BST52TA;中文规格书,Datasheet资料
PA52,PA52A, 规格书,Datasheet 资料
芯天下--/
MAR 20111 APEX − PA52UREVH
PA52 • PA52A
ABSOLUTE MAXIMUM RATINGS
SUPPLY VOLTAGE, +VS to –VS BOOST VOLTAGE, +Vb to -Vb OUTPUT CURRENT, within SOA POWER DISSIPATION, internal INPUT VOLTAGE, differential INPUT VOLTAGE, common mode TEMPERATURE, pin solder - 10s TEMPERATURE, junction2 TEMPERATURE, storage OPERATING TEMPERATURE RANGE, case
EXTERNAL CONNECTIONS
–IN +IN
-Vs -Vs -OUT -OUT
1
12
2
11
3
TOP
10
4
VIEW
9
5
8
6
7
-Vb +Vb +Vs +Vs +OUT +OUT
Copyright © Cirrus Logic, Inc. 2011 (All Rights Reserved)
±
±VS 9.5 ±VS 8.0 ±VS 5.8 ±VS 4.0
80 1
50 2.5
±
*
*
±
±
±VS 5.8 ±VS 5.0 *
*
*
*
Full temperature range Full temperature range
BZT52C43-7-F;BZT52C51-7-F;BZT52C47-7-F;BZT52C43-13;BZT52C43-7;中文规格书,Datasheet资料
SURFACE MOUNT ZENER DIODEFeatures• Planar Die Construction• General Purpose, Medium Current• Ideally Suited for Automated Assembly Processes•Lead, Halogen and Antimony Free, RoHS Compliant "Green" Device (Notes 5 and 6)Mechanical Data• Case: SOD-123• Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0• Moisture Sensitivity: Level 1 per J-STD-020D• Terminals: Solderable per MIL-STD-202, Method 208• Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe)• Polarity: Cathode Band• Marking Information: See Page 2 • Ordering Information: See Page 2 •Weight: 0.01 grams (approximate)Top ViewThermal CharacteristicsCharacteristicSymbol Value Unit Power Dissipation (Note 1)P D 410 mW Thermal Resistance, Junction to Ambient Air (Note 1) R θJA 305 °C/W Operating and Storage Temperature Range T J, T STG-65 to +150°CElectrical Characteristics @T A = 25°C unless otherwise specifiedZener Voltage Range(Note 2) Maximum Zener Impedance (Note 4) Maximum Reverse Current (Note 2) V Z @ I ZTI ZT Z ZT @ I ZTZ ZK @ I ZKI ZK I R @ V R Type Number Marking Code (Note 3)Nom (V) Min (V)Max (V)mA ΩmA uA V BZT52C43 WU/WU 43 40.0 46.0 5 100 700 1.0 0.1 32 BZT52C47 WV/WZ 47 44.0 50.0 5 100 750 1.0 0.1 35 BZT52C51WW/X15148.054.05100750 1.00.138Notes:1. Device mounted on ceramic PCB; 7.6mm x 9.4mm x 0.87mm with pad areas 25mm 2. 2. Short duration pulse test used to minimize self-heating effect.3. When provided, otherwise, parts are provided with date code only, and type number identification appears on reel only.4. f = 1kHz.5. No purposefully added lead. Halogen and Antimony Free.6. Product manufactured with Data Code V9 (week 33, 2008) and newer are built with Green Molding Compound. Product manufactured prior to DateCode V9 are built with Non-Green Molding Compound and may contain Halogens or Sb 2O 3 Fire Retardants.Please click here to visit our online spice models database.10I , Z E N E R C U R R E N T (m A )Z V , ZENER VOLTAGE (V)Fig. 2 Typical Zener Breakdown Characteristics Z0.10.20.30.40.52505075100125150P , P O W E R D I S S I P A T I O N (W )D T , AMBIENT TEMPERATURE (C)Fig. 1 Power Derating CurveA °0.6C , T O T A L C A P A C I T A N C E (p F )T 110100V , NOMINAL ZENER VOLTAGE (V)Fig. 3 Typical T otal Capacitance vs. Nominal Zener Voltage ZOrdering Information (Note 7)Part Number Case Packaging BZT52CXX-7-F*SOD-123 3000/Tape & Reel*Replace “XX” with the nominal Zener breakdown voltage; i.e. Part number for 43V device would be BZT52C43-7-F.Notes:7. For packaging details, go to our website at /datasheets/ap02007.pdf.Marking Informationxx = Product Type Marking Code(See Electrical Characteristics Table) YM = Date Code Marking Y = Year (ex: N = 2002)M = Month (ex: 9 = September)XXY MDate Code KeyYear 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2111 2012 Code JK L M N P RST U V WXY ZMonth Jan FebMarAprMayJunJulAugSepOctNovDecCode 1 2 3 4 5 6 7 8 9 O N DPackage Outline DimensionsSuggested Pad LayoutIMPORTANT NOTICEDiodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.LIFE SUPPORTDiodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.SOD-123Dim Min Max A 0.55 Typ B 1.40 1.70 C 3.55 3.85 H 2.55 2.85 J 0.00 0.10 K 1.00 1.35 L 0.25 0.40 M 0.10 0.15α0 8° All Dimensions in mmZXCG YDimensions Value (in mm)Z 4.9 G 2.5 X 0.7 Y 1.2 C 3.7分销商库存信息:DIODESBZT52C43-7-F BZT52C51-7-F BZT52C47-7-F BZT52C43-13BZT52C43-7BZT52C47-13 BZT52C47-7BZT52C51-7。
BZT52C5V1S-TP;BZT52C3V9S-TP;BZT52C12S-TP;BZT52C27S-TP;BZT52C39S-TP;中文规格书,Datasheet资料
THRU BZT52C39S200 mW Zener Diode 2.4 to 39 VoltsFeaturesx Planar Die Constructionx 200mW Power Dissipation on Ceramic PCB x General Purpose Medium Currentx Ideally Suited for Automated Assembly Processes BZT52C2V4Somp onents 20736 Marilla Street Chatsworth! "# $ % ! "#Micro Commercial Components• Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1ELECTRICAL CHARACTERISTICS @25q C(1)Device mounted on ceramic PCB: 7.6mm x 9.4mm x 0.87mm with pad areas 25 mm (2) f=1KHzZENER VOLTAGE V Z (1) VOLTS Maximum Zener Impedance (2)Z ZT (OHMS) Maximum Zener Impedance (2)Z ZK (OHMS)REVERSECURRENT I R (Max) @ V R TypicalTemperature Coefficent @ I ZTCTypeMin. Nom Max. I ZT (mA)Max. I ZK (mA) Max. uA V mV/ćMarking BZT52C2V4S 2.28 2.4 2.56 5 100 1.0 600 50 1.0 -3.5 0 WX BZT52C2V7S 2.5 2.7 2.9 5 100 1.0 600 20 1.0 -3.5 0 W1BZT52C3V0S 2.8 3.0 3.2 5 95 1.0 600 10 1.0 -3.5 0 W2BZT52C3V3S 3.1 3.3 3.5 5 95 1.0 600 5 1.0 -3.5 0 W3BZT52C3V6S 3.4 3.6 3.8 5 90 1.0 600 5 1.0 -3.5 0 W4BZT52C3V9S 3.7 3.9 4.1 5 90 1.0 600 3 1.0 -3.5 0 W5BZT52C4V3S 4.0 4.3 4.6 5 90 1.0 600 3 1.0 -3.5 0 W6BZT52C4V7S 4.4 4.7 5.0 5 80 1.0 500 3 2.0 -3.5 0.2W7BZT52C5V1S 4.8 5.1 5.4 5 60 1.0 480 2 2.0 -2.7 1.2W8BZT52C5V6S 5.2 5.6 6.0 5 40 1.0 400 1 2.0 -2.0 2.5W9BZT52C6V2S 5.8 6.2 6.6 5 10 1.0 150 3 4.0 0.4 3.7WA BZT52C6V8S 6.4 6.8 7.2 5 15 1.0 80 2 4.0 1.2 4.5WB BZT52C7V5S 7.0 7.5 7.9 5 15 1.0 80 1 5.0 2.5 5.3WC BZT52C8V2S 7.7 8.2 8.7 5 15 1.0 80 0.7 5.0 3.2 6.2WD BZT52C9V1S 8.5 9.1 9.6 5 15 1.0 100 0.5 6.0 3.8 7.0WE BZT52C10S 9.4 10 10.6 5 20 1.0 150 0.2 7.0 4.5 8.0WF BZT52C11S 10.4 11 11.6 5 20 1.0 150 0.1 8.0 5.4 9.0WG BZT52C12S 11.4 12 12.7 5 25 1.0 150 0.1 8.0 6.0 10.0WH BZT52C13S 12.4 13 14.1 5 30 1.0 170 0.1 8.0 7.0 11.0WI BZT52C15S 13.8 15 15.6 5 30 1.0 200 0.1 10.5 9.2 13.0WJ BZT52C16S 15.3 16 17.1 5 40 1.0 200 0.1 11.2 10.4 14.0W K BZT52C18S 16.8 18 19.1 5 45 1.0 225 0.1 12.6 12.4 16.0WL BZT52C20S 18.8 20 21.2 5 55 1.0 225 0.1 14.0 14.4 18.0WM BZT52C22S 20.8 22 23.3 5 55 1.0 250 0.1 15.4 16.4 20.0WN BZT52C24S 22.8 24 25.6 5 70 1.0 250 0.1 16.8 18.4 22.0WO BZT52C27S 25.1 27 28.9 2 80 0.5 300 0.1 18.9 21.4 25.3WP BZT52C30S 28 30 32 2 80 0.5 300 0.1 21.0 24.4 29.4WQ BZT52C33S 31 33 35 2 80 0.5 325 0.1 23.1 27.4 33.4WR BZT52C36S 34 36 38 2 90 0.5 350 0.1 25.2 30.4 37.4WS BZT52C39S 37 39 41 2 130 0.5 350 0.1 27.3 33.4 41.2WTBZT52C2V4S THRU BZT52C39STMMicro Commercial Components0102030I ,Z E N E R C U R R E N T (m A )Z V ,ZENER VOLTAGE (V)Z Fig.3. Zener Breakdown Characteristics10203040102030405012345678910I ,Z E N E R C U R R E N T (m A )Z V ,ZENER VOLTAGE (V)Z Fig.2Zener Breakdown CharacteristicsT , AMBIENT TEMPERATURE,°C A Fig. 1. Power Derating CurveP ,P O W E R D I S S I P A T I O N (m W )D 2001000300100200C ,T O T A L C A P A C I T A N C E (p F )T 101001000101001V ,NOMINAL ZENER VOLTAGE (V)Z Fig.4Total Capacitance vs Nominal Zener VoltageBZT52C2V4S-BZT52C39STypical characteristicsMicro Commercial ComponentsMicro Commercial Componentswww.mccsemi .comDevicePackingPart Number-TP Tape&Reel: 3Kpcs/ReelOrdering Information :***IMPORTANT NOTICE***Micro Commercial Components Corp. reserve s the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages.***LIFE SUPPORT***MCC's products are not authorized for use as critical components in life support devices or systems without the express writtenapproval of Micro Commercial Components Corporation.***CUSTOMER AWARENESS***Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below . Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors./分销商库存信息:MICRO-COMMERICAL-COBZT52C5V1S-TP BZT52C3V9S-TP BZT52C12S-TP BZT52C27S-TP BZT52C39S-TP BZT52C33S-TP BZT52C3V0S-TP BZT52C2V7S-TP BZT52C9V1S-TP BZT52C2V4S-TP BZT52C3V3S-TP BZT52C3V6S-TP BZT52C4V3S-TP BZT52C4V7S-TP BZT52C5V6S-TP BZT52C6V2S-TP BZT52C6V8S-TP BZT52C7V5S-TP BZT52C8V2S-TP BZT52C11S-TP BZT52C16S-TP BZT52C18S-TP BZT52C20S-TP BZT52C22S-TP BZT52C30S-TP。
SA52-11SRWA, 规格书,Datasheet 资料
SPEC NO: DSAA4906 APPROVED: WYNEC
REV NO: V.12 CHECKED: Joe Lee
DATE: FEB/09/2011 DRAWN: D.M.Su
PAGE: 1 OF 6 ERP: 1301000527
芯天下--/
Selection Guide
PACKING & LABEL SPECIFICATIONS
SA52-11SRWA
SPEC NO: DSAA4906 APPROVED: WYNEC
REV NO: V.12 CHECKED: Joe Lee
DATE: FEB/09/2011 DRAWN: D.M.Su
PAGE: 4 OF 6 ERP: 13010Βιβλιοθήκη 0527Description
The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode.
Package Dimensions& Internal Circuit Diagram
Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2]
BSP52中文资料
BSP52Absolute Maximum Ratings* T A =25°C unless otherwise noted* These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.NOTES:1)These ratings are based on a maximum junction temperature of 150°C.2)These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.Electrical Characteristics T A =25°C unless otherwise notedThermal Characteristics T A =25°C unless otherwise notedSymbol ParameterValue Units V CES Collector-Emitter Voltage 80V V CBO Collector-Base Voltage 90V V EBO Emitter-Base Voltage 5V I C Collector Current- Continuous800mA T J , T STGOperating and Storage Junction Temperature Range- 55 ~ +150°CSymbolParameterTest ConditionsMin.Typ.Max.Units Off Characteristics V (BR)CBO Collector-Base Breakdown Voltage I C = 100µA, I E = 090V V (BR)EBO Emitter-Base Breakdown Voltage I E = 10µA, I C = 05V I CES Collector Cutoff Current V CE = 80V, V BE = 010µA I EBO Emitter Cutoff Current V EB = 4.0V, I C = 010µAOn Characteristicsh FE DC Current GainI C = 150mA, V CE = 10V I C = 500mA, V CE = 10V 10002000V CE (sat)Collector-Emitter Saturation Voltage I C = 500mA, I B = 0.5mA 1.3V V BE (sat)Base-Emitter Saturation VoltageI C = 500mA, I B = 0.5mA1.9VSymbol ParameterMax.Units P D Total Device Dissipation Derate above 25°C10008.0mW mW/°C R θJAThermal Resistance, Junction to Ambient125°C/WBSP52NPN Darlington Transistor•This device is designed for applications requiring extremly high current gain at collector currents to 500mA.•Sourced from process 03.SOT-22312431. Base 2. Collector 3. EmitterBSP52TRADEMARKSThe following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.DISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONS Definition of TermsDatasheet Identification Product Status DefinitionAdvance InformationFormative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.PreliminaryFirst ProductionThis datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.No Identification Needed Full ProductionThis datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.Obsolete Not In ProductionThis datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.FASTr™FRFET™GlobalOptoisolator™GTO™HiSeC™I 2C™ISOPLANAR™LittleFET™MicroFET™MicroPak™MICROWIRE™OPTOLOGIC ®OPTOPLANAR™PACMAN™POP™Power247™PowerTrench ®QFET™QS™QT Optoelectronics™Quiet Series™SLIENT SWITCHER ®SMART START™SPM™Stealth™SuperSOT™-3SuperSOT™-6SuperSOT™-8SyncFET™TinyLogic™TruTranslation™UHC™UltraFET ®VCX™ACEx™Bottomless™CoolFET™CROSSVOLT ™DOME™EcoSPARK™E 2CMOS™EnSigna™FACT™FACT Quiet series™FAST ®。
BSP52;中文规格书,Datasheet资料
BSP52Absolute Maximum Ratings* T A =25°C unless otherwise noted* These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.NOTES:1)These ratings are based on a maximum junction temperature of 150°C.2)These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.Electrical Characteristics T A =25°C unless otherwise notedThermal Characteristics T A =25°C unless otherwise notedSymbol ParameterValue Units V CES Collector-Emitter Voltage 80V V CBO Collector-Base Voltage 90V V EBO Emitter-Base Voltage 5V I C Collector Current- Continuous800mA T J , T STGOperating and Storage Junction Temperature Range- 55 ~ +150°CSymbolParameterTest ConditionsMin.Typ.Max.Units Off Characteristics V (BR)CBO Collector-Base Breakdown Voltage I C = 100µA, I E = 090V V (BR)EBO Emitter-Base Breakdown Voltage I E = 10µA, I C = 05V I CES Collector Cutoff Current V CE = 80V, V BE = 010µA I EBO Emitter Cutoff Current V EB = 4.0V, I C = 010µAOn Characteristicsh FE DC Current GainI C = 150mA, V CE = 10V I C = 500mA, V CE = 10V 10002000V CE (sat)Collector-Emitter Saturation Voltage I C = 500mA, I B = 0.5mA 1.3V V BE (sat)Base-Emitter Saturation VoltageI C = 500mA, I B = 0.5mA1.9VSymbol ParameterMax.Units P D Total Device Dissipation Derate above 25°C10008.0mW mW/°C R θJAThermal Resistance, Junction to Ambient125°C/WBSP52NPN Darlington Transistor•This device is designed for applications requiring extremly high current gain at collector currents to 500mA.•Sourced from process 03.SOT-22312431. Base 2. Collector 3. EmitterBSP52TRADEMARKSThe following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.DISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONS Definition of TermsDatasheet Identification Product Status DefinitionAdvance InformationFormative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.PreliminaryFirst ProductionThis datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.No Identification Needed Full ProductionThis datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.Obsolete Not In ProductionThis datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.FASTr™FRFET™GlobalOptoisolator™GTO™HiSeC™I 2C™ISOPLANAR™LittleFET™MicroFET™MicroPak™MICROWIRE™OPTOLOGIC ®OPTOPLANAR™PACMAN™POP™Power247™PowerTrench ®QFET™QS™QT Optoelectronics™Quiet Series™SLIENT SWITCHER ®SMART START™SPM™Stealth™SuperSOT™-3SuperSOT™-6SuperSOT™-8SyncFET™TinyLogic™TruTranslation™UHC™UltraFET ®VCX™ACEx™Bottomless™CoolFET™CROSSVOLT ™DOME™EcoSPARK™E 2CMOS™EnSigna™FACT™FACT Quiet series™FAST ®分销商库存信息: FAIRCHILDBSP52。
7427931;中文规格书,Datasheet资料
7.1 7.0 6.02012-06-272012-04-032009-06-24SStSStSMuSStSMu-Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]C Schematic:F Typical Impedance Characteristics: F Derating Curve:H1: Classification Reflow Profile for SMT components:H2: Classification Reflow ProfilesProfile FeaturePreheat- Temperature Min (T smin ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Ramp-up rate (T L to T P )Liquidous temperature (T L )Time (t L ) maintained above T L Peak package body temperature (T p )Time within 5°C of actual peak temperature (t p )Ramp-down rate (T P to T L )Time 25°C to peak temperature Pb-Free Assembly 150°C 200°C60-180 seconds 3°C/ second max.217°C60-150 seconds See Table H320-30 seconds 6°C/ second max.8 minutes max.refer to IPC/JEDEC J-STD-020DH3: Package Classification Reflow TemperaturePB-Free Assembly PB-Free Assembly PB-Free Assembly Package Thickness< 1.6 mm 1.6 - 2.5 mm ≥ 2.5 mmVolume mm³<350260°C 260°C 250°CVolume mm³350 - 2000260°C 250°C 245°CVolume mm³>2000260°C 245°C 245°Crefer to IPC/JEDEC J-STD-020DH Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-PBFof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the component surface has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the ferrite body and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the ferrite body and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the plating. The washing varnish agent could have a negative effect on the long term function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the ferrite body could flake or in the worst case it could break.Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be sustai-ned.• Wave soldering is only allowed after evaluation and approval.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 7427931。
74270053;中文规格书,Datasheet资料
Bezeichnung :description :Eigenschaften / properties Wert / valueEinheit / unitTol.Impedanz @ 1 Wg./impedance @ 1 turn Impedanz @ 1 Wg./impedance @ 1 turnImpedanz @ 2 Wg./impedance @ 2 turn Impedanz @ 2 Wg./impedance @ 2 turn33%+ 20°C+ 140°C <= 7,6SMU Update 06-06-28LF RoHS update 04-10-11RTUpdate 02-04-17JH Neugestaltung00-12-06NameÄnderung / modificationDatum / dateAWG26 - ø 0,5mm - Länge/length:165 mm100 MHz25 MHz 25 MHz typ.± 25%Z typ.................................................................................................................................................................................................................................................Würth ElektronikZ258Z D Prüfgeräte / test equipment:HP 4191 B für/for Z und/and material 16092A - Klemme / clamp 354100 MHzΩ± 25%195ΩAXIAL FERRITE BEADSWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked 568ZΩBasismaterial / base material:Curietemperatur / curie temperature: ΩDatum / date............................................................................Unterschrift / signature Kontrolliert / approvedTestbedingungen / test conditionsBetriebstemp. / operating temperature: -25°C ~ + 85°CF Werkstoffe & Zulassungen / material & approvals:3 W 800für Kabeldurchmesser / for cable diameter:Lagertemperatur / storage temperature: -55°C ~ + 85°C Kunde / customerFreigabe erteilt / general release:CB Elektrische Eigenschaften / electrical properties:E Testbedingungen / test conditions:Luftfeuchtigkeit / humidity:Umgebungstemperatur / temperature:G Eigenschaften / general specifications:Bezeichnung :description :A:B:SMU Update 06-06-28LF RoHS update 04-10-11RTUpdate 02-04-17JH Neugestaltung00-12-06NameÄnderung / modificationDatum / dateH Impedanzverlauf / impedance curve:2 x durch Bohrung Ferrit / 2 x times through ferrite 1 x durch Bohrung Ferrit / 1 x times trough ferriteFreigabe erteilt / general release:Kunde / customerD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Würth Elektronik eiSos GmbH & Co. KGDATUM / DATE : 2006-06-28AXIAL FERRITE BEADS..................................................................................Datum / dateUnterschrift / signature Würth Elektronik..........................................................................................................................................................................................................................................Geprüft / checked Kontrolliert / approvedThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety andreliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 74270053。
BSP52T3G;BSP52T1;BSP52T1G;BSP52T3;中文规格书,Datasheet资料
MAXIMUM RATINGS (TC = 25°C unless otherwise noted)
Rating
Symbol
Max
Unit
Collector-Emitter Voltage
Collector-Base Voltage
Emitter-Base Voltage
Collector Current
NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCH.
MILLIMETERS
DIM MIN NOM MAX
A 1.50
1.63
1.75
A1 0.02
0.06
0.10
AYW AS3G
G
A
= Assembly Location
Y
= Year
W
= Work Week
AS3 = Specific Device Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Storage Time (VCC = 10 V, IC = 150 mA, IB1 = 0.15 mA, IB2 = 0.15 mA)
Fall Time (VCC = 10 V, IC = 150 mA, IB1 = 0.15 mA, IB2 = 0.15 mA)
3. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2.0%
PBSS4230T,215;PBSS5230T,215;中文规格书,Datasheet资料
Product data sheet2003 Sep 29NPN low V CEsat (BISS) transistorPBSS4230TFEATURES•Low collector-emitter saturation voltage V CEsat•High collector current capability I C and I CM•High efficiency leading to less heat generation •Reduced printed-circuit board requirements•Cost effective alternative to MOSFETs in specific applications.APPLICATIONS•Power management–DC/DC conversion–Supply line switching–Battery charger–LCD backlighting.•Peripheral driver–Driver in low supply voltage applications (e.g. lamps and LEDs)–Inductive load drivers (e.g. relays, buzzers and motors).DESCRIPTIONNPN BISS transistor in a SOT23 plastic package providing ultra low V CEsat and R CEsat parameters.PNP complement: PBSS5230T.MARKINGNote1.* = p: made in Hong Kong.* = t: made in Malaysia.* = W: made in China.QUICK REFERENCE DATA PINNINGTYPE NUMBER MARKING CODE(1) PBSS4230T*3D SYMBOL PARAMETER MAX.UNIT V CEO collector-emitter voltage30VI C collector current (DC)2AI CM peak collector current3AR CEsat equivalent on-resistance200mΩPIN DESCRIPTION1base2emitter3collectorORDERING INFORMATIONTYPE NUMBERPACKAGENAME DESCRIPTION VERSIONPBSS4230T−plastic surface mounted package; 3 leads SOT23NPN low V CEsat (BISS) transistorPBSS4230TLIMITING VALUESIn accordance with the Absolute Maximum Rating System (IEC 60134).Notes1.Device mounted on a FR4 printed-circuit board, single-sided copper, tinplated, standard footprint.2.Device mounted on a FR4 printed-circuit board, single-sided copper, tinplated, mounting pad for collector 1 cm 2.THERMAL CHARACTERISTICS Notes1.Device mounted on a FR4 printed-circuit board, single-sided copper, tinplated, standard footprint.2.Device mounted on a FR4 printed-circuit board, single-sided copper, tinplated, mounting pad for collector 1 cm 2.SYMBOL PARAMETERCONDITIONSMIN.MAX.UNITV CBO collector-base voltage open emitter −40V V CEO collector-emitter voltage open base −30V V EBO emitter-base voltage open collector−5V I C collector current (DC)−2A I CM peak collector current −3AI BM peak base current −300mA P tot total power dissipation T amb ≤ 25 °C; note 1−300mW T amb ≤ 25 °C; note 2−480mW T stg storage temperature −65+150°C T j junction temperature−150°C T amb operating ambient temperature−65+150°CSYMBOL PARAMETERCONDITIONS VALUE UNIT R th j-a thermal resistance from junction to ambientin free air; note 1417K/W in free air; note 2260K/WNPN low V CEsat (BISS) transistorPBSS4230TCHARACTERISTICST amb = 25 °C unless otherwise specified.Note1.Pulse test: t p ≤ 300 μs; δ ≤ 0.02.SYMBOL PARAMETERCONDITIONSMIN.TYP.MAX.UNIT I CBO collector-base cut-off current V CB = 30 V; I E = 0−−100nA V CB = 30 V; I E = 0; T j = 150 °C −−50μA I EBO emitter-base cut-off current V EB = 4 V; I C = 0−−100nAh FEDC current gainV CE = 2 V; I C = 100 mA 350470−V CE = 2 V; I C = 500 mA 300450−V CE = 2 V; I C = 1 A 300420−V CE = 2 V; I C = 2 A150250−V CEsatcollector-emitter saturation voltageI C = 100 mA; I B = 1 mA −4570mV I C = 500 mA; I B = 50 mA −70100mV I C = 750 mA; I B = 15 mA −120180mV I C = 1 A; I B = 50 mA; note 1−130180mV I C = 2 A; I B = 200 mA; note 1−240320mV R CEsat equivalent on-resistance I C = 500 mA; I B = 50 mA; note 1−140200m ΩV BEsat base-emitter saturation voltage I C = 2 A; I B = 200 mA; note 1−− 1.1V V BEon base-emitter turn-on voltage V CE = 2 V; I C = 100 mA −−0.75V f T transition frequency I C = 100 mA; V CE = 10 V; f = 100 MHz100230−MHz C c collector capacitanceV CB = 10 V; I E = I e = 0; f = 1 MHz−1520pFPBSS4230T NPN low V CEsat (BISS) transistorPACKAGE OUTLINENPN low V CEsat (BISS) transistorPBSS4230TDATA SHEET STATUSNotes1.Please consult the most recently issued document before initiating or completing a design.2.The product status of device(s) described in this document may have changed since this document was publishedand may differ in case of multiple devices. The latest product status information is available on the Internet at URL . DOCUMENT STATUS (1)PRODUCT STATUS (2)DEFINITIONObjective data sheet Development This document contains data from the objective specification for product development.Preliminary data sheet Qualification This document contains data from the preliminary specification. Product data sheet ProductionThis document contains the product specification.DISCLAIMERSGeneral ⎯ Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties,expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information.Right to make changes ⎯ NXP Semiconductors reserves the right to make changes to informationpublished in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof.Suitability for use ⎯ NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment orapplications and therefore such inclusion and/or use is at the customer’s own risk.Applications ⎯ Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.Limiting values ⎯ Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability.Terms and conditions of sale ⎯ NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at /profile/terms, including those pertaining to warranty, intellectual property rightsinfringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail.No offer to sell or license ⎯ Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.Export control ⎯ This document as well as the item(s) described herein may be subject to export controlregulations. Export might require a prior authorization from national authorities.Quick reference data ⎯ The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding.NXP SemiconductorsCustomer notificationThis data sheet was changed to reflect the new company name NXP Semiconductors. No changes were made to the content, except for the legal definitions and disclaimers.Contact informationFor additional information please visit: For sales offices addresses send e-mail to: salesaddresses@© NXP B.V. 2009All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.Printed in The Netherlands R75/01/pp7 Date of release: 2003 Sep 29 Document order number: 9397 750 11898分销商库存信息:NXPPBSS4230T,215PBSS5230T,215。
744762156A;中文规格书,Datasheet资料
Bezeichnung :description :Größe / size 1008A 2,5 ± 0,2mmB 2,0 ± 0,2mmC 1,6 ± 0,2mmD 0,5 ref.mm F 0,5 ± 0,1mm H 2,2mm I 0,9mm J1,2mm60 … 70%25°CKeramik/ ceramic AWe Version 104-10-11NameÄnderung / modificationDatum / dateWürth ElektronikENA 5071B für/for SRFD Prüfgeräte / test equipment:Agilent 4287A + HP 16193A für/for L und/and Q HP 4338B für/for R DCHP 4285A + 42841A + 42842C + 42851-6110 für/for IDC Lagerbedingungen / storage conditions: -10°C ~ + 40°C 30 ~ 70% RHF Werkstoffe & Zulassungen / material & approvals:A Mechanische Abmessungen / dimensions:Kunde / customer:744762156AKeramik-SMD-Induktivität WE-KI Ceramic-SMD-Inductor WE-KIArtikelnummer / part number :D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Betriebstemperatur / operating temperature: -40°C ~ +125°C Kunde / customerFreigabe erteilt / general release:...................................................................................................................................................................................................Spezifikation für Freigabe / specification for releaseDATUM / DATE : 2004-10-11Datum / date.............................................................................Unterschrift / signatureKontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGKontaktmaterial / contact plating:Mo/Mn + Ni + AuBasismaterial / base material: E Testbedingungen / test conditions:Umgebungstemperatur / ambient temperature: -40°C ~ + 110°C Luftfeuchtigkeit / humidity:Umgebungstemperatur / temperature:G Eigenschaften / general specifications:This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such asaerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronic equipments, when us electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stageRoHS compliantLFSEITE 1 VON 1/分销商库存信息: WURTH-ELECTRONICS 744762156A。
AS5045-ASST;AS5045-ASSU;AS5045 PB;AS5045 DB V2;AS5045 AB;中文规格书,Datasheet资料
1 General DescriptionThe AS5045 is a contactless magnetic rotary encoder for accurate angular measurement over a full turn of 360°. It is a system-on-chip, combining integrated Hall elements, analog front end and digital signal processing in a single device.To measure the angle, only a simple two-pole magnet, rotating over the center of the chip, is required. The magnet may be placed above or below the IC.The absolute angle measurement provides instant indication of the magnet’s angular position with a resolution of 0.0879° = 4096 positions per revolution. This digital data is available as a serial bit stream and as a PWM signal.An internal voltage regulator allows the AS5045 to operate at either 3.3 V or 5 V supplies.2 BenefitsComplete system-on-chipFlexible system solution provides absolute andPWM outputs simultaneously Ideal for applications in harsh environments due tocontactless position sensing No calibration required3 Key FeaturesContactless high resolution rotational positionencoding over a full turn of 360 degrees Two digital 12bit absolute outputs:- Serial interface and- Pulse width modulated (PWM) output User programmable zero positionFailure detection mode for magnet placementmonitoring and loss of power supply “red-yellow-green” indicators display placement ofmagnet in Z-axis Serial read-out of multiple interconnected AS5045devices using Daisy Chain mode Tolerant to magnet misalignment and airgapvariations Wide temperature range: - 40°C to + 125°CSmall Pb-free package: SSOP 16 (5.3mm x 6.2mm)4 ApplicationsIndustrial applications:- Contactless rotary position sensing - Robotics Automotive applications:- Steering wheel position sensing - Transmission gearbox encoder - Headlight position control - Torque sensing- Valve position sensing Replacement of high end potentiometersFigure 1. Typical Arrangement of AS5045 and MagnetAS504512 Bit Programmable Magnetic Rotary Encoder Data SheetTable of Contents1General Description (1)2Benefits (1)3Key Features (1)4Applications (1)5Pinout (4)5.1Pin Configuration (4)5.2Pin Description (4)6Electrical Characteristics (5)6.1AS5045 Differences to AS5040 (5)6.2Absolute Maximum Ratings (non operating) (6)6.3Operating Conditions (6)6.4DC Characteristics for Digital Inputs and Outputs (7)6.4.1CMOS Schmitt-Trigger Inputs: CLK, CSn. (CSn = internal Pull-up) (7)6.4.2CMOS / Program Input: Prog (7)6.4.3CMOS Output Open Drain: MagINCn, MagDECn (7)6.4.4CMOS Output: PWM (7)6.4.5Tristate CMOS Output: DO (8)6.5Magnetic Input Specification (8)6.6Electrical System Specifications (9)6.7Timing Characteristics (10)6.7.1Synchronous Serial Interface (SSI) (10)6.7.2Pulse Width Modulation Output (11)6.8Programming Conditions (11)7Functional Description (12)8Mode Input Pin (13)8.1Synchronous Serial Interface (SSI) (13)8.1.1Data Content (14)8.1.2Z-axis Range Indication (Push Button Feature, Red/Yellow/Green Indicator) (14)8.2Daisy Chain Mode (15)9Pulse Width Modulation (PWM) Output (16)9.1Changing the PWM Frequency (17)10Analog Output (17)11Programming the AS5045 (18)11.1Zero Position Programming (18)11.2Repeated OTP Programming (18)11.3Non-permanent Programming (19)11.4Analog Readback Mode (20)12Alignment Mode (21)13 3.3V / 5V Operation (22)14Choosing the Proper Magnet (23)14.1Physical Placement of the Magnet (24)15Simulation Modeling (25)16Failure Diagnostics (26)16.1Magnetic Field Strength Diagnosis (26)16.2Power Supply Failure Detection (26)17Angular Output Tolerances (26)17.1Accuracy (26)17.2Transition Noise (28)17.3High Speed Operation (28)17.3.1Sampling Rate (28)17.4Propagation Delays (29)17.4.1Angular Error Caused by Propagation Delay (29)17.5Internal Timing Tolerance (29)17.6Temperature (30)17.6.1Magnetic Temperature Coefficient (30)17.7Accuracy over Temperature (30)17.7.1Timing Tolerance over Temperature (30)18Package Drawings and Markings (31)19Ordering Information (31)20Recommended PCB Footprint (32)5 Pinout5.1 Pin ConfigurationFigure 2. Pin Configuration SSOP165.2 Pin DescriptionTable 1 shows the description of each pin of the standard SSOP16 package (Shrink Small Outline Package, 16 leads, body size: 5.3mm x 6.2mmm; see Figure 2).Pins 7, 15 and 16 supply pins, pins 3, 4, 5, 6, 13 and 14 are for internal use and must not be connected.Pins 1 and 2 MagINCn and MagDECn are the magnetic field change indicators (magnetic field strength increase or decrease through variation of the distance between the magnet and the device). These outputs can be used to detect the valid magnetic field range. Furthermore those indicators can also be used for contact-less push-button functionality.Pin 6 Mode allows switching between filtered (slow) and unfiltered (fast mode). This pin must be tied to VSS or VDD5V, and must not be switched after power up. See chapter 8 Mode Input Pin.Pin 8 Prog is used to program the zero-position into the OTP (see chapter 11.1 Zero Position Programming).This pin is also used as digital input to shift serial data through the device in Daisy Chain configuration, (see chapter 8.2 Daisy Chain Mode).Pin 11 Chip Select (CSn; active low) selects a device within a network of AS5045 encoders and initiates serial data transfer. A logic high at CSn puts the data output pin (DO) to tri-state and terminates serial data transfer. This pin is also used for alignment mode (Figure 14) and programming mode (Figure 10).Pin 12 PWM allows a single wire output of the 10-bit absolute position value. The value is encoded into a pulse width modulated signal with 1µs pulse width per step (1µs to 4096µs over a full turn). By using an external low pass filter, the digital PWM signal is converted into an analog voltage, making a direct replacement of potentiometers possible.Table 1. Pin DescriptionPin Symbol Type Description1MagINCn DO_OD Magnet Field Mag nitude INC rease; active low, indicates a distance reduction between the magnet and the device surface. See Table 52MagDECn DO_OD Magnet Field Mag nitude DEC rease; active low, indicates a distance increase between the device and the magnet. See Table 53 NC - Must be left unconnected4 NC - Must be left unconnectedPin Symbol Type Description 5 NC - Must be left unconnected6Mode - Select between slow (low, VSS) and fast (high, VDD5V) mode. Internal pull-down resistor.7 VSS S Negative Supply Voltage (GND)8Prog_DI DI_PD OTP Prog ramming Input and Data Input for Daisy Chain mode. Internal pull-down resistor (~74kΩ). Connect to VSS if not used9 DO DO_TD ata O utput of Synchronous Serial Interface10 CLK DI,ST Cl oc k Input of Synchronous Serial Interface; Schmitt-Trigger input11 CSn DI_PU,STC hip S elect, active low; Schmitt-Trigger input, internal pull-up resistor (~50kΩ)12 PWM DO P ulse W idth M odulation of approx. 244Hz; 1µs/step (opt. 122Hz; 2µs/step)13 NC - Must be left unconnected14 NC - Must be left unconnected15VDD3V3 S 3V-Regulator Output, internally regulated from VDD5V. Connect to VDD5V for 3V supply voltage. Do not load externally.16 VDD5V S Positive Supply Voltage, 3.0 to 5.5 VDO_OD digital output open drain S supply pinDO digital output DI digital inputDI_PD digital input pull-down DO_T digital output /tri-stateDI_PU digital input pull-up ST Schmitt-Trigger input6 Electrical Characteristics6.1 AS5045 Differences to AS5040All parameters are according to AS5040 datasheet except for the parameters shown below: Building Block AS5045 AS5040Resolution 12bits, 0.088°/step. 10bit, 0.35°/stepData length Read: 18bits(12bits data + 6 bits status)OTP write: 18 bits(12bits zero position + 6 bits mode selection) Read: 16bits(10bits data + 6 bits status)OTP write: 16 bits(10bits zero position + 6 bits mode selection)Incremental encoder Not usedPin 3: not usedPin 4:not usedQuadrature, step/direction and BLDC motorcommutation modesPin 3:incremental output A_LSB_UPin 4:incremental output B_DIR_VPins 1 and 2 MagINCn, MagDECn: same feature asAS5040, additional OTP option for red-yellow-green magnetic range MagINCn, MagDECn indicate in-range or out-of-range magnetic field plus movement of magnet in z-axisPin 6 MODE pin, switch between fast and slowmodePin 6:Index outputPin 12 PWM output: frequency selectable by OTP:1µs / step, 4096 steps per revolution,f=244Hz 2µs/ step, 4096 steps perrevolution, f=122Hz PWM output:1µs / step, 1024 steps per revolution, 976Hz PWM frequencySampling frequency Selectable by MODE input pin:2.5kHz, 10kHzFixed at 10kHz @10bit resolutionBuilding Block AS5045AS5040 Propagation delay 384µs (slow mode) 96µs (fast mode)48µs Transition noise (rms; 1sigma) 0.03 degrees max. (slow mode) 0.06 degrees max. (fast mode)0.12 degreesOTP programming options Zero position, rotational direction, PWMdisable, 2 Magnetic Field indicator modes, 2 PWM frequenciesZero position, rotational direction, incremental modes, index bit width6.2 Absolute Maximum Ratings (non operating)Stresses beyond those listed under “Absolute Maximum Ratings“ may cause permanent damage to the device. These are stress ratings only. Functional operation of the device at these or any other conditions beyond those indicated under “Operating Conditions” is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ParameterSymbol Min Max Unit Note DC supply voltage at pin VDD5V VDD5V -0.3 7 V DC supply voltage at pin VDD3V3 VDD3V35VInput pin voltageV in -0.3VDD5V+0.3 V Except VDD3V3 Input current (latchup immunity) I scr -100 100 mA Norm: JEDEC 78Electrostatic discharge ESD ± 2 kV Norm: MIL 883 E method 3015 Storage temperature T strg-55125°CMin – 67°F ; Max +257°FBody temperature (Lead-free package)T Body 260°C t=20 to 40s,Norm: IPC/JEDEC J-Std-020 Lead finish 100% Sn “matte tin” Humidity non-condensing H585%6.3 Operating ConditionsParameterSymbol Min Typ Max UnitNoteAmbient temperature T amb -40125 °C -40°F…+257°FSupply currentI supp 1621 mA Supply voltage at pin VDD5V Voltage regulator output voltage at pin VDD3V3VDD5V VDD3V3 4.53.0 5.03.3 5.5 3.6 V 5V operationSupply voltage at pin VDD5V Supply voltage at pin VDD3V3 VDD5V VDD3V33.03.03.33.33.6 3.6V3.3V operation(pin VDD5V and VDD3V3 connected)6.4 DC Characteristics for Digital Inputs and Outputs6.4.1 CMOS Schmitt-Trigger Inputs: CLK, CSn. (CSn = internal Pull-up)(operating conditions: T amb = -40 to +125°C, VDD5V = 3.0-3.6V (3V operation) VDD5V = 4.5-5.5V (5V operation) unless otherwise noted) ParameterSymbol Min Max Unit NoteHigh level input voltage V IH 0.7 * VDD5VV Normal operation Low level input voltage V IL0.3 * VDD5VVSchmitt Trigger hysteresis V Ion- V Ioff 1V-1 1 CLK only Input leakage current Pull-up low level input current I LEAK I iL-30 -100µA µA CSn only, VDD5V: 5.0V6.4.2 CMOS / Program Input: Prog(operating conditions: T amb = -40 to +125°C, VDD5V = 3.0-3.6V (3V operation) VDD5V = 4.5-5.5V (5V operation)unless otherwise noted) ParameterSymbol Min Max Unit Note High level input voltage VIH 0.7 * VDD5VVDD5VVHigh level input voltage VPROG See Programming ConditionsV During programming Low level input voltage VIL 0.3 * VDD5VVHigh level input current IiL30100µAVDD5V: 5.5V6.4.3 CMOS Output Open Drain: MagINCn, MagDECn(operating conditions: T amb = -40 to +125°C, VDD5V = 3.0-3.6V (3V operation) VDD5V = 4.5-5.5V (5V operation)unless otherwise noted) ParameterSymbolMinMax UnitNote Low level output voltage V OL VSS+0.4 V Output currentI O4 2mAVDD5V: 4.5V VDD5V: 3VOpen drain leakage current I OZ 1 µA6.4.4 CMOS Output: PWM(operating conditions: T amb = -40 to +125°C, VDD5V = 3.0-3.6V (3V operation) VDD5V = 4.5-5.5V (5V operation)unless otherwise noted) ParameterSymbolMinMax UnitNoteHigh level output voltage V OH VDD5V-0.5 V Low level output voltage V OL VSS+0.4 V Output current I O4 2mA mAVDD5V: 4.5V VDD5V: 3V6.4.5 Tristate CMOS Output: DO(operating conditions: T amb = -40 to +125°C, VDD5V = 3.0-3.6V (3V operation) VDD5V = 4.5-5.5V (5V operation) unless otherwise noted) ParameterSymbolMinMax UnitNoteHigh level output voltage V OH VDD5V –0.5VLow level output voltage V OL VSS+0.4 VOutput currentI O4 2mAmAVDD5V: 4.5V VDD5V: 3VTri-state leakage current I OZ 1 µA6.5 Magnetic Input Specification(operating conditions: T amb = -40 to +125°C, VDD5V = 3.0-3.6V (3V operation) VDD5V = 4.5-5.5V (5V operation)unless otherwise noted)Two-pole cylindrical diametrically magnetised source: ParameterSymbolMinTypMaxUnitNoteDiameter d mag 4 6 mm Thickness t mag 2.5 mm Recommended magnet: Ø 6mm x 2.5mm forcylindrical magnets Magnetic input fieldamplitude B pk 4575 mTRequired vertical component of the magnetic field strength on the die’s surface, measured along a concentric circle with a radius of 1.1mm Magnetic offset B off ± 10mT Constant magnetic stray field Field non-linearity5 %Including offset gradient2.44146 rpm @ 4096 positions/rev.; fast modeInput frequency (rotational speed of magnet)f mag_abs0.61Hz36.6rpm @ 4096 positions/rev.; slow mode Displacement radiusDisp0.25mmMax. offset between defined device center and magnet axis (see Figure 18) Eccentricity Ecc 100µm Eccentricity of magnet center to rotational axis-0.12NdFeB (Neodymium Iron Boron) Recommended magnetmaterial andtemperature drift -0.035%/KSmCo (Samarium Cobalt)6.6 Electrical System Specifications(operating conditions: T amb = -40 to +125°C, VDD5V = 3.0~3.6V (3V operation) VDD5V = 4.5~5.5V (5V operation) unless otherwise noted) ParameterSymbolMinTypMaxUnitNoteResolution RES 12 bit 0.088 deg Integral non-linearity (optimum)INL opt± 0.5 deg Maximum error with respect to the best line fit. Centered magnet without calibration, T amb =25 °C. Integral non-linearity (optimum)INL temp± 0.9 degMaximum error with respect to the best line fit. Centered magnetwithout calibration, T amb = -40 to +125°CIntegral non-linearity INL ± 1.4 degBest line fit =(Err max – Err min ) / 2Over displacement tolerance with 6mm diameter magnet, without calibration,T amb = -40 to +125°C Differential non-linearity DNL ±0.044 deg 12bit, no missing codes 0.06 1 sigma, fast mode (MODE = 1)Transition noiseTN0.03deg RMS1 sigma, slow mode (MODE=0 or open)Power-on reset thresholds On voltage; 300mV typ. hysteresisOff voltage; 300mV typ. hysteresisV on V off 1.37 1.08 2.2 1.9 2.9 2.6VDC supply voltage 3.3V (VDD3V3)DC supply voltage 3.3V (VDD3V3)20Fast mode (Mode = 1); until status bit OCF = 1Power-up timet PwrUp80msSlow mode (Mode = 0 or open); until OCF = 196Fast mode (MODE=1)System propagation delay absolute output : delay of ADC, DSP and absolute interfacet delay384µsSlow mode (MODE=0 or open) 2.48 2.61 2.74T amb = 25°C, slow mode (MODE=0 or open)Internal sampling rate for absolute output:f S2.35 2.61 2.87 kHzT amb = -40 to +125°C, slow mode (MODE=0 or open) 9.90 10.42 10.94T amb = 25°C, fast mode (MODE = 1)Internal sampling rate forabsolute outputf S9.38 10.42 11.46kHz T amb = -40 to +125°C, : fast mode (MODE = 1)Read-out frequency CLK1MHz Max. clock frequency to read out serial dataFigure 3. Integral and Differential Non-linearity (example)Integral Non-Linearity (INL) is the maximum deviation between actual position and indicated position. Differential Non-Linearity (DNL) is the maximum deviation of the step length from one position to the next. Transition Noise (TN) is the repeatability of an indicated position6.7 Timing Characteristics6.7.1Synchronous Serial Interface (SSI)(operating conditions: T amb = -40 to +125°C, VDD5V = 3.0~3.6V (3V operation) VDD5V = 4.5~5.5V (5V operation) unless otherwise noted) ParameterSymbol MinTypMaxUnitNoteData output activated (logic high)t DO active 100 nsTime between falling edge of CSn and dataoutput activated First data shifted to output registert CLK FE500 nsTime between falling edge of CSn and firstfalling edge of CLKStart of data output T CLK / 2 500nsRising edge of CLK shifts out one bit at a timeData output valid t DO valid357 375 394 nsTime between rising edge of CLK and dataoutput validData output tristate t DO tristate100 nsAfter the last bit DO changes back to“tristate”Pulse width of CSn t CSn 500ns CSn = high; To initiate read-out of next angular position Read-out frequencyf CLK>01MHzClock frequency to read out serial data分销商库存信息:AMSAS5045-ASST AS5045-ASSU AS5045 PB AS5045 DB V2AS5045 AB。
742792651;中文规格书,Datasheet资料
5.1 5.0 4.02012-06-262012-03-292005-12-16SStSStSStSStSMu-Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Impedance Characteristics:Test Equipment: E4991A or equivalentF Derating Curve:H1: Classification Reflow Profile for SMT components:H2: Classification Reflow ProfilesProfile FeaturePreheat- Temperature Min (T smin ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Ramp-up rate (T L to T P )Liquidous temperature (T L )Time (t L ) maintained above T L Peak package body temperature (T p )Time within 5°C of actual peak temperature (t p )Ramp-down rate (T P to T L )Time 25°C to peak temperature Pb-Free Assembly 150°C 200°C60-180 seconds 3°C/ second max.217°C60-150 seconds See Table H320-30 seconds 6°C/ second max.8 minutes max.refer to IPC/JEDEC J-STD-020DH3: Package Classification Reflow TemperaturePB-Free Assembly PB-Free Assembly PB-Free Assembly Package Thickness< 1.6 mm 1.6 - 2.5 mm ≥ 2.5 mmVolume mm³<350260°C 260°C 250°CVolume mm³350 - 2000260°C 250°C 245°CVolume mm³>2000260°C 245°C 245°Crefer to IPC/JEDEC J-STD-020DH Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-CBFof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the component surface has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the ferrite body and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the ferrite body and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the plating. The washing varnish agent could have a negative effect on the long term function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the ferrite body could flake or in the worst case it could break.Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be sustai-ned.• Wave soldering is only allowed after evaluation and approval.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 742792651。
BAS21W,115;BAS21AW,115;BAS21SW,115;中文规格书,Datasheet资料
6. Thermal characteristics
Table 7. Thermal characteristics
Symbol Parameter
Per device
Rth(j-a)
thermal resistance from junction to ambient
[1] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China
5. Limiting values
Marking code[1] X4* X6* X5*
Table 6. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134).
150
200
250
VR (V)
(1) Tamb = 150 °C (2) Tamb = 85 °C (3) Tamb = 25 °C (4) Tamb = −40 °C
Fig 3. Reverse current as a function of reverse voltage; typical values
1.3 Applications
I High-speed switching I General-purpose switching
I Voltage clamping I Reverse polarity protection
1.4 Quick reference data
Table 2. Quick reference data
PMBTA45,215;中文规格书,Datasheet资料
NXP Semiconductors
PMBTA45
500 V, 150 mA NPN high-voltage low VCEsat (BISS) transistor
7. Characteristics
Table 7. Characteristics Tamb = 25 °C unless otherwise specified.
Typ Max Unit
-
100 nA
-
10
μA
-
100 nA
-
100 nA
100 -
100 -
60
75
65
90
0.75 0.9
35
-
4
-
200 -
80
-
2700 -
2780 -
3400 -
800 -
4200 -
mV mV V
MHz
pF
pF
ns ns ns ns ns ns
PMBTA45_2
Product data sheet
[1] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China
Marking code[1] LK*
Version SOT23
PMBTA45_2
Product data sheet
2. Pinning information
Table 2. Pin 1 2 3
Pinning Description base emitter collector
Simplified outline Graphic symbol
BYT52中文资料
Document Number 86029 Rev. 2, 24-Jun-98
www.vishay.de • FaxBack +1-408-970-5600 1 (4)
元器件交易网
BYT52.
Vishay Telefunken Characteristics (Tj = 25_C unless otherwise specified)
Electrical Characteristics
Tj = 25_C Parameter Forward voltage Reverse current Reverse recovery time Test Conditions IF=1A VR=VRRM VR=VRRM, Tj=150°C IF=0.5A, IR=1A, iR=0.25A Type Symbol VF IR IR trr Min Typ Max 1.3 5 150 200 Unit V mA mA ns
It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.
74271358;中文规格书,Datasheet资料
5.1 5.0 4.02012-06-272012-05-022007-01-30SStSStKSCSStSMu-Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]D2 General Properties:Cable diameter Ferrite core Ferrite core Ferrite core Plastic housing Test cable Test cablePropertiesCable diameter Material Initial permeability Curie temperature Flammability ClassificationApplicable cable Applicable cable lengthµi T CValue ≤26.54 W 620620150UL94-V0AWG26165Unit mm°Cmm Tol.typ.typ.F Typical Impedance Characteristics:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-NCFof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the component surface has to be avoided.The packaging of the product is to encase the needed humidity of the plastic housing. To ensure the humidity level, the products have to be stored in this delivered packaging. If not, the products are losing their humidity. In this case you can re-condition the components according to the internal standard WE1883 to ensure the necessary humidity in the plastic.To ensure the operating mode of the product, the ambient temperature at processing (when the part will be mounted on the cable) has to be in the range of 15 to 25 °C.Before mounting, the part should be stored for one hour in this condition.The responsibility for the applicability of customer specific products and the use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Direct mechanical impact to the product and the forcible closing of this shall be prevented as the ferrite material of the ferrite body or the pla-stic housing could flake or in the worst case it could break.Product specific:Follow all instructions mentioned in the datasheet, especially:•The cable diameter must be pointed out, otherwise no warranty will be sustained.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 74271358。
74275815;中文规格书,Datasheet资料
A Dimensions: [mm] Array Additional FeaturesSafety key to lock/ unkock74271D2 General Properties:Ferrite core Ferrite core Ferrite core Plastic housing Plastic housing Test cable Test cablePropertiesMaterial Initial permeability Curie temperatureColourFlammability ClassificationApplicable cable Applicable cable lengthµi T CValue 4 W 620620150Grey UL94-V0AWG26150Unit°Cmm Tol.typ.typ.F Typical Impedance Characteristics:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-STAR BUENOof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the component surface has to be avoided.The packaging of the product is to encase the needed humidity of the plastic housing. To ensure the humidity level, the products have to be stored in this delivered packaging. If not, the products are losing their humidity. In this case you can re-condition the components according to the internal standard WE1883 to ensure the necessary humidity in the plastic.To ensure the operating mode of the product, the ambient temperature at processing (when the part will be mounted on the cable) has to be in the range of 15 to 25 °C.Before mounting, the part should be stored for one hour in this condition.The responsibility for the applicability of customer specific products and the use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Direct mechanical impact to the product and the forcible closing of this shall be prevented as the ferrite material of the ferrite body or the pla-stic housing could flake or in the worst case it could break.Product specific:Follow all instructions mentioned in the datasheet, especially:•The cable diameter must be pointed out, otherwise no warranty will be sustained.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 74275815。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
A Product Line of Diodes Incorporated80V NPN SILICON PLANAR DARLINGTON TRANSISTORIN SOT89Features• BV CEO > 80V • High current gain • Max Continuous Current I C = 500mA • Fast switching • Lead Free, RoHS Compliant (Note 1) • Halogen and Antimony Free, “Green” Device (Note 2) • Qualified to AEC-Q101 Standards for High ReliabilityMechanical Data• Case: SOT89 • Moisture Sensitivity: Level 1 per J-STD-020 • UL Flammability Rating 94V-0 • Terminals: Matte Tin Finish • Weight: 0.052 grams (Approximate)Ordering Information (Note 3)Product Marking Reel size (inches) Tape width (mm) Quantity per reel BST52TAAS3 7 121,000Notes:1. No purposefully added lead.2. Halogen and Antimony Free. Diodes Inc’s “Green” Policy can be found on our website at 3. For packaging details, go to our website at Marking InformationTop ViewSOT89 Device symbol Top View Pin-outAS3 = Product Type Marking CodeMaximum Ratings @T A = 25°C unless otherwise specifiedCharacteristic Symbol Value UnitCollector-Base Voltage V CBO 90 V Collector-Emitter Voltage V CEO 80 V Emitter-Base Voltage V EBO 10 V Continuous Collector Current I C 500 mA Peak Pulse Current I CM 1.5 A Base Current I B 100 mAThermal Characteristics @T A = 25°C unless otherwise specifiedCharacteristic Symbol Value UnitPower Dissipation (Note 4) P D1 W Thermal Resistance, Junction to Ambient (Note 4) R θJA125 °C/W Thermal Resistance, Junction to Leads (Note 5) R θJL8.66 °C/W Operating and Storage Temperature Range T J,T STG-55 to +150 °C Notes:4. For a device surface mounted on 25mm X 25mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; the device is measuredwhen operating in a steady-state condition.5. Thermal resistance from junction to solder-point (on the exposed collector pad).Thermal Characteristics0.00.20.40.60.81.0Derating CurveTemperature (°C)M a x P o w e r D i s s i p a t i o n (W )020*********120Transient Thermal ImpedanceT h e r m a l R e s i s t a n c e (°C /W )Pulse Width (s)110100Pulse Power DissipationPulse Width (s)MElectrical Characteristics@T A = 25°C unless otherwise specifiedCharacteristic SymbolMinTyp.MaxUnitTestCondition Collector-Base Breakdown Voltage BV CBO90 - - VI C = 10µACollector-Emitter Breakdown Voltage (Notes 6) BV CEO80 - - VI C = 10mAEmitter-Base Breakdown Voltage BV EBO10 - - VI E = 10µACollector Cutoff Current I CES- - 10 µAV CE = 80VEmitter Cutoff Current I EBO- - 10 µAV EB = 8VDC current transfer Static ratio (Notes 6) h FE 10002000- -I C = 150mA, V CE = 10VI C = 500mA, V CE = 10VCollector-Emitter Saturation Voltage (Notes 6) V CE(sat)- - 1.31.3VI C = 500mA, I B = 0.5mAI C = 500mA, I B = 0.5mA, T J=150°CBase-Emitter Saturation Voltage (Notes 6) V BE(sat)- - 1.9 VI C = 500mA, I B = 0.5mATurn On Time t ON- 0.4- µsI C = 500mA,I Bon = I Boff = 0.5mATurn Off Time t OFF 1.5 Notes: 6. Measured under pulsed conditions. Pulse width ≤ 300μs. Duty cycle ≤2%.Typical Electrical CharacteristicsPackage Outline DimensionsSuggested Pad LayoutSOT89Dim Min MaxA 1.40 1.60B 0.44 0.62B1 0.35 0.54C 0.35 0.43D 4.40 4.60D1 1.52 1.83E 2.29 2.60e 1.50Type1 3.00TypH 3.94 4.25L 0.89 1.20All Dimensions in mmDimensions Value (in mm)X 0.900X1 1.733X2 0.416Y 1.300Y1 4.600Y2 1.475Y3 0.950Y4 1.125C 1.500HCA Product Line ofDiodes IncorporatedIMPORTANT NOTICEDIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages.Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.LIFE SUPPORTDiodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:A. Life support devices or systems are devices or systems which:1. are intended to implant into the body, or2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in thelabeling can be reasonably expected to result in significant injury to the user.B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause thefailure of the life support device or to affect its safety or effectiveness.Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.Copyright © 2011, Diodes Incorporated分销商库存信息: DIODESBST52TA。