VC565DN 摄像机(枪机)说明书
摄像机使用说明书
摄像机使用说明书一、前言感谢您选择我们的摄像机产品。
本使用说明书将详细介绍摄像机的功能和正确使用方法，帮助您更好地操作和利用该产品。
二、产品概述1. 外观描述我们的摄像机外观精美、简洁，采用高品质材料打造而成，具有耐用性和美观性。
产品包括主机、摄像头、电源线等组成部分。
2. 技术特点（此处可根据实际产品技术特点进行描述，例如分辨率、视角范围、支持的存储设备等）三、安装与设置1. 安装要求在摄像机安装前，请仔细阅读以下安装要求，确保设备正常工作：（此处描述安装要求，例如摄像机安装位置、电源要求、网络连接要求等）2. 安装步骤（此处根据实际产品提供安装步骤进行描述，可以包括连接摄像头和主机、电源线和电源插座、网络连接等）3. 设置步骤（此处根据实际产品提供设置步骤进行描述，例如网络设置、录像设置、时间同步等）四、功能操作1. 开机与关机为了正确操作摄像机，以下是开机与关机的步骤：（此处描述开关机步骤，例如按电源按钮、远程遥控器等）2. 预览和录像（此处描述预览和录像的操作方法，例如通过手机App、电视、电脑等不同设备进行预览和录像）3. 控制和调整（此处描述控制和调整摄像机的相关功能，例如变焦、调节亮度和对比度等）4. 存储和备份（此处描述存储和备份录像的方法，例如存储到SD卡、云存储等）五、故障排除在使用摄像机的过程中，可能会遇到一些故障情况。
以下是常见故障及排除方法：（此处描述常见故障和解决方法，例如摄像机无法启动、画面模糊、无法连接网络等）六、注意事项在使用摄像机时，请务必注意以下事项，以确保您的安全和设备的正常运行：（此处描述注意事项，例如防水防尘要求、避免摄像机过热、保护个人隐私等）七、维护与保养为了保证摄像机的正常使用寿命和性能，以下是维护和保养的建议：（此处描述维护和保养建议，例如定期清洁、防止摄像机受损等）八、技术支持如您在使用过程中遇到任何问题或需要进一步的帮助，请随时联系我们的技术支持团队。
姆米亚C系列摄像机配件说明书
conventional single exposure attachment for the MAMlYA C series cannot be utilized on this camera.
Magnification of this finder is approximately 2.5 times the image on the ground glass focusing screen, particularly bright and clear.
CdS Porrofinder
This is a Porrofinder with built-in CdS exposure meter Match the index needles within the finder by turning the dial on the back of the f i n d e r , a n d r e a d t h e dial scale. This device measures the amount of light traveling through the viewing lens offering corrrect exposure setting even for amateurs.
for the Mamiya Press and Mamiya RB.
24
H Accessories
Single Exposure Attachment
By using the single exposure attachment provided, single exposures can be made of dry plates (2 1/2 x 3 1/2 in., 6.5x9cm) or cut films (4 3/4 x 6 1/2 in. cut film divided into four 1/4 sizes or 2 1/2 x 3 1/2 in.) When using 4 3/4 x 6 1/2 in. cut film divided into four one-quarter sizes, use a J-type film sheath. When using 2 1/2 x 3 1/2 in. film, use a D-type film sheath.
摄像机操作指导书
摄像机操作指导书1. 简介本指导书旨在帮助用户正确地操作摄像机设备。
请按照以下步骤进行操作，以确保获得最佳的拍摄效果。
2. 准备工作在开始操作摄像机之前，请确保已经完成以下准备工作：- 摄像机已经正确连接到电源并开启。
- 镜头已经清洁，并且摄像机的视角没有被阻挡。
- 存储介质（如SD卡）已经插入摄像机。
- 如果需要，摄像机已经与其他设备（如电脑或显示屏）正确连接。
3. 操作步骤请按照以下步骤操作摄像机：1. 打开摄像机电源，确保摄像机已经完全启动。
2. 使用摄像机上的菜单按钮或触摸屏，进入主菜单界面。
3. 通过主菜单界面，您可以选择不同的拍摄模式和设置选项。
请根据您的需求进行选择。
4. 如果需要进行相机参数的调整，如曝光、对焦等，请在设置选项中找到相应的调整菜单，并按照提示进行操作。
建议先阅读摄像机说明书以了解不同参数的具体作用。
5. 选择您要拍摄的场景或对象，通过摄像机的取景器或触摸屏，确认画面构图。
6. 按下摄像机上的录像按钮或触摸屏上的录像图标，开始录制视频。
7. 当您完成录制时，按下停止按钮或停止图标，结束录像。
8. 如果需要，您可以进行视频回放和编辑，以及其他相关操作。
请参阅摄像机说明书，了解更多操作细节。
9. 在操作完成后，关闭摄像机电源。
同时，记得及时备份您的视频文件，以防止意外数据丢失。
4. 注意事项在操作摄像机时，请注意以下事项：- 避免在摄像机工作时强行拔出存储介质，以免损坏文件。
- 避免在摄像机镜头上触摸或刮擦物体，以免损坏镜片。
- 在拍摄过程中，尽量保持摄像机的稳定，以获得清晰、稳定的画面。
- 如有需要，可以使用三脚架或稳定器等辅助设备，提高拍摄质量。
- 根据需要，及时清理和充电摄像机的电池，确保其正常工作。
- 遵守法律法规，尊重他人隐私，并遵循当地的拍摄规定。
5. 总结通过本操作指导书，您应该能够正确地操作摄像机设备，并获得满意的拍摄效果。
如果您在操作过程中遇到问题，请及时参阅摄像机说明书，或与摄像机厂商进行联系与咨询。
DS-2CE56D5T-AIRZ 2MP CMOS 电机变焦红外球形摄像头说明书
• 2 Megapixel high-performance CMOS• Analog HD output, up to 1080P resolution• 2.8 – 12mm motorized vari-focal lens• True Day/Night• OSD menu, 3D DNR, Smart IR• Up to 30m IR distance• Up the Coax(HIKVISION-C, Pelco-C protocol)• 24V AC/ 12V DCKey FeaturesSpecificationsCameraImage Sensor2MP CMOS Image SensorSignal System PAL/NTSCEffective Pixels1944(H)*1092(V)Min. illumination0.01 Lux @ (F1.2,AGC ON),0 Lux with IR; 0.014 Lux @ (F1.4,AGC ON),0 Lux with IR Shutter Time1/25(1/30)s to 1/50,000sLens MotorizedVFlens;************* Angle of view: 103°- 32.1°Lens Mount φ14Day & Night ICRAngle Adjustment Pan: 0 - 355°, Tilt: 0 - 75°, Rotation: 0 - 355°Synchronization Internal synchronizationWDR 120dBVideo Frame Rate 1080p@25fps/1080p@30fpsHD Video Output 1 Analog HD outputCVBS Output 1Vp-p Composite Output(75Ω/BNC)S/N Ratio ＞62dBMenuScene Indoor, Outdoor, Indoor1, LOW-LIGHT Camera ID On/off (15 characters, position programmable) AGC SupportD/N Mode Color/BW/EXTWhite Balance ATW, AWC-SET, Indoor, Outdoor, Manual Privacy Mask On/Off, maximum 8 zonesMotion Detection On/Off, maximum 4 zonesBLC SupportAnti-flicker On/OffLanguage English, Japanese, CHN1, CHN2, Korean, German, French, Italian, Spanish, Polish, Russian, Portuguese, Dutch, Turkish, Hebrew and ArabicFunctions HSBLC, Digital noise reduction, Digital zoom(62x), Slow shutter, Mirror, Defog, Defect pixel correction, SMART D-ZOOMGeneralOperating Conditions -20 °C - 45 °C (-4 °F - 113 °F), Humidity 90% or less (non-condensing)Power Supply 12 VDC±15%, 24 VAC±15%Power Consumption Max. 6WIR Range Up to 30mCommunication Up the coax, Protocol: Pelco-C(CVBS output), HIKVISION-C(TVI output)Dimensions Φ 136 × 101 mm (Φ 5.35” × 3. 98”)Weight 560 gDimensions20150918 AccessoriesOrder ModelsDS-2CE56D5T-AIRZDS-1273ZJ-130 DS-1275ZJ DS-1276ZJ DS-1271ZJ-130 DS-1273ZJ-130B Wall Mount Vertical Pole Mount Corner Mount Pendant Mount Wall MountDS-1241ZJ DS-1253ZJ-L DS-1250ZJ DS-1H18 DS-TT-X41T In-ceiling Mount Rain Shade Rain Shade Video Balun TVI TesterUnit: mm。
马尔兹拉德电子V-LCD56MD 5.6英寸摄像头顶部监视器操作指南说明书
Marshall ElectronicsModel No.V-LCD56MDInput/Output5.6”Camera-Top Monitor with ModularOperating InstructionsEdition3Revision6W1This page intentionally left blank 2Table of ContentsInstallation and Initial Setup------------------------------------------------------------------------------------------------------5 Top and Front Panel Features----------------------------------------------------------------------------------------------------6 Rear Panel Features-----------------------------------------------------------------------------------------------------------------7 Compatible Input Formats---------------------------------------------------------------------------------------------------------8 MAIN MENU AND NAVIGATION--------------------------------------------------------------------------------------------------9 Using the menu buttons (9)Using the RotoMenu(BRIGHT)knob (9)Scaling Submenu (10)Color Submenu (13)Markers Submenu (15)Filters Submenu (17)Audio Submenu (22)Signal Analysis Submenu (23)User Settings Submenu (24)System Submenu (26)Specifications-----------------------------------------------------------------------------------------------------------------------28 Dimensions--------------------------------------------------------------------------------------------------------------------------29 Maintenance------------------------------------------------------------------------------------------------------------------------30 Warranty----------------------------------------------------------------------------------------------------------------------------303This page intentionally left blank 4Installation and Initial Setup■UnpackingCarefully unpack the V-LCD56MD monitor and verify that the following items are included:•V-LCD56MD Monitor•V-PS12V-2A-R/APower Supply•Operating InstructionsInspect the unit for any physical damage that may have occurred during shipping.Should there be any damage,immediately contact Marshall Electronics at(800)800-6608.If you are not located within the continental United States,call+1(310)333-0606.■Connections,Power-On and Initial SetupPlug the power supply into an AC power source(100-240V@50/60Hz).Attach the Power connector to the back of the monitor. Connect the required cables for video signal input and output.(Power must be applied to the V-LCD56MD for the active loop-though output to be activated.)The monitor defaults to‘ON’when power is supplied.Video will automatically be detected and displayed on the screen.56Top and Front PanelFeaturesInput Select ButtonUse the Input select button to switch between theon-boardMenu Navigation ButtonsUse the Menu, ↑, ↓, and Select buttons to display andnavigate the on-screen menu.See MAIN MENU AND NAVIGATION for details on using theMenu.User Control KnobThe USER control knob can be customized to control multiplefor moreinformation.7Rear PanelFeaturesPower SwitchThis power switch controls power to the monitor from the DC Power Connector or the custom Battery Adaptor.The monitor will always attempt to draw power from the DC connector first if both the DC Power Connector and a Battery are installedsimultaneously.Module SlotUs the Module slot to install any of the compatible MD Series modules.This will function as your second video input oroutput.Battery Adaptor MountUse this area to attach an optional battery mount.Severalpopular batteries are supported.Contact Marshall Electronicsfor a complete list of supportedmounts.Compatible Input FormatsMD-3GE525i/60,625i/50720p/25,29.97,30,50,59.94,601080p/23.98,23.98sF,24,24sF,25,29.97,301035i/59.94,601080i/50,59.94,603G–Level AYCbCr,RGB1080p/60,59.94,50MDO-3G(converted from HDMI to SDI)720p/50,59.94,601080p/23.98,24,25,29,301080p/50,59.94,601080i/50,59.94,60HDMI Input480p59.94,576p50720p/25,29.97,30,50,59.94,601080p/23.98,23.98sF,24,24sF,25,29.97,301080p/50,59.94,601035i/59.94,601080i/50,59.94,60*MDO-3G Module Output is converted from HDMI Input.HDCP protected content will not be looped through8MAIN MENU AND NAVIGATIONAccess and navigate the main menu using the4menu buttons or the RotoMenu™knob:Main MenuUsing the menu buttons•Press the MENU button to enter the main menu.•Use the↑and↓buttons to scroll through the main menu or each submenu.•Press the SELECT button to enter a submenu or choose a setting.•Press the MENU button to exit the main menu,or return to the main menu from a submenu.Using the RotoMenu(BRIGHT)knobThe Marshall Electronics RotoMenu concept has been brought to our line of camera top monitors to make navigating the Main Menu easier than ever.To RotoMenu functionality has been integrated into the BRIGHT knob,so that whenever the Main Menu is up,•Press the MENU button to enter the main menu.•Rotate the BRIGHT knob to scroll up or down in the main menu or each submenu.•Press the BRIGHT knob to enter a submenu or choose a setting.By default,the menu automatically times out after15seconds of being idle.910Scaling SubmenuUse the Scaling submenu to adjust various scaling options and to allow greater control of how your video signal is shown on thedisplay.■Input CropEnable the Input Crop function to select the area of active video that you would like shown on the image display.Select the desired Input by accessing the Adjust option below the main function:AdjustUse the BRIGHT knob to move the selection box LEFT and e the COLOR knob to move the selection box UP and DOWN.Use the CONTRAST knob to move the right border LEFT and RIGHT.Use the USER knob to move the bottom border UP andDOWN.Scaling SubmenuWhen you are satisfied with the position,press the SELECT button or press the BRIGHT knob to confirm your selection.The new cropped selection will be displayed on the screen.If your Aspect Ratio is set to AUTO,the monitor will select the closest aspect ratio to the dimensions of your customized Input.■Aspect RatioUse this menu option to switch between several aspect ratio settings.•In4:3mode,images are scaled up or down to fill the maximum4:3portion of the screen.•In16:9mode,images are scaled to fill the entire16:9screen.•In Full Screen,images are scaled to fill the entire screen.•In Custom mode,images scaling is adjusted to your selection in the Adjust portion of the menu:AdjustUse any of the rotary knobs to select your desired aspect ratio.Some of the more common aspect ratio settings are shown on the Aspect Ratio selection widget.As you move along the scale,your current aspect ratio will be displayed below the widget.Aspect Ratio selection widgetCustom Aspect Ratio selection■Pixel-to-PixelUse this setting to enable Pixel-to-Pixel mode.This mode bypasses the monitor’s internal scaling function and displays images in their native resolution and aspect ratio,with a one-to-one mapping of incoming image pixels to screen pixels:•For incoming formats smaller than the native resolution of the screen(or selected aspect ratio),the image will be displayed in the center of the screen using only the necessary LCD pixels.For example,720p images will occupy exactly1280x720 pixels in the center of the screen.The surrounding screen area will be black.To select a Custom Pixel to Pixel zone,enter the Adjust function:AdjustThe outer square represents the entire image and the inner grey box represents your current Pixel to Pixel selection. Use the COLOR knob to move your selection LEFT and e the CONTRAST knob to move your selection UP or DOWN. Press the SELECT button or the ROTOMENU knob to lock in your selection.■DSLR PresetUse the DSLR Preset option to reduce the visibility of on screen indicators shown with popular DSLR cameras.The available options are:•NK16:9•NK3:2•CN16:9•CN3:2SubmenuColorIMD Configuration Submenu■TemperatureUse this setting to choose one of three color temperature presets:•D55(5500K)•D65(6500K)•D93(9300K)•Custom(Adjustable Color Bias and Gain)•Linear(No processing is applied to the panel)■Bias&GainSelect this submenu to fine-tune the monitor’s color balance(R,G,B).This should only be done by someone experienced with video engineering,as this will alter the overall color shading of the screen.The purpose is to allow color matching to other types of monitors and/or displays.Note:The Color Temperature preset will automatically switch to Custom when Color Bias settings are adjusted.It is normal for color bias adjustments to be very subtle.When selecting the RGB Bias and Gain submenu,bias adjustment indicators will appear at the top of the screen,and gain adjustment indicators will appear at the bottom of thescreen:Use the ▲and ▼buttons to select each individual bias or gain control.Highlighting the BIAS or GAIN icons enables a groupchange of the Red,Green and Blue color components,respectively.Alternatively,you can use the BRIGHT knob to scroll through the different color components and settings.After selecting the color component to adjust,use the ▲and ▼buttons to increase or decrease the value.■GammaUse the Gamma setting to adjust the value of the gamma applied to incoming video signals.The default gamma value is 2.2.Gamma correction represents the relationship between the pixel levels from your incoming video and the luminance of your monitor.The lowest gamma level available,1.6,will cause the image to appear brighter.The highest gamma level available,2.4,will cause the image to appear darker.The chart below shows this on ascale.■Color SpaceUse this setting to automatically detect (Auto)or select the color space (RGB or YCrCb)of incoming HDMI video.This should match the color space of the video output settings on your playback device.Markers SubmenuUse the Markers submenu to select various types of markers and settings in 4:3,16:9,or Full Screenmode.■Marker EnableThe Marker Enable setting turns 16:9or 4:3screen markers On or Off.By default,this setting is On.■ Center MarkerUse this setting to display a center marker on the screen.Markers SubmenuCenterMarker■Marker SelectionUse this setting to adjust and view the settings of1of2available markers.■PresetsUse this setting to superimpose one of13markers on the screen or1custom setting.This setting is disabled when the Pixel-to-Pixel mode is enabled.•Off(No Marker)•4:3Aspect Ratio•13:9Aspect Ratio•14:9Aspect Ratio•16:9Aspect Ratio• 1.85:1Aspect Ratio• 2.35:1Aspect Ratio• 2.39:1Aspect Ratio•95%Safe Area•93%Safe Area•90%Safe Area•88%Safe Area•85%Safe Area•80%Safe Area•Custom■ CustomizeUse this setting to customize the screen markers by using the BRIGHT,COLOR,CONTRAST and USER knobs.Thesecontrol the LEFT,RIGHT,TOP and BOTTOM edges,respectively.Each Marker(1or2)can be fully customized in this fashion.■Line WidthUse this setting to choose the width of the marker lines,from1px(thinnest)to10px(widest).■Line ColorUse this setting to select a custom color for the Screen Markers.You can choose between White(default),Yellow,Red, Green and Blue.■TransparencyUse this setting to select the transparency of the marker background.Choose between0%(black),25%,50%,75%and 100%(see through)transparency.Filters SubmenuUse the Filters Submenu to enable various modes.■Check FieldUse the check field modes for monitor calibration or to analyze individual color components of an image.In Monochrome mode,all color is disabled and only a grayscale image is shown.In Blue,Green,and Red check field modes,only the selected color will be shown.Use the following procedure when calibrating the monitor to SMPTE color bars with the following procedure:1.Allow the monitor to warm up for at least5-10minutes.2.Display SMPTE split-field color bars on the monitor using an external source.3.Enable Monochrome mode.4.Locate the pluge pattern(super black,black,and gray bars)at the lower-right corner of the screen.Adjust theBrightness knob until there is no visible difference between the super black and black bars,but the gray bar is stillvisible.5.Adjust the Contrast knob until an even grayscale appears along the top bars.6.Disable Monochrome mode.7.Enable Blue Check Field mode and adjust the Color knob so that the outermost bars(white and blue)appear tomatch in brightness.8.Disable Blue Check Field mode.■False ColorThis monitor has a false color filter to aid in the setting of camera exposure.As the camera Iris is adjusted,elements of theimage will change color based on the luminance or brightness values.This enables proper exposure to be achieved withoutthe use of costly,complicated external equipment.To best utilize this feature,you must understand the color chart below and have a basic understanding of camera exposure.Normally,when shooting subjects like people,it is common practice toset exposure of faces to the equivalent of approximately56IRE.The false color filter will show this area as the color PINK onthe monitor.Therefore,as you increase exposure(open the IRIS),your subject will change color as indicated on the chart: PINK,then GREY,then a few shades of YELLOW.Over exposed subjects(above101IRE)on the monitor will be shown as RED.In addition,underexposed subjects will show as DEEP-BLUE to DARK–BLUE,with clipped-blacks indicated with a FUCHSIA-likestly,the color GREEN is used to indicate elements of the image that are approximately45IRE.This represents a‘neutral’or‘mid-level’exposure commonly used for objects(not people).False Color Key■Peaking(Focus assist)The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture.You can turn the Peaking filter ON and adjust the Threshold and Color by accessing the Adjust e the BRIGHT knob to adjust the Threshold.Adjusting the Threshold to a higher value forces the Peaking algorithm to react quicker to objects that are in e COLOR knob to adjust the Color.Your choice is are Red(default),Yellow,Pink,Green and Blue.■ClipThe Clip function is used to visually filter data on the screen that is under a Lower Threshold or over an Upper Threshold.Data on either side of the filters can be filtered with a custom color.The Lower Threshold numerical value and color can be adjusted using the BRIGHT and COLOR knob,respectively.The Upper Threshold can be adjusted using the CONTRAST and USER knob,respectively.In the image above,the Lower Threshold has been set to20IRE(Red).This means that any part of the image UNDER20IRE will be“colored”in RED.Also,the Upper Threshold has been set to90IRE(Yellow).This means that any part of the image OVER90IRE will be“colored”in YELLOW.■InvertThe Clip function can also be inverted to filter the area between the Upper and Lower Threshold.The color selecteddata.for the Lower Threshold acts as the color for all inverted ClipIn the image above,the Lower Threshold is set to20IRE and the Upper Threshold is set to90IRE.The Clip Invert will filter all data in between20IRE and90IRE and color it RED.■MonochromeEnabling Monochrome in the Clip filter will convert all video to monochrome first,and then apply the Clip filter.This helps visually filtered data stand out from regular color video.■Apply To WaveformEnabling Monochrome in the Clip filter will convert all video to monochrome first,and then apply the Clip filter.This helps visually filtered data stand out from regular color video.21Audio SubmenuUse the Audio Submenu to enable and adjust the various Audio functionsavailable.■VolumeUse this function adjust the volume of the Headphone jack audio signal.■MuteUse this function to Mute(ON)or Unmute(OFF)the audio output from the Headphone jack.■ChannelsUse this function to select which stereo audio pair to route to the headphone jack.HDMI options are stereo pairs1-8.Modular options are stereo pairs1-16.22Signal Analysis SubmenuUse the Video Configuration submenu to select various video settings such as monochrome mode or blue-onlymode.Signal Analysis Submenu■EnableUse this setting to enable the signal analysis instruments selected in the Layout mode.■LayoutSelect which of the signal analysis instruments to display on screen.You can display an Audio Meter(Audio)ora Waveform monitor(VIDEO)or both simultaneously.■PositionSelect the location of the Signal Analysis instruments on the screen.Choose between Bottom-Right,Bottom-Left,Top-Left and Top-Right.■TransparencyAdjust the transparency of the Signal Analysis instruments on the screen.Choose between0%(completelyblocking video in background),25%(Default),50%and75%(show the most amount of video possible).23User Settings SubmenuUse the User Settings submenu to customize User Settings and Function buttons on the monitor’s keypad for easy access to features.frequently used■Save StateUse this setting to save the state of the monitor to1of6available slots.■Load StateUse this setting to load a previously configured monitor state.You can also load the Manufacturer Default state(MFG Settings)■User KnobUse this setting to select the function of the USER knob on the monitor’s rotary encoder section.Choose between Volume (default),Peaking Threshold(used with the Peaking function)and Backlight.■F1,F2,F3,F4Use this setting to select the functions to be activated by the F1-F4buttons on the monitor’s keypad.Choose between the following options:•Aspect Ratio Toggle through Aspect Ratio Settings•Pixel to Pixel Enable/disable Pixel to Pixel•DSLR Preset Toggle through DSLR Preset settings•Color Temperature Toggle through Color Temperature presets•Gamma Toggle through Gamma settings•Color Space Switch between YCbCr and RGB Color Space(HDMI ONLY)•Marker Enable Enable/disable On-Screen Markers•Center Marker Enable/disable the Center Marker•Marker Select Toggle between two different On-Screen Markers•Marker Preset Toggle through On-Screen Markers24•Marker Width Toggle through On-Screen Marker widths•Marker Color Toggle through On-Screen Marker colors•Marker Transparency Toggle through Marker Background Transparency settings•Check Field Toggle through Check Field options•False Color Enable/disable False Color filter•Peaking Filter Enable/disable Peaking filter•Clip Filter Enable/disable the Clip filter•Clip:Invert Enable/disable the Clip Invert feature•Clip:Monochrome Enable/disable the Clip Monochrome feature•Waveform Clip Enable/disable the Clip filter on the Waveform monitor•Audio Mute Enable/disable the Audio Mute feature•Audio Channels Toggle through the available Audio Channels•Signal Analysis Enable/disable the Signal Analysis feature•Analyzer Layout Toggle through Analyzer Layout setup(audio,video or both)•Analyzer Position Toggle through Analyzer on-screen locations•Analyzer Transparency Toggle through Analyzer transparency settings•Input Format OSD Toggle through Input Format OSD on-screen time•Freeze Image Enable/disable the Freeze Image feature•Splash Screen Enable/disable the Splash Screen on monitor startup•Curtain Color Toggle through different Curtain Colors•Menu Time Out Toggle through Menu Time-Out settings•Input Crop Enable/disable the Input Crop featureAll F(unction)buttons also act as Function Hot Keys,which makes it easy to assign functions to the available F(unction)keys. Simply highlight a function in the menu and press the desired“F”key to assign the function to that key,then press again to confirm the setting.If the function is not available for“F”Hot Key assignment,there will be notification on the screen.25System Submenusettings.Use the System Submenu Settings to modify general monitor■Input Format OSDUse this setting to modify the appearance of the Input Format OSD.Choose between OFF,ON(always on),or5Seconds.■Freeze ImageUse this function to Freeze the incoming image display.■BacklightUse this function to adjust the Backlight strength of the panel.Values range from0(lowest Backlight setting)to100(highest Backlight setting).Values increment by2.*Raising the backlight value will increase the amount of current used by the monitor,which will reduce battery time.■Splash ScreenUse this setting to save the enable(ON)or disable(OFF)the“Marshall Electronics,Inc.”splash screen on monitor power up.■Curtain ColorUse this setting to select between different Curtain Color settings for the monitor.Choose between Blue,Black or Green.26■Menu Time-OutUse this setting to set the Menu Time-Out length.Select between10-30seconds(5second increments)or Off to disable automatic Menu Time-Out.■VersionUse this function to view the current Firmware versions of all monitor components.27Specifications■PANELScreen Size 5.6”DiagonalDisplay Area(h x v)120.96x75.60mmPixels1280x RGB x800Viewing Angle(h x v)170°x170°Brightness300cd/m2Contrast Ratio500:1■VIDEO INPUT/OUTPUTHDMI Input/Output■CONNECTORSHDMI Video Input1x HDMI Female ReceptacleHDMI Video Output(Active Loop-Through)1x HDMI Female ReceptacleStereo Headphone Jack1/8”(3.5mm)Female JackPower InputDC Connector5.46x2.6mm(Outer Diameter x Inner Diameter)Optional Module Slot ■ELECTRICALPower Consumption 1.0A@12VDC(11W)Voltage Requirement12VDC■MECHANICALWeight(with rack ears):1lbsOperating Temperature32°F to104°F(0°C to40°C)Storage Temperature-4°F to120°F(-20°C to50°C)See Dimensions for exact specifications..2829DimensionsMaintenance■Screen CleaningPeriodically clean the screen surface using ammonia-free cleaning wipes(Marshall Part No.V-HWP-K).A clean micro-fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents.Do not use paper towels.Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the surface.Antistatic and fingerprint resistant cleaning agents are recommended.Do not apply excessive pressure to the screen to avoid damaging the LCD.■Faceplate DustingDust the unit with a soft,damp cloth or chamois.Dry or abrasive cloths may cause electrostatic charge on the surface,attracting dust particles.Neutralize static electricity effects by using the recommended cleaning and polishing practice.WarrantyMarshall Electronics warranties to the first consumer that this V-LCD56MD LCD monitor will,under normal use,be free from defects in workmanship and materials,when received in its original container,for a period of one year from the purchase date. This warranty is extended to the first consumer only,and proof of purchase is necessary to honor the warranty.If there is no proof of purchase provided with a warranty claim,Marshall Electronics reserves the right not to honor the warranty set forth above.Therefore,labor and parts may be charged to the consumer.This warranty does not apply to the product exterior or cosmetics.Misuse,abnormal handling,alterations or modifications in design or construction void this warranty.It is considered normal for a minimal amount of pixels,not to exceed three,to fail on the periphery of the display active viewing area.Marshall Electronics reserves the option to refuse service for display pixel failure if deemed unobtrusive to effective use of the monitor by our technicians.No sales personnel of the seller or any other person is authorized to make any warranties other than those described above,or to extend the duration of any warranties on behalf of Marshall Electronics,beyond the time period described above.Due to constant effort to improve products and product features,specifications may change without notice.30This page intentionally left blank31Marshall Electronics,Inc.1910East Maple Ave.El Segundo,CA90245Tel:(800)800-6608/(310)333-0606•Fax:310-333-0688•******************32。
枪机高清低照度宽动态摄像机与球机说明书
高清低照度宽动态摄像机利用说明书技术参数：1/3 Sony Super HAD CCD●彩色：550TV Lines, 黑白：600 TV Lines●内置新一代3D滤光片●最大258倍感光，最低照度●利用像素控制数字宽动态●32倍变焦●最多可设置8个隐私区参数：芯片: 1/3 Sony Super HAD CCD像素: NTSC:811(H)*508(V) PAL: 795(H)*595(V)有效像素:NTSC:768(H)*494(V) PAL: 752(H)*582(V)扫描制式: 2:1隔行扫描同步方式: 内同步OSD 菜单: 可选动态: 52dB(*258X) 背光补偿: BLC/HSBLC/Off Selectable清楚度: 570TV Lines(彩色) 600TV Lines(黑白) 信噪比: 52dB(AGC off,Weight on)最低照度: (Sens-up *258) 白平衡: A TW/AWB/Indoor/Outdoor/Manual/AWC电子快门: 1/60sec-120,000sec 感光: Auto/Fixed/Off(可选范围*2-*258)自动增益: 高/中/低/可选 3 DNR: Off/On(1-50水平调节)D-WDR: 室内/室外/关闭移动侦测: On/Off(4个区域，报警输出)隐私保护: On/Off(8个区域)镜像功能: Off/Mirror/V-Rev/Rotate 冻结画面: On/Off锐度: 0-30（品级调节）D&N选择: Color/Auto/Ext/BW数码变焦: 开启(*32)/关闭噪点: 256点（最低128点ODD 128点）电源: 12V 电流: 120mA工作温度/湿度：-10~+50 摄氏度湿度最大95% 贮存温度/湿度：-20~+50 摄氏度湿度最大95%OSD菜单操作与设置1.按键说明：针孔宽动态摄像机为一个五向按键，按键顺序是中间按下为进入菜单或确认，往上拨动一次菜单指示三角符号向上移一项，往下拨动一次菜单指示三角符号向下移一项，往左右拨动改变参数或选择子菜单；菜单中带此符号选项表示些菜单中还有子菜单。
摄像机操作指导书
摄像机操作指导书1. 简介本指导书旨在向用户提供如何操作摄像机的详细步骤和注意事项。
请按照以下步骤进行摄像机操作。
2. 操作步骤2.1 打开摄像机1. 摄像机通常配备电源开关，将其拨到打开位置。
2. 摄像机将开始自检过程，并显示操作界面。
2.2 设置摄像模式1. 操作界面通常提供摄像模式选项。
根据需要选择所需的模式：照相模式或录像模式。
2. 注意：若选择照相模式，请确认摄像机上已安装存储卡。
2.3 调整焦距1. 使用摄像机上的焦距调节环，根据拍摄需求调整镜头焦距。
2. 注意：在调整焦距时，请确保手持摄像机稳定，避免晃动。
2.4 对焦1. 将摄像机对准拍摄对象。
2. 按下快门按钮（或对焦按钮）使摄像机自动对焦。
3. 如果需要手动对焦，请参考摄像机说明书中的相关指导。
2.5 拍摄图像/录制视频1. 当摄像机准备就绪时，按下快门按钮拍摄图像（或开始录制视频）。
2. 摄像机通常会发出声音或提供屏幕提示来确认操作已执行。
2.6 预览和回放1. 使用摄像机的预览功能，您可以查看刚拍摄的照片或录制的视频。
2. 确保摄像机处于预览模式下，并使用指定的按钮（通常是回放按钮）进行查看。
2.7 关闭摄像机1. 当您完成拍摄或使用摄像机时，请将电源开关拨到关闭位置。
2. 确保摄像机已关闭，然后将其放置在安全的位置。
3. 注意事项- 在操控摄像机时，请小心不要将手指放置在镜头或闪光灯上，以免损坏设备或影响拍摄效果。
- 定期清洁摄像机镜头和机身，以确保拍摄的照片或视频清晰。
- 如果遇到摄像机操作或故障问题，请参考摄像机的使用手册或联系专业售后人员。
以上是摄像机操作的简要指导，希望能帮助您顺利使用摄像机进行拍摄。
如有任何问题，请联系我们的客服人员。
谢谢！。
网络摄像机用户使用手册说明书
无线网络摄像机用户使用手册｛本类型的摄像头操作功能基本一致，功能或多或少而已. 以下是针对720P摄像头说明书｝本手册可能在某些技术细节方面描述不够准确或存在印刷错误，假如您在使用过程中按照使用手册无法解决问题时，请联系我公司技术部垂询相关操作方法。
我们将根据产品功能的增强而更新本手册的内容，并将定期改进或更新本手册中描述的产品或程序。
更新的内容将会在本手册的新版本中加入，恕不另行通知。
1、安装环境✋ 远离高温的热源和环境；避免阳光直接照射；✋ 注意防水, 有水接触到设备时, 立即断电.✋ 避免在过于潮湿的环境使用, 请在参考的适用湿度范围（85%RH以下）内使用。
✋ 避免在过热或过冷环境使用, 请在参考的适用温度范围（-10℃~ +50 ℃）内使用。
✋ 本机应水平安装或壁挂安装，避免安装在会剧烈震动的场所，勿将其它设备放于本机上。
2、运输与搬运✋ 本机的包装经过抗震设计和实验，确保在运输过程中摄像机不会受到意外损坏，所以在搬运本机时，最好使用原来的包装材料和纸箱；✋ 避免在过冷、过热的场所间相互搬动摄像机，以免机器内部产生结露，影响机器的使用寿命；✋ 严禁带电搬动本机，否则会损坏主板；注意：1. 在让摄像机运行之前，请检查供电电源是否正确。
2. 请勿将此产品摔落地下或受强烈敲击。
3. 请勿直接碰触到图像传感器光学元件，若有必要清洁，请将干净布用酒精稍微湿润，轻轻拭去尘污；当摄像机不使用时，请将防尘盖加上，以保护图像传感器。
4. 避免对准强光（如灯光照明、太阳光等处）聚焦，否则容易引起过亮或拉光现象（这并非摄像机故障），也将影响图像传感其寿命。
5. 激光束可能烧毁图像传感器，在激光装置被使用的情况下，请您一定注意不要让图像传感器的表面暴露于激光束之下。
6. 如果设备工作不正常，请联系购买设备的商店或联系服务中心，不要以任何方式拆卸或修改设备（未经许可的修改或维修所导致的问题，责任自负）。
目录产品介绍---------------------------------------------------------------------------------------------------------21.1(功能概述)---------------------------------------------------------------------------------------------31.2(产品包装)-----------------------------------------------------------------------------------------------31、设备安装------------------------------------------------------------------------------------------------------42、软件下载-------------------------------------------------------------------------------------------------43、PC电脑客户端观看--------------------------------------------------------------------------------------53.1内网观看--------------------------------------------------------------------------------------------53.10 外网观看-------------------------------------------------------------------------------------------84、电脑客户端功能使用介绍·--------------------------------------------------------------------------104.1设置-----------------------------------------------------------------------------------------------104.3 TF卡录像--------------------------------------------------------------------------------- ----114.4 WIFI设置--------------------------------------------------------------------------------------124.5 修改密码---------------------------------------------------------------------------------------124.9 录像计划---------------------------------------------------------------------------------------144.10 录像查看---------------------------------------------------------------------------------------144.12 报警设置---------------------------------------------------------------------------------------155、搜索工具使用--------------------------------------------------------------------------------------------176、手机观看--------------------------------------------------------------------------------------------------21 1.功能概述该型号网络摄像机我公司开发的即插即用网络摄像机产品，采用H.264编码格式，该系列设备接入互联网，不需要进行复杂设置，即可在接入互联网的电脑或者手机上，通过我公司发布的专用软件访问摄像机的音视频。
沈阳华讯电子技术有限责任公司-监控器说明书【2013最终完成正确版本-同印刷版】
沈阳华讯电子技术有限责任公司
公司地址：沈阳市沈河区沈州路 99 号太和大厦 B 座 13 层 邮 编：110014 服务热线： （公网）024-6216852 （专网）031-57345 传 真：024-62168560
24 小时技术支持：400-709-7799
一、系统简介 ..........................................................................................................................................1 二、设备安装 ..........................................................................................................................................6 2.1 安装准备 .......................................................................................................................................6 2.1.1 工具准备 .................................................................................................................................6 2.1.2 辅材准备 ..........................................................
萤石 摄像机 筒机-C5系列 CS-C5X-6B51FR 使用说明书
装箱清单用户指南保修卡合格证摄像机防水配件爆闪灯红外灯指示灯麦克风网络接口电源接口外观介绍指示灯红色常亮：启动中红色慢闪：网络断开蓝色慢闪：正常工作蓝色常亮：客户端正在访问摄像机红色快闪：故障**RESET键Micro SD卡槽扬声器RESET键长按5秒设备重启**连接线路网络接口虚线配件需自备。
如果您购买的是PoE版摄像机，需自备PoE交换机为摄像机供电，连接线路，如下图所示。
连接路由器虚线配件需自备。
电源接口如果您购买的是非PoE版摄像机，请连接摄像机的电源和网络，如下图所示。
下载“萤石云视频”客户端将手机连上您的Wi-Fi网络，扫描下方的二维码，下载并安装后根据提示完成用户注册。
手机扫描二维码下载“萤石云视频”客户端添加到“萤石云视频”登录“萤石云视频”客户端，选择添加设备，根据界面提示将摄像机添加到“萤石云视频”。
安装设备1安装支架选择干净、平整的墙面，对准支架上的孔钻孔，推入螺丝（请在支架配件中寻找）后固定。
安装支架设备支持吊顶安装、墙面安装等安装方式，需要配合支架。
此处仅以墙壁安装为例，其它支架和安装方式类似；安装墙面应具备一定的厚度并且至少能承受3倍于设备的重量。
2安装设备用螺丝将设备（壁装螺母）固定在支架上，然后根据实时浏览画面调整好角度即可。
如果您选择的安装地点比较潮湿或者容易被雨水溅到，请务必使用防水保护套，防止线路遇水短路。
3安装保护套（可选）拿出配件中的保护套，按照以下步骤完成安装。
齐根剪断网线A端的水晶头2用网线A端穿过防水保护套4路由器将网线A端插入设备的网络接口并拧好防水保护套 6AB AB 将后防水胶圈套在设备的网络接口上1将网线A端重新做好水晶头网线B端插入路由器的LAN口 57将紧固胶圈套入保护套内并拧好后盖3BFAQQ: A: Q: A:视频加密密码是什么？视频加密密码默认为摄像机的验证码，即摄像机标签上六位大写的字母。
如何存储录像？摄像机支持两种存储方式：1、Micro SD卡（需购买）：默认是活动侦测录像模式，可设置成全天录像模式（初次使用前请登录“萤石云视频”客户端初始化）；2、云存储（需购买） ：默认是活动侦测录像模式。
摄像机镜头连接说明说明书
1. Please check whether lens mount type is C mount or CS mount.2. CS mount type: Mount the lens after removing the rubber cap. C mount type: attach the C mount ring and mount the lens.3. Go to the camera setup and set the LENS mode as ESC.1. Mount the lens as described in the manual lens connection.2. Connect the auto IRIS lens connector to the connector on IRIS port on the the rear panel.3. Go to the camera setup and set the LENS mode as DC IRISSDIIRIS【1】2】【4】【5】【6】【3】【1】OSD Control 【2】【3】SDI Out 【4】POWER LED 【5】HDMI 【6】MAIN I/OIRIS Port C mount ringCS mountC mount ringIRIS Port5660CS mount【HDMIPOWERI/OMAIN I/O 12VDCAUDIO RS-485OSD ControlSPECIFICATIONSImage Sensor 1/3” Progressive CMOS (Approx. 2.1 mega)Scanning System 16:9 Progressive Sync. System InternalEffective Pixel 1920(H) x 1080(V)Min. Illumination 0.2Lux (Day), 0.1Lux (Night), 0.005Lux (DSS on)Horizontal Resolution 1,000TVLOpticsLensC/CS Mount, DC-IRIS WDR/BLCHLC (High Light compensation)Exposure Auto / ManualAuto (3,000°K~8,000°K)ATW (1,900°K~11,000°K)ManualDay & Night SystemAGC / TDN (ICR)NTSC: 1/30~1/30000PAL: 1/25~1/30000DSS ( ~X64)Privacy Mask, Image Mirror, 3DNR, Flickerless Sharpness, Defog, DIS (Digital Image Stabilizer)Motion Detection, DSS (Digital Shutter Speed)SMPTE 292M (1.485Gbps) 1080p@25/30 or 29.97 1080i@50/60 or 59.94 720p@50/60 or 59.94 720p@25/30SMPTE 424M (2.97Gbps) 1080p@50/60 or 59.94800mVp-p, 75Ω, Unbalanced Generator (Single-Ended)HDMI 1.3 compliant (Embedded Audio) 1920x1080p@50/60 or 59.94 1920x1080i@50/60 or 59.94 1920x1080p@25/30 or 29.97 1280x720p@50/60 or 59.94 1280x720p@25/30Mic Level (1Vrms). 2.5V Mic biasBit Depth: 16,20,24,32Bits. 48KHz sample rates Gain : -12dB ~ 59.5dBPELCO-P/D, SONY-VISCA Protocol8Bits Data, 1Stop Bit, No Parity, 2400~115200bps Operation Temperature -10℃ ~ 50℃Power Input12VDC (7VDC to 15VDC)Power consumptionMax 6WDimensions (W X H X D)60 X 60 X 56mm / 2.36 X 2.36 X 2.20Inches Net WeightApprox. 160g/0.35Lbs (Without Lens)Video OutputSDI (BNC)Control RS-485General HDMI (HDMI Type A)MIC InputCV345SensorFunctions Back Light Compensation White BalanceElectronic ShutterFunctions60WARNING!Do not use the camera if fumes, smoke or a strange odor is emitted from the unit, or if it seems to not function correctly. Disconnect the power source immediately and consult your supplier.CA UTION✋Always follow the instructions in the installation guide when applying power. Fire and equipment damage can occur if power is applied incorrectly. For the correct power supply, refer to the CA UTION✋Do not install or operate in small, unventilated areas. Heat build upCA UTION✋To prevent damage, do not drop the camera or s ubject it to strong CA UTION✋If installed close to a TV, radio transmitter, magnet, electric motor interfere with or distortthe image.CA UTION✋Whether or not the camera is used outdoors, never point it toward the sun. Use caution when operating the camera in the vicinity of spotCA UTION✋Do not use the camera in extreme environments where high temperatures or high humidity exists. Use the camera underconditions where temperatures are between 14°F ~ 122°F (-10°C ~ 50°C), and humidity is below 90%.shock or vibration.CV345-CSB/CS Quick Start GuideRear Panel Video/Power ConnectionManual Iris Lens ConnectionAuto Iris Lens ConnectionSpecificationsDimensionsFeatures· 2.5 Megapixel 1/3-inch CMOS Sensor· CS/C Mount with DC-Auto Iris (lens sold separately)· CV345-CSB: 1920x1080p59.94/29.97, 1920x1080i59.94, 1280x720p59.94/29.97fps· CV345-CS: 1920x1080p60/50/30/25, 1920x1080i60/50, 1280x720p60/50/30/25fps· Lemo-style (I/O) connector contains: RS-485(+/-), 12V power connector & TRS microphone input with 2.5V power supplied · 3G/HD-SDI (BNC) & HDMI (full size-v1.3) built into rear panel· Audio Mic 3.5mm TRS Stereo input embedding w/ 2.5V power supplied · OSD Menu Joystick, RS-485 (Pelco/Visca)· 12VDCFull-HD (3G/HD-SDI) 2.5MP Compact Broadcast Camera with AUDIO + HDMI (CS/C mount w/ Auto-Iris)HD-SDI 1080p Camera Setup: CV345-CS, CV345-CSBSETUP SUB MENUSUB MENUDESCRIPTIONESC IRIS is fixed. Shu er controls exposure automa cally if shu er is set as auto. DC IRIS Controls exposure automa cally.AUTOColor temperature is automa cally adjusted to 3,000°K ~ 8,000°KATWCon nuously adjusts camera color balance in accordance with any change in color temperature. Compensates for color temperature changes within the range of 1,900K to 11,000K.PUSH Color temperature will be manually adjusted by pushing the OSD bu on. Place the white paper in front of the camera when OSD bu on is pressed to obtain the op mum result.COLOR TEMPERATURESelect color temperature from LOW, MIDDLE, or HIGH.RED GAIN Adjust the Red tone level manually. Adjust the red tone of the image (0~20).BLUE GAINAdjust the Blue tone level manually. Adjust the Blue tone of the image (0~20).BRIGHTNESS 0~20Adjust the screen brightness. The bright control func on adjusts gain and iris, to keep a brightness level.AGC LIMIT0~20A func on which controls the ampli fica on/gain process automa cally if the illumina on falls under the usable level. Camera raises up gain to selected gain limit when dark condi ons.AUTO Shu er controls exposure automa cally when IRIS is manual. Shu er control has the exposure control priority MANUAL Shu er speed is fixed. The exposure control priority is given to other resources.FLICKERLESS Use this func on when you experience picture flicker, this happens when there is a con flict with the installed ligh ng frequency.DSS (SENS-UP)OFF, x2~64When luminance condi on is low, DSS can adjust the picture quality by maintaining the light level. Minimum slow shu er limit is down to x64.WDR Enable user to view both object and background more clearly when background is too bright. (LOW, MIDDLE, HIGH). BLC Enable a back light compensa on feature.SPOTEnables a user to select a desired area on a picture and view that area more clearly when background is too bright.ACE LOW, MIDDLE, HIGHBrightness correc on of the dark image area.LEVEL Highlight the bright area with a masking box with a selected color. Adjust the masking level (0~20).COLORSelect the color for masking (GRN, MAG, RED, BLUE, BLK, WHT, YEL, CYN)ANTI-SAT.Adjust the an -satura on level manually. This feature will reduce the satura on phenomenon in which part of the camera receiving the light a ffected by the IR or light in Night mode.AGC LEVEL The camera will stay in DAY in a normal environment, but switched to NIGHT mode when ambient illumina on become this pre-set level. This level is threshold for switching day to night. It is same as the exposure gain level.AGC MARGIN Set the margin between Day →Night switching level and Night →Day switching level.DWELL TIME Select the checking me of light condi on to con firm to chage from the day mode to the night mode. COLOR The camera keeps color mode constantly.NIGHT The camera keeps black/white mode constantly.RANGE10%, 20%, 30%This func on will reduce image blurriness due to vibra ons caused by hand shake or Pan/Tilt opera on.The image will be digitally zoomed in to compensate the shi ed pixels.Set the digital zoom level for image stabilizing. (Max. 30% : x1.4 Digital Zoom)FILTER LOW, MIDDLE, HIGH Select the level of correc on hold filter for the worst case of image. HIGH: Less image correc on. Low: More image correc on.AUTO C OFF, HALF, FULL OFF: Disable the auto centering func on.FULL: The camera will correct the blurness due to vibra ons caused by both hand shake or Pan/Tilt opera on.HALF: The camera will correct the blurness due to vibra ons caused by hand shake. AUDIO LEVEL 0~143Enabled when AUDIO AGC is set OFF. Adjust the audio level manually.AUDIO AGC OFF, ON Automa cally adjusts the MIC gain as the input signal becomes overly loud or very weak.AGC MAX 0~119Enabled when AUDIO AGC is set ON. Set the maximum level of AUDIO AGC.SAMPLE BITS 16, 20, 24, 32 BITSSelect the bit depth of audio.COLOR LEVEL 0~20Adjust the color level value for a fine color tune.SHARPNESS 0~20Adjust the sharpness of the image. As you increase this value, the picture outline becomes stronger and clearer. MIRROR Video output is rotated horizontally.FLIP Video output is rotated ver cally.D-ZOOM1.0X ~ 16.0XEnlarge digitally the video output up to 16X.AUTO This feature will help increase visibility in extreme weather condi ons, such as fog, rain or in a very strong luminous intensity. MANUALSet the level of defoging func on (LOW, MIDDLE, HIGH).DNR OFF, LOW, MIDDLE, HIGHThis feature will reduce the video noise at low ambient light.MOTION This feature will observe the object movement by mo on zone and sensi vity that are pre-set with sub menu.SHADING This feature will correct the inconsistent brightness level in the image.GAMMA This feature will adjust video output brightness (STANDARD, STRAIGHT, LOW, MIDDLE, HIGH).FRAME RATE Change video output format.CAM VERSION Display the firmware version of the camera.CAM TITLE The camera tle can be entered and it will appear over the video output.PRIVACY Mask an area you want to hide on the screen with sub menu. CAM ID 0~255Select the camera ID number for RS-485 communica on.BAUDRATE Set the baudrate of RS-485 communica on (2400, 4800, 9600, 19200, 38400, 57600, 115200).LANGUAGESelect the menu language.RESET Reset the camera se ngs to the factory defaults. EXITExit the setup.DAY/NIGHTAUTOIMAGE STABILIZERIMAGE CONTROLDEFOG DISPLAY CONTROLAUDIOLENSWB CONTROLMANUAL AE CONTROL (EXPOSURE)SHUTTER BACK LIGHTBACK LIGHTECLIPSE。
IC Realtime 产品说明书：ICIP-D565-IR 全尺寸 IR 球形 IP 摄像头
ICIP-D565-IRD1 Indoor/Outdoor, Vandal proof Full-Size IR Dome IP Camera●Built-in high performance IR LEDs(20~30 meters)●Max 32GB Hot-swappable SD card for local storage●Supports Alarm I/O, RS485 interface ● 1 channel analog video output, BNC ●Multi-zone video detection and privacy masking●Dual encoding streams supportedImage flipCapturing unnecessary data such as surrounding hallway walls can increase storage requirements without any added value. The image flip feature allows the camera's image to be rotated in 90° increments for better video optimization.H264Like all IC Realtime series products, this device utilizes H.264E (Enhanced H.264) compression technology, enabling crisp image viewing with the least bandwidth consumption possible. This unit adopts an embedded system design, as well as a Linux Operating System, resulting in high levels of stability, performance, and most importantly: reliability. In addition, this unit is fully operational from remote locations (Search / Playback / Backup / Configuration) over standard Ethernet networks.The ICIP-D565-IR is an IP Dome with IR camera with H.264 image compression with JPEG image capture, 100ft IR Distance. The ICIP-D565IR also comes with a Micro SD card slot for a maximum of 32GB for local storage.System OverviewFunctionsEnvironmentalWith a temperature range of -25 °C to +60 °C (-14 °F to +140 °F), the camera is designed for extreme temperature environments.InteroperabilityThe camera conforms to the ONVIF (Open Network Video Interface Forum) specifications, ensuring interoperability between network video products regardless of manufacturer.Technical SpecificationImage Sensor 1/3" SONY Super HAD CCDEffective Pixels NTSC: 768(H)×494(V)/PAL: 752(H)×582(V)Horizontal Resolution 540TVL(Color), B/W(600TVL)Scanning System ProgressiveElectronic Shutter Speed Auto/Manual, 1/50~1/10000sMinimum Illumination Color: 0.1LUX/F1.2/B/W: 0.1 LUX/F1.2(IR on)S/N Ratio More than 50dB IR Distance 100ft IR On/Off Control Auto/ Manual IR LEDs3Lens Type Fixed Mount Type Board-in Focal Length 2.7mm~12mm Max. Aperture F1.4Angle of View H:110°~40° , V:58°~23°Optical Zoom N/A Focus ControlN/ALensCameraPan/Tilt/Rotation RangePan:0˚~355˚; Tilt:0˚~65˚; Rotation:0˚~355˚Pan/Tilt/RotationIVSN/A Advanced Intelligent FunctionsN/AIntelligenceCompression H.264Streaming Capability 2 StreamsResolutionD1(704×576) / HD1(352×576) / CIF(352×288) / QCIF(176×144) /VGA(640×480) / QVGA(320×240) / QQVGA(160×120)Frame RateMain Stream: D1/HD1/CIF/QCIF/VGA QVGA/QQVGA(1~25fps)Extra Stream: D1/HD1/CIF/QCIF/VGA QVGA/QQVGA(1~25fps)Bit Rate Control CBR/VBR Bit Rate 32K~4Mbps Day/Night YesWhite Balance Auto/Manual Gain Control Auto Noise Reduction 3D DNRMotion Detection Off / On (4 Zone, Rectangle)Region of InterestOff / On (4 Zone)VideoElectronic Image Stabilization (EIS)N/A Smart IR N/A Defog N/A Digital Zoom 16x MirrorOff / OnPrivacy MaskingOff / On (4 Area, Rectangle)CompressionPCM(64Kbps) / G.711a(32Kbps) / AMR(10.2Kbps)AudioEthernet RJ-45 (10/100Base-T)Protocol HTTP, TCP/IP, ICMP, RTSP, RTP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPOE, DDNS, FTP, Alarm Server Interoperability ONVIF, PSIA, CGI Max. User Access 10 Users / 20 Users Edge Storage Micro SD card 32GB Web ViewerIE, Chrome, Firefox, Safari Management Software ICRSS Pro/ICVIEW, SmartICRSS Smart PhoneIOS, AndroidNetworkVideo Interface N/AAudio Interface 1/1 channel In/Out RS485PTZ control Alarm2 Input / 1 OutputInterfacePower Supply DC 12V/PoE (802.3af)Power Consumption420mAElectricalOperating Conditions -14°F ~ 140°F/-25°C ~ 60°C, 10% ~ 90%Storage Conditions-14°F ~ 140°F/-25°C ~ 60°C, 10% ~ 90%EnvironmentalCasing MetalDimensions 5.55"×4.21"/Ф141mm×107mm Weight3.30lb/1.5kgConstructionDimensions (mm/in)。
Canon 5WRRNGOGPVCT[端口设备说明书
5WRRNGOGPVCT[ U[UVGO EQORQPGPVU 6/ 6GTOKPCN /QFWNG-"2"3DH H66H<HKSSF1XGTXKGY -I+HI+"H J6H "C2-3 0H 5 L0" HI+"H3L2 "CH5&H N -0 0"H -)-I 0H -37LIDH 3 H5LI7LIDH 3 HI+"H3L2 "CH5&H 3 05)H-37LIDH 3 H5LI7LIDH O-I+-3H H C-N"H 3H "H"P7 3 " ;&GUKIP+"H&5005O-3)H-3I"C& "DH C"H05 I" H53HI+"H J6H "C2-3 0H 5 L0"#PH -)-I 0H-37LID(PH - -C" I-53 0H -)-I 0H-37LIDG -)-I 0H5LI7LID K PHC"0 QH5LI7LIDHO-I+H + 3)"5N"CH 53I I K PH 3 05)H-37LID K PH 3 05)H5LI7LID6PHI"27"C ILC"HD"3D5CH-37LIH8 #(,6JSH5CH 9 K PH , - HD5 /"ID6PH 533" I-53H&5CHI+"H"0" IC53- DH75O"CHDL770QHN- HI+"H K( H75O"CHDL770QH 533" I5C6PH H87C5I" I-N"H)C5L3 9H 533" I-53;+"H J6H "C2-3 0H 5 L0"H 3H "HD3 77" H53I5H HJ' 6'GE;' HC -0H-3H 5C 3 "HO-I+H 'SSKK;+"HD-)3 0H 0"HD+-"0 H 3H "H 533" I" HI5HI+"H J6H "C2-3 0H 5 L0"HN- H HD+-"0 H 533" I-53HI"C2-3 0 H";);H +5"3-PH 53I IH IQ7"H #H5CH "- 2M00"CHIQ7"H 6;H +"HD+-"0 H 533" I-53H I"C2-3 0H2LDIH35IH "HLD" H&5CHDIC -3HC"0-"&;+"HDI ILDH5&HI+"H J6H "C2-3 0H 5 L0"H-DH-3 - I" HN- H H2L0I-, 505CH ;5GNGEVKQP CPF QTFGTKPI FCVC6GEJPKECN FCVC"D C-7I-53C "CH 5;6/ 6GTOKPCN /QFWNG 8O-I+5LIH , - H 0"95. ## ##6/ 6GTOKPCN /QFWNGP;H LCC"3IHC">L-C"2"3IH8 IHK( 9HO-I+5LIHI /-3)H 5L3IH 5&H -)-I 0H5LI7LIDS;' P;H 533" I 0"H C5DD,D" I-53K;'22K P;H&LD"H7C5I" I-53KS -)-I 0H-37LID 50I )",J HI5H=JS 5OH0"N"08 3H57"3H -)-I 0H-37LIH-DH -3I"C7C"I" H DH?05O?9,J HI5H='-)+H0"N"06' HI5HJS LCC"3IH 53DL27I-538 IHK( 9IQ7;6S 2-)3 0H7C57 ) I-53H "0 QD &5CH -)-I 0H-37LIDH 77C5P;'S D H 77C5P;6SS D P;H 533" I 0"H C5DD,D" I-536;'22K -)-I 0H5LI7LIDH8 53I-3L5LD0QHD+5CI, -C L-I,7C55&950I )"K( P;H05 H LCC"3IH7"CH -)-I 0H 5LI7LI6SS 2 P;HI5I 0H LCC"3IH5&H -)-I 0H 5LI7LID(SS 2 P;H 533" I 0"H C5DD,D" I-536;'22K3 05)H-37LIDH8 HDO-I +H-DHLD" HI5HI5))0"H "IO""3HN50I )"H 3 H LCC"3IH -37LI9DHN50I )"H-37LI , 50I )"HC 3)",6S HI5H=6S , 3I"C3 0HC"D-DI 3 "H -6SS /DH LCC"3IH-37LI , LCC"3IHC 3)"(2 HI5HKS 2 G,KS 2 HI5H =KS 2 GS 2 HI5HKS 2 , 3I"C3 0HC"D-DI 3 "H -K'S , "D50LI-5366 -IH=HD-)3 P;H 533" I 0"H C5DD,D" I-536;'22K 3 05)H5LI7LIDH8 53I-3L5LD0QHD+5CI, -C L-I,7C55&950I )"HC 3)",6S HI5H=6S P;H05 H LCC"3I ,J 2 HI5H=J 2LCC"3IHC 3)"(2 HI5HKS 2 H,KS 2 HI5H =KS 2 HS 2 HI5HKS 2 P;H05 HC"D-DI 3 "'SS H&5CH5LI7LIDH-3HI+"HC 3)"H ,KS 2 H -DH=KS 2 "D50LI-5366 -IH=HD-)3 P;H 533" I 0"H C5DD,D" I-536;'22K "0 QH5LI7LIDH8 + 3)"5N"CH 53I ID9 P;H05 H LCC"3I #P;HDO-I +-3)HN50I )"K'S HJS P;HDO-I +-3)H75O"CH 8 IHK'S H9KSSS H8 5D 7+-H%H69E'S H8 5D 7+-H%HS;(9 P;HDO-I +-3)H75O"CH 8 IHJS H9K(S H85+2- H05 9 ">L-C" H2-3-2L2H LCC"3I 6SS 2 P;H 533" I 0"H C5DD,D" I-53K;'22K 5O"CH05DD 16SH 533" I-53 3H+5LD-3)HO-I+H (HD C"O - I+'S 22H "-)+I 6'S 22H "7I+66622H "-)+I H 77C5P;S;#E /)5WRRNGOGPVCT[ U[UVGO EQORQPGPVU6/ 6GTOKPCN /QFWNG-"2"3DH H66H<HKSSF+PVGITCVKQP+"H J6H "C2-3 0H 5 L0"H 522L3- I"DHO-I+HI+"H JKSH 53IC50H 3-IHN- H , - ;533" I-53H - )C 2H&5CHI+"H J6H "C2-3 0H 5 L0"@+ @@9+49@069 6069 6 069 6 069 6 069 6 069 6 069 6 069 69+ 43@9+4@+.6@0 9+ 6@" 6+" 6+0 +@49+3 +@6@ 0 9+ 6@" 6+ 0 6@ 0 6+"4 6+ 09930 ',+ ',9+ 6@6+49069 690 00 +5 +9 45 6) 5 6++5 6+@9..6@6 6+6 696 6+6 6 6 6 6 636 646 696+.=7/9 6" # * % 76@" # * % 76+6+.66 ! 6$ ', 1 6' 7 6#( 17 666666#(67!# 6 #1 #76 = ',& /9.66 ( 6, 1 ' 7 1#? 6#( #<# &&> 6 11 (7 * 1 /.66 ( 6, 1 ' 7 1#? 6#( #<# &&> 6* 7, 7/; 9+9; ;@@@9)。
海康威视网络摄像机操作手册 V5.0.3
警告事项提醒用户防范 潜在的死亡或严重 伤害危险。
注意事项提醒用户防范 潜在的伤害或财产 损失危险。
警告： 请使用满足 SELV（安全特低电压）要求的电源，并按照 IEC60950_1 符合 Limited Power Source(受限电源)的额定电压为 5V/12V 直流或 24V 交流电源供电（供电电源的要求详见说明书） 。 如果设备工作不正常，请联系经销商或最近的服务中心，不要以任何方式拆卸或修改设备（未经许可的修改或维修所导 致的问题，责任自负） 。 为减少火灾或电击危险，请勿让本产品受到雨淋或受潮。 本安装应该配线中组入易于使用的断电设备。 有关在天花板上安装设备的指示：安装后，请确保该连接至少可承受向下 50 牛顿（N）的拉力。
注意： 在让摄像机运行之前，请检查供电电源是否正确。 请勿将此产品摔落地下或受强烈敲击。 请勿直接触碰到图像传感器光学元件， 若有必要清洁， 请将干净布用酒精稍微湿润， 轻轻拭去尘污； 当摄像机不使用时， 请将防尘盖加上，以保护图像传感器。 请勿直接触碰整机散热部件，以免烫伤。 避免对准强光（如灯光照明、太阳光等处）聚焦，否则容易引起过亮或拉光现象（这并非摄像机故障） ，也将影响图像 传感器寿命。 激光束可能烧毁图像传感器，在激光装置被使用的情况下，请您一定注意不要让图像传感器的表面暴露于激光束之下。 避免置于潮湿，多尘，极热，极冷等场所。 请确保安装位置与周边电磁敏感设备保持足够距离，以避免可能产生的电磁干扰。 避免热量积蓄，保持摄像机周边通风顺畅。 使用时不可让水及任何液体流入摄像机。 当运送摄像机时，建议以出厂包装进行保护运送。 电池更换不当会导致配件或产品使用异常，不建议用户直接更换；如需更换，请使用厂家推荐的电池。
网络摄像机
HIC56_HIC54系列-枪型网络摄像机 快速入门
枪型网络摄像机快速入门资料版本：V2.03BOM：3101C02X负责安装和日常维护本设备的人员必须具备安全操作基本技能。
在操作本设备前，请务必认真阅读和执行产品手册规定的安全规范。
安装使用注意事项当光模块工作时，请不要直视光模块和光纤接头（适用于激光接口设备）。
为避免火灾及电击危险，使用时请勿让水或其它液体流入设备。
移动设备之前请断开电源，移动时应小心防止触电，一旦电源线插入电源，设备即会通电。
实际安装时需要使用到一些支架，比如壁装支架、吊装支架等，安装时尽量远离振动源；若您需要提高防护等级，则可将摄像机安装在护罩中。
请您参考本公司的配件推荐表来选择合适的支架和护罩。
若在高空、空旷、风力较大地方安装枪机及护罩，建议在立柱上焊接安装平台（不推荐使用壁装支架转接），并配合大万向节使用，以提高整体安装刚度，避免枪机因风吹产生振动，导致图像抖动。
使用符合要求的电源适配器或PoE供电设备，使用不符合要求的电源适配器有可能造成摄像机受损。
若电源适配器与设备之间的电源线过长，会导致到达设备的电压偏低，容易造成设备工作异常。
若您需要对电源线加长，请参见“电源线要求”。
现场安装过程中，要求尾线（电源线、网口线）不能过度弯折，避免长时间应力作用导致线缆接触不良，影响设备使用。
请确认在断电状态下连接电源适配器和摄像机，严禁将适配器先上电再连接摄像机，严禁在适配器上电时拔下设备侧电源线。
连接告警输入接口时，请保证告警输入的高电平信号不超过5V DC。
对外连接端口，请用既有的电缆端子进行连接，连接时，请确认电缆端子（锁扣/卡扣）良好，并紧固到位；安装过程中电缆拉扯不要过度，保持有一定余量，防止因为振动、晃动导致端口接触不良或松脱。
日常维护注意事项镜头、护罩前脸无污斑，轻度沾灰时，请使用无油软刷轻轻弹落或吹风皮球吹落。
镜头沾染油脂时，将油污用无油棉布轻轻拭去，再用无油棉布或镜头清洁纸蘸上少量镜头清洁液，自镜头中心轻轻向外旋转擦拭。
摄像机功能设置使用手册
摄像机功能设置使用手册深圳市新沃川科技有限公司2014-06 V1.0目录概论 (3)如何进入WEB配置管理页面设置摄像机 (3)方法一：从PC电脑客户端进入 (3)方法二：直接从IE浏览器进入 (4)方法三：从移动（手机、平板）客户端进入 (5)摄像机功能设置 (5)概览 (5)网络设置 (6)WIFI设置 (6)修改WIFI热点名称（SSID）和密码 (7)设置摄像机和路由器WIFI 无线连接 (7)系统设置 (8)语言设置 (8)管理员设置 (8)修改配置管理页面管理员（登陆）账号和密码 (8)摄像头设置 (9)修改摄像机的名称和密码 (9)设置摄像机画质分辨率 (9)设置摄像机安装位置 (10)报警设置 (10)配置页面设置 (10)手机客户端设置 (11)录像设置 (11)如何用PC电脑在线查看机身SD卡保存的报警图片和视频 (12)恢复摄像机出厂设置 (13)插拔机身存储卡 (13)概论如果要在线查看摄像机SD卡保存的照片、视频，或对摄像机的语言、系统、WiFi、密码、移动侦测等等功能进行设置，必须在局域网内登录摄像机WEB配置管理页面，进行相关操作。
如何进入WEB配置管理页面设置摄像机方法一：从PC电脑客户端进入在“本地”局域网模式下，单击摄像机列表里的目标摄像机，鼠标右键，出现供选择菜单，选择“摄像机配置”。
弹出对话框，输入用户名和密码（初始用户名和密码默认是“admin”，可以修改）并确定,进入管理配置页面。
输入用户名:admin输入密码：admin方法二：直接从IE浏览器进入打开新的IE浏览器窗口，在地址栏输入192.168.176.1，然后再按回车键。
弹出以下对话框，输入用户名和密码（初始用户名和密码默认是“admin”，可以修改）并确定,进入管理配置页面。
输入用户名：admin输入密码：admin重要提示：（1）电脑也可以直接和摄像机AP热点连接进行相关设置。
（2）摄像机默认热点名称（SSID号）是“EShenshu_XXXXXX”，默认密码是“1234567890”（3）在地址栏输入192.168.176.1方法三：从移动（手机、平板）客户端进入通过“局域网设备”，可以进入WEB页面管理，设置摄像机。
监控使用说明书
通过前面板【录像】键直接进入手动录像操作界面。
手动录像
通道；113 4 5 61B4 101L12 13 14
戟蛊：档密淫盘1J1密魯点曲曲密罚自虫檜曲
启/ 特：EJ/ / / / 1/ / / / / I/ / / / /V
全部启动全』:Jr
通道状态
总表示处于空闲 绿色灯表示正在录像 红色灯表示正在网传 橙色灯表示既在录像又在网传。
___熬蚤土_砂
垠繭护軒呵？〒不乖
V阳命搭率：800X600/75J1K
日期：200-1 -Or-21
时御；10沼7:抒
确认 飙消
操作密码允许使用数字键、大写英文字母、小写英文字母，且区分大小写英文字母， 口令长度为8位。
操作密码与用户名具有对应关系，设备默认的用户名为“admin”（管理员），默认的操
2003-12-Q907： 33; 46
2A0J-12-O907: 10: 58
2C03-12-0906:48: 10
2003-12-0906; 25; 22
2004-12-0906: 02:U2仙4-12-09 Q5：39：46
视频剪辑：在回放录像资料的过程中，通过【编辑】键启动和停止视频片段的剪辑，剪辑的 画面保存在USB存储设备中。
回放方式
时间检索，文件播放：输入起止时间，使时间检索有效（使之处于“”状态，默认）
选择“搜索文件”，按【确认】键，列出文件列表（最多列出200个文件，通过“选择页号” 进行翻页），选择要回放的文件，【确认】开始播放。
返迸：通逍.]丸炼类型：金邯
走土：20Q3-12-0900:00:00今2003-12-Q923:59:59lZ
关机
通过菜单
天地伟业卫士系列网络摄像机硬件用户手册
天地伟业卫士系列网络摄像机用户手册V1.0重要声明一、感谢您选用由天津天地伟业数码科技有限公司出品的卫士系列网络摄像机产品。
使用本产品之前，请认真阅读本使用手册。
在您开始使用此产品时，天地伟业数码科技有限公司将认为您已经阅读过本产品使用手册。
二、本手册所涵盖的内容均参考此使用手册编写时最新的消息，当涉及的内容发生改变时，恕不另行通知。
侵犯版权警告一、卫士系列网络摄像机产品的使用方式不得触犯或侵害国际与国内之法律和法规。
一旦因使用不当而发生触犯或侵犯国际和国家法律及法规的行为，天地伟业数码科技有限公司将不为此负担任何民事和刑事责任。
二、请注意，即使摄录的视频仅供个人使用，在某些情况下使用该摄像机复制表演、展览或商业资产的图像，仍有可能侵犯版权或其他法律权益。
警告事项本品仅限室内（温度-20℃-60℃、湿度10%-90%）使用，电源适配器只限工作于AC 90V-264V 50/60HZ交流电源下。
如在此范围之外工作，有可能引起设备工作不正常甚至损坏设备。
本产品不适合于在强磁环境下使用，如使用需采用可靠的第三方防磁设备保护。
请使用随机附件中的电源适配器，选用其他电源可能带来故障。
请勿将摄像头正对阳光或者强烈光线，有可能导致图像失真或者损坏图像传感器。
请将此器材存放于儿童及婴儿触及不到的地方，若遇意外损坏，可能导致身体损伤，如：破损的外壳可能导致皮肤划伤，SD卡可能导致意外吞食。
请勿试图拆开或改装本指南没有说明的任何部分，请勿让器材触及、浸入水或液体。
如果外壳接触到液体或盐分空气，请用吸水软布擦干外壳。
请勿使用酒精、汽油、稀释剂、或其他易燃物质清洁或护理本器材。
请勿切割、损坏、改装电线或放置重物于电线上。
如双手潮湿，请勿接触本产品及附属电源线路。
采用壁装或吊装方式安装本产品时，请确保支架安装牢固，以免发生意外事故。
长期不使用本产品时，应切断产品的电源将产品妥善包装，并采取必要的防潮措施。
目录一、产品概述 (2)二、产品外观 (2)三、技术参数 (3)四、使用指南 (5)4.1 工作环境 (5)4.2 产品接口 (6)4.3 设备连接 (7)4.4 网页插件安装 (8)4.5 网页管理 (8)一、产品概述天地伟业卫士系列网络摄像机是基于最新的H.264视频压缩技术开发的新一代个人及家庭视频监控产品，天地伟业卫士系列网络摄像机采用高性能ASIC核心处理芯片，具备强劲的视频压缩处理能力，与市场上大部分的民用摄像机只能在ADSL下提供每秒5-7帧的M-JPEG图像相比，天地伟业卫士系列网络摄像机采用最先进的H.264压缩算法，可以实现高清分辨率下每秒25帧的全实时流畅传输。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
VC565DN 1/3英寸高分辨率 日夜彩色摄像机
z DSP （数字信号处理）清晰勾边图像 z 彩色和黑白双模式
z 在低照度条件下自动由彩色切换为黑白 z 电子光圈 z 智能背光补偿
z 连接视频或者直流驱动自动光圈镜头 z 行同步或内部同步
VC565DN 1/3英寸高分辨率数字日夜摄像机结合了出色的图像质量和先进特性。
摄像机为彩色和黑白双模式，并具备数字信号处理（DSP ）。
DSP 控制提供勾边和细节再现。
CCD 装置超过379，000像素（437，000 PAL ），提供生动的彩色图像，并且色彩表现精确。
VC565DN 可在任何照度水平下供给视频图像。
摄像机可设置从彩色模式转换成黑白模式。
当摄像机感应到拍摄区域的光线数量时，会根据需要自动开或关红外线滤除镜。
对于特殊情况，用户也可手动切换模式。
智能背光补偿控制决定现场所有物体的照明条件。
夜晚模式最小现场照明0.0009尺烛光（0.01lux ）或者白天模式0.05尺烛光（0.5lu 供给可用的视频输出为f/1.2、25IRE 、，白炽照明。
夜晚模式水平分辨率580电视线，白天模式480电视线。
VC565DN 具备双重自动光圈模式，视频驱动镜头（ES 和AC 型）或者直流驱动（CS-G ）镜头。
摄像机侧面有一个连接器。
所有控制和连接器都位于后面板或侧面，方便使用。
同步可选，内锁定或行同步；通过行同步功能多台摄像机可以同步。
VC565DN 可配CS 或C 型接口镜头。
当VC565DN 和其他摄像机使用共同电源时，完全隔离的电源可保证图像稳定。
VC565DN 符合UL2044标准，并遵守FCC A 类 装置的放射要求。
相关设备和附件
型号 VC24PS-1 电源， 产品代码4297：将120 V AC 线路功率转换为 24 V AC 。
产品规格见564。
型号VC24PS-1-230电源, 产品型号4297-01：将220- 240 V AC 线率功率转换为24 V AC 。
产品规格见564。
视频特性
成像器件：1/3英寸行间转移CCD 。
有效像素：NTSC ： 768(H) x 494(V)。
PAL ：752(H) x 582(V)。
灵敏度：夜晚模式0.0009fc （0.01lux ）。
白天模式0.05fc （0.5lux ）。
条件：白炽照明，镜头f/1.2、 25IRE 视频输出。
水平分辨率：580线（夜晚模式）。
480线（白天模式）。
电子光圈：NTSC ：1/60-1/100,000。
PAL ：1/50-1/100,000。
扫描系统：NTSC 标准：2:1隔行扫描，
525行，30帧/秒。
PAL 标准：2：1隔行扫描， 625行，25帧/秒。
背光补偿：开/关可选，中心加权区。
信噪比：大于48dB 。
白平衡：自动或手动可选。
视频信号输出：1.0Vp-p VBS@75ohms 复合视
频信号。
同步：行同步，带垂直相位可调或内
部晶体控制。
增益控制：自动（AGC ），开/关可选。
伽马校正：开/关可选。
自动光圈接口：两种类型的自动光圈操作
1、视频驱动镜头（ES 和 AC 镜头）：
电源：50mA ，12VDC ； 视频输出：高阻抗。
2、 直流驱动（CS-G ） 自动光圈镜头 。
电气
电源输入：24V AC ，±20%。
输入电源隔离：内部完全隔离电源。
电流：0.4A 。
功耗：9.6W
热当量：0.55btu/min(0.14kg-cal/min)
备注：这些数字代表电能 100%转换为热能。
但实际 产生热能百分比会减少并 且因产品而异。
这些数据可 帮助决定安装冷却程度。
无线电频率
辐射标准：FCC A 类。
安全标准：UL2044 。
控制和连接器
外部控制：电源指示器：发光二极管。
自动电平控制：电位计。
自 动白平衡控制：按键。
模式 选择DIP 开关： 亮度/低亮度。
逆光补偿开/关。
自动电平控制/电子电平控 制（人工智能/电眼）。
自动白平衡/自动跟踪白平 衡。
自动增益控制开/关。
白天/夜晚开/关。
灰度校正开/关。
场相调整按键。
连接器：电源：2针接线板（侧面）。
自动光圈镜头(直流驱动)： 4针模制连接器（后面）。
自动光圈镜头（视频驱动）： 3针接线板。
视频输出： BNC （后面）。
机械
尺寸：高(H)：2.0英寸(50毫米)。
宽(W)：2.4英寸(60毫米)。
长(L)：5.0英寸(126.5毫 米)。
从底座到镜头 光学中心的
距离(X) ：1.0英寸(25毫米)。
重量：0.84磅（0.38公斤）。
法兰背部调整：12.5毫米±0.5毫米。
镜头接口：C 或CS 型接口。
摄像机安装：摄像机的顶部和摄像机底部
的1/4~20螺孔。
运输尺寸：高：3.2英寸(80毫米)。
宽：3.9英寸(98毫米)。
长：7.3英寸(185毫米)
运输重量：1.5磅（0.52公斤）。
运输体积：0.053立方英尺（0.0015立
方平米）。
环境
工作温度：14-122℉(-10-+50℃)。
湿度：相对湿度90%，无冷凝。