here!Tutorials:■Single Coil Inductors (PDF)■Redefining Rated Current Measurements for Power Inductors (PDF)REDEXPERT:Calculate losses for 7443641000B in REDEXPERTWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODALa003.0012023-11-30DIN ISO 2768-1mDESCRIPTIONWE-HCF SMT High CurrentInductor ORDER CODE7443641000BSIZE/TYPE BUSINESS UNIT STATUS PAGECautions and Warnings:The following conditions apply to all goods within the product series of WE-HCF of Würth Elektronik eiSos GmbH & Co. KG:General:•This electronic component was designed and manufactured for use in general electronic equipment.•Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are especially required and/or if there is the possibility of direct damage or human injury.•Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer. •The component was designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the wire insulation may be damaged or dissolved.•Do not drop or impact the components, as the core may flake apart.•Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not guarantee any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and sustainability over time.•The customer is responsible for the functionality of their own products. All technical specifications for standard products also apply to customer specific products.Product specific:Soldering:•The solder profile must comply with the Würth Elektronik technical soldering specification. All other profiles will void the warranty. •All other soldering methods are at the customers’ own risk.Cleaning and Washing:•Washing agents used during the production to clean the customer application may damage or change the characteristics of the wire insulation, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product. Potting:•If the product is potted in the costumer application, the potting material may shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the core. Expansion could damage the core or wire contacts. Werecommend a manual inspection after potting to avoid these effects. Storage Conditions:• A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment.•Do not expose the components to direct sunlight.•The storage conditions in the original packaging are defined according to DIN EN 61760-2.Packaging:•The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured. Handling:•Violation of the technical product specifications such as exceeding the nominal rated current will void the warranty•Applying currents with audio-frequency signals may result in audible noise due to the magnetostrictive material properties. •Due to heavy weight of the components, strong forces and high accelerations may have the effect to damage the electrical connection or to harm the circuit board and will void the warranty.These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable.However, no responsibility is assumed for inaccuracies or incompletenessWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODALa003.0012023-11-30DIN ISO 2768-1mDESCRIPTIONWE-HCF SMT High CurrentInductor ORDER CODE7443641000BSIZE/TYPE BUSINESS UNIT STATUS PAGEImportant NotesThe following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at .3. Best Care and AttentionAny product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODALa003.0012023-11-30DIN ISO 2768-1mDESCRIPTIONWE-HCF SMT High CurrentInductor ORDER CODE7443641000BSIZE/TYPE BUSINESS UNIT STATUS PAGE。
EM316WERMT-S2中文资料(MRV Communications)中文数据手册「EasyDatasheet - 矽搜」
NA/22 (@1310 nm)
1-100 m/ 0-45 km
NA/32 (@1550 nm)
1-100 m/ 30-130 kmห้องสมุดไป่ตู้
芯片中文手册,看全文,戳
媒体转换器 中继器和优化器
EM316ERM
双纤
订购信息
Model
功能
EM316ERM/M
10Base-T Ethernet Copper to Multi-mode, Dual Fiber with IP-Less™ Remote Management.
RJ-45/SC
RJ-45/SC
波长（ nm） 端口 /链路
NA/1310, 1550 NA/1310, 1550 NA/1550, 1590
NA/1550, 1310
NA/1550, 1310
NA/1590, 1550
¹ Default connectors listed, others optional. ² Higher budgets available. ³ Distances are approximate and assume 9µ SM and 62.5µ MM. 125Mbps
EM316ERM/MX
10Base-T Ethernet Copper to Extended Multi-mode, Dual Fiber with IP-Less™ Remote
Management.
EM316ERM/S1
10Base-T Ethernet Copper to Single-mode, Dual Fiber with IP-Less™ Remote Management.
检测允许使用是直连或交叉电缆
NEMA L5-30 30A 125V AC 2P-3W 电缆插座说明书
DescriptionNEMA L5-30 30A, 125V/AC, 2P-3WDesign features for plugs & connector• All nylon construction• EPDM gasket seals cord hole from dust and debris •Back wire terminal clamps for easy secure wiring•Individual wiring compartments with tapered channel for easy insertion of wires•Clear cover over wiring compartments allows easy inspection of wiring terminations• Rating printed on side of device•Largest-in-class grommet size allows for entire cord size rangeDesign features for receptacles• Rugged glass filled nylon body•Clearly marked rating, NEMA configuration and approval listings on receptacle face•One piece brass contacts offer superior performance and minimum heat rise•Back and side wiring terminal clamps for easy, secure wiringDesign features for flanged inlet & outlet• All nylon construction• Mounting holes interchangeable with competitive units • Back wire terminal clamps for easy, secure wiring •Individual wiring compartments with tapered channel for easy insertion of wiresIndustrial gradeL5-30 locking devicesCatalog No.DescriptionAmps VoltsColorAHL530P Ultra grip plug30125Black & white AHIGL530P Ultra grip plug, isolated ground 30125Orange AHL530C Ultra grip connector 30125Black & white AHL530R Single receptacle30125Black AHIGL530R Single receptacle, isolated ground 30125Orange AHL530FO Flanged outlet 30125Black & white AHL530FIFlanged inlet30125Black & whiteAHL530PAHL530RAHL530FOAHL530CCompliances, specifications and availability are subject to change without notice.Project Name:Prepared By:Project Number:Date:Catalog Number:Type:Table 1.NEMA L5-30 Industrial Grade Locking Devices2EATON Technical DataEffective January 2014Industrial gradeL 5-30 locking devicesCatalog No.NEMA L5-30 Plugs & ConnectorNEMA Config NEMA L5-30Wiring Type Back wireEnvironmental Specifications Flammability: Meets UL94 requirements; V2 ratedTemperature Rating: -40°C to 60°C (-40°F to 140°F)except flat cable: -40°C to 75°C (-40°F to 167°F)Electrical Specifications Dielectric Voltage: Twice the device rating + 1000V per UL498Current Interrupting: Yes, at full-rated currentTemperature Rise: Max. 30ºC (86°F) after 50 cycles of overload at 150% of rated current (DC)Mechanical Specifications Terminal Accommodation: #16 - #8 AWGVoltage Ratings: Permanently marked on deviceNEMA L5-30 30A, 125V/AC, 2P-3W Catalog No.NEMA L5-30 Plugs & ConnectorNEMA Config NEMA L5-30Outer Shell Nylon Interior Body NylonTerminal Retainer Polycarbonate BladesBrassLine Contacts Bronze, tin plated Terminal Clamps Steel, tin platedTerminal Screws #10-32 brass, zinc plated (neutral screw)Ground Screw #10-32 brassAssembly Screws Steel, nickel plated Gasket/Dust Shield EPDMCord Clamp Screws Steel, nickel plated Cord Clamp NylonCompliances, specifications and availability are subject to change without notice.Plugs & ConnectorProject Name:Prepared By:Project Number:Date:Catalog Number:Type:T able 2. SpecificationsT able 3. MaterialsProduct DimensionsFigure 1. AHL530P Figure 2. AHL530C Figure 3. Base Angle3EATON Technical DataEffective January 2014Industrial gradeL 5-30 locking devicesCatalog No.NEMA L5-30 Single ReceptacleNEMA L5-30 Isolated Ground Single ReceptacleNEMA Config NEMA L5-30NEMA L5-30Wiring Type Back & side wireBack & side wireEnvironmental Specifications Flammability: Meets UL94 requirements; V0 ratedTemperature Rating: -40°C to 70°C (-40°F to 158°F)Flammability: Meets UL94 requirements; V0 rated Temperature Rating: -40°C to 70°C (-40°F to 158°F)Electrical Specifications Dielectric Voltage: ≤300V: 2000V, 301-600V: 3000V per UL498Current Interrupting: Yes, at full-rated currentTemperature Rise: Max. 30ºC (86°F) after 250 cycles of overload @ 200% of rated current (DC)Dielectric Voltage: ≤300V: 2000V, 301-600V: 3000V per UL498Current Interrupting: Yes, at full-rated currentTemperature Rise: Max. 30ºC (86°F) after 50 cycles of overload @ 150% of rated current (DC)Mechanical Specifications Terminal Accommodation: #14 - #8 AWGVoltage Ratings: Permanently marked on device Terminal Accommodation: #14 - #8 AWG Voltage Ratings: Permanently marked on deviceNEMA L5-30 30A, 125V/AC, 2P-3W Catalog No.NEMA L5-30 Single ReceptacleNEMA L5-30 Isolated Ground Single ReceptacleNEMA ConfigNEMA L5-30NEMA L5-30Face Glass-filled nylon Glass-filled nylon BaseGlass-filled nylonGlass-filled nylonMounting Strap 0.050" thick steel, zinc plated 0.050" thick steel, zinc plated Line Contacts 0.041" thick brass0.041" thick brassTerminal Screws #10-32 brass, nickel plated (neutral screw)#10-32 brass, nickel plated (neutral screw)Ground Screw#10-32 brass (green)#10-32 brass (green)Terminal Clamps/Plates 0.041" thick brass 0.041" thick brass Ground Contacts 0.041" thick brass0.041" thick brassBack Plate0.041" thick brass, nickel plated 0.041" thick brass, nickel plated Mounting ScrewsSteel, zinc platedSteel, zinc platedSingle ReceptaclesT able 4. SpecificationsT able 5. MaterialsProject Name:Prepared By:Project Number:Date:Catalog Number:Type:Product DimensionsFigure 4. AHL530RCompliances, specifications and availability are subject to change without notice.4EATON Technical DataEffective January 2014Industrial gradeL 5-30 locking devicesCatalog No.NEMA L5-30 Flanged OutletNEMA L5-30 Flanged InletNEMA Config NEMA L5-30NEMA L5-30Wiring Type Back wireBack wireEnvironmental Specifications Flammability: Meets UL94 requirements; V2 ratedTemperature Rating: -40°C to 60°C (-40°F to 140°F)Flammability: Meets UL94 requirements; V2 rated Temperature Rating: -40°C to 60°C (-40°F to 140°F)Electrical Specifications Dielectric Voltage: ≤300V: 2000V, 301-600V: 3000V per UL498Current Interrupting: Yes, at full-rated currentTemperature Rise: Max. 30ºC (86°F) after 50 cycles of overload @ 150% of rated current (DC)Dielectric Voltage: ≤300V: 2000V, 301-600V: 3000V per UL498Current Interrupting: Yes, at full-rated currentTemperature Rise: Max. 30ºC (86°F) @ maximum rated current (DC)Mechanical Specifications Terminal Accommodation: #14 - #8 AWGVoltage Ratings: Permanently marked on deviceTerminal Accommodation: #14 - #8 AWG Voltage Ratings: Permanently marked on deviceNEMA L5-30 30A, 125V/AC, 2P-3W Catalog No.NEMA L5-30 Flanged OutletNEMA L5-30 Flanged InletNEMA Config NEMA L5-30NEMA L5-30Outer Shell Nylon Nylon Interior Body NylonNylonTerminal Retainer Polycarbonate Polycarbonate BladesN/A0.062" thick brass Line Contacts 0.031" thick bronze N/A Terminal Clamps SteelSteelTerminal Screws #10-32 brass, nickel plated (neutral screw)#10-32 brass, nickel plated (neutral screw)Ground Screw #10-32 brass (green)#10-32 brass (green)Assembly Screws Steel, nickel plated Steel, nickel plated Mounting Screws Steel, zinc plated Steel, zinc platedCompliances, specifications and availability are subject to change without notice.Flanged Outlet & InletProject Name:Prepared By:Project Number:Date:Catalog Number:Type:T able 6. SpecificationsT able 7. MaterialsProduct DimensionsFigure 5. AHL530FO Figure 6. AHL530FI Figure 7. T op ViewTechnical DataEffective January 2014Industrial gradeL 5-30 locking devicesElectrical Sector 203 Cooper CirclePeachtree City, GA 30269United States Electrical Sector Canada Operations 5925 McLaughlin RoadMississauga, Ontario, L5R 1B8CanadaEatonCanada.ca Electrical Sector Mexico Operations Carr. Tlalnepantla -Cuautitlan Km 17.8 s/n Col. Villa Jardin esq.Cerrada 8 de MayoCuautitlan, Mexico CP 54800Mexico Eaton.mxEaton is a registered trademark. All other trademarks are property of their respective owners.Eaton1000 Eaton Boulevard Cleveland, OH 44122United States © 2014 EatonAll Rights Reserved Printed in USAPublication No. 125-0095-13January 2014Certifications & CompliancesProject Name:Prepared By:Project Number:Date:Catalog Number:Type:KEY:cULusUL CSAFed SpecNOMROHSAHIGL530P ••AHL530C ••••AHL530R •••••AHIGL530R ••••AHL530FO ••••AHL530FI•••Parts are manufactured and designed in accordance with article 4 of the European Union’s RoHS2 directive 2011/65/EUCompliances, specifications and availability are subject to change without notice.。
209-3SURSYGW-S530-A3 LED规格书
LAMP209-3SURSYGW/S530-A3Features• Two chips are matched for uniform light output, wide viewing angle• Long life-solid state reliability• I.C. compatible/Low power consumption• Pb free• The product itself will remain within RoHS compliant version• Compliance with EU REACH• Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm)Description• The 209-3LED lamp contain two integral chips and is available as both bicolor and bipolar types. • The Brilliant Red and Brilliant Yellow Green light is emitted by diodes of AlGaInP and AlGaInP.• Type of bipolar lamps are both White Diffused and Water Clear while the bicolor are White Diffused.Applications• TV set• Monitor• Telephone• ComputerDevice Selection GuideChipMaterialsEmitted Color Resin ColorAlGaInP Brilliant RedWhite Diffused AlGaInP Brilliant Yellow GreenAbsolute Maximum Ratings (Ta=25℃)Parameter Symbol Rating UnitContinuous Forward Current I F SUR 25mA SYG 25Peak Forward Current (Duty 1/10 @ 1KHZ)I FP SUR 60mA SYG 60Reverse Voltage V R 5 VPower Dissipation Pd SUR 60mW SYG 60Operating Temperature T opr-40 ~ +85 ℃Storage Temperature Tstg -40 ~ +100 ℃Soldering Temperature T sol260 ℃for 5 sec.Electro-Optical Characteristics (Ta=25℃)Parameter Symbol Min. Typ. Max. Unit ConditionForward Voltage V F SUR 1.7 2.0 2.4V I F=20mA SYG 1.7 2.0 2.4Reverse Current I R SUR ----- ----- 10μA V R=5V SYG ----- ----- 10Luminous Intensity I V SUR 25 50 ----mcd I F=20mA SYG 10 20 ----Viewing Angle 2θ1/2 SUR ---- 80 ----deg I F=20mA SYG ---- 80 ----Peak Wavelength λp SUR ---- 632 ----nm I F=20mA SYG ---- 575 ----Dominant Wavelength λd SUR ---- 624 ----nm I F=20mA SYG ---- 573 ----Spectrum Radiation Bandwidth △λSUR ---- 20 ----nm I F=20mA SYG ----- 20 ----Typical Electro-Optical Characteristics CurvesSURRelative Intensity vs. Wavelength (Ta=25℃)Directivity (Ta=25℃)R e l a t i v e I n t e n s i t y (a .u .)R a d i a t i o n A n g l eWavelength (nm)Relative Intensity (a.u.)Forward Current vs. Forward Voltage (Ta=25℃)Relative Intensity vs. Forward Current (Ta=25℃)F o r w a r d C u r r e n t (m A )R e l a t i v e I n t e n s i t y (a .u .)05101520250.00.51.01.5Forward Voltage (V)Forward Current (mA)Relative Intensity vs. Ambient Temp.Forward Current vs. Ambient Temp.R e l a t i v e I n t e n s i t y (a .u .)253035404550556065700.00.51.01.52.0F o r w a r d C u r r e n t (m A )020*********10203040Forward Current (mA)Ambient Temperature Ta (℃)SYGRelative Intensity vs. Wavelength (Ta=25℃)Directivity (Ta=25℃)R e l a t i v e I n t e n s i t y (a .u .)R a d i a t i o n A n g l eWavelength (nm)Relative Intensity (a.u.)Forward Current vs. Forward Voltage (Ta=25℃)Relative Intensity vs. Forward Current (Ta=25℃)F o r w a r d C u r r e n t (m A )R e l a t i v e I n t e n s i t y (a .u .)05101520250.00.51.01.5Forward Voltage (V)Forward Current (mA)Chromaticity Coordinate vs. Forward Curren t (Ta=25℃)Forward Current vs. Ambient Temp.R e l a t i v e I n t e n s i t y (a .u .)253035404550556065700.00.51.01.52.0F o r w a r d C u r r e n t (m A )020*********10203040Forward Current (mA)Ambient Temperature Ta (℃)Package Dimension1 2 3Note: Note:1. All dimensions are in millimeters2. The height of flange must be less than 1.5mm(0.059").3. Without special declared, the tolerance is ±0.25mm.Moisture Resistant Packing Materials Label Explanation■ Packing Quantity1.500 PCS/1 Bag, 4 Bags/1 Inner Carton2. 10 Inner Cartons/1 Outside CartonNotes1. Lead FormingDuring lead formation, the leads should be bent at a point at least 3mm from the base of the epoxy bulb.Lead forming should be done before soldering.Avoid stressing the LED package during leads forming. The stress to the base may damage the LED’s characteristics or it may break the LEDs.Cut the LED leadframes at room temperature. Cutting the leadframes at high temperatures may cause failure of the LEDs.When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the lead position of the LED. If the LEDs are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the LEDs.2. Storage The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from Everlight and the storage life limitsare 3 months. If the LEDs are stored for 3 months or more, they can be stored for a year in a sealed container with a nitrogen atmosphere and moisture absorbent material.Please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can occur.3. Soldering Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to epoxy bulb,and soldering beyond the base of the tie bar is recommended.Recommended soldering conditions:Hand SolderingDIP SolderingTemp. at tip of iron300℃ Max. (30W Max.) Preheat temp.100℃ Max. (60 sec Max.) Soldering time 3 sec Max. Bath temp. & time 260 Max., 5 sec Max Distance 3mm Min.(From solderjoint to epoxy bulb)Distance 3mm Min. (From solderjoint to epoxy bulb)Recommended soldering profileAvoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Dip and hand soldering should not be done more than one timeAfter soldering the LEDs, the epoxy bulb should be protected from mechanical shock or vibration until the LEDs return to room temperature.A rapid-rate process is not recommended for cooling the LEDs down from the peak temperature.Although the recommended soldering conditions are specified in the above table, dip or hand soldering at the lowest possible temperature is desirable for the LEDs.Wave soldering parameter must be set and maintain according to recommended temperature and dwell time in the solder wave.4. CleaningWhen necessary, cleaning should occur only with isopropyl alcohol at room temperature for a duration of no more than one minute. Dry at room temperature before use.Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence of ultrasonic cleaning on the LEDs depends on factors such as ultrasonic power and the assembled condition. Ultrasonic cleaning shall be pre-qualified to ensure this will not cause damage to the LED5. Heat ManagementHeat management of LEDs must be taken into consideration during the design stage of LED application. The current should be de-rated appropriately by referring to the de-rating curve found in each product specification.The temperature surrounding the LED in the application should be controlled. Please refer to the data sheet de-rating curve.6. ESD (Electrostatic Discharge)The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.When handling the products, the following measures against electrostatic discharge are strongly recommended: Eliminating the chargeGrounded wrist strap, ESD footwear, clothes, and floorsGrounded workstation equipment and toolsESD table/shelf mat made of conductive materialsProper grounding is required for all devices, equipment, and machinery used in product assembly.Surge protection should be considered when designing of commercial products.If tools or equipment contain insulating materials such as glass or plastic,the following measures against electrostatic discharge are strongly recommended:Dissipating static charge with conductive materialsPreventing charge generation with moistureNeutralizing the charge with ionizers7. Directions for useThe LEDs should be operated with forward bias. The driving circuit must be designed so that the LEDs are not subjected to forward or reverse voltage while it is off. If reverse voltage is continuously applied to the LEDs, it may cause migration resulting in LED damage.8. OtherAbove specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification.When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not complywith the absolute maximum ratings and the instructions included in these specification sheets.These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.。
艾特顿167123产品说明书
Eaton 167123Eaton Moeller series xEffect - FRCmM-NA RCCB. Residual currentcircuit breaker (RCCB), 40A, 2p, 300mA, type G/A, ULGeneral specificationsEaton Moeller series xEffect - FRCmM-NA RCCB167123FRCMM-40/2/03-G/A-NA401508163624280 mm71 mm35 mm0.22 kg RoHS conformUL 1053 IEC 61008 EN 61008 ÖVE E 8601 EN45545-2 IEC 61373Additionally protects against special forms of residual pulsating DC which have not been smoothed.Product Name Catalog NumberModel CodeEAN Product Length/Depth Product Height Product Width Product Weight Compliances Certifications Catalog Notes40 AIs the panel builder's responsibility. The specifications for the switchgear must be observed.7035-35 °CMeets the product standard's requirements.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Quick attachment with 2 latch positions for DIN-rail IEC/EN 60715DIN rail40 ADoes not apply, since the entire switchgear needs to be evaluated.0.3 A184 V AC - 250 V AC, 196 V AC - 305 V AC (UL)Meets the product standard's requirements.Short time-delayed10 ms delay at 50 Hz8 ms delay at 60 HzInterlocking device500 A eaton-rcd-application-guide-br019003en-en-us.pdfUL 1053 DIN Rail RCCBeaton-xeffect-industrial-switchgear-range-catalog-ca003002en-en-us.pdf Eaton's Volume 4—Circuit Protectioneaton-xeffect-frcmm-na-rccb-catalog-ca003019en-en-us.pdfDA-DC-03_FRCm03_FRCm.-NA_181019eaton-circuit-breaker-xeffect-frcmm-na-rccb-dimensions.epsETN.FRCMM-40_2_03-G_A-NAMA180503312DA-CD-f9_ul1053_2pDA-CS-f9_ul1053_2pEaton Specification Sheet - 167123eaton-xeffect-frcmm-rccb-wiring-diagram.jpgeaton-circuit-breaker-xeffect-frcmm-na-rccb-wiring-diagram.epsRated operational current for specified heat dissipation (In) 10.11 Short-circuit ratingRAL-numberPermitted storage and transport temperature - min10.4 Clearances and creepage distances10.12 Electromagnetic compatibilityMounting MethodAmperage Rating10.2.5 LiftingRated fault current - maxTest circuit range10.2.3.1 Verification of thermal stability of enclosures Tripping timeFitted with:Rated residual making and breaking capacity Application notesBrochuresCatalogsCertification reports DrawingseCAD modelInstallation instructions mCAD model Specifications and datasheets Wiring diagramsFrequency rating50 Hz / 60 Hz10.8 Connections for external conductorsIs the panel builder's responsibility.Fault current rating300 mATerminal protectionFinger and hand touch safe, DGUV VS3, EN 50274Special featuresFRCmM-NAResidual current circuitbreakersType G/A (ÖVE E 8601)Sensitivity typePulse-current sensitiveAmbient operating temperature - max40 °CHeat dissipation per pole, current-dependent3.9 WClimatic proofing25-55 °C / 90-95% relative humidity according to IEC 60068-2Built-in depth70.5 mmShort-circuit ratingMax. admissible back-up fuse: 63 A gG/gL, 70 A class J fuse (UL)FeaturesResidual current circuit breakerAdditional equipment possibleLifespan, electrical4000 operationsTerminal capacity (cable)M5 (with cross-recessed screw as defined in EN ISO 4757-Z2, PZ2)Connectable conductor cross section (solid-core) - min1.5 mm²Contact position indicator colorRed / green10.9.3 Impulse withstand voltageIs the panel builder's responsibility.Number of polesTwo-poleTerminal capacity (solid wire)1.5 mm² - 35 mm²Ambient operating temperature - min-25 °C10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.Rated short-circuit strength10 kA with back-up fuse5 kA (UL, as per CSA)10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.Used withFRCmM-NAResidual current circuit breakersType G/A (�VE E 8601)Mounting positionAs requiredEquipment heat dissipation, current-dependent7.8 W10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.10.9.4 Testing of enclosures made of insulating materialIs the panel builder's responsibility.ApplicationSwitchgear for export to North America (UL-listed)10.3 Degree of protection of assembliesDoes not apply, since the entire switchgear needs to be evaluated.Voltage rating (IEC/EN 60947-2)240 V AC / 415 V ACVoltage typeACTerminal capacity (stranded cable)16 mm² (2x)Leakage current typeAFrame45 mmBuilt-in width (number of units)35 mm (2 SU)Terminals (top and bottom)Lift terminalsAmbient humdity range5 - 95 %Impulse withstand current3 kA (8/20 μs) surge-proofWidth in number of modular spacings210.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effectsMeets the product standard's requirements.Lifespan, mechanical10000 operationsStatus indicationWhite / blue10.9.2 Power-frequency electric strengthIs the panel builder's responsibility.Connectable conductor cross section (solid-core) - max35 mm²Degree of protectionIP20, IP40 with suitable enclosureIP20Rated short-time withstand current (Icw)10 kAOvervoltage tested - max530 VPollution degree210.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.Connectable conductor cross section (multi-wired) - min 1.5 mm²Rated impulse withstand voltage (Uimp)4 kV10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.FunctionsShort-time delayed trippingVoltage rating (UL)480Y/277 V, 60 HzConnectable conductor cross section (multi-wired) - max 16 mm²TypeCurrent test marks as perinscriptionMaximum operatingtemperature is 75 °C:Starting at 40 °C, the max.permissible continuouscurrent decreases by 2.5%for every 1 °CThe maximum operatingcurrent of back-up fuse mustnot exceed the residualcurrent circuit breaker'srated operational current10.2.2 Corrosion resistanceMeets the product standard's requirements.10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard's requirements.10.2.7 InscriptionsMeets the product standard's requirements.Eaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia3 kA60 °C40 A gG/gL0.3 A200 mA277 V440 VSurge current capacity Permitted storage and transport temperature - max Admissible back-up fuse overload - max Rated fault current - min Pick-up current Rated operational voltage (Ue) - max Rated insulation voltage (Ui)。
BL6531用户手册 V1.0
电能表专用 MCU 芯片
概述 ................................................................................................................................ 9
1.1 产品概述.................................................................................................................................... 9 1.2 结构框图.................................................................................................................................. 10 1.3 管脚定义.................................................................................................................................. 11 1.4 封装形式................................................................................................................................. 14 第二章 CPU 结构 ...................................................................................................................... 15
ET3260 ET3260A 用户手册说明书
ET32606½数字万用表ET3260A用户手册Array杭州中创电子有限公司安全注意事项为避免造成人身伤害，防止产品损坏，请务必按照规定使用本产品。
在完全理解和满足下列警告之前，不要继续下一步。
◆安全接地。
请确保本产品电源线的接地端子与保护接地端可靠连接，将仪器插入已接地的电源插座。
◆使用合适的保险丝。
为提供连续防火保护，请仅使用指定类型和额定值的保险丝。
◆前/后开关安全事项。
当前/后端子组上存在信号时，请勿更改前面板上前/后开关的位置。
此开关一般不能作为活动多路复用器使用。
在高电压或高电流情况下进行切换可能造成仪器损坏并可能导致电击。
◆正确使用引线套件。
请勿使用已损坏或磨损的测试引线套件。
可能导致仪器损坏或人身伤害。
使用探头时，手指应保持在探头的护指装置后面。
接线时，应先接公共线然后再接带电的测试线。
拆线时，应先拆除带电的测试线。
◆若产品工作失常，请勿使用。
其保护措施可能已遭破坏，不要安装代用零件或对产品进行擅自调整。
请将产品返回维修或由专业人员检查以确保其安全特性。
◆切勿在易燃易爆环境中使用本产品。
◆保护限值。
在不超过保护限值的情况下，本产品提供的保护电路可防止仪器损坏和电击危险。
为确保安全操作仪器，请勿超过前面板和后面板上标示的保护限值，定义如下：注意：上图所示为前面板端子。
后面板端子与前面板端子基本相同，只是没有12A电流档。
电流保护熔断器在后面板上。
输入端子保护极限如下：主输入（HI和LO）端子。
HI和LO输入端子用于电压、电阻、电容、连通性、频率和二极管测试。
这两个端子保护极限如下：1)HI到LO保护极限。
HI到LO保护极限为1000VDC或750VAC，这也是可测量的最大电压。
此极限也可表示为最大1000Vpk。
2)LO到接地保护极限。
LO输入端子相对于地来说最大可以安全“浮动”到500Vpk。
感应端子保护限值HI和LO感应端子仅在四线电阻和比例测量中使用。
所有端子对保护限值为200Vpk。
S530-A3中文资料
1
Solder Heat
2 Temperature Cycle
3
Thermal Shock
4
High Temperature Storage
5
Low Temperature Storage
6 DC Operating Life
7
High Temperature / High Humidity
TEMP : 260℃ ± 5 ℃
● The led lamps are available with
different colors, intensities,
epoxy colors, etc.
█ Applications :
● TV set ● Monitor ● Telephone ● Computer
PART NO.
333-2SDRC/S530-A3
Material AlGaInP
█ Notes :
1. All dimensions are in millimeters. 2. An epoxy meniscus may extend about
1.5mm(0.059'') down to the lead. 3. Tolerances unless Dimension ±0.25mm.
℃
Storage Temperature
Tstg -40 to +100 ℃
Soldering Temperature Tsol
260 ± 5
℃
Electrostatic Discharge ESD
2000
V
Power Dissipation
Pd
60
testo 316-1-EX 气体泄漏检测仪使用说明书
testo 316-1-EX gas leak detector 0560 3163Instruction manualContents Contents1About this document (3)2Safety and disposal (3)2.1Security (3)2.2Disposal (4)3Product-specific information (5)4Intended use (5)4.1Special conditions for the usage (6)5Product description (7)5.1Instrument overview (7)6First steps (8)6.1Getting to know the product (8)6.1.1Switching the instrument on and off (8)6.2Establishing a Bluetooth® connection (9)6.2.1Establishing a Bluetooth® connection to the testo Smart App (9)7Using the product (10)7.1Controls (10)7.1.1Implementing settings (12)7.2Carrying out a function test (15)7.3Carrying out gas detection (15)8Maintaining the product (19)8.1Charging the rechargeable battery (19)8.2Cleaning the instrument (19)8.3Cleaning the sensor (19)9Technical data for testo 316-1-EX (21)10Tips and assistance (22)10.1Questions and answers (22)10.2Error codes (22)10.2.1Hard Reset (22)10.3Accessories and spare parts (22)11Support (22)1 About this document1 About this document•The instruction manual is an integral part of the instrument.•Please keep this documentation available for future reference.•Always use the complete original instruction manual.•Please read this instruction manual through carefully and familiarize yourself with the product before putting it to use.•Hand this instruction manual on to any subsequent users of the product. •Pay particular attention to the safety instructions and warning advice in order to prevent injury and damage to the product.2 Safety and disposal2.1 SecurityGeneral safety instructions•Only operate the product properly, for its intended purpose, and within the parameters specified in the technical data.•Do not apply any force.•Do not operate the instrument if there are signs of damage on the housing, mains unit or connected cables.•Dangers may also arise from objects to be measured or the measuring environment. Always comply with the locally valid safety regulations when carrying out measurements.•Do not store the product together with solvents.•Do not use any desiccants.•Only perform maintenance and repair work on this instrument that is described in this documentation. Follow the prescribed steps exactly when doing the work.•Use only original spare parts from Testo.•Only use the original mains unit from Testo.•The substantial safety and health requirements are fulfilled in accordance with the following norms:o EN IEC 60079-0:2018o EN 60079-11:2012•The gas leak detector must not be exposed to the processes that generate significant electrostatic charges.32 Safety and disposal4Batteries• Improper use of batteries may cause the batteries to be destroyed, or lead to injury due to current surges, fire or escaping chemicals.• Do not expose the batteries to heavy impacts, water, fire or temperatures in excess of 60 °C.• In the event of contact with battery acid: rinse affected areas thoroughly with water, and if necessary consult a doctor.• Only charge the battery using the original Testo mains unit supplied.• Immediately stop the charging process if this is not completed in the given time.WarningsAlways pay attention to any information denoted by the following warnings. Implement the precautionary measures specified!DANGER Risk of death!WARNINGIndicates possible serious injury.CAUTIONIndicates possible minor injury.Indicates possible damage to equipment.2.2 Disposal• Dispose of faulty rechargeable batteries and spent batteries in accordance with the valid legal specifications.• At the end of its useful life, deliver the product to the separate collection point for electric and electronic devices (observe local regulations) or return the product to Testo for disposal.•WEEE Reg. No. DE 753343523 Product-specific information 3 Product-specific information•Do not carry out measurements on live components.•Do not operate the instrument in environments above 80 %RH (condensing). •Observe the permissible storage and transport temperatures and the permissible operating temperature (e.g. protect the measuring instrument from direct sunlight)!•Always carry out a function test before searching for gas leaks.•If the instrument is misused or subjected to force, all warranty claims will be voided!•Do not allow the sensor to come into contact with moisture or acids, as it will react cross-sensitively.4 Intended useThe testo 316-1-EX is a gas leak detector for the short-term detection of leaks in gas systems in potentially explosive atmospheres of the classATEX II 2 G Ex ib IIC T1Gb according to Directive 2014/34/EU (ATEX).The following substances can be detected:•Methane CH4•Propane C3H8•Butane C4H10•Hydrogen H2The instrument is not suitable for precise measurement of the gas concentration.A flammable substance in the air has a lower explosive limit (LEL) and an upper explosive limit (UEL).The air/gas mixture is flammable anywhere between these two limits, potentially leading to an explosion (critical range).Below the LEL, the mixture is too lean for an explosion, and above the UEL it is too rich (non-critical range).The explosive limits depend on the substance:-Methane CH4: LEL 4.4 vol.% / UEL 16.5 vol.%-Propane C3H8: LEL 1.7 vol.% / UEL 10.9 vol.%-Butane C4H10: LEL 1.4 vol.% / UEL 9.4 vol.%-Hydrogen H2: LEL 4.0 vol.% / UEL 77.0 vol.%54 Intended use 6- Do not use the instrument as a monitoring instrument for personal safety! The instrument is not protective equipment!- Do not use the instrument as a gas analyzer! The sensor detects almost all combustible gases alike.4.1 Special conditions for the usage • The gas leak detector must only be used in potentially explosive atmospheres of the IIC T1 class.• The gas leak detector must only be used in the ambient temperature range from -5 °C to +50 °C.• The gas leak detector must not be exposed to the processes that generate significant electrostatic charges.• The gas leak detector must only be recharged using the corresponding charger outside of a potentially explosive atmosphere in the ambient temperature range from 0 °C…+45 °C.• The charging voltage must not be higher than U m = 8.5 V.This voltage can be provided using one of the following measures in accordance with IEC 60079-14:o making sure that U m in a SELV/PELV system can not be higher than50 V AC or 120 V DC;o using a safety transformer that fulfils all requirements according toIEC 61558-2-6 or an equivalent technical standard;o connecting it directly to an instrument that fulfils all requirementsaccording to IEC 60950 and its successors, IEC 61010-1 or anequivalent technical standard; ousing a direct power supply source, e.g cells or batteries.• The expected short-circuit current during the charging process must not exceed 50 A.Use only the supplied mains unit to fulfil all charging requirements.5 Product description5 Product description5.1 Instrument overviewSymbol explanation76 First steps86 First steps6.1 Getting to know the product6.1.1 Switching the instrument on and off Switching onOnly switch on the instrument in fresh air, since automatic zeroing is carried out when the instrument is switched on. The ambient temperature and ambient humidity during zeroing should correspond to the ambient conditions at themeasuring location. If necessary, zero again manually at the measuring location (switch off and on again).If the unit is not used for a prolonged period of time, the sensor willbecome contaminated. Particularly if the instrument has not been in operation for a prolonged period of time (> 2 weeks), it should be left switched on for a while before being used. The longer it has not been in operation, the longer this additional warming-up phase should be.Please note that the instrument switches itself off by default after 10 min of inactivity.1 Press and hold down (1 sec) the On/Off key.Warm-up phase (HEAT)↓ The instrument starts up. With regular use, the warm-up period takes approx. 30 sec and is symbolized by the text “HEAT” and acountdown.As long as the sensor LED is flashing orange, the instrument is not ready for use.↓ Following the warm-up period, the measurement view is displayed.Self-cleaning (CLN)↓ If the sensor is dirty, the warm-up phase is followed by the sensor cleaning phase. This usually happens when the instrument has notbeen used for several days. The self-cleaning is symbolized by the text “CLN” and a countdown.Switching offCAUTION Caution! Risk of burns due to hot sensor head after prolongedoperation.- Before touching the sensor head or packing the instrument: switchinstrument off and let the sensor head cool down.6 First steps91 Press and hold down (1 sec) the On/Off key.↓ The instrument is switched off.Auto OFFAfter 10 minutes of inactivity (no user input, no gas concentration above the warning threshold), the instrument switches itself off. The switch-off is signalled beforehand by an alarm sound, red flashing of the sensor LED and a 10 sec countdown.You can prevent the instrument from switching off by pressing any key within 10 seconds.Enabling/disabling the Auto-OFF function:1 Press the Sound and UNIT keys simultaneously for 1 sec.↓ Enabling/disabling is confirmed by "AOFF ON" or "AOFF OFF".6.2 Establishing a Bluetooth ® connectionThe instrument can be connected to the testo Smart App viaBluetooth ® connection.✓ The gas leak detector is switched on.6.2.1Establishing a Bluetooth ® connection to the testo Smart AppTo establish a connection via Bluetooth ®, you need atablet or smartphone with the Testo Smart App alreadyinstalled on it.You can get the App for iOS instruments in the App Storeor for Android instruments in the Play Store.Compatibility:Requires iOS 13.0 or later/Android 8.0 or later,requires Bluetooth ® 4.2.1 Open the testo Smart App.↓ The app automatically searches for Bluetooth ® devices in the vicinity.2 In the Bluetooth menu, check whether the required instrument is connected.7 Using the product10 ↓ If necessary, switch the instrument to be connected off and on again to restart the connection mode.7 Using the productFor technical reasons, the accuracy of the sensor improves with longer operating time of the sensor.For accurate measurements in ppm or calibrations, the device must be switched on for at least 10 minutes (after the warm-up phase).Please note that the instrument switches itself off by default after 10 min of inactivity. You can avoid this by disabling the Auto-off function (see chapter 6.2.1).Lighters are only suitable to a limited extent for a function test due to the different liquid gas mixtures used in commercial lighters and the selectivity of the sensor based on the gas set (GAS button).The gas leak detector can be used in conjunction with the testo Smart App .7.1 Controls✓ The instrument is switched on.✓ The app is installed on the smartphone and connected to theinstrument via Bluetooth ®.↓ Settings and controls are primarily carried out on the instrument and are transferred to the app. To a lesser extent, control via app is also possible (selection of gas type).7 Using the product1 Sound / Illumination key2 On/Off / GAS key3 Bar display4 Mode5 Measurement parameter6 Display for alarm signal, Bluetooth®, charge level7 Maximum measured value8 Current measured value7 Using the productThe Main menu can be accessed via the icon at top left. To exit the main menu, select a menu or right-click on the guided menus. The last screen displayed is shown.7.1.1 Implementing settingsSelecting, opening and setting functions1 Press the relevant key to select the functions.Secondary assignment (long press)All keys with a white corner have a secondary assignment, which can be selected by pressing and holding the key (1 sec).Adjustable functionsEnsure correct settings: all settings are transferred immediately. There is no Cancel function.7 Using the product Measurement parameterDisplay illumination / sensor LED(long press)Alarm soundUnit (long press)7Using the product Max. zeroing (long press) Zeroing7 Using the product7.2 Carrying out a function test1 Apply low-concentration gas to the sensor (max. 10 sec).↓If the sensor does not respond (no alarm), the instrument is defective and must no longer be used. The instrument must be taken to theservice centre for repair.Due to the selectivity of the sensor, gas equivalents are not suitable forchecking the function and especially not for calibrating the sensor.7.3 Carrying out gas detectionHave the instrument serviced annually by the manufacturer.Testing natural gas lines or hydrogen lines:Methane (main component of natural gas) or hydrogen are lighter thanair, detection should be carried out above the pipe / suspected leak.Testing propane and butane gas lines: Propane and butane are heavierthan air, detection should be carried out below the pipe / suspectedleak, starting from the bottom and working upwards.Selecting the gas to be detected1 Select the gas types via the GAS key or the testo Smart App using the3-point menu in the top right corner of the output field↓After switching on the instrument, the process of cycling through starts with methane (CH4).Automatic identification of common gas typesThe gas is automatically detected and indicated by a flashing gas icon on the display if a gas concentration currently applied to the sensor has characteristics of a different gas type than is currently selected.For technical reasons, this is subject to uncertainty and is intended as a support for users, and must therefore always be checked by the user.7Using the productSelecting the mode1 Press the MODE key to switch between modes.MODE 1 is suitable for measuring the general gas concentration in indoor areas.↓The gas concentration is indicated bythe increasing bar display.MODE 2 is suitable for locating a leak. In this mode, rising or falling concentration values are output.↓At the beginning, two bar segmentsare displayed in the middle.At the same time, the sensor LEDflashes in a colour corresponding tothe concentration value and an audiosignal is emitted at the samefrequency.↓As the concentration increases, adeflection to the right is displayed.The frequency of the flashing/audiosignal increases.As the concentration decreases, adeflection to the left is displayed. Thefrequency of the flashing/audio signaldecreases.7 Using the product↓If the concentration remains unchanged, the deflection moves back to the centre. The deflection is reset manually using the [--> 0 <--] key Carrying out the measurement1 Move the sensor head as close as possible and at low speed (approx.< 2 cm per second) over the components that are to be checked forleaks.The surface of the sensor must not be covered.↓•Concentration < 100 ppm: The sensor LED and the displayillumination light up green. In addition, the bar display increases.•Concentration > 100 and < 999 ppm: The sensor LED and the display illumination light up yellow. In addition, the bar displayincreases.•Concentration > 999 ppm: The unit changes to VOL% and the bar display increases.•Concentration > 9999 ppm / > 0.99 VOL%: The sensor LED and the display light up red (alarm threshold).↓When the lower explosive limit is reached, ">LEL" is displayed. Higher values are not displayed.To locate the leak, it is advisable, in the case of these larger leaks, toswitch to MODE 2 in order to receive feedback via audio and flashingsignals.↓If the warning threshold (100 ppm) is exceeded, the sensor LED and display illumination light up yellow. If the acoustic alarm is enabled, anadditional warning sound is emitted when the warning threshold isexceeded, the frequency of which increases as the concentrationincreases, and changes to a continuous tone when the second alarmthreshold (10,000 ppm) is exceeded.Changing unitsBy default, the display shows ppm (concentration in parts per million). From a concentration of >999 ppm, the display changes to vol% (1000 ppm=0.1 vol%). Higher concentrations in ppm are also displayed in the app.In addition, %LEL (the percentage of the lower explosive limit that has been reached) can be selected.1 Press the unit key to change the unit.Carrying out manual zeroingThe zero point can only be set manually if the currently detected gas concentration is below the max. 250 ppm (max. 250 ppm can be suppressed). For example:•150 ppm (≤ 250 ppm): are completely suppressed (display: 0 ppm)7Using the product•1000 ppm (> 250 ppm): 250 ppm are suppressed (display: 750 ppm)Gas concentrations present at the time of zeroing are suppressed byzeroing. As a result, the displayed reading no longer corresponds to thereal gas concentration.✓ The instrument is in measurement view.1 Briefly press [--> 0 <--].↓The zero point for the current reading is reset or the currentsuppression is cancelled.↓On instruments with a display, the suppression of the reading is symbolized by an arrow pointing downwards on the display.The maximum reading can be zeroed using [max --> 0 <--].After the measurement1 Ventilate the sensor thoroughly after each use. To do this, place theinstrument in fresh air for approx. 2 minutes before using it again.8 Maintaining the product8 Maintaining the product8.1 Charging the rechargeable batteryDANGER- Do not charge the rechargeable battery in potentially explosive atmospheres!Only charge the battery using the original Testo mains unit supplied. The instrument indicates that the battery needs to be charged via a flashing battery symbol.1 Connect the instrument to the mains via the mains unit. To do this,insert the plug of the mains unit into the charging socket on theunderside of the instrument.When the mains unit is plugged in during operation, the instrumentswitches off due to ATEX regulations.The instrument can become very warm during charging and should notbe held in your hand.8.2 Cleaning the instrument1 If the housing of the instrument is dirty, clean it with a damp cloth.Do not use any aggressive cleaning agents or solvents! Mild householdcleaning agents and soap suds may be used.Storage & transportationTo prevent contamination of the sensor, please do not store or transport the instrument in an environment where any tobacco smoke, foul air, oils, greases, silicones, evaporating liquids or gases are present. Any sensor that is contaminated as a result of storage or transportation must be cleaned before use, see Cleaning the sensor.Regular inspectionTesto recommends having the gas leak detector inspected by an authorized service centre every year.8.3 Cleaning the sensorTobacco smoke, dirty air, oils, greases, silicones and evaporating liquids or gases can leave deposits on the sensor surface. Possible consequences are8Maintaining the productreduced sensitivity, distorted displays of gas concentration or display of a background concentration. Clean the sensor if necessary1 Switch on the instrument, allow it to initialize and then switch it off.Repeat this procedure several times.2 If it is dirty, clean the sensor head with a soft, dry cloth.Switching on regularlyIf the instrument is used infrequently, deposits may build up on the sensor. Switching the instrument on prevents these deposits from building up on the sensor. Testo recommends switching the instrument on regularly to avoid deposits building up on the sensor.Changing the sensor headThe instrument has a permanently installed sensor head that can only be replaced by Testo Customer Service.9 Technical data for testo 316-1-EX 9 Technical data for testo 316-1-EX2110Tips and assistance10 Tips and assistance10.1 Questions and answers10.2 Error codesThe error code is shown on the display.10.2.1 Hard Reset1 If you encounter any problems with the firmware, press and hold theON/OFF key for a long time (4 sec.) to perform a reset.10.3 Accessories and spare parts11 SupportYou can find up-to-date information on products, downloads and links to contact addresses for support queries on the Testo website at: .If you have any questions please contact your local dealer or the Testo Customer Service. You can find contact details on the back of this document or online at /service-contact.22Testo SE & Co. KGaACelsiusstraße 279822 Titisee-NeustadtGermanyTelefon: +49 7653 681-0E-Mail:*************Internet: 0970 3263 en 05 - 04.2023。
艾特顿 FI3125L 型号的完整外壳电路保护器说明书
Eaton FI3125LEaton Series C complete molded case circuit breaker, F-frame, FI, Complete breaker, Thermal-magnetic trip type, Three-pole, 125A, 480 Vac, 14 kAIC at 480 Vac, Line and load, InternationalGeneral specificationsEaton Series C complete molded case circuit breakerFI3125L 7866792852067.5 in 4.9 in5 in 4.6 lb Eaton Selling Policy 25-000, one (1) year from the date of installation of the Product or eighteen (18) months from the date of shipment of the Product, whichever occurs first.IEC 947Product NameCatalog Number UPCProduct Length/Depth Product Height Product Width Product Weight WarrantyCertificationsEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respective owners./socialmedia14 kAIC at 480 Vac FFI InternationalComplete breaker Line and load 480 Vac 125 A Thermal-magnetic Three-poleApplication of Multi-Wire Terminals for Molded Case Circuit Breakers UL listed 100%-rated molded case circuit breakers Application of Tap Rules to Molded Case Breaker Terminals StrandAble terminals product aidPlug-in adapters for molded case circuit breakers product aid Motor protection circuit breakers product aidPower metering and monitoring with Modbus RTU product aid Current limiting Series C molded case circuit breakers product aid Multi-wire lugs product aidCircuit breaker motor operators product aid Breaker service centers Molded case circuit breakers catalog Installation Instructions for Gi, Fi, Ji, Ki, Li, Molded Case Circuit Breakers Universal Line Circuit Breakers Explained Eaton Specification Sheet - FI3125L Series C F-Frame molded case circuit breakersSeries C G-Frame molded case circuit breakers time current curves MOEM MCCB product selection guideSeries C J-Frame molded case circuit breakers time current curvesInterrupt rating Frame Circuit breaker type Class Circuit breaker frame type Terminals Voltage rating Amperage Rating Trip TypeNumber of poles Application notesBrochuresCatalogsInstallation instructionsMultimediaSpecifications and datasheets。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
EVERLIGHT ELECTRONICS CO.,LTD.Technical Data Sheet0.36" Triple Digit DisplaysELT-316SURWA/S530-A3█ Features :●Industrial standard size. ●Low power consumption.●Categorized for luminous intensity.●Pb free●The product itself will remain within RoHS compliant version█ Descriptions :●The ELT-316 series is a large 9.2 mm (0.36")high seven segment display designed for viewing distances up to 7 meters.●These displays provide excellent reliability in bright ambient light. ●These devices are made with white segments and gray surface.█ Applications :●Audio equipment ●Instrument panels ●Digital read out displayMaterialAlGaInPT02278 91560333EVERLIGHT ELECTRONICS CO.,LTD.http : // Rev. : 2Page: 1 of 6Device Number :CDDT-316-023Prepared date:2005/8/9Prepared by: YanLi ZhongELT-316SURWA/S530-A3PART NO.Emitted Color Hyper RedChipNotes: 1.All dimensions are in millimeters , tolerance is 0.25mm unless otherwise noted.2.Above specification may be changed without notice.Supplier will reserve authority on material change for above specification.EVERLIGHT ELECTRONICS CO.,LTD.http : // Rev. : 2Page: 2 of 6 Device Number :CDDT-316-023Prepared date:2005/8/9Prepared by: YanLi ZhongEVERLIGHT ELECTRONICS CO.,LTD.Technical Data Sheet0.36" Triple Digit DisplaysELT-316SURWA/S530-A3█Absolute maximum ratings at Ta = 25℃：Parameter Symbol Rating Unit Reverse Voltage VR 5V Forward Current IF 25mA Operating Temperature Topr -40 to +85℃Storage Temperature Tstg -40 to +100℃Soldering Temperature *Tsol 260 ± 5℃Electrostatic Discharge ESD 2000V Power DissipationPd60mWNote: *Soldering time ≦ 5 seconds.█Electronic optical characteristics :ParameterSymbolMin.Typ.Max.Unit Condition ---- 2.5----mcdIF=2mALuminous 5.611.0----mcdIF=10mA----0.8----mcdIF=2mA2.03.5----mcd IF=10mA Peak Wavelength λp ----632----nm IF=20mA Dominant Wavelength λd ----624----nm IF=20mA △λ----20----nm IF=20mA Forward Voltage VF ---- 2.0 2.4V IF=20mA Reverse CurrentIR--------100μAVR=5VEVERLIGHT ELECTRONICS CO.,LTD. http : // Rev. : 2Page: 3 of 6Device Number :CDDT-316-023Prepared date:2005/8/9Prepared by: YanLi ZhongIvSpectrum RadiationBandwidth IntensityPer segmentPer decimal pointEVERLIGHT ELECTRONICS CO.,LTD.Technical Data Sheet0.36" Triple Digit DisplaysELT-316SURWA/S530-A3█ Typical Electro-Optical Characteristic Curves:EVERLIGHT ELECTRONICS CO.,LTD.http : // Rev. : 2Page: 4 of 6 Device Number :CDDT-316-023Prepared date:2005/8/9Prepared by: YanLi ZhongTechnical Data Sheet0.36" Triple Digit DisplaysELT-316SURWA/S530-A3█ Reliability test items and conditions:The reliability of products shall be satisfied with items listed below. Confidence level：97% LTPD：3%NOItemTest ConditionsTest Hours/Cycle Sample SizeFailure Judgment CriteriaAc/Re1Solder Heat TEMP : 260℃ ± 5 ℃ 5 SEC76 PCS 0/1H : +85℃ 30min 2Temperature Cycle ∫ 5 min 50 CYCLE 76 PCS 0/1L : -55℃ 30min H : +100℃ 5min 3Thermal Shock ∫ 10 sec 50 CYCLE 76 PCS0/1L : -10℃ 5min 4High Temperature Storage TEMP : 100℃1000 HRS 76 PCS0/15Low Temperature Storage TEMP : -55℃1000 HRS 76 PCS 0/16DC Operating Life IF = 10 mA 1000 HRS 76 PCS 0/17High Temperature / HighHumidity85℃/85% RH 1000 HRS 76 PCS 0/1Note：Ivt：The test Iv value of the chip before the reliablility testIv：The test value of the chip that has completed the reliablility test U：Upper Specification Limit L： Lower Specification Limithttp : // Rev. : 2Page: 5 of 6Device Number :CDDT-316-023Prepared date:2005/8/9Prepared by: YanLi ZhongIv≦Ivt*0.5or Vf≧U or Vf≦LEVERLIGHT ELECTRONICS CO.,LTD.Technical Data Sheet0.36" Triple Digit DisplaysELT-316SURWA/S530-A3█ Packing Quantity Specification1.22PCS/tube, 56 tubes/box1. Above specification may be changed without notice. EVERLIGHT will reserve authority onmaterial change for above specification.2. When using this product, please observe the absolute maximum ratings and the instructionsfor using outlined in these specification sheets. EVERLIGHT assumes no responsibility forany damage resulting from use of the product which does not comply with the absolutemaximum ratings and the instructions included in these specification sheets.3. These specification sheets include materials protected under copyright of EVERLIGHT corporation.Please don＇t reproduce or cause anyone to reproduce them without EVERLIGHT＇sconsent.EVERLIGHT ELECTRONICS CO.,LTD.http : // Rev. : 2 Page: 6 of 6 Device Number :CDDT-316-023Prepared date:2005/8/9Prepared by: YanLi Zhong。