T650HVN07.2

合集下载

艾膈xStorage家型单相，3.6kW，4.2kWh，AC耦合，灰色蜂窝模式，PV6说明书

Eaton XSTH1P0361UC3EV2Eaton xStorage Home single-phase, 3.6 kW, 4.2 kWh, AC coupled, Grey/Honeycomb, PV 6General specificationsEaton xStorage Home single-phase XSTH1P0361UC3EV2XST 1Ph 3.6kW 4.2kWh Grey/Honeycomb3553340100666890 mm1230 mm 220 mm 159 kgCE Marked CE LVD RoHS CompliantEN 61000-6-3 EN 61000-6-2EN 62109 (part 1:2010, part 2:2011)Product NameCatalog Number Model CodeEANProduct Length/Depth Product Height Product Width Product Weight Compliances Certifications0.99 (Grid-Tie), 0.8 (ind) - 0.8 (cap) (Grid Tie-PF regulation, Off-Grid)3,6 kW17.4 A230V97%Residual current circuit breaker (RCCB)Overload-/temperature protectionShort-circuit protectedBuilt-in batteryWith data loggingEthernetWLANEmergency power compatible3600 VA550 V20 AIP20Power metering of critical loads and PV production Eaton xstorage Home Brochure enxStorage Home BrochurexStorage Home Product team guidelinesxStorage Home Installation manualEaton xStorage Home Quick Start Guide xStorage Home User Interface Manual xStorage Home User manualEaton xStorage Home Safety GuidelinesHow to onboard xStorage Home into the Cloud xStorage Home - Technical data sheetOutput power factorPower rangeAC current - maxAC inputEfficiency (PV to grid) - max Fitted with:Nominal output powerDC voltage on PV input - max Input Current on PV Input – Max Degree of ProtectionLED indicator colorMetering capability BrochuresCase studiesManuals and user guidesMultimediaTechnical data sheetsGreen (ON): Normal status. Red (ON): Fault status. Inverter is unable to connect to the grid.Green (Blinking): Communication activitySpecial featuresThe xStorage Home system offers three different power inverter ranges.Nominal DC Operating Voltage – Max550 VCoolingNatural airflowStorage temperature - max40 °CTopologyTransformerlessBattery nominal capacity4,2 kWhProtective classIAC wiring systemsSingle phase/N/PE, TN, TT, IT (additional fuse or CB required)Relative humidity - min5 %C/D DC current - Max70 ANominal AC output current15.6 AStandby losses< 10WStorage temperature - min-10 °CDC battery voltage - min74.4 VOver voltage categoryOVC II (PV and Battery), OVC III (AC grid/load)PhaseSingle phaseOperating temperature - min0 °CRelative humidity - maxEfﬁciency (Battery to AC) - Max>90%Grid integrationDC and AC coupledNumber of MPPT Trackers2Noise level35 dB (indoor application)Rated MPP-voltage – min240 VMaterial coverPlasticNominal DC Operating Voltage – Min 100 VPower consumption3.6 kWOperating temperature - max30 °CHazard substance restrictionLead free, compliance with RoHS GP2Initial feeding voltage150 VProtocolHTTPAPIRESTMPPT efficiency> 99%Recommended PV power3 kWp - 7 kWpSolar DC switchYesNominal AC grid voltage230 V (Grid-Tie), 230 V ± 3 % (Off-Grid)DC battery voltage - max98.4 VEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All rights reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia35 A90 V< 3%AC Synchronized operation 50 Hz / 60 Hz ± 1 Hz 2000 m Standard550 VBattery voltage rating Total Harmonic Distortion (THD)Nominal frequencyAltitude Display Rated MPP-voltage – max。

Avery Dennison

颁布：2017年11月产品数据表艾利丹尼森® T-7000 和 W-7000 最大视觉性能 (MVP) 系列微棱镜反光射膜是一款优质产品，可提供您所需要的长距离卓越性能。

它质量高、耐用，微棱镜逆向反射材料上带有压敏性粘合剂。

T-7000 和 W-7000MVP 系列膜是一种全向微棱镜膜，内含大量排列在多个方向的微棱镜。

“各角度智能”型特点使每个标志都将从所有标志表面方向统一反射，为使用者提供机密保护。

特征：∙ 全方向∙ 微棱镜逆反射性能∙ 实践证明，应用于全球安全设备，具备长久使用寿命∙ 统一的昼间和夜间视觉效果加工信息：丝网印刷热转印溶剂喷墨打印温和/环保溶剂墨打印 UV 喷墨打印热模切平板标志切割滚筒压路机标志切割钢尺标志剪切应用：坚硬的永久和临时室外标志坚硬的工作区设备需要长距离逆向反射性能的安全设备* 参见第 5 页中的术语 ** 3 年使用寿命性能：ASTM D4956 VIII 型 CUAP 3A 型完整列表见第 2 页。

方向：全方向耐候性： 10年只能垂直曝光。

表面：高度光泽带微棱镜丙烯酸反光膜粘性：永久压敏性里层：聚丙烯膜打印与：TrafficJet™ Print System颁布：2017年11月产品数据表逆反射性：表 A ：12表格 B ：1MVP 系列膜超越表 A 和表 B 中的所有值。

MVP 系列膜同样超越下列规格说明中所有当前适用的要求：目前的要求，并确保产品符合该要求。

您的艾利丹尼森销售代表能在此方面给予您协助。

1R A =坎德拉 / 每英尺坎德拉 / 每平方英尺(cd/fc/ft 2)或坎德拉 / 每勒克斯 / 每平方米 (cd/lx/m 2)2根据 ASTM E810 进行测量3注意 0.1° 观察角是 ASTM D4956 中的“补充要求”。

它代表着长距离高速公路大约 900 英尺（275 米）乃至更远的视距。

颁布：2017年11月产品数据表颜色和规格限制：图形 A：昼间色 – CIE 色品图图形 B ：夜间颜色MVP 系列膜符合ASTM D4956 和 CUAP 当前白天和夜晚的颜色要求，且符合第 2 页所列的标准。

上海拿华电子 ADWA埃达华系列酸度氧化还原说明书

上海拿华电子科技有限公司ADWA埃达华系列酸度/氧化还原（含税公开报价）分类型号配件技术参数公开报价AD1030AD2002B/1 可填充玻璃pH电极，BNC接头和1米电缆，AD5006不锈钢温度探头和1米电缆，pH4.01，pH7.01和pH10.01校正缓冲溶液（20ml/袋），电极冲洗溶液，电极支架，12 Vdc电源适配器和用户手册。

3点校正；范围：－2.00～16.00pH，分辨率：0.01/0.001,精度：±0.01/±0.002；范围：±2000mV,分辨率：0.1～±999.9mV/1,精度：±0.2mV～±699.9mV/±0.5mV～±999.9mV/±2mV4858.00AD1040AD2002B/1 可填充玻璃pH电极，BNC接头和1米电缆，AD5006不锈钢温度探头和1米电缆，pH4.01，pH7.01和pH10.01校正缓冲溶液（20ml/袋），电极冲洗溶液，电极支架，12 Vdc电源适配器和用户手册。

3点校正；范围：－2.00～16.00pH，分辨率：0.01/0.001,精度：±0.01/±0.002；范围：±2000mV,分辨率：0.1～±999.9mV/1,精度：±0.2mV～±699.9mV/±0.5mV～999.9mV/±2mV；带GLP功能5690.00AD1000AD2002B/1 可填充玻璃pH电极，BNC接头和1米电缆，AD5006不锈钢温度探头和1米电缆，pH4.01，pH7.01和pH10.01校正缓冲溶液（20ml/袋），电极冲洗溶液，电极支架，12 Vdc电源适配器和用户手册。

6点校正；范围：－2.00～16.00pH，分辨率：0.01/0.001,精度：±0.01/±0.002；范围：±2000mV,分辨率：0.1～±999.9mV/1,精度：±0.2mV～±699.9mV/±0.5mV～±999.9mV/±2mV；带RS232/USB&GLP功能8465.00AD1200（离子浓度计）AD2002B/1 可填充玻璃pH电极，BNC接头和1米电缆，AD5006不锈钢温度探头和1米电缆，pH4.01，pH7.01和pH10.01校正缓冲溶液（20ml/袋），电极冲洗溶液，电极支架，12 Vdc电源适配器和用户手册。

伟肯变频器用户手册

伟肯变频器用户手册安装和运行前，请务必遵照如下的起动和运行快速指南操作，并依次完成其中11个操作步骤。

如有任何问题，请与当地经销商联系。

快速指南1. 检查产品是否与定单相符，见第3章。

2. 进行任何调试前，请仔细阅读第1章中的安全规程。

3. 进行机械安装前，请根据第5章的说明检查外部环境条件和变频器周边的最小间距。

4. 按第6章的说明检查电机电缆、主电源电缆、主电源熔断器的规格和电缆的连接情况。

5. 根据第5章中的安装说明进行安装。

6. 根据§6.1.1中的说明检查控制电缆规格及接地系统。

7. 根据第7章中的说明使用控制面板。

8. 所有的参数都有工厂设定的缺省值。

为了确保正确运行，请检查下列电机铭牌数据和参数组P2.1中相应的参数设置。

见§8.3.2。

• 电机额定电压P2.1.6• 电机额定频率P2.1.7• 电机额定转速P2.1.8• 电机额定电流P2.1.9• 电机功率因数P2.1.10所有的参数说明见多目标控制应用手册。

9. 阅读第８章，按照调试步骤进行操作。

10. 至此，可以开始使用Vacon NXL变频器了。

11. 在本手册的结尾，您会看到有关默认I/O，控制面板菜单，监控值，故障代码和基本参数的快速帮助。

违反上述操作步骤所造成的任何损失，Vacon Plc概不负责。

目录VACON NXL用户手册目录1 安全指导2 EU认证3 收货4 技术数据5 安装6 电缆和接线7 控制面板8 调试9 故障跟踪10 选件卡OPT－AA的描述11 选件卡OPT－AI的描述VACON NXL多目标控制应用手册vacon • 3Vacon China电话： +86-10-51280006 传真： +86-10-65813733 24小时支持热线： +86-137******** Email ：***************.cn关于VACON NXL 用户手册和多目标控制应用手册恭喜您选择了Vacon NXL 变频器所提供的平滑控制！用户手册将为您提供有关Vacon NXL 变频器的安装，调试和操作的必要信息。

Yokogawa Q7607 光脉冲测试设备说明书

When measurement made ten timesOptical input Optical output Optical Amplifier is unnecessary if the built-in option (OPT7607+10) is used.OptionsBuilt-in Optical Amplifier: OPT7607+10 Retrofit Optical Amplifier:OPT7607+10AAccessory (supplied with the system)Chirp MeasurementSoftware:PQ76000402-CDSeparately Sold AccessoriesFC connector adapter:A08161 SC connector adapter:A08162 ST connector adapter:A08163 Rack mount kit:EIA, with Front handles A02708JIS, with Front handles A02709EIA, without Front handles A02718JIS, without Front handles A02719 *1)At 23 ±5°C*2)P: optical average power*3)100 MHz as standard, 1 dB down*4)Total output of optical power5 Q7607-2E Jan. ‘03Please be sure to read the product manual thoroughly before using the products. Specifications may change without notification.SpecificationsFunctionsMeasurement principle:Using the conversion characteristicsbetween optical frequency and intensityin the built-in optical-fiber-type Mach-Zehnder interferometer, the instrumentconverts the dynamic chirp (opticalfrequency modulation) into a change inoptical power FM. By controlling thediscrimination point of the interferometer,FM is either added to or subtracted fromthe intensity IM of the optical input signal. Polarization compensation: Automatic polarization compensation bythe internal optical-fiber-type polarizationcontrollerBuilt-in optical amplifierwith automatic gainadjustment option(OPT7607+10): Available as an option, the Q7607 has abuilt-in optical amplifier with automaticgain adjustment.The optical output power is approx.0 dBm, regardless of the optical inputpower.Performance Specifications*1)Wavelengthmeasurement range:Q7607; 1510 to 1610 nmQ7607+10; 1530 to 1610 nmOptical input power range:-10 to 10 dBmFrequency conversionaccuracy:within ±15%FM demodulationcoefficient (50 G/10 G)*2):P x 0.021/GHz / P x 0.042/GHzFree Spectral Range(50 G/10 G):300 GHz ±15 GHz / 150 GHz ±15 GHz Demodulation bandwidth (50 G/10 G)*3):100 Hz to 100 GHz / 100 Hz to 50 GHz Deviation of demodulationfrequency (50 G/10 G):135 GHzpp or less / 65 GHzpp or less Insertion loss:Q7607; 13 dB or lessOptical output power:Q7607+10; -3 to 0 dBm*4)Input light polarizationcompensation:Automatically controlledInput/Output SpecificationsOptical input/output: FC/PC connector(changeable to SC or ST type)GPIB: In accordance with IEEE488-1978Optical remote interlock:BNC connector (for OPT7607+10/10A)General SpecificationsOperating environment:Ambient temperature; 0 to +40°CRelative humidity; 85% max.(no condensation)Storage environment:Ambient temperature; -20 to +60°CRelative humidity; 90% max.(no condensation)Power supply:AC100–120 V, AC220–240 V, 50/60 Hz,100 VA or lessAutomatic switching between the 100and 200 V systemsDimensions:Approx. 132 (H) x 424 (W) x 500 (D) mm(Approx. 5.2 (H) x 16.7 (W) x 19.7 (D) in.) Mass:13 kg (28.7 lbs) or lessBulletin No.Q7607-332E Jan. ‘03D©2002 ADVANTEST CORPORATIONPrinted in JapanADVANTEST CORPORATIONShinjuku-NS building, 4-1Nishi-Shinjuku 2-chomeShinjuku-ku, Tokyo 163-0880,JapanTel:+81-3-3342-7500Fax:+81-3-5322-7270http://www.advantest.co.jpNorth America, Canada, Mexico:Advantest America Measuring Solutions, Inc.Head Office258 Fernwood Avenue Edison, NJ 08837, U.S.A.Tel:+1-732-346-2600Fax:+1-732-346-2610/ProdServices/instr.htmSanta Clara Office3201 Scott Blvd., Santa Clara, CA 95054, U.S.A.Tel:+1-408-988-7700 Fax:+1-408-987-0688Europe:Rohde & SchwarzEngineering and Sales GmbHMühldorfstraße 15D-81671 München, Germany (P.O.B. 80 14 29D-81614 München, Germany) Tel:+49-89-4129-13711Fax:+49-89-4129-13723Korea:Advantest Korea Co., Ltd.16F, MIRAEWASARAM Bldg., 942-1, Daechi-Dong,Kangnam-ku, #135-280, Seoul,KoreaTel:+82-2-3452-7157Fax:+82-2-3452-0370China:Advantest (Suzhou) Co., Ltd.Shanghai Branch Office5F, No.46 Section FactoryBuilding, No.555 Gui Ping Road,Caohejing, Hi-Tech Area,Shanghai, China 200233Tel:+86-21-6485-2725Fax:+86-21-6485-2726Beijing Branch OfficeRoom 517, Beijing Fortune Bldg.,5 Dong San Huan Bei-Lu, Chan Yang District, Beijing, China 100004Tel:+86-10-6590-8170Fax:+86-10-6590-8175Taiwan:Advantest Taiwan Inc.No.1 Alley 17, Lane 62,Chung-Ho Street, Chu-Pei City, Hsin Chu Hsien, Taiwan R.O.C Tel:+886-3-5532111Fax:+886-3-5541168Singapore, Malaysia, Thailand, Indonesia,Philippines, Vietnam:Advantest (Singapore) Pte. Ltd.438A Alexandra Road, #08-03/06Alexandra Technopark Singapore 119967Tel:+65-6274-3100Fax:+65-6274-4055。

AUO(友达)液晶面板连接器型号清单--精电连接

面板尺寸
19 15 31.5 24 17 15.6 31.5 50 50 50 50 42 42 39 42 42 39 39 39 39 39 15 15.6 39 39 39 19 13.3 13.3 15.6 5 10.1 31.5 42 14 31.5 14
信号接口型号
FI-XB30SSL-HF15 3804-F20N-06R PF050-O51B-C20-C MSCKT2407P30HB FI-XB30SSLA-HF15 MSAK24025P40 FI-RE51S-HF FI-RE51S-HF FI-RE51S-HF FI-RE51S-HF 187059-5122 FI-RE51S-HF FI-RE51S-HF 187059-51221-1 FI-RE51S-HF 187059-51221 187059-51221-1 187059-51221-1 187059-51221 187059-51221 187059-51221 DF14B-20P-1.25H 20455-040E-12R 187059-51221-1 187059-51221-1 187059-51221 FI-XB30SSL-HF15 20455-030E-12 20455-30E-12 MSAK24025P40 FH26W-39S-0.3SHW 20474-040E-12 196225-60041 FI-RE51S-HF 20455-030E-12 PF050-O51B-C20-C 20455-030E-12
AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达） AUO(友达）

Motorola 3.5 kHz 产品说明书

RVN4126 3.59100-386-9100-386/T DEVICERVN41772-CD2-3.5MCS/MTSRVN41821-CD2-3.5XTS3000/SABER PORTABLE YES RKN4046KHVN9085 3.51-20 R NO HLN9359 PROG. STAND RVN4057 3.532 X 8 CODEPLUG NO3080385B23 & 5880385B30 MDVN4965 3.59100-WS/T CONFIG KITRVN4053 3.5ASTRO DIGITAL INTERFACE NO3080385B23RVN41842-CD RKN4046A (Portable) 2-3.5ASTRO PORTABLE /MOBILE YES3080369B73 or0180300B10 (Mobile) RVN41831-CD3080369B732-3.5ASTRO SPECTRA MOBILE YES(Low / Mid Power)0180300B10 (High Power) RVN4185CD ASTRO SPECTRA PLUS MOBILE NO MANY OPTIONS; SEESERVICE BRIEF#SB-MO-0101RVN4186CD ASTRO SPECTRA PLUS MANY OPTIONS;MOBILE/PORTABLE COMB SEE SERVICE BRIEF#SB-MO-0101RVN4154 3.5ASTROTAC 3000 COMPAR.3080385B23RVN5003 3.5ASTROTAC COMPARATORS NO3080399E31 Adpt.5880385B34RVN4083 3.5BSC II NO FKN5836ARVN4171 3.5C200RVN4029 3.5CENTRACOM SERIES II NO VARIOUS-SEE MANUAL6881121E49RVN4112 3.5COMMAND PLUS NORVN4149 3.5COMTEGRA YES3082056X02HVN6053CD CT250, 450, 450LS YES AAPMKN4004RVN4079 3.5DESKTRAC CONVENTIONAL YES3080070N01RVN4093 3.5DESKTRAC TRUNKED YES3080070N01RVN4091 3.5DGT 9000 DESKSET YES0180358A22RVN4114 3.5GLOBAL POSITIONING SYS.NO RKN4021AHVN8177 3.5GM/GR300/GR500/GR400M10/M120/130YES3080070N01RVN4159 3.5GP60 SERIES YES PMLN4074AHVN9128 3.5GP300 & GP350RVN4152 3.5GP350 AVSRVN4150 3.5GTX YES HKN9857 (Portable)3080070N01(Mobile) HVN9025CD HT CDM/MTX/EX SERIES YES AARKN4083/AARKN4081RiblessAARKN4075RIBLESS NON-USA RKN4074RVN4098H 3.5HT1000/JT1000-VISAR YES3080371E46(VISAR CONV)RVN4151 3.5HT1000 AVSRVN4098 3.5HT1000/ VISAR CONV’L.YES RKN4035B (HT1000) HVN9084 3.5i750YES HLN-9102ARVN4156 3.5LCS/LTS 2000YES HKN9857(Portable)3080070N01(Mobile) RVN4087 3.5LORAN C LOC. RECV’R.NO RKN4021ARVN4135 3.5M100/M200,M110,M400,R100 includesHVN9173,9177,9646,9774YES3080070N01RVN4023 3.5MARATRAC YES3080070N01RVN4019 3.5MAXTRAC CONVENTIONAL YES3080070N01RVN4139 3.5MAXTRAC LS YES3080070N01RVN4043 3.5MAXTRAC TRK DUPLEX YES3080070N01RVN4178CD MC SERIES, MC2000/2500DDN6124AW/DB25 CONNECTORDDN6367AW/DB9 CONNECTOR RVN41751-CD Rib to MIC connector 1-3.5MCS2000 RKN4062BRVN41131-3.5MCS2000RVN4011 3.5MCX1000YES3000056M01RVN4063 3.5MCX1000 MARINE YES3000056M01RVN4117 3.5MDC/RDLAP DEVICESRVN4105 3.5MOBILE PROG. TOOLRVN4119 3.5MOBITEX DEVICESRVN4128 3.5MPT1327-1200 SERIES YES SEE MANUALRVN4025 3.5MSF5000/PURC/ANALOG YES0180355A30RVN4077 3.5MSF5000/10000FLD YES0180355A30RVN4017K 3.5MT 1000YES RTK4205CRVN4148 3.5MTR 2000YES3082056X02RVN4140 3.5MTRI 2000NORVN41761-CD MTS2000, MT2000*, MTX8000, MTX90001-3.5*programmed by DOS which is included in the RVN4176RVN4131 3.5MTVA CODE PLUG FIXRVN4142 3.5MTVA DOCTOR YES3080070N01RVN4131 3.5MTVA3.EXERVN4013 3.5MTX800 & MTX800S YES RTK4205CRVN4097 1-CD MTX8000/MTX9000,MTS2000,MT2000*,* programmed by DOS which is included in the RVN4176HVN9067CD MTX850/MTX8250MTX950,MTX925RVN4138 3.5MTX-LS YES RKN4035DRVN4035 3.5MX 1000YES RTK4203CRVN4073 3.5MX 800YES RKN4006BHVN9395 P100, P200 LB, P50+, P210, P500, PR3000RVN4134 3.5P100 (HVN9175)P200 LB (HVN9794)P50+ (HVN9395)P210 (HVN9763)P500 (HVN9941)PR3000 (HVN9586)YES RTK4205HVN9852 3.5P110YES HKN9755A/REX1143 HVN9262 3.5P200 UHF/VHF YES RTK4205RVN4129 3.5PDT220YVN4051 3.5PORTABLE REPEATER Portable rptr.P1820/P1821AXRVN4061C 3.5PP 1000/500NO3080385B23 & 5880385B30 RVN5002 3.5QUANTAR/QUANTRO NO3O80369E31RVN4135 3.5R100 (HVN9177)M100/M200/M110/M400YES0180358A52RVN4146 3.5RPM500/660RVN4002 3.5SABER YES RTK4203CRVN4131 3.5SETTLET.EXEHVN9007 3.5SM50 & SM120YESRVN4039 3.5SMART STATUS YES FKN5825AHVN9054 3.5SOFTWARE R03.2 P1225YES3080070N01HVN9001 3.5SOFTWARE R05.00.00 1225LS YES HLN9359AHVN9012 3.5SP50RVN4001N 3.5SPECTRA YES3080369B73 (STANDARD)0180300B10 (HIGH POWER) RVN4099 3.5SPECTRA RAILROAD YES3080369B73RVN4110 3.5STATION ACCESS MODULE NO3080369E31RVN4089A 3.5STX TRANSIT YES0180357A54RVN4051 3.5SYSTEMS SABER YES RTK4203BRVN4075 3.5T5600/T5620 SERIES NO3080385B23HVN9060CD TC3000, TS3000, TR3000RVN4123 3.5VISAR PRIVACY PLUS YES3080371E46FVN4333 3.5VRM 100 TOOLBOX FKN4486A CABLE &ADAPTORRVN4133 3.5VRM 500/600/650/850NORVN4181CD XTS 2500/5000 PORTABLES RKN4105A/RKN4106A RVN41002- 3.5XTS3000 ASTRO PORTABLE/MOBILERVN4170 3.5XTS3500YES RKN4035DRIB SET UPRLN4008E RADIO INTERFACE BOX (RIB)0180357A57RIB AC POWER PACK 120V0180358A56RIB AC POWER PACK 220V3080369B71IBM TO RIB CABLE (25 PIN) (USE WITH XT & PS2)3080369B72IBM TO RIB CABLE (9 PIN)RLN443825 PIN (F) TO 9 PIN (M) ADAPTOR (USE W/3080369B72 FOR AT APPLICATION) 5880385B308 PIN MODULAR TO 25 PIN ”D” ADAPTOR (FOR T5600 ONLY)0180359A29DUPLEX ADAPTOR (MOSTAR/TRAXAR TRNK’D ONLY)Item Disk Radio RIB Cable Number Size Product Required Number Item Disk Radio RIB Cable Number Size Product Required NumberUtilizing your personal computer, Radio Service Software (RSS)/Customer Programming Software (CPS)/CustomerConfiguration Software (CCS) enables you to add or reprogram features/parameters as your requirements change. RSS/CPS/CCS is compatible with IBM XT, AT, PS/2 models 30, 50, 60 and 80.Requires 640K RAM. DOS 3.1 or later. Consult the RSS users guide for the computer configuration and DOS requirements. (ForHT1000, MT/MTS2000, MTX838/8000/9000, Visar and some newer products —IBM model 386, 4 MEG RAM and DOS 5.0 or higher are recommended.) A Radio Interface Box (RIB) may be required as well as the appropriate cables. The RIB and cables must be ordered separately.Licensing:A license is required before a software (RVN) order is placed. The software license is site specific (customer number and ultimate destination tag). All sites/locations must purchase their own software.Be sure to place subsequent orders using the original customer number and ship-to-tag or other licensed sites; ordering software without a licensed customer number and ultimate tag may result in unnecessary delays. To obtain a no charge license agreement kit, order RPX4719. To place an order in the U.S. call 1-800-422-4210. Outside the U.S., FAX 847-576-3023.Subscription Program:The purchase of Radio ServiceSoftware/Customer Programming/Customer ConfigurationSoftware (RVN & HVN kits) entitles the buyer/subscriber to three years of free upgrades. At the end of these three years, the sub-scriber must purchase the same Radio Service Software kit to receive an additional three years of free upgrades. If the sub-scriber does not elect to purchase the same Radio Service Software kit, no upgrades will be sent. Annually a subscription status report is mailed to inform subscribers of the RSS/CPS/CCS items on our database and their expiration dates.Notes:1)A subscription service is offered on “RVN”-Radio Service Software/Customer Programming/Customer Configuration Software kits only.2)“RVN” software must only be procured through Radio Products and Services Division (RPSD). Software not procured through the RPSD will not be recorded on the subscription database; upgrades will not be mailed.3)Upgrades are mailed to the original buyer (customer number & ultimate tag).4)SP software is available through the radio product groups.The Motorola General Radio Service Software Agreement is now available on Motorola Online. If you need assistance please feel free to submit a “Contact Us” or call 800-422-4210.SMART RIB SET UPRLN1015D SMART RIB0180302E27 AC POWER PACK 120V 2580373E86 AC POWER PACK 220V3080390B49SMARTRIB CABLE (9 PIN (F) TO 9 PIN (M) (USE WITH AT)3080390B48SMARTRIB CABLE (25 PIN (F) TO 9 PIN (M) (USE WITH XT)RLN4488ASMART RIB BATTERY PACKWIRELESS DATA GROUP PRODUTS SOFTWARERVN4126 3.59100-386/9100T DEVICES MDVN4965 3.59100-WS/T CONFIG’TN RVN41173.5MDC/RDLAP DEVICESPAGING PRODUCTS MANUALS6881011B54 3.5ADVISOR6881029B90 3.5ADVISOR ELITE 6881023B20 3.5ADVISOR GOLD 6881020B35 3.5ADVISOR PRO FLX 6881032B30 3.5BR8506881032B30 3.5LS3506881032B30 3.5LS5506881032B30 3.5LS7506881033B10 3.5LS9506881035B20 3.5MINITOR III8262947A15 3.5PAGEWRITER 20008262947A15 3.5PAGEWRITER 2000X 6881028B10 3.5TALKABOUT T3406881029B35 3.5TIMEPORT P7308262947A15 3.5TIMEPORT P930NLN3548BUNIVERSAL INTERFACE KITItem Disk Radio NumberSize Product。

Eaton 中高压封闭型开关产品选择指南说明书

Volume 3—Power Distribution and Control Assemblies CA08100004E—March V3-T6-16Medium Voltage Metal-Enclosed SwitchesOutdoor Medium Voltage Switch6.1IntroductionProduct Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V3-T6-26.2Medium Voltage Switch—MVSProduct Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-3Application Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-3Features, Benefits and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-4Standards and Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-4Reference Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-4Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-4Technical Data and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .V3-T6-46.3Medium Voltage Switch and Breaker—MSBProduct Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-5Application Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-5Features, Benefits and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-5Standards and Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-6Reference Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-6Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-6Technical Data and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .V3-T6-66.4Metal-Enclosed Breaker—MEBProduct Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-7Application Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-7Features, Benefits and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-7Standards and Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-8Reference Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-8Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-8Technical Data and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .V3-T6-86.5Unitized Power Centers—UPCProduct Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-9Features, Benefits and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-9Standards and Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-9Reference Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-9Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-9Technical Data and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .V3-T6-106.6OEM Medium Voltage Switch Components—MVS-CProduct Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-11Application Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-11Features, Benefits and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-11Standards and Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-12Reference Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-12Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T6-12Technical Data and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .V3-T6-1266.1Medium Voltage Metal-Enclosed SwitchesIntroductionOutdoor Medium Voltage SwitchContentsDescriptionIntroductionAn EatonGreen SolutionIntroductionProduct Selection GuideProduct Offering Chart—Metal-Enclosed 1Notes1Additional products not shown include medium voltage transfer, high resistance ground and low profile switchgear.2Listings are voltage dependant. See individual product sheets for detail.Description MVS MEB MSB UPC Mini-MVSVoltage5, 15, 27, 38 kV5, 15 kV5, 15 kV5, 15 kV 5 kV onlyOperation duty cycle Low High High Low LowEnclosure Indoor, outdoor aisleless Indoor, outdoor aisleless Indoor, outdoor aisleless Indoor only Indoor, outdoor aisleless Listed UL®, CSA®———UL, CSAAssembly standards ANSI/IEEE®, C37.30.3, C37.20.4,C37.22, C37.57, C37.58,CSA 22.2 #31 2ANSI/IEEE, C37.30.3, C37.20.4,C37.22, C37.57, C37.58,CSA 22.2 #31ANSI/IEEE, C37.30.3, C37.20.4,C37.22, C37.57, C37.58,CSA 22.2 #31—ANSI/IEEE, C37.30.3, C37.20.4,C37.22, C37.57, C37.58,CSA 22.2 #31 2Circuit breaker type N/A VCP-W VCP-TR (5, 15 kV), VCP-W 27 kV N/A N/ACircuit breaker mounted N/A Drawout Fixed N/A N/ASeismically rated Zone 4 toCalifornia Building Code Title 24Yes Yes Yes Yes YesBIL ratings60 kV (5 kV)60 kV (5 kV)60 kV (5 kV)60 kV (5 kV)60 kV (5 kV)95 kV (15 kV)95 kV (15 kV)95 kV (15 kV)95 kV (15 kV)125 kV (27 kV)125 kV (27 kV)150 kV (38 kV)Main bus ratings800, 1200A (5/15/27/38 kV)800, 1200A (5/15 kV)800, 1200A (5/15/27 kV)N/A N/A, cable in, cable out application Breaker ratings N/A1200A (5/15 kV)600, 800, 1200A (5/15/27 kV)N/A N/AOvercurrent protective device Yes (fused)Yes Yes Yes (fused)Yes (fused)Short-circuitinterrupting capacityPer fuse IC29, 41, 63 kA (5 kV)16, 20, 25, 40 kA (5/15 kV)Per fuse IC Per fuse IC18, 28, 37, 63 kA (15 kV)25 kA (27 kV)Conduit entry Top or bottom Top or bottom Top or bottom Top or bottom Top or bottomV3-T6-2Volume 3—Power Distribution and Control Assemblies CA08100004E—March Volume 3—Power Distribution and Control Assemblies CA08100004E—March V3-T6-366.2Medium Voltage Metal-Enclosed SwitchesMedium Voltage Switch—MVSIndoor Medium Voltage Switch—MVS Bus Connection toDry-Type TransformerContentsDescriptionPage Medium Voltage Switch—MVSProduct Description . . . . . . . . . . . . . . . . . . . . . V3-T6-3Features, Benefits and Functions. . . . . . . . . . . V3-T6-4Standards and Certifications . . . . . . . . . . . . . . V3-T6-4Reference Information . . . . . . . . . . . . . . . . . . V3-T6-4Product Selection . . . . . . . . . . . . . . . . . . . . . . V3-T6-4Technical Data and Specifications . . . . . . . . . .V3-T6-4An EatonGreen SolutionProduct DescriptionEaton’s MVS load interrupter switchgear is a metal-enclosed assembly consisting of a switch, bus and fuses.MVS switchgear is available in one or more vertical section assemblies. The three-pole switch willinterrupt its rated load current with its quick-make, quick-break mechanism. Optional fuses ensure short-circuit protection at all times.MVS Arc-ResistantEaton’s 5/15 kV MVS metal-enclosed load interrupter switchgear is now available with arc-resistant construction withaccessibility Type 2B in accordance with IEEEC37.20.7. MVS arc-resistant switchgear is designed for indoor use. It can also be used outdoor with space heaters. It can be configured for a variety of applications. Switches can be supplied with manual or electrical operating mechanisms and with or without primaryfuses. Per IEEE C37.20.7, the Type 2B accessibility rating provides arc-resistantfeatures and protection at the freely accessible exterior (front, back and sides) of the equipment as well as in front of the instrument/control compartment with the instrument/controlcompartment door opened while the equipment is energized and operating normally.Application DescriptionMVS switchgear provides safe, reliable switching and fault protection for medium voltage circuits where high duty cycle operation is not needed.●Single switch and transformer primary ●Duplex switch ●Selector switch●Automatic transfer control66.2Medium Voltage Metal-Enclosed SwitchesMedium Voltage Switch—MVSFeatures, Benefits and FunctionsQuick-make, quick-breakmechanism: A reliable heavy-duty coil spring mechanismdrives the switch blades athigh speed into either theopen or the closed position.The speed of operation isindependent of the personoperating the switch.Direct drive mechanism:A metal-to-metal direct drivemechanism eliminates chainsor cables that may break orneed adjusting.DE-ION® arc interruption:DE-ION arc chambers andspring-loaded auxiliary bladesensure fast load currentinterruption and eliminatearcing damage to themain contacts.Positive switch positionindication: Red and greenmultilingual (English/Spanish/French) labels located directlyon the switch operatingmechanism give visualindication of switch position.Interlocked for safety:Mechanical interlocks preventclosing the switch when thecompartment door is open, orthe opening of the door whenthe switch is closed.Safety under faultconditions: The switch,depending upon the ratedvoltage, is available withthree or four fault-closingoperations with ratingsup to 61,000 amperes rmsasymmetrical, exceedingthe industry standards onetime operation.Safety barrier: A hingedsolid metal barrier with aperforated metal viewing areashields the disconnect switchwhen the compartment dooris opened.Short-circuit protection:A full range of Eaton fusingoptions is available for short-circuit protection.Eaton's SF6-freeswitchgear: Eaton mediumvoltage switchgear usevacuum switches combinedwith solid insulation material.This environmentally-friendlytechnology avoids the use ofSF6 as an insulation gas.Indoor Medium Voltage Switch—MVS Bus Connection toDry-T ype T ransformerInspectionWindowSwitch DriveMechanismOperatingHandle(Mounted inAccess Door)DE-ION ArcInterruptersLocated BehindSwitch BarrierInterlockFusesHigh DielectricInsulation UsedBetween SwitchPhases andGround on15 kV OnlyHinged InternalSwitch BarrierStandards andCertificationsMVS switchgear meets orexceeds IEEE® C37.20.3 as itapplies to metal-enclosedswitchgear.Either UnderwritersLaboratories® (UL) orCanadian StandardsAssociation® (CSA) listing isavailable for MVS switchgear inmany configurations, with anumber of options.MVS switchgear is availableseismically qualified to meetthe requirements of theUniform Building Code®(UBC), California Title 24 andBOCA® requirements in manyconfigurations with a numberof options.Reference InformationSee Consulting ApplicationGuide for detailed list of ratingsand options. For renewal parts,see CA08105001E.Product SelectionContact Eaton for pricing.Technical Dataand Specifications●Rated maximum voltageclasses of 5, 15, 27 and38 kV●Rated impulse levels, kVBIL: 60, 95, 125, 150●Continuous and load-breakratings: 600 amperesavailable at all voltageclasses; 1200 amperesavailable at 5 and 15 kV●Designs available in indoorand outdoor non-walk-inconfigurations●Manual or motor operatedV3-T6-4Volume 3—Power Distribution and Control Assemblies CA08100004E—March Volume 3—Power Distribution and Control Assemblies CA08100004E—March V3-T6-566.3Medium Voltage Metal-Enclosed SwitchesMedium Voltage Switch and Breaker—MSBIndoor Medium Voltage Switch and Fixed Breaker—MSBContentsDescriptionPage Medium Voltage Switch and Breaker—MSBStandards and Certifications . . . . . . . . . . . . . . V3-T6-6Reference Information . . . . . . . . . . . . . . . . . . . V3-T6-6Product Selection . . . . . . . . . . . . . . . . . . . . . . V3-T6-6Technical Data and Specifications . . . . . . . . . .V3-T6-6An EatonGreen SolutionProduct DescriptionEaton’s MSB switchgear is an integrated assembly of a visible load-break disconnect switch, fixed-mounted vacuum circuit breaker, and control devices that are integrated electrically and mechanically for circuit protection. All major components are manufactured by Eaton, establishing one source of responsibility for the equipment and ensuring high standards in quality, coordination, reliability and service. MSB switchgear would typically be used where both cost and protection are important design parameters.Application DescriptionApplications include ground fault protection, primary and/or secondary switching, and protection on unit substations, automatic transfer switching at medium voltage levels, capacitor switching, high duty cycle and tight system coordination protection.MSB switchgear can also be an economic benefit in single-ended substations because it may allow the customer to eliminate the secondary main protection and switching device.●Low resistance ground schemes●Single-ended substation designs●Overcurrent protectionFeatures, Benefits and Functions●Visible isolation●Fully rated fixed vacuum circuit breaker●Electrical operation ●No fuses●Improved coordination capability●Improved transformer protection●Ground fault protection ●Capacitor switching●High switching duty cycle ●Integral overcurrent protectionEaton's SF 6-freeswitchgear: Eaton medium voltage switchgear usevacuum switches combined with solid insulation material. This environmentally-friendly technology avoids the use of SF 6 as an insulation gas.66.3Medium Voltage Metal-Enclosed SwitchesMedium Voltage Switch and Breaker—MSBStandards andCertificationsMSB switchgear meets orexceeds IEEE C37.20.3 as itapplies to metal-enclosedswitchgear.CSA listing is available forMSB switchgear in manyconfigurations with a numberof options.MSB switchgear is availableseismically qualified to meetthe requirements of theUniform Building Code,California Title 24 andBOCA requirements inmany configurations witha number of options.Reference InformationSee Consulting ApplicationGuide for detailed list of ratingsand options. For renewal parts,see CA08105001E.Product SelectionContact Eaton for pricing.Technical Dataand Specifications●Rated maximum voltagesof 4.76–15 kV●Continuous current ratingsup to 1200 amperes●25 and 40 kA rmssymmetrical short-circuitinterrupting capacity●Designs available in indoorand outdoor non-walk-inconfigurations●Single vertical section andtransformer primaryconfigurations●Lineups consisting of MSBand MVS vertical sectionsV3-T6-6Volume 3—Power Distribution and Control Assemblies CA08100004E—March Volume 3—Power Distribution and Control Assemblies CA08100004E—March V3-T6-766.4Medium Voltage Metal-Enclosed SwitchesMetal-Enclosed Breaker—MEBIndoor Metal-Enclosed Drawout Vacuum Breaker—MEBUsed as Main for Two Fused SwitchesContentsDescriptionPage Metal-Enclosed Breaker—MEBStandards and Certifications . . . . . . . . . . . . . . V3-T6-8Reference Information . . . . . . . . . . . . . . . . . . . V3-T6-8Product Selection . . . . . . . . . . . . . . . . . . . . . . V3-T6-8Technical Data and Specifications . . . . . . . . . .V3-T6-8Product DescriptionEaton’s MEB switchgear is a metal-enclosed assembly of single high drawout VCP-W vacuum circuit breakers and control devices that are integrated electrically for circuit protection. (For drawout vacuum breaker metal-clad switchgear, type VacClad-W, see Volume 3, T ab 7) All major components are manufactured by Eaton, establishing one source of responsibility for the equipment and ensuring high standards in quality, coordination, reliability and service.Application DescriptionMEB can be applied as the primary main device and integrated with fused feeder switches in a lineup of fused MVS switchgear.Applications include ground fault protection, primary and/or secondary switching, and protection on unit substations, automatictransfer switching at medium voltage levels, capacitor switching, high duty cycle and tight system coordination protection. MEB switchgear can also be an economic benefit in single-ended substations because it may allow the customer to eliminate the secondary main protection and switching device.●Low resistance ground schemes●Single-ended substation designs●Overcurrent protectionFeatures, Benefits and Functions●Fully rated drawout vacuum circuit breaker ●Electrical operation ●Improved coordination capability●Improved transformer protection●Ground fault protection ●Capacitor switching●High switching duty cycle ●Integral overcurrent protection66.4Medium Voltage Metal-Enclosed SwitchesMetal-Enclosed Breaker—MEBStandards andCertificationsMEB switchgear meets orexceeds IEEE C37.20.3 as itapplies to metal-enclosedswitchgear.CSA listing is available forMEB switchgear in manyconfigurations with a numberof options.MEB switchgear is availableseismically qualified to meetthe requirements of theUniform Building Code,California Title 24 andBOCA requirements inmany configurations witha number of options.Reference InformationSee Consulting ApplicationGuide for detailed list of ratingsand options. For renewal parts,see CA08105001E.Product SelectionContact Eaton for pricing.Technical Dataand Specifications●Rated maximum voltagesof 4.76 and 15 kV●Continuous current ratingof 1200 or 2000 amperes●Short-circuit currentratings up to 38 kA rmssymmetrical●Designs available in indoorand outdoor non-walk-inconfigurations●Single vertical section andtransformer primaryconfigurations●Lineups consisting ofMEB vertical sections andMVS vertical sectionsV3-T6-8Volume 3—Power Distribution and Control Assemblies CA08100004E—March Volume 3—Power Distribution and Control Assemblies CA08100004E—March V3-T6-966.5Medium Voltage Metal-Enclosed SwitchesUnitized Power Centers—UPCBottom Cable Entry and Top Cable EntryIndoor Unitized Power CentersContentsDescriptionPage Unitized Power Centers—UPCTechnical Data and Specifications . . . . . . . . . .V3-T6-10Product DescriptionEaton’s Unitized Power Centers combine an MVS primary disconnect switch, a ventilated dry-typetransformer and Pow-R-Line 4 secondary distribution devices in a compact,factory-assembled integral unit. These self-contained units provide maximum kVA in minimum space, and their unitized construction simplifies installation. Other advantages include:●Front accessibility●Against-the-wall mounting ●Dimensions consistent with standard doorways ●Liberal space for primary and secondary cables ●Molded case circuitbreaker or fusible switch secondary distributionFeatures, Benefits and FunctionsThe primary disconnect switch is a manually operated, two-position, quick-make, quick-break type MVS. Distribution class surge arresters protect the transformer from surgevoltages, and current limiting fuses protect against fault currents. Insulated cable passes through a steelbarrier to connect the switch to the transformer.The power transformer is of a ventilated, dry-type, core-form construction. Standard Class 220°C insulation allows normal operation at 150°C temperature rise above a 30°C nominal ambient and a 40°C peak ambient. The secondary distribution section consists of group mounted Series C ® molded case circuit breakers or FDP-W fusible switches separated from the transformer by steel barriers. Additional vertical sections may be added for additional low voltage distribution.Standards and CertificationsPower transformer core and coil assemblies meet allapplicable IEEE/ANSI/NEMA ® standards.Reference InformationSee Consulting Application Guide for detailed list of ratings and options.Product SelectionContact Eaton for pricing.66.5Medium Voltage Metal-Enclosed SwitchesUnitized Power Centers—UPCTechnical Data and Specifications●Indoor enclosure only●Maximum primaryvoltages:● 3 kV through 15 kV●Three-phase, 60 Hz,delta primary●Primary BIL:●Voltages not exceeding2.5 kV maximum—20 kV BIL●Voltages above 2.5 kVup to 7.2 kV maximum—30 kV BIL●Voltages above 7.2 kV upto 15 kV maximum—60 kV BIL●Transformer:●12.5–1000 kVA●Winding material,copper type,ventilated dry●Insulation:●Class H 220°C rise(standard)●150°C, 115ºC and 80°Crise available●Fan cooling availableto increase kVA ratingby 331/3%●Taps: ±(2) 2.5% FCANand FCBN●Secondary voltages:●208Y/120 volts—four-wire●240 volts—three-wire●480Y/277 volts—four-wire●575 volts—four-wire●Secondary BIL: 10 kV BILV3-T6-10Volume 3—Power Distribution and Control Assemblies CA08100004E—March Volume 3—Power Distribution and Control Assemblies CA08100004E—March V3-T6-1166.6Medium Voltage Metal-Enclosed SwitchesOEM Medium Voltage Switch Components—MVS-CMVS-C SwitchOEM Fusible SwitchesContentsDescriptionPage OEM Medium Voltage Switch Components—MVS-C Standards and Certifications . . . . . . . . . . . . . . V3-T6-12Reference Information . . . . . . . . . . . . . . . . . . V3-T6-12Product Selection . . . . . . . . . . . . . . . . . . . . . . V3-T6-12Technical Data and Specifications . . . . . . . . . .V3-T6-12Product DescriptionMVS-C switches are open frame switches that must be mounted in a suitable enclosure for the OEMmarket. Eaton’s MVS-C load interrupter switches are available in many ratings. When properly applied, they will provide safe, low-cost switching where occasional or infrequent disconnecting means is desired. The three-pole switch, with its quick-make, quick-break mechanism, will interrupt its rated load current.Application DescriptionMVS-C switches can beapplied in suitable enclosures for many switching duties whether manual or automatic operation is specified:●Transformer primary switching●Transformer secondary switching●Power distribution switchingFeatures, Benefits and FunctionsPlug & Play ™: The switch and operating mechanism install as a single entity. No handle and chains or cables to mount and adjust. Improves productivity in assembly reducing overall cost.Quick-make, quick-break mechanism: A reliable heavy-duty coil spring mechanism drives the switch blades at high speed into either the open or the closed position.DE-ION arc interruption: DE-ION arc chambers and spring-loaded auxiliary blades ensure safe, fast load current interruption and eliminate arcing damage to the main contacts.Positive switch position indication: Red and Green multilingual (English/Spanish/French) labels located directly on the switch operating mechanism give visual indication of switch position.Interlocked for safety: When properly installed to utilize the built-in designfeature, mechanical interlocks prevent closing the switch when the enclosure door is open, or opening the door when the switch is closed. As an alternate interlock method, key interlock provisions are included.Safety under faultconditions: The switch, depending upon the rated voltage, is available with three or four fault-closing operations with ratings up to 61,000 amperes rms asymmetrical, exceeding the industry standards one-time operation.Fuse mountings: Complete three-phase fuse mounting assemblies or fuse live parts are available that are fully compatible with MVS-C switches. The fuse mountings are intended for use with Eaton’s fuses.MVS-C Fuse MountingDirect drive mechanism: A metal-to-metal direct drive mechanism eliminates chains or cables that need adjusting or break.66.6Medium Voltage Metal-Enclosed SwitchesOEM Medium Voltage Switch Components—MVS-CStandards andCertifications●MVS-C switches meet orexceed ANSI C37.22ratings●UL and CSA recognizedcomponent listing servicesare available for 5 and15 kV manual and motoroperated MVS-C switchesReference InformationFor renewal parts, seeCA08105001E.Product SelectionContact Eaton for pricing.Technical Dataand Specifications●Rated maximum voltageclasses of 5, 15, 27 and38 kV●Rated impulse levels, kVBIL: 60, 95, 125, 150●Continuous and load-breakratings: 600 amperesavailable at all voltageclasses; 1200 amperesavailable at 5 and 15 kV●Rated momentary and faultclose currents, 40 and61 kA rms asymmetrical;40 kA available at all voltageclasses; 61 kA available at5, 15 and 27 kV●Manual, motor or shunt-tripoperatedV3-T6-12Volume 3—Power Distribution and Control Assemblies CA08100004E—March 。

阿尔法冷 Core Hurrican 360mm 硬管冷却套件说明书

With the Core Hurrican HardTube water cooling kit, Alphacool providesall the components needed to get started in the world of water cooling.The set is aimed not only at beginners, but also at enthusiasts. Theselected components are optimally matched and come from Alphacool's DIY program. The choice of materials is stilluncompromisingly based on copper or brass for all metals in order toguarantee performance-oriented CPU cooling.•Water cooling set for starters & enthusiasts •Performance-oriented water cooling with digital aRGB illumination •Optimally matched components from Alphacools DIY rangeIntel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5V. 1.001 // 11.2022Alphacool Core Hurrican 360mm XT45 HardTube water cooling SetAlphacool article number: 119931x Eisblock XPX Aurora Edge CPU Cooler6x Fitting Eiszapfen Pro 16mm G1/4"2x Fitting Eiszapfen L - Connector G1/4"1x Eisbecher Aurora D5 Acetal/Glas - 250mm 1x VPP Apex pump1x aRGB Controller Aurora Eiscontrol2x Digital RGB LED Y-splitter 3-times cable 1x PWM to 3x PWM connector cable1x ATX 24-pin jumper plug 1x NexXxoS XT45 Full Copper 360mm Radiator V.2 3x Rise Aurora 120mm Fan (120x120x25mm)1x HardTube Eisrohr 16/13mm PETG 60cm - 4pcs 1x Pit saw1x Tubing Pipe Reamer1x Double Bending Tool1x Silicon Bending Insert 100cm1x Liquid Clear 1000ml1x Filling bottleWith the Core Hurrican HardTube water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling.Eisblock XPX Aurora Edge CPU CoolerAlphacool's Eisblock XPX Aurora Edge CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRG B LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel.Eisbecher Aurora D5 250mm & VPP Apex PumpThe Alphacool Eisbecher Aurora glass reservoir uses a real glass tube rather than the usual plastic tube that Alphacool usually relies on. The embedded 5V digital RGB LED ring and the new design makes the reservoir look magnificent. Of course, the Lighttower water effect is used again. The mounting can be done via feet but also mounted on 120 or 140mm fan mounts or even directly to a radiator. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. Via the 4-pin fan connector, the speed of the pump can be read and controlled via PWM signal. The Apex VPP is supplied with power via the SATA connector.NexXxoS XT45 Full Copper 360mm Radiator V.2All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS XT45 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop.Rise Aurora 120mm fansThe fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan.Eisrohr 16/13mm PETG HardTubeThe Alphacool Eisrohr PETG HardTube givse the user the possibility to create a very special look. With a wall thickness of 3 mm, the tubes are very strong, but can still be bent without great effort and they are easy to fit. The HardTubes are clear and will look great in almost every water cooling loop. When cutting the tubes, make sure to chamfer the edges with fine file or a hose deburrer, as sharp edges can damage the O-rings of fittings.Eiszapfen 16/13mm G1/4" ConnectionsAll the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off.Thermal Paste & CoolantThe included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal G rease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle.aRGB Controller, Cables, Tools & AccessoriesAll cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like filling bottle, deburrer and pit saw. Thus, the construction of the custom loop can be started "out-of-the-box" immediately.。

sn65hvd230中文用户手册

12 电源相关建议......................................................... 30 13 布局布线 ................................................................ 31
13.1 布局布线指南......................................................... 31 13.2 布局示例................................................................ 31 14 器件和文档支持 ..................................................... 32 14.1 相关链接................................................................ 32 14.2 商标 ....................................................................... 32 14.3 静电放电警告......................................................... 32 14.4 术语表 ................................................................... 32 15 机械、封装和可订购信息....................................... 32
Product Folder
Sample & Buy
Technical Documents

阿特斯面扫描设备联合分析低效片

NCell 0.019389 0.006601 0.057209
Urev1 -12 -12 -12
Irev1 12.30452 12.30602 7.208794
阿特斯面扫描设备联合分析低效片
测试分析
EL测试结果如下：
阿特斯面扫描设备联合分析低效片
测试分析
阿特斯面扫描设备联合分析低效片
测试分析
从EL加反向偏压测试HS可以看出，L4片边缘存在强漏电。SUNSVOC上来看，结区J01和J02均偏大，说明暗电流中的结区扩散和复合电流都比较大。与材料质量较大相关。L4片与上前面分析的7号片相类似，存在一定的过烧，同时边缘刻蚀不完全，使得暗电流更大。
阿特斯面扫描设备联合分析低效片
测试分析（第四组）
阿特斯面扫描设备联合分析低效片
测试分析
将电池片首先进行EL测试，加正向偏压，通10A电流，测试结果如下所示；从图中可以看出：与前面所示三片一样，电池片整体区域的EL较差，部分区域全黑，说明这些区域的整体发电效率低下。
阿特斯面扫描设备联合分析低效片
测试分析
EL测试机通过加反偏电压，测得Hot-Spot结果如下所示；从图中可以看出：7号片在较低的反偏下可以观察到绒丝处有亮点，与其暗电流偏大相吻合。说明在该片的多晶硅晶界处存在比较大的漏电。
Number L1 L2 L4
Uoc 0.596328 0.545516 0.604588
Isc 1.545166 1.091997 6.542916
Rs -0.61903 -1.30751 0.048157
Rsh 3.974022 2.641822 1.876622
FF 51.20265 26.96499 35.19066

德拉埃特荷尔达PQ引导SP IP65外壳 - 无显示说明书

SPECIFICATIONSvG UIDEPOWER QUALITY ANALYZERThe Best Combination of Value & Technologyin a PQ Analyzer – Safe, Powerful & Intelligent!Dranetz HDPQ® Guide SPIP65 Enclosure - No DisplayDranetz HDPQ® Guide7” Color, Touch DisplayMADE IN USAG UIDE®G UIDE SPMEASURED PARAMETERS(4) Differential Voltage: 16 bit resolution0-1000Vrms, AC/DC, ±0.1 % reading, <40V ±0.5%FSIEC 61000-4-30 Class A: 60-1000Vrms, ±0.1 % of Udin, range ofRange probe dep., AC/DC, +/- 0.1% reading +/- 0.05% FSFrequency:16-25Hz, 42.5-69Hz, +/- 0.01HzCALCULATED PARAMETERSPower/Energy - 1 Second samplingReal Power (W) - P: meets 0.2S requirements, range probe dep.Apparent Power (VA) - S: meets 0.2S requirements, range probe dep.Reactive Power (var) - Q: meets 0.2S requirements, range probe dep.Power Factor (W/VA) -”true” 1 to 0 to -1Displacement PF 1 to 0 to 1Demand (in W): meets 0.2S requirements, range probe dep.Energy (in Wh): meets 0.2S requirements, range probe dep.Distortion - 200ms, 3 sec, 10 min windowsVthd: 0-100%, +/- 5% for V>=1% Vnom,V Ind Harm: DC, 2-127, +/- 5% for V>=1% VnomIthd: 0-100%, +/- 5% for I>=1% Vnom,I Ind Harm: DC, 2-63, +/- 5% for I>=1% VnomMisc.Pst - 10 minutes: 0.2-10, +/- 0.05 @ Pst=1Plt - 2 hours: 0.2-10, +/- 0.05 @ Pst=1EASE OF USE FEATURESAutomatic SetupsPre-programmed monitoring modesAnswerModules®- Sag/Dip Directivity, PF Cap, MotorDashboards - PQ, Demand & EnergySimultaneous PQ, Demand & EnergyMini ReportSTANDARDS COMPLIANCEPower QualityIEC 61000-4-30 Class A: Edition 2 (2008)IEEE 1159: 2009STANDARDS COMPLIANCE (continued) PowerIEEE 1459: 2000HarmonicsIEC 61000-4-7 Class 1: Edition 2 (2008)IEEE 519: 2014Voltage FlickerIEC 61000-4-15: Edition 2 (2010)IEEE 1453: 2011Compliance/TestingEN 50160: 2010GENERAL SPECIFICATIONSDranetz HDPQ GuideSize: (10”w x 8”h x 2.75”d), (25.4cm x 20.3cm x 7.00cm)Weight: 4.2lbs, 2kgOperating temperature: 0 to 50 deg C (32 to 122 deg F)Storage temperature: -20 to 55 deg C (-4 to 122 deg F)Humidity: 10-90% non condensing3 hours run time on full charge, 3 hours charge timeDranetz HDPQ Guide SPSize: (11”w x 6.5”h x 2.5”d), (27.9cm x 16.5cm x 6.4cm)Weight: 3.2lbs, 1.45kgOperating temperature: -10 to 50 deg C (14 to 122 deg F)Storage temperature: -40 to 85 deg C (-40 to 185 deg F)Humidity: 0-95% non condensing15 minutes run time on full charge, 3 hours charge timeClock accuracy and resolutionInternal: +/- 1 sec/day at 25deg CNTP: +/-10 msecGPS: +/-1 msecAC Adapter: 90-264(max) 50/60HzMemory size: 4GBDisplay: 7” WVGA color graphic, Icon based touch LCD, LED Backlit(Guide only)Languages: English, German, Spanish, French, Italian, Swedish, Finn-ish, Polish, Chinese (traditional and simplified), Thai, KoreanCOMMUNICATIONSEthernet, 802.11 b/g/n WirelessUSB On the GoBluetooth via USB adapterVNC remote controlAndroid® & Apple® AppI12-RevAG UIDE SG UIDE SPEasle and Wire ManagementApplicationsWhether your applic ation requires power quality monitoring, demand/energy monitoring, or both, the powerful feature set of the Dranetz HDPQ® Guide family provides you the tools need-ed to get the job done. Dranetz HDPQ Guide instruments are perfec t for applic ations suc h as PQ surveys, fault rec ording, inrush, motor testing, harmonic analysis, advanced distortion analysis, demand/energy/load studies, and much more. The HDPQ Guide and Guide SP offer the exact same measure-ment features, but in different enc losures that c an meet the needs of a wide variety of applications and work environments. The HDPQ Guide is a portable instrument with a built in 7”, Tablet like LCD display. The same local user interface is also available remotely on a PC, Tablet or Smartphone by using the built in Ethernet or Wi-Fi c ommunic ations and Dran-View 7, or a free VNC remote control App. The HDPQ Guide SP offers the same measurement capabilities and communications, but is housed in an IP65 enclosure without an LCD display, greatly expanding applications into outdoor and harsh environments along with those where an LCD display is undesirable.Advan ced PQ & Energy Capabilities!Dranetz products have a long-standing tradition of having state of the art PQ monitoring capabilities, and the Dranetz HDPQ Guide is no exc eption. HDPQ Guide meets and exc eeds the most stringent industry monitoring standards, including:Power Quality - IEC 61000-4-30 Class A, IEEE 1159Harmonics - IEC 61000-4-7, IEEE 519Voltage Flicker - IEC 61000-4-15, IEEE 1453 – Including Pinst Advanced Energy – IEEE 1459Transient CaptureThe Dranetz HDPQ Guide goes well beyond the requirements of the PQ standards by including transient capture capabilities for voltage and current, such as: transients to 32 microseconds, peak sample transients, and advanced waveshape change tran-sients that can identify changes from cycle to cycle.AnswerModules ® – Smart & Good Looking!Only available from Dranetz, AnswerModules are algorithms that automatic ally identify power quality problems and their sourc e. These diagnostic and reporting tools are based on our decades of analytic al experienc e, benc hmarking, and troubleshooting work. The HDPQ Guide has three built in AnswerModules:Sag/Dip Directivity: Automatically identifies the source of a Sag/Dip as being up stream or downstream from the moni-toring source.Capacitor Switching: Automatically identifies transients as being Power Factor correction transients.Motor Analysis: Enables the PQ p arameters that are imp ortant to motor surveys, and provides a custom dashboard for results.G®The Best Combination of Value & Technology in a PQ Analyzer - Safe, Powerful & IntelligentPower Quality instruments are no different than anything else – you get what you pay for – you just get much more from the Dranetz HDPQ ® Guide than with any other instrument in its class!The Dranetz HDPQ ® Guide SP offers the same value, but in a hardened IP65 enclosure.Safe Remote Accessibility via Dran-View ® 7, Apps and VNCDON’T RISK YOUR SAFETY! The Dranetz HDPQ Guide comes with a standard Ethernet port, built-in Wireless, and USB Bluetooth commu-nications that allow you to easily comply with today’s arc flash and other safety standards. Simply install your HDPQ Guide, close the cabinet door, and use your Tablet, Smartphone, PC, or MAC computer to remotely control monitoring and review data. Fully control your instrument remotely, and see exactly what’s on the local 7” display by using Dranview 7 or a free VNC program or App for PC, MAC, Apple and Android devices. Or, you can also use the Dranetz HDPQ App for Apple and Android devices to remotely view a real-time dashboard, scope mode, or remotely configure the instrument using automatic setups. For local access, there’s also a built-in USB port to copy data to a USB drive or directly to your computer using a Plug-N-Play connection.Dashboard Display Demand & Energy TrendEasy to Use Intuitive User InterfaceWith their innovative packaging and 7” wide screen color touch display, the Dranetz HDPQ family of instruments are the most powerful and easiest to use power monitoring instruments available. Like your tablet computer, simply useyour finger or stylus to easily navigate the intuitive, icon-based user interface. Setting up the HDPQ Guide is made easy with automatic setups that detect the cir-cuit type, voltage, etc. and configure the instrument in seconds with typical indus-try settings. For customized setups, use the manual Wizard mode that guides you step-by-step through each setup. During monitoring, real time measurements can be viewed in many ways, including a color-coded reporting Dashboard, and meter/scope/phasor/harmonics displays. Recorded data can be viewed over time by using the timeline and event list displays, and also by using compliance reports, such as EN 50160.Demand & Energy SurveysManaging energy and reducing related expenses is always of par-amount importance, and in many cases is a corporate mandate. In addition to industry-best power quality monitoring capabilities, all of the Dranetz HDPQ family products also have extensive demand and energy monitoring capabilities for both long and short duration surveys. Unlike other lesser capable instru-ments, there’s more than enough horsepower to perform complete PQ and energy surveys simultaneously – it’s your choice to survey for PQ, Energy, or both. Seeing results is easy when using the energy and demand Dashboard reports that display real time and accumulated readings in a color-coded reporting format. There’s also a billing report that includes your energy rates, including time of use. You can also upload your data to our Dran-View 7 software for viewing, reporting, and printing via PC.Reporting & AnalysisThe Dranetz HDPQ Dashboard takes the guess work out of knowing what the instru-ment has recorded. The Dashboard is a color coded alarm panel with boxes that represent different event types (Sags, Swells, Transients, THD, etc.). Each box shows the real time me-tered values for the event type, and is color coded to indicate if events of that type have been recorded.Dran-View ® 7 is our industry leading Win-dows-based software program that enables power professionals to simply and quickly visualize and analyze power monitoring data. Dran-View enhances the Dranetz HDPQ Visa instruments with its VNC remote control, down-loading, and advanced analytical capabilities. It is successfully used by thousands of customers around the world, and has become the industry leading power management software tool. Dran-View is easy to use, yet adds tremendous value and power to our Dranetz HDPQ family of instruments. Of course Dran-View can trend and list data recorded by the instrument, but it also includes a built in report writer, allows you to embed pictures, provides mathematical analy-sis tools, and even includes a rescue kit to help correct connection mistakes.Dran-View ® 7Dranetz HDPQ Live VNC & DownloadDranetz HDPQ Guide SPIP65 Enclosure - No DisplayDranetz HDPQ GuidePortable with 7” DisplayV & I Connections• 1000V CAT III (600V CAT IV)• AC/DC Differential Voltage & Current Inputs • DRANFLEX CT’s powered by the instrumentInnovative Package & Wide Screen7” color, wide screen touch display. 40% largerthan before - the largest in the industry!G UIDE SG UIDE SP。

Vaisala WMT700系列风速传感器用户指南说明书

Order Form Valid from2022-02-11MASTERDOC221319-WChecked: AMPN / 2021-12-17Accepted: JGL / 2022-02-11Vaisala Ultrasonic Wind SensorWMT700WMT 7 01Measurement range40 m/s WMT701165 m/s WMT702275 m/s WMT703390 m/s WMT704440 m/s + Accredited Wind Calibration (WMT701)A65 m/s + Accredited Wind Calibration (WMT702)B75 m/s + Accredited Wind Calibration (WMT703)C90 m/s + Accredited Wind Calibration (WMT704)D2Temperature range-10...+60 C A-40...+60 C B-55...+70 C C3HeatingNon-heated version1Heated transducers2Heated transducers and arms3Heated transducers, arms and body44Digital communication interfaceRS-485 isolated ARS-422 isolated BRS-232 isolated CSDI-12 isolated D5Digital communication profileWMT70 - poll mode (default)9600b, 8, N, 1 Polled0WS425 - ASCII 2400b, 8, N, 1 Polled1WS425 - NMEA Extended(v 0183)9600b, 8, N, 1 Auto send 1/s2WS425 - SDI-12 (v 1.3)1200b, 7, E, 1 Polled3WS425 - ASOS 2400b, 8, N, 1 Polled4ROSA - MES12 9600b, 8, N, 1 Polled5US AWOS - NMEA Standard2400b, 8, N, 1 Autosend 5/s6FAA - Federal9600b, 8, N, 1 Polled7AWS520 - NMEA Extended(v 0183)4800b, 8, N, 1 Auto send 1/s8Low power mode for AWS3109600b, 8, N, 1 Polled9MARINE 1 - NMEA Extended(v 0183)4800b, 8, N, 1 Auto send 1/s AMARINE 2 - NMEA Standard(v 0183)4800b, 8, N, 1 Auto send 1/s B6Digital communication unitsm/s Aknots Bmph Ckm/h D7Analog output signals for wind speed channelDisabled0Voltage output100 mV/m/s1Current output 4...20 mA(0...Range m/s)3Current output0.2 mA/m/s4Push-Pull frequency output10 Hz/m/s6WS425 - voltage output8 mV/mph7WS425 - frequency output (Push-Pull) 5 Hz/mph8Pull up frequency output (PNP)10 Hz/m/s APull down frequency output (NPN)10 Hz/m/s B8Analog output signals for wind direction channelDisabled0Voltage output20 mV/Deg ACurrent output50 uA/Deg DCurrent output 4...20 mA44.444 uA/Deg EPotentiometer output (WS425)0...Vref (Vref = external reference voltage from system)F9CableNone1Cable 2 m, cable connector, open leads on one end WMT70Cable12Cable 10 m, cable connector, open leads on one end WMT70Cable23MAWS cable 10 m WMT70Cable34RS485 Cable 2 m, cable connector, open leads on one end WMT70Cable88RS485 Cable 10 m, cable connector, open leads on one end WMT70Cable99Junction Box with Cable 2meters WMT70Cable12DCable 15 m, cable connector, open leads on one end WMT70Cable13ECable 26 m, cable connector, open leads on one end WMT70Cable14FHybrid cable 2 m, cable connector, open leads on one end WMT70Cable15GHybrid cable 10 m, cable connector, open leads on one end WMT70Cable16HHybrid cable 15 m, cable connector, open leads on one end WMT70Cable17JHybrid cable 26 m, cable connector, open leads on one end WMT70Cable18K 10Mounting adapterAdapter 228869 only Standard adapter, no fix AAdapter 228869 with WMT70FIX70Standard adapter with general purpose fix BAdapter 228869 with WMT700FIX60-MARINE Marine adapter with stainless steel fix for 60 mm pole CAdapter 228869 with WMT700FIX60-RST Standard adapter with stainless steel fix for 60 mm pole DAdapter 228777 only (used for old WS425 FIX30/60)WS425 compatible adapter, no fix EAdapter 228777 with WS425FIX60WS425 compatible adapter with WS425FIX60FAdapter 228869 with ASM212140 (suitable for 4258057 mounting)ASOS mounting adapter GAdapter 228777 with WAC425 (suitable for inverted mounting)Adapter with sensor arm for 60mm pole HAdapter 228869 with ASM214411Standard adapter with stainless steel fix for 50 mm pole J 11Power - Reserved for furture purposesNone1 12AccessoriesNone ABird cage WMT70BirdKit B 13ManualNone1English2Japanese3Chinese4Russian5DEIF6French7Spanish8For freezing conditions select appropriate combination of heating and temperature ranges.AccessoriesTool Verifier WMT70VerifierBird Bird cage WMT70BirdKitBird perch WS425BirdPerchCable Cable 2 m, cable connector, open leads on one end227567SP Cable 10 m, cable connector, open leads on one end227568SPCable 15 m, cable connector, open leads on one end237890SPCable 26 m, cable connector, open leads on one end237889SPRS485 Cable 2 m, cable connector, open leads on one end228259SPRS485 Cable 10 m, cable connector, open leads on one end228260SPMAWS cable 10 m227565SPROSA analog cable 10 m, cable connector, open leads on one end231425SPAdapter cable for WS425 serial227569SPAdapter cable for WS425 analog frequency output227570SPJunction Box with Cable 2meters ASM210719SPWMT700 USB service cable240855Universal USB service cable with screw terminal for RS485 or RS232240884Hybrid cable 2 m, cable connector, open leads on one end CBL210706-2MSPHybrid cable 10 m, cable connector, open leads on one end CBL210706-10MSPHybrid cable 15 m, cable connector, open leads on one end CBL210706-15MSPHybrid cable 26 m, cable connector, open leads on one end CBL210706-26MSP Mounting WMT700 Mounting Accessories:Adapter for FIX70228869Fix70 (suitable also for inverted mounting)WMT70FixSPMounting adapter 60mm POM WMT700FIX60-POMSP Mounting adapter 60mm RST WMT700FIX60-RSTSP Cross-arm (40x40x850mm)WMT70CROSSARMMounting adapter between 228869 and 4258057ASM212140Mounting adapter 50mm RST ASM214411WS425 Mounting Accessories:Adapter for old WS425 FIX30/60228777FIX30WS425Fix30FIX60WS425Fix60Sensor support arm for 60mm pole (655mm with integrated fix for item 228777)WAC425Power Outdoor AC (mains) power supply for arm heated and fully heated WMT700PJB480Display Wind display XDi-N 144 (5’’ display) for ship navigation252307 Wind display XDi-N 192 (7’ display) for ship navigation252321。

扫特龙和曼维尔产品数据表705、706、710和726个人攻击发射器说明书

705, 706, 710 & 726 Personal attack transmittersWhy settle for less when your staffneed help most?Hopefully, your staff will never need to find out whyour personal attack transmitters are so highly regarded.But should they ever be attacked, they’ll quickly realisewhy over 750,000 people worldwide trust them withtheir lives. The 705, 706, 710 and 726 models all comewith 10mW transmitting power compared to the usual0.25mW. And, to ensure your transmitter is alwaysworking, the long-life lithium battery sends a signalwhen less than one month’s operation remains.All models are designed to prevent accidental activationand a variety of wearing options – hand-held, neckpendant or clip-on – means there’s a style to suiteveryone.With many other state-of-the-art features (see overleaf),no other range of personal attack transmitters is betterequipped to draw attention to a member of staff whenthey are under attack.• Reliable, secure Scantronic 868 MHz narrow-bandradio operation• Dual button operation• 2-channel version for alert (pre-warning) + alarmsignals• Extended and standard range options• Lithium battery-powered (supplied)At a glance...Tel: +44 (0)1594 545 400Fax: +44 (0)1594 545 401Email:***********************Web: EatonElectrical Sector EMEA Route de la Longeraie 71110 Morges, Switzerland EatonSecurity House,Vantage Point Business Village, Mitcheldean, Gloucestershire GL17 0SXScantronic and Menvier product datasheetCompatible productsProduct specification705rEUR-00706rEUR-00710rEUR-00726rEUR-50726rEUR-60Part number 710rEUR-00705rEUR-00706rEUR-00726rEUR-50726rEUR-60Description2 channel personal attack transmitter2 channel personal attack transmitter Double push lock, beltmounted, secondary tilit sensor “man down” channel Extended range, dualoperation personal attack transmitter Standard, dual operationpersonal attack transmitter Channels12 (alert + alarm)211Operating frequency868.6625MHz @ 20KHz bandwidth.CE tested to I-ETS 300 220868.6625MHz @ 20KHz bandwidth.CE tested to I-ETS 300 220868.6625MHz at 20kHz bandwidth. I-ETS 300 220868.6625MHz @ 20KHz bandwidth.CE tested to I-ETS 300 220868.6625MHz @ 20KHz bandwidth.CE tested to I-ETS 300 220T ransmission power 10mW 10mW 10mW 10mW 10mW Free space radio range >1000m >600m>900m> 1000m>600mPower supply (battery)3v CR2 Li 3.6v Li 1/2 AA Not user replaceble 3.6v Li 1/2 AA Not user replaceable 3.6v Li 1/2 AA Not user replaceble 3.6v Li 1/2 AA Not user replaceble T ypical battery life 3-5 years 3-5 years 3-5 years 3-5 years 3-5 years T emperature range -10 to +55 ˚C -10 to +55 ˚C -10 to +55 ˚C -10 to +55 ˚C -10 to +55 ˚C Dimensions 58 x 40 x 16mm 104 x 46 x 30mm 170 x 45 x 30mm (including aerial)163 x 46 x 30mm 104 x 46 x 30mm Weight 34gm 60gm 68gm 65gm 65gm Colour Dark GreyDark GreyDark GreyDark GreyDark GreyComplianceEN50131-2 Grade 2, EN61000-6-3:2001, environmental class ll PD6662:2004EN50131-2 Grade 2, EN61000-6-3:2001, environmental class ll PD6662:2004EN50131-2 Grade 2EN61000-6-3:2001environmental class II PD6662:2004EN50131-2 Grade 2, EN61000-6-3:2001, environmental class ll PD6662:2004EN50131-2 Grade 2, EN61000-6-3:2001, environmental class ll PD6662:2004Scantronic 9960rEUR-08 & 16 RFX receiver interfaces (not 705rEUR-00)i-on4040 zone control panel Scantronic Homelink 55 24zone radio alarm panel (not 705rEUR-00)i-on50EX 50 zone control panel Scantronic Homelink 75 32zone radio alarm system (not 705rEUR-00)i-on160EX 160 zone control panel Scantronic 762rEUR-00 2 channel receiver Menvier3030 zone control panel Scantronic 768rEUR-008 - 32 channel receiver Menvier4040 zone control panel Scantronic EXP-R1010 zone radio expander Menvier100100 zone control panel Scantronic EXP-R3030 zone radio expander Menvier300300 zone control paneli-on1616 zone control panel Menvier MRNODE receiver interface (not 705rEUR-00)i-on30EX16 zone control panelMultibus1000 zone control panel。

GW2ANR系列FPGA产品数据手册DS961-1.3说明书

未经本公司书面许可，任何单位和个人都不得擅自摘抄、复制、翻译本文档内容的部分或全部，并不得以任何形式传播。

免责声明本文档并未授予任何知识产权的许可，并未以明示或暗示，或以禁止发言或其它方式授予任何知识产权许可。

除高云半导体在其产品的销售条款和条件中声明的责任之外，高云半导体概不承担任何法律或非法律责任。

高云半导体对高云半导体产品的销售和／或使用不作任何明示或暗示的担保，包括对产品的特定用途适用性、适销性或对任何专利权、版权或其它知识产权的侵权责任等，均不作担保。

高云半导体对文档中包含的文字、图片及其它内容的准确性和完整性不承担任何法律或非法律责任，高云半导体保留修改文档中任何内容的权利，恕不另行通知。

高云半导体不承诺对这些文档进行适时的更新。

目录目录 (i)图目录 (iv)表目录 (vi)1 关于本手册 (1)1.1 手册内容 (1)1.2 相关文档 (1)1.3 术语、缩略语 (2)1.4 技术支持与反馈 (3)2 产品概述 (4)2.1 特性概述 (4)2.2 产品信息列表 (6)3 结构介绍 (7)3.1 结构框图 (7)3.2 Memory (8)3.2.1 SDR SDRAM (8)3.2.2 NOR FLASH (9)3.3 可配置功能单元 (10)3.4 输入输出模块 (11)3.4.1 简介 (11)3.4.2 I/O电平标准 (12)3.4.3 I/O逻辑 (14)3.4.4 I/O逻辑工作模式 (16)3.5 块状静态随机存储器模块 (22)3.5.1 简介 (22)3.5.2 存储器配置模式 (23)3.5.3 存储器混合数据宽度配置 (24)3.5.4 校验位功能配置 (25)3.5.5 同步操作 (25)3.5.7 BSRAM操作模式 (25)3.5.8 时钟模式 (27)3.6 数字信号处理模块 (28)3.6.1 简介 (28)3.6.2 数据A、数据B和进位C的加法/减法运算DSP操作模式配置 (31)3.7 时钟 (32)3.7.1 简介 (32)3.7.2 全局时钟网络 (32)3.7.3 锁相环 (35)3.7.4 高速时钟 (37)3.7.5 DDR存储器接口时钟管理DQS (37)3.8 长线 (38)3.9 全局复置位 (38)3.10 编程配置 (38)3.11 片内晶振 (39)4 电气特性 (40)4.1 工作条件 (40)4.1.1 绝对最大范围 (40)4.1.2 推荐工作范围 (41)4.1.3 电源上升斜率 (41)4.1.4 热插拔特性 (42)4.1.5 POR特性 (42)4.2 ESD性能 (42)4.3 DC电气特性 (42)4.3.1 推荐工作范围DC电气特性 (42)4.3.2 静态电流 (44)4.3.3 I/O推荐工作条件 (44)4.3.4 单端I/O DC电气特性 (45)4.3.5 差分I/O DC电气特性 (46)4.4 AC开关特性 (47)4.4.1 CFU开关特性 (47)4.4.2 BSRAM开关特性 (47)4.4.3 DSP开关特性 (47)4.4.4 Gearbox开关特性 (47)4.4.5 时钟和I/O开关特性 (47)4.4.7 锁相环开关特性 (48)4.5 编程接口时序标准 (48)5 器件订货信息 (49)5.1 器件命名 (49)5.2 器件封装标识示例 (50)图目录图3-1结构概念示意图 (7)图3-2 CFU结构示意图 (10)图3-3 IOB结构示意图 (11)图3-4 GW2ANR系列FPGA产品I/O Bank分布示意图 (12)图3-5 I/O逻辑输出示意图 (14)图3-6 I/O逻辑输入示意图 (14)图3-7 IODELAY示意图 (15)图3-8 GW2ANR的I/O寄存器示意图 (15)图3-9 GW2ANR的IEM示意图 (16)图3-10普通模式下的I/O逻辑结构示意图 (16)图3-11 SDR模式下的I/O逻辑结构示意图 (17)图3-12 I/O逻辑的DDR输入示意图 (17)图3-13 I/O逻辑的DDR输出示意图 (17)图3-14 I/O逻辑的IDES4输入示意图 (18)图3-15 I/O逻辑的OSER4输出示意图 (18)图3-16 I/O逻辑的IVideo输入示意图 (18)图3-17 I/O逻辑的OVideo输出示意图 (19)图3-18 I/O逻辑的IDES8输入示意图 (19)图3-19 I/O逻辑的OSER8输出示意图 (19)图3-20 I/O逻辑的IDES10输入示意图 (19)图3-21 I/O逻辑的OSER10输出示意图 (20)图3-22 IO逻辑的IDDR_MEM输入示意图 (20)图3-23 IO逻辑的ODDR_MEM输出示意图 (20)图3-24 IO逻辑的IDES4_MEM输入示意图 (21)图3-25 IO逻辑的OSER4_MEM输出示意图 (21)图3-26 IO逻辑的IDES8_MEM输入示意图 (21)图3-27 IO逻辑的OSER8_MEM输出示意图 (22)图3-28单端口、伪双端口及双端口模式下的流水线模式 (26)图3-29独立时钟模式 (27)图3-30读写时钟模式 (27)图3-31单端口时钟模式 (28)图3-32 DSP宏单元 (29)图3-33 GW2ANR时钟资源 (32)图3-34 GCLK象限分布示意图 (33)图3-35 DQCE结构示意图 (34)图3-36 DCS接口示意图 (34)图3-37 DCS Rising Edge模式下的时序示意图 (34)图3-38 DCS Falling Edge模式下的时序示意图 (35)图3-39 PLL示意图 (35)图3-40 GW2ANR HCLK示意图 (37)图3-41 DQS示意图 (38)图5-1器件命名方法–ES (49)图5-2器件命名方法–Production (49)图5-3器件封装标识示例 (50)表目录表1-1术语、缩略语 (2)表2-1产品信息列表 (6)表2-2 GW2ANR-18列表 (6)表3-1 GW2ANR系列FPGA产品支持的输出I/O类型及部分可选配置 (13)表3-2 端口介绍 (14)表3-3 BSRAM信号功能 (23)表3-4存储器配置列表 (23)表3-5双端口混合读写数据宽度配置列表 (24)表3-6伪双端口混合读写数据宽度配置列表 (25)表3-7时钟模式配置列表 (27)表3-8 DSP端口描述 (29)表3-9内部寄存器描述 (30)表3-10 PLL端口定义 (36)表3-11片内晶振的输出频率选项 (39)表4-1绝对最大范围 (40)表4-2推荐工作范围 (41)表4-3电源上升斜率 (41)表4-4热插拔特性 (42)表4-5 POR电压标准 (42)表4-6 GW2ANR ESD - HBM (42)表4-7 GW2ANR ESD - CDM (42)表4-8推荐工作范围内DC电气特性 (42)表4-9静态电流 (44)表4-10 I/O推荐工作条件 (44)表4-11单端I/O DC电气特性 (45)表4-12差分I/O DC电气特性 (46)表4-13 CFU时序参数 (47)表4-14 BSRAM时序参数 (47)表4-15 DSP时序参数 (47)表4-16 Gearbox时序参数 (47)表4-17外部开关特性 (47)表4-18片内晶振特性参数 (48)表4-19 PLL特性参数 (48)1关于本手册 1.1手册内容1关于本手册1.1手册内容GW2ANR系列FPGA产品数据手册主要包括高云半导体GW2ANR系列FPGA产品特性概述、产品资源信息、内部结构介绍、电气特性、编程接口时序以及器件订货信息，帮助用户快速了解高云半导体GW2ANR系列FPGA产品以及特性，有助于器件选型及使用。

艾特顿 199160 商品说明说明书

Eaton 199160Eaton Moeller® series PKZM0 Motorschutzschalter, 9 kW, 16 - 20 A, Push-in-KlemmenAllgemeine spezifikationEaton Moeller® series PKZM0 Motor-protective circuit-breaker19916075 mm109 mm 45 mm 0.349 kgIEC/EN 60947 VDE 0660 UL CSAIEC/EN 60947-4-1 UL 60947-4-1CSA-C22.2 No. 60947-4-1-14 CEUL File No.: E36332UL Category Control No.: NLRV CSA File No.: 165628 CSA Class No.: 3211-05 UL CSA4015081972449PKZM0-20-PIProduktnameKatalognummer Produkt Länge/Tiefe Produkthöhe Produktbreite Produktgewicht Zertifikat(e)EANModellcodeDrehknopfPhasenausfallempfindlichkeit (gemäß IEC/EN 60947-4-1, VDE 0660 Teil 102)MotorschutzPhasenausfallempfindlich3-polig 100.000 Schaltvorgänge100.000 SchaltvorgängeHutschienenmontage optionalAufschnappbar auf Hutschiene IEC/EN 60715 mit 7,5 oder 15 mm Höhe.40 Schaltspiele/hIII3MotorschutzschalterFinger- und handrückensicher, Berührungsschutz bei senkrechter Betätigung von vorne (EN 50274)6000 V AC25 g, Mechanisch, entsprechend IEC/EN 60068-2-27, Halbsinusstoß 10 msAuch Motoren mit Effizienzklasse IE3Nebenstromkreis: Manueller Typ E bei Einsatz mit Klemme, oder geeignet für Gruppeninstallationen, (UL/CSA)≤ 0,25 %/K, Restfehler für T > 40°-25 - 55 °C, Arbeitsbereich-5 - 40 °C gemäß IEC/EN 60947, VDE 0660Motorstarterkombinationen Typ MSC…Stellgliedtyp Merkmale Funktionen Polzahl Lebensdauer, elektrischLebensdauer, mechanisch MontagemethodeEinbaulageBetriebsfrequenzÜberspannungskategorie VerschmutzungsgradProduktkategorieSchutzBemessungsstoßspannungsfestigkeit (Uimp) SchockfestigkeitGeeignet fürTemperaturkompensationVerwendet mitMax. 2000 m-25 °C55 °C25 °C40 °C40 °C80 °CFeuchte Wärme, zyklisch, nach IEC 60068-2-30 Feuchte Wärme, konstant, nach IEC 60068-2-781 x (1 - 6) mm²18 - 812 mm50 Hz60 Hz20 A5.5 kW9 kW690 V690 V20 A18 kA, 240 V, SCCR (UL/CSA) mit Leistungsschütz DILM25 18 kA, 480 Y/277 V, SCCR (UL/CSA) mit Leistungsschütz DILM25310 A, Irm, Einstellbereich max.± 20% Toleranz, AuslöserblöckeGrundgerät befestigt 15,5 x lu, Auslöserblöcke 1.5 HP 5 HP 3 HP 15 HPHöheUmgebungsbetriebstemperatur – min Umgebungsbetriebstemperatur – max Umgebungsbetriebstemperatur (gekapselt) – min Umgebungsbetriebstemperatur (gekapselt) – max Umgebungstemperatur Lagerung - min Umgebungstemperatur Lagerung - max Klimafestigkeit Anschlusskapazität (feindrähtig)Anschlusskapazität (ein-/mehrdrähtig AWG)Abisolierlänge (Hauptleiter)Bemessungsfrequenz - minBemessungsfrequenz - max Bemessungsbetriebsstrom (Ie) Bemessungsbetriebsleistung bei AC-3, 220/230 V, 50 Hz Bemessungsbetriebsleistung bei AC-3, 380/400 V, 50 Hz Bemessungsbetriebsspannung (Ue) - min Bemessungsbetriebsspannung (Ue) - max Bemessungsdauerstrom (Iu)Bemessungskurzschlussstrom (Typ E) Kurzschlussauslöser Zugeor. Motorleist. b. 115/120 V, 60 Hz, 1-phasig Zugeordnete Motorleistung bei 200/208 V, 60 Hz, 3-phasig Zugeordnete Motorleistung bei 230/240 V, 60 Hz, 1-phasig Zugeordnete Motorleistung bei 575/600 V, 60 Hzm 3-phasigPush-In Klemmen020 A20 AÜberlastauslöser: Auslöseklasse 10 A 5.82 W0 W0 W0 WAnforderungen der Produktnorm sind erfüllt.Anforderungen der Produktnorm sind erfüllt.Anforderungen der Produktnorm sind erfüllt.Anforderungen der Produktnorm sind erfüllt.Anforderungen der Produktnorm sind erfüllt.Unzutreffend, da die gesamten Schaltgeräte überprüft werden müssen.Unzutreffend, da die gesamten Schaltgeräte überprüft werden müssen.Anforderungen der Produktnorm sind erfüllt.Verbindung Anzahl der Hilfskontakte (Wechsler)Anzahl der Hilfskontakte (Öffner)Anzahl Hilfskontakte (Schließer)Überlastauslösestromeinstellung - min Überlastauslösestromeinstellung - max Auslösecharakteristik Geräteverlustleistung, stromabhängig pvid Verlustleistungskapazität PdissVerlustleistung pro Pol, stromabhängig, PvidStatische Verlustleistung, stromunabhängig PVS10.2.2 Korrosionsbeständigkeit10.2.3.1 Wärmebeständigkeit von Umhüllung10.2.3.2 Widerstandsfähigkeit Isolierstoffe gewöhnliche Wärme 10.2.3.3 Widerst. Isolierstoffe abnorm. Wärme/Feuer durch int. elektr. Auswirk.10.2.4 Beständigkeit gegen UV-Strahlung10.2.5 Heben10.2.6 Schlagprüfung10.2.7 BeschriftungenUnzutreffend, da die gesamten Schaltgeräte überprüft werden müssen.Anforderungen der Produktnorm sind erfüllt.Unzutreffend, da die gesamten Schaltgeräte überprüft werden müssen.Unzutreffend, da die gesamten Schaltgeräte überprüft werden müssen.Liegt in der Verantwortung des Schaltanlagenbauers.Liegt in der Verantwortung des Schaltanlagenbauers.Liegt in der Verantwortung des Schaltanlagenbauers.Liegt in der Verantwortung des Schaltanlagenbauers.Liegt in der Verantwortung des Schaltanlagenbauers.Die Erwärmungsberechnung liegt in der Verantwortung des Schaltanlagenbauers. Eaton stellt Verlustleistungsdaten der Geräte bereit.Liegt in der Verantwortung des Schaltanlagenbauers. Die Spezifikationen für die Schaltgeräte müssen beachtet werden.Liegt in der Verantwortung des Schaltanlagenbauers. Die Spezifikationen für die Schaltgeräte müssen beachtet werden.Das Gerät erfüllt die Anforderungen, wenn die Informationen in der Montageanweisung (IL) beachtet werden.DA-DC-00004889.pdfDA-DC-00004919.pdfETN.PKZM0-20-PI.edzIL122024ZUWIN-WIN mit Push-in-TechnikProduktübersicht für den Maschinenbau Sortimentskatalog Motoren schalten und schützenpkzm0_pi.stpmotorschutzschalter_bis_32a_pi.dwgeaton-manual-motor-starters-pkz-dimensions.epseaton-manual-motor-starters-pkz-dimensions-002.eps eaton-manual-motor-starters-pkzm-pkzm0-dimensions.eps 121X042121X00210.3 Schutzart von Baugruppen10.4 Luft- und Kriechstrecken10.5 Schutz gegen elektrischen Schlag10.6 Einbau von Betriebsmitteln10.7 Innere Stromkreise und Verbindungen10.8 Anschlüsse für von außen eingeführte Leiter 10.9.2 Betriebsfrequente Spannungsfestigkeit 10.9.3 Stoßspannungsfestigkeit10.9.4 Prüfung von Umhüllungen aus Isolierstoff 10.10 Erwärmung10.11 Kurzschlussfestigkeit10.12 Elektromagnetische Verträglichkeit10.13 Mechanische Funktion Declarations of conformity eCAD model Installationsanleitung Installationsvideos KatalogemCAD model ZeichnungenEaton Konzern plc Eaton-Haus30 Pembroke-Straße Dublin 4, Irland © 2023 Eaton. Alle Rechte vorbehalten. Eaton ist eine eingetrageneMarke.Alle anderen Warenzeichen sindEigentum ihrer jeweiligenBesitzer./socialmedia。

友达液晶面板匹配连接器料号清单

品牌
航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子禾昌禾昌航空电子航空电子航空电子航空电子航空电子航空电子航空电子航空电子信音航空电子航空电子禾昌禾昌禾昌航空电子航空电子航空电子航空电子航空电子禾昌禾昌航空电子航空电子航空电子航空电子航空电子禾昌航空电子航空电子航空电子航空电子航空电子航空电子禾昌禾昌航空电子航空电子
69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140
M350DVR01.1 CELL M350DVR01.1 CELL M350DVR01.0 M320QAN01.2 G320ZAN01.0 M320DVN01.2 M320DVN01.2 M320QAN01.0 CELL M320QAN01.0 M320DVN01.0 M320DVN01.0 M315DVR01.2 CELL P320HVN05.0 CELL P320HVN05.0 CELL P320HVN03.1 P320HVN04.1 M315DVR01.1 CELL T320XVN02.G CELL M315DVR01.0 CELL P320HVN03.0 T320HVN05.4 CELL T320HVN05.A CELL T320HVN06.0 T320HVN05.6 CELL P320HVN02.0 P320XVF03.0 G286HAN01.0 P280HVN02.0 M270QAN01.1 CELL M270HTN02.1 CELL M270DTR01.0 CELL M270DTR01.0 CELL M270HVR01.0 CELL M270HVR01.0 CELL M270DTR01.0 M270DTR01.0 M270HVR01.1 CELL M270HVN02.00B M270DTN01.1 CELL M270DTN01.1 CELL M270HVN02.5 G270ZAN01.1 M270HTN02.2 CELL G270ZAN01.0 M270QAN02.1 M270QAN02.0 M270HTN02.3 M270HTN02.0 M270HVN02.3 CELL M270DTN01.0 CELL M270DTN01.0 CELL M270DAN02.6 M270DAN02.6 M270DTN01.0 M270DTN01.0 M270DTN01.3 M270DTN01.3 M270DAN02.3 M270DAN02.3 M270HVN02.3 M270DAN02.5 M270DAN02.5 M270DAN02.0 M270DAN02.0 M270HVN02.0 CELL P270HVN01.0 M270HVN02.0 M250HTN01.6 M250HTN01.5 M250HTN01.2 M250HTN01.1 M250HTN01.1 CELL

20-COMM-H RS485 HVAC 适配器固件版本 2.009 发行说明书

Release Note 20-COMM-H RS485 HVAC Adapter Firmware Revision 2.009This release note describes major revision 2, minor revision 9 of firmware for 20-COMM-H RS485 HV AC adapters.IntroductionThe following information is included in this document: EnhancementsThis section describes enhancements provided in this revision of firmware.•Added support for PowerFlex 750-Series drives (PowerFlex 753 and PowerFlex 755) in all three modes of operation (Modbus RTU, FLN P1, and Metasys N2) with the following limitations: –Does not support Chinese, Japanese, and Korean languages.–Cannot access drive DPI port 7 and higher.•Added support for PowerFlex 700VC drives in all three modes of operation (Modbus RTU, FLN P1, and Metasys N2).•Added new Parameter 33 - [RTU Memory Map]. This parameter sets the register mapping that the adapter uses when the adapter operates in the ‘Modbus RTU’ mode. The settings for this parameter are:–‘0’ (Legacy), the default setting, which provides Modbus register mapping that conforms to the Modbus standard specification, which is typically used by PowerFlex 7-Class drives.–‘1’ (PF4-Class) which provides Modbus register mapping that matches the register mapping used by PowerFlex 4-Class drives. This mapping reduces the programming time required for PowerFlex 7-Class drives when they are used on a network consisting mainly of PowerFlex 4-Class. For details of this register mapping, see Appendix C in the PowerFlex 4 Drive User Manual, publication 22A-UM001.Important:The register mapping provided with setting ‘1’ does not pass configured Datalinks through the adapter. Therefore, they are ignored.Topic Page Enhancements 1Corrected Anomalies 2Determining Firmware Revision 2Updating the Firmware 4Restrictions 7Compatible Revisions 8Rockwell Automation Support 8Product Satisfaction Return 8220-COMM-H RS485 HVAC Adapter Firmware Revision 2.009Corrected Anomalies There are no anomalies corrected in this revision of firmware.Determining Firmware Revision This section describes procedures to determine the firmware revision of your 20-COMM-H RS485 HV AC adapter.Using the LCD HIMUsing DriveExplorer Lite/Full Softwareunch DriveExplorer software.ing a 1203-USB or 1203-SSS converter, go online with the drive thatis connected to the adapter.3.In the DriveExplorer treeview, select the 20-COMM-H Modbus RTUadapter (see Figure 1).4.Click the information icon to display the adapter Properties screen.5.The ‘Revision’ field shows the present revision of the adapter firmware(for example, 2.008).TIP: When selecting the 20-COMM-H adapter using DriveExplorer Lite or Full software, version 5.01 or later, the adapter firmware revision is also shown in the right pane of the DriveExplorer window.20-COMM-H RS485 HVAC Adapter Firmware Revision 2.0093Figure 1 DriveExplorer Window with Information Icon and Device Properties Using DriveExecutive Softwareunch DriveExecutive software.ing a 1203-USB or 1203-SSS converter, go online with the drive thatis connected to the adapter.3.In the DriveExecutive treeview, select the 20-COMM-H adapter (see Figure 2).4.Click the information iconto display the adapter Properties screen.5.The ‘Revision’ field shows the present revision of the adapter firmware(for example, 2.008).Figure 2 DriveExecutive Window with Information Icon and Device Properties420-COMM-H RS485 HVAC Adapter Firmware Revision 2.009Updating the Firmware This section describes procedures to update the adapter firmware. Flash kitsfor drives, communication adapters, and peripherals are provided on the Allen-Bradley Web Updates site at /support/abdrives/webupdate . Updating can be performed using a 1203-USB or 1203-SSS converter. For information about how to connect to your drive, see their respective User Manual. They can be viewed/downloaded on the Literature Library website at .Installing the Flash Kit1.Go to the Allen-Bradley Web Updates site at /support/abdrives/webupdate and install the flash kit for the20-COMM-H adapter, which also automatically installs theControlFLASH software on your computer.2.You are now ready to use DriveExplorer, DriveExecutive,ControlFLASH or HyperTerminal software to update the adapter. See the respective section below and follow the ing DriveExplorer Lite/Full Software to Update Firmware1.With the Flash Kit installed (see Installing the Flash Kit ), launchDriveExplorer software.ing a 1203-USB or 1203-SSS converter, go online with the drive thatis connected to the adapter.3.In the DriveExplorer treeview, select the 20-COMM-H adapter.4.Click the information icon(see Figure 1) to display the adapterProperties screen.5.On the 20-COMM-H Properties screen, click the Details tab.Important:This update may cause the adapter parameters to revert totheir default values. You may want to save yourconfiguration using DriveExplorer software or the HIMCopyCat feature before updating.6.Click Flash Update to start the update.7.Select ‘2.009.xx’ from the list of available updates.8.Click Next >.9.Follow the remaining screen prompts until the update procedurecompletes and displays the new firmware revision 2.009.ATTENTION: Risk of permanent equipment damage exists. Once an update has been started, do not remove power from the drive until after the download has completed and the adapter MOD status indicator startsflashing green. If power is removed before this occurs, the adapter may be permanently damaged. An adapter that has been damaged in this way cannot be repaired.20-COMM-H RS485 HVAC Adapter Firmware Revision 2.0095Using DriveExecutive Software to Update Firmware1.With the Flash Kit installed (see Installing the Flash Kit), launchDriveExecutive software.ing a 1203-USB or 1203-SSS converter, go online with the drive thatis connected to the adapter.3.In the DriveExecutive treeview, select the 20-COMM-H adapter.4.Click the information icon(see Figure 2) to display the adapterProperties screen.5.On the 20-COMM-H Properties screen, click the Component Detailstab.Important:This update may cause the adapter parameters to revert to their default values. You may want to save yourconfiguration using DriveExecutive software or the HIMCopyCat feature before updating.6.Click Flash Update to start the update.7.Select the 20-COMM-H from the list of available devices.8.Click Next >.9.Select ‘2.009.xx’ from the list of available updates.10.Click Next >.11.Follow the remaining screen prompts until the update procedurecompletes and displays the new firmware revision 2.009.Using ControlFLASH Software to Update Firmware1.With the Flash Kit installed (see Installing the Flash Kit on page4),choose Start > (All) Programs > Flash Programming Tools >ControlFLASH to launch the ControlFLASH software.2.On the ControlFLASH Welcome screen, click Next >.3.Choose the appropriate 20-COMM-H update from the list of availableupdates for the mode (RTU, N2 or FLN P1) in which the adapter is set.4.Click Next >.Important:This update may cause the adapter parameters to revert to their default values. You may want to save yourconfiguration using the HIM CopyCat feature, orDriveExplorer or DriveExecutive software before updating.5.Expand the treeview for the communication path you are using, andselect the drive icon that represents the drive with the 20-COMM-H adapter you are updating.6.Click OK.7.If the Multiple Assemblies Found window appears, select‘Port X - 20-COMM-H’ from the list and click OK. If this window does620-COMM-H RS485 HVAC Adapter Firmware Revision 2.0098.With the Firmware Revision window displayed, select ‘2.009.xx’ fromthe list of available updates.9.Click Next >.10.Follow the remaining screen prompts until the update procedurecompletes and displays the new firmware revision 2.009.Using HyperTerminal Software to Update Firmware1.With the Flash Kit installed (see Installing the Flash Kit on page 4),launch HyperTerminal software.ing a 1203-USB or 1203-SSS converter, go online with the drive thatis connected to the adapter.3.Set the adapter network protocol rotary switch to either the ‘N2’ or ‘P1’position before proceeding.Important:If the ‘N2’ or ‘P1’ setting is different from what the adapterswitch was previous set to, you must power cycle the drive.4.Press Enter until the main menu appears.5.In the main menu, press ‘3’ to flash upgrade.6.Press the number key that corresponds to the ‘20-COMM-H’ in the list.7.Press ‘Y’ (for Yes) to update the firmware.The terminal program will start displaying the letter ‘C’. This signals the Xmodem protocol that the download may proceed. You then have one minute to start the transfer.8.From the Transfer menu, choose Send File to display the Send Filescreen.a.Click Browse.b.Navigate to the flash file located in C:\Program Files\ControlFLASH\0001\0078\1F00.Main Menu - Enter Number for Selection1> Display Setup Parameters2> Display Event Queue3> Flash Upgrade ATTENTION: Risk of injury or equipment damage exists. When youperform an update, the drive will fault if it is receiving control I/O from the adapter. Verify that the drive has stopped safely or is receiving control I/O from an alternate source before beginning an update.20-COMM-H RS485 HVAC Adapter Firmware Revision 2.0097c.In the Select File to Send window list, select the‘20-COMM-H_2_009_03_AppV2_N2P1_NewHdr.bin’ file.d.Click Open.This file name now appears in the Filename box in the Send Filescreen.e.From the Protocol pull-down menu, choose ‘Xmodem’.f.Click Send.A dialog box appears and reports the update progress. Whencomplete, a ‘Flash Complete’ message appears. Press any key tocontinue.Important:Keep the adapter powered for 15 seconds after theoperation has completed or until the adapter MOD statusindicator starts flashing green.TIP: To cancel the flash update at any time, press Ctrl-X.9.Repeat steps 4 through 8 for the‘20-COMM-H_2_009_05_ComboNewHdr.bin’ file.10.Repeat steps 4 through 8 for the‘20-COMM-H_2_001_02_BootNewHdrV2.bin’ file.11.After the firmware update successfully completes, set the adapternetwork protocol rotary switch to the desired mode (RTU, N2 or P1) inwhich you want to operate the adapter.Important:Changing to a new rotary switch position requires you topower cycle the drive.12.Press Enter to return to the main menu.Restrictions For PowerFlex 753 and PowerFlex 755 Drives, these restrictions apply:•The Reference and Feedback words are internally scaled 1:32 to allow arange of 0 to 650.00 Hz.•32-bit floating point parameters are mapped as follows:–Datalinks are mapped as Little Endian (that is, Low/High wordordering).–User In/Out registers are mapped as Big Endian (that is, High/Lowword ordering).–Direct DPI parameters are mapped as Big Endian (that is, High/Lowword ordering).–This mapping structure also applies to PowerFlex 700VC driveswhich use 32-bit Datalinks.U.S.Allen-BradleyDrivesTechnicalSupport-Tel:(1)262.512.8176,Fax:(1)262.512.2222,Email:*****************,Online:/support/abdrivesCompatible Revisions To use this revision of firmware, update your tools and devices as needed.Rockwell AutomationSupport Rockwell Automation provides technical information on the web to assist you in using our products. At , youcan find technical manuals, a knowledge base of Frequently AskedQuestions (FAQs), technical and application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the best use of these tools.Rockwell Automation also provides complimentary phone support for drives, communication adapters, and peripherals. If you experience a problem with a device, please see the information in its User Manual. For further help in getting your device operational, contact a Customer Support representative.For an additional level of technical phone support for installation, configuration, and troubleshooting, TechConnect Support programs are available. For more information, contact your local distributor, a Rockwell Automation representative, or visit . Product Satisfaction Return Rockwell Automation tests all products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow the steps below. Tool/DeviceVersion Required DriveExplorer Lite/Full software4.01 or later DriveExecutive software3.01 or later PowerFlex 7-Class driveall versions compatible LCD HIMall versions compatible RSLinx Classic software 2.43 or laterUnited States (1) 262.512.8176Monday – Friday, 7am – 6pm CST Outside United States Please contact your local Rockwell Automation representative for any technical support issues.United States Contact your distributor. You must provide a Customer Support case number (see phone number above to obtain one) to your distributor to complete the return process.Outside United States Contact your local Rockwell Automation representative for the return procedure.。

Eaton SL800 Classic 7.2千伏特、720公安姆电流真空接触器安装、运行和维护说明

SL800 7.2 Kilovolt, 720 Ampere Vacuum ContactorHAZARDOUS VOLTAGERead and understand these instructions before attempting any installation, operation or maintenance of the SL vacuum contactor. Retain this document for future use.This equipment shall be installed and serviced only by qualified electrical personnel. Aqualified person is one who is familiar with the construction and operation of this equipment and who is aware of the hazards involved.Instructions for Installation, Operation and Maintenance of the SL800 Classic 7.2 Kilovolt, 720 Amp. Vacuum contactorInstruction BulletinDESCRIPTIONThe SL800 Classic vacuum contactor is a 7.2kV, 720 amp contactor designed for starting and controlling three-phase, 50 or 60 Hz AC motors. Horsepower ratings are shown in Table I. Motor full load current should not exceed the contactor current rating.The short-circuit capacity of the power system may exceed the interrupting capacity of the contactor. The contactor should have short-circuit protection with current-limiting fuses as specified for the application. Substitute fuses should not be used without proper authorization by the factory. Ratings for the contactor are shown in Table II.TABLE I. APPLICATION DATARange of System VoltageHorsepower Ratings TransformerSwitchingRating(kVA)Interrupting Capacity (rms)Symmetrical at Nominal UtilizationVoltage SynchronousMotorInductionMotorFuses(kA)Controller(kVA)0.8 PF 1.0 PF2200-2500 3000 3500 3000 250 50 200,000 3800-5000 5000 6000 5000 4500 50 350,000 6200-7200 8000 10000 8000 6000 50 570,000TABLE II. RATINGSMaximum Interrupting Current (3 Operations) 12,500A Control VoltagesAC 110/120, 220/240 VoltsRated Current 720 Amperes 50/60 Hz Maximum Rated Voltage 7,200 Volts DC 125 VoltsMaking/Breaking Capacity Control Circuit Burden (Rated Volt) AC4-Make 8,000 Amperes UL7,650 Amperes IECClosing 2600 VAAC4-Break 6,400 Amperes UL6,120 Amperes IECHolding 80 VAShort Time Current Auxiliary Contact Rating30 Seconds 4,800 Amperes Voltage (Maximum) 600 Volts1 Second 12,000 Amperes Continuous Current 10 Amperes7.8 Milliseconds 89.2 kA Making Capacity (AC) 7200 VA Mechanical Life 250,000 Operations Making Capacity (DC) 200 VA Electrical Life 200,000 Operations Breaking Capacity (AC) 720 VABIL 60kV Breaking Capacity (DC) 200 VA Dielectric Strength (60 Hz) 18.2 kV (1 minute) Latch (when specified)Closing Time 80 Milliseconds Mechanical Life 250,000 OperationsOpening Times 50 to 330 MillisecondsDip Switch SelectableRefer to Table IIIb Trip Voltages (DC) 24/48/96 VoltsTrip Voltages (AC) 110/120/220/240 Volts(50/60 Hz)Arcing Time 12 Milliseconds(3/4 cycle) or less Min Trip Voltage 80% Rated Coil Voltage Trip Burden 24 VDC 1200 VAPickup Voltage 80% Rated Coil Voltage 48 & 96 VDC 400 VA Dropout Voltage 60% Rated Coil Voltage 110 & 220 VAC 500 VAINSTALLATIONALL WORK PERFORMED ON THIS CONTACTOR SHOULD BE DONE WITH THE MAINDISCONNECT DEVICE OPEN AND LOCKED OUT. AS WITH ANY CONTACTOR OF THIS VOLTAGE, THERE IS DANGER OF ELECTROCUTION AND/OR SEVERE BURNS.MAKE CERTAIN THAT POWER IS OFF. CHECK FOR VOLTAGE WITH VOLTAGE SENSOR OR A METER OF THE APPROPRIATE RANGE.MAKE CERTAIN THAT ALL TRANSFORMERS ARE ISOLATED TO PREVENT FEEDBACK AND THE RESULTANT GENERATION OF HIGH VOLTAGE.The SL800 Classic contactor is a direct replacement for SJA800A contactors in Classic Ampgard starter assemblies. No mechanical changes to the starter cell or the contactor are required when installing the SL800 Classic contactor.The contactor weighs about 210 pounds. It should be handled gently to avoid damage to the vacuum bottles and factory adjustments. A horizontal plate is provided at the front for pulling the contactor out of its cell, or for pushing it back into place.When a type SJA contactor is installed in a medium voltage controller it can be moved to a draw out position or removed from the enclosure as follows:1. Provide a lift truck or suitable platform to receive the contactor as it comes out.2. Make sure all circuits are de-energized.3. Remove the three power circuit fuse assemblies using the fuse puller supplied with the starter.4. Disconnect the control plug and stow it so that the cable will not be damaged. Disconnect the two 3-point separable terminal blocks on the right front of the isolating switch.5. Trip the latch on the left side by holding it upward (using your foot if desired, when unit is at floor level).6. While holding the latch up, pull the contactor out ward. It will roll forward and should re-latch at a detent position, partially out of the cell. All routine inspection and maintenance can be done with the contactor in this latched position.7. To remove the contactor completely, reverse the latch, pressing it downward. The contactor can then be rolled out of its cell.Once the contactor is on the floor, it can be moved easily by means of a short length of 0.75-inch (19.1-mm) pipe inserted into a bracket on the top front of the right side sheet. The contactor can be pushed or pulled like a wagon in this manner.To install the SL800 Classic contactor, reverse the procedure.Fig. 1 Moving the ContactorCONTACTOR OPERATIONThe SL contactor has its main contacts sealed inside ceramic tubes from which all air has been evacuated, i.e., the contacts are in vacuum. The arc simply stops when the current goes through zero as it alternates at line frequency. The arc usually does not survive beyond the first half cycle after the contacts begin to separate. The ceramic tube with the moving and stationary contacts enclosed is called a vacuum interrupter or a vacuum bottle and there is one such bottle for each pole of the contactor. A metal bellows (like a small, circular accordion) allows the moving contact to be closed and pulled open from the outside without letting air into the vacuum chamber of the bottle.The moving contacts are driven by a molded plastic crossbar rotating with a square steel shaft supported by two shielded, pre-lubricated ball bearings that are clamped in true alignment for long life and free motion. Only the end edges of the square shaft are rounded to fit the bearings, so that portions of the four shaft flats go through the bearings for positive indexing of the mechanical safety interlocks.The contacts in an un-mounted vacuum bottle are normally-closed, because the outside air pressure pushes against the flexible bellows. For contactor duty, the contacts must be open when the operating magnet is not energized. Therefore, the contacts of the vacuum bottles must be held apart mechanically against the air pressure when used in a contactor.In the SL contactor, all of the bottles are held open by two kickout springs on the front of the contactor. The kickout springs press against the moving armature and crossbar and thereby force the bottles into the open contact position. Note that in the open position, the crossbar is pulling the moving contacts to hold them open.Up to an altitude of 3300 feet, the contactor is designed to tolerate normal variations in barometric pressure. Special factory modifications are required if the contactor is to be applied at high altitude. Contact the factory if the contactor will be applied at elevations above 3300 feet.The contactor is closed by energizing the contactor control board with the appropriate control voltage at terminals 1 and 2. The control board rectifies the input voltage and applies a pulse width modulated DC output voltage to the coil. The output voltage is approximately full voltage for the first 200 milliseconds after energization, during which time the contactor closes and seals. The output voltage is then automatically reduced to approximately 15 VDC to maintain the contactor in the closed position.The coil core is magnetized which rotates the armature shaft, armature, and crossbar. As the armature moves toward the coil core, the main contacts close. The crossbar continues to move an additional distance (known as overtravel), which allows for contact preload and wear. The overtravel distance is the gap between the lower bottle nut and the pivot plate as shown in Figure 2.Fig. 2 Closed ContactorWhen control power is removed from the control board, the magnetically held contactor remains closed for a preset time and then opens. The range of time between the removal of control power and contact opening is from 50 to 330 milliseconds depending on the setting selected on the control board. The time can be adjusted for such factors as fuse coordination and voltage loss ride-through. Unless otherwise specified, the factory default dropout setting is 130 milliseconds, or approximately 8 line cycles (60Hz). To maintain proper coordination with the starter power fuses, do not use the 50ms setting.A selectable dip switch is located on the control board for setting the control voltage level and the contactor dropout time. See Figure 3. The control board must be removed from the cavity in the contactor housing to gain access to the dip switch. Table IIIa lists the available voltage settings and Table IIIb lists the available dropout settings. These tables are also printed on the back of the control board. The control voltage setting should match the starter control circuit voltage.Fig. 3 Coil Control Board with Dip SwitchTABLE IIIb. CONTROL BOARD DROPOUT SETTINGS Delay Setting SW4 SW5SW6 50 ms On Off Off 130 ms Off On Off 250 ms On On Off 330 msOffOffOnThe control board provides the economizing function for the main coil circuit. The L63 interlock used in the economizing circuit on the SJA800A contactor is therefore not needed in this design. It has been removed from the SL800 Classic contactor.WIRINGRefer to Figure 4 for standard control wiring formagnetically held contactors. To close the contactor, apply power to terminals 1 and 2 on the controlboard. Power must be maintained to terminals 1 and 2 to keep the contactor in the closed position. The closing coil is connected to terminals 5 and 6.Fig. 4 Connections for Magnetically Held ContactorRENEWAL AND REPLACEMENT PARTS•SL800 Classic VI Assemblies, set of three - 54A1307G27• Control Board- 54A1307G24•Contactor Coil - 54A1307G18。