表SHT 3903-A.2E Supervision Work Explanation Record
艾茨顿199034产品说明说明书
Eaton 199034Eaton Moeller® series Rapid Link - Speed controllers, 8.5 A, 4 kW, Sensor input 4, Actuator output 2, 230/277 V AC, PROFINET, HAN Q4/2, with braking resistance, with fanGeneral specificationsEaton Moeller® series Rapid Link Speed controller199034195 mm270 mm 220 mm 3.65 kgUL 61800-5-1 IEC/EN 61800-5-1 UL approval RoHS CERASP5-8422PNT-4120101S1Product NameCatalog NumberProduct Length/Depth Product Height Product Width Product Weight Certifications Catalog Notes Model Code3 fixed speeds and 1 potentiometer speedcan be switched over from U/f to (vector) speed control Connection of supply voltage via adapter cable on round or flexible busbar junction480 VIs the panel builder's responsibility. The specifications for the switchgear must be observed.400 V AC, 3-phase480 V AC, 3-phaseMeets the product standard's requirements.4 kW500 VMeets the product standard's requirements.-40 °C380 VThermo-click with safe isolationBraking resistance2 Actuator outputsIGBT inverterKey switch position AUTOPC connectionKey switch position HANDSelector switch (Positions: REV - OFF - FWD)FanKey switch position OFF/RESETPTC thermistor monitoringControl unitInternal DC linkBreaking resistanceTwo sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operation0 Hz Generation change from RA-SP to RASP 4.0Generation change RAMO4 to RAMO5Generation change from RA-MO to RAMO 4.0Configuration to Rockwell PLC for Rapid LinkGeneration Change RA-SP to RASP5Generation Change RASP4 to RASP5Rapid Link 5 - brochureDA-SW-USB Driver DX-COM-STICK3-KITDA-SW-USB Driver PC Cable DX-CBL-PC-1M5DA-SW-Driver DX-CBL-PC-3M0DA-SW-drivesConnect - installation helpDA-SW-drivesConnect - InstallationshilfeDA-SW-drivesConnectMaterial handling applications - airports, warehouses and intra-logistics ETN.RASP5-8422PNT-4120101S1.edzIL034093ZUramo5_v36.dwgrasp5_v36.stpDA-DC-00003964.pdfDA-DC-00004184.pdfDA-DC-00004514.pdfDA-DC-00004508.pdfeaton-bus-adapter-rapidlink-speed-controller-dimensions-002.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-003.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions.epseaton-bus-adapter-rapidlink-speed-controller-dimensions-004.epsMains voltage - max10.11 Short-circuit ratingRated operational voltage10.4 Clearances and creepage distancesOutput at quadratic load at rated output voltage - max Output voltage - max10.2.3.1 Verification of thermal stability of enclosures Ambient storage temperature - minMains voltage - minFitted with:Output frequency - min Applikasjonsmerknader BrosjyrereCAD model Installeringsinstruksjoner mCAD model SertifiseringsrapporterTegningerStarting current - max200 %, IH, max. starting current (High Overload), For 2 seconds every 20 seconds, Power sectionRated conditional short-circuit current (Iq)10 kAAmbient operating temperature - max40 °CCommunication interfacePROFINET, optionalAssigned motor power at 115/120 V, 60 Hz, 1-phase5 HPOutput frequency - max500 HzSwitching frequency8 kHz, 4 - 32 kHz adjustable, fPWM, Power section, Main circuitFeaturesParameterization: drivesConnect mobile (App) Parameterization: FieldbusInternal and on heat sink, temperature-controlled Fan Parameterization: drivesConnectParameterization: KeypadAmbient operating temperature - min-10 °CBraking current≤ 0.6 A (max. 6 A for 120 ms), Actuator for external motor brakeNumber of HW-interfaces (serial TTY)10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.Nominal output current I2N8.5 A10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.10.3 Degree of protection of assembliesDoes not apply, since the entire switchgear needs to be evaluated.Product categorySpeed controllerRadio interference classC2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.C1: for conducted emissions onlyHeat dissipation capacity Pdiss0 WRated control voltage (Uc)230/277 V AC (external brake 50/60 Hz)24 V DC (-15 %/+20 %, external via AS-Interface® plug)Assigned motor power at 460/480 V, 60 Hz, 3-phase5 HPNumber of HW-interfaces (RS-422)Mains current distortion120 %ProtocolPROFINET IO10.9.2 Power-frequency electric strengthIs the panel builder's responsibility.Overvoltage categoryIIIDegree of protectionIP65NEMA 12Ambient storage temperature - max70 °CRated impulse withstand voltage (Uimp)2000 VConnectionPlug type: HAN Q4/2Overload currentFor 60 s every 600 sAt 40 °CFunctionsFor actuation of motors with mechanical brake3 fixed speeds1 potentiometer speedBrake chopper with braking resistance for dynamic braking4-quadrant operation possibleOutput at linear load at rated output voltage - max4 kWMains voltage tolerance380 - 480 V (-10 %/+10 %, at 50/60 Hz)Leakage current at ground IPE - max3.5 mAConverter typeU converter10.2.2 Corrosion resistanceMeets the product standard's requirements.Supply frequency50/60 Hz10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard's requirements.10.2.7 InscriptionsMeets the product standard's requirements.Shock resistance15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms, Half-sinusoidal shock 11 ms, 1000 shocks per shaftApplication in domestic and commercial area permittedYesNumber of inputs (analog)Number of phases (output)310.12 Electromagnetic compatibilityIs the panel builder's responsibility. The specifications for the switchgear must be observed.10.2.5 LiftingDoes not apply, since the entire switchgear needs to be evaluated.Number of HW-interfaces (RS-485)1Number of HW-interfaces (industrial ethernet)Efficiency98 % (η)System configuration typePhase-earthed AC supply systems are not permitted.AC voltageCenter-point earthed star network (TN-S network)10.8 Connections for external conductorsIs the panel builder's responsibility.Switch-on threshold for the braking transistor765 VDCProtectionFinger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)Braking voltage230/277 V AC -15 % / +10 %, Actuator for external motor brakeApplication in industrial area permittedYesClimatic proofingIn accordance with IEC/EN 50178< 95 %, no condensation10.9.3 Impulse withstand voltageIs the panel builder's responsibility.Overload current IL at 150% overload12.7 AInput current ILN at 150% overload7.8 ANumber of HW-interfaces (RS-232)Number of inputs (digital)4Current limitationAdjustable, motor, main circuit0.8 - 8.5 A, motor, main circuitCable lengthC3 ≤ 25 m, maximum motor cable lengthC1 ≤ 1 m, maximum motor cable lengthC2 ≤ 5 m, maximum motor cable length10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to beevaluated.Mounting positionVerticalMains switch-on frequencyMaximum of one time every 60 seconds10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.9.4 Testing of enclosures made of insulating materialIs the panel builder's responsibility.Heat dissipation per pole, current-dependent Pvid0 WElectromagnetic compatibility1st and 2nd environments (according to EN 61800-3)Resolution0.1 Hz (Frequency resolution, setpoint value)Assigned motor power at 460/480 V, 60 Hz5 HPRelative symmetric net voltage tolerance10 %Rated operational current (Ie)8.5 A at 150% overload (at an operating frequency of 8 kHz and an ambient air temperature of +40 °C)Number of outputs (analog)Rated operational power at 380/400 V, 50 Hz, 3-phase4 kWNumber of HW-interfaces (USB)Operating modeSensorless vector control (SLV)PM and LSPM motorsSynchronous reluctance motorsBLDC motorsU/f controlRated frequency - min45 HzDelay time< 10 ms, On-delay< 10 ms, Off-delayNumber of outputs (digital)2Power consumption95 W10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effectsMeets the product standard's requirements.Number of HW-interfaces (other)Rated frequency - max66 HzVibrationResistance: According to IEC/EN 60068-2-6Resistance: 6 Hz, Amplitude 0.15 mmResistance: 10 - 150 Hz, Oscillation frequency Resistance: 57 Hz, Amplitude transition frequency on accelerationShort-circuit protection (external output circuits)Type 1 coordination via the power bus' feeder unit, Main circuit10.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.Braking torque≤ 30 % (I/Ie)Adjustable to 100 % (I/Ie), DC - Main circuitRelative symmetric net frequency tolerance10 %10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Number of HW-interfaces (parallel)Assigned motor power at 230/240 V, 60 Hz, 1-phase5 HPInterfacesNumber of slave addresses: 31 (AS-Interface®)Eaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Med enerett.Eaton is a registered trademark.All other trademarks are property of their respectiveowners./socialmediaMax. total power consumption from AS-Interface® power supply unit (30 V): 250 mASpecification: S-7.4 (AS-Interface®)351.6 W at 25% current and 0% speed 53.8 W at 25% current and 50% speed 60.9 W at 50% current and 0% speed 64 W at 50% current and 90% speed 65.4 W at 50% current and 50% speed 85.1 W at 100% current and 0% speed 94 W at 100% current and 50% speed 95.3 W at 100% current and 90% speed 2Max. 2000 mAbove 1000 m with 1 % performance reduction per 100 mNumber of phases (input)Heat dissipation at current/speed Number of interfaces (PROFINET)Altitude。
阿美泰克2014样本
page 02
板式换热器特点
page 03
板式换热器系列
Plate heat exchanger
板式换热器系列
Plate heat exchanger
板式换热器特点
先进的板型设计
上海阿美泰克公司引进了AMETECH的先进设计、制造生产工艺，以用户使用的 可靠性与最佳运行性能为核心，最大限度提高换热效率，降低能耗损失。
板式换热器系列
Plate heat exchanger
板式换热器系列
Plate heat exchanger
等截面板式换热器型号及意义 A M 20–MPM /6000 - 100
换热量（kw）- 换热面积（m2）
压力等级
PL:1.0 MPa PM:1.6MPa PG:1.6~2.5MPa
波纹深度
M:深波纹 B:浅波纹
管壳式换热器………………………………………………………………………………………………………………………25
容积式换热器………………………………………………………………………………………………………………………27
半即热式换热器……………………………………………………………………………………………………………………29
板式换热器的结构原理板式换热器材质技术规范和质量保证体系美国asme日本jis标准美国3a卫生标准德国tuv标准中国nbt47004iso90011400118000板片材质材料型号适用场合耐酸耐热不锈钢工业纯钛哈氏合金镍基合金超级铁素体工业黄铜sus304sus316lta1ta2hastelloyc276c2000n6c4000cr18mo2000cr26mo1h68河水盐水海水和有氯离子腐蚀场合浓硫酸盐酸磷酸及强氧化性介质等场合高温高浓度苛性钠和有氯离子腐蚀场合有机溶剂和有晶间腐蚀氯离子腐蚀场合海水低温冷冻场合净水河川水食用油矿物油酸碱介质和腐蚀较严重的场合不适宜有氯离子的场合垫片材质使用温度适用介质场合丁腈橡胶nbr氯丁橡胶neoprene三元乙丙橡胶epdm氟橡胶vitonfpm硅橡胶siliconerubber水氟里昂等一般弱酸弱碱腐蚀的场合高温热水和蒸汽
SHT3543附录A 通用表填表格及说明
年月日 h
二次灌浆指的是设备、钢结构等的底座与基础（或钢结构柱底板与基础）之间的灌浆。“灌浆 料种类”栏应填写型号（标号）与名称，如 C30 细石混凝土、CGM 灌浆料等。“配合比”栏填写水、 水泥、砂子、石子或水与专用灌浆料的配合比。
试块留置：
备注：
施工班组长：
日期：
年
专业工程师：
月 日 日期：
年
注：附特殊工种作业人员证书的复印件。
编制人： 日期：
审核人： 年 月 日 日期：
年月日
13
SH/T 3543－2007
14
SH/T3543-G109
序号
名称
周期检定计量器具清单
工程名称：
编号
规格型号
精度等级 检定/校准证书编号 检定/校准日期 有效期 备注
用于本项目工程施工检测的计量器具，需按国家检定规程规定的周期进行检定， 具备有效的检定合格证。
施工过程技术文件总目录
序号 卷号 册号
1
1/8 1
2
1/8 2
3
1/8 3
4
1/8 4
5
1/8 5
资料名称 综合卷—施工组织设计报审资料册 综合卷—项目组织机构、管理人员报审 综合卷—项目管理制度册 综合卷—项目例会纪要册 综合卷—项目质量技术专题会纪要册
2/8 1
土建工程卷综合册
3/8 1
设备安装工程卷综合册
编制人： 日期：
审核人： 年 月 日 日期：
年月日
SH/T3543-G110
施工图核查记录
SH/T 3543－2007 工程名称： 单元名称：
设计单位 主持人 施工图号
专业 核查时间
年月日
Omega Silicone Rubber Drum Heaters SHDH, SSDH 系列及
CONNECTING HEATER TO AC POWER
1. The drum heater is designed to work at a specific voltage. Refer to the lead wire label or stamp located on the heater for rated voltage and wattage.
Please read this guide prior to contacting OMEGA. This guide is designed to answer the most commonly asked questions. If you are unable to identify the problem or need additional assistance, please contact us at 1-800-USA-HEAT.
Failure to operate the drum heater at its rated voltage could cause damage to the heater, surface being heated, or contents of drum.
All electrical connections must be made by qualified personnel and in accordance with all local codes and regulations.
7
prior written consent of OMEGA ENGINEERING, INC
产品认证申请表
□报废SCraP□寄回RetUm□客户领取（保留3周〉Pickedupbyc1ient
如未提供样品处理意见，我们将统一报废处理。Ifnoindication,testsamp1ewi11bescrappedaftertesting
口电气原理图Schematic□印刷电路板走线图PCB1ayOUt□说明书USermanUaI□物料清单BOM
□功能方块图B1ockDiagram□规格说明Specification口标签及位置图1abe1□定频软件TUneUPProCedUre
请选择服务类型Ticktherequiredservice：
产品认证申Leabharlann 表申请商(APP1iCant):
中文名称：英文名称：
中文地址：
英文地址：
制造商(Factory):
区!同申请商□同生产厂□其他
生产厂(ProdUCtionp1ant)
中文名称:
英文名称：
中文地址：英文地址：
联系人ComtactPerson:
电话Te1ephone:
Fax传真：
E-Mai1电邮:
产品名称（E.U∙T）:
中文信息：英文信息：
商标(TradeMark):
如需要体现在证书/报告请填写,此处不填则默认忽略.
额定参数（Rating）:
额定输入电压（V）额定输入电流（A）额定输出电压（V）额定输出电流（A）
额定输出功率（W）频率（Hz）其他参数
型号（M/N）:
系列型号：主测型号：
电磁兼容
客户签名（盖章）：
业务经理确认：
SHT3903-. 监理规范表格(中文版)
附录A 之邯郸勺丸创作（规范性附录）监理单位用表------SH/T 3903－A.1 总监理工程师任命书------SH/T 3903－A.2 监理交底记录------SH/T 3903－A.3 监理工作联系单------SH/T 3903－A.4 监理通知单------SH/T 3903－A.5 旁站记录------SH/T 3903－A.6 平行检验记录------SH/T 3903－A.7 工程施工暂停令------SH/T 3903－A.8 工程施工复工令------SH/T 3903－A.9 工程款/工程竣工结算款支付证书------SH/T 3903－A.10 监理陈说------SH/T 3903－A.11 费用索赔审批表------SH/T 3903－A.12 工程临时延期审批表------SH/T 3903－A.13 工程最终延期审批表------SH/T 3903－A.14 监理日志监理月报附录B（规范性附录）承包单位用表施工组织设计/施工技术方案报审表工程施工开工报审表------SH/T 3903－B.3 分包单位资格报审表------SH/T 3903－B.4 施工丈量功效报验申请表工程资料/构配件/设备报审表------SH/T 3903－B.6 监理通知回复单------SH/T 3903－B.7 单机试车申请表------SH/T 3903－B.8 隐蔽工程/检验批/分项工程报验申请表------SH/T 3903－B.9 分部工程报验申请表------SH/T 3903－B.10 工程施工复工报审表------SH/T 3903－B.11 单位工程预验收报审表工程款/工程竣工结算款支付申请表费用索赔申请表------SH/T 3903－B.15 索赔意向通知书------SH/T 3903－B.16 工程临时/最终延期申请表。
表SHT 3903-B.5 工程材料 构配件 设备报审表
工程材料/东炼化一体化项目常减压装置
编号：191111-A10100-IRB17-CC-LPECC11-2007
致（监理单位）
我方于年月日进场的工程□材料/□构配件/□设备数量如下（见附件）。现将质量证明文件及自检结果报上，拟用于下述部位：
，
请予以审核。
附件：
1数量清单；
2质量证明文件；
3自检结果。
专业工程师：
承包单位（章）日 期：
审查意见：
经检查上述工程□材料/□构配件/□设备，□符合/□不符合设计文件和规范的要求，□准许/
□不准许进场，□同意/□不同意使用于拟定部位。
专业监理工程师：
项目监理机构（章）日 期
（学习的目的是增长知识，提高能力，相信一分耕耘一分收获，努力就一定可以获得应有的回报）
REF3030AIDBZR
SHENZHEN XUNFENG TECHNOLOG LTD. HTTP:/ 电话:13751074754 传真:0755-83259733
深圳市福田红荔路上步工业区上航大厦 302 室
规 格 承 认 书
SPECIFICATON FOR APPROVAL 承认书编号: SZ-XF-0105 客 户 CUSTOMER 深圳科士达科技股份有限公司
q MicroSIZE PACKAGE: SOT23-3 q LOW DROPOUT: 1mV q HIGH OUTPUT CURRENT: 25mA q HIGH ACCURACY: 0.2% q LOW IQ: 50µA max q EXCELLENT SPECIFIED DRIFT PERFORMANCE: 50ppm/°C (max) from 0°C to +70°C 75ppm/°C (max) from –40°C to +125°C
PRODUCT REF3012
PACKAGE-LEAD SO T23-3
"
REF3020
"
SOT23-3
"
DBZ
"
–40°C to +125°C
"
R30B
"
REF3025
"
SOT23-3
"
DBZ
"
–40°C to +125°C
"
R30C
"
REF3030
"
SOT23-3
"
DBZ
"
–40°C to +125°C
ELECTROSTATIC DISCHARGE SENSITIVITY
项目验收通用表格模版
项目验收通用表格模版1.1承建单位通用表格 (3)☐表A-1 方案/打算报审表 (3)☐表A-2 总体进度打算报审表 (4)☐表A-3 分包单位资格审查申请表 (5)☐表A-4 开工申请 (6)☐表A-5 工程环境报验单 (7)☐表A-6 工程材料／设备／配件报审表 (8)☐表A-7 工程时期性测试验收（初验、终验）报审表 (9)☐表A-8 复工申请 (10)☐表A-9 质量问题报告单 (11)☐表A-10 时期支付汇总表 (12)☐表A-11 工程款支付申请表 (13)☐表A-12 工程变更费用申请表 (14)☐表A-13 承建单位申请表（通用） (15)☐表A-14 设备抽样试验的方法 (16)☐表A-15 设备拷机测试报告 (17)☐表A-16 磁盘或可装载运算机软件的媒介测试报告 (18)☐表A-17 工程变更单 (19)☐表A-18 时期施工申请表 (21)☐表A-19 分项/分部工程验收报验表 (22)☐表A-20 工程延期申请表 (23)☐表A-21 总/监理工程师通知回复单 (24)☐表A-22 设备附件明细单 (25)☐表A-23 设备开箱检验报告 (26)☐表A-24 合同设备配置及附件核查表 (27)☐表A-25 隐藏工程验收记录表 (28)☐表A-26 项目进展定期报告 (29)☐表A-27 （软件）安装报验申请表 (30)☐表A-28 设备（软件）安装记录 (31)☐表A-29 设备（软件）调试报验申请表 (32)☐表A-30 设备（软件）调试记录 (33)☐表A-31 系统集成记录 (34)☐表A-32 系统联调报审表 (35)☐表A-33 系统联调记录 (36)1.1监理单位通用表格 (37)☐表B-1 监理通知单 (37)☐表B-2 不合格工程项目通知 (38)☐表B-3 分项工程检验认可书 (39)☐表B-4 项目进度打算审批表 (40)☐表B-5 延长工期审批表 (41)☐表B-6 索赔审批表 (42)☐表B-7 工程竣工移交证书 (43)☐表B-8 工程部分暂停指令 (44)☐表B-9 复工指令 (45)☐表B-10 工程款支付证书 (46)☐表B-11 开工令 (47)☐表B-12 监理服务款支付申请表 (48)☐表B-13 总/监理工程师巡检记录 (49)☐表B-14 变更、洽谈记录 (50)☐表B-15 工程情形说明表 (51)☐表B-16 合同审核表 (52)☐表B-17 设备附件明细单 (53)☐表B-18 设备开箱检验表 (54)☐表B-19 批复单 (56)☐表B-20 客户意见反馈表 (57)☐表B-21 集中培训调查问卷 (58)☐表B-22 集中培训成效评估意见表 (60)☐表B-23 工程验收评估意见表 (61)☐表B-24 监理抽检记录 (62)☐表B-28监理工作联络名单 (64)☐表B-29监理工作备忘录 (65)☐表B-30质量处理过程记录 (66)☐表B-31试运行记录进行检查 (67)1.1承建单位通用表格表A-1 方案/打算报审表XXXXX方案/打算报审表说明：1、本表用于承建单位报批项目设计、实施等技术、组织方案。
A2(施工组织设计方案报审)
施工组织设计/施工方案。
Construction Organization Design/Construction Plan。
承包单位（章）
Contractor（Chop）
项目经理
Project Manager
日期
Date
专业监理工程师审查意见Review comments from discipline supervision engineer：SH/T 3 Nhomakorabea03-A.2
施工组织设计（方案）报审表
Construction Organization Design Approval Request
工程名称Works Title：
编号Item No：
致山东省正大建设监理有限公司昌邑石化项目监理部（监理单位）
To（CS/CMC）
我方已根据施工承包合同的有关规定完成了工程施工组织设计（方案）的编制，并经我单位技术负责人审查批准，请予以审查。
专业监理工程师
Discipline Supervision Engineer
日期
Date
总监理工程师审核意见Review comments from chief supervision engineer：
项目监理机构
CS/CMC
总监理工程师
Chief Supervision Engineer
日期
Date
According to the related regulations of the construction contract, we have completed the preparation of the construction organization design, and it has been reviewed and approved by the technical responsible people of our company, please review it.
sh3903附录A 通用表格式
日期： 月 日 年 月 日
日期： 年 月 日
SH/T 3503－2007 工程名称： SH/T3503-J102
交工技术文件总目录
资 料 名 称 页 数
序 号
卷 号
册 号
编制人： 日 期： 年 月
审核人： 日 日 期： 年 月 日
13
usb"/;Svpy,dlVIi.59Bkg-Rj()qw6A'7CP:1D ofthecnram 痛 闷 沉 程 又 短 苦 生 感 帯 可 同 相 尽 丌 度 觇 少 多 戒 么 什 来 带 会 耂 怃 人 丧 每 许 也 是 但 亜 死 知 预 法 无 我 调 精 间 时 段 过 经 获 收 耘 耕 分 一 。 答 解 心 耐 都 题 问 的 上 量 测 到 遇 ， 式 公 算 计 、 器 仪 用 使 们 他 教 地 把 手
年
月
日
日期：
年
月
日 日期：
年
月Hale Waihona Puke 日SH/T 3503－2007 工程名称： SH/T3503-J105B
7 月 28 日 计划竣工日期
从 17 轴处开始沿 17 轴→8 轴→19 轴→21 轴→23 轴→25 轴→27 轴→10 轴→29 轴段的给排水 管线及厂区道路工程等。
开 设计交底已进行；施工安全协调会一开；施工环境危害识别已进行；安全措施已落实；施工方 工 案已审批；安全监护已到位；作业人员上岗证具备；作业人员劳动保护（PPE）具备；质保体系 条 和 HSE 体系已报审； 件 审 查 意 见 质 量 监 督 意 见 建 设 单 位 （公章） 项目经理： （公章） 项目总监：
SH/T 3503－J122－1 SH/T 3503－J122－2 SH/T 3503－J123－1 SH/T 3503－J123－2 SH/T 3503－J124－1 SH/T 3503－J124－2 SH/T 3503－J125－1 SH/T 3503－J125－2 SH/T 3503—J126－1 SH/T 3503—J126－2 SH/T 3503—J127－1 SH/T 3503—J127－2 SH/T 3503—J128 SH/T 3503—J129 SH/T 3503—J130
中英文产品合格证
_技术条件符合：机械安全_机械电气设备GB5226.2-2002。
Technical specification is according to GB5226.2-2002 standard.
本产品符合设计要求，经检验合格，准予出厂。
This product is qualified according to the delivery inspection.
签章(Sign)：__________ห้องสมุดไป่ตู้___________
出厂日期(Manufacture data)：2013-03-01
自重(Dead Weight)：52Kg
_所有热切割按：ISO 9013-332.
All materials are cutting according to ISO 9013-332 standard.
_焊接结构公差按：DIN ENISO 13920-BF.
Tolerance of steel structure welding is according to DIN EN 13920-BF standard.
批注本地保存成功开通会员云端永久保存去开通
上海东普起重机械有限公司
产品合格证
Certificate of Quality
订单编号(P.O.Number)：
名称(Name)：十字吊具(cross beam)
额定载荷(Rated Capacity)：2000 Kg
型号(Type)：KE4702-01
出厂编号(Manufacturing Nr.)：DONP100588(1)
EM330 DS 021120 三相能量表说明书
• Three phase energy meter• Class 1 (kWh) according to EN62053-21• Class B (kWh) according to EN50470-3• Accuracy ±0.5% RDG (current/voltage)• Current measurement via CT• Backlit LCD display (3x 8-digit) with integrated touch key-pad• Energy readout on display: 8 digit • Variable readout on display: 4 digit• Energy measurement: kWh and kvarh (imported/exported); kWh+ by 2 tariffs; kWh per phase• System variables: kW, kvar, kVA, VLL, VLN, PF, Hz, kWdmd, kWdmd peak• Phase variables: kW, kvar, kVA, VLL, VLN, A, PF • Auxiliary power supply • Dimensions: 3-DIN module • Protection degree (front): IP51• Pulse output (optional, by open collector PNP)• RS485 Modbus port (optional)• M-Bus port (optional)• Run hour meter• Neutral current calculation• Digital input (for tariff management)Product descriptionThree-phase energy meter with backlit LCD display with integrated touch keypad. Particularly indicated for active energy metering and for costallocation (CT connection), with dual tariff management availability. It can measure imported and exported energy or be programmed to consideronly the imported one. Housing for DIN-rail mounting, with IP51 front degree protection. The meter is optionally provided with pulse output proportionalto the active energy being measured, RS485 Modbus port or M-Bus port. Available for legal metrology (PF option, only for imported energy).• Easy connection or wrong current direction detection • Certified according to MID Directive (option PF only): see “how to order” below• Compliant with the international accuracy standard IEC/EN62053-21, and the IEC/EN61557-12 performance requirements (active power and active energy).• Other versions available (not certified, option X): see “how to order” on the next pageEnergy Management Energy Meter Type EM330(see Annex V, MI003, of MID). Can be used for fiscal (legal) metrology.Type SelectionRange codeAV5: 400 VLL AC - 5(6)A(CT connection)Power supply H:auxiliary power supply 90 to 260 V ac/dcOutput O1: pulse output S1: RS485 Modbus port M1:M-Bus portSystem 3:3-phase, 3 or 4 wireOption PF:Certified according to MID Directive. Can be used for fiscal (legal) metrology.Measurement A:The power is always integrated (both in case ofpositive imported and negative exported power) and the total energy meter is certified according to MID.B:Only the total positive energy meter is certified according to MID.EM330Not certified according to MID Directive. Cannot be used for fiscal (legal) metrology.Type SelectionRange codeAV5: 400 to 480 VLL ac -5(6)A (CT connection)230 to 277 VLN ac -5(6)A (CT connection)Power supplyH: auxiliary power sup-ply 100 to 240V ac/dcOutputO1:pulse outputS1:RS485 Modbus portM1:M-Bus port System3:3-phase, 3- or 4-wire;2-phase 3-wire,1-phase 2 wireOption X:noneEM330Input specificationsEM330Output specificationsDigital input specificationsInput specifications (cont.)Load conditionsThe wrong connection detection works in case of loads with:- PF>0.766 (<40°) ifinductive or PF>0.996 (<5°) if capacitive- a current at least equal to 10% rated current Energy meteringin every measuringinterval the single phase energies with positive signare summed to increase the total postive energy totalizer (kWh+), while the others increase the total negative totalizer (kWh-). Ex.P L1= +2kW, P L2 = +2kW, P L3 = -3 kW Integration time = 1 hour +kWh = (2+2) x1h = 4 kWh -kWh = 3 x 1h= 3kWhDigital inputsFree of voltage contact FunctionTariff management (switch between t1-t2)Number of inputs 1 Contact measurement voltage 5 V Input impedance 1kohmContact resistance ≤1kohm, close contact≥100kohm, open contact OverloadIn case a voltage iserroneously applied to the digital input, the input is not damaged up to 30 V ac/dc.EM330General specificationsOutput specificationsNote 2: in MID models, the pulse rate is automatically set according to CT x VT ratio:Weight (pulses/kWh) 1 > 700,1 (CT x VT) Weight (pulses/kWh) 1070.1–700 (CT x VT)Weight (pulses/kWh) 100 7.1–70 (CT x VT)Weight (pulses/kWh) 1000 < 7.1 (CT x VT)Pulse ON duration Selectable: 30 ms or 100 ms according to EN62053-31 Output typeOpen collector PNP LoadV ON 1 V dc max. 100mA V OFF 80 V dc max.EM330Accuracy (according to EN50470-3 and EN62053-23)Power supply specificationsAuxiliary power supplyH: 100 to 240 V ac/dcPower consumption≤ 1W, ≤ 8VAInsulation (for 1 minute) between inputs and outputskWh,accuracy (RDG) depending on the currentClass 1 accuracy limits (Active energy)5(6)A Start-up current: 10mA Percentage error limits for class index B+1.5%+1%0%-1%-1.5%PF=10.25A(I min )0.5A(I tr )5A(I n )6A(I max )0.5A(I tr )5A(I n )6A(I max )PF=L0.5or C0.8(0,1I ref )(0,1I ref )(0.05I ref )kvarh,accuracy (RDG) depending on the currentClass 2 accuracy limits (Reactive energy)5(6)A Start-up current: 10mAError+2.5%+2%0%-2%-2.5%sin j =10.25A0.5A 5A(In)6A(I max )1A5A(In)6A(I max )sin j =0.5(0.1In)(0.25In)0.5A(0.05In)(0.1In)Measurement accuracy according to IEC/EN61557-12 (MID versions)Active powerPerformance class 1Active energyPerformance class 2EM330Display pagesX= availableEM330Additional available information on the displayEM330EM330Wiring diagrams (cont.)EM330Specification are subject to change without notice EM330 DS 02112011Front panel description1. Display Backlit LCD display with touch key-pad.2. LED LED proportional to kWh reading3. Serial number Area reserved to serial number and MID-relevant data in PF versionsDimensions。
职业健康安全管理体系审核检查表1
职业健康安全管理体系审核通用检查表（适合各部门）注：“检查结果记录”栏：符合○，轻微不符合△，严重不符合×（有不符合时要记录证据，并要求受审核部门当事人签名确认）。
注：“检查结果记录”栏：符合○，轻微不符合△，严重不符合×（有不符合时要记录证据，并要求受审核部门当事人签名确认）。
注：“检查结果记录”栏：符合○，轻微不符合△，严重不符合×（有不符合时要记录证据，并要求受审核部门当事人签名确认）。
注：“检查结果记录”栏：符合○，轻微不符合△，严重不符合×（有不符合时要记录证据，并要求受审核部门当事人签名确认）。
注：“检查结果记录”栏：符合○，轻微不符合△，严重不符合×（有不符合时要记录证据，并要求受审核部门当事人签名确认）。
注：“检查结果记录”栏：符合○，轻微不符合△，严重不符合×（有不符合时要记录证据，并要求受审核部门当事人签名确认）。
注：“检查结果记录”栏：符合○，轻微不符合△，严重不符合×（有不符合时要记录证据，并要求受审核部门当事人签名确认）。
注：“检查结果记录”栏：符合○，轻微不符合△，严重不符合×（有不符合时要记录证据，并要求受审核部门当事人签名确认）。
注：“检查结果记录”栏：符合○，轻微不符合△，严重不符合×（有不符合时要记录证据，并要求受审核部门当事人签名确认）。
注：“检查结果记录”栏：符合○，轻微不符合△，严重不符合×（有不符合时要记录证据，并要求受审核部门当事人签名确认）。
注：“检查结果记录”栏：符合○，轻微不符合△，严重不符合×（有不符合时要记录证据，并要求受审核部门当事人签名确认）。
注：“检查结果记录”栏：符合○，轻微不符合△，严重不符合×（有不符合时要记录证据，并要求受审核部门当事人签名确认）。
注：“检查结果记录”栏：符合○，轻微不符合△，严重不符合×（有不符合时要记录证据，并要求受审核部门当事人签名确认）。
预防安全自动化产品数据册-XPSUAT13A3AP预防模块说明书
T h e i n f o r m a t i o n p r o v i d e d i n t h i s d o c u m e n t a t i o n c o n t a i n s g e n e r a l d e s c r i p t i o n s a n d /o r t e c h n i c a l c h a r a c t e r i s t i c s o f t h e p e r f o r m a n c e o f t h e p r o d u c t s c o n t a i n e d h e r e i n .T h i s d o c u m e n t a t i o n i s n o t i n t e n d e d a s a s u b s t i t u t e f o r a n d i s n o t t o b e u s e d f o r d e t e r m i n i n g s u i t a b i l i t y o r r e l i a b i l i t y o f t h e s e p r o d u c t s f o r s p e c i f i c u s e r a p p l i c a t i o n s .I t i s t h e d u t y o f a n y s u c h u s e r o r i n t e g r a t o r t o p e r f o r m t h e a p p r o p r i a t e a n d c o m p l e t e r i s k a n a l y s i s , e v a l u a t i o n a n d t e s t i n g o f t h e p r o d u c t s w i t h r e s p e c t t o t h e r e l e v a n t s p e c i f i c a p p l i c a t i o n o r u s e t h e r e o f .N e i t h e r S c h n e i d e r E l e c t r i c I n d u s t r i e s S A S n o r a n y o f i t s a f f i l i a t e s o r s u b s i d i a r i e s s h a l l b e r e s p o n s i b l e o r l i a b l e f o r m i s u s e o f t h e i n f o r m a t i o n c o n t a i n e d h e r e i n .Product data sheetCharacteristicsXPSUAT13A3APPreventa module Cat.4 features XPSUAK +delayed outputs 24vac/dc screwMainRange of product Preventa Safety automation Product or component typePreventa safety module Safety module name XPSUATSafety module applicationMonitoring antivalent contactsFor emergency stop, guard and light curtain monitoringMonitoring of pressure-sensitive 4-wire protective devicesFunction of moduleEmergency stop button with 2 NC contacts Guard monitoring with 1 or 2 limit switches Monitoring 2 PNP sensors Magnetic switch monitoring Light curtain monitoring RFID switchMonitoring of electro-sensitive protection equipment (ESPE)Sensing mat/edgesProximity sensor monitoringMonitoring 1 PNP + 1 NPN sensorSafety levelCan reach PL e/category 4 for normally open relay contact ISO 13849-1Can reach SILCL 3 for normally open relay contact IEC 62061Can reach SIL 3 for normally open relay contact IEC 61508Can reach PL c/category 1 for normally closed relay contact ISO 13849-1Can reach SILCL 1 for normally closed relay contact IEC 62061Can reach SIL 1 for normally closed relay contact IEC 61508Safety reliability dataMTTFd > 30 years ISO 13849-1Dcavg >= 99 % ISO 13849-1PFHd = 0.94E-09 for SS0 ISO 13849-1PFHd = 0.95E-09 for SS1 ISO 13849-1HFT = 1 IEC 62061PFHd = 0.94E-09 for SS0 IEC 62061PFHd = 0.95E-09 for SS1 IEC 62061SFF > 99% IEC 62061HFT = 1 IEC 61508-1PFHd = 0.94E-09 for SS0 IEC 61508-1PFHd = 0.95E-09 for SS1 IEC 61508-1SFF > 99% IEC 61508-1Type = B IEC 61508-1Electrical circuit typeNC pair PNP pairAntivalent pair OSSD pairConnections - terminalsRemovable screw terminal block, 0.2...2.5 mm² solid or flexibleRemovable screw terminal block, 0.25...2.5 mm²flexible with ferrule single conductorRemovable screw terminal block, 0.2...1.5 mm² solid or flexible twin conductorRemovable screw terminal block, 2 x 0.25...1 mm²flexible with ferrule without cable end, with bezel Removable screw terminal block, 2 x 0.5...1.5 mm²flexible with ferrule with cable end, with bezel [Us] rated supply voltage24 V AC - 15...10 %24 V DC - 20...20 %ComplementarySynchronisation time between inputs0.5 s2 s4 sType of start Automatic/manual/monitoredPower consumption in W3 W 24 V DCPower consumption in VA 6.5 VA 24 V AC 50/60 HzInput protection type Internal, electronicSafety outputs 1 NC3 NO3 NOSafety inputs21Maximum wire resistance500 OhmTime delay range0...900 sInput compatibility Normally closed circuit ISO 14119XC limit switch ISO 14119Mechanical contact ISO 14119Normally closed circuit ISO 13850Antivalent pair ISO 14119OSSD pair IEC 61496-1-23-wire proximity sensors PNPOutput type Relay output, 250 V ACRelay output, 250 V ACRelay output, 24 V DCRelay output, 24 V DC[Ie] rated operational current5 A AC-13 A AC-155 A DC-13 A DC-133 A AC-11 A AC-153 A DC-11 A DC-13Control outputs 4 pulsed outputInput/output type Semiconductor output Z2, 20 mAPulsed output for diagnostics Z1, 20 mA [Ith] conventional free air thermal current16 AAssociated fuse rating10 A gG NO relay output circuit IEC 60947-1 Minimum output current20 mA relay outputMinimum output voltage24 V relay outputMaximum response time on input open20 ms[Ui] rated insulation voltage250 V 2)EN/IEC 60947-1[Uimp] rated impulse withstand voltage4 kV II EN/IEC 60947-1Local signalling Power ON LED green)Error LED red)Start LED yellow)Safety output instantaneous LED yellow)Safety output delayed LED yellow)Safety input S12 LED yellow)Safety input S22 LED yellow)Safety input S32 LED yellow)Mounting support35 mm symmetrical DIN railMaximum Depth 4.72 in (120 mm)Maximum Height 3.94 in (100 mm)Maximum Width 1.77 in (45 mm)Net Weight0.77 lb(US) (0.350 kg)EnvironmentStandards IEC 60947-5-1IEC 61508-1 functional safety standardIEC 61508-2 functional safety standardIEC 61508-3 functional safety standardIEC 61508-4 functional safety standardIEC 61508-5 functional safety standardIEC 61508-6 functional safety standardIEC 61508-7 functional safety standardISO 13849-1 functional safety standardIEC 62061 functional safety standardProduct certifications TÜVCULusIP degree of protection IP54 mounting area)EN/IEC 60947-1IP40 housing)EN/IEC 60947-1IP20 terminals)EN/IEC 60947-1Ambient air temperature for storage-13…185 °F (-25…85 °C)Relative humidity5…95 % non-condensingOrdering and shipping detailsNbr. of units in pkg.1Package weight(Lbs)15.34 oz (435 g)Packing UnitsUnit Type of Package 1PCEPackage 1 Height 2.56 in (6.5 cm)Package 1 width 5.31 in (13.5 cm)Package 1 Length 6.10 in (15.5 cm)Unit Type of Package 2BB1Number of Units in Package 21Package 2 Weight16.23 oz (460 g)Package 2 Height 2.52 in (6.4 cm)Package 2 width 5.24 in (13.3 cm)Package 2 Length 6.02 in (15.3 cm)Unit Type of Package 3S03Number of Units in Package 316Package 3 Weight17.13 lb(US) (7.77 kg)Package 3 Height11.81 in (30 cm)Package 3 width11.81 in (30 cm)Package 3 Length15.75 in (40 cm)Offer SustainabilitySustainable offer status Green Premium productEU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)EU RoHSDeclarationMercury free YesRoHS exemption information YesChina RoHS Regulation China RoHS DeclarationEnvironmental Disclosure Product Environmental ProfileCircularity Profile End Of Life InformationWEEE The product must be disposed on European Union markets following specificwaste collection and never end up in rubbish bins.PVC free YesDimensions DrawingsDimensionsFront and Side Views(A) :Product drawing(B) :Screw clamp terminal (C) :Side view(1) :Removable terminal blocks, top (2) :Removable terminal blocks, bottom (3) :LED indicators(4) :Start function selector (5) :Function selector (6) :Delay factor selector (7) :Delay base selector(8) :Connector for optional output extension module (lateral)(9) :Sealable transparent coverMounting and Clearance Mounting to DIN railScrew-mountingConnections and SchemaWiring Drawing(1) :A1-A2 (Power supply)(2) :S11-S12-S21-S22-S31-S32 (Single-channel safety input)(3) :Y1-Y2 (Start)13-23-33-47-57-67-75-14-24-34-48-58-68-76 :OutputEXT :Connector for optional extension module B2 :Common ground terminalZ1 :Pulsed output for diagnostics, not safety-related Z2 :Solid state output, not safety-related。
SH3903正文
石油化工建设工程项目监理规范1 范围本规范规定了石油化工建设工程勘察、设计、设备采购、施工和保修等各阶段监理工作的要求。
本规范适用于新建、改建、扩建的石油化工建设工程项目的监理工作。
2 规范性引用文件下列文件中的条款通过本规范的引用而成为本规范的条款。
凡是注日期的引用文件，其随后所有的修改单（不包括勘误的内容）或修订版均不适用于本规范，然而，鼓励根据本规范达成协议的各方研究是否可使用这些文件的最新版本。
凡是不注日期的引用文件，其最新版本适用于本规范。
GB/T50328 建设工程文件归档整理规范SH3503—2001 石油化工工程建设交工技术文件规定3 术语和定义3.1项目监理机构Project Supervision Organization监理单位派驻工程项目负责履行委托监理合同的组织机构。
3.2监理工程师Supervision Engineer取得国家或石油化工行业监理工程师资格证书并经注册的监理人员。
3.3总监理工程师Chief Supervision Engineer由监理单位法定代表人书面授权，全面负责委托监理合同的履行、主持项目监理机构工作的监理工程师。
3.4总监理工程师代表Representative of Chief Supervision Engineer经监理单位法定代表人同意，由总监理工程师书面授权，代表总监理工程师行使其部分职责和权力的项目监理机构中的监理工程师。
3.5专业监理工程师Discipline Supervision Engineer根据项目监理岗位职责分工和总监理工程师的指令，负责实施某一专业或某一方面的监理工作，具有相应监理文件签署权的监理工程师。
3.6监理员Supervisor经过监理业务培训，具有同类工程相关专业知识，从事具体监理工作的监理人员。
3.7监理大纲Supervision Outlines监理单位在监理项目投标过程中，为承揽监理业务而编制的项目监理方案性文件。
纯中文版SHT-3903--监理用表
附录BAttachment B（规范性附录）(Regulatory Attachment)监理单位用表Forms for CS/CMCB.1 表SH/T3903—~B.8给出了段监理单位用表格局,表号与名称：-----SH/T 3903－B.1 监理工程师通知单;-----SH/T 3903－B.2 工程暂停令;-----SH/T 3903－B.3 工程款付出证书;-----SH/T 3903－B.4 工程临时延期审批表;-----SH/T 3903－B.5 工程最终延期审批表;-----SH/T 3903－B.6 费用索赔审批表;-----SH/T 3903－B.7 监理备忘录;-----SH/T 3903－B.8 监理日记.B.2 表SH/T3903—~B.9.6给出了段监理月报用表格局,编号与名称-----SH/T 3903－B.9.1 监理月报封面;-----SH/T 3903－B.9.2 月工程情形概要;-----SH/T 3903－B.9.3 月工程质量掌握情形评析;-----SH/T 3903－B.9.4 月工程进度掌握情形评析;-----SH/T 3903－B.9.5 月HSE治理情形评析;-----SH/T 3903－B.9.6 月工程费用掌握情形评析.附录CAttachment C（规范性附录）(Regulatory Attachment)监理单位用表General Forms for Each Party表SH/T3903—C.1.表SH/T3903—C.2给出了监理工作各方用表格局,表号与名称：------SH/T 3903－C.1 监理工作接洽单------SH/T 3903－C.2 工程变动单。