step7 v5.4 安装

合集下载

STEP.7.V5.4.中文版.SP3中安装S7_PLCSIM_V54_SP3的解决办法

我相信很多用户都和我一样最开始安装了STEP.7.V5.4.中文版.SP3但是在使用的过程中发现运行不了仿真这个功能，即仿真开关按钮是灰色的，我也相信你们和我一样在网上收索了大量的资料来解决这个问题，呵呵很不幸的是你们和我的处境一样，浏览了大量的资料最后才发现没有一种方法是可以直接帮我们解决问题的，我最开始也是愁与这个问题中在网上浏览了一整天，唉最后才发现都不行！什么事情都还是要靠自己去摸索，本人学的是机电一体化技术但是计算机缺是我的强项，经过自己不断的摸索终于成功的解决了上述问题先将他们分享如下：一、安装好STEP.7.V5.4.中文版.SP3二、在网上随便下载个S7_PLCSIM_V54_SP3网上很多的，到处都是！在桌面新建一个文件夹（注意千万不要用中文，即文件夹的名字中不能出现中文我当时重命名为plsm）三、将下载来的S7_PLCSIM_V54_SP3解压到刚刚创建的文件夹中，解压后的文件夹打开如下图四、将我们刚刚解压的文件夹剪切到你安装STEP.7.V5.4.中文版.SP3的那个文件夹中，我是选择安装在e盘step7中的，（注这一步很关键，很多时候你发现即使你成功安装了S7_PLCSIM_V54_SP3你会发现当你点击仿真的时候不会出现仿真窗口，这个也正是我当初迷茫的原因）还要说明的是只需要放在安装文件夹的第一层目录下就可以，如我的是E盘step7那么我就只需打开E盘step7让后将上面的plsm粘帖在step7文件夹下就可以。

千万不要放在step7下的第二层文件夹中哦不然到时候你们的启动不了了可不要怪我哦！下面就进入安装的步骤了：说明不要直接就点击plsm中的选择plsm中的文件夹中的那个很多人都说下载的S7_PLCSIM_V54_SP3安装不就是这个原因，要么要你一直重启要么就是说你缺少了sp3 sp4 sp5组建就是因为直接就点击了plsm中的那个steup的原因！一直安装下去，注意安装的目录也要选择你的plsm文件夹即顺利安装最后启动你的你就会发现仿真可以运行了！。

step7v5.4的安装和升级方法

STEP7 V5.4官方中文版下载简介：西门子STEP7 V5.3 SP2 中文版下载西门子 step7 V5.3是用于SIMATIC S7-300/400站创建可编程逻辑控制程序的标准软件，可使用梯形图逻辑、功能块图和语句表进行编程操作。

PCD1 和 PCD2 Saia-PCD 控制设备也可以用 Siemens Step7 来编程。

使用Step7编程可以在Saia PCD 上实现某些集成在Step7内的功能.不只是兼容在常规功能之外还具备以下的特点:DK 3964 R/RK 512 等标准协议已经集成到控制器内，不需要额外驱动MPI 接口集成 modem 支持: 内置modem 功能，可进行远程编程、诊断或数据传输编程不需 MPI 转换器，直接通过PC上的 RS232 口现场总线通讯功能. 控制器功能中已集成了Profibus DP Master / Slave, Profibus FMS 和 LONWorks.利用web server进行监控. 储存 HTML 网页、图片、PDF 文件等到控制器里供通用浏览器查看扩展操作系统功能如保护技术秘密，防止被非法查看或复制用Siemens 原装Step7编程直接运行Step7程序，毋需转换兼容普遍使用的编程环境，使用熟悉的编程测试功能用STL, LAD, FBD编程使用Siemens工程工具，监视修改变量，程序状态等相同指令集 (Siemens S7-300 和S7-400系列)一些特殊功能，如串口通讯、计数等可在系统功能 (SFCs)中编辑Step7 v5.3 Professional 正确安装方法Step7 v5.3 Professional 安装步骤1 安装Windows 2000 SP4/xp Professional+SP1/SP2 (xp home除外）2 安装 IE6\IE6b2800\ie6setup.exe3 设置 Windows 2000 默认语言为"英语(美国)"控制面板->区域选择->设置默认值, 选择"英语(美国)"4 安装Step7 v5.3\ STEP7_PROFESSIONAL_2004\Setup.exe注: 源文件的路径不能有汉字, 否则Setup.exe不能执行选择: Step7 v5.3S7-SCL v5.3S7-GRAPH v5.3 (Graph 7 )S7-PLCSIM v5.3 (PLC仿真)Aotomation License Manager v1.1选择语言:English提示: Transfer License KeysYes, Transfer should take place during installationNo, Transfer license keys later选择: No, Transfer license keys later5 恢复Windows 2000 默认语言为"中文(中国)"6 安装 Step7 v5.3 和Graph v5.3授权将"\Step7 v5.3+graph5.3授权"目录拷贝到硬盘执行STEP7V53key.exe安装 Step7 v5.3授权A1710453执行s7graph53.exe安装Graph v5.3授权A1S7GR53注: 我并没有先装Step7 v52有些朋友将WIN2000的"当前用户的设置/您的区域设置"设为英语,这是没有用的,应将"系统的语言设置/设置默认值"设为英语才有效安装与运行环境STEP 7是面向MS Windows 2000 Professional和MS Windows XP Professional而发布的。

step7安装教程

step7安装教程Step 7 安装教程在进行任何安装之前，确保你已经完成了前六个步骤，包括选择正确的软件和准备安装所需的文件。

以下是一个简单的步骤教程，以帮助你顺利完成安装过程。

请按照以下步骤操作：1. 首先，打开你需要安装的软件包文件。

这通常是一个.exe或.msi文件，你可以从官方网站或其他可靠的来源下载。

2. 双击打开软件包文件。

你可能会看到一个弹出窗口，询问你是否要运行此文件。

点击“是”或“运行”，以继续安装过程。

3. 在安装向导窗口中，你将被要求接受软件许可协议。

请仔细阅读协议，并在同意之后点击“下一步”或“接受”按钮。

4. 接下来，你可能会被要求选择软件的安装位置。

默认情况下，软件将安装在C盘的“Program Files”文件夹中。

如果你希望将其安装到其他位置，请点击“浏览”按钮，并选择一个新的目录。

5. 点击“下一步”按钮，进入下一个步骤。

你可能会看到一些其他设置选项，例如创建桌面快捷方式或添加启动菜单项。

根据你的需求选择这些选项，然后点击“下一步”。

6. 现在，你将看到一个总结页面，显示安装过程中所做的选择。

仔细检查并确保一切都符合你的要求。

如果需要更改某些设置，点击“上一步”按钮返回对应的步骤进行修改。

7. 最后，点击“安装”按钮，开始安装软件。

这可能需要一些时间，具体取决于软件的大小和你的计算机性能。

8. 安装完成后，你可能会看到一个成功的安装消息。

点击“完成”按钮，关闭安装向导。

恭喜！你已经成功安装了你选择的软件。

现在你可以开始使用它了。

确保检查软件的安装位置，以便在需要时进行修改或卸载。

请注意，由于不同软件的安装过程可能会有所不同，上述步骤仅为常见的安装指南。

对于特定的软件，最好参考它们的官方文档或安装指南，以确保正确地进行安装。

希望这个教程对你有所帮助，祝你顺利完成软件安装！。

STEP7安装教程

STEP7安装教程步骤1：准备工作在开始安装之前，首先需要确保您的计算机符合安装要求。

STEP7要求运行在Windows操作系统上，支持的版本有Windows 7、Windows 8和Windows 10。

确保您的计算机已经安装了这些操作系统，并且具备足够的存储空间和内存。

步骤2：获取安装程序步骤3：运行安装程序找到之前保存的安装程序文件，双击运行它。

会弹出一个安装向导窗口，根据向导的指示逐步进行安装。

在向导中，您需要选择安装语言、安装路径和组件。

建议选择默认设置，以确保安装过程的顺利进行。

步骤4：激活许可证STEP7是一款商业软件，需要激活许可证才能正常使用。

在安装完成后，您将获得一个许可证文件或者许可证代码。

根据您的情况，选择其中一种方式进行激活。

如果您获得了许可证文件，将其保存在计算机的合适位置。

如果您获得了许可证代码，将其复制到剪贴板中。

步骤5：启动STEP7完成安装和许可证激活后，您可以在计算机上找到STEP7的快捷方式。

双击打开STEP7，它将会加载并显示出主界面。

在主界面中，您可以开始进行编程、配置和管理西门子自动化设备。

步骤6：连接设备在使用STEP7之前，您需要将计算机与您需要编程和配置的设备连接起来。

通过串口、以太网或者其他接口，将计算机与设备连接。

确保连接稳定并且工作正常。

在主界面的“连接”菜单下，您可以找到与设备连接的选项。

步骤7：开始编程和配置连接完成后，您可以开始使用STEP7进行编程和配置了。

根据您的需求，选择相应的功能模块和操作界面，进行相应的操作。

通过STEP7，您可以创建新的项目、编写程序、配置设备参数等。

STEP7 V5.4安装说明

STEP7 V5.4官方中文版下载简介：西门子STEP7 V5.3 SP2 中文版下载西门子step7 V5.3是用于SIMATIC S7-300/400站创建可编程逻辑控制程序的标准软件，可使用梯形图逻辑、功能块图和语句表进行编程操作。

PCD1 和PCD2 Saia-PCD 控制设备也可以用Siemens Step7 来编程。

使用Step7编程可以在Saia P CD上实现某些集成在Step7内的功能.不只是兼容在常规功能之外还具备以下的特点:DK 3964 R/RK 512 等标准协议已经集成到控制器内，不需要额外驱动MPI 接口集成modem 支持: 内置modem 功能，可进行远程编程、诊断或数据传输编程不需MPI 转换器，直接通过PC上的RS232 口现场总线通讯功能. 控制器功能中已集成了Profibus DP Master / Slave, Profibus FMS 和LONWorks.利用web server进行监控. 储存HTML 网页、图片、PDF 文件等到控制器里供通用浏览器查看扩展操作系统功能如保护技术秘密，防止被非法查看或复制用Siemens 原装Step7编程直接运行Step7程序，毋需转换兼容普遍使用的编程环境，使用熟悉的编程测试功能用STL, LAD, FBD编程使用Siemens工程工具，监视修改变量，程序状态等相同指令集(Siemens S7-300 和S7-400系列)一些特殊功能，如串口通讯、计数等可在系统功能(SFCs)中编辑Step7 v5.3 Professional 正确安装方法Step7 v5.3 Professional 安装步骤1 安装Windows 2000 SP4/xp Professional+SP1/SP2 (xp home除外）2 安装IE6\IE6b2800\ie6setup.exe3 设置Windows 2000 默认语言为"英语(美国)"控制面板->区域选择->设置默认值, 选择"英语(美国)"4 安装Step7 v5.3\ STEP7_PROFESSIONAL_2004\Setup.exe注: 源文件的路径不能有汉字, 否则Setup.exe不能执行选择: Step7 v5.3S7-SCL v5.3S7-GRAPH v5.3 (Graph 7 )S7-PLCSIM v5.3 (PLC仿真)Aotomation License Manager v1.1选择语言:English提示: Transfer License KeysYes, Transfer should take place during installationNo, Transfer license keys later选择: No, Transfer license keys later5 恢复Windows 2000 默认语言为"中文(中国)"6 安装Step7 v5.3 和Graph v5.3授权将"\Step7 v5.3+graph5.3授权"目录拷贝到硬盘执行STEP7V53key.exe安装Step7 v5.3授权A1710453执行s7graph53.exe安装Graph v5.3授权A1S7GR53注: 我并没有先装Step7 v52有些朋友将WIN2000的"当前用户的设置/您的区域设置"设为英语,这是没有用的,应将"系统的语言设置/设置默认值"设为英语才有效安装与运行环境STEP 7是面向MS Windows 2000 Professional和MS Windows XP Professional而发布的。

README-step7 v5.4 安装说明

SIMATICSTEP 7 V5.4 Programming Software for SIMATIC S7 / M7 / C7Notes on Installation and UsageThese notes should be considered more up-to-date than the information in other documents. Read the notes carefully, because they contain information on installing and using STEP 7 V5.4.Note when printing the file that the left and right margins are set to a width of 25 millimeters for A4 portrait format.ContentsNotes on Installation1 Contents of the Consignment2 Hardware Requirements3 Software Requirements3.1 Operating Environment3.2 Memory Requirements3.3 Compatibility with Other Software Products3.3.1 Rational ClearCase3.3.2 Network Settings when Using other Software Products3.3.3 Interdependency with An Installed S7 Fault-tolerant System3.4 Online Documentation3.5 Upgrading from an earlier STEP 7 version and changing over from STEP 7Lite3.5.1 STEP 7 V5.4 Upgrade3.5.2 STEP 7 V5.4 PowerPack4 Installation4.1 Installing STEP 7 V5.44.2 License Key of STEP 7 V5.44.3 Uninstalling STEP 7 V5.44.4 Additional Notes on Installation4.4.1 Using a Wheel-Mouse4.4.2 Notes on using Communication Cards in PCs/ PGs4.4.3 Installing on foreign-language operating systemsNotes on Usage (Release Notes)1 New Features and Changes in the New Version2 Notes on Configuring and Operating the Software2.1 How STEP 7 Fulfills the IEC Standard2.2 General Notes2.3 Using Network Drives2.4 Multi-user Operation2.5 Multiprojects2.6 Swapping Different Versions of STEP 72.7 Libraries and Sample Projects2.8 SIMATIC Manager2.9 Password Protection2.10 Using Symbolic Names (Upper and Lower Case for Symbols)2.11 Hardware Configuration (Central)2.12 Hardware Configuration (PROFIBUS DP)2.13 Hardware Configuration (PROFINET IO)2.14 Redundant I/O: Channel-granular Redundancy2.15 Diagnosing Hardware2.16 Configuring Connections2.17 MPI / PROFIBUS Network Settings2.18 SIMATIC M72.19 Ladder Logic, Function Block Diagram, and Statement List, Reference Data 2.20 Message Configuration2.21 Translating Texts2.22 Managing Multilingual Texts2.23 S7-PDIAG2.24 Converting S5 Programs to S7 Programs2.25 Converting TI Programs to S7 Programs2.26 Fault-tolerant Systems2.27 Note on Using Foreign-Language Character Sets2.28 Note on the use of SIMATIC Logon3 Notes on DocumentationNotes on InstallationThe installation notes contain important information that you will require in order to install STEP 7 V5.4 Read these notes before installing the software.1 Contents of the ConsignmentThe two CDs in the content of consignment contain a complete version of STEP 7 V5.4.This version is in 5 languages and can be run using the operating systems listed underChapter 3.1.STEP 7 V5.4 is currently supplied on two CDs "STEP 7 V5.4 CD1/2" and "STEP 7 V5.4CD2/2" " in the contents of consignment with a floating, upgrade, rental or trial license:STEP 7 V5.4 (Floating License)Order number: 6ES7810-4CC08-0YA5The following items are included in this package:∙ 2 CDs STEP 7 (CD1/2 and CD2/2)∙ 1 License Key Disk∙ 1 Certificate of License∙ 1 Product InformationSTEP 7 V5.4 (Floating License) (V3/V4/V5.x > V5.4)Order number: 6ES7810-4CC08-0YE5The following items are included in this package:∙ 2 CDs STEP 7 (CD1/2 and CD2/2)∙ 1 License Key Disk∙ 1 Certificate of License∙ 2 Product InformationsSTEP 7 V5.4 PowerPack (Floating License)Order number: 6ES7810-4CC08-0YC5The following items are included in this package:∙ 2 CDs STEP 7 (CD1/2 and CD2/2)∙ 1 License Key Disk∙ 1 Certificate of License∙ 2 Product InformationsSTEP 7 V5.4 Rental License (50h)Order number: 6ES7810-4CC08-0YA6The following items are included in this package:∙ 2 CDs STEP 7 (CD1/2 and CD2/2)∙ License Key Disk∙ 1 Certificate of License∙ 1 Product InformationSTEP 7 V5.4 Trial License (14 days)Order number: 6ES7810-4CC08-0YA7The following items are included in this package:∙ 2 CDs STEP 7 (CD1/2 and CD2/2)Contents of the STEP 7 CDsCD1/2 (Installation CD)∙ STEP 7 V5.4∙ Converter for the conversion of TI405 and TI 505 programs∙ Automation License ManagerCD2/2∙ Shareware version of Acrobat Reader in five languages, with which you can view and print the supplied manuals∙ Product Notes: "What's New"∙ Product Notes: "New Modules"∙ Product Notes: "Central Installation"∙ Manual: "Getting Started: Working with STEP 7"∙ Manual: "Programming with STEP 7"∙ Manual: "Configuring Hardware and Communication Connections with STEP 7"∙ Manual: "System Modification in RUN Mode via CiR"∙ Manual: "Automation System S7-400H - Fault-Tolerant Systems"∙ Manuals: "NCM S7"∙ Manual: "From S5 to S7"∙ Manual: "Ladder Logic (LAD) for S7-300/400"∙ Manual: "Statement List (STL) for S7-300/400"∙ Manual: "Function Block Diagram (FBD) for S7-300/400"∙ Manual: "Standard and System Functions for S7-300/400"∙ Manual: "Standard and System Functions for TI STEP 7 Converter"∙ Manual: "PID Control"∙ Manual: "PID Temperature Control"∙ Compatibility List∙ SIMATIC iMap STEP 7 Addon∙ Description of the Command InterfaceThe manuals are available in an installable form on CD1/2 and are optionally available on your computer after STEP 7 has been installed. If you do not install the manuals, you can also view at any time on CD2/2.In order to work with the STEP 7 V5.4software, you need a programming device or a PC with the following minimum requirements for processor speed/performance, RAM and graphics capability:Operating System Minimum Requirements for:Processor RAM Graphics--------------------------------------------------------------------------------------------------------------------------∙ MS Windows 2000 Professional 600 Mhz 512 MB*) XGA 1024x78616 Bit color depth ∙ MS Windows XP Professional 600 Mhz 512 MB*) XGA 1024x78616 Bit color depth ∙ MS Windows Server 2003 2.4 GHz 1 GB XGA 1024x76816 Bit color depth *) A minimum RAM of 1 GB MB is recommendedUse a programming device or PC with the latest performance capabilities if you are editing extensive STEP 7 projects or working with hardware configurations containing several hundred modules (CPUs, slaves, I/O devices, etc.).In addition, you will need an external prommer for SIMATIC memory cards / MMC if you are using a PC and want to save your user programs to EPROMs and a SIMATIC NET interface if you want to use online functions to the PLC system with your personal computer.3.1 Operating EnvironmentOperating SystemsSTEP 7 V5.4 is a 32-bit application that is released for the following operating systems: Operating System Service Pack------------------------------------------------------------------------------------------------------------------------∙ MS Windows 2000 Professional SP4∙ MS Windows XP Professional SP 1 (or SP1a) or SP2∙ MS Windows Server 2003 with or without SP1 as a workstation computer (Exception: SIMATIC M7, refer to Notes on Usage, Chapter 2.17)You can find information about the operating systems on the Internet at Microsoft.STEP 7 V5.4 will not run in:∙ MS Windows 3.1∙ MS Windows for Workgroups 3.11∙ MS Windows XP HomeThe operating systems MS Windows 95, MS Windows 98SE, MS Windows Millenniumand MS Windows NT 4.0 are no longer supported since STEP 7 V5.3.Internet ExplorerAll operating systems must be using MS Internet Explorer 6.0 (or higher).User RightsRegarding user rights as of STEP 7 V5.3 incl. SP2, please observe the following:To be able to work with STEP 7 in MS Windows 2000/2003/XP, you must have loggedon at least as the user (not as a guest). You must possess administrator's rights forinstalling the STEP 7 software and also for setting up modules using the "Setting thePG/PC Interface" application. When using optional packages please observe the rightsrequired by the respective optional packages.If projects are saved on NTFS drives, the users must be granted full access here. Thisalso applies to the folders with the HSP updates (default: C:/HWUPDATES). Accesswithin S7PROJ is automatically granted to all users.Note:∙ The executability under user rights is only enabled for STEP 7 itself. Operation under user rights for optional packages is not guaranteed. Administrator or primary userrights may be required here.∙ After installing / uninstalling new hardware, the computer must be run at least once under administrator rights.File SystemsSTEP 7 achieves a slightly lower performance when operating on a MS Windows NTfile system (NTFS) as opposed to a FAT file system.Hibernation ModeShifting to hibernation mode is generally allowed by STEP 7. However, hibernationmust not be triggered if online connections are open or projects are being accessed bySTEP 7 applications via a network.In such case, online connections could be unintentionally terminated, and open projects on networks may experience data loss.For these reasons, the energy options for the operating system in the Windows ControlPanel should be set so that hibernation is not automatically triggered (by timer).Hibernation should not be triggered manually by the user in the cases mentionedabove.3.2 Memory RequirementsMemory Requirements for STEP 7Depending on your installation requirements and the number of languages installed,STEP 7 V5.4 requires between approx. 650 MB and 900 MB of memory on your harddisk. The exact value also depends on your operating system and on the file systemused on your programming device/personal computer.MS Windows Swap FileThe supported Windows operating systems also require additional free space on thehard disk (typically C:) for their swap files, depending on the memory configuration. Youshould keep at least double the value of the RAM free. (Example: If you have 512Mbytes of RAM, you will require another 1024 Mbytes of free space on the hard disk forthe swap file after STEP 7 has been installed.) Depending on the size of the project, itmay be necessary to have a larger swap file, for example, when copying an entireproject (twice the size of the project on the hard drive in addition). If the free memoryarea for the swap file is too small, errors may occur (the program could possibly crash).Additional Windows applications which run parallel to STEP 7 V5.4 (such as MicrosoftWord) also require additional hard disk space for the swap file.In order to ensure that the required memory for the swap file is really available, theminimum size for the swap file should be set to the above value. This can be set inWindows (for example, Windows XP Professional) in the taskbar in Start > Settings >Control Panel (in System > Advanced > System Performance > Settings > Advanced).You must make certain that you have enough free memory on the drive where theproject data are located. If there is not enough memory on the drive, the project datamay be destroyed during an operation (for example, when compiling an STL source fileinto blocks). We also recommend that you do not store the project data on the samedrive as the Windows swap file.3.3 Compatibility with Other Software Products3.3.1 Rational ClearCaseSTEP 7 projects must not be stored on ClearCase drives; that is, drives that are linkedto a ClearCase View (MVFS).3.3.2 Network Settings when Using other Software ProductsIf you are using other software products (for example, mail providers) on a programmingdevice or PC with STEP 7, observe the additional notes on network settings in thesection "Using Network Drives" (in Notes on Usage) in the second half of this READMEfile.3.3.3 Interdependency with An Installed S7 Fault-tolerant SystemThe configuration of fault-tolerant systems (H system) is integrated as of STEP 7 V5.3.If STEP 7 V5.4 is installed on a PC on which the S7 H Systems add-on package isinstalled, this is removed. Do not install the “S7 H Systems” optional package again. It isno longer required.3.4 Online DocumentationThe online help in STEP 7 V5.4 is split into two sections.You can find notes on the current context in the same way as with the standardWindows help.The general section of the online help is based on the HTML format.You can find more information on the structure of the documentation in Chapter 3 (inNotes on Usage) in the second half of this README file.3.5 Upgrading from an earlier STEP 7 version and changingover from STEP 7 Lite3.5.1 STEP 7 V5.4 UpgradeTo install the upgrade package, you must have a valid license for STEP 7 V3.x, V4.x,V5.0, V5.1, V5.2 or V5.3.--------------------------------------------------------------------------------------------------------------------------NoteTake into account that an upgrade may require the operating system to be replaced,because as of STEP 7 V5.3 older operating systems are no longer supported (refer toChapter 3.1). Further information on the upgrade is contained in the productinformation.The existing authorization / License Key with the AuthorsW / Automation LicenseManager program has to be saved to a floppy disk before the operating system isreplaced.--------------------------------------------------------------------------------------------------------------------------3.5.2 STEP 7 V5.4 PowerPackThe PowerPack is used to upgrade from a STEP 7 Lite V2.0 installation to STEP 7 V5.4.To install the PowerPack, you must have a valid license for STEP 7 Lite.--------------------------------------------------------------------------------------------------------------------------NoteTake into account that an upgrade may require the operating system to be replaced, because as of STEP 7 V5.3 older operating systems are no longer supported (refer to Chapter 3.1). Further information is contained in the product information.If STEP 7 Lite is installed on a PC running MS Windows XP Home, you will also have to upgrade the operating system since STEP 7 is not released for use on Windows XP Home.The existing authorization / License Key with the AuthorsW / Automation License Manager program has to be saved to a floppy disk before the operating system is replaced.--------------------------------------------------------------------------------------------------------------------------4 Installation4.1 Installing STEP 7 V5.4When installing STEP 7 V5.4, you can overwrite existing installations of STEP 7 V5.1,V5.2 or V5.3 whilst observing the authorized operating systems (refer to Chapter 3.1).You do not have to uninstall these STEP 7 versions and optional packages prior to theinstallation. However, you must uninstall older versions and their optional packagesbeforehand.In order to obtain the optimum display of the information during the Setup, you shouldset the color scheme in the control panel of your programming device/personalcomputer to at least 65536 colors.Before starting the Setup program, close all applications (such as Microsoft Word, etc.)and the "Control Panel" window, since you will need to restart Windows following theinstallation of STEP 7 V5.4so that all system variables can be entered completely.Insert the STEP 7 CD 1/2 in the drive. The setup program will guide you through theinstallation. The setup program starts automatically after the STEP 7 CD is inserted inthe drive. If you have disabled this function on your computer, start the setup programby double-clicking the SETUP.EXE program in the root directory.In the component selection box, select the Acrobat Reader, STEP 7, the AutomationLicense Manager, Acrobat Reader and any other components that you wish to install.If you would like to change the installation path suggested in the setup during the STEP7 installation, please note that you cannot install it directly to a root directory (e.g. D:) onyour computer. There has to be at least one higher-level folder such as "STEP7", forexample, D:\STEP7.These components will then be installed and entries will be made in Microsoft Windowsfiles.The following notes are intended to help you make the correct user entries requiredduring the Setup program:∙ The drive on which you install your STEP 7 V5.4system can be selected freely. On some PCs/programming devices, you will not be able to select the drive via theselection list. In this case, simply enter the drive with its path in the appropriate inputbox (for example, "e:\Siemens/Step7"). Note that all STEP 7 optional packages mustalso be installed on this drive, so there must be sufficient space available (see the"Memory Requirements" section). Avoid installing STEP 7 on a SUBST drive.∙ Before you use STEP 7 V5.4, Windows must be restarted. Only then do all of the Microsoft Windows entries become active. If you do not restart Windows, STEP 7V5.4cannot run properly and data may be lost. If the installation procedure isaborted, you will also need to restart Windows.∙ Refer to the tables in the S7KOMP_B.PDF file (the directory "Step7" following installation) for information on which versions of the optional packages can run withSTEP 7 V5.4 under the respective operating systems.∙ STEP 7 must not be installed in a directory the path of which includes characters that are not listed in the A SCII character set (refer to Chapter 2.26, section “Notes onUsage”).Contact your Siemens representative for more up-to-date information or check ourwebsite: http://www.ad.siemens.de/support.If the required version is not available on the computer, Acrobat Reader is automaticallysuggested for installation. When prompted, the STEP 7 CD2/2 must be inserted duringthe installation.--------------------------------------------------------------------------------------------------------------------------NoteSTEP 7 registers itself in the system files of the MS Windows operating system. Youcannot move or rename STEP 7 files or folders using Microsoft Windows utilities suchas the Explorer or modify STEP 7 data in the Microsoft Windows registry. The programmay no longer run properly after such modifications.--------------------------------------------------------------------------------------------------------------------------4.2 License Key of STEP 7 V5.4Before you can start working with STEP 7, you must transfer the license key from thelicense key diskette to the computer. There are two ways of doing this:∙ While you are installing STEP 7, the Setup program displays a message if there is no suitable license key installed on your computer. You can then decide whether youwant the license key to be installed by the “Setup” program or whether you want toinstall the license key manually at a later time using the “Automation LicenseManager” program.∙ If the license key cannot be installed during setup, continue the Setup program without installing the license key. Then boot the computer and install the license keyusing the taskbar in "Start > SIMATIC\License Simatic > License Management >Automation License Manger."To operate STEP 7 as of V5.3, you must make sure the Automation License Manager is installed.After the upgrade from V5.3 to V5.4, the License Key for V5.4 has to be used.-----------------------------------------------------------------------------------------------------------------NoteAs of STEP 7 V5.3, the authorization/the license key can be installed on all local drives.The Automation License Manger prevents the authorizations/license keys from beinginstalled on invalid drives or media such as RAM drives, diskettes or compressed drives(i.e. DBLSPACE). If the drive in a device is reported as being a "removable medium"and not, as usual, as a "hard drive", it will be treated as a CD, which means that nolicense key may be installed on it.In the case of compressed drives, you can install the authorization on the associatedhost drive.Read the notes on the Automation License Manager in the ALM README.WRI file onthe STEP 7 installation CD under "Automation License Manager\disk1\".Hidden files are stored in the folder "<Drive, on which the authorization/license key isinstalled>:\AX NF ZZ". These files and the folder must not be deleted, moved, or copied.They contain data required for the licensing of your software.If you do not adhere to these guidelines, the authorization/license key may beirretrievably lost.--------------------------------------------------------------------------------------------------------------------------Notes on error-free use of the license keys∙ The license key diskette must not be read-only. Because the license key diskette is to be used without write protection, there is a danger that a virus could betransferred from the hard disk to the diskette. You should therefore run a virus checkon your PC or programming device every time you install or remove a license key.∙ If you use an optimizing program that enables you to move fixed blocks of memory, only use this option once you have moved the license key from the hard disk back tothe license key diskette.∙ With the License Key a specially marked cluster is shown on the target drive. Some check programs display this cluster as "defective". Do not try to restore it.∙ Do not forget to transfer the license key to the license key diskette before formatting, compressing, or restoring your hard disk or before installing a new operating system.∙ If a backup copy of your hard disk contains copies of license keys, there is a danger that these copies may overwrite the valid installed license keys when you restoreyour backup data to the hard disk, thereby destroying the valid license keys. Toprevent a valid license key from being overwritten by a backup copy, you mustremove all license keys before you make a backup copy or exclude the license keysfrom the backup.Using the trial license:If no valid license key is installed for STEP 7 V5.4, a trial license key is used, which issupplied and installed by default together with STEP 7. However, STEP 7 can only beused for 14 days with this license key. When STEP 7 is started the first time without avalid license key, activation of the trial license key is offered.4.3 Uninstalling STEP 7 V5.4--------------------------------------------------------------------------------------------------------------------------NoteSoftware products must be uninstalled according to Microsoft Windows conventions.Use the Microsoft Windows application "Add/Remove Programs" (in the taskbar inStart > Settings > Control Panel > Add/Remove Programs) to remove your softwarepackage (for example, "STEP 7").As an alternative, you can use the setup program to uninstall a program.--------------------------------------------------------------------------------------------------------------------------If you uninstall an older version of STEP 7 in order to install STEP 7 V5.4, you mustfirst uninstall any existing optional packages for STEP 7 as well.When uninstalling the software, device drivers (for EPROM or communication interfaces) are not removed. If you have not installed any other products that require these driverson your computer, you should uninstall the drivers for the communication interface byopening the "Setting the PG/PC Interface" application (Start > SIMATIC > STEP 7 >Setting the PG/PC Interface and clicking the "Select" button) and uninstall the driverfor the EPROM interface with the "Configure Memory Card" option (Start > SIMATIC >STEP 7 > Configure Memory Card and clicking on "No EPROM driver").4.4 Additional Notes on Installation4.4.1 Using a Wheel-MouseWhen using a wheel mouse, be sure that the driver supplied by the manufacturer isinstalled. If this is not the case, STEP 7 will not always support the wheel feature of themouse.4.4.2 Notes on using Communication Cards in PCs/ PGsCP5611/ CP5611 Onboard (SIMATIC NET PROFIBUS Interface Via PCI Bus)In order to use the CP5611 card you require a PC or a programming device with PCIbus. You can then address SIMATIC stations via MPI or PROFIBUS (9.6 Kbps to 12Mbps).If you install STEP 7 after the CP has been inserted in the computer, the Plug and Playmechanism enters the CP5611 in the Device Manager of the Control Panel\System in"Other Devices". Therefore, the CP is sometimes not recognized when installing STEP7.In such cases, remove the CP5611 in the Device Manager after installing STEP 7 andreboot your computer.Observe the notes in the online help under "Setting the PG/PC Interface."CP5511 (SIMATIC NET PROFIBUS Interface Via PCMCIA)The card and socket services required to operate the card form part of MS 2000/XP.The CP5511 has plug-and-play facilities, meaning that the card is recognized by MSWindows 2000/XP and is integrated automatically into the system, provided yourPC/programming device has sufficient free resources (interrupt, address area).The CP 5511 cannot be operated in notebooks that are equipped with a PCMCIAcontroller of the type Omega Bridge II or TI 1130.Note:∙ The CP 551 does not support ACPI (Advanced Configuration and Power Interface) completely.∙ The CP 5511 is not supported under MS Windows Server 2003 .CP5512 (SIMATIC NET PROFIBUS Interface Via PC Card)A PC or a programming device with PC card slot is required to use the CP5512. Youcan then address SIMATIC stations via MPI or PROFIBUS (9.6 Kbps to 12 Mbps).MPI-ISA Card/ MPI-ISA OnboardThe MPI-ISA card and the MPI-ISA Onboard are no longer supported under MS Windows 2000 / XP and under MS Windows Server 2003.CP5411The CP5411 is not supported since STEP 7 V5.2.Hardnet ModulesIf you use the Industrial Ethernet network card CP1613 or the PROFIBUS cardsCP5613/14, you require the optional package SIMATIC NET PC additionally in a version compatible with STEP 7 V5.4 (see Compatibility List S7KOMP_A.PDF in the installation directory "STEP7").You require the SIMATIC-Net software as of V6.2 (CD 11/2003) to operate CP5613A2 and CP5614A2.General PC/Programming Device SettingsCommissioning Plug-and-Play Compliant ModulesTo commission the Plug-and-Play compliant modules (e.g. CP 5511, CP 5512 and CP 5611) in MS Windows 2000/XP/Server 2003, please proceed as follows:1. Install STEP 7. Close the dialog "Set PG/PC Interface" which appears at the end ofthe Setup without entering anything.2. Close MS Windows, shut down the PC and install the card. The CP 5511 or CP5512 can also be inserted in during operation.3. The communication module is installed automatically after the restart (or after CP5511 or CP 5512 has been inserted).4. Under Windows 2000, the message "New hardware found" is displayed. Confirm thismessage and all following dialogs (do not click on CANCEL).5. Under WinXP/Server2003, the Hardware Wizard is displayed. In the first dialogshown, select the option "No, not this time". Confirm all following dialogs (do not click on CANCEL).6. Then check the settings or select the desired interface configuration in "Set PG/PCInterface" (Start > SIMATIC > STEP 7>Set PG/PC Interface).If STEP 7 is installed after the plug-and-play compliant CPs (for example CP5611) on the computer, the CP is not recognized under MS Windows 2000/XP/Server 2003 when STEP 7 is installed.In this case remove the CP (network controller) after the STEP 7 has been installed in the device manager of the Control Panel\System under "Other components" and reboot your computer.Observe the information in the online help under "Set programming device/personal computer interface".When STEP 7 is installed on programming devices, the communication drivers are installed automatically and the default settings are accepted.The CP5611 has to be installed in the case of programming devices 7x0 PII / PIII,PG8x0 and PCs with onboard MPI interfaces.Setting of Interrupt and AddressMS Windows 2000/XP/Server 2003:。

STEP7 V5.4安装说明

STEP7 V5.4官方中文版下载简介：西门子STEP7 V5.3 SP2 中文版下载西门子step7 V5.3是用于SIMATIC S7-300/400站创建可编程逻辑控制程序的标准软件，可使用梯形图逻辑、功能块图和语句表进行编程操作。

PCD1 和PCD2 Saia-PCD 控制设备也可以用Siemens Step7 来编程。

使用Step7编程可以在Saia P CD上实现某些集成在Step7内的功能.不只是兼容在常规功能之外还具备以下的特点:DK 3964 R/RK 512 等标准协议已经集成到控制器内，不需要额外驱动MPI 接口集成modem 支持: 内置modem 功能，可进行远程编程、诊断或数据传输编程不需MPI 转换器，直接通过PC上的RS232 口现场总线通讯功能. 控制器功能中已集成了Profibus DP Master / Slave, Profibus FMS 和LONWorks.利用web server进行监控. 储存HTML 网页、图片、PDF 文件等到控制器里供通用浏览器查看扩展操作系统功能如保护技术秘密，防止被非法查看或复制用Siemens 原装Step7编程直接运行Step7程序，毋需转换兼容普遍使用的编程环境，使用熟悉的编程测试功能用STL, LAD, FBD编程使用Siemens工程工具，监视修改变量，程序状态等相同指令集(Siemens S7-300 和S7-400系列)一些特殊功能，如串口通讯、计数等可在系统功能(SFCs)中编辑Step7 v5.3 Professional 正确安装方法Step7 v5.3 Professional 安装步骤1 安装Windows 2000 SP4/xp Professional+SP1/SP2 (xp home除外）2 安装IE6\IE6b2800\ie6setup.exe3 设置Windows 2000 默认语言为"英语(美国)"控制面板->区域选择->设置默认值, 选择"英语(美国)"4 安装Step7 v5.3\ STEP7_PROFESSIONAL_2004\Setup.exe注: 源文件的路径不能有汉字, 否则Setup.exe不能执行选择: Step7 v5.3S7-SCL v5.3S7-GRAPH v5.3 (Graph 7 )S7-PLCSIM v5.3 (PLC仿真)Aotomation License Manager v1.1选择语言:English提示: Transfer License KeysYes, Transfer should take place during installationNo, Transfer license keys later选择: No, Transfer license keys later5 恢复Windows 2000 默认语言为"中文(中国)"6 安装Step7 v5.3 和Graph v5.3授权将"\Step7 v5.3+graph5.3授权"目录拷贝到硬盘执行STEP7V53key.exe安装Step7 v5.3授权A1710453执行s7graph53.exe安装Graph v5.3授权A1S7GR53注: 我并没有先装Step7 v52有些朋友将WIN2000的"当前用户的设置/您的区域设置"设为英语,这是没有用的,应将"系统的语言设置/设置默认值"设为英语才有效安装与运行环境STEP 7是面向MS Windows 2000 Professional和MS Windows XP Professional而发布的。

STEP7安装常见问题解决

关于STEP7的安装各种百度搜索啊问题比较多总结如下电驴的这个STEP7 V5.4版本SP3 的这里的不错/topics/2800840/STEP V5.4 incl SP3 Chinese安装说明:安装时的安装路径和安装文件夹名只能用英文或数字不能有中文，否则安装不上，1:执行Setup.exe安装主程序\STEP 7 V5.4\STEP7\Disk1\Setup.exe在安装过程中会提示安装授权，一定要点击第二行以后安装。

如果安装过程中提示需要重启系统，那么请运行这个小软件（重启也好，不想重启的可以下载这个小软件地址：/job-gkaction-download-pid-tpc-tid-58836-aid-36876.html）\STEP 7 V5.4\RESTART SYS PROB s7\un-restart.reg2:安装Simatic_S7_Plcsim_v54 仿真\STEP 7 V5.4\Simatic_S7_Plcsim_v54\S7-Plcsim\Disk1\setup.exe在安装过程中会提示安装授权，一定要点击第二行以后安装。

3.安装完成后统一进行授权，（1）安装编程软件授权\STEP 7 V5.4\Step7 v5.4LISENCE\（2）安装仿真软件授权\STEP 7 V5.4\Simatic_S7_Plcsim_v54\4.重启电脑后安装A.L.ME:\SOFTWARES\STEP 7 V5.4\Automation License Manager\Disk1\setup.exe最好再重启电脑，完成5.主程序就是SIMA TIC ManagerPLCSIM V5.4 SP3比PLCSIM V5.4的操作更简单，功能更强，可以同时对多个PLC仿真，还可以对S7通信仿真。

安装仿真时候遇到的问题在安装PLCSIM V5.4 SP3时，首先检测是否已经安装了PLCSIM V5.4。

step7 V5.4_cn教程

使能访问保护，有以下两种途径： Simatic ManagerOptionsAccess ProtectionEnable;如上图
项目名称右键Access ProtectionEnable，如下图：
SIMATIC Industrial Software STEP 7 V5.4 – Highlights
Step7 V5.4发布于2006年4月，将替代于2004年2月发布的Step7 V5.3。新版本的Step7 V5.4包含如下的新功能：
Step7 V5.4安装不再需要更改“区域语言”为英文，可以直接安装；
项目访问保护：只有已授权的客户可以打开受保护的项目。但前提是必须安装Simatic Logon选件。
A&D AS FA PS April-06 , 9
SIMATIC Software STEP 7 V5.4
项目访问保护
Automation and Drives
❖ 注意：进行访问保护的项目，无法在Step7 V5.4以下版本打开：
SIMATIC Industrial Software STEP 7 V5.4 – Highlights
Step7 V5.4订货号
SIMATIC Software STEP 7 V5.4
Automation and Drives
包含PLC Sim、SCL和Graph等工程工具
SIMATIC Industrial Software STEP 7 V5.4 – Highlights
A&D AS FA PS April-06 , 21
A&D AS FA PS April-06 , 2
Step7 V5.4软件安装及兼容性
Automation and Drives

安装STEP7 V5.5对STEP7 5.4有啥要求？

安装STEP7 V5.5对STEP7 5.4有啥要求？安装STEP75.4sp5之前对STEP75.4有啥要求？必须是在SP3基础上来安装SP5吗？我在STEP7V5.4SP1或SP2安装好后可不可以直接安装SP5？所达到的软件效果与在SP3上安装一样吗？最佳答案STEP7V5.5中文版的订货信息6ES7810-4CC10-0KA5SIMATICS7，STEP7V5.5中文版单用户浮动许可证6ES7810-4CC10-0KE5SIMATICS7，STEP7V5.5中文版升级包(V3.X-V5.4到V5.5)单用户浮动许可证STEP7V5.5中文版升级包：已拥有STEP7V3.x、V4.x、V5.0、V5.1、V5.2、V5.3或V5.4的客户可购买升级包。

安装升级包的前提是具有STEP7V3.x、V4.x、V5.0、V5.1、V5.2、V5.3或V5.4的有效许可。

概述：STEP7V5.5中文版以DVD形式提供，许可秘钥位于USB 存储棒中。

STEP7中文版支持中文和英文。

当从5种语言版本的STEP7切换到STEP7V5.5中文版时，应注意下列事项：安装STEP7V5.5中文版前，必须卸载STEP7和其它已安装的选项包。

安装STEP7V5.5中文版后，可像通常一样安装任何所需的中文和英文版本的选项包。

不支持中文的选项包只能运行在英语模式下。

5种语言版本的STEP7V5.5和STEP7V5.5中文版的许可证都一样。

文档：在产品DVD上包含STEP7文档(基本信息和参考手册)，为PDF文件支持的操作系统：MSWindowsXPProfessional中文版SP2或SP3MSWindowsXPProfessionalMultilingualUserInterfacePack(MU I)SP2和SP3MSWindows7ProfessionalChinese32BitMSWindows7MultilingualUserInterfacePack(MUI)32Bit但是，Windows7下的WindowsXP模式尚未发布。

step7在win7下的安装方法

STEP7 WIN7安装方法很多同学在学习plc的过程当中可能会用到西门子公司的STEP7编程软件，但是win7系统的同学们可能都发现了这样那样的问题而导致无法安装，我也遇到了这样的问题，本人将STEP7在WIN7上的安装方法发布如下，希望能帮助到您。

STEP1：首先当然是要有一个step7 v5.5中文版文件，一个 s7-PLCSIM SP4的仿真软件，和一个注册软件。

这样准备工作就完成了。

STEP2：先将各种杀毒软件，防火墙都关掉，然后安装step7 v5.5，正常的话10分钟左右就安完了，然后重新启动电脑。

STEP3：step7安装好了之后就是来安装仿真软件了，首先修改注册表，在“开始”，命令行中输入“regedit”调出注册表，然后在“HKEY_LOCAL_MACHINE—SOFTWARE-Siemens-AUTSW”里面新建一个项“PLCSim”然后在右边新建一个字符串值“TechnVersion”数值输入“K5.4.3.0”然后关闭。

STEP3：重启计算机。

STEP4:把各种该关闭的先关闭，然后安装s7-plcsim sp4各种直接点。

STEP5：重启计算机。

STEP6：打开注册软件，全选，按最上边最左边的小钥匙全部注册。

STEP7：重启计算机。

然后你就可以享用你的STEP7啦，编程，仿真一招鲜。

话说别人说直接安装个2010step7就可以了，我是没找到资源。

不过大家找到的话，自动忽略上述话语吧。

学长只能帮你到这了。

我不会再乱来了编辑《简爱》是一本具有多年历史的文学着作。

至今已152年的历史了。

它的成功在于它详细的内容，精彩的片段。

在译序中，它还详细地介绍了《简爱》的作者一些背景故事。

从中我了解到了作者夏洛蒂．勃郎特的许多事。

她出生在一个年经济困顿、多灾多难的家庭；居住在一个远离尘器的穷乡僻壤；生活在革命势头正健，国家由农民向工业国过渡，新兴资产阶级日益壮大的时代，这些都给她的小说创作上打上了可见的烙印。

西门子STEP7V5.4安装与使用

一安装与启动
1.准备安装如果从光驱中安装，则需要软件安装光盘。或者保存在硬盘上可安装的STEP 7软件。需要一个授权软件。设备方一般会提供给使用者。 2. 安装程序插入光盘，直接双击“Setup.exe”即可。安装过程将分为5部分连续进行。如果是保存在硬盘上的STEP7软件，安装时需要注意以下几点：
在西门子程序中，通常用到的地址符号有Ι(输入）、Q（输出）、M（位存储器)、T（计时器）、C（计数器）等。其中Ι、Q往往对应实际的输入输出，也就是说在现场存在这样一个元件，比如按钮、电磁阀。对于一个作为输入信号的按钮，实际的接线既可能接常开点，也可能接常闭点，那么它在梯形图中表现出来的地址节点是不是一定就和它的实际状况相一致呢？答案是否定的。这需要程序设计者根据编程情况选用。初学者往往难以理解这一点，经常认为如果一个按钮接了常开触点，那么在程序中它也一定是常开触点。显然这是错的。但是如果理解了这一点，则他已经开启了PLC学习之门，在以后过程中会顺利得多。
第3步，确定后开始复制。
提示：怎样理解PLC程序上传和下载？
如同上网一样，文件从我们电脑传送到服务器叫上传，从服务器传送到电脑叫下载。那么在这里，将笔记本电脑视为服务器（上位机），PLC看作客户端，从PLC复制程序到电脑，就是上传；从电脑传送程序到PLC，当然就是下载。
这是STEP 7 V5.4-SP3安装目录内容
3.安装许可证密钥安装期间，程序检查是否在硬盘上安装了相应的许可证密钥。如果没有找到有效的许可证密钥，将会显示一条消息，指示必须具有许可证密钥才能使用该软件。根据需要，可以立即安装许可证密钥或者继续执行安装、以后再安装许可证密钥。此时选择以后安装。等所有软件安装完成后，运行Simatic授权软件即可。

02step7 v55 sp4安装教程及授权

Step7 V5.5 SP4软件安装教程安装前必须关闭杀毒软件和安全卫士等。

否则安装失败后果自负概不退款的，安装软件默认磁盘安装不要随意更改磁盘路径，私自更改安装失败后果自负注意事项：有的人电脑安装step7的时候会提示上图错误对话框现在给出以下解决方案！如果不提示请直接安装！很多人受西门子软件安装需重新启动机器，然而启动机器后又提示重新启动机器，然而反复重新启动仍然出现这样的提示，导致软件不能安装。

现在给出解决方案：在注册表内“HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\ ”中删除注册表值“PendingFileRenameOperations”不要重新启动，继续安装软件。

现在可以安装更多程序而无需重启计算机了。

如图：右击删除！【XP系统注册表打开方法：开始菜单→运行→输入regedit→按enter回车键即可进入】【Win7 32位或64位系统注册表打开方法：开始菜单→搜索程序和文件→输入regedit→按enter回车键即可进入】如图1、将安装包下载到F盘，新建一个以英文命名的文件夹，文件夹里不能有中文。

否则会提示SSF未知无法安装2、右击解压文件-解压到当前文件夹3、解压出来有如图几个文件4、然后鼠标双击setup图标文件就可以直接安装点击下一步；等待安装····注意：选择典型安装→点击下一步；【磁盘路径建议不要做更改，默认磁盘安装，更改可能会导致软件无法运行以及删错软件的时候可能无法卸载出现再次安装软件会错误等问题。

】传送密匙选择否，我们等软件安装完成后在对软件进行传送密匙操作。

点击下一步；点击安装安装过程耐心等待···电脑配置不同安装时间不同，大概15-30分钟左右点击完成！！！桌面会有三个图标二、下面该对软件进行授权，打开授权工具注意：只需要对这2个文件授权即可打开桌面图标如下进入界面就可以正常使用了零六自动化工控软件旺旺ID：傲气仙子。