FDH27N50中文资料

合集下载

FDH50N50中文资料

GD S
TO-247
FDH Series
G DS
TO-3P
FDA Series
D
!
"
!"
G!
" "
!
S
Absolute Maximum Ratings
Symbol
VDSS ID
IDM VGSS EAS IAR EAR dv/dt PD
TJ, TSTG TL
Parameter
Drain-Source Voltage
UniFETTM
Description
These N-Channel enhancement mode power field effect transistors are produced using Fairchild’s proprietary, planar stripe, DMOS technology. This advanced technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulse in the avalanche and commutation mode. These devices are well suited for high efficient switched mode power supplies and active power factor correction.
--
On Characteristics
VGS(th)
Gate Threshold Voltage

FDA50N50中文资料

Thermal Characteristics
Symbol
RθJC RθCS RθJA
Parameter
Thermal Resistance, Junction-to-Case Thermal Resistance, Case-to-Sink Thermal Resistance, Junction-to-Ambient
VDD = 250V, ID = 48A RG = 25Ω
VDS = 400V, ID = 48A VGS = 10V
--
--
--
(Note 4, 5)
--
--
--
(Note 4, 5)
--
Drain-Source Diode Characteristics and Maximum Ratings
IS
102 Top :
V GS
15.0 V
10.0 V
8.0 V
7.0 V
6.5 V
6.0 V
101 Bottom : 5.5 V
I , Drain Current [A]
D
Drain-Source On-Resistance
[Ω],
R DS(ON)
100 10-1
10-1
Notes : 1. 250µs Pulse Test 2. T = 25oC!
2 FDH50N50 / FDA50N50 Rev. A

FDH50N50 / FDA50N50 500V N-Channel MOSFET
元器件交易网
Typical Performance Characteristics
Figure 1. On-Region Characteristics

IXFH24N50中文资料

© 1999 IXYS All rights reservedSymbol Test Conditions Maximum RatingsV DSS T J = 25°C to 150°C500V V DGR T J = 25°C to 150°C; R GS = 1 M Ω500V V GS Continuous ±20V V GSM Transient ±30V I D25T C = 25°C21N5021A 24N5024A 26N5026A I DM T C = 25°C, pulse width limited by T JM 21N5084A 24N5096A 26N50104A I ART C = 25°C21N5021A 24N5024A 26N5026A E AR T C = 25°C30mJ dv/dt I S ≤ I DM , di/dt ≤ 100 A/µs, V DD ≤ V DSS ,5V/n s T J ≤ 150°C, R G = 2 ΩP D T C = 25°C300W T J -55 ... +150°CT JM 150°C T stg -55 ... +150°C T L 1.6 mm (0.062 in.) from case for 10 s 300°CM d Mounting torque1.13/10 Nm/lb.in.WeightTO-204 = 18 g, TO-247 = 6 gSymbol Test ConditionsCharacteristic Values(T J = 25°C, unless otherwise specified)min.typ.max.V DSS V GS = 0 V, I D = 250 µA 500V V GS(th)V DS = V GS , I D = 4 mA 24V I GSS V GS = ±20 V DC , V DS = 0±100nA I DSSV DS = 0.8 • V DSS T J = 25°C 200µA V GS = 0 VT J = 125°C1mAN-Channel Enhancement ModeHigh dv/dt, Low t rr , HDMOS TM FamilyTO-247 AD (IXFH)TO-204 AE (IXFM)DGFeatures•International standard packages •Low R DS (on) HDMOS TM process•Rugged polysilicon gate cell structure •Unclamped Inductive Switching (UIS)rated•Low package inductance -easy to drive and to protect •Fast intrinsic RectifierApplications•DC-DC converters•Synchronous rectification •Battery chargers•Switched-mode and resonant-mode power supplies •DC choppers •AC motor control•Temperature and lighting controls •Low voltage relaysAdvantages•Easy to mount with 1 screw (TO-247)(isolated mounting screw hole)•High power surface mountable package •High power densityG = Gate, D = Drain,S = Source,TAB = Drain91525H (9/99)(TAB)V DSSI D25R DS(on)IXFH/IXFM21N50500 V 21 A 0.25 ΩIXFH/IXFM/IXFT24N50500 V 24 A 0.23 ΩIXFH/IXFT26N50500 V 26 A 0.20 Ω t rr ≤ 250 nsHiPerFETTMPower MOSFETsTO-268 (D3) Case Style(TAB)GS© 1999 IXYS All rights reservedFig. 1Output CharacteristicsFig. 2 Input AdmittanceFig. 5Drain Current vs.Fig. 6Temperature Dependence of Case TemperatureBreakdown and Threshold VoltageFig. 3R DS(on) vs. Drain CurrentFig. 4 Temperature Dependence of Drain to Source ResistanceT J - Degrees C-50-250255075100125150B V /V G (t h ) - N o r m a l i z e d0.50.60.70.80.91.01.11.2BV DSSV GS(th)T C - Degrees C -50-25255075100125150I D - A m p e r e s051015202530T J - Degrees C-50-250255075100125150R D S (o n ) - N o r m a l i z e d0.500.751.001.251.501.752.002.252.50I D - Amperes 05101520253035404550R D S (o n ) - N o r m a l i z e d0.91.01.11.21.31.41.51.6V GS - Volts012345678910I D - A m p e r e s5101520253035404550V DS - Volts 05101520253035I D - A m p e r e s5101520253035404550IXYS MOSFETS and IGBTs are covered by one or more of the following U.S. patents:4,835,5924,881,1065,017,5085,049,9615,187,1175,486,7154,850,0724,931,8445,034,7965,063,3075,237,4815,381,025IXYS reserves the right to change limits, test conditions, and dimensions.Fig.7Gate Charge Characteristic Curve Fig.8Forward Bias Safe Operating AreaFig.9Capacitance Curves Fig.10 Source Current vs. Source to Drain VoltageFig.11 Transient Thermal ImpedanceV DS - Volts110100I D - A m p e r e s0.1110100Gate Charge - nCoulombs255075100125150175200V G E - V o l t s012345678910V SD - Volt0.000.250.500.75 1.00 1.25 1.50I D - A m p e r e s05101520253035404550V DS - Volts 0510152025C a p a c i t a n c e - p F050010001500200025003000350040004500Time - Seconds0.000010.00010.0010.010.1110T h e r m a l R e s p o n s e - K /W0.0010.010.11C rssCoss50010µs 100µs1ms 10ms100msCissf = 1 Mhz V DS = 25V。

IXFH40N50Q2中文资料

© 2004 IXYS All rights reservedSymbol Test ConditionsMaximum RatingsV DSS T J = 25°C to 150°C500V V DGR T J = 25°C to 150°C; R GS = 1 M Ω500V V GS Continuous ±30V V GSM Transient±40V I D25T C = 25°C40A I DM T C = 25°C, pulse width limited by T JM 160A I AR T C = 25°C 40A E AR T C = 25°C 50mJ E AS T C = 25°C2.5 J dv/dt I S ≤ I DM , di/dt ≤ 100 A/µs, V DD ≤ V DSS ,20V/ns TJ ≤ 150°C, R G = 2 ΩP D T C = 25°C560W T J -55 ... +150°C T JM 150°C T stg -55 ... +150°C T L 1.6 mm (0.063 in) from case for 10 s 300°CM d Mounting torque 1.13/10Nm/lb.in.Weight6gHiPerFET TMPower MOSFETsN-Channel Enhancement Mode Avalanche Rated, Low Q gLow R g , High dv/dt, Low t rr FeatureszDouble metal process for low gate resistance zInternational standard packages zEpoxy meet UL 94 V-0, flammability classification zLow R DS (on), low Q g zAvalanche energy and current rated zFast intrinsic rectifier Applicationsz DC-DC convertersz Switched-mode and resonant-mode power supplies, >500kHz switching zDC choppers z Pulse generation zLaser driversAdvantagesz Easy to mount zSpace savingszHigh power densitySymbol Test ConditionsCharacteristic Values(T J = 25°C, unless otherwise specified)min.typ.max.V DSS V GS = 0 V, I D = 250 µA 500V V GS(th)V DS = V GS , I D = 4 mA 2.55.0V I GSS V GS = ±30 V DC , V DS = 0±200nA I DSS V DS = V DSS T J = 25°C 25µA V GS = 0 VT J = 125°C1mA R DS(on)V GS = 10 V, I D = 0.5 • I D250.16ΩPulse test, t ≤ 300 µs, duty cycle d ≤ 2 %DS98970C(04/04)TO-247 AD (IXFH)(TAB)IXFH40N50Q2V DSS = 500 VI D25= 40 A R DS(on)= 0.16 Ωt rr ≤ 250 nsPreliminary Data SheetIXYS reserves the right to change limits, test conditions, and dimensions.SymbolTest ConditionsCharacteristic Values(T= 25°C, unless otherwise specified)IXYS MOSFETs and IGBTs are covered by one or more 4,850,0724,931,8445,034,796 5,063,3075,237,4815,381,025 6,404,065B16,162,6656,534,3436,583,505 of the following U.S. patents:4,835,5924,881,1065,017,5085,049,9615,187,1175,486,7156,306,728B16,259,123B16,306,728B16,683,344© 2004 IXYS All rights reserved© 2004 IXYS All rights reserved。

FDP18N50中文资料

NOTES:1. Repetitive Rating: Pulse width limited by maximum junction temperature2. L = 5.2mH, I AS = 18A, V DD = 50V, R G = 25Ω, Starting T J = 25°C3. I SD ≤ 18A, di/dt ≤ 200A/µs, V DD ≤ BV DSS , Starting T J = 25°C4. Pulse Test: Pulse width ≤ 300µs, Duty Cycle ≤ 2%5. Essentially Independent of Operating Temperature Typical Characteristicsg FS Forward Transconductance V DS = 40V, I D = 9A (Note 4)--25--S Dynamic CharacteristicsC iss Input Capacitance V DS = 25V, V GS = 0V,f = 1.0MHz--22002860pF C oss Output Capacitance--330430pF C rss Reverse Transfer Capacitance --2540pF Switching Characteristicst d(on)Turn-On Delay Time V DD = 250V, I D = 18A R G = 25Ω(Note 4, 5)--55120ns t r Turn-On Rise Time --165340ns t d(off)Turn-Off Delay Time --95200ns t f Turn-Off Fall Time --90190ns Q g Total Gate Charge V DS = 400V, I D = 18A V GS = 10V(Note 4, 5)--4560nC Q gs Gate-Source Charge --12.5--nC Q gd Gate-Drain Charge--19--nCDrain-Source Diode Characteristics and Maximum RatingsI S Maximum Continuous Drain-Source Diode Forward Current ----18A I SM Maximum Pulsed Drain-Source Diode Forward Current ----72A V SD Drain-Source Diode Forward Voltage V GS = 0V, I S = 18A---- 1.4V t rr Reverse Recovery Time V GS = 0V, I S = 18AdI F /dt =100A/µs (Note 4)--500--ns Q rrReverse Recovery Charge-- 5.4--µCUnclamped Inductive Switching Test Circuit & WaveformsFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:1. Life support devices or systems are devices or systems which,(a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONSDefinition of TermsDatasheet Identification Product Status DefinitionAdvance Information Formative or InDesign This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.Preliminary First Production This datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to makechanges at any time without notice in order to improvedesign.No Identification Needed Full Production This datasheet contains final specifications. FairchildSemiconductor reserves the right to make changes atany time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a productthat has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.Rev. I20。

美极新风双向流控制板功能说明

美极双向流新风控制板A功能说明1、适用范围及认证要求1.1 本产品只供中国大陆范围内使用。

1.2 本产品包括主控显示板和电源板。

通用的控制方式为触摸按键、遥控器、WIFI+手机APP 或微信公众号来实现本机的控制。

1.3 网络适用环境: 本产品包含 WIFI 模块，使用2.4GHz 的频率符合中国无委会要求。

1.4 电源规格：165V～253VAC 50/60Hz 单相。

1.5 待机功耗：≤ 2W（主控显示板+电源板）。

1.6 工作环境温度：-10℃～50℃；工作环境湿度：0～90%。

2、功能简述本控制板适用于柜式，吊顶式，壁挂式式等新风净化设备。

包含有主控显示板、电源板。

支持触摸控制、红外遥控、远程 wifi 控制。

可接各类传感器和负载，包括：新风电机、回风电机、新风风阀、回风风阀（步进电机、交流风阀两种）、PM2.5 传感器、温湿度传感器、VOC、二氧化碳、负离子、紫外灯、电辅热（电辅热需注意国标标准）等。

3、显示屏概述3.1 LCD 显示屏；3.2 运行模式指示；3.3 CO2 值显示；3.4 PM2.5 值显示；3.5 温、湿度显示；3.6 风速档位指示；3.7 负离子、紫外灯、电辅热显示；3.8 触摸按键、红外遥控、WIFI 控制；3.9 故障显示；4、机器状态4.1 掉电状态：机器没有上电，不工作。

4.2 开机状态：机器处于正常运行状态，通过在触摸“开机”或遥控器按“开关”按键或通过WIFI 开机指令都可以使系统进入运行状态。

4.3 待机状态：通过触摸“开机”按键、遥控器按动“开关”按键或通过 WIFI 待机指令都可以使系统进入待机状态。

5、功能描述主控显示板有触摸按键 8 个，从左到右依次为开关键、模式键、风速键、睡眠键、定时键、辅热键、负离子键、紫外灯键。

5.1 系统上电5.1.1 系统上电后，LCD 显示屏全显 3 秒后关闭，蜂鸣器长鸣一声。

新风风阀和回风风阀初始化。

这时系统没有运行，属于待机状态。

耐腐蚀化工流程泵,耐蚀腐化工泵价格,三昌泵业

耐腐蚀化工流程泵耐腐蚀化工泵概述：DF型耐腐蚀化工泵为单吸、多级、节段式耐腐蚀离心泵，适用于输送不含固体颗粒的耐腐蚀液体。

输送介质温度为－20℃~105℃，允许进口压力为0.6MPa。

耐腐蚀化工泵参数范围：流量Q 2～336m3/s扬程H 84～666m耐腐蚀化工泵型号说明：DF25－50×5“DF”－表示单吸、多级、节段式耐腐蚀化工泵。

“25”－表示泵的流量(m3/h)。

“50”－表示泵单级扬程（m）。

“5”－表示级数。

耐腐蚀化工泵结构型式：DF型耐腐蚀化工泵为卧式安装。

除DF155-30型泵的入口方向为水平外，其余泵的吸入口垂直向上。

所有DF型泵的吐出方向垂直向上。

轴封一般采用填料密封，根据用户需要也可采用机械密封。

除DF85-67型泵采用滑动轴承稀油润滑，DF155-67型泵采用滚动轴承稀油润滑外，其余采用滚动轴承，油脂润滑。

泵轴向力除DF3-40Ⅱ型泵采用叶轮对称布置的方式来平衡外，其余均采用平衡盘机构来平衡。

耐腐蚀化工泵旋转方向：耐腐蚀化工泵的转向从原动机端看为顺时针旋转。

耐腐蚀化工泵主要零件材质：耐腐蚀化工泵的过流部件材质有铸钢和铸不锈钢两类，订货时应根据输送介质的名称、浓度、进口压力、使用温度、对材质的腐蚀程度，合理选用泵的材质、密封型式和泵的结构。

耐腐蚀化工泵成套范围：泵与电机、底座配套供应，可配公用底座或本身底座，厂方还提供附件（包括吐出锥管、闸阀、止回阀）和备件（包括叶轮、密封环、导叶套、平衡盘、轴套）。

参数型号流量Q扬程H转速n轴功率Pa配带电动机效率η必须汽蚀余量叶轮名义直径进出口径泵重功率型号m3/sL/s m r/minkw kw % m mm mm kgDF40Ⅱ×3 2340.560.831.11118.2114.6110.429805.65.867.5 Y132S2-211.516202.32.52.71804040135DF40Ⅱ×4 2340.560.831.11157.6152.8147.829807.57.8811 Y160M1-211.516202.32.52.71804040152DF40Ⅱ×5 2340.560.831.1119719118429809.49.71015 Y160M2-211.516202.32.52.71804040168DF40Ⅱ×6 2340.560.831.11236.4229.2220.8298011.311.71215 Y160M2-211.516202.32.52.71804040185DF40Ⅱ×7 2340.560.831.11275.8267.4257.6298013.213.61418.5Y160L-211.516202.32.52.71804040201DF40Ⅱ×8 2340.560.831.11315.2305.6294.4298015.115.51618.5Y160L-211.516202.32.52.71804040218DF40ⅡG×3 2340.560.831.11133.5130.512629806.16.46.711 Y160M1-21216.520.52.32.52.71804040135DF40ⅡG×4 2340.560.831.1117817416829808.18.68.911 Y160M1-21216.520.52.32.52.71804040152DF40ⅡG×5 2340.560.831.11222.5217.5210298010.210.711.215 Y160M2-21216.520.52.32.52.71804040168DF40ⅡG×6 2340.560.831.11267261252298012.212.813.418.5Y160L-21216.520.52.32.52.71804040185DF40ⅡG×7 2340.560.831.11311.5304.5294298014.21515.618.5Y160L-21216.520.52.32.52.71804040201DF40ⅡG×8 2340.560.831.11356348336298016.317.217.822 Y180M-21216.520.52.32.52.71804040218DF25-50×3 1525284.166.947.78150144141298016.719.621.530 Y200L1-236.650502.42.72.81968080270116参数流量扬程转速轴功配带电动机效必须叶轮进出口泵型号Q H n 率Pa功率型号率η汽蚀余量名义直径径重m3/sL/s m r/minkw kw % m mm mm kgDF25-50×4 1525284.166.947.78200192188298022.326.128.737 Y200L2-236.650502.42.72.81968080295DF25-50×5 1525284.166.947.78250240235298027.832.635.845 Y225M-236.650502.42.72.81968080315DF25-50×6 1525284.166.947.78300288282298033.439.24355 Y250M-236.650502.42.72.8196808034DF25-50×7 1525284.166.947.7835033632929803945.750.255 Y250M-236.650502.42.72.8196808036DF25-50×8 1525284.166.947.78400384376298044.652.357.475 Y280S-236.650502.42.72.81968080385DF25-50×9 1525284.166.947.78450432423298050.158.864.575 Y280S-236.650502.42.72.81968080405DF25-50×10 1525284.166.947.78500480470298055.765.371.790 Y280M-236.650502.42.72.8196808043DF25-50×11 1525284.166.947.78550528517298061.371.878.990 Y280M-236.650502.42.72.8196808045DF25-50×12 1525284.166.947.78600576564298066.978.48611Y315S-236.650502.42.72.81968080470DF46-50×3 2846507.7812.813.9166.5144138298025.430.131.937 Y200L2-25050592.52.832088080270DF46-50×4 2846507.7812.813.9222192184298033.940.142.545 Y225M-25050592.52.832088080295DF46-50×5 2846507.7812.813.9277.5240230298042.350.153.175 Y280S-25050592.52.832088080315DF46-50×6 2846507.7812.813.9333288276298050.860.163.775 Y280S-25050592.52.83208808034117参数型号流量Q扬程H转速n轴功率Pa配带电动机效率η必须汽蚀余量叶轮名义直径进出口径泵重功率型号m3/s L/s m r/minkw kw % m mm mmkgDF46-50×7 2846507.7812.813.9388.5336322298059.370.274.390 Y280M-25050592.52.83208808036DF46-50×8 2846507.7812.813.9444384368298067.780.284.990 Y280M-25050592.52.832088080385DF46-50×9 2846507.7812.813.9499.5432414298076.290.295.5110 Y315M1-25050592.52.832088080405DF46-50×10 2846507.7812.813.9555480460298084.7100.2106.2132 Y315M1-25050592.52.83208808043DF46-50×11 2846507.7812.813.9610528506298093.1110.3116.8132 Y315M1-25050592.52.83208808045DF46-50×12 2846507.7812.813.96665765522980101.6120.3127.4132 Y315M1-25050592.52.832088080475DF80-30×3 2540506.9411.113.994.579.561.5298011.713.514.418.5Y160L-2556458344.51628080165DF80-30×4 2540506.9411.113.912610682298015.61819.322 Y180M-2556458344.5162808018DF80-30×5 2540506.9411.113.9157.5132.5102.5298019.522.62430 Y200L1-2556458344.51628080195DF80-30×6 2540506.9411.113.9189159123298023.42728.937 Y200L2-2556458344.5162808021DF80-30×7 2540506.9411.113.9220.5185.5143.5298027.331.633.745 Y225M-2556458344.51628080225DF80-30×8 2540506.9411.113.9252212164298031.236.148.255 Y250M-2556458344.5162808024DF80-30×9 2540506.9411.113.9283.5238.5184.5298035.140.643.355 Y250M-2556458344.51628080255118参数型号流量Q扬程H转速n轴功率Pa配带电动机效率η必须汽蚀余量叶轮名义直径进出口径泵重功率型号m3/sL/s m r/minkw kw % m mm mmkgDF80-30×10 2540506.9411.113.931526520529803945.148.555 Y250M-2556458344.51628080270DF85-67×3 558510015.323.627.8210186169.5298061.769.575.990 Y280M-2516260.83.344.4235150150846DF85-67×4 558510015.323.627.8280248226298082.292.6101.211Y315S-2516260.83.344.4235150150964DF85-67×5 558510015.323.627.8350310282.52980102.8115.8126.616Y315M2-2516260.83.344.42351501501126DF85-67×6 558510015.323.627.84203723392980123.4138.9151.916Y315M2-2516260.83.344.42351501501434DF85-67×7 558510015.323.627.8490434395.52980143.9162.1177.222Y355-2516260.83.344.42351501501556DF85-67×8 558510015.323.627.85604964522980164.2185.220222Y355-2516260.83.344.4235150150184DF85-67×9 558510015.323.627.8630558508.52980185.5208.4227.825Y355-2516260.83.344.4235150150184DF155-67×3 9515518526.443.151.32281861652980101.7120.813616Y315L1-25865612.34.25.4238150150722DF155-67×4 9515518526.443.151.33042482202980135.6161181.4185Y315M-25865612.34.25.4238150150778DF155-67×5 9515518526.443.151.33803102752980169.5201.3226.725Y355M-25865612.34.25.4238150150834DF155-67×6 9515518526.443.151.34563723302980203.4241.6272.128Y315L-25865612.34.25.4238150150890DF155-67×7 9515518526.443.151.35324343852980237.3281.8317.9355Y315M-25865612.34.25.4238150150946119参数流量扬程转速轴功配带电动机效必须叶轮进泵重型号Q H n 率Pa功率型号率η汽蚀余量名义直径出口径m3/sL/s m r/minkw kw % m mm mmkgDF155-67×8 9515518526.443.151.36084964402980271.2322.1362.840Y355-25865612.34.25.4238150150946DF155-67×9 9515518526.443.151.36845584952980305.1362.4408.145Y400-25865612.34.55.42381501501058DF155-30×3 11915519033.143.152.898.192.184148043.150.458.175 Y280S-474777533.74.9305150150540DF155-30×4 11915519033.143.152.8130.8122.8112148057.467.277.490 Y280S-M-474777533.74.9305150150620DF155-30×5 11915519033.143.152.8163.5152.5140148071.88496.811Y315S-474777533.74.9305150150690DF155-30×6 11915519033.143.152.8196.2184.2168148086.1100.8116.2132Y315M1-474777533.74.9305150150770DF155-30×7 11915519033.143.152.8228.9214.91961480100.5117.6135.516Y315L1-474777533.74.9305150150850DF155-30×8 11915519033.143.152.8261.6245.62241480114.8134.4154.916Y315L1-474777533.74.9305150150930DF155-67×9 11915519033.143.152.8294.3276.32521480129.2151.2174.220Y355M-474777533.74.9305150150101DF155-30×10 11915519033.143.152.83273072801480143.5168.5193.620Y315S2-474777533.74.9305150150109DF280-43×3 16828033646.777.893.3141129114148093.6127.814116Y315M2-469777434.56.1360200200930DF280-43×4 16828033646.777.893.31881721521480124.8170.418822Y315M1-469777434.56.1360200200104DF280-43×5 16828033646.777.893.3235215190148015621323525Y315M2-469777434.56.13602002001151 20参数型号流量Q扬程H转速n轴功率Pa配带电动机效率η必须汽蚀余量叶轮名义直径进出口径泵重功率型号m3/sL/s m r/minkw kw % m mm mm kgDF280-43×6 16828033646.777.893.32822582281480187.2255.6282315 Y355l2-469777434.56.1360200200126DF280-43×7 16828033646.777.893.33293012661480218.4298.2329355 Y400-469777434.56.13602002001370DF280-43×8 16828033646.777.893.33763443041480249.6340.8376400 Y400-469777434.56.1360200200148DF280-43×9 16828033646.777.893.34233873421480280.8383.4423450 Y400-469777434.56.1360200200159。

IXFE80N50中文资料

© 2002 IXYS All rights reserved Symbol Test ConditionsCharacteristic Values(T J = 25°C, unless otherwise specified)min.typ.max.V DSS V GS = 0 V, I D = 3 mA 500V V GH(th)V DS = V GS , I D = 8 mA 24VI GSS V GS = ±20 V DC , V DS = 0±200nA I DSS V DS = V DSS T J = 25°C 100µA V GS = 0 V T J = 125°C2mA R DS(on)V GS = 10 V, I D = I T 55m ΩNote 2Symbol Test Conditions Maximum RatingsV DSS T J = 25°C to 150°C500V V DGR T J = 25°C to 150°C; R GS = 1 M Ω500V V GS Continuous ±20V V GSM Transient±30V I D25T C = 25°C, Chip capability 72A I DM T C = 25°C, Note 1320A I AR T C = 25°C 80A E AR T C = 25°C 64mJE AS T C = 25°C6J dv/dt I S ≤ I DM , di/dt ≤ 100 A/µs, V DD ≤ V DSS5V/ns T J ≤ 150°C, R G = 2 ΩP D T C = 25°C580W T J -40 ... +150°C T JM 150°C T stg -40 ... +150°C V ISOL 50/60 Hz, RMS t = 1 min 2500V~I ISOL ≤ 1 mAt = 1 s3000V~M d Mounting torque1.5/13Nm/lb.in.Terminal connection torque 1.5/13Nm/lb.in.Weight19gHiPerFET TMPower MOSFETs Single Die MOSFETN-Channel Enhancement Mode Avalanche Rated, High dv/dt, Low t rrDSG SIXFE 80N50V DSS = 500 V I D25= 72 A R DS(on)= 55 m ΩFeatures•Conforms to SOT-227B outline•Low R DS (on) HDMOS TM process•Rugged polysilicon gate cell structure•Unclamped Inductive Switching (UIS)rated•Low package inductance•Fast intrinsic RectifierApplications•DC-DC converters•Battery chargers•Switched-mode and resonant-modepower supplies •DC choppers•Temperature and lighting controlsAdvantages •Low cost•Easy to mount •Space savings •High power densityG = Gate D = DrainS = SourceEither Source terminal at miniBLOC can be used as Main or Kelvin Source98898A (5/02)Preliminary data sheetISOPLUS 227TM (IXFE)SGSDIXYS reserves the right to change limits, test conditions, and dimensions.IXYS MOSFETs and IGBTs are covered by one or more of the following U.S. patents:4,835,5924,881,1065,017,5085,049,9615,187,1175,486,7156,306,728B14,850,0724,931,8445,034,7965,063,3075,237,4815,381,025Notes: 1.Pulse width limited by T JM.2.Pulse test, t ≤ 300 ms, duty cycle d ≤ 2%.3.I T Test current: I T = 40 A。

欧姆朗特电子5-Turn精密潜入式潜入抗压电阻器说明书

Features■ Wirewound and Hybritron ® elements ■ High rotational life ■ Optional 0.15 % linearity ■ Optional A/R lug ■ RoHS compliant*■ Suitable for use under side load■ Designed for HMI and MMI applications ■ Dual gang option ■ Servo mount option*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.Speciﬁ cations are subject to change without notice.Customers should verify actual device performance in their speciﬁ c applications.Electrical Characteristics 1 Wi r ewound Element Hyb r it r on ® ElementStandard Resistance Range..................................................................500 to 50K ohms ....................................................1K to 10K ohmsTotal Resistance Tolerance ....................................................................±3 % .......................................................................±10 %Independent Linearity ............................................................................±0.25 % ..................................................................±0.25 %Independent Linearity (Maximum Practical) ..........................................±0.15 % ..................................................................±0.15 %Effective Electrical Angle .......................................................................1800 ° +10 °, -0 ° ....................................................1800 ° +10 °, -0 °Absolute Minimum Resistance/End Voltage ..........................................1 ohm or 0.1 % maximum ......................................0.4 % maximum (whichever is greater)Noise/Output Smoothness ....................................................................100 ohms maximum ...............................................0.15 % maximum Max. Wiper Current @ 5K ohms ...........................................................20 mA .....................................................................10 mA Dielectric Withstanding Voltage (MIL-STD-202, Method 301) Sea Level ...........................................................................................1,000 VAC minimum ..............................................1,000 VAC minimum Insulation Resistance (500 VDC) ..........................................................1,000 megohms minimum ......................................1,000 megohms minimum Resolution..............................................................................................See How to Order chart ........................................Essentially inﬁ nite Power Rating (Voltage Limited By Power Dissipation) +70 °C ................................................................................................1.5 watts .................................................................1.5 watts +125 °C ..............................................................................................0 watt ......................................................................0 wattEnvironmental Characteristics 1Operating Temperature Range Dynamic .............................................................................................-40 °C to +125 °C ...................................................-40 °C to +125 °C Static ..................................................................................................-55 °C to +125 °C ...................................................-55 °C to +125 °C Temperature Coefﬁ cient (Over Static Temperature Range) ..................±50 ppm/°C ............................................................±100 ppm/°C Temperature Cycling (5 Cycles Over Static Temperature Range) .........±2 % TR shift max. .................................................±4 % TR shift max.Vibration (15 Gs, 10 Hz to 2 kHz)Wiper Bounce ....................................................................................0.1 ms max. ............................................................0.1 ms max.Shock (100 Gs, 6 ms sawtooth)Wiper Bounce ....................................................................................0.1 ms max. ............................................................0.1 ms max.Load Life (1,000 hours @ 70 °C) ...........................................................±2 % TR shift max. .................................................±5 % TR shift max.Rotational LifeNo Load .............................................................................................1,000,000 shaft revolutions ...................................2,500,000 shaft revolutions Powered (MIL-PRF-12934)................................................................1,000,000 shaft revolutions ...................................2,500,000 shaft revolutions Moisture Resistance (Mil-Std-202, Method 103) ...................................±2 % TR shift max. .................................................±5 % TR shift max.IP Rating ................................................................................................IP 50 .......................................................................IP 50Mechanical Characteristics 1Mechanical Angle ...........................................................................................................................................................................................1800 ° +10 °, -0 °Backlash ....................................................................................................................................................................................................................1.0 ° max.Stop Strength.......................................................................................................................................................................................53 N-cm (75 oz-in.) min.TorqueStarting ........................................................................................................................................................................................0.5 N-cm (0.7 oz.-in.) max. Running .......................................................................................................................................................................................0.5 N-cm (0.7 oz.-in.) max. Clutch................................................................................................................................................................................1.0 to 4.2 N-cm (1.5 to 6.0 oz.-in.) Mounting ..........................................................................................................................................................................170-200 N-cm (15-18 in.-lb.) max.Shaft Runout T.I.R. .....................................................................................................................................................................................0.08 mm (0.003 in.)Lateral Runout T.I.R. ...................................................................................................................................................................................0.13 mm (0.005 in.)Shaft End Play T.I.R. ..................................................................................................................................................................................0.15 mm (0.006 in.)Shaft Radial Play T.I.R. ...............................................................................................................................................................................0.08 mm (0.003 in.)Pilot Diameter Runout T.I.R. .......................................................................................................................................................................0.08 mm (0.003 in.)Weight Single ....................................................................................................................................................................................................19 gm (0.67 oz.) typ. Dual .....................................................................................................................................................................................................35 gm. (1.23 oz.) typ.Shaft Side Load (Max. Allowable)Nickel Plated Brass Shaft w/Brass Bushing .................................................................................................................................................50 gmf (1.7 ozf) Stainless Steel Shaft w/Bronze Bushing ....................................................................................................................................................250 gmf (8.8 ozf)Terminals ..............................................................................................................................................................................................Gold-plated solder lugs Soldering Condition Manual Soldering ...........................................................96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire, 370 °C (700 °F) max. for 3 seconds Wave Soldering ...................................................................................96.5Sn/3.0Ag/0.5Cu solder with no-clean ﬂ ux, 260 °C (500 °F) max. for 5 seconds Wash processes .......................................................................................................................................................................................Not recommended Mounting Hardware .............................................................................................One lockwasher and one mounting nut is shipped with each potentiometer Recommended Panel Thickness (Bushing Mount) ..................................................................................................................2.46-3.81 mm (0.097-0.150 in.)Marking ...........................................................................................................................Manufacturer’s symbol, model number, product code and date code Standard Packaging ...........................................................................................................................................................................Plastic trays (5 pcs./tray)1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.For other options, please consult factory.*Ro H SC OM P L I A N TSpeciﬁ cations are subject to change without notice.Customers should verify actual device performance in their speciﬁ c applications.Product DimensionsSingle Gang, Bushing MountDual Gang, Bushing MountCLOCKWISE0.813(.032)DEEPTOLERANCES: EXCEPT WHERE NOTEDDECIMALS: .XX ± .XXX ± .XXXX ± DIMENSIONS:CLOCKWISE.50(.02).127(.005).0127(.0005)MM(IN)Shaft Dimension "A"6.34 +0/-0.022(0.2497 +0/-0.0009)6.00 +0/-0.022(0.2362 +0/-0.0009)6.34 +0/-0.007(0.2497 +0/-0.0003)6.00 +0/-0.007(0.2362 +0/-0.0003)6.34 +0/-0.007(0.2497 +0/-0.0003)6.00 +0/-0.007(0.2362 +0/-0.0003)Bushing SelectionCodeABCDGHBushing Type "B"3/8 " 32-UNEF- 2A THD.M9 X 0.75-8g 3/8 " 32-UNEF- 2A THD.M9 X 0.75-8g 3/8 " 32-UNEF- 2A THD.M9 X 0.75-8g Shaft Material Nickel Plated Brass Nickel Plated Brass Stainless Steel Stainless Steel Stainless Steel Stainless Steel Bushing Material Brass Brass Bronze Bronze Bronze BronzeSpeciﬁ cations are subject to change without notice.Customers should verify actual device performance in their speciﬁ c applications.Product DimensionsSingle Gang, Servo MountDual Gang, Servo MountTOLERANCES: EXCEPT WHERE NOTEDDECIMALS: .XX ± .XXX ± .XXXX ± DIMENSIONS:CLOCKWISE.50(.02).127(.005).0127(.0005)MM(IN)DIA.DIA.CLOCKWISE“Hybritron” is a registered trademark of Bourns, Inc. Speciﬁ cations are subject to change without notice.Customers should verify actual device performance in their speciﬁ c applications.Panel Thickness Dimensions(For Bushing Mount Only)1.60 +.08/-.03(.063 +.003/-.001)DIA.ANTI-ROTATION PINMM (INCHES)DIMENSIONS:Anti-rotation pin hole is shown at six o'clock position for reference only. The actual location is determined by the customer's application. Refer to the front view of the potentiometer to see the location of the optional A/R pin.Panel thickness and hole diameters arerecommended for best fit. However, customers may adjust the dimensions to suit their specific application.TOLERANCES: ±0.127(.005)How To OrderREV. 10/113548S -2A A -103/103ACode H S Description Hybritron®WirewoundELEMENT TYPE Code A B Description None 180 °ANTI-ROTATION LUG Code 3548Description 5-TurnMODEL DESIGNATOR Code 12Description Single Dual NO. OF SECTIONSCode Element Type Hybritron®Hybritron®Hybritron®Wirewound Wirewound Wirewound Wirewound Wirewound Wirewound Wirewound WirewoundResolution ———0.0690.0540.0430.040.0380.0290.0230.017RESISTANCE**Code A B Description 0.25 %0.15 %INDEPENDENT LINEARITY102 (1K ohms) 502 (5K ohms)103 (10K ohms)201 (200 ohms)501 (500 ohms)102 (1K ohms)202 (2K ohms)502 (5K ohms)103 (10K ohms)203 (20K ohms)503 (50K ohms)** For Single gang, use only first three digits.For Dual gang, use six digits separated by a "/".* Anti-rotation lug is not available for servo mount versions.*** Not available in dual gang version.Code A B C D G H Shaft FMS 13/16 "20.6 mm 13/16 "20.6 mm 13/16 "20.6 mm Shaft Material Nickel Plated Brass Nickel Plated Brass Stainless Steel Stainless Steel Stainless Steel Stainless Steel Shaft Dia.1/4 "6 mm 1/4 "6 mm 1/4 "6 mm Bushing Dia.3/8 "9 mm 3/8 "9 mm 3/8 "9 mmBushing MaterialBrass Brass Bronze Bronze Bronze BronzeSlip ClutchN/A N/A N/A N/A Yes***Yes***BUSHING MOUNTCode EShaft FMS 3/8 "Shaft Material Stainless SteelShaft Dia.1/8 "SERVO MOUNT。

IXTH30N50中文资料

© 2002 IXYS All rights reservedSymbol Test Conditions Maximum RatingsV D S S T J = 25°C to 150°C500V V DGR T J = 25°C to 150°C; R GS = 1 M Ω500VV GS Continuous ±20V V GSM Transient ±30V I D25T C = 25°C30A I DM T C = 25°C, pulse width limited by T JM 120A P D T C = 25°C360W T J -55 ... +150°C T JM 150°C T stg -55 ... +150°C T L 1.6 mm (0.063 in) from case for 10 s 300°CM d Mounting torque1.13/10Nm/lb.in.Weight6gTO-247 ADG = Gate, D = Drain,S = Source,TAB = DrainSymbol Test ConditionsCharacteristic Values(T J = 25°C, unless otherwise specified)min.typ.max.V D S S V GS = 0 V, I D = 5 mA500V BV DSS temperature coefficient .087%/k V GS(th)V DS = V GS , I D = 250 µA24V V GS(th) temperature coefficient -0.25%/k I GSS V GS = ±20 V DC , V DS = 0±100nA I DSS V DS = 0.8 • V DSS T J = 25°C 200µA V GS = 0 VT J = 125°C3mA R D S (o n )V GS = 10 V, I D = 0.5 • I D2530N500.17ΩPulse test, t ≤ 300 µs, duty cycle d ≤ 2 %FeatureszInternational standard package JEDEC TO-247 AD zLow R DS (on) HDMOS TM process zRugged polysilicon gate cell structure zFast switching timesApplicationszSwitch-mode and resonant-mode power supplies z Motor controlsz Uninterruptible Power Supplies (UPS)zDC choppersAdvantageszEasy to mount with 1 screw (TO-247)(isolated mounting screw hole)z Space savingszHigh power density94569-E (8/02)D (TAB)MegaMOS TM FETN-Channel Enhancement ModeIXTH 30N50V DSS = 500 V I D (cont)= 30 A R DS(on) = 0.17 0.17 ΩIXYS reserves the right to change limits, test conditions, and dimensions.IXYS MOSFETs and IGBTs are covered by one or more of the following U.S. patents:4,835,5924,881,1065,017,5085,049,9615,187,1175,486,7156,306,728B14,850,0724,931,8445,034,7965,063,3075,237,4815,381,025SymbolTest ConditionsCharacteristic Values(T= 25°C, unless otherwise specified)Source-Drain Diode Characteristic Values(T J = 25°C, unless otherwise specified)Symbol Test Conditions min.typ.max.I S V GS = 0 V30A I SM Repetitive; pulse width limited by T JM 120A V SD I F = I S , V GS = 0 V,1.5V Pulse test, t ≤ 300 µs, duty cycle d ≤ 2 %t rrI F = I S , -di/dt = 100 A/µs, V R = 100 V850ns。

爱达顿F-框型完整包装电路保护器FD3050LM04商品说明说明书

Eaton FD3050LM04Eaton Series C complete molded case circuit breaker, F-frame, FD, Fixed thermal, fixed magnetic trip, Three-pole, 50A, 600 Vac, 250 Vdc, 65 kAIC at 240 Vac, 35 kAIC at 480 Vac, Line/load, Three or four-pole imperial mounting base, 50/60 HzGeneral specificationsEaton Series C complete molded case circuit breakerFD3050LM047866790834753.38 in 6 in4.13 in 4.5 lb Eaton Selling Policy 25-000, one (1) year from the date of installation of the Product or eighteen (18) months from the date of shipment of the Product, whichever occurs first.UL Listed Product NameCatalog Number UPCProduct Length/Depth Product Height Product Width Product Weight WarrantyCertificationsSeries CThree or four-pole imperial mounting base35 kAIC at 480 Vac65 kAIC at 240 VacFFD50/60 HzComplete breakerLine and load600 Vac, 250 Vdc50 AFixed thermal, fixed magneticThree-pole Application of Multi-Wire Terminals for Molded Case Circuit BreakersUL listed 100%-rated molded case circuit breakersApplication of Tap Rules to Molded Case Breaker TerminalsCircuit breaker motor operators product aidPlug-in adapters for molded case circuit breakers product aidMulti-wire lugs product aidStrandAble terminals product aidPower metering and monitoring with Modbus RTU product aidCurrent limiting Series C molded case circuit breakers product aid MOEM MCCB Product Selection GuideMotor protection circuit breakers product aidBreaker service centersCounterfeit and Gray Market Awareness GuideMolded case circuit breakers catalogEaton's Volume 4—Circuit ProtectionTime Current Curves for Series C® F-Frame Circuit BreakersInstallation Instructions for EHD, EDB, EDS, ED, EDH, EDC, FDB, FD, HFD, FDC, HFDDC Circuit Breakers and Molded Case SwitchesCircuit Breakers ExplainedCircuit breakers explainedSeries C G-Frame molded case circuit breakers time current curves MOEM MCCB product selection guideEaton Specification Sheet - FD3050LM04Series C J-Frame molded case circuit breakers time current curves Series C F-Frame molded case circuit breakersSeriesMounting hardware Interrupt ratingFrameCircuit breaker type Frequency ratingCircuit breaker frame type TerminalsVoltage rating Amperage RatingTrip TypeNumber of poles Application notesBrochuresCatalogsDrawingsInstallation instructions MultimediaSpecifications and datasheetsEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia。

FDPF18N50中文资料

海林(QDF)系列电动蝶阀使用说明书

QDF系列电动蝶阀使用说明书产品概要QDF系列中线软密封电动蝶阀适用于中央空调系统或供热采暖系统中，能够实现浮点型、比例调节型（标准信号DC0(2)-10V 或4(0)-20mA）控制。

通过PLC、DDC、温控器等控制信号，对电动蝶阀的开度进行调节，以控制管道系统介质的流量，使电动蝶阀的开度始终保持在设定范围内，以满足管道系统中对流量、压力、温度的精确控制。

产品特点·外形美观、结构紧凑、安装方便，易于拆装及维修。

· 90度回转启闭迅速，调节性能好。

·具有精确的双蜗轮蜗杆机构，低噪声，高输出力矩。

·手-电动切换。

·内置干燥器，可防止水气冷凝。

·具有自动鉴别相序、端相、过热、过载保护。

·多功能显示窗口，显示内容丰富，用户可随时掌握·设备基本参数和运行状态。

·可实现远程操控。

·具有完备的堵转和振荡判定等故障检测功能。

·调节型可与开关型随意切换使用。

·安全可靠，能够通过AC1500V耐压检测，选用F 级绝缘电机，并内置热保护开关。

·启动和关闭次数6万次。

·IP67高标准防护等级。

执行器技术参数阀体技术参数注：蝶板材料默认为球墨铸铁（镀镍），如果需要不锈钢或者其它材料，订货时请注明。

对夹式电动蝶阀外形尺寸DN40~50 DN65~80DN100~DN150DN100~DN150DN200-DN350 DN400~DN500法兰电动蝶阀外形尺寸DN40~DN500对夹式蝶阀与执行器配置表（供参考）法兰式蝶阀与执行器配置表（供参考）注：配置表仅供参考，以实物配置为准。

Kv 值注: 1、Kv 值是阀门两端压差为100KPa 时的水流量（单位m ³/h ）。

（测试水温20℃）2、当阀门用作开、关使用时其额定流量系数按90℃开度时的Kv 值选取；当阀门用作调节使用时其额定流量系数按70℃开度时Kv 值选取。

FAIRCHILD FDH50N50 FDA50N50 数据手册

FDH50N50 / FDA50N50 500V N-Channel MOSFETG SDTO-247FDH Series查询FDA50N50供应商FDH50N50 / FDA50N50 500V N-Channel MOSFETPackage Marking and Ordering InformationElectrical Characteristics T C= 25°C unless otherwise notedNOTES:1. Repetitive Rating: Pulse width limited by maximum junction temperature2. L = 1.46mH, I AS = 48A, V DD = 50V, R G = 25Ω, Starting T J = 25°C3. I SD ≤ 48A, di/dt ≤ 200A/µs, V DD ≤ BV DSS , Starting T J = 25°C4. Pulse Test: Pulse width ≤ 300µs, Duty Cycle ≤ 2%5. Essentially Independent of Operating Temperature Typical CharacteristicsDevice MarkingDevicePackageReel SizeTape WidthQuantityFDH50N50FDH50N50TO-247--30FDA50N50FDA50N50TO-3P--30SymbolParameterConditionsMin.Typ.Max UnitsOff Characteristics BV DSS Drain-Source Breakdown Voltage V GS = 0V, I D = 250µA500----V ∆BV DSS / ∆T J Breakdown Voltage Temperature CoefficientI D = 250µA, Referenced to 25°C --0.5--V/°C I DSS Zero Gate Voltage Drain Current V DS = 500V, V GS = 0V V DS = 400V, T C = 125°C --------25250µA µA I GSSF Gate-Body Leakage Current, Forward V GS = 20V, V DS = 0V ----100nA I GSSR Gate-Body Leakage Current, Reverse V GS = -20V, V DS = 0V -----100nA On CharacteristicsV GS(th)Gate Threshold Voltage V DS = V GS , I D = 250µA 3.0-- 5.0V R DS(on)Static Drain-Source On-ResistanceV GS = 10V, I D = 24A --0.0890.105Ωg FS Forward Transconductance V DS = 40V, I D = 48A (Note 4)--20--S Dynamic CharacteristicsC iss Input Capacitance V DS = 25V, V GS = 0V,f = 1.0MHz--49796460pF C oss Output Capacitance--7601000pF C rss Reverse Transfer Capacitance --5065pF C oss Output CapacitanceV DS = 400V, V GS = 0V, f = 1.0MHz --161--pF C oss eff.Effective Output Capacitance V DS = 0V to 400V, V GS = 0V --342--pF Switching Characteristicst d(on)Turn-On Delay Time V DD = 250V, I D = 48A R G = 25Ω(Note 4, 5)--105220ns t r Turn-On Rise Time --360730ns t d(off)Turn-Off Delay Time --225460ns t f Turn-Off Fall Time --230470ns Q g Total Gate Charge V DS = 400V, I D = 48A V GS = 10V(Note 4, 5)--105137nC Q gs Gate-Source Charge --33--nC Q gdGate-Drain Charge--45--nCDrain-Source Diode Characteristics and Maximum Ratings I S Maximum Continuous Drain-Source Diode Forward Current ----48A I SM Maximum Pulsed Drain-Source Diode Forward Current ----192A V SD Drain-Source Diode Forward Voltage V GS = 0V, I S = 48A---- 1.4V t rr Reverse Recovery Time V GS = 0V, I S = 48AdI F /dt =100A/µs (Note 4)--580--ns Q rrReverse Recovery Charge--10--µCTRADEMARKSThe following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.FDH50N50 / FDA50N50 500V N-Channel MOSFETDISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:1. Life support devices or systems are devices or systems which,(a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling,can be reasonably expected to result in significant injury to the user.2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONS Definition of TermsDatasheet Identification Product Status DefinitionAdvance InformationFormative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.PreliminaryFirst ProductionThis datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.No Identification Needed Full ProductionThis datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.Obsolete Not In ProductionThis datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.FAST ®FASTr™FPS™FRFET™GlobalOptoisolator™GTO™HiSeC™I 2C™i-Lo ™ImpliedDisconnect™ISOPLANAR™LittleFET™MICROCOUPLER™MicroFET™MicroPak™MICROWIRE™MSX™MSXPro™OCX™OCXPro™OPTOLOGIC ®OPTOPLANAR™PACMAN™POP™Power247™PowerEdge™PowerSaver™PowerTrench ®QFET ®QS™QT Optoelectronics™Quiet Series™RapidConfigure™RapidConnect™µSerDes™SILENT SWITCHER ®SMART START™SPM™Stealth™SuperFET™SuperSOT™-3SuperSOT™-6SuperSOT™-8SyncFET™TinyLogic ®TINYOPTO™TruTranslation™UHC™UltraFET ®UniFET™VCX™A CEx™ActiveArray™Bottomless™CoolFET™CROSSVOLT ™DOME™EcoSPARK™E 2CMOS™EnSigna™FACT™FACT Quiet Series™Across the board. Around the world.™The Power Franchise ®Programmable Active Droop™。

FDP15N50中文资料

•175°C Rated Junction TemperatureAbsolute Maximum Ratings TC = 25o C unless otherwise notedThermal CharacteristicsSymbol Parameter Ratings Units V DSS Drain to Source Voltage500V V GS Gate to Source Voltage±30VI DDrain Current15A Continuous (T C = 25o C, V GS = 10V)Continuous (T C = 100o C, V GS = 10V) 11APulsed160A P DPower dissipationDerate above 25o C3002WW/o C T J, T STG Operating and Storage T emperature-55 to 175o C Soldering Temperature for 10 seconds300 (1.6mm from case)o CRθJC Thermal Resistance Junction to Case0.50o C/W RθJA Thermal Resistance Junction to Ambient (TO-247)40o C/W RθJA Thermal Resistance Junction to Ambient (TO-220, TO-263)62o C/WDGSDRAIN(FLANGE)Package SymbolDRAINSOURCEGATEDRAINSOURCEGATETO-263ABFDB SERIESGATESOURCEDRAIN(FLANGE)TO-220ABFDP SERIESTO-247FDH SERIESDRAIN(BOTTOM)Figure 3. Transfer CharacteristicsFigure 4. Normalized Drain To Source On Resistance vs Junction TemperatureFigure 5. Capacitance vs Drain To SourceVoltage Figure 6. Gate Charge Waveforms For ConstantGate Current01020304050603.03.54.0 4.55.0 5.56.0 6.5I D , D R A I N C U R R E N T (A )V GS , GATE TO SOURCE VOLTAGE (V) TJ = 25o CTJ = 175o C PULSE DURATION = 80µsDUTY CYCLE = 0.5% MAX VDD = 100V N O R M A L I Z E D O N R E S I S T A N C ETJ, JUNCTION TEMPERATURE (o C)00.51.01.52.02.53.5-50-250255075100150175PULSE DURATION = 80µsDUTY CYCLE = 0.5% MAXV GS = 10V, I D = 7.5A1253.01010010004000110100C , C A P A C I T A N C E (p F )V DS , DRAIN TO SOURCE VOLTAGE (V)C ISSC OSSC RSSV GS = 0V, f = 1MHz361215010203040V G S , G A T E T O S O U R C E V O L T A G E (V )Qg, GATE CHARGE (nC)I D = 15A 950250V400V100VFigure 9. Maximum Drain Current vs CaseTemperatureFigure 10. Unclamped Inductive SwitchingCapabilityFigure 11. Normalized Transient Thermal Impedance, Junction to CaseT C , CASE TEMPERATURE (o C)I D , D R A I N C U R R E N T (A )0481216255075100125175150110500.010.115010t AV , TIME IN AVALANCHE (ms)I A S , A V A L A N C H E C U R R E N T (A )STARTING T J = 25o CSTARTING T J = 150o Ct AV = (L)(I AS )/(1.3*RATED BV DSS - V DD )If R = 0If R ≠ 0t AV = (L/R)ln[(I AS *R)/(1.3*RATED BV DSS - V DD ) +1]t 1,RECTANGULAR PULSE DURATION (s)Z θJ C ,N O R M A L I Z E D T H E R M A L R E S P O N S E10010-510-310-210-110010110-4t 1t 2P DDUTY FACTOR, D = t 1 / t 2PEAK T J = (P D X Z θJC X R θJ C ) + T CSINGLE PULSE0.200.500.100.050.020.0110-110-2Rev. I3TRADEMARKSThe following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.DISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.LIFE SUPPORT POLICYFAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONS Definition of TermsACEx ™ActiveArray ™Bottomless ™CoolFET ™CROSSVOLT ™DOME ™EcoSPARK ™E2CMOS ™EnSigna ™FACT ™FACT Quiet Series ™FAST ®FASTr ™FRFET ™GlobalOptoisolator ™GTO ™HiSeC ™I 2C ™ImpliedDisconnect ™ISOPLANAR ™LittleFET ™MicroFET ™MicroPak ™MICROWIRE ™MSX ™MSXPro ™OCX ™OCXPro ™OPTOLOGIC ®OPTOPLANAR ™PACMAN ™POP ™Power247™PowerTrench ®QFET ®QS ™QT Optoelectronics ™Quiet Series ™RapidConfigure ™RapidConnect ™SILENT SWITCHER ®SMART START ™SPM ™Stealth ™SuperSOT ™-3SuperSOT ™-6SuperSOT ™-8SyncFET ™TinyLogic ®TruTranslation ™UHC ™UltraFET ®VCX ™Across the board. Around the world.™The Power Franchise ™Programmable Active Droop ™Datasheet Identification Product Status DefinitionAdvance InformationFormative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.PreliminaryFirst ProductionThis datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.No Identification Needed Full ProductionThis datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.Obsolete Not In ProductionThis datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.。

FPD20系列槽轮流量传感器产品说明书

FPD20 SeriesGear wheel flow sensor- 2 - M-5455/0315Table of contents page 0About this operating manual (4)1Device description (5)1.1Intended use (5)1.2Exclusion of liability (5)2Safety instructions (6)3Construction and function (8)4Installation and electrical connection (9)4.1Installation FPD20 (9)4.2Electrical connection (10)5Operation (11)6Problems and returns (11)7Maintenance and cleaning (12)7.1Maintenance (12)7.2Cleaning (12)7.2.1General cleaning (12)7.2.2Flushing the volume sensor (13)7.2.3Cleaning the FPD-23 (13)8Removing the device and disposal (14)9Technical data (15)9.1Characteristics FPD20 (15)9.2Pressure drop (16)9.3Dimensions (17)Copyright notice:The reproduction, distribution and utilization of this operating manual as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or designTechnical changes reserved - 3 -About this operating manual Series FPD20- 4 - M-5455/03150 About this operating manual• The operating manual is aimed at specialists and semi-skilled personnel.• Before each step, read through the relevant advice carefully and keep to the specified order.•Thoroughly read and understand the information in the section "Safety instructions".If you have any problems or questions, please contact your supplier or contact us directly at:One Omega Drive, P.O. Box 4047Stamford, CT 06907-0047 Tel: (203) 359-1660 e-mail:**************Hazard signs and other symbols used:DANGER! Risk of death due to electric current!This sign indicates dangers which could lead to serious health defects or to death.WARNING! / CAUTION! Risk of injury!This sign indicates dangers that cause personal injuries that can lead to health defects or cause considerable damage to property.CAUTION! Risk of injury in the case of excessive pressure!This sign indicates dangers which could arise from excessive pressure in a piece of equipment.CAUTION! Material damage!This sign indicates actions which could lead to possible damage to material or environmental damage.ADHERE TO OPERATING MANUAL! NOTICE!This symbol indicates important notices, tips or information. NO DOMESTIC WASTE!The device must not be disposed of together with domestic waste.Pay attention to and comply withinformation that is marked with this symbol.Follow the specified instructions and steps.Adhere to the given order.❑Check the specified points or notices.Reference to another section, document orsource. • Item.Series FPD20 For your notesTechnical changes reserved - 5 -1 Device descriptionThe FPD20 series from Omega are high-precision instruments for measuring volumetric flow and for dosing applications. They work on the positive displacement principle. Media used are oils and other viscous lubricating fluids.Measuring principle:The flowing medium sets the pair of precision gears proportionally to flow rate into rotation. A non-contact pick-up senses the wheel rotation.As every tooth produces a pulse, the sensor’s resolution is extremely high and even tiny volumes can be measured.The frequency produced is proportional to flow rate.The FPD-22 has a double channel-output signal with approx. a 90° phase offset. For standard applications the read out of one channel is sufficient. In case the flow direction should be determined, both channels are read. Can be used in:• Flow rate measurements • Consumption measurements •Dosing applicationsVersions and scope of delivery: • FPD-… Flow sensor + adapters •FPD-…-BSPP Only flow sensor1.1 Intended useThe FPD20 is only intended to be used for measuring volumetric flow and for dosing applications in machines or systems.WARNING! No safety component!The gear wheel flow sensors of the series FPD20 are not safety components in accordance with Directive 2006-42-EC (Machine Directive). Never use the FPD20 as a safety component.The operational safety of the device supplied is only guaranteed by intended use. The specified limits (♑ § 9 "Technical data") may under no circumstances be exceeded.CAUTION! Material damage!The flow sensor is not suitable for measuring water.Before installing the device, check that the wetted materials of the device are compatible with the media being used (♑ "Wetted components").1.2 Exclusion of liabilityWe accept no liability for any damage or malfunctions resulting from incorrect installation, inappropriate use of the device or failure to follow the instructions in this operating manual.For your notes Series FPD20- 6 - M-5455/03152Safety instructionsBefore you install the FPD20, read through this operating manual carefully. If theinstructions contained within it are not followed, in particular the safety guidelines, thiscould result in danger for people, the environment, and the device and the system it is connected to.The FPD20 correspond to the state-of-the-art technology. This concerns the accuracy, the operating mode and the safe operation of the device.In order to guarantee that the device operates safely, the operator must act competently andbe conscious of safety issues.Omega provides support for the use of its products either personally or via relevant literature. The customer verifies that our product is fit for purpose based on our technical information. The customer performs customer- and application-specific tests to ensure that the product issuitable for the intended use. With this verification all hazards and risks are transferred to our customers; our warranty is not valid. Qualified personnel:The personnel who are charged for the installation, operation and maintenance of theFPD20 must hold a relevant qualification. This can be based on training or relevanttuition.The personnel must be aware of this operating manual and have access to it at all times. The electrical connection should only be carried out by a fully qualified electrician.General safety instructions:In all work, the existing national regulations for accident prevention and safety in the workplace must be complied with. Any internal regulations of the operator must also becomplied with, even if these are not mentioned in this manual. Degree of protection according to EN 60529:Please ensure that the ambient conditions at the site of use does not exceed the requirements for the stated protection rating (§ 9 "Technical data").Only use the FPD20 if it is in perfect condition. Damaged or faulty devices must bechecked without delay and, if necessary, replaced.When fitting, connecting and removing the FPD20 use only suitable appropriate tools. Hold the volume sensor during fitting and in transport only by its housing, never by theplugged connector socket!Do not remove or obliterate type plates or other markings on the device, as otherwise the warranty is rendered null and void.Special safety instructions:Only the housing of the flow sensor FPD-23 can be dismantled for cleaning, the otherflow sensors must under no circumstances be dismantled as this will damage the instrument!When removing the upper section of the flow sensor, do not use screwdrivers or similar tools as levers. Pliers must not be used to remove the gear wheels from the housing.Series FPD20For your notesTechnical changes reserved - 7 -No abrasive media permitted.The pressure loss ∆p must not be exceeded, otherwise it could cause damage:∆p = 145 psi by FPD-21 and FPD-22 ∆p = 232 psi by FPD-23 and FPD-24.Leaks of hazardous materials that are conveyed must be collected and disposed of in such a way that there is no danger to persons or to the environment. Statutoryregulations must be observed in these cases.Important for maintenance, cleaning and disassembly:The device and conduits can still contain the conveyed medium or a cleaning agent. All regulations concerning this medium must be complied with. Sufficiently large collectingcontainers should be available.During work on and removal of sensors depressurize pipework and disconnect electricity.Further warnings that are specifically relevant to individual operating procedures or activities can be found at the beginning of the relevant sections of this operating manual.For your notes Series FPD20- 8 - M-5455/03153 Construction and functionInside the sensor housing are two gear wheels and their low-friction bearings. Duringoperation these are driven by the moving fluid. This gear wheel movement is sampled non-contacting through a sensor in the top of the housing and converted into electric signals. The signals are conveyed via a preamplifier plugged to the top of the housing to the display unit which is connected to the meter. Construction / Components: ① Top of the housing.② Bottom of the housing. ③ Gear. ④ Bearing shaft. ⑤ Bearing. ⑥Sensor.⑦ Connector socket with preamplifier. ⑧ O-ring. ⑨ Plug.Series FPD20 For your notesTechnical changes reserved - 9 -4 Installation and electrical connectionBefore delivery the flow sensor was tested in the factory and is ready to use as soon as it has been fitted and the electrical leads connected. Safe access to the integral measuring unit for visual inspection should be provided at all times, even if the unit is in operation.CAUTION! Material damage!Hold the volume sensor during fitting and in transport only by its housing, never by the plugged connector socket!Before installing, check that❒ the wetted materials of the device are suitable for the media being used (♑ § 9.1 "Wettedcomponents").❒ the equipment is switched off and is in a safe and de-energized state. ❒ the equipment is depressurized and has cooled down.SUITABLE TOOLS:Use only suitable tools of the correct size.4.1 Installation FPD20The device can be connected with your system with the aid of pipe connections in the housing (♑ § 9: "Technical data").CAUTION! Material damage!Only piping and connectors may be used which are suitable for the expected pressure range. Observe the specifications of the manufacturer concerned!Ensure that the maximum operating pressure of the flow sensor cannot be exceeded.Mounting:Firstly deaerate the system completely.Clean the flow system thoroughly. All component parts must be free of installationresidues (metal shavings, weld spatter).Turn the adapter into the flow sensor (not applicable for type FPD-…-BSPP). Connect the pipes to the inlet and outlet of the metering unit. Observing themanufacturer’s instructions. Here is: the fitting position any the flow directionanyWhen installing, make sure no jointing compounds get into the interior of the pipelines.IMPORTANT!The flow sensor must not be distorted during installation.After commissioning, check all connections for leaks.For your notes Series FPD20- 10 - M-5455/03154.2 Electrical connectionThe electrical connection of the FPD20 is via cable socket.CAUTION! Electric current!The electrical connection of the FPD20 should only be carried out by a fully qualified electrician. De-energize the electrical system before connecting the FPD20.Unscrew the fastening screws and pull the cable socket off of the top of the housing. Pull the locking screw out of the connector. Only after removing the screw, you can openthe connector socket's cap and pick them away.Open the connector socket's cap and loosen the cable gland and the mains lead cleat.Arrange the connection cable through the screwed cable gland and fix the electricalconnections according to the allocation plan below.Tighten the mains lead cleat and the cable gland.Close the cap and put the locking screw into the connector socket.Put the connector socket on the plug and tighten the locking screw slightly.Series FPD20 For your notes 5 OperationThe flow sensor has been factory-tested before delivery. It is ready to use as soon as it has been mounted and the electrical leads connected.When it is in use, one LED in the connector lights up as long as there is a continuous flow of fluid through the measuring unit.IMPORTANT! Comply with the permissible limits!The flow sensor must only be operated within the permitted limits (♑ § 9: "Technicaldata").6Problems and returnsIf the flow sensor is not operating perfectly, first check the electrical components while the unit is operating.This work may only be done by a qualified electrician.Problems:The following table details what problems you can solve yourself and how to solve them.Returns:When returning OMEGA equipment please note that inspection and/or repair can only take place when accompanied by a Safety Data Sheet for the flow medium, and the equipment has already been flushed and cleaned prior to return. If this condition is not observed, then OMEGA reserves the right to return the instrument carriage unpaid.These conditions serve to protect the safety of our staff - we are grateful for your understanding.For your notes Series FPD207 Maintenance and cleaningCAUTION! Risk of injury due to electric shock or over-pressurization! There is a great risk of injury when working on a live or pressurized device. Make sure that the plant is shut down professionally.Make sure the system is depressurized before you start working with or remove the device.CAUTION! Material damage in case of curing fluids or deposits! Curing fluids or deposits can damage the device and its components.Clean the device as soon as possible using a suitable cleaning agent (♑ § 7.2.2).CAUTION! Material damage when opening!When opening or dismantling the device, critical parts or components can be damage. Never open or dismantle the device.Exception: Open only the FPD-23 for cleaning (♑ § 7.2.3).7.1 MaintenanceThe FPD20 is maintenance-free and cannot be repaired by the user. In case of a defect, the device must be replaced or returned to the manufacturer for repair.IMPORTANT! Clean in regularly scheduled intervals.The FPD20 should be flushed with a suitable cleaning agent in regularly scheduled intervals. The cleaning intervals depend on the properties of the fluid being used.Comply with the safety data sheet or the specifications of the manufacturer of the fluid being used.7.2 CleaningIMPORTANT! Open only the FPD-23 for cleaning!Never dismantle the volume sensors FPD-21, FPD-22 and FPD-24 under any circumstances since that will damage the measuring instrument!7.2.1General cleaningClean the FPD20 with a dry or slightly damp lint-free cloth. Do not use sharp objects or aggressive agents for cleaning.Series FPD20For your notes7.2.2 Flushing the volume sensorRemove the flow sensor (♑ § 8: "Removing the device"). Empty the measurement device.Flush the device with a cleaning agent that is suitable for the components (♑ § 9.1) beingused (e.g., solvents, acetone...).Reinstall the measuring instrument in your metering section (♑ § 4.1).7.2.3 Cleaning the FPD-23CAUTION! Material damage when opening!Opening with unsuitable tools can cause scratches and damages to the interior surfaces of the device. They lead to measurement errors, premature wear and malfunctions. Never lever apart the volume sensor in the separation joint between the housing top and the housing bottom with a screwdriver or similar tool.Never take the gear wheel out of the housing with a pair of piston.Loosen and remove the fastening screws that hold both measuring-element housing-halves together.Carefully separate the housing top from the housing bottom. Carefully remove the interior volume sensor components.Clean the interior of the housing bottom, the gear wheel, the bearing and the O-ring witha cleaning agent that is suitable for the material (e.g. solvents, acetone...).Important in case of damages!If mechanical damage is found within the housing or on the gear wheels, the complete unit must be returned to the manufacturer for repair. (♑ § 6: "Returns").All parts must be free of contamination. Ensure that no foreign matter remains inside the flow sensor during installation.Insert both gear wheels and their bearings in the lower housing part. Lay the o-ring in the groove of the housing.Place the upper housing part over the lower housing part.Tighten all the screws holding the housing crosswise with a torque of 50 Nm.Reinstall the measuring instrument in your metering section (♑ § 4.1).For your notes Series FPD208 Removing the device and disposalCAUTION! Risk of injury!Never remove the device from a plant in operation. Make sure that the plant is shut down professionally.Before removal:Before removing, make sure❒ the equipment is switched off and is in a safe and de-energized state. ❒ the equipment is depressurized and has cooled down.Removing the device:Loosen the securing screw on the connector socket cap.Remove the cable socket cover and pull the cable socket off the housing. Remove the electrical connections.The device and conduits may still contain the conveyed medium or a cleaning agent. All regulations concerning this medium must be complied with. Sufficiently large collecting containers should be available.Disengage the pipeline connections from the housing with appropriate tools and removethe FPD20.When using hardening media, clean the flow sensor with a suitable cleaning agent aspromptly as possible ( § 7.2.2).IMPORTANT! Do not hold onto the cable socket!When cleaning, transporting and installing the flow sensor, make sure that it is carried by holding the housing only and not by the connector socket.Disposal:NO HOUSEHOLD WASTE!The FPD20 consists of various different materials. It must not be disposed of with household waste.Take the FPD20 to your local recycling plantorsend the FPD20 back to your supplier or toOMEGA.Series FPD20 For your notes 9 Technical dataThe technical data of customized versions may differ from the data in these instructions. Please observe the information specified on the type plate.9.1 Characteristics FPD20* Limited measuring range with higher viscosities ( § 9.2 "Pressure drop").** not Type FPD-…-BSPP.For your notes Series FPD20 Wetted components:* not Type FPD-…-BSPP.9.2 Pressure dropSeries FPD20 For your notes9.3 DimensionsFor your notes Series FPD20 For your notesSeries FPD20Series FPD20M-5455/0315。

FDH45N50F中文资料

Dynamic Characteristics
VDS = 40V, ID = 22.5A
(Note 4) --
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
Coss
Output Capacitance
Min.
Off Characteristics
BVDSS
Drain-Source Breakdown Voltage
VGS = 0V, ID = 250μA
500
ΔBVDSS / ΔTJ
Breakdown Voltage Temperature Coefficient
ID = 250μA, Referenced to 25°C
1
FDH45N50F Rev. B

元器件交易网
FDH45N50F 500V N-Channel MOSFET, FRFET
Package Marking and Ordering Information
Device Marking
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
VGS = 0V, IS = 45A dIF/dt =100A/μs
--
--
--
--
(Note 4)
--
Typ.
-0.5 -----
-0.105 49.0
5100 790 62 161 342
140 500 215 245 105 33 45
Thermal Characteristics