FT-2011写频说明

合集下载

IFS-15M+-中文用户手册V0.01

第二章安装 ........................................................................7 安全提醒及预防措施 .................................................................7 操作安全警告 .......................................................................7 维护及外观保护 .....................................................................8 运输及存储 .........................................................................8 安装 ...............................................................................8 开箱 ...............................................................................8 外观总览 ...........................................................................9 供电方式 ..........................................................................10 安装拆卸方式 ......................................................................10 电池充电 ..........................................................................11 电池状态 ..........................................................................11 电池激活 ..........................................................................12 加热槽 ............................................................................12

费思FT6300A系列中小功率电子负载用户手册适用型号(FT6301A-FT6306A)

仅作以上保证，不作其它明示或默示性保证，其中包括适销性、某些特定应用的合理性与适用性等的默示保证，无论在合同中、民事过失上，或是其它方面。费思科技不对任何特殊的、偶然或间接的损害负责。
安全摘要
在操作和维修电子负载过程中，请严格遵守以下安全须知。不遵守以下注意事项或本手册中其它章节提示的特定警告，可能会削弱本负载所提供的保护功能。对于用户不遵守这些注意事项而造成的后果，费思科技不负任何责任。
目录 ....................................................................................................................................................... IV
II
安全标识
在本产品外壳、用户手册所使用国际符号的解释请参见下表。
III
目录
前言........................................................................................................................................... I 通告........................................................................................................................................... I
第 2 章安装.......................................................................................................................................... 11

8800系列数字无线测试系统入门指南说明书

8800 SeriesDigital Radio Test SystemGetting Started Manual8800 S e r i e s G e t t i n g S t a r t e d M a n u a l8800 SeriesDigital Radio Test System Getting Started ManualPUBLISHED BY VIAVI Solutions, Inc. COPYRIGHT VIAVI Solutions, Inc. 2019All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or byany means, electronic, mechanical, photocopying, recording or otherwise without the prior permission of the publisher.Original Printing Mar 2015 Aug 2015 Jan 2016 Dec 2019 Issue-2 Issue-3 Issue-4Product WarrantyRefer to /en-us/warranty-information for the Product Warranty information.Electromagnetic CompatibilityDouble shielded and properly terminated external interface cables must be used with this equipment when interfacing with the REMOTE Connector. For continued EMC compliance, all external cables must be shielded and three meters or less in length. Nomenclature StatementIn this manual, 8800 Series refers to the 8800 Series Digital Radio Test System.In this manual, Test Set, Digital Radio Test System or Unit refers to the 8800 Series Digital Radio Test System.Declaration of ConformityThe Declaration of Conformity Certificate included with the Unit should remain with the Unit. VIAVI recommends the operator reproduce a copy of the Declaration of Conformity Certificate to be stored with the Operation Manual for future reference.Software VersionVIAVI updates Test Set software on a routine basis. As a result, examples may show images from earlier software versions. Images are updated when appropriate.Complying with InstructionsThe safety precautions in this manual must be observed during installation and operation. VIAVI assumes no liability for failure to comply with any safety precaution outlined in this manual.DFARS/Restricted Rights NoticesIf software is for use in the performance of a U.S. Government prime contract or subcontract, software is delivered and licensed as “Commercial computer software” as defined in DFAR 252.227-7014 (Feb 2014), or as a “commercial item” as defined in FAR 2.101(a) or as “Restricted computer software” as defined in FAR 52.227-19 (Dec 2007) or any equivalent agency regulation or contract clause. Use, duplication or disclosure of Software is subject to the VIAVI standard commercial license terms, and non-DOD Departments and Agencies of the U.S. Government will receive no greater than Restricted Rights as defined in FAR 52.227-19(c)(1-2) (Dec 2007). U.S. Government users will receive no greater than Limited Rights as defined in FAR 52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any technical data.PrecautionsSAFETY FIRST - TO ALL OPERATIONS PERSONNELGeneral Conditions of UseThis product is designed and tested to comply with the requirements of IEC/EN61010-1 ‘Safety requirements for electrical equipment for measurement, control and laboratory use’ for Class I portable equipment and is for use in a pollution degree 2 environment. The equipment is designed to operate from installation supply Category II. The Digital Radio Test System should be protected from liquids such as spills, leaks, etc. and precipitation such as rain, snow, etc. When moving the equipment from a cold to hot environment, allow the temperature of the equipment to stabilize before the Unit is connected to an AC power supply to avoid condensation forming. The equipment must only be operated within the environmental conditions specified in the product specifications. This product is not approved for use in hazardous atmospheres or medical applications. If the equipment is to be used in a safety-related application, such as avionics or military applications, the suitability of the product must be assessed and approved for use by a competent person. Refer all servicing of the Unit to Qualified Technical Personnel.Safety Identification in Technical ManualThis manual uses the following terms to draw attention to possible safety hazards that may exist when operating or servicing this equipment:Safety Symbols in Manuals and on UnitsCase, Cover or Panel RemovalOpening the Case Assembly exposes the operator to electrical hazards that may result in electrical shock or equipment damage. Do not operate the Digital Radio Test System with the Case Assembly open.Equipment Grounding ProtectionImproper grounding of equipment can result in electrical shock.Power CordsThe AC Power Cord included with the Digital Radio Test System, or an appropriate replacement, should be used to connect the Digital Radio Test System to a grounded AC power supply. Failure to ground the Digital Radio Test System may expose the operator to hazardous voltage levels. To connect the Digital Radio Test System to a Class II (ungrounded) 2-terminal socket outlet, fit the power cord with either a 3-pin Class I plug used in conjunction with an adapter incorporating a ground wire or fit the power cord with a Class II plug containing an integral ground wire. The ground wire must be securely fastened to ground; grounding one terminal on a 2-terminal socket does not provide adequate protection. Power cords must be in good operating condition. Power cords must not be frayed or broken, nor expose bare wiring. Using a damaged power cord may expose the operator to hazardous voltage levels.International Power RequirementsThe AC power cord must meet local regulations and power requirements. Check with local standards and regulations to ensure the power cord being used meets all local safety regulations.Use Recommended Fuses OnlyUse only fuses specifically recommended for the equipment at the specified current and voltage ratings. Refer to Performance Specifications for fuse requirements and specifications.Internal BatteryThe Digital Radio Test System contains a Lithium Ion Battery.EMI (Electromagnetic Interference)Input OverloadFire HazardsStatic Sensitive ComponentsToxic HazardsBERYLLIABERYLLIUMCOPPERLITHIUMENVIRONMENTAL / PHYSICALOverall Dimensions343 mm (W), 293 mm (L), 146 mm (D)(13.50 in X 11.54 in X 5.75 in)Weight17 lbs. (7.71 kg)Temperature (Storage)-40°C to +71°CBattery must not be subjected to temperatures below -20°C, nor above +60°CTemperature (Operation)DC Only (Battery removed, contingent upon applied RFpower over time*)-20°C to +50°CBattery (typical based on internal temperature rise / usage of instrument*)-20°C to +50°CBattery must not be subjected to temperatures below -20°C, nor above +60°CAltitude4600 M (DC Operation) (MIL-PRF-28800F, Class 3)3048 M (AC Operation)Relative Humidity5% to 95% (MIL-PRF-28800F, Class 3)Shock (Functional)30 G (MIL-PRF-28800F, Class 3) Vibration5 to 500 Hz Random Vibrations (MIL-PRF-28800F, Class 3) Bench HandlingMIL-PRF-28800F, Class 3* Use reason when working with RF test instruments. All thermal ratings are dependent upon applied RF power.The Digital Radio Test System alarms once the internal temperature exceeds predetermined limits. Applying power continuously in high ambient temperature conditions resultin a heat build-up within the instrument.COMPLIANCE / SAFETYEMCEmissions and ImmunityMIL-PRF-28800FEN61326 Class AEN61000-3-2EN61000-3-3SafetyUL 6101-1EN61010-1CSA C22.2 No. 61010-1AC INPUT POWER (AC to DC Converter/Charger Unit) Voltage Range100 to 250 VAC, 3 A maximum, 47 to 63 HzVoltage Fluctuation<10% of nominal input voltageTransient OvervoltageInstallation Category IIUsage EnvironmentIndoor Use80% Maximum Relative Humidity for temperatures up to 31°C decreasing linearly to 50% RH at +40°C Installation Category IIPollution Degree 2Operating Temperature0°C to +40°CStorage Temperature-20°C to +85°CEMIEN55022 Class BEN61000-3-2 Class DSafetyUL 1950CSA 22.2 No. 234 and No. 950IEC 950/EN 60950DC INPUT POWERVoltage Range11 to 24 VdcMaximum Power55 WTypical Power30 WDC Fuse Requirement5 A, 32 Vdc, Mini-Blade, Type FBATTERYBattery TypeLithium Ion (Li Ion) Battery packBattery must not be subjected to temperatures below -20°C, nor above +60°COperation Time3 hours (Minimum Backlight - Still Viewable)2.5 hours (100% Backlight)Charge Time (using provided AC to DC Converter/Charger Unit)4 hours (Unit OFF) (Typical)4 hours (Unit ON) (Typical)Battery does not charge when Battery temperature is <0°C and >+45°C.Dead Battery (<10% capacity) is to be charged for20 minutes before operation on External DC Power.1. UNPACK UNIT STEP PROCEDURE1. Open the shipping container.2. Remove the top packing mold.3. Remove the Digital Radio Test System from thebottom packing mold.4. Remove the protective plastic bag from the DigitalRadio Test System and inspect the contents.8800S e r i e s G e t t i n g S t a r t e d M a n u a l2. INSTALLATION - CONNECTION TO POWERAC Power ConnectionThe External DC Power Supply should only be connected to a grounded AC supply outlet. The supplied External DC Power Supply operates over a voltage range of 100 to 240 VAC at 47 to 63 Hz. For AC operation, the AC Line Cable, connected to the External DC Power Supply, is equipped with a standard three-prong plug and must be connected to a properly grounded three-prong receptacle.BatteryThe Digital Radio Test System is powered by an internal Lithium Ion battery pack. The Digital Radio Test System is supplied with an External DC Power Supply which allows the operator to recharge the battery using AC power. The Digital Radio Test System can operate continuously on AC power via the External DC Power Supply, for servicing and/or bench tests. The internal battery is equipped to power the Digital Radio Test System for 2.5 hours of continuous use, after which time, the Digital Radio Test System battery needs recharging. When the BAT Indicator is GREEN, the battery is at 100% full charge. When the BAT Indicator is AMBER, the battery is charging. If the battery level is ≤5% (BAT Icon), a “Low Battery” warning message is displayed. The battery charger operates whenever the supplied External DC Power Supply or a suitable (11 to 24 Vdc) DC Power source is applied to the Digital Radio Test System. When charging, the battery reaches a 100% charge in approximately four hours. The internal battery charger allows the battery to charge between a battery temperature range of 0° to 45°C. The battery should be charged every three months (minimum) or disconnected for long term inactive storage periods of more than six months. The battery must be removed when conditions surrounding the Digital Radio Test System are <-20°C or >60°C. Allow 20 minutes for the battery to charge when turning the Digital Radio Test System ON from a dead battery condition.ﺔﻠﺳﻠﺳﻟا8800 Arrayﻲﻣﻗرﻟا وﯾدارﻟا رﺎﺑﺗﺧا مﺎظﻧمادﺧﺗﺳﻻا ءدﺑ لﯾﻟدﺞﺗﻧﻣﻟا نﺎﻣﺿﻊﺟار/en-us/warranty-information ﺞﺗﻧﻣﻟا نﺎﻣﺿﺑ ﺔﺻﺎﺧﻟا تﺎﻣوﻠﻌﻣﻟا ﺔﻓرﻌﻣﻟ. ﻲﺳﯾطﺎﻧﻐﻣورﮭﻛﻟا ﻖﻓاوﺗﻟاﻊﻣ ، ،ﺔﺑﺳﺎﻧﻣ تﺎﯾﺎﮭﻧﺑ ةدوزﻣو بﯾﺟﺣﺗﻟا ﺔﺟودزﻣ ﺔﯾﻧﯾﺑ تﻼﺑﺎﻛ مادﺧﺗﺳا بﺟﯾ.دﯾﻌﺑﻟا لﺻوﻣﻟﺎﺑ ﮫﻠﯾﺻوﺗ دﻧﻋ زﺎﮭﺟﻟا اذھ بﺟﯾ ،رﻣﺗﺳﻣ ﻲﺳﯾطﺎﻧﻐﻣورﮭﻛ ﻖﻓاوﺗ ﻖﯾﻘﺣﺗ لﺟأ نﻣ ﺎﮭﻟوط نوﻛﯾ نأ بﺟﯾ ﻲﺗﻟاو ﺔﯾﺟرﺎﺧﻟا تﻼﺑﺎﻛﻟا ﻊﯾﻣﺟ بﯾﺟﺣﺗ3 .لﻗأ وأ رﺎﺗﻣأ تﺎﺣﻠطﺻﻣﻟا نﺎﯾﺑﺔﻠﺳﻠﺳﻟا رﯾﺷﺗ ،لﯾﻟدﻟا اذھ ﻲﻓ8800 ﺔﻠﺳﻠﺳﻟا ﻲﻣﻗرﻟا وﯾدارﻟا رﺎﺑﺗﺧا مﺎظﻧ ﻰﻟإ8800. ﺔﻠﺳﻠﺳﻟا ﻲﻣﻗرﻟا وﯾدارﻟا رﺎﺑﺗﺧا مﺎظﻧ ﻰﻟإ تادﺣوﻟا وأ ﻲﻣﻗرﻟا وﯾدارﻟا رﺎﺑﺗﺧا مﺎظﻧ وأ رﺎﺑﺗﺧﻻا ﺔﻋوﻣﺟﻣ رﯾﺷﺗ ،لﯾﻟدﻟا اذھ ﻲﻓ8800. ﺔﻘﺑﺎطﻣﻟا نﻼﻋإﺔﻘﺑﺎطﻣﻟا نﻼﻋإ ةدﺎﮭﺷﺑ ظﺎﻔﺗﺣﻻا بﺟﯾةدﺣوﻟﺎﺑ .ﺎﮭﻌﻣ تﻘﻓرأ ﻲﺗﻟا ﻲﺻوﺗVIAVI ﻊﺟرﻣﻛ لﯾﻐﺷﺗﻟا لﯾﻟد ﻊﻣ ﺎﮭﺑ ظﺎﻔﺗﺣﻻاو ،ﺔﻘﺑﺎطﻣﻟا نﻼﻋإ ةدﺎﮭﺷ نﻣ ﺔﺧﺳﻧ جارﺧﺗﺳﺎﺑ لﻐﺷﻣﻟا.ﻲﻠﺑﻘﺗﺳﻣ ﺞﻣﺎﻧرﺑﻟا رادﺻإموﻘﺗVIAVI رﺎﺑﺗﺧﻻا ﺔﻋوﻣﺟﻣ تﺎﯾﺟﻣرﺑ ثﯾدﺣﺗﺑلﻛﺷﺑ ودير .ﺟﯾﺗﻧو ﻲﻓ ﺔﻘﺑﺎﺳ تﺎﯾﺟﻣرﺑ تارادﺻإ نﻣ روﺻ ضرﻋ مﺗﯾ دﻗ ،كﻟذﻟ ﺔﺔﻠﺛﻣﻷا . تﻗوﻟا ﻲﻓ روﺻﻟا ثﯾدﺣﺗ مﺗﯾ.بﺳﺎﻧﻣﻟا مازﺗﻟﻻاتادﺎﺷرﻹﺎﺑ لﯾﻐﺷﺗﻟاو بﯾﻛرﺗﻟا ءﺎﻧﺛأ ﺔﯾﻟﺎﺗﻟا ﺔﻣﻼﺳﻟا تﺎطﺎﯾﺗﺣا ةﺎﻋارﻣ بﺟﯾ. لﻣﺣﺗﺗ ﻻVIAVI .لﯾﻟدﻟا اذھ ﻲﻓ ﺔﺣﺿوﻣﻟا ﺔﻣﻼﺳﻟا تﺎطﺎﯾﺗﺣا نﻣ يﺄﺑ مازﺗﻟﻻا ﻲﻓ قﺎﻔﺧﻹا نﻋ ﺔﯾﻟوﺋﺳﻣ يأتﺎطﺎﯾﺗﺣﻻا–تﺎﯾﻠﻣﻌﻟا ﻲﻓ نﯾﻠﻣﺎﻌﻟا ﻊﯾﻣﺟﻟﻻوأ نﺎﻣﻷامادﺧﺗﺳﻼﻟ ﺔﻣﺎﻋ طورﺷ‘ﻲﻠﻣﻌﻣﻟا مادﺧﺗﺳﻻاو ،مﻛﺣﺗﻟاو ،سﺎﯾﻘﻟﺎﺑ ﺔﺻﺎﺧﻟا ﺔﯾﺋﺎﺑرﮭﻛﻟانﻣ ﺔﻟوﻣﺣﻣﻟا تادﻌﻣﻠﻟ‘تادﻌﻣﻠﻟ نﺎﻣﻷا تﺎﺑﻠطﺗﻣIEC/EN61010-1تﺎﺑﻠطﺗﻣ ﻊﻣ ﻖﺑﺎطﺗﯾﻟ هرﺎﺑﺗﺧاو ،ﺞﺗﻧﻣﻟا اذھ مﯾﻣﺻﺗ مﺗﮭﺟ ﺔﯾﺎﻣﺣ بﺟﯾزﺎﻲﻣﻗرﻟا وﯾدارﻟا رﺎﺑﺗﺧا مﺎظﻧII.نﻣﺔﺋﻔﻟاﺔﺋﻔﻟا نﻣ بﯾﻛرﺗﻟا تادﻌﻣ لﻼﺧ نﻣ لﻣﻌﻠﻟ زﺎﮭﺟﻟا اذھ مﯾﻣﺻﺗ مﺗIﺔﯾﻧﺎﺛﻟا ﺔﺟردﻟا نﻣ ثوﻠﺗ ﻰﻠﻋ يوﺗﺣﺗ ﺔﺋﯾﺑ ﻲﻓ مادﺧﺗﺳﻼﻟو ،.لﺑﻗ زﺎﮭﺟﻟا ةرارﺣ ﺔﺟرد تﺎﺑﺛ ﻰﻠﻋ ظﺎﻔﺣﻟا ﻰﻠﻋ صرﺣا ،ةرﺎﺣ ﺔﺋﯾﺑ ﻰﻟإ ةدرﺎﺑ ﺔﺋﯾﺑ نﻣ زﺎﮭﺟﻟا لﻘﻧ دﻧﻋ .ﺦﻟإ ،ﺞﻠﺛﻟاو ،رطﻣﻟا لوطھو ،.ﺦﻟا برﺳﺗﻟاو ،ﺔﻗارﻣﻟا تارطﻘﻟا لﺛﻣ لﺋاوﺳﻟا مادﺧﺗﺳﻼﻟ دﻣﺗﻌﻣ رﯾﻏ ﺞﺗﻧﻣﻟا اذھفﯾﺛﻛﺗ يأ ثودﺣ بﻧﺟﺗﻟ ددرﺗﻣﻟا رﺎﯾﺗﻟا يذ ﺔﻗﺎطﻟا ردﺻﻣﺑ ةدﺣوﻟا لﯾﺻوﺗ.ﺞﺗﻧﻣﻟا تﺎﻔﺻاوﻣ ﻲﻓ ةددﺣﻣﻟا ﺔﯾﺋﯾﺑﻟا فورظﻟا ﻲﻓ طﻘﻓ زﺎﮭﺟﻟا لﯾﻐﺷﺗ بﺟﯾ.صﺧﺷ موﻘﯾ نأ بﺟﯾ ﮫﻧﺈﻓ ،ﺔﯾرﻛﺳﻌﻟا تﻻﺎﻣﻌﺗﺳﻻا وأ ،نارﯾطﻟا تﺎﯾﻧورﺗﻛﻟإ لﺛﻣ نﻣﻷﺎﺑ ﻖﻠﻌﺗﻣ ضرﻏ يأ ﻲﻓ زﺎﮭﺟﻟا مادﺧﺗﺳا مﺗﯾﺳ نﺎﻛ اذإ.ةرطﺧﻟا ﺔﯾﺑطﻟا تﻻﺎﻣﻌﺗﺳﻻا وأ ءاوﺟﻷا ﻲﻓ.نﯾﻠھؤﻣ نﯾﯾﻧﻓ نﯾﻔظوﻣ ﻰﻟإ ةدﺣوﻟا ﺔﻧﺎﯾﺻ لﺎﻣﻋأ ﺔﻓﺎﻛ ﺔﻟﺎﺣإ بﺟﯾﮫﻣادﺧﺗﺳا دﺎﻣﺗﻋاو ،كﻟذﻟ ﺞﺗﻧﻣﻟا ﺔﻣﺋﻼﻣ ىدﻣ مﯾﯾﻘﺗﺑ لھؤﻣ..ﻊﻧﺻﻣﻟا ﺎھددﺣﯾ مﻟ ﺔﻘﯾرطﺑ رﺎﺑﺗﺧﻻا ﺔﻋوﻣﺟﻣ مادﺧﺗﺳا مﺗ اذإ ﺔﺑوﻠطﻣﻟا ﺔﯾﺎﻣﺣﻟا زﺎﮭﺟﻟا رﻓوﯾ ﻻ دﻗرﯾذﺣﺗﻲﻧﻔﻟا لﯾﻟدﻟا ﻲﻓ نﺎﻣﻷا فﯾرﻌﺗلﯾﻟدﻟا اذھ مدﺧﺗﺳﯾﺔﯾﻟﺎﺗﻟا:ﮫﺣﻼﺻإ وأ زﺎﮭﺟﻟا اذھ لﯾﻐﺷﺗ دﻧﻋ ثدﺣﺗ دﻗ ﻲﺗﻟا ﺔﻠﻣﺗﺣﻣﻟا نﺎﻣﻷا رطﺎﺧﻣ ﻰﻟإ هﺎﺑﺗﻧﻻا تﻔﻠﻟتﺎﺣﻠطﺻﻣﻟا.ﻖﺋارﺣﻟﺎﻛ ،تﺄﺷﻧﻣﻟا وأ زﺎﮭﺟﻟا ﻲﻓ فﻠﺗ ثودﺣ ﻰﻟإ يدؤﺗ دﻗ ﺎﮭﻠھﺎﺟﺗ مﺗ اذإ ﻲﺗﻟا ﺔطﺷﻧﻷا وأ فورظﻟا ددﺣﯾﮫﯾﺑﻧﺗ.ةﺎﻓوﻟا وأ ،ﺔﯾﺻﺧﺷ ﺔﺑﺎﺻإ ثودﺣ ﻰﻟإ يدؤﺗ دﻗ ﺎﮭﻠھﺎﺟﺗ مﺗ اذإرﯾذﺣﺗﻲﺗﻟا ﺔطﺷﻧﻷا وأ فورظﻟا ددﺣﯾتادﺣوﻟاو ،ﺔﻟدﻷا ﻲﻓ نﺎﻣﻷا زوﻣرﺔﺣوﻠﻟا وأ ،ءﺎطﻐﻟا وأ ،ﺔﺑﻠﻌﻟا ﺔﻟازإ|ﮫﯾﺑﻧﺗرﯾذﺣﺗ.ﺔﺣوﺗﻔﻣ ﺔﺑﻠﻌﻟا تﻧﺎﻛ اذإ هذھ رﺎﺑﺗﺧﻻا ﺔﻋوﻣﺟﻣ لﻐﺷﺗ ﻻ.زﺎﮭﺟﻟا فﻠﺗ وأ ﻲﺋﺎﺑرﮭﻛﻟا ﻖﻌﺻﻟا ﻰﻟإ يدؤﺗ نأ نﻛﻣﯾ ﺔﯾﺋﺎﺑرﮭﻛ رطﺎﺧﻣ ﻰﻟإ ﺔﺑﻠﻌﻟا ﺢﺗﻓ دﻧﻋ لﻐﺷﻣﻟا ضرﻌﺗﯾ دﻗزﺎﮭﺟﻠﻟ ﺔﯾﺿﯾرﺄﺗﻟا ﺔﯾﺎﻣﺣﻟاﮫﯾﺑﻧﺗرﯾذﺣﺗ|.ﻲﺋﺎﺑرﮭﻛﻟاﻖﻌﺻﻠﻟ ضرﻌﺗﻟا ﻰﻟإ زﺎﮭﺟﻠﻟ ﺊطﺎﺧﻟا ضﯾرﺄﺗﻟا يدؤﯾ دﻗﺔﻗﺎطﻟا كﻼﺳأ لﯾﺻوﺗ ﻲﻓ قﺎﻔﺧﻹا ﺔﻟﺎﺣ ﻲﻓ.يذ ضرؤﻣ ﺔﻗﺎط ردﺻﻣﺑ رﺎﺑﺗﺧﻻا ﺔﻋوﻣﺟﻣ لﯾﺻوﺗ دﻧﻋ مﺋﻼﻣ لﯾدﺑ يأ وأ ،ةدﺣوﻟا ﻊﻣ ﺔﻘﻓرﻣﻟا ددرﺗﻣﻟا رﺎﯾﺗﻟا تاذ ﺔﻗﺎطﻟا كﻼﺳأ مادﺧﺗﺳا بﺟﯾددرﺗﻣ رﺎﯾﺗلﺻوأ ،نﯾﻓرط ﻰﻠﻋ يوﺗﺣﯾ (ضرؤﻣ رﯾﻏ)II.ةرطﺧ ﺔﯾطﻟوﻓ تﺎﯾوﺗﺳﻣﻟ لﻐﺷﻣﻟا ضرﻌﺗﯾ دﻗ ،ضرﻷﺎﺑ رﺎﺑﺗﺧﻻا ﺔﻋوﻣﺟﻣﺔﺋﻔﻟا نﻣ مﻛﺣﺗ حﺎﺗﻔﻣﺑ زﮭﺟﻣ سﺑﻘﻣﺑ رﺎﺑﺗﺧﻻا ﺔﻋوﻣﺟﻣ لﯾﺻوﺗﻟII.لﻣﺎﻛﺗﻣ ﻲﺿرأ كﻠﺳ ﻰﻠﻋ يوﺗﺣﯾﺔﺋﻔﻟا نﻣ سﺑﺎﻘﺑ ﺔﻗﺎطﻟا كﻠﺳ لﺻوأ وأ ،ﻲﺿرأ كﻠﺳ ﻰﻠﻋ يوﺗﺣﯾ ﺊﯾﺎﮭﻣ ﻊﻣ ﮫﻣدﺧﺗﺳاو نوﻧﺳ3ﺔﺋﻔﻟا نﻣ سﺑﺎﻘﺑ ﺔﻗﺎطﻟا كﻠﺳIﻰﻠﻋ يوﺗﺣﯾطﺑر بﺟﯾﺎﮭﻟ ﺢﻣﺳﺗ ﺔﻟﺎﺣ ﻲﻓ ﺔﻗﺎطﻟا كﻼﺳأ نوﻛﺗ نأ بﺟﯾكﻠﺳﻟا.ﺔﯾﻓﺎﻛﻟا ﺔﯾﺎﻣﺣﻟا رﻓوﺗ ﻻ نﯾﻓرط ﻰﻠﻋ يوﺗﺣﯾ ذﺧﺄﻣ ﻲﻓ دﺣاو فرطﻟ ﻲﺿرﻷا لﯾﺻوﺗﻟا ﺔﯾﻠﻣﻋ نأ ثﯾﺣ ؛ضرﻷا ﻲﻓ مﺎﻛﺣﺈﺑ ﻲﺿرﻷاﺔﻟﺎﺣ ﻲﻓﺔﯾطﻟوﻓ تﺎﯾوﺗﺳﻣ ﻰﻟإ لﻐﺷﻣﻟا ضرﻌﺗﯾ دﻗ ،فﻟﺎﺗ ﺔﻗﺎط كﻠﺳ يأ مادﺧﺗﺳا.ﺔﯾرﺎﻌﻟا كﻼﺳﻷا مادﺧﺗﺳا مدﻋو ،رﺳﻛﻟا وأ ،ﻰﻠﺑﻟا نﻣ ﺔﻗﺎطﻟا كﻼﺳأ ﻰﻠﻋ ظﺎﻔﺣﻟا بﺟﯾ.دﯾﺟ لﻛﺷﺑ لﻣﻌﻟﺎﺑ.ةرطﺧﺔﯾﻟودﻟا ﺔﻗﺎطﻟا تﺎﺑﻠطﺗﻣﺔﯾﻠﺣﻣﻟا تﺎﻣﯾﻠﻌﺗﻟاو ،ﺔﻗﺎطﻟا تﺎﺑﻠطﺗﻣﻟ ﺎﻘﺑﺎطﻣ ددرﺗﻣﻟا رﺎﯾﺗﻟا وذ ﺔﻗﺎطﻟا كﻠﺳ نوﻛﯾ نأ بﺟﯾ. ﻊﯾﻣﺟ ﻊﻣ ﻲﺋﺎﺑرﮭﻛﻟا كﻠﺳﻟا ﻖﺑﺎطﺗ نﺎﻣﺿﻟ ﺔﯾﻠﺣﻣﻟا رﯾﯾﺎﻌﻣﻟاو ﺢﺋاوﻠﻟا ﻊﺟار نﺎﻣﻷا تﺎﻣﯾﻠﻌﺗ.ﺔﯾﻠﺣﻣﻟاطﻘﻓ ﺎﮭﺑ ﻰﺻوﻣﻟا رھﺎﺻﻣﻟا مدﺧﺗﺳا.ةددﺣﻣﻟا ﺔﯾطﻟوﻔﻟاو رﺎﯾﺗﻟا تﺎﻔﯾﻧﺻﺗ ﻲﻓ زﺎﮭﺟﻟ اذﮭﻟ ﺎﺻﯾﺻﺧ ﺎﮭﺑ ﻰﺻوﻣﻟا رھﺎﺻﻣﻟا طﻘﻓ مدﺧﺗﺳا.ﮫﺻﺋﺎﺻﺧو رﮭﺻﻣﻟا تﺎﺑﻠطﺗﻣﻟ ءادﻷا صﺋﺎﺻﺧ ﻊﺟار ﺔﯾﻠﺧادﻟا ﺔﯾرﺎطﺑﻟاﺔﯾرﺎطﺑ ﻰﻠﻋ هذھ رﺎﺑﺗﺧﻻا ﺔﻋوﻣﺟﻣ يوﺗﺣﺗموﯾﺛﯾﻟ .نوﯾأ EMI(ﻲﺳﯾطﺎﻧﻐﻣورﮭﻛﻟا لﺧادﺗﻟا) ) ﻲﺳﯾطﺎﻧﻐﻣورﮭﻛﻟا لﺧادﺗﻠﻟ اردﺻﻣ تارﺎﺷﻹا تادﻟوﻣ نوﻛﺗ نأ نﻛﻣﯾEMI لﺎﺻﺗﻻا تﻼﺑﻘﺗﺳﻣ ﻲﻓ ( . ثودﺣ ﻰﻟإ ﺔﻟوﻘﻧﻣﻟا تارﺎﺷﻹا ضﻌﺑ يدؤﺗ نأ نﻛﻣﯾ لﺎﯾﻣأ ةدﻋ ﺔﻓﺎﺳﻣ ﻰﺗﺣ لﺎﺻﺗﻻا ﺔﻣدﺧ ﻲﻓ لﺧادﺗو ،شﯾوﺷﺗ. يأ نﺎﻌﻣﺈﺑ صﺣﻔﯾ نأ زﺎﮭﺟﻟا اذﮭﻟ مدﺧﺗﺳﻣ يأ ﻰﻠﻋ بﺟﯾ يأ ﻲﻓ عﺎﻌﺷإ ثودﺣ ﻰﻟإ يدؤﺗ ﺔﯾﻠﻣﻋلﺎﺻﺗﻻا ﻲﻓ ﺔﻠﻣﺗﺣﻣ لﺧادﺗ تﻼﻛﺷﻣ يأ ثودﺣ بﻧﺟﺗﻟ ﺔﻣزﻼﻟا تﺎطﺎﯾﺗﺣﻻا ذﺎﺧﺗا ﮫﯾﻠﻋ نﯾﻌﺗﯾ ﮫﻧإ ﺎﻣﻛ ،(ةرﺷﺎﺑﻣ رﯾﻏ وأ ةرﺷﺎﺑﻣ ﺔﻘﯾرطﺑ) ةرﺎﺷإ. ﮫﯾﺑﻧﺗلﺎﺧدﻺﻟ طرﻔﻣﻟا لﯾﻣﺣﺗﻟالﺎﺧدﻹا تﻼﺻوﻣﻟ لﺎﺧدﻹا تﺎﻔﯾﻧﺻﺗ ﻰﺻﻗأ ﻰﻠﻋ فرﻌﺗﻠﻟ ﺞﺗﻧﻣﻟا صﺋﺎﺻﺧ ﻊﺟارANT وT/R . ﮫﯾﺑﻧﺗ ﻖﺋارﺣﻟا رطﺎﺧﻣلادﺑﺗﺳﻻا دﻧﻋ نﯾﺣﯾﺣﺻﻟا فﯾﻧﺻﺗﻟاو عوﻧﻟا تاذ رھﺎﺻﻣﻟا طﻘﻓ مادﺧﺗﺳا مﺗﯾ ﮫﻧأ نﻣ دﻛﺄﺗ. لﺻوﻣ ﻲﻓ رﮭﺻﻣ ﻰﻠﻋ يوﺗﺣﯾ لﻣﺎﻛﺗﻣ ﺎﺳﺑﺎﻗ مدﺧﺗﺳﺗ تﻧﻛ اذإ نأ نﻣ دﻛﺄﺗﻓ ،دادﻣﻹا.زﺎﮭﺟﻟا اذﮭﻟ رﺎﯾﺗﻟا تﺎﺑﻠطﺗﻣ ﻊﻣ ﺊﻓﺎﻛﺗﻣ رﮭﺻﻣﻟا فﯾﻧﺻﺗ رﯾذﺣﺗلﺎﺧدﻺﻟ طرﻔﻣﻟا لﯾﻣﺣﺗﻟامﻣﺳﺗﻟا رطﺎﺧﻣموﯾﻠﯾرﯾﺑﻟاموﯾﻠﯾرﯾﺑﻟا سﺎﺣﻧموﯾﺛﯾﻠﻟاتﺎﻔﺻاوﻣﻟاﺔﯾدﺎﻣﻟا / ﺔﯾﺋﯾﺑﻟاﻊﺿﺧﺗ)(.ﮫﯾﺑﻧﺗ نودﺑ رﯾﯾﻐﺗﻠﻟ تﺎﻔﺻاوﻣﻟا ﺔﯾﻟﺎﻣﺟﻹا دﺎﻌﺑﻷا343 ،(ضرﻋ) مﻠﻣ293 ،(لوط) مﻠﻣ146 (ﻖﻣﻋ) مﻠﻣ)13.50 ﺔﺻوﺑX 11.54 ﺔﺻوﺑX 5.75 (ﺔﺻوﺑ نزوﻟا17 لطر )7.71 (مﺟﻛ (نﯾزﺧﺗﻟا) ةرارﺣﻟا ﺔﺟرد-40°C ﻰﻟإ+71°C نﻣ لﻗأ ةرارﺣ تﺎﺟردﻟ ﺔﯾرﺎطﺑﻟا ضرﻌﺗﺗ ﻻأ بﺟﯾ-20°C نﻣ ﻰﻠﻋأ وأ ،+60°C.(لﯾﻐﺷﺗﻟا) ةرارﺣﻟا ﺔﺟردددرﺗ ﺔﻗﺎط ﻰﻠﻋ دﻣﺗﻌﺗ ،ﺔﯾرﺎطﺑﻟا ﺔﻟازإ مﺗﯾ) طﻘﻓ رﺷﺎﺑﻣﻟا رﺎﯾﺗﻟا وﯾدارﻟا(*تﻗوﻟا رﺑﻋ ﺔﻣدﺧﺗﺳﻣﻟا -20°C ﻰﻟإ+50°C مادﺧﺗﺳا و ﺔﯾﻠﺧادﻟا ةرارﺣﻟا ﺔﺟرد عﺎﻔﺗرا ﻰﻠﻋ دﻣﺗﻌﺗ ﺔﯾدﺎﻋ) ﺔﯾرﺎطﺑﻟا(*زﺎﮭﺟﻟا-20°Cﻰﻟإ+50°Cبﺟﯾنﻣ لﻗأ ةرارﺣ تﺎﺟردﻟ ﺔﯾرﺎطﺑﻟا ضرﻌﺗﺗ ﻻأ -20°C نﻣ ﻰﻠﻋأ وأ ،+60°C . عﺎﻔﺗرﻻا:رﺷﺎﺑﻣ رﺎﯾﺗ لﯾﻐﺷﺗ4600 M )(MIL-PRF-28800F ﺔﺋﻔﻟا ،3((ددرﺗﻣ رﺎﯾﺗ لﯾﻐﺷﺗ)3048 M ﺔﯾﺑﺳﻧﻟا ﺔﺑوطرﻟا5% to 95% )MIL-PRF-28800F ، ﺔﺋﻔﻟا3((.ﮫﯾﺑﻧﺗ نودﺑ رﯾﯾﻐﺗﻠﻟ تﺎﻔﺻاوﻣﻟا ﻊﺿﺧﺗ) ﺔﯾﻔﯾظو ،ﺔﻣدﺻﻟا30 G )MIL-PRF-28800F ﺔﺋﻔﻟا ،3( زازﺗھﻻاﺔﯾﺋاوﺷﻋ تازازﺗھا5 ﻰﻟإ500 ) زﺗرھMIL-PRF-28800F – ﺔﺋﻔﻟا3(MIL-PRF-28800F ﺔﺋﻔﻟا ،3 ﺔﻟوﺎط ﻰﻠﻋ زﺎﮭﺟﻟا مادﺧﺗﺳاMIL-PRF-28800F ﺔﺋﻔﻟا ،3 ﻲﻛﻠﺳﻼﻟا ددرﺗﻟا رﺎﺑﺗﺧا ةزﮭﺟأ مادﺧﺗﺳا دﻧﻋ ﻖطﻧﻣﻟﺎﺑ نﻌﺗﺳا. ﺔﯾرارﺣﻟا تﺎﻔﯾﻧﺻﺗﻟا ﻊﯾﻣﺟﻓﺔﻠﻣﻌﺗﺳﻣﻟا ﻲﻛﻠﺳﻼﻟا ددرﺗﻟا ﺔﻗﺎط ﻰﻠﻋ دﻣﺗﻌﺗ . توﺻ ﻲﻣﻗرﻟا وﯾدارﻟا رﺎﺑﺗﺧا مﺎظﻧ ﻖﻠطﯾﺎﻔﻠﺳ ةردﻘﻣﻟا دودﺣﻟا ﺔﯾﻠﺧادﻟا ةرارﺣﻟا ﺔﺟرد زوﺎﺟﺗﺗ نأ درﺟﻣﺑ ﮫﯾﺑﻧﺗ. لﺎﻣﻌﺗﺳا يدؤﯾ دﻘﻓ ةدﺎﯾز ﻰﻟإ ﺔﯾﻟﺎﻌﻟا ﺔطﯾﺣﻣﻟا ةرارﺣﻟا تﺎﺟرد فورظ ﻲﻓ رارﻣﺗﺳﺎﺑ ﺔﻗﺎطﻟالﺧاد ﺔﻧوﺧﺳﻟا.زﺎﮭﺟﻟاﻲﺳﯾطﺎﻧﻐﻣورﮭﻛﻟاﻖﻓاوﺗﻟاﺔﻧﺎﺻﺣو تﺎﺛﺎﻌﺑﻧا MIL-PRF-28800F EN61326 ﺔﺋﻓA EN61000-3-2EN61000-3-3ﺔﻣﻼﺳﻟاUL 61010-1UL61010-1CSA C22.2 No. 61010-1تﺎﻔﺻاوﻣﻟا(ﻊﺑﺎﺗ) ددرﺗﻣ رﺎﯾﺗ تاذ لﺎﺧدإ ﺔﻗﺎط) رﺎﯾﺗ ﻰﻟإ ددرﺗﻣ رﺎﯾﺗ نﻣ لوﺣﻣ(نﺣﺷﻟا ةدﺣو/رﺷﺎﺑﻣ ﺔﯾطﻟوﻓ قﺎطﻧ100 ﻰﻟإ250 رﺷﺎﺑﻣ رﺎﯾﺗ طﻟوﻓVAC ،3 ،ﻰﺻﻗأ دﺣﺑ رﯾﺑﻣأ47 زﺗرھﻰﻟإ63 زﺗرھ ﺔﯾطﻟوﻔﻟا بﻠﻘﺗ>10ﻲﻣﺳﻻا لﺎﺧدﻹا ﺔﯾطﻟوﻓ نﻣ % رﺑﺎﻌﻟا ﺔﯾطﻟوﻔﻟا طرﻓبﯾﻛرﺗﻟا ﺔﺋﻔﻟ2 مادﺧﺗﺳﻻا ﺔﺋﯾﺑﻲﻠﺧاد مادﺧﺗﺳا 80 ﻰﻟإ لﺻﺗ ﻲﺗﻟا ةرارﺣﻟا تﺎﺟردﻟ ﻰﺻﻗﻷا ﺔﯾﺑﺳﻧﻟا ﺔﺑوطرﻟا دﺣ %ﻰﻟإ ﻲطﺧ لﻛﺷﺑ لﻘﺗ ﻲﺗﻟاو ﺔﯾوﺋﻣ50 ﺔﺟرد ﻲﻓ ﺔﯾﺑﺳﻧﻟا ﺔﺑوطرﻠﻟ %+ ةرارﺣ40 ﺔﯾوﺋﻣ بﯾﻛرﺗﻟا ﺔﺋﻓ2ثوﻠﺗﻟا ﺔﺟرد2لﯾﻐﺷﺗﻟا ةرارﺣ ﺔﺟرد 0°C ﻰﻟإ+40°C نﯾزﺧﺗﻟا ةرارﺣﻟا ﺔﺟرد -20°C ﻰﻟإ+85°C لﺧادﺗﻟاﻲﺳﯾطﺎﻧﻐﻣورﮭﻛﻟا EN55022 ﺔﺋﻓBEN61000-3-2 ﺔﺋﻓDﺔﻣﻼﺳﻟاUL 1950CSA 22.2 مﻗر234 مﻗرو950IEC 950/EN 6095رﺷﺎﺑﻣ رﺎﯾﺗ تاذ لﺎﺧدإ ﺔﻗﺎط :ﺔﯾطﻟوﻔﻟا قﺎطﻧ11 ﻰﻟإ24 Vdc ﻰﺻﻗﻷا ﺔﻗﺎطﻟا دﺣ55 تاو ﺔﯾدﺎﻌﻟا ﺔﻗﺎطﻟا30تاو رﺎﯾﺗﻟا يذ رﮭﺻﻣﻟا تﺎﺑﻠطﺗﻣرﺷﺎﺑﻣﻟا5ﻲﺑﻣأ، رﺷﺎﺑﻣ رﺎﯾﺗ طﻟوﻓ32 Vdc عوﻧ ،Fﺔﯾرﺎطﺑﻟاﺔﯾرﺎطﺑﻟا عوﻧ) نوﯾأ موﯾﺛﯾﻟ تﺎﯾرﺎطﺑ ﺔﻣزﺣLi Ion (نﻣ لﻗأ ةرارﺣ تﺎﺟردﻟ ﺔﯾرﺎطﺑﻟا ضرﻌﺗﺗ ﻻأ بﺟﯾ-20°C ﻰﻠﻋأ وأ ، نﻣ +60°C لﯾﻐﺷﺗﻟا تﻗو3(ﺔﺣﺿاو لازﺗ ﻻ) (ﺔﯾﻔﻠﺧﻟا ةءﺎﺿﻺﻟ ﻰﻧدﻷا دﺣﻟا) ﺔﻋﺎﺳ 2.5% ﺔﯾﻔﻠﺧ ةءﺎﺿإ) ﺔﻋﺎﺳ100( نﺣﺷﻟا تﻗو4 (لﯾﻐﺷﺗ فﺎﻘﯾإ ﺔﻟﺎﺣ ﻲﻓ ةدﺣوﻟا) تﺎﻋﺎﺳ(يدﺎﻋ) 4(لﯾﻐﺷﺗ ﺔﻟﺎﺣ ﻲﻓ ةدﺣوﻟا) تﺎﻋﺎﺳ(يدﺎﻋ) نﯾﺑ حوارﺗﺗ ةرارﺣ ﺔﺟرد دﻧﻋ ﺔﯾرﺎطﺑﻟا نﺣﺷ بﺟﯾ0°C و+45°C .طﻘﻓ < ﺔﻌﺳ) ﺎﻣﺎﻣﺗ ﺔﻏرﺎﻔﻟا ﺔﯾرﺎطﺑﻟا نﺣﺷ بﺟﯾ10 (%ةدﻣﻟ20 .ددرﺗﻣ رﺎﯾﺗ ﺔﻗﺎط لﻼﺧ نﻣ لﯾﻐﺷﺗﻟا لﺑﻗ ﺔﻘﯾﻗد.1ﺔﻣزﺣﻟا كﻓءارﺟﻹاةوطﺧﻟا.نﺣﺷﻟا ﺔﯾوﺎﺣ ﺢﺗﻓاو نﺣﺷﻟا ﺔﯾوﺎﺣ ﻰﻠﻋأ دوﺟوﻣﻟا قﻼﻏﻹا طﯾرﺷ ﻊطﻗا1.يوﻠﻌﻟا فﯾﻠﻐﺗﻟا بﻟﺎﻗ.يوﻠﻌﻟا فﯾﻠﻐﺗﻟا بﻟﺎﻗ عزﻧا2.ﻲﻣﻗرﻟا وﯾدارﻟا رﺎﺑﺗﺧا مﺎظﻧ.ﻲﻠﻔﺳﻟا فﯾﻠﻐﺗﻟا بﻟﺎﻗ نﻣ فﯾﻠﻐﺗﻟا داوﻣو3.عزﻧاصﺣﻓاوﻰﻠﻋ نﻣ ﻲﻗاوﻟا ﻲﻛﯾﺗﺳﻼﺑﻟا سﯾﻛﻟا عزﻧا4.ﻲﻣﻗرﻟا وﯾدارﻟا رﺎﺑﺗﺧا مﺎظﻧﻣﻟا.تﺎﯾوﺗﺣفﻠﻐﻣ رﺎﺑﺗﺧﻻا زﺎﮭﺟﻲﻟوﺑﻟا نﻣ سﯾﻛ لﺧادنﯾﻠﺛﯾإﻲﻠﻔﺳﻟا فﯾﻠﻐﺗﻟا بﻟﺎﻗنﺣﺷﻟا ﺔﯾوﺎﺣمادﺧﺗﺳﻻا ءدﺑ لﯾﻟد ﺔﻠﺳﻠﺳﻟا8800 .2بﯾﻛرﺗﻟا ددرﺗﻣﻟا رﺎﯾﺗﻟا تاذ ﺔﻗﺎطﻟا تﺎﺑﻠطﺗﻣ.ددرﺗﻣ رﺎﯾﺗ يذ ضرؤﻣ ردﺻﻣﺑ صﺎﺧ ذﻔﻧﻣﺑ طﻘﻓ رﺷﺎﺑﻣﻟا رﺎﯾﺗﻟا يذ ﻲﺟرﺎﺧﻟا ﺔﻗﺎطﻟا ردﺻﻣ لﯾﺻوﺗ بﺟﯾ ﻊﻣ هدﯾوزﺗ مﺗ يذﻟاو ،رﺷﺎﺑﻣﻟا رﺎﯾﺗﻟا وذ ﻲﺟرﺎﺧﻟا ﺔﻗﺎطﻟا ردﺻﻣ لﻣﻌﯾ مﺎظﻧﻲﻣﻗرﻟا وﯾدارﻟا رﺎﺑﺗﺧاﯾطﻟوﻓ قﺎطﻧ ﻰﻠﻋ نﻣ ﺔ100 ﻰﻟإ240 رﺷﺎﺑﻣ رﺎﯾﺗ ﺔﯾطﻟوﻓVAC ﺔﻌﺳ47 ﻰﻟإ63 .زﺗرھ لﺻﺗﻣﻟا ددرﺗﻣﻟا رﺎﯾﺗﻟا اذ طﺧﻟا لﺑﺎﻛ نﺈﻓ ،ددرﺗﻣﻟا رﺎﯾﺗﻟا يذ لﯾﻐﺷﺗﻠﻟﺗﻟا يذ ﻲﺟرﺎﺧﻟا ﺔﻗﺎطﻟا ردﺻﻣﺑ.تﺎﻛوﺷ ثﻼﺛ ﻰﻠﻋ يوﺗﺣﯾ ﺢﯾﺣﺻ لﻛﺷﺑ ضرؤﻣ سﺑﻘﻣﺑ ﮫﻠﯾﺻوﺗ بﺟﯾ ﮫﻧإ ﺎﻣﻛ ،تﺎﻛوﺷ ثﻼﺛ ﻰﻠﻋ يوﺗﺣﯾ سﺑﺎﻘﺑ دوزﻣ رﺷﺎﺑﻣﻟا رﺎﯾ ﻰﻠﻋ يوﺗﺣﯾ ﺊﯾﺎﮭﻣ سﺑﺎﻗ مدﺧﺗﺳﺗ ﻻ3 .ﻲﺋﺎﺑرﮭﻛﻟا ضﯾرﺄﺗﻟاو ،ﻲﻧدﻌﻣﻟا لﻛﯾﮭﻟا نﯾﺑ ﻖﻌﺻﻟا رطﺧﻟ كﻟذ كﺿرﻌﯾ دﻘﻓ .نﯾﺗﻛوﺷ وأ تﺎﻛوﺷ رﯾذﺣﺗ ضرﻌﺗﻟا لﺎﻣﺗﺣﻻ ارظﻧ.ﻲﺟرﺎﺧ ﺔﻗﺎط ردﺻﻣﺑ ﺔﻠﺻﺗﻣ رﺎﺑﺗﺧﻻا ﺔﻋوﻣﺟﻣ نوﻛﺗ ﺎﻣدﻧﻋ ﺔﺑﻠﻌﻟا مﺳﺟ قﻼﻏإ بﺟﯾ ﮫﻧﺈﻓ ،رﺎﺑﺗﺧﻻا ﺔﻋوﻣﺟﻣ ﻲﻓ ﻲﺋﺎﺑرﮭﻛﻟا ﻖﻌﺻﻠﻟ ﮫﯾﺑﻧﺗ ﺔﻗﺎطﻟا ردﺎﺻﻣ نﻣ ﺔﻟوﺻﻔﻣﻟا رﺎﺑﺗﺧﻻا ﺔﻋوﻣﺟﻣ مادﺧﺗﺳﺎﺑ ﻲﻠﺧادﻟا طﺑﺿﻟا تﺎﯾﻠﻣﻋو ،رﮭﺻﻣﻟا لادﺑﺗﺳاو ،ﺔﯾرﺎطﺑﻟا لادﺑﺗﺳا ﺔﯾﻠﻣﻋ مﺗﺗ نأ بﺟﯾ.ﺔﯾﺟرﺎﺧﻟا ﮫﯾﺑﻧﺗﺔﯾرﺎطﺑﻟازﺎﮭﺟﻟا لﻣﻌﯾنﻲﻣﻗرﻟا وﯾدارﻟا رﺎﺑﺗﺧا مﺎظ .ﺔﯾﻠﺧاد نوﯾأ موﯾﺛﯾﻟ ﺔﯾرﺎطﺑ ﺔﻣزﺣ ﺔطﺳاوﺑﻲﻣﻗرﻟا وﯾدارﻟا رﺎﺑﺗﺧا مﺎظﻧ نﺣﺷ ةدﺎﻋﺈﺑ لﻐﺷﻣﻠﻟ ﺢﻣﺳﯾ رﺷﺎﺑﻣ رﺎﯾﺗ يذ ﻲﺟرﺎﺧ ﺔﻗﺎط ردﺻﻣﺑ دوزﻣ.ددرﺗﻣ رﺎﯾﺗ تاذ ﺔﻗﺎط مادﺧﺗﺳﺎﺑ ﺔﯾرﺎطﺑﻟا زﺎﮭﺟﻟا لﯾﻐﺷﺗ نﻛﻣﯾﻲﻣﻗرﻟا وﯾدارﻟا رﺎﺑﺗﺧا مﺎظﻧ ،رﺷﺎﺑﻣ رﺎﯾﺗ يذ ﻲﺟرﺎﺧ ﺔﻗﺎط ردﺻﻣ ﺔطﺳاوﺑ ددرﺗﻣ رﺎﯾﺗ تاذ ﺔﻗﺎط لﻼﺧ نﻣ رارﻣﺗﺳﺎﺑ.ﺔﯾدﺿﻧﻟا تارﺎﺑﺗﺧﻻا وأ/و ﺔﻧﺎﯾﺻﻠﻟ طﺑﻟا زﺎﮭﺟﻟا لﯾﻐﺷﺗﻟ ﺔﻣﻣﺻﻣ ﺔﯾﻠﺧادﻟا ﺔﯾرﺎﻲﻣﻗرﻟا وﯾدارﻟا رﺎﺑﺗﺧا مﺎظﻧ سﻣﺧ ةدﻣﻟ2.5 ﺎﮭﻧﺣﺷ ةدﺎﻋإ نﯾﻌﺗﯾ نأ لﺑﻗ ،رﻣﺗﺳﻣﻟا مادﺧﺗﺳﻻا نﻣ . ﺎﻣدﻧﻋ رﺷؤﻣ نوﻛﯾBAT ﺔﺑﺳﻧﺑ ﺔﻧوﺣﺷﻣ ﺔﯾرﺎطﺑﻟا نأ ﻲﻧﻌﯾ اذﮭﻓ ،نوﻠﻟا رﺿﺧأ100 رﺷؤﻣ نوﻛﯾ ﺎﻣدﻧﻋ .%BAT ﺷﻟا دﯾﻗ ﺔﯾرﺎطﺑﻟا نأ ﻲﻧﻌﯾ اذﮭﻓ ،نوﻠﻟا رﻔﺻأ.نﺣ ،ﺔﯾرﺎطﺑﻟا ىوﺗﺳﻣ ﻎﻠﺑ اذإزﻣر ﻲﻓ ﺢﺿوﻣﻟا BAT %5 ≤"ﺔﻔﯾﻌﺿ ﺔﯾرﺎطﺑ" رﯾذﺣﺗﻟا ﺔﻟﺎﺳر ضرﻋ مﺗﯾﺳﻓ ،. ) ﻖﻓرﻣﻟا ﻲﺟرﺎﺧﻟا رﺷﺎﺑﻣﻟا رﺎﯾﺗﻟا لوﺣﻣ لﯾﺻوﺗ مﺗﯾ ﻰﺗﻣ ﺔﯾرﺎطﺑﻟا نﺣﺎﺷ لﻣﻌﯾ11 ﻰﻟإ24 Vdc طﻟوﻓ ـﺑ رﺷﺎﺑﻣ رﺎﯾﺗ يذ مﺋﻼﻣ ﺔﻗﺎط ردﺻﻣ وأ (رﺷﺎﺑﻣ رﺎﯾﺗﻲﻣﻗرﻟا وﯾدارﻟا رﺎﺑﺗﺧا مﺎظﻧ ﻰﻟإ ﺔﯾرﺎطﺑﻟا نﺣﺷ لﺻﯾ ،نﺣﺷﻟا دﻧﻋ .100 ﺔﯾﻠﺧادﻟا ﺔﯾرﺎطﺑﻟا نﺣﺎﺷ ﺢﻣﺳﯾ .تﺎﻋﺎﺳ ﻊﺑرأ ﻲﻓ ﺎًﺑﯾرﻘﺗ % نﯾﺑ حوارﺗﺗ ةرارﺣ ﺔﺟرد ﻲﻓ ﺔﯾرﺎطﺑﻟا نﺣﺷﺑ0° ﻰﻟإ45°C . ﺔﺗﺳﻟا ىدﻌﺗﺗ ﺔﻠﯾوط تارﺗﻔﻟ ﺔﻣدﺧﺗﺳﻣ رﯾﻏو ﺔﻧزﺧﻣ تﻧﺎﻛ اذإ ﺎﮭﻛﻓ وأ ،(ﻰﻧدأ دﺣﺑ) روﮭﺷ ﺔﺛﻼﺛ لﻛ ﺔﯾرﺎطﺑﻟا نﺣﺷ بﺟﯾ نﻣ لﻗأ رﺎﺑﺗﺧﻻا ﺔﻋوﻣﺟﻣ ﺔﺋﯾﺑﺑ ﺔطﯾﺣﻣﻟا ةرارﺣﻟا تﺎﺟرد نوﻛﺗ ﺎﻣدﻧﻋ ﺔﯾرﺎطﺑﻟا ﺔﻟازإ بﺟﯾ .روﮭﺷ20° نﻣ ﻰﻠﻋأ وأ60°C . رظﺗﻧا20 إ نﺣﺷﻟا نﻣ ﺔﯾرﺎطﺑﻟا نﻛﻣﺗﺗ ﻰﺗﺣ ﺔﻘﯾﻗد ءدﺑ مﺗ اذ زﺎﮭﺟﻟا لﯾﻐﺷﺗلا رﺎﺑﺗﺧا مﺎظﻧﻲﻤﻗﺮﻟا ﻮﯾدار .ﺎﻣﺎﻣﺗ ﺔﻏرﺎﻓ ﺔﯾرﺎطﺑ ﻖﯾرط نﻋ8800 系列Array数字无线电测试系统入门手册产品质保访问 /en-us/warranty-information 查看产品质保信息。

户外机柜产品说明书(江西万丰)

WF(G)-11室外机柜产品说明书感谢购买本公司的产品，在您安装使用之前请认真阅读本说明书！1、概述WF(G)-11型通信用室外机柜是一种适用于户外的综合型接入网设备。

可满足宽带及交换机设备的安装（选配）；电源的接驳；通信配线线路的成端；光、电线缆的进出；门禁的监控，并可提供门禁开关告警信号，具有良好的防盗性能；采用风扇强制制冷技术以及隔热保温设计，对室外机柜实现可靠的温度管理，确保柜内通信设备在高温和高寒等恶劣环境下的安全运行。

在户外安装条件下，可以抵御风沙、雨水、阳光的辐射的影响。

本设备由设备柜,蓄电池柜,风扇等组成。

２、机柜外形尺寸（见下图）３．产品的特点及功能3.1 柜体采用优质不锈钢做主材, 具有良好的机械及防腐性能,耐候性优良。

3.2 表面喷涂防紫外线粉末，双层隔热设计。

强度高，外型美观；3.3 标准19英寸安装方式，配置灵活；3.4 全正面化操作，节省机房空间；3.5 强弱电分开,有专门的走线槽,进缆跳线全正面化操作；3.6 有足够的光纤盘储空间，保证光缆、光纤的曲率半径；3.7 可靠完善的接地保护。

3.8 所有技术性能指标均符合GB4208-1993外壳防护等级IP55级.４．环境要求4.1 工作温度：-45℃～+55℃相对湿度：≤95%（+30℃）大气压力：70KPa～106Kpa 4.2 主要技术指标4.2.1 机柜部分◇机柜高压防护地与机柜绝缘，绝缘电阻>1000MV/500VDC◇机柜防护地与机柜间耐压>3000VDC/min不击穿，无飞弧5、设备的安装.户外机柜须安装在水泥基座或其它坚固可靠的基座上。

5．1水泥基座示意图（见下图）电池仓设备仓5.2机柜门的操作本设备的门锁采用专用钥匙进行的门的开启与锁闭。

开锁时，将锁盖板旋转开，将专用钥匙对入锁孔的凹槽，插入后向右旋转约75度，弹出锁体的把手，向右旋转把手，即可打开机柜门。

锁闭时，将把手向左旋转，对准把手槽压进槽内，拔出钥匙即可。

SF2011中文说明书

光纤寻障仪SF-2011说明书金赛讯（天津）电子技术有限公司目录目录 (2)第一章概述 (3)第二章产品参数 (4)2.1特性 (4)2.2产品参数 (4)第三章操作指南 (6)3.1使用说明 (6)3.2面板外观示意图 (7)3.3关机 (7)第一章概述SF-2011型Mini OTDR产品，运用先进的光反射时域分析技术，主要用于光纤断点定位以，光纤长度测量。

采用手持式便携外观设计，操作简便,功能齐全。

广泛适用于光缆施工与维护，光纤通信，监控，光纤CATV系统，光纤布线工程,光纤网络故障检测等。

SF-2011机身造型设计符合人体工学要求，美观耐用。

所有按键采用新型按键开关，简便，可靠，适合多种环境适用。

该机具有最多五处问题点显示功能，三分钟自动关机，电池不足告警功能，是目前性价比最高，最实用的断点寻测工具。

第二章产品参数2.1特性手持，便携式外观设计最多五处问题点显示功能五位液晶数值显示3分钟自动关机电池不足告警自动脉宽调整支持USB数据传送2.2产品参数光缆断点寻障仪●探头类型：FC/APC或FC/PC●光源类型：DFB型脉冲激光器●光源波长：1550nm±20m●测量光纤类型：适用于G652型单模光纤●测量精度：有反射断点：±10m，无反射断点：±200m ●测量精度：±（2m +2x10E-4 距离）●最小盲区：20m●最大测量距离：30km 或50km●解析度：0.001km●显示单位：km可见光●光源波长：650nm●输出功率：1mW●接头类型：万能头电源●电池类型：两节5号电池●电池工作时间(常温)：大于1000次或可见光连续工作10小时以上●自动关机时间：3分钟使用环境●工作温度：0℃ to +40℃●存储温度：-20℃ to +70℃●相对湿度：0 to 95％（无冷凝）物理特性●尺寸(mm):●重量(kg): 0.3第三章操作指南3.1使用说明●按压键实现开/关机动作，启动时自动校准10秒之后进入待机状态，若3分钟内无按键操作，仪表自动关机。

FTS2011资料

Drain-to-Source Voltage, VDS – V
5 7 100 IT00445
2.0
PD -- Ta
Allowable Power Dissipation, PD – W
1.5 1.3
M ou nte d
1.0
on a
ce ram ic
0.5
bo ard (10 00 mm 2 ×0 .8m m)
元器件交易网
Ordering number:ENN6355
N-Channel Silicon MOSFET
FTS2011
Load Switching Applications
Features
· Low ON resistance. · 2.5V drive. · Mounting height 1.1mm.
2.5
IT00436
Gate-to-Source Voltage, VGS – V
1.2
--2
1.4
VGS=1.0V
5° C
1.6
1.8
IT00437
30
RDS(on) -- VGS
Ta=25°C Static Drain-to-Source On-State Resistance, RDS (on) – mΩ
ASO
IDP=32A ID=8A
10
<10µs
Switching Time, SW Time – ns
3 2 100 7 5 3 2 10 7 5 3 2 0.1 0.1 2 3 5 7
1m
10
m s
100µs
Drain Current, ID – A
10 7 5 3 2 1.0 7 5 3 2

数字无线调车灯显设备用户手册

数字无线调车灯显设备用户手册（2011版）北京中瑞特科技有限公司China Radio Telecommunication Science and Technology Co.,Ltd.2011年7月目录第一章系统介绍一、系统构成二、主要设备各部分图解说明第二章系统设备安装及使用一、系统设备安装条件二、固定设备（区长台）的安装三、区长台的使用四、便携手台参数设置五、车载设备（机控器）的安装及使用第三章数字无线调车灯显设备系统使用一、调车员手持台的使用二、制动员手持台的使用三、平面无线调车系统领车功能的使用四、内置录音及调车数据下载五、调车单传输管理系统的使用六、手持台电子调车单的使用七、车载台电子调车单的使用附录一：无线调车系统指令表附录二：安装工具和材料第一章系统介绍数字无线调车灯显设备是北京中瑞特通讯科技有限公司（以下简称中瑞特科技）研制的模拟调车灯显设备的换代产品，用于铁路现场平面调车业务。

系统具备的主要功能特点有：1）满足《铁路平面无线调车设备技术条件》TB/T 2834-2002规定的技术要求；2）实现调车信令强插；3）节省频率资源；4）系统功能具备更强的拓展性；5）具有更强的抗外界干扰能力；6）更好的安全防护性；7）可实现调车作业通知单电子化。

一、系统构成整个系统主要由机车设备、固定设备、便携设备三大部分组成。

三部分的组成分述如下：机车设备：以车载台（又称机控器）为核心，完成调车指令的识别、显示、回示。

附属设备有手咪。

便携设备:调车员、制动员调车专用手持电台，有带显示屏（P8800D）和不带显示屏（P8800）两种型号。

主要用于调车人员向车载台发送指令，以指挥机车作业，还可以与司机及调车组人员之间进行通话。

固定设备:以固定台（又称区长台）为核心，完成调车区长与调车组之间的联络通信。

图1：平面无线调车系统构成示意图二、主要设备各部分图解说明图2-1：车载台前面板车载台前面板各部分说明：1、内置麦克风2、电源灯（电量不足时闪烁）3、红一灯4、绿灯5、黄灯6、红二灯7、手咪接口8、内置电台写频接口 9、内置扬声器 10、区域切换按键11、应急通话键 12、折叠手提把手 13、肩带扣环14.音量旋钮 15.信道选择旋钮 16.天线接口图2-2：车载台后面板车载台后面板各部分说明：1、外接灯显接口2、与机车运行监控记录器连接输出接口3、综合接口4、电源开关5、USB接口（下载时插入专用U盘）6、电池调单车载台各部分说明：1、录音指示灯2、内置PTT3、喇叭4、电源指示灯5、天线（可更换）6、信道旋钮7、手咪接口8、综合接口9、USB接口 10、红一灯 11、绿灯 12、黄灯 13、红二灯 14.电源模块开关 15.数据线接口 16.显示屏P8800手持电台前面板各部分说明：1.电源/音量开关2.信道旋钮3.本机天线4.本机PTT按键5.麦克风窗口6.内置扬声器窗口7.红色按键8.绿色按键9.黄色按键10.本机型号标识图3-1： P8800手持电台P8800d手持电台前面板各部分说明：1.电源/音量开关2.信道旋钮3.本机天线4.显示屏5.红色按键6.绿色按键7.黄色按键8.本机型号标识9. 内置扬声器窗口10. 麦克风窗口 11. 界面切换按键12. 本机PTT按键 13.上翻页按键 14.下翻页按键图3-2： P8800d手持电台图4-1：固定台前面板固定台前面板各部分说明：1.内置电台电源开关2.音量调节旋钮3.手咪接口4.收发指示灯5.呼叫状态指示灯6.呼叫成功状态指示灯7.信道状态显示 8信道+ 9信道- 10.功能键1 11.功能键2 12.电台内置扬声器图4-2：固定台后面板固定台后面板各部分说明：1.交流220V电源插座（内置2A/250V保险管）2.交流220V电源开关3.PC接口4.综合接口5.外接天线接口6.编程接口第二章系统设备安装及使用一、系统设备安装条件1.安装前的准备工程技术人员与现场负责人进行沟通，确定设备的安装计划，与各部门协调好工作，尽量减少对正常调车作业的影响。

2路全数字视频光端机说明书

1-8路视频光端机--------------------------------------------------------------------------------------------------------------------------------说明书目录目录----------------------------------------------------------------------------------------------------------------------1 安全使用须知---------------------------------------------------------------------------------------------------------2 产品概述---------------------------------------------------------------------------------------------------------------3 产品特点---------------------------------------------------------------------------------------------------------------3 技术指标---------------------------------------------------------------------------------------------------------------4 光学指标---------------------------------------------------------------------------------------------------------------4 视频指标---------------------------------------------------------------------------------------------------------------4 数据指标---------------------------------------------------------------------------------------------------------------4 一般指标---------------------------------------------------------------------------------------------------------------4 应用范围---------------------------------------------------------------------------------------------------------------5 光发射机面板说明--------------------------------------------------------------------------------------------------5 前面板说明------------------------------------------------------------------------------------------------------------5 后面板说明------------------------------------------------------------------------------------------------------------6 光接收机面板说明--------------------------------------------------------------------------------------------------6 前面板说明------------------------------------------------------------------------------------------------------------6 后面板说明------------------------------------------------------------------------------------------------------------6 自备电源说明---------------------------------------------------------------------------------------------------------7 安装说明---------------------------------------------------------------------------------------------------------------8 安装前说明------------------------------------------------------------------------------------------------------------8 安装顺序---------------------------------------------------------------------------------------------------------------8 连接示意图------------------------------------------------------------------------------------------------------------9 责任说明--------------------------------------------------------------------------------------------------------------10安全使用须知为了防止对您，他人财产造成损害，请您务必遵守下列事项：本设备在设计使用范围内具有良好的可靠性能，但仍应避免人为对设备造成的损害或破坏。

FT1A系列控制器产品说明书

General SpecificationsNote 2: See SmartAXIS Touch User’s Manual FT9Y-B1390(2) for I/O derating.Note 3: Operation not guaranteed when used with certain types of oils.FT1A TouchKey FeatureS• 3.8” HMI+PLC• Models with 12 or 14 I/O • Embedded RJ45 Ethernet Port • Modbus TCP or RTU • Built-in 2 analog inputs • Built-in 2 analog outputs • Optional Analog Cartridges • PID Controls• USB Maintenance Port• Seamless interface with other PLCs • Class 1 Div. 2 Hazardous Locations • -20 to 55 degree C operating temp.• IP66f, Nema 4X (indoor), 13The FT1A SmartAXIS Touch combines operator interface and control in a single compact package, all programmable with IDEC’s PC-based software. The FT1A Touch isavailable in 12 I/O and 14 I/O configurations with analog I/O expansion capability suitable for advanced analog monitoring and control.All-in-one touchscreeninterface and logic controllerNote 2: Not isolated from internal circuits.Note 2: Brightness of LCD only (monochrome LCD: when lit white).Note 1: The up-to-date information on the connectable PLC can be obtained from /language.Note 1: High-speed output terminal (100 kHz pulse output terminal): 5 μs max. Normal output terminal (including 5kHz pulse output terminal): 100 μs max.Note 2: Overshoot may occur under light load conditions. Overshoot can be suppressed by inserting a damping resistor. Damping resistor value: approx. 150Ω including the input impedance.analog expansion Cartridge Specifications (FC6a-P)All dimensions in mm.Mounting Hole Layout66.0+10105.0+10Ft1a-*12ra-*Ft1a-*14*a-*Dimensionsrelay Output Model (Ft1a-12ra-*)When using mounting bracket (HG9Z-4K2PN04)t ransistor Output Model (Ft1a-14Ka-* / Ft1a-14Sa-*)When using mounting bracket (HG9Z-4K2PN04)When using rear mount adapter (Ft9Z-1a01)When using rear mount adapter (Ft9Z-1a01)4-R 4.254.011.8116.0100.04-M3tapped hole77.090.057.74-ø4.070.097.098.0105.0125.0LCD active areaLCD TypeX Y TFT 88.9237.05STN87.5935.49Note: Waterproof characteristic may not be obtained de-pending on the panel material and size.All dimensions in mm.t erminal arrangement and I/O Wiring Diagram examplest ouch (Display Model)Ft1a-*12ra-*For terminal arrangement and I/O wiring diagram, see User’s Manual.Ft1a-*14Ka-*Ft1a-*14Sa-*recommended Ferrules for t ouch/Pro/Lite t erminalsFor 1-wire connectionL1L2d 2S 1d 1S 2For 2-wire connectionL1L2d2S 1d 1d 3S 2Note: Crimping pliers - Phoenix Contact part number CRIMPFOX ZA3 (12101882)。

FTTx网络系统终端设备说明书

Instruction Manual1.Description:The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, and distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.2.Features:1.Total enclosed structure.2.Material: PP, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP65.3.Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.4.Cable, pigtails, and patch cords are running through their own paths without disturbing each other, micro type PLC splitter installation, easy maintenance.5.Distribution panel can be flipped up, feeder cable can be placed by expression port, easy for maintenance and installation.6.Box can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor use.3.Specification:1.Environmental requirementWorking temperature: -40℃～+85℃Relative humidity: ≤85% (+30℃)Atmospheric pressure: 70KPa~106Kpa2.Main technical datasheetInsertion loss: ≤0.15dBUPC return loss: ≥50dBAPC return loss: ≥60dB3.Thunder-proof technical datasheetThe insulation resistance between the grounding device and the metal parts of the box is no less than 24⨯MΩ/500V (DC); IR≥2410⨯MΩ/500V.10The voltage resistance between the grounding device, and the box and its metal parts is no less than 3000V (DC)/min, no puncture, no flashover; U≥3000V4.Configuration table:Instruction ManualPic 1 Box Size Pic 2 Installation Size5.Product cable ways:Pic.3 Cable Ways6.Installation:1.Wall-mounted installationDrill 4 holes into the wall based on the size in table 1, place the expansion bolt Φ7.5*40, place the box to match up the holes and use bolt to fasten. (Pic 4)2.Pole-mounted installationFix 1 set of the pole ring to the telecom pole (Pic 5)3.The overhead structureTie the two installed on the chassis of the overhead hung on the wire, and then bolted, prevent the case fall off.(Pic 6)Instruction ManualPic 4 Wall mounted installation Pic 5 Pole mounted installationPic 6 The overhead structure7.Accessories:ers' Manual*12.Accessories Bag*13.Pole Ring*2 (Option)。

FTR-01中文说明书2021-10-27故障录波

FTR-01中文说明书2021-10-27故障录波FTR-01 电力系统故障录波及分析装置用户手册 FTR-01H 便携式电力系统故障录波及分析装置用户手册武汉方得电子有限公司?????? Wuhan Fount Electronics Co., Ltd. Document Number WH40-9101-03 Version 2021-10-27FTR-01电力系统故障录波及分析装置用户手册 FTR-01H便携式电力系统故障录波及分析装置用户手册本手册内容如有更改，恕不通告。

没有武汉方得电子有限公司的书面许可，本手册任何部分都不许以任何（电子的或机械的）形式、方法或以任何目的而进行传播。

是武汉方得电子有限公司的商标ReplayB 是武汉方得电子有限公司的商标 Windows 是微软公司的商标所有其他公司的商标和知识产权在本手册中都予以认可?2021武汉方得电子有限公司版权所有中华人民共和国湖北省武汉市东湖开发区关山二路特1号国际企业中心栖凤楼B 座4层电话 +86 027 8266 8396 传真 +86 027 6784 8757 邮政编码 430074 E-mail: whft@Information of modifying2021-07-03 2021-07-04 2021-07-05 2021-07-09 2021-07-10 2021-07-12 2021-07-13 2021-07-18 2021-07-20 2021-11-02 2021-07-21 2021-09-22 2021-10-27FTR-01型电力系统故障录波及分析装置用户手册I目录第一章FTR-01的系统功能及技术指标............................................................................ .............. １1.1 装�Z概述 ........................................................................... ............................................................... １ 1.1.1 用途 ........................................................................... .................................................................. １ 1.1.2 FTR-01结构体系 ........................................................................... ......................................... １ 1.1.3 输入信号 ........................................................................... ......................................................... １ 1.2 系统新特性 ........................................................................... .......................................................... １ 1.2.1 软件与硬件 ........................................................................... .................................................... １ 1.2.2 高抗干扰性 ........................................................................... .................................................... ２ 1.2.3 专用DSP .......................................................................... ......................................................... ２ 1.2.4 高速的PCI总线 ........................................................................... .......................................... ２ 1.2.5 工频信号自动频率跟踪 ........................................................................... ............................. ２ 1.2.6 采集单元远距离分布式安装 ............................................................................................... ２ 1.3 主要技术指标 ........................................................................... ...................................................... ２ 1.4 设备的选配 ........................................................................... ........................................................ ４ 1.4.1 设备型号的定义 ........................................................................... ........................................... ４ 1.4.2 开关量扩展 ........................................................................... .................................................... ４ 1.4.3 可供选用的型号 ........................................................................... ........................................... ４第二章 2.1 2.2 2.3 2.4 第三章FTR-01的被测输入量的接入 ........................................................................... ................... ５交流电压量的接入 ........................................................................... .......................................... ５交流电流量的接入 ........................................................................... .......................................... ５开关量的接入 ........................................................................... ................................................... ６数据采集单元(RAU)量程的硬件调整 ........................................................................... ....... ７ FTR-01的面板功能 ........................................................................... ..................................... ８3.1 FTR-01前面板 ........................................................................... .................................................... ８ 3.2 面板功能 ........................................................................... ............................................................... ８ 3.2.1 状态指示灯 ........................................................................... .................................................... ８ 3.2.2 液晶屏功能指示 ........................................................................... ........................................... ８ 3.3 功能菜单 ........................................................................... ............................................................... ９ 3.4 功能菜单的使用 ........................................................................... ............................................. １０ 3.4.1 通道监控 ........................................................................... ..................................................... １０ 3.4.2 记录列表 ........................................................................... ..................................................... １０ 3.4.3 打印机配�Z .......................................................................... ................................................. １１ 3.5 FTR-01后面板与功能 ........................................................................... .................................. １２ 3.5.1 FTR-01后面板布�Z .......................................................................... .................................. １２ 3.5.2 FTR-01后面板结构与功能 ........................................................................... ................... １２ 3.6 RAU后面板与功能 ........................................................................... ....................................... １３ 3.6.1 RAU后面板 ........................................................................... ............................................... １３ 3.6.2 RAU后面板布�Z与功能 ........................................................................... ........................ １３第四章软件“FTR录波器管理系统” ......................................................................... .............. １４______________________________________________________________________________ __________________________ 武汉方得电子有限公司 Wuhan Fount Electronics Co.,Ltd. Document Number WH40-9101-03 Version 2021-10-27IIFTR-01型电力系统故障录波及分析装置用户手册录波器管理系统” ......................................................................... ............... １４“FTR录波器管理系统”运行环境 ...................................................................................... １４ FTR-01与后台的连接 ........................................................................... .................................. １４ 4.3.1 网络物理连接............................................................................ ........................................... １４ 4.3.2 网络连通的试验 ........................................................................... ....................................... １４ 4.4 使用MODEM进行远方传送 ........................................................................... ........................ １５ 4.5 安装和运行软件“FTR录波器管理系统” ...................................................................... １６ 4.6 FTR录波器管理系统（REPLAYB）件 ........................................................................... ..... １７ 4.7 FTR录波器管理系统（REPLAYB）对FTR-01设备群的管理 .................................... １８ 4.7.1 在软件ReplayB中添加子站名称及设备名称 ............................................................ １８4.7.2 获取FTR-01的前台配�Z .......................................................................... ........................ １９4.2 4.3什么是“FTR第五章 FTR-01输入通道属性的描述与起动的整定 ............................................................... ２０5.1 模拟通道属性的描述 ........................................................................... .................................... ２０ 5.2 模拟通道起动录波的设�Z .......................................................................... ............................ ２１ 5.3 开关量输入通道属性的设�Z .......................................................................... ....................... ２２ 5.4 记录格式的设定 ........................................................................... ............................................. ２３ 5.4.1 瞬态故障DFR （Disturbance Fault Recording）记录格式的设�Z ....................... ２３5.4.2 连续稳态记录CSS（Continuous Steady State recording）记录格式的设�Z ...... ２４第六章FTR-01的校准 ........................................................................... .......................................... ２５6.1 校准信号源设备的准备 ........................................................................... ............................... ２５ 6.2 确定硬件量程和通道配�Z .......................................................................... ............................ ２５ 6.3 FTR录波器校准软件 REPLAYCAL 的使用 ......................................................................... ２５第七章 7.1 7.2 7.3 7.4 7.5 7.6 第八章 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.10 8.11 第九章FTR-01故障记录的读取 ........................................................................... ........................ ２８在REPLAYB中选定目标设备 ........................................................................... ..................... ２８设�Z数据抽取策略 ........................................................................... ......................................... ２９瞬态故障记录文件DFR （DISTURBANCE FAULT RECORDING）的提取 ...................... ２９连续式稳态记录CSS（CONTINUOUS STEADY STATE RECORDING）文件的提取 ...... ３０触发式稳态记录TSS（TRIGGERED STEADY STATE RECORDING）文件的读取 ......... ３１故障记录文件的断点续传 ........................................................................... ........................... ３２使用软件CMDVIEW观察分析故障记录 ................................................................... ３４打开故障记录 ........................................................................... .................................................. ３４ CMDVIEW工具栏图标的功能 ........................................................................... ..................... ３５选择显示通道 ........................................................................... .................................................. ３６通道交换显示位�Z .......................................................................... .......................................... ３６改变波形和背景的颜色 ........................................................................... ............................... ３６使若干通道幅度的比例尺一致与通道的叠加 .................................................................. ３７移动时标 ........................................................................... ........................................................... ３７记录排序与检索 ........................................................................... ............................................. ３８记录的EXCEL格式输出 ........................................................................... ............................... ３８记录的COMTRADE格式输出 ........................................................................... ............... ３９记录的打印输出 ........................................................................... ............................................. ３９在CMDVIEW中输入线路参数信息 ............................................................................ ４０________________________________________________________________________________________________________ 武汉方得电子有限公司 Wuhan Fount ElectronicsCo.,Ltd. Document Number WH40-9101-03 Version 2021-10-27FTR-01型电力系统故障录波及分析装置用户手册9.2 9.3在III“定义线路”的概念 ........................................................................... .................................... ４０CMDVIEW中定义线路的方法 ........................................................................... ............... ４０定义线路参数表的应用 ........................................................................... ............................... ４１ FTR-01互感器配�Z ............................................................................................................ ４２互感器（或其他传感器）的配�Z .......................................................................... ............ ４２用计算量起动FTR-01与稳态量录波的指定 .......................................................... ４５第十章 10.1 第十一章 11.111.2 11.3计算量的概念 ........................................................................... .................................................. ４５设�Z计算量起动录波 ........................................................................... .................................... ４５连续稳态量CSS（CONTINUOUS STEADY STATE RECORDING）记录内容的指定 ...... ４７第十二章 12.1 12.2 12.3 第十三章 13.1 13.2 第十四章用FTR-01实时监测电力系统的远程模拟盘 .......................................................... ４８实时监测的概念 ........................................................................... ......................................... ４８用户自行设计的实时监测界面 ........................................................................... .............. ４８在系统图中添加监测点 ........................................................................... ........................... ４９FTR-01日志查阅 ........................................................................... .................................. ５０FTR-01的日志 ........................................................................... ............................................ ５０ FTR-01日志读取方法 ........................................................................... .............................. ５０用保护动作量起动FTR-01 ........................................................................... ................ ５１14.1 保护动作量起动录波的慨念 ........................................................................... .................. ５１ 14.2 设�Z保护动作量起动录波 ........................................................................... ....................... ５１ 14.3 各种保护动作量的整定 ........................................................................... ........................... ５３ 14.3.1 发电机比率制动式纵差保护(DL/T 684-1999, P2, 4.1.1) ....................................... ５３ 14.3.2 发电机标积制动式纵差保护(DL/T 684-1999, P4,4.1.2) ....................................... ５３ 14.3.3 发电机故障分量比率制动式纵差保护(DL/T 684-1999, P4, 4.1.3) ..................... ５４ 14.3.4 发电机单元件横差保护(DL/T 684-1999, P6,4.1.5b) .............................................. ５４ 14.3.5 发电机纵向零序过电压保护(DL/T 684-1999, P8,4.1.7) ....................................... ５５ 14.3.6 发电机故障分量负序方向保护(DL/T 684-1999, P8, 4.1.9) ................................... ５５14.3.7 发电机三次谐波电压单相接地保护(DL/T 684-1999, P10,4.3.2a) ..................... ５６ 14.3.8 发电机阻抗法低励失磁保护 ........................................................................... .............. ５６ 14.3.9 以系统两点间相位差为依据的失步保护 .................................................................. ５７14.3.10 发电机定子铁心过励磁保护(DL/T 684-1999, P24,4.8.1) ................................. ５７ 14.3.11 发电机频率异常保护(DL/T 684-1999, P24, 4.8.2) ............................................... ５８14.3.12 发电机逆功率保护(DL/T 684-1999, P24,4.8.3) ................................................... ５８ 14.3.13 发电机定子过电压保护(DL/T 684-1999, P24,4.8.4) .......................................... ５８ 14.3.14 变压器纵差保护(DL/T 684-1999, P25,5.1) ........................................................... ５９ 14.3.15 变压器零序差动保护(DL/T 684-1999, P31,5.3.1) ............................................... ５９ 14.3.16 变压器过流保护(DL/T 684-1999, P32, 5.5.1 P33, 5.5.2) .............................. ６０ 14.3.17 空载投运变压器保护 ........................................................................... ........................ ６０ 14.3.18 启停机保护(DL/T 684-1999, P25,4.8.5) ................................................................. ６０第十五章FTR-01用于电力设备的试验 ........................................................................... ........... ６１15.1 试验的抽象 ........................................................................... .................................................. ６１ 15.2 试验的设计 ........................................................................... .................................................. ６２ 15.2.1 可选择的试验变量 ........................................................................... ................................ ６２______________________________________________________________________________ __________________________ 武汉方得电子有限公司 Wuhan Fount Electronics Co.,Ltd. Document Number WH40-9101-03 Version 2021-10-27感谢您的阅读，祝您生活愉快。

2011.pdf用户手册说明书

USER M A N UA L
MODEL 2011
High Speed Asynchronous to Synchronous Converter
Part# 07M2011-A Doc# 062021UA Revised 03/16/94
SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007
2.1 FEATURES
• Conforms to CCITT V.22 and V.14 standards • Lets asynchronous terminals communicate with synchronous
modems and multiplexers • Accepts character lengths to 11 bits • Requires no AC power or batteries • Supports data rates to 64 Kbps • Automatically adjusts synchronous data rates • Miniature size • Plugs directly into async. or sync. DB-25 port • Accepts external clocking • Made in the USA
2
Async. Female Connector Sync. Male Connector
3.0 CONFIGURAT I O N The Model 2011 is configured using internal DIP switches. Figure 1 shows the location of the Model 2011's configuration switches.

FT-7800中文说明书

FT-7800中文说明书一、设定频率1、在主机上设定（1）打开电源（2）按(V/M.MW)键进入VFO(频率)状态；（3）短按（BAND.SET）键设定您将使用的频段，如144段或430段或850段；（4）旋转频道旋钮来设定您要使用的频率，短按一下（MHz.PRI）键，将直接调整频率显示小数点前的数字。

2、用手咪直接设定（ MH-48手咪）（1）打开电源；（2）按(V/M.MW)键进入VFO(频率)状态；（3）把您要使用的频率直接用手咪上的数字键输入。

二、设定亚音频1、按（BAND.SET）键一秒以上，进入操作菜单，用旋转频道旋钮选择至菜单第44项TN FRQ ，轻按一下（BAND.SET）键进入该选项，用旋转频道旋钮选择您需要的亚音值，然后按（BAND.SET）键一秒以上，退出操作菜单。

2、按一下（TONE.HM/RV）键，显示ENC ，3秒后将自动返回频率显示，屏幕将显示ENC的小字，亚音设置完毕。

三、设定差频1、消除电台默认亚音.按（BAND.SET）键一秒以上，进入操作菜单，用旋转频道旋钮选择至菜单第4项ARS ,轻按一下（BAND.SET）键进入该选项，用旋转频道旋钮选择OFF ,然后按（BAND.SET）键一秒以上，退出操作菜单。

2．设定差频值.按（BAND.SET）键一秒以上，进入操作菜单，用旋转频道旋钮选择至菜单第39 项SHIFT ,轻按一下（BAND.SET）键进入该选项，用旋转频道旋钮选择您所需要的差频值,然后按（BAND.SET）键一秒以上，退出操作菜单。

3．激活差频. 按（BAND.SET）键一秒以上，进入操作菜单，用旋转频道旋钮选择至菜单第33项RPT.MOD,轻按一下（BAND.SET）键进入该选项，用旋转频道旋钮选择﹢或﹣选择上差频或下差频，然后按（BAND.SET）键一秒以上，退出操作菜单。

差频设置完毕。

四、存储频率1．按上面所述步骤选择好您需要存储的频率、差频值、亚音值；2．按(V/M.MW)键一秒以上，屏幕左上角的数字会跳动，用旋转频道旋钮选择您需要存储的信道数字；3．选择好信道数字后按(V/M.MW)键，这时屏幕会显示一排断续的横线，此时用旋转频道旋钮选择您需要存储的信道名称，可选择英文字母或数字，如不需要存储，按手咪PTT键即可跳过，频率存储完毕。

2011 第4章 EMIF

根据DSP器件的不同，EMIF数据总线可以是32位、16位或 8位。
4.1 EMIF接口信号
主要特点是：
系统需要为C67x提供一个外部时
钟。该外部时钟由ECLKIN输入后会产生EMIF接口的时钟信号 ECLKOUT。
SBSRAM接口、SDRAM接口和
异步接口的信号合并复用。由于不需要进行后台刷新，系统中允许同时具有这3种类型的存储器。
SDRSZ
1h:12行 2h:13行 0:9列
SDCSZ
1h:8列 2h:10列
RFEN INIT TRCD TRP TRC
0,1 0,1 0-Fh
SDTIM寄存器
字位名称
值 0-3h
使用说明控制SDRAM刷新次数
0
XRFR 1h
1次刷新
2次刷新
2h
3h
3次刷新
4次刷新
CNTR
PERIOD
0-FFFh
0-FFFh
当前刷新计数器的数值
设置刷新周期数
SDEXT寄存器
字位名称 WR2RD WR2DEAC
值 0~1 0~3h
使用说明设置写操作与读操作之间最小的间隔时钟周期设置写操作与DEAC/DCAB操作之间最小的间隔时钟周期
WR2WR R2WDQM
RD2WR RD2DEAC RD2RD THZP TWR TRRD TRAS TCL
SDCTL寄存器
字位名称 SDBSZ
值 0:2Banks பைடு நூலகம்:4Banks 0:11行
使用说明一个Bank选择引脚两个Bank选择引脚 11根行地址线 12根行地址线 13根行地址线 9根列地址线 8根列地址线 10根列地址线刷新使能字位。初始化字位设置SDRAM的tRCD值设置SDRAM的tRP值设置SDRAM的tRC值

纵贯“2011”(后端篇)

时编码，其余通道支持CIF/QCIF实时编码； VGA、VIDEO OUT1可同时进行画面预览，其中输出主口可进行
菜单操作；支持4路同步回放；经济实用性极高。
产品形态
DS-7800H-ST系列 DS-7800H-SE系列 DS-7800H-SN系列
DS-7800系列
所有机型支持1个eSATA接口。
特别说明
支持视频环通输出；无音频输入。
附：81与81ST系列对比
功能篇
视频输出
CVBS缩放 eSATA盘
倒放
DS-8100系列
DS-8100ST系列
VGA、Video OUT不能同时输出，根据开机时是否连接
VGA决定输出口优先级
支持VGA、主BNC、辅BNC 同时输出。分为主输出（包含菜单）、输出辅口（支持多画面预览）、辅助输出（单画面预览）3种输出类型，根据是否连接VGA决定
HH.264HFra bibliotekHDMI视频输出接口
T
增强型
S
SATA硬盘接口
R
支持RAID功能
C
CIF，音频
L
CIF，音频
S
CIF，无音频
E
2CF，音频
F
4CIF，音频
W WD1，音频
产品定位
编码分辨率 WD1
4CIF DCIF 2CIF
CIF
目前产品
8000HF-S
8000HT-S 8000HE-S 8000HC-S 8000HS-S
16路：1.5U（19寸） 16路：1U（19寸） 16路：1U
附：经销商专用系列产品
DS-8800系列
DS-8800H-ST系列 DS-8800H-S系列

SmartAVI 1000FT SXGA 音频 RS-232 和 IR 通过 Cat5 扩展器说明书

HARDWARE INSTALLATION
1. Connect the output of the computer video card to the video input of the transmitter using the included male to male video cable.
FEATURES
• Supports dual screens • Uses easy to install, inexpensive CAT-5/5e/6/7/8 • Each output reaches up to 1,000 feet (300 m) • Supports high resolution video up to 1900x1200 • HDTV compatible (720p, 1080i, 1080p) • 300 MHz bandwidth • Sends high-resolution VGA, stereo audio signals, RS-
sate for cable length • Compact metal case enclosure • External power supply • RS-232 communication support to single or multiple
displays • IR command to single or multiple displays
NOTE: You can not use RS232 and IR at the same time. 6. Connect CAT5 cable (coming from the transmitter) to the back of the receiver. 7. Connect 1-2 display monitors to the VGA out connectors on the front of the receiver. 8. Connect 1-2 sets of external speakers to the audio output connections on the front of the unit (Standard 3.5 mm stereo

FT系列频率转速线速表说明书

1. 5/ 10 =0 .1 5（米）
7 .3 仪表与传感器接线范例使用前请调整仪表内部功能, 请打开机壳的翻盖门，从上往下翻开。
↓
按键及▲键选择测量周期
按MOD键 (注:没有这个菜单出现时表示测量周期自动转换)
仪表功能参数一览表：
提示符名称
说
明
出厂值
(测量周期)
测量范围
1秒
1～5000Hz(频率)； 60～99999 转 / 分钟(转速)
2秒
0.5～5000Hz(频率)； 30～99999 转 / 分钟(转速)
5秒
0.2～5000Hz(频率)； 12～99999 转 / 分钟(转速)
99999 设定值Hi H y↑
设定值LO H y↑ 0
输出LO
输出Hi
说明： 1、图中 HY 为仪表的回差值(滞环),
为了防止继电器跳动过于频繁； 2、一路输出的仪表无 GO 及 LO 这两个输出； 3、要 GO 输出必须在订货时加以说明，
控制值参数设定流程：
测量状态
↓按键1 秒
按键及▲键修改高预置值，
W
L
w
a
▲▲ ▲
▲
H
h
b
型号 FT4 FT7 FT8
面板尺寸(H × W) 48 × 48 72 × 72 48 × 96
壳体尺寸 (h × w × L ) 45 × 45 ×90 68 × 68 ×80 45 × 91 ×90
开孔尺寸(a × b) 30 ×25 30 ×25 30 ×25
5 、测量值与输出报警关系图、控制值参数设定流程
▲
(Hz)及转速表用时无此参数设定。线速
↓按MOD键