PAL20R6-5JM中文资料
德国凯勒数控仿真教学软件 keller cnc宣传页
G59
卡式增量的零点位移和旋转
G80
结论轮廓描述
G81
纵向粗车
G82
断面粗车循环
G84
钻孔循环
G85
进刀槽循环
G86
端面镗孔循环
G88
侧面攻螺纹循环
G90
绝对编程
G91
增量编程
G92
转速限制
G94
进给速度
G95
进给
G96
恒定切削速度
G97
以转速 进给
由多媒体、模拟器和工作手册
（ 彩 色 ， 120页 ） 组 成 的 PA L p l u s “ 套 餐 ” 是 未 来 最 好 的 PAL考试准备材料。
斯弗里德 - 凯勒 （德国凯勒公司董事长） 二零零九年九月 于德国 乌珀塔尔
在来KE自L中LE国R唐公山司的接学受员培训
数控机床的了解与设立
车间
针对初学者或刚入门的学员，系统提供了一 套借助于影像方式模拟的车间环境，对机床 的构造和相关的部件、功能，比较容易地认 识。
通过精彩的动漫技术，学员可以直接了解数 控机床及相应的基础知识，如：工装夹具、 滚珠螺杆等。
虚拟车间和虚拟机床教学方式直接地回答了 一个问题 „这个功能是怎样的？“ 这可以使 学员数控技术学习中，提高兴趣和动力。
数控机床的仿真模拟使学员很容易地获得机 器主轴、坐标定位和编程等知识。通过大 量提示和帮助功能，学员可以进行自学和操 作。该软件中，以SINUMERIK 802C做为标 准教学仿真系统和操作面板。
最终要使得每个学员，在编写数控程序这一 较难的题目中，一般经过两次失败后， 能得到解决问题的办法和很好地掌握编程， 这也是凯勒软件的真正用意所在。
多媒体
2 MP PIR 全时彩色摄像头说明书
•2 MP, 1920 × 1080 resolution•24-hour color image•130 dB true WDR, 3D DNR•2.8 mm fixed focal lens•Smart Light, up to 20 m white light distance•PIR detection, strobe light alarm, alarm out/audible alarm •Built-in siren•4 in 1 video output (switchable TVI/AHD/CVI/CVBS)•IP67CameraImage Sensor 2 MP CMOS Signal System PAL/NTSC Resolution1920 (H) × 1080 (V)Frame Rate TVI: 1080p@30fps, 1080p@25fps AHD: 1080p@30fps, 1080p@25fps CVI: 1080p@30fps, 1080p@25fps CVBS: PAL/NTSCMin. illumination0.0005 Lux @ (F1.0, AGC ON), 0 Lux with White LightShutter Time PAL: 1/25 s to 1/50, 000 sNTSC: 1/30 s to 1/50, 000 sSlow Shutter Max. 16 timesLens 2.8 mm fixed lensField of View 2.8 mm, horizontal FOV: 104°, vertical FOV: 54°, diagonal FOV: 126°Lens Mount M16Flashing Light Alarm (Red & Blue)YesAudible Alarm YesDay & Night ColorWDR (Wide Dynamic Range)≥130 dBAngle Adjustment Pan: 0 to 360°, Tilt: 0 to 75°, Rotation: 0 to 360°MenuWhite Light Auto/O ffImage Mode STD/HIGH-SATAGC YesWhite Balance Auto/ManualAE (Auto Exposure) Mode WDR/BLC/HLC/Global/HLSAnti-B anding YesPrivacy Mask 4 programmable privacy masksMotion Detection 4 programmable motion areasNoise Reduction3D DNR/ 2D DNRLanguage EnglishFunction Brightness, Sharpness, Mirror, Smart Light, Defective Pixel Correction InterfaceVideo Output Switchable TVI/AHD/CVI/CVBSAlarm 1 alarm outGeneralOperating Conditions -40 °C to 60 °C (-40 °F to 140 °F), humidity 90% or less (non-condensing)Power Supply 12 VDC ± 25%*You are recommended to use one power adapter to supply the power for one camera.Power Consumption Max. 6.6 W Protection Level IP67MaterialEnclosure: Plastic Main Body: Metal White Light RangeUp to 20 m PIR RangeAngle: 110°, Range: 11 m CommunicationHIKVISION-C DimensionsΦ 109.82 mm × 93.66 mm (Φ 4.32" × 3.7")Weight Approx. 390 g ( 0.86 lb.)Available ModelDS-2CE72DFT-PIRXOF28DimensionAccessoryDS-1272ZJ-110-TRS Wall Mount DS-1275ZJ-SUS Vertical Pole Mount DS-1276ZJ-SUS Corner Mount DS-1281ZJ-S Inclined Ceiling MountDS-1280ZJ-S Junction Box DS-1280ZJ-TR13Junction Box。
奥林巴斯 E-20 快速参考说明书
Matsuura MX-520 5轴立式加工中心说明书
External PC
Machining center
Collision Avoidance during Setup
Tool length compensation data is linked with the Intelligent Protection System. As NC data changes, PC compensation data is automatically updated.
Opening width 805 mm (31.69 in.)
Chain magazine with 60 tools
Easy tool setup Easy operator access to the spindle
365 mm (14.37 in.)
Crane access
Distance from machine front to table center 385 mm (15.15 in.)
C-axis rotation angleʢalong the Z-axisʣ 360deg
Maximum Work Size
Max. work dimensions Loading capacity
Ø520ʷH350 mm
(Ø20.47ʷH13.77 in.)
200 kg (440 lb.)
H350 mm (H13.78 in.)
Part Name Material Dimensions
Automotive valve A5056 Ø100ʷ74 mm (Ø3.93ʷ2.91 in.)
Programming Method
One-hit machining achieved the complex shaped prototype. Simplified machining process by combination of Tilted Working Plane Command & Tool Center Point Control. Using the simple jig enables 46 faces index machining and reduce the jig cost significantly.
创维20xxxTV系列图纸
R46 47R
R47 47R
1 2 3 4
1 2 3 4
MIV2571-2B
R811 10K
C812 103
10K R802 R804 10K T1 T2 T3 T4 T5
U801 BT BM1 SCL SDA AS
470U
470U
R814 4.7K
C802 4.7U
+5V
C813 1U
R702A 47R
D 5-8
G S 4 U38 1-3 IRF7805
D8 L101 C321 C322 C323
C324 C99 C100
U18 1-3 5-8 D IRF7404 G PWR-CNTL S
ADD U4V for DPTV 3D 1 3 U40 5 FAN2500S25 For DPTV PLL RAMDAC Power A
+5V输 出 3 U34 2 AS1117 For PP135 Digital Power
ht
tp :
1
ht tp : // zg j dw x. 5d 中 6 国 d. 家 co 电 m 维 /b 修 b 论 s. 坛 ph
p
辉 达
电
子
辉 达
1 2 3 4 5 6
dw x. 5d 中 6 国 d. 家 co 电 m 维 /b 修 b 论 s. 坛 ph
zg j
S
D 5-8 1-3 U37 IRF7807 4 G
4 D 1-3 U21 5-8 IRF7404
HS
For Intervor
10
13 U4 74LS04
PTV-PWR-CNTL
U19 3 LT1084 2
Praktica BX 20 相机说明书
Praktica BX 20This camera manual library is for referenceand historical purposes, all rights reserved.This page is copyright by , M. Butkus, NJ.This page may not be sold or distributed withoutthe expressed permission of the producerI have no connection with any camera companyOn-line camera manual libraryIf you find this manual useful, how about a donation of $3 to: M. Butkus, 29 Lake Ave., High Bridge, NJ 08829-1701and send your e-mail address so I can thank you.Most other places would charge you $7.50 for a electronic copy or $18.00 for a hard to read Xerox copy.This will help me to continue to host this site,buy new manuals, and pay their shipping costs.It'll make you feel better, won't it?If you use PayPal.. use the link belowVenmo is @mike-butkus-cameraClick here to go to main Camera Manual siteWith the PRAKTICA BX 20 you have bought a high-quality 35 mm SLR camera that combines ease of operation with a versatility ideal for any kind of creative work.The shutter speeds are automatically controlled within the range from 1/1000 s to 40 s.(seconds)In addition, the camera's microelectronics permit the use of fixed shutter speeds between 1/1000s and 1s as well as unlimited shutter speeds with the B setting. TTL light metering with open aperture and, thus brightest viewfinder image is made possible by the electronic transfer of the aperture setting from the lens to the camera. The PRAKTICA BX 20 is also equipped with a system which, if a dedicated computerized flash unit is used on the camera, measures the light coming in from the flash unit, makes a split second evaluation, and closes the shutter as soon as the right amount of light has struck the film. It goes without saying that conventional electronic flash units can be plugged onto the camera as well. Manual corrections of the automatically controlled shutter speeds are possible for the purpose of deliberate overexposures and underexposures.LEDs on both sides of the clear and bright viewfinder image indicate the shutter speed to be expected, limits, mode of operation (automatic or semi-automatic), memory function, exposure compensation and flash readiness including the O.K. signal for dedicated computerized flash units. The bottom of the finder image provides information on the preselected aperture and whether the shutter is wound or not. The PRAKTICA BX 20 accepts an auto winder and the wide range of PRAKTICA accessories.FEATURES· SRL camera for a frame size of 24mm x 36mm open-aperture TTL metering system with electronic aperture setting transfer· automatic electronic shutter speed control (stepless) in the range from 1/1000 s to 40 s· change-over from automatic to semi-automatic mode possible; fixed speed range from 1/1000 s to 1 s· electronic TTL metering system for flashes and correct dosage of light for dedicated computerized flash unit,X synchronization (approx. 1/100s)· flash readiness indication (and "flash O.K." signal) in viewfinder image· LED information on expected shutter speed in viewfinder· indication of overexposure or underexposure· aperture setting displayed at bottom of viewfinder image· shutter "winding" information· manual exposure compensation of + 2 exposure factors, indication of compensation by red LED at,, + a· locking of metered value and indication there of by green LED at "AEL" - (automatic exposure lock)· self-timer (approx. 10 s) with starting button serves also as stop-down lever for depth-of-field checking· focusing system comprises Fresnel lens with innovative diagonal triple wedge, microprism ring and ground glass ring· viewfinder image shows approx. 95 per cent of picture sides· PRAKTICA bayonet (flange focal length 44.4mm internal diameter 48.5 mm)· connection for motor winder· film information holder on camera back· indication of battery condition in viewfinder· power source: 6V primary battery(e. g. PX281Mallory) (Webmaster: a note stuck inside the manual states 4-LR44, 4-SR44 [Silver Oxide batteries - longer lasting] or PX28 battery [basically two SR-44 batteries in one cell] also a note about a new battery holder). All of these are common batteries available in large department stores or camera stores.· silicon photo element as light sensor· metering and control range: 0-17 EV at 100ASA and aperture 1.4· dimensions of body:141mm x 88mm x 49mm· weight of body without battery: 510 gGuide to individual of parts Mike ButkusInserting the batteriesA 6 V source is required to power the whole electronic system. It may be an alkali-manganese, silver oxide (SR) or lithium battery.Four button cells (e. g. LR 44) in a battery case (order no. 961 363) will also do. (the bumps on the batteries are the negative sides, the two bumps should go in the same direction)Under normal conditions, a fresh battery lasts for about 2 years. To insert the battery, push the battery compartment lid (34) in the direction of the arrow and swivel it out Wipe the contacts in the batterycompartment and those of the fresh battery with a dry cloth. Press the plus pole of the battery against the springcontact (polarity marks in the battery compartment) and tip the battery in. Close the lid and let it click in.The contacts of the battery and in the compartment should be checked from time to time, and cleaned ifnecessary. Low temperatures have an adverse effect on the battery; it should therefore be suitably protected in cold weather.If the camera is not used for an extended period, the battery should be removed.Checking the batteryThe shutter must be wound. Press shutter release (22) and then memory key (12). If the LED indication is bright the battery still has a sufficient power reserve. When the battery is spent, the LEDs on the right side of the viewfinder image will go out. The battery condition can not be checked in the B andsetting.Opening the backPull the rewind button (18) up as far as it will go to unlock the back Open the back completely the frame counter (5) will automatically return to the starting position.Inserting the filmBefore the film is inserted the shutter speed dial should be set to a fast fixed shutter as otherwise a slow shutter speed may be formed in the "auto" mode. The winding lever is blocked until the shutter has completed operation. Do not use force! An undesired slow shutter speed that may have formed in the "auto " mode can be cut short by changing from "auto" to B. Such a slow speed is also obtained in the "auto" mode when the shutter is released without a lens being connected to the camera.Put the film cartridge into the cartridge compartment (31). Press the rewind button (9) back in all the way; turning it if necessary. Insert the film leader at least 1 cm into the slit in the take-up spool (28). Carefully operate the winding lever until the teeth of the film sprocket (29) engage in the film perforation.. Swing the winding lever fully out and let it return. Release the shutter.Closing the backPress the middle of the lock side of the back against the camera body until the lock is heard to engage.Preparing to shootThe winding lever (6) may be swung out a little way without starting the winding procedure. This readiness position increases the handling reliability when taking rapid picture sequences. Swing the winding lever as far as it will go, return and press the shutter release (22). Repeat the procedure and continue to do so until the automatic frame counter (5) indicates frame 1.Information on whether the shutter is wound or not is given at the bottom of the viewfinder image:* aperture reflected into viewfinder appears red -shutter is not wound* aperture reflected into viewfinder is colorless -shutter is woundProper film advance can be checked by making sure the rewind button (9) rotates as the winding lever (6) is moved.If you shoot with a winder attached to the camera refer to the instructions for use of the PRAKTICA winder made by VEB PENTAGON DRESDEM We shad not be liable to you for damage caused by using a winder of different make.Setting the film speedPress the unlocking key (11) and turn the film speed dial (10) until the film speed given on the pack (ASA value) matches the index of the compensation indicator (26). The flap from the film pack can be put into the memo holder (33) as an additional aid to the memory.The TTL metering system automatically takes into account all factors influencing the exposure such as focal length of the lens, filters and extensions.If lenses with the 42x1 PRAKTICA thread are used with an adapter, light metering is automatic at working aperture.Preselecting the apertureThe desired aperture is set against the mark on the lens by fuming the aperture setting ring (13). The set aperture is displayed at the bottom of the viewfinder image.Automatic mode, indicationShutter releaseIf the cycle needs to be broken off prematurely with a very long shutter speed (e. g. after an accidental shutter release), the shutter speed dial (21) should briefly be turned to B.Locking the metered value (exposure lock - AEL)To store the metered value first depress the shutter release (22) slightly (camera is wound) to initiate themetering process, and then briefly press the memory button (12) to lock in the metered value (LED at "AEL" is lit).No new measurement is made before the shutter is released, and the shutter speed will correspond to the locked value. The locked value is erased when pressure is removed from the shutter release and the electronics are switched off.Exposure compensationLift the film speed dial (10) and turn the exposure compensation indicator (26) to the desired value.An LED (+/-) on the left side of the viewfinder image indicates that the shutter speed is overridden. Starting from the initial position the shutter speed is reduced in the ,,auto" mode by 1 or 2 exposure factors when the dial is set to + 1 or +2, respectively. The speed is correspondingly increased when the dial is set to -1 or -2. The dial can be set to half factors. At the limits of the film speed range - 12 ASA and 3200 ASA compensation by two factors is also possible.However, the compensation cannot extend the shutter speed range beyond the speeds of 111000 s and 40 s. Remember to return the dial to the neutral initial position after exposure-compensated shots. The LED (+) will then go out.Semi-automatic modeIf you want to shoot at a particular shutter speed, for reproductions or scientific work for example, set the PRAKTICA BX 20 to semi-automatic mode. Fixed shutter speeds from 1 s to 1/1 000 s and the B setting for any length of time are available. Select the speed you want using the shutter speed dial (21) this automatically changes the camera operation to semi-automat/c mode. As with automatic shutter speed control, the camera's electronics are switched on by gentle pressure on the shutter release.The shutter speed can again be checked using the LEDs in the viewfinder: While the LED corresponding to the set shutter speed flashes, the shutter speed required by the lighting conditions, the film speed and the selected aperture is shown at the same time by a steadily lit LED (two adjacent LEDs light up for intermediate speeds).To match the two, alter the aperture or shutter speed until the LED is lit steadily. There is no LED display for the B setting. The fixed shutter speeds will not be changed by the described correction procedure.Holding the cameraThe illustration shows the best position in which to hold the camera. It should be held steadily and tightly, the elbows should be supported against the body. In this way blur free pictures will be achieved.Flash photographyIf the available light is insufficient for handheld shots (e. g. indoors) or if the subject has to be additionally brightened up, flash should be used. All fitting electronic flash units can be used, computerized or not. Just push the flash unit onto the hot shoe (23); the electrical connection is thus made.For electronic flash without computer control set the shutter speed dial (21) to . The speed will then be 1/100s.If a dedicated computerized flash unit is pushed onto the hot shoe and the shutter speed dial (21) set to "auto", an LED at the viewfinder edge () will signal flash readiness, and the "auto" indication will go out. Flashreadiness will also be indicated in the case of a computerized flash unit when the dial is set to ..Correct exposure is guaranteed by the camera's TTL light metering system: the reflected flash light passes through the lens, is evaluated by the camera computer, and the flash is cut short at the right moment via the cableless hot shoe connection - genuine automatic TTL metering also for flashes.The "flash O.K." signal (film is correctly exposed) is derived from the flash readiness indication. If the LED at lights up again immediately after exposure, the correct amount of light has struck the film. The O.K. signal of the flash unit should be observed in cases deviating from the norm. Flash readiness is retained even if the memory key is pressed and the green LED at "AEL" signals the locking of the metered value. Exposure compensation signaled by the LED at (+ / -), is taken into account by the automatic flash system.To avoid incorrect exposures with flash when the surrounding light is bright, check by switching off thecomputerized flash unit that the shutter speed corresponding to the surrounding light is slower than 1/125 s. See also the operating instructions for the flash unit for detailed information. Changing the lensPress the unlocking key (2) and turn the lens anticlockwise as far as it will go. Remove the lens from me camera.Insert the PRAKTICA lens in such a way that the red marks (16 and 2) on the camera and lens are opposite eachother. Press the lens against the camera body and turn clockwise until the locking pin is heard to engage.By using the PRAKTICA adapter all original PRAKTICA lenses with the M 42x 1 thread can be connected. Lenses of other makes with the M 42x 1 thread must be suitable for PRAKTICA cameras and equipped for metering at working aperture.The PRAKTICA BX 20 also works automatically with screw-thread lenses, the only difference being that the light metering is made at working aperture.FocusingFocusing is possible with the triple wedge system, the microprism ring or the ground glass ring.1. Triple wedgeThe wedge system allows highly accurate focusing. Optimum sharpness is achieved when the contours and lines flow naturally. Incorrectly aligned edges indicate that the image is out of focus.2. Microprism ringThe image is correctly focused when the image inside the grid is c/ear and flicker free.3. Ground glass ringEspecially useful in photomacrography and photomicrography and when using lenses with a small relative aperture (greater than 4). The image must a p pear clear and sharp in the ground glass ring.Depth-of-field indicationInfrared photographyInfrared photography requires a slight correction to the focusing: match the distance determined in focusingLocking the release buttonAccidental shutter release and unnecessary use of power as a result of unintentional pressing of the shutter release button when the camera is wound or not can be avoided by locking the release button.To this end, the lock (20) below the shutter speed dial is fumed in the direction of the arrow. To unlock turn in the opposite direction.period with fast shutter speeds. If this is not desired, the motor winder should be switched off.To avoid incorrect metering in the automatic mode the eyepiece should be covered with the eyepiece coyer supplied.Changing the filmThe frame counter (5) indicates the number of frames which have already been exposed on a film. If all the frames on a film have been exposed (red mark at 20 or 36), change the film.Press in the rewind release (18) until it locks, fold out the rewind crank (8) and turn in the direction of the arrow until increased resistance followed by easy movement indicate that the film has been fully rewound. Pull the rewind button (9) all the way up to unlock the back. The film cartridge can now be removed. Do not change the film in bright sunlightAttention! If more frames are exposed than are indicated on the film pack, it is possible that the winding lever cannot be swung all the way. Do not use force. Rewind the film as described above, then swing the winding lever fully out.CARE OF THE CAMERA· Protect the camera from impact, dust and moisture.· Clean the cartridge and spool compartments, the film track and the back from time to time with a soft brush. · Do not use organic solvents such as spirit or varnish thinner to clean the camera.· Do not expose the camera or lens to aggressive vapors.· Remove fingerprints from the lens and eyepiece surfaces with lens cleaning paper.· Do not touch the mirror, field lens or shutter blades. Such contamination can only be removed by a service workshop.· Use an optical brush for dust removal, or blow out· Do not expose the camera to very high or low temperatures for lengthy periods. Avoid, for example, placing the camera in a car window in direct sunlight· The camera should be suitably protected from extreme cold.· When using the camera near the sea or on the beach, protect it from salt water, spray and sand.· Avoid sudden changes in temperature. These may lead to the formation of condensation and thus to corrosion damage.· Never attempt to make your own repairs to the camera. Consult a service workshop where necessary.THIS IS NOTED ON AN EXTRA PAGE ADDED TO THE MANUAL Your PRAKTICA BX 20 has an improved battery compartment lid.Please note the following when inserting the battery:Push the lid (34) in the (changed) direction of the arrow and open it.Close the lid after battery insertion and lock it.Please note carefully all the instructions contained in this booklet. Incorrect handling of your camera can lead to damage not covered by our guarantee.Further development of the PRAKTICA BX 20 may result in some aspects of the camera deviating slightly from those given here.。
Canon REALiS WUX7000Z、WUX6600Z和WUX5800Z LCOS投影仪说明书
The projectors are compatible with six interchangeable lenses with high-performance Genuine Canon Optics. These options include the Ultra Short Fixed Lens RS-SL06UW, which features Marginal Focus compatibility, a short throw ratio of 0.54:1 and a lens shift of V: -15% – 75%, H: ±30%.The projectors’ laser light source provides up to 20,000** hours or more of continuous, reliable projection with true-to-life colors. The total cost of ownership is greatly reduced when compared to conventional lamp projectors as there is no lamp to replace.INTERCHANGEABLE LENS LASER LCOS PROJECTORSCOMPACT AND FLEXIBLE LASER PROJECTORSEXPAND INSTALLATION POSSIBILITIESThe REALiS WUX7000Z, WUX6600Z and WUX5800Z LCOS Projectors combine a long-lasting laser light source and a compact, innovative design for flexible installation. The projectors provide a high brightness of 7000, 6600 and 5800 lumens, native WUXGA (1920 x 1200) resolution, a high contrast ratio of 4000:1*, high dynamic range (HDR) compatibility and advanced features for high-quality images. The projectors are compatible with six interchangeable Genuine Canon lens options that can be quickly and easily installed. With high versatility and a compact size, these projectors are ideal for difficult applications where durability is crucial, and in a variety of fields from higher education to corporate and more.LASER LIGHT SOURCE FOR BRILLIANT COLORS AND LOWER TOTAL COST OF OWNERSHIP• DICOM® Simulation Mode Markets/Applications recommended for:• Higher Education • Corporate • Houses of Worship • Museums and Galleries •E ntertainment • L arge Conference Rooms/Auditoriums • C ommand and Control Centers • Digital Signage •S imulation and TrainingCOMPACTUP TO 20,000 HOURS OR MOREUP TO 20,000 HOURSSIX INTERCHANGEABLE LENS OPTIONS WITH GENUINE CANON OPTICS * All white: all black. When standard RS-SL01ST projection lens used. When the iris function is set to "Close 9." ** This is an estimated value, actual hours may vary depending on usage and environment. This is not a guarantee of the life span of individual laser diodes. *** WUX7000Z/WUX6600Z/WUX5800Z values respectively. When in Presentation Mode and when standard RS-SL01ST projection lens used. ^ These projectors include a DICOM Simulation Mode. They have not been cleared or approved for medical diagnosis and should not be used for these purposes.LIMITED WARRANTY COVERAGE5 YEAR| 1-800-OK-CANON Canon U.S.A., Inc. One Canon Park, Melville, NY 11747PRINTED IN U.S.A. 4/18PROJECTION SYSTEMImaging Device 0.71” LCOS Reflective Panels x3Aspect Ratio16:10Native Resolution 1920 x 1200 (WUXGA)Brightness WUX7000Z: 7000/4900/3500 Lumens*1, 2, 3, WUX6600Z: 6600/4620/3300 Lumens*1, 2, 3, WUX5800Z: 5800/4060/2900 Lumens*1, 2, 3Contrast4000:1*4Digital Keystone V: ±20°, H: ±20° Uniformity 90%*2IMAGE ADJUSTMENTSImage ModeStandard, Presentation, Dynamic, Vivid Photo, Video, Cinema, Photo/sRGB,User 1 – 5 (WUX7000Z)/User 1 – 4 (WUX6600Z)/User 1 – 3 (WUX5800Z), DICOM SIM*5Color AdjustmentColor Level, Color Balance, Color Temperature, Gain (R,G,B), Offset (R,G,B)Screen Color Correction Normal/Greenboard/Adjust (custom)Mounting360°Adjustment Feet 4x, Extension Length: 14.6mm, Maximum angle of inclination: ±1.8°INPUT SIGNALSScanning Frequency H: 15.625kHz – 75kHz, V: 24Hz – 60HzAnalog PC Input WUXGA, UXGA, WSXGA+, SXGA+, WXGA+, FWXGA, WXGA, SXGA, XGA, SVGA, VGA Digital PC InputWUXGA, UXGA, WSXGA+, SXGA+, WXGA+, FWXGA, WXGA, SXGA, XGA, SVGA, VGA DisplayPort1080p, 1080i, 720p, 576p, 576i, 480p, 480i*6Component Video Input1080p, 1080i, 720p, 576p, 576i, 480p, 480i Dot Clock 162MHz (maximum)LIGHT SOURCEType Blue Laser Diode, Yellow Phosphor LifeUp to 20,000 Hours*7TERMINALSDVI-I Digital PC/Analog PC Input HDMIDigital PC/Digital Video Input DisplayPort Digital PC/Digital Video InputMini Dsub15Analog PC2/Component Video InputMini Jack Stereo Audio, Wired Remote Control Connection Dsub9RS-232C Control USB Type A USB Connection Wi-Fi®IEEE 802.11b/g/n RJ-45HDBaseT™/NetworkBUILT-IN SOUNDInternal Speaker 1W, StereoREMOTE CONTROLWireless Remote Infrared (Supplied) or Wired (Optional)RATINGSFan NoiseWUX7000Z/WUX6600Z: 36dB/32dB/29dB*1, WUX5800Z: 35dB/32dB/29dB*1Power Consumption WUX7000Z: 540W, WUX6600Z: 525W, WUX5800Z: 485W Standby Power 1.6 – 0.28W*8Heat Dissipation WUX7000Z: 1843 BTU/h, WUX6600Z: Up to 1792 BTU/h, WUX5800Z: Up to 1655 BTU/h Power VoltageAC100 – 240 V, 50/60 HzOperating Temperature 32°F – 104°F (0°C – 40°C), 20%RH – 85%RH Storage Temperature -4°F – 140°F (-20°C – 60°C)Dimensions (W x H x D)W: 19" (480mm), H: 7.7" (196mm), D: 21.4" (545mm)Weight37.4 lbs. (17kg) approx.SPECIFICATIONSACCESSORIESWHAT’S IN THE BOX• Projector • Lens Cap • Power Cord• Projector Remote Controller RS-RC07 (includes two AA batteries)• Important Information (book)• User’s Manual (CD-ROM)• Warranty CardREALiS WUX7000Z ITEM CODE: 2502C002UPC CODE: 013803307184REALiS WUX6600Z ITEM CODE: 2501C002UPC CODE: 013803307177REALiS WUX5800ZITEM CODE: 2500C002UPC CODE: 013803305739CONNECTABILITY*1 There are three light modes: Normal, Quiet 1 and Quiet 2. The luminance values for modes other than Normal are calculated and are not guaranteed as specifications. *2 When standard RS-SL01ST projection lens used. *3 When image mode is set to Presentation. *4 All white: all black. When the iris function is set to "Close 9." *5 These projectors include a DICOM Simulation Mode. They have not been cleared or approved for medical diagnosis and should not be usedfor these purposes. *6 Supports image signals equivalent to the HDMI terminal. *7 This is an estimated value, actual hours may vary depending on usage and environment. This is not a guarantee of the life span of individual laser diodes.*8 This value does not guarantee the service life. *9 RS-CL15 and RS-CL17 are used together to mount a projector on a ceiling.These products have not been tested for compliance with the performance standards for laser products under 21 CFR Part 1040. The products are not, and may not be, offered for sale or sold or leased in the United States until performance standard certifications have been completed.© 2018 Canon U.S.A., Inc. All rights reserved. Not responsible for typographical errors. Specifications subject to change without notice. Products not shown to scale. Certain images and effects are simulated. Canon and REALiS are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. DICOM is the registered trademark of the National Electrical Manufacturers Association for its standards publications relating to digital communications of medical information. HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. HDMI, the HDMI logo and High-Definition Multimedia Interface are registered trademarks or trademarks of HDMI Licensing, LLC in the United States and/or other countries. Wi-Fi and the Wi-Fi CERTIFIED logo are registered trademarks of the Wi-Fi Alliance. All other products and brand names may be registered trademarks, trademarks or service marks of their respective owners in the United States and/or other countries.19"7.7"SideComponentRS-232CUSBOPTIONAL LENSESRS-SL01STITEM CODE: 2505C001 1.49 – 2.24:1V: -15 – 55%H: ±10%1.5x40 – 600"23.0 – 34.5mmF1.89 – 2.65Long Zoom LensRS-SL02LZ ITEM CODE: 2506C001 2.19 – 3.74:1V: -15 – 55%H: ±10% 1.7x40 – 600"34.0 – 57.7mm F1.99 – 2.83Short Fixed LensRS-SL03WFITEM CODE: 2507C0010.80:1V: ±11.3% H: ±4.6%Fixed40 – 300"12.8mm F2.0Ultra Long Zoom LensRS-SL04ULITEM CODE: 2508C001 3.55 – 6.94:1V: -15 – 55%H: ±10%1.97x60 – 600"53.6 – 105.6mm F2.34 – 2.81Short Zoom LensRS-SL05WZITEM CODE: 2509C001 1.00–1.50:1V: -15 – 55%H: ±10%1.5x40 – 600"15.56 – 23.34mm F2.09 – 2.34Ultra Short Fixed LensRS-SL06UWITEM CODE: 2701C0010.54:1V: -15 – 75%H: ±30%Fixed40 – 300"8.39mm F2.4DIMENSIONS。
洛雷20英寸LCD DVR监控系统用户手册说明书
☠ ATTENTION:Broadband RouterINSTRUCTIONS:For detailed setupSOFTWAREREQUIREMENTS:☠ ATTENTION:*Number of channels,INfOrmATION IN ThIS dOCumENT IS SubjECT TOChANGE wIThOuT NOTICE. AS Our PrOduCTS ArE Sub-jECT TO CONTINuOuS ImPrOvEmENT, LOrEx TEChNOL-OGy INC. ANd Our SubSIdIArIES rESErvE ThE rIGhTTO mOdIfy PrOduCT dESIGN, SPECIfICATIONS ANdALL-IN-ONE PROFESSIONAL DIGITALSURVEILLANCE RECORDING SYSTEMdesigned for business or home withmulti-purpose display applicationsBUILT-IN DIGITAL VIDEO RECORDERVIEW THE INSTALLATIONVIDEO ON THE SYSTEM FORQUICK & EASY SET-UPNAVIGATION & CONTROLS1RECOMMENDEDFOR EASY USEAND NAVIGATION2RECOMMENDEDFOR USE FROM ADISTANCERETURN: Exits from a SystemNAVIGATION:Press the Enter Button toPLAYBACK:DVR Mode.between Cameras in live view modePIP:again to exit the PIP option34GROUP 1PIPPIPSET UP YOUR MONITOR FIRSTSTEP 124Connect one end of the Power adaptor to the monitor, the other end to an electrical outlet.Connect Power Cable:3Connect a USB mouse to one of the USB ports located at the side of the monitor.Connect the mouse:LEFT CLICK1Set the Time and date***:5Your system will perform the following System Check:1. Blue LED at the front flashes four times 2. You will hear 2 beeps3. Power LED at the front turns RED312PrESS ThE POwEr buTTON ONMonitor Front Panel - Power ButtonSkill Levelunder 30 minutes under 15 minutes under 60 minutes Hand ToolsHardwareRouterHi Speedover 60 minutesSkill LevelIntermediateasy RTime Tools Skills - EasyUnder 20 Minutes*hand Tools Plug & Play connectors, On screen set up* Installation time may vary based onapplication and camera cabling BASIC INSTALLATION GUIDETime and Date can be set by• Pressing the SETUP button from the front panel of the monitor • Pressing the SETUP button from the remote control (or) by • Using the mouse navigation (recommended)1. Right click the mouse and select SETUP and click on SYSTEM SETUP2. On SYSTEM SETUP MAIN Menu, select SYSTEM1234SET UP LOCAL VIEWING ON YOUR PCSTEP 2*your system muST be connected to a router prior to powering it ON.ThIS STEP rELATES TO rEmOTE vIEwING OvEr ThE LAN (LOCAL ArEA NETwOrK)by uSING A PC LOCATEd ON ThE SAmE NETwOrK AS ThAT Of ThE SySTEm.NOTE: The system will lease networking information from your Router. If you wish to set your information manu-ally, then remove the from DHCP option. Please consult your Hardware Manual for further Menu options.3Install Software (on your local computer):Insert the Lorex Client Software CD into your local computer’s CD ROM drive and proceed with the installation.25Double-click the Lorex Client software icon on your desktop to run the program.run the Lorex Client Software (on your local computer):4Close the CD Menu Screen. A Lorex Client icon and a Lorex Player icon will appear on your desktop.Set-up (on your local computer):Click the Setup icon from the Lorex Client Software Screen6Skill LevelIntermediate easy advanced RouterTimeSkills - IntermediatePlug & Play connectors, On screen set upUnder 30 Minutes** Installation time may vary based on application Skill LevelIntermediate easy advancedunder 30 minutes under 15 minutes under 60 minutes Hand ToolsHardwareRouterHi Speed over 60 minutesHardwareComputer &Router*LOCAL VIEWING INSTALLATION GUIDE* Minimum System Requirement: Windows XP, Pentium IV, 256MB Ram (512MB Recommended), 200MB Storage, High Speed Internet, DSL or Cable ModemIf the IP Address is 127.0.0.1 it means that you are either not connected to your local network or your system is not in DHCP detect mode.9Select the new Group you created using the drop down menu (1) and press the CONNECT button (2) to connect to the LOCAL LIVE site.SET UP LOCAL VIEWING ON YOUR PC STEP 2Add ‘Group’ (on your local computer):Click on the SITE listing on the Left Panel, and Right Click to ‘ADD GROUP’.Enter a name for the GROUP, and click OK.Enter Setup Information (on your local computer):Select the GROUP you created and enter SETUP information.87System192.168.1.126100ADMIN ****812 4CONNECT BUTTON12LOCAL LIvE SITECamera Selection Drop down Menu6234123456SET UP INTERNET REMOTE SECURITY MONITORINGSTEP31ddNS (dynamic domain Name System) Set-up:Open your web browser (Internet Explorer by default) and enter 2Enter ddNS Set-up on your System:Mouse navigation (recommended)An automated EMAIL this confirmation. You will need this information to access your System remotely.registration Email:1. FOR PRODUCT LICENSE Series option from the drop down menu.2. FOR PRODUCT CODE address (recorded in step 2, section 1).3. FOR URL REQUEST (e.g. tomsmith). Note: URL name should not be more than 15 characters.Complete New Account Information:543REMOTE VIEWING INSTALLATION GUIDEIntermediateTimeunder 30 minutes under 15 minutes under 60 minutesHand Tools Hardware RouterHi Speedover 60 minutesSkill Level IntermediateeasyadvancedRouterTimeHardwareSkills - Advanced60 Minutes Computer & Router*Basic Computer Skills, Router PortForwarding* Installation time may vary based on applicationSkill Levelunder 30 minutes under 15 minutes under 60 minutes Hand ToolsHardware RouterHi Speed over 60 minutes* Minimum System Requirement: Windows XP, Pentium IV, 256MB Ram (512MB Recommended), 200MB Storage, High Speed Internet, DSL or Cable ModemVISIT /SUPPORT TO VIEW THE ROUTER CONFIGURATIONGUIDEAn example of a port forwarding screen is shown for illustration purposes.1. Right click the mouse and select SETUP and click on SYSTEM SETUP2. On SYSTEM SETUP MAIN Menu, select SYSTEM3. Click on NETWORK to enable and add DDNS 1236STEPEnable ddNS Settings:7On the NETWORK menu, use the DOWN arrow key to navigate to DDNS. Highlight DDNS checkbox by pressing ENTER and press the UP arrow key to put a check mark in the DDNS checkbox. Press ENTER to accept settings.Set the ddNS Settings:1. Scroll down to the DDNS SERVER within the NETWORK menu and press ENTER.2. DDNS Server Names: LOREX (by default)3. Enter the DOMAIN NAME sent to you in the REGISTRATION CONFIRMATION run the Lorex Client Software (on your remote computer):Double-click the Lorex Client software icon on your desktop to run the program.11Close the CD Menu Screen. A Lorex Client icon and a Lorex Player icon will appear on your desk-top.Lorex Client Software (on your remote computer):1210Follow the installation screens to complete Lorex Client Software installation.9Insert the Lorex Client Software CD into your local computer’s CD ROM drive and proceed with the installation.Install Software (on your remote computer*):8LorexClienttomsmith tomsmithSUCCESS2 4 687Set-up (on your remote computer):Click the Setup icon from the Lorex Client Software ScreenSTEP1315Add ‘Group’ (on your remote computer):Click on the SITE listing on the Left Panel, and Right Click to ‘ADD GROUP’.Enter a name for the GROUP, and click OK.14OFFICE7System tomsmith 6100ADMIN ****812 4Select the new Group you created using the drop down menu (1) and press the CONNECT button (2) to connect to the REMOTE LIVE site.16SET-uP buTTON26234123456MULTIFUNCTION SYSTEM / MODESmuLTI-fuNCTION SySTEmvGA MODECOMPONENT MODEPICTURE FRAME MODEDvR MODEdvr mOdE:vGA mOdE:12COmPONENT mOdE:3PUBLIC vIEw MONITORINGREMOTE MONITORING**Please refer to Step 3INSTALLATION GUIDE MODEYou can view PIP (Picture in Picture) in order to see Component video or VGA (PC Monitor) while in DVR mode by pressing the PIP (Picture in Picture) button on your remote control.DID YOU KNOW?MULTIFUNCTION SYSTEM / MODES (CONTINUED)PICTurE frAmE mOdE:INSTALLATION GuIdE mOdE:546Pvm (PubLIC vIEw mONITOrING):Slave Monitor (not included)IT IS HIGHLY RECOMMENDED TO VIEW OUR EASY TO FOLLOW INSTALLATION VIDEO. YOU CAN PAUSE, REWIND OR FAST FORWARD TO ALLOW YOU TO INSTALL THESYSTEM WITH STEP BY STEPINSTRUCTIONS.RECOMMENDED TIPSThe stand comes with a builtorganize and conceal wiring.Cameras, Ethernet Cable and1 NOTE: Your system can be mounted 2mONITOr POwEr SAvING TIP3 SySTEm SETuP mENu:123(Example: From the UK, dial 00 instead of +)。
GAL20V8_06资料
GAL20V8 Ordering Information
Conventional Packaging Commercial Grade Specifications
Tpd (ns) Tsu (ns) Tco (ns) Icc (mA)
Ordering #
5
3
4
115 GAL20V8C-5LJ1
7.5
元器件交易网
Select devices have been discontinued. See Ordering Information section for product status.
LePAOaavpdact-kiliFaaorgbneelsee!
GAL20V8
55 GAL20V8B-25QP
55 GAL20V8B-25QJ
90 GAL20V8B-25LP
90 GAL20V8B-25LJ
Industrial Grade Specifications
Package 28-Lead PLCC 28-Lead PLCC 24-Pin Plastic DIP 28-Lead PLCC 24-Pin Plastic DIP 24-Pin Plastic DIP 28-Lead PLCC 24-Pin Plastic DIP 28-Lead PLCC 24-Pin Plastic DIP 28-Lead PLCC 24-Pin Plastic DIP 28-Lead PLCC
2
Select devices have been discontinued. See Ordering Information section for product status.
元器件交易网
PALCAM 产品安全数据表说明书
MATERIAL SAFETY DATA SHEETSection 1. Company Identification and Product InformationProduct Name or Identity: PALCAM SupplementManufacturer’s Name: Acumedia Manufacturers, Inc. Emergency Phone No.: 517/372-9200740 East Shiawassee Fax No.: 517/372-0108Lansing, MI 48912 e-mail: *********************Date Prepared or Revised: April 2010 Chemtrec: (800) 424-9300Outside US and Canada: (703) 527-3887Section 2. Composition / Information on Hazardous IngredientsThis product is a mixture of the substances listed below with the addition of nonhazardous materials.Hazardous Components Specific Chemical Identity: CAS-No. % HazardSymbolPotassium Phosphates 7758-11-4/7778-77-0 59% Xi (Irritant) Polyvinylpyrolodone (PPV) 9003-39-8 15% Xi (Irritant) Ceftazidime 72558-82-8 15% Xn (Harmful) Polymyxin B 1405-20-5 7% Xn (Harmful) Acriflavin HCl 8063-24-9 4% Xn (Harmful)Section 3. Health Hazard IdentificationHealth Hazards: (Acute and Chronic)Information pertaining to particular dangers for man and environment.R 22, Toxic, Harmful if swallowedR 41, 42/43, Risk of serious damage to eyes, May cause sensitization by inhalation and skin contact R 51/53 Toxic to aquatic organisms, May cause long-term adverse effects in the aquatic environment R 36 / 37 / 38, Irritating to eyes, respiratory system, and skin.Section 4. First Aid MeasuresEmergency / First Aid Procedures: General Information:Remove breathing apparatus only after contaminated clothing have been completely removed.Ingestion: If swallowed, seek medical attention immediately. Show physician product label or MSDS. Inhalation:If inhaled, supply fresh air or oxygen. If required, provide artificial respiration, and seek medical attention. In case of unconsciousness place patient on side position for transportation.Eye Contact:Rinse opened eye for at least 15 minutes under running water, lifting lower and upper eyelids occasionally. Seek medical attention.Skin Contact:Remove contaminated clothing. Immediately wash with plenty of soap and water for at least 15 minutes. Wash clothing before reuse. Seek medical attention if irritation develops.Section 5. Fire and Explosion Hazard DataFlash Point (Method Used): N/A Flammable Limits: LEL – N/AUEL – N/AExtinguishing Media:Use CO2,ABC multipurpose dry chemical, or water spray. Fight larger fires with water spray or alcohol resistant foam.Protective Equipment: No special measures required.Unusual Fire and Explosion Hazards:During heating or in case of fire, poisonous gases may be produced.Section 6. Accidental Release MeasuresPersonal Precautions: Wear suitable protective clothing. Remove contaminated clothing immediately. Avoid inhalation, contact with eyes and skin. Prevent formation of dust.Environmental Precautions: Prevent dispersion of material. Wipe up with damp sponge or mop. Do not let product enter drains, discharge into the environment must be avoided.Clean-up Methods: Absorb material, ventilate area, and wash spill site after material has been cleaned up.Section 7. Handling and StorageHandling: Protect against physical damage. Ensure good ventilation / exhaustion. Prevent formation of dust.Storage: Requirements to be met by storerooms and receptacles: 2 - 8°CDo not store together with oxidizing agents. Store in cool, dry conditions in well sealed containers.Other Precautions: Keep respiratory protective device available.Section 8. Exposure Controls / Personal ProtectionComponents with limit values that require monitoring:This product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.OSHA–PEL: N/A REL: N/A TLV:N/AAdditional Information: Personal Protection listed below are general requirements for laboratory personnel. Follow the usual precautionary measures for handling chemicals / powder. Avoid contact with eyes, skin, and clothing.Personal Protective Equipment:Keep away from food, beverages, and feed. Wash hands before and after entering laboratory. Immediately remove all contaminated clothing.Breathing Equipment: In case of brief exposure, use a chemical fume hood or a NIOSH/MSHA-approved respiratory. Hand Protection: Use chemical resistant gloves.Eye Protection: Wea r safety glasses or goggles.Body Protection: Wear lab coat or other protective work clothing.Section 9. Physical and Chemical PropertiesAppearance: yellow-gold to orange dried crystalline powder or cakeBoiling Point: Not determined Density: Not determinedFlash Point: Not applicable Melting Point: Not determinedAuto Igniting: Product is not self-igniting Solubility in Water: SolubleDanger of explosion: Product does not present anpH: Not determinedexplosion hazard.Solvent Content: Organic solvents – 0.0% Solids Content: 100.0%Section 10. Stability and ReactivityStability: UnstableStable X Conditions to Avoid: No decomposition if used according to specifications. Incompatibility(Materials to Avoid): Incompatible with strong oxidizers and acids.Hazardous Decomposition or Byproducts: Phosphorus oxides, Nitrogen oxides, and Carbon dioxide.Hazardous Polymerization:May OccurWill Not Occur X No dangerous reactions known.Section 11. Toxicological InformationLD/LC50 values that are relevant: no data availableCarcinogenicity Classification:IARC (International Agency for Research on Cancer): No component of this product present at levels of 0.1% or greater is identified as probable, possible or confirmed human carcinogen by IARC.NTP (National Toxicology Program):Irritant: Irritant to eyes, skin, and mucous membranes.Sensitization: no data available.Subacute to chronic toxicity: Target organs: Central Nervous System, Skin and Eyes, Respiratory tract,Additional toxicological information: Harmful. Irritant. To the best of our knowledge the chemical, physical and toxicological properties have not been thoroughly investigated.Section 12. Ecological InformationEcotoxicity Tests:Hazardous for water, toxic to aquatic organisms. Complete ecological effects have not been thoroughly investigated.Section 13. Disposal ConsiderationsWaste Disposal Method: Dispose in accordance with all applicable federal (40 CFR 261.3), state, and local environmental regulations. Contact a licensed professional waste disposal service to dispose of this material if questions arise.Container Information: Do not remove labels from containers until they have been cleaned.Section 14. Transport InformationDOT Regulations:Not RegulatedLand Transport ADR/RID (cross-border):Not RegulatedMaritime Transport IMDG:Not RegulatedMarine Pollutant:No components of this product are currently designated by the Department of Transportation to be Marine Pollutant(49 CFR 172.101, Appendix B).Air Transport ICAO-TI and IATA-DGR:Not RegulatedProduct # (s) 7987Section 15. Regulatory InformationEU Regulations: Hazard Symbol(s):Ceftazidime: Xn (Harmful)Polymyxin B: Xn (Harmful)Acriflavin HCl: Xn (Harmful)Polyvinylpyrrolidone: Xi (Irritant)Potassium Phosphate: Xi (Irritant)Risk Phrases:R 22, Harmful if swallowed.R 41, 42/43, Risk of serious damage to eyes, May cause sensitization by inhalation and skin contactR 51/53 Toxic to aquatic organisms, May cause long-term adverse effects in the aquatic environmentR 36 / 37 / 38, Irritating to eyes, respiratory system, and skin.Safety Phrases:S 7, Keep container tightly closed.S 22, Do not breathe dust.S 26, In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.S 29 / 56, Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point. S 36/37/39, Wear suitable protective clothing, gloves, and eye/face protection.S 45, In case of accident or if you feel unwell, seek medical advice immediately.S 61, Avoid release to the environment.Section 16. Other InformationThis document is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide. Acumedia Manufacturers shall not be held liable for any damage resulting from handling or from contact with the above product. These suggestions should not be confused with state, municipal or insurance requirements, and constitute NO WARRANTY.Page 4 of 4。
总线调整中英文对照
总线调整中英文对照总线调整中英文对照1 3.58或3 表示3.58MHz NTSC制2 4.43或4 表示4.43MHz副载波或PAL3 50Hz或5 加在调整项目中,特指此调整项目针对50Hz场扫描4 60Hz或6 加在调整项目中,特指此调整项目针对60Hz场扫描5 50Hz C POS 50Hz行中心校正6 H - SIZE 行幅7 - AMP: 场幅8 - HEIGHT9 - LINERITY 场线性10 - PHASE 场相位(场中心)11 - S - CORRECT 垂直S校正12 ABL ABL(自动亮度限制);ABL开关13 ABL CONT ABL(自动亮度限制)控制值14 ABL GAIN 自动亮度控制增益15 ABL POINT 自动亮度控制点16 ABL STAR ABL(自动亮度限制)起始值17 ADDRESS 地址18 ADJUSTMENT 调整19 AF 自动频率控制状态20 AFC AFC;AFC环路增益;AFC开关;AFC模式21 AFC MODE EXT 自动频率控制外接模式22 AFC MODE T 自动频率控制电视模式23 AFF AFC关断24 AFT 自动频率微调;PF CO(图像中频压控振荡器)调整;中频CO25 AFT/SKIP 自动微调/跳跃26 AFTO AFT输出27 AGC 自动增益控制;AGC自动/恒定;AGC起控点28 AGC - TAKE AGC起控点29 AIP 调整中频锁相环30 AKB 显像管暗平衡自动调整;AKB关断蓝截止31 AL 自动音量调整32 ALIGN; 调整33 ALIGNMENTS34 ALS 音频电平设置35 AMPLI50Hz 50Hz场幅调整36 AS 自动扫描37 AUDIO 伴音;音频38 AUTO FLESH 自动肤色校正39 AUTO SRCH 自动搜索40 A 音频/视频;视频设定;A输入端子数41 A MODE A模式42 A SHARPNESS A锐度43 A TINT A色调44 AI ONLY Y/YN 可选择一路A或两路A输入45 A-MODE A模式46 AX AGC删除47 B;B- 显像管亮平衡蓝色调整48 B BIAS;B_;B CUT OFF 蓝偏置;显像管阿暗平衡蓝色调整49 B DRIE(GAIN) 蓝色激励(增益);显像管亮平衡蓝色激励调整50 BLUE 蓝色51 BALANCE 平衡52 BAND MODE 波段控制模式53 BAND OUT 波段输出54 BASIC 基本(型)55 BASS 低音;副低音56 BB;BC;BCF;B - CO; 蓝枪截止点;显像管暗平衡蓝枪调整57 BCT;BCUT;BCUT OFF;B-58 CUTOFF59 BCW 亮度控制范围60 BD;BDR;B-DRIE;BDR; 蓝激励;显像管亮平衡蓝激励调整61 BDRY62 BEL;BELL;BELLFO;BELL FILTER SECAM钟型滤波器BG B.G伴音制式设置64 BG;B - GAIN 蓝激励;显像管亮平衡蓝激励调整65 BH 童锁66 BK 时钟67 BKP 消隐图像;消隐关断图像;消隐关断时的图像数据68 BL 平衡69 BALCK STR;BLACKSTRECH 黑电平扩展70 BLACK STRETCH POINT 黑电平扩展点71 BLK SW 消隐开关72 BLOCK 组件73 BLU;BLUE 蓝;蓝背景;蓝背景ON/OFF74 BLUE BACK MODE 蓝背景模式75 BLUE GAIN 蓝激励;显像管亮平衡蓝激励调整76 BOW 弓形77 BR 亮度;副亮度78 BR ABL TH 亮度ABL阀值;ABL起控点调整79 BRAND 商标;厂标显示80 BRC 蓝枪截止点;显像管暗平衡蓝枪调整81 BRI 亮度;副亮度82 BRI ABL TH 亮度ABL阀值;ABL起控点调整+J3z:b g:aB83 BRI CE 亮度中心调值84 BRI MA;BRI MI 亮度最大(最小)值85 BRIGHT; BRIGHT-NESS 亮度;副亮度86 BRT 亮度;框亮度数据(索尼)87 BRT ABL 亮度ABL(控制量)88 BRTC 副亮度中间值;亮度调整中心数据89 BRTN 最小亮度;副亮度最小值90 BRTS 亮度调整中心数据校正;副亮度校正91 BRTX 副亮度最大值92 BT 亮度93 BTSC BTSC制立体声94 BUS 总线95 BUS CONT OK 总线控制正常96 BUS LINE OK 总线正常97 BUS OFF 总线关断98 B-Y BLACK OFFSET B-Y信号黑偏移量99 C.BLK 色度信号消隐100 CANCEL 清除101 C-B 显像管暗平衡蓝色调整102 CFO 色度陷波器fo调整103 C-G 显像管暗平衡绿色调整104 CHINESE OSD 中文屏显105 CHINESE TUNER 中国制式高频头106 SUB R-CUTOFF 在彩色降噪接通时的红枪截止点校正107 SUB SHARP；SUB-SHARTNESS 副锐度108 SUB TINT 副色调109 SUB-OLUME 副音量110 SUPER WIDE GEOMETRY 超宽屏幕几何失真111 SURROUND 环绕声112 S4 4.43A(视频)副清晰度(中心值)113 SX4 4.43副清晰度最大值114 SY；SYS；SYSTEM 制式;多制式系统115 SYN；SYNC 同步;合成器116 TC 梯形失真117 TCC 色调控制中心118 T-COLOR BAR 彩条信号119 TCW 色调控制范围120 TEB 文本显示亮度121 TEC 文本显示对比度122 TELETEXT 图文电视123 TEST PATTERN 测试图124 TEST SIGNAL 测试信号125 TEXT CONTRAST 文本对比度126 TEXT.H;TEXT. 屏显水平(垂直)位置127 TEXT/MIX 文本/混合G/R128 TINT 色调129 TINTC 色调中心值130 TLT 倾斜失真(梯形失真)131 TMN；TMX 色调控制最小(最大)值132 TN 高频头133 TNTC 副色调中间值134 TNTN；TNTX 副色调最小(最大)值135 TONE 音调136 TRAP 陷波137 TPC；TR；TRAP；TRP 梯形失真138 TRAPEZIUM；TRAPEZOID 梯形失真139 TRE；TREBLE 高音140 TSC 图文对比度141 TUNER 调谐器;高频头142 T SYSTEMS 电视制式143 TXCN；TXCX 屏显对比度最小(最大)值144 TXH 屏显水平位置145 TXP；TXPIC 图文图像(对比度)146 TXT 文本;图文;屏显147 TYPE 类型148 UCBOW 上部偏中弓形失真149 UCC 对比度控制中心150 UCP 上角枕形失真151 UCW 单色控制范围152 UHF ONLY Y/N 可选择一路UHF接收获全接收0 153 ULN 上部场线性154 UNKNOWN 不能确定155 UP 上156 UTILT；UTL 上部倾斜失真(梯形失真)157 U UHF/HF158 UG 用户可变y校正159 UYB；UYBOW 垂直上角弓形失真160 AMPLITUDE 场幅161 CENTERING 场中心162 COMP 场补偿163 FREQUENCY 场频164 LIN；LNEARITY 场线性165 OUT PHASE50 50Hz场中心(场输出相位)166 POSI 场中心167 SC；S-CORRECTION 场S校正168 SHIFT 场中心169 SIZE 场幅170 25；50 音量调整20%(50%)位置音量数据值171 60 60Hz场中心调节;60Hz场幅(飞利浦)172 A；-A 场幅度;垂直孔阑补偿173 AD 视频输出幅度174 AG 对角失真(平行四边形失真)175 alue 数值176 AM；-AMPL；-AMPLITUDE 场幅177 -ANG 场对角形失真178 AP 场幅179 AW 垂直孔阑白色180 -BIAS 场偏置181 BW 场消隐宽度控制182 CD MD EXT 视频时的CD(视频/色度/扫描)模式183 CD MD TEXT 图文时的CD(视频/色度/扫描)模式184 CD MD T T时的CD(视频/色度/扫描)模式185 -CENTER 场中心186 CO 压控振荡器;38MHz中频振荡187 COMP 亮度变化引起的场幅失真校正188 -COMPENSATION 场补偿189 -CORRECT 垂直校正;场线性校正190 CP 垂直补偿;光栅亮度变化时,场幅校正设置191 CX 压控晶体振荡器自由振荡频率192 ENH 梳状滤波器垂直加强(轮廓校正)193 ER；ERSION 版本;类型194 ERT LINEARITY 场线性调整195 FQ；FR 场频196 H 场幅197 ID 视频;图像检波;视频识别模式198 -ID SW 视频识别开关199 IDEO 视频;视频输入设定(设定为3个)200 IDEO H.CEN 行相位;行中心201 IDEO LEEL 视频电平202 IF SYS中频设定203 L;-L 伴音限制;场线性204 LB 场线性校正205 LIN;-LIN;-LINEAR;LN 场线性206 CHROMA GAIN 色度增益207 CHROMA TRAP FO 色度信号陷波频率208 CHROMA TRAP Q 色度信号陷波Q值209 CLC 彩色控制中心;色度控制中心210 CLOCK 时钟211 CMN;CMX 色度控制最小(最大)值212 CNP;CNR 光栅角部校正失真213 CNR GAIN 彩色降噪增益214 CNT 对比度215 CNT CE 对比度中心值216 CNT MA;CNT MI 对比度最大(最小)值217 CNTC 对比度调整中间值;副对比度中间值218 CNTN;CNTX (副)对比度最小(最大)值219 CO443 PAL彩色(色度)中心220 COINCIDENTDET LEEL 符合检测电平221 COL MA 彩色(色度)最大值222 COLC N制副色度中间值;色度调整中间值223 COLN 副色度最小值224 COLOR 彩色;色度225 COLOR LIMIT LEEL 色度限制电平226 COLOR LIMIT SW 色度限制切换227 COLOUR 彩色228 COLP PAL制色度中间值;PAL副色度中心值229 COLS SECAM色度中间值;SECAM副色度中间值230 COLX 副色度最大值231 COMB 梳状滤波器232 COMMUNICATION 通讯233 CONNECTION 连接234 CON;CONT;CONTRAST 对比度;副对比度235 COOL 冷;白平衡冷色调236 COR;CORINC 核化(降噪);核化降噪峰值237 CORPN;CP;C-P;CR 四角枕形失真238 C-R 显像管暗平衡红色调整239 CRH;CRL 设定字符高(低)240 CROSS HATCH 格子信号241 CSD 字符的显示位置242 CSW 彩色开关243 S-SYSTEM 彩色制式244 CT 对比度;色度陷波(索尼)245 CUT-OFF 截止;显像管截止点调整(暗平衡调整)246 C 屏显垂直位置;C/YC(复合视频信号/YC信号)选择247 DATA 数据248 DATE 日期249 D-B 显像管亮平衡蓝色调整250 DC GREEN PAL 绿枪截止(显像管暗平衡)调整251 DC RED PAL 红枪截止(显像管暗平衡)调整252 DC TRAIN RATE 直流补偿程度253 DEFECT MODULE 产生故障的电路组件254 DEGAU 消磁;消磁功能接通/断开255 DELTA COOL 偏冷色(白平衡)256 DELTA COOL BLUE(GREEN RED) 冷色调白平衡蓝(绿\红)数据257 DELTA WARM 偏暖色白平衡258 DELTA WARM BLUE(GREEN RED) 暖色调白平衡蓝(绿\红)数据259 DEMP FO 去加重频率260 DIAGNOSE 故障自检(代码)261 DID 消磁关闭262 DIGI OSD;DIGITAL OSD 数字OSD(屏显)设定263 DIGITAL SCAN 数字扫描264 DISPLAY 显示;屏显语言选择265 DK D/K伴音制式设置266 DL;DLT;DLY 延迟控制;延时267 DPC 枕形失真校正(东芝);动态图像ON/OFF(索尼)268 DPCS 50Hz/60Hz校正269 DPI;D-PIC 动态图像270 D-R 显像管亮平衡红色调整271 DRG SW 以红枪或绿枪为准(DRGSW用于转换显像管红绿枪,按遥控器a) 电平增/减键在R、G（红、枪）之间转变）272 DR CNT 激励控制273 DSHFT 直流电平移（水平静会聚微调）274 DT 延时275 DT BW 黑白延时276 DM M（速度调制）静噪失效277 EAST/WEST CORNER 光栅四角调整278 EAST/WEST PARABOLA 光栅左右枕形失真279 EAST/WEST TOP COMPENSATION 光栅顶部补偿280 EAST/WEST TRAPEZIUM 光栅梯形失真281 EEPROM 电可檫可编程存储器282 EFFECT 效果283 EHH;EH 高压对光栅行幅（场幅）的影响284 ENGLISH ONLY 仅有英文285 EQ+DOLBY 均衡器+杜比286 EQUALIZER 均衡器287 ER;ERR;ERRORS 故障;错误;故障自检代码288 ERC 误差计数;故障计数289 EURO A 欧洲标准A输入290 EG 场保护启动291 EOL 外接信号预置音量292 EW 光栅左右枕形失真$]293 EW-CORNER 光栅左右角部失真294 EW-PARABO;EW-PARABOLA 光栅左右枕形失真295 F TRAP 陷波微调296 FAC 工厂297 FBP BL SW 行逆程脉冲消隐开关298 F-BW 强制黑白切换299 FEATURE-BOX 特色电路组件300 FGP FM伴音(BG、I、DK制）预置音量301 FILT;FILTER;FLT 滤波器302 FM 调频模拟伴音303 FM GAIN 调频伴音增益304 FM LEEL 调频伴音电平305 FMA 调频伴音衰减电平306 FORCED COLOUR 强制彩色307 FRAME 桢;框308 FRU、FR、FRY U(、Y）信号桢309 FSW 强制开关310 FU 福字设定（康佳）311 FUNCTIONAL TEST 功能测试312 FOL FM伴音音量预刻度313 G 绿；显像管亮平衡绿色调整314 G BIAS；G CUT OFF；G_ 显像管暗平衡绿色调整315 G DRIE；G DRIE GAIN 绿色激励（显像管亮平衡绿色调整）316 GAM；GAMMA Y校正317 GATE PULSE 选通脉冲318 GB；GC；GCF；GCO；GCT；GCUT；GCUT OFF绿色截止点；显像管暗平衡绿色调整319 GD；GDR；GDR 绿激励；显像管亮平衡绿色调整320 GENERAL 一般性的（调整）321 GEOMETRIC；GEOMETRY 光栅几何失真322 GG；G-GAIN 绿增益；显像管亮平衡绿色调整323 GLOBAL 全球；全球立体声324 GRC 绿色截止点；显像管暗平衡绿色调整325 GREEN 绿326 GREEN GAIN 绿增益；显像管亮平衡绿色调整327 H AFC 行AFC（增益）328 H AMPLITUDE 行幅329 H BLANK L；H BLK L 行左消隐；左黑边调整330 H BLANK R；H BLK R 行右消隐；右黑边调整331 H BLK PHASE50 50Hz行消隐相位332 H CENTER 50 50Hz行中心333 H FREQ 行频334 H PHASE；H PHASE SHIFT 航向位；行中心281 EEPROM 电可檫可编程存储器282 EFFECT 效果283 EHH;EH 高压对光栅行幅（场幅）的影响284 ENGLISH ONLY 仅有英文285 EQ+DOLBY 均衡器+杜比286 EQUALIZER 均衡器287 ER;ERR;ERRORS 故障;错误;故障自检代码288 ERC 误差计数;故障计数289 EURO A 欧洲标准A输入290 EG 场保护启动291 EOL 外接信号预置音量292 EW 光栅左右枕形失真293 EW-CORNER 光栅左右角部失真294 EW-PARABO;EW-PARABOLA 光栅左右枕形失真h295 F TRAP 陷波微调296 FAC 工厂297 FBP BL SW 行逆程脉冲消隐开关298 F-BW 强制黑白切换299 FEATURE-BOX 特色电路组件300 FGP FM伴音(BG、I、DK制）预置音量301 FILT;FILTER;FLT 滤波器302 FM 调频模拟伴音303 FM GAIN 调频伴音增益304 FM LEEL 调频伴音电平305 FMA 调频伴音衰减电平306 FORCED COLOUR 强制彩色307 FRAME 桢;框308 FRU、FR、FRY U(、Y）信号桢309 FSW 强制开关310 FU 福字设定（康佳）311 FUNCTIONAL TEST 功能测试312 FOL FM伴音音量预刻度313 G 绿；显像管亮平衡绿色调整314 G BIAS；G CUT OFF；G_ 显像管暗平衡绿色调整315 G DRIE；G DRIE GAIN 绿色激励（显像管亮平衡绿色调整）316 GAM；GAMMA Y校正317 GATE PULSE 选通脉冲318 GB；GC；GCF；GCO；GCT；GCUT；GCUT OFF绿色截止点；显像管暗平衡绿色调整319 GD；GDR；GDR 绿激励；显像管亮平衡绿色调整320 GENERAL 一般性的（调整）321 GEOMETRIC；GEOMETRY 光栅几何失真322 GG；G-GAIN 绿增益；显像管亮平衡绿色调整323 GLOBAL 全球；全球立体声324 GRC 绿色截止点；显像管暗平衡绿色调整325 GREEN 绿326 GREEN GAIN 绿增益；显像管亮平衡绿色调整327 H AFC 行AFC（增益）328 H AMPLITUDE 行幅329 H BLANK L；H BLK L 行左消隐；左黑边调整330 H BLANK R；H BLK R 行右消隐；右黑边调331 H BLK PHASE50 50Hz行消隐相位332 H CENTER 50 50Hz行中心333 H FREQ 行频334 H PHASE；H PHASE SHIFT 航向位；行中心281 EEPROM 电可檫可编程存储器282 EFFECT 效果283 EHH;EH 高压对光栅行幅（场幅）的影响284 ENGLISH ONLY 仅有英文285 EQ+DOLBY 均衡器+杜比286 EQUALIZER 均衡器287 ER;ERR;ERRORS 故障;错误;故障自检代码288 ERC 误差计数;故障计数289 EURO A 欧洲标准A输入290 EG 场保护启动291 EOL 外接信号预置音量292 EW 光栅左右枕形失真293 EW-CORNER 光栅左右角部失真294 EW-PARABO;EW-PARABOLA 光栅左右枕形失真295 F TRAP 陷波微调296 FAC 工厂297 FBP BL SW 行逆程脉冲消隐开关298 F-BW 强制黑白切换299 FEATURE-BOX 特色电路组件300 FGP FM伴音(BG、I、DK制）预置音量301 FILT;FILTER;FLT 滤波器302 FM 调频模拟伴音303 FM GAIN 调频伴音增益304 FM LEEL 调频伴音电平305 FMA 调频伴音衰减电平306 FORCED COLOUR 强制彩色307 FRAME 桢;框308 FRU、FR、FRY U(、Y）信号桢309 FSW 强制开关310 FU 福字设定（康佳）311 FUNCTIONAL TEST 功能测试312 FOL FM伴音音量预刻度313 G 绿；显像管亮平衡绿色调整314 G BIAS；G CUT OFF；G_ 显像管暗平衡绿色调整315 G DRIE；G DRIE GAIN 绿色激励（显像管亮平衡绿色调整）316 GAM；GAMMA Y校正317 GATE PULSE 选通脉冲318 GB；GC；GCF；GCO；GCT；GCUT；GCUT OFF绿色截止点；显像管暗平衡绿色调整319 GD；GDR；GDR 绿激励；显像管亮平衡绿色调整320 GENERAL 一般性的（调整）321 GEOMETRIC；GEOMETRY 光栅几何失真322 GG；G-GAIN 绿增益；显像管亮平衡绿色调整323 GLOBAL 全球；全球立体声324 GRC 绿色截止点；显像管暗平衡绿色调整325 GREEN 绿326 GREEN GAIN 绿增益；显像管亮平衡绿色调整327 H AFC 行AFC（增益）328 H AMPLITUDE 行幅329 H BLANK L；H BLK L 行左消隐；左黑边调整330 H BLANK R；H BLK R 行右消隐；右黑边调整331 H BLK PHASE50 50Hz行消隐相位332 H CENTER 50 50Hz行中心333 H FREQ 行频334 H PHASE；H PHASE SHIFT 航向位；行中心335 H POSITION 行中心；（字符）水平位置336 H SHIFT 行中心337 H AMP H.AMP(行幅)338 HAFC 行AFC;AFC中心数据339 HALF TONE SW 半色调增益选择340 HBL；HBR 水平消隐左(右)宽度341 HBS 行消隐宽度ON/OFF342 HC 四角失真(飞利浦)343 HC；H-C；H-CENTER 行中心344 HCO 高压跟踪模式345 H-COMPENSATION 行补偿346 H-CORNER 行边角失真;角部枕形失真347 H-CORRECT 水平校正348 HCP 水平补偿;光栅屏幕亮度变化时,行幅校正设置349 HD 行中心(飞利浦)350 H-FRE 行频351 HI BLUE 显像管亮平衡蓝色调整352 HI GAIN高增益;增强接受设定(康佳)353 HI GREEN 显像管亮平衡绿色调整354 HIT高度;场幅355 HITS 60Hz场扫描场幅校正数据;50/60Hz场幅差异356 HOLD 保持357 HOR 水平;行;画中画左右对称(海信)358 HORIZONTAL POS50 50Hz场频行中心359 HOTEL 旅馆模式360 HOTEL CHANNEL 旅馆频道361 HOUT CLOCK SW 行输出时钟切换362 HP；H-PARAB 水平枕形失真;左右枕形失真363 H-PHA；H-PHASE 行相位;水平中心364 HPOS；H-POS；HPS 水平位置;行中心365 HR 屏显水平位置366 HS 旅馆模式(飞利浦)367 H-S；HSF；HSH；H-SHIFT 水平位置;行中心368 HSIZE；HSZ 行幅369 HT；HTILT；HTLHTR；H-TRAP；HTRP 几何失真;水平倾斜失真(梯形失真) 370 HTR；H-TRAP；HTRP 几何失真;水平倾斜失真(梯形失真)371 HH；H 高压变动引起的行幅(场幅)变化补偿372 HW；H-W；H-WIDTH 行幅373 I I伴音制式设置374 IF-FRE 中频频率375 IR-PLL 中频锁相环376 IGR IGR立体声;西德制式立体声377 INDEX 索引378 INTC 色调调整中心数据379 ITL 隔行扫描380 JSW 跳跃ON/OFF开关381 KARAOKE 卡拉OK382 KEY 梯形失真校正383 KEYS 60Hz梯形失真校正384 LA 音频电平调整385 LAN；LANG 语言;屏显语言设定386 LANG/LOGO 语言/标志387 LANGUAGE 语言;菜单文字设定388 LBK 左消隐宽度389 LCB；LCBOW 下部偏中弓形失真390 LCP 下角枕形失真391 LEFT 左;画中画靠左边位置(海信)392 LE 电平393 LIM 限幅;RGB限幅ON/OFF(索尼)394 LIN 线性;场线性395 LINE WIDTH 行宽396 LLN 下部场线性397 LO BLUE；LO GREEN 暗平衡蓝色(绿色)调整398 LT1 亮度信号瞬态改善(LTI)方式1399 LTILT；LTL 下部倾斜失真(梯形失真)400 LUM LINEAR 亮度信号线性401 LYB；LYBOW 垂直下角弓形失真402 M M伴音制式设置403 M00 模式数据(M表示模式数据,数字表示第几个模式数据)404 MAIN MENU 主菜单405 M-DSP 主屏幕显示位置水平方向406 LIS 60Hz场线性407 M 速度调制;M(速度调制)电平;M(速度调制)ON/OFF;伴音静音408 M0 视频模式0;CD(视频/色度/扫描)模式0409 MC 距屏幕顶1/4~3/4区域进行线性调整;垂直S校正;垂直积分补偿410 MH M(速度调整)限幅器(高)411 ML M(速度调整)限幅器(低)412 OCAL CUT 消声413 OF 场关断414 OL 音量415 OL32 音量32值设定416 OLS SCART接口音量417 OLUME-CON 音量控制418 OM 音量输出增益419 P;POS;POSITION;PS 场中心420 S 场S校正(飞利浦)421 S;-S 场中心422 -S.CORR;SC;SCO;SCOR 场S校正423 SC;-SCROLL 垂直卷动(索尼\三星) -^4C:J424 S-CORRECTION 场S校正425 SD 场扫描关闭,进入水平一条亮线状态426 SF;SH;SHFT;SHIFT 场中心427 SL;-SLOPE 场线性;场线性对称点428 SM50 场同步范围开关(场频50Hz时)429 SW 视频静噪开关430 SZ 场幅431 X 场放大432 ZW 垂直变焦433 WARM (白平衡)暖色调434 WD 窗口选择435 WDS 窗口选择436 W-H 加权437 WHITE DRIE 显像管亮平衡调整;白平衡激励调整438 WHITE PEAK LIMIT 峰白限制439 WHITE TONE 白色调;白平衡色温440 WID;WIDE 宽度;行幅441 WIDE PICTURE-MUTE 图像消隐开关442 WIDE P-MUTE START 图像静噪开始443 WIDE P-MUTE STOP 图像静噪停止444 WIDE -BLK START 场消隐开始445 WIDE -BLK STOP 场消隐停止446 WIDE -BLK SW 场消隐宽度开关447 WIDS 60Hz行幅度448 WIP 划变449 WOOFER 低音扬声器450 WRP 写入位置451 WSP 划变速度452 XBS BASS 重低音453 XTL 晶振454 XOL 外接预置音量455 Y 亮度信号456 Y SUB 副对比度457 Y SUB CONTRAST 亮度信号副对比度458 Y BLK 亮度信号消隐459 Y-BOW 场弓形失真460 YC-AJ YC调整461 Y-CI DELAY Y-CI(亮度/色度改善)延时462 Y-DELAY;YDL 亮度信号延迟463 Y-DL SW PAL NTSC PAL/NTSC亮度延迟464 YFI亮度信号滤波器调整465 YNR 亮度信号降噪466 ZOOM 变焦467 ZSW 变焦开关。
优派 N2050w电视 说明书
Widescreen enjoyment.N2050w20" NEXTVISION®WIDESCREEN LCD TVWITH CLEARPICTURE ™ELECTRONICS>Experience wide-screen HDTV*Enjoy widescreen, high-definition TV with true 1366x768 resolution and XtremeView ®angles for a higher quality image at virtually any angle.>Stunning TV , vivid graphics, sharp textUltra-high brightness of 500 nits (typ) and a high contrast ratio of 1000:1 (typ) bring you rich, saturated color images and crisp text.>Advanced ClearPicture ™image processingIntegrated motion adaptive progressive scan, 3-D comb filter and 3:2 pull down give you a larger, clearer picture. Low level contrast enhancement brings clarity to darker images.>Connections for all your multimedia componentsMultiple inputs provide easy connection of video accessories. Also included is an integrated TV tuner offering full picture-in-picture (PIP) capability.>Powerful high-fidelity audioIt’s all accomplished by an ultra-high fidelity 10-watt (SRS) audio system that completes the entertaiment experience.>Clear, fast-paced presentations Fast 8ms video response time keeps your presentations and video crisp and clear.ONE-STOP SOLUTION FOR DESKTOPINFORMATION AND TV ENTERAINMENTViewSonic’s N2050w 20" widescreen LCD TV is versatile in entertainment and desktop environments and can be enjoyed in small spaces like the bedroom, kitchen, or even your RV . ClearPicture ™electronics enhance screen performance to deliver superior pictures while the sleek design and 10-watt high-quality sound system give you that theater feel. Guaranteed to turn heads, the progressive scan and 3-D comb filter boost COLOR AND CONTRAST TO HIGHER LEVELS OF PRECISE DETAIL. HDCP (high-definitioncontent protection) capability ensures long-term compatibility with evolving technology. For your multimedia enjoyment choose the N2050w by ViewSonic ®.Single control universal remote for all entertainment peripherals.LCDType20" color TFT active matrix, wide LCDDisplay Area17.5" horizontal x 9.8" vertical; 20.1" diagonal Optimum Resolution 1366x768Contrast Ratio 1000:1 (typ)Viewing Angles 176°horizontal, 176°vertical Response Time 8ms gray-to-gray (avg)Light Source Long life, 50,000 hrs. (typ)Brightness 500 cd/m2 (typ)Aspect Ratio 16:9Glass Surface Anti-reflective coatINPUTPC RGB analog (75 ohms, 0.7 Vp-p)TV TV/cable, composite (RCA), component YPbPr/YCbCr, S-video Audio3.5mm mini stereo audio in/out and RCA (left/right) audio in RGB Frequency F h : 30~64kHz, F v : 60~75Hz Sync H/V separated (TTL)Tuner NTSC AUDIO OUPUT Speakers 2x5-wattCOMPATIBILITY PC Compatible from VGA up to 1280x768 non-interlaced Mac ®**Power Mac™ G3/G4/G5 up to 1280x768INPUT SIGNAL TV/Video Comp.480i, 480p, 720p, 1080i CONNECTOR Analog 15-pin mini D-sub (VGA)Power 3-pin plugPOWER VoltageAC 100–240V (universal), 47–63Hz Consumption 100W (typ)CONTROLSBasicPower, enter, channel +/-, volume +/-, menu, source OnView ® (PC Mode)Video adjust, auto adjust, contrast, brightness, H. position,V . position, H. size, fine tune, SRS, language, bass, treble, volume, PIP , position, source, audio select, clock, color temperature (Video Mode)Picture (contrast, brightness, color, tint, sharpness, black level, color temperature), sound (volume, balance, bass, treble, SRS), audio select, source (TV , AV , S-video, YCbCr, YPbPr, VGA),parental control (caption, PIN password, TV ratings, MPAA movie ratings, V-chip temporary disable), PIP , position, language, reset (TV Mode)MTS, TV/CATV , auto scan, set channel, channel delete, label, favorite, fine tune OPERATING Temperature 32–104°F (0–40°C)CONDITIONS Humidity 10–85% (non-condensing)DIMENSIONS Physical (mm)546mm x 461mm x 162mm (W x H x D)Physical (in.)21.5" x 18.1" x 6.4"WEIGHTNet 17.6 lb. (8.0 kg)Gross23.1 lb. (10.5 kg)REGULATIONSUL, cUL, FCC, NOM, CBPACKAGE CONTENTS LCD TV display, power cable(s), remote control with batteries, VGA cable, RCA A/V cable, Quick Start Guide, User Guide WARRANTYOne-year limited warranty on parts and backlightN2050w20" NEXTVISION ®WIDESCREEN LCD TV WITH CLEARPICTURE ™ELECTRONICSFor more product information, visit us on the web at ViewSonic Corporation’s QMS & EMS have been registered to ISO 9001 & ISO 14001, respectively, by the British Standards Institution.ViewSonic Corporation • 381 Brea Canyon Road, Walnut, CA 91789Customer Service and Technical Support: (800) 688-6688 • Sales: (888) 881-8781 • SalesInfo@ • *HDTV cable or satellite provider and set-top box required. **Adapter may be required. Analog adapter available from ViewSonic. Specifications subject to change without notice. Selection, offers and programs may vary by country; see your ViewSonic representative for complete details. Corporate names, trademarks stated herein are the property of their respective companies. Copyright © 2006 ViewSonic Corporation. All rights reserved. [12815-00B-02/06] N2050w-1Rear connectors:– TV in– Component video in – S-video– Audio out R/L – Audio in R/L – PC input。
HM5000_sam
1
请在使用耳机前先阅读本手册，并妥善保存以供日后参考。本说明书中使用的 图片仅用于插图目的。真实产品可能有所不同。
版权信息 版权所有 © 2011 Samsung Electronics 本用户手册受国际版权法的保护。 事先未经 Samsung Electronics 的书面许可，不得以任何形式或方式（电子或机 械）复制、传播、翻译或传输本用户手册中的任何内容，包括影印、录制或存 储在任何信息存储和检索系统中。 商标 • SAMSUNG 和 SAMSUNG 标识是 Samsung Electronics 的注册商标。 • Bluetooth® 是 Bluetooth SIG, Inc. 的全球注册商标。有关蓝牙的详细信息， 请访问 。 其他所有商标和版权均为各自所有者所有。
20规格项目规格和说明蓝牙版本30所支持的设定耳机设定免提设定工作区域最大33英尺10待机时间最长200小时通话时间最长小时充电时间约为21产品中有毒有害物质或元素名称及其含量项目有毒有害物质或元素多溴联苯pbbpbde印刷电路板组件表示该有毒有害物质在该部件所有均质材料中的含量均在sjt113632006标准规定的限量要求以下
10
2 3 4
启动手机的蓝牙功能并搜索耳机（请参阅手机的用户手册）。
简体中文
从手机找到的设备列表中选择耳机 (HM5000)。 若系统提示，则输入蓝牙 PIN 码 0000（4 个零），从而将耳机配对并连接 到手机。
您的耳机支持简易配对功能，不需要通过 PIN 码就可与手机配对。仅当手 机与蓝牙版本 2.1 或更高版本兼容时此功能才可用。
断开耳机连接
断开耳机连接，或使用手机上的蓝牙功能表从配对列表中除去该设备。
重新连接耳机
若耳机断开与配对手机的连接： • 按下耳机上的通话按钮，或使用手机上的蓝牙功能表。 您的耳机将在每次开启时尝试自动重新连接。部分手机不支持此功能。 若多点功能已启动，则耳机将尝试重新连接最近连接的两部手机。
Murata Power Solutions DCA5-20PC Series dc Ammeter
DCA5-20PC-2-DC4 -RL-C DCA5-20PC-6-DC4-RL-CDCA5-20PC-1-DC4-RLCDCA5-20PC-1-DC4-RL-CDCA5-20PC-1-DC1-RL-CMurata Power Solutions’ new DCA5-20PC Series dc ammeters are specifi cally designed to dis-play the output of all popular 50mV and 100mV dc-shunts. 25 input ranges provide for precisionmeasurement of dc currents from 1.000A to 2000A. With the exception of an external shunt, the unit is 100% self-contained – no calibration or user-supplied components are required. Available LED-display colors include brilliant blue, bright green, and standard red. Three power supply options accommodate all popular dc-supply voltages from 5V to 75Vdc, making these ammeters perfect for automotive, industrial, telecom, and marine applications!DCA5-20PC Series ammeters are housed in 1.38” x 0.88” (35mm x 22mm) rugged pack-ages that feature a large, 0.37”/9.4mm high, LED display. However, display visibility is not com-promised in any way: the display can be easily read at distances up to 15 feet (5 meters). All input and power supply connections are made by way of two screw-style terminal blocks. For added fl exibility, computer-style jumpers are provided for range-specifi c decimal point assign-ments. And, to ensure trouble free installation, all models include reverse-polarity protected power supply inputs.Two input confi gurations are offered: grounded shunt (“low-side”), 5-40V-powered, red, green or blue LED models for cost-sensitive applications, and 8-36V isolated-supply models that accept high-side or fl oating shunts. Isolated-supply models are also available in a choice of red, green, or blue LEDs. Since many dc ammeters are used in battery backup applications, power consumption for 8-36V models is typically 1 Watt, and 75mW for 5-40V models.Miniature size, wide supply inputs, and no-hassles installation make DCA5-20PC Series ammeters the ideal choice for all your 50 and 100mV shunt ammeter-applications.Figure 1. DCA5-20PC Series Simplifi ed SchematicEXTERNALFEATURES⏹Scales and displays the output of 5A to 2000A, 50mV & 100mV shunts ⏹Completely self-contained – no additional components required ⏹Wide power supply inputs: 5 to 40Vdc for 12V/24V/28V applications ⏹48V option for telecom supplies⏹Isolated-supply models for high-side shunts ⏹Large, easy-to-read LED display with 0.37” (9.4mm) high digits ⏹Available in red, blue or green LED displays ⏹Subminiature 1.38” x 0.88” package with screw-style terminal blocks ⏹Factory calibrated to ±0.1% accuracy; Reverse-polarity protection ⏹Over 50 models available ⏹Digital upgrade for analog metersFor full details go to /rohsDCA5-20PC Series50mV & 100mV Input, LED-Display, Subminiature DC Ammeters➀ A full-scale input voltage of 50.00mV is used to calibrate all models for their designated measurement range. The ammeter’s rear calibration potentiometer compensates for full-scale input variations up to ±1% (49.5 to 50.5mV). Measuring positive and negative currents (bipolar operation): In applications where both positive and negative currents must be measured, Murata Power Solu-tions recommends using ‘-DC4’ 8-36V isolated supply models. Negative current fl ow is denoted by the illumination of the display’s negative (–) sign; the absence of a negative sign implies positive current fl ow. Contact MPS if you have any questions regarding bipolar operation of DCA5-20PC ammeters.➁ On non-isolated ‘-DC1’ models, continuous application of single-ended ±400mV inputs will not damage the ammeter. Single-ended inputs are defi ned as those whose TB1-1 (–IN) potential is within ±0.1V of the potential on TB2-2 (-V). For all models, the application of short-duration (5 seconds max.) ±1V inputs will not damage the ammeter.➂ Breakdown (isolation) voltage applies only to ‘-DC4’ isolated-power models. Breakdown voltage is tested with TB1-1 tied to TB1-2 (–IN shorted to +IN) and TB2-1 tied to TB2-2 (+V shorted to -V). 500Vdc is then applied between the two shorted terminal-block pairs; the max. allowable leakage current is 5uA.➃ Zero reading is measured with TB1-1 (–IN) shorted to TB1-2 (+IN).➄ Power supply currents noted are measured with the 50mV shunt input (TB1) at zero volts (display reads “000”) and one decimal point enabled.➅ Each model’s full-scale display reading with a 50.0mV input is designated by the fi rst X in the DCA5-20PC-X-XXX model number structure. Decimal point selection (DP1, DP2, DP3, or none) is performed by the user to suit desired amperage range. Input ranges -1, -2, -3, -4, -7, -8 and -9 can accommodate 100mV shunts. For these ranges, the indicated 50mV reading is doubled when a 100mV input is applied.Performance/Functional Specifi cationsTypical at T A = +25°C, unless otherwise noted.Accessories:DMS-20-CP Panel Cutout Punch A DMS-BZL4-C bezel assembly with sealing gasket is supplied with each ammeter.Shunt Model RatingUse with 3020-01097-0 5A/50mV DCA5-20PC-13020-01107-0 10A/100mV DCA5-20PC-13020-01098-0 20A/50mV DCA5-20PC-63020-01096-0 50A/50mV DCA5-20PC-13020-01099-0 100A/50mV DCA5-20PC-23020-01108-0 100A/100mV DCA5-20PC-13020-01100-0 150A/50mV DCA5-20PC-53020-01101-0 200A/50mV DCA5-20PC-63020-01102-0 300A/50mV DCA5-20PC-33020-01103-0 500A/50mV DCA5-20PC-13020-01104-0 800A/50mV DCA5-20PC-103020-01105-0 1000A/50mV DCA5-20PC-23020-01106-0 1200A/50mVDCA5-20PC-11*With respective decimal point user enabled. See technical note 7.See /dpm-availability for model-specifi c availability.DCA5-20PC Series50mV & 100mV Input, LED-Display, Subminiature DC AmmetersDCA5-20PC-X-DC1-XXTECHNICAL NOTESFigure 2. Low-Side Shunt Connections for "-DC1"5-40Vdc Non-Isolated Supply ModelsTo ensure safe and reliable operation, DCA5-20PC dc ammeters must only be installed and serviced by qualifi ed technical personnel. DCammeter applications can expose a user to potentially lethal currents and voltages. Power and signal connections must be made with all associ-ated power sources de-energized. Contact Murata Power Solutions if you have any questions regarding the installation or operation of any of our digital instruments.1. Calibration: DCA5-20PC ammeters are designed to operate with 50mV and 100mV dc shunts whose rated accuracy is ±0.25%, or better. The output of less accurate shunts may fall outside the ammeter’s ±1% calibra-tion adjustment range. Under normal indoor operating conditions, periodic recalibration of DCA5-20PC ammeters is not necessary. The calibration potentiometer, located on the back of the ammeter, is a ¾ turn type; do not force its adjustment screw past the two end stops.If user calibration is deemed necessary, it must be performed by qualifi ed personnel. Calibration is performed by applying a precision 50.00mVdc or 100mVdc (model specifi c, see ordering guide) signal to TB1, observing correct polarity. Then, using an insulated slotted tool, adjust the calibration potentiometer until the correct display reading is achieved. Contact MPS if additional information is required regarding calibration or setup of DCA5-20PC ammeters.2. Wiring and Fusing: Power supply (TB2) and input (TB1) wiring must be rated for the electrical and environmental conditions under which the ammeters will be operated. They must also comply with any regulatory or application-mandated requirements pertaining to the user’s installation. Con-nections to DCA5-20PC ammeters must be made with all power sources de-energized. Refer to the Functional Specifi cations section for TB1 and TB2 wire gauge information.DCA5-20PC ammeters’ shunt (TB1) and power supply inputs (TB2) are not internally fused. Therefore, the supply wires connected to the meter and the load should be fused according to the maximum current rating (or lower) of the wire gauge used, in accordance with applicable regulatory codes. Insulation should be stripped to within +/-10% of the stated dimensions. All wires must be inserted into the terminal block openings such that the screw terminal does not pinch any insulation. TB2 is to be used solely for power-ing the meter’s internal circuitry; it must not be used to supply current to an external load or auxiliary device.3. Terminal Block Torque Ratings: It is important to tighten TB1’s and TB2’s screw-terminals to their rated torque specifi cations of 3.6 pound-inches (0.4Nm). Proper tightening will minimize losses and ensure reliable operation.4. High-Side versus Low-Side Shunts: Incorrect shunt connections are one of the most common problems encountered when applying digitaldc-ammeters. Incorrect shunt connections can cause permanent damage to the ammeter and/or its associated equipment.Low-Side Shunts: Applications that employ a single power supply to power both the load and the ammeter, and the external shunt is located in the negative side of the supply (commonly referred to as “low side” or “grounded shunt”) should use ‘-DC1’ non-isolated power DCA5-20PC Series ammeters. Figures 2, 3, and 4 depict typical low-side shunt connections.High-Side Shunts: ‘-DC4’ isolated-power ammeters must be used in all applications that employ a single power supply to power both the load and the ammeter and the shunt is located in the high side (positive terminal) of the supply. Figures 5 and 6 depict typical high-side shunt connections. As shown in Figure 6, isolated-power models can also be used in applicationsFigure 3. Low-Side Shunt Connections for "-DC1" Models Modifi ed for36-75Vdc Non-Isolated Power (See Technical Note 5)where one supply powers the ammeter and a second supply powers the load, but the two supply grounds cannot be tied together. ‘-DC4’ isolated-supply models include a built-in dc/dc converter to provide a minimum of 500Vdc isolation between the shunt (TB1) and power supply inputs (TB2).5. Operation With 36 to 75Vdc Power: As shipped, all ‘-DC1’ models’ rated operating supply range is +5 to +40Vdc. However, ‘-DC1’ models can be user confi gured for 36 to 75Vdc operation by removing (opening) jumper J3. Please note that this user modifi cation can only be performed on ‘-DC1 power models. Also, all ‘-DC1’ models – including those that have been modifi ed for 36-75Vdc operation – can only be connected in low-side, grounded-shunt applications. See Figure 3 for detailed wiring information.DCA5-20PC Series50mV & 100mV Input, LED-Display, Subminiature DC AmmetersAPPLICATIONSAny reconfi guration of J3 must be made prior to connecting the power supply and shunt to the ammeter.6. Replacing Analog Panel Meters: DCA5-20PC ammeters can be used as replacements for analog panel meters that are driven by50 or 100mV shunts, if a suitable dc voltage is available for powering the ammeter. In retrofi t applications, it is extremely important to determine the shunt’s electrical confi guration (i.e., high or low side). If any doubt exists as to the shunt’s location, use only ‘-DC4’ isolated-supply models. Rewiring must be performed with all power sources de-energized.Figure 5. High-Side Shunt Connections for "-DC4"8-36Vdc Isolated-Power ModelsFigure 4. Typical Low-Side Shunt Connections for "-DC1" ModelsMeasuring a Battery’s Charge/Discharge CurrentFigure 6. Using "-DC4" Isolated-Power Models to Maintain IsolationBetween Two Power SuppliesFigure 7. Decimal Point Selection Using J2 and J1(Applies to All Models)7. Decimal Point Selection: As shown in the Ordering Information guide, DCA5-20PC ammeters are multiple input-range devices. For example, with a 50mV input, DCA5-20PC-1-DC1 models can be confi gured to display “5.00”, “50.0, or “500” Amps by simply removing or relocating decimal-point-selector jumper J2 (see Figure 7). Decimal points serve as placeholders only; they have no affect on displayed accuracy or resolution. If jumper J2 is not available, solder gaps SG1, SG2, or SG3 can be used to select DP1 (“1.XXX”), DP2 (“1X.XX”), or DP3 (“1XX.X”), respectively.DCA5-20PC Series50mV & 100mV Input, LED-Display, Subminiature DC AmmetersAPPLICATIONSPANEL INSTALLATIONStep 1. Step 2. Step 3. Step 4.8. Operation With 100mV Shunts: Many DCA5-20PC Series ammeters can also operate with 100mV shunts. This is due to the fact that when they are driven by a 100mV input, the display readings are double those of a 50mV input. However, a 50mV shunt cannot be used in a 100mV application because its maximum current rating will be exceeded.For our customer’s convenience, Murata Power Solutions offers a series of 50mV and 100mV chassis-mount dc shunts that can be used with DCA5-20PC ammeters. Part numbers for accessory shunts can be found in the Ordering Information section. A data sheet describing these shunts is available at .Table 1 indicates the obtainable readings of the seven DCA5-20PC models that can be operated with 100mV shunts. Be sure to enable the correct decimal point (see decimal point selection instructions).9. Noisy Power Supplies: Some power supplies contain high-frequency switching devices that may conduct and/or radiate signifi cant noise onto the low-level 50/100mV shunt signal. Even though the DCA5-20PC incorporates built-in fi ltering at its shunt input, some portion of this noise may be amplifi ed and subsequently measured by the DCA5-All connections and modifi cations must be made after the ammeter is securely attached to the panel, with all load and supply voltages de-energized (off).The installed wire-positions should be such that minimal forces are applied to TB1, TB2, and the ammeter itself. In high-vibration environments, the use of wiring strain-reliefs is recommended.To insure a secure panel-mount installation, MPS recommends using the DMS-BZL4-C (with sealing gasket) bezel assembly supplied with each20PC’s sensitive circuitry. The amplifi ed noise introduces errors that are particularly noticeable at zero load current (i.e., the ammeter may not display a relatively steady “000” reading).Connecting an external, unpolarized capacitor across TB1’s “+” and “–” inputs, and/or across the shunt’s 50mV output terminals, can help reduce noise-related display errors. In certain situations, the use of twisted pair or shield wiring may be required. As a general rule, avoid using excessively long leads between the ammeter and the shunt.Figure 8. Panel Installationammeter. See the Mechanical Specifi cations section for detailed panel cutout and ammeter dimensions.Following the four-step sequence shown in Figure 8 below, being careful not to apply excessive force or twisting motions, insert the ammeter into the panel opening. When using the DMS-BZL4-C’s sealing gasket, make sure it is positioned between the ammeter’s fl ange and the panel’s front surface. Be sure to use and securely tighten all four screws supplied with the bezel assembly.Model100mV Shunt ReadingsDCA5-20PC-1 10.00A/100.0A/1000A DCA5-20PC-2 1.999A/19.99A/199.9A/1999A DCA5-20PC-3 60.0A/600A DCA5-20PC-4 150.0A/1500A DCA5-20PC-7 50.0A/500A DCA5-20PC-8800ADCA5-20PC-9 1200ATable 1. 100mV Shunt Readings **With respective decimal point enabledDCA5-20PC Series50mV & 100mV Input, LED-Display, Subminiature DC AmmetersDMS-BZL4 BEZELRECOMMENDED DRILL AND PANEL CUTOUT DIMENSIONS0.093 (2.362) DIAMETER (4 REQUIRED)ONLY WHEN USING SUPPLIED BEZEL ASSEMBLYMECHANICAL DIMENSIONS: Inches (mm)TOLERANCES: 2 PL DEC ±0.02 (±0.51) 3 PL DEC ±0.010 (±0.254)MECHANICAL SPECIFICATIONSBEZEL INSTALLATION AND RECOMMENDED DRILL AND PANEL CUTOUTMurata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifi cations are subject to change without notice. © 2015 Murata Power Solutions, Inc.Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfi eld, MA 02048-1151 U.S.A.ISO 9001 and 14001 REGISTEREDThis product is subject to the following operating requirementsand the Life and Safety Critical Application Sales Policy: Refer to: /requirements/DCA5-20PC Series50mV & 100mV Input, LED-Display, Subminiature DC AmmetersDCA5-20PC-2-DC1 -RL-CDCA5-20PC-2-DC4 -RL-C DCA5-20PC-6-DC4-RL-CDCA5-20PC-1-DC4-RLCDCA5-20PC-1-DC4-RL-CDCA5-20PC-1-DC1-RL-C。
日本尼康Pronea 6i单反摄影机说明书
Program modes
..P*
Flexible Program
m
~
Print types
ntleimprint Language also can be selected
tIllla..
Print quantity
o
Self-timer
ME SET as you Ike on a single frame for creaIMty
Ctype ~
m Htype
Pronea 61 with IX-Nlkkor 24-70mm f/3 ,5-5,6
6
MEMORIES FOREVER
Pronea 61with IX-Nikkor 20-60mm f/3.S-S.6
I LOVE 'r'DV
- 1996
o I/SEP/ 96 2 ' OOPM #6 ID 123-456
QUICK RECALL
QR You can set your favorite combInatIonI of aI
1m the controls, then Instantly recaI up to three
sets of combinations. It's lice having three
a guide
a flash sync
It' ,hj....rIItI effectively with
back of the camera. the LCD panel can ............".
In the dark and provides comprehensive ~lrnAln 'I~V"
松下彩色电视机说明书
2.1.1. 漏电状况检查 （断电状态）
1. 拔下电源插头，在插头的两脚之间接一条跳线短路。 2. 打开电视机的电源开关。 3. 用一块欧姆表测电源插头与电视机上每一个金属暴露点之
间的电阻值 （此电阻为绝缘电阻，最好用兆欧表在较高的 电压下测试），正常情况下应为无穷大。若形成回路有漏电 现象时此值约为几十兆欧。
5.2.1. B+ 电压调整
信号 飞利浦测试
图象性质 标准图象
调整点 VR821
监测点 用数字表来测 B+
调整点 135V±0.2V
5.2.2. SCREEN 电压调整
整机预热 15 分后，再调试。
信号 八级灰度
调整点 FBT SCREEN
电位器
进入方法 工厂设定模式下按 “静
音”键
监测点 屏幕
监测结果 显示 OK
高压 :
29KV( 束电流为 0 时 )
显像管：
可见图像对角线最小尺寸
（整数）大于或等于 68cm
音频输出功率：
22W(11W+11W) 最大
20W(10W+10W)(7%THD)
尺寸 ( 高 x 宽 x 厚 )：
592mmX750mmX530mm
重量：
43kg
提供附件：
遥控器 1 个
R6 “(AA)5 号电池” 2 节
调整完成后按显示键退出，机器将自动保存所调整的设置。
6
TC-29FC20G
5.2. 调整步骤
TC-29FC20G 机芯是我司已开发的产品，它的主要特点是采用 PHILIPS 的最新超级单片 TDA9383 设计而成。（TDA9383 是将 MCU 与 TV PROCESSER 集成在一块 IC 里 , 内部带 E-W 校正。）
IMPRESSA J5 说明书
IMPRESSA J5 (JURA Typ 652)完全操作手册IMPRESSA J5 – 使用说明Impressa J5 – 使用说明目 录录安全操作须知 (4)咖啡机各部及配件说明 (6)正确使用 (8)安全提示 (8)IMPRESSA J5使用说明 (9)咖啡机型号 (9)符号含义 (9)欢迎加入IMPRESSA新世界 (10)1 IMPRESSA J5 – 咖啡与美的碰撞 (11)网站 (11)flash助手 (11)2 初次使用 (12)标准配备 (12)装机与连接电源 (12)加水 (12)加豆 (13)初次使用 (13)安装滤芯 (14)水硬度设置 (16)磨豆器调节 (16)开机 (17)关机 (18)3 认识您的咖啡机 (19)使用按键制做咖啡 (19)单次设置咖啡参数 (20)如何设置默认参数 (21)可设置的默认参数 (21)查看咖啡机使用与保养情况 (23)4 咖啡菜单 (25)5 单键制做咖啡 (31)专家提示 (31)意式浓缩咖啡 (31)2IMPRESSA J5 – 使用说明普通咖啡 (32)卡布基诺 (32)用咖啡粉做咖啡 (33)加热牛奶 (34)热水 (34)6 设置咖啡水量 (36)7 程序设置模式 (37)按键 (37)省电模式 (38)时间 (39)自动开机时间 (39)自动关机时间 (40)水量/时间表示 (41)语言 (41)8 保养 (43)保养提示 (43)咖啡机润湿 (43)更换滤芯 (44)咖啡机清洗 (45)咖啡机除垢 (47)润湿专业奶沫器 (49)清洗专业奶沫器 (49)分解专业奶沫器 (50)清理豆槽中的异物 (51)清洁豆槽 (51)水箱除垢 (52)9 滤芯- 咖啡品质的保证 (53)10 牛奶 (59)11 配件 (60)12 提示信息 (69)13 故障排除 (70)14 运输与回收处理 (71)15 技术参数 (72)16 核心技术产品 (73)17 授权维修中心 (76)3IMPRESSA J5 – 使用说明安全操作须知此安全操作须知适用于通过UL安全测试的咖啡机。
夏普M160M205零件手册中文_部分2
O第二纸盒给纸组件 (AR-M205)O第二纸盒给纸组件AR-RP6 MODEL目 录为确保安全性、可靠性，更换部品务必使用正规品。
指定的部品。
本手册仅供维修人员进行售后服务用，本手册内容如有更改，恕不通告。
SHARP CORPORATION部 品 手 册1234■外观给纸组件输送组件包装及附属品索引数码复合机选购件双面原稿输送器（RSPF）1外观1外观3输送组件3输送组件4包装及附属品4包装及附属品AR-D24单层纸盒AR-D25双层纸盒MODEL目 录为确保安全性、可靠性，更换部品务必使用正规品。
指定的部品。
本手册仅供维修人员进行售后服务用，本手册内容如有更改，恕不通告。
SHARP CORPORATION部 品 手 册123456■单层纸盒外观 （ＡＲ－Ｄ２４）单层纸盒给纸组件 （ＡＲ－Ｄ２４）双层纸盒外观 （ＡＲ－Ｄ２５）双层纸盒给纸组件 （ＡＲ－Ｄ２５）２５０页纸盒组件包装材料及附属品索引数码复合机选购件进纸组件1单层纸盒外观 (AR-D24)1单层纸盒外观 (AR-D24)2单层纸盒给纸组件 (AR-D24)2单层纸盒给纸组件 (AR-D24)4双层纸盒给纸组件 (AR-D25)4双层纸盒给纸组件 (AR-D25)5250页纸盒组件5250页纸盒组件6包装材料及附属品6包装材料及附属品■索引– 12 –COPYRIGHT © 2003 BY SHARP CORPORATION版权所有 翻印必究夏普办公设备（常熟）有限公司上海经营部中国上海浦东新金桥路２８号新金桥大厦１６０１室 ２００３年１０月中国印刷。