PLUS系统流程培训

Phase 1: Proposal
Program Start
1 Proposal
Development Start
Product Definition
Product Feasibility
DV Tool Release
2 Design & Development
DV Readiness
Your Responsibility: Read and understand reference documents 阅读并理解参考文件
Engineering Deliverables
Drawing Set
DFMEA
Bill of Materials
Engineering Budget
Gate Workbook阶段工作表
One for each PLUS Gate. Purpose of Workbook: Define required deliverables and responsibilities. Document action plans to complete deliverables. 将行动计划存档, 完成递交文件 Document status of completion.将完成进度存档 Reporting tool for Gate Review approval.作为每个门审核的汇报文件.
Final Production Release
3 Design Verification
PV Readiness
Customer Parts Approval
4 Production Validation
SOP
+3 MOS Post Launch Review
5 Launch
Phase 2: Design & Development Procedure 阶段2: 设计&开发程序
1st Customer Parts
Final Production Release
3 Design Verification
PV Readiness
Customer Parts Approval
4 Production Validation
SOP
+3 MOS Post Launch Review
Phase 5: Launch
Purpose：目的 Delivery of 0-0-100-30 launch performance.实现0-0-100-30的投放表现 Closure of all launch issues.关闭所有的投放问题 Transition program into volume production. 将项目转化为批量生产 Gate：入门 30 Days Post Launch Review投放后30天审核
5 Launch
Phase 1: Proposal Procedure
Purpose:目的 Secure profitable business with all customer requirements / assumptions base-lined. 确保在满足所有客户要求前提下保证商业利润 Secure appropriate SDT resources upon approval of Program Plan. 在项目计划批准的基础上, 确保适当的SDT资源. Gates:入门 Program Start项目启动 Development Start开发启动
PLUS PRODUCT LAUNCH SYSTEM 产品生产投放系统
Agenda安排 Banner图标 Objectives目标 Milestones & Reviews时间节点和回顾 Phase Workbook阶段总结表 Deliverables功能任务
The PLUS phases, deliverables and milestones that translate product ideas into profitable defect free products are depicted on the PLUS Banner. PLUS系统中的阶段,任务和时间节点把产品的设计思想转化为有利润空间、无缺陷的最终产品.并在以下图表中描述出来.
Phase 4: Production Validation
Purpose:目的 Validate final product and process using production tooled parts.用生产工装件来验证最终的产品和工艺 Verify supplier readiness and part approval. 验证供应商准备和零件批准 Confirm customer rate and gain customer approval.确认可以满足客户生产节拍并取得客户批准 Gates: 入门 PV Readiness PV 准备 Customer Parts Approval客户零件批准
5 Launch
Phase 3: Design Verification Procedure 阶段3: 设计验证程序
Purpose: 目的 Verify product design through DV testing and customer vehicle evaluation.通过DV测试和客户整车评估来验证产品设计 Complete design to support production released drawings.完成设计, 支持生产图纸下发. Gates:入门 DV Readiness DV准备 1st Customer Parts首批客户样件 Final Production Release最终的生产下发
DV Readiness
1st Customer Parts
Final Production Release
PV Readiness
Customer Parts Approval
SOP
+30 Days Post Launch Review
5 Launch
Phase 5: Launch Procedure 阶段5: 释放程序
Program Start
1 Proposal
Development Start
Product Definition
Product Feasibility
DV Tool e
2 Design & Development
DV Readiness
1st Customer Parts
Program Start
1 Proposal
Development Start
Product Definition
Product Feasibility
DV Tool Release
2 Design & Development
DV Readiness
1st Customer Parts
Phase 3: Design Verification
Program Start
1 Proposal
Development Start
Product Definition
Product Feasibility
DV Tool Release
2 Design & Development
DV Readiness
DVP
Parts and assembly
RSO
DSO
SSO
Updated plans for engineering labor, prototype tooling, parts and testing compared to approved Engineering Budget. Attach to approved PD3/PD4, if required. Outside Service Matrix for Low Cost Country or External Engineering Resources. 已更新的工程人工，样件及样件模具，测试等计划于已批准的工程 预算做比较。若有需要，附上已批准的PD3/PD4 更新低成本国家外围服务矩阵或外部工程资源
1 Proposal
2 Design & Development
3 Design Verification
4 Production Validation
Program Start
Development Start
Product Definition
Product Feasibility
DV Tool Release
Phase 2: Design & Development
Purpose: 目的 Complete design to establish both product / theme definition and product feasibility for DV tool release. 完成设计, 为DV工装的下发建立产品/主题定义和产品的可行性. Gates:入门 Product Definition产品定义 Product Feasibility 产品可行性 DV Tool Release DV模具开发
Final Production Release
3 Design Verification
PV Readiness
Customer Parts Approval
4 Production Validation
SOP
+3 MOS Post Launch Review
5 Launch
Phase 4: Production Validation Procedure 阶段4: 生产确认程序
Gate Workbook
Reference documents added参考文件 Provides full understanding of deliverables使得对表中文件更好的理解 Written by functional leads由各职能部门编写
Gate Workbook
Approved. 批准 Updates require the PD3/PD4 change process.任何更新要 通过PD3/PD4的更改程序
Updated plans for engineering labor, prototype tooling, parts and testing compared to approved Engineering Budget. Attach to approved PD3/PD4, if required. Updated Outside Service Matrix for Low Cost Country or External Engineering Resources. 已更新的工程人工，样件及样件模具，测试等计划于已批准的工程 预算做比较。若有需要，附上已批准的PD3/PD4 对于低成本国家或使用外部工程资源的项目，更新外部服务矩阵
Gate workbook apply for all program complexities.阶段工作表使用于所有复杂的项目 Deliverables can be modified based on program scope.表中的内容可根据项目总观做相应的改动
Gate Workbook
Deliverables by function with requirements for Gate Sign-Off 标有入门签发要求的,部门所需递交的文件
1st Customer Parts
Final Production Release
3 Design Verification
PV Readiness
Customer Parts Approval
4 Production Validation
SOP
+3 MOS Post Launch Review