01CE EN71-2-3 test report(game sets)[1]
出厂验收测试FAT
嘉华通软
工厂测试方案
Factory Acceptance Test Protocol
文件编号 Doc.Ref 设备型号 Equipment
JW5301
监管码赋码系统工厂测试方案
颁发部门/Issuing Department: 生效日期/Effective Date:
质量保证部 Quality Assurance Department
年/Year
月/Month
日/Day
起草人 Issued by 起草人 Issued by 审核人 Reviewed by 审核人 Reviewed by 审核人 Reviewed by 审核人 Reviewed by 批准人 Approved by 批准人 Approved by
单位 Company
□ 质量控制部/Quality Control Department □ 物 料 管 理 部 /Materials Management Department □ 销售部/Sales Department □ 行政管理部/Administration Department □ 生 产 管 理 部 /Production Management Department □ 疫苗二室/Vaccine Office Two □ 分装室/Filling Office □ 其他 Other
部门 Department
姓名 Name
签字 Signature
日期 Date
涉及部门/Involves Department:
□ 质量保证部/Quality Assurance Department □ 工程管理部/Engineering Management Department
欧盟EN71-1-2-3
欧盟EN71-1-2-3
BV权威EN71-1-2-3检测：欧盟EN71指令要求，为确保产品的安全性，不同地区都制定有安全标准，以便在产品生产的不同阶段实施严格的测试和生产过程控制，其中欧洲标准要算应用范围比
较广的一个。
任何去欧洲的产品，基本都免不了要经过EN71标准的测试。
以下是欧盟EN71-1-2-3内容提要：
1、EN 71-1:2005+A4-physical &mechanical Test 物理和机械性测试；包括不发声玩具、发声玩具、
耳机发声玩具、玩具柜的7000次开关测试、乘骑玩具、口动玩具；包括跌落测试, 小零件测试, 锐利边缘测试, 拉力测试, 压力测试, 线缝测试,部件测试,耳鼻眼拉力,扭力测试等.
2、EN 71-2: 2006+A1-flammability Test 易燃性测试；包括：1、成品； 2、绒毛织物或绒毛材料；
3、液体闪点测试
3、EN 71-3:1994+A1：2002-Toxic Elements Test (8 Toxic Elements Results) 8种有毒金属含量测试：（铅、镉、铬、砷、钡、贡、硒、锑）；限值标准：铅≤90、镉≤75、铬≤60 、砷≤25 、钡≤1000、贡≤60、硒≤500、锑≤60 单位：（PPM）。
玩具標準大全
玩具標準大全一.玩具和儿童产品国际标准世界玩具安全法令、标准一览表1.国际标准化组织International Organization for Standardization(ISO)ISO 8124-1：2000 玩具安全－第1部分：机械和物理性能相关的安全要求ISO 8124-2：1994 玩具安全－第2部分：阻燃ISO 8124-3：1997 玩具安全－第3部分：某些元素的转移ISO 8098：1989＋Amdt 1：1992 儿童自行车的安全要求ISO 8124-1:2000 Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical PropertiesISO 8124-2:1994FlammabilityISO 8124-3:1997Migration of Certain ElementsISO 8098:1989 Cycles - Safety Requirements for Bicycles for Y oung Children2, 阿根廷标准Instituto Argentina de Racionalization de Materials 3583:Parte 1:1986 Seguridad de los juguetes, marcado, Rotulado y embalajeParte 2: 1988 Propiedades meconicasy fisicasParte 3:1988 InflamabilidadParte 4:1991 Requisitos toxicologicosParte 5:1996 Juegos de experimentos quimicos y actividades relacionadas3.澳大利亚AS 1647.1-1990 儿童玩具安全要求第1部分：一般要求AS 1647.2-1992＋Admt.1-1995 儿童玩具安全要求第2部分：结构要求AS 1647.3-1995 儿童玩具安全要求第3部分：毒性要求AS 1647.4-1980 儿童玩具安全要求第4部分：阻燃要求AS 1990-1991 儿童用漂浮玩具和游泳辅助物的安全要求AS 1647.1-1990 Childre n’s Toys (safety requirements) Part 1: General requirementsAS 1647.2-1992 Children’s toys (safety requirements) Part 2: Constructional requirementsAS1647.2-1992/Amdt. 1-1995 Children’s Toys (safety requirements) - Constructional RequirementsAS 1647.3-1995 Children’s toys: (safe AS 1647.4-1980 Childre n’s toys (safety requirements) Part 4: Flammability requirements AS 1900-1991 Flotation toys and swimming aids for4.巴西ABNT (Brazilian Association of Technical Standards)NBR 11786/1998 玩具安全(NBR 11786/1998 - Toy Safety)5.加拿大C.R.C.,c.931 危险产品（玩具）法案Technical Standards Safety Act and Upholstered and Stuffed Articles RegulationHazardous Products Act R.S. c.H-3Hazardous Products (Toys) n Guidelines6.美国CPSC 16CFR Part1000 to End 联邦消费品安全法令ASTM F963-96a 玩具安全ANSI Z315.1-1996 三轮车安全要求ANSI/UL 696 电动玩具安全NZS 5820：1982＋Amendment No.1+COPR1 玩具安全要求NZS 5822：1992 3岁以下儿童使用玩具的吞入和窒息危险预防NZS 5820:1982 Specification for the Safety of ToysAmendment No. 1 to NZS 5820NZS 5820:1982 CORR1 NZS 5822:1992 The Prevention o 8.南非SABS ISO 8124-1：2000 玩具安全－第1部分：机械和物理性能相关的安全要求SABS ISO 8124-2：2000 玩具安全－第2部分：阻燃SABS ISO 8124-3：2000 玩具安全－第3部分：某些元素的转移SABS ISO 8124-1:2000 Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical PropertiesSABS ISO 8124-2:1994 FlammabilitySABS ISO 8124-3:1997Migration of Certain Elements9.欧盟88/378/EEC 玩具安全法令93/68/EEC CE标记加贴和使用规定EN71-1：1998＋A1：2001＋A2：2000 玩具安全－第1部分：物理和机械性能EN71-2：1993 玩具安全－第2部分：阻燃性能EN71-3：1994＋A1：2000 玩具安全－第3部分：某些元素的转移EN71-4：1990＋A1：1998 玩具安全－第4部分：化学和有关活动用的试验装置EN71-5：1993 玩具安全－第5部分：化学玩具（试验装置除外）EN71-6：1994 玩具安全－第6部分：年龄标志的图形表示EN50088/A1：1996 电动玩具的安全EN71: Part 1; 1998 Safety of Toys Part 1. Specification for Mechanical and Physical PropertiesEN71: Part 2: 1993 Safety of Toys Part 2,Specification for Flammability RequirementsEN71: Part 3: 1994 Safety of Toys Part 3. Speicfication for Migration of Certain ElementsEN71:Part 4:1990 Safety of ToysPart 4. Specification for Experimental Sets for Chemistry and Related Activities and Amendment 1998EN71:Part 5:1993 Safety of Toys Part 5. Chemical Toys (sets) other Than Experimental SetsEN71:Part 6:1995 Safety of Toys Part 6, Graphical Symbol for Age Warning LabelingEuropean Standard EN50088:1996 on the Safety of Electric ToysEN 50088/AI Amendment TO EN50088:1996HD271 SI:1982 Safety of Electrical Toys Council Directive (88/378/EEC) Approximation of the Laws of the Member States Concerning the S Dangerous Imitations DirectiveCouncil Directive (93/68/EEC) Rules for Affixing and Use of the CE Conformity Marking10.中国GB 6675-86 玩具安全要求GB 9832-93 毛绒、布制玩具质量和安全GB 5296.5-96 玩具的标识和使用说明GB 14746-93 儿童自行车安全要求GB 14747-93 儿童三轮车安全要求GB 14748-93 儿童推车安全要求GB 14749-93 婴儿学步车安全要求GB 13472-92 BMX儿童自行车安全要求GB 6675-86 Toy Safety S tandardGB 9832-93 Safety and Quality of Sewn, Plush and Cloth ToysGB 5296.5-96 Labeling and Instructions for Toys玩具和儿童产品安全要求Toys and Children’s Products Safety Regulation (in compliance with ASTM F963, ICTI or EN-71)12.日本日本玩具协会标准玩具安全第1部分：物理和机械性能, 第2部分：阻燃性能, 第3部分：化学性能The Japan Toy Association T 13.马来西亚Safety of ToysMS EN71 Part1:1995 玩具安全－第1部分：物理和机械性能MS ISO8124-2：1999 玩具安全－第2部分：阻燃性能MS EN71 Part3：1998 玩具安全－第3部分：某些元素的转移MS EN71 Part4：1998 玩具安全－第4部分：化学和有关活动用的试验装置MS EN71 Part5：1998 玩具安全－第5部分：化学玩具（试验装置除外）MS EN71 Part 1:1995 (P)Mechanical and Physical PropertiesMS ISO 8124-2:1999FlammabilityMS EN71 Part 3: 1998Migration of Certain E14.墨西哥標準NOM 015/10-SCFI/SSA-1994Toy Safety and Commercial Information - Toy and School Material Safety. Limits on the Bioavaila15.沙特阿拉伯SSA 765-1994 操场设备：第1部分：通用安全要求SSA 1063-1994 玩具和通用安全要求SSA 1064-1995 测试方法第1部分：机械和化学测试SSA 1065－1995 测试方法第2部分：阻燃SSA 1322-1997 低功率射频装置SSA 765-1994 Playground Equipment Part I: General Safety RequirementsSSA 1063-1994 Toys and General Safety RequirementsSSA 1064-1995 Method of Testing Part 1: Mechanical and Chemical TestsSSA 1065-1995 Method of Testing Toys Part 2: FlammabilitySSA 1322-1997 Low Power Radio Frequency Devices16.新加坡Safety of ToysSS 474 PT.1：2000 玩具安全－第1部分：物理和机械性能SS 474 PT.2：2000 玩具安全－第2部分：阻燃性能SS 474 PT.3：2000 玩具安全－第3部分：某些元素的转移SS 474 PT.4：2000 玩具安全－第4部分：化学和有关活动用的试验装置SS 474 PT.5：2000 玩具安全－第5部分：化学玩具（试验装置除外）SS 474 PT.6：2000 玩具安全－第6部分：年龄标志的图形表示SS 474 PT. 1: 2000 Part 1: Mechanical and Physical PropertiesSS 474 PT. 2: 2000 Part 2: FlammabilitySS 474 PT. 3: 2000 Part 3: Migration of Certain ElementsSS 474 PT. 4: 2000Part 4: Experimental Sets for Chemistry and Related ActivitiesSS 474 PT. 5: 2000Part 5: Chemical Toys (sets) Other Than Experimental SetsSS 474 PT. 6: 2000Part 6: Graphical Symbol for Age Warning labeling17.泰国Thai Industrial Standard for Toys TIS 685-2540TIS 685-2540 Part1：1997 玩具安全－第1部分：通用要求TIS 685-2540 Part2：1997 玩具安全－第2部分：包装和标识TIS 685-2540 Part3：1997 玩具安全－第3部分：测试方法和分析TIS 685-2540 Part1: General Requirements (1997)Compulsory Stnd. (effective date 5 January 1999)TIS 685-2540 Part 2: Packages and Labeling (1997)TIS 685-2540 Part 3: Methods of Test & Analysis(1997)二.玩具安全测试常用的欧洲EN71标准为确保产品的安全性，不同地区都制定有安全标准，以便在产品生产的不同阶段实施严格的测试和生产过程控制，其中欧洲标准要算应用范围比较广的一个。
玩具安全标准EN71-1(2011) 物理及机械性能安全标准摘要
玩具安全标准更新E N71-1:2011物理及机械性能安全标准摘要编制 : Q S 部2012年12月前言⏹本欧洲物理及机械性能安全标准 (EN71 Part 1) 于 2011年5月25日由CEN批准。
⏹CEN成员由下列国家(欧洲共同体及欧洲自由贸易联盟国家)的标准化组织组成：奥地利、比利时、保加利亚、克罗地亚、塞浦路斯、捷克共和国、丹麦、爱沙尼亚、芬兰、法国、德国、希腊、匈牙利、冰岛、爱尔兰、意大利、拉脱维亚、立陶宛、卢森堡、马耳他、荷兰、挪威、波兰、葡萄牙、罗马尼亚、斯洛伐克、斯洛文尼亚、西班牙、瑞典、瑞士、英国。
⏹根据CEN内部规则，以上31个国家需执行本欧洲标准。
註: 本摘要只简述与我司玩具设计有关的安规要求, 内容不是整个安全标准的全部。
1 玩具的定义●所谓玩具, 除了是指明显为14岁以下儿童作游玩时使用的产品外, 还包括为儿童而设计, 但不一定专用作玩耍的产品。
例如:附着锁匙扣的小熊公仔、用作装载物件的小猪布袋●一般而言，玩具是针对特定年龄的儿童而设计制造的。
玩具的特性与儿童年龄及发育阶段有关，并且玩具的使用方式是以发掘某些才能为目的。
玩具的范围- 本标准不适用于以下玩具:1. 公用活动场地的设备2. 供公共使用的自动游戏机，不论是否需要放入游戏币3. 装配有内燃机的玩具车4. 玩具蒸汽机5. 投射器和弹射器- 另外, 本标准不包括下列各项, 这些项目不作为玩具考虑:1. 用于节日或庆祝活动的装饰品；2. 向成人收藏者提供的产品，产品或包装上明显标示供14岁及以上的收藏者使用, 如:- 详细及可靠的比例模型- 详细比例模型组装工具包- 民间玩偶和装饰性玩偶及其他类似产品- 具有历史意义的玩具复制品- 真实武器的复制品；3. 体育设备，包括供体重超过20 kg的儿童使用的双排轮滑鞋、单排直列式轮滑鞋、及滑板4. 设计在公路或公共道路上作体育用或旅行用的自行车、单脚滑行车及其他方式的交通工具5. 计划在公路、公共道路或人行道上作为交通工具使用的电动车辆6. 计划在深水区使用的水上设备和向儿童提供的游泳训练装置，如游泳坐圈和游泳辅助用品7. 500块以上的拼图8. 利用压缩空气的玩具枪和手枪，但水枪和射程超过120cm 的弓箭例外9. 烟火，包括非具体针对玩具设计的雷管10. 使用尖锐发射物的产品和游戏，如具有金属点的飞镖组件11. 功能性教育产品，如电烤炉、熨斗或工作额定电压超过24 V的其他功能性产品，专为成人监督下的教育目的而销售12. “功能性产品”指与计划给成人使用的产品、器具或装置一样使用的产品，也可能是这种产品、器具或装置的1个比例模型13. 计划在学校或其他教育框架内，在成人指导员的监督下用于教育目的的产品，如科学设备等14. 如个人电脑和游戏控制器等用于控制互动软件及相关外围设备的电子设备，除非该电子设备或外围设备具体针对儿童设计，具有本身的游戏价值，如特别设计的个人电脑、键盘、游戏手柄或方向盘等15. 互动软件，计划用作娱乐和休闲，如电脑游戏及CD等存储介质16. 婴儿奶嘴17. 吸引儿童的灯具18. 玩具的变压器19. 非玩耍时使用的儿童饰物4 一般要求4.1 材料玩具生产材料应是新材料或是经过处理、使其有害物质不会超过标准要求的材料, 对材料进行评估时, 应用目视进行观察, 要求无污染(不应通过放大镜观察)。
施耐德电气低压配电产品选型指南说明书
ABB EntrelecSommaireBU0402061SNC 160 003 C0205SummarySelection guide ....................................................................................page 1Screw clamp ........................................................................................page 2Feed through and ground terminal blocks .......................................................page 2 - 5 to 10Single pole, multiclamp terminal blocks..........................................................................page 4Feed through terminal blocks - Double-deck................................................................page 11Feed through terminal blocks - Triple-deck...................................................................page 12Three level sensor, terminal blocks without ground connection...................................page 13Three level sensor, terminal blocks with ground connection ........................................page 14Terminal blocks for distribution boxes, double deck + protection .......................page 15 - 16Interruptible terminal blocks for neutral circuit......................................................page 17 - 18Distribution : phase, ground terminal blocks .......................................................page 19 to 21Single pole or four pole distribution blocks..........................................................page 22 to 24Heavy duty switch terminal blocks with blade......................................................page 25 - 26Heavy duty switch terminal blocks with push-turn knob..............................................page 26Heavy duty switch terminal blocks with contact control pull lever...............................page 29Heavy duty switch terminal blocks with blade - Double-deck .....................................page 27Fuse holder terminal blocks for 5x20 mm (.197x.787 in.) and 5x25 mm (.197x.984 in.)or 6.35x25.4 mm (1/4x1 in.) and 6.35x32 mm (1/4x11/4 in.) fuse s.........................................page 28 - 29Fuse holder terminal blocks for 5x20 mm (.197x.787 in.) and 5x25 mm (.197x.984 in.) fuses -Double-dec k.....................................................................................................................page 27Terminal blocks for test circuits with sliding bridge ......................................................page 30Terminal blocks for metering circuits.............................................................................page 31ESSAILEC terminal blocks.............................................................................................page 32Safety connection terminal blocks ................................................................................page 33Miniblocks for EN 50045 (DIN 46277/2) rail ..........................................................page 34 - 35Spring clamp ......................................................................................page 36Angled terminal blocks - Feed through and ground .....................................................page 36Feed through and ground terminal blocks ...........................................................page 37 to 41Feed through terminal blocks - Double deck ................................................................page 42Terminal blocks for sensors / actuators ........................................................................page 42Terminal blocks for distribution boxes...........................................................................page 43Switch terminal blocks for neutral conductor........................................................page 44 - 45Heavy duty switch terminal blocks with blade..............................................................page 46Fuse holder terminal blocks for 5x20 mm (.197x.787 in.) and 5x25 mm (.197x.984 in.) fuse s....page 47Miniblocks Spring clamp ......................................................................................page 48 to 52ADO - Screw clamp ...........................................................................page 53Feed through and ground terminal blocks ...........................................................page 53 to 56Feed through and ground terminal blocks - Double-deck............................................page 57Heavy duty switch terminal blocks with blade..............................................................page 58Fuse holder terminal blocks for 5x20 mm (.197x.787 in.) and 5x25 mm (.197x.984 in.) fuse s ......page 59 - 60Miniblocks ADO - Screw clamp............................................................................page 61 to 65ADO - ADO .........................................................................................page 66Feed through and ground terminal blocks ...........................................................page 66 to 69Feed through and ground terminal blocks - Double-deck............................................page 70Terminal blocks for sensors / actuators ........................................................................page 71Heavy duty switch terminal blocks with blade..............................................................page 72Fuse holder terminal blocks for 5x20 mm (.197x.787 in.) and 5x25 mm (.197x.984 in.) fuse s ......page 73 - 74Miniblocks ADO - ADO .........................................................................................page 75 to 79Accessories ADO ...........................................................................................................page 80Power terminal blocks .............................................................page 81 to 84Quick-connect terminal blocks .................................................page 85 - 86Terminal blocks for railway applications ................................page 87 to 97Pluggable terminal blocks .....................................................page 98 to 100Accessories......................................................................................page 101Marking..................................................................................page 102 to 104GrossAutomation(877)268-3700··*************************PR30PR3.Z2PR3.G2PR5PR4PR1.Z2Rated wire size :Rated wire size :Rated wire size :Rated wire size :Mounting railsShield terminals forcollector barMarking tableHorizontal Rated wire size :0.5 to 16 mm² (22 to 8 AWG)Rated wire size :Rated wire size :Rated wire size :P a g e t o 29e30 t o 32ag e e3P a ge 8 t o 60a g e6t o 6574P a ge 7 t o 79P a ge 9P a g P a gGrossAutomation(877)268-3700··*************************2ABB Entrelecd010830402051SNC 160 003 C0205MA 2,5/5 - 2.5 mm² blocks - 5 mm .200" spacingAccessoriesGrossAutomation(877)268-3700··*************************3ABB Entrelec D010740402051SNC 160 003 C0205M 4/6 - 4 mm² blocks - 6 mm .238" spacingAccessoriesGrossAutomation(877)268-3700··*************************4ABB EntrelecD011030402051SNC 160 003 C0205M 4/6.3A - 4 mm² blocks - 6 mm .238" spacingM 4/6.4A - 4 mm² blocks - 6 mm .238" spacingGrossAutomation(877)268-3700··*************************5ABB Entrelec D010840402051SNC 160 003 C0205M 6/8 - 6 mm² blocks - 8 mm .315" spacingAccessoriesGrossAutomation(877)268-3700··*************************6ABB EntrelecD010850402051SNC 160 003 C0205M 10/10 - 10 mm² blocks - 10 mm .394" spacingAccessoriesGrossAutomation(877)268-3700··*************************7ABB Entrelec D010860402051SNC 160 003 C0205M 16/12 - 16 mm² blocks - 12 mm .473" spacingAccessoriesGrossAutomation(877)268-3700··*************************8ABB EntrelecD010870402051SNC 160 003 C0205M 35/16 - 35 mm² blocks - 16 mm .630" spacingGrossAutomation(877)268-3700··*************************M 95/26 - 95 mm² blocks - 26 mm 1.02" spacingM 70/22.P - 70 mm² ground block with rail contact - 22 mm .630" spacingSelection35 mm / 1.37"12 mm / 0.47"14-30 Nm / 124-260 Ib.in 1.2-1.4 Nm / 10.6-12.3 Ib.in1000600600415400400577070240 mm 2500 MCM 500 MCM 10 mm 2 6 AWG 6 AWG IEC UL CSANFC DIN0.5 - 160.5 - 100 AWG-600 MCM 2 AWG-500 MCM 50 - 30035 - 24018-6 AWGD 150/31.D10 - 150 mm² blocks - 31 mm 1.22" spacingCharacteristicsD 240/36.D10 - 240 mm² blocks - 36 mm 1.41" spacingSelectionWire size main circuit mm² / AWG VoltageV Current main circuit A Current outputARated wire size main circuit mm² / AWG Rated wire size outputmm² / AWG Wire stripping length main circuit mm / inches Wire stripping length output mm / inches Recommended torque main circuit Nm / Ib.in Recommended torque outputNm / Ib.inSolid Stranded Solid Stranded Wire size output mm² / AWG9.5 mm / .37"0.5-0.8 Nm / 4.4-7.1 Ib.in5003003003220204 mm 212 AWG12 AWG0.2 - 422-12 AWG 22-12 AWG 0.22 - 4IEC ULCSANFC DINCharacteristicsWire size mm² / AWGSolid Stranded D 4/6.T3 - 4 mm² blocks - 6 mm .238" spacingSelectionVoltage V CurrentARated wire sizemm² / AWG Wire stripping length mm / inches Recommended torqueNm / Ib.inM 4/6.T3.P - 4 mm² block - 6 mm .238" spacingD 2,5/6.D - 2.5 mm² blocks - 6 mm .238" spacingD 2,5/6.DL - 2.5 mm² blocks - 6 mm .238" spacingD 2,5/6.DPA1 - 2.5 mm² blocks - 6 mm .238" spacingD 2,5/6.DPAL1 - 2.5 mm² blocks - 6 mm .238" spacingD 4/6... - 4 mm² blocks - 6 mm .238" spacingD 4/6.LNTP - 4 mm² closed blocks - 17.8 mm .700" spacingMA 2,5/5.NT- 2.5 mm² block - 5 mm .200" spacingAccessories**SFB2 : 16 to 35 mm² 6 to 2 AWG H= 3 mm/.12"M 10/10.NT- 10 mm² block - 10 mm .394" spacingAccessories(1) Except for M 35/16 NT (closed block)*SFB1 : 0.5 to 35 mm² 18 to 2 AWG H= 7 mm/.28"**SFB2 : 16 to 35 mm² 6 to 2 AWG H= 3 mm/.12"MB 4/6... - 4 mm² blocks - 6 mm .238" spacingMB 6/8... - 6 mm² blocks - 8 mm .315" spacingMB 10/10... - 10 mm² blocks - 10 mm .394" spacingBRU 125 A - 35 mm² block - 27 mm 1.063" spacingBRU 160 A - 70 mm² block - 35.2 mm 1.388" spacingBRU 250 A - 120 mm² blocks - 44.5 mm 1.752" spacingBRU 400 A - 185 mm² block - 44.5 mm 1.752" spacingAccessoriesAccessoriesBRT 80 A - 16 mm² block - 48 mm 1.89" spacingBRT 125 A - 35 mm² block - 48 mm 1.89" spacingBRT 160 A - 50 mm² block - 50 mm 1.97" spacing9.5 mm / .37"0.5-0.6 Nm / 4.4-5.3 Ib.in4003003002010104 mm 210 AWG 12 AWG 0.5 - 422-10 AWG20-12 AWG0.5 - 2.5IEC ULCSANFC DINMA 2,5/5.SNB - 2.5 mm² blocks - 5 mm .200" spacingCharacteristicsM 4/6.SNB - 4 mm² blocks - 6 mm .238" spacingSelectionWire size mm² / AWGVoltage V CurrentARated wire sizemm² / AWG Wire stripping length mm / inches Recommended torqueNm / Ib.inSolid StrandedM 6/8.SNB - 6 mm² blocks - 8 mm .315" spacing - blade switchingSelectionAccessoriesM 4/8.D2.SF - for fuses 5x20 mm .197x.787 in. and 5x25 mm .197x.984 in. -4 mm² blocks - 8 mm .315" spacingM 4/6.D2.SNBT - 4 mm² blocks - 6 mm .238" spacing - blade switchM 4/8.SF- 4 mm² blocks - 8 mm .315" spacingM 4/8.SFL - 4 mm² blocks - 8 mm .315" spacing12 mm / .472"1.2-1.4 Nm / 10.6-12.3 Ib.in800(1)60060016252510 mm 210 AWG8 AWG0.5 - 1622-10 AWG 22-8 AWG 0.5 - 10IEC ULCSANFC DINCBD2SML 10/13.SF - for fuses 6.35x25.4 mm 1/4x1 in. and 6.35x32 mm 1/4x11/4 in. -10 mm² blocks - 13 mm .512" spacingSelectionAccessoriesCharacteristicsWire size mm² / AWGVoltage V CurrentARated wire sizemm² / AWG Wire stripping length mm / inches Recommended torqueNm / Ib.inSolid Stranded (1) Insulation voltage of terminal block - operating voltage : according to fuse.M 4/6.D2.2S2... - 4 mm² blocks - 6 mm .238" spacing11 mm / .43"0.8-1 Nm / 7.1-8.9 Ib.in50060030306 mm 28 AWG0.5 - 1022-8 AWG0.5 - 6IECULCSANFC DINM 6/8.ST... - 6 mm² blocks - 8 mm .315" spacingCharacteristicsWire size mm² / AWGVoltage V CurrentARated wire sizemm² / AWG Wire stripping length mm / inches Recommended torqueNm / Ib.inSolid Stranded M 6/8.STA - 6 mm² blocks - 8 mm .315" spacing(3)Only for M 6/8.STAM 4/6.ST- 4 mm² blocks - 6 mm .236" spacingBNT...PC...(2) Only for M10/10.ST-SnThe PREM IUM solution for testing the secondary circuits of current or voltage transformers.ESSAILEC, approved by the major electricity utilities, remains the premium choice for the energy market.Implemented in the transformers secondary circuits, ESSAILEC thanks to its intelligent “make before break” design eases and secures any intervention. Cutting the energy supply is avoided with zero risk for the operator.The plug and socket connection cuts cost installation as well as in-situ wiring errors. ESSAILEC is ideal for the wiring of sub-assemblies in the secondary circuits.ESSAILEC terminal blocksProtection relays,Protection relays,Testing :The ESSAILEC socket supplies energy to the protection or counting devices. The insertion of the test plug, which is connected to the measurement equipment, allows the testing of the devices, without perturbing the circuit.ESSAILEC blocks are well adapted to current or voltage measurement :-Current sockets with make before break contacts and pre-wired test plug for current measures-Voltage sockets with open contacts and pre-wired test plug for voltage measures-Up to 4 ammeters or 4 voltmeters connected to the test plugDistributing :The ESSAILEC plug is continuously mounted on the socket to supply current or voltage to secondary circuits sub assemblies.ESSAILEC blocks extreme versatility allow :-Safe current distribution with current socket with mobile contacts since the secondary circuit is not cut when plug is removed-Voltage or polarity distribution with dedicated voltage or polarity socket with closed contactESSAILEC is designed to offer :Great flexibility :-Connection multi contacts « plug and play »-Panel, rail, rack fixed mounting or stand-alone connector -Two wiring technologies, up to 10 mm²Extreme reliability :-Non symmetric blocks -Coding accessories -IP20 design -Locking system -Sealed coverR S T NFor technical characteristics and complete part numbers list, please ask for the ESSAILEC catalog10005006003225254 mm 21.65 mm²12 AWG 13 mm / .51"IECB.SCSANFC DINTS 50-180.5 - 0.8 Nm /4.4 - 7.1 Ib.in0.2 - 422-12 AWG0.22 - 40.5 - 1.50.28 - 1.6580050060041252562.512 AWG 13 mm / .51"0.8 - 1 Nm / 7.1 - 8.9 Ib.inIECB.S CSANFC DINTS 50-180.5 - 1020-12 AWG0.5 - 60.28 - 2.590050060046406510 mm 26 mm² 6 AWG 14 mm / .55"IECB.S UL/CSANFC DINTS 50-181.2 - 1.4 Nm / 10.6 - 12.3 Ib.in0.5 - 1620 - 6 AWG0.5 - 100.28 - 6M 4/6.RS - 4 mm² blocks - 6 mm .238" spacingCharacteristicsWire size mm² / AWGVoltage V CurrentARated wire sizemm² / AWG Wire stripping lengthmm / inches Recommended torque (screw)Nm / Ib.inSolid wire Stranded wire Solid wire Stranded wire Screw clampLugsM 6/8.RS - 6 mm² blocks - 8 mm .315" spacingCharacteristicsWire size mm² / AWGVoltage V CurrentARated wire sizemm² / AWG Wire stripping lengthmm / inches Recommended torque (screw)Nm / Ib.inSolid wire Stranded wire Solid wire Stranded wire Screw clampLugspending M 10/10.RS - 10 mm² blocks - 10 mm .394" spacingCharacteristicsWire size mm² / AWGVoltage V CurrentARated wire sizemm² / AWG Wire stripping lengthmm / inches Recommended torque (screw)Nm / Ib.inSolid wire Stranded wire Solid wire Stranded wire Screw clampLugspending SelectionAccessories(1) Only for block M 4/6.RS (4) For blocks M 4/6.RS and M 6/8.RS(2) Only for block M 6/8.RS(3) Only for block M 10/10.RSDR 1,5/4 - 1.5 mm² blocks - 4 mm .157" spacingDR 1,5/5... - 1.5 mm² blocks - 5 mm .200" spacing。
【网站测试报告】通用版-网站压力测试报告模板
网站压力测试报告模板***项目压力测试报告XXXXXX 有限公司撰稿人：时间：年月日目录1．测试项目：.................................................................................................................................2 1．1 功能描述：......................................................................................................................2 1．2 测试项目描述：..............................................................................................................2 2．测试环境：.................................................................................................................................3 2．1 服务器端测试环境描述：.............................................................................................3 2．2 客户端测试环境描述：.................................................................................................3 2．3 网络测试环境描述：.....................................................................................................3 3．测试人与测试时间：.................................................................................................................4 4．测试案例的测试结果：...........................................................................错误！未定义书签。
EN71-1(2007.10.22)
14
4. 一般要求
4.12 气球
-
对于橡胶质料气球，包装盒上应注明警告语句,
-
对于天然橡胶制成的气球应加“由天然橡胶制成”说明;
Warning! Children under eight years can choke or suffocate on uninflated or broken balloons. Adult supervision required. Keep uninflated balloons From children. Discard broken balloons at once.
11
4. 一般要求
4.10.3 铰链
- 若玩具的两部份是用一个或几个铰链连接， 其铰链间的空隙任何位置都不得在5mm至12mm之间 - 连接铰链的任何一部分小于250克除外
12
4. 一般要求
4.10.4 弹簧
下列弹簧必须不可触及: - 螺旋状弹簧的两个螺线之间的空隙大于3mm时
- 拉伸弹簧在40N拉力作用下，两相邻弹簧间距离大于3mm
1
EN71-1:2005+A3 第一部分 物理机械性能
~ 此译文仅供参考，如有异议请以原文为准 ~
2
EN71 -1 物理机械性能
Scope 范围 Normative References 参考标准 Definitions 定义 General Requirements 一般要求 Toys intended for children under 36 months 三岁以下儿童玩具 6. Packaging 包装 7. Warnings and instructions for use 警告及说明书 8. Test Methods 测试方法 1. 2. 3. 4. 5.
出厂验收测试FAT
Supplier 制造商
嘉华通软
工厂测试方案
二、 确认内容................................................................................................................................................... 6 II. Content of confirmation.................................................................................................................................. 6 (Ⅰ) 文件检查 .................................................................................................................................................... 6 (Ⅰ) Document inspection ................................................................................................................................... 6 （二）配置检查................................................................................................................................................. 8 （Ⅱ）Configuration inspection ......................................................................................................................... 8
TUV测试报告(EN71-1-2-3 AZO 6p
The submitted sample was identified and described by client as:1.Test in accordance with EN71-1 : 2011Mechanical and Physical Properties2. Test in accordance with EN 71- 2 : 2011 Flammability3. Test in Accordance with EN 71- 3 : 1994 with amendment A1:2000 / AC:2002 – Migration of certain elements.4. Phthalates Content TestDBP, BBP, DEHP, DINP, DNOP and DIDP Phthalate Content Test– Entry 51/52 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No1907/2006 (previously restricted under Direc-tive 2005/84/EC).5. Azo-Dye Test– Entry 43 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No1907/2006.Test Method:Please refer to next page(s).64.161.12.0281.01This report is the resultof a single examination of the object in question and is not generally applicable evaluation of the quality of other products in regular production.PASS002Red fabric003Blue fabric004White fabric net005White Velcro006Multicolor printed white label2Order2.1 Date of Purchase Order2012-05-212.2 Receipt of Test Sample, Location2012-05-21, 2012-06-04, 2012-06-06, Guangzhou2.3 Date of Testing2012-05-22 to 2012-05-30, 2012-06-04 to 2012-06-05, 2012-06-06 to 2012-06-062.4 Location of TestingThe test was performed in Jiangsu TÜV Product Service Ltd. Shenzhen Branch and thetest results were reviewed at Jiangsu TÜV Product Service Ltd. Guangzhou Branch.NNFFT Remark*4General requirements4.1Material cleanliness C4.7Edges C4.8Points and metallic wires C4.14Enclosures C7Warnings, markings and instructions for use#7.1General C7.2Toys not intended for children under 36 months C^Remarks# =As per Directive 2009/48/EC, the following marking shall be fulfilled.- The CE marking shall be affixed visibly, legibly and indelibly to the toy, to an affixed label or to the packaging, in counter display which shall be subject to the general principles set out inArticle 30 of Regulation (EC) No 765/2008.- The manufacturer’s name and address, importer’s name and address in EEC shall be indicated on the toy or, where that is not possible, on its packaging or in a document accompanying thetoy.- The toys bear a type, batch, serial or model number or other element allowing their identification, or where the size or nature of the toy does not allow it, that the requiredinformation is provided on the packaging or in a document accompanying the toy.- The toy shall be, if applicable, accompanied by instructions and safety information in a language or languages easily understood by consumers, as determined by the Member Stateconcerned.* Abbreviation : C = Complied;^ : Retest sample was received on 2012-06-06T Remark*4.1General C4.4Toys intended to be entered by a child C^Remarks* Abbreviation : C=Complied^ : Retest sample was received on 2012-06-063.3 Migration of certain elements test with reference to EN71 Part 3:1994 + A1: 2000/AC: 2002 - Migration of certain elements.As stated in the above specifications. Heavy metal analysis was determined by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES).ElementsResult [mg/kg]MaximallypermissibleLimits[mg/kg] 001002003004005006Soluble Antimony < 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.060 Soluble Arsenic 2.5 2.5 2.5 2.5 2.5 2.5Soluble Barium< 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.01000 Soluble Cadmium < 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.075 Soluble Chromium 5.0 5.0 5.0 5.0 5.0 5.0Soluble Lead 5.0 5.0 5.0 5.0 5.0 5.0Soluble Mercury< 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.060 Soluble Selenium < 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.0500 Note:“mg/kg”denotes milligram per kilogram<”denotes “less than”ement001+002004+006005Detection Limit+003Dibutyl Phthalate(DBP)N.D.N.D.N.D.0.005% Benzylbutyl Phthalate(BBP)N.D.N.D.N.D.0.005%Di(2-ethylhexyl) Phthalate (DEHP)N.D.N.D.N.D.0.005% Total (DBP+BBP+DEHP)< 0.1%< 0.1%< 0.1%---Diisononyl Phthalate(DINP)N.D.N.D.N.D.0.005%Di-n-octyl Phthalate(DNOP)N.D.N.D.N.D.0.005% Diisodecyl Phthalate(DIDP)N.D.N.D.N.D.0.005% Total (DINP+DNOP+DIDP)< 0.1%< 0.1%< 0.1%---Note :1. “N.D.” = “Not Detected”2. “<” = “Less than”3. “%” means “percentage by weight”For reference:Entry 51/52 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC)No 1907/2006 (previously restricted under Directive 2005/84/EC):For DBP, BBP, DEHP(1)Shall not be used as substances or in mixtures, in concentrations greater than 0,1 % byweight of the plasticised material, in toys and childcare articles.(2) Toys and childcare articles containing these phthalates in a concentration greater than0,1 % by weight of the plasticised material shall not be placed on the market.For DINP, DNOP, DIDP(1) Shall not be used as substances or in mixtures, in concentrations greater than 0,1 % byweight of the plasticised material, in toys and childcare articles which can be placed in themouth by children.(2) Such toys and childcare articles containing these phthalates in a concentration greater than0,1 % by weight of the plasticised material shall not be placed on the market.Result [mg/kg]Result [mg/kg]001+002+003601 4-aminobiphenyl92-67-102 Benzidine92-87-503 4-chloro-o-toluidine95-69-204 2-naphthylamine91-59-805 o-aminoazotoluene97-56-306 5-nitro-o-toluidine99-55-807 4-chloroaniline106-47-808 2,4-diaminoanisole615-05-4< 5< 509 4,4'-diaminodiphenylmethane101-77-910 3,3'-dichlorobenzidine91-94-111 3,3'-dimethoxylbenzidine119-90-412 3,3'-dimethylbenzidine119-93-713 4,4'-methylenedi-o-toluidine838-88-014 p-cresidine120-71-815 4,4'-methylene-bis-(2-chloro-aniline)101-14-416 4,4'-oxydianiline101-80-417 4,4'-thiodianiline139-65-118 o-toluidine95-53-419 2,4-toluenediamine95-80-7< 5< 520 2,4,5-trimethylaniline137-17-721 4-aminoazobenzene *60-09-322 2-methoxyaniline90-04-023 2,4-xylidine95-68-124 2,6-xylidine87-62-7MethodLimitConclusionNote: 1.“<” = “less than”2. All concentrations express in “mg/kg”(milligram per kilogram), mg/kg ~ ppmVic Zheng。
各国玩家检测标准中文版
/
（ASTM D4236） ）
• 凡去美国的货物，产品中有Art Materials者， 凡去美国的货物，产品中有Art Materials者 如墨水笔，彩笔或画等，必须合符LHAMA LHAMA之规 如墨水笔，彩笔或画等，必须合符LHAMA之规 定及标准。 定及标准。 (如墨水笔或颜料当中之含量可能 有致癌物质， 有致癌物质，导致皮肤敏感或因长期接触使用 而令身体健康受到影响) 而令身体健康受到影响)
• EN50088是欧共体订立的电动玩具产品之 EN50088是欧共体订立的电动玩具产品之 安全标准， 安全标准，所要求之品质及安全标准所 涉及之范围广。 涉及之范围广。
电动玩具安全测试 EN50088
• 该标准包括所有电动玩具，还适用于电器 结构装置（Electric Construction Sets）、电 器功能玩具（Electric Functional Toys），或 电气实验装置（Experimental Sets）但与玩 具配套使用的变压器、充电器，则不能当作 玩具，必须使用相应的电气安全标准。 EN50088主要检测内容包括：标志和说明， 输入功率，温升及非正常操作，电气强度， 机械强度，结构，电线、螺丝及元器件，爬 电距离和电气间隙，防火、耐热。有毒以及 类似危害等。
EMC Electromagnetic Compatibility 电磁兼容指令 EMC指令（89/336/EEC） 指令（ 指令 ）
• 欧共体（现称欧盟）在EMC标准和认证领域，于 欧共体（现称欧盟） 标准和认证领域， 标准和认证领域 1989年颁布了 年颁布了89/336/EMC指令（此后又被 指令（ 年颁布了 指令 两次修改， 两次修改，即92/31/EEC及93/68/EEC）， 及 ）， 使得EMC性能成为了有 使得 性能成为了有EMC要求的产品进入欧 要求的产品进入欧 性能成为了有 盟统一市场的条件。 盟统一市场的条件。 • 凡去欧共体的国家之玩具产品，如遥控车、对讲 凡去欧共体的国家之玩具产品，如遥控车、 机等，会发出电磁波之玩具，其测试标准及规格， 机等，会发出电磁波之玩具，其测试标准及规格， 必须合符EMC之规定及要求。 EMC之规定及要求 必须合符EMC之规定及要求。设备或系统在其电 磁环境中能正常工作且不对该环境中任何事物构 成不能承受的电磁骚扰的能力。 成不能承受的电磁骚扰的能力。
通用路由平台 VRP 说明书 QoS 分册
目录第1章 QoS简介.....................................................................................................................1-11.1 简介....................................................................................................................................1-11.2 传统的分组投递业务..........................................................................................................1-11.3 新业务引发的新需求..........................................................................................................1-21.4 拥塞的产生、影响和对策...................................................................................................1-21.4.1 拥塞的产生..............................................................................................................1-21.4.2 拥塞的影响..............................................................................................................1-31.4.3 对策.........................................................................................................................1-31.5 几种主要的流量管理技术...................................................................................................1-4第2章流量监管和流量整形配置............................................................................................2-12.1 简介....................................................................................................................................2-12.1.1 流量监管..................................................................................................................2-12.1.2 流量整形..................................................................................................................2-32.1.3 接口限速..................................................................................................................2-52.2 配置流量监管.....................................................................................................................2-62.2.1 建立配置任务...........................................................................................................2-62.2.2 配置流量监管列表....................................................................................................2-72.2.3 配置流量监管策略....................................................................................................2-72.2.4 检查配置结果...........................................................................................................2-72.3 配置流量整形.....................................................................................................................2-82.3.1 建立配置任务...........................................................................................................2-82.3.2 配置流量整形...........................................................................................................2-82.3.3 检查配置结果...........................................................................................................2-92.4 配置接口限速.....................................................................................................................2-92.4.1 建立配置任务...........................................................................................................2-92.4.2 配置接口限速.........................................................................................................2-102.4.3 检查配置结果.........................................................................................................2-102.5 配置举例...........................................................................................................................2-102.5.1 流量监管配置示例..................................................................................................2-102.5.2 流量整形配置示例..................................................................................................2-12第3章拥塞管理配置..............................................................................................................3-13.1 简介....................................................................................................................................3-13.1.1 拥塞管理策略...........................................................................................................3-13.1.2 拥塞管理技术的对比................................................................................................3-53.2 配置先进先出队列..............................................................................................................3-63.2.1 建立配置任务...........................................................................................................3-63.2.2 配置FIFO队列的长度.............................................................................................3-73.3 配置优先队列.....................................................................................................................3-73.3.1 建立配置任务...........................................................................................................3-73.3.2 配置优先列表...........................................................................................................3-83.3.3 配置缺省队列...........................................................................................................3-93.3.4 配置队列长度...........................................................................................................3-93.3.5 在接口上应用优先列表组.........................................................................................3-93.3.6 检查配置结果.........................................................................................................3-103.4 配置定制队列...................................................................................................................3-103.4.1 建立配置任务.........................................................................................................3-103.4.2 配置定制列表.........................................................................................................3-113.4.3 配置缺省队列.........................................................................................................3-113.4.4 配置队列长度.........................................................................................................3-123.4.5 配置各队列每次轮询发送的字节数........................................................................3-123.4.6 在接口上应用定制列表..........................................................................................3-123.4.7 检查配置结果.........................................................................................................3-133.5 配置加权公平队列............................................................................................................3-133.5.1 建立配置任务.........................................................................................................3-133.5.2 配置加权公平队列..................................................................................................3-143.5.3 检查配置结果.........................................................................................................3-143.6 配置RTP队列..................................................................................................................3-143.6.1 建立配置任务.........................................................................................................3-143.6.2 在接口上应用RTP队列.........................................................................................3-153.6.3 配置最大预留带宽..................................................................................................3-163.6.4 检查配置结果.........................................................................................................3-163.7 优先队列配置举例............................................................................................................3-16第4章拥塞避免配置..............................................................................................................4-14.1 简介....................................................................................................................................4-14.2 配置WRED........................................................................................................................4-34.2.1 建立配置任务...........................................................................................................4-34.2.2 启用WRED............................................................................................................4-44.2.3 配置WRED计算平均队长的指数............................................................................4-44.2.4 配置WRED各优先级参数.......................................................................................4-44.2.5 检查配置结果...........................................................................................................4-5第5章基于类的QoS配置.....................................................................................................5-15.1 简介....................................................................................................................................5-15.1.1 流分类......................................................................................................................5-25.1.2 标记.........................................................................................................................5-25.1.3 DSCP......................................................................................................................5-35.1.4 标准的PHB.............................................................................................................5-35.1.5 基于类的队列CBQ（Class Based Queue）..........................................................5-4 5.2 配置流分类.........................................................................................................................5-45.2.1 建立配置任务...........................................................................................................5-45.2.2 在类视图中定义匹配类的规则.................................................................................5-55.2.3 检查配置结果...........................................................................................................5-6 5.3 配置基于类的标记动作.......................................................................................................5-75.3.1 建立配置任务...........................................................................................................5-75.3.2 配置标记报文的DSCP值........................................................................................5-85.3.3 配置标记报文的IP优先级值...................................................................................5-85.3.4 配置标记FR报文的DE标志位的值........................................................................5-85.3.5 配置标记ATM信元的CLP标志位的值...................................................................5-85.3.6 配置标记MPLS EXP域的值...................................................................................5-95.3.7 配置标记VLAN优先级8021P的值.........................................................................5-9 5.4 配置基于类的流量监管和流量整形动作.............................................................................5-95.4.1 建立配置任务...........................................................................................................5-95.4.2 配置基于类的流量监管动作...................................................................................5-105.4.3 配置基于类的流量整形动作...................................................................................5-105.4.4 检查配置结果.........................................................................................................5-11 5.5 配置基于类的流量限速动作..............................................................................................5-115.5.1 建立配置任务.........................................................................................................5-115.5.2 配置基于类的流量限速动作...................................................................................5-125.5.3 检查配置结果.........................................................................................................5-12 5.6 配置CBQ动作.................................................................................................................5-125.6.1 建立配置任务.........................................................................................................5-125.6.2 配置AF..................................................................................................................5-135.6.3 配置WFQ..............................................................................................................5-135.6.4 配置最大队列长度..................................................................................................5-145.6.5 配置EF.................................................................................................................5-145.6.6 检查配置结果.........................................................................................................5-14 5.7 配置基于类的WRED动作...............................................................................................5-155.7.1 建立配置任务.........................................................................................................5-155.7.2 配置基于类的WRED丢弃方式.............................................................................5-155.7.3 配置基于类的WRED的丢弃参数.........................................................................5-165.7.4 检查配置结果.........................................................................................................5-16 5.8 配置流量策略...................................................................................................................5-175.8.1 建立配置任务.........................................................................................................5-175.8.2 定义策略并进入策略视图.......................................................................................5-175.8.3 为流分类指定流动作..............................................................................................5-185.8.4 检查配置结果.........................................................................................................5-185.9 配置策略嵌套动作............................................................................................................5-185.9.1 建立配置任务.........................................................................................................5-185.9.2 配置策略嵌套动作.................................................................................................5-195.9.3 检查配置结果.........................................................................................................5-205.10 应用策略.........................................................................................................................5-205.10.1 建立配置任务.......................................................................................................5-205.10.2 应用策略..............................................................................................................5-215.10.3 检查配置结果.......................................................................................................5-215.11 调试CBQ.......................................................................................................................5-215.12 配置举例.........................................................................................................................5-225.12.1 基于类的队列配置举例........................................................................................5-225.12.2 策略嵌套配置举例...............................................................................................5-26第6章 QPPB配置..................................................................................................................6-16.1 简介....................................................................................................................................6-16.2 配置QPPB.........................................................................................................................6-26.2.1 建立配置任务...........................................................................................................6-26.2.2 配置路由策略...........................................................................................................6-36.2.3 应用路由策略...........................................................................................................6-46.2.4 定义类及类的匹配规则............................................................................................6-46.2.5 配置基于类的动作....................................................................................................6-46.2.6 定义流量策略...........................................................................................................6-46.2.7 在接口下应用流量策略............................................................................................6-46.2.8 在接口下应用QPPB................................................................................................6-56.2.9 检查配置结果...........................................................................................................6-56.3 QPPB配置举例..................................................................................................................6-56.4 故障排除...........................................................................................................................6-11第7章链路效率机制配置.......................................................................................................7-17.1 简介....................................................................................................................................7-17.1.1 IP报文头压缩..........................................................................................................7-17.1.2 链路分片与交叉.......................................................................................................7-27.2 配置IP报文头压缩.............................................................................................................7-37.2.1 建立配置任务...........................................................................................................7-37.2.2 启动IP头压缩........................................................................................................7-47.2.3 配置TCP头压缩的最大连接数................................................................................7-47.2.4 配置RTP头压缩的最大连接数................................................................................7-57.2.5 检查配置结果...........................................................................................................7-57.3 配置链路分片和交叉..........................................................................................................7-57.3.1 建立配置任务...........................................................................................................7-57.3.2 使能LFI..................................................................................................................7-67.3.3 配置LFI分片的最大时延........................................................................................7-67.3.4 配置MP绑定带宽....................................................................................................7-67.3.5 启动VT接口动态QoS的限速功能.........................................................................7-77.4 维护....................................................................................................................................7-77.4.1 调试IP头压缩.........................................................................................................7-77.4.2 清空压缩运行信息....................................................................................................7-8第8章帧中继QoS配置.........................................................................................................8-18.1 简介....................................................................................................................................8-18.1.1 帧中继class............................................................................................................8-28.1.2 实现的帧中继QoS...................................................................................................8-28.2 配置帧中继流量整形..........................................................................................................8-58.2.1 建立配置任务...........................................................................................................8-58.2.2 配置帧中继流量整形参数.........................................................................................8-68.2.3 将整形参数应用到接口............................................................................................8-78.2.4 使能帧中继流量整形................................................................................................8-78.3 配置帧中继流量监管..........................................................................................................8-88.3.1 建立配置任务...........................................................................................................8-88.3.2 配置帧中继流量监管参数.........................................................................................8-98.3.3 将流量监管参数应用到接口.....................................................................................8-98.3.4 使能帧中继流量监管................................................................................................8-98.4 配置帧中继接口的拥塞管理..............................................................................................8-108.4.1 建立配置任务.........................................................................................................8-108.4.2 配置帧中继接口的拥塞管理策略............................................................................8-108.5 配置帧中继虚电路的拥塞管理..........................................................................................8-118.5.1 建立配置任务.........................................................................................................8-118.5.2 配置帧中继虚电路的拥塞管理策略........................................................................8-128.5.3 配置虚电路的DE规则...........................................................................................8-128.5.4 将拥塞策略应用到虚电路.......................................................................................8-138.6 配置帧中继通用队列........................................................................................................8-138.6.1 建立配置任务.........................................................................................................8-138.6.2 配置帧中继通用队列..............................................................................................8-148.6.3 将通用队列应用到帧中继接口...............................................................................8-158.6.4 将通用队列应用到帧中继虚电路............................................................................8-158.6.5 检查配置结果.........................................................................................................8-158.7 配置帧中继PVC PQ队列................................................................................................8-168.7.1 建立配置任务.........................................................................................................8-168.7.2 配置帧中继接口的PVC PQ队列...........................................................................8-168.7.3 配置帧中继虚电路PVC PQ队列等级....................................................................8-178.8 配置帧中继分片................................................................................................................8-188.8.1 建立配置任务.........................................................................................................8-188.8.2 配置帧中继分片.....................................................................................................8-198.8.3 将帧中继分片应用到虚电路...................................................................................8-198.8.4 检查配置结果.........................................................................................................8-198.9 调试帧中继QoS...............................................................................................................8-208.10 配置举例.........................................................................................................................8-208.10.1 帧中继流量整形配置举例.....................................................................................8-208.10.2 帧中继分片配置举例............................................................................................8-22第9章 ATM QoS配置............................................................................................................9-19.1 简介....................................................................................................................................9-19.2 配置ATM PVC的拥塞管理................................................................................................9-29.2.1 建立配置任务...........................................................................................................9-29.2.2 配置ATM PVC的FIFO队列...................................................................................9-39.2.3 配置ATM PVC的CQ队列.....................................................................................9-49.2.4 配置ATM PVC的PQ队列......................................................................................9-49.2.5 配置ATM PVC的WFQ队列..................................................................................9-49.2.6 应用CBQ................................................................................................................9-49.2.7 配置ATM PVC的RTPQ队列.................................................................................9-59.2.8 配置ATM PVC的预留带宽.....................................................................................9-59.3 配置ATM PVC的拥塞避免................................................................................................9-59.3.1 建立配置任务...........................................................................................................9-59.3.2 配置ATM PVC的拥塞避免.....................................................................................9-69.4 配置ATM接口的流量监管.................................................................................................9-79.4.1 建立配置任务...........................................................................................................9-79.4.2 配置ATM接口的流量监管.......................................................................................9-79.5 配置ATM接口基于类的策略..............................................................................................9-89.5.1 建立配置任务...........................................................................................................9-89.5.2 配置ATM接口基于类的策略...................................................................................9-99.6 配置PVC业务映射............................................................................................................9-99.6.1 建立配置任务...........................................................................................................9-99.6.2 配置PVC-Group内PVC的IP优先级..................................................................9-109.6.3 为PVC-Group内创建的PVC配置流量参数.........................................................9-109.7 Multilink PPPoA QoS配置...............................................................................................9-119.7.1 建立配置任务.........................................................................................................9-119.7.2 创建Multilink PPPoA虚拟接口模板......................................................................9-129.7.3 创建PPPoA虚拟接口模板并绑定到Multilink PPPoA...........................................9-129.7.4 配置PPPoA应用...................................................................................................9-129.7.5 在Multilink PPPoA虚拟接口模板上应用QoS策略...............................................9-129.7.6 重启PVC...............................................................................................................9-139.8 配置举例...........................................................................................................................9-139.8.1 ATM PVC上的CBQ配置举例..............................................................................9-13。
诺基亚智能手机使用指南说明书
C
Capacities Chart .................... 344, 346 Carbon Monoxide Hazard .............. 52 Carrying Cargo .............................. 202 Cassette Player
Charging System Indicator .... 58, 328 Checklist, Before Driving............. 206 Child Safety ...................................... 20 Child Seats........................................ 25
Before Driving ............................... 191 Belts, Seat ..................................... 8, 41 Beverage Holder............................ 101 Body Repair .................................... 310
Maintenance............................... 279 Usage .................................. 111, 117 Air Outlets (Vents)................ 110, 115 Air Pressure, Tires ........................ 282 Alcohol in Gasoline........................ 350 Aluminum Wheels, Cleaning........ 305 Antifreeze ....................................... 253 Anti-lock Brakes (ABS) Indicator................................ 59, 219 Operation .................................... 218 Anti-theft, Audio System............... 179 Anti-theft Steering Column Lock .. 76
产品规格书完整
NO.:PS091101上海徕木电子股份有限公司SHANGHAI LAIMU ELECTRONICS CO., LTD.产品规格书PRODUCT SPECIFICATION顾客：Client：产品名称：Connector Product Name:产品编码：/Part Number版本号：/ Version Number：制定审核EditCheck上海市松江区洞泾镇洞薛路651弄88号徕木：Laimu：Auto Meter Connector（汽车仪表连接器）SEE TABLE/批准Approval邮编：201619上海徕木电子股份有限公司SHANGHAI LAIMU ELECTRONICS CO., LTD.编 号PS091101Serial Number 产品规格书Product Specification目版本号/ Version Number 产品名称 Connector Product Name 产品编码 See TablePart Number录CONTENT0更改记录........................................................................................................................................3 1产品描述Product description.. (4)1.1产品简图Outline drawing ..................................................................................................4 1.2产品组成BOM (5)2总体要求General (5)2.1功能描述Functional description ..........................................................................................5 2.2安装位置Mounting location ................................................................................................5 2.3温度范围Ambient temperature range .................................................................................5 2.4额定范围Rating range ........................................................................................................5 3默认测试条件Default test conditions .............................................................................................5 4产品性能Performance . (6)4.1外观Appearance..................................................................................................................6 4.2结构尺寸Dimension.............................................................................................................6 4.3接触电阻Contact resistance...................................................................................................6 4.4绝缘电阻Insulation resistance...............................................................................................6 4.5耐电压Withstand voltage......................................................................................................7 4.6温升Temperature rise............................................................................................................7 4.7插入力Connector Mating Force.............................................................................................7 4.8拔出力Connector Unmating Force.........................................................................................7 4.9端子保持力Terminal to Connector Retention...........................................................................8 4.10振动Vibration....................................................................................................................8 4.11温度循环Temperature cycling..............................................................................................8 4.12耐高温Heat Resistance.......................................................................................................9 4.13耐低温Cold Resistance.......................................................................................................9 4.14盐雾Salt spray...................................................................................................................9 4.15耐焊接热Resistance to soldering heat.................................................................................10 4.16沾锡性Solderability. (10)上海徕木电子股份有限公司SHANGHAI LAIMU ELECTRONICS CO., LTD.编 号PS091101Serial Number 产品规格书Product Specification0更改记录序号 版本号 更改前描述No.： Version Description Before ModificationNumber123456版本号/ Version Number 产品名称 Connector Product Name 产品编码 See TablePart Number更改后描述 批准 日期Description After ModificationApprovalDatePage 3 of 11FOR-TS3-D08-01版本/版次：A1上海徕木电子股份有限公司SHANGHAI LAIMU ELECTRONICS CO., LTD.编 号PS091101Serial Number 产品规格书Product Specification1产品描述Product description1.1产品简图Outline drawing适用于本规格书的产品系列，如下表：P/N.料号No. No. of PIN Color A1.2产品组成BOM1.2.1接触件：黄铜,底镀镍，整体镀锡；版本号/ Version Number 产品名称 Connector Product Name 产品编码 See TablePart NumberB C D E FContact ：Brass, Pure Tin plated over Nickel under plating ； 1.2.2塑料本体：PBT+GF15；Housing ：PBT+GF15；2总体要求General2.1功能描述Functional description本产品主要适用于汽车仪表控制模块与线束的电力信号传输与连接。
3GPP 5G基站(BS)R16版本一致性测试英文原版(3GPP TS 38.141-1)
4.2.2
BS type 1-H.................................................................................................................................................. 26
4.3
Base station classes............................................................................................................................................27
1 Scope.......................................................................................................................................................13
All rights reserved. UMTS™ is a Trade Mark of ETSI registered for the benefit of its members 3GPP™ is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners LTE™ is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners GSM® and the GSM logo are registered and owned by the GSM Association
EN 71 + EN 14682 欧洲玩具的要求
EN 71 Part 1, Part 2 & Part 3 Basic Requirements for toys EN 14682 Requirements of cords and drawstrings on children’s clothing Revision of the EU Toys Safety Directive June 2010ConfidentialityCopyright 2010 Bureau Veritas Consumer Products Services, Inc.” Proprietary to Bureau Veritas Consumer Products Services, Inc.” DO NOT DISCLOSE OUTSIDE YOUR ORGANIZATION WITHOUT BUREAU VERITAS PRIOR WRITTEN CONSENT”Bureau Veritas Consumer Products Services2Please note► The information provided by this document should beused as a reference to the related standards. Details and interpretations of the requirements should be referred to the original standards.Bureau Veritas Consumer Products Services3EN71 Part 1:2005+A8:2009 Mechanical and physical propertiesScope► This European Standard applies to toys for children, toys being anyproduct or material designed or clearly intended for use in play by children of less than 14 years.Bureau Veritas Consumer Products Services5Clause 4.1 Material Quality► Toys and material used in toysShall be visually clean and free from infestationBureau Veritas Consumer Products Services6Clause 4.4 Toy bag►Toy bags with an opening perimeter > 380 mm having a drawstring as a means of closure Shall be made of material permeable to air, OR Comply with requirements given in 4.14.2 a) (masks and helmets)4.14.2a) - Provide a total ventilation area ≥ 1300 mm2 or more through at least two holes at least 150 mm apart OR through any equivalent single ventilation areaBureau Veritas Consumer Products Services7Clause 4.7 Edges► Accessible edgesshall NOT present an unreasonable risk of injury.► Hazardous sharp functional edges may be used intoys intended for children of 36 months and over.The potential danger presented by such edges shall be drawn to the attention of the user.Bureau Veritas Consumer Products Services8Clause 4.8 Points and metallic wires► Metallic wires and accessible pointsShall NOT present an unreasonable risk of injury.► Hazardous sharp functional points may be used intoys intended for children of 36 months and over.The potential danger presented by such points shall be drawn to the attention of the userBureau Veritas Consumer Products Services9Clause 4.8 Points and metallic wires► Metallic wires and other metallic componentsShall not break and produce hazardous sharp points in flexibility testBureau Veritas Consumer Products Services10►Projections which constitute a puncture hazard to a childShall be protectedThis protection shall not be removed in tension test for protective componentProjections►The ends of spokes for toy umbrellasShall be protectedIf the protection is removed in tension test for protective component, the ends of the spokes shall be free from hazardous sharp edges and hazardous sharp pointsIn addition, if the protection is removed, the spokes shall have a diameter of 2 mm or more and shall have ends with no burr and a smooth, rounded andapproximately spherical finish►Masks and helmets that fully enclose the head and which are made of impermeable materialShall provide a total ventilation area of ≥1 300 mm2through at least two holes ≥150 mm apart or through any equivalent single ventilation area►All rigid materials that cover the faceShall not expose hazardous sharp edges, hazardous sharp points or loose parts that could enter the eye, before and after being tested according to torque test, tension test, drop test, impact test and compression test►Toys that are imitations of protective masks and helmetsShall carry a warning►Toys other than magnetic/ electrical experimental sets withAny loose as-received magnet(s) and magnetic component(s), ORAny magnet(s) and magnetic component(s) that become(s) released from a toy, or from a loose as received magnetic component when tested according to socking test, torque test, tension test, seams test, drop test, impact test, compression test, and finally, for magnets that are accessible but notgrippable, tension test for magnets•Shall have a magnetic flux index less than 50 kG2mm2(0,5 T2mm2) or •Shall not be small part►Magnetic/electrical experimental sets Intended for over 8 years Shall carry a warning►Toys and removable components of toys intended for children under 36 months before and after tested according to torque test, tension test, drop test, impact test and compression testShall not be small partClause 5.2 Filling material►Soft filling materialsShall not contain any hard or sharp contaminants such as metal particles,nails, needles and splinters►Soft-filled toys containing small parts or with filling materials from which pieces can be bitten or torn thereby producing small partsShall have a covering so that, after being tested according to seam test, itshall not create a hazard►For Toys intended for children under 36 monthsCords•Shall have a thickness of ≥1.5 mmThe free length of cords which include attachments that can form nooses shall either:•Not exceed 220 mm when stretched by a force of (25 ±2) N; or•When subjected to a force of (25 ±2) N, separate into parts not exceeding 220 mm. It shall be possible to join the parts together after they have beenseparated without altering the characteristics of the jointsThe perimeter of any nooses on cords•Shall ≤380 mmNoose►Toys with self-retracting cordsshall have a mechanism recoil force < 10 N .►Cords intended to be fixed across cradles, cots, perambulators etc., shall ≤750 mm when stretched by a force of (25 ±2) N , ANDtheir length under these conditions shall ≤40 %longer than their relaxed length.•A warning shall be givenRetracting cordClause 6 Packaging►Does NOT apply to:×Shrunk-on film packaging, which is normally destroyed when thepackaging is opened by the user×Bags made of perforated sheets which shall conform EN 71-1 clause4.3 b)►The packaging of toys shall conform toBags made of flexible plastics with an opening perimeter greater than 380mm used for external or internal packaging, shall have an sheet thickness of 0.038mm or moreBags made of flexible plastics with an opening perimeter greater than 380mm shall not have a drawstring or cord as a mean of closingClause 7.1 General Labeling►Company name and address►Retain statementTo remind the final customer to keep the package for reference ►CE mark≥5 mm in heightShape of the marking must be maintained in proportionEN71 Part 2:2006+A1:2007FlammabilityScope►This European Standard specifies the categories of flammable materials which are prohibited in all toys, and requirements concerningflammability of certain toys when they are subjected to a small source of ignition.Clause 4.1 General►The following materials shall NOT be used in the manufacture of toys Celluloid (cellulose nitrate)and materials with the same behavior in fireMaterials with a piled surface which produces surface flash on the approach ofa flameHighly flammable solidFlammable gases, highly flammable liquids, flammable liquids, flammable gels►RequirementDuration of flaming < 2s after removing the flame, andIf ignition occurs, the maximum burnt length of hair, pile or other attachment shall be:•not more than 50% of the greatest initial length,when the initial length was ≥150mm•not more than 75% of the greatest initial length,when the initial length < 150mm ►ScopeBeards, moustaches, wigs etc., made from hair, pile or material with similar features (e.g. free-hanging ribbons, paper or cloth strands etc.), which protrude more than or equal to 50 mm from the surface of the toy►ScopeBeards, moustaches, wigs etc. made from hair, pile or material with similar features (e.g. free-hanging ribbons, paper or cloth strands etc.), whichprotrude less than 50 mm from the surface of the toy►RequirementDuration of flaming < 2s after removing the flame, andMaximum dimension of the burnt area shall be ≤70mm from the point of application of the flame►ScopeFull or partial moulded head masks►RequirementDuration of flaming < 2s after removing the flame, andMaximum dimension of the burnt area shall be ≤70mm from the point of application of the flame►ScopeFlowing elements of toys to be worn on the head (except those covered by4.2.2 and 4.2.3), hoods, head-dresses etc. and fabric masks which partially orfully cover the head, but excluding those items covered by 4.3►RequirementRate of spread of flame shall be ≤10 mm/s or shall self extinguish►ScopeToy disguise costumes and toys intended to be worn by a child in play►RequirementRate of spread of flame shall be ≤30 mm/s or shall self extinguishIf the rate of spread of flame is between 10 mm/s and 30 mm/s, both the toy and the packaging shall be permanently marked with the following warning:“Warning! Keep away from fire”►ScopeToys intended to be entered by a child►RequirementRate of spread of flame shall be ≤30 mm/s or shall self extinguishIf the sample has a rate of spread of flame greater than 20 mm/s, there shall be no flaming debris or molten drips.If the rate of spread of flame is between 10 mm/s and 30 mm/s, both the toy and the packaging shall be permanently marked with the following warning:“Warning! Keep away from fire”►ScopeSoft-filled toys (animals and doll etc.) with a piled or textile surface, AND Maximum unhindered vertical height >150 mm►RequirementRate of spread of flame shall be ≤30 mm/s or shall self extinguishEN71 Part 3:1994+A1:2000 Migration of certain elements►General•This European Standard specifies requirements and test methods for the migration of the elements antimony, arsenic, barium, cadmium, chromium,lead, mercury and selenium from toy materials and from parts of toysexcept materials not accessible►Applied for•Toys intended for children under 6 years old•All accessible material•Toys intended for children over 6 years old•All intended food/oral contact toys, cosmetic toys and writinginstruments categorized as toys►Testing Materials include•Coating of paint, varnish, lacquer, printing ink, polymer and similar coating •Polymeric and similar materials including laminates•Paper and paper board•Textile, whether natural or synthetic•Glass, ceramic and metallic materials•Other materials whether mass coloured or not (e.g. wood, fibre and hard board, bone and leather);•Material intended to leave a trace (e.g. pencil and liquid ink in pens)•Modelling clays and gel•Paints, including varnishes, lacquers, glazing powders and similar materials►NotesTest portions where less than 10mg of materials are not to be testedGlass, ceramic and metallic materials would be tested only if it can fit entirely within the “small parts cylinder”after relevant tests specified inEN71 part 1Tea Pot(Ceramic type)Fit entirely within Small Part CylinderRequirements500500Selenium (Se)6060Antimony (Sb)9090Lead (Pb)2560Mercury (Hg)2560Chromium (Cr)5075Cadmium (Cd)2501000Barium (Ba)2525Arsenic (As)For Modelling Clay, Limit in ppmFor General Toy, Limit in ppmElementsEN 14682:2007 Requirements of cords and drawstrings onchildren’s clothingEntanglement / Strangulation Hazard & Vehicular Dragging HazardTragedy happened in 2007…Hong Kong…Hood and Neck Drawstring: US & EU RequirementsAge 0-6 yrs. 11 mon: No drawstrings, decorative cords or functional cords Age 7-14 yrs:Drawstrings can’t have free ends.No protruding loop when garment is open at its largest & the garment is laid flat.Max. protruding loop circumference of 150mm (6 inch) when the garment is at the size intended to fit.Cords < 75 mm at either end and not elastic Can’t emerge from the back of the garment.Drawstrings must be secured (bartack)at midpoint.Toggles allowed on drawstrings with no free ends or decorative cords.No hood/neck drawstrings are allowedNohood/neck drawstrings are allowedDrawstrings should not be used in the head/neck areaRequirements:0-140 -162T -122T -12Sizes / Ages:All Children’s ClothingAll Children’s ClothingAllChildren’s Clothing Upper OuterwearTypes of Apparel Included:EU (EN 14682)WisconsinNew YorkUS (CPSC/ASTM)Country/ State/ Regions:Waist and Bottom Drawstring: US & EU Requirements•Waist area drawstrings protrude140mm (5.5 inch) max. at each end when the garment is flat & less than 280mm (11 inch) when closed to the intended waist size or have a loop with a max circumference of 280mm.•Age 0-6 yrs. 11 mon, tied belts orsashes intended to be tied at the back, shall be no more than 360mm and when untied do not hang below the hem of the garment, Age 7-14 yrs, shall be no more than 360mm .•Drawstrings,decorative cords or functional cords hanging below the hip, can’t hang below the lower edge of the garment. Drawstringsdecorative cords or functional cords can’t protrude from the bottom hem of coats, trousers or skirts that are designed to finish at the ankle •Drawstrings decorative cords or functional cords can’t emerge from 0-14All children’s clothingEU (EN 14682)•No more than 3 inches of the drawstring shall be outside of the drawstring channel when the garment is extended to its fullest width •Toggles, knots or other attachments shall not be used at the ends of the drawstring •The drawstring shall be sewn at the midpoint point of the channel so it cannot be completely pulled out of the channel.0-16Children’s upper outerwearWisconsin•No more than 3 inches of the drawstring shall be outside of the drawstring channel when the garment is extended to its fullest width •The drawstring shall be attached to the garment at its midpoint.•No more than 3 inches of the drawstring shall be outside of the drawstring channel when the garment is extended to its fullest width •Toggles, knots or other attachments shall not be used at the ends of the drawstring •The drawstring shall be sewn at the midpoint of the channel so it cannot be pulled long enough to catch on something Require ments:2T-162T-16Sizes / Ages:All children’s clothing Children’s upper outerwearTypes of Apparel Included:New YorkCPSC / ASTMCountry/ State/ Regions:Recall case -2009Hazards: 0-7yrs ,strangulation by cord around the neckRecall case -2009Hazards: up to 8yrs ,The product poses a risk of strangulation due to the presence of drawstrings at the hoodRecall case -2009Hazards:0-7yrs,strangulation by cord on the hood ; injury due to free-ended drawstring in the trousersRecall case -2009Hazards: 0-7yrs strangulation by decoration cord around the neck; 7-14 yrs strangulation for cord length is more than 75mmRecall case -2009Hazards: Waist drawstring is too long and not fixed; the drawstrings in the legs may pose a serious risk of injury to the child if it gets entrapped.Recall case -2009Hazards: A risk of injuries due to the presence of a decorative ribbon in the waist areaRevision of the EU Toys Safety DirectiveImplementation scheduleParliament’svoteEntry into force 20 days after publication into OJEU (June 30, 2009)All requirements except chemical ones are to be appliedChemical requirementsare to be appliedJuly 20,2013July 20, 2011July 20,2009Dec 18,200818 months maximum period for transpositioninto national legislation January 20,2011。
EN71-1 -2 -3测试项目
物理和机械性能该部分主要包括跌落检测、小零件检测、锐利边缘检测、拉力检测、压力检测、线缝检测、耳鼻眼拉力、扭力检测等。
物理测试部分一般要求：
EN71-2 玩具安全－第2部分：
阻燃性能该部分规定了所有玩具禁止使用的易燃材料种类及对某些小型火源的玩具的燃烧性能要求。
要求被检测材料的燃烧速度不得超过标准规定的限值。
涉及到戴在头上的玩具、玩具化装服饰和供儿童在玩耍中穿戴的玩具、供儿童进入的玩具、含毛绒或纺织面料的软填充玩具。
1、要求被测试材料的燃烧速度不得超过标准规定的限值。
某些元素的转移该部分规定了玩具的可触及部件或材料中可迁移元素（锑、砷、钡、镉、铬、铅、汞、锡）的最大限值。
其检测原理是：可溶性元素是模拟材料在吞咽后与胃酸持续接触一段时间的条件下，从玩具材料中提取出的溶出物。
采用检出限适当的方法定量测定可溶性元素的含量。
限值要求：。
新ECE R117
Agreement 协议Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions*关于可以安装和/或应用到轮式车辆的轮式交通工具、设备以及配件采取统一的标准且对基于这些规定授予的认证相互认可(Revision 2, including the amendments which entered into force on 16 October 1995) (修订版2，包括1995年10月16号生效的修正案)Addendum 116: Regulation No. 117附录116：第17号法规Revision 2 修正2Incorporating all valid text up to:合并所有以下有效文件：Corrigendum 1 to the Revision 1 - Erratum对01修正案的勘误1-书写错误Corrigendum 2 to the 01 series - Date of entry into force: 25 June 2008对于01修正案的勘误2—强制实施日期：2008年6月25日Corrigendum 3 to the 01 series - Date of entry into force: 10 March 2009对01修正案的勘误3—强制实施日期：2009年3月10日02 series of amendments - Date of entry into force: 30 January 201102修正案—强制实施日期2011年1月30日Corrigendum 1 to the 02 series of amendments - Date of entry into force: 30 January 201102修正案正误1—强制实施日期：2011年1月30日Corrigendum 2 to the 02 series of amendments - Date of entry into force: 22 June 201102修正案正误2—强制实施日期2011年6月22日Corrigendum 3 to the 02 series of amendments - Date of entry into force: 22 June 201102修正案正误3—强制实施日期：2011年6月22日Uniform Provisions concerning the Approval of Tyres with regard to Rolling Sound Emissions and to Adhesion on Wet Surfaces and/or to Rolling Resistance关于轮胎对于滚动噪音，湿地抓取及滚动阻力认证的统一规定UNITED NATIONS联合国* Former title of the Agreement:Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on 20 March 1958.协议曾用题目：关于可以安装和/或应用到轮式车辆的轮式交通工具及其配件采取统一的标准且对基于这些规定授予的认证相互认可的协议，完成于1958年3月20日，日内瓦。
各国玩具的检验标准
各国玩具检测标准简介1, 国际标准International Organization for Standardization(ISO)ISO 8124-1:2000 Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical PropertiesISO 8124-2:1994FlammabilityISO 8124-3:1997Migration of Certain ElementsISO 8098:1989 Cycles - Safety Requirements for Bicycles for Y oung Children2, 阿根廷标准Instituto Argentino de Racionalization de Materials 3583:Parte 1:1986 Seguridad de los juguetes, marcado, Rotulado yembalajeParte 2: 1988 Propiedades meconicasy fisicasParte 3:1988 InflamabilidadParte 4:1991 Requisitos toxicologicosParte 5:1996 Juegos de experimentos quimicos y actividadesrelacionadas3，澳大利亚标准AS 1647.1-1990 Children's Toys (safety requirements)Part 1: General requirementsAS 1647.2-1992 Children's toys (safety requirements)Part 2: Constructional requirementsAS1647.2-1992/Amdt. 1-1995 Children's Toys (safetyrequirements) - Constructional RequirementsAS 1647.3-1995Children's toys: (safety requirements)Part 3: Toxicological requirementsAS 1647.4-1980 Children's toys (safety requirements)Part 4: Flammability requirementsAS 1900-1991 Flotation toysand swimming aids for childrenAS 1900-1991/Amdt. 1-1993Flotation Toys & Swimming Aids for Children4，巴西标准ABNT (Brazilian Association of Technical Standards)NBR11786/1998 - Toy Safety5，加拿大标准Technical Standards Safety Act and Upholstered and StuffedArticles RegulationHazardous Products Act R.S. c.H-3HazardousProducts (Toys) Regulations C.R.C., c. 931Hazardous Products(Pacifiers) Regulations: "Knob-Like" PacifiersPolicyRegulations Respecting the Advertising, Sale andImportation of Hazardous Products (Pacifiers) under HazardousProducts ActA Guide to Safety Requirements for ToysToys: AgeClassification Guidelines6，中国标准GB 6675-86 Toy Safety StandardGB 9832-93 Safety and Quality of Sewn, Plush and Cloth ToysGB 5296.5-96 Labeling and Instructions for Toys7，欧洲标准EN71: Part 1; 1998 Safety of Toys Part 1. Specification for Mechanical and Physical PropertiesEN71: Part 2: 1993 Safety of Toys Part 2,Specification for Flammability RequirementsEN71: Part 3: 1994 Safety of Toys Part 3. Speicfication for Migration of Certain ElementsEN71:Part 4:1990 Safety of ToysPart 4. Specification for Experimental Sets for Chemistryand Related Activities and Amendment 1998EN71:Part 5:1993 Safety of ToysPart 5. Chemical Toys (sets) otherThan Experimental SetsEN71:Part 6:1995 Safety of ToysPart 6, Graphical Symbol for AgeWarning LabelingEuropean Standard EN50088:1996 on the Safety of Electric Toys EN 50088/AI Amendment TO EN50088:1996HD271 SI:1982 Safety of Electrical Toys Council Directive (88/378/EEC) Approximation of the Laws of the Member States Concerning the Safety of Toys Council Directive (87/357/EEC) Dangerous Imitations DirectiveCouncil Directive (93/68/EEC) Rules for Affixing and Use of the CE Conformity Marking8，香港标准Toys and Children's Products Safety Regulation (incompliance with ASTM F963, ICTI or EN-71)9，日本标准The Japan Toy Association Toy Safety StandardPart 1 - Mechanical and Physical PropertiesPart 2 - FlammabilityPart 3 - Chemical Properties10，马来西亚标准Safety of ToysMS EN71 Part 1:1995 (P)Mechanical and PhysicalPropertiesMS ISO 8124-2:1999FlammabilityMS EN71 Part 3:1998Migration of Certain ElementsMS EN71 Part4:1998Experimental Sets for Chemistry and Related ActivitiesMSEN71 Part 5: 1998Chemical Toys (Sets) Other than ExperimentalSets11，墨西哥标准NOM 015/10-SCFI/SSA-1994Toy Safety and CommercialInformation - Toy and School Material Safety. Limits on theBioavailability of Metals used on Articles with Paints andDyes. Chemical Specifications and Test Methods.12，新西兰标准NZS 5820:1982 Specification for the Safety of ToysAmendmentNo. 1 to NZS 5820NZS 5820:1982 CORR1NZS 5822:1992 ThePrevention of Ingestion and Inhalation Hazards in ToysIntended for Use by Children Under Three Y ears of Age13，阿拉伯标准SSA 765-1994 Playground Equipment Part I: General Safety RequirementsSSA 1063-1994 Toys and General Safety RequirementsSSA 1064-1995 Method of Testing Part 1: Mechanical and Chemical TestsSSA 1065-1995 Method of Testing Toys Part 2: FlammabilitySSA1322-1997 Low Power Radio Frequency Devices14，新加坡标准Safety of Toys:SS 474 PT. 1:2000 Part 1: Mechanical and Physical PropertiesSS 474 PT. 2: 2000 Part 2: FlammabilitySS 474 PT. 3: 2000 Part 3: Migration of Certain ElementsSS 474 PT. 4: 2000Part 4: Experimental Sets for Chemistryand Related ActivitiesSS 474 PT. 5: 2000Part 5: Chemical Toys (sets) Other Than Experimental SetsSS 474 PT. 6: 2000Part 6: Graphical Symbol for Age Warning labeling15，南非标准SABS ISO 8124-1:2000 Safety of Toys - Part 1: Safety Aspects Related to Mechanical and Physical PropertiesSABS ISO 8124-2:1994 FlammabilitySABS ISO 8124-3:1997Migration of Certain Elements16，泰国标准Thai Industrial Standard for Toys TIS 685-2540Part1: General Requirements (1997)Compulsory Stnd. (effective date 5 January 1999)Part 2: Packages and Labeling (1997)Part 3: Methods of Test & Analysis(1997)。
冒烟测试报告主要功能稳定性评估
冒烟测试报告主要功能稳定性评估一、引言冒烟测试是软件开发过程中的一项关键测试活动，其主要目的是在软件交付前快速、简单地验证系统是否能够正常运行，并初步评估系统的主要功能的稳定性。
本报告旨在对冒烟测试进行详细评估，包括测试对象、测试环境、测试方法、测试结果和结论等内容。
二、测试对象本次冒烟测试的对象为软件系统X。
该系统是一个商务智能平台，主要用于企业数据分析与决策支持。
系统具有多项关键功能，包括数据采集、数据清洗、数据分析、报表生成等。
本次测试主要关注系统的主要功能的稳定性，以确保系统在生产环境下能够正常运行。
三、测试环境1. 硬件环境：- 操作系统：Windows Server 2016- 处理器：Intel Core i7-8700 3.2GHz- 内存：8GB2. 软件环境：- 开发环境：Java 8、Eclipse IDE- 测试环境：Tomcat 9、MySQL 5.7- 版本控制：Git四、测试方法1. 测试准备：在进行冒烟测试之前，测试团队进行了充分的测试准备工作，包括系统部署、数据库初始化、关键数据准备等。
同时，根据需求和设计文档，编写了测试用例以覆盖系统的主要功能。
2. 测试执行：根据测试用例，测试团队在合适的测试环境中进行了冒烟测试。
测试团队按照事先设计好的测试流程，逐一执行测试用例，并记录测试结果和系统行为。
主要评估系统的功能稳定性，包括系统是否能够正常启动、功能是否能够正常运行等。
3. 测试数据：为了保证测试的全面性和真实性，测试团队制定了一套合适的测试数据集，包含了各种边界情况和异常情况。
同时，为了验证系统的可靠性，测试团队还模拟了多用户访问场景，对系统的并发处理能力进行了评估。
五、测试结果根据测试执行情况和测试数据的分析，我们对系统的主要功能稳定性进行了评估。
具体测试结果如下：1. 系统启动：在测试过程中，系统能够快速启动，并在短时间内完成初始化。
启动过程没有出现明显的错误或异常情况。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
TEST REPORTMechanical&Hardgoods Lab Report No：HY/2008/70052Page：1of 5Date：2008/07/14KINLUX INDUSTRIAL CORPRATION201MING CHUAN ROAD,SEC.2,TAINAN700TAIWANThe following merchandise was submitted&identified by the applicant as:Type of Product:Style/Item No: Manufacturer/Vendor: Country of Origin:Labeled Age Grading:Age group Applied in Testing:GAME SETSPC5576-25KINLUX INDUSTRIAL CORPORATION CHINANot Stated3Years And UpDate of Sample received:2008/06/19&2008/07/03We have tested the submitted sample(s)as requested and the following results were obtained: Test Requested Result European Standard on Safety of Toys:-EN71Part1:2005/A3:2006/A4:2007/AC:2006–Mechanical and Physical Properties (Excluding Clause7)Pass-EN71Part2:2006/AC:2006–Flammability Pass -EN71Part3:1994,A1:2000,AC:2000and AC:2002–Migration of Certain Elements Pass*This report is combined with report of HY/2008/60411****************FOR FURTHER DETAILS,PLEASE REFER TO THE FOLLOWING PAGE(S)****************Signed for and on behalf ofSGS Taiwan Ltd.Iris HuangSupervisorTEST REPORTMechanical&Hardgoods Lab Report No：HY/2008/70052Page：2of5 Test Results:European Standard-Safety of Toys:EN71Part1:2005/A3:2006/A4:2007/AC:2006–Mechanical and Physical Properties4.1Material PASS4.2Assembly N/A4.3Flexible plastic sheeting PASS4.4Toy bags N/A4.5Glass N/A4.6Expanding materials N/A4.7Edges PASS4.8Points and wires PASS4.9Protruding parts N/A4.10.1Folding and slide mechanism N/A4.10.2Driving mechanisms N/A4.10.3Hinges N/A4.10.4Spring N/A4.11Mouth-actuated toys N/A4.12Balloons N/A4.13Cords of toy kites and other flying toys N/A4.14.1Toys which a children can enter N/A4.14.2Masks and helmets N/A4.15.1Toys propelled by the child or by other means N/A4.15.2Free-wheeling toy bicycles N/A4.15.3Rocking horses and similar toys N/A4.15.4Toys not propelled by a child N/A4.15.5Toy scooters N/A4.16Heavy immobile toys N/A4.17Projectiles N/A4.18Aquatic toys N/A4.19Percussion caps specifically designed for use in toys N/A4.20Acoustics N/A4.21Toys containing a heat source N/A4.22Small balls N/ATEST REPORTMechanical&Hardgoods Lab Report No：HY/2008/70052Page：3of5 5Toys intended for children under36months5.1General requirement N/A5.2Filling materials N/A5.3Plastic sheeting N/A5.4Cords on toys N/A5.5Liquid-filled toys N/A5.6Speed limitation of electrically driven toys N/A5.7Glass and porcelain N/A5.8Shape and size of certain toys N/A5.9Toys comprising monofilament fibres N/A5.10Small balls N/A5.11Play figures N/A5.12Hemispheric shaped toys N/A5.13Suction cups N/A6Packaging N/A7Warnings and instruction for use(Note:It is drawn to your attention that the warnings,precautions and instructions foruse should be given in the national language(s)of the country where the toy is sold.)EXCLUDED (See Remark1)7.1General Requirements(Remark1:It is drawn to your attention that the toy or its packaging shall bear thename and address of the manufacturer or his authorised representative or theimporter,and retain statement in a visible,easily legible and indelible formtogether with the CE-marking as declaration of conformity with the safetyrequirements of the directive.)N/A:Not ApplicableEuropean Standard-Safety of Toys：EN71Part2:2006/AC:2006-Flammability of Toys 4.1General Requirements PASS 4.2Toys to be worn on the head N/A 4.3Toy disguise costumes and toys intended to be worn by a child in play N/A 4.4Toys intended to be entered by a child N/A 4.5Soft filled toys(animals and dolls,etc)with a piled or textile surface N/AN/A:Not ApplicableTEST REPORTMechanical&Hardgoods Lab Report No：HY/2008/70052Page：4of5 EN71Part3:1994with the incorporation of amendments A1:2000,AC:2000and AC:2002-Migration of Certain Element PASS Element12345LimitLead(Soluble)<5.0<5.0<5.0<5.0<5.090mg/kg Antimony(Soluble)<5.0<5.0<5.0<5.0<5.060mg/kg Arsenic(Soluble)<2.5<2.5<2.5<2.5<2.525mg/kg Barium(Soluble)36.0<10.0<10.0<10.0255.01000mg/kg Cadmium(Soluble)<5.0<5.0<5.0<5.0<5.075mg/kg Chromium(Soluble)<5.0<5.0<5.0<5.0<5.060mg/kg Mercury(Soluble)<5.0<5.0<5.0<5.0<5.060mg/kg Selenium(Soluble)<5.0<5.0<5.0<5.0<5.0500mg/kgElement6789LimitLead(Soluble)<5.0<5.0<5.0<5.090mg/kg Antimony(Soluble)<5.0<5.0<5.0<5.060mg/kg Arsenic(Soluble)<2.5<2.5<2.5<2.525mg/kg Barium(Soluble)<10.0510.0<10.0<10.01000mg/kg Cadmium(Soluble)<5.0<5.0<5.0<5.075mg/kg Chromium(Soluble)<5.0<5.0<5.08.060mg/kg Mercury(Soluble)<5.0<5.0<5.0<5.060mg/kg Selenium(Soluble)<5.0<5.0<5.0<5.0500mg/kgDescription:1.White plastic of sample.2.Orange coating of sample.3.Blue coating of sample.4.Brown coating of sample.5.Yellow coating of sample.6.Peach coating of sample.7.Green coating of sample.8.White paper of sample.9.Multicolored printing of sample.(card)TEST REPORTMechanical &Hardgoods LabReport No ：HY/2008/70052Page ：5of 5NOTE ：-mg/kg =ppm -"<"=Less than"Testing period :2008/07/04–07/11Sample picture (As received)**End of Report **。