___环境工程考博专业课真题-

___环境工程考博专业课真题- Water n Control Engineering (Part One)
1.___.
2.How to calculate the oxygen demand in the A/O process?
3.Design a treatment process for high-___ containing a large amount of sulfate (SO42-) ___.
4.Final disposal method for sludge with high phosphorus content.
5.___ sludge.
6.___.
7.___.
8.Discuss the ___ of water resources in China from the ___.
Water n Control Engineering (Part Two)
1.___ n?
2.___.
3.Mechanism and ___.
4.___.
5.___ sludge.
6.Design a treatment process for high-___ containing a large amount of sulfate (SO42-) ___.
7.Discuss the ___ of water resources in China from the ___.
Water n Control Engineering (Part Three)
1.n and form of urban drainage systems and their ___.
2.Urban ___.
3.n of wastewater reuse。

___。

and influencing factors.
4.___ compared to urban sewage and treatment methods.
5.What are rity pollutants and what are the treatment methods?
6.Types and control of water ___.
7.___.
8.___.
Water n Control Engineering (Part Four)
1.What are the hazards of using a small R value for n multiple?
2.How to remove interference when Cl- exceeds 30mg/l in water testing?
3.___.
4.___.
5.Material balance ___。

ds/dt=-kXS。

and solve for K.
6.___.
7.Role of anaerobic process in the phosphorus system.
8.Difference ___.
9.Mechanism and role of air ___.
10.Significance of green products and green ___.
11.___.
Water n Control Engineering (Part Five)
1.What is the urban sewage drainage system and when should it be applied?
2.Mechanism and characteristics of sludge method and membrane method。

and their differences.
3.Chemical methods ___.
4.Characteristics of sludge produced in physical。

chemical。

and logical treatment in sewage treatment。

and disposal methods.
5.___.
6.___.
7.Characteristics and treatment methods of ___.
8.___.
___ (Part One)
1.n of ___。